HUAWEI-IPDSLAM-PPPOE-MIB
54 objects
The mib is used for defining the MIB objects of the pppoe single-mac, pppoe simulation and pppoe client.
Imported Objects
| HUAWEI-MIB | huaweiUtility |
| IF-MIB | ifIndex InterfaceIndex |
| SNMPv2-SMI | Gauge32 Integer32 IpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | DateAndTime MacAddress RowStatus TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2011.6.107 | IdentityhwIpDslamPPPoE | The mib is used for defining the MIB objects of the pppoe single-mac, pppoe simulation and pppoe client. | ||
| 1.3.6.1.4.1.2011.6.107.1 | ScalarhwIpDslamPPPoEMacMode | read-write | current | Used for setting and querying the MAC address mode of a PPPoE user. Options: 1. multiMac(1) -indicates the multiple MAC address mode of the PPPoE user 2. singl… |
| 1.3.6.1.4.1.2011.6.107.2 | TablehwPPPoESmltAdminTable | not-accessible | current | Used for starting or stopping the PPPoE dialup simulation service, and for querying the result of the simulated PPPoE dialup. The index of this table is hwPPPo… |
| 1.3.6.1.4.1.2011.6.107.2.1 | RowhwPPPoESmltAdminEntry | not-accessible | current | Used for starting or stopping the PPPoE dialup simulation service, and for querying the result of the simulated PPPoE dialup. The index of this entry is hwPPPo… |
| 1.3.6.1.4.1.2011.6.107.2.1.1 | ColumnhwPPPoESmltObjIndex | read-only | current | Indicates the index of hwPPPoESmltAdminTable. This leaf means the dialup ID. Currently, only one user is supported. The maximum value of the index is 1. If you… |
| 1.3.6.1.4.1.2011.6.107.2.1.2 | ColumnhwPPPoESmltSrvFlowIndex | read-write | current | Indicates the service port ID. Here, it refers to the ID of a service port that is already created on the current device. The service port ID on the NMS is lar… |
| 1.3.6.1.4.1.2011.6.107.2.1.3 | ColumnhwPPPoESmltUserName | read-write | current | Indicates the user name. |
| 1.3.6.1.4.1.2011.6.107.2.1.4 | ColumnhwPPPoESmltUserPassword | read-write | current | Indicates the user password for authentication. |
| 1.3.6.1.4.1.2011.6.107.2.1.5 | ColumnhwPPPoESmltAuthMode | read-write | current | Indicates the user authentication mode. Currently, the device supports two modes, Options: 1. chap(1) -Challenge-Handshake Authentication Protocol mode 2. pap(… |
| 1.3.6.1.4.1.2011.6.107.2.1.6 | ColumnhwPPPoESmltOverTime | read-write | current | Indicates the test timeout time. It is an optional parameter. Unit: second Range: 5-60 Default: 5 |
| 1.3.6.1.4.1.2011.6.107.2.1.7 | ColumnhwPPPoESmltCurrentPhase | read-only | current | Indicates the current stage of the simulation. Options: 1. discovery(1) -indicates the discovery stage of PPPoE dialup 2. lcp(2) -indicates the LCP negotiation… |
| 1.3.6.1.4.1.2011.6.107.2.1.8 | ColumnhwPPPoESmltResult | read-only | current | Indicates the simulation result. Options: 1. success(0) -indicates the PPPoE simulation is success 2. otherError(1) -indicates other errors 3. timeout(2) -indi… |
| 1.3.6.1.4.1.2011.6.107.2.1.9 | ColumnhwPPPoESmltStartTime | read-only | current | Indicates the simulation start time. Data type: DateAndTime. For example, 2010-2-6,1:38:50.0,+8:0. |
| 1.3.6.1.4.1.2011.6.107.2.1.10 | ColumnhwPPPoESmltEndTime | read-only | current | Indicates the simulation end time. Data type: DateAndTime. For example, 2010-2-6,1:38:50.0,+8:0. |
| 1.3.6.1.4.1.2011.6.107.2.1.11 | ColumnhwPPPoESmltUserSessionId | read-only | current | Indicates the obtained session ID of the user. Range: 1-4294967295 |
| 1.3.6.1.4.1.2011.6.107.2.1.12 | ColumnhwPPPoESmltUserIp | read-only | current | Indicates the obtained IP address of the user. Data type: IpAddress. |
| 1.3.6.1.4.1.2011.6.107.2.1.13 | ColumnhwPPPoESmltGatewayIp | read-only | current | Indicates the obtained gateway IP address. Data type: IpAddress. |
| 1.3.6.1.4.1.2011.6.107.2.1.14 | ColumnhwPPPoESmltRowStatus | read-create | current | Indicates the row status. It is used for starting or stopping the PPPoE dialup simulation service. Only options active(1), createAndGo(4), and destroy(6) are s… |
| 1.3.6.1.4.1.2011.6.107.2.1.15 | ColumnhwPPPoESmltUserMac | read-write | current | Indicates the user-side MAC address. It is an optional parameter. By default, it is bridge MAC address. |
| 1.3.6.1.4.1.2011.6.107.3 | TablehwPPPoEClientConfigTable | not-accessible | current | Used for setting and querying the configuration information about a PPPoE client. The index of this table is hwPPPoEClientConfigName. |
| 1.3.6.1.4.1.2011.6.107.3.1 | RowhwPPPoEClientConfigEntry | not-accessible | current | Used for setting and querying the configuration information about a PPPoE client. The index of this entry is hwPPPoEClientConfigName. |
| 1.3.6.1.4.1.2011.6.107.3.1.1 | ColumnhwPPPoEClientConfigName | not-accessible | current | Indicates the identification of a PPPoE client.Range: 1-32 characters. The PPPoE client identification must be presented in the ASCII codes of the correspondin… |
| 1.3.6.1.4.1.2011.6.107.3.1.2 | ColumnhwPPPoEClientConfigUserName | read-create | current | Used for setting or querying the user name of PPPoE dialup. Range: 1-65 characters. |
| 1.3.6.1.4.1.2011.6.107.3.1.3 | ColumnhwPPPoEClientConfigUserPassword | read-create | current | Used for setting or querying the user password of PPPoE dialup. Range: 0-16 characters. |
| 1.3.6.1.4.1.2011.6.107.3.1.4 | ColumnhwPPPoEClientConfigAuthMode | read-create | current | Used for setting or querying the authentication mode of a PPPoE client. Options: 1. chap(1) -Challenge-Handshake Authentication Protocol mode 2. pap(2) -Passwo… |
| 1.3.6.1.4.1.2011.6.107.3.1.5 | ColumnhwPPPoEClientConfigVlanID | read-create | current | Used for setting or querying the VLAN for the dialup of a PPPoE client. Range: 1-4093 Default: 1 |
| 1.3.6.1.4.1.2011.6.107.3.1.6 | ColumnhwPPPoEClientConfigEnableFlag | read-create | current | Used for setting (enabling/disabling) or querying the status of the PPPoE dialup function. Options: 1. enable(1) -indicates the PPPoE dialup function is enable… |
| 1.3.6.1.4.1.2011.6.107.3.1.7 | ColumnhwPPPoEClientConfigIntervalTime | read-create | current | Used for setting or querying the interval for sending the Echo-Request packet. Range: 1-65535 Unit: second Default: 20s |
| 1.3.6.1.4.1.2011.6.107.3.1.8 | ColumnhwPPPoEClientConfigRetransmitTimes | read-create | current | Indicates the count of retransmitting the Echo-Request packet at timeout. Range: 1-10 Default: 3 |
| 1.3.6.1.4.1.2011.6.107.3.1.9 | ColumnhwPPPoEClientConfigRowStatus | read-create | current | Indicates the row status. It is used for setting, modifying, or deleting the identification of a PPPoE client. Options active(1), createAndGo(4), and destroy(6… |
| 1.3.6.1.4.1.2011.6.107.4 | TablehwPPPoEClientSessionTable | not-accessible | current | Used for setting and querying the information about the session of a PPPoE client. The index of this table is hwPPPoEClientConfigName. To serve as an index, th… |
| 1.3.6.1.4.1.2011.6.107.4.1 | RowhwPPPoEClientSessionEntry | not-accessible | current | Used for setting and querying the information about the session of a PPPoE client. The index of this entry is hwPPPoEClientConfigName. To serve as an index, th… |
| 1.3.6.1.4.1.2011.6.107.4.1.1 | ColumnhwPPPoEClientSessionCurrentPhase | read-only | current | Used for querying the current stage of a PPPoE session. Options: 1. discovery(1) -indicates the discovery stage of PPPoE dialup 2. lcp(2) -indicates the LCP ne… |
| 1.3.6.1.4.1.2011.6.107.4.1.2 | ColumnhwPPPoEClientSessionId | read-only | current | Used for querying the session ID obtained by a PPPoE client. When PPPoE dialup is not performed or the dialup fails, the session ID is an invalid value 4294967… |
| 1.3.6.1.4.1.2011.6.107.4.1.3 | ColumnhwPPPoEClientSessionUserIp | read-only | current | Used for querying the IP address of a PPPoE client. |
| 1.3.6.1.4.1.2011.6.107.4.1.4 | ColumnhwPPPoEClientSessionUserMac | read-only | current | Used for querying the MAC address of a PPPoE client. |
| 1.3.6.1.4.1.2011.6.107.4.1.5 | ColumnhwPPPoEClientSessionGatewayIp | read-only | current | Used for querying the IP address of the gateway to which a PPPoE client is connected. |
| 1.3.6.1.4.1.2011.6.107.4.1.6 | ColumnhwPPPoEClientSessionGatewayMac | read-only | current | Used for querying the MAC address of the gateway to which a PPPoE client is connected. |
| 1.3.6.1.4.1.2011.6.107.4.1.7 | ColumnhwPPPoEClientSessionStartTime | read-only | current | Used for querying the dialup start time of a PPPoE client, in the unit of second. The time value indicates the seconds lapsed from the Greenwich time 1970-01-0… |
| 1.3.6.1.4.1.2011.6.107.4.1.8 | ColumnhwPPPoEClientSessionEndTime | read-only | current | Used for querying the dialup end time of a PPPoE client, in the unit of second. The time value indicates the seconds lapsed from the Greenwich time 1970-01-01 … |
| 1.3.6.1.4.1.2011.6.107.4.1.9 | ColumnhwPPPoEClientSessionDiagnostic | read-only | current | Used for querying the information about a PPPoE dialup result. Options: 1. success(1) -indicates successful PPPoE dialup 2. otherError(2) -indicates other erro… |
| 1.3.6.1.4.1.2011.6.107.5 | NodehwIpDslamPPPoETrapsVbOids | |||
| 1.3.6.1.4.1.2011.6.107.5.1 | ScalarhwIpDslamPPPoESerialNo | accessible-for-notify | current | It indicates Serial Id which is allocated by server. |
| 1.3.6.1.4.1.2011.6.107.6 | NodehwIpDslamPPPoETraps | |||
| 1.3.6.1.4.1.2011.6.107.6.1 | NodehwIpDslamPPPoECommonTraps | |||
| 1.3.6.1.4.1.2011.6.107.6.1.0 | NodehwIpDslamPPPoECommonTrapssPrefix | |||
| 1.3.6.1.4.1.2011.6.107.6.1.0.1 | NotificationhwIpDslamPPPoESmltTrap | current | The trap is generated when PPPoE simulation start . The hwIpDslamPPPoESerialNo indicates Serial Id which is allocated by server, defined in hwIpDslamPPPoETraps… | |
| 1.3.6.1.4.1.2011.6.107.7 | TablehwPPPoESmacCurrentUserTable | not-accessible | current | Used for querying the information about a PPPoE single-MAC user. The indexes of this table are ifIndex and hwPPPoESmacUserIndex. |
| 1.3.6.1.4.1.2011.6.107.7.1 | RowhwPPPoESmacCurrentUserEntry | not-accessible | current | Used for querying the information about a PPPoE single-MAC user. The indexes of this entry are ifIndex and hwPPPoESmacUserIndex. |
| 1.3.6.1.4.1.2011.6.107.7.1.1 | ColumnhwPPPoESmacUserIndex | read-only | current | PPPoE SMAC user index. |
| 1.3.6.1.4.1.2011.6.107.7.1.2 | ColumnhwPPPoESmacUserFlowId | read-only | current | PPPoE user flow ID. |
| 1.3.6.1.4.1.2011.6.107.7.1.3 | ColumnhwPPPoESmacUserSessionId | read-only | current | PPPoE session ID. |
| 1.3.6.1.4.1.2011.6.107.7.1.4 | ColumnhwPPPoESmacSessionUserMac | read-only | current | PPPoE SMAC user MAC address. |
| 1.3.6.1.4.1.2011.6.107.7.1.5 | ColumnhwPPPoESmacVlanID | read-only | current | PPPoE SMAC user VLAN. |