HUAWEI-IPPOOL-MIB
112 objects
The MIB contains objects of module IPPOOL.
Imported Objects
| HUAWEI-MIB | huaweiUtility |
| SNMPv2-SMI | IpAddress MODULE-IDENTITY OBJECT-TYPE |
| SNMPv2-TC | DisplayString RowStatus TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2011.6.8 | IdentityhwIPpool | The MIB contains objects of module IPPOOL. | ||
| 1.3.6.1.4.1.2011.6.8.1 | NodehwIPPoolMibObjects | |||
| 1.3.6.1.4.1.2011.6.8.1.1 | TablehwIPPoolTable | not-accessible | current | Config-list of IP address pool. |
| 1.3.6.1.4.1.2011.6.8.1.1.1 | RowhwIPPoolEntry | not-accessible | current | IP address pool entry. Config-list of IP address pool, used to configure the relevant attributes of the IP address pool inside the device. Used by the AAA modu… |
| 1.3.6.1.4.1.2011.6.8.1.1.1.1 | ColumnhwIPPoolIndex | read-only | current | Exclusive index of address pool. |
| 1.3.6.1.4.1.2011.6.8.1.1.1.2 | ColumnhwIPPoolName | read-create | current | IP address pool name, the service module guarantees the exclusiveness of the name. |
| 1.3.6.1.4.1.2011.6.8.1.1.1.3 | ColumnhwIPPoolRouterIPAddr | read-create | current | Gateway IP address. By default, the mask is 255.255.255.255. |
| 1.3.6.1.4.1.2011.6.8.1.1.1.4 | ColumnhwIPPoolRouterIPMask | read-create | current | Gateway mask. By default, the mask is 255.255.255.255. |
| 1.3.6.1.4.1.2011.6.8.1.1.1.5 | ColumnhwIPPoolPriDNSIPAddr | read-create | current | Primary DNS IP address. By default, it is 255.255.255.255. |
| 1.3.6.1.4.1.2011.6.8.1.1.1.6 | ColumnhwIPPoolSecDNSIPAddr | read-create | current | Second DNS IP address. By default, it is 255.255.255.255. |
| 1.3.6.1.4.1.2011.6.8.1.1.1.7 | ColumnhwIPPoolPriNBNSIPAddr | read-create | current | Primary Netbios IP address. By default, it is 255.255.255.255. |
| 1.3.6.1.4.1.2011.6.8.1.1.1.8 | ColumnhwIPPoolSecNBNSIPAddr | read-create | current | Second Netbios IP address. By default, it is 255.255.255.255. |
| 1.3.6.1.4.1.2011.6.8.1.1.1.9 | ColumnhwIPPoolIPAddrLease | read-create | current | IP address lease: 0~(1000*24*60-1)(m) unit: minute. It is allowed not to specify the lease during the adding. The default value is 3*24*60(m). |
| 1.3.6.1.4.1.2011.6.8.1.1.1.10 | ColumnhwIPPoolStatus | read-create | current | Row admin status, either Add or Del. Supports adding and deletion. |
| 1.3.6.1.4.1.2011.6.8.1.1.1.11 | ColumnhwIPPoolVPNInstance | read-create | current | IP vpn-instance name. |
| 1.3.6.1.4.1.2011.6.8.1.1.1.12 | ColumnhwIPPoolType | read-create | current | |
| 1.3.6.1.4.1.2011.6.8.1.1.1.13 | ColumnhwIPPoolNetwork | read-create | current | Network ip address of a DHCP Server global pool. To delete a configured network ip, please set hwDHCPSGlobalPoolConfigUndoFlag to 1 |
| 1.3.6.1.4.1.2011.6.8.1.1.1.14 | ColumnhwIPPoolNetworkMask | read-create | current | Net mask of a DHCP Server global pool(network). The SET operation to this object ought to be with the SET of hwDHCPSGlobalPoolNetwork together, and any SET ope… |
| 1.3.6.1.4.1.2011.6.8.1.1.1.15 | ColumnhwIPPoolIPTotalNum | read-only | current | the number of total addresses. |
| 1.3.6.1.4.1.2011.6.8.1.1.1.16 | ColumnhwIPPoolIPUsedNum | read-only | current | the number of used addresses. |
| 1.3.6.1.4.1.2011.6.8.1.1.1.17 | ColumnhwIPPoolIPConflictNum | read-only | current | the number of conflict addresses. |
| 1.3.6.1.4.1.2011.6.8.1.1.1.18 | ColumnhwIPPoolIPExcludeNum | read-only | current | the number of exclude addresses. |
| 1.3.6.1.4.1.2011.6.8.1.1.1.19 | ColumnhwIPPoolIPIdleNum | read-only | current | the number of idle addresses. |
| 1.3.6.1.4.1.2011.6.8.1.1.1.20 | ColumnhwIPPoolIPUsedPercent | read-only | current | used percent. |
| 1.3.6.1.4.1.2011.6.8.1.2 | TablehwIPSectionTable | not-accessible | current | Config-list of IP section. |
| 1.3.6.1.4.1.2011.6.8.1.2.1 | RowhwIPSectionEntry | not-accessible | current | IPSection Entry. IP section configuration table, used to manage the IP address of user. There are at most eight address sections to each address pool. Its inde… |
| 1.3.6.1.4.1.2011.6.8.1.2.1.1 | ColumnhwIPSectionIndex | read-only | current | Index of address section. |
| 1.3.6.1.4.1.2011.6.8.1.2.1.2 | ColumnhwIPSectionDesc | read-create | current | IP section DESCRIPTION, which can be empty. |
| 1.3.6.1.4.1.2011.6.8.1.2.1.3 | ColumnhwIPSectionLowAddr | read-create | current | Start of address. |
| 1.3.6.1.4.1.2011.6.8.1.2.1.4 | ColumnhwIPSectionHighAddr | read-create | current | End of address. |
| 1.3.6.1.4.1.2011.6.8.1.2.1.5 | ColumnhwIPSectionLength | read-only | current | IP section's length. |
| 1.3.6.1.4.1.2011.6.8.1.2.1.6 | ColumnhwIPSectionUsedNum | read-only | current | The number of Used addresses. |
| 1.3.6.1.4.1.2011.6.8.1.2.1.7 | ColumnhwIPSectionConflict | read-only | current | The number of conflict addresses. |
| 1.3.6.1.4.1.2011.6.8.1.2.1.8 | ColumnhwIPSectionInvalid | read-only | current | The number of invalid addresses. |
| 1.3.6.1.4.1.2011.6.8.1.2.1.9 | ColumnhwIPSectionAvailableNum | read-only | current | The number of available addresses. |
| 1.3.6.1.4.1.2011.6.8.1.2.1.10 | ColumnhwIPSectionRowStatus | read-create | current | Row admin status, either Add or Del. |
| 1.3.6.1.4.1.2011.6.8.1.3 | TablehwIPPoolExtTable | not-accessible | current | Extend table of the local address pool. When IP addresses are allocated by the built-in DHCP servers, you need to configure the lease and option. |
| 1.3.6.1.4.1.2011.6.8.1.3.1 | RowhwIPPoolExtEntry | not-accessible | current | DESCRIPTION. |
| 1.3.6.1.4.1.2011.6.8.1.3.1.1 | ColumnhwIPPoolAvailableStatus | read-write | current | Whether the address is prohibited. |
| 1.3.6.1.4.1.2011.6.8.1.3.1.2 | ColumnhwIPDhcpOptionId1 | read-write | current | Option ID. When IP addresses are allocated by the built-in DHCP sever, the option is a configuration parameter, which needs to be defined and explained by the … |
| 1.3.6.1.4.1.2011.6.8.1.3.1.3 | ColumnhwIPDhcpOption1 | read-write | current | Value of the option. |
| 1.3.6.1.4.1.2011.6.8.1.3.1.4 | ColumnhwIPDhcpOptionId2 | read-write | current | Option ID. When IP addresses are allocated by the built-in DHCP sever, the option is a configuration parameter, which needs to be defined and explained by the … |
| 1.3.6.1.4.1.2011.6.8.1.3.1.5 | ColumnhwIPDhcpOption2 | read-write | current | Value of the option. |
| 1.3.6.1.4.1.2011.6.8.1.3.1.6 | ColumnhwIPDhcpOptionId3 | read-write | current | Option ID. When IP addresses are allocated by the built-in DHCP sever, the option is a configuration parameter, which needs to be defined and explained by the … |
| 1.3.6.1.4.1.2011.6.8.1.3.1.7 | ColumnhwIPDhcpOption3 | read-write | current | Value of the option. |
| 1.3.6.1.4.1.2011.6.8.1.3.1.8 | ColumnhwIPDhcpOptionId4 | read-write | current | Option ID. When IP addresses are allocated by the built-in DHCP sever, the option is a configuration parameter, which needs to be defined and explained by the … |
| 1.3.6.1.4.1.2011.6.8.1.3.1.9 | ColumnhwIPDhcpOption4 | read-write | current | Value of the option. |
| 1.3.6.1.4.1.2011.6.8.1.3.1.10 | ColumnhwIPDnsSuffix | read-write | current | DNS suffix, a string of 0-32 characters. If the value is 0, it indicates that the suffix is deleted. |
| 1.3.6.1.4.1.2011.6.8.1.4 | TablehwIPAddressStatusTable | not-accessible | current | Address status table. It supports the query and setting of status of the local address pool. It does not support the query and setting of status of the remote … |
| 1.3.6.1.4.1.2011.6.8.1.4.1 | RowhwIPAddressStatusEntry | not-accessible | current | DESCRIPTION. |
| 1.3.6.1.4.1.2011.6.8.1.4.1.1 | ColumnhwIPAddress | read-only | current | IP address. |
| 1.3.6.1.4.1.2011.6.8.1.4.1.2 | ColumnhwIPAddressStatus | read-write | current | Status of the address. |
| 1.3.6.1.4.1.2011.6.8.1.4.1.3 | ColumnhwPoolName | read-only | current | IP address pool name. |
| 1.3.6.1.4.1.2011.6.8.1.5 | TablehwDhcpSvrGroupTable | not-accessible | current | Configuration table of the DHCP server group. To monitor the status of the remote DHCP server, you need to configure the local DHCP server. You can configure a… |
| 1.3.6.1.4.1.2011.6.8.1.5.1 | RowhwDhcpSvrGroupEntry | not-accessible | current | DESCRIPTION. |
| 1.3.6.1.4.1.2011.6.8.1.5.1.1 | ColumnhwIPPoolDhcpSvrGroupIndex | read-only | current | Index of a DHCP server group. When you create an address pool, the equipment adds the hwIPPoolDhcpSvrGroupIndex entry by default and sends it to the NMS. |
| 1.3.6.1.4.1.2011.6.8.1.5.1.2 | ColumnhwIPPoolDhcpSvrGroupName | read-create | current | Name of the DHCP server group. |
| 1.3.6.1.4.1.2011.6.8.1.5.1.3 | ColumnhwIPDhcpSvrPriAddr | read-write | current | Primary IP address of the DHCP server group. |
| 1.3.6.1.4.1.2011.6.8.1.5.1.4 | ColumnhwIPDhcpSvrScdiAddr | read-write | current | Secondary IP address of the DHCP server group. |
| 1.3.6.1.4.1.2011.6.8.1.5.1.5 | ColumnhwIPDhcpSvrPriState | read-only | current | Status of the primary DHCP server. |
| 1.3.6.1.4.1.2011.6.8.1.5.1.6 | ColumnhwIPDhcpScdPriState | read-only | current | Status of the secondary DHCP server. |
| 1.3.6.1.4.1.2011.6.8.1.5.1.7 | ColumnhwIPDhcpSvrAutoRelease | read-write | current | Whether the server supports the Release packet. |
| 1.3.6.1.4.1.2011.6.8.1.5.1.8 | ColumnhwIPDhcpSvrRefCount | read-only | current | Number of times the server group is referenced. |
| 1.3.6.1.4.1.2011.6.8.1.5.1.9 | ColumnhwIPDhcpSvrRowStatus | read-create | current | DHCP server rowstatus. |
| 1.3.6.1.4.1.2011.6.8.1.5.1.10 | ColumnhwIPDhcpSvrPriVpnInstance | read-create | current | VPN instance of the primary DHCP server. |
| 1.3.6.1.4.1.2011.6.8.1.5.1.11 | ColumnhwIPDhcpSvrScdVpnInstance | read-create | current | VPN instance of the secondary DHCP server. |
| 1.3.6.1.4.1.2011.6.8.1.6 | TablehwRemotePoolTable | not-accessible | current | Configuration table of the remote address pool. The remote address pool must be configured on the local equipment in the following cases: Users obtain IP addre… |
| 1.3.6.1.4.1.2011.6.8.1.6.1 | RowhwRemotePoolEntry | not-accessible | current | DESCRIPTION. |
| 1.3.6.1.4.1.2011.6.8.1.6.1.1 | ColumnhwRemoteIPPoolIndex | read-only | current | Index of an address pool. When you create an address pool, the equipment adds the hwRemoteIPPoolIndex x entry by default and sends it the NMS. |
| 1.3.6.1.4.1.2011.6.8.1.6.1.2 | ColumnhwRemoteIPPoolName | read-create | current | Name of an address pool. The service module ensures that the name is unique. |
| 1.3.6.1.4.1.2011.6.8.1.6.1.3 | ColumnhwRemoteIPPoolRouterIPAddr | read-write | current | IP address of the gateway. |
| 1.3.6.1.4.1.2011.6.8.1.6.1.4 | ColumnhwRemoteIPPoolRouterIPMask | read-write | current | IP address mask. |
| 1.3.6.1.4.1.2011.6.8.1.6.1.5 | ColumnhwRemoteIPPoolDhcpSvrGroupID | read-write | current | Name of the associated DHCP server group. |
| 1.3.6.1.4.1.2011.6.8.1.6.1.6 | ColumnhwRemoteIPPoolAvailableStatus | read-write | current | Whether the address pool is locked, 0: locked, 1: not locked. |
| 1.3.6.1.4.1.2011.6.8.1.6.1.7 | ColumnhwRemoteIPPoolRowStatus | read-create | current | Row status of IP pool. |
| 1.3.6.1.4.1.2011.6.8.1.6.1.8 | ColumnhwRemoteIPPoolPriDNSIPAddress | read-write | current | IP address of the active DNS server. |
| 1.3.6.1.4.1.2011.6.8.1.6.1.9 | ColumnhwRemoteIPPoolSecDNSIPAddress | read-write | current | IP address of the standby DNS server. |
| 1.3.6.1.4.1.2011.6.8.1.6.1.10 | ColumnhwRemoteIPPoolPriNBNSIPAddress | read-write | current | IP address of the active NBNS server. |
| 1.3.6.1.4.1.2011.6.8.1.6.1.11 | ColumnhwRemoteIPPoolSecNBNSIPAddress | read-write | current | IP address of the standby NBNS server. |
| 1.3.6.1.4.1.2011.6.8.1.6.1.12 | ColumnhwRemoteIPPoolVPNInstance | read-write | current | IP vpn-instance name. |
| 1.3.6.1.4.1.2011.6.8.1.6.1.13 | ColumnhwRemoteIPPoolDhcpGroupName | read-only | current | Dhcp server group name. |
| 1.3.6.1.4.1.2011.6.8.1.7 | NodehwIPPoolStatistic | |||
| 1.3.6.1.4.1.2011.6.8.1.7.1 | ScalarhwIPPoolNum | read-only | current | Number of configured addresses pools. |
| 1.3.6.1.4.1.2011.6.8.1.7.2 | ScalarhwIPIdleTotalNum | read-only | current | Number of idle addresses on the equipment. |
| 1.3.6.1.4.1.2011.6.8.1.7.3 | ScalarhwIPUsedTotalNum | read-only | current | Number of addresses in use on the equipment. |
| 1.3.6.1.4.1.2011.6.8.1.7.4 | ScalarhwIPConflictTotalNum | read-only | current | Number of conflicting addresses on the equipment. |
| 1.3.6.1.4.1.2011.6.8.1.7.5 | ScalarhwIPExcludeTotalNum | read-only | current | Number of excluded addresses on the equipment. |
| 1.3.6.1.4.1.2011.6.8.2 | NodehwIPPoolMibTrap | |||
| 1.3.6.1.4.1.2011.6.8.2.1 | NodehwIPPoolTrapOid | |||
| 1.3.6.1.4.1.2011.6.8.2.1.1 | ScalarhwUserIPAddress | accessible-for-notify | current | IP address of the user. |
| 1.3.6.1.4.1.2011.6.8.2.1.2 | ScalarhwDHCPServerAddr | accessible-for-notify | current | IP address of the DHCP server. |
| 1.3.6.1.4.1.2011.6.8.2.1.3 | ScalarhwDhcpSvrVrfName | accessible-for-notify | current | DHCP VPN instance name. |
| 1.3.6.1.4.1.2011.6.8.2.2 | NodehwIPPoolTrapsDefine | |||
| 1.3.6.1.4.1.2011.6.8.2.2.0 | NodehwIPPoolTraps | |||
| 1.3.6.1.4.1.2011.6.8.2.2.0.1 | NotificationhwUserIPConflictAlarm | current | 1 Notice/Trap name: IP address conflict error. 2 Notice/Trap generation cause: user IP address conflict. 3 Repair suggestions: Check whether to renew configuri… | |
| 1.3.6.1.4.1.2011.6.8.2.2.0.2 | NotificationhwUserIPLeaseAlarm | current | 1 Notice/Trap name: IP address lease alarm. 2 Notice/Trap generation cause: The user IP lease is over. 3 Repair suggestion: Check whether to renew configuring … | |
| 1.3.6.1.4.1.2011.6.8.2.2.0.3 | NotificationhwAllocUserIPFailAlarm | current | 1 Notice/Trap name: allocate user IP fail alarm. 2 Notice/Trap generation cause: there are no enough IP addresses for users. 3 Repair suggestion: Check whether… | |
| 1.3.6.1.4.1.2011.6.8.2.2.0.4 | NotificationhwDhcpServerDown | current | Description: The DHCP server does not respond. This alarm is generated if the network is unstable, the DHCP server is Down, or there is not any available addre… | |
| 1.3.6.1.4.1.2011.6.8.2.2.0.5 | NotificationhwLocalIPPoolDifferWithServer | current | The configuration of the IP address pool on the DHCP server is not the same as the configuration of the remote address pool on the local equipment. Solution: C… | |
| 1.3.6.1.4.1.2011.6.8.3 | NodehwIpPoolMIBConformance | |||
| 1.3.6.1.4.1.2011.6.8.3.1 | NodehwIpPoolCompliances | |||
| 1.3.6.1.4.1.2011.6.8.3.1.1 | CompliancehwIpPoolCompliance | current | The compliance statement for systems supporting this module. | |
| 1.3.6.1.4.1.2011.6.8.3.2 | NodehwIpPoolObjectGroups | |||
| 1.3.6.1.4.1.2011.6.8.3.2.1 | GrouphwIpPoolTableGroup | current | The huawei IP pool configuration group. | |
| 1.3.6.1.4.1.2011.6.8.3.2.2 | GrouphwIpSectionTableGroup | current | The huawei IP section configuration group. | |
| 1.3.6.1.4.1.2011.6.8.3.2.3 | GrouphwIpPoolExtTableGroup | current | The huawei IP pool extension configuration group. | |
| 1.3.6.1.4.1.2011.6.8.3.2.4 | GrouphwIpAddressStatusTableGroup | current | The huawei IP address status configuration group. | |
| 1.3.6.1.4.1.2011.6.8.3.2.5 | GrouphwDhcpSvrGroupTableGroup | current | The huawei DHCP service group configuration group. | |
| 1.3.6.1.4.1.2011.6.8.3.2.6 | GrouphwRemotePoolTableGroup | current | The huawei remote pool configuration group. | |
| 1.3.6.1.4.1.2011.6.8.3.2.7 | GrouphwIpPoolStatisticGroup | current | The huawei IP pool statistics group. | |
| 1.3.6.1.4.1.2011.6.8.3.2.8 | GrouphwIpPoolTrapOidGroup | current | The huawei IP pool trap OID group. | |
| 1.3.6.1.4.1.2011.6.8.3.2.9 | GrouphwIpPoolTrapsGroup | current | The huawei IP pool traps group. |