HUAWEI-ISIS-CONF-MIB
241 objects
The HUAWEI PRIVATE MIB contains objects belonging to processes of the IS-IS protocol existing on the system. It defines the model used to represent data that exists elsewhere in the system and on peripheral devices. There are no constraints on this MIB.
Imported Objects
| HUAWEI-MIB | hwDatacomm |
| IF-MIB | ifName |
| ISIS-MIB | isisAdjState isisCircIfIndex isisPduLspId isisSysInstance isisSysLevelIndex |
| SNMPv2-CONF | MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-SMI | Integer32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | RowStatus TEXTUAL-CONVENTION TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2011.5.25.24 | IdentityhwISIS | The HUAWEI PRIVATE MIB contains objects belonging to processes of the IS-IS protocol existing on the system. It defines the model used to represent data that e… | ||
| 1.3.6.1.4.1.2011.5.25.24.2 | NodehwIsisConf | |||
| 1.3.6.1.4.1.2011.5.25.24.2.1 | NodehwIsisMIBObjects | |||
| 1.3.6.1.4.1.2011.5.25.24.2.1.1 | TablehwIsisProcBaseTable | not-accessible | current | The set of commands of the Integrated IS-IS protocol existing on the system. |
| 1.3.6.1.4.1.2011.5.25.24.2.1.1.1 | RowhwIsisProcBaseEntry | not-accessible | current | Each row defines some commmands to a single process of the IS-IS protocol existing on the system. These commands belong to the IS-IS process. |
| 1.3.6.1.4.1.2011.5.25.24.2.1.1.1.1 | ColumnhwIsisProcIdIndex | not-accessible | current | The value of this object identifies the IS-IS process ID. The value ranges from 1 to 65535. |
| 1.3.6.1.4.1.2011.5.25.24.2.1.1.1.2 | ColumnhwIsisProcVpnName | read-create | current | The value of this object identifies the name of the IPv4 VPN instance bound to the IS-IS process. The value ranges from 0 to 31. |
| 1.3.6.1.4.1.2011.5.25.24.2.1.1.1.3 | ColumnhwIsisProcVpn6Name | read-create | obsolete | The value of this object identifies the name of the IPv6 VPN instance bound to the IS-IS process. The value ranges from 0 to 31. |
| 1.3.6.1.4.1.2011.5.25.24.2.1.1.1.4 | ColumnhwIsisProcAreaAuthType | read-create | current | The value of this object identifies the type of IS-IS area authentication. null (0): Area authentication is not configured. md5 (1): The password is sent after… |
| 1.3.6.1.4.1.2011.5.25.24.2.1.1.1.5 | ColumnhwIsisProcAreaAuthPasswordName | read-create | current | This object indicates the password of IS-IS area authentication. The password is a string of characters. If the IS-IS area authentication mode is simple, the p… |
| 1.3.6.1.4.1.2011.5.25.24.2.1.1.1.6 | ColumnhwIsisProcAreaAuthPacketAuthMode | read-create | current | The value of this object identifies the packet authentication mode of IS-IS area authentication: none (0): Authentication mode is not configured. authenticatea… |
| 1.3.6.1.4.1.2011.5.25.24.2.1.1.1.7 | ColumnhwIsisProcAreaAuthCode | read-create | current | The value of this object identifies the code of area authentication. none (0): The authentication code is not configured. osi (10): indicates OSI authenticatio… |
| 1.3.6.1.4.1.2011.5.25.24.2.1.1.1.8 | ColumnhwIsisProcDomainAuthType | read-create | current | The value of this object identifies the type of IS-IS router domain authentication. null (0): Domain authentication is not configured. md5 (1): The password is… |
| 1.3.6.1.4.1.2011.5.25.24.2.1.1.1.9 | ColumnhwIsisProcDomainAuthPasswordName | read-create | current | This object indicates the password of IS-IS routing domain authentication. The password is a string of characters. If the IS-IS routing domain authentication m… |
| 1.3.6.1.4.1.2011.5.25.24.2.1.1.1.10 | ColumnhwIsisProcDomainAuthPacketAuthMode | read-create | current | The value of this object identifies the packet authentication mode of IS-IS route domain authentication. none (0): Authentication mode is not configured. authe… |
| 1.3.6.1.4.1.2011.5.25.24.2.1.1.1.11 | ColumnhwIsisProcDomainAuthCode | read-create | current | The value of this object identifies the code of domain authentication. none (0): The authentication code is not configured. osi (10): indicates OSI authenticat… |
| 1.3.6.1.4.1.2011.5.25.24.2.1.1.1.12 | ColumnhwIsisProcLevel | read-create | current | The value of this object identifies the level of the IS-IS process. level1 (1): indicates level 1. level2 (2): indicates level 2. level12 (3): indicates level … |
| 1.3.6.1.4.1.2011.5.25.24.2.1.1.1.13 | ColumnhwIsisProcL1FlashFloodCount | read-create | current | The value of this object identifies the counter of level-1 LSPs on the interface. The value is an integer ranging from 0 to 15. The value 0 indicates that no c… |
| 1.3.6.1.4.1.2011.5.25.24.2.1.1.1.14 | ColumnhwIsisProcL1FlashFloodInterval | read-create | current | The value of this object identifies the intervals for level-1 LSP flooding. The value ranges from 10 to 50000, in milliseconds. The default value is 10 ms. |
| 1.3.6.1.4.1.2011.5.25.24.2.1.1.1.15 | ColumnhwIsisProcL2FlashFloodCount | read-create | current | The value of this object identifies the counter of level-2 LSPs on the interface. The value is an integer ranging from 0 to 15. The value 0 indicates that no c… |
| 1.3.6.1.4.1.2011.5.25.24.2.1.1.1.16 | ColumnhwIsisProcL2FlashFloodInterval | read-create | current | The value of this object identifies the intervals for level-2 LSP flooding. The value ranges from 10 to 50000 in milliseconds. The default value is 10ms. |
| 1.3.6.1.4.1.2011.5.25.24.2.1.1.1.17 | ColumnhwIsisProcLogPeerChange | read-create | current | Generates a log when the status of the peer changes. null (0): not configured enabledwithouttopology (1): IPv4 topology enabledwithtopology (2): IPv6 topology |
| 1.3.6.1.4.1.2011.5.25.24.2.1.1.1.18 | ColumnhwIsisProcTimerRefresh | read-create | current | The value of this object identifies the timer of LSP refreshing. The value ranges from 1 to 65534, in seconds. The default value is 900s. |
| 1.3.6.1.4.1.2011.5.25.24.2.1.1.1.19 | ColumnhwIsisProcTimerMaxAge | read-create | current | The value of this object identifies the maximum Keepalive time of the LSP. The value ranges from 2 to 65535, in seconds. The default value is 1200s. |
| 1.3.6.1.4.1.2011.5.25.24.2.1.1.1.20 | ColumnhwIsisProcL1TimerLspGenMaxInterval | read-create | current | The value of this object identifies the timer for the maximum delay of level-1 LSPs with the same LSP ID. The value ranges from 1 to 120, in seconds. By defaul… |
| 1.3.6.1.4.1.2011.5.25.24.2.1.1.1.21 | ColumnhwIsisProcL1TimerLspGenInitInterval | read-create | current | The value of this object identifies the delay timer that initially triggers a level-1 LSP. The value ranges from 0 to 60000, in milliseconds. By default, the v… |
| 1.3.6.1.4.1.2011.5.25.24.2.1.1.1.22 | ColumnhwIsisProcL1TimerLspGenIncrInterval | read-create | current | The value of this object identifies the delay timer for generating two level-1 LSPs with the same LSP ID. The value ranges from 1 to 60000, in milliseconds. By… |
| 1.3.6.1.4.1.2011.5.25.24.2.1.1.1.23 | ColumnhwIsisProcL2TimerLspGenMaxInterval | read-create | current | The value of this object identifies the timer for the maximum delay of Level-2 LSPs with the same LSP ID. The value ranges from 1 to 120, in seconds. By defaul… |
| 1.3.6.1.4.1.2011.5.25.24.2.1.1.1.24 | ColumnhwIsisProcL2TimerLspGenInitInterval | read-create | current | The value of this object identifies the delay timer that initially triggers a Level-2 LSP. The value ranges from 1 to 60000, in milliseconds. By default, the v… |
| 1.3.6.1.4.1.2011.5.25.24.2.1.1.1.25 | ColumnhwIsisProcL2TimerLspGenIncrInterval | read-create | current | The value of this object identifies the delay timer for generating two Level-2 LSPs with the same LSP ID. The value ranges from 1 to 60000, in milliseconds. By… |
| 1.3.6.1.4.1.2011.5.25.24.2.1.1.1.26 | ColumnhwIsisProcTimerSPFMaxInterval | read-create | current | The value of this object identifies the maximum intervals for SPF calculation. The value ranges from 1 to 120, in seconds. By default, the value is 5s. |
| 1.3.6.1.4.1.2011.5.25.24.2.1.1.1.27 | ColumnhwIsisProcTimerSPFInitInterval | read-create | current | The value of this object identifies the delay timer for initial SPF calculation. The value ranges from 1 to 60000, in milliseconds. By default, the interval is… |
| 1.3.6.1.4.1.2011.5.25.24.2.1.1.1.28 | ColumnhwIsisProcTimerSPFIncrInterval | read-create | current | The value of this object identifies the incremental delay timer for two SPF calculations. The value ranges from 1 to 60000, in milliseconds. By default, the in… |
| 1.3.6.1.4.1.2011.5.25.24.2.1.1.1.29 | ColumnhwIsisProcCostStyle | read-create | current | Configures the cost type of the IS-IS process: narrow (1): the narrow type narrowcompatible (2): the narrow-compatible type compatible (3): compatible type wid… |
| 1.3.6.1.4.1.2011.5.25.24.2.1.1.1.30 | ColumnhwIsisProcDynamicName | read-create | current | Configures the name of the IS-IS dynamic host. The value is a string of 1 to 64 characters. When the length is 0, the configured IS-IS dynamic host name is del… |
| 1.3.6.1.4.1.2011.5.25.24.2.1.1.1.31 | ColumnhwIsisProcGREnabled | read-create | current | Whether to enable IS-IS GR. true (1): enables IS-IS GR. false (2): does not enable IS-IS GR. By default, IS-IS GR is disabled. |
| 1.3.6.1.4.1.2011.5.25.24.2.1.1.1.32 | ColumnhwIsisProcGRInterval | read-create | current | The value of this object identifies the maximum intervals for enabling GR. The value ranges from 0 to 1800, in seconds. By default, the value is 300 seconds. T… |
| 1.3.6.1.4.1.2011.5.25.24.2.1.1.1.33 | ColumnhwIsisProcGRSuppresSAEnabled | read-create | current | This object indicates that the SA bit in the sent Hello packet is set to 1 after the GR-enabled device is started: true (1): enables this function. false (2): … |
| 1.3.6.1.4.1.2011.5.25.24.2.1.1.1.34 | ColumnhwIsisProcTEEnableLevel | read-create | current | Enables IS-IS TE. none (0): does not enable IS-IS TE. level1 (1): enables level-1 TE. level2 (2): enables level-2 TE. level12 (3): enables level-1-2 TE. By def… |
| 1.3.6.1.4.1.2011.5.25.24.2.1.1.1.35 | ColumnhwIsisProcBFDEnabled | read-create | current | Whether to enable BFD on each interface. true (1): enables BFD on each interface. false (2): does not enable BFD on each interface. By default, BFD is disabled… |
| 1.3.6.1.4.1.2011.5.25.24.2.1.1.1.36 | ColumnhwIsisProcBFDFrrBindEnabled | read-create | current | Enables BFD-FRR binding on each interface. true (1): enables BFD-FRR binding on each interface. false (2): does not enable BFD-FRR binding on each interface. B… |
| 1.3.6.1.4.1.2011.5.25.24.2.1.1.1.37 | ColumnhwIsisProcBFDMinTxInterval | read-create | current | The value of this object identifies the minimum interval for sending BFD packets. If isis binding to vpn and ipv4-family not enable, The value is zero. |
| 1.3.6.1.4.1.2011.5.25.24.2.1.1.1.38 | ColumnhwIsisProcBFDMinRecvInteval | read-create | current | The value of this object identifies the minimum interval for receiving BFD packets. If isis binding to vpn and ipv4-family not enable, The value is zero. |
| 1.3.6.1.4.1.2011.5.25.24.2.1.1.1.39 | ColumnhwIsisProcBFDMultiplier | read-create | current | The value of this object identifies the local detection multiplier. The value ranges from 1 to 255. If isis binding to vpn and ipv4-family not enable, The valu… |
| 1.3.6.1.4.1.2011.5.25.24.2.1.1.1.40 | ColumnhwIsisProcIPv6EnableTopologyType | read-create | current | This objects indicates whether the IPv6 topology is enabled for the IS-IS process: disable(0): disables the IPv6 topology of the IS-IS process. standard(1): sp… |
| 1.3.6.1.4.1.2011.5.25.24.2.1.1.1.41 | ColumnhwIsisProcRowStatus | read-create | current | This object supports settings of two values. createAndGo(4): A row is created. destroy(6): A row is deleted. |
| 1.3.6.1.4.1.2011.5.25.24.2.1.1.1.42 | ColumnhwIsisProcOptionalChecksumEnabled | read-create | current | Enables BFD-FRR binding on each interface. true (1): enables optional checksum for CSNP,PSNP and IIH PDU. false (2): disables optional checksum for CSNP,PSNP a… |
| 1.3.6.1.4.1.2011.5.25.24.2.1.1.1.43 | ColumnhwisisProcLsdbMaxLimit | read-create | current | This object is used to set the maximum limit number of IS-IS LSPs. The value range is from 0 to 500000. The default value 0 means no limit. |
| 1.3.6.1.4.1.2011.5.25.24.2.1.1.1.44 | ColumnhwIsisProcLsdbUpperThreshold | read-create | current | This object is used to set the upper threshold value of LSPs limit. The value range is from 1 to 100. The default means 80. |
| 1.3.6.1.4.1.2011.5.25.24.2.1.1.1.45 | ColumnhwIsisProcLsdbLowerThreshold | read-create | current | This object is used to set the lower threshold value of LSPs limit. The value range is from 1 to 100. The default means 70. |
| 1.3.6.1.4.1.2011.5.25.24.2.1.1.1.46 | ColumnhwIsisProcLsdbTotal | read-only | current | This object is used to get the number of IS-IS LSPs. |
| 1.3.6.1.4.1.2011.5.25.24.2.1.1.1.47 | ColumnhwIsisProcAreaAuthKeychainName | read-create | current | This object indicates the keychain name of IS-IS area authentication. The name is a string of characters. The name is a string of 0 to 47 characters. The lengt… |
| 1.3.6.1.4.1.2011.5.25.24.2.1.1.1.48 | ColumnhwIsisProcDomainAuthKeychainName | read-create | current | This object indicates the keychain name of IS-IS domain authentication. The name is a string of characters. The name is a string of 0 to 47 characters. The len… |
| 1.3.6.1.4.1.2011.5.25.24.2.1.2 | TablehwIsisNETTable | not-accessible | current | Set of network entities of process. |
| 1.3.6.1.4.1.2011.5.25.24.2.1.2.1 | RowhwIsisNETEntry | not-accessible | current | Each row means one network entity of the process. |
| 1.3.6.1.4.1.2011.5.25.24.2.1.2.1.1 | ColumnhwIsisNETIndex | not-accessible | current | The value of this object identifies the NET index. It is a string of 8 to 20 bytes. |
| 1.3.6.1.4.1.2011.5.25.24.2.1.2.1.2 | ColumnhwIsisNETStatus | read-create | current | The value of this object identifies the status of the NET table. createAndGo(4): A row is created. destroy(6): A row is deleted. |
| 1.3.6.1.4.1.2011.5.25.24.2.1.3 | TablehwIsisProcMTExtTable | not-accessible | current | Set of commands of the integrated IS-IS protocol existing on the system, which are different for IP type and MT. |
| 1.3.6.1.4.1.2011.5.25.24.2.1.3.1 | RowhwIsisProcMTExtEntry | not-accessible | current | Each row defines some commands specific to a single process of the IS-IS protocol existing on the system. These commands are different from ProcBaseTable for I… |
| 1.3.6.1.4.1.2011.5.25.24.2.1.3.1.1 | ColumnhwIsisIpTypeIndex | not-accessible | current | This object indicates the IP protocol type: ipv4(1): indicates IPv4. ipv6(2): indicates IPv6. |
| 1.3.6.1.4.1.2011.5.25.24.2.1.3.1.2 | ColumnhwIsisMTIdIndex | not-accessible | current | The value of this object identifies the MT ID. |
| 1.3.6.1.4.1.2011.5.25.24.2.1.3.1.3 | ColumnhwIsisMTName | read-create | current | This object indicates the name of the topology to be bound to an IS-IS process. The value is a string of 1 to 31 characters. |
| 1.3.6.1.4.1.2011.5.25.24.2.1.3.1.4 | ColumnhwIsisProcDefRoutAdvType | read-create | current | This object is used to set the mode in which default routes are advertised: null(0): indicates that default routes are not advertised. always(1): indicates tha… |
| 1.3.6.1.4.1.2011.5.25.24.2.1.3.1.5 | ColumnhwIsisProcDefRoutAdvPolicyName | read-create | current | This object indicates the routing policy name. The name is a string of 0 to 40 characters. |
| 1.3.6.1.4.1.2011.5.25.24.2.1.3.1.6 | ColumnhwIsisProcDefRoutAdvCost | read-create | current | This object is used to set the cost of a default route. |
| 1.3.6.1.4.1.2011.5.25.24.2.1.3.1.7 | ColumnhwIsisProcDefRoutAdvTag | read-create | current | This object is used to set the administrative tag of a default route. |
| 1.3.6.1.4.1.2011.5.25.24.2.1.3.1.8 | ColumnhwIsisProcDefRoutAdvLevel | read-create | current | This object is used to set the level of a default route: level1(1): indicates Level-1. level2(2): indicates Level-2. level12(3): indicates Level-1-2. By defaul… |
| 1.3.6.1.4.1.2011.5.25.24.2.1.3.1.9 | ColumnhwIsisProcDefRoutAdvAvoidLearnEnabled | read-create | current | This object indicates whether an IS-IS process is prevented from learning default routes or adding them to the routing table: true(1): indicates that an IS-IS … |
| 1.3.6.1.4.1.2011.5.25.24.2.1.3.1.10 | ColumnhwIsisProcL1CircuitCost | read-create | current | Global level-1 cost for all the interfaces. If the costStyle of the process is wide or widecompatible, the range of this value is from 1 to 16777215, else the … |
| 1.3.6.1.4.1.2011.5.25.24.2.1.3.1.11 | ColumnhwIsisProcL2CircuitCost | read-create | current | Global level-2 cost for all the interfaces. If the costStyle of the process is wide or widecompatible, the range of this value is from 1 to 16777215, else the … |
| 1.3.6.1.4.1.2011.5.25.24.2.1.3.1.12 | ColumnhwIsisProcPrefValue | read-create | current | This object is used to set the preference of an IS-IS route. The value ranges from 1 to 255, and the default value is 15. If isis binding to vpn and ip-family … |
| 1.3.6.1.4.1.2011.5.25.24.2.1.3.1.13 | ColumnhwIsisProcPrefPolicyName | read-create | current | This object indicates the name of the routing policy used for route filtering. The name is a string of 0 to 40 characters. Zero-length means no configuration. |
| 1.3.6.1.4.1.2011.5.25.24.2.1.3.1.14 | ColumnhwIsisProcMaxLoadBalance | read-create | current | This object is used to set the number of equal-cost routes. The range and the default value depend on license. If isis binding to vpn and ip-family not enable,… |
| 1.3.6.1.4.1.2011.5.25.24.2.1.3.1.15 | ColumnhwIsisProcL1CircuitDefaultTag | read-create | current | This object is used to set the default administrative tag of an IS-IS Level-1 route. |
| 1.3.6.1.4.1.2011.5.25.24.2.1.3.1.16 | ColumnhwIsisProcL2CircuitDefaultTag | read-create | current | This object is used to set the default administrative tag of an IS-IS Level-2 route. |
| 1.3.6.1.4.1.2011.5.25.24.2.1.3.1.17 | ColumnhwIsisProcBandWidthReference | read-create | current | This object is used to set the reference bandwidth. |
| 1.3.6.1.4.1.2011.5.25.24.2.1.3.1.18 | ColumnhwIsisProcAutoCostEnabled | read-create | current | This object indicates whether automatic interface cost calculation is enabled: true(1): indicates that automatic interface cost calculation is enabled. false(2… |
| 1.3.6.1.4.1.2011.5.25.24.2.1.3.1.19 | ColumnhwIsisProcSetOverLoad | read-create | current | This object indicates whether a device is enabled to notify its neighbors that its status is Overload: disable (0): indicates that a device is disabled from no… |
| 1.3.6.1.4.1.2011.5.25.24.2.1.3.1.20 | ColumnhwIsisProcSetOverLoadAllowRoute | read-create | current | This object indicates that the type of routes to be advertised when a device is in the Overload state: null(0): indicates that no route type is specified. exte… |
| 1.3.6.1.4.1.2011.5.25.24.2.1.3.1.21 | ColumnhwIsisProcOnStartInterval | read-create | current | The value of this object identifies the interval for waiting to clear the overload bit after the system is started. The value ranges from 5 to 86400, in second… |
| 1.3.6.1.4.1.2011.5.25.24.2.1.3.1.22 | ColumnhwIsisProcOnStartStartFromPeer | read-create | current | This object indicates the system ID of a neighbor. |
| 1.3.6.1.4.1.2011.5.25.24.2.1.3.1.23 | ColumnhwIsisProcOnStartFromPeerInterval | read-create | current | The value of this object identifies the maximum interval for waiting to clear the overload bit after the system is started and the neighbor relationship is est… |
| 1.3.6.1.4.1.2011.5.25.24.2.1.3.1.24 | ColumnhwIsisProcOnStartWaitForBgpEnabled | read-create | current | This object indicates whether the function of waiting for BGP convergence is enabled: true(1): indicates that the function of waiting for BGP convergence is en… |
| 1.3.6.1.4.1.2011.5.25.24.2.1.3.1.25 | ColumnhwIsisProcMTStatus | read-create | current | This object indicates the row status of this table: createAndGo(4): indicates that a row is created. destroy(6): indicates that a row is deleted. |
| 1.3.6.1.4.1.2011.5.25.24.2.1.3.1.26 | ColumnhwIsisProcL1RedistMaxLimit | read-create | current | This object is used to set the maximum limit number of IS-IS Level-1 redistribute routes advertised in LSPs. The value range is from 0 to 10000000. The default… |
| 1.3.6.1.4.1.2011.5.25.24.2.1.3.1.27 | ColumnhwIsisProcL2RedistMaxLimit | read-create | current | This object is used to set the maximum limit number of IS-IS Level-2 redistribute routes advertised in LSPs. The value range is from 0 to 10000000. The default… |
| 1.3.6.1.4.1.2011.5.25.24.2.1.3.1.28 | ColumnhwIsisProcL1UpperRedistThreshold | read-create | current | This object is used to set the upper threshold value of level-1 import limit. The value range is from 1 to 100. The default means 80. |
| 1.3.6.1.4.1.2011.5.25.24.2.1.3.1.29 | ColumnhwIsisProcL2UpperRedistThreshold | read-create | current | This object is used to set the upper threshold value of level-2 import limit. The value range is from 1 to 100. The default means 80. |
| 1.3.6.1.4.1.2011.5.25.24.2.1.3.1.30 | ColumnhwIsisProcL1LowerRedistThreshold | read-create | current | This object is used to set the lower threshold value of level-1 import limit. The value range is from 1 to 100. The default means 70. |
| 1.3.6.1.4.1.2011.5.25.24.2.1.3.1.31 | ColumnhwIsisProcL2LowerRedistThreshold | read-create | current | This object is used to set the lower threshold value of level-2 import limit. The value range is from 1 to 100 The default means 70. |
| 1.3.6.1.4.1.2011.5.25.24.2.1.3.1.32 | ColumnhwIsisProcL1TotalRedist | read-only | current | This object is used to get the number of level-1 import routes. |
| 1.3.6.1.4.1.2011.5.25.24.2.1.3.1.33 | ColumnhwIsisProcL2TotalRedist | read-only | current | This object is used to get the number of level-2 import routes. |
| 1.3.6.1.4.1.2011.5.25.24.2.1.4 | TablehwIsisPrefixPriorityTable | not-accessible | current | Set of commands of priority-based convergence. |
| 1.3.6.1.4.1.2011.5.25.24.2.1.4.1 | RowhwIsisPrefixPriorityEntry | not-accessible | current | Entry of priority-based convergence, each entry means one priority-based command for IS-IS process. |
| 1.3.6.1.4.1.2011.5.25.24.2.1.4.1.1 | ColumnhwIsisPrefixPriorityTypeIndex | not-accessible | current | This object indicates the preference of a route: medium(1): indicates medium. high(2): indicates high. critical(3): indicates critical. |
| 1.3.6.1.4.1.2011.5.25.24.2.1.4.1.2 | ColumnhwIsisPrefixPriorityL1PolicyType | read-create | current | This object indicates the type of a Level-1 route preference policy: none(0): indicates that no policy type is specified. prefix(1): indicates the IP prefix po… |
| 1.3.6.1.4.1.2011.5.25.24.2.1.4.1.3 | ColumnhwIsisPrefixPriorityL2PolicyType | read-create | current | This object indicates the type of a Level-2 route preference policy: none(0): indicates that no policy type is specified. prefix(1): indicates the IP prefix po… |
| 1.3.6.1.4.1.2011.5.25.24.2.1.4.1.4 | ColumnhwIsisPrefixPriorityL1IpPrefixName | read-create | current | This object indicates the name of a Level-1 IP prefix policy. The name is a string of 0 to 169 characters. Zero-length means no configuration. |
| 1.3.6.1.4.1.2011.5.25.24.2.1.4.1.5 | ColumnhwIsisPrefixPriorityL2IpPrefixName | read-create | current | This object indicates the name of a Level-2 IP prefix policy. The name is a string of 0 to 169 characters. Zero-length means no configuration. |
| 1.3.6.1.4.1.2011.5.25.24.2.1.4.1.6 | ColumnhwIsisPrefixPriorityL1TagValue | read-create | current | This object indicates the administrative tag of the Level-1 route preference. |
| 1.3.6.1.4.1.2011.5.25.24.2.1.4.1.7 | ColumnhwIsisPrefixPriorityL2TagValue | read-create | current | This object indicates the administrative tag of the Level-2 route preference. |
| 1.3.6.1.4.1.2011.5.25.24.2.1.5 | TablehwIsisSummaryTable | not-accessible | current | Set of IP summary addresses to use. |
| 1.3.6.1.4.1.2011.5.25.24.2.1.5.1 | RowhwIsisSummaryEntry | not-accessible | current | Each entry contains one IP summary address. |
| 1.3.6.1.4.1.2011.5.25.24.2.1.5.1.1 | ColumnhwIsisSummaryIPIndex | not-accessible | current | This object indicates the IP address of the summarized route. |
| 1.3.6.1.4.1.2011.5.25.24.2.1.5.1.2 | ColumnhwIsisSummaryMaskIndex | not-accessible | current | This object indicates the subnet mask of the summarized route. |
| 1.3.6.1.4.1.2011.5.25.24.2.1.5.1.3 | ColumnhwIsisSummaryAvoidFeedBackEnabled | read-create | current | This object indicates whether the function of avoiding learning the summarized routes through SPF calculation is enabled: true(1): indicates that the function … |
| 1.3.6.1.4.1.2011.5.25.24.2.1.5.1.4 | ColumnhwIsisSummaryGenNull0RouteEnabled | read-create | current | This object indicates whether the function of generating Null0 routes during route summarization is enabled: true(1): indicates that the function is enabled. f… |
| 1.3.6.1.4.1.2011.5.25.24.2.1.5.1.5 | ColumnhwIsisSummaryLevel | read-create | current | This object indicates the level of the summarized route: level1(1): indicates Level-1. level2(2): indicates Level-2. level12(3): indicates Level-1-2. |
| 1.3.6.1.4.1.2011.5.25.24.2.1.5.1.6 | ColumnhwIsisSummaryTag | read-create | current | This object indicates the administrative tag of the summarized route. |
| 1.3.6.1.4.1.2011.5.25.24.2.1.5.1.7 | ColumnhwIsisSummaryStatus | read-create | current | This object indicates the row status of this table: createAndGo(4): indicates that a row is created. destroy(6): indicates that a row is deleted. |
| 1.3.6.1.4.1.2011.5.25.24.2.1.6 | TablehwIsisImportRouteTable | not-accessible | current | Set of import route command. |
| 1.3.6.1.4.1.2011.5.25.24.2.1.6.1 | RowhwIsisImportRouteEntry | not-accessible | current | Entry of import route command. |
| 1.3.6.1.4.1.2011.5.25.24.2.1.6.1.1 | ColumnhwIsisImportProtocolIndex | not-accessible | current | This object indicates the routing protocol of the imported routes: direct(1): indicates direct. static(2): indicates static. rip(3): indicates RIP. ospf(4): in… |
| 1.3.6.1.4.1.2011.5.25.24.2.1.6.1.2 | ColumnhwIsisImportProcessIdIndex | not-accessible | current | Process ID of the route protocols. The range is from 1 to 65535. If the protocol is direct, static or bgp, this value can only be 1. |
| 1.3.6.1.4.1.2011.5.25.24.2.1.6.1.3 | ColumnhwIsisImportInheritCostEnabled | read-create | current | This object indicates whether the original cost of the source route is inherited: true(1): indicates that the original cost of the source route is inherited. f… |
| 1.3.6.1.4.1.2011.5.25.24.2.1.6.1.4 | ColumnhwIsisImportCost | read-create | current | Cost of the imported routes. If the costStyle of the process is wide or widecompatible, the range of this value is from 0 to 4261412864, else the range of this… |
| 1.3.6.1.4.1.2011.5.25.24.2.1.6.1.5 | ColumnhwIsisImportCostType | read-create | current | This object indicates the cost type of the imported external route. This object does not apply to IPv6. internal(1): indicates internal. external(2): indicates… |
| 1.3.6.1.4.1.2011.5.25.24.2.1.6.1.6 | ColumnhwIsisImportLevel | read-create | current | This object indicates the local IS-IS level of the imported route: level1(1): indicates Level-1. level2(2): indicates Level-2. level12(3): indicates Level-1-2. |
| 1.3.6.1.4.1.2011.5.25.24.2.1.6.1.7 | ColumnhwIsisImportTag | read-create | current | This object indicates the administrative tag assigned to an imported route. If this object is not configured, the value will be 0. |
| 1.3.6.1.4.1.2011.5.25.24.2.1.6.1.8 | ColumnhwIsisImportPolicyName | read-create | current | This object indicates the name of the routing policy used to import routes. The name is a string of 0 to 40 characters. The length 0 indicates that no name is … |
| 1.3.6.1.4.1.2011.5.25.24.2.1.6.1.9 | ColumnhwIsisImportRouteStatus | read-create | current | This object indicates the row status of this table: createAndGo(4): indicates that a row is created. destroy(6): indicates that a row is deleted. |
| 1.3.6.1.4.1.2011.5.25.24.2.1.7 | TablehwIsisRouteLeakTable | not-accessible | current | Set of route leak commands. |
| 1.3.6.1.4.1.2011.5.25.24.2.1.7.1 | RowhwIsisRouteLeakEntry | not-accessible | current | Entry of route leak commands. |
| 1.3.6.1.4.1.2011.5.25.24.2.1.7.1.1 | ColumnhwIsisRouteLeakTypeIndex | not-accessible | current | This object indicates the index of the route leaking type: level1intolevel2(1): indicates that Level-1 routes are leaked to Level-2. level2intolevel1(2): indic… |
| 1.3.6.1.4.1.2011.5.25.24.2.1.7.1.2 | ColumnhwIsisRouteLeakTag | read-create | current | This object indicates the tag of route leaking. If the tag is not configured, the reading value will be 0. |
| 1.3.6.1.4.1.2011.5.25.24.2.1.7.1.3 | ColumnhwIsisRouteLeakFilterPolicyType | read-create | current | This object indicates the type of the policy used for route leaking: none(0): indicates that no policy type is specified. basicAcl(1): indicates the number of … |
| 1.3.6.1.4.1.2011.5.25.24.2.1.7.1.4 | ColumnhwIsisRouteLeakFilterPolicyBasicAcl | read-create | current | The value of this object identifies the number of a basic ACL. The value ranges from 2000 to 2999. 0 means no configuration, The range of this value is from 20… |
| 1.3.6.1.4.1.2011.5.25.24.2.1.7.1.5 | ColumnhwIsisRouteLeakFilterPolicyPolicyName | read-create | current | The policy name of route leak. If policy type is aclName, the length of this value is from 1 to 32. If policy type is ipPrefix the length of this value is from… |
| 1.3.6.1.4.1.2011.5.25.24.2.1.7.1.6 | ColumnhwIsisRouteLeakStatus | read-create | current | This object indicates the row status of this table: createAndGo(4): indicates that a row is created. destroy(6): indicates that a row is deleted. |
| 1.3.6.1.4.1.2011.5.25.24.2.1.8 | TablehwIsisFrrTable | not-accessible | current | Set of Frr commands. |
| 1.3.6.1.4.1.2011.5.25.24.2.1.8.1 | RowhwIsisFrrEntry | not-accessible | current | Entry of frr commands for the specific MT of process. |
| 1.3.6.1.4.1.2011.5.25.24.2.1.8.1.1 | ColumnhwIsisFrrPolicyName | read-create | current | The value of this object identifies the FRR policy name. The value is a string of 1 to 40 characters. Value 0 indicates that the FRR policy is deleted. |
| 1.3.6.1.4.1.2011.5.25.24.2.1.8.1.2 | ColumnhwIsisFrrLoopFreeAltLevel | read-create | current | The value of this object identifies the level of the FRR LFA algorithm. null(0): cancels the operation of the LFA algorithm. level1(1): indicates Level-1. leve… |
| 1.3.6.1.4.1.2011.5.25.24.2.1.8.1.3 | ColumnhwIsisFrrEnabled | read-create | current | The value of this object identifies the status of FRR: enable(1): enables FRR. disable(2): disables FRR. By default, FRR is disabled. |
| 1.3.6.1.4.1.2011.5.25.24.2.1.21 | TablehwIsisIntfBaseTable | not-accessible | current | Set of commands on interface of the Integrated IS-IS protocol existing on the system. |
| 1.3.6.1.4.1.2011.5.25.24.2.1.21.1 | RowhwIsisIntfBaseEntry | not-accessible | current | Each row defines some commands to a single interface of the IS-IS protocol existing on the system. |
| 1.3.6.1.4.1.2011.5.25.24.2.1.21.1.1 | ColumnhwIsisInterfaceIndex | not-accessible | current | The value of this object identifies the interface index. |
| 1.3.6.1.4.1.2011.5.25.24.2.1.21.1.2 | ColumnhwIsisEnableIPProtocol | read-create | current | The value of this object identifies the status of IPv4 IS-IS on an interface: enable(1): enables IPv4 IS-IS. disable(2): disables IPv4 IS-IS. |
| 1.3.6.1.4.1.2011.5.25.24.2.1.21.1.3 | ColumnhwIsisEnableIPv6Protocol | read-create | current | The value of this object identifies the status of IPv6 IS-IS on an interface: enable(1): enables IPv6 IS-IS. disable(2): disables IPv6 IS-IS. |
| 1.3.6.1.4.1.2011.5.25.24.2.1.21.1.4 | ColumnhwIsisCircLevel | read-create | current | The value of this object identifies the level of an interface: level1(1): indicates Level-1. level2(2): indicates Level-2. level12(3): indicates Level-1-2. By … |
| 1.3.6.1.4.1.2011.5.25.24.2.1.21.1.5 | ColumnhwIsisCircSimulation | read-create | current | The value of this object identifies whether the broadcast interface is simulated as a P2P interface: enable(1): indicates that the broadcast interface is simul… |
| 1.3.6.1.4.1.2011.5.25.24.2.1.21.1.6 | ColumnhwIsisCircL1HelloInterval | read-create | current | The value of this object identifies the interval for sending Level-1 Hello PDUs. The value ranges from 3 to 255, in seconds. By default, the value is 10s. |
| 1.3.6.1.4.1.2011.5.25.24.2.1.21.1.7 | ColumnhwIsisCircL2HelloInterval | read-create | current | The value of this object identifies the interval for sending Level-2 Hello PDUs. The value ranges from 3 to 255, in seconds. By default, the value is 10s. |
| 1.3.6.1.4.1.2011.5.25.24.2.1.21.1.8 | ColumnhwIsisCircL1HelloMultiplier | read-create | current | The value of this object identifies the number of Level-1 Hello PDUs that fail to received from the IS-IS neighbor before the neighbor declared Down. The value… |
| 1.3.6.1.4.1.2011.5.25.24.2.1.21.1.9 | ColumnhwIsisCircL2HelloMultiplier | read-create | current | The value of this object identifies the number of Level-2 Hello PDUs that fail to received from the IS-IS neighbor before the neighbor declared Down. The value… |
| 1.3.6.1.4.1.2011.5.25.24.2.1.21.1.10 | ColumnhwIsisCircL1AuthMode | read-create | current | The value of this object identifies the mode of authenticating Level-1 Hello PDUs: null(0): indicates that area-based authentication is not configured. md5(1):… |
| 1.3.6.1.4.1.2011.5.25.24.2.1.21.1.11 | ColumnhwIsisCircL1AuthText | read-create | current | The value of this object identifies the authentication password of Level-1 Hello packets. The password is a string of characters. If the packet authentication … |
| 1.3.6.1.4.1.2011.5.25.24.2.1.21.1.12 | ColumnhwIsisCircL1AuthSendOnly | read-create | current | The value of this object identifies the mode of sending the authentication password of Level-1 Hello PDUs: true(1): indicates that the passwords in only the se… |
| 1.3.6.1.4.1.2011.5.25.24.2.1.21.1.13 | ColumnhwIsisCircL1AuthCode | read-create | current | The value of this object identifies the authentication code of Level-1 Hello PDUs: none(0): indicates that no authentication is configured. osi(10): indicates … |
| 1.3.6.1.4.1.2011.5.25.24.2.1.21.1.14 | ColumnhwIsisCircL2AuthMode | read-create | current | The value of this object identifies the mode of authenticating Level-2 Hello PDUs: null(0): indicates that area-based authentication is not configured. md5(1):… |
| 1.3.6.1.4.1.2011.5.25.24.2.1.21.1.15 | ColumnhwIsisCircL2AuthText | read-create | current | The value of this object identifies the authentication password of Level-2 Hello packets. The password is a string of characters. If the packet authentication … |
| 1.3.6.1.4.1.2011.5.25.24.2.1.21.1.16 | ColumnhwIsisCircL2AuthSendOnly | read-create | current | The value of this object identifies the mode of sending the authentication password of Level-2 Hello PDUs: true(1): indicates that the passwords in only the se… |
| 1.3.6.1.4.1.2011.5.25.24.2.1.21.1.17 | ColumnhwIsisCircL2AuthCode | read-create | current | The value of this object identifies the authentication code of Level-2 Hello PDUs: none(0): indicates that no authentication is configured. osi(10): indicates … |
| 1.3.6.1.4.1.2011.5.25.24.2.1.21.1.18 | ColumnhwIsisCircLdpSync | read-create | current | The value of this object identifies the status of synchronization of IS-IS and LDP: enable(1): enables synchronization of IS-IS and LDP. disable(2): disables s… |
| 1.3.6.1.4.1.2011.5.25.24.2.1.21.1.19 | ColumnhwIsisCircLdpSyncHoldDown | read-create | current | The value of this object identifies the timeout period of the Holddown time for synchronization of IS-IS and LDP. The value ranges from 0 to 65535, in seconds.… |
| 1.3.6.1.4.1.2011.5.25.24.2.1.21.1.20 | ColumnhwIsisCircLdpHldMaxCost | read-create | current | The value of this object identifies the timeout period of the Hold-Max-Cost time for synchronization of IS-IS and LDP. The value ranges from 0 to 65536, in sec… |
| 1.3.6.1.4.1.2011.5.25.24.2.1.21.1.21 | ColumnhwIsisCircSmallHello | read-create | current | The value of this object identifies whether IS-IS sends small Hello PDUs without the padding field: enable(1): indicates that IS-IS sends small Hello PDUs with… |
| 1.3.6.1.4.1.2011.5.25.24.2.1.21.1.22 | ColumnhwIsisCircIpIgnore | read-create | current | The value of this object identifies whether the segment in an IP address is checked: enable(1): indicates that the segment in an IP address is not checked. dis… |
| 1.3.6.1.4.1.2011.5.25.24.2.1.21.1.23 | ColumnhwIsisCircSenseRpr | read-create | current | The value of this object identifies whether fast RPR loop detection is enabled: enable(1): enables fast RPR loop detection. disable(2): disables fast RPR loop … |
| 1.3.6.1.4.1.2011.5.25.24.2.1.21.1.24 | ColumnhwIsisCircPadHello | read-create | current | The value of this object identifies whether IS-IS sends standard Hello PDUs with the padding field: enable(1): indicates that IS-IS sends standard Hello PDUs w… |
| 1.3.6.1.4.1.2011.5.25.24.2.1.21.1.25 | ColumnhwIsisCircLspRetransInterval | read-create | current | The value of this object identifies the interval for resending LSPs. The value ranges from 1 to 300, in seconds. The default value is 5. This object applies to… |
| 1.3.6.1.4.1.2011.5.25.24.2.1.21.1.26 | ColumnhwIsisL1CsnpTimerValue | read-create | current | The value of this object identifies the interval for sending Level-1 CSNP PDUs on an interface. The value ranges from 1 to 65535, in seconds. The default value… |
| 1.3.6.1.4.1.2011.5.25.24.2.1.21.1.27 | ColumnhwIsisL2CsnpTimerValue | read-create | current | The value of this object identifies the interval for sending Level-2 CSNP PDUs on an interface. The value ranges from 1 to 65535, in seconds. The default value… |
| 1.3.6.1.4.1.2011.5.25.24.2.1.21.1.28 | ColumnhwIsisLspThrottleInterval | read-create | current | The value of this object identifies the interval for sending batch of LSPs or CSNPs on an interface. The value ranges from 1 to 10000, in milliseconds. By defa… |
| 1.3.6.1.4.1.2011.5.25.24.2.1.21.1.29 | ColumnhwIsisLspThrottleCount | read-create | current | The value of this object identifies the number of a bundle of LSPs. The value ranges from 1 to 1000. By default, it is 10. |
| 1.3.6.1.4.1.2011.5.25.24.2.1.21.1.30 | ColumnhwIsisCircL1DisPriority | read-create | current | The value of this object identifies the priority of the Level-1 DIS, which is valid only on a broadcast interface. The value ranges from 0 to 127. By default, … |
| 1.3.6.1.4.1.2011.5.25.24.2.1.21.1.31 | ColumnhwIsisCircL2DisPriority | read-create | current | The value of this object identifies the priority of the Level-2 DIS, which is valid only on a broadcast interface. The value ranges from 0 to 127. By default, … |
| 1.3.6.1.4.1.2011.5.25.24.2.1.21.1.32 | ColumnhwIsisCircSilent | read-create | current | The value of this object identifies whether the status of an IS-IS interface is set to silent. enable(1): indicates that the status of IS-IS interface is set t… |
| 1.3.6.1.4.1.2011.5.25.24.2.1.21.1.33 | ColumnhwIsisCircMeshGroup | read-create | current | The value of this object identifies the mesh-group ID. The value ranges from 0 to 4294967295. Value 0 indicates that the mesh-group ID is not set. |
| 1.3.6.1.4.1.2011.5.25.24.2.1.21.1.34 | ColumnhwIsisCircMeshBlock | read-create | current | The value of this object identifies the mesh block function. If this function is configured, the set mesh-group ID is deleted. The value of this object can be:… |
| 1.3.6.1.4.1.2011.5.25.24.2.1.21.1.35 | ColumnhwIsisCircDisName | read-create | current | The value of this object identifies the DIS name of an interface. The configuration is applicable to only a broadcast interface. The value is a string of 0 to … |
| 1.3.6.1.4.1.2011.5.25.24.2.1.21.1.36 | ColumnhwIsisCircPppNego | read-create | current | The value of this object identifies the mode of negotiating the setup of a neighbor relationship on P2P interfaces: none(0): indicates that the negotiation mod… |
| 1.3.6.1.4.1.2011.5.25.24.2.1.21.1.37 | ColumnhwIsisCircPppOsicpCheck | read-create | current | The value of this object identifies whether the OSICP check is required: enable(1): enables the OSICP check. disable(2): disables the OSICP check. By default, … |
| 1.3.6.1.4.1.2011.5.25.24.2.1.21.1.38 | ColumnhwIsisIntfRowStatus | read-create | current | The value of this object identifies the setting of two values: createAndGo(4): creates one row. destroy(6): deletes one row. |
| 1.3.6.1.4.1.2011.5.25.24.2.1.21.1.39 | ColumnhwIsisCircL1AuthKeychainName | read-create | current | The value of this object identifies the keychain name of Level-1 Hello packets. The keychain name is a string of characters. The name is a string of 0 to 47 ch… |
| 1.3.6.1.4.1.2011.5.25.24.2.1.21.1.40 | ColumnhwIsisCircL2AuthKeychainName | read-create | current | The value of this object identifies the keychain name of Level-2 Hello packets. The keychain name is a string of characters. The name is a string of 0 to 47 ch… |
| 1.3.6.1.4.1.2011.5.25.24.2.1.21.1.41 | ColumnhwIsisCircStrictSnpaCheckEnable | read-create | current | The value of this object identifies whether the snpa check of lsp and snp is required. enable(1): enables the snpa check. disable(2): disables the snpa check. … |
| 1.3.6.1.4.1.2011.5.25.24.2.1.22 | TablehwIsisIntfExtTable | not-accessible | current | Set of some specific commands on interface of the Integrated IS-IS protocol existing on the system, which are different of IP type. |
| 1.3.6.1.4.1.2011.5.25.24.2.1.22.1 | RowhwIsisIntfExtEntry | not-accessible | current | Entry of Some specific commands on interface of the Integrated IS-IS protocol existing on the system, which are different of IP type. |
| 1.3.6.1.4.1.2011.5.25.24.2.1.22.1.1 | ColumnhwIsisCircL1Cost | read-create | current | The value of this object identifies the Level-1 cost of an interface. If the cost style is wide or widecompatible, the range of this value is from 0 to 1677721… |
| 1.3.6.1.4.1.2011.5.25.24.2.1.22.1.2 | ColumnhwIsisCircL2Cost | read-create | current | The value of this object identifies the Level-2 cost of an interface. If the cost style is wide or widecompatible, the range of this value is from 0 to 1677721… |
| 1.3.6.1.4.1.2011.5.25.24.2.1.22.1.3 | ColumnhwIsisL1TagValue | read-create | current | The value of this object identifies the tag value of a Level-1 interface. The value ranges from 0 to 4294967295. By default, it is 0, which indicates that the … |
| 1.3.6.1.4.1.2011.5.25.24.2.1.22.1.4 | ColumnhwIsisL2TagValue | read-create | current | The value of this object identifies the tag value of a Level-2 interface. The value ranges from 0 to 4294967295. By default, it is 0, which indicates that the … |
| 1.3.6.1.4.1.2011.5.25.24.2.1.22.1.5 | ColumnhwIsisCircSuppReachablity | read-create | current | The value of this object identifies whether the advertisement of the interface address is suppressed: Null(0): indicates that the interface address can be adve… |
| 1.3.6.1.4.1.2011.5.25.24.2.1.22.1.6 | ColumnhwIsisCircFrrBackup | read-create | current | The value of this object identifies whether an interface is enabled to become a backup interface in Loop Free Alternate (LFA) calculation. Null(0): disables an… |
| 1.3.6.1.4.1.2011.5.25.24.2.1.22.1.7 | ColumnhwIsisCircMTRowStatus | read-create | current | This object indicates the row status of this table: createAndGo(4): indicates that a row is created. destroy(6): indicates that a row is deleted. |
| 1.3.6.1.4.1.2011.5.25.24.2.1.23 | TablehwIsisIntfBfdTable | not-accessible | current | Set of BFD commands on interface of the Integrated IS-IS protocol existing on the system. |
| 1.3.6.1.4.1.2011.5.25.24.2.1.23.1 | RowhwIsisIntfBfdEntry | not-accessible | current | Entry of BFD commands on interface of the Integrated IS-IS protocol existing on the system. |
| 1.3.6.1.4.1.2011.5.25.24.2.1.23.1.1 | ColumnhwIsisCircBfdState | read-create | current | The value of this object identifies the BFD status: enable(1): enables BFD. disable(2): disables BFD. static(3): configures static BFD. block(4): blocks BFD on… |
| 1.3.6.1.4.1.2011.5.25.24.2.1.23.1.2 | ColumnhwIsisCircBfdMinTxInterval | read-create | current | The value of this object identifies the minimum interval for sending BFD packets. The value range and default value of this object are determined by the licens… |
| 1.3.6.1.4.1.2011.5.25.24.2.1.23.1.3 | ColumnhwIsisCircBfdMinRxInterval | read-create | current | The value of this object identifies the minimum interval for sending BFD packets. The value range and default value of this object are determined by the licens… |
| 1.3.6.1.4.1.2011.5.25.24.2.1.23.1.4 | ColumnhwIsisCircBfdMultiplier | read-create | current | The value of this object identifies the local BFD detection multiplier. The value range and default value of this object are determined by the license file. |
| 1.3.6.1.4.1.2011.5.25.24.2.1.23.1.5 | ColumnhwIsisCircBfdFrrBinding | read-create | current | This object indicates that the BFD status is bound to IS-IS Auto FRR. enable(1): indicates that BFD is bound to IS-IS Auto FRR. disable(2): indicates that BFD … |
| 1.3.6.1.4.1.2011.5.25.24.2.2 | NodehwIsisTrapsObjects | |||
| 1.3.6.1.4.1.2011.5.25.24.2.2.1 | ScalarhwIsisAdjChangeReason | accessible-for-notify | current | Adj down reason |
| 1.3.6.1.4.1.2011.5.25.24.2.2.2 | ScalarhwisisSysInstance | accessible-for-notify | current | The unique identifier of the Integrated IS-IS instance to which this row corresponds. This object follows the index behavior. |
| 1.3.6.1.4.1.2011.5.25.24.2.2.3 | ScalarhwisisSysLevelIndex | accessible-for-notify | current | The level that this entry describes. |
| 1.3.6.1.4.1.2011.5.25.24.2.2.4 | ScalarhwIsisOwnSysID | accessible-for-notify | current | The ID for this instance of the Integrated IS-IS protocol. This value is appended to each of the area addresses to form the Network Entity Titles. The derivati… |
| 1.3.6.1.4.1.2011.5.25.24.2.2.5 | ScalarhwIsisAdjSysID | accessible-for-notify | current | The ID for this instance of the Integrated IS-IS protocol. This value is appended to each of the area addresses to form the Network Entity Titles. The derivati… |
| 1.3.6.1.4.1.2011.5.25.24.2.2.6 | ScalarhwIsisAdjSysName | accessible-for-notify | current | Configures the name of the IS-IS dynamic host. The value is a string of 1 to 64 characters. When the length is 0, the configured IS-IS dynamic host name is del… |
| 1.3.6.1.4.1.2011.5.25.24.2.2.7 | ScalarhwIsisConflictSystemID | accessible-for-notify | current | The ID for this instance of the Integrated IS-IS protocol. This value is appended to each of the area addresses to form the Network Entity Titles. The derivati… |
| 1.3.6.1.4.1.2011.5.25.24.2.2.8 | ScalarhwIsisAutoSysId | accessible-for-notify | current | The ID for this instance of the Integrated IS-IS protocol. This value is appended to each of the area addresses to form the Network Entity Titles. The derivati… |
| 1.3.6.1.4.1.2011.5.25.24.2.2.9 | ScalarhwIsisLocalIP | accessible-for-notify | current | Local IP address. |
| 1.3.6.1.4.1.2011.5.25.24.2.2.10 | ScalarhwIsisRemoteIP | accessible-for-notify | current | IP address of the remote end. |
| 1.3.6.1.4.1.2011.5.25.24.2.2.11 | ScalarhwIsisAdjIP | accessible-for-notify | current | Neighbor IP address. |
| 1.3.6.1.4.1.2011.5.25.24.2.3 | NodehwIsisConfConformance | |||
| 1.3.6.1.4.1.2011.5.25.24.2.3.1 | NodehwIsisCompliances | |||
| 1.3.6.1.4.1.2011.5.25.24.2.3.1.1 | CompliancehwIsisModuleFullCompliance | current | The compliance statement for entities implementing the Huawei ISIS MIB | |
| 1.3.6.1.4.1.2011.5.25.24.2.3.2 | NodehwIsisConfGroups | |||
| 1.3.6.1.4.1.2011.5.25.24.2.3.2.1 | GrouphwIsisProcBaseGroup | current | The group of hwIsisProcBaseGroup. | |
| 1.3.6.1.4.1.2011.5.25.24.2.3.2.2 | GrouphwIsisProcMTExtGroup | current | The group of hwIsisProcMTExtGroup. | |
| 1.3.6.1.4.1.2011.5.25.24.2.3.2.3 | GrouphwIsisPrefixPriorityGroup | current | The group of hwIsisPrefixPriorityGroup. | |
| 1.3.6.1.4.1.2011.5.25.24.2.3.2.4 | GrouphwIsisSummaryGroup | current | The group of hwIsisSummaryGroup. | |
| 1.3.6.1.4.1.2011.5.25.24.2.3.2.5 | GrouphwIsisNETGroup | current | The group of hwIsisNETGroup. | |
| 1.3.6.1.4.1.2011.5.25.24.2.3.2.6 | GrouphwIsisImportRouteGroup | current | The group of hwIsisImportRouteGroup. | |
| 1.3.6.1.4.1.2011.5.25.24.2.3.2.7 | GrouphwIsisRouteLeakGroup | current | The group of hwIsisRouteLeakGroup. | |
| 1.3.6.1.4.1.2011.5.25.24.2.3.2.8 | GrouphwIsisFrrGroup | current | The group of hwIsisFrrGroup. | |
| 1.3.6.1.4.1.2011.5.25.24.2.3.2.21 | GrouphwIsisIntfBaseGroup | current | The group of hwIsisIntfBaseGroup. | |
| 1.3.6.1.4.1.2011.5.25.24.2.3.2.22 | GrouphwIsisIntfExtGroup | current | The group of hwIsisIntfExtGroup. | |
| 1.3.6.1.4.1.2011.5.25.24.2.3.2.23 | GrouphwIsisIntfBfdGroup | current | The group of hwIsisIntfBfdGroup. | |
| 1.3.6.1.4.1.2011.5.25.24.2.3.2.24 | GrouphwIsisTrapsObjectsGroup | current | The group of adj change reason. | |
| 1.3.6.1.4.1.2011.5.25.24.2.3.2.25 | GrouphwIsisTrapsGroup | current | The collections of notifications sent by an IS. | |
| 1.3.6.1.4.1.2011.5.25.24.2.4 | NodehwIsisTraps | |||
| 1.3.6.1.4.1.2011.5.25.24.2.4.1 | NotificationhwIsisSystemIdConflict | current | ISIS system Id conflict. | |
| 1.3.6.1.4.1.2011.5.25.24.2.4.2 | NotificationhwIsisL1ImportRouteExceedLimit | current | ISIS level-1 number of imported routes has exceeded the maximum limit. | |
| 1.3.6.1.4.1.2011.5.25.24.2.4.3 | NotificationhwIsisL1ImportRouteRestoreToLimit | current | ISIS level-1 number of imported routes is restored to less than or equal to the maximum limit. | |
| 1.3.6.1.4.1.2011.5.25.24.2.4.4 | NotificationhwIsisL2ImportRouteExceedLimit | current | ISIS level-2 number of imported routes has exceeded the maximum limit. | |
| 1.3.6.1.4.1.2011.5.25.24.2.4.5 | NotificationhwIsisL2ImportRouteRestoreToLimit | current | ISIS level-2 number of imported routes is restored to less than or equal to the maximum limit. | |
| 1.3.6.1.4.1.2011.5.25.24.2.4.6 | NotificationhwIsisL1ImportRouteThresholdReach | current | ISIS level-1 number of imported routes has reached the threshold value. | |
| 1.3.6.1.4.1.2011.5.25.24.2.4.7 | NotificationhwIsisL1ImportRouteThresholdReachClear | current | ISIS level-1 number of imported routes has been less than the threshold value. | |
| 1.3.6.1.4.1.2011.5.25.24.2.4.8 | NotificationhwIsisL2ImportRouteThresholdReach | current | ISIS level-2 number of imported routes has reached the threshold value. | |
| 1.3.6.1.4.1.2011.5.25.24.2.4.9 | NotificationhwIsisL2ImportRouteThresholdReachClear | current | ISIS level-2 number of imported routes has been less than the threshold value. | |
| 1.3.6.1.4.1.2011.5.25.24.2.4.10 | NotificationhwIsisLsdbThresholdReach | current | The number of LSP has reached the upper threshold value. | |
| 1.3.6.1.4.1.2011.5.25.24.2.4.11 | NotificationhwIsisLsdbThresholdReachClear | current | The number of LSP has been less than the lower threshold value. | |
| 1.3.6.1.4.1.2011.5.25.24.2.4.12 | NotificationhwIsisSystemIdAutoRecover | current | After a system ID conflict was detected within an IS-IS area, IS-IS changed the system ID automatically. | |
| 1.3.6.1.4.1.2011.5.25.24.2.4.13 | NotificationhwIsisAdjacencyChangeClear | current | The isisAdjacencyChange alarm was cleared. | |
| 1.3.6.1.4.1.2011.5.25.24.2.4.14 | NotificationhwIsisSeqNumExceedThreshold | current | The LSP sequence number has exceeded the upper threshold value. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| InetAddress | OCTET STRING (SIZE (0..255)) | current | Denotes a generic Internet address. An InetAddress value is always interpreted within the context of an InetAddressType value. Every usage of the InetAddress textual convention is required to specify the InetAddressType… |
| InetAddressPrefixLength | Unsigned32 (0..2040) | current | Denotes the length of a generic Internet network address prefix. A value of n corresponds to an IP address mask that has n contiguous 1-bits from the most significant bit (MSB), with all other bits set to 0. An InetAddr… |
| InetAddressType | INTEGER { unknown(0), ipv4(1), ipv6(2), ipv4z(3), ipv6z(4), dns(16) } | current | A value that represents a type of Internet address. unknown(0) An unknown address type. This value MUST be used if the value of the corresponding InetAddress object is a zero-length string. It may also be used to indica… |
| SystemID | OCTET STRING (SIZE(6)) | current | A system ID. |