HUAWEI-L2IF-MIB
137 objects
information of layer2 interface and information of hybrid port and information of trunk port
Imported Objects
| HUAWEI-MIB | hwDatacomm |
| IF-MIB | ifDescr ifIndex InterfaceIndex |
| P-BRIDGE-MIB | EnabledStatus |
| Q-BRIDGE-MIB | VlanId VlanIdOrNone |
| SNMPv2-CONF | MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-SMI | Counter64 Integer32 IpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-IDENTITY OBJECT-TYPE |
| SNMPv2-TC | RowStatus TEXTUAL-CONVENTION TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2011.5.25.42 | NodehwL2Mgmt | |||
| 1.3.6.1.4.1.2011.5.25.42.1 | IdentityhwL2IfMib | information of layer2 interface and information of hybrid port and information of trunk port | ||
| 1.3.6.1.4.1.2011.5.25.42.1.1 | NodehwL2IfObjects | |||
| 1.3.6.1.4.1.2011.5.25.42.1.1.1 | NodehwL2Interface | |||
| 1.3.6.1.4.1.2011.5.25.42.1.1.1.1 | ScalarhwL2IfPortMax | read-only | current | Max ports that this device supports,BRIDGE-MIB have a resemble definition. |
| 1.3.6.1.4.1.2011.5.25.42.1.1.1.2 | ScalarhwL2TopologyDetect | read-write | current | Whether to enable layer2 topology detection. |
| 1.3.6.1.4.1.2011.5.25.42.1.1.1.3 | TablehwL2IfTable | not-accessible | current | This table is used to query and configure the basic attributes of a Layer 2 interface, including number, index, type, default VLAN ID, and the MAC address lear… |
| 1.3.6.1.4.1.2011.5.25.42.1.1.1.3.1 | RowhwL2IfEntry | not-accessible | current | Entries of extended Huawei private interface information table |
| 1.3.6.1.4.1.2011.5.25.42.1.1.1.3.1.1 | ColumnhwL2IfPortNum | not-accessible | current | Number of layer2 interface port, a unique value, for each port.It is recommended that values are assigned contiguously starting from 1. |
| 1.3.6.1.4.1.2011.5.25.42.1.1.1.3.1.2 | ColumnhwL2IfPortIfIndex | read-only | current | The value of this object identifies the index of the Layer 2 interface. |
| 1.3.6.1.4.1.2011.5.25.42.1.1.1.3.1.3 | ColumnhwL2IfPortType | read-write | current | The value of this object identifies the type of the Layer 2 interface. |
| 1.3.6.1.4.1.2011.5.25.42.1.1.1.3.1.4 | ColumnhwL2IfPVID | read-write | current | Layer2 interface Port VLAN ID |
| 1.3.6.1.4.1.2011.5.25.42.1.1.1.3.1.5 | ColumnhwL2IfIsSrcMacFilter | read-only | current | Whether to filter source MAC address. We don't support it now. |
| 1.3.6.1.4.1.2011.5.25.42.1.1.1.3.1.6 | ColumnhwL2IfMacAddrLearnMode | read-only | current | The object indicates the mode for learning MAC addresses. |
| 1.3.6.1.4.1.2011.5.25.42.1.1.1.3.1.7 | ColumnhwL2IfMacAddressLearn | read-write | current | Status indicates if the interface is allowed to learn mac address, enable(1) can be setted, (enabled(1) means that the interface can learn mac address), otherw… |
| 1.3.6.1.4.1.2011.5.25.42.1.1.1.3.1.8 | ColumnhwL2IfBcastRatio | read-write | current | Broadcast-suppression ratio. Default is 100% . 100% indicates that the broadcast isn't suppressed. |
| 1.3.6.1.4.1.2011.5.25.42.1.1.1.3.1.9 | ColumnhwL2IfMcastRatio | read-write | current | Multicast-suppression ratio.Default is 100%, 100% indicates that the multicast isn't suppressed. |
| 1.3.6.1.4.1.2011.5.25.42.1.1.1.3.1.10 | ColumnhwL2IfUcastRatio | read-write | current | Unicastsuppression ratio. Default is 100% , 100% indicates that the broadcast isn't suppressed. |
| 1.3.6.1.4.1.2011.5.25.42.1.1.1.3.1.11 | ColumnhwL2IfOutBcastRatio | read-write | current | Outbound broadcast-suppression ratio. Default is 100% . 100% indicates that the broadcast isn't suppressed. |
| 1.3.6.1.4.1.2011.5.25.42.1.1.1.3.1.12 | ColumnhwL2IfOutMcastRatio | read-write | current | Outbound multicast-suppression ratio.Default is 100%, 100% indicates that the multicast isn't suppressed. |
| 1.3.6.1.4.1.2011.5.25.42.1.1.1.3.1.13 | ColumnhwL2IfOutUcastRatio | read-write | current | Outbound unicastsuppression ratio. Default is 100% , 100% indicates that the broadcast isn't suppressed. |
| 1.3.6.1.4.1.2011.5.25.42.1.1.1.3.1.14 | ColumnhwL2IfDiscardBcast | read-write | current | The flag of droping the broadcast packets, 1:discard; 2:forward(default). |
| 1.3.6.1.4.1.2011.5.25.42.1.1.1.3.1.15 | ColumnhwL2IfDiscardUnknownMcast | read-write | current | The flag of droping the unknown mutilcast packets, 1:discard; 2:forward(default). |
| 1.3.6.1.4.1.2011.5.25.42.1.1.1.3.1.16 | ColumnhwL2IfDiscardUnknownUcast | read-write | current | The flag of droping the unknown unicast packets, 1:discard; 2:forward(default). |
| 1.3.6.1.4.1.2011.5.25.42.1.1.1.3.1.17 | ColumnhwL2IfBpdu | read-write | current | Bpdu enable in port. |
| 1.3.6.1.4.1.2011.5.25.42.1.1.1.3.1.18 | ColumnhwL2IfPortPriority | read-write | current | Port priority about interface. |
| 1.3.6.1.4.1.2011.5.25.42.1.1.1.3.1.19 | ColumnhwL2IfPortName | read-only | current | The interface name. |
| 1.3.6.1.4.1.2011.5.25.42.1.1.1.3.1.20 | ColumnhwL2IfInInvalidVlanPkts | read-only | current | The number of invalid VLAN packets. |
| 1.3.6.1.4.1.2011.5.25.42.1.1.1.3.1.21 | ColumnhwL2IfFlushEnable | read-write | current | The flush enable status of layer2 port. |
| 1.3.6.1.4.1.2011.5.25.42.1.1.1.3.1.22 | ColumnhwL2IfFlushControlVlan | read-write | current | The control vlan of flush packet. |
| 1.3.6.1.4.1.2011.5.25.42.1.1.1.3.1.23 | ColumnhwL2IfCurrentInBcastPercent | read-write | current | The flag of qinq port trust default priority, 1:enable; 2:disable(default). |
| 1.3.6.1.4.1.2011.5.25.42.1.1.1.3.1.24 | ColumnhwL2IfCurrentOutBcastPercent | read-write | current | The flag of port offline status, 1:enable; 2:disable(default). |
| 1.3.6.1.4.1.2011.5.25.42.1.1.1.3.1.25 | ColumnhwL2IfQinqVlanTransEnable | read-write | current | Enable QinQ VLAN translation, 1:enable; 2:disable(default). |
| 1.3.6.1.4.1.2011.5.25.42.1.1.1.3.1.26 | ColumnhwL2IfQinqVlanTransMissDrop | read-write | current | Packets are dropped when a VLAN translation miss occurs, 1:noDrop(default); 2:drop. |
| 1.3.6.1.4.1.2011.5.25.42.1.1.1.3.1.27 | ColumnhwL2IfIpSubnetVlanEnable | read-write | current | Enable VLAN assignment based on ip subnet, 1:enable(default); 2:disable. |
| 1.3.6.1.4.1.2011.5.25.42.1.1.1.3.1.28 | ColumnhwL2IfMacVlanEnable | read-write | current | Mac Vlan enable, 1:enable; 2:disable(default) |
| 1.3.6.1.4.1.2011.5.25.42.1.1.1.3.1.29 | ColumnhwL2IfPolicyVlanEnable | read-write | current | Policy Vlan enable, 1:enable; 2:disable(default) |
| 1.3.6.1.4.1.2011.5.25.42.1.1.1.3.1.30 | ColumnhwL2IfVlanPrecedence | read-write | current | Determine the priorities for selecting VLAN (MAC-based, subnet-based VLANs), 0:MAC VLAN(default); 1:IPSUBNET VLAN. |
| 1.3.6.1.4.1.2011.5.25.42.1.1.1.3.1.31 | ColumnhwL2IfIsolateGroupEnable | read-write | current | The value enabled(1) indicates that the port is a member of the port-isolate group; disable(2) indicates that the port is not a member of the port-isolate grou… |
| 1.3.6.1.4.1.2011.5.25.42.1.1.1.3.1.32 | ColumnhwL2IfActivePortType | read-only | current | Layer2 interface active port type, it contains invalid(0), trunk(1), access(2), hybrid(3), fabric(4), qinq(5).Do not support fabric(4) now. |
| 1.3.6.1.4.1.2011.5.25.42.1.1.1.9 | TablehwL2IfHybridPortTable | not-accessible | current | This table describes the VLAN information about Layer 2 hybrid interfaces in tagged and untagged modes. |
| 1.3.6.1.4.1.2011.5.25.42.1.1.1.9.1 | RowhwL2IfHybridPortEntry | not-accessible | current | Entry of Hybrid-port configuration table |
| 1.3.6.1.4.1.2011.5.25.42.1.1.1.9.1.1 | ColumnhwL2IfHybridPortIndex | not-accessible | current | Index of Hybrid-port |
| 1.3.6.1.4.1.2011.5.25.42.1.1.1.9.1.2 | ColumnhwL2IfHybridTaggedVlanListLow | read-write | current | This object indicates the low-bit tagged VLANs carried in packets that can pass through the hybrid interface. There are 2048 low-bit VLANs (0-2047) and VLAN 0 … |
| 1.3.6.1.4.1.2011.5.25.42.1.1.1.9.1.3 | ColumnhwL2IfHybridTaggedVlanListHigh | read-write | current | This object indicates the high-bit tagged VLANs carried in packets that can pass through the hybrid interface. There are 2048 high-bit VLANs (2048-4095) and VL… |
| 1.3.6.1.4.1.2011.5.25.42.1.1.1.9.1.4 | ColumnhwL2IfHybridUnTaggedVlanListLow | read-write | current | This object indicates the low-bit untagged VLANs carried in packets that can pass through the hybrid interface. There are 2048 low-bit VLANs (0-2047) and VLAN … |
| 1.3.6.1.4.1.2011.5.25.42.1.1.1.9.1.5 | ColumnhwL2IfHybridUnTaggedVlanListHigh | read-write | current | This object indicates the high-bit untagged VLANs carried in packets that can pass through the hybrid interface. There are 2048 high-bit VLANs (2048-4095) and … |
| 1.3.6.1.4.1.2011.5.25.42.1.1.1.10 | TablehwL2IfTrunkPortTable | not-accessible | current | This table describes the allowed VLAN information about Layer 2 trunk interfaces. |
| 1.3.6.1.4.1.2011.5.25.42.1.1.1.10.1 | RowhwL2IfTrunkPortEntry | not-accessible | current | Entry of Trunk-port configuration table |
| 1.3.6.1.4.1.2011.5.25.42.1.1.1.10.1.1 | ColumnhwL2IfTrunkPortIndex | not-accessible | current | Index of Trunk-port |
| 1.3.6.1.4.1.2011.5.25.42.1.1.1.10.1.2 | ColumnhwL2IfTrunkAllowPassVlanListLow | read-write | current | This object indicates low-bit VLANs carried in packets that can pass through the trunk interface. There are 2048 low-bit VLANs (0-2047) and VLAN 0 is not used. |
| 1.3.6.1.4.1.2011.5.25.42.1.1.1.10.1.3 | ColumnhwL2IfTrunkAllowPassVlanListHigh | read-write | current | This object indicates high-bit VLANs carried in packets that can pass through the trunk interface. There are 2048 high-bit VLANs (2048-4095) and 4095 is not us… |
| 1.3.6.1.4.1.2011.5.25.42.1.1.1.11 | TablehwL2IfPortIsolateTable | not-accessible | current | Port isolate in the same Service-instance table. The Service-instance is used to communicate among different vlans. |
| 1.3.6.1.4.1.2011.5.25.42.1.1.1.11.1 | RowhwL2IfPortIsolateEntry | not-accessible | current | Entry of port isolate configuration table. |
| 1.3.6.1.4.1.2011.5.25.42.1.1.1.11.1.1 | ColumnhwL2IfPortIsolatePortIndex | not-accessible | current | The port index of L2 interface. |
| 1.3.6.1.4.1.2011.5.25.42.1.1.1.11.1.2 | ColumnhwL2IfPortIsolateSIName | not-accessible | current | The name of Service-instance.The Service-instance(S.I.)is used to communicate among different vlans. |
| 1.3.6.1.4.1.2011.5.25.42.1.1.1.11.1.3 | ColumnhwL2IfPortIsolateRowStatus | read-create | current | The RowStatus of hwL2IfPortIsolateTable. |
| 1.3.6.1.4.1.2011.5.25.42.1.1.1.12 | TablehwL2IfSuppressionTable | not-accessible | current | Port suppression configuration table |
| 1.3.6.1.4.1.2011.5.25.42.1.1.1.12.1 | RowhwL2IfSuppressionEntry | not-accessible | current | Entry of port suppression configuration table |
| 1.3.6.1.4.1.2011.5.25.42.1.1.1.12.1.1 | ColumnhwL2IfSuppressionPortIndex | not-accessible | current | The port index of L2 interface. |
| 1.3.6.1.4.1.2011.5.25.42.1.1.1.12.1.2 | ColumnhwL2IfSuppressionType | not-accessible | current | Type of port suppression command, a unique value from 1 to 3: 1 means broadcast suppression; 2 means multicast suppression; 3 means unicast suppression. |
| 1.3.6.1.4.1.2011.5.25.42.1.1.1.12.1.3 | ColumnhwL2IfSuppressionCir | read-create | current | Committed Information Rate. Unit: kbps. |
| 1.3.6.1.4.1.2011.5.25.42.1.1.1.12.1.4 | ColumnhwL2IfSuppressionCbs | read-create | current | Committed Burst Size. Unit: byte |
| 1.3.6.1.4.1.2011.5.25.42.1.1.1.12.1.5 | ColumnhwL2IfSuppressionRowStatus | read-create | current | The RowStatus of hwL2IfSuppressionTable . |
| 1.3.6.1.4.1.2011.5.25.42.1.1.1.13 | TablehwL2IfVlanSuppressionTable | not-accessible | current | Port and Vlan suppression configuration table |
| 1.3.6.1.4.1.2011.5.25.42.1.1.1.13.1 | RowhwL2IfVlanSuppressionEntry | not-accessible | current | Entry of port and Vlan suppression configuration table |
| 1.3.6.1.4.1.2011.5.25.42.1.1.1.13.1.1 | ColumnhwL2IfVlanSuppressionPortIndex | not-accessible | current | The port index of L2 interface. |
| 1.3.6.1.4.1.2011.5.25.42.1.1.1.13.1.2 | ColumnhwL2IfVlanSuppressionStartVlan | not-accessible | current | The start vlan-id of port and vlan suppression. |
| 1.3.6.1.4.1.2011.5.25.42.1.1.1.13.1.3 | ColumnhwL2IfVlanSuppressionEndVlan | not-accessible | current | The end vlan-id of port and vlan suppression. |
| 1.3.6.1.4.1.2011.5.25.42.1.1.1.13.1.4 | ColumnhwL2IfVlanSuppressionCir | read-create | current | Committed Information Rate. Unit: kbps. |
| 1.3.6.1.4.1.2011.5.25.42.1.1.1.13.1.5 | ColumnhwL2IfVlanSuppressionCbs | read-create | current | Committed Burst Size. Unit: byte |
| 1.3.6.1.4.1.2011.5.25.42.1.1.1.13.1.6 | ColumnhwL2IfVlanSuppressionRowStatus | read-create | current | The RowStatus of hwL2IfVlanSuppressionTable . |
| 1.3.6.1.4.1.2011.5.25.42.1.1.1.14 | TablehwL2IfPortTcnTable | not-accessible | current | Port TCN in the same Service-instance table. The Service-instance is used to configure TCN. |
| 1.3.6.1.4.1.2011.5.25.42.1.1.1.14.1 | RowhwL2IfPortTcnEntry | not-accessible | current | Entry of port TCN configuration table. |
| 1.3.6.1.4.1.2011.5.25.42.1.1.1.14.1.1 | ColumnhwL2IfTcnPortIndex | not-accessible | current | The port index of L2 interface. |
| 1.3.6.1.4.1.2011.5.25.42.1.1.1.14.1.2 | ColumnhwL2IfTcnStp | read-write | current | Status indicates if the interface is allowed to notify stp TCN message , enable(1) can be setted, (enabled(1) means that the interface can notify TCN), otherwi… |
| 1.3.6.1.4.1.2011.5.25.42.1.1.1.14.1.3 | ColumnhwL2IfTcnSmartLink | read-write | current | Status indicates if the interface is allowed to notify SmartLink TCN message, enable(1) can be setted, (enabled(1) means that the interface can notify TCN), ot… |
| 1.3.6.1.4.1.2011.5.25.42.1.1.1.14.1.4 | ColumnhwL2IfTcnVlanListLow | read-write | current | The lowest possible value of the vlan list on the Tcn-port. |
| 1.3.6.1.4.1.2011.5.25.42.1.1.1.14.1.5 | ColumnhwL2IfTcnVlanListHigh | read-write | current | The highest possible value of the vlan list on the Tcn-port. |
| 1.3.6.1.4.1.2011.5.25.42.1.1.1.15 | TablehwL2IfPortLoopDetectTable | not-accessible | current | A table containing the port external loopback detection information for device. It can protect the port from external loopback. |
| 1.3.6.1.4.1.2011.5.25.42.1.1.1.15.1 | RowhwL2IfPortLoopDetectEntry | not-accessible | current | Entries of the port external loopback detection table. |
| 1.3.6.1.4.1.2011.5.25.42.1.1.1.15.1.1 | ColumnhwL2IfPortLoopDetectPort | not-accessible | current | The port number which will be configured port external loopback detection. |
| 1.3.6.1.4.1.2011.5.25.42.1.1.1.15.1.2 | ColumnhwL2IfPortLoopDetectEnabled | read-write | current | When this object is set to 'enabled(1)' Port external loopback detection is enabled on this port else disabled. |
| 1.3.6.1.4.1.2011.5.25.42.1.1.1.15.1.3 | ColumnhwL2IfPortLoopDetectInterval | read-write | current | The detect period of port external loopback detection. |
| 1.3.6.1.4.1.2011.5.25.42.1.1.1.15.1.4 | ColumnhwL2IfPortLoopDetectAction | read-write | current | The port external loopback detection protect action of this entry. |
| 1.3.6.1.4.1.2011.5.25.42.1.1.1.15.1.5 | ColumnhwL2IfPortLoopDetectStatus | read-only | current | The current status of port(block/shutdown/trap/normal). |
| 1.3.6.1.4.1.2011.5.25.42.1.1.1.15.1.6 | ColumnhwL2IfPortLoopDetectProtocol | read-write | current | The ethernet type of the detecting packet to port external loopback detection. |
| 1.3.6.1.4.1.2011.5.25.42.1.1.1.16 | TablehwL2IfPortProtocolVlanDataTable | not-accessible | current | The entry of protocol vlan by port. |
| 1.3.6.1.4.1.2011.5.25.42.1.1.1.16.1 | RowhwL2IfPortProtocolVlanDataEntry | not-accessible | current | The entry of protocol vlan by port. |
| 1.3.6.1.4.1.2011.5.25.42.1.1.1.16.1.1 | ColumnhwL2IfPortProtocolVlanDataPortIndex | not-accessible | current | The protocol vlan Index of port . |
| 1.3.6.1.4.1.2011.5.25.42.1.1.1.16.1.2 | ColumnhwL2IfPortProtocolVlanDataVlan | read-create | current | VLAN ID. |
| 1.3.6.1.4.1.2011.5.25.42.1.1.1.16.1.3 | ColumnhwL2IfPortProtocolVlanDataPri | read-create | current | VLAN PRI. |
| 1.3.6.1.4.1.2011.5.25.42.1.1.1.16.1.4 | ColumnhwL2IfPortProtocolVlanDataRowStatus | read-create | current | Operation status. |
| 1.3.6.1.4.1.2011.5.25.42.1.1.1.17 | TablehwL2IfPwSuppressionTable | not-accessible | current | Pw suppression configuration table |
| 1.3.6.1.4.1.2011.5.25.42.1.1.1.17.1 | RowhwL2IfPwSuppressionEntry | not-accessible | current | This object indicates the configuration table for PW-based unknown traffic suppression. |
| 1.3.6.1.4.1.2011.5.25.42.1.1.1.17.1.1 | ColumnhwL2IfPwSuppressionVsiName | not-accessible | current | This object indicates the name of the VSI that is configured with PW-based unknown traffic suppression. |
| 1.3.6.1.4.1.2011.5.25.42.1.1.1.17.1.2 | ColumnhwL2IfPwSuppressionPwName | not-accessible | current | This object indicates the name of the PW that is configured with PW-based unknown traffic suppression. |
| 1.3.6.1.4.1.2011.5.25.42.1.1.1.17.1.3 | ColumnhwL2IfPwSuppressionType | not-accessible | current | The value of this object identifies the type of PW-based unknown traffic suppression: 1: broadcast suppression 2: multicast suppression 3: unknown unicast supp… |
| 1.3.6.1.4.1.2011.5.25.42.1.1.1.17.1.4 | ColumnhwL2IfPwSuppressionCir | read-create | current | This object indicates the Committed Information Rate. Unit: kbit/s. |
| 1.3.6.1.4.1.2011.5.25.42.1.1.1.17.1.5 | ColumnhwL2IfPwSuppressionCbs | read-create | current | This object indicates the Committed Burst Size. Unit: byte. |
| 1.3.6.1.4.1.2011.5.25.42.1.1.1.17.1.50 | ColumnhwL2IfPwSuppressionRowStatus | read-create | current | This object indicates the RowStatus of hwPwSuppressionTable. |
| 1.3.6.1.4.1.2011.5.25.42.1.1.1.18 | ScalarhwL2IfLoopDetectInterval | read-write | current | The detect period of system external loopback detection. |
| 1.3.6.1.4.1.2011.5.25.42.1.1.1.19 | TablehwL2IfDynamicPortVlanTable | not-accessible | current | Table for dynamic relationship of port-vlan. |
| 1.3.6.1.4.1.2011.5.25.42.1.1.1.19.1 | RowhwL2IfDynamicPortVlanEntry | not-accessible | current | Entry of dynamic port-vlan relationship table. |
| 1.3.6.1.4.1.2011.5.25.42.1.1.1.19.1.1 | ColumnhwL2IfDynamicPortVlanPortIndex | not-accessible | current | Port index of switch-port. |
| 1.3.6.1.4.1.2011.5.25.42.1.1.1.19.1.2 | ColumnhwL2IfDynamicPortVlanServiceType | not-accessible | current | Service type of dynamic port-vlan relationship table. |
| 1.3.6.1.4.1.2011.5.25.42.1.1.1.19.1.3 | ColumnhwL2IfDynamicPortVlanPvid | read-only | current | The Dynamic PVID of port-vlan table. |
| 1.3.6.1.4.1.2011.5.25.42.1.1.1.19.1.4 | ColumnhwL2IfDynamicPortVlanUntaggedVlanListLow | read-only | current | The lowest possible value of the untagged vlan list of dynamic port-vlan table. |
| 1.3.6.1.4.1.2011.5.25.42.1.1.1.19.1.5 | ColumnhwL2IfDynamicPortVlanUntaggedVlanListHigh | read-only | current | The highest possible value of the untagged vlan list of Dynamic port-vlan table. |
| 1.3.6.1.4.1.2011.5.25.42.1.1.1.19.1.6 | ColumnhwL2IfDynamicPortVlanTaggedVlanListLow | read-only | current | The lowest possible value of the tagged vlan list of Dynamic port-vlan table. |
| 1.3.6.1.4.1.2011.5.25.42.1.1.1.19.1.7 | ColumnhwL2IfDynamicPortVlanTaggedVlanListHigh | read-only | current | The highest possible value of the tagged vlan list of Dynamic port-vlan table. |
| 1.3.6.1.4.1.2011.5.25.42.1.1.2 | NodehwL2IfTraps | |||
| 1.3.6.1.4.1.2011.5.25.42.1.1.2.1 | NotificationhwL2IfInvalidVlanPacketAlarm | current | Warning of receiving invalid VLAN packets in the interface. | |
| 1.3.6.1.4.1.2011.5.25.42.1.1.2.2 | NotificationhwInBcastRisingThreshold | current | Port status changed because loopback detect.(Normal/Block/Shutdown/Trap) | |
| 1.3.6.1.4.1.2011.5.25.42.1.2 | NodehwL2IfConformance | |||
| 1.3.6.1.4.1.2011.5.25.42.1.2.1 | NodehwL2IfCompliances | |||
| 1.3.6.1.4.1.2011.5.25.42.1.2.1.1 | CompliancehwL2IfCompliance | current | The compliance statement for entities implementing the Huawei layer two interface management MIB | |
| 1.3.6.1.4.1.2011.5.25.42.1.2.2 | NodehwL2IfGroups | |||
| 1.3.6.1.4.1.2011.5.25.42.1.2.2.1 | GrouphwL2IfMacAddrGroup | current | A collection of objects indicate mac address learn of the interface. | |
| 1.3.6.1.4.1.2011.5.25.42.1.2.2.2 | GrouphwL2IfBroadcastRatioGroup | current | A collection of objects indicate broadcast-suppression ratio. | |
| 1.3.6.1.4.1.2011.5.25.42.1.2.2.3 | GrouphwL2IfHybridTaggedVlanGroup | current | A collection of objects indicate lowest/highest possible value of the tagged/untagged vlan list on the Hybrid-port. | |
| 1.3.6.1.4.1.2011.5.25.42.1.2.2.4 | GrouphwL2IfTrunkAllowPassVlanListGroup | current | A collection of objects indicate lowest/highed possible value of the allowed and passed vlan list on the Trunk-port. | |
| 1.3.6.1.4.1.2011.5.25.42.1.2.2.5 | GrouphwL2IfPortGroup | current | A collection of objects indicate index of layer2 port. | |
| 1.3.6.1.4.1.2011.5.25.42.1.2.2.6 | GrouphwL2IfPVIDGroup | current | A collection of objects indicate PVID of layer2 interface. | |
| 1.3.6.1.4.1.2011.5.25.42.1.2.2.7 | GrouphwL2IfPortTypeGroup | current | A collection of objects indicate VLAN type of layer2 interface. | |
| 1.3.6.1.4.1.2011.5.25.42.1.2.2.8 | GrouphwL2IfPortMaxGroup | current | A collection of objects indicate that the device supports maxmum of port . | |
| 1.3.6.1.4.1.2011.5.25.42.1.2.2.9 | GrouphwL2IfPortExtGroup | current | A collection of objects indicate that the device supports attribute of port . | |
| 1.3.6.1.4.1.2011.5.25.42.1.2.2.10 | GrouphwL2IfPortIsolateGroup | current | A collection of objects indicate that the device supports islation of port . | |
| 1.3.6.1.4.1.2011.5.25.42.1.2.2.11 | GrouphwL2IfAlarmGroup | current | A collection of objects indicate that the device supports alarm of port . | |
| 1.3.6.1.4.1.2011.5.25.42.1.2.2.12 | GrouphwL2IfSuppressionGroup | current | A collection of objects that L2IfSuppression. | |
| 1.3.6.1.4.1.2011.5.25.42.1.2.2.13 | GrouphwL2IfVlanSuppressionGroup | current | A collection of values indicate that 'Committed infomation rate'. | |
| 1.3.6.1.4.1.2011.5.25.42.1.2.2.14 | GrouphwL2IfPortTcnGroup | current | A collection of objects indicate that the device supports islation of port . | |
| 1.3.6.1.4.1.2011.5.25.42.1.2.2.15 | GrouphwL2IfPortLoopDetectGroup | current | A collection of objects indicate that the port external loopback detection. | |
| 1.3.6.1.4.1.2011.5.25.42.1.2.2.16 | GrouphwL2IfPortProtocolVlanDataGroup | current | The entry of protocol vlan by port. | |
| 1.3.6.1.4.1.2011.5.25.42.1.2.2.17 | GrouphwL2IfPwSuppressionGroup | current | A collection of objects in L2IfPwSuppression. | |
| 1.3.6.1.4.1.2011.5.25.42.1.2.2.19 | GrouphwL2IfDynamicPortVlanTableGroup | current | A collection of objects of dynamic relationship of port-vlan. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| VlanList | OCTET STRING | current | Each octet within this value specifies a set of eight vlans, with the first octet specifying vlans 0 through 7, the second octet specifying vlans 8 through 15, etc. Within each octet, the most significant bit represents… |