HUAWEI-L3VLAN-MIB
36 objects
The HUAWEI-L3VLAN-MIB contains objects to manage level 3 vlan. Through the MIB,you can get the detail information of each vlan,such as VLANID,encapsulated type,the statistics of the received and sent packets and so on.
Imported Objects
| HUAWEI-MIB | hwDatacomm |
| IF-MIB | ifIndex InterfaceIndex |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | Counter32 Integer32 MODULE-IDENTITY OBJECT-TYPE |
| SNMPv2-TC | RowStatus |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2011.5.25.100 | IdentityhwL3Vlan | The HUAWEI-L3VLAN-MIB contains objects to manage level 3 vlan. Through the MIB,you can get the detail information of each vlan,such as VLANID,encapsulated type… | ||
| 1.3.6.1.4.1.2011.5.25.100.1 | NodehwL3VlanMIBObjects | |||
| 1.3.6.1.4.1.2011.5.25.100.1.1 | TablehwSubIfVlanTable | not-accessible | current | This table contains the information of vlans encapsulated by the sub-interfaces. |
| 1.3.6.1.4.1.2011.5.25.100.1.1.1 | RowhwSubIfVlanEntry | not-accessible | current | Provides the information of a sub-interface vlan entry. |
| 1.3.6.1.4.1.2011.5.25.100.1.1.1.1 | ColumnhwSubIfIndex | not-accessible | current | Interface index(es) of port(s) present on the device. |
| 1.3.6.1.4.1.2011.5.25.100.1.1.1.2 | ColumnhwSubIfVlanId | not-accessible | current | This object specifies the vlan id encapsulated by the sub-interface. |
| 1.3.6.1.4.1.2011.5.25.100.1.1.1.3 | ColumnhwSubIfVlanType | read-create | current | This object specifies the vlan type encapsulated by the sub-interface. |
| 1.3.6.1.4.1.2011.5.25.100.1.1.1.4 | ColumnhwSubIfVlanStatus | read-create | current | This object specifies the status of the sub-interface vlan table. |
| 1.3.6.1.4.1.2011.5.25.100.1.2 | TablehwVLANMibRoutertVlanCountTable | not-accessible | current | Per vid router statistics table includes the number of packets that each vlan is received and sent. |
| 1.3.6.1.4.1.2011.5.25.100.1.2.1 | RowhwVLANMibRoutertVlanCountEntry | not-accessible | current | Entry of vLANMibRoutertVlanCountTable |
| 1.3.6.1.4.1.2011.5.25.100.1.2.1.1 | ColumnhwVLANMibRouterPort | read-only | current | Interface index(es) of trunk port(s) present on the device. |
| 1.3.6.1.4.1.2011.5.25.100.1.2.1.2 | ColumnhwVLANMibRouterVID | read-only | current | The vlan id. |
| 1.3.6.1.4.1.2011.5.25.100.1.2.1.3 | ColumnhwVLANMibRouterVlanPacketTran | read-only | current | The number of packets transmitted to vlan |
| 1.3.6.1.4.1.2011.5.25.100.1.2.1.4 | ColumnhwVLANMibRouterVlanPacketSent | read-only | current | Number of packets sent by vlan |
| 1.3.6.1.4.1.2011.5.25.100.1.2.1.5 | ColumnhwVLANMibClearVidStatistics | read-write | current | Setting the object to clear(1) will clear the counters of a row of the hwVLANMibRoutertVlanCountTable. When a clear action had been finished, or there is no cl… |
| 1.3.6.1.4.1.2011.5.25.100.1.3 | TablehwSubIfVlanPolicyTable | not-accessible | current | This table contains the information of vlan and 8021P/DSCP/EtherType policy encapsulated by the sub-interfaces. |
| 1.3.6.1.4.1.2011.5.25.100.1.3.1 | RowhwSubIfVlanPolicyEntry | not-accessible | current | Provides the information of a sub-interface vlan policy entry. |
| 1.3.6.1.4.1.2011.5.25.100.1.3.1.1 | ColumnhwSubIfVlanPolicyIfIndex | not-accessible | current | Interface index(es) of port(s) present on the device. |
| 1.3.6.1.4.1.2011.5.25.100.1.3.1.2 | ColumnhwSubIfVlanPolicyVlanId | not-accessible | current | This object specifies the vlan id encapsulated by the sub-interface. when the vlan id is zero it means to configure the interface as the untagged sub-interface… |
| 1.3.6.1.4.1.2011.5.25.100.1.3.1.3 | ColumnhwSubIfVlanPolicyIfType | read-create | current | Indicates the sub-interface type as follows: dot1q(1): indicates vlan-type dot1q sub-interface. dot1qTerm(2): indicates dot1q termination sub-interface. stacki… |
| 1.3.6.1.4.1.2011.5.25.100.1.3.1.4 | ColumnhwSubIfVlanPolicyVlanIdEnd | read-create | current | When configure vlan as a range, hwSubIfVlanPolicyVlanId is the start vlan id and hwSubIfVlanPolicyVlanIdEnd is the end vlan id. |
| 1.3.6.1.4.1.2011.5.25.100.1.3.1.5 | ColumnhwSubIfVlanPolicyType | read-create | current | Indicates the type of vlan policy as follows: 8021p(1): indicates IEEE 802.1P encapsulation. dscp(2): indicates Differentiated Services CodePoint. eth-type(3):… |
| 1.3.6.1.4.1.2011.5.25.100.1.3.1.6 | ColumnhwSubIfVlanPolicyValue | read-create | current | Indicates the information of vlan policy as follows: Each octet within this value specifies a set of eight priorities. When the policy type is 8021p, the first… |
| 1.3.6.1.4.1.2011.5.25.100.1.3.1.7 | ColumnhwSubIfVlanPolicyGroupId | read-create | current | Group-management id. |
| 1.3.6.1.4.1.2011.5.25.100.1.3.1.51 | ColumnhwSubIfVlanPolicyRowStatus | read-create | current | This object specifies the status of the sub-interface vlan table. |
| 1.3.6.1.4.1.2011.5.25.100.1.4 | TablehwMainIfVlanTable | not-accessible | current | This table contains the information of vlans encapsulated by the main interfaces. |
| 1.3.6.1.4.1.2011.5.25.100.1.4.1 | RowhwMainIfVlanEntry | not-accessible | current | Provides the information of a main interface vlan entry. |
| 1.3.6.1.4.1.2011.5.25.100.1.4.1.1 | ColumnhwMainIfIndex | not-accessible | current | Interface index(es) of port(s) present on the device. |
| 1.3.6.1.4.1.2011.5.25.100.1.4.1.2 | ColumnhwMainIfVlanId | read-only | current | This object specifies the vlan id encapsulated by the main interface. |
| 1.3.6.1.4.1.2011.5.25.100.2 | NodehwL3VlanTraps | |||
| 1.3.6.1.4.1.2011.5.25.100.3 | NodehwL3VlanConformance | |||
| 1.3.6.1.4.1.2011.5.25.100.3.1 | NodehwL3VlanCompliances | |||
| 1.3.6.1.4.1.2011.5.25.100.3.1.1 | CompliancehwL3VlanCompliance | current | The compliance statement for systems supporting the HUAWEI-L3VLAN-MIB. | |
| 1.3.6.1.4.1.2011.5.25.100.3.2 | NodehwL3VlanGroups | |||
| 1.3.6.1.4.1.2011.5.25.100.3.2.1 | GrouphwSubIfVlanGroup | current | Standard sub-interface vlan group. | |
| 1.3.6.1.4.1.2011.5.25.100.3.2.2 | GrouphwMainIfVlanGroup | current | main interface vlan group. |