HUAWEI-LDT-MIB
51 objects
This file is an LDT-MIB. It provides such functions of globally enabling or disabling the LDT function, enabling the global alarm, clearing statistics on ports and configuring work mode and so on.
Imported Objects
| HUAWEI-MIB | hwDatacomm |
| IF-MIB | InterfaceIndex |
| P-BRIDGE-MIB | EnabledStatus |
| Q-BRIDGE-MIB | VlanId |
| SNMPv2-CONF | MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-SMI | Counter32 Integer32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-IDENTITY OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | TEXTUAL-CONVENTION TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2011.5.25.174 | IdentityhwLdtMIB | This file is an LDT-MIB. It provides such functions of globally enabling or disabling the LDT function, enabling the global alarm, clearing statistics on ports… | ||
| 1.3.6.1.4.1.2011.5.25.174.1 | NodehwLdtObjects | |||
| 1.3.6.1.4.1.2011.5.25.174.1.1 | NodehwLdtConfiguration | |||
| 1.3.6.1.4.1.2011.5.25.174.1.1.1 | ScalarhwLdtEnable | read-write | current | Globally enable or disable the LDT configuration. If the hwLdtEnable is 1, LDT is enabled. If the hwLdtEnable is 2, LDT is disabled. By default, LDT is 2(disab… |
| 1.3.6.1.4.1.2011.5.25.174.1.1.2 | ScalarhwLdtIntervalTime | read-write | current | Packet send interval time. By default, the time is 5s. |
| 1.3.6.1.4.1.2011.5.25.174.1.1.3 | ScalarhwLdtVlanListLow | read-write | current | The lowest possible value of the vlan list. |
| 1.3.6.1.4.1.2011.5.25.174.1.1.4 | ScalarhwLdtVlanListHigh | read-write | current | The highest possible value of the vlan list. |
| 1.3.6.1.4.1.2011.5.25.174.1.1.5 | TablehwLdtPortConfigTable | not-accessible | current | LDT port congfiguration table. |
| 1.3.6.1.4.1.2011.5.25.174.1.1.5.1 | RowhwLdtPortConfigEntry | not-accessible | current | Entries of the LDT port congfiguration table. |
| 1.3.6.1.4.1.2011.5.25.174.1.1.5.1.1 | ColumnhwLdtInterfaceIndex | not-accessible | current | A unique value, greater than zero, for each interface or interface sub-layer in the managed system. The value is consistent with the ifIndex in ifTable of IF-M… |
| 1.3.6.1.4.1.2011.5.25.174.1.1.5.1.2 | ColumnhwLdtInterfaceName | read-only | current | The interface name. |
| 1.3.6.1.4.1.2011.5.25.174.1.1.5.1.3 | ColumnhwLdtPortLdtEnable | read-write | current | Interface enable or disable. If the hwLdtPortLdtEnable is 1, it is enabled. If the hwLdtPortLdtEnable is 2, it is disabled. By default, it is disabled. |
| 1.3.6.1.4.1.2011.5.25.174.1.1.5.1.4 | ColumnhwLdtPortMode | read-write | current | Action of Loop detection, including trap, blocking, noLearning, shutdown and quitvlan. By default the mode is shutdown. |
| 1.3.6.1.4.1.2011.5.25.174.1.1.5.1.5 | ColumnhwLdtPortStatus | read-only | current | Port status, including normal, blocking, noLearning, shutdown, and quitvlan. By default the status is normal. |
| 1.3.6.1.4.1.2011.5.25.174.1.1.5.1.6 | ColumnhwLdtPortRecoveryTime | read-write | current | Port recovery time.By default the time is 255s. |
| 1.3.6.1.4.1.2011.5.25.174.1.1.6 | TablehwLdtPortStatusTable | not-accessible | current | LDT port status table. |
| 1.3.6.1.4.1.2011.5.25.174.1.1.6.1 | RowhwLdtPortStatusEntry | not-accessible | current | Entries of the LDT port status table. |
| 1.3.6.1.4.1.2011.5.25.174.1.1.6.1.1 | ColumnhwLdtPortVlanIDIndex | not-accessible | current | Port enabled vlanId. |
| 1.3.6.1.4.1.2011.5.25.174.1.1.6.1.2 | ColumnhwLdtPortVlanStatus | read-only | current | Port status, including normal, blocking, noLearning, shutdown and quitvlan. By default the status is normal. |
| 1.3.6.1.4.1.2011.5.25.174.1.1.7 | TablehwPortLoopDetectTable | not-accessible | current | A table containing the port external loopback detection information for device. It can protect the port from external loopback. |
| 1.3.6.1.4.1.2011.5.25.174.1.1.7.1 | RowhwPortLoopDetectEntry | not-accessible | current | Entries of the port external loopback detection table. |
| 1.3.6.1.4.1.2011.5.25.174.1.1.7.1.1 | ColumnhwPortLoopDetectIfIndex | not-accessible | current | The port number which will be configured port external loopback detection. |
| 1.3.6.1.4.1.2011.5.25.174.1.1.7.1.2 | ColumnhwLPortLoopDetectIfName | read-only | current | The interface name. |
| 1.3.6.1.4.1.2011.5.25.174.1.1.7.1.3 | ColumnhwPortLoopDetectEnabled | read-write | current | When this object is set to 'enabled(1)' Port external loopback detection is enabled on this port else disabled. |
| 1.3.6.1.4.1.2011.5.25.174.1.1.7.1.4 | ColumnhwPortLoopDetectRecoveryTime | read-write | current | The detect period of port external loopback detection, the default value is 0. |
| 1.3.6.1.4.1.2011.5.25.174.1.1.7.1.5 | ColumnhwPortLoopDetectAction | read-write | current | The port external loopback detection protect action of this entry. |
| 1.3.6.1.4.1.2011.5.25.174.1.1.7.1.6 | ColumnhwPortLoopDetectStatus | read-only | current | The current status of port(normal/blocking/shutdown/trap/noLearning/quitvlan). |
| 1.3.6.1.4.1.2011.5.25.174.1.1.7.1.7 | ColumnhwPortLoopDetectProtocol | read-write | current | The ethernet type of the detecting packet to port external loopback detection. |
| 1.3.6.1.4.1.2011.5.25.174.1.1.7.1.8 | ColumnhwPortLoopDetectVlanLow | read-write | current | The lowest value of the vlan list for detecting loop. |
| 1.3.6.1.4.1.2011.5.25.174.1.1.7.1.9 | ColumnhwPortLoopDetectVlanHigh | read-write | current | The highest value of the vlan list for detecting loop. |
| 1.3.6.1.4.1.2011.5.25.174.1.1.8 | ScalarhwLoopDetectInterval | read-write | current | The detect period of system external loopback detection, the default value is 5 second. |
| 1.3.6.1.4.1.2011.5.25.174.1.1.9 | ScalarhwLoopDetectSendingPacketInterval | read-write | current | The period of sending detecting packet, the default value is 5 second. |
| 1.3.6.1.4.1.2011.5.25.174.2 | NodehwLdtPortTrapObjects | |||
| 1.3.6.1.4.1.2011.5.25.174.2.1 | ScalarhwLdtPortLoopVlanListLow | accessible-for-notify | current | The lowest possible value of the vlan list for discovering loop. |
| 1.3.6.1.4.1.2011.5.25.174.2.2 | ScalarhwLdtPortLoopVlanListHigh | accessible-for-notify | current | The highest possible value of the vlan list for discovering loop. |
| 1.3.6.1.4.1.2011.5.25.174.2.3 | ScalarhwLdtPortRecoverVlanListLow | accessible-for-notify | current | The lowest possible value of the vlan list for discovering loop. |
| 1.3.6.1.4.1.2011.5.25.174.2.4 | ScalarhwLdtPortRecoverVlanListHigh | accessible-for-notify | current | The highest possible value of the vlan list for discovering loop. |
| 1.3.6.1.4.1.2011.5.25.174.2.5 | ScalarhwLdtPortLoopDetectVlanList | accessible-for-notify | current | The possible vlan for discovering loop. |
| 1.3.6.1.4.1.2011.5.25.174.3 | NodehwLdtTraps | |||
| 1.3.6.1.4.1.2011.5.25.174.3.1 | NotificationhwLdtPortLoop | current | Notify the NMS that the LDT detected Loop.hwLdtInterfaceName node is interface name, hwLdtPortLoopVlanlistLow node is The lowest possible value of the vlan lis… | |
| 1.3.6.1.4.1.2011.5.25.174.3.2 | NotificationhwLdtPortRecovry | current | Notify the NMS that the LDT detected resuming port.hwLdtInterfaceName node is interface index, hwLdtPortRecoverVlanlistLow node is The lowest possible value of… | |
| 1.3.6.1.4.1.2011.5.25.174.3.3 | NotificationhwLdtPortLoopDetect | current | Notify the NMS that Loopback does exist on this port, hwLdtPortLoopDetectVlanList node indicates that which VLAN exits loopback, hwPortLoopDetectStatus node is… | |
| 1.3.6.1.4.1.2011.5.25.174.3.4 | NotificationhwLdtPortLoopDetectRecovery | current | Notify the NMS that Loopback disappeared on this port. | |
| 1.3.6.1.4.1.2011.5.25.174.4 | NodehwLdtConformance | |||
| 1.3.6.1.4.1.2011.5.25.174.4.1 | NodehwLdtConformances | |||
| 1.3.6.1.4.1.2011.5.25.174.4.1.1 | CompliancehwLdtCompliance | current | The compliance statement for SNMP entities which implement the HUAWEI-LDT-MIB. | |
| 1.3.6.1.4.1.2011.5.25.174.4.2 | NodehwLdtGroups | |||
| 1.3.6.1.4.1.2011.5.25.174.4.2.1 | GrouphwLdtConfigGroup | current | The collection of objects which are used to configure the LDT implementation behavior. This group is mandatory for agents which implement the LDT. | |
| 1.3.6.1.4.1.2011.5.25.174.4.2.2 | GrouphwLdtPortConfigGroup | current | The collection of objects indicate information of port. | |
| 1.3.6.1.4.1.2011.5.25.174.4.2.3 | GrouphwLdtTrapPortGroup | current | The collection of notifications used to indicate HUAWEI-LDT-MIB data consistency and general status information. | |
| 1.3.6.1.4.1.2011.5.25.174.4.2.4 | GrouphwLdtTrapGroup | current | The collection of notifications used to indicate HUAWEI-LDT-MIB data consistency and general status information. |