HUAWEI-LI-MIB
70 objects
This module manages huawei's Lawful interception feature.
Imported Objects
| HUAWEI-MIB | hwDatacomm |
| INET-ADDRESS-MIB | InetAddress InetAddressPrefixLength InetAddressType InetPortNumber |
| SNMPv2-CONF | MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-SMI | BITS Integer32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | DateAndTime MacAddress RowStatus TEXTUAL-CONVENTION |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2011.5.25.131 | IdentityhwLiMib | This module manages huawei's Lawful interception feature. | ||
| 1.3.6.1.4.1.2011.5.25.131.1 | NodehwLiMibNotifs | |||
| 1.3.6.1.4.1.2011.5.25.131.1.1 | NotificationhwLiMibActive | current | This notification is sent when an intercepting router or switch is first capable of intercepting a packet corresponding to a configured data stream. | |
| 1.3.6.1.4.1.2011.5.25.131.1.2 | NotificationhwLiX3HeartBeatAlarm | current | This notification is sent when an LIG is lost connection to the device which intercepting packet corresponding to a configured data stream. | |
| 1.3.6.1.4.1.2011.5.25.131.1.3 | NotificationhwLiX3HeartBeatRecover | current | This notification is sent when an LIG is recover connection to the device which intercepting packet corresponding to a configured data stream. | |
| 1.3.6.1.4.1.2011.5.25.131.2 | NodehwLiMibObjects | |||
| 1.3.6.1.4.1.2011.5.25.131.2.1 | NodehwLiAgentObjects | |||
| 1.3.6.1.4.1.2011.5.25.131.2.1.1 | ScalarhwLiAgentTime | read-only | current | The time of the LI agent.Read-only. |
| 1.3.6.1.4.1.2011.5.25.131.2.1.2 | ScalarhwLiAgentEnable | read-only | current | The status of the LI agent.Read-only. |
| 1.3.6.1.4.1.2011.5.25.131.2.1.3 | ScalarhwLiAgentX2IpAddress | read-only | current | The IP address of the X2 interface in LI agent.Just can be read by server and can be set in command line. |
| 1.3.6.1.4.1.2011.5.25.131.2.1.4 | ScalarhwLiAgentX2Port | read-only | current | The Port of the X2 interface in LI agent.Just can be read by server and can be set in command line. |
| 1.3.6.1.4.1.2011.5.25.131.2.1.5 | ScalarhwLiAgentX3IpAddress | read-only | current | The IP address of the X3 interface in LI agent.Just can be read by server and can be set in command line. |
| 1.3.6.1.4.1.2011.5.25.131.2.1.6 | ScalarhwLiAgentX3Port | read-only | current | The Port of the X3 interface in LI agent.Just can be read by server and can be set in command line. |
| 1.3.6.1.4.1.2011.5.25.131.2.3 | NodehwLiGatewayGroup | |||
| 1.3.6.1.4.1.2011.5.25.131.2.3.1 | ScalarhwLiGatewayNewIndex | read-only | current | This object contains a value which may be used as an index value for a new HwLiGatewayEntry. This is to reduce the probability of errors during creation of new… |
| 1.3.6.1.4.1.2011.5.25.131.2.3.2 | TablehwLiGatewayTable | not-accessible | current | This table lists the LI Gateway Devices with which the intercepting device communicates. This table is written by the LI Gateway Device, and is always volatile… |
| 1.3.6.1.4.1.2011.5.25.131.2.3.2.1 | RowhwLiGatewayEntry | not-accessible | current | The entry describes a single session maintained with an application on a LI Gateway Device. |
| 1.3.6.1.4.1.2011.5.25.131.2.3.2.1.1 | ColumnhwLiGatewayIndex | not-accessible | current | The index of the LIG itself. |
| 1.3.6.1.4.1.2011.5.25.131.2.3.2.1.2 | ColumnhwLiGatewayAddressType | read-create | current | The type of address in LIG |
| 1.3.6.1.4.1.2011.5.25.131.2.3.2.1.3 | ColumnhwLiGatewayX2Protocol | read-create | current | The protocol used in transferring intercepted data to the Gateway Device. |
| 1.3.6.1.4.1.2011.5.25.131.2.3.2.1.4 | ColumnhwLiGatewayX2Address | read-create | current | The IP Address of the Gateway Device's network interface to which to direct IRI. |
| 1.3.6.1.4.1.2011.5.25.131.2.3.2.1.5 | ColumnhwLiGatewayX2Port | read-create | current | The port number on the Gateway Device's network interface to which to direct IRI. |
| 1.3.6.1.4.1.2011.5.25.131.2.3.2.1.6 | ColumnhwLiGatewayX3Protocol | read-create | current | The protocol used in transferring intercepted data to the Gateway Device. |
| 1.3.6.1.4.1.2011.5.25.131.2.3.2.1.7 | ColumnhwLiGatewayX3Address | read-create | current | The IP Address of the Gateway Device's network interface to which to direct CC. |
| 1.3.6.1.4.1.2011.5.25.131.2.3.2.1.8 | ColumnhwLiGatewayX3Port | read-create | current | The port number on the Gateway Device's network interface to which to direct intercepted traffic. |
| 1.3.6.1.4.1.2011.5.25.131.2.3.2.1.9 | ColumnhwLiGatewayX3HeartBeatTimer | read-create | current | The timer for sending HeartBeat to LIG,In seconds |
| 1.3.6.1.4.1.2011.5.25.131.2.3.2.1.10 | ColumnhwLiGatewayX3NoResponseNum | read-create | current | The times of heartbeats that allowed to missed from LIG |
| 1.3.6.1.4.1.2011.5.25.131.2.3.2.1.11 | ColumnhwLiGatewayX3OperateStatus | read-only | current | The operate status of X3 interface |
| 1.3.6.1.4.1.2011.5.25.131.2.3.2.1.12 | ColumnhwLiGatewayX3Dscp | read-create | current | The Differentiated Services Code Point the intercepting device applies to the IP packets encapsulating the intercepted traffic. |
| 1.3.6.1.4.1.2011.5.25.131.2.3.2.1.14 | ColumnhwLiGatewayRowStatus | read-create | current | The status of this conceptual row. This object is used to manage creation, modification and deletion of rows in this table. |
| 1.3.6.1.4.1.2011.5.25.131.2.3.2.1.15 | ColumnhwLiGatewayX3AddressType | read-create | current | The type of address in LIG |
| 1.3.6.1.4.1.2011.5.25.131.2.3.2.1.16 | ColumnhwLiGatewayX2AddressType | read-create | current | The type of address in LIG |
| 1.3.6.1.4.1.2011.5.25.131.2.3.3 | ScalarhwLiGatewayCapabilities | read-only | current | This object displays the device capabilities with respect to certain fields in Gateway Device table. This may be dependent on hardware capabilities, software c… |
| 1.3.6.1.4.1.2011.5.25.131.2.4 | NodehwLiStreamGroup | |||
| 1.3.6.1.4.1.2011.5.25.131.2.4.2 | TablehwLiStreamTable | not-accessible | current | The Intercept Stream Table lists the IPv4 and IPv6 streams to be intercepted. The same data stream must be used by one LIG. The first index indicates which LIG… |
| 1.3.6.1.4.1.2011.5.25.131.2.4.2.1 | RowhwLiStreamEntry | not-accessible | current | A stream entry indicates a single data stream to be intercepted to a Mediation Device. Many selected data streams may go to the same application interface, and… |
| 1.3.6.1.4.1.2011.5.25.131.2.4.2.1.1 | ColumnhwLiStreamIndex | not-accessible | current | The index of the stream itself. |
| 1.3.6.1.4.1.2011.5.25.131.2.4.2.1.2 | ColumnhwLiStreamLiId | read-create | current | The ID indicate a independency stream in a LIG . |
| 1.3.6.1.4.1.2011.5.25.131.2.4.2.1.3 | ColumnhwLiStreamActivationType | read-create | current | Intercepted IRI or CC or BOTH. |
| 1.3.6.1.4.1.2011.5.25.131.2.4.2.1.4 | ColumnhwLiStreamSessionId | read-create | current | The index of the stream itself.0 means no session ID will be specified |
| 1.3.6.1.4.1.2011.5.25.131.2.4.2.1.5 | ColumnhwLiStreamTargetIdType | read-create | current | Target ID type specifies the type of packets. 1 means one direction traffic is intercept, 2 means bidirectional traffic is intercept. for bidirectional interce… |
| 1.3.6.1.4.1.2011.5.25.131.2.4.2.1.7 | ColumnhwLiStreamSrcMacAddress | read-create | current | Source Mac address of the packets which will be intercepted.0000-0000-0000 means no MAC address will be specified |
| 1.3.6.1.4.1.2011.5.25.131.2.4.2.1.8 | ColumnhwLiStreamDstMacAddress | read-create | current | Destination Mac address of the packets which will be intercepted. |
| 1.3.6.1.4.1.2011.5.25.131.2.4.2.1.9 | ColumnhwLiStreamSrcIpAddress | read-create | current | The Source Address used in packet selection. This address will be of the type specified in hwLiStreamIpAddrType.0.0.0.0 means no IP address will be specified |
| 1.3.6.1.4.1.2011.5.25.131.2.4.2.1.10 | ColumnhwLiStreamSrcIpLength | read-create | current | The length of the Source Prefix. A value of 32 causes all addresses to match. This prefix length will be consistent with the type specified in hwLiStreamIpAddr… |
| 1.3.6.1.4.1.2011.5.25.131.2.4.2.1.11 | ColumnhwLiStreamDstIpAddress | read-create | current | The Destination address or prefix used in packet selection. This address will be of the type specified in hwLiStreamIpAddrType.0.0.0.0 means no IP address will… |
| 1.3.6.1.4.1.2011.5.25.131.2.4.2.1.12 | ColumnhwLiStreamDstIpLength | read-create | current | The length of the Destination Prefix. A value of 32 causes all addresses to match. This prefix length will be consistent with the type specified in hwLiStreamI… |
| 1.3.6.1.4.1.2011.5.25.131.2.4.2.1.13 | ColumnhwLiStreamProtocol | read-create | current | Protocol type of the packets which will be intercepted.0 means no Protocol type will be specified |
| 1.3.6.1.4.1.2011.5.25.131.2.4.2.1.14 | ColumnhwLiStreamSrcPort | read-create | current | The fourth layer source port.0 means no Port will be specified |
| 1.3.6.1.4.1.2011.5.25.131.2.4.2.1.15 | ColumnhwLiStreamDstPort | read-create | current | The fourth layer Destination port.0 means no Port will be specified |
| 1.3.6.1.4.1.2011.5.25.131.2.4.2.1.16 | ColumnhwLiStreamIfIndex | read-create | current | The interface switch carrying the intercepted taffic.0 means no interface will be specified |
| 1.3.6.1.4.1.2011.5.25.131.2.4.2.1.17 | ColumnhwLiStreamUserName | read-create | current | The username whose traffic will be intercepted.zero-length means no user will be specified |
| 1.3.6.1.4.1.2011.5.25.131.2.4.2.1.18 | ColumnhwLiStreamRowStatus | read-create | current | The status of this conceptual row. This object is used to manage creation, modification and deletion of rows in this table. |
| 1.3.6.1.4.1.2011.5.25.131.2.4.2.1.19 | ColumnhwLiStreamSrcIpAddressType | read-create | current | The source IP address of the interception stream |
| 1.3.6.1.4.1.2011.5.25.131.2.4.2.1.20 | ColumnhwLiStreamDstIpAddressType | read-create | current | The destination IP address of the interception stream |
| 1.3.6.1.4.1.2011.5.25.131.2.4.2.1.21 | ColumnhwLiStreamSrcVpnName | read-create | current | The source VPN instance name whose traffic will be intercepted.zero-length means no VPN will be specified |
| 1.3.6.1.4.1.2011.5.25.131.2.4.2.1.22 | ColumnhwLiStreamDstVpnName | read-create | current | The destination VPN instance name whose traffic will be intercepted. zero-length means no VPN will be specified |
| 1.3.6.1.4.1.2011.5.25.131.2.4.2.1.23 | ColumnhwLiStreamL2tpIfIndex | read-create | current | The L2TP ifindex of intercepting stream.0 means no l2tpIfindex will be specified |
| 1.3.6.1.4.1.2011.5.25.131.2.4.2.1.24 | ColumnhwLiStreamL2tpVlanId | read-create | current | The L2TP VLAN ID of intercepting stream.0 means no Vlan will be specified |
| 1.3.6.1.4.1.2011.5.25.131.2.4.2.1.25 | ColumnhwLiStreamAcctSessionId | read-create | current | The accounting session ID of intercepting stream.zero-length means no accouting session ID will be specified |
| 1.3.6.1.4.1.2011.5.25.131.3 | NodehwLiMibConform | |||
| 1.3.6.1.4.1.2011.5.25.131.3.2 | NodehwLiMibCompliances | |||
| 1.3.6.1.4.1.2011.5.25.131.3.2.1 | CompliancehwLiMibCompliance | current | Description. | |
| 1.3.6.1.4.1.2011.5.25.131.3.3 | NodehwLiMibGroups | |||
| 1.3.6.1.4.1.2011.5.25.131.3.3.1 | GrouphwLiAgentComplianceGroup | current | Description. | |
| 1.3.6.1.4.1.2011.5.25.131.3.3.2 | GrouphwLiGatewayComplianceGroup | current | Description. | |
| 1.3.6.1.4.1.2011.5.25.131.3.3.3 | GrouphwLiStreamComplianceGroup | current | Description. | |
| 1.3.6.1.4.1.2011.5.25.131.3.3.4 | GrouphwLiNotificationGroup | current | Description. | |
| 1.3.6.1.4.1.2011.5.25.131.3.3.5 | GrouphwLiGatewayCpbComplianceGroup | current | Description. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| HWLiDscp | Integer32 (0..63) | current | An integer that is in the range of the DiffServ codepoint values. |