HUAWEI-MPLSLSR-EXT-MIB
74 objects
This MIB provides management of MPLS basic configurations. It is an extension of MPLS-LSR-STD-MIB.
Imported Objects
| HUAWEI-MIB | hwDatacomm |
| IF-MIB | InterfaceIndex |
| MPLS-TC-STD-MIB | MplsLabel |
| P-BRIDGE-MIB | EnabledStatus |
| SNMPv2-CONF | MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-SMI | Integer32 IpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | DisplayString RowStatus |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2011.5.25.182 | IdentityhwMplsLsrExtMIB | This MIB provides management of MPLS basic configurations. It is an extension of MPLS-LSR-STD-MIB. | ||
| 1.3.6.1.4.1.2011.5.25.182.1 | NodehwMplsLsrExtObject | |||
| 1.3.6.1.4.1.2011.5.25.182.1.1 | ScalarhwMplsLsrId | read-write | current | This object indicates the configuration of the MPLS LSR ID. Before the MPLS capability is enabled, the MPLS LSR ID must be configured. After the MPLS capabilit… |
| 1.3.6.1.4.1.2011.5.25.182.1.2 | ScalarhwMplsCapabilityConfig | read-write | current | This object indicates the configuration or deletion of the MPLS capability. Before the MPLS capability is enabled, the MPLS LSR ID must be configured. |
| 1.3.6.1.4.1.2011.5.25.182.1.3 | ScalarhwMplsLabelAdvertise | read-write | current | This object indicates the way to configure label advertisement policy. By default, the label advertisement policy is implicitnull. Before the label advertiseme… |
| 1.3.6.1.4.1.2011.5.25.182.1.4 | ScalarhwMplsStatisticsIntervalTimer | read-write | current | This object indicates the value of the MPLS statistics timer. Range: 30-65535 Default: 0 Unit: seconds |
| 1.3.6.1.4.1.2011.5.25.182.1.5 | ScalarhwMplsBfdCapabilityConfig | read-write | current | This object indicates the configuration or deletion of the MPLS BFD capability. Before the MPLS BFD function is enabled, you must enable the MPLS capability an… |
| 1.3.6.1.4.1.2011.5.25.182.1.6 | ScalarhwMplsBfdMinTx | read-write | current | This object indicates the minimum forwarding period. If the minimum forwarding period is set as 0 seconds, it indicates that the minimum forwarding period retu… |
| 1.3.6.1.4.1.2011.5.25.182.1.7 | ScalarhwMplsBfdMinRx | read-write | current | This object indicates the minimum receiving period. If the minimum receiving period is set as 0 seconds, it indicates that the minimum receiving period returns… |
| 1.3.6.1.4.1.2011.5.25.182.1.8 | ScalarhwMplsBfdDetectMultiplier | read-write | current | This object indicates the value of the detect multiplier. If the value of the detect multiplier is set as 0, it indicates that the value returns to the default… |
| 1.3.6.1.4.1.2011.5.25.182.1.9 | ScalarhwMplsFecListName | read-write | current | This object indicates the name of the FEC LIST. The name of the FEC LIST is globally unique, with a valid length from 1 to 31 characters. If the character leng… |
| 1.3.6.1.4.1.2011.5.25.182.1.10 | ScalarhwMplsBfdTrigger | read-write | current | This object indicates the MPLS BFD triggering policy. By using this object, you can also specify the next hop and the outgoing interface. To configure the MPLS… |
| 1.3.6.1.4.1.2011.5.25.182.1.11 | ScalarhwMplsBfdTriggerNextHop | read-write | current | This object indicates the next hop when the MPLS BFD trigger policy is configured as host. The next hop and the outgoing interface can be specified at the same… |
| 1.3.6.1.4.1.2011.5.25.182.1.12 | ScalarhwMplsBfdTriggerInterface | read-write | current | This object indicates the outgoing interface when the MPLS BFD trigger policy is configured as host. The next hop and the outgoing interface can be specified a… |
| 1.3.6.1.4.1.2011.5.25.182.1.13 | ScalarhwMplsBfdTriggerFecListName | read-write | current | This object indicates the FEC list when the MPLS BFD trigger policy is configured. The valid length of the FEC list ranges from 1 to 31 characters. If the spec… |
| 1.3.6.1.4.1.2011.5.25.182.1.14 | ScalarhwLdpVirtualTunnelFEC | accessible-for-notify | current | This object indicates the LDP virtual tunnel FEC. |
| 1.3.6.1.4.1.2011.5.25.182.1.15 | ScalarhwMplsBgpBfdCapabilityConfig | read-write | current | This object indicates the configuration or deletion of the MPLS BGP BFD capability. Before the MPLS BGP BFD function is enabled, you must enable the MPLS capab… |
| 1.3.6.1.4.1.2011.5.25.182.1.16 | ScalarhwMplsBgpBfdMinTx | read-write | current | This object indicates the minimum forwarding period. If the minimum forwarding period is set as 0 seconds, it indicates that the minimum forwarding period retu… |
| 1.3.6.1.4.1.2011.5.25.182.1.17 | ScalarhwMplsBgpBfdMinRx | read-write | current | This object indicates the minimum receiving period. If the minimum receiving period is set as 0 seconds, it indicates that the minimum receiving period returns… |
| 1.3.6.1.4.1.2011.5.25.182.1.18 | ScalarhwMplsBgpBfdDetectMultiplier | read-write | current | This object indicates the value of the detect multiplier. If the value of the detect multiplier is set as 0, it indicates that the value returns to the default… |
| 1.3.6.1.4.1.2011.5.25.182.1.19 | ScalarhwMplsBgpBfdTriggerTunnel | read-write | current | This object indicates the MPLS BGP BFD triggering policy. To configure the MPLS BGP BFD triggering policy, you must enable MPLS and BFD in advance. Options: 1.… |
| 1.3.6.1.4.1.2011.5.25.182.1.20 | ScalarhwMplsBgpBfdTriggerTunnelIpprefix | read-write | current | This object indicates the IP Prefix name when the MPLS BGP BFD trigger policy is configured. The valid length of the IP prefix name ranges from 1 to 169 charac… |
| 1.3.6.1.4.1.2011.5.25.182.1.50 | TablehwMplsFecListTable | not-accessible | current | This table is used to configure or delete MPLS FEC Node. The indexes of this table are hwMplsFecNodeIpAddress, hwMplsFecNodeInterface, and hwMplsFecNodeNextHop. |
| 1.3.6.1.4.1.2011.5.25.182.1.50.1 | RowhwMplsFecListEntry | not-accessible | current | An FEC node entry of FEC list table. It can be created, or deleted. The indexes of this entry are hwMplsFecNodeIpAddress, hwMplsFecNodeInterface, and hwMplsFec… |
| 1.3.6.1.4.1.2011.5.25.182.1.50.1.2 | ColumnhwMplsFecNodeIpAddress | not-accessible | current | This object indicates the IP address of the specified FEC node. |
| 1.3.6.1.4.1.2011.5.25.182.1.50.1.3 | ColumnhwMplsFecNodeInterface | not-accessible | current | This object indicates the outgoing interface of the FEC node. You can get the correct interface index based on the ifIndex of ifTable. |
| 1.3.6.1.4.1.2011.5.25.182.1.50.1.4 | ColumnhwMplsFecNodeNextHop | not-accessible | current | This object indicates the next hop of the FEC node. |
| 1.3.6.1.4.1.2011.5.25.182.1.50.1.51 | ColumnhwMplsFecListRowStatus | read-create | current | This object indicates whether one entry of FEC list table is created or destroyed. The value of the object can be CreatAndGo or Destroy. If the value is set as… |
| 1.3.6.1.4.1.2011.5.25.182.1.51 | TablehwMplsInterfaceTable | not-accessible | current | This table is used to configure or delete the MPLS capability on the interface. The index of this table is hwMplsInterfaceIndex. |
| 1.3.6.1.4.1.2011.5.25.182.1.51.1 | RowhwMplsInterfaceEntry | not-accessible | current | An entry of the MPLS interface table, used to display and configure features on the MPLS-supporting interface. The index of this entry is hwMplsInterfaceIndex. |
| 1.3.6.1.4.1.2011.5.25.182.1.51.1.1 | ColumnhwMplsInterfaceIndex | not-accessible | current | This object indicates the interface index. You can get the correct interface index based on the ifIndex of ifTable. |
| 1.3.6.1.4.1.2011.5.25.182.1.51.1.11 | ColumnhwMplsMtu | read-create | current | This object indicates the MPLS MTU of an interface. If the value of the MPLS MTU is set as 0, it indicates that the MPLS MTU is deleted. |
| 1.3.6.1.4.1.2011.5.25.182.1.51.1.51 | ColumnhwMplsInterfaceRowStatus | read-create | current | This object indicates whether one entry is created or deleted in hwMplsInterfaceTable. The value of the object can be CreatAndGo and Destroy. When the value is… |
| 1.3.6.1.4.1.2011.5.25.182.1.52 | TablehwLdpStaticFrrInterfaceTable | not-accessible | current | This table is used to configure or delete static LDP FRR entries on the interface. The indexes of this table are hwMplsInterfaceIndex and hwLdpStaticFrrPriorit… |
| 1.3.6.1.4.1.2011.5.25.182.1.52.1 | RowhwLdpStaticFrrInterfaceEntry | not-accessible | current | This entry is used to display and configure the FRR-supporting interface. The indexes of this entry are hwMplsInterfaceIndex and hwLdpStaticFrrPriority. |
| 1.3.6.1.4.1.2011.5.25.182.1.52.1.1 | ColumnhwLdpStaticFrrPriority | not-accessible | current | This object indicates the priority of a static FRR entry. |
| 1.3.6.1.4.1.2011.5.25.182.1.52.1.11 | ColumnhwLdpStaticFrrNextHop | read-create | current | This object indicates the next hop of the static FRR. |
| 1.3.6.1.4.1.2011.5.25.182.1.52.1.12 | ColumnhwLdpStaticFrrIpPrefix | read-create | current | This object indicates the IP prefix policy. The valid prefix length ranges from 1 to 169 characters. When the length is 0, it indicates that the policy is dele… |
| 1.3.6.1.4.1.2011.5.25.182.1.52.1.51 | ColumnhwLdpStaticFrrInterfaceRowStatus | read-create | current | This object indicates whether one entry is created or deleted in hwLdpStaticFrrInterfaceTable. The value of the object can be CreatAndGo or Destroy. When the v… |
| 1.3.6.1.4.1.2011.5.25.182.1.53 | TablehwLdpVirtualTunnelTable | not-accessible | current | This table specifies LDP virtual tunnel information. The index of this table is hwLdpVirtualTunnelIndex. |
| 1.3.6.1.4.1.2011.5.25.182.1.53.1 | RowhwLdpVirtualTunnelEntry | not-accessible | current | An entry of the virtual tunnel table, used to display the features associated with the virtual tunnel. The index of this entry is hwLdpVirtualTunnelIndex. |
| 1.3.6.1.4.1.2011.5.25.182.1.53.1.1 | ColumnhwLdpVirtualTunnelIndex | not-accessible | current | This object indicates the LDP virtual tunnel index. |
| 1.3.6.1.4.1.2011.5.25.182.1.53.1.2 | ColumnhwLdpVirtualStatus | read-only | current | The status of this LDP virtual tunnel. Options: 1. up(1) -indicates that the status of this LDP virtual tunnel is Up. 2. down(2) -indicates that the status of … |
| 1.3.6.1.4.1.2011.5.25.182.1.53.1.3 | ColumnhwLdpXcIndexArray | read-only | current | This object indicates the xc index of the members of the LDP virtual tunnel. |
| 1.3.6.1.4.1.2011.5.25.182.1.53.1.4 | ColumnhwLdpOutSegmentIndexArray | read-only | current | This object indicates the outsegment index of the members of the LDP virtual tunnel. |
| 1.3.6.1.4.1.2011.5.25.182.1.54 | NodehwLdpVirtualTunnelTrap | |||
| 1.3.6.1.4.1.2011.5.25.182.1.54.1 | NotificationhwMplsLdpVirtualTunnelUp | current | A trap is sent when an LDP virtual tunnel goes Up. | |
| 1.3.6.1.4.1.2011.5.25.182.1.54.2 | NotificationhwMplsLdpVirtualTunnelDown | current | A trap is sent when an LDP virtual tunnel goes Down. | |
| 1.3.6.1.4.1.2011.5.25.182.1.55 | TablehwMplsStaticLspTable | not-accessible | current | This table is used to create or delete static LSP configurations. The index of this table is hwMplsStaticLspName. |
| 1.3.6.1.4.1.2011.5.25.182.1.55.1 | RowhwMplsStaticLspEntry | not-accessible | current | The entry is used to show or configure static LSP. The index of this entry is hwMplsStaticLspName. |
| 1.3.6.1.4.1.2011.5.25.182.1.55.1.1 | ColumnhwMplsStaticLspName | not-accessible | current | This object indicates the name of static LSP. |
| 1.3.6.1.4.1.2011.5.25.182.1.55.1.11 | ColumnhwMplsStaticLspType | read-create | current | This object is used to identify the type of static LSP. Options: 1. ingress(1) -indicates that the type of the static LSP is ingress. 2. transit(2) -indicates … |
| 1.3.6.1.4.1.2011.5.25.182.1.55.1.12 | ColumnhwMplsStaticLspInIntfIndex | read-create | current | This object indicates the incoming-interface index. |
| 1.3.6.1.4.1.2011.5.25.182.1.55.1.13 | ColumnhwMplsStaticLspInLabel | read-create | current | This object indicates the in-label. |
| 1.3.6.1.4.1.2011.5.25.182.1.55.1.14 | ColumnhwMplsStaticLspLsrId | read-create | current | This object indicates the LSR ID of ingress static LSP. |
| 1.3.6.1.4.1.2011.5.25.182.1.55.1.15 | ColumnhwMplsStaticLspTunnelID | read-create | current | This object indicates the Tunnel ID of ingress static LSP. |
| 1.3.6.1.4.1.2011.5.25.182.1.55.1.16 | ColumnhwMplsStaticLspNextHop | read-create | current | This object indicates the nexthop of static LSP. |
| 1.3.6.1.4.1.2011.5.25.182.1.55.1.17 | ColumnhwMplsStaticLspOutIntfIndex | read-create | current | This object indicates the outgoing-interface index. |
| 1.3.6.1.4.1.2011.5.25.182.1.55.1.18 | ColumnhwMplsStaticLspOutLabel | read-create | current | This object indicates the out-label. |
| 1.3.6.1.4.1.2011.5.25.182.1.55.1.19 | ColumnhwMplsStaticLspDestAddr | read-create | current | This object indicates the destination. |
| 1.3.6.1.4.1.2011.5.25.182.1.55.1.20 | ColumnhwMplsStaticLspMaskLen | read-create | current | This object indicates the mask length. |
| 1.3.6.1.4.1.2011.5.25.182.1.55.1.51 | ColumnhwMplsStaticLspRowStatus | read-create | current | This object indicates whether one entry is created or deleted in hwMplsStaticLspTable. The value of the object can be CreateAndGo or Destroy. When the value is… |
| 1.3.6.1.4.1.2011.5.25.182.2 | NodehwMplsLsrExtConformance | |||
| 1.3.6.1.4.1.2011.5.25.182.2.1 | NodehwMplsLsrExtCompliances | |||
| 1.3.6.1.4.1.2011.5.25.182.2.1.1 | CompliancehwMplsModuleCompliance | current | hwMplsModuleCompliance | |
| 1.3.6.1.4.1.2011.5.25.182.2.2 | NodehwMplsLsrExtGroup | |||
| 1.3.6.1.4.1.2011.5.25.182.2.2.1 | GrouphwMplsBasicGroup | current | Objects required for MPLS basic configuration management. | |
| 1.3.6.1.4.1.2011.5.25.182.2.2.2 | GrouphwMplsBfdGroup | current | Objects required for MPLS BFD configuration management. | |
| 1.3.6.1.4.1.2011.5.25.182.2.2.3 | GrouphwLdpStaticFrrGroup | current | Objects required for LDP static FRR configuration management. | |
| 1.3.6.1.4.1.2011.5.25.182.2.2.4 | GrouphwMplsInterfaceGroup | current | Objects required for MPLS configuration management on interface. | |
| 1.3.6.1.4.1.2011.5.25.182.2.2.5 | GrouphwMplsLdpVirtualTunnelGroup | current | Objects required for LDP virtual tunnel management. | |
| 1.3.6.1.4.1.2011.5.25.182.2.2.6 | GrouphwMplsLdpVirtualTunnelNotificationGroup | current | Notification information about LDP virtual tunnel. | |
| 1.3.6.1.4.1.2011.5.25.182.2.2.7 | GrouphwMplsStaticLspGroup | current | Objects required for static LSP configuration management. | |
| 1.3.6.1.4.1.2011.5.25.182.2.2.8 | GrouphwMplsBgpBfdGroup | current | Objects required for MPLS BGP BFD configuration management. |