HUAWEI-PERFORMANCE-MIB
22 objects
No module-level DESCRIPTION found.
Imported Objects
| HUAWEI-MIB | hwInternetProtocol |
| IF-MIB | OwnerString |
| RFC-1212 | OBJECT-TYPE |
| RFC1213-MIB | DisplayString |
| RMON-MIB | EntryStatus |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2011.1.3.4 | NodermonExtend | |||
| 1.3.6.1.4.1.2011.1.3.4.0 | IdentityrmonExtendEventsV2 | current | Definition point for pri RMON notifications. | |
| 1.3.6.1.4.1.2011.1.3.4.0.1 | NotificationpririsingAlarm | current | The SNMP trap that is generated when an alarm entry crosses its rising threshold and generates an event that is configured for sending SNMP traps. | |
| 1.3.6.1.4.1.2011.1.3.4.0.2 | NotificationprifallingAlarm | current | The SNMP trap that is generated when an alarm entry crosses its falling threshold and generates an event that is configured for sending SNMP traps. | |
| 1.3.6.1.4.1.2011.1.3.4.4 | Nodeperformance | |||
| 1.3.6.1.4.1.2011.1.3.4.4.1 | TableprialarmTable | not-accessible | mandatory | A list of alarm entries. |
| 1.3.6.1.4.1.2011.1.3.4.4.1.1 | RowprialarmEntry | not-accessible | mandatory | A list of parameters that set up a periodic checking for alarm conditions. For example, an instance of the alarmValue object might be named alarmValue.8 |
| 1.3.6.1.4.1.2011.1.3.4.4.1.1.1 | ColumnprialarmIndex | read-only | mandatory | An index that uniquely identifies an entry in the alarm table. Each such entry defines a diagnostic sample at a particular interval for an object on the device. |
| 1.3.6.1.4.1.2011.1.3.4.4.1.1.2 | ColumnprialarmInterval | read-create | mandatory | The interval in seconds over which the data is sampled and compared with the rising and falling thresholds. When setting this variable, care should be taken in… |
| 1.3.6.1.4.1.2011.1.3.4.4.1.1.3 | ColumnprialarmVariable | read-create | mandatory | The object identifier of the particular variable to be sampled. Only variables that resolve to an ASN.1 primitive type of INTEGER (INTEGER, Integer32, Counter3… |
| 1.3.6.1.4.1.2011.1.3.4.4.1.1.4 | ColumnprialarmSympol | read-create | mandatory | The string which the alarm line described. |
| 1.3.6.1.4.1.2011.1.3.4.4.1.1.5 | ColumnprialarmSampleType | read-create | mandatory | The method of sampling the selected variable and calculating the value to be compared against the thresholds. If the value of this object is absoluteValue(1), … |
| 1.3.6.1.4.1.2011.1.3.4.4.1.1.6 | ColumnprialarmValue | read-only | mandatory | The value of the statistic during the last sampling period. For example, if the sample type is deltaValue, this value will be the difference between the sample… |
| 1.3.6.1.4.1.2011.1.3.4.4.1.1.7 | ColumnprialarmStartupAlarm | read-create | mandatory | The alarm that may be sent when this entry is first set to valid. If the first sample after this entry becomes valid is greater than or equal to the risingThre… |
| 1.3.6.1.4.1.2011.1.3.4.4.1.1.8 | ColumnprialarmRisingThreshold | read-create | mandatory | A threshold for the sampled statistic. When the current sampled value is greater than or equal to this threshold, and the value at the last sampling interval w… |
| 1.3.6.1.4.1.2011.1.3.4.4.1.1.9 | ColumnprialarmFallingThreshold | read-create | mandatory | A threshold for the sampled statistic. When the current sampled value is less than or equal to this threshold, and the value at the last sampling interval was … |
| 1.3.6.1.4.1.2011.1.3.4.4.1.1.10 | ColumnprialarmRisingEventIndex | read-create | mandatory | The index of the eventEntry that is used when a rising threshold is crossed. The eventEntry identified by a particular value of this index is the same as ident… |
| 1.3.6.1.4.1.2011.1.3.4.4.1.1.11 | ColumnprialarmFallingEventIndex | read-create | mandatory | The index of the eventEntry that is used when a falling threshold is crossed. The eventEntry identified by a particular value of this index is the same as iden… |
| 1.3.6.1.4.1.2011.1.3.4.4.1.1.12 | ColumnprialarmStatCycle | read-create | mandatory | The time alarm line exists. When the value of prialarmStatType is during(2),set prialarmStatCycle to decide how long the alarm line exists. |
| 1.3.6.1.4.1.2011.1.3.4.4.1.1.13 | ColumnprialarmStatType | read-create | mandatory | It expresses alarm state type.To choose forever(1) , the alarm line will exist forever. To choose during(2) , the alarm line will be deleted after the time set… |
| 1.3.6.1.4.1.2011.1.3.4.4.1.1.14 | ColumnprialarmOwner | read-create | mandatory | The entity that configured this entry and is therefore using the resources assigned to it. |
| 1.3.6.1.4.1.2011.1.3.4.4.1.1.15 | ColumnprialarmStatus | read-create | mandatory | The status of this alarm entry. |