HUAWEI-POE-MIB
74 objects
The HUAWEI-POE-MIB contains objects to manage POE.
Imported Objects
| HUAWEI-MIB | hwDatacomm |
| IF-MIB | InterfaceIndex |
| P-BRIDGE-MIB | EnabledStatus |
| SNMPv2-CONF | NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-SMI | Integer32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2011.5.25.195 | IdentityhwPoeMIB | The HUAWEI-POE-MIB contains objects to manage POE. | ||
| 1.3.6.1.4.1.2011.5.25.195.1 | NodehwPoeGlobalObjects | |||
| 1.3.6.1.4.1.2011.5.25.195.1.1 | ScalarhwPoePower | read-only | current | This object identifies the maximum POE power of the system. |
| 1.3.6.1.4.1.2011.5.25.195.1.4 | ScalarhwPoePowerRsvPercent | read-write | current | This object identifies the reserved percent of total POE power. |
| 1.3.6.1.4.1.2011.5.25.195.1.5 | ScalarhwPoePowerUtilizationThreshold | read-write | current | This object identifies the utilization threshold of total POE power. |
| 1.3.6.1.4.1.2011.5.25.195.2 | TablehwPoeSlotTable | not-accessible | current | This object indicates the slot configuration table of POE. |
| 1.3.6.1.4.1.2011.5.25.195.2.1 | RowhwPoeSlotEntry | not-accessible | current | This object indicates the entry of the slot configuration table of POE. |
| 1.3.6.1.4.1.2011.5.25.195.2.1.1 | ColumnhwPoeSlotId | not-accessible | current | This object identifies the slot ID. |
| 1.3.6.1.4.1.2011.5.25.195.2.1.2 | ColumnhwPoeSlotMaximumPower | read-write | current | This object identifies the maximum power set by users. The value is expressed in mW. |
| 1.3.6.1.4.1.2011.5.25.195.2.1.3 | ColumnhwPoeSlotAvailablePower | read-only | current | This object idenfies the available Power. The value is expressed in mW. |
| 1.3.6.1.4.1.2011.5.25.195.2.1.4 | ColumnhwPoeSlotReferencePower | read-only | current | This object identifies the total reference power of a slot. The value is expressed in mW. |
| 1.3.6.1.4.1.2011.5.25.195.2.1.5 | ColumnhwPoeSlotConsumingPower | read-only | current | This object identifies the total consuming power of a slot. The value is expressed in mW. |
| 1.3.6.1.4.1.2011.5.25.195.2.1.6 | ColumnhwPoeSlotPeakPower | read-only | current | This object identifies the total peak power of a slot. The value is expressed in mW. |
| 1.3.6.1.4.1.2011.5.25.195.2.1.7 | ColumnhwPoeSlotLegacyDetect | read-write | current | This object indicates the compatibility detection of a non-standard device. (1:enable; 2:disable(default)) |
| 1.3.6.1.4.1.2011.5.25.195.2.1.8 | ColumnhwPoeSlotPowerManagementManner | read-write | current | This object identifies the power management manner. (1:manual, 2:auto(default)). |
| 1.3.6.1.4.1.2011.5.25.195.2.1.9 | ColumnhwPoeSlotIsPoeDevice | read-only | current | This object indicates whether the device supports PoE. |
| 1.3.6.1.4.1.2011.5.25.195.2.1.10 | ColumnhwPoeDimmId | accessible-for-notify | current | This object identifies the DIMM ID. |
| 1.3.6.1.4.1.2011.5.25.195.2.1.11 | ColumnhwPoeSlotPowerRsvPercent | read-write | current | This object identifies the reserved percent of POE power in slot. |
| 1.3.6.1.4.1.2011.5.25.195.2.1.12 | ColumnhwPoeSlotPowerUtilizationThreshold | read-write | current | This object identifies the utilization threshold of total POE power in slot. |
| 1.3.6.1.4.1.2011.5.25.195.3 | TablehwPoePortTable | not-accessible | current | This object indicates the table that contains the configuration parameters of a POE interface. One entry corresponds to a POE interface. |
| 1.3.6.1.4.1.2011.5.25.195.3.1 | RowhwPoePortEntry | not-accessible | current | This object indicates the entry of POE Port Table. |
| 1.3.6.1.4.1.2011.5.25.195.3.1.1 | ColumnhwPoePortIfIndex | not-accessible | current | This object indicates the interface index. |
| 1.3.6.1.4.1.2011.5.25.195.3.1.2 | ColumnhwPoePortName | read-only | current | This object indicates the interface name. |
| 1.3.6.1.4.1.2011.5.25.195.3.1.3 | ColumnhwPoePortEnable | read-write | current | This object indicates the enabling status of an interface. (1:enable(default); 2:disable) |
| 1.3.6.1.4.1.2011.5.25.195.3.1.4 | ColumnhwPoePortPriority | read-write | current | This object identifies the priority of an interface. (1:critical, 2:high, 3:low(default)) |
| 1.3.6.1.4.1.2011.5.25.195.3.1.5 | ColumnhwPoePortMaximumPower | read-write | current | This object identifies the maximum power of an interface.The value is expressed in mW. |
| 1.3.6.1.4.1.2011.5.25.195.3.1.6 | ColumnhwPoePortPowerOnStatus | read-only | current | This object indicates the powering status of an interface. |
| 1.3.6.1.4.1.2011.5.25.195.3.1.7 | ColumnhwPoePortPowerStatus | read-only | current | This object indicates the status of an interface. |
| 1.3.6.1.4.1.2011.5.25.195.3.1.8 | ColumnhwPoePortPdClass | read-only | current | This object identifies the class of a PD. |
| 1.3.6.1.4.1.2011.5.25.195.3.1.9 | ColumnhwPoePortReferencePower | read-only | current | This object identifies the guaranteed power of an interface. The value is expressed in mW. |
| 1.3.6.1.4.1.2011.5.25.195.3.1.10 | ColumnhwPoePortConsumingPower | read-only | current | This object identifies the consuming power of an interface. The value is expressed in mW. |
| 1.3.6.1.4.1.2011.5.25.195.3.1.11 | ColumnhwPoePortPeakPower | read-only | current | This object identifies the peak power of an interface. The value is expressed in mW. |
| 1.3.6.1.4.1.2011.5.25.195.3.1.12 | ColumnhwPoePortAveragePower | read-only | current | This object identifies the average power of an interface. The value is expressed in mW. |
| 1.3.6.1.4.1.2011.5.25.195.3.1.13 | ColumnhwPoePortCurrent | read-only | current | This object indicates the current of an interface. The value is expressed in mA. |
| 1.3.6.1.4.1.2011.5.25.195.3.1.14 | ColumnhwPoePortVoltage | read-only | current | This object indicates the voltage of an interface. The value is expressed in V. |
| 1.3.6.1.4.1.2011.5.25.195.3.1.15 | ColumnhwPoePortManualOperation | read-write | current | This object indicates that a PD connected to an interface is powered on or powered off manually. |
| 1.3.6.1.4.1.2011.5.25.195.39 | NodehwPoeTrapObjects | |||
| 1.3.6.1.4.1.2011.5.25.195.39.1 | ScalarhwPoePdPriority | accessible-for-notify | current | This object identifies the PD priority.(1:critical, 2:high, 3:low(default)) |
| 1.3.6.1.4.1.2011.5.25.195.39.2 | ScalarhwPoeSlotNum | accessible-for-notify | current | This object identifies the slot ID. |
| 1.3.6.1.4.1.2011.5.25.195.39.3 | ScalarhwPoeCurConsumPower | accessible-for-notify | current | This object identifies the current consuming power. |
| 1.3.6.1.4.1.2011.5.25.195.39.4 | ScalarhwPoeConsumPowerThreshold | accessible-for-notify | current | This object identifies the threshold of consuming power. |
| 1.3.6.1.4.1.2011.5.25.195.39.5 | ScalarhwPoeDeviceID | accessible-for-notify | current | This object identifies the device ID. |
| 1.3.6.1.4.1.2011.5.25.195.39.6 | ScalarhwFrameID | accessible-for-notify | current | This object identifies the CSS Frame ID. |
| 1.3.6.1.4.1.2011.5.25.195.40 | NodehwPoeNotification | |||
| 1.3.6.1.4.1.2011.5.25.195.40.1 | NotificationhwPoeDimmError | current | This object indicates the Dimm chip error. | |
| 1.3.6.1.4.1.2011.5.25.195.40.2 | NotificationhwPoePowerOff | current | This object indicates a PD connected to an interface is powered off. | |
| 1.3.6.1.4.1.2011.5.25.195.40.3 | NotificationhwPoePowerOn | current | This object indicates that a PD connected to an interface is powered on. | |
| 1.3.6.1.4.1.2011.5.25.195.40.4 | NotificationhwPoeSlotPowerOverload | current | This object indicates that the power consumed by a slot exceeds the threshold. | |
| 1.3.6.1.4.1.2011.5.25.195.40.5 | NotificationhwPoeSlotPowerOverloadResume | current | This object indicates that the power consumed by a slot does not exceed the threshold. | |
| 1.3.6.1.4.1.2011.5.25.195.40.6 | NotificationhwPoePdPowerOverload | current | This object indicates the power consumed by a PD connected to an interface exceeds the threshold. | |
| 1.3.6.1.4.1.2011.5.25.195.40.7 | NotificationhwPoePdPowerOverloadResume | current | This object indicates that the power consumed by a PD connected to an interface does not exceed the threshold. | |
| 1.3.6.1.4.1.2011.5.25.195.40.8 | NotificationhwPoePdConnected | current | This object indicates that a PD is connected to an interface. | |
| 1.3.6.1.4.1.2011.5.25.195.40.9 | NotificationhwPoePdDisconnected | current | This object indicates that a PD is disconnected from an interface. | |
| 1.3.6.1.4.1.2011.5.25.195.40.10 | NotificationhwPoePdClassInvalid | current | This object indicates that a PD of an invalid class is detected. | |
| 1.3.6.1.4.1.2011.5.25.195.40.11 | NotificationhwPoePdClassOvercurrent | current | This object indicates that overcurrent occurs during the classification of a PD. | |
| 1.3.6.1.4.1.2011.5.25.195.40.12 | NotificationhwPoePdPowerOvercurrent | current | This object indicates that overcurrent occurs during the powering of a PD. | |
| 1.3.6.1.4.1.2011.5.25.195.40.13 | NotificationhwPoePdPowerOvercurrentResume | current | This object indicates that overcurrent is rectified. | |
| 1.3.6.1.4.1.2011.5.25.195.40.14 | NotificationhwPoePowerOnFail | current | This object indicates that a PD fails to be powered on. | |
| 1.3.6.1.4.1.2011.5.25.195.40.15 | NotificationhwPoePowerOffCurrentLimits | current | This object indicates that a PD is powered off because its current meets or exceeds the limit of current. | |
| 1.3.6.1.4.1.2011.5.25.195.40.16 | NotificationhwPoePdPriorityDifferent | current | This object indicates that the priority of PD is different from the port. | |
| 1.3.6.1.4.1.2011.5.25.195.40.17 | NotificationhwPoePowerOverUtilizationThreshold | current | This object indicates that the PSE is overdrawing power. | |
| 1.3.6.1.4.1.2011.5.25.195.40.18 | NotificationhwPoePowerOverUtilizationThresholdResume | current | This object indicates that the PSE is not overdrawing power. | |
| 1.3.6.1.4.1.2011.5.25.195.40.19 | NotificationhwPoeBoardInsertedWrongFrame | current | This object indicates that the poe board is inserted in the frame does not support poe. | |
| 1.3.6.1.4.1.2011.5.25.195.40.20 | NotificationhwPoePowerAbsent | current | This object indicates that the poe power is absent. | |
| 1.3.6.1.4.1.2011.5.25.195.40.21 | NotificationhwPoePowerAbsentResume | current | This object indicates that the poe power is present. | |
| 1.3.6.1.4.1.2011.5.25.195.40.22 | NotificationhwPoeRpsPowerOutputAlarm | current | This object indicates that the RPS power can not provide POE power for this device. | |
| 1.3.6.1.4.1.2011.5.25.195.40.23 | NotificationhwPoeRpsPowerOutputAlarmResume | current | This object indicates that the RPS power can provide POE power for this device. | |
| 1.3.6.1.4.1.2011.5.25.195.100 | NodehwPoeConformance | |||
| 1.3.6.1.4.1.2011.5.25.195.100.1 | NodehwPoeGroups | |||
| 1.3.6.1.4.1.2011.5.25.195.100.1.1 | GrouphwPoeSlotGroup | current | This object indicates the POE's slot table group. | |
| 1.3.6.1.4.1.2011.5.25.195.100.1.2 | GrouphwPoePortGroup | current | This object indicates the POE's port table group. | |
| 1.3.6.1.4.1.2011.5.25.195.100.1.3 | GrouphwPoeGlobalGroup | current | This object indicates the POE's global table group. | |
| 1.3.6.1.4.1.2011.5.25.195.100.1.4 | GrouphwPoeNotificationGroup | current | This object indicates the POE's notification table group. | |
| 1.3.6.1.4.1.2011.5.25.195.100.1.5 | GrouphwPoeTrapObjectsGroup | current | Description. |