MIB Viewer

HUAWEI-RRPP-MIB

103 objects
The RRPP (Rapid Ring Protection protocol) provides fast protection switching to layer 2 switches interconnected in an Ethernet ring topology. When a link in the ring breaks, the RRPP can recover the data path quickly. Its protection switching is similar to what can be achieved with the Spanning Tree Protocol (STP), but the converging time is less than a second after link failure. This MIB defines management information used on products which support RRPP.
Imported Objects
HUAWEI-MIBhwDatacomm
IF-MIBifName InterfaceIndex
Q-BRIDGE-MIBVlanId
SNMPv2-CONFMODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP
SNMPv2-SMICounter32 Integer32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE
SNMPv2-TCRowStatus TEXTUAL-CONVENTION
OIDNameAccessStatusDescription
1.3.6.1.4.1.2011.5.25.113IdentityhwRrppThe RRPP (Rapid Ring Protection protocol) provides fast protection switching to layer 2 switches interconnected in an Ethernet ring topology. When a link in th…
1.3.6.1.4.1.2011.5.25.113.1NodehwRrppScalarGroup
1.3.6.1.4.1.2011.5.25.113.1.1ScalarhwRrppEnableStatusread-writecurrentIndicating whether the RRPP is enabled on this switch.
1.3.6.1.4.1.2011.5.25.113.1.2ScalarhwRrppLinkupDelayTimeread-writecurrentThis value indicates the delay when ports change to Up. The value of this node ranges with products. The default value is 0.
1.3.6.1.4.1.2011.5.25.113.2NodehwRrppTable
1.3.6.1.4.1.2011.5.25.113.2.1TablehwRrppDomainTablenot-accessiblecurrentA table containing information about configurations and status of a RRPP domain.
1.3.6.1.4.1.2011.5.25.113.2.1.1RowhwRrppDomainEntrynot-accessiblecurrentDetailed information of a specified RRPP domain.
1.3.6.1.4.1.2011.5.25.113.2.1.1.1ColumnhwRrppDomainIDnot-accessiblecurrentAn index uniquely identifies a RRPP domain. This value can't be modified after created.
1.3.6.1.4.1.2011.5.25.113.2.1.1.2ColumnhwRrppDomainControlVlanIDread-createcurrentIndex of the control VLAN specified to a domain. The value 65535 indicates the control VLAN has not been configured. The VLAN assigned to a RRPP Domain must no…
1.3.6.1.4.1.2011.5.25.113.2.1.1.3ColumnhwRrppDomainHelloTimeread-createcurrentThe value indicates the interval between two hello packets sent by master-node, and its unit is second. The value ranges from 1s~10s.
1.3.6.1.4.1.2011.5.25.113.2.1.1.4ColumnhwRrppDomainFailTimeread-createcurrentThe expiration value of the fail-period timer and its unit is second. If not receiving hello packets before this expires, the master-node considers the ring is…
1.3.6.1.4.1.2011.5.25.113.2.1.1.5ColumnhwRrppDomainRowStatusread-createcurrentThis object is responsible for managing the creation, deletion and modification of rows, which support active status and CreatAndGo, destroy operation.
1.3.6.1.4.1.2011.5.25.113.2.1.1.6ColumnhwRrppDomainResetStatisticsread-createcurrentClears the statistics of packets received and sent on the current domain.
1.3.6.1.4.1.2011.5.25.113.2.1.1.7ColumnhwRrppMulSubRingProtectionread-createcurrentIndicating whether the rrpp mul-sub-ring protection is enabled on this switch.
1.3.6.1.4.1.2011.5.25.113.2.1.1.8ColumnhwRrppDomainProtectedVlanread-createcurrentInformation of instance index protected by a domain. The instance index ranging from 0 to 48 is listed in a character string in order. The value of each charac…
1.3.6.1.4.1.2011.5.25.113.2.1.1.9ColumnhwRrppDomainDescriptionread-createcurrentA textual description of the RRPP domain. It is mandatory that this only contain no more than 255 printable ASCII characters.
1.3.6.1.4.1.2011.5.25.113.2.1.1.10ColumnhwRrppDomainProtectedInstanceread-createcurrentInformation of instance index protected by a domain.
1.3.6.1.4.1.2011.5.25.113.2.2TablehwRrppRingTablenot-accessiblecurrentA table containing information about configurations and status of a RRPP Ring.
1.3.6.1.4.1.2011.5.25.113.2.2.1RowhwRrppRingEntrynot-accessiblecurrentDetailed information of a specified RRPP Ring.
1.3.6.1.4.1.2011.5.25.113.2.2.1.1ColumnhwRrppRingIDnot-accessiblecurrentAn index uniquely identifies a RRPP Ring. This value can't be modified after created.
1.3.6.1.4.1.2011.5.25.113.2.2.1.2ColumnhwRrppRingEnableStatusread-createcurrentIndicating whether the RRPP is enabled on this Ring. NOTE: If major-ring and sub-ring(s) of a domain coexist on a switch, major-ring must be enabled before sub…
1.3.6.1.4.1.2011.5.25.113.2.2.1.3ColumnhwRrppRingActiveread-onlycurrentAs both hwRrppEnableStatus and hwRrppRingEnableStatus are enabled, the ring is activated. Whereas either of the two items is disabled, the ring is inactive.
1.3.6.1.4.1.2011.5.25.113.2.2.1.4ColumnhwRrppRingStateread-onlycurrentThe status (i.e. unknown, health or fault) of the Ethernet ring.
1.3.6.1.4.1.2011.5.25.113.2.2.1.5ColumnhwRrppRingNodeModeread-createcurrentThere are four RRPP node modes for the switch on a RRPP ring, such as master, transit, edge and assistant-edge. Each RRPP ring has a single designated master-n…
1.3.6.1.4.1.2011.5.25.113.2.2.1.6ColumnhwRrppRingPrimaryPortread-createcurrentIf the switch is a master-node or transit-node, this value is ifIndex of the primary port; otherwise, if the switch is an edge-node or assistant-edge-node, thi…
1.3.6.1.4.1.2011.5.25.113.2.2.1.7ColumnhwRrppRingSecondaryPortread-createcurrentIf the switch is a master-node or transit-node, this value is ifIndex of the secondary port; otherwise, if the switch is an edge-node or assistant-edge-node, t…
1.3.6.1.4.1.2011.5.25.113.2.2.1.8ColumnhwRrppRingLevelread-createcurrentLevel of a ring. This field should be set 0 on major-ring and 1 on the sub-ring. This value can't be modified after created.
1.3.6.1.4.1.2011.5.25.113.2.2.1.9ColumnhwRrppRingRowStatusread-createcurrentThis object is responsible for managing the creation, deletion and modification of rows, which support active status and CreatAndGo, destroy operation. To crea…
1.3.6.1.4.1.2011.5.25.113.2.2.1.10ColumnhwRrppRingResetStatisticsread-createcurrentClears the statistics of packets received and sent on the current ring.
1.3.6.1.4.1.2011.5.25.113.2.3TablehwRrppPortTablenot-accessiblecurrentA table containing information about configurations and status of a RRPP port.
1.3.6.1.4.1.2011.5.25.113.2.3.1RowhwRrppPortEntrynot-accessiblecurrentDetailed information of a specified RRPP port.
1.3.6.1.4.1.2011.5.25.113.2.3.1.1ColumnhwRrppPortIDnot-accessiblecurrentLogical index of the interface index.
1.3.6.1.4.1.2011.5.25.113.2.3.1.2ColumnhwRrppPortTyperead-onlycurrentThe interface type of the RRPP port. (i.e. FE, GE, VE, Eth-Trunk, XGE and etc).
1.3.6.1.4.1.2011.5.25.113.2.3.1.3ColumnhwRrppPortRoleread-onlycurrentThe RRPP role of the port. (i.e. primary, secondary, common or edge port).
1.3.6.1.4.1.2011.5.25.113.2.3.1.4ColumnhwRrppPortStateread-onlycurrentState of RRPP port, including unknown, unblocked, blocked and down.
1.3.6.1.4.1.2011.5.25.113.2.3.1.5ColumnhwRrppPortRXErrorread-onlycurrentThe statistics of illegal RRPP packets received from this port.
1.3.6.1.4.1.2011.5.25.113.2.3.1.6ColumnhwRrppPortRXHelloread-onlycurrentThe statistics of hello packets received from this port on specified ring.
1.3.6.1.4.1.2011.5.25.113.2.3.1.7ColumnhwRrppPortRXLinkUpread-onlycurrentThe statistics of link-up packets received from this port on specified ring.
1.3.6.1.4.1.2011.5.25.113.2.3.1.8ColumnhwRrppPortRXLinkDownread-onlycurrentThe statistics of link-down packets received from this port on specified ring.
1.3.6.1.4.1.2011.5.25.113.2.3.1.9ColumnhwRrppPortRXCommonFlushread-onlycurrentThe statistics of common-flush packets received from this port on specified ring. Instruction When master-node receives valid link-down packets or link-up pack…
1.3.6.1.4.1.2011.5.25.113.2.3.1.10ColumnhwRrppPortRXCompleteFlushread-onlycurrentThe statistics of complete-flush packets received from this port on specified ring. Instruction When the ring recovers, master-node will receive its own hello …
1.3.6.1.4.1.2011.5.25.113.2.3.1.11ColumnhwRrppPortRXEdgeHelloread-onlycurrentThe statistics of edge-hello packets received from this port on specified ring. Instruction When edge-node sends edge-hello packets, assistantEdge-node will re…
1.3.6.1.4.1.2011.5.25.113.2.3.1.12ColumnhwRrppPortRXMajorFaultread-onlycurrentThe statistics of major-fault packets received from this port on specified ring. Instruction When assistantEdge can't receive edge-hello packets in the specifi…
1.3.6.1.4.1.2011.5.25.113.2.3.1.13ColumnhwRrppPortTXErrorread-onlycurrentThe statistics of RRPP packets failed to send out of this port.
1.3.6.1.4.1.2011.5.25.113.2.3.1.14ColumnhwRrppPortTXHelloread-onlycurrentThe statistics of hello packets sent from this port on specified ring.
1.3.6.1.4.1.2011.5.25.113.2.3.1.15ColumnhwRrppPortTXLinkUpread-onlycurrentThe statistics of link-up packets sent from this port on specified ring.
1.3.6.1.4.1.2011.5.25.113.2.3.1.16ColumnhwRrppPortTXLinkDownread-onlycurrentThe statistics of link-down packets sent from this port on specified ring.
1.3.6.1.4.1.2011.5.25.113.2.3.1.17ColumnhwRrppPortTXCommonFlushread-onlycurrentThe statistics of common-flush packets sent from this port on specified ring.
1.3.6.1.4.1.2011.5.25.113.2.3.1.18ColumnhwRrppPortTXCompleteFlushread-onlycurrentThe statistics of complete-flush packets sent from this port on specified ring.
1.3.6.1.4.1.2011.5.25.113.2.3.1.19ColumnhwRrppPortTXEdgeHelloread-onlycurrentThe statistics of edge-hello packets sent from this port on specified ring.
1.3.6.1.4.1.2011.5.25.113.2.3.1.20ColumnhwRrppPortTXMajorFaultread-onlycurrentThe statistics of major-fault packets sent from this port on specified ring.
1.3.6.1.4.1.2011.5.25.113.2.4TablehwRrppTrackInterfaceTablenot-accessiblecurrentA table containing information about tracking port.
1.3.6.1.4.1.2011.5.25.113.2.4.1RowhwRrppTrackInterfaceEntrynot-accessiblecurrentDetailed information of a specified RRPP track interface.
1.3.6.1.4.1.2011.5.25.113.2.4.1.1ColumnhwRrppTrackInterfaceIDnot-accessiblecurrentLogical index of track interface.
1.3.6.1.4.1.2011.5.25.113.2.4.1.2ColumnhwRrppTrackRowStatusread-createcurrentThis object is responsible for managing the creation, deletion and modification of rows, which support active status and CreatAndGo, destroy operation.
1.3.6.1.4.1.2011.5.25.113.2.5TablehwRrppRingGroupTablenot-accessiblecurrentA table containing information about an RRPP ring group and created without the domain or ring.
1.3.6.1.4.1.2011.5.25.113.2.5.1RowhwRrppRingGroupEntrynot-accessiblecurrentDetailed information about a specified RRPP ring group.
1.3.6.1.4.1.2011.5.25.113.2.5.1.1ColumnhwRrppRingGroupIDnot-accessiblecurrentindex of the RRPP ring group. This value can't be modified after created.
1.3.6.1.4.1.2011.5.25.113.2.5.1.2ColumnhwRrppRingGroupRowStatusread-createcurrentRow status in the ring group configuration table. hwRrppRingGroupID must be specified to create a row.
1.3.6.1.4.1.2011.5.25.113.2.6TablehwRrppRingGroupMemberTablenot-accessiblecurrentA table containing information about the configurations and status of an RRPP ring.
1.3.6.1.4.1.2011.5.25.113.2.6.1RowhwRrppRingGroupMemberEntrynot-accessiblecurrentDetailed information about a specified RRPP ring group.
1.3.6.1.4.1.2011.5.25.113.2.6.1.1ColumnhwRrppRingGroupMemberDomainIDnot-accessiblecurrentIndex, namely, domain ID of the members of a ring group. This value cannot be modified after created.
1.3.6.1.4.1.2011.5.25.113.2.6.1.2ColumnhwRrppRingGroupMemberRingIDnot-accessiblecurrentIndex, namely, ring ID of the members of a ring group. This value cannot be modified after created.
1.3.6.1.4.1.2011.5.25.113.2.6.1.3ColumnhwRrppRingGroupIsEdgeHelloProcessread-onlycurrentFlag carried in the sent edge-Hello Packet.
1.3.6.1.4.1.2011.5.25.113.2.6.1.4ColumnhwRrppRingGroupMemberRowStatusread-createcurrentRow status in the ring group configuration table. hwRrppRingGroupMemberDomainID, hwRrppRingGroupMemberRingID, and hwRrppRingGroupIsEdgeHelloSender must be spec…
1.3.6.1.4.1.2011.5.25.113.3NodehwRrppSnoopingTable
1.3.6.1.4.1.2011.5.25.113.3.1TablehwRrppSnoopingInterfaceTablenot-accessiblecurrentA table containing information about RRPP snooping enable interface.
1.3.6.1.4.1.2011.5.25.113.3.1.1RowhwRrppSnoopingInterfaceEntrynot-accessiblecurrentDetailed information of a specified RRPP snooping enable interface.
1.3.6.1.4.1.2011.5.25.113.3.1.1.1ColumnhwRrppSnoopingInterfaceIdnot-accessiblecurrentLogical index of the interface index.
1.3.6.1.4.1.2011.5.25.113.3.1.1.2ColumnhwRrppSnoopingVsiNameread-onlycurrentThe name of VSI which the interface was binding to.
1.3.6.1.4.1.2011.5.25.113.3.1.1.3ColumnhwRrppSnoopingVlanIdread-onlycurrentThe VLAN which the intertace added to.
1.3.6.1.4.1.2011.5.25.113.3.1.1.4ColumnhwRrppSnoopingEnableStatusread-createcurrentIndicating whether the RRPP snooping is enabled on this switch.
1.3.6.1.4.1.2011.5.25.113.3.1.1.5ColumnhwRrppSnoopingRowStatusread-createcurrentThis object is responsible for managing the creation, deletion and modification of rows, which support active status and CreatAndGo, destroy operation.
1.3.6.1.4.1.2011.5.25.113.3.1.1.6ColumnhwRrppSnoopingAllVsiStatusread-createcurrentIndicating whether the RRPP snooping is associating all vsi on this switch. Options: 1. enabled(1) -indicates that the RRPP snooping is associated with all vsi…
1.3.6.1.4.1.2011.5.25.113.3.1.1.7ColumnhwRrppSnoopingRecvPacketsread-onlycurrentThe statistics of common-flush or complete-flush packets received from this port.
1.3.6.1.4.1.2011.5.25.113.3.1.1.8ColumnhwRrppSnoopingResetStatisticsread-createcurrentClears the statistics of packets received from this port.
1.3.6.1.4.1.2011.5.25.113.3.2TablehwRrppSnoopingVsiTablenot-accessiblecurrentA table containing information about RRPP snooping relating interface.
1.3.6.1.4.1.2011.5.25.113.3.2.1RowhwRrppSnoopingVsiEntrynot-accessiblecurrentDetailed information of a specified RRPP snooping relating interface.
1.3.6.1.4.1.2011.5.25.113.3.2.1.1ColumnhwRrppSnoopingVsiInterfaceIdnot-accessiblecurrentLogical index of the interface index.
1.3.6.1.4.1.2011.5.25.113.3.2.1.2ColumnhwVsiNamenot-accessiblecurrentThe name of VSI.
1.3.6.1.4.1.2011.5.25.113.3.2.1.3ColumnhwRrppSnoopingVsiRowStatusread-createcurrentThis object is responsible for managing the creation, deletion and modification of rows, which support active status and CreatAndGo, destroy operation.
1.3.6.1.4.1.2011.5.25.113.4NodehwRrppNotifications
1.3.6.1.4.1.2011.5.25.113.4.1NotificationhwRrppRingRecovercurrentTrap message is generated by master-node on the ring when the ring recovers from fault.
1.3.6.1.4.1.2011.5.25.113.4.2NotificationhwRrppRingFailcurrentTrap message is generated by master-node on the ring when the ring fails.
1.3.6.1.4.1.2011.5.25.113.4.3NotificationhwRrppMultiMastercurrentTrap message is generated by master-node when it detects there are more than one master-node on the ring.
1.3.6.1.4.1.2011.5.25.113.4.4NotificationhwRrppTrackInterfaceDowncurrentTrap message is generated by RRPP node when the track interface tracked BFD down.
1.3.6.1.4.1.2011.5.25.113.4.5NotificationhwRrppTrackInterfaceUpcurrentTrap message is generated by RRPP node when the track interface tracked BFD up.
1.3.6.1.4.1.2011.5.25.113.4.6NotificationhwRrppRingSingleDirectionFailcurrentTrap message is generated by master-node on the ring when the ring fails from the primary port to the secondary port.
1.3.6.1.4.1.2011.5.25.113.5NodehwRrppMibGroup
1.3.6.1.4.1.2011.5.25.113.5.1GrouphwRrppGlobalGroupcurrentThe RRPP global group.
1.3.6.1.4.1.2011.5.25.113.5.2GrouphwRrppDomainGroupcurrentThe RRPP domain group.
1.3.6.1.4.1.2011.5.25.113.5.3GrouphwRrppRingGroupcurrentThe RRPP ring group.
1.3.6.1.4.1.2011.5.25.113.5.4GrouphwRrppPortGroupcurrentThe RRPP port group.
1.3.6.1.4.1.2011.5.25.113.5.5GrouphwRrppTrackInterfaceGroupcurrentThe RRPP Track Interface group.
1.3.6.1.4.1.2011.5.25.113.5.6GrouphwRrppRingGroupGroupcurrentThe RRPP RingGroup group.
1.3.6.1.4.1.2011.5.25.113.5.7GrouphwRrppRingGroupMemberGroupcurrentThe RRPP RingGroupMember group.
1.3.6.1.4.1.2011.5.25.113.5.8GrouphwRrppSnoopingInterfaceGroupcurrentThe RRPP Snooping enable Interface group.
1.3.6.1.4.1.2011.5.25.113.5.9GrouphwRrppSnoopingVsiGroupcurrentThe RRPP Snooping associate vsi group.
1.3.6.1.4.1.2011.5.25.113.5.10GrouphwRrppNotificationGroupcurrentThe notification group.
1.3.6.1.4.1.2011.5.25.113.6NodehwRrppConformance
1.3.6.1.4.1.2011.5.25.113.6.1NodehwRrppCompliances
1.3.6.1.4.1.2011.5.25.113.6.1.1CompliancehwRrppCompliancecurrentThe core compliance statement for all implementations.
Type Definitions
NameSyntaxStatusDescription
EnabledStatusINTEGER { enabled(1), disabled(2) }currentA simple status value for the object.