HUAWEI-TAD-MIB
35 objects
The Custom damping MIB module is defined to manage the configuration under system or interface view.
Imported Objects
| HUAWEI-MIB | hwDatacomm |
| IF-MIB | ifIndex InterfaceIndex |
| SNMPv2-SMI | Integer32 MODULE-IDENTITY OBJECT-IDENTITY OBJECT-TYPE |
| SNMPv2-TC | DateAndTime DisplayString TEXTUAL-CONVENTION |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2011.5.25.128 | IdentityhwTAD | The Custom damping MIB module is defined to manage the configuration under system or interface view. | ||
| 1.3.6.1.4.1.2011.5.25.128.1 | NodehwTADObjects | |||
| 1.3.6.1.4.1.2011.5.25.128.1.1 | TablehwTADInterfaceTable | not-accessible | current | Transmission alarm damping interface configuration table. |
| 1.3.6.1.4.1.2011.5.25.128.1.1.1 | RowhwTADInterfaceEntry | not-accessible | current | The entry of a SDH or SONET interface with damping function enabled. |
| 1.3.6.1.4.1.2011.5.25.128.1.1.1.1 | ColumnhwTADInterfaceIndex | not-accessible | current | Index number of the interface. |
| 1.3.6.1.4.1.2011.5.25.128.1.1.1.2 | ColumnhwTADFilterEnable | read-write | current | Whether filter function is enabled. |
| 1.3.6.1.4.1.2011.5.25.128.1.1.1.3 | ColumnhwTADFilterExpireTime | read-write | current | How long the alarm will be postponed to process. Unit: millisecond. |
| 1.3.6.1.4.1.2011.5.25.128.1.1.1.4 | ColumnhwTADDampingEnable | read-write | current | Whether damping function is enabled. |
| 1.3.6.1.4.1.2011.5.25.128.1.1.1.5 | ColumnhwTADSuppress | read-write | current | The suppressing value. When figure-of-merit of alarm exceeds this value, this alarm will be damped. |
| 1.3.6.1.4.1.2011.5.25.128.1.1.1.6 | ColumnhwTADCeiling | read-write | current | The ceiling value. Figure-of-merit can't exceed this value. The ceiling value must be larger than suppressing value. |
| 1.3.6.1.4.1.2011.5.25.128.1.1.1.7 | ColumnhwTADReuse | read-write | current | The reusing value. When figure-of-merit becomes lower than this value. The alarm will be reused (exit from suppressing status). The reusing value must be less … |
| 1.3.6.1.4.1.2011.5.25.128.1.1.1.8 | ColumnhwTADDecayOk | read-write | current | The half decay time when alarm status is down. Unit: millisecond. |
| 1.3.6.1.4.1.2011.5.25.128.1.1.1.9 | ColumnhwTADDecayNg | read-write | current | The half decay time when alarm status is up. Unit: millisecond. |
| 1.3.6.1.4.1.2011.5.25.128.1.1.1.10 | ColumnhwTADResetStatistics | read-write | current | Whether to reset alarm statistics. 1 means resetting statistics once. |
| 1.3.6.1.4.1.2011.5.25.128.1.1.1.11 | ColumnhwTADResetTime | read-only | current | Last reset time. |
| 1.3.6.1.4.1.2011.5.25.128.1.1.1.12 | ColumnhwTADB3tcaThreshold | read-write | current | B3tca threshold in form of 10e-n. |
| 1.3.6.1.4.1.2011.5.25.128.1.1.1.13 | ColumnhwTADSdbereThreshold | read-write | current | Sdbere threshold in form of 10e-n. |
| 1.3.6.1.4.1.2011.5.25.128.1.1.1.14 | ColumnhwTADSfbereThreshold | read-write | current | Sfbere threshold in form of 10e-n. |
| 1.3.6.1.4.1.2011.5.25.128.1.2 | TablehwTADAlarmTable | not-accessible | current | Transmission alarm damping alarm configuration table. |
| 1.3.6.1.4.1.2011.5.25.128.1.2.1 | RowhwTADAlarmEntry | not-accessible | current | The entry of an alarm. |
| 1.3.6.1.4.1.2011.5.25.128.1.2.1.1 | ColumnhwTADAlarmIfIndex | not-accessible | current | Index number of the interface. |
| 1.3.6.1.4.1.2011.5.25.128.1.2.1.2 | ColumnhwTADAlarmType | not-accessible | current | Index number of the alarm. The range is from 1 to 22, corresponding to: auais, batca, lais, lof, lom, lop, los, lrdi, lrei, oof, pais, prdi, prei, pplm, rdool,… |
| 1.3.6.1.4.1.2011.5.25.128.1.2.1.3 | ColumnhwTADAlarmIfDown | read-write | current | Whether this alarm leads to interface down. In default lais, lof and los are enabled to lead interface down. |
| 1.3.6.1.4.1.2011.5.25.128.1.2.1.4 | ColumnhwTADAlarmLog | read-write | current | Whether this alarm will be logged. In default all alarm types won't be logged. |
| 1.3.6.1.4.1.2011.5.25.128.1.2.1.5 | ColumnhwTADAlarmStatus | read-only | current | The status of the alarm. 1 means alarm is up, 2 means alarm is down. |
| 1.3.6.1.4.1.2011.5.25.128.1.2.1.6 | ColumnhwTADAlarmInFilter | read-only | current | Whether this alarm is in filtering status. 1 means alarm is in filtering status, 2 means alarm isn't in filtering status. |
| 1.3.6.1.4.1.2011.5.25.128.1.2.1.7 | ColumnhwTADAlarmFigure | read-only | current | This figure is used to evaluate the stability of the alarm. Large value means un-stability. |
| 1.3.6.1.4.1.2011.5.25.128.1.2.1.8 | ColumnhwTADAlarmInSuppress | read-only | current | Whether this alarm is in suppressing status. 1 means alarm is in suppressing status, 2 means alarm isn't in suppressing status. |
| 1.3.6.1.4.1.2011.5.25.128.1.2.1.9 | ColumnhwTADAlarmFlappingCount | read-only | current | How many times alarm's status changed. |
| 1.3.6.1.4.1.2011.5.25.128.1.2.1.10 | ColumnhwTADAlarmSuppressCount | read-only | current | How many times alarm is suppressed. |
| 1.3.6.1.4.1.2011.5.25.128.2 | NodehwTADConformance | |||
| 1.3.6.1.4.1.2011.5.25.128.2.1 | NodehwTADGroups | |||
| 1.3.6.1.4.1.2011.5.25.128.2.1.1 | GrouphwTADInterfaceGroup | current | A collection of objects providing device level control and status information for the interface. | |
| 1.3.6.1.4.1.2011.5.25.128.2.1.2 | GrouphwTADAlarmGroup | current | A collection of objects providing device level control and status information for the alarm. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| HWEnableValue | INTEGER { enable(1), disable(2) } | current | A simple status value for the object. |