HUAWEI-TDMCPE-MIB
138 objects
Huawei TDM Modem management MIB definition.
Imported Objects
| HUAWEI-MIB | huaweiMgmt |
| RFC1213-MIB | ifIndex |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | Gauge32 Integer32 IpAddress MODULE-IDENTITY OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | DisplayString |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2011.5.30 | IdentityhwTdmMIB | Huawei TDM Modem management MIB definition. | ||
| 1.3.6.1.4.1.2011.5.30.1 | NodehwTdmMIBObjects | |||
| 1.3.6.1.4.1.2011.5.30.1.1 | NodehwTdmTftpObjects | |||
| 1.3.6.1.4.1.2011.5.30.1.1.1 | TablehwTdmTftpTable | not-accessible | current | This table describes the reference information about a TDM modem tftp status. This information describe the TFTP server IP address, the file name, the TFTP com… |
| 1.3.6.1.4.1.2011.5.30.1.1.1.1 | RowhwTdmTftpEntry | not-accessible | current | This table describes the reference information about a TDM modem tftp status. This information describe the TFTP server IP address, the file name, the TFTP com… |
| 1.3.6.1.4.1.2011.5.30.1.1.1.1.1 | ColumnhwTdmTftpFileServerIP | read-write | current | This attribute indicates the TFTP server to update the modem software.This must be set before start the software download! |
| 1.3.6.1.4.1.2011.5.30.1.1.1.1.2 | ColumnhwTdmTftpFileName | read-write | current | This attribute indicates the name of the file to be sent to the modem. This must be set before start the software download! |
| 1.3.6.1.4.1.2011.5.30.1.1.1.1.3 | ColumnhwTdmTftpFileTransCmd | read-write | current | The command to be executed on hwTdmTftpFileName at hwTdmTftpFileServerIP. Options: 1. noOp(1) - Indicates that no operation. 2. downloadSW(2) - Indicates that … |
| 1.3.6.1.4.1.2011.5.30.1.1.1.1.4 | ColumnhwTdmTftpStatus | read-only | current | Status of tftp session. When a session ended with success, the tftpStatus should be endedOk(6). Before restarting a tftp session, the modem should set the tftp… |
| 1.3.6.1.4.1.2011.5.30.1.2 | NodehwTdmModemObjects | |||
| 1.3.6.1.4.1.2011.5.30.1.2.1 | TablehwTdmModemInfoTable | not-accessible | current | This table describes the reference information about a TDM modem system information. This information describe the maximum rate, the PSD type, the interface ty… |
| 1.3.6.1.4.1.2011.5.30.1.2.1.1 | RowhwTdmModemInfoEntry | not-accessible | current | This table describes the reference information about a TDM modem system information. This information describe the maximum rate, the PSD type, the interface ty… |
| 1.3.6.1.4.1.2011.5.30.1.2.1.1.2 | ColumnhwTdmModemInfoDteIfType | read-only | current | This object indicates the interface type of the DTE port. Options: 1. x21(0) - Indicates that the interface type of the DTE port is x21. 2. v35(1) - Indicates … |
| 1.3.6.1.4.1.2011.5.30.1.2.1.1.3 | ColumnhwTdmModemInfoWireMode | read-only | current | This object indicates the modem wiring. Options: 1. twoWire(1) - Indicates that the modem wiring is twoWire. 2. fourWire(2) - Indicates that the modem wiring i… |
| 1.3.6.1.4.1.2011.5.30.1.2.1.1.4 | ColumnhwTdmModemInfoModemType | read-only | current | This object indicates the actual ASMi52 type. Options: 1. none(0) - Indicates that the actual ASMi52 type is none. 2. cardData(1) - Indicates that the actual A… |
| 1.3.6.1.4.1.2011.5.30.1.2.1.1.5 | ColumnhwTdmModemInfoHwVer | read-only | current | This object indicates the display string of the modem hardware version. |
| 1.3.6.1.4.1.2011.5.30.1.2.1.1.6 | ColumnhwTdmModemInfoSwVer | read-only | current | Display String of the modem software version. Examples: 2.23A8 3.4 |
| 1.3.6.1.4.1.2011.5.30.1.2.1.1.7 | ColumnhwTdmModemSupportEOC | read-only | current | This object indicates whether the port supports the EOC or not. Options: 1. yes(1) - Indicates that the port supports the EOC. 2. no(2) - Indicates that the po… |
| 1.3.6.1.4.1.2011.5.30.1.2.1.1.8 | ColumnhwTdmModemLowerSpeedOper | read-only | current | This object indicates whether the modem run in lower speed or not. When you download file with V35 MODEM , it must be yes.If it is not, you can change it by re… |
| 1.3.6.1.4.1.2011.5.30.1.2.1.1.9 | ColumnhwTdmModemDtePortState | read-only | current | This object indicates the down port state. Options: 1. connect(1) - Indicates that the down port connected. 2. disconnect(2) - Indicates that the down port dis… |
| 1.3.6.1.4.1.2011.5.30.1.2.1.1.10 | ColumnhwTdmModemE1PortState | read-only | current | This object indicates the down port state. Options: 1. connect(1) - Indicates that the down port connected. 2. disconnect(2) - Indicates that the down port dis… |
| 1.3.6.1.4.1.2011.5.30.1.2.2 | TablehwTdmModemConfTable | not-accessible | current | This table describes the reference information about a TDM Modem configuration that may be used with G.SHDSL modem for configuration. This information describe… |
| 1.3.6.1.4.1.2011.5.30.1.2.2.1 | RowhwTdmModemConfEntry | not-accessible | current | This table describes the reference information about a TDM Modem configuration that may be used with G.SHDSL modem for configuration. This information describe… |
| 1.3.6.1.4.1.2011.5.30.1.2.2.1.1 | ColumnhwTdmModemConfAlarmAndPortMask | read-write | obsolete | This value identifies the alarm and port status report mask of the TDM remote modem in the far-end side. Options: 1. majorAlarmMask(1) - Indicates that mask is… |
| 1.3.6.1.4.1.2011.5.30.1.2.2.1.2 | ColumnhwTdmModemConfReset | read-write | current | This value identifies the reset command of the TDM remote modem in the far-end side. Changing this value can reset the device or the line, or set the configura… |
| 1.3.6.1.4.1.2011.5.30.1.2.2.1.3 | ColumnhwTdmModemAlrBufClear | read-write | current | This value indicates the switch to clear the Alarm buffer in the remote modem. Options: 1. on(1) - Indicates that the switch is on. 2. off(2) - Indicates that … |
| 1.3.6.1.4.1.2011.5.30.1.2.2.1.4 | ColumnhwTdmModemStatClear | read-write | current | This value indicates resetting statistics of the selected port. Options: 1. none(1) - Indicates that do nothing. 2. clearSHDSLA(2) - Indicates that clear SHDSL… |
| 1.3.6.1.4.1.2011.5.30.1.2.2.1.5 | ColumnhwTdmModemAlarmDevSeverity | read-write | current | This object indicates the alarms severity device bit mapping. |
| 1.3.6.1.4.1.2011.5.30.1.2.2.1.6 | ColumnhwTdmModemAlarmPortSeverity | read-write | current | This object indicates the alarms severity port bit mapping. |
| 1.3.6.1.4.1.2011.5.30.1.2.3 | TablehwTdmModemAlarmBufTable | not-accessible | current | This table describes the reference information about a TDM Modem alarm buffer that may be used for NMS polling. This information describe the alarm buffer inde… |
| 1.3.6.1.4.1.2011.5.30.1.2.3.1 | RowhwTdmModemAlarmBufEntry | not-accessible | current | This table describes the reference information about a TDM Modem alarm buffer that may be used for NMS polling. This information describe the alarm buffer inde… |
| 1.3.6.1.4.1.2011.5.30.1.2.3.1.1 | ColumnhwTdmModemAlarmBufIndex | not-accessible | current | This value indicates the alarm buffer index in the modem. |
| 1.3.6.1.4.1.2011.5.30.1.2.3.1.2 | ColumnhwTdmModemAlarmBufCode | read-only | current | The code of the alarm. For text description of each Alarm code see Modem's specification. |
| 1.3.6.1.4.1.2011.5.30.1.2.3.1.3 | ColumnhwTdmModemAlarmBufState | read-only | current | The new status of the alarm. Options: 1. on(1) - Indicates that the alarm is on. 2. off(2) - Indicates that the alarm is off. |
| 1.3.6.1.4.1.2011.5.30.1.2.3.1.4 | ColumnhwTdmModemAlarmBufSeverity | read-only | current | The severity of the alarm. Options: 1. major(1) - Indicates that the alarm is major. 2. minor(2) - Indicates that the alarm is minor. 3. warning(3) - Indicates… |
| 1.3.6.1.4.1.2011.5.30.1.3 | NodehwTdmPortObjects | |||
| 1.3.6.1.4.1.2011.5.30.1.3.1 | NodehwTdmPortConfObjects | |||
| 1.3.6.1.4.1.2011.5.30.1.3.1.1 | TablehwTdmShdslConfTable | not-accessible | current | This table describes the information about a TDM Modem SHDSL port configuration. This information describe the SHDSL port index, power backoff mode, worst case… |
| 1.3.6.1.4.1.2011.5.30.1.3.1.1.1 | RowhwTdmShdslConfEntry | not-accessible | current | This table describes the information about a TDM Modem SHDSL port configuration. This information describe the SHDSL port index, power backoff mode, worst case… |
| 1.3.6.1.4.1.2011.5.30.1.3.1.1.1.1 | ColumnhwTdmShdslConfPowerBackOff | read-write | current | This object configures the receiver at the associated segment endpoint to operate in power backoff mode. Options: 1. enable(1) - Indicates that enable the func… |
| 1.3.6.1.4.1.2011.5.30.1.3.1.1.1.2 | ColumnhwTdmShdslConfWorstCaseSNRMargin | read-write | current | This object specifies the upstream worst case target SNR margin for a SHDSL line. The SNR margin is the difference between the desired SNR and the actual SNR. … |
| 1.3.6.1.4.1.2011.5.30.1.3.1.1.1.3 | ColumnhwTdmShdslConfCurrentSNRMargin | read-write | current | This object specifies the upstream current condition target SNR margin for a SHDSL line. The SNR margin is the difference between the desired SNR and the actua… |
| 1.3.6.1.4.1.2011.5.30.1.3.1.1.1.4 | ColumnhwTdmShdslConfPSD | read-only | current | This object configures use of symmetric/asymmetric PSD (Power Spectral Density) Mask for the associated SHDSL Line. Support for symmetric PSD is mandatory for … |
| 1.3.6.1.4.1.2011.5.30.1.3.1.1.1.5 | ColumnhwTdmShdslConfLineProbe | read-only | current | This object enables/disables support for Line Probe of the units in a SHDSL line. When Line Probe is enabled, the system performs Line Probing to find the best… |
| 1.3.6.1.4.1.2011.5.30.1.3.1.1.1.6 | ColumnhwTdmShdslConfThreshLoopAttenuation | read-write | current | This object configures the loop attenuation alarm threshold. |
| 1.3.6.1.4.1.2011.5.30.1.3.1.1.1.7 | ColumnhwTdmShdslConfThreshSNRMargin | read-write | current | This object configures the SNR margin alarm threshold. |
| 1.3.6.1.4.1.2011.5.30.1.3.1.1.1.8 | ColumnhwTdmShdslConfWireInterface | read-write | current | This object configures the two-wire or optional four-wire operation for SHDSL Lines. Options: 1. twoWire(1) - Indicates that the operation for SHDSL Lines is t… |
| 1.3.6.1.4.1.2011.5.30.1.3.1.1.1.9 | ColumnhwTdmShdslConfTestTimeout | read-write | current | This object is applicable only when a single test is running. It indicates the test activation timeout in minutes. When the timeout expires, the test is stoppe… |
| 1.3.6.1.4.1.2011.5.30.1.3.1.1.1.10 | ColumnhwTdmShdslConfTestCmd | read-write | current | Setting this object to a value as detailed further on will initiate a test on the specific port. The terminology and order of the first tests is according to t… |
| 1.3.6.1.4.1.2011.5.30.1.3.1.2 | TablehwTdmE1ConfTable | not-accessible | current | This table describes the reference information about a TDM Modem E1 port configuration. This information describe the E1 port index, line type, sync, idelcode … |
| 1.3.6.1.4.1.2011.5.30.1.3.1.2.1 | RowhwTdmE1ConfEntry | not-accessible | current | This table describes the reference information about a TDM Modem E1 port configuration. This information describe the E1 port index, line type, sync, idelcode … |
| 1.3.6.1.4.1.2011.5.30.1.3.1.2.1.1 | ColumnhwTdmE1ConfLineType | read-write | current | This variable indicates the variety of T1/E1 Line implementing this circuit. The type of circuit affects the number of bits per second that the circuit can rea… |
| 1.3.6.1.4.1.2011.5.30.1.3.1.2.1.2 | ColumnhwTdmE1ConfSync | read-write | current | This object enables returning to normal operation, after the end of a main/sub link red alarm event, in reduced time. 'tr62411' - complies with AT&T TR-62411 (… |
| 1.3.6.1.4.1.2011.5.30.1.3.1.2.1.3 | ColumnhwTdmE1ConfIdleCode | read-write | current | This object selects the code transmitted to fill idle (unused) time slots in the main link frame. Valid range: (0 - FF HEX). |
| 1.3.6.1.4.1.2011.5.30.1.3.1.2.1.4 | ColumnhwTdmE1ConfCrc4 | read-write | current | This parameter indicates whether the CRC-4 is set to the local and remote device. Options: 1. yes(1) - Indicates that set CRC-4. 2. no(2) - Indicates that no s… |
| 1.3.6.1.4.1.2011.5.30.1.3.1.3 | TablehwTdmDTEConfTable | not-accessible | current | This table describes the information about a TDM Modem DTE port configuration. This information describe the DTE port index, local analog loop-back switch, rem… |
| 1.3.6.1.4.1.2011.5.30.1.3.1.3.1 | RowhwTdmDTEConfEntry | not-accessible | current | This table describes the information about a TDM Modem DTE port configuration. This information describe the DTE port index, local analog loop-back switch, rem… |
| 1.3.6.1.4.1.2011.5.30.1.3.1.3.1.1 | ColumnhwTdmDTEConfLlbEnable | read-write | current | Enable/Disable local Analog Loop-Back on this modem, externally initiated. Options: 1. enable(1) - Indicates that enable the function. 2. disable(2) - Indicate… |
| 1.3.6.1.4.1.2011.5.30.1.3.1.3.1.2 | ColumnhwTdmDTEConfRlbEnable | read-write | current | Enable/Disable Remote Loop-Back on this modem, externally initiated. Options: 1. enable(1) - Indicates that enable the function. 2. disable(2) - Indicates that… |
| 1.3.6.1.4.1.2011.5.30.1.3.1.3.1.3 | ColumnhwTdmDTEConfIrRate | read-write | current | This object indicates the DTE port rate.for mux device.When modem is two_wire model,its max supported value is 2048Kbps. Options: 1, r64Kbps(1) - Indicates the… |
| 1.3.6.1.4.1.2011.5.30.1.3.2 | NodehwTdmPortStatObjects | |||
| 1.3.6.1.4.1.2011.5.30.1.3.2.1 | TablehwTdmShdslCurrentStatTable | not-accessible | current | This table describes the reference information about a TDM Modem SHDSL port statistics including 15 minute and 1 day interval. This information describe total … |
| 1.3.6.1.4.1.2011.5.30.1.3.2.1.1 | RowhwTdmShdslCurrentStatEntry | not-accessible | current | This table describes the reference information about a TDM Modem SHDSL port statistics including 15 minute and 1 day interval. This information describe total … |
| 1.3.6.1.4.1.2011.5.30.1.3.2.1.1.1 | ColumnhwTdmShdslLineIndex | not-accessible | current | This value indicates the SHDSL line port index. Options: 1. lineA(1) - Indicates the SHDSL line port index is lineA. 2. lineB(2) - Indicates the SHDSL line por… |
| 1.3.6.1.4.1.2011.5.30.1.3.2.1.1.2 | ColumnhwTdmShdslCurrentTimeElapsed | read-only | current | Total elapsed seconds in the current interval. |
| 1.3.6.1.4.1.2011.5.30.1.3.2.1.1.3 | ColumnhwTdmShdslCurrent15MinES | read-only | current | Count of Errored Seconds (ES) in the current 15-minute interval. |
| 1.3.6.1.4.1.2011.5.30.1.3.2.1.1.4 | ColumnhwTdmShdslCurrent15MinSES | read-only | current | Count of Severely Errored Seconds (SES) in the current 15-minute interval. when sync is off ,it may be 900 |
| 1.3.6.1.4.1.2011.5.30.1.3.2.1.1.5 | ColumnhwTdmShdslCurrent15MinCRCanomalies | read-only | current | Count of CRC anomalies in the current 15-minute interval. |
| 1.3.6.1.4.1.2011.5.30.1.3.2.1.1.6 | ColumnhwTdmShdslCurrent15MinLOSWS | read-only | current | Count of Loss of Sync Word (LOSW) Seconds in the current 15-minute interval. |
| 1.3.6.1.4.1.2011.5.30.1.3.2.1.1.7 | ColumnhwTdmShdslCurrent15MinUAS | read-only | current | Count of Unavailable Seconds (UAS) in the current 15-minute interval. when sync is off ,it may be 900 |
| 1.3.6.1.4.1.2011.5.30.1.3.2.1.1.8 | ColumnhwTdmShdslCurrent1DayES | read-only | current | Count of Errored Seconds (ES) in the current day interval. |
| 1.3.6.1.4.1.2011.5.30.1.3.2.1.1.9 | ColumnhwTdmShdslCurrent1DaySES | read-only | current | Count of Severely Errored Seconds (SES) in the current day interval. |
| 1.3.6.1.4.1.2011.5.30.1.3.2.1.1.10 | ColumnhwTdmShdslCurrent1DayCRCanomalies | read-only | current | Count of CRC anomalies in the current day interval. |
| 1.3.6.1.4.1.2011.5.30.1.3.2.1.1.11 | ColumnhwTdmShdslCurrent1DayLOSWS | read-only | current | Count of Loss of Sync Word (LOSW) Seconds in the current day interval. |
| 1.3.6.1.4.1.2011.5.30.1.3.2.1.1.12 | ColumnhwTdmShdslCurrent1DayUAS | read-only | current | Count of Unavailable Seconds (UAS) in the current day interval. |
| 1.3.6.1.4.1.2011.5.30.1.3.2.1.1.13 | ColumnhwTdmShdslCurrentSNRMargin | read-only | current | The current SNR margin for this endpoint as reported in a Status Response/SNR message. |
| 1.3.6.1.4.1.2011.5.30.1.3.2.1.1.14 | ColumnhwTdmShdslCurrentLoopAttenuation | read-only | current | The current loop attenuation for this endpoint as reported in a Network or Customer Side Performance Status message. |
| 1.3.6.1.4.1.2011.5.30.1.3.2.1.1.15 | ColumnhwTdmShdslCurrentTransPower | read-only | current | The current transmit power in tenth of dBm. |
| 1.3.6.1.4.1.2011.5.30.1.3.2.1.1.16 | ColumnhwTdmShdslCurrentPowerBO | read-only | current | The current transceiver actual power packoff from 0dB to 6dB. |
| 1.3.6.1.4.1.2011.5.30.1.3.2.2 | TablehwTdmShdslIntervalStatTable | not-accessible | current | This table describes the reference information about a TDM Modem SHDSL port statistics in 15 minute interval. This information describe the SHDSL port interval… |
| 1.3.6.1.4.1.2011.5.30.1.3.2.2.1 | RowhwTdmShdslIntervalStatEntry | not-accessible | current | This table describes the reference information about a TDM Modem SHDSL port statistics in 15 minute interval. This information describe the SHDSL port interval… |
| 1.3.6.1.4.1.2011.5.30.1.3.2.2.1.1 | ColumnhwTdmShdslIntervalIndex | not-accessible | current | This value indicates the interval SHDSL port statistics index in the remote modem. |
| 1.3.6.1.4.1.2011.5.30.1.3.2.2.1.2 | ColumnhwTdmShdslIntervalES | read-only | current | Count of Errored Seconds (ES) in 15-minute interval. |
| 1.3.6.1.4.1.2011.5.30.1.3.2.2.1.3 | ColumnhwTdmShdslIntervalSES | read-only | current | Count of Severely Errored Seconds (SES) in 15-minute interval. when sync is off ,it may be 900 |
| 1.3.6.1.4.1.2011.5.30.1.3.2.2.1.4 | ColumnhwTdmShdslIntervalCRCanomalies | read-only | current | Count of CRC anomalies in 15-minute interval. |
| 1.3.6.1.4.1.2011.5.30.1.3.2.2.1.5 | ColumnhwTdmShdslIntervalLOSWS | read-only | current | Count of Loss of Sync Word (LOSW) Seconds in 15-minute interval. |
| 1.3.6.1.4.1.2011.5.30.1.3.2.2.1.6 | ColumnhwTdmShdslIntervalUAS | read-only | current | Count of Unavailable Seconds (UAS) in 15-minute interval. when sync is off ,it may be 900 |
| 1.3.6.1.4.1.2011.5.30.1.3.2.3 | TablehwTdmShdslTotalStatTable | not-accessible | current | This table describes the reference information about a TDM Modem SHDSL port statistics in 1-day interval. This information describe the SHDSL port interval ind… |
| 1.3.6.1.4.1.2011.5.30.1.3.2.3.1 | RowhwTdmShdslTotalStatEntry | not-accessible | current | This table describes the reference information about a TDM Modem SHDSL port statistics in 1-day interval. This information describe the SHDSL port interval ind… |
| 1.3.6.1.4.1.2011.5.30.1.3.2.3.1.1 | ColumnhwTdmShdslTotalIndex | not-accessible | current | This value indicates the total SHDSL port statistics index in the remote modem. |
| 1.3.6.1.4.1.2011.5.30.1.3.2.3.1.2 | ColumnhwTdmShdslTotalES | read-only | current | Count of Errored Seconds (ES) in 1-day interval. |
| 1.3.6.1.4.1.2011.5.30.1.3.2.3.1.3 | ColumnhwTdmShdslTotalSES | read-only | current | Count of Severely Errored Seconds (SES) in 1-day interval. |
| 1.3.6.1.4.1.2011.5.30.1.3.2.3.1.4 | ColumnhwTdmShdslTotalCRCanomalies | read-only | current | Count of CRC anomalies in 1-day interval. |
| 1.3.6.1.4.1.2011.5.30.1.3.2.3.1.5 | ColumnhwTdmShdslTotalLOSWS | read-only | current | Count of Loss of Sync Word (LOSW) Seconds in 1-day interval. |
| 1.3.6.1.4.1.2011.5.30.1.3.2.3.1.6 | ColumnhwTdmShdslTotalUAS | read-only | current | Count of Unavailable Seconds (UAS) in 1-day interval. |
| 1.3.6.1.4.1.2011.5.30.1.3.2.4 | TablehwTdmE1CurrentStatTable | not-accessible | current | This table describes the reference information about a TDM Modem E1 port statistics in current 15 minute interval. This information describe the E1 port curren… |
| 1.3.6.1.4.1.2011.5.30.1.3.2.4.1 | RowhwTdmE1CurrentStatEntry | not-accessible | current | This table describes the reference information about a TDM Modem E1 port statistics in current 15 minute interval. This information describe the E1 port curren… |
| 1.3.6.1.4.1.2011.5.30.1.3.2.4.1.1 | ColumnhwTdmE1CurrentBpvLastMin | read-only | current | This object provides the number of BPV (BiPolar Violation) events detected during the last minute. |
| 1.3.6.1.4.1.2011.5.30.1.3.2.4.1.2 | ColumnhwTdmE1CurrentBpvMax | read-only | current | This object provides the maximal number of BPV (BiPolar Violation) events (per minute) detected during the worst minute. |
| 1.3.6.1.4.1.2011.5.30.1.3.2.4.1.3 | ColumnhwTdmE1CurrentCRCErrorEvents | read-only | current | Counts the number of CRC error events, encountered in the current 15 minute interval. |
| 1.3.6.1.4.1.2011.5.30.1.3.2.4.1.4 | ColumnhwTdmE1CurrentCRCAvgError | read-only | current | Counts the average number of CRC error events per second. The average is updated every second. |
| 1.3.6.1.4.1.2011.5.30.1.3.2.4.1.5 | ColumnhwTdmE1CurrentESs | read-only | current | Counts the number of errored seconds measured encountered in the current 15 minute interval. |
| 1.3.6.1.4.1.2011.5.30.1.3.2.4.1.6 | ColumnhwTdmE1CurrentUASs | read-only | current | Counts the number of unavailable seconds measured encountered in the current 15 minute interval. |
| 1.3.6.1.4.1.2011.5.30.1.3.2.4.1.7 | ColumnhwTdmE1CurrentSESs | read-only | current | Counts the number of severely errored seconds measured encountered in the current 15 minute interval. |
| 1.3.6.1.4.1.2011.5.30.1.3.2.4.1.8 | ColumnhwTdmE1CurrentBESs | read-only | current | Counts the number of bursty errored seconds measured encountered in the current 15 minute interval. |
| 1.3.6.1.4.1.2011.5.30.1.3.2.4.1.9 | ColumnhwTdmE1CurrentLOFC | read-only | current | Counts the number of loss of frame events measured encountered in the current 15 minute interval. |
| 1.3.6.1.4.1.2011.5.30.1.3.2.4.1.10 | ColumnhwTdmE1CurrentCSSs | read-only | current | Counts the number of controlled slip seconds measured encountered in the current 15 minute interval. |
| 1.3.6.1.4.1.2011.5.30.1.3.2.4.1.11 | ColumnhwTdmE1CurrentDMs | read-only | current | Counts the number of degraded minutes measured encountered in the current 15 minute interval. |
| 1.3.6.1.4.1.2011.5.30.1.3.2.4.1.12 | ColumnhwTdmE1TimeElapsed | read-only | current | The number of seconds that have elapsed since the beginning of the near end current error- measurement period. If, for some reason, such as an adjustment in th… |
| 1.3.6.1.4.1.2011.5.30.1.3.2.5 | TablehwTdmE1IntervalStatTable | not-accessible | current | This table describes the reference information about a TDM Modem E1 port statistics in 15 minute interval. This information describe the E1 port interval index… |
| 1.3.6.1.4.1.2011.5.30.1.3.2.5.1 | RowhwTdmE1IntervalStatEntry | not-accessible | current | This table describes the reference information about a TDM Modem E1 port statistics in 15 minute interval. This information describe the E1 port interval index… |
| 1.3.6.1.4.1.2011.5.30.1.3.2.5.1.1 | ColumnhwTdmE1IntervalIndex | not-accessible | current | This value indicates the interval E1 port statistics index in the remote modem. |
| 1.3.6.1.4.1.2011.5.30.1.3.2.5.1.2 | ColumnhwTdmE1IntervalESs | read-only | current | Counts the number of errored seconds measured encountered in 15 minute interval. |
| 1.3.6.1.4.1.2011.5.30.1.3.2.5.1.3 | ColumnhwTdmE1IntervalUASs | read-only | current | Counts the number of unavailable seconds measured encountered in 15 minute interval. |
| 1.3.6.1.4.1.2011.5.30.1.3.2.5.1.4 | ColumnhwTdmE1IntervalSESs | read-only | current | Counts the number of severely errored seconds measured encountered in 15 minute interval. |
| 1.3.6.1.4.1.2011.5.30.1.3.2.5.1.5 | ColumnhwTdmE1IntervalBESs | read-only | current | Counts the number of bursty errored seconds measured encountered in 15 minute interval. |
| 1.3.6.1.4.1.2011.5.30.1.3.2.5.1.6 | ColumnhwTdmE1IntervalLOFC | read-only | current | Counts the number of loss of frame events measured encountered in 15 minute interval. |
| 1.3.6.1.4.1.2011.5.30.1.3.2.5.1.7 | ColumnhwTdmE1IntervalCSSs | read-only | current | Counts the number of controlled slip seconds measured encountered in 15 minute interval. |
| 1.3.6.1.4.1.2011.5.30.1.3.2.5.1.8 | ColumnhwTdmE1IntervalDMs | read-only | current | Counts the number of degraded minutes measured encountered in 15 minute interval. |
| 1.3.6.1.4.1.2011.5.30.1.3.2.5.1.9 | ColumnhwTdmE1TotalIntervalNum | read-only | current | This value indicates the total number of E1 port statistics in 15 minute interval in 24 hour statistics. |
| 1.3.6.1.4.1.2011.5.30.1.3.2.5.1.10 | ColumnhwTdmE1Interval1DayESs | read-only | current | The sum of Errored Seconds encountered by a E1 interface in the previous 24 hour interval. |
| 1.3.6.1.4.1.2011.5.30.1.3.2.5.1.11 | ColumnhwTdmE1Interval1DayUASs | read-only | current | The number of Unavailable Seconds encountered by a E1 interface in the previous 24 hour interval. |
| 1.3.6.1.4.1.2011.5.30.1.3.2.5.1.12 | ColumnhwTdmE1Interval1DaySESs | read-only | current | The number of Severely Errored Seconds encountered by a E1 interface in the previous 24 hour interval. |
| 1.3.6.1.4.1.2011.5.30.1.3.2.5.1.13 | ColumnhwTdmE1Interval1DayBESs | read-only | current | The number of Bursty Errored Seconds (BESs) encountered by a E1 interface in the previous 24 hour interval. |
| 1.3.6.1.4.1.2011.5.30.1.3.2.5.1.14 | ColumnhwTdmE1Interval1DayLOFC | read-only | current | The number of loss of frame events encountered by a E1 interface in the previous 24 hour interval. |
| 1.3.6.1.4.1.2011.5.30.1.3.2.5.1.15 | ColumnhwTdmE1Interval1DayCSSs | read-only | current | The number of Controlled Slip Seconds encountered by a E1 interface in the previous 24 hour interval. |
| 1.3.6.1.4.1.2011.5.30.1.3.2.5.1.16 | ColumnhwTdmE1Interval1DayDMs | read-only | current | The number of Degraded Minutes (DMs) encountered by a E1 interface in the previous 24 hour interval. |
| 1.3.6.1.4.1.2011.5.30.1.3.2.5.1.17 | ColumnhwTdmE1Interval1DayDEGMinute | read-only | current | The number of DEG Minutes encountered by a E1 interface in the previous 24 hour interval. |
| 1.3.6.1.4.1.2011.5.30.1.4 | NodehwTdmCommonConfiguration | |||
| 1.3.6.1.4.1.2011.5.30.1.4.1 | TablehwTdmAdtranScriptTable | not-accessible | current | This table describes the configuration about a TDM Modem to config TDM SHDSL terminal.The index of this table is ifIndex. |
| 1.3.6.1.4.1.2011.5.30.1.4.1.1 | RowhwTdmAdtranScriptEntry | not-accessible | current | This table describes the configuration about a TDM Modem to config TDM SHDSL terminal.The index of this entry is ifIndex. |
| 1.3.6.1.4.1.2011.5.30.1.4.1.1.1 | ColumnhwTdmAdtranScript | read-write | current | This object is used to config TDM SHDSL terminal, and it may include sereval commands. Each command ends with one or more '\n', and every '\n' means delay 1 se… |
| 1.3.6.1.4.1.2011.5.30.1.4.1.1.2 | ColumnhwTdmAdtranScriptLatestResult | read-only | current | The result of the lastest script configuration. Options: 1. idle(1) - Indicates that no configuration. 2. fail(2) - Indicates that last configuration failed. 3… |
| 1.3.6.1.4.1.2011.5.30.2 | NodehwTdmMIBConformance | |||
| 1.3.6.1.4.1.2011.5.30.2.1 | NodehwTdmMIBCompliances | |||
| 1.3.6.1.4.1.2011.5.30.2.1.1 | CompliancehwTdmMIBTftpCompliance | current | The compliance statement for TFTP download. | |
| 1.3.6.1.4.1.2011.5.30.2.2 | NodehwTdmMIBGroups | |||
| 1.3.6.1.4.1.2011.5.30.2.2.1 | GrouphwTdmMIBTftpGroup | current | A collection of objects providing for TFTP uploading and downloading. |