HUAWEI-VLL-STATISTIC-MIB
60 objects
The HUAWEI-VLL-STATISTIC-MIB contains objects to manage VLL's statistic.
Imported Objects
| HUAWEI-MIB | hwDatacomm |
| IF-MIB | InterfaceIndex |
| P-BRIDGE-MIB | EnabledStatus |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | Counter64 MODULE-IDENTITY OBJECT-TYPE TimeTicks Unsigned32 |
| SNMPv2-TC | DateAndTime TEXTUAL-CONVENTION |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2011.5.25.119 | NodehwL2Vpn | |||
| 1.3.6.1.4.1.2011.5.25.119.7 | IdentityhwL2VpnVllStatistic | The HUAWEI-VLL-STATISTIC-MIB contains objects to manage VLL's statistic. | ||
| 1.3.6.1.4.1.2011.5.25.119.7.1 | NodehwVllMIBObjects | |||
| 1.3.6.1.4.1.2011.5.25.119.7.1.1 | TablehwVllStatisticTable | not-accessible | current | This table contains the VLL's traffic statistic, based on the interface. |
| 1.3.6.1.4.1.2011.5.25.119.7.1.1.1 | RowhwVllStatisticEntry | not-accessible | current | Provides the information of the VLL's traffic statistic. |
| 1.3.6.1.4.1.2011.5.25.119.7.1.1.1.1 | ColumnhwVllStatisticIfIndex | not-accessible | current | This object indicates the interface index. |
| 1.3.6.1.4.1.2011.5.25.119.7.1.1.1.2 | ColumnhwVllStatisticPwType | not-accessible | current | This object indicates the type of PW. |
| 1.3.6.1.4.1.2011.5.25.119.7.1.1.1.3 | ColumnhwVllStatisticEnable | read-write | current | This object indicates the enable sign of VLL's traffic statistics, based on the interface. |
| 1.3.6.1.4.1.2011.5.25.119.7.1.1.1.4 | ColumnhwVllStatisticResetTraffic | read-write | current | reset the traffic statistic. |
| 1.3.6.1.4.1.2011.5.25.119.7.1.1.1.5 | ColumnhwVllStatisticResetTime | read-only | current | Last time of clean out. |
| 1.3.6.1.4.1.2011.5.25.119.7.1.1.1.6 | ColumnhwVllStatisticPackets | read-only | current | The packets sent on the PW. |
| 1.3.6.1.4.1.2011.5.25.119.7.1.1.1.7 | ColumnhwVllStatisticBytes | read-only | current | The bytes sent on the PW. |
| 1.3.6.1.4.1.2011.5.25.119.7.1.1.1.8 | ColumnhwVllStatisticPacketsRate | read-only | current | The packet rate sent on the PW. |
| 1.3.6.1.4.1.2011.5.25.119.7.1.1.1.9 | ColumnhwVllStatisticBytesRate | read-only | current | The byte rate sent on the PW. |
| 1.3.6.1.4.1.2011.5.25.119.7.1.1.1.10 | ColumnhwVllStatisticInputPackets | read-only | current | The number of packets received over the PW. |
| 1.3.6.1.4.1.2011.5.25.119.7.1.1.1.11 | ColumnhwVllStatisticInputBytes | read-only | current | The number of bytes received over the PW. |
| 1.3.6.1.4.1.2011.5.25.119.7.1.1.1.12 | ColumnhwVllStatisticInputPacketsRate | read-only | current | The rate of receiving packets over the PW. |
| 1.3.6.1.4.1.2011.5.25.119.7.1.1.1.13 | ColumnhwVllStatisticInputBytesRate | read-only | current | The rate of receiving bytes over the PW. |
| 1.3.6.1.4.1.2011.5.25.119.7.1.2 | TablehwVllQosStatisticTable | not-accessible | current | This table displays VLL QoS traffic statistics. |
| 1.3.6.1.4.1.2011.5.25.119.7.1.2.1 | RowhwVllQosStatisticEntry | not-accessible | current | Provides the information of the VLL's traffic statistic. |
| 1.3.6.1.4.1.2011.5.25.119.7.1.2.1.1 | ColumnhwVllQosStatisticIfIndex | not-accessible | current | This object indicates the interface index. |
| 1.3.6.1.4.1.2011.5.25.119.7.1.2.1.2 | ColumnhwVllQosStatisticPwType | not-accessible | current | This object indicates the type of PW. |
| 1.3.6.1.4.1.2011.5.25.119.7.1.2.1.3 | ColumnhwVllQosStatisticQueueId | not-accessible | current | This object indicates the queue's ID. The value must be be,af1,af2,af3,af4,ef,cs6,cs7. |
| 1.3.6.1.4.1.2011.5.25.119.7.1.2.1.4 | ColumnhwVllQosStatisticPassPacket | read-only | current | Number of passed packets, based on the interface. |
| 1.3.6.1.4.1.2011.5.25.119.7.1.2.1.5 | ColumnhwVllQosStatisticPassByte | read-only | current | Number of passed bytes, based on the interface. |
| 1.3.6.1.4.1.2011.5.25.119.7.1.2.1.6 | ColumnhwVllQosStatisticDiscardPacket | read-only | current | Number of discarded packets, based on the interface. |
| 1.3.6.1.4.1.2011.5.25.119.7.1.2.1.7 | ColumnhwVllQosStatisticDiscardByte | read-only | current | Number of discarded bytes, based on the interface. |
| 1.3.6.1.4.1.2011.5.25.119.7.1.2.1.8 | ColumnhwVllQosStatisticPassPacketRate | read-only | current | Rate of passed packets for the past 300 seconds, based on the interface. Unit: pps |
| 1.3.6.1.4.1.2011.5.25.119.7.1.2.1.9 | ColumnhwVllQosStatisticPassByteRate | read-only | current | Rate of passed bytes for the past 300 seconds, based on the interface. Unit: bps |
| 1.3.6.1.4.1.2011.5.25.119.7.1.2.1.10 | ColumnhwVllQosStatisticDiscardPacketRate | read-only | current | Rate of discarded packets for the past 300 seconds, based on the interface. Unit: pps |
| 1.3.6.1.4.1.2011.5.25.119.7.1.2.1.11 | ColumnhwVllQosStatisticDiscardByteRate | read-only | current | Rate of discarded bytes for the past 300 seconds, based on the interface. Unit: bps |
| 1.3.6.1.4.1.2011.5.25.119.7.1.3 | TablehwPWATMPerfCurrentTable | not-accessible | current | This table provides per ATM PW performance information. The contents of this table entry are reset to zero and gotten new information every 15 minutes. |
| 1.3.6.1.4.1.2011.5.25.119.7.1.3.1 | RowhwPWATMPerfCurrentEntry | not-accessible | current | An entry in this table is created by the agent for every ATM PW entry. |
| 1.3.6.1.4.1.2011.5.25.119.7.1.3.1.1 | ColumnhwPwATMIfIndex | not-accessible | current | This object indicates the interface index. |
| 1.3.6.1.4.1.2011.5.25.119.7.1.3.1.2 | ColumnhwPWATMPerfCurrentEnable | read-write | current | This object indicates the enable sign of ATM PW's performance, based on the interface. |
| 1.3.6.1.4.1.2011.5.25.119.7.1.3.1.3 | ColumnhwPWATMPerfCurrentMissingPkts | read-only | current | The value of this object identifies the number of lost packets. |
| 1.3.6.1.4.1.2011.5.25.119.7.1.3.1.4 | ColumnhwPWATMPerfCurrentPktsMisOrder | read-only | current | Number of packets detected out of order (via control word sequence numbers). |
| 1.3.6.1.4.1.2011.5.25.119.7.1.3.1.5 | ColumnhwPWATMPerfCurrentCellsXmit | read-only | current | Number of transmitted cells. |
| 1.3.6.1.4.1.2011.5.25.119.7.1.3.1.6 | ColumnhwPWATMPerfCurrentCellsReceived | read-only | current | Number of received cells. |
| 1.3.6.1.4.1.2011.5.25.119.7.1.3.1.7 | ColumnhwPWATMPerfCurrentUnknownCells | read-only | current | Number of cells received from the PSN with unknown VPI or VCI values. This object is relevant only in N:1 mode. |
| 1.3.6.1.4.1.2011.5.25.119.7.1.4 | TablehwPWTDMPerfCurrentTable | not-accessible | current | This table provides per TDM PW performance information. The contents of this table entry are reset to zero and gotten new information every 15 minutes. |
| 1.3.6.1.4.1.2011.5.25.119.7.1.4.1 | RowhwPWTDMPerfCurrentEntry | not-accessible | current | An entry in this table is created by the agent for every TDM PW entry. |
| 1.3.6.1.4.1.2011.5.25.119.7.1.4.1.1 | ColumnhwPWTDMIfIndex | not-accessible | current | Index of the interface (or the virtual interface) associated with the PW. |
| 1.3.6.1.4.1.2011.5.25.119.7.1.4.1.2 | ColumnhwPWTDMPerfCurrentEnable | read-write | current | This object indicates the enable sign of TDM PW's performance, based on the interface. |
| 1.3.6.1.4.1.2011.5.25.119.7.1.4.1.3 | ColumnhwPWTDMPerfCurrentMissingPkts | read-only | current | Number of missing packets (as detected via control word sequence number gaps). |
| 1.3.6.1.4.1.2011.5.25.119.7.1.4.1.4 | ColumnhwPWTDMPerfCurrentJtrBfrOverruns | read-only | current | Number of times the jitter buffer was overrun. |
| 1.3.6.1.4.1.2011.5.25.119.7.1.4.1.5 | ColumnhwPWTDMPerfCurrentJtrBfrUnderruns | read-only | current | Number of times a packet needed to be played out and the jitter buffer was empty. |
| 1.3.6.1.4.1.2011.5.25.119.7.1.4.1.6 | ColumnhwPWTDMPerfCurrentMisOrderDropped | read-only | current | Number of packets detected out of order (via control word sequence numbers) that could not be re-ordered or could not fit in the jitter buffer. |
| 1.3.6.1.4.1.2011.5.25.119.7.1.4.1.7 | ColumnhwPWTDMPerfCurrentMalformedPkt | read-only | current | Number of packets detected with unexpected size or bad headers' stack. |
| 1.3.6.1.4.1.2011.5.25.119.7.1.4.1.8 | ColumnhwPWTDMPerfCurrentESs | read-only | current | The value of this object identifies the accumulated number of seconds in which error bits exist. That is, the time during which the TDM-encapsulated PW drops p… |
| 1.3.6.1.4.1.2011.5.25.119.7.1.4.1.9 | ColumnhwPWTDMPerfCurrentSESs | read-only | current | The value of this object identifies the accumulated number of seconds in which severe error bits exist. |
| 1.3.6.1.4.1.2011.5.25.119.7.1.4.1.10 | ColumnhwPWTDMPerfCurrentUASs | read-only | current | The value of this object identifies the number of seconds in which the TDM-encapsulated PW is unavailable. If the number of severe error bits exist in the TDM-… |
| 1.3.6.1.4.1.2011.5.25.119.7.1.4.1.11 | ColumnhwPWTDMPerfCurrentStrayPkt | read-only | current | The number of misconnected packets during the check period |
| 1.3.6.1.4.1.2011.5.25.119.7.2 | NodehwVllMIBTraps | |||
| 1.3.6.1.4.1.2011.5.25.119.7.3 | NodehwVllMIBConformance | |||
| 1.3.6.1.4.1.2011.5.25.119.7.3.1 | NodehwVllMIBCompliances | |||
| 1.3.6.1.4.1.2011.5.25.119.7.3.1.1 | CompliancehwVllMIBCompliance | current | The compliance statement for systems supporting the HUAWEI-VLL-STATISTIC-MIB. | |
| 1.3.6.1.4.1.2011.5.25.119.7.3.2 | NodehwVllMIBGroups | |||
| 1.3.6.1.4.1.2011.5.25.119.7.3.2.1 | GrouphwVllStatisticGroup | current | The VLL's statistic group. | |
| 1.3.6.1.4.1.2011.5.25.119.7.3.2.2 | GrouphwVllQosStatisticGroup | current | The VLL's QoS statistic group. |