HUAWEI-VO-GENERAL-MIB
67 objects
No module-level DESCRIPTION found.
Imported Objects
| HUAWEI-3COM-OID-MIB | voice |
| SNMPv2-SMI | MODULE-IDENTITY OBJECT-TYPE |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2011.5.25.1.1 | IdentityhwVoiceGeneralMIB | |||
| 1.3.6.1.4.1.2011.5.25.1.1.1 | NodehwVoiceGeneralObjects | |||
| 1.3.6.1.4.1.2011.5.25.1.1.1.1 | NodehwVoiceGeneralGroup | |||
| 1.3.6.1.4.1.2011.5.25.1.1.1.1.1 | ScalarhwVoGeneralJitterLen | read-write | current | This object specifies the length of the Jitter buffer. The default value is 3. |
| 1.3.6.1.4.1.2011.5.25.1.1.1.1.2 | ScalarhwVoGeneralMatchPolicy | read-write | current | This object specifies match number policy of this gateway. The default value is short. |
| 1.3.6.1.4.1.2011.5.25.1.1.1.1.3 | ScalarhwVoGeneralSendPerformance | read-write | current | This object specifies the performance of sending voice data. The default value is normal. |
| 1.3.6.1.4.1.2011.5.25.1.1.1.1.4 | ScalarhwVoGeneralReceivePerformance | read-write | current | This object specifies the performance of receiving voice data. The default value is normal |
| 1.3.6.1.4.1.2011.5.25.1.1.1.1.5 | ScalarhwVoGeneralDataStatistics | read-write | current | Enable/disable data statistics |
| 1.3.6.1.4.1.2011.5.25.1.1.1.1.6 | ScalarhwVoGeneralPacketPrecedence | read-write | current | Set global Voip packet precedence |
| 1.3.6.1.4.1.2011.5.25.1.1.1.1.7 | ScalarhwVoGeneralDialTerminator | read-write | current | Set global Dial Terminator |
| 1.3.6.1.4.1.2011.5.25.1.1.1.1.8 | ScalarhwVoGeneralCallStart | read-write | current | Set the start mode of called over IP |
| 1.3.6.1.4.1.2011.5.25.1.1.1.1.9 | ScalarhwVoGeneralCalledTunnel | read-write | current | Enable/disable Called tunnel function |
| 1.3.6.1.4.1.2011.5.25.1.1.1.1.10 | ScalarhwVoGeneralSpecialServiceEnable | read-write | current | This object sepcifies whether special service number function is enable or disable. |
| 1.3.6.1.4.1.2011.5.25.1.1.1.1.11 | ScalarhwVoGeneralCallTransferSpecialServiceNumber | read-write | current | This object specifies the call-transfer special service number in talking. |
| 1.3.6.1.4.1.2011.5.25.1.1.1.1.12 | ScalarhwVoGeneralPeerSearchStop | read-write | current | This object specifies the maximum in searching entities. |
| 1.3.6.1.4.1.2011.5.25.1.1.1.1.13 | ScalarhwVoGeneralPeerSelectOrderRule | read-write | current | This object specifies the rule order applied in voice entity selection. 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 |
| 1.3.6.1.4.1.2011.5.25.1.1.1.1.14 | ScalarhwVoGeneralPeerSelectTypePriority | read-write | current | This object specifies the priority-ranked type of voice entity. 1ST 2DN 3RD 0 1 2 3 4 5 6 |
| 1.3.6.1.4.1.2011.5.25.1.1.1.2 | TablehwVoLtoPTable | not-accessible | current | The table contains the relation information of Voice logic channel and voice physical channel. |
| 1.3.6.1.4.1.2011.5.25.1.1.1.2.1 | RowhwVoLtoPEntry | not-accessible | current | The information regarding a single logic voice channel . |
| 1.3.6.1.4.1.2011.5.25.1.1.1.2.1.1 | ColumnhwVoLtoPChannel | read-only | current | The number of this logic voice channel . |
| 1.3.6.1.4.1.2011.5.25.1.1.1.2.1.2 | ColumnhwVoLtoPSlot | read-only | current | The physical slot number which this logic voice channel based on. |
| 1.3.6.1.4.1.2011.5.25.1.1.1.2.1.3 | ColumnhwVoLtoPPort | read-only | current | The physical port number which this logic voice channel based on. |
| 1.3.6.1.4.1.2011.5.25.1.1.1.2.1.4 | ColumnhwVoLtoPTimeSlot | read-only | current | The timeslots map this logic channel is using . -1 represent this channel cann't be used by voice. |
| 1.3.6.1.4.1.2011.5.25.1.1.1.2.1.5 | ColumnhwVoLtoPStatus | read-only | current | The current status of the physical voice channel. |
| 1.3.6.1.4.1.2011.5.25.1.1.1.2.1.6 | ColumnhwVoLtoPBoardType | read-only | current | The board type of the physical voice channel. |
| 1.3.6.1.4.1.2011.5.25.1.1.1.2.1.7 | ColumnhwVoLtoPPortNumber | read-only | current | The global port number of the logic voice channel. -1 represent this channel cann't be used by voice. |
| 1.3.6.1.4.1.2011.5.25.1.1.1.2.1.8 | ColumnhwVoLtoPGroupNumber | read-only | current | The global group number of the logic voice channel. . -1 represent this channel cann't be used by voice . |
| 1.3.6.1.4.1.2011.5.25.1.1.1.3 | TablehwVoDialExpansionTable | not-accessible | current | The table contains the information of the Dial Expansion Record . |
| 1.3.6.1.4.1.2011.5.25.1.1.1.3.1 | RowhwVoDialExpansionEntry | not-accessible | current | The information regarding a Dial Expansion Record. |
| 1.3.6.1.4.1.2011.5.25.1.1.1.3.1.1 | ColumnhwVoDialExpansionType | read-only | current | The call direction of the Dial Expansion. |
| 1.3.6.1.4.1.2011.5.25.1.1.1.3.1.2 | ColumnhwVoDialExpansionSource | read-only | current | This source telephone of the Dial Expansion. |
| 1.3.6.1.4.1.2011.5.25.1.1.1.3.1.3 | ColumnhwVoDialExpansionTarget | read-write | current | This target telephone of the Dial Expansion. |
| 1.3.6.1.4.1.2011.5.25.1.1.1.3.1.4 | ColumnhwVoDialExpansionRowStatus | read-write | current | This object is used to create a new row or modify or delete an existing row in this table. |
| 1.3.6.1.4.1.2011.5.25.1.1.1.4 | NodehwVoiceNumberSubstGroup | |||
| 1.3.6.1.4.1.2011.5.25.1.1.1.4.1 | TablehwVoNumSubstTable | not-accessible | current | The table is the number-substitute rule table. It contains the table index, dot match rule and the first rule tag that the rule is used firstly. |
| 1.3.6.1.4.1.2011.5.25.1.1.1.4.1.1 | RowhwVoNumSubstEntry | not-accessible | current | A number-substitute rule list. One entry per number-substite rule list. |
| 1.3.6.1.4.1.2011.5.25.1.1.1.4.1.1.1 | ColumnhwVoNumSubstIndex | read-only | current | The index uniquely identifies a number-substitute rule list. It is valid if its value is between 1 and 2147483647. |
| 1.3.6.1.4.1.2011.5.25.1.1.1.4.1.1.2 | ColumnhwVoNumSubstFirstRule | read-write | current | This object specifies the first rule to be used firstly. It is valid if its value is between 0 and 127. |
| 1.3.6.1.4.1.2011.5.25.1.1.1.4.1.1.3 | ColumnhwVoNumSubstDotMatchRule | read-write | current | This object specifies the dot wildcard match rule. end-only - only end of E.164 number (input format) left-right - match form left to right (input format) righ… |
| 1.3.6.1.4.1.2011.5.25.1.1.1.4.1.1.4 | ColumnhwVoNumSubstRowStatus | read-write | current | This object is used to create a new row or modify or delete an existing row in this table. |
| 1.3.6.1.4.1.2011.5.25.1.1.1.4.2 | TablehwVoNumSubstRuleTable | not-accessible | current | The table contains the number-substitute rule information that is used to create an rule row with an appropriate rule index. |
| 1.3.6.1.4.1.2011.5.25.1.1.1.4.2.1 | RowhwVoNumSubstRuleEntry | not-accessible | current | A single number-substitute rule. One entry per number-substitute rule. |
| 1.3.6.1.4.1.2011.5.25.1.1.1.4.2.1.1 | ColumnhwVoNumSubstRuleIndex | read-only | current | The index uniquely identifies a number-substitute rule. It is valid if its value is between 0 and 127. |
| 1.3.6.1.4.1.2011.5.25.1.1.1.4.2.1.2 | ColumnhwVoNumSubstRuleInputFormat | read-write | current | This object specifies the input match format that must be of the form ^(\^)!(\+)!([0-9ABCD.*%!#]+)(\$)!$. |
| 1.3.6.1.4.1.2011.5.25.1.1.1.4.2.1.3 | ColumnhwVoNumSubstRuleOutputFormat | read-write | current | This object specifies the output format that must be of the form ^[0-9#.]+$. |
| 1.3.6.1.4.1.2011.5.25.1.1.1.4.2.1.4 | ColumnhwVoNumSubstRuleRowStatus | read-write | current | This object is used to create a new row or modify or delete an existing row in this table. |
| 1.3.6.1.4.1.2011.5.25.1.1.1.5 | TablehwVoMaxCallTable | not-accessible | current | The table stores The table stores the maximum number of allowed connections for a set of voice entities. |
| 1.3.6.1.4.1.2011.5.25.1.1.1.5.1 | RowhwVoMaxCallEntry | not-accessible | current | A single value of maximum call connections. One entry per maximum call connections. |
| 1.3.6.1.4.1.2011.5.25.1.1.1.5.1.1 | ColumnhwVoMaxCallTableIndex | read-only | current | The index uniquely identifies a single maximum call value. It is valid if its value is between 1 and 2147483647. |
| 1.3.6.1.4.1.2011.5.25.1.1.1.5.1.2 | ColumnhwVoMaxCallValue | read-write | current | This object specifies a single maximum call value. It is valid if its value is between 0 and 120. |
| 1.3.6.1.4.1.2011.5.25.1.1.1.5.1.3 | ColumnhwVoMaxCallTableRowStatus | read-write | current | This object is used to create a new row or modify or delete an existing row in this table. |
| 1.3.6.1.4.1.2011.5.25.1.1.1.6 | TablehwVoIncomingCallingNumSubstTable | not-accessible | current | The table stores the number-substitute rule list tag that these number-substitute rule list will be used for incoming-call caller number.The table can hold max… |
| 1.3.6.1.4.1.2011.5.25.1.1.1.6.1 | RowhwVoIncomingCallingNumSubstEntry | not-accessible | current | A number-substitute rule list tag. One entry per number-substite rule list tag. |
| 1.3.6.1.4.1.2011.5.25.1.1.1.6.1.1 | ColumnhwVoIncomingCallingNumSubstIndex | read-only | current | This object specifies a number-substitute rule that apply caller number for incoming call. It is valid if its value is between 1 and 2147483647. |
| 1.3.6.1.4.1.2011.5.25.1.1.1.6.1.2 | ColumnhwVoIncomingCallingNumSubstRowStatus | read-write | current | This object is used to create a new row or modify or delete an existing row in this table. |
| 1.3.6.1.4.1.2011.5.25.1.1.1.7 | TablehwVoIncomingCalledNumSubstTable | not-accessible | current | The table stores the number-substitute rule list tag that these number-substitute rule list will be used for incoming-call caller number.The table can hold max… |
| 1.3.6.1.4.1.2011.5.25.1.1.1.7.1 | RowhwVoIncomingCalledNumSubstEntry | not-accessible | current | A number-substitute rule list tag. One entry per number-substite rule list tag. |
| 1.3.6.1.4.1.2011.5.25.1.1.1.7.1.1 | ColumnhwVoIncomingCalledNumSubstIndex | read-only | current | This object specifies a number-substitute rule that apply caller number for incoming call. It is valid if its value is between 1 and 2147483647. |
| 1.3.6.1.4.1.2011.5.25.1.1.1.7.1.2 | ColumnhwVoIncomingCalledNumSubstRowStatus | read-write | current | This object is used to create a new row or modify or delete an existing row in this table. |
| 1.3.6.1.4.1.2011.5.25.1.1.1.8 | TablehwVoOutgoingCallingNumSubstTable | not-accessible | current | The table stores the number-substitute rule list tag that these number-substitute rule list will be used for incoming-call caller number.The table can hold max… |
| 1.3.6.1.4.1.2011.5.25.1.1.1.8.1 | RowhwVoOutgoingCallingNumSubstEntry | not-accessible | current | A number-substitute rule list tag. One entry per number-substite rule list tag. |
| 1.3.6.1.4.1.2011.5.25.1.1.1.8.1.1 | ColumnhwVoOutgoingCallingNumSubstIndex | read-only | current | This object specifies a number-substitute rule that apply caller number for incoming call. It is valid if its value is between 1 and 2147483647. |
| 1.3.6.1.4.1.2011.5.25.1.1.1.8.1.2 | ColumnhwVoOutgoingCallingNumSubstRowStatus | read-write | current | This object is used to create a new row or modify or delete an existing row in this table. |
| 1.3.6.1.4.1.2011.5.25.1.1.1.9 | TablehwVoOutgoingCalledNumSubstTable | not-accessible | current | The table stores the number-substitute rule list tag that these number-substitute rule list will be used for incoming-call caller number.The table can hold max… |
| 1.3.6.1.4.1.2011.5.25.1.1.1.9.1 | RowhwVoOutgoingCalledNumSubstEntry | not-accessible | current | A number-substitute rule list tag. One entry per number-substite rule list tag. |
| 1.3.6.1.4.1.2011.5.25.1.1.1.9.1.1 | ColumnhwVoOutgoingCalledNumSubstIndex | read-only | current | This object specifies a number-substitute rule that apply caller number for incoming call. It is valid if its value is between 1 and 2147483647. |
| 1.3.6.1.4.1.2011.5.25.1.1.1.9.1.2 | ColumnhwVoOutgoingCalledNumSubstRowStatus | read-write | current | This object is used to create a new row or modify or delete an existing row in this table. |