HUAWEI-VOIP-MGCP-MIB
121 objects
This MIB module defines MIB objects which provides MGCP management.
Imported Objects
| HUAWEI-MIB | huaweiUtility |
| SNMPv2-CONF | MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-SMI | Counter32 Integer32 IpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE private TimeTicks Unsigned32 |
| SNMPv2-TC | DisplayString RowStatus TEXTUAL-CONVENTION |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2011.6.36 | IdentityhwVoip | This MIB module defines MIB objects which provides MGCP management. | ||
| 1.3.6.1.4.1.2011.6.36.1 | NodehwIASVoipObjects | |||
| 1.3.6.1.4.1.2011.6.36.1.15 | TablehwMgcpParaTable | not-accessible | current | This table is used to set the MGCP dynamic parameters. The index of this table is hwMgcpParaMgId. |
| 1.3.6.1.4.1.2011.6.36.1.15.1 | RowhwMgcpParaEntry | not-accessible | current | This table is used to set the MGCP dynamic parameters. The index of this entry is hwMgcpParaMgId. |
| 1.3.6.1.4.1.2011.6.36.1.15.1.1 | ColumnhwMgcpParaMgId | not-accessible | current | Indicates the MG ID. |
| 1.3.6.1.4.1.2011.6.36.1.15.1.2 | ColumnhwMgcpParaRetranIntervalTimer | read-write | current | Indicates the maximum re-transmission interval of MGCP messages. |
| 1.3.6.1.4.1.2011.6.36.1.15.1.3 | ColumnhwMgcpParaMaxRetranTimes | read-write | current | Indicates the maximum re-transmission times of MGCP messages. |
| 1.3.6.1.4.1.2011.6.36.1.15.1.4 | ColumnhwMgcpParaProvRspDelay | read-write | current | Indicates the delay of the MGCP stack timer for receiving the provisional responses. |
| 1.3.6.1.4.1.2011.6.36.1.15.1.5 | ColumnhwMgcpParaAtMostOnceTimer | read-write | current | Indicates the length of the At-most-once timer of the MGCP stack. |
| 1.3.6.1.4.1.2011.6.36.1.15.1.6 | ColumnhwMgcpParaEnbProyRsp | read-write | current | Indicates whether the MGCP stack supports transmitting provisional responses. Options: 1. no(1) - indicates that the MGCP stack not supports transmitting provi… |
| 1.3.6.1.4.1.2011.6.36.1.15.1.7 | ColumnhwMgcpParaEnbSdpTransParent | read-write | current | Indicates whether the MGCP stack supports partial transparent transmission of the Session Description Protocol (SDP). Options: 1. no(1) - indicates that the MG… |
| 1.3.6.1.4.1.2011.6.36.1.37 | TablehwMgcpMedGwyConfigTable | not-accessible | current | This table is used to config the MGCP media gateway. The index of this table is hwMgcpMedGwyId. |
| 1.3.6.1.4.1.2011.6.36.1.37.1 | RowhwMgcpMedGwyConfigEntry | not-accessible | current | This table is used to config the MGCP media gateway. The index of this entry is hwMgcpMedGwyId. |
| 1.3.6.1.4.1.2011.6.36.1.37.1.1 | ColumnhwMgcpMedGwyId | accessible-for-notify | current | Media Gateway ID |
| 1.3.6.1.4.1.2011.6.36.1.37.1.2 | ColumnhwMgcpMedGwyDomainName | read-write | current | Domain name Parameter 0: clears the value of the parameter |
| 1.3.6.1.4.1.2011.6.36.1.37.1.3 | ColumnhwMgcpMedGwyDesc | read-write | current | Indicates the interface description. |
| 1.3.6.1.4.1.2011.6.36.1.37.1.4 | ColumnhwMgcpMedGwyIPAddress | read-write | current | Indicates the IP address that the Media Gateway Controller will use to communicate with the Media Gateway. |
| 1.3.6.1.4.1.2011.6.36.1.37.1.5 | ColumnhwMgcpMedGwyUDPPort | read-write | current | Indicates the UDP port that the Media Gateway Controller will use to communicate with the Media Gateway. The value 65535 is returned if the entry is invalid. T… |
| 1.3.6.1.4.1.2011.6.36.1.37.1.6 | ColumnhwMgcpMedGwyCodeType | read-only | current | Indicates the coding type. Options: 1.txt(1)-indicates that the coding type is text |
| 1.3.6.1.4.1.2011.6.36.1.37.1.7 | ColumnhwMgcpMedGwyTransMode | read-only | current | Indicates the transmission mode. Options: 1.udp(2)-indicates that the transmission mode is udp |
| 1.3.6.1.4.1.2011.6.36.1.37.1.8 | ColumnhwMgcpMedGwyRegisterKey | read-write | current | Indicates the key that is registered with the MGC, and the length of valid key input is from 8 to 32. The key cannot be modified, read, or written by the opera… |
| 1.3.6.1.4.1.2011.6.36.1.37.1.9 | ColumnhwMgcpMedGwyOperKey | read-only | current | Indicates the key for operating the MG. The hwMgcpMedGwyOperKey cannot be read or written. The functions of this key are as follows: 1) The hwMgcpMedGwyRegiste… |
| 1.3.6.1.4.1.2011.6.36.1.37.1.10 | ColumnhwMgcpMedGwyOperKeyNew | read-write | current | Indicates the new operation key, and the length of valid key input is from 8 to 32. The hwMgcpMedGwyOperKeyNew is a temporary variable, and cannot be read. If … |
| 1.3.6.1.4.1.2011.6.36.1.37.1.11 | ColumnhwMgcpMedGwyAdminStatus | read-write | current | Indicates the administrative status for this media gateway control group. Options: 1.up(1)-indicates that the administrative status for this media gateway cont… |
| 1.3.6.1.4.1.2011.6.36.1.37.1.12 | ColumnhwMgcpMedGwyOperStatus | read-only | current | Indicates the current operational status of the signaling link. Options: 1.up(1)-indicates that the current operational status of the signaling link is up 2.do… |
| 1.3.6.1.4.1.2011.6.36.1.37.1.13 | ColumnhwMgcpMedGwyRowStatus | read-write | current | This is used to create new rows in this table, Modify existing rows, and to delete existing rows. |
| 1.3.6.1.4.1.2011.6.36.1.37.1.14 | ColumnhwMgcpMedGwyLastChange | read-only | current | Indicates the value of sysUpTime at the time the associated link entered its current operational status. If the current status was entered prior to the last re… |
| 1.3.6.1.4.1.2011.6.36.1.37.1.15 | ColumnhwMgcpMedGwyAuthMode | read-write | current | Indicates the authentication mode. Options: 1.hwmode(1)-indicates that the authentication mode is huawei mode 2.gbmode(2)-indicates that the authentication mod… |
| 1.3.6.1.4.1.2011.6.36.1.37.1.16 | ColumnhwMgcpMedGwyAuthInitialKey | read-write | current | Indicates the authentication initial key, and the length of valid key input is from 1 to 16. The length is 0 when the value of hwMgcpMedGwyAuthMode is hwmode(1… |
| 1.3.6.1.4.1.2011.6.36.1.37.1.17 | ColumnhwMgcpMedGwyAuthMgId | read-write | current | Indicates the authentication MG ID, and the length input is from 1 to 16. The length is 0 when the value of hwMgcpMedGwyAuthMode is hwmode(1). Default: AG |
| 1.3.6.1.4.1.2011.6.36.1.37.1.18 | ColumnhwMgcpMedGwyAuthKey | read-write | current | Indicates the authentication initial key, and the length input is from 1 to 16. The length is 0 when the value of hwMgcpMedGwyAuthMode is hwmode(2). Default: 0… |
| 1.3.6.1.4.1.2011.6.36.1.37.1.19 | ColumnhwMgcpMedGwy2833Encrypt | read-write | current | Indicates the 2833 encryption key and the length of valid key input is from 1 to 16. The size 0 means the parameter is not configured. |
| 1.3.6.1.4.1.2011.6.36.1.37.1.20 | ColumnhwMgcpMedGwyCfgHeartBeatTimer | read-write | current | Indicates the configured timer of the heartbeat (s). |
| 1.3.6.1.4.1.2011.6.36.1.37.1.21 | ColumnhwMgcpMedGwyIPAddrDhcpClientIndex | read-write | current | Dhcp Signal vlan id. The valid value is 1..4093,if the value is -1, the static signal ip will be used. |
| 1.3.6.1.4.1.2011.6.36.1.37.1.22 | ColumnhwMgcpMedGwyDynAddrName | read-write | current | Dynamic media gateway IP name. |
| 1.3.6.1.4.1.2011.6.36.1.37.1.23 | ColumnhwMgcpMedGwyCurDynAddrName | read-only | current | Current working dynamic media gateway IP name. |
| 1.3.6.1.4.1.2011.6.36.1.37.1.24 | ColumnhwMgcpMedGwyCurIPAddress | read-only | current | Indicates the IP address that the Media Gateway current use to communicate with the Media Gateway Controller. |
| 1.3.6.1.4.1.2011.6.36.1.38 | TablehwMgcpMedGwyCtrlTable | not-accessible | current | This table is used to config the MGCP media gateway control parameters. The indexes of this table are hwMgcpMedGwyCtrlGatewayId and hwMgcpMedGwyCtrlIdx. |
| 1.3.6.1.4.1.2011.6.36.1.38.1 | RowhwMgcpMedGwyCtrlEntry | not-accessible | current | This table is used to config the MGCP media gateway control parameters. The indexes of this entry are hwMgcpMedGwyCtrlGatewayId and hwMgcpMedGwyCtrlIdx. |
| 1.3.6.1.4.1.2011.6.36.1.38.1.1 | ColumnhwMgcpMedGwyCtrlGatewayId | not-accessible | current | Indicates the MG ID. |
| 1.3.6.1.4.1.2011.6.36.1.38.1.2 | ColumnhwMgcpMedGwyCtrlIdx | not-accessible | current | Indicates the MGC index. |
| 1.3.6.1.4.1.2011.6.36.1.38.1.3 | ColumnhwMgcpMedGwyCtrlIPAddress | read-write | current | Indicates the IP address of the Media Gateway Controller. The value 255.255.255.255 is returned if the entry is invalid. |
| 1.3.6.1.4.1.2011.6.36.1.38.1.4 | ColumnhwMgcpMedGwyCtrlDnsName | read-write | current | Indicates the DNS name of the MGC. - means clears the value of the parameter. |
| 1.3.6.1.4.1.2011.6.36.1.38.1.5 | ColumnhwMgcpMedGwyCtrlDnsIp | read-only | current | Indicates the IP address that is obtained through the MGC domain name. DEFVAL { false } |
| 1.3.6.1.4.1.2011.6.36.1.38.1.6 | ColumnhwMgcpMedGwyCtrlPort | read-write | current | Indicates the UDP port of the Media Gateway Controller. The value 65535 is returned if the entry is invalid. |
| 1.3.6.1.4.1.2011.6.36.1.38.1.7 | ColumnhwMgcpMedGwyCtrlAdminStatus | read-write | current | Indicates to set the MGC as the active MGC. Options: 1. active(1) -Indicates to set the MGC as the active MGC |
| 1.3.6.1.4.1.2011.6.36.1.38.1.8 | ColumnhwMgcpMedGwyCtrlOperStatus | read-only | current | Indicates the status of the Media Gateway Controller (and/or) its transportLink. Options: 1. up(1) -indicates that the status of the Media Gateway Controller (… |
| 1.3.6.1.4.1.2011.6.36.1.38.1.9 | ColumnhwMgcpMedGwyCtrlRowStatus | read-write | current | Indicates the row status. |
| 1.3.6.1.4.1.2011.6.36.1.38.1.10 | ColumnhwMgcpMedGwyCtrlLastChange | read-only | current | Indicates the value of sysUpTime at the time the associated link entered its current operational status. If the current status was entered prior to the last re… |
| 1.3.6.1.4.1.2011.6.36.1.39 | TablehwMgcpDigitmapTable | not-accessible | current | This table is used to set digitmap. The index of this table is hwMgcpDigitmapMgId. |
| 1.3.6.1.4.1.2011.6.36.1.39.1 | RowhwMgcpDigitmapEntry | not-accessible | current | This table is used to set digitmap. The index of this entry is hwMgcpDigitmapMgId. |
| 1.3.6.1.4.1.2011.6.36.1.39.1.1 | ColumnhwMgcpDigitmapMgId | not-accessible | current | Indicates the MG interface ID. |
| 1.3.6.1.4.1.2011.6.36.1.39.1.2 | ColumnhwMgcpDigitmapDualdial | read-write | current | Indicates the automatic re-dial digitmap. |
| 1.3.6.1.4.1.2011.6.36.1.39.1.3 | ColumnhwMgcpDigitmapOverLoadUrgent | read-write | current | Indicates the overload control digitmap. |
| 1.3.6.1.4.1.2011.6.36.1.40 | TablehwMgcpMgSoftParameterTable | not-accessible | current | This table is used to set the software parameters of MGCP media gateway. The index of this table is hwMgcpMgInterfaceIndex. |
| 1.3.6.1.4.1.2011.6.36.1.40.1 | RowhwMgcpMgSoftParameterEntry | not-accessible | current | This table is used to set the software parameters of MGCP media gateway. The index of this entry is hwMgcpMgInterfaceIndex. |
| 1.3.6.1.4.1.2011.6.36.1.40.1.1 | ColumnhwMgcpMgInterfaceIndex | not-accessible | current | Indicates the MG interface index. |
| 1.3.6.1.4.1.2011.6.36.1.40.1.2 | ColumnhwMgcpMgSoftParameter0 | read-write | deprecated | Parameter name index 0. Indicates whether the terminal ID of the MG interface is layered. Options: 1. yes(1) -indicates that the terminal ID of the MG interfac… |
| 1.3.6.1.4.1.2011.6.36.1.40.1.3 | ColumnhwMgcpMgSoftParameter1 | read-write | current | Parameter name index 1. It indicates whether the ongoing calls are maintained after MG is disconnected from MGC. Options: 1. yes(1) -indicates that the ongoing… |
| 1.3.6.1.4.1.2011.6.36.1.40.1.4 | ColumnhwMgcpMgSoftParameter2 | read-write | current | Parameter name index 2. It indicates whether the MG interface supports dual homing. Options: 1. yes(1) -indicates that the MG interface supports dual homing 2.… |
| 1.3.6.1.4.1.2011.6.36.1.40.1.5 | ColumnhwMgcpMgSoftParameter3 | read-write | current | Parameter name index 3. It indicates whether the heartbeat message is disabled between MG and MGC. Options: 1. yes(1) -indicates that the heartbeat message is … |
| 1.3.6.1.4.1.2011.6.36.1.40.1.6 | ColumnhwMgcpMgSoftParameter4 | read-write | current | Parameter name index 4. It indicates whether the wildcard is used in registration. Options: 1. yes(1) -indicates that the wildcard is used in registration 2. n… |
| 1.3.6.1.4.1.2011.6.36.1.40.1.7 | ColumnhwMgcpMgSoftParameter5 | read-write | current | Parameter name index 5. It indicates the MGC type. The value range is 1-9. Options: 1. SOFTSWITCH 2. ZTE 3. NORTEL 4. CISCO 5. SIEMENS 6. SONUS 7. ETG 8. SHANG… |
| 1.3.6.1.4.1.2011.6.36.1.40.1.8 | ColumnhwMgcpMgSoftParameter6 | read-write | current | Parameter name index 6. It indicates the maximum threshold of not responding to the transmitted heartbeat message. Default: 3 |
| 1.3.6.1.4.1.2011.6.36.1.40.1.9 | ColumnhwMgcpMgSoftParameter7 | read-write | current | Parameter name index 7. It indicates whether to support the report that has the MG as the endpoint name. Options: 1. yes(1) -indicates support the report that … |
| 1.3.6.1.4.1.2011.6.36.1.40.1.10 | ColumnhwMgcpMgSoftParameter8 | read-write | deprecated | Parameter name index 8. It indicates whether the port fault and auto-block is reported to the MGC. Options: 1. yes(1) -indicates that the port fault and auto-b… |
| 1.3.6.1.4.1.2011.6.36.1.40.1.11 | ColumnhwMgcpMgSoftParameter9 | read-write | deprecated | Parameter name index 9. It is reserved in the system. Options: 1. yes(1) -yes 2. no(2) -no Default: yes(1) |
| 1.3.6.1.4.1.2011.6.36.1.40.1.12 | ColumnhwMgcpMgSoftParameter10 | read-write | current | Parameter name index 10. It indicates the point-to-point fault report flag. Options: 1. yes(1) -indicates that the point-to-point fault is reported 2. no(2) -i… |
| 1.3.6.1.4.1.2011.6.36.1.40.1.13 | ColumnhwMgcpMgSoftParameter11 | read-write | current | Parameter name index 11. It indicates the point-to-multipoint fault report flag. Options: 1. yes(1) -indicates that the point-to-multipoint fault is reported 2… |
| 1.3.6.1.4.1.2011.6.36.1.40.1.14 | ColumnhwMgcpMgSoftParameter12 | read-write | current | Parameter name index 12. It indicates the local block tone type. Options: 1. busyTone(1) -indicates that the local block tone type is busyTone 2. congestionTon… |
| 1.3.6.1.4.1.2011.6.36.1.40.1.15 | ColumnhwMgcpMgSoftParameter13 | read-write | current | Parameter name index 13. It indicates the remote block tone type. Options: 1. busyTone(1) -indicates that the remote block tone type is busyTone 2. congestionT… |
| 1.3.6.1.4.1.2011.6.36.1.40.1.16 | ColumnhwMgcpMgSoftParameter14 | read-write | current | Parameter name index 14. It indicates the RTP source port filtering switch. Options: 1. filter(1) -indicates that the RTP source port is filter 2. notFilter(2)… |
| 1.3.6.1.4.1.2011.6.36.1.40.1.17 | ColumnhwMgcpMgSoftParameter15 | read-write | current | Parameter name index 15. It indicates the length of howl tone<1,65535>. Default:60 Unit: second |
| 1.3.6.1.4.1.2011.6.36.1.40.1.18 | ColumnhwMgcpMgSoftParameter16 | read-write | current | Parameter name index 16. Indicates whether the timer symbol (T) follows the number string reported by the signaling. Options: 1. yes(1) -indicates that the tim… |
| 1.3.6.1.4.1.2011.6.36.1.40.1.19 | ColumnhwMgcpMgSoftParameter17 | read-write | current | Parameter name index 17. It indicates the duration of the timer for preventing the repeated switching between the data service and voice service after auto-swi… |
| 1.3.6.1.4.1.2011.6.36.1.40.1.20 | ColumnhwMgcpMgSoftParameter18 | read-write | current | Parameter name index 18. Indicates whether to actively switch back to the voice service after data transparent transmission is complete. Options: 1. yes(1) -in… |
| 1.3.6.1.4.1.2011.6.36.1.41 | TablehwMgcpDmmParaTable | not-accessible | current | This table is used to set the digitmap parameters. The index of this table is hwMgcpDmmParaMgId. |
| 1.3.6.1.4.1.2011.6.36.1.41.1 | RowhwMgcpDmmParaEntry | not-accessible | current | This table is used to set the digitmap parameters. The index of this entry is hwMgcpDmmParaMgId. |
| 1.3.6.1.4.1.2011.6.36.1.41.1.1 | ColumnhwMgcpDmmParaMgId | not-accessible | current | Indicates the MG ID. |
| 1.3.6.1.4.1.2011.6.36.1.41.1.2 | ColumnhwMgcpDmmParaMgcpTTimer | read-write | current | Indicates the length of the DMM MGCP T timer. |
| 1.3.6.1.4.1.2011.6.36.1.42 | TablehwMgcpTIDConfigTable | not-accessible | current | This table is used to config MGCP terminal ID. The index of this table is hwMgcpTIDPrefixMgId. |
| 1.3.6.1.4.1.2011.6.36.1.42.1 | RowhwMgcpTIDConfigEntry | not-accessible | current | This table is used to config MGCP terminal ID. The index of this entry is hwMgcpTIDPrefixMgId. |
| 1.3.6.1.4.1.2011.6.36.1.42.1.1 | ColumnhwMgcpTIDPrefixMgId | not-accessible | current | Media Gateway ID |
| 1.3.6.1.4.1.2011.6.36.1.42.1.2 | ColumnhwMgcpBraPrefix | read-write | current | Indicates the BRA terminal prefix. |
| 1.3.6.1.4.1.2011.6.36.1.42.1.3 | ColumnhwMgcpPraPrefix | read-write | current | Indicates the PRA terminal prefix. |
| 1.3.6.1.4.1.2011.6.36.1.42.1.4 | ColumnhwMgcpPstnPrefix | read-write | current | Indicates the PSTN terminal prefix. |
| 1.3.6.1.4.1.2011.6.36.1.42.1.5 | ColumnhwMgcpBraTemplateIndex | read-write | current | Indicates the index of the BRA TID profile. |
| 1.3.6.1.4.1.2011.6.36.1.42.1.6 | ColumnhwMgcpPraTemplateIndex | read-write | current | Indicates the index of the PRA TID profile. |
| 1.3.6.1.4.1.2011.6.36.1.42.1.7 | ColumnhwMgcpPstnTemplateIndex | read-write | current | Indicates the index of the PSTN TID profile. |
| 1.3.6.1.4.1.2011.6.36.1.42.1.8 | ColumnhwMgcpIsNeedToConfigTID | read-only | current | Indicates whether the terminal ID needs to be configured for the subscriber. Bit0 (low) to bit31 (high) respectively represent PSTN, BRA, and PRA. The remainin… |
| 1.3.6.1.4.1.2011.6.36.2 | NodehwIASVoipTraps | |||
| 1.3.6.1.4.1.2011.6.36.2.0 | NodehwIASVoipAlarmTraps | |||
| 1.3.6.1.4.1.2011.6.36.2.1 | NodehwIASVoipAlarmOids | |||
| 1.3.6.1.4.1.2011.6.36.5 | NodehwIASMgcpTrapsVbOids | |||
| 1.3.6.1.4.1.2011.6.36.5.1 | ScalarhwMgcpTrapRequestID | accessible-for-notify | current | The MGCP trap request ID. |
| 1.3.6.1.4.1.2011.6.36.5.2 | ScalarhwMgcpMgStatus | accessible-for-notify | current | The status of the MGCP media gateway. Options: 1. up(1) -normal 2. down(2) -down 3. fault(3) -fault 4. waitAck(4) -waiting for ACK |
| 1.3.6.1.4.1.2011.6.36.5.3 | ScalarhwMgcpTrapLastChangeTime | accessible-for-notify | current | The value of sysUpTime at the time the media gateway or the media gateway control entered its current status or media gateway control switched. |
| 1.3.6.1.4.1.2011.6.36.5.4 | ScalarhwMgcpMgcIpAddress | accessible-for-notify | current | The mgc ip address. |
| 1.3.6.1.4.1.2011.6.36.5.5 | ScalarhwMgcpMgcIndex | accessible-for-notify | current | The current mgc index. |
| 1.3.6.1.4.1.2011.6.36.5.6 | ScalarhwMgcpMgcStatus | accessible-for-notify | current | The media gateway control status. Options: 1. up(1) -indicates that the media gateway control status is up 2. down(2) -indicates that the media gateway control… |
| 1.3.6.1.4.1.2011.6.36.5.7 | ScalarhwMgcpFrame | accessible-for-notify | current | The frame where mg user is configed. |
| 1.3.6.1.4.1.2011.6.36.5.8 | ScalarhwMgcpSlot | accessible-for-notify | current | The slot where mg user is configed. |
| 1.3.6.1.4.1.2011.6.36.5.9 | ScalarhwMgcpPort | accessible-for-notify | current | The port where mg user is configed. |
| 1.3.6.1.4.1.2011.6.36.5.10 | ScalarhwMgcpMgcPort | accessible-for-notify | current | The UDP port of the MGC. |
| 1.3.6.1.4.1.2011.6.36.5.11 | ScalarhwMgcpIsConfigTid | accessible-for-notify | current | Indicates whether the terminal ID needs to be configured for the subscriber. Bit0 (low) to bit31 (high) respectively represent PSTN, BRA, PRA, DPNSS, DASS2, an… |
| 1.3.6.1.4.1.2011.6.36.5.12 | ScalarhwMgcpIsUpdateTid | accessible-for-notify | current | Indicates whether the terminal ID needs to be updated for the subscriber. Bit0 (low) to bit31 (high) respectively represent PSTN, BRA, PRA, DPNSS, DASS2, and R… |
| 1.3.6.1.4.1.2011.6.36.6 | NodehwIASMgcpTraps | |||
| 1.3.6.1.4.1.2011.6.36.6.1 | NodehwIASMgcpCommonTraps | |||
| 1.3.6.1.4.1.2011.6.36.6.1.0 | NodehwIASMgcpCommonTrapsPrefix | |||
| 1.3.6.1.4.1.2011.6.36.6.1.0.1 | NotificationhwIASMgcpResetTrap | current | This notification indicates that the MGCP media gateway reset result. | |
| 1.3.6.1.4.1.2011.6.36.6.1.0.2 | NotificationhwIASMgcpShutdownTrap | current | This notification indicates that the MGCP media gateway shutdown result. | |
| 1.3.6.1.4.1.2011.6.36.6.1.0.3 | NotificationhwIASMgcpMgStateTrap | current | This notification indicates that the MGCP media gateway status change. | |
| 1.3.6.1.4.1.2011.6.36.6.1.0.4 | NotificationhwIASMgcpMgcSwitchTrap | current | This notification indicates that the MGCP media gateway control switched. | |
| 1.3.6.1.4.1.2011.6.36.6.1.0.5 | NotificationhwIASMgcpMgcStateTrap | current | This notification indicates that the MGCP media gateway control status changed. | |
| 1.3.6.1.4.1.2011.6.36.6.1.0.6 | NotificationhwIASMgcpMgLableTrap | current | This notification indicates that the userlabel of the MGCP interface changed. | |
| 1.3.6.1.4.1.2011.6.36.6.1.0.7 | NotificationhwIASMgcpTidUpdateTrap | current | This notification indicates that the MGCP terminal ID updated. | |
| 1.3.6.1.4.1.2011.6.36.6.2 | NodehwIASMgcpAlarmTraps | |||
| 1.3.6.1.4.1.2011.6.36.6.2.0 | NodehwIASMgcpAlarmTrapsPrefix | |||
| 1.3.6.1.4.1.2011.6.36.6.2.0.1 | NotificationhwIASMgcpMgFaultTrap | current | The MGCP media gateway is closed. This trap when a card asserts an alarm. | |
| 1.3.6.1.4.1.2011.6.36.6.2.0.2 | NotificationhwIASMgcpMgRestoreTrap | current | The MGCP media gateway is up. This trap when a card asserts an alarm. | |
| 1.3.6.1.4.1.2011.6.36.6.2.0.3 | NotificationhwIASMgcpAbsentResourceTrap | current | This notification indicates that the DSP resources is insufficient. |