HUAWEI-VOLC-MIB
101 objects
The mib entity to describe voice overload controll.
Imported Objects
| HUAWEI-MIB | huaweiUtility |
| SNMPv2-CONF | MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-SMI | Counter32 Integer32 IpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE private TimeTicks |
| SNMPv2-TC | DisplayString RowStatus TEXTUAL-CONVENTION |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2011.6.36 | IdentityhwVoip | The mib entity to describe voice overload controll. | ||
| 1.3.6.1.4.1.2011.6.36.1 | NodehwIASVoipObjects | |||
| 1.3.6.1.4.1.2011.6.36.1.53 | TablehwMgMGCOverloadCfgTable | not-accessible | current | Indicates the MGC overload configuration table of the MG interface. The index of this table is hwMGCOverloadCfgMgId. |
| 1.3.6.1.4.1.2011.6.36.1.53.1 | RowhwMgMGCOverloadCfgEntry | not-accessible | current | Indicates the MGC overload configuration table of the MG interface. The index of this entry is hwMGCOverloadCfgMgId. |
| 1.3.6.1.4.1.2011.6.36.1.53.1.1 | ColumnhwMGCOverloadCfgMgId | not-accessible | current | Indicates the MG interface ID. Range:0-16777215 |
| 1.3.6.1.4.1.2011.6.36.1.53.1.2 | ColumnhwMGCOverloadCfgT3 | read-write | current | Indicates the maximum channel occupancy rate (T3) of calls at the highest level.(50>=T3>=T2>=T1>=0). Range:0-50 Default:50 |
| 1.3.6.1.4.1.2011.6.36.1.53.1.3 | ColumnhwMGCOverloadCfgT2 | read-write | current | Indicates the maximum channel occupancy rate (T2) of calls at the second highest level.(50>=T3>=T2>=T1>=0). Range:0-50 Default:50 |
| 1.3.6.1.4.1.2011.6.36.1.53.1.4 | ColumnhwMGCOverloadCfgT1 | read-write | current | Indicates the maximum channel occupancy rate (T1) of calls at the common level.(50>=T3>=T2>=T1>=0). Range:0-50 Default:50 |
| 1.3.6.1.4.1.2011.6.36.1.53.1.5 | ColumnhwMGCOverloadCfgCallGappingTimer | read-write | current | Indicates the length of the call-gapping timer. Range:0-120 |
| 1.3.6.1.4.1.2011.6.36.1.53.1.6 | ColumnhwMGCOverloadCfgMaxAdmitRate | read-write | current | Indicates the maximum pass rate of the leaky bucket. Range:0-10000 |
| 1.3.6.1.4.1.2011.6.36.1.53.1.7 | ColumnhwMGCOverloadCfgthrottlingCallTreat | read-write | current | Indicates the announcement indicating that the subscriber-side network is busy after the call leaks to the leaky bucket:1:EET 2:announcement Range:1-2 Default:1 |
| 1.3.6.1.4.1.2011.6.36.1.53.1.8 | ColumnhwMGCOverloadCfgnotratControl | read-write | deprecated | Indicates the notrat control switch:1:on 2:off |
| 1.3.6.1.4.1.2011.6.36.1.53.1.9 | ColumnhwMGCOverloadCfgnotratValue | read-write | current | Indicates the maximum pass rate issued by the softswitch. |
| 1.3.6.1.4.1.2011.6.36.1.53.1.10 | ColumnhwMGCOverloadnotratValue | read-only | current | Indicates the actual pass rate of the overload leaky bucket of the current MGC. Range:0-10000 |
| 1.3.6.1.4.1.2011.6.36.1.53.1.11 | ColumnhwMGCOverloadCfgSupport | read-write | current | Indicates the overload control switch of the MGC. Options: 1.enable(1) -indicates the overload control switch of the MGC is enable 2.disable(2) -indicates the … |
| 1.3.6.1.4.1.2011.6.36.1.53.1.12 | ColumnhwMGCOverloadCfgBraWeightExchange | read-write | current | Indicates the BRA user weight in the case of MGC overload. Range:0-10000 Default:200 |
| 1.3.6.1.4.1.2011.6.36.1.53.1.13 | ColumnhwMGCOverloadCfgPraWeightExchange | read-write | current | Indicates the PRA user weight in the case of MGC overload. Range:0-10000 Default:3000 |
| 1.3.6.1.4.1.2011.6.36.1.53.1.14 | ColumnhwMGCOverloadCfgIsdnCapabExchange | read-write | current | Indicates the conversion of the ISDN call capacity to the POTS call capacity in the case of MGC overload. Range:0-10000 Default:100 |
| 1.3.6.1.4.1.2011.6.36.1.54 | TablehwMgMGCOverloadRecordTable | not-accessible | current | Indicates the call record of the MG interface in the case of MGC overload. The index of this table is hwMGCOverloadRecordIndex. |
| 1.3.6.1.4.1.2011.6.36.1.54.1 | RowhwMgMGCOverloadRecordEntry | not-accessible | current | Indicates the call record of the MG interface in the case of MGC overload. The index of this entry is hwMGCOverloadRecordIndex. |
| 1.3.6.1.4.1.2011.6.36.1.54.1.1 | ColumnhwMGCOverloadRecordIndex | not-accessible | current | Indicates the MGC overload record index of the MG interface. Range:0-16777215 |
| 1.3.6.1.4.1.2011.6.36.1.54.1.2 | ColumnhwMGCOverloadStartYear | read-only | current | Indicates the MGC overload start time of the MG interface(year). |
| 1.3.6.1.4.1.2011.6.36.1.54.1.3 | ColumnhwMGCOverloadStartMonth | read-only | current | Indicates the MGC overload start time of the MG interface(month). |
| 1.3.6.1.4.1.2011.6.36.1.54.1.4 | ColumnhwMGCOverloadStartDay | read-only | current | Indicates the MGC overload start time of the MG interface(day). |
| 1.3.6.1.4.1.2011.6.36.1.54.1.5 | ColumnhwMGCOverloadStartHour | read-only | current | Indicates the MGC overload start time of the MG interface(hour). |
| 1.3.6.1.4.1.2011.6.36.1.54.1.6 | ColumnhwMGCOverloadStartMinute | read-only | current | Indicates the MGC overload start time of the MG interface(minute). |
| 1.3.6.1.4.1.2011.6.36.1.54.1.7 | ColumnhwMGCOverloadStartSecond | read-only | current | Indicates the MGC overload start time of the MG interface(second). |
| 1.3.6.1.4.1.2011.6.36.1.54.1.8 | ColumnhwMGCOverloadMgId | read-only | current | Indicates the MG interface ID. Range:0-16777215 |
| 1.3.6.1.4.1.2011.6.36.1.54.1.9 | ColumnhwMGCOverloadMgcIp | read-only | current | MGC IP |
| 1.3.6.1.4.1.2011.6.36.1.54.1.10 | ColumnhwMGCOverloadMgcPort | read-only | current | MGC PORT |
| 1.3.6.1.4.1.2011.6.36.1.54.1.11 | ColumnhwMGCOverloadEndYear | read-only | current | Indicates the MGC overload end time of the MG interface(year). |
| 1.3.6.1.4.1.2011.6.36.1.54.1.12 | ColumnhwMGCOverloadEndMonth | read-only | current | Indicates the MGC overload end time of the MG interface(month). |
| 1.3.6.1.4.1.2011.6.36.1.54.1.13 | ColumnhwMGCOverloadEndDay | read-only | current | Indicates the MGC overload end time of the MG interface(day). |
| 1.3.6.1.4.1.2011.6.36.1.54.1.14 | ColumnhwMGCOverloadEndHour | read-only | current | Indicates the MGC overload end time of the MG interface(hour). |
| 1.3.6.1.4.1.2011.6.36.1.54.1.15 | ColumnhwMGCOverloadEndMinute | read-only | current | Indicates the MGC overload end time of the MG interface(minute). |
| 1.3.6.1.4.1.2011.6.36.1.54.1.16 | ColumnhwMGCOverloadEndSecond | read-only | current | Indicates the MGC overload end time of the MG interface(second). |
| 1.3.6.1.4.1.2011.6.36.1.54.1.17 | ColumnhwMGCOverloadOffHookNum | read-only | current | Indicates the received offhooks of the MG interface in the case of MGC overload. |
| 1.3.6.1.4.1.2011.6.36.1.54.1.18 | ColumnhwMGCOverloadOffHookPassNum | read-only | current | Indicates the passed offhooks of the MG interface in the case of MGC overload. |
| 1.3.6.1.4.1.2011.6.36.1.56 | NodehwMgOverloadCtrlCfgTable | |||
| 1.3.6.1.4.1.2011.6.36.1.56.1 | ScalarhwMgOverloadCtrlCfgPstnPowerDialerSupport | read-write | current | Indicates the power dialer switch in the PSTN overload control. Options: 1. enable(1) -indicates the power dialer switch in the PSTN overload control is enable… |
| 1.3.6.1.4.1.2011.6.36.1.56.2 | ScalarhwMgOverloadCtrlCfgPstnPowerDialerDetectionPeriod | read-write | current | Indicates the duration of power dialer detection in the PSTN overload control. Range:1-20 Default:10 |
| 1.3.6.1.4.1.2011.6.36.1.56.3 | ScalarhwMgOverloadCtrlCfgPstnPowerDialerEventsNum | read-write | current | Indicates the count of offhooks within the duration of power dialer detection in the PSTN overload control. Range:2-50 Default:20 |
| 1.3.6.1.4.1.2011.6.36.1.56.4 | ScalarhwMgOverloadCtrlCfgPstnPowerDialerBaseTimer | read-write | current | Indicates the duration of power dialer recovery detection in the PSTN overload control. Range:1-10 Default:2 |
| 1.3.6.1.4.1.2011.6.36.1.56.5 | ScalarhwMgOverloadCfgCallSurgeSupport | read-write | current | Indicates the call surge switch in the MG overload control. Options: 1. enable(1) -indicates the call surge switch in the MG overload control is enable 2. disa… |
| 1.3.6.1.4.1.2011.6.36.1.56.6 | ScalarhwMgOverloadCfgOnhookSurgeSupport | read-write | current | Indicates the onhook surge switch in the MG overload control. Options: 1. enable(1) -indicates the onhook surge switch in the MG overload control is enable 2. … |
| 1.3.6.1.4.1.2011.6.36.1.56.7 | ScalarhwMgOverloadCfgRestrictCpuLevel | read-write | current | Indicates the expected CPU usage in the case of MG overload. Range: 1-99 Default : 70 |
| 1.3.6.1.4.1.2011.6.36.1.56.8 | ScalarhwMgOverloadCfgCalledSurgeSupport | read-write | current | Indicates the called surge switch in the MG overload control. Options: 1. enable(1) -indicates the called surge switch in the MG overload control is enable 2. … |
| 1.3.6.1.4.1.2011.6.36.1.56.9 | ScalarhwMgOverloadCfgInitLeakRate | read-write | current | Indicates the initial leak rate of the leaky bucket for MG overload control. Initial value: 6 for BT and 15 for other carriers. Range: 1-100 |
| 1.3.6.1.4.1.2011.6.36.1.56.10 | ScalarhwMgOverloadCfgThreshold1 | read-write | current | Indicates leak rate threshold 1 of the leaky bucket for MG overload control, that is, the maximum water level of the leaky bucket is 1. Range: 1-100 Default : … |
| 1.3.6.1.4.1.2011.6.36.1.56.11 | ScalarhwMgOverloadCfgThreshold2 | read-write | current | Indicates leak rate threshold 2 of the leaky bucket for MG overload control, that is, the maximum water level of the leaky bucket is 2. Range: 1-100 Default : … |
| 1.3.6.1.4.1.2011.6.36.1.56.12 | ScalarhwMgOverloadCfgAdjustFactor | read-write | current | Indicates the adjustment factor of the leaky bucket for MG overload control. It is used to upshift or downshift the adjustment speed of the leak rate. The smal… |
| 1.3.6.1.4.1.2011.6.36.1.56.13 | ScalarhwMgOverloadCfgResumeTimer | read-write | current | Indicates the delay of reporting the recovery alarm after the MG overload recovers, in the unit of second. Range: 1-120 Default : 30 |
| 1.3.6.1.4.1.2011.6.36.1.56.14 | ScalarhwMgOverloadCfgBraWeightExchange | read-write | current | Indicates the BRA user weight in the case of MG overload. Range: 1-10000 Default : 200 |
| 1.3.6.1.4.1.2011.6.36.1.56.15 | ScalarhwMgOverloadCfgPraWeightExchange | read-write | current | Indicates the PRA user weight in the case of MG overload. Range: 1-10000 Default : 3000 |
| 1.3.6.1.4.1.2011.6.36.1.56.16 | ScalarhwMgOverloadCfgIsdnCapabExchange | read-write | current | Indicates the conversion of the ISDN call capacity to the POTS call capacity in the case of MG overload. Range: 1-10000 Default : 120 |
| 1.3.6.1.4.1.2011.6.36.1.56.17 | ScalarhwMgOverloadCtrlCfgBraPowerDialerSupport | read-write | current | abandoned. Options: 1. enable(1) -abandoned 2. disable(2) -abandoned Default: enable |
| 1.3.6.1.4.1.2011.6.36.1.56.18 | ScalarhwMgOverloadCtrlCfgBraPowerDialerDetectionPeriod | read-write | current | Indicates the duration of power dialer detection in the BRA overload control. Range: 1-100 Default : 10 |
| 1.3.6.1.4.1.2011.6.36.1.56.19 | ScalarhwMgOverloadCtrlCfgBraPowerDialerEventsNum | read-write | current | Indicates the number of non-retransmitted setup messages within the duration of power dialer detection in the BRA overload control. Range: 1-10000 Default : 20 |
| 1.3.6.1.4.1.2011.6.36.1.56.20 | ScalarhwMgOverloadCtrlCfgBraPowerDialerBaseTimer | read-write | current | Indicates the duration of power dialer recovery detection in the BRA overload control. Range: 1-10 Default : 2 |
| 1.3.6.1.4.1.2011.6.36.1.56.21 | ScalarhwMgOverloadCtrlCfgIsdn30ePowerDialerSupport | read-write | current | abandoned. Options: 1. enable(1) -abandoned 2. disable(2) -abandoned |
| 1.3.6.1.4.1.2011.6.36.1.56.22 | ScalarhwMgOverloadCtrlCfgIsdn30ePowerDialerDetectionPeriod | read-write | current | Indicates the duration of power dialer detection in the ISDN30E overload control. Range: 1-100 Default : 10 |
| 1.3.6.1.4.1.2011.6.36.1.56.23 | ScalarhwMgOverloadCtrlCfgIsdn30ePowerDialerEventsNum | read-write | current | Indicates the number of non-retransmitted setup messages within the duration of power dialer detection in the ISDN30E overload control. Range: 1-10000 Default … |
| 1.3.6.1.4.1.2011.6.36.1.56.24 | ScalarhwMgOverloadCtrlCfgIsdn30ePowerDialerBaseTimer | read-write | current | Indicates the duration of power dialer recovery detection in the ISDN30E overload control. Range: 1-10 Default : 2 |
| 1.3.6.1.4.1.2011.6.36.1.56.25 | ScalarhwMgOverloadCtrlCfgDpnssPowerDialerSupport | read-write | current | abandoned. Options: 1. enable(1) -abandoned 2. disable(2) -abandoned |
| 1.3.6.1.4.1.2011.6.36.1.56.26 | ScalarhwMgOverloadCtrlCfgDpnssPowerDialerDetectionPeriod | read-write | current | Indicates the duration of power dialer detection in the DPNSS overload control. Range: 1-100 Default : 10 |
| 1.3.6.1.4.1.2011.6.36.1.56.27 | ScalarhwMgOverloadCtrlCfgDpnssPowerDialerEventsNum | read-write | current | Indicates the number of non-retransmitted ISRM messages within the duration of power dialer detection in the DPNSS overload control. Range: 1-10000 Default : 2… |
| 1.3.6.1.4.1.2011.6.36.1.56.28 | ScalarhwMgOverloadCtrlCfgDpnssPowerDialerBaseTimer | read-write | current | Indicates the duration of power dialer recovery detection in the DPNSS overload control. Range: 1-10 Default : 2 |
| 1.3.6.1.4.1.2011.6.36.1.56.29 | ScalarhwMgOverloadCtrlCfgDass2PowerDialerSupport | read-write | current | abandoned. Options: 1. enable(1) -abandoned 2. disable(2) -abandoned |
| 1.3.6.1.4.1.2011.6.36.1.56.30 | ScalarhwMgOverloadCtrlCfgDass2PowerDialerDetectionPeriod | read-write | current | Indicates the duration of power dialer detection in the DASS2 overload control. Range: 1-100 Default : 10 |
| 1.3.6.1.4.1.2011.6.36.1.56.31 | ScalarhwMgOverloadCtrlCfgDass2PowerDialerEventsNum | read-write | current | Indicates the number of non-retransmitted ISRM messages within the duration of power dialer detection in the DASS2 overload control. Range: 1-10000 Default : 2… |
| 1.3.6.1.4.1.2011.6.36.1.56.32 | ScalarhwMgOverloadCtrlCfgDass2PowerDialerBaseTimer | read-write | current | Indicates the duration of power dialer recovery detection in the DASS2 overload control. Range: 1-10 Default : 2 |
| 1.3.6.1.4.1.2011.6.36.1.56.33 | ScalarhwMgOverloadCtrlCfgL3ProxyTimerti01 | read-write | current | Indicates the length of the protection timer when the ISDN proxy is in the BlackHole state, at a step of 5. Range: 0-30 Default : 20 |
| 1.3.6.1.4.1.2011.6.36.1.56.34 | ScalarhwMgOverloadCtrlCfgL3ProxyTimerti02 | read-write | current | Indicates the length of the protection timer when the DSS2 proxy is in the Overlap state, at a step of 1. Range: 10-20 Default : 10 |
| 1.3.6.1.4.1.2011.6.36.1.56.35 | ScalarhwMgOverloadCtrlCfgL3ProxyTimerti03 | read-write | current | Indicates the length of the protection timer when the ISDN proxy is in the Fail_call state, at a step of 1. Range: 0-15 Default : 10 |
| 1.3.6.1.4.1.2011.6.36.1.56.36 | ScalarhwMgOverloadCtrlCfgL3ProxyTimerti05 | read-write | current | Indicates the length of the protection timer when the ISDN proxy is in the Clash state, at a step of 5. Range: 0-30 Default : 20 |
| 1.3.6.1.4.1.2011.6.36.1.56.37 | ScalarhwMgOverloadCtrlCfgL3ProxyTimerti06 | read-write | current | Indicates the length of the protection timer when the ISDN proxy is in the Fail_delay state, at a step of 5. Range: 0-30 Default : 20 |
| 1.3.6.1.4.1.2011.6.36.1.56.38 | ScalarhwMgOverloadCtrlCfgL3ProxyTimert302 | read-write | current | Indicates the length of the protection timer when the ISDN proxy is in the Fail_delay state, at a step of 1. Range: 10-15 Default : 10 |
| 1.3.6.1.4.1.2011.6.36.1.56.39 | ScalarhwMgOverloadCtrlCfgBraAccessSetupRate | read-write | current | Bra access rate. Unit: 0.01caps Default: 10 |
| 1.3.6.1.4.1.2011.6.36.1.56.40 | ScalarhwMgOverloadCtrlCfgPraAccessSetupRate | read-write | current | PRA(ISDN30e/ISDN30/DPNSS1) access rate. Unit: 0.01caps Default: 100 |
| 1.3.6.1.4.1.2011.6.36.1.56.41 | ScalarhwMgOverloadCtrlCfgAccessSetupRateBucketDepth | read-write | current | ISDN Access rate bucket threshold Default: 10 |
| 1.3.6.1.4.1.2011.6.36.1.153 | NodehwSystemOverloadCfgTable | |||
| 1.3.6.1.4.1.2011.6.36.1.153.1 | ScalarhwSystemOverloadCtrlOriginatingCallSurgeInitLeakRate | read-write | current | Indicates the initial leak rate of the system call surge leaky bucket. Initial value: 6 for BT and 15 for other carriers. Range:0-100 |
| 1.3.6.1.4.1.2011.6.36.1.153.2 | ScalarhwSystemOverloadCtrlOriginatingCallSurgeBucketThreshold1 | read-write | current | Indicates leak rate threshold 1 of the system call surge leaky bucket, that is, the maximum water level of the bucket is 1. Range:0-100 |
| 1.3.6.1.4.1.2011.6.36.1.153.3 | ScalarhwSystemOverloadCtrlOriginatingCallSurgeBucketThreshold2 | read-write | current | Indicates leak rate threshold 2 of the system call surge leaky bucket, that is, the maximum water level of the bucket is 2. Range:0-100 |
| 1.3.6.1.4.1.2011.6.36.1.153.4 | ScalarhwSystemOverloadCtrlOriginatingCallSurgeAdjustFactor | read-write | current | Indicates the adjustment factor of the system call surge leaky bucket. It is used to upshift or downshift the adjustment speed of the leak rate. The smaller th… |
| 1.3.6.1.4.1.2011.6.36.1.153.5 | ScalarhwSystemOverloadCtrlOriginatingCallSurgeTerminationTime | read-write | current | Indicates the delay of reporting the recovery alarm after the call surge recovers, in the unit of second. Range:0-100 |
| 1.3.6.1.4.1.2011.6.36.1.153.6 | ScalarhwSystemOverloadCtrlTerminatingCallSurgeInitLeakRate | read-write | current | Indicates the initial leak rate of the system terminating call surge leaky bucket. Range:0-100 |
| 1.3.6.1.4.1.2011.6.36.1.153.7 | ScalarhwSystemOverloadCtrlTerminatingCallSurgeBucketThreshold | read-write | current | Indicates the leak rate threshold of the system terminating call surge leaky bucket, namely, the maximum water level of the system leaky bucket. Range:0-100 |
| 1.3.6.1.4.1.2011.6.36.1.153.8 | ScalarhwSystemOverloadCtrlTerminatingCallSurgeAdjustFactor | read-write | current | Indicates the adjustment factor of the terminating call surge leaky bucket. Range:0-100 |
| 1.3.6.1.4.1.2011.6.36.1.153.9 | ScalarhwSystemOverloadCtrlTerminatingCallSurgeTerminationTime | read-write | current | Indicates the delay of reporting the recovery alarm after the terminating call surge recovers. Range:0-120 |
| 1.3.6.1.4.1.2011.6.36.1.153.10 | ScalarhwSystemOverloadCtrlCallClearSurgeInitLeakRate | read-write | current | Indicates the initial leak rate of the system call clear surge leaky bucket, namely, the current leak rate initialized by the system. The current leak rate is … |
| 1.3.6.1.4.1.2011.6.36.1.153.11 | ScalarhwSystemOverloadCtrlCallClearSurgeBucketThreshold | read-write | current | Indicates the leak rate threshold of the system call clear surge leaky bucket, namely, the maximum water level of the system leaky bucket. Initial value: 30 fo… |
| 1.3.6.1.4.1.2011.6.36.1.153.12 | ScalarhwSystemOverloadCtrlCallClearSurgeAdjustFactor | read-write | current | Indicates the adjustment factor of the system call clear surge leaky bucket, used to upshift or downshift the adjustment speed of the leak rate. It is invalid … |
| 1.3.6.1.4.1.2011.6.36.1.153.13 | ScalarhwSystemOverloadCtrlCallClearSurgeTerminationTime | read-write | current | Indicates the delay of reporting the recovery alarm after the call clear surge recovers, in the unit of second. It is invalid for an ISDN call. Range:0-120 |
| 1.3.6.1.4.1.2011.6.36.1.153.14 | ScalarhwSystemOverloadCtrlMgBraWeightExchange | read-write | current | Indicates the BRA user weight in the case of MG overload. Range:0-10000 |
| 1.3.6.1.4.1.2011.6.36.1.153.15 | ScalarhwSystemOverloadCtrlMgPraWeightExchange | read-write | current | Indicates the PRA user weight in the case of MG overload. Range:0-10000 |
| 1.3.6.1.4.1.2011.6.36.1.153.16 | ScalarhwSystemOverloadCtrlMgIsdnCapabExchange | read-write | current | Indicates the conversion of the ISDN call capacity to the POTS call capacity in the case of MG overload. Range:0-10000 |
| 1.3.6.1.4.1.2011.6.36.1.153.17 | ScalarhwSystemOverloadCtrlMgcBraWeightExchange | read-write | current | Indicates the BRA user weight in the case of MGC overload. Range:0-10000 |
| 1.3.6.1.4.1.2011.6.36.1.153.18 | ScalarhwSystemOverloadCtrlMgcPraWeightExchange | read-write | current | Indicates the PRA user weight in the case of MGC overload. Range:0-10000 |
| 1.3.6.1.4.1.2011.6.36.1.153.19 | ScalarhwSystemOverloadCtrlMgcIsdnCapabExchange | read-write | current | Indicates the conversion of the ISDN call capacity to the POTS call capacity in the case of MGC overload. Range:0-10000 |
| 1.3.6.1.4.1.2011.6.36.2 | NodehwIASVoipTraps |