HUAWEI-VPN-DIAGNOSTICS-MIB
72 objects
HUAWEI service quality detect funcion.
Imported Objects
| HUAWEI-MIB | hwDatacomm |
| HUAWEI-VPLS-EXT-MIB | HWL2VpnVcEncapsType |
| INET-ADDRESS-MIB | InetAddress InetAddressType |
| P-BRIDGE-MIB | EnabledStatus |
| SNMPv2-CONF | OBJECT-GROUP |
| SNMPv2-SMI | Integer32 mib-2 MODULE-IDENTITY OBJECT-TYPE |
| SNMPv2-TC | DisplayString MacAddress RowStatus TEXTUAL-CONVENTION |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2011.5.25.172 | Identityvpndiagnostics | HUAWEI service quality detect funcion. | ||
| 1.3.6.1.4.1.2011.5.25.172.1 | Nodemacoper | |||
| 1.3.6.1.4.1.2011.5.25.172.1.1 | NodepopulateBase | |||
| 1.3.6.1.4.1.2011.5.25.172.1.1.1 | ScalarhwOamMacPopulateCount | read-only | current | Received populate packets in current device. |
| 1.3.6.1.4.1.2011.5.25.172.1.1.2 | ScalarhwOamMacPurgeCount | read-only | current | Received purge packets in current device. |
| 1.3.6.1.4.1.2011.5.25.172.1.1.3 | ScalarhwOamMacPurgeRegCount | read-only | current | Received purge(register) packets in current device. |
| 1.3.6.1.4.1.2011.5.25.172.1.1.4 | ScalarhwOamMacCountReset | read-write | current | Reset the count of hwOamMacPopulateCount and hwOamMacPurgeCount, the value 1 means reset hwOamMacPopulateCount,the value is 2 means reset hwOamMacPurgeCount, t… |
| 1.3.6.1.4.1.2011.5.25.172.1.1.5 | ScalarhwOamMacSwitch | read-write | current | Indicates the switch of enabling MAC populate,if the value is 1, enable; if the value is 2, disable. |
| 1.3.6.1.4.1.2011.5.25.172.1.1.6 | ScalarhwOamMacEntryNum | read-only | current | The entry number of hwOamMacDisplayTable. |
| 1.3.6.1.4.1.2011.5.25.172.1.2 | TablehwOamMacOperTable | not-accessible | current | A table which to be populate or purge operation. |
| 1.3.6.1.4.1.2011.5.25.172.1.2.1 | RowhwOamMacOperEntry | not-accessible | current | Entries of hwOamMacOperTable. |
| 1.3.6.1.4.1.2011.5.25.172.1.2.1.1 | ColumnhwOamMacOperIndex | not-accessible | current | The index of hwOamMacOperIndex,it is always 1. |
| 1.3.6.1.4.1.2011.5.25.172.1.2.1.2 | ColumnhwOamMacOperAddress | read-create | current | The MAC that to be populated or purged. |
| 1.3.6.1.4.1.2011.5.25.172.1.2.1.3 | ColumnhwOamMacOperVsiName | read-create | current | The name or other identifier referring to the VSI which is correlative to the hwOamMac. |
| 1.3.6.1.4.1.2011.5.25.172.1.2.1.4 | ColumnhwOamMacOperType | read-create | current | The operate type,1 means populate,2 means purge. |
| 1.3.6.1.4.1.2011.5.25.172.1.2.1.5 | ColumnhwOamMacOperRegister | read-create | current | while purge a OAM MAC,register it to be a reserved MAC . 1 means register, 2 means not register. Defaut is 2. |
| 1.3.6.1.4.1.2011.5.25.172.1.2.1.6 | ColumnhwOamMacOperFlood | read-create | current | Broadcast the packet or not. 1 means broadcast, 2 means don`t broadcast.Defaut is 2. |
| 1.3.6.1.4.1.2011.5.25.172.1.2.1.7 | ColumnhwOamMacOperNum | read-create | current | The number of packets which want to be sent. |
| 1.3.6.1.4.1.2011.5.25.172.1.2.1.8 | ColumnhwOamMacOperRowStatus | read-create | current | The operating state of the row. |
| 1.3.6.1.4.1.2011.5.25.172.1.3 | TablehwOamMacListTable | not-accessible | current | A table which displays the OAM MAC applied at huawei. |
| 1.3.6.1.4.1.2011.5.25.172.1.3.1 | RowhwOamMacListEntry | not-accessible | current | Display the OAM MAC applied at huawei. |
| 1.3.6.1.4.1.2011.5.25.172.1.3.1.1 | ColumnhwOamMacListIndex | not-accessible | current | The index of hwOamMacListIndex. |
| 1.3.6.1.4.1.2011.5.25.172.1.3.1.2 | ColumnhwOamMacListAddress | read-only | current | The OAM MAC applied at huawei. |
| 1.3.6.1.4.1.2011.5.25.172.1.4 | TablehwOamMacDisplayTable | not-accessible | current | A table which displays the result of populate or purge operation. |
| 1.3.6.1.4.1.2011.5.25.172.1.4.1 | RowhwOamMacDisplayEntry | not-accessible | current | Entries of hwOamMacDisplayTable. |
| 1.3.6.1.4.1.2011.5.25.172.1.4.1.1 | ColumnhwOamMacDisplayIndex | not-accessible | current | The index of hwOamMacDisplayEntry, the value range is from 1 to 100. |
| 1.3.6.1.4.1.2011.5.25.172.1.4.1.2 | ColumnhwOamMacDisplayAddress | read-only | current | The OAM MAC that had been populated or purged. |
| 1.3.6.1.4.1.2011.5.25.172.1.4.1.3 | ColumnhwOamMacDisplayType | read-only | current | The OAM MAC type, 1 means populate, 2 means purge. |
| 1.3.6.1.4.1.2011.5.25.172.1.4.1.4 | ColumnhwOamMacDisplayVsiName | read-only | current | The name or other identifier referring to the VSI which is correlative to the hwOamMac. |
| 1.3.6.1.4.1.2011.5.25.172.1.4.1.5 | ColumnhwOamMacDisplayAgeTime | read-only | current | The age time of the entry. |
| 1.3.6.1.4.1.2011.5.25.172.1.4.1.6 | ColumnhwOamMacDisplayLsrId | read-only | current | The LSR-ID of the sender. |
| 1.3.6.1.4.1.2011.5.25.172.1.5 | NodehwOamMacGroup | |||
| 1.3.6.1.4.1.2011.5.25.172.1.5.1 | GrouphwPopuBaseGroup | current | hwPopuBaseGroup. | |
| 1.3.6.1.4.1.2011.5.25.172.1.5.2 | GrouphwOamMacOperGroup | current | A collection of objects indicating information of IP address of interface, contain Ip address, Ip address mask and Ip address acquiring method. | |
| 1.3.6.1.4.1.2011.5.25.172.1.5.3 | GrouphwOamMacListGroup | current | A collection of objects indicating information of IP address of interface, contain Ip address, Ip address mask and Ip address acquiring method. | |
| 1.3.6.1.4.1.2011.5.25.172.1.5.4 | GrouphwOamMacDisplayGroup | current | A collection of objects indicating information of IP address of interface, contain Ip address, Ip address mask and Ip address acquiring method. | |
| 1.3.6.1.4.1.2011.5.25.172.2 | NodehwVpnCfgPing | |||
| 1.3.6.1.4.1.2011.5.25.172.2.1 | TablehwVpnCfgPingTable | not-accessible | current | hwVpnCfgPingTable. |
| 1.3.6.1.4.1.2011.5.25.172.2.1.1 | RowhwVpnCfgPingEntry | not-accessible | current | This object indicates that the index of this table is hwVpnCfgPingIndex. |
| 1.3.6.1.4.1.2011.5.25.172.2.1.1.1 | ColumnhwVpnCfgPingIndex | not-accessible | current | This object indicates the index of an operation instance. |
| 1.3.6.1.4.1.2011.5.25.172.2.1.1.2 | ColumnhwVpnCfgPingPeerIpType | read-create | current | This object indicates the type of the peer IP address. It is used to identify the value type of hwVpnCfgPingPeerIp, which can be IPv4 or IPv6. |
| 1.3.6.1.4.1.2011.5.25.172.2.1.1.3 | ColumnhwVpnCfgPingPeerIp | read-create | current | This object indicates the peer IP address. |
| 1.3.6.1.4.1.2011.5.25.172.2.1.1.4 | ColumnhwVpnCfgPingVpnIdType | read-create | current | This object indicates the type of a VPN. It is used to identify the value type of hwVpnCfgPingVpnId, which can be VPLS or L3VPN. |
| 1.3.6.1.4.1.2011.5.25.172.2.1.1.5 | ColumnhwVpnCfgPingVpnId | read-create | current | This object indicates a VPN. The value is a string of characters. If the VPN is a VPLS, the value is displayed as VSI name; if the VPN is an L3VPN, the value i… |
| 1.3.6.1.4.1.2011.5.25.172.2.1.1.6 | ColumnhwVpnCfgPingPwId | read-create | current | This object indicates PW-ID. This value is set for the parameter only when the VPLS is in Martini mode. Otherwise, the value is 0. |
| 1.3.6.1.4.1.2011.5.25.172.2.1.1.7 | ColumnhwVpnCfgPingTunnelUsed | read-create | current | This object indicates the mode of forwarding request packets or response packets (such as tunnel forwarding). |
| 1.3.6.1.4.1.2011.5.25.172.2.1.1.8 | ColumnhwVpnCfgPingOperation | read-create | current | This object indicates two values: enable(1) and disable(2). enable(1) indicates that the operation instance is started; disable(2) indicates that the operation… |
| 1.3.6.1.4.1.2011.5.25.172.2.1.1.9 | ColumnhwVpnCfgPingResultDetail | read-only | current | This object indicates the result detail of ping operation. |
| 1.3.6.1.4.1.2011.5.25.172.2.1.1.10 | ColumnhwVpnCfgPingRowStatus | read-create | current | This object indicates the row status. |
| 1.3.6.1.4.1.2011.5.25.172.2.2 | TablehwVpnCfgPingResultTable | not-accessible | current | hwVpnCfgPingResultTable. |
| 1.3.6.1.4.1.2011.5.25.172.2.2.1 | RowhwVpnCfgPingResultEntry | not-accessible | current | This object indicates that indexes of this table are hwVpnCfgPingIndex and hwVpnCfgPingResultLocation. |
| 1.3.6.1.4.1.2011.5.25.172.2.2.1.1 | ColumnhwVpnCfgPingResultLocation | not-accessible | current | This object indicates two values: local(1) and remote(2). local(1) indicates configurations of the local end displayed in the probe result. remote(2) indicates… |
| 1.3.6.1.4.1.2011.5.25.172.2.2.1.2 | ColumnhwVpnCfgPingResultVpnIdType | read-only | current | This object indicates the type of a VPN. It is used to identify the value type of hwVpnCfgPingResultVpnId, which can be VPLS or L3VPN. |
| 1.3.6.1.4.1.2011.5.25.172.2.2.1.3 | ColumnhwVpnCfgPingResultVpnId | read-only | current | This object indicates a VPN. The value is a string of characters. If the VPN is in VPLS mode, the value is displayed as VSI name; if the VPN is in L3VPN mode, … |
| 1.3.6.1.4.1.2011.5.25.172.2.2.1.4 | ColumnhwVpnCfgPingResultDesc | read-only | current | This object indicates the description of the VPN. |
| 1.3.6.1.4.1.2011.5.25.172.2.2.1.5 | ColumnhwVpnCfgPingResultVpnAdminStatus | read-only | current | This object indicates the management status of the VPN: up(1), down(2), and unknown(255). |
| 1.3.6.1.4.1.2011.5.25.172.2.2.1.6 | ColumnhwVpnCfgPingResultOperStatus | read-only | current | This object indicates the operation status of the VPN: up(1), down(2), and unknown(255). |
| 1.3.6.1.4.1.2011.5.25.172.2.2.1.7 | ColumnhwVpnCfgPingResultMtu | read-only | current | This object indicates the MTU value. |
| 1.3.6.1.4.1.2011.5.25.172.2.2.1.8 | ColumnhwVpnCfgPingResultCeCount | read-only | current | This object indicates the number of CEs. |
| 1.3.6.1.4.1.2011.5.25.172.2.2.1.9 | ColumnhwVpnCfgPingResultActualIpType | read-only | current | This object indicates the type of the IP address of the PW on the local PE. It is used to identify the value type of hwVpnCfgPingResultActualIp. |
| 1.3.6.1.4.1.2011.5.25.172.2.2.1.10 | ColumnhwVpnCfgPingResultActualIp | read-only | current | This object indicates the IP address of the PW on the local PE. |
| 1.3.6.1.4.1.2011.5.25.172.2.2.1.11 | ColumnhwVpnCfgPingResultPeerIpType | read-only | current | This object indicates the type of the IP address of the PW on the peer PE. It is used to identify the value type of hwVpnCfgPingResultPeerIP. |
| 1.3.6.1.4.1.2011.5.25.172.2.2.1.12 | ColumnhwVpnCfgPingResultPeerIp | read-only | current | This object indicates the IP address of the PW on the peer PE. |
| 1.3.6.1.4.1.2011.5.25.172.2.2.1.13 | ColumnhwVpnCfgPingResultPwId | read-only | current | PWID. |
| 1.3.6.1.4.1.2011.5.25.172.2.2.1.14 | ColumnhwVpnCfgPingResultPeType | read-only | current | This object indicates the type of the PE (Whether the PE is an SPE.) |
| 1.3.6.1.4.1.2011.5.25.172.2.2.1.15 | ColumnhwVpnCfgPingResultVcType | read-only | current | This object indicates the type of the VC, which is either Ethernet or VLAN. |
| 1.3.6.1.4.1.2011.5.25.172.2.2.1.16 | ColumnhwVpnCfgPingResultLabelIn | read-only | current | This object indicates the incoming label of the interface at the PW side. |
| 1.3.6.1.4.1.2011.5.25.172.2.2.1.17 | ColumnhwVpnCfgPingResultLableOut | read-only | current | This object indicates the outgoing label of the interface at the PW side. |
| 1.3.6.1.4.1.2011.5.25.172.2.3 | NodehwVpnCfgPingGroups | |||
| 1.3.6.1.4.1.2011.5.25.172.2.3.1 | GrouphwVpnCfgPingGroup | current | hwVpnCfgPingGroup. | |
| 1.3.6.1.4.1.2011.5.25.172.2.3.2 | GrouphwVpnCfgPingResultGroup | current | hwVpnCfgPingResultGroup. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| MacOpType | INTEGER { populate(1), purge(2) } | current | Select test type |