HUAWEI-VSQMCBB-MIB
37 objects
This mib is used for defining VSQM statistic objects.
Imported Objects
| HUAWEI-MIB | huaweiUtility |
| SNMPv2-CONF | MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-SMI | Counter32 Integer32 IpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE private TimeTicks Unsigned32 |
| SNMPv2-TC | DisplayString RowStatus TEXTUAL-CONVENTION |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2011.6.160 | IdentityhwVsqm | This mib is used for defining VSQM statistic objects. | ||
| 1.3.6.1.4.1.2011.6.160.1 | NodehwVsqmObjects | |||
| 1.3.6.1.4.1.2011.6.160.1.1 | NodehwMonitorThresholdCfgTable | |||
| 1.3.6.1.4.1.2011.6.160.1.1.1 | ScalarhwMosThreshold | read-write | current | Indicates Mos Threshold. 0~50 indicate the voice quality. The Mos value is more, the voice quality is better. 127 indicate the invalid value. Default: 35 Unit:… |
| 1.3.6.1.4.1.2011.6.160.1.1.2 | ScalarhwJitterThreshold | read-write | current | Indicates the threshold of network jitter. Default: 60 Unit: millisecond |
| 1.3.6.1.4.1.2011.6.160.1.1.3 | ScalarhwPacketLossThreshold | read-write | current | Indicates the threshold of packet loss rate in the network. Default: 50 Unit: 1/1000 |
| 1.3.6.1.4.1.2011.6.160.1.1.4 | ScalarhwLoopDelayThreshold | read-write | current | Indicates the threshold of loop delay. Default: 400 Unit: millisecond |
| 1.3.6.1.4.1.2011.6.160.1.1.5 | ScalarhwPacketDiscardThreshold | read-write | current | Indicates the threshold of discard packets by JitterBuffer. Default: 1 Unit: 1/1000 |
| 1.3.6.1.4.1.2011.6.160.1.2 | NodehwThresholdMonitorCtrlTable | |||
| 1.3.6.1.4.1.2011.6.160.1.2.1 | ScalarhwThresholdMonitorTime | read-write | current | Indicates Threshold Monitor Time. 0 means never time out. Default: 1440 Unit: minute |
| 1.3.6.1.4.1.2011.6.160.1.2.2 | ScalarhwThresholdMonitorResidualTime | read-only | current | Indicates the residual time of the Threshold Monitor. -1 means the Threshold Monitor is disable. 0 means never time out. 1~604800: the residual time of the Thr… |
| 1.3.6.1.4.1.2011.6.160.1.2.3 | ScalarhwThresholdMonitorWorstHistoryAgingTime | read-write | current | Indicates the aging time of the Threshold Monitor. 1~90: the aging time of the Threshold Monitor. Default: 30 Unit: day |
| 1.3.6.1.4.1.2011.6.160.1.2.4 | ScalarhwThresholdMonitorSwitch | read-write | current | Indicates the Threshold Monitor Switch. Options: 1. enable(1) -enable the Threshold Monitor 2. disbale(2) -disable the Threshold Monitor Default: disbale(2) |
| 1.3.6.1.4.1.2011.6.160.1.3 | TablehwVsqmWorstHistoryStatisticQueryTable | not-accessible | current | This table is used to query VSQM worst history statistic. The indexes of this table are hwVsqmWorstHistoryStatisIfIndex, hwVsqmWorstHistoryStatisSeqNo. |
| 1.3.6.1.4.1.2011.6.160.1.3.1 | RowhwVsqmWorstHistoryStatisticQueryEntry | not-accessible | current | This table is used to query VSQM worst history statistic. The indexes of this entry are hwVsqmWorstHistoryStatisIfIndex, hwVsqmWorstHistoryStatisSeqNo. |
| 1.3.6.1.4.1.2011.6.160.1.3.1.1 | ColumnhwVsqmWorstHistoryStatisIfIndex | not-accessible | current | Indicates the shelf/slot/port index. |
| 1.3.6.1.4.1.2011.6.160.1.3.1.2 | ColumnhwVsqmWorstHistoryStatisSeqNo | not-accessible | current | Indicates the VSQM satatistic sequence num. |
| 1.3.6.1.4.1.2011.6.160.1.3.1.3 | ColumnhwVsqmWorstHistoryStatisMonitorSecHighSince1970 | read-only | current | Indicates the hight 32 bits of secconds since 1970. MonitorSecHighSince1970 and MonitorSecLowSince1970 all are 0xFFFFFFFF means invalid. |
| 1.3.6.1.4.1.2011.6.160.1.3.1.4 | ColumnhwVsqmWorstHistoryStatisMonitorSecLowSince1970 | read-only | current | Indicates the low 32 bits of secconds since 1970. MonitorSecHighSince1970 and MonitorSecLowSince1970 all are 0xFFFFFFFF means invalid. |
| 1.3.6.1.4.1.2011.6.160.1.3.1.5 | ColumnhwVsqmWorstHistoryStatisLocalIPAddress | read-only | current | Indicates the local IP address. 255.255.255.255 indicates invalid ip address. |
| 1.3.6.1.4.1.2011.6.160.1.3.1.6 | ColumnhwVsqmWorstHistoryStatisLocalUdpPort | read-only | current | Indicates the local UDP Port. |
| 1.3.6.1.4.1.2011.6.160.1.3.1.7 | ColumnhwVsqmWorstHistoryStatisRemoteIPAddress | read-only | current | Indicates the remote IP address. 255.255.255.255 indicates invalid IP address. |
| 1.3.6.1.4.1.2011.6.160.1.3.1.8 | ColumnhwVsqmWorstHistoryStatisRemoteUdpPort | read-only | current | Indicates the remote UDP Port. |
| 1.3.6.1.4.1.2011.6.160.1.3.1.9 | ColumnhwVsqmWorstHistoryStatisTotalRecivePacketNum | read-only | current | Indicates the total receive packet number. -1 indicates the invalid value. |
| 1.3.6.1.4.1.2011.6.160.1.3.1.10 | ColumnhwVsqmWorstHistoryStatisTotalSendPacketNum | read-only | current | Indicates the total send packet number. -1 indicates the invalid value. |
| 1.3.6.1.4.1.2011.6.160.1.3.1.11 | ColumnhwVsqmWorstHistoryStatisCurrentLoopDelay | read-only | current | Indicates the current Loop Delay. -1 indicates the invalid value. Unit: millisecond |
| 1.3.6.1.4.1.2011.6.160.1.3.1.12 | ColumnhwVsqmWorstHistoryStatisMeanLoopDelay | read-only | current | Indicates the current Loop Delay. -1 indicates the invalid value. Unit: millisecond |
| 1.3.6.1.4.1.2011.6.160.1.3.1.13 | ColumnhwVsqmWorstHistoryStatisCurrentJitter | read-only | current | Indicates the current Network Jitter. -1 indicates the invalid value. Unit: millisecond |
| 1.3.6.1.4.1.2011.6.160.1.3.1.14 | ColumnhwVsqmWorstHistoryStatisMeanJitter | read-only | current | Indicates the Mean Network Jitter. -1 indicates the invalid value. Unit: millisecond |
| 1.3.6.1.4.1.2011.6.160.1.3.1.15 | ColumnhwVsqmWorstHistoryStatisTotalPacketLossNum | read-only | current | Indicates the total Packet Loss Number. -1 indicates the invalid value. |
| 1.3.6.1.4.1.2011.6.160.1.3.1.16 | ColumnhwVsqmWorstHistoryStatisPacketLossRate | read-only | current | Indicates the Packet Loss Rate in the interval. -1 indicates the invalid value. Unit: 1/1000 |
| 1.3.6.1.4.1.2011.6.160.1.3.1.17 | ColumnhwVsqmWorstHistoryStatisLocSysDiscardPktNum | read-only | current | Indicates the total discard Packet Loss Number. -1 indicates the invalid value. |
| 1.3.6.1.4.1.2011.6.160.1.3.1.18 | ColumnhwVsqmWorstHistoryStatisLocDiscardRate | read-only | current | Indicates the discard Packet Loss Rate in the interval. -1 indicates the invalid value. Unit: 1/1000 |
| 1.3.6.1.4.1.2011.6.160.1.3.1.19 | ColumnhwVsqmWorstHistoryStatisCurrentMosLq | read-only | current | Indicates the Mos of listening quality in the interval. -1 indicates the invalid value. Unit: 1/10 |
| 1.3.6.1.4.1.2011.6.160.1.3.1.20 | ColumnhwVsqmWorstHistoryStatisCurrentMosCq | read-only | current | Indicates the Mos of conversational quality in the interval. -1: indicate the invalid value. Unit: 1/10 |
| 1.3.6.1.4.1.2011.6.160.1.3.1.21 | ColumnhwVsqmWorstHistoryStatisMeanMosCq | read-only | current | Indicates the Mean Mos of conversational quality in the whole talk. -1: indicate the invalid value. Unit: 1/10 |
| 1.3.6.1.4.1.2011.6.160.1.3.1.22 | ColumnhwVsqmWorstHistoryStatisRowStatus | read-write | current | Currently only destory(6) is valid. 1 -active(1) 2 -notInService(2) 3 -notReady(3) 4 -createAndGo(4) 5 -createAndWait(5) 6 -destory(6) |