HUAWEI-WLAN-AP-MIB
412 objects
V1.31, add hwApConfigInconsistWithActualTrap trap node.
Imported Objects
| HUAWEI-WLAN-MIB | hwWlan |
| SNMPv2-CONF | MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-SMI | Counter64 Integer32 IpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | DateAndTime MacAddress RowStatus |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2011.6.139.13 | IdentityhwWlanAp | V1.31, add hwApConfigInconsistWithActualTrap trap node. | ||
| 1.3.6.1.4.1.2011.6.139.13.1 | NodehwWlanApTrapInfo | |||
| 1.3.6.1.4.1.2011.6.139.13.1.1 | NodehwWlanApTrap | |||
| 1.3.6.1.4.1.2011.6.139.13.1.1.1 | NotificationhwApFaultTrap | current | The object indicates an AP communication fault alarm. | |
| 1.3.6.1.4.1.2011.6.139.13.1.1.2 | NotificationhwApNormalTrap | current | This object indicates an AP communication fault clear alarm. | |
| 1.3.6.1.4.1.2011.6.139.13.1.1.3 | NotificationhwApPingResultTrap | current | This object indicates an AP ping result alarm. | |
| 1.3.6.1.4.1.2011.6.139.13.1.1.4 | NotificationhwApConfigCommitTrap | current | This object indicates that the configuration of an AP is successfully committed. | |
| 1.3.6.1.4.1.2011.6.139.13.1.1.5 | NotificationhwUnAuthorizedApRecordExistTrap | current | This object indicates that unauthorized AP alarms exist. | |
| 1.3.6.1.4.1.2011.6.139.13.1.1.6 | NotificationhwUnAuthorizedApRecordClearTrap | current | This object indicates that unauthorized AP alarms are cleared. | |
| 1.3.6.1.4.1.2011.6.139.13.1.1.7 | NotificationhwApCpuOverloadTrap | current | This object indicates that the CPU usage of an AP exceeds the upper threshold. | |
| 1.3.6.1.4.1.2011.6.139.13.1.1.8 | NotificationhwApCpuOverloadRestoreTrap | current | This object indicates that an AP's CPU usage restores to the allowed range. | |
| 1.3.6.1.4.1.2011.6.139.13.1.1.9 | NotificationhwApMemoryOverloadTrap | current | This object indicates that the memory usage of an AP exceeds the upper threshold. | |
| 1.3.6.1.4.1.2011.6.139.13.1.1.10 | NotificationhwApMemoryOverloadRestoreTrap | current | This object indicates that the memory usage of an AP restores to the allowed range. | |
| 1.3.6.1.4.1.2011.6.139.13.1.1.11 | NotificationhwApStaFullTrap | current | This object indicates that new STAs cannot associate with an AP. | |
| 1.3.6.1.4.1.2011.6.139.13.1.1.12 | NotificationhwApStaFullRecoverTrap | current | This object indicates that new STAs can associate with an AP. | |
| 1.3.6.1.4.1.2011.6.139.13.1.1.13 | NotificationhwAcDevicesSwitchTrap | current | This object that an active/standby AC switchover occurs. | |
| 1.3.6.1.4.1.2011.6.139.13.1.1.14 | NotificationhwDyingGaspTrap | current | This object indicates a dying gasp alarm. | |
| 1.3.6.1.4.1.2011.6.139.13.1.1.15 | NotificationhwApFaultTrapFat | current | Description. | |
| 1.3.6.1.4.1.2011.6.139.13.1.1.16 | NotificationhwApNormalTrapFat | current | Description. | |
| 1.3.6.1.4.1.2011.6.139.13.1.1.17 | NotificationhwApTemperatureTooLowTrap | current | This object indicates that the temperature is too low. | |
| 1.3.6.1.4.1.2011.6.139.13.1.1.18 | NotificationhwApTemperatureTooLowRestoreTrap | current | This object indicates that the temperature restores to the normal range. | |
| 1.3.6.1.4.1.2011.6.139.13.1.1.19 | NotificationhwApTemperatureTooHighTrap | current | This object indicates that the temperature is too high. | |
| 1.3.6.1.4.1.2011.6.139.13.1.1.20 | NotificationhwApTemperatureTooHighRestoreTrap | current | This object indicates that the temperature restores to the normal range. | |
| 1.3.6.1.4.1.2011.6.139.13.1.1.21 | NotificationhwApOpticalRxPowerTooHighTrap | current | This object indicates that the receive power of an AP's optical module is too high. | |
| 1.3.6.1.4.1.2011.6.139.13.1.1.22 | NotificationhwApOpticalRxPowerTooHighRestoreTrap | current | This object indicates that the receive power of an AP's optical module restores to the normal range. | |
| 1.3.6.1.4.1.2011.6.139.13.1.1.23 | NotificationhwApOpticalRxPowerTooLowTrap | current | This object indicates that the receive power of an AP's optical module is too low. | |
| 1.3.6.1.4.1.2011.6.139.13.1.1.24 | NotificationhwApOpticalRxPowerTooLowRestoreTrap | current | This object indicates that the receive power of an AP's optical module restores to the normal range. | |
| 1.3.6.1.4.1.2011.6.139.13.1.1.25 | NotificationhwApOpticalTemperatureTooHighTrap | current | This object indicates that the temperature of an AP's optical module is too high. | |
| 1.3.6.1.4.1.2011.6.139.13.1.1.26 | NotificationhwApOpticalTemperatureTooHighRestoreTrap | current | This object indicates that the temperature of an AP's optical module restores to the normal range. | |
| 1.3.6.1.4.1.2011.6.139.13.1.1.27 | NotificationhwApOpticalTemperatureTooLowTrap | current | This object indicates that the temperature of an AP's optical module is too low. | |
| 1.3.6.1.4.1.2011.6.139.13.1.1.28 | NotificationhwApOpticalTemperatureTooLowRestoreTrap | current | This object indicates that the temperature of an AP's optical module restores to the normal range. | |
| 1.3.6.1.4.1.2011.6.139.13.1.1.29 | NotificationhwApNotSupportCountryCodeTrap | current | This object indicates that the country code is not supported. | |
| 1.3.6.1.4.1.2011.6.139.13.1.1.30 | NotificationhwApColdBootTrap | current | This object indicates a cold restart alarm. | |
| 1.3.6.1.4.1.2011.6.139.13.1.1.31 | NotificationhwApColdBootRestoreTrap | current | This object indicates a cold restart clear alarm. | |
| 1.3.6.1.4.1.2011.6.139.13.1.1.32 | NotificationhwApHotBootTrap | current | This object indicates a hot restart alarm. | |
| 1.3.6.1.4.1.2011.6.139.13.1.1.33 | NotificationhwApHotBootRestoreTrap | current | This object indicates a hot restart clear alarm. | |
| 1.3.6.1.4.1.2011.6.139.13.1.1.34 | NotificationhwApCRCTooHighTrap | current | This object indicates a CRC error alarm. | |
| 1.3.6.1.4.1.2011.6.139.13.1.1.35 | NotificationhwApCRCTooHighRestoreTrap | current | This object indicates that CRC error alarms are cleared. | |
| 1.3.6.1.4.1.2011.6.139.13.1.1.36 | NotificationhwApConflictApNameTrap | current | This object indicates an alarm of AP name conflict. | |
| 1.3.6.1.4.1.2011.6.139.13.1.1.37 | NotificationhwApLicenseTrap | current | This object indicates an AP license resource exhaustion alarm. | |
| 1.3.6.1.4.1.2011.6.139.13.1.1.38 | NotificationhwApFmeaIICFaultTrap | current | This object indicates an FMEA IIC fault alarm. | |
| 1.3.6.1.4.1.2011.6.139.13.1.1.39 | NotificationhwApFmeaIICFaultRestoreTrap | current | This object indicates that the FMEA IIC fault alarm is cleared. | |
| 1.3.6.1.4.1.2011.6.139.13.1.1.40 | NotificationhwApFmeaPHYFaultTrap | current | This object indicates an FMEA PHY fault alarm. | |
| 1.3.6.1.4.1.2011.6.139.13.1.1.41 | NotificationhwApFmeaPHYFaultRestoreTrap | current | This object indicates that the FMEA PHY fault alarm is cleared. | |
| 1.3.6.1.4.1.2011.6.139.13.1.1.42 | NotificationhwApFmeaFaultTrap | current | This object indicates an FMEA fault alarm. | |
| 1.3.6.1.4.1.2011.6.139.13.1.1.43 | NotificationhwApFmeaFaultRestoreTrap | current | This object indicates that the FMEA fault alarm is cleared. | |
| 1.3.6.1.4.1.2011.6.139.13.1.1.44 | NotificationhwApOpticalInsertTrap | current | This object indicates an alarm that is generated when an optical module is installed. | |
| 1.3.6.1.4.1.2011.6.139.13.1.1.45 | NotificationhwApOpticalRemoveTrap | current | This object indicates an alarm generated due to installation of an optical module is cleared. | |
| 1.3.6.1.4.1.2011.6.139.13.1.1.46 | NotificationhwApReceivedInvalidArpNewTrap | current | This object indicates that invalid ARP packets are received. | |
| 1.3.6.1.4.1.2011.6.139.13.1.1.47 | NotificationhwApVersionMismatchTrap | current | This object indicates that the AP version and the AC version do not match. | |
| 1.3.6.1.4.1.2011.6.139.13.1.1.48 | NotificationhwRadioUploadRemoteCaptureFileTrap | current | This object indicates the alarm on the remote capture result upload result. | |
| 1.3.6.1.4.1.2011.6.139.13.1.1.49 | NotificationhwMPJoinedOnEthernetTrap | current | Description. | |
| 1.3.6.1.4.1.2011.6.139.13.1.1.50 | NotificationhwMPJoinedOnEthernetRestoreTrap | current | Description. | |
| 1.3.6.1.4.1.2011.6.139.13.1.1.51 | NotificationhwMPPJoinedOnAirTrap | current | Description. | |
| 1.3.6.1.4.1.2011.6.139.13.1.1.52 | NotificationhwMPPJoinedOnAirRestoreTrap | current | Description. | |
| 1.3.6.1.4.1.2011.6.139.13.1.1.53 | NotificationhwApOpticalTxPowerTooHighTrap | current | Description. | |
| 1.3.6.1.4.1.2011.6.139.13.1.1.54 | NotificationhwApOpticalTxPowerTooHighRestoreTrap | current | Description. | |
| 1.3.6.1.4.1.2011.6.139.13.1.1.55 | NotificationhwApOpticalTxPowerTooLowTrap | current | Description. | |
| 1.3.6.1.4.1.2011.6.139.13.1.1.56 | NotificationhwApOpticalTxPowerTooLowRestoreTrap | current | Description. | |
| 1.3.6.1.4.1.2011.6.139.13.1.1.57 | NotificationhwApOnLineNumExceedCardSpecTrap | current | This object indicates the number of online APs on the card has exceeded the maximum value. | |
| 1.3.6.1.4.1.2011.6.139.13.1.1.58 | NotificationhwApFanInvalidTrap | current | This object indicates a complete failure of a fan. | |
| 1.3.6.1.4.1.2011.6.139.13.1.1.59 | NotificationhwApFanInvalidRestoreTrap | current | This object indicates that the complete failure of a fan has been rectified. | |
| 1.3.6.1.4.1.2011.6.139.13.1.1.60 | NotificationhwApStorageDevRemoveTrap | current | This object indicates that the storage card is removed. | |
| 1.3.6.1.4.1.2011.6.139.13.1.1.61 | NotificationhwApStorageDevInsertTrap | current | This object indicates that the storage card is installed. | |
| 1.3.6.1.4.1.2011.6.139.13.1.1.62 | NotificationhwApPoePowerOffTrap | current | This object indicates that a port is powered off. | |
| 1.3.6.1.4.1.2011.6.139.13.1.1.63 | NotificationhwApPoePowerOnTrap | current | This object indicates that a port is powered on. | |
| 1.3.6.1.4.1.2011.6.139.13.1.1.64 | NotificationhwApPoePdConnectedTrap | current | This object indicates that a port detects a PD connected to it. | |
| 1.3.6.1.4.1.2011.6.139.13.1.1.65 | NotificationhwApPoePdDisconnectedTrap | current | This object indicates that a port detects disconnection of the attached PD. | |
| 1.3.6.1.4.1.2011.6.139.13.1.1.66 | NotificationhwApPoePdClassOvercurrentTrap | current | This object indicates that a port detects a PD whose current exceeds the threshold of the corresponding class. | |
| 1.3.6.1.4.1.2011.6.139.13.1.1.67 | NotificationhwApPoePdPriorityDifferentTrap | current | This object indicates that the priority configured on a port is different from the PD priority. | |
| 1.3.6.1.4.1.2011.6.139.13.1.1.68 | NotificationhwApPoePowerOverUtilizationThresholdTrap | current | This object indicates that the load power of a PoE slot exceeds the upper limit. | |
| 1.3.6.1.4.1.2011.6.139.13.1.1.69 | NotificationhwApPoePowerOverUtilizationThresholdRestoreTrap | current | This object indicates that the load power of a PoE slot has fallen below the upper limit. | |
| 1.3.6.1.4.1.2011.6.139.13.1.1.70 | NotificationhwApSTPAutoShutdownTrap | current | This object indicates that STP detected a loop and shut down the port based on configuration. | |
| 1.3.6.1.4.1.2011.6.139.13.1.1.71 | NotificationhwApSTPAutoShutdownRestoreTrap | current | This object indicates that the shutdown port has recovered. | |
| 1.3.6.1.4.1.2011.6.139.13.1.1.72 | NotificationhwApOpticalInvalidTrap | current | This object indicates that the optical transceiver does not work normally. | |
| 1.3.6.1.4.1.2011.6.139.13.1.1.73 | NotificationhwApOpticalInvalidRestoreTrap | current | This object indicates that the optical transceiver has restored. | |
| 1.3.6.1.4.1.2011.6.139.13.1.1.74 | NotificationhwApVapStaFullTrap | current | This object indicates that new STAs cannot associate with an VAP. | |
| 1.3.6.1.4.1.2011.6.139.13.1.1.75 | NotificationhwVapStaFullRecoverTrap | current | This object indicates that new STAs can associate with an VAP. | |
| 1.3.6.1.4.1.2011.6.139.13.1.1.76 | NotificationhwWlanBLELowPowerTrap | current | Description. | |
| 1.3.6.1.4.1.2011.6.139.13.1.1.77 | NotificationhwWlanBLELowPowerRestoreTrap | current | Description. | |
| 1.3.6.1.4.1.2011.6.139.13.1.1.78 | NotificationhwWlanBLEOfflineTrap | current | Description. | |
| 1.3.6.1.4.1.2011.6.139.13.1.1.79 | NotificationhwWlanBLEOfflineRestoreTrap | current | Description. | |
| 1.3.6.1.4.1.2011.6.139.13.1.1.80 | NotificationhwWlanBLEFaultyTrap | current | Description. | |
| 1.3.6.1.4.1.2011.6.139.13.1.1.81 | NotificationhwWlanBLEFaultyRestoreTrap | current | Description. | |
| 1.3.6.1.4.1.2011.6.139.13.1.1.82 | NotificationhwAPIoTCardInsertTrap | current | Description. | |
| 1.3.6.1.4.1.2011.6.139.13.1.1.83 | NotificationhwAPIoTCardRemoveTrap | current | Description. | |
| 1.3.6.1.4.1.2011.6.139.13.1.1.84 | NotificationhwAPIoTServerStartFailTrap | current | Description. | |
| 1.3.6.1.4.1.2011.6.139.13.1.1.85 | NotificationhwAPIoTServerStartFailResumeTrap | current | Description. | |
| 1.3.6.1.4.1.2011.6.139.13.1.1.86 | NotificationhwWlanApSubFirmwareMismatchTrap | current | Description. | |
| 1.3.6.1.4.1.2011.6.139.13.1.1.87 | NotificationhwApSpecificConfigChangedTrap | current | Description. | |
| 1.3.6.1.4.1.2011.6.139.13.1.1.88 | NotificationhwApConfigInconsistWithActualTrap | current | This alarm is generated when a the AP config is inconsistent with the actual attribute. | |
| 1.3.6.1.4.1.2011.6.139.13.1.2 | NodehwWlanApTrapObjects | |||
| 1.3.6.1.4.1.2011.6.139.13.1.2.1 | ScalarhwWlanApActualType | read-only | current | Description. |
| 1.3.6.1.4.1.2011.6.139.13.1.2.2 | ScalarhwWlanApCpuOccupancyRate | read-only | current | Description. |
| 1.3.6.1.4.1.2011.6.139.13.1.2.3 | ScalarhwWlanApMemoryOccupancyRate | read-only | current | Description. |
| 1.3.6.1.4.1.2011.6.139.13.1.2.4 | ScalarhwWlanApPermitStaNum | read-only | current | Description. |
| 1.3.6.1.4.1.2011.6.139.13.1.2.5 | ScalarhwWlanStaAuthFailCause | read-only | current | Description. |
| 1.3.6.1.4.1.2011.6.139.13.1.2.6 | ScalarhwWlanAcSystemSwitchType | read-only | current | Description. |
| 1.3.6.1.4.1.2011.6.139.13.1.2.7 | ScalarhwWlanApOpticalRxPower | read-only | current | Description. |
| 1.3.6.1.4.1.2011.6.139.13.1.2.8 | ScalarhwWlanApOpticalTemperature | read-only | current | Description. |
| 1.3.6.1.4.1.2011.6.139.13.1.2.9 | ScalarhwWlanApCfgCountryCode | read-only | current | Description. |
| 1.3.6.1.4.1.2011.6.139.13.1.2.10 | ScalarhwWlanApArpAttackSrcMac | read-only | current | Description. |
| 1.3.6.1.4.1.2011.6.139.13.1.2.11 | ScalarhwWlanApArpAttackDstMac | read-only | current | Description. |
| 1.3.6.1.4.1.2011.6.139.13.1.2.12 | ScalarhwWlanApArpAttackSrcIP | read-only | current | Description. |
| 1.3.6.1.4.1.2011.6.139.13.1.2.13 | ScalarhwWlanApArpCfgRateThreshold | read-only | current | Description. |
| 1.3.6.1.4.1.2011.6.139.13.1.2.14 | ScalarhwWlanApArpActualRate | read-only | current | Description. |
| 1.3.6.1.4.1.2011.6.139.13.1.2.15 | ScalarhwWlanApNotifyRadioId | read-only | current | Description. |
| 1.3.6.1.4.1.2011.6.139.13.1.2.16 | ScalarhwWlanApNotifyOrRestoreTemperature | read-only | current | Description. |
| 1.3.6.1.4.1.2011.6.139.13.1.2.17 | ScalarhwWlanOccurTime | read-only | current | Description. |
| 1.3.6.1.4.1.2011.6.139.13.1.2.18 | ScalarhwWlanApBootNotifyName | read-only | current | Description. |
| 1.3.6.1.4.1.2011.6.139.13.1.2.19 | ScalarhwWlanApFaultTimes | read-only | current | Description. |
| 1.3.6.1.4.1.2011.6.139.13.1.2.20 | ScalarhwWlanApUnAuthorizedApRecordNumber | read-only | current | Description. |
| 1.3.6.1.4.1.2011.6.139.13.1.2.21 | ScalarhwWlanCrcErrActual | read-only | current | CRC error alarm threshold value.The unit is 1/10000. |
| 1.3.6.1.4.1.2011.6.139.13.1.2.22 | ScalarhwWlanCrcThreshold | read-only | current | Description. |
| 1.3.6.1.4.1.2011.6.139.13.1.2.23 | ScalarhwWlanApNotifyWlanId | read-only | current | Description. |
| 1.3.6.1.4.1.2011.6.139.13.1.2.24 | ScalarhwWlanApLicenseInfo | read-only | current | Description. |
| 1.3.6.1.4.1.2011.6.139.13.1.2.25 | ScalarhwWlanCrcPortType | read-only | current | Description. |
| 1.3.6.1.4.1.2011.6.139.13.1.2.26 | ScalarhwWlanCrcPortID | read-only | current | Description. |
| 1.3.6.1.4.1.2011.6.139.13.1.2.27 | ScalarhwWlanApArpAttackDropNum | read-only | current | Description. |
| 1.3.6.1.4.1.2011.6.139.13.1.2.28 | ScalarhwWlanApFaultID | read-only | current | This object indicates an FMEA fault alarm. |
| 1.3.6.1.4.1.2011.6.139.13.1.2.29 | ScalarhwWlanApIfIndex | read-only | current | Description. |
| 1.3.6.1.4.1.2011.6.139.13.1.2.30 | ScalarhwWlanApFaultInfo | read-only | current | Description. |
| 1.3.6.1.4.1.2011.6.139.13.1.2.31 | ScalarhwWlanApSoftWareVersion | read-only | current | Description. |
| 1.3.6.1.4.1.2011.6.139.13.1.2.32 | ScalarhwRadioUploadRemoteCaptureResult | read-only | current | Description. |
| 1.3.6.1.4.1.2011.6.139.13.1.2.33 | ScalarhwWlanApRadioID | read-only | current | Description. |
| 1.3.6.1.4.1.2011.6.139.13.1.2.34 | ScalarhwWlanApCpuOverloadDescInfo | read-only | current | Description. |
| 1.3.6.1.4.1.2011.6.139.13.1.2.35 | ScalarhwWlanApOpticalTxPower | read-only | current | Description. |
| 1.3.6.1.4.1.2011.6.139.13.1.2.36 | ScalarhwWlanSlotNum | read-only | current | Description. |
| 1.3.6.1.4.1.2011.6.139.13.1.2.37 | ScalarhwApPoePdPriority | accessible-for-notify | current | This object identifies the PD priority.The default value is low. |
| 1.3.6.1.4.1.2011.6.139.13.1.2.38 | ScalarhwApPoePortPriority | accessible-for-notify | current | This object identifies the priority of an interface.The default value is low. |
| 1.3.6.1.4.1.2011.6.139.13.1.2.39 | ScalarhwApPoeCurConsumPower | accessible-for-notify | current | This object identifies the current consuming power. |
| 1.3.6.1.4.1.2011.6.139.13.1.2.40 | ScalarhwApPoeConsumPowerThreshold | accessible-for-notify | current | This object identifies the threshold of consuming power. |
| 1.3.6.1.4.1.2011.6.139.13.1.2.41 | ScalarhwApFanIndex | accessible-for-notify | current | This object identifies the id of fan. |
| 1.3.6.1.4.1.2011.6.139.13.1.2.42 | ScalarhwApEntityPhysicalName | accessible-for-notify | current | This object identifies the phisical name of entity name. |
| 1.3.6.1.4.1.2011.6.139.13.1.2.43 | ScalarhwApStorageIndex | accessible-for-notify | current | This object identifies the id of Storage. |
| 1.3.6.1.4.1.2011.6.139.13.1.2.44 | ScalarhwApStorageName | accessible-for-notify | current | This object identifies the name of Storage. |
| 1.3.6.1.4.1.2011.6.139.13.1.2.45 | ScalarhwWlanApOpticalFaultID | accessible-for-notify | current | This object identifies the error corde of the optical transceiver fault. |
| 1.3.6.1.4.1.2011.6.139.13.1.2.46 | ScalarhwWlanApWlanID | read-only | current | This object identifies the Wlan Id of the Vap that has the max number of stations. |
| 1.3.6.1.4.1.2011.6.139.13.1.2.47 | ScalarhwWlanBLEMacAddr | read-only | current | Description. |
| 1.3.6.1.4.1.2011.6.139.13.1.2.48 | ScalarhwWlanApUdp | accessible-for-notify | current | Description. |
| 1.3.6.1.4.1.2011.6.139.13.1.2.49 | ScalarhwSubFirmwareName | accessible-for-notify | current | Description. |
| 1.3.6.1.4.1.2011.6.139.13.1.2.50 | ScalarhwSubFirmware | accessible-for-notify | current | Description. |
| 1.3.6.1.4.1.2011.6.139.13.1.2.51 | ScalarhwRealVersion | accessible-for-notify | current | Description. |
| 1.3.6.1.4.1.2011.6.139.13.1.2.52 | ScalarhwExpectVersion | accessible-for-notify | current | Description. |
| 1.3.6.1.4.1.2011.6.139.13.1.2.53 | ScalarhwWlanApIotCardId | accessible-for-notify | current | Description. |
| 1.3.6.1.4.1.2011.6.139.13.1.2.54 | ScalarhwPowerOffReason | accessible-for-notify | current | This object identifies the reason of power off. |
| 1.3.6.1.4.1.2011.6.139.13.1.2.55 | ScalarhwApSpecificChangeConfig | accessible-for-notify | current | This object identifies the config of change. |
| 1.3.6.1.4.1.2011.6.139.13.1.2.56 | ScalarhwApSpecificChangeReason | accessible-for-notify | current | This object identifies the reason of change config. |
| 1.3.6.1.4.1.2011.6.139.13.1.2.57 | ScalarhwApInconsisitConfig | accessible-for-notify | current | This object identifies the inconsistent config. |
| 1.3.6.1.4.1.2011.6.139.13.1.2.58 | ScalarhwApConfigInconsisitReason | accessible-for-notify | current | This object identifies the reason of inconsistent config. |
| 1.3.6.1.4.1.2011.6.139.13.2 | NodehwWlanApTypeObjects | |||
| 1.3.6.1.4.1.2011.6.139.13.2.1 | TablehwWlanApTypeTable | not-accessible | current | This table is used to query attributes based on AP types and restart APs based on AP types. |
| 1.3.6.1.4.1.2011.6.139.13.2.1.1 | RowhwWlanApTypeEntry | not-accessible | current | The index of this table is hwWlanApType. |
| 1.3.6.1.4.1.2011.6.139.13.2.1.1.1 | ColumnhwWlanApType | accessible-for-notify | current | This object indicates the AP type name. It is the index of the table. |
| 1.3.6.1.4.1.2011.6.139.13.2.1.1.2 | ColumnhwWlanApTypeDesc | read-only | current | This object indicates description of an AP type. |
| 1.3.6.1.4.1.2011.6.139.13.2.1.1.3 | ColumnhwWlanApTypeWiredPortNum | read-only | current | This object indicates the number of wired ports on APs of a certain type. |
| 1.3.6.1.4.1.2011.6.139.13.2.1.1.4 | ColumnhwWlanApTypeRadioNum | read-only | current | This object indicates the number of radios on APs of a certain type. |
| 1.3.6.1.4.1.2011.6.139.13.2.1.1.5 | ColumnhwWlanApTypeMaxStaNum | read-only | current | This object indicates the maximum number of access STAs on an AP of a certain type. |
| 1.3.6.1.4.1.2011.6.139.13.2.1.1.6 | ColumnhwWlanApTypeReset | read-write | current | This object indicates that APs are restarted based on the AP type. |
| 1.3.6.1.4.1.2011.6.139.13.2.2 | TablehwWlanApTypeRadioTable | not-accessible | current | This table is used to query radio-related attributes of APs of a certain type. |
| 1.3.6.1.4.1.2011.6.139.13.2.2.1 | RowhwWlanApTypeRadioEntry | not-accessible | current | The indexes of this table are hwWlanApType and hwWlanApTypeRadioIndex. |
| 1.3.6.1.4.1.2011.6.139.13.2.2.1.1 | ColumnhwWlanApTypeRadioIndex | not-accessible | current | This object indicates the radio index of APs of a certain type. |
| 1.3.6.1.4.1.2011.6.139.13.2.2.1.2 | ColumnhwWlanApTypeRadioType | read-only | current | This object indicates the radio type of APs of a certain type. |
| 1.3.6.1.4.1.2011.6.139.13.2.2.1.3 | ColumnhwWlanRadioMaxSpatialStreamsNum | read-only | current | This object indicates the maximum number of spatial streams of an AP radio. |
| 1.3.6.1.4.1.2011.6.139.13.2.2.1.4 | ColumnhwWlanApTypeRadioAntennaGain | read-only | current | This object indicates that the antenna gain is configured according to the radio ID. |
| 1.3.6.1.4.1.2011.6.139.13.2.2.1.5 | ColumnhwWlanApTypeRadioMaxVAPNum | read-only | current | Description. |
| 1.3.6.1.4.1.2011.6.139.13.2.3 | TablehwWlanApTypeWiredPortTable | not-accessible | current | This table is used to query wired interface attributes of APs of a certain type. |
| 1.3.6.1.4.1.2011.6.139.13.2.3.1 | RowhwWlanApTypeWiredPortEntry | not-accessible | current | The indexes of this table are hwWlanApType and hwWlanApTypeWiredPortIndex. |
| 1.3.6.1.4.1.2011.6.139.13.2.3.1.1 | ColumnhwWlanApTypeWiredPortIndex | not-accessible | current | This object indicates the index of an AP's wired interface. Numbering rule: port-index = port-type * 100 + port-number. For example, the indexes of a wall plat… |
| 1.3.6.1.4.1.2011.6.139.13.2.3.1.2 | ColumnhwWlanApTypeWiredPortType | read-only | current | This object indicates the type of an AP's wired interface. |
| 1.3.6.1.4.1.2011.6.139.13.2.3.1.3 | ColumnhwWlanApTypeWiredPortName | read-only | current | This object indicates the name of a wired interface on APs of a certain type, for example, ethernet 0, ethernet 1, gigabit-ethernet 0, and eth-trunk 0. |
| 1.3.6.1.4.1.2011.6.139.13.3 | NodehwWlanApObjects | |||
| 1.3.6.1.4.1.2011.6.139.13.3.1 | NodehwWlanApPing | |||
| 1.3.6.1.4.1.2011.6.139.13.3.1.1 | ScalarhwWlanApPingApMac | read-write | current | This object specifies the MAC address in an AP ping operation. If the AP ID and MAC address are specified concurrently, the AP is pinged based on the MAC addre… |
| 1.3.6.1.4.1.2011.6.139.13.3.1.2 | ScalarhwWlanApPingAddress | read-write | current | This object indicates the domain name or IP address of the destination host. |
| 1.3.6.1.4.1.2011.6.139.13.3.1.3 | ScalarhwWlanApPingCount | read-write | current | This object indicates the number of times ICMP ECHO-REQUEST packets are sent.Default value: 4. |
| 1.3.6.1.4.1.2011.6.139.13.3.1.4 | ScalarhwWlanApPingPacketSize | read-write | current | This object indicates the length of an ECHO-REQUE. |
| 1.3.6.1.4.1.2011.6.139.13.3.1.5 | ScalarhwWlanApPingWaitTime | read-write | current | This object indicates the time to wait before sending the next ICMP Request packet.Unit: ms Default value: 2000. |
| 1.3.6.1.4.1.2011.6.139.13.3.1.6 | ScalarhwWlanApPingTimeOut | read-write | current | This object indicates the timeout period for an ECHO-RESPONSE after an ECHO-REQUEST is sent.Unit: ms Default value: 2000. |
| 1.3.6.1.4.1.2011.6.139.13.3.1.7 | ScalarhwWlanApPingResultSuccessCount | read-only | current | This object indicates the number of successful AP ping operations. Only the result of the latest AP ping operation is kept. |
| 1.3.6.1.4.1.2011.6.139.13.3.1.8 | ScalarhwWlanApPingResultFailureCount | read-only | current | This object indicates the number of AP ping operation failures. Only the result of the latest AP ping operation is kept. |
| 1.3.6.1.4.1.2011.6.139.13.3.1.9 | ScalarhwWlanApPingResultAveResponseTime | read-only | current | This object indicates the average response time for an AP ping operation. Only the result of the latest AP ping operation is kept.Unit: ms. |
| 1.3.6.1.4.1.2011.6.139.13.3.1.10 | ScalarhwWlanApPingResultMinResponseTime | read-only | current | This object indicates the minimum response time for an AP ping operation. Only the result of the latest AP ping operation is kept.Unit: ms. |
| 1.3.6.1.4.1.2011.6.139.13.3.1.11 | ScalarhwWlanApPingResultMaxResponseTime | read-only | current | This object indicates the maximum response time for an AP ping operation. Only the result of the latest AP ping operation is kept.Unit: ms. |
| 1.3.6.1.4.1.2011.6.139.13.3.1.12 | ScalarhwWlanApPingResultFlag | read-only | current | This object indicates the result of the AP ping operation. |
| 1.3.6.1.4.1.2011.6.139.13.3.2 | TablehwWlanUnauthedApRecordTable | not-accessible | current | This table describes rogue AP records. Rogue APs are those whose MAC addresses and SNs are not in the whitelist and not confirmed after being discovered by the… |
| 1.3.6.1.4.1.2011.6.139.13.3.2.1 | RowhwWlanUnauthedApRecordEntry | not-accessible | current | The index of this table is hwWlanUnauthedApRecordIndex. |
| 1.3.6.1.4.1.2011.6.139.13.3.2.1.1 | ColumnhwWlanUnauthedApRecordIndex | not-accessible | current | This object indicates the index of a rogue AP record. |
| 1.3.6.1.4.1.2011.6.139.13.3.2.1.2 | ColumnhwWlanUnauthedApType | read-only | current | This object indicates the type of a rogue AP. |
| 1.3.6.1.4.1.2011.6.139.13.3.2.1.3 | ColumnhwWlanUnauthedApMacAddress | read-only | current | This object indicates the type of a rogue AP. |
| 1.3.6.1.4.1.2011.6.139.13.3.2.1.4 | ColumnhwWlanUnauthedApSn | read-only | current | This object indicates the SN of a rogue AP. |
| 1.3.6.1.4.1.2011.6.139.13.3.2.1.5 | ColumnhwWlanUnauthedApIpAddress | read-only | current | This object indicates the IP address of a rogue AP. |
| 1.3.6.1.4.1.2011.6.139.13.3.2.1.6 | ColumnhwWlanUnauthedApRecordTime | read-only | current | This object indicates the time when a rogue AP is recorded. |
| 1.3.6.1.4.1.2011.6.139.13.3.3 | TablehwWlanApTable | not-accessible | current | This table is used to add, delete, modify, reset, or confirm APs. You can also use the table to query the configuration and restore factory settings of APs. |
| 1.3.6.1.4.1.2011.6.139.13.3.3.1 | RowhwWlanApEntry | not-accessible | current | The index of this table is hwWlanApMac. |
| 1.3.6.1.4.1.2011.6.139.13.3.3.1.1 | ColumnhwWlanApMac | accessible-for-notify | current | This object indicates the MAC address of an AP. |
| 1.3.6.1.4.1.2011.6.139.13.3.3.1.2 | ColumnhwWlanApSn | read-only | current | This object indicates the sequence number (SN) of an AP. |
| 1.3.6.1.4.1.2011.6.139.13.3.3.1.3 | ColumnhwWlanApTypeInfo | read-only | current | This object indicates the AP type. |
| 1.3.6.1.4.1.2011.6.139.13.3.3.1.4 | ColumnhwWlanApName | read-write | current | This object indicates the AP name. |
| 1.3.6.1.4.1.2011.6.139.13.3.3.1.5 | ColumnhwWlanApGroup | read-write | current | This object indicates the group to which an AP belongs. |
| 1.3.6.1.4.1.2011.6.139.13.3.3.1.6 | ColumnhwWlanApRunState | read-only | current | This object indicates the AP state. |
| 1.3.6.1.4.1.2011.6.139.13.3.3.1.7 | ColumnhwWlanApSoftwareVersion | read-only | current | This object indicates the AP software version. |
| 1.3.6.1.4.1.2011.6.139.13.3.3.1.8 | ColumnhwWlanApHardwareVersion | read-only | current | This object indicates the AP hardware version. |
| 1.3.6.1.4.1.2011.6.139.13.3.3.1.9 | ColumnhwWlanApCpuType | read-only | current | This object indicates the CPU type of an AP. |
| 1.3.6.1.4.1.2011.6.139.13.3.3.1.10 | ColumnhwWlanApCpufrequency | read-only | current | This object indicates the CPU frequency of an AP.Unit: MHz. |
| 1.3.6.1.4.1.2011.6.139.13.3.3.1.11 | ColumnhwWlanApMemoryType | read-only | current | This object indicates the memory type of an AP. |
| 1.3.6.1.4.1.2011.6.139.13.3.3.1.12 | ColumnhwWlanApDomain | read-only | current | This object indicates the AP domain. |
| 1.3.6.1.4.1.2011.6.139.13.3.3.1.13 | ColumnhwWlanApIpAddress | read-only | current | This object indicates the IP address of an AP. |
| 1.3.6.1.4.1.2011.6.139.13.3.3.1.14 | ColumnhwWlanApIpNetMask | read-only | current | This object indicates the IP address mask of an AP. |
| 1.3.6.1.4.1.2011.6.139.13.3.3.1.15 | ColumnhwWlanApGatewayIp | read-only | current | This object indicates the gateway IP address of an AP. |
| 1.3.6.1.4.1.2011.6.139.13.3.3.1.16 | ColumnhwWlanApMemorySize | read-only | current | This object indicates the memory size of an AP.Unit: MB. |
| 1.3.6.1.4.1.2011.6.139.13.3.3.1.17 | ColumnhwWlanApFlashSize | read-only | current | This object indicates the flash memory size of an AP.Unit: MB. |
| 1.3.6.1.4.1.2011.6.139.13.3.3.1.18 | ColumnhwWlanApRunTime | read-only | current | This object indicates the running time of an AP.Unit: tick. |
| 1.3.6.1.4.1.2011.6.139.13.3.3.1.19 | ColumnhwWlanApAdminOper | read-create | current | This object indicates administrative status of an AP. |
| 1.3.6.1.4.1.2011.6.139.13.3.3.1.20 | ColumnhwWlanApDNS | read-only | current | This object indicates the AP DNS. |
| 1.3.6.1.4.1.2011.6.139.13.3.3.1.21 | ColumnhwWlanApOnlineTime | read-only | current | This object indicates online duration of an AP. |
| 1.3.6.1.4.1.2011.6.139.13.3.3.1.22 | ColumnhwWlanApSysSoftwareDesc | read-only | current | This object indicates system software description of an AP. |
| 1.3.6.1.4.1.2011.6.139.13.3.3.1.23 | ColumnhwWlanApSysHardtwareDesc | read-only | current | This object indicates system hardware description of an AP. |
| 1.3.6.1.4.1.2011.6.139.13.3.3.1.24 | ColumnhwWlanApSysManufacture | read-only | current | This object indicates the manufacturer of an AP. |
| 1.3.6.1.4.1.2011.6.139.13.3.3.1.25 | ColumnhwWlanApSysSoftwareName | read-only | current | This object indicates software name of an AP. |
| 1.3.6.1.4.1.2011.6.139.13.3.3.1.26 | ColumnhwWlanApSysSoftwareVendor | read-only | current | This object indicates the manufacturer of the AP software. |
| 1.3.6.1.4.1.2011.6.139.13.3.3.1.27 | ColumnhwWlanApBomCode | read-only | current | This object indicates the BOM code. |
| 1.3.6.1.4.1.2011.6.139.13.3.3.1.28 | ColumnhwWlanApIpv6Address | read-only | current | This object indicates the IPv6 address. |
| 1.3.6.1.4.1.2011.6.139.13.3.3.1.29 | ColumnhwWlanApIpv6NetMask | read-only | current | This object indicates the IPv6 address mask. |
| 1.3.6.1.4.1.2011.6.139.13.3.3.1.30 | ColumnhwWlanApGatewayIpv6 | read-only | current | This object indicates the IPv6 gateway. |
| 1.3.6.1.4.1.2011.6.139.13.3.3.1.31 | ColumnhwWlanApIpv6DNS | read-only | current | This object indicates the IPv6 DNS. |
| 1.3.6.1.4.1.2011.6.139.13.3.3.1.32 | ColumnhwWlanApProtectAcIPv6Addr | read-only | current | This object indicates the IPv6 address of the standby AC. |
| 1.3.6.1.4.1.2011.6.139.13.3.3.1.33 | ColumnhwWlanApBootCountTotal | read-only | current | This object indicates the total number of times an AP is restarted. |
| 1.3.6.1.4.1.2011.6.139.13.3.3.1.34 | ColumnhwWlanApBootCountPowerOff | read-only | current | This object indicates the number of times an AP is restarted due to a power failure. |
| 1.3.6.1.4.1.2011.6.139.13.3.3.1.35 | ColumnhwWlanApBootCountClear | read-create | current | This object clears the AP restart count. |
| 1.3.6.1.4.1.2011.6.139.13.3.3.1.36 | ColumnhwWlanApElectronicLabel | read-only | current | This object indicates the electronic label of an AP. |
| 1.3.6.1.4.1.2011.6.139.13.3.3.1.37 | ColumnhwWlanApWiredPortNum | read-only | current | This object indicates the total number of wired interfaces. |
| 1.3.6.1.4.1.2011.6.139.13.3.3.1.38 | ColumnhwWlanApWiredPortMtu | read-only | current | This object indicates the maximum transmit unit (MTU) of a wired interface. |
| 1.3.6.1.4.1.2011.6.139.13.3.3.1.39 | ColumnhwWlanApWiredPortMac | read-only | current | This object indicates the MAC address of a wired interface. |
| 1.3.6.1.4.1.2011.6.139.13.3.3.1.40 | ColumnhwWlanApMemoryUseRate | read-only | current | This object indicates the memory usage.Unit: %. |
| 1.3.6.1.4.1.2011.6.139.13.3.3.1.41 | ColumnhwWlanApCpuUseRate | read-only | current | This object indicates the CPU usage.Unit: %. |
| 1.3.6.1.4.1.2011.6.139.13.3.3.1.42 | ColumnhwWlanApFlashFreeSize | read-only | current | This object indicates available space in the flash memory.Unit: KB. |
| 1.3.6.1.4.1.2011.6.139.13.3.3.1.43 | ColumnhwWlanApTemperature | read-only | current | This object indicates the operating temperature. |
| 1.3.6.1.4.1.2011.6.139.13.3.3.1.44 | ColumnhwWlanApOnlineUserNum | read-only | current | This object indicates the number of online users. |
| 1.3.6.1.4.1.2011.6.139.13.3.3.1.45 | ColumnhwWlanApDualBandAssoc5gStaNum | read-only | current | This object indicates the number of dual-band terminals that access the 5 GHz radio. |
| 1.3.6.1.4.1.2011.6.139.13.3.3.1.46 | ColumnhwWlanApDualBandStaNum | read-only | current | This object indicates the number of STAs that support dual frequency bands. |
| 1.3.6.1.4.1.2011.6.139.13.3.3.1.47 | ColumnhwWlanApStaOnlineFailRatio | read-only | current | This object indicates STA online failure ratio on an AP. |
| 1.3.6.1.4.1.2011.6.139.13.3.3.1.48 | ColumnhwWlanApStaOfflineRatio | read-only | current | This object indicates STA offline ratio of an AP. |
| 1.3.6.1.4.1.2011.6.139.13.3.3.1.49 | ColumnhwWlanApStickyClientRatio | read-only | current | This object indicates the proportion of sticky STAs to all STAs. |
| 1.3.6.1.4.1.2011.6.139.13.3.3.1.50 | ColumnhwWlanApUpEthPortSpeed | read-only | current | This object indicates the rate of an upstream Ethernet interface. |
| 1.3.6.1.4.1.2011.6.139.13.3.3.1.51 | ColumnhwWlanApUpEthPortSpeedMode | read-only | current | This object indicates the rate mode of an upstream Ethernet interface. |
| 1.3.6.1.4.1.2011.6.139.13.3.3.1.52 | ColumnhwWlanApUpEthPortDuplex | read-only | current | This object indicates the duplex state of an upstream Ethernet interface. |
| 1.3.6.1.4.1.2011.6.139.13.3.3.1.53 | ColumnhwWlanApUpEthPortDuplexMode | read-only | current | This object indicates the duplex mode of an upstream Ethernet interface. |
| 1.3.6.1.4.1.2011.6.139.13.3.3.1.54 | ColumnhwWlanApUpPortSpeed | read-only | current | This object indicates the real-time rate of an upstream interface.Unit: Kbps. |
| 1.3.6.1.4.1.2011.6.139.13.3.3.1.55 | ColumnhwWlanAPUpPortPER | read-only | current | This object indicates the packet error rate of an upstream interface. |
| 1.3.6.1.4.1.2011.6.139.13.3.3.1.56 | ColumnhwWlanEthportUpRate | read-only | current | This object indicates the upstream rate of an Ethernet interface. |
| 1.3.6.1.4.1.2011.6.139.13.3.3.1.57 | ColumnhwWlanEthportDownRate | read-only | current | This object indicates the downstream rate of an Ethernet interface. |
| 1.3.6.1.4.1.2011.6.139.13.3.3.1.58 | ColumnhwWlanApAirportUpTraffic | read-only | current | This object indicates the traffic volume on an upstream wireless interface.Unit: bytes. The value is reported in 64 bits. |
| 1.3.6.1.4.1.2011.6.139.13.3.3.1.59 | ColumnhwWlanApAirportDwTraffic | read-only | current | This object indicates the traffic volume on a downstream wireless interface.Unit: bytes. The value is reported in 64 bits. |
| 1.3.6.1.4.1.2011.6.139.13.3.3.1.60 | ColumnhwWlanApEthportDwTraffic | read-only | current | This object indicates the traffic volume on a downstream wired interface.Unit: bytes. The value is reported in 64 bits. |
| 1.3.6.1.4.1.2011.6.139.13.3.3.1.61 | ColumnhwWlanApEthportUpTraffic | read-only | current | This object indicates the traffic volume on an upstream wired interface.Unit: bytes. The value is reported in 64 bits. |
| 1.3.6.1.4.1.2011.6.139.13.3.3.1.62 | ColumnhwWlanApUpPortRecvPackets | read-only | current | This object indicates the total number of frames received on an upstream interface, which is extended to 64 bits. |
| 1.3.6.1.4.1.2011.6.139.13.3.3.1.63 | ColumnhwWlanApUpPortSendPackets | read-only | current | This object indicates the total number of frames sent on an upstream interface, which is extended to 64 bits. |
| 1.3.6.1.4.1.2011.6.139.13.3.3.1.64 | ColumnhwWlanApRowstatus | read-create | current | This object indicates the row status. |
| 1.3.6.1.4.1.2011.6.139.13.3.3.1.65 | ColumnhwWlanApUpPortRecvBytes | read-only | current | This object indicates the total number of bytes received on an upstream interface. |
| 1.3.6.1.4.1.2011.6.139.13.3.3.1.66 | ColumnhwWlanApUpPortSendBytes | read-only | current | This object indicates the total number of bytes sent on an upstream interface. |
| 1.3.6.1.4.1.2011.6.139.13.3.3.1.67 | ColumnhwWlanApId | read-only | current | Ap ID. |
| 1.3.6.1.4.1.2011.6.139.13.3.3.1.68 | ColumnhwWlanCentralApId | read-only | current | This object indicates the central AP ID. |
| 1.3.6.1.4.1.2011.6.139.13.3.3.1.69 | ColumnhwWlanCentralApMac | read-only | current | This object indicates the MAC address of an central AP. |
| 1.3.6.1.4.1.2011.6.139.13.3.3.1.70 | ColumnhwWlanCentralApName | read-only | current | This object indicates the central AP name. |
| 1.3.6.1.4.1.2011.6.139.13.3.3.1.71 | ColumnhwWlanApSDCardSize | read-only | current | This object indicates the SD card size of an AP.Unit: MB. |
| 1.3.6.1.4.1.2011.6.139.13.3.3.1.72 | ColumnhwWlanAPLongitude | read-only | current | This object indicates the longitude of an AP. |
| 1.3.6.1.4.1.2011.6.139.13.3.3.1.73 | ColumnhwWlanAPLatitude | read-only | current | This object indicates the latitude of an AP. |
| 1.3.6.1.4.1.2011.6.139.13.3.4 | TablehwWlanApWiredPortTable | not-accessible | current | This table describes AP wired interfaces and is used to query attributes of the wired interfaces. |
| 1.3.6.1.4.1.2011.6.139.13.3.4.1 | RowhwWlanApWiredPortEntry | not-accessible | current | The index of this table is hwWlanApMac and hwWlanApWiredPortIndex. |
| 1.3.6.1.4.1.2011.6.139.13.3.4.1.1 | ColumnhwWlanApWiredPortIndex | not-accessible | current | This object indicates the index of an AP's wired interface. |
| 1.3.6.1.4.1.2011.6.139.13.3.4.1.2 | ColumnhwWlanApWiredPortType | read-only | current | This object indicates the type of an AP's wired interface. |
| 1.3.6.1.4.1.2011.6.139.13.3.4.1.3 | ColumnhwWlanApWiredPortDesc | read-only | current | This object indicates description of an AP's wired interface. |
| 1.3.6.1.4.1.2011.6.139.13.3.4.1.4 | ColumnhwWlanApWiredPortState | read-only | current | This object indicates status of an AP's wired interface. |
| 1.3.6.1.4.1.2011.6.139.13.3.4.1.5 | ColumnhwWlanApWiredPortSpeed | read-only | current | This object indicates the rate of an AP's wired interface. |
| 1.3.6.1.4.1.2011.6.139.13.3.4.1.6 | ColumnhwWlanApMultiWiredPortDuplex | read-only | current | This object indicates the duplex state of an AP's wired interface. |
| 1.3.6.1.4.1.2011.6.139.13.3.4.1.7 | ColumnhwWlanApMultiWiredPortNegotiation | read-only | current | This object indicates the auto-negotiation mode of an AP's wired interface. |
| 1.3.6.1.4.1.2011.6.139.13.3.4.1.8 | ColumnhwWlanApMultiWiredPortMode | read-only | current | This object indicates the working mode of an AP's wired interface.Default value: null. |
| 1.3.6.1.4.1.2011.6.139.13.3.4.1.9 | ColumnhwWlanApWiredPortApId | read-only | current | This object indicates the AP ID. |
| 1.3.6.1.4.1.2011.6.139.13.3.4.1.10 | ColumnhwWlanApWiredPortApName | read-only | current | This object indicates the AP name. |
| 1.3.6.1.4.1.2011.6.139.13.3.5 | TablehwWlanApWiredPortStatTable | not-accessible | current | This table is used to query or clear statistics on AP wired interfaces. |
| 1.3.6.1.4.1.2011.6.139.13.3.5.1 | RowhwWlanApWiredPortStatEntry | not-accessible | current | The indexes of this table are hwWlanApMac and hwWlanApWiredPortIndex. |
| 1.3.6.1.4.1.2011.6.139.13.3.5.1.1 | ColumnhwWlanApWiredPortStatClear | read-write | current | This object clears interface statistics. |
| 1.3.6.1.4.1.2011.6.139.13.3.5.1.2 | ColumnhwWlanApWiredPortUpDwnTimes | read-only | current | This object indicates the number of times an AP's wired interface alternates between Up and Down. |
| 1.3.6.1.4.1.2011.6.139.13.3.5.1.3 | ColumnhwWlanApWiredPortInPkts | read-only | current | This object indicates the total number of frames received on an AP's wired interface. |
| 1.3.6.1.4.1.2011.6.139.13.3.5.1.4 | ColumnhwWlanApWiredPortInUnicastPkts | read-only | current | This object indicates the number of unicast frames received on an AP's wired interface. |
| 1.3.6.1.4.1.2011.6.139.13.3.5.1.5 | ColumnhwWlanApWiredPortInNonUnicastPkts | read-only | current | This object indicates the number of non-unicast frames received on an AP's wired interface. |
| 1.3.6.1.4.1.2011.6.139.13.3.5.1.6 | ColumnhwWlanApWiredPortInBytes | read-only | current | This object indicates the number of bytes received on an AP's wired interface. |
| 1.3.6.1.4.1.2011.6.139.13.3.5.1.7 | ColumnhwWlanApWiredPortInErrorPkts | read-only | current | This object indicates the number of error frames received on an AP's wired interface. |
| 1.3.6.1.4.1.2011.6.139.13.3.5.1.8 | ColumnhwWlanApWiredPortInDiscardPkts | read-only | current | This object indicates the number of dropped frames received on an AP's wired interface. |
| 1.3.6.1.4.1.2011.6.139.13.3.5.1.9 | ColumnhwWlanApWiredPortOutPkts | read-only | current | This object indicates the total number of frames sent on an AP's wired interface. |
| 1.3.6.1.4.1.2011.6.139.13.3.5.1.10 | ColumnhwWlanApWiredPortOutUnicastPkts | read-only | current | This object indicates the number of unicast frames sent on an AP's wired interface. |
| 1.3.6.1.4.1.2011.6.139.13.3.5.1.11 | ColumnhwWlanApWiredPortOutNonUnicastPkts | read-only | current | This object indicates the number of non-unicast frames sent on an AP's wired interface. |
| 1.3.6.1.4.1.2011.6.139.13.3.5.1.12 | ColumnhwWlanApWiredPortOutBytes | read-only | current | This object indicates the number of bytes sent on an AP's wired interface. |
| 1.3.6.1.4.1.2011.6.139.13.3.5.1.13 | ColumnhwWlanApWiredPortOutErrorsPkts | read-only | current | This object indicates the number of error packets sent on an AP's wired interface. |
| 1.3.6.1.4.1.2011.6.139.13.3.5.1.14 | ColumnhwWlanApWiredPortOutDiscardPkts | read-only | current | This object indicates the number of dropped packets sent on an AP's wired interface. |
| 1.3.6.1.4.1.2011.6.139.13.3.6 | TablehwWlanApWiredPortLldpTable | not-accessible | current | This table is used to query LLDP neighbor information of a specified AP. No entry can be created, modified, or deleted in this table. |
| 1.3.6.1.4.1.2011.6.139.13.3.6.1 | RowhwWlanApWiredPortLldpEntry | not-accessible | current | The indexes of this table are hwWlanApMac, hwWlanApWiredPortLldpRemLocalPortNum, and hwWlanApWiredPortLldpRemIndex. |
| 1.3.6.1.4.1.2011.6.139.13.3.6.1.1 | ColumnhwWlanApWiredPortLldpRemLocalPortNum | not-accessible | current | This object indicates the local port number of the remote neighbor of the AP's wired interface. |
| 1.3.6.1.4.1.2011.6.139.13.3.6.1.2 | ColumnhwWlanApWiredPortLldpRemIndex | not-accessible | current | This object indicates the index of the remote neighbor interface of the AP's wired interface. |
| 1.3.6.1.4.1.2011.6.139.13.3.6.1.3 | ColumnhwWlanApWiredPortLldpRemChassisIdSubtype | read-only | current | This object indicates the subtype of the remote neighbor of the AP's wired interface. |
| 1.3.6.1.4.1.2011.6.139.13.3.6.1.4 | ColumnhwWlanApWiredPortLldpRemChassisId | read-only | current | This object indicates the subtype ID of the remote neighbor of the AP's wired interface. |
| 1.3.6.1.4.1.2011.6.139.13.3.6.1.5 | ColumnhwWlanApWiredPortLldpRemPortIdSubtype | read-only | current | This object indicates the subtype of the remote neighbor interface of the AP's wired interface. |
| 1.3.6.1.4.1.2011.6.139.13.3.6.1.6 | ColumnhwWlanApWiredPortLldpRemPortId | read-only | current | This object indicates the ID of the remote neighbor interface of the AP's wired interface. |
| 1.3.6.1.4.1.2011.6.139.13.3.6.1.7 | ColumnhwWlanApWiredPortLldpRemPortDesc | read-only | current | This object indicates descriptions about the remote neighbor interface of the AP's wired interface. |
| 1.3.6.1.4.1.2011.6.139.13.3.6.1.8 | ColumnhwWlanApWiredPortLldpRemSysName | read-only | current | This object indicates the system name of the remote neighbor of the AP's wired interface. |
| 1.3.6.1.4.1.2011.6.139.13.3.6.1.9 | ColumnhwWlanApWiredPortLldpRemSysDesc | read-only | current | This object indicates system descriptions about the remote neighbor of the AP's wired interface. |
| 1.3.6.1.4.1.2011.6.139.13.3.6.1.10 | ColumnhwWlanApWiredPortLldpRemSysCapSupported | read-only | current | This object indicates whether the remote neighbor of the AP's wired interface supports the system capability. |
| 1.3.6.1.4.1.2011.6.139.13.3.6.1.11 | ColumnhwWlanApWiredPortLldpRemSysCapEnabled | read-only | current | This object enables the system capability of the remote neighbor of the AP's wired interface. |
| 1.3.6.1.4.1.2011.6.139.13.3.6.1.12 | ColumnhwWlanApWiredPortLldpRemLocalApId | read-only | current | Description. |
| 1.3.6.1.4.1.2011.6.139.13.3.7 | TablehwWlanApWiredPortLldpRemManAddrTable | not-accessible | current | This table is used to query management addresses of LLDP neighbors of a specified AP. No entry can be created, modified, or deleted in this table. |
| 1.3.6.1.4.1.2011.6.139.13.3.7.1 | RowhwWlanApWiredPortLldpRemManAddrEntry | not-accessible | current | The indexes of this table are hwWlanApMac, hwWlanApWiredPortLldpRemLocalPortNum, hwWlanApWiredPortLldpRemIndex, hwWlanApWiredPortLldpRemManAddrSubtype, and hwW… |
| 1.3.6.1.4.1.2011.6.139.13.3.7.1.1 | ColumnhwWlanApWiredPortLldpRemManAddrSubtype | not-accessible | current | This object indicates the This object indicates the remote management address subtype of the wired interface. |
| 1.3.6.1.4.1.2011.6.139.13.3.7.1.2 | ColumnhwWlanApWiredPortLldpRemManAddr | not-accessible | current | This object indicates the remote management address of the wired interface. |
| 1.3.6.1.4.1.2011.6.139.13.3.7.1.3 | ColumnhwWlanApWiredPortLldpRemManAddrIfSubtype | read-only | current | This object indicates the interface subtype of the remote management address of the wired interface. |
| 1.3.6.1.4.1.2011.6.139.13.3.7.1.4 | ColumnhwWlanApWiredPortLldpRemManAddrIfId | read-only | current | This object indicates the interface ID of the remote management address of the wired interface. |
| 1.3.6.1.4.1.2011.6.139.13.3.7.1.5 | ColumnhwWlanApWiredPortLldpRemManAddrOID | read-only | current | This object indicates the remote management address OID of the wired interface. |
| 1.3.6.1.4.1.2011.6.139.13.3.8 | TablehwWlanApOnlineFailTable | not-accessible | current | This table is used to query or clear AP online failure records, including failure time and reason. |
| 1.3.6.1.4.1.2011.6.139.13.3.8.1 | RowhwWlanApOnlineFailEntry | not-accessible | current | The index of this table is hwWlanApOnlineFailMac. |
| 1.3.6.1.4.1.2011.6.139.13.3.8.1.1 | ColumnhwWlanApOnlineFailMac | not-accessible | current | This object indicates the MAC address of the STA who fails to go online. |
| 1.3.6.1.4.1.2011.6.139.13.3.8.1.2 | ColumnhwWlanApOnlineFailTime | read-only | current | This object indicates the latest time when the STA fails to go online. |
| 1.3.6.1.4.1.2011.6.139.13.3.8.1.3 | ColumnhwWlanApOnlineFailReason | read-only | current | This object indicates the reason for the latest STA online failure. |
| 1.3.6.1.4.1.2011.6.139.13.3.8.1.4 | ColumnhwWlanApOnlineFailRowStatus | read-write | current | This object indicates that online failure records of STAs are deleted based on MAC addresses. |
| 1.3.6.1.4.1.2011.6.139.13.3.9 | TablehwWlanApOfflineTable | not-accessible | current | This table is used to query or clear AP offline records, including offline time and reason. |
| 1.3.6.1.4.1.2011.6.139.13.3.9.1 | RowhwWlanApOfflineEntry | not-accessible | current | The index of this table is hwWlanApOfflineMac. |
| 1.3.6.1.4.1.2011.6.139.13.3.9.1.1 | ColumnhwWlanApOfflineMac | not-accessible | current | This object indicates the MAC address of an AP. |
| 1.3.6.1.4.1.2011.6.139.13.3.9.1.2 | ColumnhwWlanApOfflineTime | read-only | current | This object indicates the AP offline time. |
| 1.3.6.1.4.1.2011.6.139.13.3.9.1.3 | ColumnhwWlanApOfflineReason | read-only | current | This object indicates the AP offline reason. |
| 1.3.6.1.4.1.2011.6.139.13.3.9.1.4 | ColumnhwWlanApOfflineRowStatus | read-create | current | This object clears AP offline records. |
| 1.3.6.1.4.1.2011.6.139.13.3.10 | TablehwWlanIDIndexedApTable | not-accessible | current | This table is used to add, delete, modify, reset, or confirm APs. You can also use the table to query the configuration and restore factory settings of APs. |
| 1.3.6.1.4.1.2011.6.139.13.3.10.1 | RowhwWlanIDIndexedApEntry | not-accessible | current | The index of this table is hwWlanIDIndexedApId. |
| 1.3.6.1.4.1.2011.6.139.13.3.10.1.1 | ColumnhwWlanIDIndexedApId | accessible-for-notify | current | Ap ID. |
| 1.3.6.1.4.1.2011.6.139.13.3.10.1.2 | ColumnhwWlanIDIndexedApMac | read-write | current | This object indicates the MAC address of an AP. |
| 1.3.6.1.4.1.2011.6.139.13.3.10.1.3 | ColumnhwWlanIDIndexedApSn | read-write | current | This object indicates the sequence number (SN) of an AP. |
| 1.3.6.1.4.1.2011.6.139.13.3.10.1.4 | ColumnhwWlanIDIndexedApTypeInfo | read-write | current | This object indicates the AP type. |
| 1.3.6.1.4.1.2011.6.139.13.3.10.1.5 | ColumnhwWlanIDIndexedApName | read-write | current | This object indicates the AP name. |
| 1.3.6.1.4.1.2011.6.139.13.3.10.1.6 | ColumnhwWlanIDIndexedApGroup | read-write | current | This object indicates the group to which an AP belongs. |
| 1.3.6.1.4.1.2011.6.139.13.3.10.1.7 | ColumnhwWlanIDIndexedApRunState | read-only | current | This object indicates the AP state. |
| 1.3.6.1.4.1.2011.6.139.13.3.10.1.8 | ColumnhwWlanIDIndexedApSoftwareVersion | read-only | current | This object indicates the AP software version. |
| 1.3.6.1.4.1.2011.6.139.13.3.10.1.9 | ColumnhwWlanIDIndexedApHardwareVersion | read-only | current | This object indicates the AP hardware version. |
| 1.3.6.1.4.1.2011.6.139.13.3.10.1.10 | ColumnhwWlanIDIndexedApCpuType | read-only | current | This object indicates the CPU type of an AP. |
| 1.3.6.1.4.1.2011.6.139.13.3.10.1.11 | ColumnhwWlanIDIndexedApCpufrequency | read-only | current | This object indicates the CPU frequency of an AP.Unit: MHz. |
| 1.3.6.1.4.1.2011.6.139.13.3.10.1.12 | ColumnhwWlanIDIndexedApMemoryType | read-only | current | This object indicates the memory type of an AP. |
| 1.3.6.1.4.1.2011.6.139.13.3.10.1.13 | ColumnhwWlanIDIndexedApDomain | read-only | current | This object indicates the AP domain. |
| 1.3.6.1.4.1.2011.6.139.13.3.10.1.14 | ColumnhwWlanIDIndexedApIpAddress | read-only | current | This object indicates the IP address of an AP. |
| 1.3.6.1.4.1.2011.6.139.13.3.10.1.15 | ColumnhwWlanIDIndexedApIpNetMask | read-only | current | This object indicates the IP address mask of an AP. |
| 1.3.6.1.4.1.2011.6.139.13.3.10.1.16 | ColumnhwWlanIDIndexedApGatewayIp | read-only | current | This object indicates the gateway IP address of an AP. |
| 1.3.6.1.4.1.2011.6.139.13.3.10.1.17 | ColumnhwWlanIDIndexedApMemorySize | read-only | current | This object indicates the memory size of an AP.Unit: MB. |
| 1.3.6.1.4.1.2011.6.139.13.3.10.1.18 | ColumnhwWlanIDIndexedApFlashSize | read-only | current | This object indicates the flash memory size of an AP.Unit: MB. |
| 1.3.6.1.4.1.2011.6.139.13.3.10.1.19 | ColumnhwWlanIDIndexedApRunTime | read-only | current | This object indicates the running time of an AP.Unit: tick. |
| 1.3.6.1.4.1.2011.6.139.13.3.10.1.20 | ColumnhwWlanIDIndexedApAdminOper | read-create | current | This object indicates administrative status of an AP. |
| 1.3.6.1.4.1.2011.6.139.13.3.10.1.21 | ColumnhwWlanIDIndexedApDNS | read-only | current | This object indicates the AP DNS. |
| 1.3.6.1.4.1.2011.6.139.13.3.10.1.22 | ColumnhwWlanIDIndexedApOnlineTime | read-only | current | This object indicates online duration of an AP. |
| 1.3.6.1.4.1.2011.6.139.13.3.10.1.23 | ColumnhwWlanIDIndexedApSysSoftwareDesc | read-only | current | This object indicates system software description of an AP. |
| 1.3.6.1.4.1.2011.6.139.13.3.10.1.24 | ColumnhwWlanIDIndexedApSysHardtwareDesc | read-only | current | This object indicates system hardware description of an AP. |
| 1.3.6.1.4.1.2011.6.139.13.3.10.1.25 | ColumnhwWlanIDIndexedApSysManufacture | read-only | current | This object indicates the manufacturer of an AP. |
| 1.3.6.1.4.1.2011.6.139.13.3.10.1.26 | ColumnhwWlanIDIndexedApSysSoftwareName | read-only | current | This object indicates software name of an AP. |
| 1.3.6.1.4.1.2011.6.139.13.3.10.1.27 | ColumnhwWlanIDIndexedApSysSoftwareVendor | read-only | current | This object indicates the manufacturer of the AP software. |
| 1.3.6.1.4.1.2011.6.139.13.3.10.1.28 | ColumnhwWlanIDIndexedApBomCode | read-only | current | This object indicates the BOM code. |
| 1.3.6.1.4.1.2011.6.139.13.3.10.1.29 | ColumnhwWlanIDIndexedApIpv6Address | read-only | current | This object indicates the IPv6 address. |
| 1.3.6.1.4.1.2011.6.139.13.3.10.1.30 | ColumnhwWlanIDIndexedApIpv6NetMask | read-only | current | This object indicates the IPv6 address mask. |
| 1.3.6.1.4.1.2011.6.139.13.3.10.1.31 | ColumnhwWlanIDIndexedApGatewayIpv6 | read-only | current | This object indicates the IPv6 gateway. |
| 1.3.6.1.4.1.2011.6.139.13.3.10.1.32 | ColumnhwWlanIDIndexedApIpv6DNS | read-only | current | This object indicates the IPv6 DNS. |
| 1.3.6.1.4.1.2011.6.139.13.3.10.1.33 | ColumnhwWlanIDIndexedApProtectAcIPv6Addr | read-only | current | This object indicates the IPv6 address of the standby AC. |
| 1.3.6.1.4.1.2011.6.139.13.3.10.1.34 | ColumnhwWlanIDIndexedApBootCountTotal | read-only | current | This object indicates the total number of times an AP is restarted. |
| 1.3.6.1.4.1.2011.6.139.13.3.10.1.35 | ColumnhwWlanIDIndexedApBootCountPowerOff | read-only | current | This object indicates the number of times an AP is restarted due to a power failure. |
| 1.3.6.1.4.1.2011.6.139.13.3.10.1.36 | ColumnhwWlanIDIndexedApBootCountClear | read-create | current | This object clears the AP restart count. |
| 1.3.6.1.4.1.2011.6.139.13.3.10.1.37 | ColumnhwWlanIDIndexedApElectronicLabel | read-only | current | This object indicates the electronic label of an AP. |
| 1.3.6.1.4.1.2011.6.139.13.3.10.1.38 | ColumnhwWlanIDIndexedApWiredPortNum | read-only | current | This object indicates the total number of wired interfaces. |
| 1.3.6.1.4.1.2011.6.139.13.3.10.1.39 | ColumnhwWlanIDIndexedApWiredPortMtu | read-only | current | This object indicates the maximum transmit unit (MTU) of a wired interface. |
| 1.3.6.1.4.1.2011.6.139.13.3.10.1.40 | ColumnhwWlanIDIndexedApWiredPortMac | read-only | current | This object indicates the MAC address of a wired interface. |
| 1.3.6.1.4.1.2011.6.139.13.3.10.1.41 | ColumnhwWlanIDIndexedApMemoryUseRate | read-only | current | This object indicates the memory usage.Unit: %. |
| 1.3.6.1.4.1.2011.6.139.13.3.10.1.42 | ColumnhwWlanIDIndexedApCpuUseRate | read-only | current | This object indicates the CPU usage.Unit: %. |
| 1.3.6.1.4.1.2011.6.139.13.3.10.1.43 | ColumnhwWlanIDIndexedApFlashFreeSize | read-only | current | This object indicates available space in the flash memory.Unit: KB. |
| 1.3.6.1.4.1.2011.6.139.13.3.10.1.44 | ColumnhwWlanIDIndexedApTemperature | read-only | current | This object indicates the operating temperature. |
| 1.3.6.1.4.1.2011.6.139.13.3.10.1.45 | ColumnhwWlanIDIndexedApOnlineUserNum | read-only | current | This object indicates the number of online users. |
| 1.3.6.1.4.1.2011.6.139.13.3.10.1.46 | ColumnhwWlanIDIndexedApDualBandAssoc5gStaNum | read-only | current | This object indicates the number of dual-band terminals that access the 5 GHz radio. |
| 1.3.6.1.4.1.2011.6.139.13.3.10.1.47 | ColumnhwWlanIDIndexedApDualBandStaNum | read-only | current | This object indicates the number of STAs that support dual frequency bands. |
| 1.3.6.1.4.1.2011.6.139.13.3.10.1.48 | ColumnhwWlanIDIndexedApStaOnlineFailRatio | read-only | current | This object indicates STA online failure ratio on an AP. |
| 1.3.6.1.4.1.2011.6.139.13.3.10.1.49 | ColumnhwWlanIDIndexedApStaOfflineRatio | read-only | current | This object indicates STA offline ratio of an AP. |
| 1.3.6.1.4.1.2011.6.139.13.3.10.1.50 | ColumnhwWlanIDIndexedApStickyClientRatio | read-only | current | This object indicates the proportion of sticky STAs to all STAs. |
| 1.3.6.1.4.1.2011.6.139.13.3.10.1.51 | ColumnhwWlanIDIndexedApUpEthPortSpeed | read-only | current | This object indicates the rate of an upstream Ethernet interface. |
| 1.3.6.1.4.1.2011.6.139.13.3.10.1.52 | ColumnhwWlanIDIndexedApUpEthPortSpeedMode | read-only | current | This object indicates the rate mode of an upstream Ethernet interface. |
| 1.3.6.1.4.1.2011.6.139.13.3.10.1.53 | ColumnhwWlanIDIndexedApUpEthPortDuplex | read-only | current | This object indicates the duplex state of an upstream Ethernet interface. |
| 1.3.6.1.4.1.2011.6.139.13.3.10.1.54 | ColumnhwWlanIDIndexedApUpEthPortDuplexMode | read-only | current | This object indicates the duplex mode of an upstream Ethernet interface. |
| 1.3.6.1.4.1.2011.6.139.13.3.10.1.55 | ColumnhwWlanIDIndexedApUpPortSpeed | read-only | current | This object indicates the real-time rate of an upstream interface.Unit: Kbps. |
| 1.3.6.1.4.1.2011.6.139.13.3.10.1.56 | ColumnhwWlanIDIndexedAPUpPortPER | read-only | current | This object indicates the packet error rate of an upstream interface. |
| 1.3.6.1.4.1.2011.6.139.13.3.10.1.57 | ColumnhwWlanIDIndexedEthportUpRate | read-only | current | This object indicates the upstream rate of an Ethernet interface. |
| 1.3.6.1.4.1.2011.6.139.13.3.10.1.58 | ColumnhwWlanIDIndexedEthportDownRate | read-only | current | This object indicates the downstream rate of an Ethernet interface. |
| 1.3.6.1.4.1.2011.6.139.13.3.10.1.59 | ColumnhwWlanIDIndexedApAirportUpTraffic | read-only | current | This object indicates the traffic volume on an upstream wireless interface.Unit: bytes. The value is reported in 64 bits. |
| 1.3.6.1.4.1.2011.6.139.13.3.10.1.60 | ColumnhwWlanIDIndexedApAirportDwTraffic | read-only | current | This object indicates the traffic volume on a downstream wireless interface.Unit: bytes. The value is reported in 64 bits. |
| 1.3.6.1.4.1.2011.6.139.13.3.10.1.61 | ColumnhwWlanIDIndexedApEthportDwTraffic | read-only | current | This object indicates the traffic volume on a downstream wired interface.Unit: bytes. The value is reported in 64 bits. |
| 1.3.6.1.4.1.2011.6.139.13.3.10.1.62 | ColumnhwWlanIDIndexedApEthportUpTraffic | read-only | current | This object indicates the traffic volume on an upstream wired interface.Unit: bytes. The value is reported in 64 bits. |
| 1.3.6.1.4.1.2011.6.139.13.3.10.1.63 | ColumnhwWlanIDIndexedApUpPortRecvPackets | read-only | current | This object indicates the total number of frames received on an upstream interface, which is extended to 64 bits. |
| 1.3.6.1.4.1.2011.6.139.13.3.10.1.64 | ColumnhwWlanIDIndexedApUpPortSendPackets | read-only | current | This object indicates the total number of frames sent on an upstream interface, which is extended to 64 bits. |
| 1.3.6.1.4.1.2011.6.139.13.3.10.1.65 | ColumnhwWlanIDIndexedApUpPortRecvBytes | read-only | current | This object indicates the total number of bytes received on an upstream interface. |
| 1.3.6.1.4.1.2011.6.139.13.3.10.1.66 | ColumnhwWlanIDIndexedApUpPortSendBytes | read-only | current | This object indicates the total number of bytes sent on an upstream interface. |
| 1.3.6.1.4.1.2011.6.139.13.3.10.1.67 | ColumnhwWlanIDIndexedCentralApId | read-only | current | This object indicates the central AP ID. |
| 1.3.6.1.4.1.2011.6.139.13.3.10.1.68 | ColumnhwWlanIDIndexedCentralApMac | read-only | current | This object indicates the MAC address of an central AP. |
| 1.3.6.1.4.1.2011.6.139.13.3.10.1.69 | ColumnhwWlanIDIndexedCentralApName | read-only | current | This object indicates the central AP name. |
| 1.3.6.1.4.1.2011.6.139.13.3.10.1.70 | ColumnhwWlanIDIndexedApRowstatus | read-create | current | This object indicates the row status. |
| 1.3.6.1.4.1.2011.6.139.13.3.10.1.71 | ColumnhwWlanIDIndexedApSDCardSize | read-only | current | This object indicates the SD card size of an AP.Unit: MB. |
| 1.3.6.1.4.1.2011.6.139.13.3.10.1.72 | ColumnhwWlanIDIndexedAPLongitude | read-only | current | This object indicates the longitude of an AP. |
| 1.3.6.1.4.1.2011.6.139.13.3.10.1.73 | ColumnhwWlanIDIndexedAPLatitude | read-only | current | This object indicates the latitude of an AP. |
| 1.3.6.1.4.1.2011.6.139.13.4 | NodehwWlanAPConformance | |||
| 1.3.6.1.4.1.2011.6.139.13.4.1 | NodehwWlanAPCompliances | |||
| 1.3.6.1.4.1.2011.6.139.13.4.1.1 | CompliancehwWlanAPCompliance | current | Description. | |
| 1.3.6.1.4.1.2011.6.139.13.4.2 | NodehwWlanAPObjectGroups | |||
| 1.3.6.1.4.1.2011.6.139.13.4.2.1 | GrouphwWlanApTrapGroup | current | Description. | |
| 1.3.6.1.4.1.2011.6.139.13.4.2.2 | GrouphwWlanApTrapObjectsGroup | current | Description. | |
| 1.3.6.1.4.1.2011.6.139.13.4.2.3 | GrouphwWlanApTypeGroup | current | Description. | |
| 1.3.6.1.4.1.2011.6.139.13.4.2.4 | GrouphwWlanApInfoGroup | current | Description. |