HUAWEI-XPON-MIB
1529 objects
The MIB module defines MIB objects which provides GPON and EPON management NMS interfaces.
Imported Objects
| HUAWEI-MIB | huaweiMgmt huaweiUtility |
| IF-MIB | ifIndex |
| RMON-MIB | EntryStatus OwnerString |
| SNMP-FRAMEWORK-MIB | SnmpAdminString |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | Counter32 Counter64 Gauge32 Integer32 IpAddress mib-2 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32 zeroDotZero |
| SNMPv2-TC | DateAndTime MacAddress RowStatus TEXTUAL-CONVENTION TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2011.6.128 | IdentityhwXponDeviceMIB | value | The MIB module defines MIB objects which provides GPON and EPON management NMS interfaces. | |
| 1.3.6.1.4.1.2011.6.128.1 | NodehwXponDeviceObjectMIB | |||
| 1.3.6.1.4.1.2011.6.128.1.1 | NodehwXponDeviceObjects | |||
| 1.3.6.1.4.1.2011.6.128.1.1.1 | NodehwXponDeviceGlobalObjects | |||
| 1.3.6.1.4.1.2011.6.128.1.1.1.1 | ScalarhwXponDeviceAutoFindOntAge | read-write | current | The aging time of the auto-found ONT, which can be 0s (indicating that the ONT will not aging) or a value from 100s to 300s. |
| 1.3.6.1.4.1.2011.6.128.1.1.1.2 | ScalarhwXponDeviceAutoFindInterval | read-write | current | Indicates the SN request interval, ranging from 1(s) to 10(s). |
| 1.3.6.1.4.1.2011.6.128.1.1.1.3 | ScalarhwXponDeviceModeCfgSwitch | read-write | current | This object is used to change XPON management mode. When xpon mode is changed from profile mode to distributing mode and there are xpon data or xpon board info… |
| 1.3.6.1.4.1.2011.6.128.1.1.1.21 | ScalarhwGponDeviceMulticastGemportId | read-write | current | The special GEM port ID is used for the multicast service, ranging from 4000 to 4095. |
| 1.3.6.1.4.1.2011.6.128.1.1.1.22 | ScalarhwGponDeviceBaseGemportId | read-write | current | The base GEM port is used when the board's car-mode is port-cos, ranging from 128 to 3872. |
| 1.3.6.1.4.1.2011.6.128.1.1.1.23 | ScalarhwGponDeviceMinimumBandwidth | read-only | current | The scalar is used to configure the minimum bandwidth of the T-CONTs in the system, ranging from 384 to 1024. |
| 1.3.6.1.4.1.2011.6.128.1.1.1.24 | ScalarhwXponDeviceAutoDetectRogueOntNew | read-write | current | This object is used to open or close the switch of rogue ONT automatic detection. Options: 1.on(1) - Open the switch of rogue ONT automatic detection 2.off(2) … |
| 1.3.6.1.4.1.2011.6.128.1.1.1.25 | ScalarhwGponDeviceDbaBandwidthType | read-write | current | This object is used to select the type of bandwidth. Options: 1.gpon(1) - Indicates that the type of bandwidth is GPON 2.ethernet(2) - Indicates that the type … |
| 1.3.6.1.4.1.2011.6.128.1.1.1.26 | ScalarhwGponDeviceDbaAssignmentMode | read-write | current | This object is used to select the DBA assignment mode. Options: 1.maxbandwidthusage(1) - Indicates that the usage of bandwidth is maximum 2.minloopdelay(2) - I… |
| 1.3.6.1.4.1.2011.6.128.1.1.1.41 | ScalarhwEponDeviceCtcOuiId | read-write | current | This object is used to set the Organizationally Unique Identifier. |
| 1.3.6.1.4.1.2011.6.128.1.1.1.42 | ScalarhwEponDeviceChangePasswordIntervalTime | read-write | current | The interval time of ONT's password renew, ranging from 1(s) to 254(s). |
| 1.3.6.1.4.1.2011.6.128.1.1.2 | NodehwXponDeviceControlObjects | |||
| 1.3.6.1.4.1.2011.6.128.1.1.2.21 | TablehwGponDeviceOltControlInfoTable | not-accessible | current | The control table of the GPON OLT. The index of this table is ifIndex. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.21.1 | RowhwGponDeviceOltControlInfoEntry | not-accessible | current | The control table of the GPON OLT. The index of this entry is ifIndex. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.21.1.1 | ColumnhwGponDeviceOltControlNearest | read-write | current | This is the fiber distance between the OLT and the nearest ONT. For GPON, the fiber distance between the OLT and the nearest ONT is 0 km to 40 km while the max… |
| 1.3.6.1.4.1.2011.6.128.1.1.2.21.1.2 | ColumnhwGponDeviceOltControlFarthest | read-write | current | This is the fiber distance between the OLT and the farthest ONT. For GPON, the fiber distance between the OLT and the nearest ONT is 0 km to 60 km while the ma… |
| 1.3.6.1.4.1.2011.6.128.1.1.2.21.1.3 | ColumnhwGponDeviceOltControlDnFecEnabled | read-write | current | This object indicates the downstream FEC switch. Options: 1. enable(1) - Enable the downstream FEC switch 2. disable(2) - Disable the downstream FEC switch 3. … |
| 1.3.6.1.4.1.2011.6.128.1.1.2.21.1.4 | ColumnhwGponDeviceOltControlAutofindOntEnable | read-write | current | This object indicates the ONT auto find switch. Options: 1. enable(1) - Enable the ONT auto find switch 2. disable(2) - Disable the ONT auto find switch 3. inv… |
| 1.3.6.1.4.1.2011.6.128.1.1.2.21.1.5 | ColumnhwGponDeviceOltControlChangePasswordAge | read-write | current | This object indicates the ONT password update period. 0 means no update, range: 0 or 5~1440 minutes. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.21.1.6 | ColumnhwGponDeviceOltControlDespt | read-write | current | This object indicates the description of GPON port. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.21.1.7 | ColumnhwGponDeviceOltControlLeftBandWidth | read-only | current | This object indicates the untapped bandwidth of the port. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.21.1.8 | ColumnhwGponDeviceOltControlMinBandwidth | read-write | current | This object indicates the minimum bandwidth of T-CONTs in the OLT port. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.21.1.9 | ColumnhwGponDeviceOltControlLaserSwitch | read-write | current | This object indicates the laser switch of the GPON port. Options: 1. on(1) - Open the laser switch of the GPON port 2. off(2) - Close the laser switch of the G… |
| 1.3.6.1.4.1.2011.6.128.1.1.2.21.1.10 | ColumnhwGponDeviceOltControlStatus | read-only | current | This object indicates the GPON port status in the OLT. Options: 1. up(1) - Indicates that the GPON port is normal 2. down(2) - Indicates that the GPON port is … |
| 1.3.6.1.4.1.2011.6.128.1.1.2.21.1.11 | ColumnhwGponDeviceOltControlManualDetectRogueOnt | read-write | current | This object indicates the switch of the rogue ONT manual detection. Options: 1. startup(1) - Start up the switch of the rogue ONT manual detection 2. invalid(-… |
| 1.3.6.1.4.1.2011.6.128.1.1.2.21.1.12 | ColumnhwGponDeviceOltControlIlegalIncurRogueOntExt | read-only | current | This object is used to query whether there are Illegal incursionary rogue ONTs under port. Options: 1. inexistent(0) - Indicates that there are not Illegal inc… |
| 1.3.6.1.4.1.2011.6.128.1.1.2.21.1.13 | ColumnhwGponDeviceOltControlOpticModuleStatus | read-only | current | This object indicates the optical module status on GPON port. Options: 1. online(1) - Indicates that the optical module is online 2. offline(2) - Indicates tha… |
| 1.3.6.1.4.1.2011.6.128.1.1.2.21.1.14 | ColumnhwGponDeviceOltControlAvailableBandWidth | read-only | current | This object indicates the available bandwidth of the port. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.21.1.15 | ColumnhwGponDeviceOltObjectOpticAlarmProfileName | read-write | current | This object indicates the name of the optical alarm profile that is bound to the port. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.21.1.16 | ColumnhwGponDeviceOltControlOntNum | read-only | current | This object indicates the number of ONTs that are added to the port. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.21.1.17 | ColumnhwGponDeviceOltLastUpTime | read-only | current | This object indicates the time when the port last went online. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.21.1.18 | ColumnhwGponDeviceOltLastDownTime | read-only | current | This object indicates the time when the port last went offline. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.21.1.19 | ColumnhwGponDeviceOltLastDownCause | read-only | current | This object indicates the reason why the port last went offline. Options: 1. los(1) - Loss of signal 2. opticModuleAbsence(2) - The optic module is absence 3. … |
| 1.3.6.1.4.1.2011.6.128.1.1.2.21.1.20 | ColumnhwGponDeviceOltControlTcontNumCombined | read-only | current | The number of the combined T-CONTs. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.21.1.21 | ColumnhwGponDeviceOltControlTcontNumInCard | read-only | current | The number of T-CONTs in the card. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.21.1.22 | ColumnhwGponDeviceOltControlEnergySavingFlag | read-only | current | Energy saving state of the GPON port. Options: 1. yes (1) - The GPON port is in energy saving state 2. no (2) - The GPON port is not in energy saving state |
| 1.3.6.1.4.1.2011.6.128.1.1.2.21.1.23 | ColumnhwGponDeviceOltControlManualCheckRogueOnt | read-write | current | This object indicates the switch of the rogue ONT manual check. Options: 1. startup(1) - Start up the switch of the rogue ONT manual checked 2. invalid(-1) - I… |
| 1.3.6.1.4.1.2011.6.128.1.1.2.22 | TablehwGponOltOpticsModuleInfoTable | not-accessible | current | This table is used to query the information about the optical transceiver. The index of this table is ifIndex. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.22.1 | RowhwGponOltOpticsModuleInfoEntry | not-accessible | current | This table is used to query the information about the optical transceiver. The index of this entry is ifIndex. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.22.1.1 | ColumnhwGponOltOpticsModuleInfoIdentifier | read-only | current | This object indicates the type of serial transceiver. Options: 1. unknown(1) - Unknown or unspecified 2. gbic(2) - GBIC 3. solderedToMotherboard(3) - Module so… |
| 1.3.6.1.4.1.2011.6.128.1.1.2.22.1.2 | ColumnhwGponOltOpticsModuleInfoExtID | read-only | current | This object indicates the extended identifier of type of serial transceiver. Options: 1. notSpecifiedOrNotCompliant(1) - Not specified or not compliant with a … |
| 1.3.6.1.4.1.2011.6.128.1.1.2.22.1.3 | ColumnhwGponOltOpticsModuleInfoConnector | read-only | current | This object indicates the code for connector type. Options: 1. unknown(1) - Unknown 2. sc(2) - SC 3. copperConnector1(3) - Fibre Channel Style 1 copper connect… |
| 1.3.6.1.4.1.2011.6.128.1.1.2.22.1.4 | ColumnhwGponOltOpticsModuleInfoEncoding | read-only | current | This object indicates the code for serial encoding algorithm. Options: 1. unspecified(1) - Unspecified 2. encodingMethod8B10B(2) - 8B10B 3. encodingMethod4B5B(… |
| 1.3.6.1.4.1.2011.6.128.1.1.2.22.1.5 | ColumnhwGponOltOpticsModuleInfoBrNominal | read-only | current | This object indicates the nominal bit rate, units of 100 MBits/sec. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.22.1.6 | ColumnhwGponOltOpticsModuleInfoLength9Micronkm | read-only | current | This object indicates the link length supported for 9/125 micron fiber, units of 1000 m. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.22.1.7 | ColumnhwGponOltOpticsModuleInfoLength9Micron | read-only | current | This object indicates the link length supported for 9/125 micron fiber, units of 100 m. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.22.1.8 | ColumnhwGponOltOpticsModuleInfoLength50Micron | read-only | current | This object indicates the link length supported for 50/125 micron fiber, units of 10 m. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.22.1.9 | ColumnhwGponOltOpticsModuleInfoLength62Micron5 | read-only | current | This object indicates the link length supported for 62.5/125 micron fiber, units of 10 m. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.22.1.10 | ColumnhwGponOltOpticsModuleInfoLengthCopper | read-only | current | This object indicates the link length supported for copper, units of meters. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.22.1.11 | ColumnhwGponOltOpticsModuleInfoVendorName | read-only | current | This object indicates the SFP vendor name (ASCII). |
| 1.3.6.1.4.1.2011.6.128.1.1.2.22.1.12 | ColumnhwGponOltOpticsModuleInfoVendorOUI | read-only | current | This object indicates the SFP vendor IEEE company ID. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.22.1.13 | ColumnhwGponOltOpticsModuleInfoVendorPN | read-only | current | This object indicates the part number provided by SFP vendor (ASCII). |
| 1.3.6.1.4.1.2011.6.128.1.1.2.22.1.14 | ColumnhwGponOltOpticsModuleInfoVendorRev | read-only | current | This object indicates the revision level for part number provided by vendor (ASCII). |
| 1.3.6.1.4.1.2011.6.128.1.1.2.22.1.15 | ColumnhwGponOltOpticsModuleInfoWaveLength | read-only | current | This object indicates the laser wavelength, units of nm. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.22.1.16 | ColumnhwGponOltOpticsModuleInfoCcBase | read-only | current | This object indicates the check code for Base ID Fields. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.22.1.17 | ColumnhwGponOltOpticsModuleInfoOptions | read-only | current | Indicates which optional transceiver signals are implemented. bit Description of option 10 Cooled laser transmitter 9 Power Level 2 requirement 8 Linear Receiv… |
| 1.3.6.1.4.1.2011.6.128.1.1.2.22.1.18 | ColumnhwGponOltOpticsModuleInfoBrMax | read-only | current | This object indicates the upper bit rate margin, units of %. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.22.1.19 | ColumnhwGponOltOpticsModuleInfoBrMin | read-only | current | This object indicates the lower bit rate margin, units of %. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.22.1.20 | ColumnhwGponOltOpticsModuleInfoVendorSN | read-only | current | This object indicates the serial number provided by vendor (ASCII). |
| 1.3.6.1.4.1.2011.6.128.1.1.2.22.1.21 | ColumnhwGponOltOpticsModuleInfoDateCode | read-only | current | This object indicates manufacturing date code of the vendor (ASCII). |
| 1.3.6.1.4.1.2011.6.128.1.1.2.22.1.22 | ColumnhwGponOltOpticsModuleInfoDiagnosticMonitoringType | read-only | current | Indicates which type of diagnostic monitoring is implemented. bit Description of Diagnostic Monitoring Type 7 Reserved 6 Digital diagnostic monitoring 5 Intern… |
| 1.3.6.1.4.1.2011.6.128.1.1.2.22.1.23 | ColumnhwGponOltOpticsModuleInfoEnhancedOptions | read-only | current | Indicates which optional enhanced features are implemented. bit Description of Enhanced Options 7 Alarm/warning flags 6 TX_DISABLE control and monitoring 5 TX_… |
| 1.3.6.1.4.1.2011.6.128.1.1.2.22.1.24 | ColumnhwGponOltOpticsModuleInfoSFF8472Compliance | read-only | current | Indicates which revision of SFF-8472 the transceiver complies Options: 1. undefined(1) - Not included or undefined 2. includesRev93SFF8472(2) - Includes functi… |
| 1.3.6.1.4.1.2011.6.128.1.1.2.22.1.25 | ColumnhwGponOltOpticsModuleInfoCcExt | read-only | current | This object indicates the check code for the Extended ID Fields. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.22.1.26 | ColumnhwGponOltOpticsModuleInfoVendorSpecific | read-only | current | This object indicates the vendor Specific EEPROM. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.22.1.27 | ColumnhwGponOltOpticsModuleXponType | read-only | current | This object indicates the type of the optical transceiver. Options: 1. unknown(1) - Unknown 2. gpon(2) - GPON 3. epon(3) - EPON 4. epon10g(4) - 10G EPON 5. gpo… |
| 1.3.6.1.4.1.2011.6.128.1.1.2.22.1.28 | ColumnhwGponOltOpticsModuleXponSubType | read-only | current | This object indicates the sub type of the optical transceiver. Options: 1. unknown(1) - Unknown 2. classbplus(101) - CLASS B+ 3. classcplus(102) - CLASS C+ 4. … |
| 1.3.6.1.4.1.2011.6.128.1.1.2.22.1.29 | ColumnhwGponOltOpticsModuleXponUsedType | read-only | current | This object indicates the application scenario of the optical transceiver. Options: 1. unknown(1) - Unknown 2. olt(2) - OLT 3. ont(3) - ONT 4. onu(4) - ONU 5. … |
| 1.3.6.1.4.1.2011.6.128.1.1.2.22.1.30 | ColumnhwGponOltOpticsModuleXponEncapsulationType | read-only | current | This object indicates the encapsulation information about the optical transceiver. Options: 1. unknown(1) - Unknown 2. sff2x5(2) - SFF 2x5 3. sff2x10(3) - SFF … |
| 1.3.6.1.4.1.2011.6.128.1.1.2.23 | TablehwGponOltOpticsDdmInfoTable | not-accessible | current | This table is used to query the diagnostic information about the optical transceiver of the GPON port. The index of this table is ifIndex. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.23.1 | RowhwGponOltOpticsDdmInfoEntry | not-accessible | current | This table is used to query the diagnostic information about the optical transceiver of the GPON port. The index of this entry is ifIndex. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.23.1.1 | ColumnhwGponOltOpticsDdmInfoTemperature | read-only | current | This object indicates the optics temperature, units of C(centigrade). |
| 1.3.6.1.4.1.2011.6.128.1.1.2.23.1.2 | ColumnhwGponOltOpticsDdmInfoSupplyVoltage | read-only | current | This object indicates the supply voltage, units of 0.01V. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.23.1.3 | ColumnhwGponOltOpticsDdmInfoTxBiasCurrent | read-only | current | This object indicates the optics current, units of mA. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.23.1.4 | ColumnhwGponOltOpticsDdmInfoTxPower | read-only | current | This object indicates the optics send power, units of 0.01dBm. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.23.1.5 | ColumnhwGponOltOpticsDdmInfoRxPower | read-only | current | This object indicates the optics received power, units of 0.01dBm. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.24 | TablehwEponOltXFPOpticsModuleInfoTable | not-accessible | current | This table is used to query the optics module informationof the 10G EPON port. The index of this table is ifIndex. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.24.1 | RowhwEponOltXFPOpticsModuleInfoEntry | not-accessible | current | This table is used to query the optics module informationof the 10G EPON port. The index of this entry is ifIndex. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.24.1.1 | ColumnhwEponOltXFPOpticsModuleInfoIdentifier | read-only | current | This object indicates the type of serial transceiver. Options: 1. unknown(0) - Unknown or unspecified 2. gbic(1) - GBIC 3. solderedToMotherboard(2) - Module so… |
| 1.3.6.1.4.1.2011.6.128.1.1.2.24.1.2 | ColumnhwEponOltXFPOpticsModuleInfoExtCLEICode | read-only | current | This object indicates the extclei code. Options: 1. nonExtCLEICode(0) - No CLEI code present in Table 02h 2. extCLEICode(1) - CLEI code present in Table 02h 3.… |
| 1.3.6.1.4.1.2011.6.128.1.1.2.24.1.3 | ColumnhwEponOltXFPOpticsModuleInfoExtTXRefClock | read-only | current | This object indicates the txref clock. Options: 1. nonExtTXRefClock(0) - TX Ref Clock Input Not Required 2. extTXRefClock(1) - TX Ref Clock Input Required 3. i… |
| 1.3.6.1.4.1.2011.6.128.1.1.2.24.1.4 | ColumnhwEponOltXFPOpticsModuleInfoExtCDRFunc | read-only | current | This object indicates the CDR function. Options: 1. nonExtCDRFunc(0) - Non-CDR version of XFP 2. extCDRFunc(1) - Module with CDR function 3. invalid(-1) - Indi… |
| 1.3.6.1.4.1.2011.6.128.1.1.2.24.1.5 | ColumnhwEponOltXFPOpticsModuleInfoExtPowerLevel | read-only | current | This object indicates the power level. Options: 1. extPowerLevel1(0) - Power Level 1 Module (1.5 W max. power dissipation.) 2. extPowerLevel2(1) - Power Level … |
| 1.3.6.1.4.1.2011.6.128.1.1.2.24.1.6 | ColumnhwEponOltXFPOpticsModuleInfoConnector | read-only | current | This object indicates the code for connector type. Options: 1. unknown(1) - Unknown 2. sc(2) - SC 3. copperConnector1(3) - Fibre Channel Style 1 copper connect… |
| 1.3.6.1.4.1.2011.6.128.1.1.2.24.1.7 | ColumnhwEponOltXFPOpticsModuleInfoEncodingRZ | read-only | current | This object indicates the EncodingRZ. Options: 1. nonEncodingRZ(0) - Encoding Don't Support RZ 2. encodingRZ(1) - Encoding Support RZ 3. invalid(-1) - Indicate… |
| 1.3.6.1.4.1.2011.6.128.1.1.2.24.1.8 | ColumnhwEponOltXFPOpticsModuleInfoEncodingNRZ | read-only | current | This object indicates the EncodingNRZ. Options: 1. nonEncodingNRZ(0) - Encoding Don't Support NRZ 2. encodingNRZ(1) - Encoding Support NRZ 3. invalid(-1) - Ind… |
| 1.3.6.1.4.1.2011.6.128.1.1.2.24.1.9 | ColumnhwEponOltXFPOpticsModuleInfoEncoding8B10B | read-only | current | This object indicates the Encoding8B10B. Options: 1. nonEncoding8B10B(0) - Encoding Don't Support 8B10B 2. encoding8B10B(1) - Encoding Support 8B10B 3. invalid… |
| 1.3.6.1.4.1.2011.6.128.1.1.2.24.1.10 | ColumnhwEponOltXFPOpticsModuleInfoEncoding64B | read-only | current | This object indicates the Encoding64B. Options: 1. nonEncoding64B(0) - Encoding Don't Support 64B/66B 2. encoding64B(1) - Encoding Support 64B/66B 3. invalid(-… |
| 1.3.6.1.4.1.2011.6.128.1.1.2.24.1.11 | ColumnhwEponOltXFPOpticsModuleInfoBrMin | read-only | current | Minimum bit rate, units of 100 MBits/s. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.24.1.12 | ColumnhwEponOltXFPOpticsModuleInfoBrMax | read-only | current | Maximum bit rate, units of 100 MBits/s. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.24.1.13 | ColumnhwEponOltXFPOpticsModuleInfoSupportLenSMF | read-only | current | Link length supported for SMF fiber in km. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.24.1.14 | ColumnhwEponOltXFPOpticsModuleInfoSupportLenE50um | read-only | current | Link length supported for EBW 50/125 um fiber, units of 2 m. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.24.1.15 | ColumnhwEponOltXFPOpticsModuleInfoSupportLen50um | read-only | current | Link length supported for 50/125 um fiber, units of 1 m. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.24.1.16 | ColumnhwEponOltXFPOpticsModuleInfoSupportLen62p5um | read-only | current | Link length supported for 62.5/125 um fiber, units of 1 m. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.24.1.17 | ColumnhwEponOltXFPOpticsModuleInfoSupportLenCopper | read-only | current | Link length supported for copper, units of 1m. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.24.1.18 | ColumnhwEponOltXFPOpticsModuleInfoTransmitterSupport | read-only | current | This object indicates the transmitter support. Options: 1. nonTunable(0) - Transmitter Not Support Tunable 2. tunable(1) - Transmitter Support Tunable 3. inval… |
| 1.3.6.1.4.1.2011.6.128.1.1.2.24.1.19 | ColumnhwEponOltXFPOpticsModuleInfoDetector | read-only | current | This object indicates the transmitter support. Options: 1. pin(0) - PIN 2. apd(1) - APD 3. invalid(-1) - Indicates that the query fails or no information is de… |
| 1.3.6.1.4.1.2011.6.128.1.1.2.24.1.20 | ColumnhwEponOltXFPOpticsModuleInfoWavelengthControl | read-only | current | This object indicates the wavelength control. Options: 1. nonSupport(0) - Wavelength control NonSupport 2. support(1) - Wavelength control Support 3. invalid(-… |
| 1.3.6.1.4.1.2011.6.128.1.1.2.24.1.21 | ColumnhwEponOltXFPOpticsModuleInfoCooledTransmitterDevice | read-only | current | This object indicates the cooled transmitter device. Options: 1. nonSupport(0) - Cooled transmitter device NonSupport 2. support(1) - Cooled transmitter device… |
| 1.3.6.1.4.1.2011.6.128.1.1.2.24.1.22 | ColumnhwEponOltXFPOpticsModuleInfoTransmitterTechnologySupport | read-only | current | This object indicates the transmitter technology support. Options: 1. vCSEL850(0) - vCSEL850 2. vCSEL1310(1) - vCSEL1310 3. vCSEL1550(2) - vCSEL1550 4. fP1310(… |
| 1.3.6.1.4.1.2011.6.128.1.1.2.24.1.23 | ColumnhwEponOltXFPOpticsModuleInfoVendorName | read-only | current | This object indicates the XFP vendor name (ASCII). |
| 1.3.6.1.4.1.2011.6.128.1.1.2.24.1.24 | ColumnhwEponOltXFPOpticsModuleInfoSupportXFIMode | read-only | current | This object indicates the XFI mode. Options: 1. nonSupportXFIMode(0) - Don't Support XFI Loopback Mode 2. supportXFIMode(1) - XFI Loopback Mode Supported 3. in… |
| 1.3.6.1.4.1.2011.6.128.1.1.2.24.1.25 | ColumnhwEponOltXFPOpticsModuleInfoSupportLinesideMode | read-only | current | This object indicates the XFI mode. Options: 1. nonSupportLinesideMode(0) - Don't Support Lineside Loopback Mode 2. supportLinesideMode(1) - Lineside Loopback … |
| 1.3.6.1.4.1.2011.6.128.1.1.2.24.1.26 | ColumnhwEponOltXFPOpticsModuleInfoMaxBitRateSupportedByCDR | read-only | current | This object indicates the max bit rate by CDR. Options: 1. cDRNosupport(0) - CDR not support 2. maxBitRateSupportedByCDR11p1(1) - CDR support for 11.1 Gb/s 3. … |
| 1.3.6.1.4.1.2011.6.128.1.1.2.24.1.27 | ColumnhwEponOltXFPOpticsModuleInfoVendorOUI | read-only | current | This object indicates the Vendor OUI. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.24.1.28 | ColumnhwEponOltXFPOpticsModuleInfoVendorPN | read-only | current | This object indicates the Vendor PN. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.24.1.29 | ColumnhwEponOltXFPOpticsModuleInfoVendorRev | read-only | current | This object indicates the Vendor rev. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.24.1.30 | ColumnhwEponOltXFPOpticsModuleInfoF51 | read-only | current | This object indicates the Wavelength. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.24.1.31 | ColumnhwEponOltXFPOpticsModuleInfoWaveTolerance | read-only | current | This object indicates the WaveTolerance. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.24.1.32 | ColumnhwEponOltXFPOpticsModuleInfoMaxCaseTemperature | read-only | current | This object indicates the Maximum Case Temperature in Degrees C. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.24.1.33 | ColumnhwEponOltXFPOpticsModuleInfoCcbase | read-only | current | This object indicates the Cc_base. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.24.1.34 | ColumnhwEponOltXFPOpticsModuleInfoMaxDissipation | read-only | current | This object indicates the Maximum Power Dissipation. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.24.1.35 | ColumnhwEponOltXFPOpticsModuleInfoMaxDissipationPowerDownMode | read-only | current | This object indicates the Maximum Total Power Dissipation in Power Down Mode. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.24.1.36 | ColumnhwEponOltXFPOpticsModuleInfoMaximum5P0VSupply | read-only | current | This object indicates the Maximum current required by +5V Supply. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.24.1.37 | ColumnhwEponOltXFPOpticsModuleInfoMaximum3P3VSupply | read-only | current | This object indicates the Maximum current required by +3.3V Supply. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.24.1.38 | ColumnhwEponOltXFPOpticsModuleInfoMaximum1P8VSupply | read-only | current | This object indicates the Maximum current required by +1.8V Supply. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.24.1.39 | ColumnhwEponOltXFPOpticsModuleInfoMaximum5P2VSupply | read-only | current | This object indicates the Maximum current required by -5.2V Supply. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.24.1.40 | ColumnhwEponOltXFPOpticsModuleInfoVendorSN | read-only | current | This object indicates the Vendor SN. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.24.1.41 | ColumnhwEponOltXFPOpticsModuleInfoDateCode | read-only | current | This object indicates the Date code. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.24.1.42 | ColumnhwEponOltXFPOpticsModuleInfoDiagnoMonitorPowerMeasure | read-only | current | This object indicates the Received power measurement type. Options: 1. supportOMA(0) - OMA 2. supportAveragePower(1) - Average Power 3. invalid(-1) - Indicates… |
| 1.3.6.1.4.1.2011.6.128.1.1.2.24.1.43 | ColumnhwEponOltXFPOpticsModuleInfoDiagnoMonitorTypeFECBER | read-only | current | This object indicates the Module Respond to FEC BER. Options: 1. nonSupportBER(0) - No BER Support 2. supportBER(1) - BER Support 3. invalid(-1) - Indicates th… |
| 1.3.6.1.4.1.2011.6.128.1.1.2.24.1.44 | ColumnhwEponOltXFPOpticsModuleInfoEnhancedOptions | read-only | current | Indicates which optional enhanced features are implemented. bit Description of Enhanced Options 7 Module Supports Optional VPS 6 Optional Soft TX_DISABLE imple… |
| 1.3.6.1.4.1.2011.6.128.1.1.2.24.1.45 | ColumnhwEponOltXFPOpticsModuleInfoAuxInputOne | read-only | current | This object indicates the optics Aux Input One. Options: 1. auxInputType1(0) - Auxiliary monitoring not implemented 2. auxInputType2(1) - APD Bias Voltage 3. a… |
| 1.3.6.1.4.1.2011.6.128.1.1.2.24.1.46 | ColumnhwEponOltXFPOpticsModuleInfoAuxInputTwo | read-only | current | This object indicates the optics Aux Input two. Options: 1. auxInputType1(0) - Auxiliary monitoring not implemented 2. auxInputType2(1) - APD Bias Voltage 3. a… |
| 1.3.6.1.4.1.2011.6.128.1.1.2.24.1.47 | ColumnhwEponOltXFPOpticsModuleInfoCCEXT | read-only | current | This object indicates the CC_EXT . |
| 1.3.6.1.4.1.2011.6.128.1.1.2.24.1.48 | ColumnhwEponOltXFPOpticsModuleInfoWavelengthFor2d5G | read-only | current | This object indicates the Wavelength for 2.5G. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.24.1.49 | ColumnhwEponOltXFPOpticsModuleInfoWavelengthFor1d25G | read-only | current | This object indicates the Wavelength for 1.25G. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.24.1.50 | ColumnhwEponOltXFPOpticsModuleInfoVendorSpecific | read-only | current | This object indicates the Vendor specific. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.24.1.51 | ColumnhwEponOltXFPOpticsModuleXponType | read-only | current | This object indicates the module type. Options: 1. unknown(1) - Unknown 2. gpon(2) - GPON 3. epon(3) - EPON 4. epon10g(4) - 10G EPON 5. gpon10g(5) - 10G GPON 6… |
| 1.3.6.1.4.1.2011.6.128.1.1.2.24.1.52 | ColumnhwEponOltXFPOpticsModuleXponSubType | read-only | current | This object indicates the sub module type. Options: 1. unknown(1) - Unknown 2. classbplus(101) - CLASS B+ 3. classcplus(102) - CLASS C+ 4. classb(103) - CLASS … |
| 1.3.6.1.4.1.2011.6.128.1.1.2.24.1.53 | ColumnhwEponOltXFPOpticsModuleXponUsedType | read-only | current | This object indicates the application scenario of the optical transceiver. Options: 1. unknown(1) - Unknown 2. olt(2) - OLT 3. ont(3) - ONT 4. onu(4) - ONU 5. … |
| 1.3.6.1.4.1.2011.6.128.1.1.2.24.1.54 | ColumnhwEponOltXFPOpticsModuleXponEncapsulationType | read-only | current | This object indicates the encapsulation information about the optical transceiver. Options: 1. unknown(1) - Unknown 2. sff2x5(2) - SFF 2x5 3. sff2x10(3) - SFF … |
| 1.3.6.1.4.1.2011.6.128.1.1.2.24.1.55 | ColumnhwEponOltXFPOpticsModuleXponTemperatureLevel | read-only | current | This object indicates the application scenario of the optical transceiver. Options: 1. unknown(1) - Unknown 2. commercial(2) - commercial 3. industry(3) - indu… |
| 1.3.6.1.4.1.2011.6.128.1.1.2.24.1.56 | ColumnhwEponOltXFPOpticsModuleXponOPMprecision | read-only | current | This object indicates the OPM precision. Options: 1. unknown(1) - Unknown 2. db3(2) - 3db 3. db1(3) - 1db 4. invalid(-1) - Indicates that the query fails or no… |
| 1.3.6.1.4.1.2011.6.128.1.1.2.31 | TablehwEponDeviceOltControlInfoTable | not-accessible | current | This table implements the control of the EPON port. The index of this table is ifIndex. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.31.1 | RowhwEponDeviceOltControlInfoEntry | not-accessible | current | This table implements the control of the EPON port. The index of this entry is ifIndex. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.31.1.1 | ColumnhwEponDeviceOltControlfarthest | read-write | current | This object indicates the fiber distance between the OLT and the farthest ONT EPON: 0-40 km 10 Gb/s EPON: 0-60 km |
| 1.3.6.1.4.1.2011.6.128.1.1.2.31.1.2 | ColumnhwEponDeviceOltControlAutofindOntEnable | read-write | current | This object indicates the ONT auto find switch. Options: 1. enable(1) - Enable the ONT auto find switch 2. disable(2) - Disable the ONT auto find switch 3. inv… |
| 1.3.6.1.4.1.2011.6.128.1.1.2.31.1.3 | ColumnhwEponDeviceOltControlDespt | read-write | current | This object indicates the description of the EPON port. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.31.1.4 | ColumnhwEponDeviceOltControlLaserSwitch | read-write | current | This object indicates the laser switch of the EPON port. Options: 1. on(1) - Open the laser switch of the EPON port 2. off(2) - Close the laser switch of the E… |
| 1.3.6.1.4.1.2011.6.128.1.1.2.31.1.5 | ColumnhwEponDeviceOltControlStatus | read-only | current | This object indicates the EPON port status in the OLT: Options: 1. up(1) - Indicates that the EPON port is normal 2. down(2) - Indicates that the EPON port is … |
| 1.3.6.1.4.1.2011.6.128.1.1.2.31.1.6 | ColumnhwEponDeviceOltControlUpStreamBandWidth | read-only | current | This object indicates the up-stream bandwidth of EPON port. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.31.1.7 | ColumnhwEponDeviceOltControlDownStreamBandWidth | read-only | current | This object indicates the down-stream bandwidth of EPON port. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.31.1.8 | ColumnhwEponDeviceOltControlOpticAlarmProfileName | read-write | current | This object indicates the short delay switch status that is saved in the database of the OLT. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.31.1.9 | ColumnhwEponDeviceOltLowTimeLapseSwitch | read-write | current | This object is used to query the short delay switch status that is saved in the database of the OLT. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.31.1.10 | ColumnhwEponDeviceOltEffectiveFlag | read-write | current | This object is the flag indicating whether the buffer function takes effect immediately. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.31.1.11 | ColumnhwEponOltLowTimeLapseStatus | read-only | current | This object indicates the status of the EPON low time switch. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.31.1.12 | ColumnhwEponDeviceOltControlOntNum | read-only | current | This object indictates the number of ONTs that are added to the port. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.31.1.13 | ColumnhwEponDeviceOltControlVlanTagMode | read-write | current | This object indicates the configuration function of the VLAN tag mode of the PON port. Options: 1. tagbasedont(1) - Tag-based-ont 2. tagbasedvlan(2) - Tag-base… |
| 1.3.6.1.4.1.2011.6.128.1.1.2.31.1.14 | ColumnhwEponDeviceOltLastUpTime | read-only | current | This object indicates the time when the port last goes online. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.31.1.15 | ColumnhwEponDeviceOltLastDownTime | read-only | current | This object indicates the time when the port last goes offline. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.31.1.16 | ColumnhwEponDeviceOltLastDownCause | read-only | current | This object indicates the reason why the port last goes offline. Options: 1. los(1) - Loss of signal 2. opticModuleAbsence(2) - The optic module is absence 3. … |
| 1.3.6.1.4.1.2011.6.128.1.1.2.31.1.17 | ColumnhwEponDeviceOltControlLeftBandWidth | read-only | current | This object indicates the untapped bandwidth of 1G upstream ONT's port, unit Kbps. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.31.1.18 | ColumnhwEponDeviceOltControlAvailableBandWidth | read-only | current | This object indicates the available bandwidth of 1G upstream ONT's port, unit Kbps. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.31.1.19 | ColumnhwEponDeviceOltControlManualDetectRogueOnt | read-write | current | This object indicates the switch of the rogue ONT manual detection. Options: 1. startup(1) - Starts up the switch of the rogue ONT manual detection 2. invalid(… |
| 1.3.6.1.4.1.2011.6.128.1.1.2.31.1.20 | ColumnhwEponDeviceOltRogueOntExist | read-only | current | This object is used to query whether there are Illegal incursionary rogue ONTs under port. Options: 1. inexistent(0) - Indicates that there are not Illegal inc… |
| 1.3.6.1.4.1.2011.6.128.1.1.2.31.1.21 | ColumnhwEponDeviceOltLeftBandWidth10GUpstream | read-only | current | This object indicates the untapped bandwidth of 10G upstream ONT's port, unit Kbps. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.31.1.22 | ColumnhwEponDeviceOltAvailableBandWidth10GUpstream | read-only | current | This object indicates the available bandwidth of 10G upstream ONT's port, unit Kbps. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.31.1.23 | ColumnhwEponDeviceOltControlAlarmProfileName | read-write | current | This object indicates the name of the alarm profile that is bound to the EPON port. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.31.1.24 | ColumnhwEponDeviceOltControlWarningProfileName | read-write | current | This object indicates the name of the warning profile that is bound to the EPON port. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.31.1.25 | ColumnhwEponDeviceOltControlEnergySavingFlag | read-only | current | Energy saving state of the EPON port. Options: 1. yes (1) - The EPON port is in energy saving state 2. no (2) - The EPON port is not in energy saving state |
| 1.3.6.1.4.1.2011.6.128.1.1.2.31.1.26 | ColumnhwEponDeviceOltControlManualCheckRogueOnt | read-write | current | This object indicates the switch of the rogue ONT manual check. Options: 1. startup(1) - Start up the switch of the rogue ONT manual checked 2. invalid(-1) - I… |
| 1.3.6.1.4.1.2011.6.128.1.1.2.32 | TablehwEponOltOpticsModuleInfoTable | not-accessible | current | Show the optics module information. The index of this table is ifIndex. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.32.1 | RowhwEponOltOpticsModuleInfoEntry | not-accessible | current | Show the optics module information. The index of this entry is ifIndex. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.32.1.1 | ColumnhwEponOltOpticsModuleInfoIdentifier | read-only | current | This object indicates the type of serial transceiver. Options: 1. unknown(1) - Unknown or unspecified 2. gbic(2) - GBIC 3. solderedToMotherboard(3) - Module so… |
| 1.3.6.1.4.1.2011.6.128.1.1.2.32.1.2 | ColumnhwEponOltOpticsModuleInfoExtID | read-only | current | This object indicates the extended identifier of type of serial transceiver. Options: 1. notSpecifiedOrNotCompliant(1) - Not specified or not compliant with a … |
| 1.3.6.1.4.1.2011.6.128.1.1.2.32.1.3 | ColumnhwEponOltOpticsModuleInfoConnector | read-only | current | This object indicates the code for connector type. Options: 1. unknown(1) - Unknown 2. sc(2) - SC 3. copperConnector1(3) - Fibre Channel Style 1 copper connect… |
| 1.3.6.1.4.1.2011.6.128.1.1.2.32.1.4 | ColumnhwEponOltOpticsModuleInfoEncoding | read-only | current | This object indicates the code for serial encoding algorithm. Options: 1. unspecified(1) - Unspecified 2. encodingMethod8B10B(2) - 8B10B 3. encodingMethod4B5B(… |
| 1.3.6.1.4.1.2011.6.128.1.1.2.32.1.5 | ColumnhwEponOltOpticsModuleInfoBrNominal | read-only | current | This object indicates the nominal bit rate, units of 100 MBits/sec. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.32.1.6 | ColumnhwEponOltOpticsModuleInfoLength9Micronkm | read-only | current | This object indicates the link length supported for 9/125 micron fiber, units of 1000 m. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.32.1.7 | ColumnhwEponOltOpticsModuleInfoLength9Micron | read-only | current | This object indicates the link length supported for 9/125 micron fiber, units of 100 m. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.32.1.8 | ColumnhwEponOltOpticsModuleInfoLength50Micron | read-only | current | This object indicates the link length supported for 50/125 micron fiber, units of 10 m. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.32.1.9 | ColumnhwEponOltOpticsModuleInfoLength62Micron5 | read-only | current | This object indicates the link length supported for 62.5/125 micron fiber, units of 10 m. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.32.1.10 | ColumnhwEponOltOpticsModuleInfoLengthCopper | read-only | current | This object indicates the link length supported for copper, units of meters. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.32.1.11 | ColumnhwEponOltOpticsModuleInfoVendorName | read-only | current | This object indicates the SFP vendor name (ASCII). |
| 1.3.6.1.4.1.2011.6.128.1.1.2.32.1.12 | ColumnhwEponOltOpticsModuleInfoVendorOUI | read-only | current | This object indicates the SFP vendor IEEE company ID. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.32.1.13 | ColumnhwEponOltOpticsModuleInfoVendorPN | read-only | current | This object indicates the part number provided by SFP vendor (ASCII). |
| 1.3.6.1.4.1.2011.6.128.1.1.2.32.1.14 | ColumnhwEponOltOpticsModuleInfoVendorRev | read-only | current | This object indicates the revision level for part number provided by vendor (ASCII). |
| 1.3.6.1.4.1.2011.6.128.1.1.2.32.1.15 | ColumnhwEponOltOpticsModuleInfoWaveLength | read-only | current | This object indicates the laser wavelength, units of nm. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.32.1.16 | ColumnhwEponOltOpticsModuleInfoCcBase | read-only | current | This object indicates the check code for Base ID Fields. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.32.1.17 | ColumnhwEponOltOpticsModuleInfoOptions | read-only | current | Indicates which optional transceiver signals are implemented. bit Description of option 10 Cooled laser transmitter 9 Power Level 2 requirement 8 Linear Receiv… |
| 1.3.6.1.4.1.2011.6.128.1.1.2.32.1.18 | ColumnhwEponOltOpticsModuleInfoBrMax | read-only | current | This object indicates the upper bit rate margin, units of %. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.32.1.19 | ColumnhwEponOltOpticsModuleInfoBrMin | read-only | current | This object indicates the lower bit rate margin, units of %. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.32.1.20 | ColumnhwEponOltOpticsModuleInfoVendorSN | read-only | current | This object indicates the serial number provided by vendor (ASCII). |
| 1.3.6.1.4.1.2011.6.128.1.1.2.32.1.21 | ColumnhwEponOltOpticsModuleInfoDateCode | read-only | current | This object indicates manufacturing date code of the vendor (ASCII). |
| 1.3.6.1.4.1.2011.6.128.1.1.2.32.1.22 | ColumnhwEponOltOpticsModuleInfoDiagnosticMonitoringType | read-only | current | Indicates which type of diagnostic monitoring is implemented. bit Description of Diagnostic Monitoring Type 7 Reserved 6 Digital diagnostic monitoring 5 Intern… |
| 1.3.6.1.4.1.2011.6.128.1.1.2.32.1.23 | ColumnhwEponOltOpticsModuleInfoEnhancedOptions | read-only | current | Indicates which optional enhanced features are implemented. bit Description of Enhanced Options 7 Alarm/warning flags 6 TX_DISABLE control and monitoring 5 TX_… |
| 1.3.6.1.4.1.2011.6.128.1.1.2.32.1.24 | ColumnhwEponOltOpticsModuleInfoSFF8472Compliance | read-only | current | Indicates which revision of SFF-8472 the transceiver complies Options: 1. undefined(1) - Not included or undefined 2. includesRev93SFF8472(2) - Includes functi… |
| 1.3.6.1.4.1.2011.6.128.1.1.2.32.1.25 | ColumnhwEponOltOpticsModuleInfoCcExt | read-only | current | This object indicates the check code for the Extended ID Fields. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.32.1.26 | ColumnhwEponOltOpticsModuleInfoVendorSpecific | read-only | current | This object indicates the vendor Specific EEPROM. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.32.1.27 | ColumnhwEponOltOpticsModuleXponType | read-only | current | This object indicates the type of the optical transceiver. Options: 1. unknown(1) - Unknown 2. gpon(2) - GPON 3. epon(3) - EPON 4. epon10g(4) - 10G EPON 5. gpo… |
| 1.3.6.1.4.1.2011.6.128.1.1.2.32.1.28 | ColumnhwEponOltOpticsModuleXponSubType | read-only | current | This object indicates the sub type of the optical transceiver. Options: 1. unknown(1) - Unknown 2. classbplus(101) - CLASS B+ 3. classcplus(102) - CLASS C+ 4. … |
| 1.3.6.1.4.1.2011.6.128.1.1.2.32.1.29 | ColumnhwEponOltOpticsModuleXponUsedType | read-only | current | This object indicates the application scenario of the optical transceiver. Options: 1. unknown(1) - Unknown 2. olt(2) - OLT 3. ont(3) - ONT 4. onu(4) - ONU 5.i… |
| 1.3.6.1.4.1.2011.6.128.1.1.2.32.1.30 | ColumnhwEponOltOpticsModuleXponEncapsulationType | read-only | current | This object indicates the encapsulation information about the optical transceiver. Options: 1. unknown(1) - Unknown 2. sff2x5(2) - SFF 2x5 3. sff2x10(3) - SFF … |
| 1.3.6.1.4.1.2011.6.128.1.1.2.33 | TablehwEponOltOpticsDdmInfoTable | not-accessible | current | This table is used to query the diagnostic information about the optical transceiver of the EPON port. The index of this table is ifIndex. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.33.1 | RowhwEponOltOpticsDdmInfoEntry | not-accessible | current | This table is used to query the diagnostic information about the optical transceiver of the EPON port. The index of this entry is ifIndex. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.33.1.1 | ColumnhwEponOltOpticsDdmInfoTemperature | read-only | current | This object indicates the optics temperature, units of C(centigrade). |
| 1.3.6.1.4.1.2011.6.128.1.1.2.33.1.2 | ColumnhwEponOltOpticsDdmInfoSupplyVoltage | read-only | current | This object indicates the supply voltage, units of 0.01V. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.33.1.3 | ColumnhwEponOltOpticsDdmInfoTxBiasCurrent | read-only | current | This object indicates the optics current, units of mA. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.33.1.4 | ColumnhwEponOltOpticsDdmInfoTxPower | read-only | current | This object indicates the optics send power, units of 0.01dBm. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.33.1.5 | ColumnhwEponOltOpticsDdmInfoRxPower | read-only | current | This object indicates the optics receive power, units of 0.01dBm. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.41 | TablehwXponOntLoadSelectTable | not-accessible | current | It is used to add ont to loading list and query the loading state for ONT. The index of this table is a combination of ifIndex and hwXponDeviceOntIndex. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.41.1 | RowhwXponOntLoadSelectEntry | not-accessible | current | It is used to add ont to loading list and query the loading state for ONT. The index of this entry is a combination of ifIndex and hwXponDeviceOntIndex. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.41.1.1 | ColumnhwXponDeviceOntIndex | not-accessible | current | This object indicates the ONT ID, range: 0~255. The value of 255 indicates that ONT ID is invalid or ignored in process of ont loading. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.41.1.2 | ColumnhwXponOntLoadSelectState | read-only | current | This object indicates the loading state of the ONT. Options: 1. ready(1) - Indicates that the loading state of the ONT is ready 2. loading(2) - Indicates that … |
| 1.3.6.1.4.1.2011.6.128.1.1.2.41.1.3 | ColumnhwXponOntLoadSelectProgress | read-only | current | This object indicates the loading progress of the ONT |
| 1.3.6.1.4.1.2011.6.128.1.1.2.41.1.4 | ColumnhwXponOntLoadSelectRowStatus | read-create | current | This object is used to create a new row or to modify or delete an existing row in this table. Options: 1. createAndGo(4) -create a new instance of a conceptual… |
| 1.3.6.1.4.1.2011.6.128.1.1.2.41.1.5 | ColumnhwXponOntLoadSelectPriority | read-write | current | This object is used to set the priority of an ONT loading task. A smaller value represents a higher priority. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.41.1.6 | ColumnhwXponOntLoadSelectActiveMode | read-write | current | This object is used to configure the effect mode of an loaded ONT. Options: 1. nextstartup(1) - Indicates that the ONT takes effect after next startup 2. immed… |
| 1.3.6.1.4.1.2011.6.128.1.1.2.42 | NodehwXponOntLoadCtrlTable | |||
| 1.3.6.1.4.1.2011.6.128.1.1.2.42.1 | ScalarhwXponOntLoadFileType | read-write | current | This object indicates the ONT file type. Options: 1. app(1) - Application load 2. cfg(2) - Configuration load 3. inValidFileType(255) - Indicates that the quer… |
| 1.3.6.1.4.1.2011.6.128.1.1.2.42.2 | ScalarhwXponOntLoadServerIpAddr | read-write | current | This object indicates the server IP address. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.42.3 | ScalarhwXponOntLoadProtocol | read-write | current | This object indicates the transfer protocol. Options: 1. tftp(1) - TFTP 2. ftp(2) - FTP 3. sftp(3) - SFTP 4. inValidProtocol(255) - Indicates that the query fa… |
| 1.3.6.1.4.1.2011.6.128.1.1.2.42.4 | ScalarhwXponOntLoadFileName | read-write | current | This object indicates the file name. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.42.5 | ScalarhwXponOntLoadUserName | read-write | current | This object indicates the user name. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.42.6 | ScalarhwXponOntLoadPassword | read-write | current | This object indicates the password. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.42.7 | ScalarhwXponOntLoadAdminStatus | read-write | current | This object indicates the ONT loading flag. Options: 1. start(1) - Indicates that the loading of ONT is started 2. stop(2) - Indicates that the loading of ONT … |
| 1.3.6.1.4.1.2011.6.128.1.1.2.42.8 | ScalarhwXponOntLoadXmlIndex | read-write | current | F/S/P of ONT loading xml file. If the value of the ACCESS clause is 'write-only', then the value of the MAX-ACCESS clause MUST be 'read-write', and the DESCRIP… |
| 1.3.6.1.4.1.2011.6.128.1.1.2.42.9 | ScalarhwXponOntLoadXmlOntObjectIndex | read-write | current | ONT ID of loading xml file. If the value of the ACCESS clause is 'write-only', then the value of the MAX-ACCESS clause MUST be 'read-write', and the DESCRIPTIO… |
| 1.3.6.1.4.1.2011.6.128.1.1.2.42.10 | ScalarhwXponOntLoadImageActiveMode | read-write | current | Active mode of ont loading. Options: 1. nextstartup(1) - Indicates that the ONT takes effect after next startup 2. immediate(2) - Indicates that the ONT takes … |
| 1.3.6.1.4.1.2011.6.128.1.1.2.42.11 | ScalarhwXponOntLoadXmlAES128Key | read-write | current | This object indicates the AES-128 cryptographic key for the ont xml file. This AES-128 key is 128bits(16 Bytes). |
| 1.3.6.1.4.1.2011.6.128.1.1.2.42.12 | ScalarhwXponOntLoadServerPort | read-write | current | This object indicates the port of server for ont loading. The TFTP port default value is 69. The FTP port default value is 21. The SFTP port default value is 2… |
| 1.3.6.1.4.1.2011.6.128.1.1.2.43 | TablehwGponDeviceOntConfigInfoTable | not-accessible | current | This table is used to create, modify, delete or query an ONT. The index of this table is a combination of ifIndex and hwGponDeviceOntIndex. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.43.1 | RowhwGponDeviceOntConfigInfoEntry | not-accessible | current | This table is used to create, modify, delete or query an ONT. The index of this entry is a combination of ifIndex and hwGponDeviceOntIndex. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.43.1.1 | ColumnhwGponDeviceOntIndex | not-accessible | current | This object indicates the ONT ID, range: 0-127. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.43.1.2 | ColumnhwGponDeviceOntAuthMethod | read-write | current | This object indicates the authentication mode for the ONT. Options: 1. sn(1) - Serial Number 2. snpassword(2) - SN and password 3. alwayson(3) - Password + alw… |
| 1.3.6.1.4.1.2011.6.128.1.1.2.43.1.3 | ColumnhwGponDeviceOntSn | read-write | current | This object indicates the configured ONT serial number. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.43.1.4 | ColumnhwGponDeviceOntPassword | read-write | current | This object indicates the ONT password. GPON password size (0..10) XG-PON password size (0..36) |
| 1.3.6.1.4.1.2011.6.128.1.1.2.43.1.5 | ColumnhwGponDeviceOntTimeOut | read-write | current | This object indicates the registered working period of the ONT, ranging from 1 to 168 hours. The value (-1) indicates that there is no-aging time. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.43.1.6 | ColumnhwGponDeviceOntManagementMode | read-write | current | This object indicates the ONT management mode, including OMCI and SNMP. Options: 1. omci(1) - OMCI 2. snmp(2) - SNMP 3. extendFrame(3) - extendFrame 4. invalid… |
| 1.3.6.1.4.1.2011.6.128.1.1.2.43.1.7 | ColumnhwGponDeviceOntLineProfName | read-write | current | This object indicates the name of the profile that is bound to the ONT. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.43.1.8 | ColumnhwGponDeviceOntServiceProfName | read-write | current | This object indicates the name of the service profile that is bound to the ONT. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.43.1.9 | ColumnhwGponDeviceOntDespt | read-write | current | This object indicates the description of the ONT. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.43.1.10 | ColumnhwGponDeviceOntEntryStatus | read-create | current | This object is used to create a new row or to modify or delete an existing row in this table. Options: 1. createAndGo(4) -create a new instance of a conceptual… |
| 1.3.6.1.4.1.2011.6.128.1.1.2.43.1.11 | ColumnhwGponDeviceOntProtectSide | read-write | current | This object indicates whether the ONT is the ONT on the protection side. Options: 1. protectside(1) - Indicates that the ONT is the ONT on the protection side … |
| 1.3.6.1.4.1.2011.6.128.1.1.2.43.1.12 | ColumnhwGponDeviceOntPGMemberRole | read-only | current | This object indicates the role of the ont in the protect group. Options: 1. work(1) - Indicates that the role of the ONT is work 2. protect(2) - Indicates that… |
| 1.3.6.1.4.1.2011.6.128.1.1.2.43.1.13 | ColumnhwGponDeviceOntLoid | read-write | current | The object indicates the LOID of the ONT. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.43.1.14 | ColumnhwGponDeviceOntCheckcode | read-write | current | The object indicates the checkcode of the ONT. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.43.1.15 | ColumnhwGponDeviceOntReregisterAuthMode | read-write | current | Indicate the type of the ont re-register type for once-on authentication mode, if the ont authentication mode is not once-on, the value is invalid. if the ont … |
| 1.3.6.1.4.1.2011.6.128.1.1.2.43.1.16 | ColumnhwGponDeviceOntInfoAuthEffectMode | read-write | current | Indicates the effect taking mode after the ONT authentication mode is changed. The default effect taking mode is immediate. Options: 1. immediate (1) -Indicate… |
| 1.3.6.1.4.1.2011.6.128.1.1.2.43.1.17 | ColumnhwGponDeviceOntNniType | read-write | current | This object indicates the NNI type of the ONT. Options: 1. rate2dot5G1dot25G (1) -Downstream rate 2.5Gbps, upstream rate 1.25Gbps. 2. rate10G2dot5G (2) -Downst… |
| 1.3.6.1.4.1.2011.6.128.1.1.2.43.1.18 | ColumnhwGponDeviceOntManualSwitchChannelIfindex | read-write | current | Indicates the destination channel's ifindex that the ont switch to. Only the ont under a dynamic channel group support to switch channel. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.44 | TablehwGponDeviceOntExtendConfigTable | not-accessible | current | This is the ONT extend function configuration table. The index of this table is a combination of ifIndex and hwGponDeviceOntIndex. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.44.1 | RowhwGponDeviceOntExtendConfigEntry | not-accessible | current | This is the ONT extend function configuration table. The index of this entry is a combination of ifIndex and hwGponDeviceOntIndex. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.44.1.1 | ColumnhwGponDeviceOntCfgAlarmProfileName | read-write | current | The name of the ONT alarm profile. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.44.1.2 | ColumnhwGponDeviceOntCfgSnmpProfileName | read-write | current | The name of the ONT SNMP profile. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.44.1.3 | ColumnhwGponDeviceOntExtCfgOpticAlarmProfileName | read-write | current | This object indicates the name of the optical alarm profile that is bound to the ONT. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.45 | TablehwGponDeviceOntVersionInfoTable | not-accessible | current | This is the ONT version information table. The index of this table is a combination of ifIndex and hwGponDeviceOntIndex. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.45.1 | RowhwGponDeviceOntVersionInfoEntry | not-accessible | current | This is the ONT version information table. The index of this entry is a combination of ifIndex and hwGponDeviceOntIndex. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.45.1.1 | ColumnhwGponDeviceOntVersion | read-only | current | The ONT version number. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.45.1.2 | ColumnhwGponDeviceOntVendorId | read-only | current | This object indicates the ONT VendorID. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.45.1.3 | ColumnhwGponDeviceOntProductId | read-only | current | This object indicates the ONT productID. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.45.1.4 | ColumnhwGponDeviceOntEquipmentId | read-only | current | This object indicates the ONT equipmentID. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.45.1.5 | ColumnhwGponDeviceOntMainSoftVer | read-only | current | The active softerware version of the ONT. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.45.1.6 | ColumnhwGponDeviceOntStandbySoftVer | read-only | current | The standby software version of the ONT. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.45.1.7 | ColumnhwGponDeviceOntSoftwareWorkMode | read-only | current | The object indicates the software working mode of the GPON ONT. Options: 1. normal(1) - Normal 2. survivalmode(2) - Survival mode |
| 1.3.6.1.4.1.2011.6.128.1.1.2.45.1.8 | ColumnhwGponDeviceOntCustomizedInfo | read-only | current | This object indicates the ONT customize information. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.46 | TablehwGponDeviceOntControlInfoTable | not-accessible | current | This is the control table of the ONT. The index of this table is a combination of ifIndex and hwGponDeviceOntIndex. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.46.1 | RowhwGponDeviceOntControlInfoEntry | not-accessible | current | This is the control table of the ONT. The index of this entry is a combination of ifIndex and hwGponDeviceOntIndex. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.46.1.1 | ColumnhwGponDeviceOntControlActive | read-write | current | This object is used to activate or deactivate an ONT. Options: 1. activate(1) - Activates an ONT 2. deactivate(2) - Deactivate an ONT 3. invalid(-1) - Indicate… |
| 1.3.6.1.4.1.2011.6.128.1.1.2.46.1.2 | ColumnhwGponDeviceOntControlReset | read-write | current | This object is used to reset an ONT. Options: 1. reset(1) - Reset an ONT 2. invalid(-1) - Indicates that the query fails or no information is detected |
| 1.3.6.1.4.1.2011.6.128.1.1.2.46.1.3 | ColumnhwGponDeviceOntControlReRegister | read-write | current | This object is used to re-register an ONT. Options: 1. reRegister(1) - Re-register an ONT 2. invalid(-1) - Indicates that the query fails or no information is … |
| 1.3.6.1.4.1.2011.6.128.1.1.2.46.1.4 | ColumnhwGponDeviceOntControlReDiscovery | read-write | current | This object is used to reset the discovery status of an ONT. If the authentication mode is once-on(4), after performing the rediscovery operation, the register… |
| 1.3.6.1.4.1.2011.6.128.1.1.2.46.1.15 | ColumnhwGponDeviceOntControlRunStatus | read-only | current | This object indicates the ONT running status. Options: 1. up(1) - Normal 2. down(2) - Fault 3. invalid(-1) - Indicates that the query fails or no information i… |
| 1.3.6.1.4.1.2011.6.128.1.1.2.46.1.16 | ColumnhwGponDeviceOntControlConfigStatus | read-only | current | This is the ONT configuration resume status. If it is failed(3), the ONT is down and the service is interrupted. If the config status is noresume (4), set the … |
| 1.3.6.1.4.1.2011.6.128.1.1.2.46.1.17 | ColumnhwGponDeviceOntControlDiscoveryStatus | read-only | current | This object indicates the ONT discovery state. Options: 1. on(1) - Indicates that the ONT discovery state is on 2. off(2) - Indicates that the ONT discovery st… |
| 1.3.6.1.4.1.2011.6.128.1.1.2.46.1.18 | ColumnhwGponDeviceOntControlMatchStatus | read-only | current | This object indicates the ONT match status. Options: 1. initialization(1) - Indicates that the ONT is initialization 2. match(2) - Indicates that the ONT is ma… |
| 1.3.6.1.4.1.2011.6.128.1.1.2.46.1.19 | ColumnhwGponDeviceOntControlDbaStatus | read-only | current | This object indicates the DBA report status. Options: 1. nsr(1) - NSR 2. sr(2) - SR 3. invalid(-1) - Indicates that the query fails or no information is detect… |
| 1.3.6.1.4.1.2011.6.128.1.1.2.46.1.20 | ColumnhwGponDeviceOntControlRanging | read-only | current | This object indicates the result of the ONT ranging. Unit: m Options: 1. invalid (-1) - Indicates that the query fails or no information is detected. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.46.1.21 | ColumnhwGponDeviceOntControlMacCount | read-only | current | This object indicates the number of MAC addresses that are learned by the ONT. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.46.1.22 | ColumnhwGponDeviceOntControlLastUpTime | read-only | current | This object indicates the time when the ONT last went online. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.46.1.23 | ColumnhwGponDeviceOntControlLastDownTime | read-only | current | This object indicates the time when the ONT last went offline. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.46.1.24 | ColumnhwGponDeviceOntControlLastDownCause | read-only | current | This object indicates the reason why the ONT last went offline. The value (1) indicates that the reason is LOS(Loss of signal), The value (2) indicates that th… |
| 1.3.6.1.4.1.2011.6.128.1.1.2.46.1.25 | ColumnhwGponDeviceOntControlLastDyingGaspTime | read-only | current | This object indicates the time when the ONT last went down due to Dying Gasp. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.46.1.26 | ColumnhwGponDeviceOntControlIsolationState | read-only | current | This object indicates the ONT isolation status. Options: 1. normal(0) - Indicates that the ONT is normal 2. isolated(1) - Indicates that the ONT is isolated |
| 1.3.6.1.4.1.2011.6.128.1.1.2.46.1.27 | ColumnhwGponDeviceOntControlBatteryCurStatus | read-only | current | This object indicates the ONT battery status. Options: 1. notSupport(0) - Not support 2. charge(1) - Charge state 3. discharge(2) - Discharge state 4. holding(… |
| 1.3.6.1.4.1.2011.6.128.1.1.2.46.1.28 | ColumnhwGponDeviceOntControlTcontNumCombined | read-only | current | The number of the combined T-CONTs. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.46.1.29 | ColumnhwGponDeviceOntControlLastRanging | read-only | current | This object indicates the result of the ONT last ranging. Unit: m Options: 1. invalid (-1) - Indicates that the query fails or no information is detected. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.46.1.30 | ColumnhwGponDeviceOntControlActualSn | read-only | current | The ONT's actual serial number. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.47 | TablehwGponDeviceOntCfgCapabilityTable | not-accessible | current | The ONT configuration capability table. The index of this table is a combination of ifIndex and hwGponDeviceOntIndex. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.47.1 | RowhwGponDeviceOntCfgCapabilityEntry | not-accessible | current | The ONT configuration capability table. The index of this entry is a combination of ifIndex and hwGponDeviceOntIndex. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.47.1.1 | ColumnhwGponDeviceOntCfgCapManagementMode | read-only | current | This object indicates the ONT's management mode, including omci and snmp. Options: 1. omci(1) - OMCI 2. snmp(2) - SNMP 3. extendFrame(3) - Extend Frame 4. inva… |
| 1.3.6.1.4.1.2011.6.128.1.1.2.47.1.2 | ColumnhwGponDeviceOntCfgCapEthNum | read-only | current | This object indicates the number of ethernet ports. A special value of 0xFE (254) indicates the number of port is adaptive. The value is -1 when the query fail… |
| 1.3.6.1.4.1.2011.6.128.1.1.2.47.1.3 | ColumnhwGponDeviceOntCfgCapPotsNum | read-only | current | This object indicates the number of POTS ports. A special value of 0xFE (254) indicates the number of port is adaptive The value is -1 when the query fails or … |
| 1.3.6.1.4.1.2011.6.128.1.1.2.47.1.4 | ColumnhwGponDeviceOntCfgCapIPSupport | read-only | current | This object indicates the IP address configuration mode. Options: 1. dhcp(1) - DHCP 2. static(2) - Indicates that the IP address configuration mode is static 3… |
| 1.3.6.1.4.1.2011.6.128.1.1.2.47.1.5 | ColumnhwGponDeviceOntCfgCapTdmPortType | read-only | current | This object indicates the TDM port type. Options: 1. t1(13) - T1 2. e1(14) - E1 3. invalid(-1) - Indicates that the query fails or no information is detected |
| 1.3.6.1.4.1.2011.6.128.1.1.2.47.1.6 | ColumnhwGponDeviceOntCfgCapTdmServiceType | read-only | current | This object indicates the TDM service type. Options: 1. tdmovergem(1) - Tdm over gem 2. cesop(2) - Cesop 3. invalid(-1) - Indicates that the query fails or no … |
| 1.3.6.1.4.1.2011.6.128.1.1.2.47.1.7 | ColumnhwGponDeviceOntCfgCapTdmNum | read-only | current | This object indicates the number of TDM ports. The value is -1 when the query fails or no information is detected. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.47.1.8 | ColumnhwGponDeviceOntCfgCapMocaNum | read-only | current | This object indicates the number of MOCA ports. The value is -1 when the query fails or no information is detected. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.47.1.9 | ColumnhwGponDeviceOntCfgCapCatvUniNum | read-only | current | This object indicates the number of CATV UNI ports. A special value of 0xFE (254) indicates the number of port is adaptive The value is -1 when the query fails… |
| 1.3.6.1.4.1.2011.6.128.1.1.2.47.1.10 | ColumnhwGponDeviceOntCfgCapGemNum | read-only | current | This object indicates the number of GEM ports. The value is -1 when the query fails or no information is detected. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.47.1.11 | ColumnhwGponDeviceOntCfgCapGemMappingMode | read-only | current | This object indicates the mapping mode. Options: 1. vlan(1) - The mapping mode is vlan 2. pri8021p(2) - The mapping mode is 802.1p 3. vlanpri(3) - The mapping … |
| 1.3.6.1.4.1.2011.6.128.1.1.2.47.1.12 | ColumnhwGponDeviceOntCfgCapTcontNum | read-only | current | This object indicates the number of T-CONTs. The value is -1 when the query fails or no information is detected. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.47.1.13 | ColumnhwGponDeviceOntCfgCapFCType | read-only | current | This object indicates the type of flow control. Options: 1. pq(1) - The type of flow control is PQ 2. gemportcar(2) - The type of flow control is the gemportca… |
| 1.3.6.1.4.1.2011.6.128.1.1.2.47.1.14 | ColumnhwGponDeviceOntCfgCapVdslPortNum | read-only | current | This object indicates the number of VDSL ports. A special value of 0xFE (254) indicates the number of port is adaptive. The value is -1 when the query fails or… |
| 1.3.6.1.4.1.2011.6.128.1.1.2.48 | TablehwGponDeviceAutoFindOntInfoTable | not-accessible | current | This table is used to query the information about the auto-found ONTs in the system. The index of this table is a combination of ifIndex and hwGponDeviceAutoFi… |
| 1.3.6.1.4.1.2011.6.128.1.1.2.48.1 | RowhwGponDeviceAutoFindOntInfoEntry | not-accessible | current | This table is used to query the information about the auto-found ONTs in the system. The index of this entry is a combination of ifIndex and hwGponDeviceAutoFi… |
| 1.3.6.1.4.1.2011.6.128.1.1.2.48.1.1 | ColumnhwGponDeviceAutoFindOntInfoOntIndex | not-accessible | current | The index of the auto-found ONT. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.48.1.2 | ColumnhwGponDeviceAutoFindOntInfoSn | read-only | current | This object indicates the ONT serial number. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.48.1.3 | ColumnhwGponDeviceAutoFindOntInfoPassword | read-only | current | This object indicates the ONT password. GPON password size (0..10) XG-PON password size (0..36) |
| 1.3.6.1.4.1.2011.6.128.1.1.2.48.1.4 | ColumnhwGponDeviceAutoFindOntInfoOntVendorId | read-only | current | This object indicates the ONT vendorid. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.48.1.5 | ColumnhwGponDeviceAutoFindOntInfoOntVer | read-only | current | This object indicates the ONT Version. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.48.1.6 | ColumnhwGponDeviceAutoFindOntInfoOntMainSoftVer | read-only | current | This object indicates the ONT MainSoftVer. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.48.1.7 | ColumnhwGponDeviceAutoFindOntInfoOntEquipmentId | read-only | current | This object indicates the ONT EquipmentId. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.48.1.8 | ColumnhwGponDeviceAutoFindOntInfoOntAutoFindTime | read-only | current | This object indicates the time for ONT's auto find. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.48.1.9 | ColumnhwGponDeviceAutoFindOntInfoLoid | read-only | current | This object indicates the ONT LOID. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.48.1.10 | ColumnhwGponDeviceAutoFindOntInfoCheckcode | read-only | current | This object indicates the ONT CHECKCODE |
| 1.3.6.1.4.1.2011.6.128.1.1.2.48.1.11 | ColumnhwGponDeviceAutoFindOntInfoCustomizedInfo | read-only | current | This object indicates the ONT customize information. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.48.1.12 | ColumnhwGponDeviceAutoFindOntInfoOntNniType | read-only | current | This object indicates the ONT actual rate type. Options: 1. rate2dot5G1dot25G(1) - Downstream rate 2.5Gbps, upstream rate 1.25Gbps 2. rate10G2dot5G(2) - Downst… |
| 1.3.6.1.4.1.2011.6.128.1.1.2.49 | TablehwGponDeviceOntIpConfigInfoTable | not-accessible | current | This is the ONT IP configuration table. This table is used to configure and query the IP configuration mode and IP address of an ONT. The index of this table i… |
| 1.3.6.1.4.1.2011.6.128.1.1.2.49.1 | RowhwGponDeviceOntIpConfigInfoEntry | not-accessible | current | This is the ONT IP configuration table. This table is used to configure and query the IP configuration mode and IP address of an ONT. The index of this entry i… |
| 1.3.6.1.4.1.2011.6.128.1.1.2.49.1.1 | ColumnhwGponDeviceOntIpConfigMode | read-write | current | This object indicates the IP configuration mode. Options: 1. dhcp(1) - DHCP 2. static(2) - Indicates that the IP configuration mode is static 3. unconfiguratio… |
| 1.3.6.1.4.1.2011.6.128.1.1.2.49.1.2 | ColumnhwGponDeviceOntIpAddress | read-write | current | This object indicates the IP address. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.49.1.3 | ColumnhwGponDeviceOntNetMask | read-write | current | This object indicates the Subnet mask. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.49.1.4 | ColumnhwGponDeviceOntPhyAddress | read-only | current | This object indicates the ONT MAC address. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.49.1.5 | ColumnhwGponDeviceOntNetGateway | read-write | current | This object indicates the default network gateway. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.49.1.6 | ColumnhwGponDeviceOntMasterDNS | read-write | current | This object indicates the active DNS address. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.49.1.7 | ColumnhwGponDeviceOntSlaveDNS | read-write | current | This object indicates the slave DNS address. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.49.1.8 | ColumnhwGponDeviceOntIpConfigVlan | read-write | current | This object indicates the management VLAN of ONT. range: 0-4095 |
| 1.3.6.1.4.1.2011.6.128.1.1.2.49.1.9 | ColumnhwGponDeviceOntIpConfigPriority | read-write | current | The management priority of ONT. range: 0-7, 0xfe: dscpMapping, -1: invalid value. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.49.1.10 | ColumnhwGponDeviceOntIpIndex | not-accessible | current | This object indicates the IP index of the ont IP host |
| 1.3.6.1.4.1.2011.6.128.1.1.2.49.1.11 | ColumnhwGponDeviceOntIpconfigDscpDefaultPriority | read-write | current | This object indicates the default priority for dscpMapping policy. range: 0-7 |
| 1.3.6.1.4.1.2011.6.128.1.1.2.49.1.12 | ColumnhwGponDeviceOntIpconfigDscpProfIndex | read-write | current | This object indicates the dscp profile index of the ONT ip host. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.49.1.13 | ColumnhwGponDeviceOntIpconfigDhcpReset | read-write | current | This object is used for resetting the ip host in the DHCP mode. Options: 1. reset(1) - DHCP reset in the DHCP mode 2. invalid(-1) - invalid |
| 1.3.6.1.4.1.2011.6.128.1.1.2.50 | TablehwGponDeviceOntAlarmStateInfoTable | not-accessible | current | The table is used to query the state of the ONT alarms. The index of this table is a combination of ifIndex and hwGponDeviceOntIndex. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.50.1 | RowhwGponDeviceOntAlarmStateInfoEntry | not-accessible | current | The table is used to query the state of the ONT alarms. The index of this entry is a combination of ifIndex and hwGponDeviceOntIndex. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.50.1.1 | ColumnhwGponDeviceOntAlarmSDi | read-only | current | This object indicates the signal degrade (SDi) alarm. 1: no alarm is generated; 2: alarm is generated. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.50.1.2 | ColumnhwGponDeviceOntAlarmSFi | read-only | current | This object indicates the signal fail (SFi) alarm. 1: no alarm is generated; 2: alarm is generated. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.50.1.3 | ColumnhwGponDeviceOntAlarmDOWi | read-only | current | This object indicates the the ONU DOWi alarm. 1: no alarm is generated; 2: alarm is generated. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.50.1.4 | ColumnhwGponDeviceOntAlarmLOSi | read-only | current | This object indicates the loss of frame (LOSi) alarm. 1: no alarm is generated; 2: alarm is generated. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.50.1.5 | ColumnhwGponDeviceOntObjAlarmStateRDIi | read-only | current | This object indicates the remote defect indication (RDIi) alarm 1: no alarm is generated; 2: alarm is generated. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.51 | TablehwGponDeviceOntOpticalDdmInfoTable | not-accessible | current | The table is used to query the information of the ONT Optical module. The index of this table is a combination of ifIndex and hwGponDeviceOntIndex. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.51.1 | RowhwGponDeviceOntOpticalDdmInfoEntry | not-accessible | current | The table is used to query the information of the ONT Optical module. The index of this entry is a combination of ifIndex and hwGponDeviceOntIndex. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.51.1.1 | ColumnhwGponOntOpticalDdmTemperature | read-only | current | The temperature of the optical module, unit C(centigrade). |
| 1.3.6.1.4.1.2011.6.128.1.1.2.51.1.2 | ColumnhwGponOntOpticalDdmBiasCurrent | read-only | current | The Bias Current of the optical module, unit mA. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.51.1.3 | ColumnhwGponOntOpticalDdmTxPower | read-only | current | The transmitting power of the optical module, unit 0.01dBm. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.51.1.4 | ColumnhwGponOntOpticalDdmRxPower | read-only | current | The receiving power of the optical module, unit 0.01dBm. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.51.1.5 | ColumnhwGponOntOpticalDdmVoltage | read-only | current | The power feed voltage of the optical module, unit mV. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.51.1.6 | ColumnhwGponOntOpticalDdmOltRxOntPower | read-only | current | The ONT optical power received on the OLT, unit dBm. The relationship between the actual value and the value get from this leaf node is as follows, Actual valu… |
| 1.3.6.1.4.1.2011.6.128.1.1.2.51.1.7 | ColumnhwGponOntOpticalDdmAniCATVRxPower | read-only | current | Indicates the CATV receiving optical power of the optical module, unit 0.01dBm. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.52 | TablehwGponDeviceOntRegisterInfoTable | not-accessible | current | This table is used to query the register information about the ONT, including the ONT SN, register time and register result. The index of this table is a combi… |
| 1.3.6.1.4.1.2011.6.128.1.1.2.52.1 | RowhwGponDeviceOntRegisterInfoEntry | not-accessible | current | This table is used to query the register information about the ONT, including the ONT SN, register time and register result. The index of this entry is a combi… |
| 1.3.6.1.4.1.2011.6.128.1.1.2.52.1.1 | ColumnhwGponDeviceOntRegisterSerialNum | not-accessible | current | This object indicates the register number. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.52.1.2 | ColumnhwGponDeviceOntRegisterSn | read-only | current | This object indicates the ONT serial number. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.52.1.3 | ColumnhwGponDeviceOntRegisterResult | read-only | current | This object indicates the register result. Options: 1. success(1) - Indicates that the register result is success 2. fail(2) - Indicates that the register resu… |
| 1.3.6.1.4.1.2011.6.128.1.1.2.52.1.4 | ColumnhwGponDeviceOntRegisterTime | read-only | current | This object indicates the register time. -1 is the invalid value. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.52.1.5 | ColumnhwGponDeviceOntRegisterConflictedIfindex | read-only | current | This object indicates the ifIndex of the conflicted ONT. -1 is the invalid value. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.52.1.6 | ColumnhwGponDeviceOntRegisterConflictedOntIndex | read-only | current | This object indicates the index of the conflicted ONT. -1 is the invalid value. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.52.1.7 | ColumnhwGponDeviceOntRegisterOntPassword | read-only | current | This object indicates the ONT password GPON password size (0..10) XG-PON password size (0..36) |
| 1.3.6.1.4.1.2011.6.128.1.1.2.52.1.8 | ColumnhwGponDeviceOntRegisterOntVendorId | read-only | current | This object indicates the ONT vendor ID. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.52.1.9 | ColumnhwGponDeviceOntRegisterOntVersion | read-only | current | This object indicates the ONT version. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.52.1.10 | ColumnhwGponDeviceOntRegisterOntMainSoftVersion | read-only | current | This object indicates the ONT mainsoft version. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.52.1.11 | ColumnhwGponDeviceOntRegisterOntEquipmentId | read-only | current | This object indicates the ONT equipment ID. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.52.1.12 | ColumnhwGponDeviceOntRegisterOntLoid | read-only | current | This object indicates the ONT LOID. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.52.1.13 | ColumnhwGponDeviceOntRegisterOntCheckcode | read-only | current | This object indicates the ONT CHECKCODE |
| 1.3.6.1.4.1.2011.6.128.1.1.2.52.1.14 | ColumnhwGponDeviceOntRegisterOntNniType | read-only | current | This object indicates the ONT actual rate type. Options: 1. rate2dot5G1dot25G(1) - Downstream rate 2.5Gbps, upstream rate 1.25Gbps 2. rate10G2dot5G(2) - Downst… |
| 1.3.6.1.4.1.2011.6.128.1.1.2.53 | TablehwEponDeviceOntConfigInfoTable | not-accessible | current | This table is used to create, modify, delete or query an ONT. The index of this table is a combination of ifIndex and hwEponDeviceOntIndex. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.53.1 | RowhwEponDeviceOntConfigInfoEntry | not-accessible | current | This table is used to create, modify, delete or query an ONT. The index of this entry is a combination of ifIndex and hwEponDeviceOntIndex. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.53.1.1 | ColumnhwEponDeviceOntIndex | not-accessible | current | This object indicates the ONT ID, range: 0~254. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.53.1.2 | ColumnhwEponDeviceOntAuthMode | read-write | current | This object indicates the authentication mode for the ONT. Options: 1. onceon(1) - The authentication mode is once on 2. alwayson(2) - The authentication mode … |
| 1.3.6.1.4.1.2011.6.128.1.1.2.53.1.3 | ColumnhwEponDeviceOntMacAddress | read-write | current | This object indicates the ONT MAC. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.53.1.4 | ColumnhwEponDeviceOntPassword | read-write | current | This object indicates the ONT password. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.53.1.5 | ColumnhwEponDeviceOntTimeout | read-write | current | This object indicates the registered working period of the ONT, ranging from 1 to 168 hours. The value (-1) indicates that there is no-aging time. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.53.1.6 | ColumnhwEponDeviceOntManagementMode | read-write | current | This object indicates the ONT management mode, including OAM and SNMP. Options: 1. oam(1) - OAM 2. snmp(2) - SNMP 3. invalid(-1) - Indicates that the query fai… |
| 1.3.6.1.4.1.2011.6.128.1.1.2.53.1.7 | ColumnhwEponDeviceOntLineProfName | read-write | current | This object indicates the name of the line profile that is bound to the ONT. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.53.1.8 | ColumnhwEponDeviceOntServiceProfName | read-write | current | This object indicates the name of the service profile that is bound to the ONT. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.53.1.9 | ColumnhwEponDeviceOntDespt | read-write | current | This object indicates the description of the ONT. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.53.1.10 | ColumnhwEponDeviceOntEntryStatus | read-create | current | This object is used to create a new row or to modify or delete an existing row in this table. Options: 1. createAndGo(4) -create a new instance of a conceptual… |
| 1.3.6.1.4.1.2011.6.128.1.1.2.53.1.11 | ColumnhwEponDeviceOntProtectSide | read-write | current | This object indicates whether the ONT is the ONT on the protection side. Options: 1. protectside(1) - Indicates that the ONT is the ONT on the protection side … |
| 1.3.6.1.4.1.2011.6.128.1.1.2.53.1.12 | ColumnhwEponDeviceOntObjectLoid | read-write | current | This object indicates the ONT LOID. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.53.1.13 | ColumnhwEponDeviceOntObjectCheckcode | read-write | current | This object indicates the ONT CHECKCODE. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.53.1.14 | ColumnhwEponDeviceLineProfileServiceSlaProfileIndex | read-write | current | This object indicates the index of SLA profile |
| 1.3.6.1.4.1.2011.6.128.1.1.2.53.1.15 | ColumnhwEponDeviceOntPGMemberRole | read-only | current | Indicate the role of the ont in the protect group, Options: 1. work(1) - Indicates that the role of the ONT is work 2. protect(2) - Indicates that the role of … |
| 1.3.6.1.4.1.2011.6.128.1.1.2.53.1.16 | ColumnhwEponDeviceOntAuthEffectMode | read-write | current | Indicates the effect taking mode after the ONT authentication mode is changed. The default effect taking mode is immediate. Options: 1. immediate (1) -Indicate… |
| 1.3.6.1.4.1.2011.6.128.1.1.2.53.1.17 | ColumnhwEponDeviceOntNniType | read-write | current | This object indicates the ONT rate type. Options: 1. rate1G1G(1) - Downstream rate 1Gbps, upstream rate 1Gbps 2. rate10G1G(2) - Downstream rate 10Gbps, upstrea… |
| 1.3.6.1.4.1.2011.6.128.1.1.2.54 | TablehwEponDeviceOntExtendConfigTable | not-accessible | current | This is the ONT extend function configuration table. The index of this table is a combination of ifIndex and hwEponDeviceOntIndex. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.54.1 | RowhwEponDeviceOntExtendConfigEntry | not-accessible | current | This is the ONT extend function configuration table. The index of this entry is a combination of ifIndex and hwEponDeviceOntIndex. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.54.1.1 | ColumnhwEponDeviceOntCfgSnmpProfileName | read-write | current | This object indicates the name of the ONT SNMP profile. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.54.1.2 | ColumnhwEponDeviceOntCfgMulticastMode | read-write | current | This object indicates the XPON service profile multicast mode. Options: 1. ctc(1) - Indicates that the XPON service profile multicast mode is CTC 2. igmpsnoopi… |
| 1.3.6.1.4.1.2011.6.128.1.1.2.54.1.3 | ColumnhwEponDeviceOntExtCfgOpticAlarmProfileName | read-write | current | This object indicates the name of the optical alarm profile that is bound to the ONT. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.54.1.4 | ColumnhwEponDeviceOntExtCfgAlarmProfileName | read-write | current | This object indicates the name of the alarm profile that is bound to the ONT PON port. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.54.1.5 | ColumnhwEponDeviceOntExtCfgWarningProfileName | read-write | current | This object indicates the name of the warning profile that is bound to the ONT PON port. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.55 | TablehwEponDeviceOntVersionInfoTable | not-accessible | current | This is the ONT version information table. The index of this table is a combination of ifIndex and hwEponDeviceOntIndex. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.55.1 | RowhwEponDeviceOntVersionInfoEntry | not-accessible | current | This is the ONT version information table. The index of this entry is a combination of ifIndex and hwEponDeviceOntIndex. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.55.1.1 | ColumnhwEponDeviceOntVendorId | read-only | current | This object indicates the ONT VendorID. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.55.1.2 | ColumnhwEponDeviceOntModel | read-only | current | This object indicates the ONT model. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.55.1.3 | ColumnhwEponDeviceOntOntIdentifier | read-only | current | This object indicates the ONT identifier. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.55.1.4 | ColumnhwEponDeviceOntHardwareVersion | read-only | current | This object indicates the hardware version of the ONT. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.55.1.5 | ColumnhwEponDeviceOntSoftwareVersion | read-only | current | This object indicates the software version of the ONT. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.55.1.6 | ColumnhwEponDeviceOntChipVendorID | read-only | current | This object indicates the verder ID of the ONT's chip. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.55.1.7 | ColumnhwEponDeviceOntChipModel | read-only | current | This object indicates the model of the ONT's chip. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.55.1.8 | ColumnhwEponDeviceOntChipVersion | read-only | current | This object indicates the verion of the ONT's chip. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.55.1.9 | ColumnhwEponDeviceOntChipDesignDate | read-only | current | This object indicates the design data of the ONT's chip. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.55.1.10 | ColumnhwEponDeviceOntFirmwareVersion | read-only | current | This object indicates the firmware version of the ONT's chip. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.55.1.11 | ColumnhwEponDeviceOntChipRevision | read-only | current | This object indicates the firmware reversion of the ONT's chip. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.55.1.12 | ColumnhwEponDeviceOntSoftwareWorkMode | read-only | current | The object indicates the software working mode of the EPON ONT. Options: 1. normal(1) - Normal 2. survivalmode(2) - Survival mode |
| 1.3.6.1.4.1.2011.6.128.1.1.2.55.1.13 | ColumnhwEponDeviceOntExtendedModel | read-only | current | This object indicates the ONT extended model. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.55.1.14 | ColumnhwEponDeviceOntOuiVersion | read-only | current | This object indicates the highest version of ONT OUI. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.55.1.15 | ColumnhwEponDeviceOntExtendedFirmwareVersion | read-only | current | This object indicates the extended firmware version of the ONT's chip. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.55.1.16 | ColumnhwEponDeviceOntCustomizedInfo | read-only | current | This object indicates the ONT customize information. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.56 | TablehwEponDeviceOntCfgCapabilityTable | not-accessible | current | The EPON ONT configuration capability table. The index of this table is a combination of ifIndex and hwEponDeviceOntIndex. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.56.1 | RowhwEponDeviceOntCfgCapabilityEntry | not-accessible | current | The EPON ONT configuration capability table. The index of this entry is a combination of ifIndex and hwEponDeviceOntIndex. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.56.1.1 | ColumnhwEponDeviceOntCfgCapManageMode | read-only | current | This object indicates the ONT's management mode, including oam and snmp. Options: 1. oam(1) - OAM 2. snmp(2) - SNMP 3. invalid(-1) - Indicates that the query f… |
| 1.3.6.1.4.1.2011.6.128.1.1.2.56.1.2 | ColumnhwEponDeviceOntCfgCapPotsNum | read-only | current | This object indicates the number of POTS ports. A special value of 0xFE (254) indicates the number of port is adaptive. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.56.1.3 | ColumnhwEponDeviceOntCfgCapIPSupport | read-only | current | This object indicates the IP config mode. Options: 1. dhcp(1) - DHCP 2. static(2) - Indicates that the IP config mode is static 3. unconfiguration(3) - Indicat… |
| 1.3.6.1.4.1.2011.6.128.1.1.2.56.1.4 | ColumnhwEponDeviceOntCfgCapTdmPortType | read-only | current | This object indicates the TDM port type. Options: 1. t1(13) - T1 2. e1(14) - E1 3. invalid(-1) - Indicates that the query fails or no information is detected |
| 1.3.6.1.4.1.2011.6.128.1.1.2.56.1.5 | ColumnhwEponDeviceOntCfgCapTdmNum | read-only | current | This object indicates the number of TDM ports. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.56.1.6 | ColumnhwEponDeviceOntCfgCapEthNum | read-only | current | This object indicates the number ethernet ports. A special value of 0xFE (254) indicates the number of port is adaptive. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.57 | TablehwEponDeviceOntControlInfoTable | not-accessible | current | This is the control table of the ONT. The index of this table is a combination of ifIndex and hwEponDeviceOntIndex. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.57.1 | RowhwEponDeviceOntControlInfoEntry | not-accessible | current | This is the control table of the ONT. The index of this entry is a combination of ifIndex and hwEponDeviceOntIndex. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.57.1.1 | ColumnhwEponDeviceOntActive | read-write | current | This object is used to activate or deactivate an ONT. Options: 1. activate(1) - Activates an ONT 2. deactivate(2) - Deactivates an ONT 3. invalid (-1) - Indica… |
| 1.3.6.1.4.1.2011.6.128.1.1.2.57.1.2 | ColumnhwEponDeviceOntReset | read-write | current | This object is used to reset an ONT. Options: 1. reset(1) - Reset an ONT 2. invalid(-1) - Indicates that the query fails or no information is detected |
| 1.3.6.1.4.1.2011.6.128.1.1.2.57.1.3 | ColumnhwEponDeviceOntReRegister | read-write | current | This object is used to re-register an ONT. Options: 1. reRegister(1) - Re-register an ONT 2. invalid(-1) - Indicates that the query fails or no information is … |
| 1.3.6.1.4.1.2011.6.128.1.1.2.57.1.4 | ColumnhwEponDeviceOntReDiscovery | read-write | current | This object is used to reset the discovery status of an ONT. If the authentication mode is once-on(4), after performing the rediscovery operation, the register… |
| 1.3.6.1.4.1.2011.6.128.1.1.2.57.1.5 | ColumnhwEponDeviceOntPing | read-only | current | This object indicates the ONT ping. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.57.1.15 | ColumnhwEponDeviceOntRunStatus | read-only | current | This object indicates the ONT running status. Options: 1. up(1) - Normal 2. down(2) - Fault 3. invalid(-1) - Indicates that the query fails or no information i… |
| 1.3.6.1.4.1.2011.6.128.1.1.2.57.1.16 | ColumnhwEponDeviceOntConfigStatus | read-only | current | This is the ONT configuration resume status. If it is failed(3), the ONT is down and the service is interrupted. If the config status is noresume (4), set the … |
| 1.3.6.1.4.1.2011.6.128.1.1.2.57.1.17 | ColumnhwEponDeviceOntDiscoveryState | read-only | current | This object indicates the ONT discovery state. Options: 1. on(1) - Indicates that the ONT discovery state is on 2. off(2) - Indicates that the ONT discovery st… |
| 1.3.6.1.4.1.2011.6.128.1.1.2.57.1.18 | ColumnhwEponDeviceOntMatchStatus | read-only | current | This object indicates the ONT match status. Options: 1. initialization(1) - Indicates that the ONT is initialization 2. match(2) - Indicates that the ONT is ma… |
| 1.3.6.1.4.1.2011.6.128.1.1.2.57.1.19 | ColumnhwEponDeviceOntDistance | read-only | current | This object indicates the result of the ONT ranging. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.57.1.20 | ColumnhwEponDeviceOntRtt | read-only | current | This object indicates the result of the ONT ranging(RTT). |
| 1.3.6.1.4.1.2011.6.128.1.1.2.57.1.21 | ColumnhwEponDeviceOntUpStreamBW | read-only | current | This object indicates the upstream bandwidth of the ONT. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.57.1.22 | ColumnhwEponDeviceOntDownStreamBW | read-only | current | This object indicates the downstream bandwidth of the ONT. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.57.1.23 | ColumnhwEponDeviceOntLastUpTime | read-only | current | This object indicates the time when the ONT last goes online. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.57.1.24 | ColumnhwEponDeviceOntLastDownTime | read-only | current | This object indicates the time when the ONT last goes offline. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.57.1.25 | ColumnhwEponDeviceOntLastDownCause | read-only | current | This object indicates the reason why the ONT last went offline. The value (1) indicates that the reason is LOS(Loss of signal), The value (2) indicates that th… |
| 1.3.6.1.4.1.2011.6.128.1.1.2.57.1.26 | ColumnhwEponDeviceOntLastDyingGaspTime | read-only | current | This object indicates the time when the ONT last goes down due to Dying Gasp. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.57.1.27 | ColumnhwEponDeviceOntIsolationStatus | read-only | current | This object indicates the ONT isolation status. Options: 1. normal(0) - Indicates that the ONT is normal 2. isolated(1) - Indicates that the ONT is isolated |
| 1.3.6.1.4.1.2011.6.128.1.1.2.57.1.28 | ColumnhwEponDeviceOntActualNniType | read-only | current | This object indicates the ONT actual rate type. Options: 1. rate1G1G(1) - Downstream rate 1Gbps, upstream rate 1Gbps 2. rate10G1G(2) - Downstream rate 10Gbps, … |
| 1.3.6.1.4.1.2011.6.128.1.1.2.57.1.29 | ColumnhwEponDeviceOntLastActualNniType | read-only | current | This object indicates the ONT last actual rate type. Options: 1. rate1G1G(1) - Downstream rate 1Gbps, upstream rate 1Gbps 2. rate10G1G(2) - Downstream rate 10G… |
| 1.3.6.1.4.1.2011.6.128.1.1.2.57.1.30 | ColumnhwEponDeviceOntLastDistance | read-only | current | This object indicates the result of the ONT last ranging. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.58 | TablehwEponDeviceAutoFindOntInfoTable | not-accessible | current | The table is used to query ONT(s) that are found automatically. The index of this table is a combination of ifIndex and hwEponDeviceAutoFindOntInfoOntIndex. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.58.1 | RowhwEponDeviceAutoFindOntInfoEntry | not-accessible | current | The table is used to query ONT(s) that are found automatically. The index of this entry is a combination of ifIndex and hwEponDeviceAutoFindOntInfoOntIndex. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.58.1.1 | ColumnhwEponDeviceAutoFindOntInfoOntIndex | not-accessible | current | This object indicates the auto find ONT index, range: 0~254. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.58.1.2 | ColumnhwEponDeviceAutoFindOntInfoMacAddress | read-only | current | This object indicates the MAC address of ONT. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.58.1.3 | ColumnhwEponDeviceAutoFindOntInfoPasswordValue | read-only | current | This object indicates the password of ONT. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.58.1.4 | ColumnhwEponDeviceAutoFindOntInfoVendorId | read-only | current | This object indicates the Vendor identifier of ONT. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.58.1.5 | ColumnhwEponDeviceAutoFindOntInfoSoftwareVersion | read-only | current | This object indicates the Software version of ONT. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.58.1.6 | ColumnhwEponDeviceAutoFindOntInfoHardwareVersion | read-only | current | This object indicates the hardware version of ONT. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.58.1.7 | ColumnhwEponDeviceAutoFindOntInfoAutoFindTime | read-only | current | This object indicates the time for ONT's auto find. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.58.1.8 | ColumnhwEponDeviceAutoFindOntInfoOntModel | read-only | current | This object indicates the Mode of ONT. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.58.1.9 | ColumnhwEponDeviceAutoFindOntInfoLoid | read-only | current | This object indicates the ONT LOID. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.58.1.10 | ColumnhwEponDeviceAutoFindOntInfoCheckcode | read-only | current | This object indicates the ONT CHECKCODE. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.58.1.11 | ColumnhwEponDeviceAutoFindOntNniType | read-only | current | This object indicates the ONT actual rate type. Options: 1. rate1G1G(1) - Downstream rate 1Gbps, upstream rate 1Gbps 2. rate10G1G(2) - Downstream rate 10Gbps, … |
| 1.3.6.1.4.1.2011.6.128.1.1.2.58.1.12 | ColumnhwEponDeviceAutoFindOntInfoOntExtendedModel | read-only | current | This object indicates the ONT extended model. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.58.1.13 | ColumnhwEponDeviceAutoFindOntInfoOuiVersion | read-only | current | This object indicates the highest ONT OUI version |
| 1.3.6.1.4.1.2011.6.128.1.1.2.58.1.14 | ColumnhwEponDeviceAutoFindOntInfoCustomizedInfo | read-only | current | This object indicates the ONT customize information. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.59 | TablehwEponDeviceOntCapabilityInfoTable | not-accessible | current | This table is used to query the ONT capability set. The index of this table is a combination of ifIndex and hwEponDeviceOntIndex. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.59.1 | RowhwEponDeviceOntCapabilityInfoEntry | not-accessible | current | This table is used to query the ONT capability set. The index of this entry is a combination of ifIndex and hwEponDeviceOntIndex. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.59.1.1 | ColumnhwEponDeviceOntPOTSPortNum | read-only | current | This object indicates the number of POTS ports. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.59.1.2 | ColumnhwEponDeviceOntFEPortsNum | read-only | current | This object indicates the number of FE ports. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.59.1.3 | ColumnhwEponDeviceOntGEPortsNum | read-only | current | This object indicates the number of GE ports. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.59.1.4 | ColumnhwEponDeviceOntTDMPortsNum | read-only | current | This object indicates the number of TDM ports. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.59.1.5 | ColumnhwEponDeviceOntFECSupport | read-only | current | This object indicates whether the ONT supports the FEC. The value (1) indicates that the ONT supports the FEC. The value (2) indicates that the ONT not support… |
| 1.3.6.1.4.1.2011.6.128.1.1.2.59.1.6 | ColumnhwEponDeviceOntSupportbackupbattery | read-only | current | This object indicates whether the ONT supports the standby battery. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.59.1.7 | ColumnhwEponDeviceOntUpQueueAllocationIncre | read-only | current | This object indicates the increment of the allocated bandwidth of the upstream queue. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.59.1.8 | ColumnhwEponDeviceOntUpQueueNum | read-only | current | This object indicates the number of upstream queues. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.59.1.9 | ColumnhwEponDeviceOntUpQueueNumPerPort | read-only | current | This object indicates the maximum number of queues of the upsstream port. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.59.1.10 | ColumnhwEponDeviceOntDownQueueNum | read-only | current | This object indicates the number of downstream queues. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.59.1.11 | ColumnhwEponDeviceOntDownQueueNumPerPort | read-only | current | This object indicates the maximum number of queues of the downstream port. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.59.1.12 | ColumnhwEponDeviceOntFePortList | read-only | current | This object indicates the bitmap of the FE port. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.59.1.13 | ColumnhwEponDeviceOntGePortList | read-only | current | This object indicates the bitmap of the GE port. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.59.1.14 | ColumnhwEponDeviceOntSupportMulticastQuickLeave | read-only | current | This object indicates the multicast quick leave capability. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.59.1.15 | ColumnhwEponDeviceOntDeviceType | read-only | current | This object indicates the ONT device type. Options: 1. sfu(0) - SFU 2. hgu(1) - HGU 3. sbu(2) - SBU 4. boxShapedMDU(3) - Box shaped MDU 5. smallCapacityCardTyp… |
| 1.3.6.1.4.1.2011.6.128.1.1.2.59.1.16 | ColumnhwEponDeviceOntMultiLLID | read-only | current | This object indicates the ONT device multiLLID. -1 indicates an invalid value. A value from 1 to 255 indicates the number of supported LLIDs. In CTC Technical … |
| 1.3.6.1.4.1.2011.6.128.1.1.2.59.1.17 | ColumnhwEponDeviceOntProtectionType | read-only | current | This object indicates the ONT protection type. Options: 1. unsupport(0) - Do not support the ONT protection 2. typecProtection(1) - Type C protection 3. typedP… |
| 1.3.6.1.4.1.2011.6.128.1.1.2.59.1.18 | ColumnhwEponDeviceOntPonIFNum | read-only | current | This object indicates the ONT device ponIF number. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.59.1.19 | ColumnhwEponDeviceOntSlotNum | read-only | current | This object indicates the ONT device slot number. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.59.1.20 | ColumnhwEponDeviceOntADSL2plusNum | read-only | current | This object indicates the ONT device ADSL2 + port number |
| 1.3.6.1.4.1.2011.6.128.1.1.2.59.1.21 | ColumnhwEponDeviceOntVDSL2Num | read-only | current | This object indicates the ONT device VDSL2 port number. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.59.1.22 | ColumnhwEponDeviceOntWLANNum | read-only | current | This object indicates the ONT device WLAN port number. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.59.1.23 | ColumnhwEponDeviceOntUSBNum | read-only | current | This object indicates the ONT device USB port number. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.59.1.24 | ColumnhwEponDeviceOntCATVNum | read-only | current | This object indicates the ONT device CATV port number. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.59.1.25 | ColumnhwEponDeviceOntSupportIPv6Aware | read-only | current | This object indicates whether the ONT supports IPv6 aware. Options: 1.unsupport(1) - Indicates that the ONT does not support IPv6 aware. 2.support(2) - Indicat… |
| 1.3.6.1.4.1.2011.6.128.1.1.2.59.1.26 | ColumnhwEponDeviceOntSupportPowerSupplyControl | read-only | current | This object indicates whether the ONT supports power supply control. Options: 1. unsupport(1) - Indicates that the ONT does not support power supply control. 2… |
| 1.3.6.1.4.1.2011.6.128.1.1.2.59.1.27 | ColumnhwEponDeviceOntSupportServiceSLA | read-only | current | This object indicates whether the ONT supports service SLA. The value (1) indicates that the ONT does not support service SLA. The value (2-8) indicates the nu… |
| 1.3.6.1.4.1.2011.6.128.1.1.2.59.1.28 | ColumnhwEponDeviceOnt10GEPortsNum | read-only | current | This object indicates the number of 10GE ports. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.60 | TablehwEponDeviceOntIpConfigInfoTable | not-accessible | current | This is the ONT IP configuration table. This table is used to configure and query the IP configuration mode and IP address of an ONT. The index of this table i… |
| 1.3.6.1.4.1.2011.6.128.1.1.2.60.1 | RowhwEponDeviceOntIpConfigInfoEntry | not-accessible | current | This is the ONT IP configuration table. This table is used to configure and query the IP configuration mode and IP address of an ONT. The index of this entry i… |
| 1.3.6.1.4.1.2011.6.128.1.1.2.60.1.1 | ColumnhwEponDeviceOntIpConfigVlan | read-write | current | This object indicates the management VLAN. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.60.1.2 | ColumnhwEponDeviceOntIpAddress | read-write | current | This object indicates the IP address. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.60.1.3 | ColumnhwEponDeviceOntNetMask | read-write | current | This object indicates the subnet mask of the IP address. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.60.1.4 | ColumnhwEponDeviceOntNetGateway | read-write | current | This object indicates the default network gateway. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.60.1.5 | ColumnhwEponDeviceOntIpConfigRowStatus | read-create | current | The hwEponDeviceOntIpConfigRowStatus is used to create a new row or to modify or delete an existing row in this table. Options: 1. createAndGo(4) -create a new… |
| 1.3.6.1.4.1.2011.6.128.1.1.2.60.1.6 | ColumnhwEponDeviceOntIpConfigPriority | read-write | current | This object indicates the management priority of MDU. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.61 | TablehwEponDeviceOntRegInfoTable | not-accessible | current | This table is used to query the register information about the ONT, including the ONT MAC, register time and register result. The index of this table is a comb… |
| 1.3.6.1.4.1.2011.6.128.1.1.2.61.1 | RowhwEponDeviceOntRegInfoEntry | not-accessible | current | This table is used to query the register information about the ONT, including the ONT MAC, register time and register result. The index of this entry is a comb… |
| 1.3.6.1.4.1.2011.6.128.1.1.2.61.1.1 | ColumnhwEponDeviceSerialNum | not-accessible | current | This object indicates the register number. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.61.1.2 | ColumnhwEponDeviceRegOntMac | read-only | current | This object indicates the ONT MAC. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.61.1.3 | ColumnhwEponDeviceRegOntResult | read-only | current | This object indicates the register result. Options: 1. success(1) - Indicates that the register result is success 2. fail(2) - Indicates that the register resu… |
| 1.3.6.1.4.1.2011.6.128.1.1.2.61.1.4 | ColumnhwEponDeviceRegOntTime | read-only | current | This object indicates the register time. -1 is the invalid value. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.61.1.5 | ColumnhwEponDeviceRegConflictedIfindex | read-only | current | This object indicates the ifIndex of the conflicted ONT. -1 is the invalid value. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.61.1.6 | ColumnhwEponDeviceRegConflictedOntIndex | read-only | current | This object indicates the index of the conflicted ONT. -1 is the invalid value. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.61.1.7 | ColumnhwEponDeviceRegOntPasswordValue | read-only | current | This object indicates the ONT password. A valid value is reported only when hwEponDeviceRegOntResult is unconfirmed. A null is reported in other scenarios. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.61.1.8 | ColumnhwEponDeviceRegOntVendorId | read-only | current | This object indicates the ONT vendor ID. A valid value is reported only when hwEponDeviceRegOntResult is unconfirmed. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.61.1.9 | ColumnhwEponDeviceRegOntSoftwareVersion | read-only | current | This object indicates the Software version of ONT. A valid value is reported only when hwEponDeviceRegOntResult is unconfirmed. A null is reported in other sce… |
| 1.3.6.1.4.1.2011.6.128.1.1.2.61.1.10 | ColumnhwEponDeviceRegOntHardwareVersion | read-only | current | This object indicates the hardware version of ONT. A valid value is reported only when hwEponDeviceRegOntResult is unconfirmed. A null is reported in other sce… |
| 1.3.6.1.4.1.2011.6.128.1.1.2.61.1.11 | ColumnhwEponDeviceRegOntModel | read-only | current | This object indicates the Mode of ONT. A valid value is reported only when hwEponDeviceRegOntResult is unconfirmed. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.61.1.12 | ColumnhwEponDeviceRegOntLoid | read-only | current | This object indicates the ONT LOID. A valid value is reported only when hwEponDeviceRegOntResult is unconfirmed. A null is reported in other scenarios. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.61.1.13 | ColumnhwEponDeviceRegOntCheckcode | read-only | current | This object indicates the ONT CHECKCODE. A valid value is reported only when hwEponDeviceRegOntResult is unconfirmed. A null is reported in other scenarios. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.61.1.14 | ColumnhwEponDeviceRegOntRateType | read-only | current | This object indicates the ONT actual rate type. A valid value is reported only when hwEponDeviceRegOntResult is unconfirmed. Options: 1. rate1G1G(1) - Downstre… |
| 1.3.6.1.4.1.2011.6.128.1.1.2.61.1.15 | ColumnhwEponDeviceRegOntExtendedModel | read-only | current | This object indicates the ONT extended model. A valid value is reported only when hwEponDeviceRegOntResult is unconfirmed. A null is reported in other scenario… |
| 1.3.6.1.4.1.2011.6.128.1.1.2.61.1.16 | ColumnhwEponDeviceRegOntOuiVersion | read-only | current | This object indicates the highest ONT OUI version. A valid value is reported only when hwEponDeviceRegOntResult is unconfirmed. A null is reported in other sce… |
| 1.3.6.1.4.1.2011.6.128.1.1.2.62 | TablehwGponDeviceOntEthernetPortCfgTable | not-accessible | current | This is the ONT ETH port table, This table is used to set or query the attribute of the ONT ETH port, including duplex, transmission rate and native VLAN and o… |
| 1.3.6.1.4.1.2011.6.128.1.1.2.62.1 | RowhwGponDeviceOntEthernetPortCfgEntry | not-accessible | current | This is the ONT ETH port table, This table is used to set or query the attribute of the ONT ETH port, including duplex, transmission rate and native VLAN and o… |
| 1.3.6.1.4.1.2011.6.128.1.1.2.62.1.1 | ColumnhwGponDeviceOntEthernetPortId | not-accessible | current | This object indicates the ONT ETH port ID. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.62.1.2 | ColumnhwGponDeviceOntEthernetNegotiate | read-write | current | This object indicates the negotiation switch. The value (1) indicates that the negotiation switch is on. The value (2) indicates that the negotiation switch is… |
| 1.3.6.1.4.1.2011.6.128.1.1.2.62.1.3 | ColumnhwGponDeviceOntEthernetDuplexMode | read-write | current | This object indicates the duplex type of the port. Options: 1. half(1) - Forced half duplex 2. full(2) - Forced full duplex 3. autoneg(3) - Auto negotiation 4.… |
| 1.3.6.1.4.1.2011.6.128.1.1.2.62.1.4 | ColumnhwGponDeviceOntEthernetSpeed | read-write | current | This object indicates the transmission rate of the port. Options: 1. speed10M(1) - The forced transmission rate of the port is 10M 2. speed100M(2) - The forced… |
| 1.3.6.1.4.1.2011.6.128.1.1.2.62.1.5 | ColumnhwGponDeviceOntEthernetOperateStatus | read-write | current | This object indicates the switch of the port. Options: 1. on(1) - Indicates that the switch of the port is on 2. off(2) - Indicates that the switch of the port… |
| 1.3.6.1.4.1.2011.6.128.1.1.2.62.1.6 | ColumnhwGponDeviceOntEthernetFlowCtrlSwitch | read-write | current | This object is used to set the flow control switch of ONT port. Options: 1. on(1) - Indicates that the flow control switch of ONT port is on 2. off(2) - Indica… |
| 1.3.6.1.4.1.2011.6.128.1.1.2.62.1.7 | ColumnhwGponDeviceOntEthernetVlanDefault | read-write | current | This object indicates the native VLAN of the port. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.62.1.8 | ColumnhwGponDeviceOntEthernetVlanDefaultPriority | read-write | current | This object indicates the native VLAN priority of the port. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.62.1.21 | ColumnhwGponDeviceOntEthernetActualPortType | read-only | current | This object indicates the actual ETH port type of the ONT. The value (13) indicates that the port type is t1, The value (14) indicates that the port type is e1… |
| 1.3.6.1.4.1.2011.6.128.1.1.2.62.1.22 | ColumnhwGponDeviceOntEthernetOnlineState | read-only | current | This object indicates the status of ONT ETH port. Options: 1. linkup(1) - Indicates that the status of ONT ETH port is link up 2. linkdown(2) - Indicates that … |
| 1.3.6.1.4.1.2011.6.128.1.1.2.62.1.23 | ColumnhwGponDeviceOntEthernetUpStreamCarTrafficTableId | read-write | current | This object indicates the ONT ethernet port upstream car profile id (1~1024, 0xfffe-unconcern). |
| 1.3.6.1.4.1.2011.6.128.1.1.2.62.1.24 | ColumnhwGponDeviceOntEthernetDownStreamCarTrafficTableId | read-write | current | This object indicates the ONT ethernet port downstream car profile id (1~1024, 0xfffe-unconcern). |
| 1.3.6.1.4.1.2011.6.128.1.1.2.62.1.25 | ColumnhwGponDeviceOntEthernetPortIgmpForwardMode | read-write | current | The object is used to enable or disable the switch of ONT port IGMP forward mode. Options: 1. disable(1) - Disable the switch of ONT port IGMP forward mode 2. … |
| 1.3.6.1.4.1.2011.6.128.1.1.2.62.1.26 | ColumnhwGponDeviceOntEthernetPortRingStatus | read-only | current | The object is used to enable or disable the switch of ONT port IGMP forward mode. Options: 1. loop(1) - Indicates that the ring status of ONT ETH port is loop … |
| 1.3.6.1.4.1.2011.6.128.1.1.2.62.1.27 | ColumnhwGponDeviceOntEthernetUpStreamCarTrafficTableName | read-write | current | This object indicates the ONT ethernet port upstream car profile name. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.62.1.28 | ColumnhwGponDeviceOntEthernetDownStreamCarTrafficTableName | read-write | current | This object indicates the ONT ethernet port downstream car profile name. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.62.1.29 | ColumnhwGponDeviceOntEthernetRouteSwitch | read-only | current | This object indicates the actual route switch status of ONT ETH port. Options: 1. enable(1) - Indicates that the route switch status of ONT ETH port is enable … |
| 1.3.6.1.4.1.2011.6.128.1.1.2.62.1.30 | ColumnhwGponDeviceOntEthernetMode | read-only | current | Indicates the optical module status of the ONT ethernet port. Options: 1. electric(1) - Indicates that the mode status of ONT ETH port is electric 2. optic(2) … |
| 1.3.6.1.4.1.2011.6.128.1.1.2.62.1.31 | ColumnhwGponDeviceOntEthernetOpticalModuleStatus | read-only | current | The status of the ONT ethernet port. Options: 1. normal(1) - Indicates that the optical module status of ONT ETH port is normal 2. absence(2) - Indicates that … |
| 1.3.6.1.4.1.2011.6.128.1.1.2.62.1.32 | ColumnhwGponDeviceOntEthernetOnlineDuration | read-only | current | Indicates the online duration of the ONT ethernet port. Unit: second |
| 1.3.6.1.4.1.2011.6.128.1.1.2.63 | TablehwGponDeviceOntCatvPortCfgTable | not-accessible | current | This is the ONT CATV port table. The index of this table is a combination of ifIndex, hwGponDeviceOntIndex and hwGponDeviceOntCatvPortId. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.63.1 | RowhwGponDeviceOntCatvPortCfgEntry | not-accessible | current | This is the ONT CATV port table. The index of this entry is a combination of ifIndex, hwGponDeviceOntIndex and hwGponDeviceOntCatvPortId. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.63.1.1 | ColumnhwGponDeviceOntCatvPortId | not-accessible | current | This object indicates the ONT CATV port ID. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.63.1.2 | ColumnhwGponDeviceOntCatvOperateStatus | read-write | current | This object indicates the laser switch of ONT CATV port. Options: 1. on(1) - Indicates that the laser switch of ONT CATV port is on 2. off(2) - Indicates that … |
| 1.3.6.1.4.1.2011.6.128.1.1.2.63.1.3 | ColumnhwGponDeviceOntCatvOnlineStatus | read-only | current | This object indicates the link status of ONT CATV port. The value (1) indicates that the CATV port is online. The value (2) indicates that the CATV port is off… |
| 1.3.6.1.4.1.2011.6.128.1.1.2.63.1.4 | ColumnhwGponDeviceOntCatvFrequency | read-write | current | This object indicates the frequency of ONT CATV port. Options: 1. allPass(1) - Indicates that the frequency of ONT CATV port is all-pass 2. highPass(2) - Indic… |
| 1.3.6.1.4.1.2011.6.128.1.1.2.63.1.5 | ColumnhwGponDeviceOntCatvTxPower | read-only | current | This object indicates the Tx power of ONT CATV port. Unit: 0.001dBmV Options: 1. invalid(0x7FFFFFFF) - Indicates that the query fails or no information is dete… |
| 1.3.6.1.4.1.2011.6.128.1.1.2.64 | TablehwGponDeviceOntMocaPortCfgTable | not-accessible | current | This is the ONT MOCA port config table. The index of this table is a combination of ifIndex, hwGponDeviceOntIndex and hwGponDeviceOntMocaPortId. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.64.1 | RowhwGponDeviceOntMocaPortCfgEntry | not-accessible | current | This is the ONT MOCA port config table. The index of this entry is a combination of ifIndex, hwGponDeviceOntIndex and hwGponDeviceOntMocaPortId. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.64.1.1 | ColumnhwGponDeviceOntMocaPortId | not-accessible | current | This object indicates the ONT MOCA port ID. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.64.1.2 | ColumnhwGponDeviceOntMocaPortVlanDefault | read-write | current | This object indicates the native VLAN of the Moca port. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.64.1.3 | ColumnhwGponDeviceOntMocaPortVlanDefaultPri | read-write | current | This object indicates the native VLAN priority of the MOCA port. The range is from 0 to 7, and the value (-1) is invalid. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.65 | TablehwGponDeviceOntIpHostPortCfgTable | not-accessible | current | This is the ONT IPHOST port config table. The index of this table is a combination of ifIndex, hwGponDeviceOntIndex and hwGponDeviceOntIpHostPortId. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.65.1 | RowhwGponDeviceOntIpHostPortCfgEntry | not-accessible | current | This is the ONT IPHOST port config table. The index of this entry is a combination of ifIndex, hwGponDeviceOntIndex and hwGponDeviceOntIpHostPortId. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.65.1.1 | ColumnhwGponDeviceOntIpHostPortId | not-accessible | current | This object indicates the ONT IPHOST port ID. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.65.1.2 | ColumnhwGponDeviceOntIpHostPortVlanDefault | read-write | current | This object indicates the native VLAN of the IPHOST port. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.65.1.3 | ColumnhwGponDeviceOntIpHostPortVlanDefaultPri | read-write | current | This object indicates the native VLAN priority of the IPHOST port. The range is from 0 to 7, and the value (-1) is invalid. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.81 | TablehwEponDeviceOntEthernetPortCfgTable | not-accessible | current | This is the ONT ETH port config table. The index of this table is a combination of ifIndex, hwEponDeviceOntIndex and hwEponDeviceOntEthernetPortId. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.81.1 | RowhwEponDeviceOntEthernetPortCfgEntry | not-accessible | current | This is the ONT ETH port config table. The index of this entry is a combination of ifIndex, hwEponDeviceOntIndex and hwEponDeviceOntEthernetPortId. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.81.1.1 | ColumnhwEponDeviceOntEthernetPortId | not-accessible | current | This object indicates the ONT ETH port ID. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.81.1.2 | ColumnhwEponDeviceOntEthernetNegotiate | read-write | current | This object indicates the negotiation switch. Options: 1. auto(1) - Indicates that the negotiation switch is auto negotiation 2. neg(2) - Indicates that the ne… |
| 1.3.6.1.4.1.2011.6.128.1.1.2.81.1.3 | ColumnhwEponDeviceOntEthernetDuplexMode | read-write | current | This object indicates the duplex type of the port. Options: 1. half(1) - Forced half duplex 2. full(2) - Forced full duplex 3. autoneg(3) - Auto negotiation 4.… |
| 1.3.6.1.4.1.2011.6.128.1.1.2.81.1.4 | ColumnhwEponDeviceOntEthernetSpeed | read-write | current | This object indicates the transmission rate of the port. Options: 1. speed10M(10) - The forced transmission rate of the port is 10M 2. speed100M(100) - The for… |
| 1.3.6.1.4.1.2011.6.128.1.1.2.81.1.5 | ColumnhwEponDeviceOntEthernetVlanDefault | read-write | current | This object indicates the native VLAN of the port. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.81.1.7 | ColumnhwEponDeviceOntEthernetOperateStatus | read-write | current | This object indicates the switch of the port. Options: 1. on(1) - Indicates that the switch of the port is on 2. off(2) - Indicates that the switch of the port… |
| 1.3.6.1.4.1.2011.6.128.1.1.2.81.1.8 | ColumnhwEponDeviceOntEthernetFlowcontrolSwitch | read-write | current | This object is used to set ONT port flow control switch. Options: 1. on(1) - Indicates that the switch of ONT port flow control is on 2. off(2) - Indicates tha… |
| 1.3.6.1.4.1.2011.6.128.1.1.2.81.1.10 | ColumnhwEponDeviceOntEthernetRingStatus | read-only | current | This object indicates the ring status of ONT ETH port. Options: 1. forward(1) - Indicates that the ring status of ONT ETH port is forward 2. block(2) - Indicat… |
| 1.3.6.1.4.1.2011.6.128.1.1.2.81.1.31 | ColumnhwEponDeviceOntEthernetOnlineState | read-only | current | This object indicates the status of ONT ETH port. Options: 1. linkup(1) - Indicates that the status of ONT ETH port is link up 2. linkdown(2) - Indicates that … |
| 1.3.6.1.4.1.2011.6.128.1.1.2.81.1.32 | ColumnhwEponDeviceOntEthernetPortCfgUpStreamCarTrafficTableId | read-write | current | This object indicates the ONT port upstream car profile id (1~1024, 0xfffe-unconcern). |
| 1.3.6.1.4.1.2011.6.128.1.1.2.81.1.33 | ColumnhwEponDeviceOntEthernetPortCfgDownStreamCarTrafficTableId | read-write | current | This object indicates the ONT port downstream car profile id (1~1024, 0xfffe-unconcern). |
| 1.3.6.1.4.1.2011.6.128.1.1.2.81.1.34 | ColumnhwEponDeviceOntEthernetPortCfgUpStreamCarTrafficTableName | read-write | current | This object indicates the ONT port upstream car profile name. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.81.1.35 | ColumnhwEponDeviceOntEthernetPortCfgDownStreamCarTrafficTableName | read-write | current | This object indicates the ONT port downstream car profile name. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.82 | TablehwEponDeviceOntTDMPortCfgTable | not-accessible | current | The ONT TDM port config table. The index of this table is a combination of ifIndex, hwEponDeviceOntIndex and hwEponDeviceOntTDMPortId. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.82.1 | RowhwEponDeviceOntTDMPortCfgEntry | not-accessible | current | The ONT TDM port config table. The index of this entry is a combination of ifIndex, hwEponDeviceOntIndex and hwEponDeviceOntTDMPortId. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.82.1.1 | ColumnhwEponDeviceOntTDMPortId | not-accessible | current | This object indicates the ONT TDM port ID. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.82.1.2 | ColumnhwEponDeviceOntTDMPortOperateStatus | read-write | current | This object indicates the switch of the port. Options: 1. on(1) - Indicates that the switch of the port is on 2. off(2) - Indicates that the switch of the port… |
| 1.3.6.1.4.1.2011.6.128.1.1.2.83 | TablehwEponDeviceOntPOTSPortCfgTable | not-accessible | current | The ONT POTS port config table. The index of this table is a combination of ifIndex, hwEponDeviceOntIndex and hwEponDeviceOntPOTSPortId. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.83.1 | RowhwEponDeviceOntPOTSPortCfgEntry | not-accessible | current | The ONT POTS port config table. The index of this entry is a combination of ifIndex, hwEponDeviceOntIndex and hwEponDeviceOntPOTSPortId. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.83.1.1 | ColumnhwEponDeviceOntPOTSPortId | not-accessible | current | This object indicates the ONT POTS port ID. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.83.1.2 | ColumnhwEponDeviceOntPOTSPortOperateStatus | read-write | current | This object indicates the ONT POTS port switch. Options: 1. on(1) - Indicates that the switch of the ONT POTS port is on 2. off(2) - Indicates that the switch … |
| 1.3.6.1.4.1.2011.6.128.1.1.2.84 | TablehwGponDeviceOntTDMPortCfgTable | not-accessible | current | The ONT TDM port config table. The index of this table is a combination of ifIndex, hwGponDeviceOntIndex and hwGponDeviceOntTDMPortId. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.84.1 | RowhwGponDeviceOntTDMPortCfgEntry | not-accessible | current | The ONT TDM port config table. The index of this entry is a combination of ifIndex, hwGponDeviceOntIndex and hwGponDeviceOntTDMPortId. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.84.1.1 | ColumnhwGponDeviceOntTDMPortId | not-accessible | current | This object indicates the ONT TDM port ID. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.84.1.2 | ColumnhwGponDeviceOntTDMPortState | read-only | current | This object indicates the ONT TDM port state. Options: 1. normal (1) - Indicates that the ONT TDM port state is normal 2. los (2) - Indicates that the ONT TDM … |
| 1.3.6.1.4.1.2011.6.128.1.1.2.84.1.3 | ColumnhwGponDeviceOntTDMPortOperateStatus | read-write | current | ONT TDM port enable switch. Options: 1. enable(1) - Enable the ONT TDM port switch 2. disable(2) - Disable the ONT TDM port switch 3. invalid(-1) - Indicates t… |
| 1.3.6.1.4.1.2011.6.128.1.1.2.91 | TablehwEponDeviceCtcRemoteOntPortVlanConfigTable | not-accessible | current | The ont port's remote native vlan info table. The index of this table is a combination of ifIndex, hwEponDeviceOntIndex, hwEponDeviceOntPortType and hwEponDevi… |
| 1.3.6.1.4.1.2011.6.128.1.1.2.91.1 | RowhwEponDeviceCtcRemoteOntPortVlanConfigEntry | not-accessible | current | The ont port's remote native vlan info table. The index of this entry is a combination of ifIndex, hwEponDeviceOntIndex, hwEponDeviceOntPortType and hwEponDevi… |
| 1.3.6.1.4.1.2011.6.128.1.1.2.91.1.1 | ColumnhwEponDeviceOntPortType | not-accessible | current | This object indicates the ont port's type. The value 24 indicates the FE port. The value 34 indicates the GE port. The value 47 indicates the ETH port. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.91.1.2 | ColumnhwEponDeviceOntPortId | not-accessible | current | This object indicates the ont port ID. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.91.1.3 | ColumnhwEponDeviceCtcRemoteOntPortVlanMode | read-only | current | This object indicates the vlan mode of ont's port. Options: 1. transparent(0) - Indicates that the vlan mode of ont's port is transparent 2. tag(1) - Indicates… |
| 1.3.6.1.4.1.2011.6.128.1.1.2.91.1.4 | ColumnhwEponDeviceCtcRemoteOntPortDefaultTagTPID | read-only | current | This object indicates the ont port's native vlan TPID. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.91.1.5 | ColumnhwEponDeviceCtcRemoteOntPortDefaultTagCFI | read-only | current | This object indicates the ont port's native vlan CFI. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.91.1.6 | ColumnhwEponDeviceCtcRemoteOntPortDefaultTagPri | read-only | current | This object indicates the ont port's native vlan priority. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.91.1.7 | ColumnhwEponDeviceCtcRemoteOntPortDefaultTagVID | read-only | current | This object indicates the ont port's native VLAN ID. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.92 | TablehwEponDeviceCtcRemoteOntPortVlanTranslationInfoTable | not-accessible | current | This table is used to display the configuration information about VLAN switching pair of the ONT port. The index of this table is a combination of ifIndex, hwE… |
| 1.3.6.1.4.1.2011.6.128.1.1.2.92.1 | RowhwEponDeviceCtcRemoteOntPortVlanTranslationInfoEntry | not-accessible | current | This table is used to display the configuration information about VLAN switching pair of the ONT port. The index of this entry is a combination of ifIndex, hwE… |
| 1.3.6.1.4.1.2011.6.128.1.1.2.92.1.1 | ColumnhwEponDeviceOntPortVlanIndex | not-accessible | current | This object indicates the vlan index. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.92.1.2 | ColumnhwEponDeviceCtcOntPortCvlanTagTPID | read-only | current | This object indicates the ont port's vlan TPID. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.92.1.3 | ColumnhwEponDeviceCtcOntPortCvlanTagCFI | read-only | current | This object indicates the ont port's vlan CFI. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.92.1.4 | ColumnhwEponDeviceCtcOntPortCvlanTagPri | read-only | current | This object indicates the ont port's vlan priority. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.92.1.5 | ColumnhwEponDeviceCtcOntPortCvlanTagVID | read-only | current | This object indicates the ont port's VLAN ID. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.92.1.6 | ColumnhwEponDeviceCtcOntPortSvlanTagTPID | read-only | current | This object indicates the ont port's vlan TPID. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.92.1.7 | ColumnhwEponDeviceCtcOntPortSvlanTagCFI | read-only | current | This object indicates the ont port's vlan CFI. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.92.1.8 | ColumnhwEponDeviceCtcOntPortSvlanTagPri | read-only | current | This object indicates the ont port's vlan priority. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.92.1.9 | ColumnhwEponDeviceCtcOntPortSvlanTagVID | read-only | current | This object indicates the ont port's VLAN ID. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.93 | TablehwEponDeviceCtcRemoteOntMultiCtrItemTable | not-accessible | current | This table is used to display the ONT multicast control list. The index of this table is a combination of ifIndex, hwEponDeviceOntIndex and hwEponDeviceOntMult… |
| 1.3.6.1.4.1.2011.6.128.1.1.2.93.1 | RowhwEponDeviceCtcRemoteOntMultiCtrItemEntry | not-accessible | current | This table is used to display the ONT multicast control list. The index of this entry is a combination of ifIndex, hwEponDeviceOntIndex and hwEponDeviceOntMult… |
| 1.3.6.1.4.1.2011.6.128.1.1.2.93.1.1 | ColumnhwEponDeviceOntMultiCtrItemIndex | not-accessible | current | This object indicates the item's index. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.93.1.2 | ColumnhwEponDeviceCtcOntMultiCtrlType | read-only | current | This object indicates the multicast contrl type. Options: 1. gda(0) - Based GDA MAC only 2. gdaVLAN(1) - Based GDA MAC plus muliticast VLAN ID 3. gdaSA(2) - Ba… |
| 1.3.6.1.4.1.2011.6.128.1.1.2.93.1.3 | ColumnhwEponDeviceCtcOntMultiCtrlUsrID | read-only | current | This object indicates the user ID of multicast. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.93.1.4 | ColumnhwEponDeviceCtcOntMultiCtrlGDA | read-only | current | This object indicates the GDA of multicast control. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.93.1.5 | ColumnhwEponDeviceCtcOntMultiCtrlVlanIDorSA | read-only | current | This object indicates the SA of multicast control. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.100 | TablehwGponDeviceOntSnmpStaticRouteConfigTable | not-accessible | current | This is the ONT SNMP static route configuration table. This table is used to configure and query the SNMP route configuration of an ONT. The index of this tabl… |
| 1.3.6.1.4.1.2011.6.128.1.1.2.100.1 | RowhwGponDeviceOntSnmpStaticRouteConfigEntry | not-accessible | current | This is the ONT SNMP static route configuration table. This table is used to configure and query the SNMP route configuration of an ONT. The index of this entr… |
| 1.3.6.1.4.1.2011.6.128.1.1.2.100.1.1 | ColumnhwGponOntObjectSnmpStaticRouteIndex | not-accessible | current | This object indicates the ONT SNMP static route table index. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.100.1.2 | ColumnhwGponOntObjectSnmpStaticRouteIpAddress | read-write | current | This object indicates the IP address. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.100.1.3 | ColumnhwGponOntObjectSnmpStaticRouteNetMask | read-write | current | This object indicates the subnet mask of the IP address. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.100.1.4 | ColumnhwGponOntObjectSnmpStaticRouteNextHop | read-write | current | This object indicates the next hop IP address. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.100.1.5 | ColumnhwGponOntObjectSnmpStaticRouteRowStatus | read-create | current | The hwGponOntObjectSnmpStaticRouteRowStatus is used to create a new row or to modify or delete an existing row in this table. Options: 1. createAndGo(4) -creat… |
| 1.3.6.1.4.1.2011.6.128.1.1.2.101 | TablehwGponDeviceOntRegisterExInfoTable | not-accessible | current | This table is used to save the ont's register info, less than 10 times. The index of this table is a combination of ifIndex, hwGponDeviceOntIndex and hwGponDev… |
| 1.3.6.1.4.1.2011.6.128.1.1.2.101.1 | RowhwGponDeviceOntRegisterExInfoEntry | not-accessible | current | This table is used to save the ont's register info, less than 10 times. The index of this entry is a combination of ifIndex, hwGponDeviceOntIndex and hwGponDev… |
| 1.3.6.1.4.1.2011.6.128.1.1.2.101.1.1 | ColumnhwGponDeviceOntRegisterInfoIndex | read-only | current | This object indicates the ONT register information index. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.101.1.2 | ColumnhwGponDeviceOntRegisterInfoAuthMethod | read-only | current | This object indicates the authentication mode for the ONT. The value (1) indicates that the mode is SN or MAC. The value (2) indicates that the mode is the com… |
| 1.3.6.1.4.1.2011.6.128.1.1.2.101.1.3 | ColumnhwGponDeviceOntRegisterInfoSN | read-only | current | This object indicates the ONT serial number. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.101.1.4 | ColumnhwGponDeviceOntRegisterInfoPassword | read-only | current | This object indicates the ONT password GPON password size (0..10) XG-PON password size (0..36) |
| 1.3.6.1.4.1.2011.6.128.1.1.2.101.1.5 | ColumnhwGponDeviceOntRegisterInfoType | read-only | current | This object indicates the ONT type |
| 1.3.6.1.4.1.2011.6.128.1.1.2.101.1.6 | ColumnhwGponDeviceOntRegisterInfoUpTime | read-only | current | This object indicates the time when the ONT went online. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.101.1.7 | ColumnhwGponDeviceOntRegisterInfoDownTime | read-only | current | This object indicates the time when the ONT went offline. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.101.1.8 | ColumnhwGponDeviceOntRegisterInfoDownCause | read-only | current | This object indicates the reason why the ONT went offline. Options: 1. ontdeleted(0) - The cause of ONT's down is that the ont is deleted 2. linkeddown(1) - Th… |
| 1.3.6.1.4.1.2011.6.128.1.1.2.101.1.9 | ColumnhwGponDeviceOntRegisterInfoLoid | read-only | current | This object indicates the ONT LOID. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.101.1.10 | ColumnhwGponDeviceOntRegisterInfoCheckcode | read-only | current | This object indicates the ONT CHECKCODE. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.102 | TablehwEponDeviceOntSnmpStaticRouteTable | not-accessible | current | This is the ONT SNMP static route configuration table. This table is used to configure and query the SNMP route configuration of an ONT. The index of this tabl… |
| 1.3.6.1.4.1.2011.6.128.1.1.2.102.1 | RowhwEponDeviceOntSnmpStaticRouteEntry | not-accessible | current | This is the ONT SNMP static route configuration table. This table is used to configure and query the SNMP route configuration of an ONT. The index of this entr… |
| 1.3.6.1.4.1.2011.6.128.1.1.2.102.1.1 | ColumnhwEponOntSnmpStaticRouteIndex | not-accessible | current | This object indicates the ONT SNMP static route table index. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.102.1.2 | ColumnhwEponOntSnmpStaticRouteIpAddress | read-write | current | This object indicates the IP address. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.102.1.3 | ColumnhwEponOntSnmpStaticRouteNetMask | read-write | current | This object indicates the subnet mask of the IP address. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.102.1.4 | ColumnhwEponOntSnmpStaticRouteNextHop | read-write | current | This object indicates the next hop IP address. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.102.1.5 | ColumnhwEponOntSnmpStaticRouteRowStatus | read-create | current | The hwEponOntSnmpStaticRouteRowStatus is used to create a new row or to modify or delete an existing row in this table. Options: 1. createAndGo(4) -create a ne… |
| 1.3.6.1.4.1.2011.6.128.1.1.2.103 | TablehwEponDeviceOntRegisterExInfoTable | not-accessible | current | This table is used to save the ONT's register info, less than 10 times. The index of this table is a combination of ifIndex, hwXponDeviceOntIndex and hwEponDev… |
| 1.3.6.1.4.1.2011.6.128.1.1.2.103.1 | RowhwEponDeviceOntRegisterExInfoEntry | not-accessible | current | This table is used to save the ONT's register info, less than 10 times. The index of this entry is a combination of ifIndex, hwXponDeviceOntIndex and hwEponDev… |
| 1.3.6.1.4.1.2011.6.128.1.1.2.103.1.1 | ColumnhwEponDeviceOntRegisterInfoIndex | read-only | current | This object indicates the ONT register information index. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.103.1.2 | ColumnhwEponDeviceOntRegisterInfoAuthMethod | read-only | current | This object indicates the authentication mode for the ONT. Options: 1. mac(1) - The authentication mode is MAC 2. macpassword(2) - The authentication mode is M… |
| 1.3.6.1.4.1.2011.6.128.1.1.2.103.1.3 | ColumnhwEponDeviceOntRegisterInfoMac | read-only | current | This object indicates the ONT MAC address. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.103.1.4 | ColumnhwEponDeviceOntRegisterInfoPassword | read-only | current | This object indicates the ONT password. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.103.1.5 | ColumnhwEponDeviceOntRegisterInfoType | read-only | current | This object indicates the ONT type. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.103.1.6 | ColumnhwEponDeviceOntRegisterInfoUpTime | read-only | current | This object indicates the time when the ONT goes online. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.103.1.7 | ColumnhwEponDeviceOntRegisterInfoDownTime | read-only | current | This object indicates the time when the ONT goes offline. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.103.1.8 | ColumnhwEponDeviceOntRegisterInfoDownCause | read-only | current | This object indicates the reason why the ONT goes offline. Options: 1. ontdeleted(0) - The cause of ONT's down is that the ont is deleted 2. linkeddown(1) - Th… |
| 1.3.6.1.4.1.2011.6.128.1.1.2.103.1.9 | ColumnhwEponDeviceOntRegisterInfoLoid | read-only | current | This object indicates the ONT LOID. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.103.1.10 | ColumnhwEponDeviceOntRegisterInfoCheckcode | read-only | current | This object indicates the ONT CHECKCODE |
| 1.3.6.1.4.1.2011.6.128.1.1.2.104 | TablehwEponDeviceOntOpticsDdmInfoTable | not-accessible | current | This table is used to query the information about the optical transceiver of the ONT. The index of this table is a combination of ifIndex and hwXponDeviceOntIn… |
| 1.3.6.1.4.1.2011.6.128.1.1.2.104.1 | RowhwEponDeviceOntOpticsDdmInfoEntry | not-accessible | current | This table is used to query the information about the optical transceiver of the ONT. The index of this entry is a combination of ifIndex and hwXponDeviceOntIn… |
| 1.3.6.1.4.1.2011.6.128.1.1.2.104.1.1 | ColumnhwEponOntOpticalDdmOltRxOntPower | read-only | current | The ONT optical power received on the OLT, unit dBm. The relationship between the actual value and the value get from this leaf node is as follows, Actual valu… |
| 1.3.6.1.4.1.2011.6.128.1.1.2.104.1.2 | ColumnhwEponOntOpticalDdmTemperature | read-only | current | This object indicates the temperature of the optical module. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.104.1.3 | ColumnhwEponOntOpticalDdmBiasCurrent | read-only | current | This object indicates the Bias Current of the optical module. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.104.1.4 | ColumnhwEponOntOpticalDdmTxPower | read-only | current | This object indicates the transmitting power of the optical module. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.104.1.5 | ColumnhwEponOntOpticalDdmRxPower | read-only | current | This object indicates the receiving power of the optical module. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.104.1.6 | ColumnhwEponOntOpticalDdmVoltage | read-only | current | This object indicates the Power feed voltage of the optical module. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.104.1.7 | ColumnhwEponOntOpticalDdmOltTxPower | read-only | current | This object indicates the transmitting power of the ont peer optical module. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.120 | TablehwXponDeviceOltDualparentTable | not-accessible | current | This table is the type B dual-homing configuration table. The index of this table is ifIndex. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.120.1 | RowhwXponDeviceOltDualparentEntry | not-accessible | current | This table is the type B dual-homing configuration table. The index of this entry is ifIndex. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.120.1.1 | ColumnhwXponDeviceOltDualparentJoin | read-write | current | This object indicates whether to add a port to the protection group. Options: 1.joinwork(1) - Add the port as a working port to the protection group 2.joinprot… |
| 1.3.6.1.4.1.2011.6.128.1.1.2.120.1.2 | ColumnhwXponDeviceOltDualparentFreeze | read-write | current | This object indicates whether the protection group is in the frozen state. Options: 1. freeze(1) - Freeze the protection group 2. undofreeze(2) - Undo the froz… |
| 1.3.6.1.4.1.2011.6.128.1.1.2.120.1.3 | ColumnhwXponDeviceOltDualparentForceSwitch | read-write | current | This object indicates whether the port is in the forced working mode. Options: 1. force(1) - The port is in the forced working mode 2. undoforce(2) - The port … |
| 1.3.6.1.4.1.2011.6.128.1.1.2.120.1.4 | ColumnhwXponDeviceOltDualparentWorkState | read-write | current | This object is used to set or show the port protect status. Options: 1. active(1) - The port protect status is active 2. standby(2) - The port protect status i… |
| 1.3.6.1.4.1.2011.6.128.1.1.2.120.1.5 | ColumnhwXponDeviceOltDualparentDetectTimeLen | read-only | current | This object indicates the duration of the protection group member in the detect state. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.120.1.6 | ColumnhwXponDeviceOltDualparentDesc | read-write | current | This object indicates the description of the member port of the protection group. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.130 | TablehwXponDynamicMacQueryTable | not-accessible | current | This table is used to query dynamic MAC address. The index of this table is a combination of ifIndex, hwXponDynamicMacVlanId, hwXponDynamicMacIndex, hwXponDyna… |
| 1.3.6.1.4.1.2011.6.128.1.1.2.130.1 | RowhwXponDynamicMacQueryEntry | not-accessible | current | This table is used to query dynamic MAC address. The index of this entry is a combination of ifIndex, hwXponDynamicMacVlanId, hwXponDynamicMacIndex, hwXponDyna… |
| 1.3.6.1.4.1.2011.6.128.1.1.2.130.1.1 | ColumnhwXponDynamicMacVlanId | not-accessible | current | This object indicates the VLAN of dynamic MAC address. The value(-1) is invalid value. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.130.1.2 | ColumnhwXponDynamicMacIndex | not-accessible | current | This object indicates the dynamic MAC address index. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.130.1.3 | ColumnhwXponDynamicMacQueryType | not-accessible | current | This object indicates the query type. Options: 1. xponOntPortInSpecVlan(1) - The ONT port is in the specified vlan 2. xponOntInSpecPort(2) - The specified ONT … |
| 1.3.6.1.4.1.2011.6.128.1.1.2.130.1.4 | ColumnhwXponDynamicMacQueryPara0 | not-accessible | current | This object indicates the ONT ID, range: 0~254. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.130.1.5 | ColumnhwXponDynamicMacQueryPara1 | not-accessible | current | This object indicates the type of the ONT port. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.130.1.6 | ColumnhwXponDynamicMacQueryPara2 | not-accessible | current | This object indicates the port ID of the ONT. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.130.1.7 | ColumnhwXponDynamicMacQueryPara3 | not-accessible | current | This object indicates the Fourth reserved Parameter of HwXponDynamicMacQueryEntry. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.130.1.8 | ColumnhwXponDynamicMacAddr | read-only | current | MAC address. When hwXponDynamicMacQueryType is 1 ,the MAC addresses which can include 5 MAC addresses at most, and its format is (XX.XX.XX.XX.XX.XX). When hwXp… |
| 1.3.6.1.4.1.2011.6.128.1.1.2.140 | TablehwGponDeviceUnboundGemPortQueryTable | not-accessible | current | This is the unbound GEM port query table in the profile mode. The index of this table is a combination of ifIndex and hwGponDeviceUnboundGemPortId. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.140.1 | RowhwGponDeviceUnboundGemPortQueryEntry | not-accessible | current | This is the unbound GEM port query table in the profile mode. The index of this entry is a combination of ifIndex and hwGponDeviceUnboundGemPortId. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.140.1.1 | ColumnhwGponDeviceUnboundGemPortId | not-accessible | current | This object indicates the unbound GEM port ID. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.140.1.2 | ColumnhwGponDeviceUnboundGemPortServiceType | read-only | current | This object indicates the carried service type of the unbound GEM port. Options: 1. tdm(1) - TDM 2. omci(2) - OMCI 3. eth(3) - ETH 4. invalid(-1) - Indicates t… |
| 1.3.6.1.4.1.2011.6.128.1.1.2.140.1.3 | ColumnhwGponDeviceUnboundGemPortEncrypt | read-only | current | This object indicates the downstream encryption switch of the unbound GEM port. Options: 1. on(1) - Indicates that the downstream encryption switch of the unbo… |
| 1.3.6.1.4.1.2011.6.128.1.1.2.140.1.4 | ColumnhwGponDeviceUnboundGemPortCascade | read-only | current | This object indicates the subtending attribute of the unbound GEM port. Options: 1. on(1) - Indicates that the subtending attribute of the unbound GEM port is … |
| 1.3.6.1.4.1.2011.6.128.1.1.2.140.1.5 | ColumnhwGponDeviceUnboundGemPortDescription | read-only | current | This object indicates the unbound GEM port description. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.140.1.6 | ColumnhwGponDeviceUnboundGemPortEntryStatus | read-create | current | The hwGponDeviceUnboundGemPortEntryStatus is used to create a new row or to modify or delete an existing row in this table. Options: 1. createAndGo(4) -create … |
| 1.3.6.1.4.1.2011.6.128.1.1.2.141 | TablehwGponDeviceOntGemPortBindTable | not-accessible | current | This is ONT GEM port configuration table. This table is used to configure the mapping relation between the T-CONT and GEM port of an ONT. The index of this tab… |
| 1.3.6.1.4.1.2011.6.128.1.1.2.141.1 | RowhwGponDeviceOntGemPortBindEntry | not-accessible | current | This is ONT GEM port configuration table. This table is used to configure the mapping relation between the T-CONT and GEM port of an ONT. The index of this ent… |
| 1.3.6.1.4.1.2011.6.128.1.1.2.141.1.1 | ColumnhwGponDeviceOntGemPortBindGemPortId | not-accessible | current | This object indicates the ONT GEM Port ID. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.141.1.2 | ColumnhwGponDeviceOntGemPortBindOntId | read-write | current | This object indicates the ONT ID. If the value of the ACCESS clause is 'write-only', then the value of the MAX-ACCESS clause MUST be 'read-write', and the DESC… |
| 1.3.6.1.4.1.2011.6.128.1.1.2.141.1.3 | ColumnhwGponDeviceOntGemPortBindTcontId | read-write | current | This object indicates the T-CONT ID. If the value of the ACCESS clause is 'write-only', then the value of the MAX-ACCESS clause MUST be 'read-write', and the D… |
| 1.3.6.1.4.1.2011.6.128.1.1.2.141.1.4 | ColumnhwGponDeviceOntGemPortBindUpPQIndex | read-write | current | This object indicates the up stream priority-queue index. If the value of the ACCESS clause is 'write-only', then the value of the MAX-ACCESS clause MUST be 'r… |
| 1.3.6.1.4.1.2011.6.128.1.1.2.141.1.5 | ColumnhwGponDeviceOntGemPortBindTrafficTableId | read-write | current | This object indicates the traffic table id of the GEM port. If the value of the ACCESS clause is 'write-only', then the value of the MAX-ACCESS clause MUST be … |
| 1.3.6.1.4.1.2011.6.128.1.1.2.141.1.6 | ColumnhwGponDeviceOntGemPortBindEntryStatus | read-create | current | The hwGponDeviceOntGemPortBindEntryStatus is used to create a new row or to modify or delete an existing row in this table. Options: 1. createAndGo(4) -create … |
| 1.3.6.1.4.1.2011.6.128.1.1.2.141.1.7 | ColumnhwGponDeviceOntGemPortBindDownPQIndex | read-write | current | This object indicates the down stream priority-queue index. 0..7: Down Stream PQ index. 254 : Apaptive, Gemport Down Stream PQ is decided by ont. -1 : Default … |
| 1.3.6.1.4.1.2011.6.128.1.1.2.141.1.8 | ColumnhwGponDeviceOntGemPortBindTrafficTableName | read-write | current | This object indicates the traffic table name of the GEM port. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.142 | TablehwGponDeviceLineProfTcontRefTable | not-accessible | current | This is TCONTS configuration table in gpon mode. This table is used to configure these TCONTS which are not binded dba-profile. The index of this table is a co… |
| 1.3.6.1.4.1.2011.6.128.1.1.2.142.1 | RowhwGponDeviceLineProfTcontRefEntry | not-accessible | current | This is TCONTS configuration table in gpon mode. This table is used to configure these TCONTS which are not binded dba-profile. The index of this entry is a co… |
| 1.3.6.1.4.1.2011.6.128.1.1.2.142.1.1 | ColumnhwGponDeviceLineProfTcontRefIndex | not-accessible | current | This object indicates the TCONT Index. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.142.1.2 | ColumnhwGponDeviceLineProfTcontName | read-write | current | This object indicates the dba-profile name. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.142.1.3 | ColumnhwGponDeviceLineProfAllocId | read-only | current | This object indicates the alloc ID. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.142.1.4 | ColumnhwGponDeviceLineProfTcontRefEntryStatus | read-create | current | The hwGponDeviceLineProfTcontRefEntryStatus is used to create a new row or to modify or delete an existing row in this table. Options: 1. createAndGo(4) -creat… |
| 1.3.6.1.4.1.2011.6.128.1.1.2.143 | TablehwXponDeviceRogueOntTable | not-accessible | current | This is the rogue ONT list table. The index of this table is ifIndex. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.143.1 | RowhwXponDeviceRogueOntEntry | not-accessible | current | This is the rogue ONT list table. The index of this entry is ifIndex. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.143.1.1 | ColumnhwXponDeviceRogueOnt | read-only | current | This object indicates the rogue ont list. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.144 | TablehwEponDeviceOntLlidTable | not-accessible | current | This is the ONT LLID related configuration table. The index of this table is a combination of ifIndex, hwEponDeviceOntIndex and hwEponDeviceOntLlidIndex. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.144.1 | RowhwEponDeviceOntLlidEntry | not-accessible | current | This is the ONT LLID related configuration table. The index of this entry is a combination of ifIndex, hwEponDeviceOntIndex and hwEponDeviceOntLlidIndex. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.144.1.1 | ColumnhwEponDeviceOntLlidIndex | not-accessible | current | This object indicates the EPON line profile LLID config Llid index. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.144.1.2 | ColumnhwEponDeviceOntLlidValue | read-only | current | This object indicates the value of Logical Link Identifier. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.144.1.3 | ColumnhwEponDeviceOntLlidDbaProfileName | read-write | current | This object indicates the name of the DBA profile. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.144.1.4 | ColumnhwEponDeviceOntLlidCarTrafficTableId | read-write | current | This object indicates the ONT Llid car profile id (1~1024, 0xfffe-unconcern). |
| 1.3.6.1.4.1.2011.6.128.1.1.2.144.1.5 | ColumnhwEponDeviceOntLlidCarTrafficTableName | read-write | current | This object indicates the ONT Llid car profile name. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.145 | TablehwEponDeviceOntPortVlanTable | not-accessible | current | This is the ONT port vlan configuration table. The index of this table is a combination of ifIndex, hwEponOntPortVlanCfgOntPhyType, hwEponDeviceOntIndex, hwEpo… |
| 1.3.6.1.4.1.2011.6.128.1.1.2.145.1 | RowhwEponDeviceOntPortVlanEntry | not-accessible | current | This is the ONT port vlan configuration table. The index of this entry is a combination of ifIndex, hwEponOntPortVlanCfgOntPhyType, hwEponDeviceOntIndex, hwEpo… |
| 1.3.6.1.4.1.2011.6.128.1.1.2.145.1.1 | ColumnhwEponOntPortVlanCfgOntPhyType | not-accessible | current | This object indicates the port type of the ONT. Options: 1. t1(13) - T1 2. e1(14) - E1 3. fe(24) - FE 4. ge(34) - GE 5. moca(46) - MOCA 6. eth(47) - ETH 7. iph… |
| 1.3.6.1.4.1.2011.6.128.1.1.2.145.1.2 | ColumnhwEponOntPortVlanCfgOntPhyIndex | not-accessible | current | This object indicates the port index of the ONT. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.145.1.3 | ColumnhwEponOntPortVlanCfgCVlan | not-accessible | current | This object indicates the epon ont port customer vlan. When the vlan mode is transparent, should input 65534 (0xfffe). |
| 1.3.6.1.4.1.2011.6.128.1.1.2.145.1.4 | ColumnhwEponOntPortVlanCfgSVlan | read-write | current | This object indicates the epon ont port service vlan. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.145.1.5 | ColumnhwEponOntPortVlanCfgType | read-write | current | This object indicates the xpon service profile port vlan type. Options: 1. transparent(1) - Indicates that the XPON service profile port vlan type is transpare… |
| 1.3.6.1.4.1.2011.6.128.1.1.2.145.1.6 | ColumnhwEponOntPortVlanCfgRowstatus | read-create | current | Row status. This object is used to differentiate the creation, modification and deletion operations for an object. Options: 1. createAndGo(4) -create a new ins… |
| 1.3.6.1.4.1.2011.6.128.1.1.2.146 | TablehwEponDeviceAlarmProfileInfoTable | not-accessible | current | This table is used to create, delete, modify or query the EPON alarm profile. The index of this table is hwEponDeviceAlarmProfileInfoNameIndex. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.146.1 | RowhwEponDeviceAlarmProfileInfoEntry | not-accessible | current | This table is used to create, delete, modify or query the EPON alarm profile. The index of this entry is hwEponDeviceAlarmProfileInfoNameIndex. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.146.1.1 | ColumnhwEponDeviceAlarmProfileInfoNameIndex | not-accessible | current | This object indicates the name of EPON alarm profile. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.146.1.2 | ColumnhwEponDeviceAlarmProfileBindNum | read-only | current | This object indicates the bind number of EPON alarm profile. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.146.1.3 | ColumnhwEponDeviceAlarmProfileTxDropEventsThreshold | read-write | current | This object indicates the down stream drop events threshold of EPON alarm profile. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.146.1.4 | ColumnhwEponDeviceAlarmProfileTxDropEventsRestoreThreshold | read-write | current | This object indicates the down stream drop events restore threshold of EPON alarm profile. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.146.1.5 | ColumnhwEponDeviceAlarmProfileRxDropEventsThreshold | read-write | current | This object indicates the up stream drop events threshold of EPON alarm profile. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.146.1.6 | ColumnhwEponDeviceAlarmProfileRxDropEventsRestoreThreshold | read-write | current | This object indicates the up stream drop events restore threshold of EPON alarm profile. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.146.1.7 | ColumnhwEponDeviceAlarmProfileTxCRCErrorFramesThreshold | read-write | current | This object indicates the down stream CRC error frames threshold of EPON alarm profile. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.146.1.8 | ColumnhwEponDeviceAlarmProfileTxCRCErrorFramesRestoreThreshold | read-write | current | This object indicates the down stream CRC error frames restore threshold of EPON alarm profile. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.146.1.9 | ColumnhwEponDeviceAlarmProfileRxCRCErrorFramesThreshold | read-write | current | This object indicates the up stream CRC error frames threshold of EPON alarm profile. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.146.1.10 | ColumnhwEponDeviceAlarmProfileRxCRCErrorFramesRestoreThreshold | read-write | current | This object indicates the up stream CRC error frames restore threshold of EPON alarm profile. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.146.1.11 | ColumnhwEponDeviceAlarmProfileTxUndersizeFramesThreshold | read-write | current | This object indicates the down stream under size frames threshold of EPON alarm profile. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.146.1.12 | ColumnhwEponDeviceAlarmProfileTxUndersizeFramesRestoreThreshold | read-write | current | This object indicates the down stream under size frames restore threshold of EPON alarm profile. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.146.1.13 | ColumnhwEponDeviceAlarmProfileRxUndersizeFramesThreshold | read-write | current | This object indicates the up stream under size frames threshold of EPON alarm profile. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.146.1.14 | ColumnhwEponDeviceAlarmProfileRxUndersizeFramesRestoreThreshold | read-write | current | This object indicates the up stream under size frames restore threshold of EPON alarm profile. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.146.1.15 | ColumnhwEponDeviceAlarmProfileTxOversizeFramesThreshold | read-write | current | This object indicates the down stream over size frames threshold of EPON alarm profile. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.146.1.16 | ColumnhwEponDeviceAlarmProfileTxOversizeFramesRestoreThreshold | read-write | current | This object indicates the down stream over size frames restore threshold of EPON alarm profile. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.146.1.17 | ColumnhwEponDeviceAlarmProfileRxOversizeFramesThreshold | read-write | current | This object indicates the up stream over size frames threshold of EPON alarm profile. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.146.1.18 | ColumnhwEponDeviceAlarmProfileRxOversizeFramesRestoreThreshold | read-write | current | This object indicates the up stream over size frames restore threshold of EPON alarm profile. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.146.1.19 | ColumnhwEponDeviceAlarmProfileTxFragmentsThreshold | read-write | current | This object indicates the down stream fragments threshold of EPON alarm profile. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.146.1.20 | ColumnhwEponDeviceAlarmProfileTxFragmentsRestoreThreshold | read-write | current | This object indicates the down stream fragments restore threshold of EPON alarm profile. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.146.1.21 | ColumnhwEponDeviceAlarmProfileRxFragmentsThreshold | read-write | current | This object indicates the up stream fragments threshold of EPON alarm profile. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.146.1.22 | ColumnhwEponDeviceAlarmProfileRxFragmentsRestoreThreshold | read-write | current | This object indicates the up stream fragments restore threshold of EPON alarm profile. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.146.1.23 | ColumnhwEponDeviceAlarmProfileTxJabbersThreshold | read-write | current | This object indicates the down stream jabbers threshold of EPON alarm profile. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.146.1.24 | ColumnhwEponDeviceAlarmProfileTxJabbersRestoreThreshold | read-write | current | This object indicates the down stream jabbers restore threshold of EPON alarm profile. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.146.1.25 | ColumnhwEponDeviceAlarmProfileRxJabbersThreshold | read-write | current | This object indicates the up stream jabbers threshold of EPON alarm profile. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.146.1.26 | ColumnhwEponDeviceAlarmProfileRxJabbersRestoreThreshold | read-write | current | This object indicates the up stream jabbers restore threshold of EPON alarm profile. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.146.1.27 | ColumnhwEponDeviceAlarmProfileTxDiscardsThreshold | read-write | current | This object indicates the down stream discards threshold of EPON alarm profile. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.146.1.28 | ColumnhwEponDeviceAlarmProfileTxDiscardsRestoreThreshold | read-write | current | This object indicates the down stream discards restore threshold of EPON alarm profile. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.146.1.29 | ColumnhwEponDeviceAlarmProfileRxDiscardsThreshold | read-write | current | This object indicates the up stream discards threshold of EPON alarm profile. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.146.1.30 | ColumnhwEponDeviceAlarmProfileRxDiscardsRestoreThreshold | read-write | current | This object indicates the up stream discards restore threshold of EPON alarm profile. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.146.1.31 | ColumnhwEponDeviceAlarmProfileTxErrorsThreshold | read-write | current | This object indicates the down stream errors threshold of EPON alarm profile. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.146.1.32 | ColumnhwEponDeviceAlarmProfileTxErrorsRestoreThreshold | read-write | current | This object indicates the down stream errors restore threshold of EPON alarm profile. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.146.1.33 | ColumnhwEponDeviceAlarmProfileRxErrorsThreshold | read-write | current | This object indicates the up stream errors threshold of EPON alarm profile. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.146.1.34 | ColumnhwEponDeviceAlarmProfileRxErrorsRestoreThreshold | read-write | current | This object indicates the up stream errors restore threshold of EPON alarm profile. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.146.1.35 | ColumnhwEponDeviceAlarmProfileRowStatus | read-create | current | This object is used to create a new row or to modify or delete an existing row in this table. Options: 1. createAndGo(4) -create a new instance of a conceptual… |
| 1.3.6.1.4.1.2011.6.128.1.1.2.147 | TablehwGponDeviceOntPortVlanTable | not-accessible | current | This table is used to create, delete, modify or query GPON ONT's distributed port vlan. The index of this table is ifIndex, hwGponDeviceOntIndex, hwGponDeviceO… |
| 1.3.6.1.4.1.2011.6.128.1.1.2.147.1 | RowhwGponDeviceOntPortVlanEntry | not-accessible | current | This table is used to create, delete, modify or query GPON ONT's distributed port vlan. The index of this entry is ifIndex, hwGponDeviceOntIndex, hwGponDeviceO… |
| 1.3.6.1.4.1.2011.6.128.1.1.2.147.1.1 | ColumnhwGponDeviceOntPortVlanPhyType | not-accessible | current | This object indicates the port type of the ONT. Options: 1. t1(13) - T1 2. e1(14) - E1 3. fe(24) - FE 4. ge(34) - GE 5. vdsl(37) - VDSL 6. wifi(40) - WiFi 7. m… |
| 1.3.6.1.4.1.2011.6.128.1.1.2.147.1.2 | ColumnhwGponDeviceOntPortVlanPhyIndex | not-accessible | current | This object indicates the port index of the ONT. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.147.1.3 | ColumnhwGponDeviceOntPortVlanCVlan | not-accessible | current | This object indicates the port customer vlan distributed configured on GPON ONT. When the vlan mode is transparent, the custom vlan should be 65534 (0xfffe). W… |
| 1.3.6.1.4.1.2011.6.128.1.1.2.147.1.4 | ColumnhwGponDeviceOntPortVlanCPri | not-accessible | current | This object indicates the port translation or qinq c-priority distributed configured on GPON ONT. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.147.1.5 | ColumnhwGponDeviceOntPortVlanEtherType | not-accessible | current | This object indicates customer service encapsulation type distributed configured on GPON ONT. Options: 1. ipv4-ipoe(1) - Indicates that the customer service en… |
| 1.3.6.1.4.1.2011.6.128.1.1.2.147.1.6 | ColumnhwGponDeviceOntPortVlanCfgType | read-write | current | This object indicates the port vlan type distributed configured on GPON ONT. Options: 1. transparent(1) - Indicates that the port vlan type distributed configu… |
| 1.3.6.1.4.1.2011.6.128.1.1.2.147.1.7 | ColumnhwGponDeviceOntPortVlanSVlan | read-write | current | This object indicates the port service vlan distributed configured on GPON ONT. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.147.1.8 | ColumnhwGponDeviceOntPortVlanSPri | read-write | current | This object indicates the port translation or qinq s-priority distributed configured on GPON ONT. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.147.1.9 | ColumnhwGponDeviceOntPortVlanSPriPolicy | read-write | current | This object indicates the s-vlan priority policy distributed configured on GPON ONT. Options: 1. specify(1) - Indicates that the s-vlan priority policy is spec… |
| 1.3.6.1.4.1.2011.6.128.1.1.2.147.1.10 | ColumnhwGponDeviceOntPortVlanDscpDefaultPri | read-write | current | This object indicates the default priority for dscpMapping policy. |
| 1.3.6.1.4.1.2011.6.128.1.1.2.147.1.11 | ColumnhwGponDeviceOntPortVlanRowStatus | read-create | current | The hwGponDeviceOntPortVlanRowStatus is used to create a new row or to modify or delete an existing row in this table. Options: 1. createAndGo(4) -create a new… |
| 1.3.6.1.4.1.2011.6.128.1.1.3 | NodehwXponDeviceProfileObjects | |||
| 1.3.6.1.4.1.2011.6.128.1.1.3.21 | TablehwXponDeviceDbaProfileInfoTable | not-accessible | current | This is the DBA profile table. This table is used to create a DBA profile, and is used to modify or delete a DBA profile which is not bound. The index of this … |
| 1.3.6.1.4.1.2011.6.128.1.1.3.21.1 | RowhwXponDeviceDbaProfileInfoEntry | not-accessible | current | This is the DBA profile table. This table is used to create a DBA profile, and is used to modify or delete a DBA profile which is not bound. The index of this … |
| 1.3.6.1.4.1.2011.6.128.1.1.3.21.1.1 | ColumnhwXponDeviceDbaProfileInfoNameIndex | not-accessible | current | This object indicates the DBA profile name. |
| 1.3.6.1.4.1.2011.6.128.1.1.3.21.1.2 | ColumnhwXponDeviceDbaProfileType | read-write | current | This object indicates the DBA profile type. The value (1) indicates that the DBA profile type is Type 1. The value (2) indicates that the DBA profile type is T… |
| 1.3.6.1.4.1.2011.6.128.1.1.3.21.1.3 | ColumnhwXponDeviceDbaProfileFixedRate | read-write | current | This object indicates the fixed bandwidth of the profile, unit Kbps. The value (0) is invalid value. |
| 1.3.6.1.4.1.2011.6.128.1.1.3.21.1.4 | ColumnhwXponDeviceDbaProfileAssuredRate | read-write | current | This object indicates the assured bandwidth of the profile, unit Kbps. The value (0) is invalid value. |
| 1.3.6.1.4.1.2011.6.128.1.1.3.21.1.5 | ColumnhwXponDeviceDbaProfileMaxRate | read-write | current | This object indicates the max bandwidth of the profile, unit Kbps. The value (0) is invalid value. |
| 1.3.6.1.4.1.2011.6.128.1.1.3.21.1.6 | ColumnhwXponDeviceDbaProfileReferenceNum | read-only | current | This object indicates the binding times of the profile. |
| 1.3.6.1.4.1.2011.6.128.1.1.3.21.1.7 | ColumnhwXponDeviceDbaProfileBandwithCompensate | read-write | current | This object indicates the bandwidth compensation policy of the profile. Options: 1. enable(1) - Enable the bandwidth compensation policy of the profile 2. disa… |
| 1.3.6.1.4.1.2011.6.128.1.1.3.21.1.8 | ColumnhwXponDeviceDbaProfileEntryStatus | read-create | current | The hwXponDeviceDbaProfileEntryStatus is used to create a new row or to modify or delete an existing row in this table. Options: 1. createAndGo(4) -create a ne… |
| 1.3.6.1.4.1.2011.6.128.1.1.3.21.1.9 | ColumnhwXponDeviceDbaProfileFixDelay | read-write | current | Fix delay switch of the profile. Options: 1. enable(1) -Fix delay switch of the profile is enable 2. disable(2) -Fix delay switch of the profile is disable |
| 1.3.6.1.4.1.2011.6.128.1.1.3.21.1.10 | ColumnhwXponDeviceDbaProfileAdditionalBW | read-write | current | Additional bandwidth type of the profile. Options: 1. nonAssure(1) -Additional bandwidth type of the profile is non assure 2. bestEffort(2) -Additional bandwid… |
| 1.3.6.1.4.1.2011.6.128.1.1.3.21.1.11 | ColumnhwXponDeviceDbaProfilePriority | read-write | current | This object is used to set best effort bandwidth assignment priority. Ranging from 0 to 3, 0 is the lowest priority. The default value is 0. |
| 1.3.6.1.4.1.2011.6.128.1.1.3.21.1.12 | ColumnhwXponDeviceDbaProfileWeight | read-write | current | This object is used to set best effort bandwidth assignment weight. Ranging from 1 to 10000. The default value is 128. |
| 1.3.6.1.4.1.2011.6.128.1.1.3.22 | TablehwXponDeviceOntSnmpProfileInfoTable | not-accessible | current | This table is the SNMP parameter management profile of the ONT. The index of this table is hwXponDeviceOntSnmpProfileInfoNameIndex. |
| 1.3.6.1.4.1.2011.6.128.1.1.3.22.1 | RowhwXponDeviceOntSnmpProfileInfoEntry | not-accessible | current | This table is the SNMP parameter management profile of the ONT. The index of this entry is hwXponDeviceOntSnmpProfileInfoNameIndex. |
| 1.3.6.1.4.1.2011.6.128.1.1.3.22.1.1 | ColumnhwXponDeviceOntSnmpProfileInfoNameIndex | not-accessible | current | This object indicates the ONT SNMP profile name. |
| 1.3.6.1.4.1.2011.6.128.1.1.3.22.1.2 | ColumnhwXponDeviceOntSnmpProfileVersion | read-write | current | This object indicates the SNMP version number. Options: 1. v1(1) - Indicates that the SNMP version is v1 2. v2c(2) - Indicates that the SNMP version is v2c 3. … |
| 1.3.6.1.4.1.2011.6.128.1.1.3.22.1.3 | ColumnhwXponDeviceOntSnmpProfileReadCommunityName | read-write | current | This object indicates the name of the read community. |
| 1.3.6.1.4.1.2011.6.128.1.1.3.22.1.4 | ColumnhwXponDeviceOntSnmpProfileWriteCommunityName | read-write | current | This object indicates the name of the write community. |
| 1.3.6.1.4.1.2011.6.128.1.1.3.22.1.5 | ColumnhwXponDeviceOntSnmpProfileTrapHostIP | read-write | current | This object indicates the target host address of sending trap msg. |
| 1.3.6.1.4.1.2011.6.128.1.1.3.22.1.6 | ColumnhwXponDeviceOntSnmpProfileTrapHostSrcUDPPort | read-write | current | This object indicates the ID of the host UDP source port from which the trap is sent. |
| 1.3.6.1.4.1.2011.6.128.1.1.3.22.1.7 | ColumnhwXponDeviceOntSnmpProfileSecurityName | read-write | current | This object indicates the securityname of SNMP msg |
| 1.3.6.1.4.1.2011.6.128.1.1.3.22.1.8 | ColumnhwXponDeviceOntSnmpProfileRowStatus | read-create | current | The hwXponDeviceOntSnmpProfileRowStatus is used to create a new row or to modify or delete an existing row in this table. Options: 1. createAndGo(4) -create a … |
| 1.3.6.1.4.1.2011.6.128.1.1.3.22.1.9 | ColumnhwXponDeviceOntSnmpProfileUsmUsername | read-write | current | The name of the SNMPv3 user. |
| 1.3.6.1.4.1.2011.6.128.1.1.3.22.1.10 | ColumnhwXponDeviceOntSnmpProfileAuthenticationMode | read-write | current | This object indicates the user authentication mode. When the version of the SNMP profile is v1 or v2c, the invalid value will be returned. Options: 1. none(1) … |
| 1.3.6.1.4.1.2011.6.128.1.1.3.22.1.11 | ColumnhwXponDeviceOntSnmpProfileAuthenticationPassword | read-write | current | The authentication password. |
| 1.3.6.1.4.1.2011.6.128.1.1.3.22.1.12 | ColumnhwXponDeviceOntSnmpProfilePrivacyMode | read-write | current | This object indicates the user encryption mode. When the version of the SNMP profile is v1 or v2c, the invalid value will be returned. Options: 1. none(1) - No… |
| 1.3.6.1.4.1.2011.6.128.1.1.3.22.1.13 | ColumnhwXponDeviceOntSnmpProfilePrivacyPassword | read-write | current | The encryption password. |
| 1.3.6.1.4.1.2011.6.128.1.1.3.22.1.14 | ColumnhwXponDeviceOntSnmpProfileSecurityLevel | read-write | current | This object indicates the trap security level. When the version of the SNMP profile is v1 or v2c, the invalid value will be returned. Options: 1. privacy(1) - … |
| 1.3.6.1.4.1.2011.6.128.1.1.3.23 | TablehwXponDeviceOntPortClassTable | not-accessible | current | The configuration table of the XPON classification. The index of this table is a combination of hwXponDeviceOntPortClassProfileIdIndex, hwXponDeviceOntPortClas… |
| 1.3.6.1.4.1.2011.6.128.1.1.3.23.1 | RowhwXponDeviceOntPortClassEntry | not-accessible | current | The configuration table of the XPON classification. The index of this entry is a combination of hwXponDeviceOntPortClassProfileIdIndex, hwXponDeviceOntPortClas… |
| 1.3.6.1.4.1.2011.6.128.1.1.3.23.1.1 | ColumnhwXponDeviceOntPortClassProfileIdIndex | not-accessible | current | This object indicates the profile index. |
| 1.3.6.1.4.1.2011.6.128.1.1.3.23.1.2 | ColumnhwXponDeviceOntPortClassPrecedenceIndex | not-accessible | current | This object indicates the precedence-rule |
| 1.3.6.1.4.1.2011.6.128.1.1.3.23.1.3 | ColumnhwXponDeviceOntPortClassConditionIndex | not-accessible | current | This object indicates the conditionindex-condition. |
| 1.3.6.1.4.1.2011.6.128.1.1.3.23.1.4 | ColumnhwXponDeviceOntPortClassProfileRefNum | read-only | current | This object indicates the profile binding times. |
| 1.3.6.1.4.1.2011.6.128.1.1.3.23.1.5 | ColumnhwXponDeviceOntPortClassProfileName | read-write | current | This object indicates the profile name. |
| 1.3.6.1.4.1.2011.6.128.1.1.3.23.1.6 | ColumnhwXponDeviceOntPortClassProfileQueuemapped | read-write | current | This object indicates the mapping queue. The valid value range is 0~255. The value (-1) indicates that the query fails or no information is detected. |
| 1.3.6.1.4.1.2011.6.128.1.1.3.23.1.7 | ColumnhwXponDeviceOntPortClassProfilePriMark | read-write | current | This object indicates the priority mark. The valid value range is 0~7,255. The value (-1) indicates that the query fails or no information is detected. |
| 1.3.6.1.4.1.2011.6.128.1.1.3.23.1.8 | ColumnhwXponDeviceOntPortClassProfileFieldselect | read-write | current | This object indicates the field selected corresponding the condition. The value (0) indicates that the field is classified by destination MAC. The value (1) in… |
| 1.3.6.1.4.1.2011.6.128.1.1.3.23.1.9 | ColumnhwXponDeviceOntPortClassProfileOperator | read-write | current | This object indicates the operator flag. The value (0) indicates that the operator flag is never match. The value (1) indicates that the operator flag is equal… |
| 1.3.6.1.4.1.2011.6.128.1.1.3.23.1.10 | ColumnhwXponDeviceOntPortClassProfileMatchValue | read-write | current | This object indicates the match values. |
| 1.3.6.1.4.1.2011.6.128.1.1.3.23.1.11 | ColumnhwXponDeviceOntPortClassProfileRowStatus | read-create | current | The hwXponDeviceOntPortClassProfileRowStatus is used to create a new row or to modify or delete an existing row in this table. Options: 1. createAndGo(4) -crea… |
| 1.3.6.1.4.1.2011.6.128.1.1.3.41 | TablehwEponDeviceLineProfileInfoTable | not-accessible | current | This is the EPON line profile table. This table is used to create a EPON line profile. The index of this table is hwEponDeviceLineProfileInfoNameIndex. |
| 1.3.6.1.4.1.2011.6.128.1.1.3.41.1 | RowhwEponDeviceLineProfileInfoEntry | not-accessible | current | This is the EPON line profile table. This table is used to create a EPON line profile. The index of this entry is hwEponDeviceLineProfileInfoNameIndex. |
| 1.3.6.1.4.1.2011.6.128.1.1.3.41.1.1 | ColumnhwEponDeviceLineProfileInfoNameIndex | not-accessible | current | This object indicates the EPON line profile name index. |
| 1.3.6.1.4.1.2011.6.128.1.1.3.41.1.2 | ColumnhwEponDeviceLineProfileBindNum | read-only | current | This object indicates the number of ONT bound with EPON line profile. |
| 1.3.6.1.4.1.2011.6.128.1.1.3.41.1.3 | ColumnhwEponDeviceLineProfileFEC | read-write | current | This object indicates the EPON line profile FEC switch. Options: 1. enable (1) - Enable the EPON line profile FEC switch 2. disable (2) - Disable the EPON line… |
| 1.3.6.1.4.1.2011.6.128.1.1.3.41.1.4 | ColumnhwEponDeviceLineProfileCommit | read-write | current | This object indicates the EPON line profile configuration commit. Options: 1. commitExecute(1) - Execute the EPON line profile configuration commit 2. invalid(… |
| 1.3.6.1.4.1.2011.6.128.1.1.3.41.1.5 | ColumnhwEponDeviceLineProfileRowStatus | read-create | current | The hwEponDeviceLineProfileRowStatus is used to create a new row or to modify or delete an existing row in this table. Options: 1. createAndGo(4) -create a new… |
| 1.3.6.1.4.1.2011.6.128.1.1.3.41.1.6 | ColumnhwEponDeviceLineProfileTr069ManagementIpIndex | read-write | current | The index of IP host which used by TR069. |
| 1.3.6.1.4.1.2011.6.128.1.1.3.42 | TablehwEponDeviceLineProfLlidCfgTable | not-accessible | current | This is the XPON line profile LLID config table. This table is used to configure epon LLID. The index of this table is a combination of hwEponLineProfLlidCfgLi… |
| 1.3.6.1.4.1.2011.6.128.1.1.3.42.1 | RowhwEponDeviceLineProfLlidCfgEntry | not-accessible | current | This is the XPON line profile LLID config table. This table is used to configure epon LLID. The index of this entry is a combination of hwEponLineProfLlidCfgLi… |
| 1.3.6.1.4.1.2011.6.128.1.1.3.42.1.1 | ColumnhwEponLineProfLlidCfgLineProfNameIndex | not-accessible | current | This object indicates the XPON line profile name index. |
| 1.3.6.1.4.1.2011.6.128.1.1.3.42.1.2 | ColumnhwEponLineProfLlidCfgLlidIndex | not-accessible | current | This object indicates the XPON line profile LLID config Llid index. |
| 1.3.6.1.4.1.2011.6.128.1.1.3.42.1.3 | ColumnhwEponLineProfLlidCfgCarTrafficTableId | read-write | current | This object indicates the XPON line profile LLID config car profile index(1~1024, 0xfffe-unconcern). |
| 1.3.6.1.4.1.2011.6.128.1.1.3.42.1.4 | ColumnhwEponLineProfLlidCfgDbaProfileName | read-write | current | This object indicates the XPON line profile LLID config DBA profile name. |
| 1.3.6.1.4.1.2011.6.128.1.1.3.42.1.5 | ColumnhwEponLineProfLlidCfgEncryptMode | read-write | current | This object indicates the XPON line profile LLID config gem encryp mode. Options: 1. aes128(1) - Indicates that the XPON line profile LLID config gem encrypt m… |
| 1.3.6.1.4.1.2011.6.128.1.1.3.42.1.6 | ColumnhwEponLineProfLlidCfgQueueSetIndex1ReportBitMap | read-write | current | This object indicates the XPON line profile LLID config queue-set-1 report bitmap. |
| 1.3.6.1.4.1.2011.6.128.1.1.3.42.1.7 | ColumnhwEponLineProfLlidCfgQueueSetIndex1Threshold | read-write | current | This object indicates the XPON line profile LLID config queue-set-1 threshold value. |
| 1.3.6.1.4.1.2011.6.128.1.1.3.42.1.8 | ColumnhwEponLineProfLlidCfgQueueSetIndex2ReportBitMap | read-write | current | This object indicates the XPON line profile LLID config queue-set-2 report bitmap. |
| 1.3.6.1.4.1.2011.6.128.1.1.3.42.1.9 | ColumnhwEponLineProfLlidCfgQueueSetIndex2Threshold | read-write | current | This object indicates the XPON line profile LLID config queue-set-2 threshold value. |
| 1.3.6.1.4.1.2011.6.128.1.1.3.42.1.10 | ColumnhwEponLineProfLlidCfgQueueSetIndex3ReportBitMap | read-write | current | This object indicates the XPON line profile LLID config queue-set-3 report bitmap. |
| 1.3.6.1.4.1.2011.6.128.1.1.3.42.1.11 | ColumnhwEponLineProfLlidCfgQueueSetIndex3Threshold | read-write | current | This object indicates the XPON line profile LLID config queue-set-3 threshold value. |
| 1.3.6.1.4.1.2011.6.128.1.1.3.42.1.12 | ColumnhwEponLineProfLlidCfgRowStatus | read-create | current | The hwEponLineProfLlidCfgRowStatus is used to create a new row or to modify or delete an existing row in this table. Options: 1. createAndGo(4) -create a new i… |
| 1.3.6.1.4.1.2011.6.128.1.1.3.42.1.13 | ColumnhwEponLineProfLlidCfgCarTrafficTableName | read-write | current | This object indicates the XPON line profile LLID config car profile name. |
| 1.3.6.1.4.1.2011.6.128.1.1.3.43 | TablehwEponDeviceSrvProfileInfoTable | not-accessible | current | This is the EPON service profile table. The index of this table is hwEponDeviceSrvProfileInfoNameIndex. |
| 1.3.6.1.4.1.2011.6.128.1.1.3.43.1 | RowhwEponDeviceSrvProfileInfoEntry | not-accessible | current | This is the EPON service profile table. The index of this entry is hwEponDeviceSrvProfileInfoNameIndex. |
| 1.3.6.1.4.1.2011.6.128.1.1.3.43.1.1 | ColumnhwEponDeviceSrvProfileInfoNameIndex | not-accessible | current | This object indicates the EPON line profile name index. |
| 1.3.6.1.4.1.2011.6.128.1.1.3.43.1.2 | ColumnhwEponDeviceSrvProfileBindNum | read-only | current | This object indicates the number of ONT bound with EPON service profile. |
| 1.3.6.1.4.1.2011.6.128.1.1.3.43.1.3 | ColumnhwEponDeviceSrvProfileCommit | read-write | current | This object indicates the EPON service profile configuration commit. Options: 1. commitExecute(1) - Execute the EPON service profile configuration commit 2. in… |
| 1.3.6.1.4.1.2011.6.128.1.1.3.43.1.4 | ColumnhwEponDeviceSrvProfileRowStatus | read-create | current | The hwEponDeviceSrvProfileRowStatus is used to create a new row or to modify or delete an existing row in this table. Options: 1. createAndGo(4) -create a new … |
| 1.3.6.1.4.1.2011.6.128.1.1.3.44 | TablehwEponDeviceSrvProfileOntCfgTable | not-accessible | current | This is the EPON service profile ont config table. The index of this table is hwEponDeviceSrvProfOntCfgSrvProfNameIndex. |
| 1.3.6.1.4.1.2011.6.128.1.1.3.44.1 | RowhwEponDeviceSrvProfileOntCfgEntry | not-accessible | current | This is the EPON service profile ont config table. The index of this entry is hwEponDeviceSrvProfOntCfgSrvProfNameIndex. |
| 1.3.6.1.4.1.2011.6.128.1.1.3.44.1.1 | ColumnhwEponDeviceSrvProfOntCfgSrvProfNameIndex | not-accessible | current | This object indicates the EPON service profile name index. |
| 1.3.6.1.4.1.2011.6.128.1.1.3.44.1.2 | ColumnhwEponDeviceSrvProfilePotsNum | read-write | current | This object indicates the XPON service profile pots port number. A special value of 0xFE (254) indicates the number of port is adaptive. |
| 1.3.6.1.4.1.2011.6.128.1.1.3.44.1.3 | ColumnhwEponDeviceSrvProfileEthNum | read-write | current | This object indicates the XPON service profile eth port number. A special value of 0xFE (254) indicates the number of port is adaptive. |
| 1.3.6.1.4.1.2011.6.128.1.1.3.44.1.4 | ColumnhwEponDeviceSrvProfileTdmPortNum | read-write | current | This object indicates the XPON service profile tdm port number. |
| 1.3.6.1.4.1.2011.6.128.1.1.3.44.1.5 | ColumnhwEponDeviceSrvProfileTdmPortType | read-write | current | This object indicates the XPON service profile tdm port type. Options: 1. t1(13) - T1 2. e1(14) - E1 3. invalid(-1) - Indicates that the query fails or no info… |
| 1.3.6.1.4.1.2011.6.128.1.1.3.44.1.6 | ColumnhwEponDeviceSrvProfileMulticastMode | read-write | current | This object indicates the XPON service profile multicast mode. Options: 1. ctc(1) - Indicates that the XPON service profile multicast mode is CTC 2. igmpsnoopi… |
| 1.3.6.1.4.1.2011.6.128.1.1.3.44.1.7 | ColumnhwEponDeviceSrvProfileMulticastQuickLeaveSwitch | read-write | current | This object indicates the XPON service profile multicast quick leave switch. Options: 1. enable(1) - Enable the XPON service profile multicast quick leave swit… |
| 1.3.6.1.4.1.2011.6.128.1.1.3.44.1.8 | ColumnhwEponDeviceSrvProfileRingCheckSwitch | read-write | current | This object indicates the XPON service profile ring check function switch. Options: 1. enable(1) - Enable the XPON service profile ring check function switch 2… |
| 1.3.6.1.4.1.2011.6.128.1.1.3.44.1.9 | ColumnhwEponDeviceSrvProfileRingCheckAutoShutdownSwitch | read-write | current | This object indicates the XPON service profile ring check auto shutdown function switch Options: 1. enable(1) - Indicates that the XPON service profile ring ch… |
| 1.3.6.1.4.1.2011.6.128.1.1.3.44.1.10 | ColumnhwEponDeviceSrvProfileMaxNumOfAdapPotsPort | read-write | current | This object indicates the max number of adaptive pots ports. Range: 1-32. 32 is default value. |
| 1.3.6.1.4.1.2011.6.128.1.1.3.44.1.11 | ColumnhwEponDeviceSrvProfileMaxNumOfAdapEthPort | read-write | current | This object indicates the max number of adaptive eth ports. Range: 1-24. 8 is default value. |
| 1.3.6.1.4.1.2011.6.128.1.1.3.45 | TablehwEponDeviceSrvProfMulticastVlanCfgTable | not-accessible | current | This is the EPON service profile multicast vlan config table. The index of this table is a combination of hwEponDeviceSrvProfMulticastVlanCfgSrvProfNameIndex, … |
| 1.3.6.1.4.1.2011.6.128.1.1.3.45.1 | RowhwEponDeviceSrvProfMulticastVlanCfgEntry | not-accessible | current | This is the EPON service profile multicast vlan config table. The index of this entry is a combination of hwEponDeviceSrvProfMulticastVlanCfgSrvProfNameIndex, … |
| 1.3.6.1.4.1.2011.6.128.1.1.3.45.1.1 | ColumnhwEponDeviceSrvProfMulticastVlanCfgSrvProfNameIndex | not-accessible | current | This object indicates the XPON service profile name index. |
| 1.3.6.1.4.1.2011.6.128.1.1.3.45.1.2 | ColumnhwEponDeviceSrvProfMulticastVlanCfgOntPhyType | not-accessible | current | This object indicates the port type of the ONT. Options: 1. t1(13) - T1 2. e1(14) - E1 3. fe(24) - FE 4. ge(34) - GE 5. moca(46) - MOCA 6. eth(47) - ETH 7. iph… |
| 1.3.6.1.4.1.2011.6.128.1.1.3.45.1.3 | ColumnhwEponDeviceSrvProfMulticastVlanCfgOntPhyIndex | not-accessible | current | This object indicates the port index of the ONT |
| 1.3.6.1.4.1.2011.6.128.1.1.3.45.1.4 | ColumnhwEponDeviceSrvProfMulticastVlanCfgMulticastVlan | not-accessible | current | This object indicates the EPON service profile multicast vlan. |
| 1.3.6.1.4.1.2011.6.128.1.1.3.45.1.5 | ColumnhwEponDeviceSrvProfMulticastVlanCfgRowStatus | read-create | current | The hwEponDeviceSrvProfMulticastVlanCfgRowStatus is used to create a new row or to modify or delete an existing row in this table. Options: 1. createAndGo(4) -… |
| 1.3.6.1.4.1.2011.6.128.1.1.3.45.1.6 | ColumnhwEponDeviceSrvProfMulticastVlanCfgTranslatedVlan | read-write | current | This object indicates the EPON service profile multicast translated VLAN. |
| 1.3.6.1.4.1.2011.6.128.1.1.3.46 | TablehwEponDeviceSrvProfPortVlanCfgTable | not-accessible | current | This is the EPON service profile port vlan config table. The index of this table is a combination of hwEponDeviceSrvProfPortVlanCfgSrvProfNameIndex, hwEponDevi… |
| 1.3.6.1.4.1.2011.6.128.1.1.3.46.1 | RowhwEponDeviceSrvProfPortVlanCfgEntry | not-accessible | current | This is the EPON service profile port vlan config table. The index of this entry is a combination of hwEponDeviceSrvProfPortVlanCfgSrvProfNameIndex, hwEponDevi… |
| 1.3.6.1.4.1.2011.6.128.1.1.3.46.1.1 | ColumnhwEponDeviceSrvProfPortVlanCfgSrvProfNameIndex | not-accessible | current | This object indicates the XPON service profile name index. |
| 1.3.6.1.4.1.2011.6.128.1.1.3.46.1.2 | ColumnhwEponDeviceSrvProfPortVlanCfgOntPhyType | not-accessible | current | This object indicates the port type of the ONT. Options: 1. t1(13) - T1 2. e1(14) - E1 3. fe(24) - FE 4. ge(34) - GE 5. moca(46) - MOCA 6. eth(47) - ETH 7. iph… |
| 1.3.6.1.4.1.2011.6.128.1.1.3.46.1.3 | ColumnhwEponDeviceSrvProfPortVlanCfgOntPhyIndex | not-accessible | current | This object indicates the port index of the ONT. |
| 1.3.6.1.4.1.2011.6.128.1.1.3.46.1.4 | ColumnhwEponDeviceSrvProfPortVlanCfgPortVlanType | read-write | current | This object indicates the XPON service profile port vlan type. Options: 1. transparent(1) - Indicates that the XPON service profile port vlan type is transpare… |
| 1.3.6.1.4.1.2011.6.128.1.1.3.46.1.5 | ColumnhwEponDeviceSrvProfPortVlanCfgPortCVlan | not-accessible | current | This object indicates the EPON service profile port customer vlan. The value 65534 indicates that the vlan mode of ont's port is transparent. |
| 1.3.6.1.4.1.2011.6.128.1.1.3.46.1.6 | ColumnhwEponDeviceSrvProfPortVlanCfgPortSVlan | read-write | current | This object indicates the EPON service profile port service vlan. The value(-1) is invalid value. |
| 1.3.6.1.4.1.2011.6.128.1.1.3.46.1.7 | ColumnhwEponDeviceSrvProfPortVlanCfgRowStatus | read-create | current | The hwEponDeviceSrvProfPortVlanCfgRowStatus is used to create a new row or to modify or delete an existing row in this table. Options: 1. createAndGo(4) -creat… |
| 1.3.6.1.4.1.2011.6.128.1.1.3.47 | TablehwEponDeviceSrvProfOntPortCfgTable | not-accessible | current | This is the EPON service profile ont port config table. The index of this table is a combination of hwEponDeviceSrvProfOntPortCfgSrvProfNameIndex, hwEponDevice… |
| 1.3.6.1.4.1.2011.6.128.1.1.3.47.1 | RowhwEponDeviceSrvProfOntPortCfgEntry | not-accessible | current | This is the EPON service profile ont port config table. The index of this entry is a combination of hwEponDeviceSrvProfOntPortCfgSrvProfNameIndex, hwEponDevice… |
| 1.3.6.1.4.1.2011.6.128.1.1.3.47.1.1 | ColumnhwEponDeviceSrvProfOntPortCfgSrvProfNameIndex | not-accessible | current | This object indicates the XPON service profile name index. |
| 1.3.6.1.4.1.2011.6.128.1.1.3.47.1.2 | ColumnhwEponDeviceSrvProfOntPortCfgOntPhyType | not-accessible | current | This object indicates the port type of the ONT. Options: 1. t1(13) - T1 2. e1(14) - E1 3. fe(24) - FE 4. ge(34) - GE 5. moca(46) - MOCA 6. eth(47) - ETH 7. iph… |
| 1.3.6.1.4.1.2011.6.128.1.1.3.47.1.3 | ColumnhwEponDeviceSrvProfOntPortCfgOntPhyIndex | not-accessible | current | This object indicates the port index of the ONT. |
| 1.3.6.1.4.1.2011.6.128.1.1.3.47.1.4 | ColumnhwEponDeviceSrvProfOntPortCfgUpStreamCarTrafficTableId | read-write | current | This object indicates the XPON service profile ont port up-stream car profile id. |
| 1.3.6.1.4.1.2011.6.128.1.1.3.47.1.5 | ColumnhwEponDeviceSrvProfOntPortCfgDownStreamCarTrafficTableId | read-write | current | This object indicates the XPON service profile ont port down-stream car profile id. |
| 1.3.6.1.4.1.2011.6.128.1.1.3.47.1.6 | ColumnhwEponDeviceSrvProfOntPortCfgMaxMacAddressNum | read-write | current | This object indicates the XPON service profile ont port max mac-address number. |
| 1.3.6.1.4.1.2011.6.128.1.1.3.47.1.7 | ColumnhwEponDeviceSrvProfOntPortCfgClassProfileIndex | read-write | current | This object indicates the XPON service profile port config class profile index. |
| 1.3.6.1.4.1.2011.6.128.1.1.3.47.1.8 | ColumnhwEponDeviceSrvProfOntPortCfgMulticastStripSwitch | read-write | current | This object indicates the XPON service profile multicast strip switch. Options: 1. tag(1) - Indicates that the XPON service profile multicast strip switch is t… |
| 1.3.6.1.4.1.2011.6.128.1.1.3.47.1.9 | ColumnhwEponDeviceSrvProfOntPortCfgMaxGroupNum | read-write | current | This object indicates the max multicast group num on port. |
| 1.3.6.1.4.1.2011.6.128.1.1.3.47.1.10 | ColumnhwEponDeviceSrvProfOntPortCfgUpStreamCarTrafficTableName | read-write | current | This object indicates the XPON service profile ont port up-stream car profile name. |
| 1.3.6.1.4.1.2011.6.128.1.1.3.47.1.11 | ColumnhwEponDeviceSrvProfOntPortCfgDownStreamCarTrafficTableName | read-write | current | This object indicates the XPON service profile ont port down-stream car profile name. |
| 1.3.6.1.4.1.2011.6.128.1.1.3.61 | TablehwGponDeviceLineProfileInfoTable | not-accessible | current | This is the GPON line profile table. This table is used to create a GPON line profile. The index of this table is hwGponDeviceLineProfileInfoNameIndex. |
| 1.3.6.1.4.1.2011.6.128.1.1.3.61.1 | RowhwGponDeviceLineProfileInfoEntry | not-accessible | current | This is the GPON line profile table. This table is used to create a GPON line profile. The index of this entry is hwGponDeviceLineProfileInfoNameIndex. |
| 1.3.6.1.4.1.2011.6.128.1.1.3.61.1.1 | ColumnhwGponDeviceLineProfileInfoNameIndex | not-accessible | current | This object indicates the GPON line profile name index. |
| 1.3.6.1.4.1.2011.6.128.1.1.3.61.1.2 | ColumnhwGponDeviceLineProfileBindNum | read-only | current | This object indicates the number of ONT bound with GPON line profile. |
| 1.3.6.1.4.1.2011.6.128.1.1.3.61.1.3 | ColumnhwGponDeviceLineProfileUpFEC | read-write | current | This object indicates the GPON line profile upstream FEC. Options: 1. enable (1) - Enable the GPON line profile upstream FEC 2. disable (2) - Disable the GPON … |
| 1.3.6.1.4.1.2011.6.128.1.1.3.61.1.4 | ColumnhwGponDeviceLineProfileMappingMode | read-write | current | This object indicates the GPON line profile mapping mode. Options: 1. vlan(1) - The GPON line profile mapping mode is vlan 2. pri8021p(2) - The GPON line profi… |
| 1.3.6.1.4.1.2011.6.128.1.1.3.61.1.5 | ColumnhwGponDeviceLineProfileQosMode | read-write | current | This object indicates the GPON line profile QOS mode. Options: 1. pq(1) - The GPON line profile QOS mode is PQ 2. gemcar(2) - The GPON line profile QOS mode is… |
| 1.3.6.1.4.1.2011.6.128.1.1.3.61.1.6 | ColumnhwGponDeviceLineProfileCommit | read-write | current | This object indicates the GPON Line Profile Configuration Commit. Options: 1. commitExecute(1) - Execute the GPON line profile configuration commit 2. clearRes… |
| 1.3.6.1.4.1.2011.6.128.1.1.3.61.1.7 | ColumnhwGponDeviceLineProfileRowStatus | read-create | current | The hwGponDeviceLineProfileRowStatus is used to create a new row or to modify or delete an existing row in this table. Options: 1. createAndGo(4) -create a new… |
| 1.3.6.1.4.1.2011.6.128.1.1.3.61.1.8 | ColumnhwGponDeviceLineProfileOMCCEncrypt | read-write | current | This object indicates the GPON line profile OMCC downstream encrypt status. Options: 1. on(1) - Indicates that the GPON line profile OMCC downstream encrypt st… |
| 1.3.6.1.4.1.2011.6.128.1.1.3.61.1.9 | ColumnhwGponDeviceLineProfileTr069ManagementSwitch | read-write | current | This object indicates the GPON line profile tr069 management status. Options: 1. enable(1) - Enable the GPON line profile tr069 management status 2. disable(2)… |
| 1.3.6.1.4.1.2011.6.128.1.1.3.61.1.11 | ColumnhwGponDeviceLineProfileCommitResult | read-only | current | This object indicates the commit result of a GPON line profile, the aging time of the result is 20s. Options: 1. success(1) - Indicates that the commit result … |
| 1.3.6.1.4.1.2011.6.128.1.1.3.61.1.12 | ColumnhwGponDeviceLineProfileTr069ManagementIpIndex | read-write | current | The index of IP host which used by TR069. |
| 1.3.6.1.4.1.2011.6.128.1.1.3.62 | TablehwGponDeviceLineProfTcontCfgTable | not-accessible | current | This is the XPON line profile tcont config table. This table is used to configure tcont. The index of this table is a combination of hwGponDeviceLineProfTcontC… |
| 1.3.6.1.4.1.2011.6.128.1.1.3.62.1 | RowhwGponDeviceLineProfTcontCfgEntry | not-accessible | current | This is the XPON line profile tcont config table. This table is used to configure tcont. The index of this entry is a combination of hwGponDeviceLineProfTcontC… |
| 1.3.6.1.4.1.2011.6.128.1.1.3.62.1.1 | ColumnhwGponDeviceLineProfTcontCfgLineProfNameIndex | not-accessible | current | This object indicates the XPON line profile name index. |
| 1.3.6.1.4.1.2011.6.128.1.1.3.62.1.2 | ColumnhwGponDeviceLineProfTcontCfgTcontIndex | not-accessible | current | This object indicates the XPON line profile tcont index. |
| 1.3.6.1.4.1.2011.6.128.1.1.3.62.1.3 | ColumnhwGponDeviceLineProfTcontCfgDbaProfileName | read-write | current | This object indicates the XPON line profile tcont config DBA profile name. |
| 1.3.6.1.4.1.2011.6.128.1.1.3.62.1.4 | ColumnhwGponDeviceLineProfTcontCfgRowStatus | read-create | current | The hwGponDeviceLineProfTcontCfgRowStatus is used to create a new row or to modify or delete an existing row in this table. Options: 1. createAndGo(4) -create … |
| 1.3.6.1.4.1.2011.6.128.1.1.3.63 | TablehwGponDeviceLineProfGemCfgTable | not-accessible | current | This is the XPON line profile gem config table. This table is used to configure gem. The index of this table is a combination of hwGponDeviceLineProfGemCfgLine… |
| 1.3.6.1.4.1.2011.6.128.1.1.3.63.1 | RowhwGponDeviceLineProfGemCfgEntry | not-accessible | current | This is the XPON line profile gem config table. This table is used to configure gem. The index of this entry is a combination of hwGponDeviceLineProfGemCfgLine… |
| 1.3.6.1.4.1.2011.6.128.1.1.3.63.1.1 | ColumnhwGponDeviceLineProfGemCfgLineProfNameIndex | not-accessible | current | This object indicates the XPON line profile name index. |
| 1.3.6.1.4.1.2011.6.128.1.1.3.63.1.2 | ColumnhwGponDeviceLineProfGemCfgGemIndex | not-accessible | current | This object indicates the XPON line profile gem config gem index. |
| 1.3.6.1.4.1.2011.6.128.1.1.3.63.1.3 | ColumnhwGponDeviceLineProfGemCfgCarTrafficTableId | read-write | current | This object indicates the XPON line profile gem config car profile index. |
| 1.3.6.1.4.1.2011.6.128.1.1.3.63.1.4 | ColumnhwGponDeviceLineProfGemCfgTcontIndex | read-write | current | This object indicates the XPON line profile gem config bind tcont index. |
| 1.3.6.1.4.1.2011.6.128.1.1.3.63.1.5 | ColumnhwGponDeviceLineProfGemCfgServiceType | read-write | current | This object indicates the XPON line profile gem config gem service type. Options: 1. eth(1) - ETH 2. tdm(2) - TDM |
| 1.3.6.1.4.1.2011.6.128.1.1.3.63.1.6 | ColumnhwGponDeviceLineProfGemCfgEncryptMode | read-write | current | This object indicates the XPON line profile gem config gem encrypt mode. Options: 1. on(1) - Indicates that the XPON line profile gem config gem encrypt mode i… |
| 1.3.6.1.4.1.2011.6.128.1.1.3.63.1.7 | ColumnhwGponDeviceLineProfGemCfgCascadeMode | read-write | current | This object indicates the XPON line profile gem config gem cascade switch. Options: 1. on(1) - Indicates that the XPON line profile gem config gem cascade swit… |
| 1.3.6.1.4.1.2011.6.128.1.1.3.63.1.8 | ColumnhwGponDeviceLineProfGemCfgUpPQIndex | read-write | current | This object indicates the XPON line profile gem config up stream PQ index. |
| 1.3.6.1.4.1.2011.6.128.1.1.3.63.1.9 | ColumnhwGponDeviceLineProfGemCfgRowStatus | read-create | current | The hwGponDeviceLineProfGemCfgRowStatus is used to create a new row or to modify or delete an existing row in this table. Options: 1. createAndGo(4) -create a … |
| 1.3.6.1.4.1.2011.6.128.1.1.3.63.1.10 | ColumnhwGponDeviceLineProfGemCfgDownPQIndex | read-write | current | This object indicates the XPON line profile gem config down stream PQ index. 0..7: Down Stream PQ index, 254 : Apaptive, Gemport Down Stream PQ is decided by o… |
| 1.3.6.1.4.1.2011.6.128.1.1.3.63.1.11 | ColumnhwGponDeviceLineProfGemCfgCarTrafficTableName | read-write | current | This object indicates the XPON line profile gem config car profile name. |
| 1.3.6.1.4.1.2011.6.128.1.1.3.64 | TablehwGponDeviceLineProfMappingCfgTable | not-accessible | current | This is the XPON line profile flow config table. This table is used to configure gem mapping to service. The index of this table is a combination of hwGponDevi… |
| 1.3.6.1.4.1.2011.6.128.1.1.3.64.1 | RowhwGponDeviceLineProfMappingCfgEntry | not-accessible | current | This is the XPON line profile flow config table. This table is used to configure gem mapping to service. The index of this entry is a combination of hwGponDevi… |
| 1.3.6.1.4.1.2011.6.128.1.1.3.64.1.1 | ColumnhwGponDeviceLineProfMappingCfgLineProfNameIndex | not-accessible | current | This object indicates the XPON line profile name index. |
| 1.3.6.1.4.1.2011.6.128.1.1.3.64.1.2 | ColumnhwGponDeviceLineProfMappingCfgGemIndex | not-accessible | current | This object indicates the XPON line profile mapping config gem index. |
| 1.3.6.1.4.1.2011.6.128.1.1.3.64.1.3 | ColumnhwGponDeviceLineProfMappingCfgMappingIndex | not-accessible | current | This object indicates the XPON line profile mapping config flow index. |
| 1.3.6.1.4.1.2011.6.128.1.1.3.64.1.4 | ColumnhwGponDeviceLineProfMappingCfgMappingMode | read-write | current | This object indicates the XPON line profile mapping config mapping mode. Options: 1. vlan(1) - The XPON line profile mapping mode is vlan 2. pri8021p(2) - The … |
| 1.3.6.1.4.1.2011.6.128.1.1.3.64.1.5 | ColumnhwGponDeviceLineProfMappingCfgCarTrafficTableId | read-write | current | This object indicates the XPON line profile mapping config car profile index. |
| 1.3.6.1.4.1.2011.6.128.1.1.3.64.1.6 | ColumnhwGponDeviceLineProfMappingCfgOntPhyType | read-write | current | This object indicates the port type of the ONT. Options: 1. t1(13) - T1 2. e1(14) - E1 3. fe(24) - FE 4. ge(34) - GE 5. vdsl(37) - VDSL 6. moca(46) - MOCA 7. e… |
| 1.3.6.1.4.1.2011.6.128.1.1.3.64.1.7 | ColumnhwGponDeviceLineProfMappingCfgOntPhyIndex | read-write | current | This object indicates the port index of the ONT, or the bundle-groupid when it is the eth-bundle port type. |
| 1.3.6.1.4.1.2011.6.128.1.1.3.64.1.8 | ColumnhwGponDeviceLineProfMappingCfgVlanId | read-write | current | This object indicates the VLAN ID of the service. The value -1 indicates invalid VLAN ID, and 65533 indicates untag traffic stream. |
| 1.3.6.1.4.1.2011.6.128.1.1.3.64.1.9 | ColumnhwGponDeviceLineProfMappingCfgVlanPriority | read-write | current | This object indicates the priority of the service. |
| 1.3.6.1.4.1.2011.6.128.1.1.3.64.1.10 | ColumnhwGponDeviceLineProfMappingCfgRowStatus | read-create | current | The hwGponDeviceLineProfMappingCfgRowStatus is used to create a new row or to modify or delete an existing row in this table. Options: 1. createAndGo(4) -creat… |
| 1.3.6.1.4.1.2011.6.128.1.1.3.64.1.11 | ColumnhwGponDeviceLineProfMappingTransparent | read-write | current | This object indicates the flow transparent switch of the ONT. Options: 1. enable(1) - Enable the flow transparent switch of the ONT 2. disable(2) - Disable the… |
| 1.3.6.1.4.1.2011.6.128.1.1.3.64.1.12 | ColumnhwGponDeviceLineProfMappingCfgCarTrafficTableName | read-write | current | This object indicates the XPON line profile mapping config car profile name. |
| 1.3.6.1.4.1.2011.6.128.1.1.3.65 | TablehwGponDeviceSrvProfileInfoTable | not-accessible | current | This is the GPON service profile table. The index of this table is hwGponDeviceSrvProfileInfoNameIndex. |
| 1.3.6.1.4.1.2011.6.128.1.1.3.65.1 | RowhwGponDeviceSrvProfileInfoEntry | not-accessible | current | This is the GPON service profile table. The index of this entry is hwGponDeviceSrvProfileInfoNameIndex. |
| 1.3.6.1.4.1.2011.6.128.1.1.3.65.1.1 | ColumnhwGponDeviceSrvProfileInfoNameIndex | not-accessible | current | This object indicates the GPON service profile name index. |
| 1.3.6.1.4.1.2011.6.128.1.1.3.65.1.2 | ColumnhwGponDeviceSrvProfileBindNum | read-only | current | This object indicates the number of ONT bound with GPON service profile. |
| 1.3.6.1.4.1.2011.6.128.1.1.3.65.1.3 | ColumnhwGponDeviceSrvProfileCommit | read-write | current | This object indicates the GPON service profile configuration commit. Options: 1. commitExecute(1) - Execute the GPON service profile configuration commit 2. in… |
| 1.3.6.1.4.1.2011.6.128.1.1.3.65.1.4 | ColumnhwGponDeviceSrvProfileRowStatus | read-create | current | The hwGponDeviceSrvProfileRowStatus is used to create a new row or to modify or delete an existing row in this table. Options: 1. createAndGo(4) -create a new … |
| 1.3.6.1.4.1.2011.6.128.1.1.3.66 | TablehwGponDeviceSrvProfileOntCfgTable | not-accessible | current | This is GPON service profile ont config table. The index of this table is hwGponDeviceSrvProfOntCfgSrvProfNameIndex. |
| 1.3.6.1.4.1.2011.6.128.1.1.3.66.1 | RowhwGponDeviceSrvProfileOntCfgEntry | not-accessible | current | This is GPON service profile ont config table. The index of this entry is hwGponDeviceSrvProfOntCfgSrvProfNameIndex. |
| 1.3.6.1.4.1.2011.6.128.1.1.3.66.1.1 | ColumnhwGponDeviceSrvProfOntCfgSrvProfNameIndex | not-accessible | current | This object indicates the XPON service profile name index. |
| 1.3.6.1.4.1.2011.6.128.1.1.3.66.1.2 | ColumnhwGponDeviceSrvProfilePotsNum | read-write | current | This object indicates the XPON service profile pots port number. A special value of 0xFE (254) indicates the number of port is adaptive. |
| 1.3.6.1.4.1.2011.6.128.1.1.3.66.1.3 | ColumnhwGponDeviceSrvProfileEthNum | read-write | current | This object indicates the XPON service profile eth port number. A special value of 0xFE (254) indicates the number of port is adaptive. |
| 1.3.6.1.4.1.2011.6.128.1.1.3.66.1.4 | ColumnhwGponDeviceSrvProfileTdmPortNum | read-write | current | This object indicates the XPON service profile tdm port number. |
| 1.3.6.1.4.1.2011.6.128.1.1.3.66.1.5 | ColumnhwGponDeviceSrvProfileTdmPortType | read-write | current | This object indicates the XPON service profile tdm port type. Options: 1. t1(13) - T1 2. e1(14) - E1 3. invalid(-1) - Indicates that the query fails or no info… |
| 1.3.6.1.4.1.2011.6.128.1.1.3.66.1.6 | ColumnhwGponDeviceSrvProfileTdmPortSrvType | read-write | current | This object indicates the XPON service profile tdm port service type. Options: 1. tdmovergem(1) - Tdm over gem 2. cesop(2) - Cesop |
| 1.3.6.1.4.1.2011.6.128.1.1.3.66.1.7 | ColumnhwGponDeviceSrvProfileMocaNum | read-write | current | This object indicates the XPON service profile MOCA port number. |
| 1.3.6.1.4.1.2011.6.128.1.1.3.66.1.8 | ColumnhwGponDeviceSrvProfileCatvNum | read-write | current | This object indicates the XPON service profile catv port number. A special value of 0xFE (254) indicates the number of port is adaptive. |
| 1.3.6.1.4.1.2011.6.128.1.1.3.66.1.9 | ColumnhwGponDeviceSrvProfileMacAddressSwitch | read-write | current | This object indicates the XPON service profile mac address switch. Options: 1. enable(1) - Enable the XPON service profile mac address switch 2. disable(2) - D… |
| 1.3.6.1.4.1.2011.6.128.1.1.3.66.1.10 | ColumnhwGponDeviceSrvProfileTransparentSwitch | read-write | current | This object indicates the XPON service profile transparent switch. Options: 1. enable(1) - Enable the XPON service profile transparent switch 2. disable(2) - D… |
| 1.3.6.1.4.1.2011.6.128.1.1.3.66.1.11 | ColumnhwGponDeviceSrvProfileMultiSrvTransmitMode | read-write | current | This object indicates the XPON service profile igmp transmit mode. Options: 1. tagtranslation(1) - Indicates that the XPON service profile igmp transmit mode i… |
| 1.3.6.1.4.1.2011.6.128.1.1.3.66.1.12 | ColumnhwGponDeviceSrvProfileMulticastVlan | read-write | current | This object indicates the XPON service profile multicast vlan. value 4096 indicates IGMP-user-VLAN is used for multicast vlan. |
| 1.3.6.1.4.1.2011.6.128.1.1.3.66.1.13 | ColumnhwGponDeviceSrvProfileMulticastMode | read-write | current | This object indicates the XPON service profile multicast mode. Options: 1. oltcontrol(1) - Indicates that the XPON service profile multicast mode is olt contro… |
| 1.3.6.1.4.1.2011.6.128.1.1.3.66.1.14 | ColumnhwGponDeviceSrvProfileUpIgmpTransmitMode | read-write | current | This object indicates the XPON service profile upstream igmp packets forward mode. Options: 1. transparent(1) - Indicates that the XPON service profile upstrea… |
| 1.3.6.1.4.1.2011.6.128.1.1.3.66.1.15 | ColumnhwGponDeviceSrvProfileUpIgmpMsgTranslationVlan | read-write | current | XPON service profile upstream igmp packets will be translate to the translation vlan, if upstream igmp packets forward mode is translation(2). |
| 1.3.6.1.4.1.2011.6.128.1.1.3.66.1.16 | ColumnhwGponDeviceSrvProfileUpIgmpMsgPriority | read-write | current | When xpon service profile upstream igmp packets were added a vlan or translated to the translation vlan, priority was set. |
| 1.3.6.1.4.1.2011.6.128.1.1.3.66.1.17 | ColumnhwGponDeviceSrvProfileNativeVlanOption | read-write | current | This object indicates the XPON service profile native VLAN. Options: 1. concern(1) - Concern the XPON service profile native VLAN 2. unconcern(2) - Unconcern t… |
| 1.3.6.1.4.1.2011.6.128.1.1.3.66.1.18 | ColumnhwGponDeviceSrvProfileUpPqColorPolicy | read-write | current | This object indicates the GPON service profile upstream priority-queue color policy. Options: 1. noMarking(0) - Indicates that the upstream priority-queue colo… |
| 1.3.6.1.4.1.2011.6.128.1.1.3.66.1.19 | ColumnhwGponDeviceSrvProfileDownPqColorPolicy | read-write | current | This object indicates the GPON service profile downstream priority-queue color policy. Options: 1. noMarking(0) - Indicates that the downstream priority-queue … |
| 1.3.6.1.4.1.2011.6.128.1.1.3.66.1.20 | ColumnhwGponDeviceSrvProfileVdslPortNum | read-write | current | This object indicates the XPON service profile VDSL port number. A special value of 0xFE (254) indicates the number of port is adaptive. |
| 1.3.6.1.4.1.2011.6.128.1.1.3.66.1.21 | ColumnhwGponDeviceSrvProfileRingCheckSwitch | read-write | current | This object indicates the XPON service profile mac address switch. Options: 1. enable(1) - Enable the XPON service profile ring check switch 2. disable(2) - Di… |
| 1.3.6.1.4.1.2011.6.128.1.1.3.66.1.22 | ColumnhwGponDeviceSrvProfileRingCheckAutoShutdownSwitch | read-write | current | This object indicates the XPON service profile mac address switch. Options: 1. enable(1) - Enable the XPON service profile ring check auto shutdown switch 2. d… |
| 1.3.6.1.4.1.2011.6.128.1.1.3.66.1.23 | ColumnhwGponDeviceSrvProfileRingCheckDetectingFrequency | read-write | current | This object indicates the XPON service profile ring check detecting frequency. |
| 1.3.6.1.4.1.2011.6.128.1.1.3.66.1.24 | ColumnhwGponDeviceSrvProfileRingCheckResumeInterval | read-write | current | This object indicates the XPON service profile ring check resume frequency. |
| 1.3.6.1.4.1.2011.6.128.1.1.3.66.1.25 | ColumnhwGponDeviceSrvProfileMaxNumOfAdapPotsPort | read-write | current | This object indicates the max number of adaptive pots ports. Range: 1-32. 32 is default value. |
| 1.3.6.1.4.1.2011.6.128.1.1.3.66.1.26 | ColumnhwGponDeviceSrvProfileMaxNumOfAdapEthPort | read-write | current | This object indicates the max number of adaptive eth ports. Range: 1-24. 8 is default value. |
| 1.3.6.1.4.1.2011.6.128.1.1.3.66.1.27 | ColumnhwGponDeviceSrvProfileMaxNumOfAdapVdslPort | read-write | current | This object indicates the max number of adaptive vdsl ports. Range: 1-8. 8 is default value. |
| 1.3.6.1.4.1.2011.6.128.1.1.3.66.1.28 | ColumnhwGponDeviceSrvProfileMaxNumOfAdapCatvPort | read-write | current | This object indicates the max number of adaptive catv ports. Range: 1-8. 8 is default value. |
| 1.3.6.1.4.1.2011.6.128.1.1.3.66.1.29 | ColumnhwGponDeviceSrvProfileWifiPortNum | read-write | current | This object indicates the XPON service profile WiFi port number. Range: 0-4. 0 is default value. |
| 1.3.6.1.4.1.2011.6.128.1.1.3.66.1.30 | ColumnhwGponDeviceSrvProfileMonitorLinkSwitch | read-write | current | The switch of the ONT Monitor Link function. Options: 1. enable(1) -Enable the the ONT Monitor Link function 2. disable(2) -Disable the the ONT Monitor Link fu… |
| 1.3.6.1.4.1.2011.6.128.1.1.3.66.1.31 | ColumnhwGponDeviceSrvProfileMTU | read-write | current | This object indicates the ONT MTU value. Unit:byte. The value (0) indicates that the MTU value is decided by ONT. The value (-1) indicates that the query fails… |
| 1.3.6.1.4.1.2011.6.128.1.1.3.67 | TablehwGponDeviceSrvProfOntPortCfgTable | not-accessible | current | This is the GPON service profile ont port config table. The index of this table is a combination of hwGponDeviceSrvProfOntPortCfgSrvProfNameIndex, hwGponDevice… |
| 1.3.6.1.4.1.2011.6.128.1.1.3.67.1 | RowhwGponDeviceSrvProfOntPortCfgEntry | not-accessible | current | This is the GPON service profile ont port config table. The index of this entry is a combination of hwGponDeviceSrvProfOntPortCfgSrvProfNameIndex, hwGponDevice… |
| 1.3.6.1.4.1.2011.6.128.1.1.3.67.1.1 | ColumnhwGponDeviceSrvProfOntPortCfgSrvProfNameIndex | not-accessible | current | XPON service profile name index. |
| 1.3.6.1.4.1.2011.6.128.1.1.3.67.1.2 | ColumnhwGponDeviceSrvProfOntPortCfgOntPhyType | not-accessible | current | This object indicates the port type of the ONT. Options: 1. t1(13) - T1 2. e1(14) - E1 3. fe(24) - FE 4. ge(34) - GE 5. vdsl(37) - VDSL 6. moca(46) - MOCA 7. e… |
| 1.3.6.1.4.1.2011.6.128.1.1.3.67.1.3 | ColumnhwGponDeviceSrvProfOntPortCfgOntPhyIndex | not-accessible | current | This object indicates the port index of the ONT. |
| 1.3.6.1.4.1.2011.6.128.1.1.3.67.1.4 | ColumnhwGponDeviceSrvProfOntPortCfgTDMPortCodeMode | read-write | current | This object indicates the XPON service profile tdm port coding mode. Options: 1. ami(1) - AMI 2. hdb3(2) - HDB3 3. b8zs(3) - B8ZS 4. invalid(-1) - Indicates th… |
| 1.3.6.1.4.1.2011.6.128.1.1.3.67.1.5 | ColumnhwGponDeviceSrvProfOntPortCfgPortQinQMode | read-write | current | This object indicates the QinQ mode. Options: 1. disable(1) - Disable the QinQ mode 2. enable(2) - Enable the QinQ mode 3. unconcern(254) - The QinQ mode is no… |
| 1.3.6.1.4.1.2011.6.128.1.1.3.67.1.6 | ColumnhwGponDeviceSrvProfOntPortCfgPortPriorityPolicy | read-write | current | This object indicates the priority policy. Options: 1. assigned(1) - The priority policy is assigned 2. copycos(2) - The priority policy is copy CoS 3. unconce… |
| 1.3.6.1.4.1.2011.6.128.1.1.3.67.1.7 | ColumnhwGponDeviceSrvProfOntPortCfgUpStreamCarTrafficTableId | read-write | current | The upstream car profile index of the ONT port. |
| 1.3.6.1.4.1.2011.6.128.1.1.3.67.1.8 | ColumnhwGponDeviceSrvProfOntPortCfgDownStreamCarTrafficTableId | read-write | current | The downstream car profile index of the ONT port. |
| 1.3.6.1.4.1.2011.6.128.1.1.3.67.1.9 | ColumnhwGponDeviceSrvProfOntPortCfgDscpProfIndex | read-write | current | The dscp profile index of the ONT port. |
| 1.3.6.1.4.1.2011.6.128.1.1.3.67.1.10 | ColumnhwGponDeviceSrvProfOntPortCfgUpIgmpTransmitMode | read-write | current | This object indicates the upstream igmp packets transmit mode profile of GPON ONT port. Options: 1. transparent(1) - Indicates that the GPON ONT port upstream … |
| 1.3.6.1.4.1.2011.6.128.1.1.3.67.1.11 | ColumnhwGponDeviceSrvProfOntPortCfgUpIgmpMsgTranslationVlan | read-write | current | The GPON ONT port upstream igmp packets will be translate to the translation vlan, if GPON ONT port upstream igmp packets forward mode is translation(2) or def… |
| 1.3.6.1.4.1.2011.6.128.1.1.3.67.1.12 | ColumnhwGponDeviceSrvProfOntPortCfgUpIgmpMsgPriority | read-write | current | When GPON ONT port upstream igmp packets were added a vlan or translated to the translation vlan, priority was set. |
| 1.3.6.1.4.1.2011.6.128.1.1.3.67.1.13 | ColumnhwGponDeviceSrvProfOntPortCfgMaxMacAddressNum | read-write | current | This object indicates the maximum number of MAC addresses that can be learned on each ONT port. The number of MAC addresses learned on an ONT port should not g… |
| 1.3.6.1.4.1.2011.6.128.1.1.3.67.1.14 | ColumnhwGponDeviceSrvProfOntPortCfgTDMPortTxClockMode | read-write | current | This object indicates the tx-clock mode of ONT TDM port. Options: 1. adapt(1) - Indicates that the tx-clock mode of the ONT TDM port is adapt 2. system(2) - In… |
| 1.3.6.1.4.1.2011.6.128.1.1.3.67.1.15 | ColumnhwGponDeviceSrvProfOntPortCfgDownstreamMode | read-write | current | This object indicates the downstream mode of GPON ONT port. Options: 1. noOperation(1) - Indicates not to process the VLAN tag of the downstram packets 2. oper… |
| 1.3.6.1.4.1.2011.6.128.1.1.3.67.1.16 | ColumnhwGponDeviceSrvProfOntPortCfgUpStreamCarTrafficTableName | read-write | current | The upstream car profile name of the ONT port. |
| 1.3.6.1.4.1.2011.6.128.1.1.3.67.1.17 | ColumnhwGponDeviceSrvProfOntPortCfgDownStreamCarTrafficTableName | read-write | current | The downstream car profile name of the ONT port. |
| 1.3.6.1.4.1.2011.6.128.1.1.3.67.1.18 | ColumnhwGponDeviceSrvProfOntPortCfgClassProfileIndex | read-write | current | Indicates the index of the traffic classification profile configured on the ONT port. The valid value range is 1~256. The value (-1) indicates that the query f… |
| 1.3.6.1.4.1.2011.6.128.1.1.3.68 | TablehwGponDeviceSrvProfPortVlanCfgTable | not-accessible | current | This is the GPON service profile port vlan config table. The index of this table is a combination of hwGponDeviceSrvProfPortVlanCfgSrvProfNameIndex, hwGponDevi… |
| 1.3.6.1.4.1.2011.6.128.1.1.3.68.1 | RowhwGponDeviceSrvProfPortVlanCfgEntry | not-accessible | current | This is the GPON service profile port vlan config table. The index of this entry is a combination of hwGponDeviceSrvProfPortVlanCfgSrvProfNameIndex, hwGponDevi… |
| 1.3.6.1.4.1.2011.6.128.1.1.3.68.1.1 | ColumnhwGponDeviceSrvProfPortVlanCfgSrvProfNameIndex | not-accessible | current | This object indicates the XPON service profile name index. |
| 1.3.6.1.4.1.2011.6.128.1.1.3.68.1.2 | ColumnhwGponDeviceSrvProfPortVlanCfgOntPhyType | not-accessible | current | This object indicates the port type of the ONT. Options: 1. t1(13) - T1 2. e1(14) - E1 3. fe(24) - FE 4. ge(34) - GE 5. vdsl(37) - VDSL 6. wifi(40) - WiFi 7. m… |
| 1.3.6.1.4.1.2011.6.128.1.1.3.68.1.3 | ColumnhwGponDeviceSrvProfPortVlanCfgOntPhyIndex | not-accessible | current | This object indicates the port index of the ONT. |
| 1.3.6.1.4.1.2011.6.128.1.1.3.68.1.4 | ColumnhwGponDeviceSrvProfPortVlanCfgPortCVlan | not-accessible | current | This object indicates the GPON service profile port customer vlan. |
| 1.3.6.1.4.1.2011.6.128.1.1.3.68.1.5 | ColumnhwGponDeviceSrvProfPortVlanCfgRowStatus | read-create | current | The hwGponDeviceSrvProfPortVlanCfgRowStatus is used to create a new row or to modify or delete an existing row in this table. Options: 1. createAndGo(4) -creat… |
| 1.3.6.1.4.1.2011.6.128.1.1.3.68.1.6 | ColumnhwGponDeviceSrvProfPortVlanCfgPortVlanType | read-write | current | This object indicates the XPON service profile port vlan type. Options: 1. transparent(1) - Indicates that the XPON service profile port vlan type is transpare… |
| 1.3.6.1.4.1.2011.6.128.1.1.3.68.1.7 | ColumnhwGponDeviceSrvProfPortVlanCfgPortVlanSPri | read-write | current | This object indicates the GPON service profile port translation or qinq s-priority |
| 1.3.6.1.4.1.2011.6.128.1.1.3.68.1.8 | ColumnhwGponDeviceSrvProfPortVlanCfgPortSVlan | read-write | current | This object indicates the GPON service profile port service vlan. |
| 1.3.6.1.4.1.2011.6.128.1.1.3.68.1.9 | ColumnhwGponDeviceSrvProfPortVlanCfgPortVlanCPri | not-accessible | current | This object indicates the GPON service profile port translation or qinq c-priority. |
| 1.3.6.1.4.1.2011.6.128.1.1.3.68.1.10 | ColumnhwGponDeviceSrvProfPortVlanCfgEtherType | read-write | current | This object indicates the XPON service profile customer service encapsulation type. Options: 1. ipv4-ipoe(1) - Indicates that the XPON service profile customer… |
| 1.3.6.1.4.1.2011.6.128.1.1.3.68.1.11 | ColumnhwGponDeviceSrvProfPortVlanCfgPortVlanSPriPolicy | read-write | current | This object indicates the s-vlan priority policy. Options: 1. specify(1) - Indicates that the s-vlan priority policy is specified 2. userCos(2) - Indicates tha… |
| 1.3.6.1.4.1.2011.6.128.1.1.3.68.1.12 | ColumnhwGponDeviceSrvProfPortVlanCfgDscpDefaultPriority | read-write | current | This object indicates the default priority for dscpMapping policy. |
| 1.3.6.1.4.1.2011.6.128.1.1.3.68.1.13 | ColumnhwGponDeviceSrvProfPortVlanCfgPortVlanTlsSwitch | read-write | current | The switch used to config the attribute of vlan translation. Options: 1. off(1) - Indicates that the attribute of vlan translation is off 2. on(2) - Indicates … |
| 1.3.6.1.4.1.2011.6.128.1.1.3.69 | TablehwGponDeviceAlarmProfileInfoTable | not-accessible | current | This is the GPON alarm profile table. The index of this table is hwGponDeviceAlarmProfileInfoNameIndex. |
| 1.3.6.1.4.1.2011.6.128.1.1.3.69.1 | RowhwGponDeviceAlarmProfileInfoEntry | not-accessible | current | This is the GPON alarm profile table. The index of this entry is hwGponDeviceAlarmProfileInfoNameIndex. |
| 1.3.6.1.4.1.2011.6.128.1.1.3.69.1.1 | ColumnhwGponDeviceAlarmProfileInfoNameIndex | not-accessible | current | This object indicates the alarm profile name. |
| 1.3.6.1.4.1.2011.6.128.1.1.3.69.1.2 | ColumnhwGponDeviceAlarmProfileBindNum | read-only | current | This object indicates the binding times of the profile. |
| 1.3.6.1.4.1.2011.6.128.1.1.3.69.1.3 | ColumnhwGponDeviceAlarmProfileLostPacketsThreshold | read-write | current | This object indicates the loss of frames threshold of GEM port. |
| 1.3.6.1.4.1.2011.6.128.1.1.3.69.1.4 | ColumnhwGponDeviceAlarmProfileMisinsertedPacketsThreshold | read-write | current | This object indicates the mis-inserted frames threshold of GEM port. |
| 1.3.6.1.4.1.2011.6.128.1.1.3.69.1.5 | ColumnhwGponDeviceAlarmProfileImpairedBlocksThreshold | read-write | current | This object indicates the impaired blocks alarm threshold of GEM port. |
| 1.3.6.1.4.1.2011.6.128.1.1.3.69.1.6 | ColumnhwGponDeviceAlarmProfileFCSErrorsThreshold | read-write | current | This object indicates the Ethernet FCS errors alarm threshold. |
| 1.3.6.1.4.1.2011.6.128.1.1.3.69.1.7 | ColumnhwGponDeviceAlarmProfileExcessiveCollisionCounterThreshold | read-write | current | This object indicates the ethernet excessive collision count alarm threshold. |
| 1.3.6.1.4.1.2011.6.128.1.1.3.69.1.8 | ColumnhwGponDeviceAlarmProfileLateCollisionCounterThreshold | read-write | current | This object indicates the ethernet late collision count alarm threshold within 512 bit-times. |
| 1.3.6.1.4.1.2011.6.128.1.1.3.69.1.9 | ColumnhwGponDeviceAlarmProfileFrameTooLongsThreshold | read-write | current | This object indicates the too long Ethernet frames alarm threshold. |
| 1.3.6.1.4.1.2011.6.128.1.1.3.69.1.10 | ColumnhwGponDeviceAlarmProfileBufferOverflowsonReceiveThreshold | read-write | current | This object indicates the Ethernet buffer received overflows alarm threshold. |
| 1.3.6.1.4.1.2011.6.128.1.1.3.69.1.11 | ColumnhwGponDeviceAlarmProfileBufferOverflowsonTransmitThreshold | read-write | current | This object indicates the alarm threshold of transmit buffer overflows. |
| 1.3.6.1.4.1.2011.6.128.1.1.3.69.1.12 | ColumnhwGponDeviceAlarmProfileSingleCollisionFrameCounterThreshold | read-write | current | This object indicates alarm threshold of the Ethernet single collision frame count. |
| 1.3.6.1.4.1.2011.6.128.1.1.3.69.1.13 | ColumnhwGponDeviceAlarmProfileMultipleCollisionsFrameCounterThreshold | read-write | current | This object indicates the alarm threshold of Ethernet multiple collisions frame count. |
| 1.3.6.1.4.1.2011.6.128.1.1.3.69.1.14 | ColumnhwGponDeviceAlarmProfileSQECounterThreshold | read-write | current | This object indicates the alarm threshold of Ethernet SQE test error messages count. |
| 1.3.6.1.4.1.2011.6.128.1.1.3.69.1.15 | ColumnhwGponDeviceAlarmProfileDeferredTransmissionCounterThreshold | read-write | current | This object indicates the alarm threshold of the deferred frames count. |
| 1.3.6.1.4.1.2011.6.128.1.1.3.69.1.16 | ColumnhwGponDeviceAlarmProfileInternalmactransmiterrorcounterThreshold | read-write | current | This object indicates the alarm threshold of transmit errors at the MAC sub-layer. |
| 1.3.6.1.4.1.2011.6.128.1.1.3.69.1.17 | ColumnhwGponDeviceAlarmProfileCarrierSenseErrorCounterThreshold | read-write | current | This object indicates the alarm threshold of carrier sense errors. |
| 1.3.6.1.4.1.2011.6.128.1.1.3.69.1.18 | ColumnhwGponDeviceAlarmProfileAlignmentErrorCounterThreshold | read-write | current | This object indicates the alarm threshold of frame alignment errors. |
| 1.3.6.1.4.1.2011.6.128.1.1.3.69.1.19 | ColumnhwGponDeviceAlarmProfileInternalMACReceiveErrorCounterThreshold | read-write | current | This object indicates the alarm threshold of receive errors at the MAC sub-layer. |
| 1.3.6.1.4.1.2011.6.128.1.1.3.69.1.20 | ColumnhwGponDeviceAlarmProfilePPPoEFilteredFrameCounterThreshold | read-write | current | This object indicates the alarm threshold of filtered PPPoE frames. |
| 1.3.6.1.4.1.2011.6.128.1.1.3.69.1.21 | ColumnhwGponDeviceAlarmProfileDelayExceededDiscardThreshold | read-write | current | This object indicates the alarm threshold of frames discarded due to timeout. |
| 1.3.6.1.4.1.2011.6.128.1.1.3.69.1.22 | ColumnhwGponDeviceAlarmProfileMTUExceededDiscardThreshold | read-write | current | This object indicates the alarm threshold of frames dropped due to excessive MTU. |
| 1.3.6.1.4.1.2011.6.128.1.1.3.69.1.23 | ColumnhwGponDeviceAlarmProfileReceivedAndDiscardedThreshold | read-write | current | This object indicates the alarm threshold of received error frames. |
| 1.3.6.1.4.1.2011.6.128.1.1.3.69.1.26 | ColumnhwGponDeviceAlarmProfileCESErrorSecondsThreshold | read-write | current | This object indicates the alarm threshold of CES errored seconds. |
| 1.3.6.1.4.1.2011.6.128.1.1.3.69.1.27 | ColumnhwGponDeviceAlarmProfileCESSeverelyErrorSecondsThreshold | read-write | current | This object indicates the alarm threshold of CES severely errored seconds. |
| 1.3.6.1.4.1.2011.6.128.1.1.3.69.1.28 | ColumnhwGponDeviceAlarmProfileCESBurstyErrorSecondsThreshold | read-write | current | This object indicates the alarm threshold of CES bursty errored seconds. |
| 1.3.6.1.4.1.2011.6.128.1.1.3.69.1.29 | ColumnhwGponDeviceAlarmProfileCESUnavailableSecondsThreshold | read-write | current | This object indicates the alarm threshold of CES unavailable seconds. |
| 1.3.6.1.4.1.2011.6.128.1.1.3.69.1.30 | ColumnhwGponDeviceAlarmProfileCESControlledSlipSecondsThreshold | read-write | current | This object indicates the alarm threshold of CES controlled slip seconds. |
| 1.3.6.1.4.1.2011.6.128.1.1.3.69.1.31 | ColumnhwGponDeviceAlarmProfileDropEventsThreshold | read-write | current | This object indicates the alarm threshold of discarded packets. |
| 1.3.6.1.4.1.2011.6.128.1.1.3.69.1.32 | ColumnhwGponDeviceAlarmProfileUndersizepacketsThreshold | read-write | current | This object indicates the alarm threshold of undersized packets. |
| 1.3.6.1.4.1.2011.6.128.1.1.3.69.1.33 | ColumnhwGponDeviceAlarmProfileFragmentsThreshold | read-write | current | This object indicates the alarm threshold of fragments. |
| 1.3.6.1.4.1.2011.6.128.1.1.3.69.1.34 | ColumnhwGponDeviceAlarmProfileJabbersThreshold | read-write | current | This object indicates the alarm threshold of jabbers. |
| 1.3.6.1.4.1.2011.6.128.1.1.3.69.1.35 | ColumnhwGponDeviceAlarmProfileFailedSignalOfOnuThreshold | read-write | current | This object indicates the threshold of ONT signal failures(Format:1e-x).,range:3~8 for example: if the value of the leaf is 3,the actual value is 0.001, if the… |
| 1.3.6.1.4.1.2011.6.128.1.1.3.69.1.36 | ColumnhwGponDeviceAlarmProfileDegradedSignalOfOnuThreshold | read-write | current | This object indicates the threshold of ONT degraded signals(Format:1e-x),range:4~9 for example: if the value of the leaf is 4,the actual value is 0.0001, if th… |
| 1.3.6.1.4.1.2011.6.128.1.1.3.69.1.37 | ColumnhwGponDeviceAlarmProfileFECUncorrectCodeWordsThreshold | read-write | current | This object indicates the threshold of the code words that were not corrected by the FEC function, range:0~1101600000. 4294967295 is invalid value. |
| 1.3.6.1.4.1.2011.6.128.1.1.3.69.1.38 | ColumnhwGponDeviceAlarmProfileFECCorrectCodeWordsThreshold | read-write | current | This object indicates the threshold of the code words that were corrected by the FEC function, range:0~1101600000. 4294967295 is invalid value. |
| 1.3.6.1.4.1.2011.6.128.1.1.3.69.1.39 | ColumnhwGponDeviceAlarmProfileUpstreamPQDiscardedBytesThreshold | read-write | current | Upstream PQ discarded byte alarm threshold, range:0~65535. If this parameter is set to an invalid value 0, the PQ alarm statistics function is disabled. |
| 1.3.6.1.4.1.2011.6.128.1.1.3.69.1.40 | ColumnhwGponDeviceAlarmProfileDownstreamPQDiscardedBytesThreshold | read-write | current | Downstream PQ discarded byte alarm threshold, range:0~65535. If this parameter is set to an invalid value 0, the PQ alarm statistics function is disabled. |
| 1.3.6.1.4.1.2011.6.128.1.1.3.69.1.50 | ColumnhwGponDeviceAlarmProfileRowStatus | read-create | current | The hwGponDeviceAlarmProfileRowStatus is used to create a new row or to modify or delete an existing row in this table. Options: 1. createAndGo(4) -create a ne… |
| 1.3.6.1.4.1.2011.6.128.1.1.3.69.1.51 | ColumnhwGponDeviceAlarmProfileEncryptionKeyErrorsOfOnuThreshold | read-write | current | Encryption key errors Of Onu Threshold, range:0~100. |
| 1.3.6.1.4.1.2011.6.128.1.1.3.69.1.52 | ColumnhwGponDeviceAlarmProfileXgemKeyErrorsOfOnuThreshold | read-write | current | XGEM key errors Of Onu Threshold, range:0~100. |
| 1.3.6.1.4.1.2011.6.128.1.1.3.69.1.53 | ColumnhwGponDeviceAlarmProfileXgemHecErrorCountOfOnuThreshold | read-write | current | XGEM HEC error count Of Onu Threshold,range:0~100. |
| 1.3.6.1.4.1.2011.6.128.1.1.3.70 | TablehwXponDeviceOpticsDdmAlarmProfileInfoTable | not-accessible | current | This is the XPON optical alarm profile infomation table. The index of this table is hwXponDeviceOpticsModuleAlarmProfileInfoNameIndex. |
| 1.3.6.1.4.1.2011.6.128.1.1.3.70.1 | RowhwXponDeviceOpticsDdmAlarmProfileInfoEntry | not-accessible | current | This is the XPON optical alarm profile infomation table. The index of this entry is hwXponDeviceOpticsModuleAlarmProfileInfoNameIndex. |
| 1.3.6.1.4.1.2011.6.128.1.1.3.70.1.1 | ColumnhwXponDeviceOpticsModuleAlarmProfileInfoNameIndex | not-accessible | current | This object indicates the XPON optical alarm profile name index. |
| 1.3.6.1.4.1.2011.6.128.1.1.3.70.1.2 | ColumnhwXponDeviceOpticsDdmAlarmProfileBindNum | read-only | current | This object indicates the XPON optical alarm profile binding times. |
| 1.3.6.1.4.1.2011.6.128.1.1.3.70.1.3 | ColumnhwXponDeviceOpticsDdmAlarmProfileInfoRowStatus | read-create | current | The hwXponDeviceOpticsDdmAlarmProfileInfoRowStatus is used to create a new row or to modify or delete an existing row in this table. Options: 1. createAndGo(4)… |
| 1.3.6.1.4.1.2011.6.128.1.1.3.70.1.4 | ColumnhwXponDeviceOpticsDdmAlarmProfileTxOpticAlarmUpper | read-write | current | This object indicates the upper alarm threshold of the transmit optical power. |
| 1.3.6.1.4.1.2011.6.128.1.1.3.70.1.5 | ColumnhwXponDeviceOpticsDdmAlarmProfileTxOpticAlarmLower | read-write | current | This object indicates the lower alarm threshold of the transmit optical power. |
| 1.3.6.1.4.1.2011.6.128.1.1.3.70.1.6 | ColumnhwXponDeviceOpticsDdmAlarmProfileTxOpticWarnUpper | read-write | current | This object indicates the upper warning threshold of the transmit optical power. |
| 1.3.6.1.4.1.2011.6.128.1.1.3.70.1.7 | ColumnhwXponDeviceOpticsDdmAlarmProfileTxOpticWarnLower | read-write | current | This object indicates the lower warning threshold of the transmit optical power. |
| 1.3.6.1.4.1.2011.6.128.1.1.3.70.1.8 | ColumnhwXponDeviceOpticsDdmAlarmProfileRxOpticAlarmUpper | read-write | current | This object indicates the upper alarm threshold of the receive optical power. |
| 1.3.6.1.4.1.2011.6.128.1.1.3.70.1.9 | ColumnhwXponDeviceOpticsDdmAlarmProfileRxOpticAlarmLower | read-write | current | This object indicates the lower alarm threshold of the receive optical power. |
| 1.3.6.1.4.1.2011.6.128.1.1.3.70.1.10 | ColumnhwXponDeviceOpticsDdmAlarmProfileRxOpticWarnUpper | read-write | current | This object indicates the upper warning threshold of the receive optical power. |
| 1.3.6.1.4.1.2011.6.128.1.1.3.70.1.11 | ColumnhwXponDeviceOpticsDdmAlarmProfileRxOpticWarnLower | read-write | current | This object indicates the lower warning threshold of the receive optical power. |
| 1.3.6.1.4.1.2011.6.128.1.1.3.70.1.12 | ColumnhwXponDeviceOpticsDdmAlarmProfileBiasCurrentAlarmUpper | read-write | current | This object indicates the upper alarm threshold of the bias current. |
| 1.3.6.1.4.1.2011.6.128.1.1.3.70.1.13 | ColumnhwXponDeviceOpticsDdmAlarmProfileBiasCurrentAlarmLower | read-write | current | This object indicates the lower alarm threshold of the bias current. |
| 1.3.6.1.4.1.2011.6.128.1.1.3.70.1.14 | ColumnhwXponDeviceOpticsDdmAlarmProfileBiasCurrentWarnUpper | read-write | current | This object indicates the upper warning threshold of the bias current. |
| 1.3.6.1.4.1.2011.6.128.1.1.3.70.1.15 | ColumnhwXponDeviceOpticsDdmAlarmProfileBiasCurrentWarnLower | read-write | current | This object indicates the lower warning threshold of the bias current. |
| 1.3.6.1.4.1.2011.6.128.1.1.3.70.1.16 | ColumnhwXponDeviceOpticsDdmAlarmProfileSupplyVoltageAlarmUpper | read-write | current | This object indicates the upper alarm threshold of the voltage. |
| 1.3.6.1.4.1.2011.6.128.1.1.3.70.1.17 | ColumnhwXponDeviceOpticsDdmAlarmProfileSupplyVoltageAlarmLower | read-write | current | This object indicates the lower alarm threshold of the voltage. |
| 1.3.6.1.4.1.2011.6.128.1.1.3.70.1.18 | ColumnhwXponDeviceOpticsDdmAlarmProfileSupplyVoltageWarnUpper | read-write | current | This object indicates the upper warning threshold of the voltage. |
| 1.3.6.1.4.1.2011.6.128.1.1.3.70.1.19 | ColumnhwXponDeviceOpticsDdmAlarmProfileSupplyVoltageWarnLower | read-write | current | This object indicates the lower warning threshold of the voltage. |
| 1.3.6.1.4.1.2011.6.128.1.1.3.70.1.20 | ColumnhwXponDeviceOpticsDdmAlarmProfileTemperatureAlarmUpper | read-write | current | This object indicates the upper alarm threshold of the temperature of the optical transceiver. |
| 1.3.6.1.4.1.2011.6.128.1.1.3.70.1.21 | ColumnhwXponDeviceOpticsDdmAlarmProfileTemperatureAlarmLower | read-write | current | This object indicates the lower alarm threshold of the temperature of the optical transceiver. |
| 1.3.6.1.4.1.2011.6.128.1.1.3.70.1.22 | ColumnhwXponDeviceOpticsDdmAlarmProfileTemperatureWarnUpper | read-write | current | This object indicates the upper warning threshold of the temperature of the optical transceiver. |
| 1.3.6.1.4.1.2011.6.128.1.1.3.70.1.23 | ColumnhwXponDeviceOpticsDdmAlarmProfileTemperatureWarnLower | read-write | current | This object indicates the lower warning threshold of the temperature of the optical transceiver. |
| 1.3.6.1.4.1.2011.6.128.1.1.3.70.1.24 | ColumnhwXponDeviceOpticsDdmAlarmProfile10GTxOpticAlarmUpper | read-write | current | This object indicates the upper alarm threshold of the 10G transmit optical power. |
| 1.3.6.1.4.1.2011.6.128.1.1.3.70.1.25 | ColumnhwXponDeviceOpticsDdmAlarmProfile10GTxOpticAlarmLower | read-write | current | This object indicates the lower alarm threshold of the 10G transmit optical power. |
| 1.3.6.1.4.1.2011.6.128.1.1.3.70.1.26 | ColumnhwXponDeviceOpticsDdmAlarmProfile10GTxOpticWarnUpper | read-write | current | This object indicates the upper warning threshold of the 10G transmit optical power. |
| 1.3.6.1.4.1.2011.6.128.1.1.3.70.1.27 | ColumnhwXponDeviceOpticsDdmAlarmProfile10GTxOpticWarnLower | read-write | current | This object indicates the lower warning threshold of the 10G transmit optical power. |
| 1.3.6.1.4.1.2011.6.128.1.1.3.70.1.28 | ColumnhwXponDeviceOpticsDdmAlarmProfile10GBiasCurrentAlarmUpper | read-write | current | This object indicates the upper alarm threshold of the 10G bias current. |
| 1.3.6.1.4.1.2011.6.128.1.1.3.70.1.29 | ColumnhwXponDeviceOpticsDdmAlarmProfile10GBiasCurrentAlarmLower | read-write | current | This object indicates the lower alarm threshold of the 10G bias current. |
| 1.3.6.1.4.1.2011.6.128.1.1.3.70.1.30 | ColumnhwXponDeviceOpticsDdmAlarmProfile10GBiasCurrentWarnUpper | read-write | current | This object indicates the upper warning threshold of the 10G bias current. |
| 1.3.6.1.4.1.2011.6.128.1.1.3.70.1.31 | ColumnhwXponDeviceOpticsDdmAlarmProfile10GBiasCurrentWarnLower | read-write | current | This object indicates the lower warning threshold of the 10G bias current. |
| 1.3.6.1.4.1.2011.6.128.1.1.3.70.1.32 | ColumnhwXponDeviceOpticsDdmAlarmProfileOntCatvRxOpticAlarmUpper | read-write | current | This object indicates the upper alarm threshold of the ONT CATV receive optical power. |
| 1.3.6.1.4.1.2011.6.128.1.1.3.70.1.33 | ColumnhwXponDeviceOpticsDdmAlarmProfileOntCatvRxOpticAlarmLower | read-write | current | This object indicates the lower alarm threshold of the ONT CATV receive optical power. |
| 1.3.6.1.4.1.2011.6.128.1.1.3.71 | TablehwXponDeviceLineProfEthPortBundleCfgTable | not-accessible | current | This is the XPON line profile PORT-BUNDLE config table. The index of this table is a combination of hwXponDeviceLineProfEthPortBundleCfgLineProfNameIndex, and … |
| 1.3.6.1.4.1.2011.6.128.1.1.3.71.1 | RowhwXponDeviceLineProfEthPortBundleCfgEntry | not-accessible | current | This is the XPON line profile PORT-BUNDLE config table. The index of this entry is a combination of hwXponDeviceLineProfEthPortBundleCfgLineProfNameIndex, and … |
| 1.3.6.1.4.1.2011.6.128.1.1.3.71.1.1 | ColumnhwXponDeviceLineProfEthPortBundleCfgLineProfNameIndex | not-accessible | current | This object indicates the XPON line profile name index. |
| 1.3.6.1.4.1.2011.6.128.1.1.3.71.1.2 | ColumnhwXponDeviceLineProfEthPortBundleCfgGroupIndex | not-accessible | current | This object indicates the XPON line profile PORT-BUNDLE config bundle gproup index. |
| 1.3.6.1.4.1.2011.6.128.1.1.3.71.1.3 | ColumnhwXponDeviceLineProfEthPortBundleCfgPortBitMap | read-write | current | This object indicates the XPON line profile PORT-BUNDLE config bundle port bitmap, support 32 ports, and the lowest bit indicates the port 1. |
| 1.3.6.1.4.1.2011.6.128.1.1.3.71.1.4 | ColumnhwXponDeviceLineProfEthPortBundleCfgRowStatus | read-create | current | The hwXponDeviceLineProfEthPortBundleCfgRowStatus is used to create a new row or to modify or delete an existing row in this table. Options: 1. createAndGo(4) … |
| 1.3.6.1.4.1.2011.6.128.1.1.3.72 | TablehwXponDeviceSLAProfileInfoTable | not-accessible | current | This is the XPON SLA profile infomation table. The index of this table is hwXponDeviceSLAProfileInfoNameIndex. |
| 1.3.6.1.4.1.2011.6.128.1.1.3.72.1 | RowhwXponDeviceSLAProfileInfoEntry | not-accessible | current | This is the XPON SLA profile infomation table. The index of this entry is hwXponDeviceSLAProfileInfoNameIndex. |
| 1.3.6.1.4.1.2011.6.128.1.1.3.72.1.1 | ColumnhwXponDeviceSLAProfileInfoNameIndex | not-accessible | current | This object indicates the name of the SLA profile. |
| 1.3.6.1.4.1.2011.6.128.1.1.3.72.1.2 | ColumnhwXponDeviceSLAProfileCycleLength | read-write | current | This object indicates the cycle length. |
| 1.3.6.1.4.1.2011.6.128.1.1.3.72.1.3 | ColumnhwXponDeviceSLAProfileServiceNum | read-write | current | This object indicates the service number. |
| 1.3.6.1.4.1.2011.6.128.1.1.3.72.1.4 | ColumnhwXponDeviceSLAProfileFixedPacketSize1 | read-write | current | This object indicates the fixed packet size of service 1. The value(0) indicates that there is no restriction of packet size. The value(-1) is invalid value. |
| 1.3.6.1.4.1.2011.6.128.1.1.3.72.1.5 | ColumnhwXponDeviceSLAProfileFixedBandwidth1 | read-write | current | This object indicates the fixed bandwidth of service 1. The value(-1) is invalid value. |
| 1.3.6.1.4.1.2011.6.128.1.1.3.72.1.6 | ColumnhwXponDeviceSLAProfileAssuredBandwidth1 | read-write | current | This object indicates the assure bandwidth of service 1. The value(-1) is invalid value. |
| 1.3.6.1.4.1.2011.6.128.1.1.3.72.1.7 | ColumnhwXponDeviceSLAProfileBestEffortBandwidth1 | read-write | current | This object indicates the best effort bandwidth of service 1. The value(-1) is invalid value. |
| 1.3.6.1.4.1.2011.6.128.1.1.3.72.1.8 | ColumnhwXponDeviceSLAProfileWrrWeight1 | read-write | current | This object indicates the WRR weight of Service 1. The value(-1) is invalid value. |
| 1.3.6.1.4.1.2011.6.128.1.1.3.72.1.9 | ColumnhwXponDeviceSLAProfileFixedPacketSize2 | read-write | current | This object indicates the fixed packet size of service 2. The value(0) indicates that there is no restriction of packet size. The value(-1) is invalid value. |
| 1.3.6.1.4.1.2011.6.128.1.1.3.72.1.10 | ColumnhwXponDeviceSLAProfileFixedBandwidth2 | read-write | current | This object indicates the fixed bandwidth of service 2. The value(-1) is invalid value. |
| 1.3.6.1.4.1.2011.6.128.1.1.3.72.1.11 | ColumnhwXponDeviceSLAProfileAssuredBandwidth2 | read-write | current | This object indicates the assure bandwidth of service 2. The value(-1) is invalid value. |
| 1.3.6.1.4.1.2011.6.128.1.1.3.72.1.12 | ColumnhwXponDeviceSLAProfileBestEffortBandwidth2 | read-write | current | This object indicates the best effort bandwidth of service 2. The value(-1) is invalid value. |
| 1.3.6.1.4.1.2011.6.128.1.1.3.72.1.13 | ColumnhwXponDeviceSLAProfileWrrWeight2 | read-write | current | This object indicates the WRR weight of service 2. The value(-1) is invalid value. |
| 1.3.6.1.4.1.2011.6.128.1.1.3.72.1.14 | ColumnhwXponDeviceSLAProfileFixedPacketSize3 | read-write | current | This object indicates the fixed packet size of service 3. The value(0) indicates that there is no restriction of packet size. The value(-1) is invalid value. |
| 1.3.6.1.4.1.2011.6.128.1.1.3.72.1.15 | ColumnhwXponDeviceSLAProfileFixedBandwidth3 | read-write | current | This object indicates the fixed bandwidth of service 3. The value(-1) is invalid value. |
| 1.3.6.1.4.1.2011.6.128.1.1.3.72.1.16 | ColumnhwXponDeviceSLAProfileAssuredBandwidth3 | read-write | current | This object indicates the assure bandwidth of service 3. The value(-1) is invalid value. |
| 1.3.6.1.4.1.2011.6.128.1.1.3.72.1.17 | ColumnhwXponDeviceSLAProfileBestEffortBandwidth3 | read-write | current | This object indicates the best effort bandwidth of Service 3. The value(-1) is invalid value. |
| 1.3.6.1.4.1.2011.6.128.1.1.3.72.1.18 | ColumnhwXponDeviceSLAProfileWrrWeight3 | read-write | current | This object indicates the WRR weight of service 3. The value(-1) is invalid value. |
| 1.3.6.1.4.1.2011.6.128.1.1.3.72.1.19 | ColumnhwXponDeviceSLAProfileFixedPacketSize4 | read-write | current | This object indicates the fixed packet size of service 4. The value(0) indicates that there is no restriction of packet size. The value(-1) is invalid value. |
| 1.3.6.1.4.1.2011.6.128.1.1.3.72.1.20 | ColumnhwXponDeviceSLAProfileFixedBandwidth4 | read-write | current | This object indicates the fixed bandwidth of service 4. The value(-1) is invalid value. |
| 1.3.6.1.4.1.2011.6.128.1.1.3.72.1.21 | ColumnhwXponDeviceSLAProfileAssuredBandwidth4 | read-write | current | This object indicates the assure bandwidth of service 4. The value(-1) is invalid value. |
| 1.3.6.1.4.1.2011.6.128.1.1.3.72.1.22 | ColumnhwXponDeviceSLAProfileBestEffortBandwidth4 | read-write | current | This object indicates the best effort bandwidth of service 4. The value(-1) is invalid value. |
| 1.3.6.1.4.1.2011.6.128.1.1.3.72.1.23 | ColumnhwXponDeviceSLAProfileWrrWeight4 | read-write | current | This object indicates the WRR weight of service 4. The value(-1) is invalid value. |
| 1.3.6.1.4.1.2011.6.128.1.1.3.72.1.24 | ColumnhwXponDeviceSLAProfileFixedPacketSize5 | read-write | current | This object indicates the fixed packet size of service 5. The value(0) indicates that there is no restriction of packet size. The value(-1) is invalid value. |
| 1.3.6.1.4.1.2011.6.128.1.1.3.72.1.25 | ColumnhwXponDeviceSLAProfileFixedBandwidth5 | read-write | current | This object indicates the Fixed Bandwidth of service 5. The value(-1) is invalid value. |
| 1.3.6.1.4.1.2011.6.128.1.1.3.72.1.26 | ColumnhwXponDeviceSLAProfileAssuredBandwidth5 | read-write | current | This object indicates the assure bandwidth of service 5. The value(-1) is invalid value. |
| 1.3.6.1.4.1.2011.6.128.1.1.3.72.1.27 | ColumnhwXponDeviceSLAProfileBestEffortBandwidth5 | read-write | current | This object indicates the best effort bandwidth of service 5. The value(-1) is invalid value. |
| 1.3.6.1.4.1.2011.6.128.1.1.3.72.1.28 | ColumnhwXponDeviceSLAProfileWrrWeight5 | read-write | current | This object indicates the WRR weight of service 5. The value(-1) is invalid value. |
| 1.3.6.1.4.1.2011.6.128.1.1.3.72.1.29 | ColumnhwXponDeviceSLAProfileFixedPacketSize6 | read-write | current | This object indicates the fixed packet size of service 6. The value(0) indicates that there is no restriction of packet size. The value(-1) is invalid value. |
| 1.3.6.1.4.1.2011.6.128.1.1.3.72.1.30 | ColumnhwXponDeviceSLAProfileFixedBandwidth6 | read-write | current | This object indicates the fixed bandwidth of service 6. The value(-1) is invalid value. |
| 1.3.6.1.4.1.2011.6.128.1.1.3.72.1.31 | ColumnhwXponDeviceSLAProfileAssuredBandwidth6 | read-write | current | This object indicates the assure bandwidth of service 6. The value(-1) is invalid value. |
| 1.3.6.1.4.1.2011.6.128.1.1.3.72.1.32 | ColumnhwXponDeviceSLAProfileBestEffortBandwidth6 | read-write | current | This object indicates the best effort bandwidth of service 6. The value(-1) is invalid value. |
| 1.3.6.1.4.1.2011.6.128.1.1.3.72.1.33 | ColumnhwXponDeviceSLAProfileWrrWeight6 | read-write | current | This object indicates the WRR weight of service 6. The value(-1) is invalid value. |
| 1.3.6.1.4.1.2011.6.128.1.1.3.72.1.34 | ColumnhwXponDeviceSLAProfileFixedPacketSize7 | read-write | current | This object indicates the fixed packet size of service 7. The value(0) indicates that there is no restriction of packet size. The value(-1) is invalid value. |
| 1.3.6.1.4.1.2011.6.128.1.1.3.72.1.35 | ColumnhwXponDeviceSLAProfileFixedBandwidth7 | read-write | current | This object indicates the fixed bandwidth of service 7. The value(-1) is invalid value. |
| 1.3.6.1.4.1.2011.6.128.1.1.3.72.1.36 | ColumnhwXponDeviceSLAProfileAssuredBandwidth7 | read-write | current | This object indicates the assure bandwidth of service 7. The value(-1) is invalid value. |
| 1.3.6.1.4.1.2011.6.128.1.1.3.72.1.37 | ColumnhwXponDeviceSLAProfileBestEffortBandwidth7 | read-write | current | This object indicates the best effort bandwidth of service 7. The value(-1) is invalid value. |
| 1.3.6.1.4.1.2011.6.128.1.1.3.72.1.38 | ColumnhwXponDeviceSLAProfileWrrWeight7 | read-write | current | This object indicates the WRR weight of service 7. The value(-1) is invalid value. |
| 1.3.6.1.4.1.2011.6.128.1.1.3.72.1.39 | ColumnhwXponDeviceSLAProfileFixedPacketSize8 | read-write | current | This object indicates the fixed packet size of service 8. The value(0) indicates that there is no restriction of packet size. The value(-1) is invalid value. |
| 1.3.6.1.4.1.2011.6.128.1.1.3.72.1.40 | ColumnhwXponDeviceSLAProfileFixedBandwidth8 | read-write | current | This object indicates the fixed bandwidth of service 8. The value(-1) is invalid value. |
| 1.3.6.1.4.1.2011.6.128.1.1.3.72.1.41 | ColumnhwXponDeviceSLAProfileAssuredBandwidth8 | read-write | current | This object indicates the assure bandwidth of service 8. The value(-1) is invalid value. |
| 1.3.6.1.4.1.2011.6.128.1.1.3.72.1.42 | ColumnhwXponDeviceSLAProfileBestEffortBandwidth8 | read-write | current | This object indicates the best effort bandwidth of service 8. The value(-1) is invalid value. |
| 1.3.6.1.4.1.2011.6.128.1.1.3.72.1.43 | ColumnhwXponDeviceSLAProfileWrrWeight8 | read-write | current | This object indicates the WRR weight of service 8. The value(-1) is invalid value. |
| 1.3.6.1.4.1.2011.6.128.1.1.3.72.1.44 | ColumnhwXponDeviceSLAProfileEntryStatus | read-create | current | The hwXponDeviceSLAProfileEntryStatus is used to create a new row or to modify or delete an existing row in this table. Options: 1. createAndGo(4) -create a ne… |
| 1.3.6.1.4.1.2011.6.128.1.1.3.73 | TablehwGponDeviceSrvProfileOntUpIgmpMsgCfgTable | not-accessible | current | This table is used to set and query the user-VLAN-based IGMP packet forwarding mode of ONT. The indexes of this table are hwGponDeviceSrvProfileOntIgmpCfgNameI… |
| 1.3.6.1.4.1.2011.6.128.1.1.3.73.1 | RowhwGponDeviceSrvProfileOntUpIgmpMsgCfgEntry | not-accessible | current | This table is used to set and query the user-VLAN-based IGMP packet forwarding mode of ONT. The indexes of this entry are hwGponDeviceSrvProfileOntIgmpCfgNameI… |
| 1.3.6.1.4.1.2011.6.128.1.1.3.73.1.1 | ColumnhwGponDeviceSrvProfileOntIgmpCfgNameIndex | not-accessible | current | This object indicates the XPON service profile name index. |
| 1.3.6.1.4.1.2011.6.128.1.1.3.73.1.2 | ColumnhwGponDeviceSrvProfileOntUpIgmpMsgUserVlan | not-accessible | current | This object indicates the user VLAN of upstream IGMP packets. 0..4095 indicates the user VLAN. |
| 1.3.6.1.4.1.2011.6.128.1.1.3.73.1.3 | ColumnhwGponDeviceSrvProfileOntUpIgmpTransmitMode | read-write | current | This object indicates the IGMP packet forwarding mode. Only the value transparent(1) is supported currently. Options: 1. transparent(1) - Indicates that the IG… |
| 1.3.6.1.4.1.2011.6.128.1.1.3.73.1.4 | ColumnhwGponDeviceSrvProfileOntUpIgmpMsgTranslationVlan | read-write | current | This object indicates the ont upstream IGMP packets will be translate to the translation vlan. |
| 1.3.6.1.4.1.2011.6.128.1.1.3.73.1.5 | ColumnhwGponDeviceSrvProfileOntUpIgmpMsgPriority | read-write | current | When upstream IGMP packets were added a vlan or translated to the translation vlan, priority was set. |
| 1.3.6.1.4.1.2011.6.128.1.1.3.73.1.6 | ColumnhwGponDeviceSrvProfileOntUpIgmpMsgCfgRowStatus | read-create | current | Row status. This object is used to differentiate the creation, modification and deletion operations for an object. Options: 1. createAndGo(4) -create a new ins… |
| 1.3.6.1.4.1.2011.6.128.1.1.3.148 | TablehwGponDeviceLineProfMulticastGemCfgTable | not-accessible | current | This is the XPON line profile multicast gemport config table. The index of this table is hwGponDeviceLineProfileInfoNameIndex. |
| 1.3.6.1.4.1.2011.6.128.1.1.3.148.1 | RowhwGponDeviceLineProfMulticastGemCfgEntry | not-accessible | current | This is the XPON line profile multicast gemport config table. The index of this entry is hwGponDeviceLineProfileInfoNameIndex. |
| 1.3.6.1.4.1.2011.6.128.1.1.3.148.1.1 | ColumnhwGponDeviceLineProfMulticastGemCfgTcontIndex | read-write | current | This object indicates the XPON line profile T-CONT index. The issued value (-1) of T-CONT index indicates that the multicast gemport is not specified to any tc… |
| 1.3.6.1.4.1.2011.6.128.1.1.3.148.1.2 | ColumnhwGponDeviceLineProfMulticastGemCfgOntPhyType | read-write | current | This object indicates the port type of the ONT. Options: 1. eth(47) - ETH 2. ethBundle(254) - EthBundle 3. invalid(-1) - Indicates that the query fails or no i… |
| 1.3.6.1.4.1.2011.6.128.1.1.3.148.1.3 | ColumnhwGponDeviceLineProfMulticastGemCfgOntPhyIndex | read-write | current | This object indicates the port index of the ONT, or the bundle-groupid when it is the eth-bundle port type. |
| 1.3.6.1.4.1.2011.6.128.1.1.4 | NodehwXponDeviceStatisticObjects | |||
| 1.3.6.1.4.1.2011.6.128.1.1.4.21 | TablehwGponOltEthernetStatisticTable | not-accessible | current | The GPON port ether statistics table. The index of this table is ifIndex. |
| 1.3.6.1.4.1.2011.6.128.1.1.4.21.1 | RowhwGponOltEthernetStatisticEntry | not-accessible | current | The GPON port ether statistics table. The index of this entry is ifIndex. |
| 1.3.6.1.4.1.2011.6.128.1.1.4.21.1.1 | ColumnhwGponOltEthernetStatisticReceivedPakts | read-only | current | This object indicates the received frames. |
| 1.3.6.1.4.1.2011.6.128.1.1.4.21.1.2 | ColumnhwGponOltEthernetStatisticSendPakts | read-only | current | This object indicates the sent frames. |
| 1.3.6.1.4.1.2011.6.128.1.1.4.21.1.3 | ColumnhwGponOltEthernetStatisticDropPakts | read-only | current | This object indicates the number of Ethernet frames, including oversized frames, undersized frames, and CRC failures. |
| 1.3.6.1.4.1.2011.6.128.1.1.4.21.1.4 | ColumnhwGponOltEthernetStatisticReceivedTotalPakts | read-only | current | This object indicates the received GEM frames. |
| 1.3.6.1.4.1.2011.6.128.1.1.4.21.1.5 | ColumnhwGponOltEthernetStatisticReceivedBroadcastPakts | read-only | current | This object indicates the received broadcast frames. |
| 1.3.6.1.4.1.2011.6.128.1.1.4.21.1.6 | ColumnhwGponOltEthernetStatisticReceivedMulticastPakts | read-only | current | This object indicates the received multicast frames. |
| 1.3.6.1.4.1.2011.6.128.1.1.4.21.1.7 | ColumnhwGponOltEthernetStatisticReceivedUnicastPakts | read-only | current | This object indicates the received unicast frames. |
| 1.3.6.1.4.1.2011.6.128.1.1.4.21.1.8 | ColumnhwGponOltEthernetStatisticReceivedLen64Bytes | read-only | current | This object indicates the received 64-octet frames. |
| 1.3.6.1.4.1.2011.6.128.1.1.4.21.1.9 | ColumnhwGponOltEthernetStatisticReceivedLen65To127Bytes | read-only | current | This object indicates the received 65~127-octet frames. |
| 1.3.6.1.4.1.2011.6.128.1.1.4.21.1.10 | ColumnhwGponOltEthernetStatisticReceivedLen128To255Bytes | read-only | current | This object indicates the received 128~255-octet frames. |
| 1.3.6.1.4.1.2011.6.128.1.1.4.21.1.11 | ColumnhwGponOltEthernetStatisticReceivedLen256To511Bytes | read-only | current | This object indicates the received 256~511-octet frames. |
| 1.3.6.1.4.1.2011.6.128.1.1.4.21.1.12 | ColumnhwGponOltEthernetStatisticReceivedLen512To1023Bytes | read-only | current | This object indicates the received 512~1023-octet frames. |
| 1.3.6.1.4.1.2011.6.128.1.1.4.21.1.13 | ColumnhwGponOltEthernetStatisticReceivedLen1024To1518Bytes | read-only | current | This object indicates the received 1024~1518-octet frames. |
| 1.3.6.1.4.1.2011.6.128.1.1.4.21.1.14 | ColumnhwGponOltEthernetStatisticReceivedLenMore1518Bytes | read-only | current | This object indicates the received over 1518-octet frames. |
| 1.3.6.1.4.1.2011.6.128.1.1.4.21.1.15 | ColumnhwGponOltEthernetStatisticReceivedBytes | read-only | current | This object indicates the received octets. |
| 1.3.6.1.4.1.2011.6.128.1.1.4.21.1.16 | ColumnhwGponOltEthernetStatisticReceivedTooLongPakts | read-only | current | This object indicates the received oversize frames. |
| 1.3.6.1.4.1.2011.6.128.1.1.4.21.1.17 | ColumnhwGponOltEthernetStatisticReceivedTooShortPakts | read-only | current | This object indicates the received undersize frames. |
| 1.3.6.1.4.1.2011.6.128.1.1.4.21.1.18 | ColumnhwGponOltEthernetStatisticReceivedCRCErrPakts | read-only | current | This object indicates the received error frames. |
| 1.3.6.1.4.1.2011.6.128.1.1.4.21.1.19 | ColumnhwGponOltEthernetStatisticSendTotalPakts | read-only | current | This object indicates the send GEM frames. |
| 1.3.6.1.4.1.2011.6.128.1.1.4.21.1.20 | ColumnhwGponOltEthernetStatisticSendBroadcastPakts | read-only | current | This object indicates the send broadcast frames. |
| 1.3.6.1.4.1.2011.6.128.1.1.4.21.1.21 | ColumnhwGponOltEthernetStatisticSendMulticastPakts | read-only | current | This object indicates the send multicast frames. |
| 1.3.6.1.4.1.2011.6.128.1.1.4.21.1.22 | ColumnhwGponOltEthernetStatisticSendUnicastPakts | read-only | current | This object indicates the send unicast frames. |
| 1.3.6.1.4.1.2011.6.128.1.1.4.21.1.23 | ColumnhwGponOltEthernetStatisticSendLen64Bytes | read-only | current | This object indicates the sent 64-octet frames. |
| 1.3.6.1.4.1.2011.6.128.1.1.4.21.1.24 | ColumnhwGponOltEthernetStatisticSendLen65To127Bytes | read-only | current | This object indicates the sent 65~127-octet frames. |
| 1.3.6.1.4.1.2011.6.128.1.1.4.21.1.25 | ColumnhwGponOltEthernetStatisticSendLen128To255Bytes | read-only | current | This object indicates the sent 128~255-octet frames. |
| 1.3.6.1.4.1.2011.6.128.1.1.4.21.1.26 | ColumnhwGponOltEthernetStatisticSendLen256To511Bytes | read-only | current | This object indicates the sent 256~511-octet frames. |
| 1.3.6.1.4.1.2011.6.128.1.1.4.21.1.27 | ColumnhwGponOltEthernetStatisticSendLen512To1023Bytes | read-only | current | This object indicates the sent 512~1023-octet frames. |
| 1.3.6.1.4.1.2011.6.128.1.1.4.21.1.28 | ColumnhwGponOltEthernetStatisticSendLen1024To1518Bytes | read-only | current | This object indicates the sent 1024~1518-octet frames. |
| 1.3.6.1.4.1.2011.6.128.1.1.4.21.1.29 | ColumnhwGponOltEthernetStatisticSendLenMore1518Bytes | read-only | current | This object indicates the sent over 1518-octet frames. |
| 1.3.6.1.4.1.2011.6.128.1.1.4.21.1.30 | ColumnhwGponOltEthernetStatisticSendBytes | read-only | current | This object indicates the sent octets. |
| 1.3.6.1.4.1.2011.6.128.1.1.4.21.1.31 | ColumnhwGponOltEthernetStatisticSendMulticastBytes | read-only | current | This object indicates the sent multicast bytes. |
| 1.3.6.1.4.1.2011.6.128.1.1.4.21.1.32 | ColumnhwGponOltEtherStatisticSendBufferOverflowDropPakts | read-only | current | This object indicates the sent overflow drop frames. |
| 1.3.6.1.4.1.2011.6.128.1.1.4.21.1.50 | ColumnhwGponOltEthernetStatisticClear | read-write | current | This object is used to clear the statistics. Options: 1. clear(1) - Indicates that clear the statistics 2. invalid(-1) - Indicates that the query fails or no i… |
| 1.3.6.1.4.1.2011.6.128.1.1.4.22 | TablehwGponOltGemStatisticTable | not-accessible | current | The GPON port GEM frame statistics table. The index of this table is ifIndex. |
| 1.3.6.1.4.1.2011.6.128.1.1.4.22.1 | RowhwGponOltGemStatisticEntry | not-accessible | current | The GPON port GEM frame statistics table. The index of this entry is ifIndex. |
| 1.3.6.1.4.1.2011.6.128.1.1.4.22.1.1 | ColumnhwGponOltGemStatisticReceivedFrames | read-only | current | This object indicates the received GEM frames. |
| 1.3.6.1.4.1.2011.6.128.1.1.4.22.1.2 | ColumnhwGponOltGemStatisticReceivedOMCIPackts | read-only | current | This object indicates the recived OMCI frames. |
| 1.3.6.1.4.1.2011.6.128.1.1.4.22.1.3 | ColumnhwGponOltGemStatisticReceivedPLOAMPackts | read-only | current | This object indicates the recived PLOAM frames. |
| 1.3.6.1.4.1.2011.6.128.1.1.4.22.1.4 | ColumnhwGponOltGemStatisticReceivedIdlePackts | read-only | current | This object indicates the recived IDLE frames. |
| 1.3.6.1.4.1.2011.6.128.1.1.4.22.1.5 | ColumnhwGponOltGemStatisticSendFrames | read-only | current | This object indicates the sent GEM frames. |
| 1.3.6.1.4.1.2011.6.128.1.1.4.22.1.6 | ColumnhwGponOltGemStatisticSendOMCIPackts | read-only | current | This object indicates the sent OMCI frames. |
| 1.3.6.1.4.1.2011.6.128.1.1.4.22.1.7 | ColumnhwGponOltGemStatisticSendPLOAMPackts | read-only | current | This object indicates the sent PLOAM frames. |
| 1.3.6.1.4.1.2011.6.128.1.1.4.22.1.8 | ColumnhwGponOltGemStatisticSendIdlePackts | read-only | current | This object indicates the sent IDLE frames. |
| 1.3.6.1.4.1.2011.6.128.1.1.4.22.1.30 | ColumnhwGponOltGemStatisticClear | read-write | current | This object is used to clear the statistics. Options: 1. clear(1) - Indicates that clear the statistics 2. invalid(-1) - Indicates that the query fails or no i… |
| 1.3.6.1.4.1.2011.6.128.1.1.4.23 | TablehwGponOntStatisticTable | not-accessible | current | The ONT statistics table. This table is used in xpon profile mode. The index of this table is a combination of ifIndex and hwGponDeviceOntIndex. |
| 1.3.6.1.4.1.2011.6.128.1.1.4.23.1 | RowhwGponOntStatisticEntry | not-accessible | current | The ONT statistics table. This table is used in xpon profile mode. The index of this entry is a combination of ifIndex and hwGponDeviceOntIndex. |
| 1.3.6.1.4.1.2011.6.128.1.1.4.23.1.1 | ColumnhwGponOntStatisticUpPackts | read-only | current | This object indicates the upstream frames. |
| 1.3.6.1.4.1.2011.6.128.1.1.4.23.1.2 | ColumnhwGponOntStatisticDownPackts | read-only | current | This object indicates the downstream frames. |
| 1.3.6.1.4.1.2011.6.128.1.1.4.23.1.3 | ColumnhwGponOntStatisticUpBytes | read-only | current | This object indicates the upstream bytes. |
| 1.3.6.1.4.1.2011.6.128.1.1.4.23.1.4 | ColumnhwGponOntStatisticDownBytes | read-only | current | This object indicates the downstream bytes. |
| 1.3.6.1.4.1.2011.6.128.1.1.4.23.1.5 | ColumnhwGponOntStatisticUpDropPackts | read-only | current | This object indicates the number of upstream discarded frames. |
| 1.3.6.1.4.1.2011.6.128.1.1.4.23.1.6 | ColumnhwGponOntStatisticDownDropPackts | read-only | current | This object indicates the number of downstream discarded frames. |
| 1.3.6.1.4.1.2011.6.128.1.1.4.23.1.20 | ColumnhwGponOntStatisticClear | read-write | current | This object is used to clear the statistics. Options: 1. clear(1) - Indicates that clear the statistics 2. invalid(-1) - Indicates that the query fails or no i… |
| 1.3.6.1.4.1.2011.6.128.1.1.4.24 | TablehwGponOltGemIndexStatisticTable | not-accessible | current | The GEM Port statistics table. The index of this table is a combination of ifIndex, hwGponDeviceOntIndex and hwGponDeviceGemIndexObjectIndex. |
| 1.3.6.1.4.1.2011.6.128.1.1.4.24.1 | RowhwGponOltGemIndexStatisticEntry | not-accessible | current | The GEM Port statistics table. The index of this entry is a combination of ifIndex, hwGponDeviceOntIndex and hwGponDeviceGemIndexObjectIndex. |
| 1.3.6.1.4.1.2011.6.128.1.1.4.24.1.1 | ColumnhwGponDeviceGemIndexObjectIndex | not-accessible | current | This object indicates the GEM Index. |
| 1.3.6.1.4.1.2011.6.128.1.1.4.24.1.2 | ColumnhwGponOltGemIndexStatisticUpFrames | read-only | current | This object indicates the upstream frames. |
| 1.3.6.1.4.1.2011.6.128.1.1.4.24.1.3 | ColumnhwGponOltGemIndexStatisticDownFrames | read-only | current | This object indicates the downstream frames. |
| 1.3.6.1.4.1.2011.6.128.1.1.4.24.1.4 | ColumnhwGponOltGemIndexStatisticUpBytes | read-only | current | This object indicates the upstream bytes. |
| 1.3.6.1.4.1.2011.6.128.1.1.4.24.1.5 | ColumnhwGponOltGemIndexStatisticDownBytes | read-only | current | This object indicates the downstream bytes. |
| 1.3.6.1.4.1.2011.6.128.1.1.4.24.1.6 | ColumnhwGponOltGemIndexStatisticUpDropFrames | read-only | current | This object indicates the number of upstream discarded frames. |
| 1.3.6.1.4.1.2011.6.128.1.1.4.24.1.7 | ColumnhwGponOltGemIndexStatisticDownDropFrames | read-only | current | This object indicates the number of downstream discarded frames. |
| 1.3.6.1.4.1.2011.6.128.1.1.4.24.1.20 | ColumnhwGponOltGemIndexStatisticClear | read-write | current | This object is used to clear the statistics. Options: 1. clear(1) - Indicates that clear the statistics 2. invalid(-1) - Indicates that the query fails or no i… |
| 1.3.6.1.4.1.2011.6.128.1.1.4.25 | TablehwGponOntEthernetStatisticTable | not-accessible | current | The ONT ETH port statistics table. The index of this table is a combination of ifIndex, hwGponDeviceOntIndex and hwGponDeviceOntEthernetPortId. |
| 1.3.6.1.4.1.2011.6.128.1.1.4.25.1 | RowhwGponOntEthernetStatisticEntry | not-accessible | current | The ONT ETH port statistics table. The index of this entry is a combination of ifIndex, hwGponDeviceOntIndex and hwGponDeviceOntEthernetPortId. |
| 1.3.6.1.4.1.2011.6.128.1.1.4.25.1.1 | ColumnhwGponOntEthernetStatisticDataSource | read-only | current | This object indicates the ONT ETH statistics data source. |
| 1.3.6.1.4.1.2011.6.128.1.1.4.25.1.2 | ColumnhwGponOntEthernetStatisticRecvDropEvents | read-only | current | This object indicates the number of received and discarded frames. |
| 1.3.6.1.4.1.2011.6.128.1.1.4.25.1.3 | ColumnhwGponOntEthernetStatisticRecvOctets | read-only | current | This object indicates the received bytes. |
| 1.3.6.1.4.1.2011.6.128.1.1.4.25.1.4 | ColumnhwGponOntEthernetStatisticRecvPkts | read-only | current | This object indicates the received frames. |
| 1.3.6.1.4.1.2011.6.128.1.1.4.25.1.5 | ColumnhwGponOntEthernetStatisticRecvBroadcastPkts | read-only | current | This object indicates the received broadcast frames. |
| 1.3.6.1.4.1.2011.6.128.1.1.4.25.1.6 | ColumnhwGponOntEthernetStatisticRecvMulticastPkts | read-only | current | This object indicates the received multicast frames. |
| 1.3.6.1.4.1.2011.6.128.1.1.4.25.1.7 | ColumnhwGponOntEthernetStatisticRecvCRCAlignErrors | read-only | current | This object indicates the received CRC error frames. |
| 1.3.6.1.4.1.2011.6.128.1.1.4.25.1.8 | ColumnhwGponOntEthernetStatisticRecvUndersizePkts | read-only | current | This object indicates the received undersize frames. |
| 1.3.6.1.4.1.2011.6.128.1.1.4.25.1.9 | ColumnhwGponOntEthernetStatisticMTUExceededDiscardFrames | read-only | current | This object indicates the send MTU exceeded discard frames. |
| 1.3.6.1.4.1.2011.6.128.1.1.4.25.1.10 | ColumnhwGponOntEthernetStatisticRecvFragments | read-only | current | This object indicates the number of received fragments. |
| 1.3.6.1.4.1.2011.6.128.1.1.4.25.1.11 | ColumnhwGponOntEthernetStatisticRecvJabbers | read-only | current | This object indicates the received Jabber error frames. |
| 1.3.6.1.4.1.2011.6.128.1.1.4.25.1.12 | ColumnhwGponOntEthernetStatisticCollisions | read-only | current | This object indicates the count of collisions. |
| 1.3.6.1.4.1.2011.6.128.1.1.4.25.1.13 | ColumnhwGponOntEthernetStatisticRecvPkts64Octets | read-only | current | This object indicates the received 64-octet frames |
| 1.3.6.1.4.1.2011.6.128.1.1.4.25.1.14 | ColumnhwGponOntEthernetStatisticRecvPkts65to127Octets | read-only | current | This object indicates the received 65~127-octet frames |
| 1.3.6.1.4.1.2011.6.128.1.1.4.25.1.15 | ColumnhwGponOntEthernetStatisticRecvPkts128to255Octets | read-only | current | This object indicates the received 128~255-octet frames |
| 1.3.6.1.4.1.2011.6.128.1.1.4.25.1.16 | ColumnhwGponOntEthernetStatisticRecvPkts256to511Octets | read-only | current | This object indicates the received 256~511-octet frames. |
| 1.3.6.1.4.1.2011.6.128.1.1.4.25.1.17 | ColumnhwGponOntEthernetStatisticRecvPkts512to1023Octets | read-only | current | This object indicates the received 512~1023-octet frames. |
| 1.3.6.1.4.1.2011.6.128.1.1.4.25.1.18 | ColumnhwGponOntEthernetStatisticRecvPkts1024to1518Octets | read-only | current | This object indicates the received 1024~1518-octet frames. |
| 1.3.6.1.4.1.2011.6.128.1.1.4.25.1.19 | ColumnhwGponOntEthernetStatisticRecvFCSErrors | read-only | current | This object indicates the received FCS error frames. |
| 1.3.6.1.4.1.2011.6.128.1.1.4.25.1.20 | ColumnhwGponOntEthernetStatisticSendExcessiveCollision | read-only | current | This object indicates the sent excessive collision frames. |
| 1.3.6.1.4.1.2011.6.128.1.1.4.25.1.21 | ColumnhwGponOntEthernetStatisticSendLateCollision | read-only | current | This object indicates the sent late collision frames. |
| 1.3.6.1.4.1.2011.6.128.1.1.4.25.1.22 | ColumnhwGponOntEthernetStatisticRecvFrameTooLongs | read-only | current | This object indicates the received oversize frames. |
| 1.3.6.1.4.1.2011.6.128.1.1.4.25.1.23 | ColumnhwGponOntEthernetStatisticRecvBufferOverflowson | read-only | current | This object indicates the number of received buffer overflows. |
| 1.3.6.1.4.1.2011.6.128.1.1.4.25.1.24 | ColumnhwGponOntEthernetStatisticSendBufferOverflowson | read-only | current | This object indicates the number of sent buffer overflows. |
| 1.3.6.1.4.1.2011.6.128.1.1.4.25.1.25 | ColumnhwGponOntEthernetStatisticSendSingleCollisionFrame | read-only | current | This object indicates the number of deferred sent frames due to single collision. |
| 1.3.6.1.4.1.2011.6.128.1.1.4.25.1.26 | ColumnhwGponOntEthernetStatisticSendMultipleCollisionsFrame | read-only | current | This object indicates the number of deferred sent frames due to multiple collisions. |
| 1.3.6.1.4.1.2011.6.128.1.1.4.25.1.27 | ColumnhwGponOntEthernetStatisticSendSQETestError | read-only | current | This object indicates the number of SQE test error messages. |
| 1.3.6.1.4.1.2011.6.128.1.1.4.25.1.28 | ColumnhwGponOntEthernetStatisticDeferredTransmission | read-only | current | This object indicates the sent deferred frames. |
| 1.3.6.1.4.1.2011.6.128.1.1.4.25.1.29 | ColumnhwGponOntEthernetStatisticInternalmacTransmitError | read-only | current | This object indicates the sent error frames at the MAC sub-layer. |
| 1.3.6.1.4.1.2011.6.128.1.1.4.25.1.30 | ColumnhwGponOntEthernetStatisticSendCarrierSenseError | read-only | current | This object indicates the sent carrier sense errors. |
| 1.3.6.1.4.1.2011.6.128.1.1.4.25.1.31 | ColumnhwGponOntEthernetStatisticRecvAlignmentError | read-only | current | This object indicates the received alignment error frames. |
| 1.3.6.1.4.1.2011.6.128.1.1.4.25.1.32 | ColumnhwGponOntEthernetStatisticInternalMACReceiveError | read-only | current | This object indicates the received error frames at the MAC sub-layer. |
| 1.3.6.1.4.1.2011.6.128.1.1.4.25.1.33 | ColumnhwGponOntEthernetStatisticRecvPPPoEFilteredFrame | read-only | current | This object indicates the received PPPoE filtered frames. |
| 1.3.6.1.4.1.2011.6.128.1.1.4.25.1.34 | ColumnhwGponOntEthernetStatisticSendForwardedFrame | read-only | current | This object indicates the send frames. |
| 1.3.6.1.4.1.2011.6.128.1.1.4.25.1.35 | ColumnhwGponOntEthernetStatisticDelayExceededDiscard | read-only | current | This object indicates the discarded frames due to delay. |
| 1.3.6.1.4.1.2011.6.128.1.1.4.25.1.36 | ColumnhwGponOntEthernetStatisticRecvUnicastPkts | read-only | current | This object indicates the received unicast frames. |
| 1.3.6.1.4.1.2011.6.128.1.1.4.25.1.37 | ColumnhwGponOntEthernetStatisticSendUnicastPkts | read-only | current | This object indicates the sent unicast frames. |
| 1.3.6.1.4.1.2011.6.128.1.1.4.25.1.38 | ColumnhwGponOntEthernetStatisticSendBroadcastPkts | read-only | current | This object indicates the sent broadcast frames. |
| 1.3.6.1.4.1.2011.6.128.1.1.4.25.1.39 | ColumnhwGponOntEthernetStatisticSendMulticastPkts | read-only | current | This object indicates the sent multicast frames. |
| 1.3.6.1.4.1.2011.6.128.1.1.4.25.1.40 | ColumnhwGponOntEthernetStatisticRecvPauseFlowCtrlFrame | read-only | current | This object indicates the received pause flow control frames. |
| 1.3.6.1.4.1.2011.6.128.1.1.4.25.1.41 | ColumnhwGponOntEthernetStatisticSendPauseFlowCtrlFrame | read-only | current | This object indicates the sent pause flow control frames. |
| 1.3.6.1.4.1.2011.6.128.1.1.4.25.1.42 | ColumnhwGponOntEthernetStatisticRecvGoodPktsOctets | read-only | current | This object indicates the received right octets. |
| 1.3.6.1.4.1.2011.6.128.1.1.4.25.1.43 | ColumnhwGponOntEthernetStatisticSendGoodPktsOctets | read-only | current | This object indicates the sent good frames octets. |
| 1.3.6.1.4.1.2011.6.128.1.1.4.25.1.44 | ColumnhwGponOntEthernetStatisticRecvBadPktsOctets | read-only | current | This object indicates the received error octets. |
| 1.3.6.1.4.1.2011.6.128.1.1.4.25.1.45 | ColumnhwGponOntEthernetStatisticSendBadPktsOctets | read-only | current | This object indicates the sent error octets. |
| 1.3.6.1.4.1.2011.6.128.1.1.4.25.1.46 | ColumnhwGponOntEthernetStatisticSendOctets | read-only | current | This object indicates the sent error octets. |
| 1.3.6.1.4.1.2011.6.128.1.1.4.25.1.47 | ColumnhwGponOntEthernetStatisticForwardDropEvents | read-only | current | This object indicates the sent drop events. |
| 1.3.6.1.4.1.2011.6.128.1.1.4.25.1.48 | ColumnhwGponOntEthernetStatisticSendPkts64Octets | read-only | current | This object indicates the sent 64-octet frames. |
| 1.3.6.1.4.1.2011.6.128.1.1.4.25.1.49 | ColumnhwGponOntEthernetStatisticSendPkts65to127Octets | read-only | current | This object indicates the sent 65~127-octet frames. |
| 1.3.6.1.4.1.2011.6.128.1.1.4.25.1.50 | ColumnhwGponOntEthernetStatisticSendPkts128to255Octets | read-only | current | This object indicates the sent 128~255-octet frames. |
| 1.3.6.1.4.1.2011.6.128.1.1.4.25.1.51 | ColumnhwGponOntEthernetStatisticSendPkts256to511Octets | read-only | current | This object indicates the sent 256~511-octet frames. |
| 1.3.6.1.4.1.2011.6.128.1.1.4.25.1.52 | ColumnhwGponOntEthernetStatisticSendPkts512to1023Octets | read-only | current | This object indicates the sent 512~1023-octet frames. |
| 1.3.6.1.4.1.2011.6.128.1.1.4.25.1.53 | ColumnhwGponOntEthernetStatisticSendPkts1024to1518Octets | read-only | current | This object indicates the sent 1024~1518-octet frames. |
| 1.3.6.1.4.1.2011.6.128.1.1.4.25.1.54 | ColumnhwGponOntEthernetStatisticSendPktsOversize | read-only | current | This object indicates the sent oversize frames. |
| 1.3.6.1.4.1.2011.6.128.1.1.4.25.1.55 | ColumnhwGponOntEthernetStatisticRecvPkts1519toOversizeOctets | read-only | current | This object indicates the received 1519~oversize-octet frames. |
| 1.3.6.1.4.1.2011.6.128.1.1.4.25.1.60 | ColumnhwGponOntEthernetStatisticClear | read-write | current | This object is used to clear the statistics. Options: 1. clear(1) - Indicates that clear the statistics 2. invalid(-1) - Indicates that the query fails or no i… |
| 1.3.6.1.4.1.2011.6.128.1.1.4.25.1.61 | ColumnhwGponOntEthernetStatisticStateChangeTimes | read-only | current | This object indicates the ONT ethernet port state changed times. |
| 1.3.6.1.4.1.2011.6.128.1.1.4.25.1.62 | ColumnhwGponOntEthernetStatisticDuration | read-only | current | Indicates the statistic duration of the GPON ONT ethernet port. Unit: second |
| 1.3.6.1.4.1.2011.6.128.1.1.4.26 | TablehwGponOntGemIndexStatisticTable | not-accessible | current | The ONT GEM Port statistics table. The index of this table is a combination of ifIndex, hwGponDeviceOntIndex and hwGponDeviceGemIndexObjectIndex. |
| 1.3.6.1.4.1.2011.6.128.1.1.4.26.1 | RowhwGponOntGemIndexStatisticEntry | not-accessible | current | The ONT GEM Port statistics table. The index of this entry is a combination of ifIndex, hwGponDeviceOntIndex and hwGponDeviceGemIndexObjectIndex. |
| 1.3.6.1.4.1.2011.6.128.1.1.4.26.1.1 | ColumnhwGponOntGemIndexStatisticRecvLostFrames | read-only | current | This object indicates the loss of frames. |
| 1.3.6.1.4.1.2011.6.128.1.1.4.26.1.2 | ColumnhwGponOntGemIndexStatisticMisinsertedFrames | read-only | current | This object indicates the misinserted frames. |
| 1.3.6.1.4.1.2011.6.128.1.1.4.26.1.3 | ColumnhwGponOntGemIndexStatisticRecvFrames | read-only | current | This object indicates the received frames. |
| 1.3.6.1.4.1.2011.6.128.1.1.4.26.1.4 | ColumnhwGponOntGemIndexStatisticRecvBlocks | read-only | current | This object indicates the received blocks. |
| 1.3.6.1.4.1.2011.6.128.1.1.4.26.1.5 | ColumnhwGponOntGemIndexStatisticSendBlocks | read-only | current | This object indicates the sent blocks. |
| 1.3.6.1.4.1.2011.6.128.1.1.4.26.1.6 | ColumnhwGponOntGemIndexStatisticImpairedBlocks | read-only | current | This object indicates the number of received impaired data blocks. |
| 1.3.6.1.4.1.2011.6.128.1.1.4.26.1.7 | ColumnhwGponOntGemIndexStatisticTransmittedGemFrames | read-only | current | This object indicates the number of transmitted GEM frames. |
| 1.3.6.1.4.1.2011.6.128.1.1.4.26.1.20 | ColumnhwGponOntGemIndexStatisticClear | read-write | current | This object is used to clear the statistics. Options: 1. clear(1) - Indicates that clear the statistics 2. invalid(-1) - Indicates that the query fails or no i… |
| 1.3.6.1.4.1.2011.6.128.1.1.4.27 | TablehwGponOntTrafficFlowStatisticTable | not-accessible | current | The ONT traffic stream statistics table. The index of this table is a combination of ifIndex and hwGponDeviceOntIndex. |
| 1.3.6.1.4.1.2011.6.128.1.1.4.27.1 | RowhwGponOntTrafficFlowStatisticEntry | not-accessible | current | The ONT traffic stream statistics table. The index of this entry is a combination of ifIndex and hwGponDeviceOntIndex. |
| 1.3.6.1.4.1.2011.6.128.1.1.4.27.1.1 | ColumnhwGponOntTrafficFlowStatisticLofiAlarmStatsCnt | read-only | current | This object indicates the number of the ONT LOFI alarms. |
| 1.3.6.1.4.1.2011.6.128.1.1.4.27.1.2 | ColumnhwGponOntTrafficFlowStatisticUpFramesScapeErrCnt | read-only | current | This object indicates the number of ONT upstream scape error frames. |
| 1.3.6.1.4.1.2011.6.128.1.1.4.27.1.3 | ColumnhwGponOntTrafficFlowStatisticUpFrameBipErrCnt | read-only | current | This object indicates the number of ONT upstream frames with BIP errors. |
| 1.3.6.1.4.1.2011.6.128.1.1.4.27.1.4 | ColumnhwGponOntTrafficFlowStatisticDnFramesBipErrCnt | read-only | current | This object indicates the number of ONT downstream frames with BIP errors. |
| 1.3.6.1.4.1.2011.6.128.1.1.4.27.1.5 | ColumnhwGponOntTrafficFlowStatisticUpFecDecodCorrectCnt | read-only | current | This object indicates the number of upstream FEC decoding corrected blocks. |
| 1.3.6.1.4.1.2011.6.128.1.1.4.27.1.6 | ColumnhwGponOntTrafficFlowStatisticUpFecDecodUnCorrectCnt | read-only | current | This object indicates the number of upstream FEC decoding uncorrected blocks. |
| 1.3.6.1.4.1.2011.6.128.1.1.4.27.1.7 | ColumnhwGponOntTrafficFlowStatisticUpHecCheckErrCnt | read-only | current | This object indicates the number of upstream HEC errors. |
| 1.3.6.1.4.1.2011.6.128.1.1.4.27.1.8 | ColumnhwGponOntTrafficFlowStatisticDowiAlarmCnt | read-only | current | The count of ONU DOWi(Drift of Window) Alarm. |
| 1.3.6.1.4.1.2011.6.128.1.1.4.27.1.9 | ColumnhwGponOntTrafficFlowStatisticUpFecCodeDecodCorrectCnt | read-only | current | This object indicates the number of upstream FEC code decoding corrected blocks. |
| 1.3.6.1.4.1.2011.6.128.1.1.4.27.1.10 | ColumnhwGponOntTrafficFlowStatisticUpFecCodeCnt | read-only | current | This object indicates the number of upstream FEC code blocks. |
| 1.3.6.1.4.1.2011.6.128.1.1.4.27.1.11 | ColumnhwGponOntTrafficFlowStatisticUpFcsErrorCnt | read-only | current | This object indicates the number of upstream FCS code errors in current 15 minutes. The value (-1) indicates that the query fails or no information is detected. |
| 1.3.6.1.4.1.2011.6.128.1.1.4.27.1.12 | ColumnhwGponOntTrafficFlowStatisticUpFrameBitErrorRatio | read-only | current | This object indicates upstream frame bit error ratio in current 15 minutes. The value of this object indicates the exponente of the exponential expression of t… |
| 1.3.6.1.4.1.2011.6.128.1.1.4.27.1.13 | ColumnhwGponOntTrafficFlowStatisticUpEthFrameErrorRatio | read-only | current | This object indicates upstream ETH frame error ratio in current 15 minutes. The value of this object indicates the exponente of the exponential expression of t… |
| 1.3.6.1.4.1.2011.6.128.1.1.4.27.1.14 | ColumnhwGponOntTrafficFlowStatisticUpGemFrameErrorRatio | read-only | current | This object indicates upstream GEM frame error ratio in current 15 minutes. The value of this object indicates the exponente of the exponential expression of t… |
| 1.3.6.1.4.1.2011.6.128.1.1.4.27.1.20 | ColumnhwGponOntTrafficFlowStatisticClear | read-write | current | This object is used to clear the statistics. Options: 1. clear(1) - Indicates that clear the statistics 2. invalid(-1) - Indicates that the query fails or no i… |
| 1.3.6.1.4.1.2011.6.128.1.1.4.41 | TablehwEponOltEthernetStatisticTable | not-accessible | current | The OLT ETH statisitcs table. The index of this table is ifIndex. |
| 1.3.6.1.4.1.2011.6.128.1.1.4.41.1 | RowhwEponOltEthernetStatisticEntry | not-accessible | current | The OLT ETH statisitcs table. The index of this entry is ifIndex. |
| 1.3.6.1.4.1.2011.6.128.1.1.4.41.1.1 | ColumnhwEponOltEthernetStatisticRcvFrames | read-only | current | This object indicates the received frames. |
| 1.3.6.1.4.1.2011.6.128.1.1.4.41.1.2 | ColumnhwEponOltEthernetStatisticRcvBoardcastFrames | read-only | current | This object indicates the received broadcast frames. |
| 1.3.6.1.4.1.2011.6.128.1.1.4.41.1.3 | ColumnhwEponOltEthernetStatisticRcvMulticastFrames | read-only | current | This object indicates the received multicast frames. |
| 1.3.6.1.4.1.2011.6.128.1.1.4.41.1.4 | ColumnhwEponOltEthernetStatisticRcvUnicastFrames | read-only | current | This object indicates the received unicast frames. |
| 1.3.6.1.4.1.2011.6.128.1.1.4.41.1.5 | ColumnhwEponOltEthernetStatisticRcv64OctetFrames | read-only | current | This object indicates the received 64-octet frames. |
| 1.3.6.1.4.1.2011.6.128.1.1.4.41.1.6 | ColumnhwEponOltEthernetStatisticRcv65to127OctetFrames | read-only | current | This object indicates the received 65~127-octet frames. |
| 1.3.6.1.4.1.2011.6.128.1.1.4.41.1.7 | ColumnhwEponOltEthernetStatisticRcv128to255OctetFrames | read-only | current | This object indicates the received 128~255-octet frames. |
| 1.3.6.1.4.1.2011.6.128.1.1.4.41.1.8 | ColumnhwEponOltEthernetStatisticRcv256to511OctetFrames | read-only | current | This object indicates the received 256~511-octet frames. |
| 1.3.6.1.4.1.2011.6.128.1.1.4.41.1.9 | ColumnhwEponOltEthernetStatisticRcv512to1023OctetFrames | read-only | current | This object indicates the received 512~1023-octet frames. |
| 1.3.6.1.4.1.2011.6.128.1.1.4.41.1.10 | ColumnhwEponOltEthernetStatisticRcv1024to1518OctetFrames | read-only | current | This object indicates the received 1024~1518-octet frames. |
| 1.3.6.1.4.1.2011.6.128.1.1.4.41.1.11 | ColumnhwEponOltEthernetStatisticRcvOver1518OctetFrames | read-only | current | This object indicates the received over 1518-octet frames. |
| 1.3.6.1.4.1.2011.6.128.1.1.4.41.1.12 | ColumnhwEponOltEthernetStatisticRcvOctets | read-only | current | This object indicates the received octets. |
| 1.3.6.1.4.1.2011.6.128.1.1.4.41.1.13 | ColumnhwEponOltEthernetStatisticRcvOversizeFrames | read-only | current | This object indicates the received oversize frames. |
| 1.3.6.1.4.1.2011.6.128.1.1.4.41.1.14 | ColumnhwEponOltEthernetStatisticRcvUndersizeFrames | read-only | current | This object indicates the received undersize frames. |
| 1.3.6.1.4.1.2011.6.128.1.1.4.41.1.15 | ColumnhwEponOltEthernetStatisticRcvCrcErrorFrames | read-only | current | This object indicates the received CRC error frames. |
| 1.3.6.1.4.1.2011.6.128.1.1.4.41.1.16 | ColumnhwEponOltEthernetStatisticRcvDiscardFrames | read-only | current | This object indicates the received discarded frames. |
| 1.3.6.1.4.1.2011.6.128.1.1.4.41.1.17 | ColumnhwEponOltEthernetStatisticSendFrames | read-only | current | This object indicates the sent frames. |
| 1.3.6.1.4.1.2011.6.128.1.1.4.41.1.18 | ColumnhwEponOltEthernetStatisticSendBoardcastFrames | read-only | current | This object indicates the sent broadcast frames. |
| 1.3.6.1.4.1.2011.6.128.1.1.4.41.1.19 | ColumnhwEponOltEthernetStatisticSendMulticastFrames | read-only | current | This object indicates the sent multicast frames. |
| 1.3.6.1.4.1.2011.6.128.1.1.4.41.1.20 | ColumnhwEponOltEthernetStatisticSendUnicastFrames | read-only | current | This object indicates the sent unicast frames. |
| 1.3.6.1.4.1.2011.6.128.1.1.4.41.1.21 | ColumnhwEponOltEthernetStatisticSend64OctetFrames | read-only | current | This object indicates the sent 64-octet frames. |
| 1.3.6.1.4.1.2011.6.128.1.1.4.41.1.22 | ColumnhwEponOltEthernetStatisticSend65to127OctetFrames | read-only | current | This object indicates the sent 65~127-octet frames. |
| 1.3.6.1.4.1.2011.6.128.1.1.4.41.1.23 | ColumnhwEponOltEthernetStatisticSend128to255OctetFrames | read-only | current | This object indicates the sent 128~255-octet frames. |
| 1.3.6.1.4.1.2011.6.128.1.1.4.41.1.24 | ColumnhwEponOltEthernetStatisticSend256to511OctetFrames | read-only | current | This object indicates the sent 256~511-octet frames. |
| 1.3.6.1.4.1.2011.6.128.1.1.4.41.1.25 | ColumnhwEponOltEthernetStatisticSend512to1023OctetFrames | read-only | current | This object indicates the sent 512~1023-octet frames. |
| 1.3.6.1.4.1.2011.6.128.1.1.4.41.1.26 | ColumnhwEponOltEthernetStatisticSend1024to1518OctetFrames | read-only | current | This object indicates the sent 1024~1518-octet frames. |
| 1.3.6.1.4.1.2011.6.128.1.1.4.41.1.27 | ColumnhwEponOltEthernetStatisticSendOver1518OctetFrames | read-only | current | This object indicates the sent over 1518-octet frames. |
| 1.3.6.1.4.1.2011.6.128.1.1.4.41.1.28 | ColumnhwEponOltEthernetStatisticSendOctets | read-only | current | This object indicates the sent octets. |
| 1.3.6.1.4.1.2011.6.128.1.1.4.41.1.50 | ColumnhwEponOltEthernetStatisticClear | read-write | current | This object is used to clear the statistics. Options: 1. clear(1) - Indicates that clear the statistics 2. invalid(-1) - Indicates that the query fails or no i… |
| 1.3.6.1.4.1.2011.6.128.1.1.4.41.1.51 | ColumnhwEponOltEthernetStatisticRcvErrorFrames | read-only | current | This object indicates the received error frames. |
| 1.3.6.1.4.1.2011.6.128.1.1.4.41.1.52 | ColumnhwEponOltEthernetStatisticRcvFragments | read-only | current | This object indicates the received fragments. |
| 1.3.6.1.4.1.2011.6.128.1.1.4.41.1.53 | ColumnhwEponOltEthernetStatisticRcvJabbers | read-only | current | This object indicates the received jabbers. |
| 1.3.6.1.4.1.2011.6.128.1.1.4.41.1.54 | ColumnhwEponOltEthernetStatisticRcvDropEvents | read-only | current | This object indicates the received drop events. |
| 1.3.6.1.4.1.2011.6.128.1.1.4.41.1.55 | ColumnhwEponOltEthernetStatisticSendDropEvents | read-only | current | This object indicates the send drop events. |
| 1.3.6.1.4.1.2011.6.128.1.1.4.41.1.56 | ColumnhwEponOltEthernetStatisticSendDiscardFrames | read-only | current | This object indicates the send discard frames. |
| 1.3.6.1.4.1.2011.6.128.1.1.4.41.1.57 | ColumnhwEponOltEthernetStatisticSendErrorFrames | read-only | current | This object indicates the send error frames. |
| 1.3.6.1.4.1.2011.6.128.1.1.4.41.1.58 | ColumnhwEponOltEthernetStatisticSendCrcErrorFrames | read-only | current | This object indicates the send CRC error frames. |
| 1.3.6.1.4.1.2011.6.128.1.1.4.41.1.59 | ColumnhwEponOltEthernetStatisticSendUndersizeFrames | read-only | current | This object indicates the send undersize frames. |
| 1.3.6.1.4.1.2011.6.128.1.1.4.41.1.60 | ColumnhwEponOltEthernetStatisticSendOversizeFrames | read-only | current | This object indicates the send oversize frames. |
| 1.3.6.1.4.1.2011.6.128.1.1.4.41.1.61 | ColumnhwEponOltEthernetStatisticSendFragments | read-only | current | This object indicates the send fragments. |
| 1.3.6.1.4.1.2011.6.128.1.1.4.41.1.62 | ColumnhwEponOltEthernetStatisticSendJabbers | read-only | current | This object indicates the send jabbers. |
| 1.3.6.1.4.1.2011.6.128.1.1.4.42 | TablehwEponOltLlidStatisticTable | not-accessible | current | The OLT LLID statistics table. The index of this table is a combination of ifIndex, hwEponDeviceOntIndex and hwEponDeviceOntLlid. |
| 1.3.6.1.4.1.2011.6.128.1.1.4.42.1 | RowhwEponOltLlidStatisticEntry | not-accessible | current | The OLT LLID statistics table. The index of this entry is a combination of ifIndex, hwEponDeviceOntIndex and hwEponDeviceOntLlid. |
| 1.3.6.1.4.1.2011.6.128.1.1.4.42.1.1 | ColumnhwEponDeviceOntLlid | not-accessible | current | This object indicates the ONT LLID. |
| 1.3.6.1.4.1.2011.6.128.1.1.4.42.1.2 | ColumnhwEponOltLlidStatisticRecvDataFrames | read-only | current | This object indicates the received data frames. |
| 1.3.6.1.4.1.2011.6.128.1.1.4.42.1.3 | ColumnhwEponOltLlidStatisticRecvDataBytes | read-only | current | This object indicates the received data octets. |
| 1.3.6.1.4.1.2011.6.128.1.1.4.42.1.4 | ColumnhwEponOltLlidStatisticRecvUnicastFrames | read-only | current | This object indicates the received unicast frames. |
| 1.3.6.1.4.1.2011.6.128.1.1.4.42.1.5 | ColumnhwEponOltLlidStatisticRecvMulticastFrames | read-only | current | This object indicates the received multicast frames. |
| 1.3.6.1.4.1.2011.6.128.1.1.4.42.1.6 | ColumnhwEponOltLlidStatisticRecvBoardcastFrames | read-only | current | This object indicates the received broadcast frames. |
| 1.3.6.1.4.1.2011.6.128.1.1.4.42.1.7 | ColumnhwEponOltLlidStatisticRecvRightFrames | read-only | current | This object indicates the received right frames. |
| 1.3.6.1.4.1.2011.6.128.1.1.4.42.1.8 | ColumnhwEponOltLlidStatisticRecvRightBytes | read-only | current | This object indicates the received right octets. |
| 1.3.6.1.4.1.2011.6.128.1.1.4.42.1.9 | ColumnhwEponOltLlidStatisticRecvErrorFrames | read-only | current | This object indicates the received error frames. |
| 1.3.6.1.4.1.2011.6.128.1.1.4.42.1.10 | ColumnhwEponOltLlidStatisticRecvErrorBytes | read-only | current | This object indicates the received error octets. |
| 1.3.6.1.4.1.2011.6.128.1.1.4.42.1.11 | ColumnhwEponOltLlidStatisticRecv64ByteFrames | read-only | current | This object indicates the received 64-octet frames. |
| 1.3.6.1.4.1.2011.6.128.1.1.4.42.1.12 | ColumnhwEponOltLlidStatisticRecv65to127ByteFrames | read-only | current | This object indicates the received 65~127-octet frames. |
| 1.3.6.1.4.1.2011.6.128.1.1.4.42.1.13 | ColumnhwEponOltLlidStatisticRecv128to255ByteFrames | read-only | current | This object indicates the received 128~255-octet frames. |
| 1.3.6.1.4.1.2011.6.128.1.1.4.42.1.14 | ColumnhwEponOltLlidStatisticRecv256to511ByteFrames | read-only | current | This object indicates the received 256~511-octet frames. |
| 1.3.6.1.4.1.2011.6.128.1.1.4.42.1.15 | ColumnhwEponOltLlidStatisticRecv512to1023ByteFrames | read-only | current | This object indicates the received 512~1023-octet frames. |
| 1.3.6.1.4.1.2011.6.128.1.1.4.42.1.16 | ColumnhwEponOltLlidStatisticRecv1024to1518ByteFrames | read-only | current | This object indicates the received 1024~1518-octet frames. |
| 1.3.6.1.4.1.2011.6.128.1.1.4.42.1.17 | ColumnhwEponOltLlidStatisticRecvOver1518ByteFrames | read-only | current | This object indicates the received over 1518-octet frames. |
| 1.3.6.1.4.1.2011.6.128.1.1.4.42.1.18 | ColumnhwEponOltLlidStatisticRecvUndersizeFrames | read-only | current | This object indicates the received undersize frames. |
| 1.3.6.1.4.1.2011.6.128.1.1.4.42.1.19 | ColumnhwEponOltLlidStatisticRecvOversizeFrames | read-only | current | This object indicates the received oversize frames. |
| 1.3.6.1.4.1.2011.6.128.1.1.4.42.1.20 | ColumnhwEponOltLlidStatisticRecvFcsErrorFrames | read-only | current | This object indicates the received FCS error frames. |
| 1.3.6.1.4.1.2011.6.128.1.1.4.42.1.21 | ColumnhwEponOltLlidStatisticTransDataFrames | read-only | current | This object indicates the sent data frames. |
| 1.3.6.1.4.1.2011.6.128.1.1.4.42.1.22 | ColumnhwEponOltLlidStatisticTransDataBytes | read-only | current | This object indicates the sent data octets. |
| 1.3.6.1.4.1.2011.6.128.1.1.4.42.1.23 | ColumnhwEponOltLlidStatisticTransUnicastFrames | read-only | current | This object indicates the sent unicast frames. |
| 1.3.6.1.4.1.2011.6.128.1.1.4.42.1.24 | ColumnhwEponOltLlidStatisticTransMulticastFrames | read-only | current | This object indicates the sent multicast frames. |
| 1.3.6.1.4.1.2011.6.128.1.1.4.42.1.25 | ColumnhwEponOltLlidStatisticTransBoardcastFrames | read-only | current | This object indicates the sent broadcast frames. |
| 1.3.6.1.4.1.2011.6.128.1.1.4.42.1.26 | ColumnhwEponOltLlidStatisticTrans64ByteFrames | read-only | current | This object indicates the sent 64-octet frames. |
| 1.3.6.1.4.1.2011.6.128.1.1.4.42.1.27 | ColumnhwEponOltLlidStatisticTrans65to127ByteFrames | read-only | current | This object indicates the sent 65~127-octet frames. |
| 1.3.6.1.4.1.2011.6.128.1.1.4.42.1.28 | ColumnhwEponOltLlidStatisticTrans128to255ByteFrames | read-only | current | This object indicates the sent 128~255-octet frames. |
| 1.3.6.1.4.1.2011.6.128.1.1.4.42.1.29 | ColumnhwEponOltLlidStatisticTrans256to511ByteFrames | read-only | current | This object indicates the sent 256~511-octet frames. |
| 1.3.6.1.4.1.2011.6.128.1.1.4.42.1.30 | ColumnhwEponOltLlidStatisticTrans512to1023ByteFrames | read-only | current | This object indicates the sent 512~1023-octet frames. |
| 1.3.6.1.4.1.2011.6.128.1.1.4.42.1.31 | ColumnhwEponOltLlidStatisticTrans1024to1518ByteFrames | read-only | current | This object indicates the sent 1024~1518-octet frames. |
| 1.3.6.1.4.1.2011.6.128.1.1.4.42.1.32 | ColumnhwEponOltLlidStatisticTransOver1518ByteFrames | read-only | current | This object indicates the sent over 1518-octet frames. |
| 1.3.6.1.4.1.2011.6.128.1.1.4.42.1.33 | ColumnhwEponOltLlidStatisticTransFcsErrorFrames | read-only | current | This object indicates the sent FCS error frames. |
| 1.3.6.1.4.1.2011.6.128.1.1.4.42.1.34 | ColumnhwEponOltLlidStatisticRecvLineCodeErrorFrames | read-only | current | Received line code error frames. |
| 1.3.6.1.4.1.2011.6.128.1.1.4.42.1.50 | ColumnhwEponOltLlidStatisticClear | read-write | current | This object is used to clear the statistics. Options: 1. clear(1) - Indicates that clear the statistics 2. invalid(-1) - Indicates that the query fails or no i… |
| 1.3.6.1.4.1.2011.6.128.1.1.4.42.1.51 | ColumnhwEponOltLlidStatisticRecvCrcErrorFrames | read-only | current | This object indicates the recieved CRC error frames. |
| 1.3.6.1.4.1.2011.6.128.1.1.4.42.1.52 | ColumnhwEponOltLlidStatisticRecvFragments | read-only | current | This object indicates the recieved fragments. |
| 1.3.6.1.4.1.2011.6.128.1.1.4.42.1.53 | ColumnhwEponOltLlidStatisticRecvJabbers | read-only | current | This object indicates the recieved jabbers. |
| 1.3.6.1.4.1.2011.6.128.1.1.4.42.1.54 | ColumnhwEponOltLlidStatisticRecvDiscardFrames | read-only | current | This object indicates the recieved discarded frames. |
| 1.3.6.1.4.1.2011.6.128.1.1.4.42.1.55 | ColumnhwEponOltLlidStatisticRecvDropEvents | read-only | current | This object indicates the recieved drop events. |
| 1.3.6.1.4.1.2011.6.128.1.1.4.42.1.56 | ColumnhwEponOltLlidStatisticTransDropEvents | read-only | current | This object indicates the sent drop events. |
| 1.3.6.1.4.1.2011.6.128.1.1.4.42.1.57 | ColumnhwEponOltLlidStatisticTransDiscardFrames | read-only | current | This object indicates the sent discarded frames. |
| 1.3.6.1.4.1.2011.6.128.1.1.4.42.1.58 | ColumnhwEponOltLlidStatisticTransErrorFrames | read-only | current | This object indicates the sent error frames. |
| 1.3.6.1.4.1.2011.6.128.1.1.4.42.1.59 | ColumnhwEponOltLlidStatisticTransCrcErrorFrames | read-only | current | This object indicates the sent CRC error frames. |
| 1.3.6.1.4.1.2011.6.128.1.1.4.42.1.60 | ColumnhwEponOltLlidStatisticTransUndersizeFrames | read-only | current | This object indicates the sent undersize frames. |
| 1.3.6.1.4.1.2011.6.128.1.1.4.42.1.61 | ColumnhwEponOltLlidStatisticTransOversizeFrames | read-only | current | This object indicates the sent oversize frames. |
| 1.3.6.1.4.1.2011.6.128.1.1.4.42.1.62 | ColumnhwEponOltLlidStatisticTransFragments | read-only | current | This object indicates the sent fragments. |
| 1.3.6.1.4.1.2011.6.128.1.1.4.42.1.63 | ColumnhwEponOltLlidStatisticTransJabbers | read-only | current | This object indicates the sent jabbers. |
| 1.3.6.1.4.1.2011.6.128.1.1.4.43 | TablehwEponOntEthernetPortStatisticTable | not-accessible | current | The ONT ETH port statistics table. The index of this table is a combination of ifIndex, hwEponDeviceOntIndex and hwEponDeviceOntEthernetPortId. |
| 1.3.6.1.4.1.2011.6.128.1.1.4.43.1 | RowhwEponOntEthernetPortStatisticEntry | not-accessible | current | The ONT ETH port statistics table. The index of this entry is a combination of ifIndex, hwEponDeviceOntIndex and hwEponDeviceOntEthernetPortId. |
| 1.3.6.1.4.1.2011.6.128.1.1.4.43.1.1 | ColumnhwEponOntEthernetPortStatisticRecvFrames | read-only | current | This object indicates the received frames. |
| 1.3.6.1.4.1.2011.6.128.1.1.4.43.1.2 | ColumnhwEponOntEthernetPortStatisticRecvMulticastFrames | read-only | current | This object indicates the received multicast frames. |
| 1.3.6.1.4.1.2011.6.128.1.1.4.43.1.3 | ColumnhwEponOntEthernetPortStatisticRecvBroadcastFrames | read-only | current | This object indicates the received boardcast frames. |
| 1.3.6.1.4.1.2011.6.128.1.1.4.43.1.4 | ColumnhwEponOntEthernetPortStatisticRecv64OctetFrames | read-only | current | This object indicates the received 64-octet frames. |
| 1.3.6.1.4.1.2011.6.128.1.1.4.43.1.5 | ColumnhwEponOntEthernetPortStatisticRecv65to127OctetFrames | read-only | current | This object indicates the received 65~127-octet frames. |
| 1.3.6.1.4.1.2011.6.128.1.1.4.43.1.6 | ColumnhwEponOntEthernetPortStatisticRecv128to255OctetFrames | read-only | current | This object indicates the received 128~255-octet frames. |
| 1.3.6.1.4.1.2011.6.128.1.1.4.43.1.7 | ColumnhwEponOntEthernetPortStatisticRecv256to511OctetFrames | read-only | current | This object indicates the received 256~511-octet frames. |
| 1.3.6.1.4.1.2011.6.128.1.1.4.43.1.8 | ColumnhwEponOntEthernetPortStatisticRecv512to1023OctetFrames | read-only | current | This object indicates the received 512~1023-octet frames. |
| 1.3.6.1.4.1.2011.6.128.1.1.4.43.1.9 | ColumnhwEponOntEthernetPortStatisticRecv1024to1518OctetFrames | read-only | current | This object indicates the received 1024~1518-octet frames. |
| 1.3.6.1.4.1.2011.6.128.1.1.4.43.1.10 | ColumnhwEponOntEthernetPortStatisticRecvUndersizeFrames | read-only | current | This object indicates the received undersize frames. |
| 1.3.6.1.4.1.2011.6.128.1.1.4.43.1.11 | ColumnhwEponOntEthernetPortStatisticRecvTooLongFrames | read-only | current | This object indicates the received oversize frames. |
| 1.3.6.1.4.1.2011.6.128.1.1.4.43.1.12 | ColumnhwEponOntEthernetPortStatisticRecvFragments | read-only | current | This object indicates the received fragments. |
| 1.3.6.1.4.1.2011.6.128.1.1.4.43.1.13 | ColumnhwEponOntEthernetPortStatisticRecvJabberErrorFrames | read-only | current | This object indicates the received jabbers error frames. |
| 1.3.6.1.4.1.2011.6.128.1.1.4.43.1.14 | ColumnhwEponOntEthernetPortStatisticRecvFCSErrorFrames | read-only | current | This object indicates the received FCS error frames. |
| 1.3.6.1.4.1.2011.6.128.1.1.4.43.1.15 | ColumnhwEponOntEthernetPortStatisticRecvDropFrames | read-only | current | This object indicates the received discarded frames. |
| 1.3.6.1.4.1.2011.6.128.1.1.4.43.1.16 | ColumnhwEponOntEthernetPortStatisticRecvAlignmentErrorFrames | read-only | current | This object indicates the received alignment error frames. |
| 1.3.6.1.4.1.2011.6.128.1.1.4.43.1.17 | ColumnhwEponOntEthernetPortStatisticInternalMACRecvErrorFrames | read-only | current | This object indicates the received error frames at the MAC sub-layer. |
| 1.3.6.1.4.1.2011.6.128.1.1.4.43.1.18 | ColumnhwEponOntEthernetPortStatisticRecvPPPoEFilteredFrames | read-only | current | This object indicates the received PPPoE filtered frames. |
| 1.3.6.1.4.1.2011.6.128.1.1.4.43.1.19 | ColumnhwEponOntEthernetPortStatisticRecvBufferOverflows | read-only | current | This object indicates the received buffer overflows. |
| 1.3.6.1.4.1.2011.6.128.1.1.4.43.1.20 | ColumnhwEponOntEthernetPortStatisticRecvOctets | read-only | current | This object indicates the received octets. |
| 1.3.6.1.4.1.2011.6.128.1.1.4.43.1.21 | ColumnhwEponOntEthernetPortStatisticTransFrames | read-only | current | This object indicates the sent frames. |
| 1.3.6.1.4.1.2011.6.128.1.1.4.43.1.22 | ColumnhwEponOntEthernetPortStatisticTransDeferredFrames | read-only | current | This object indicates the sent deferred frames. |
| 1.3.6.1.4.1.2011.6.128.1.1.4.43.1.23 | ColumnhwEponOntEthernetPortStatisticTransMTUExceededDiscardFrames | read-only | current | This object indicates the sent MTU exceeded discard frames. |
| 1.3.6.1.4.1.2011.6.128.1.1.4.43.1.24 | ColumnhwEponOntEthernetPortStatisticTransCarrierSenseErrorFrames | read-only | current | This object indicates the sent carrier sense errors. |
| 1.3.6.1.4.1.2011.6.128.1.1.4.43.1.25 | ColumnhwEponOntEthernetPortStatisticTransSQETestErrorFrames | read-only | current | This object indicates the sent SQE test errors. |
| 1.3.6.1.4.1.2011.6.128.1.1.4.43.1.26 | ColumnhwEponOntEthernetPortStatisticTransSingleCollisionFrames | read-only | current | This object indicates the sent single collision frames. |
| 1.3.6.1.4.1.2011.6.128.1.1.4.43.1.27 | ColumnhwEponOntEthernetPortStatisticTransMultipleCollisionsFrames | read-only | current | This object indicates the sent multiple collision frames. |
| 1.3.6.1.4.1.2011.6.128.1.1.4.43.1.28 | ColumnhwEponOntEthernetPortStatisticTransExcessiveCollisionFrames | read-only | current | This object indicates the sent excessive collision frames. |
| 1.3.6.1.4.1.2011.6.128.1.1.4.43.1.29 | ColumnhwEponOntEthernetPortStatisticTransLateCollisionFrames | read-only | current | This object indicates the sent late collisions. |
| 1.3.6.1.4.1.2011.6.128.1.1.4.43.1.30 | ColumnhwEponOntEthernetPortStatisticInternalmacTransErrorFrames | read-only | current | This object indicates the sent error frames at the MAC sub-layer. |
| 1.3.6.1.4.1.2011.6.128.1.1.4.43.1.31 | ColumnhwEponOntEthernetPortStatisticTransBufferOverflows | read-only | current | This object indicates the sent buffer overflows. |
| 1.3.6.1.4.1.2011.6.128.1.1.4.43.1.32 | ColumnhwEponOntEthernetPortStatisticTransOctets | read-only | current | This object indicates the sent octets. |
| 1.3.6.1.4.1.2011.6.128.1.1.4.43.1.33 | ColumnhwEponOntEthernetPortStatisticStateChange | read-only | current | This object indicates the state changed times. |
| 1.3.6.1.4.1.2011.6.128.1.1.4.43.1.34 | ColumnhwEponOntEthernetPortStatisticTransUnicastFrames | read-only | current | This object indicates the sent unicast frames. |
| 1.3.6.1.4.1.2011.6.128.1.1.4.43.1.35 | ColumnhwEponOntEthernetPortStatisticTransBroadcastFrames | read-only | current | This object indicates the sent broadcast frames. |
| 1.3.6.1.4.1.2011.6.128.1.1.4.43.1.36 | ColumnhwEponOntEthernetPortStatisticTransMulticastFrames | read-only | current | This object indicates the sent multicast frames. |
| 1.3.6.1.4.1.2011.6.128.1.1.4.43.1.37 | ColumnhwEponOntEthernetPortStatisticRecv1519toOversizeOctetFrames | read-only | current | This object indicates the received 1519~oversize-octet frames. |
| 1.3.6.1.4.1.2011.6.128.1.1.4.43.1.38 | ColumnhwEponOntEthernetPortStatisticRecvUnicastFrames | read-only | current | This object indicates the received unicast frames. |
| 1.3.6.1.4.1.2011.6.128.1.1.4.43.1.39 | ColumnhwEponOntEthernetPortStatisticTrans64OctetFrames | read-only | current | This object indicates the sent 64-octet frames. |
| 1.3.6.1.4.1.2011.6.128.1.1.4.43.1.40 | ColumnhwEponOntEthernetPortStatisticTrans65to127OctetFrames | read-only | current | This object indicates the sent 65~127-octet frames. |
| 1.3.6.1.4.1.2011.6.128.1.1.4.43.1.41 | ColumnhwEponOntEthernetPortStatisticTrans128to255OctetFrames | read-only | current | This object indicates the sent 128~255-octet frames. |
| 1.3.6.1.4.1.2011.6.128.1.1.4.43.1.42 | ColumnhwEponOntEthernetPortStatisticTrans256to511OctetFrames | read-only | current | This object indicates the sent 256~511-octet frames. |
| 1.3.6.1.4.1.2011.6.128.1.1.4.43.1.43 | ColumnhwEponOntEthernetPortStatisticTrans512to1023OctetFrames | read-only | current | This object indicates the sent 512~1023-octet frames. |
| 1.3.6.1.4.1.2011.6.128.1.1.4.43.1.44 | ColumnhwEponOntEthernetPortStatisticTrans1024to1518OctetFrames | read-only | current | This object indicates the sent 1024~1518-octet frames. |
| 1.3.6.1.4.1.2011.6.128.1.1.4.43.1.45 | ColumnhwEponOntEthernetPortStatisticTransOver1518OctetFrames | read-only | current | This object indicates the sent over 1518-octet frames. |
| 1.3.6.1.4.1.2011.6.128.1.1.4.43.1.50 | ColumnhwEponOntEthernetPortStatisticClear | read-write | current | This object is used to clear the statistics. Options: 1. clear(1) - Indicates that clear the statistics 2. invalid(-1) - Indicates that the query fails or no i… |
| 1.3.6.1.4.1.2011.6.128.1.1.4.43.1.51 | ColumnhwEponOntEthernetPortStatisticRecvErrorFrames | read-only | current | This object indicates the received error frames. |
| 1.3.6.1.4.1.2011.6.128.1.1.4.43.1.52 | ColumnhwEponOntEthernetPortStatisticRecvCrcErrorFrames | read-only | current | This object indicates the received CRC error frames. |
| 1.3.6.1.4.1.2011.6.128.1.1.4.43.1.53 | ColumnhwEponOntEthernetPortStatisticRecvDropEvents | read-only | current | This object indicates the received drop events. |
| 1.3.6.1.4.1.2011.6.128.1.1.4.43.1.54 | ColumnhwEponOntEthernetPortStatisticTransDropEvents | read-only | current | This object indicates the sent drop events. |
| 1.3.6.1.4.1.2011.6.128.1.1.4.43.1.55 | ColumnhwEponOntEthernetPortStatisticTransDiscardFrames | read-only | current | This object indicates the sent discarded frames. |
| 1.3.6.1.4.1.2011.6.128.1.1.4.43.1.56 | ColumnhwEponOntEthernetPortStatisticTransErrorFrames | read-only | current | This object indicates the sent error frames. |
| 1.3.6.1.4.1.2011.6.128.1.1.4.43.1.57 | ColumnhwEponOntEthernetPortStatisticTransCrcErrorFrames | read-only | current | This object indicates the sent CRC error frames. |
| 1.3.6.1.4.1.2011.6.128.1.1.4.43.1.58 | ColumnhwEponOntEthernetPortStatisticTransUndersizeFrames | read-only | current | This object indicates the sent undersize frames. |
| 1.3.6.1.4.1.2011.6.128.1.1.4.43.1.59 | ColumnhwEponOntEthernetPortStatisticTransOversizeFrames | read-only | current | This object indicates the sent oversize frames. |
| 1.3.6.1.4.1.2011.6.128.1.1.4.43.1.60 | ColumnhwEponOntEthernetPortStatisticTransFragments | read-only | current | This object indicates the sent fragments. |
| 1.3.6.1.4.1.2011.6.128.1.1.4.43.1.61 | ColumnhwEponOntEthernetPortStatisticTransJabbers | read-only | current | This object indicates the sent jabbers. |
| 1.3.6.1.4.1.2011.6.128.1.1.4.44 | TablehwEponOntCPUStatisticTable | not-accessible | current | The ONT CPU statistics table. The index of this table is a combination of ifIndex, and hwEponDeviceOntIndex. |
| 1.3.6.1.4.1.2011.6.128.1.1.4.44.1 | RowhwEponOntCPUStatisticEntry | not-accessible | current | The ONT CPU statistics table. The index of this entry is a combination of ifIndex, and hwEponDeviceOntIndex. |
| 1.3.6.1.4.1.2011.6.128.1.1.4.44.1.1 | ColumnhwEponOntCPUStatisticIGMP | read-only | current | This object indicates the IGMP frames transmitted through the CPU. |
| 1.3.6.1.4.1.2011.6.128.1.1.4.44.1.2 | ColumnhwEponOntCPUStatisticARP | read-only | current | This object indicates the ARP frames transmitted through the CPU. |
| 1.3.6.1.4.1.2011.6.128.1.1.4.44.1.3 | ColumnhwEponOntCPUStatisticDHCP | read-only | current | This object indicates the DHCP frames transmitted through the CPU. |
| 1.3.6.1.4.1.2011.6.128.1.1.4.44.1.4 | ColumnhwEponOntCPUStatisticPPPOE | read-only | current | This object indicates the PPPOE frames transmitted through the CPU. |
| 1.3.6.1.4.1.2011.6.128.1.1.4.44.1.5 | ColumnhwEponOntCPUStatisticVOIP | read-only | current | This object indicates the VOIP frames transmitted through the CPU. |
| 1.3.6.1.4.1.2011.6.128.1.1.4.44.1.6 | ColumnhwEponOntCPUStatisticDBPU | read-only | current | This object indicates the BPDU frames transmitted through the CPU. |
| 1.3.6.1.4.1.2011.6.128.1.1.4.44.1.7 | ColumnhwEponOntCPUStatisticOTHER | read-only | current | This object indicates the other frames transmitted through the CPU. |
| 1.3.6.1.4.1.2011.6.128.1.1.4.44.1.20 | ColumnhwEponOntCPUStatisticClear | read-write | current | This object is used to clear the statistics. Options: 1. clear(1) - Indicates that clear the statistics 2. invalid(-1) - Indicates that the query fails or no i… |
| 1.3.6.1.4.1.2011.6.128.1.1.4.45 | TablehwGponTDMPortStatisticTable | not-accessible | current | This is the E1 perform monitor statistic table. The index of this table is a combination of ifIndex, hwGponTDMPortStatisticOntIndex, hwGponTDMPortStatisticOntP… |
| 1.3.6.1.4.1.2011.6.128.1.1.4.45.1 | RowhwGponTDMPortStatisticEntry | not-accessible | current | This is the E1 perform monitor statistic table. The index of this entry is a combination of ifIndex, hwGponTDMPortStatisticOntIndex, hwGponTDMPortStatisticOntP… |
| 1.3.6.1.4.1.2011.6.128.1.1.4.45.1.1 | ColumnhwGponTDMPortStatisticOntIndex | not-accessible | current | This object indicates the ONT index. |
| 1.3.6.1.4.1.2011.6.128.1.1.4.45.1.2 | ColumnhwGponTDMPortStatisticOntPhyType | not-accessible | current | This object indicates the port type of the ONT. |
| 1.3.6.1.4.1.2011.6.128.1.1.4.45.1.3 | ColumnhwGponTDMPortStatisticOntPhyIndex | not-accessible | current | This object indicates the port index of the ONT. |
| 1.3.6.1.4.1.2011.6.128.1.1.4.45.1.4 | ColumnhwGponTDMPortStatisticDataES | read-only | current | This object indicates the statistic of the errored seconds. |
| 1.3.6.1.4.1.2011.6.128.1.1.4.45.1.5 | ColumnhwGponTDMPortStatisticDataSES | read-only | current | This object indicates the statistic of the serverly erroeds. |
| 1.3.6.1.4.1.2011.6.128.1.1.4.45.1.6 | ColumnhwGponTDMPortStatisticDataUAS | read-only | current | This object indicates the statistic of the unavailable seconds. |
| 1.3.6.1.4.1.2011.6.128.1.1.4.45.1.7 | ColumnhwGponTDMPortStatisticDataEFS | read-only | current | This object indicates the statistic of the error free Seconds. |
| 1.3.6.1.4.1.2011.6.128.1.1.4.45.1.20 | ColumnhwGponTDMPortStatisticClear | read-write | current | This object is used to clear the statistics. Options: 1. clear(1) - Indicates that clear the statistics 2. invalid(-1) - Indicates that the query fails or no i… |
| 1.3.6.1.4.1.2011.6.128.1.1.4.46 | TablehwEponOntLineQualityStatisticTable | not-accessible | current | This table is used to query or clear the statistics for the EPON line quality. The index of this table is a combination of ifIndex and hwEponDeviceOntIndex. |
| 1.3.6.1.4.1.2011.6.128.1.1.4.46.1 | RowhwEponOntLineQualityStatisticEntry | not-accessible | current | This table is used to query or clear the statistics for the EPON line quality. The index of this entry is a combination of ifIndex and hwEponDeviceOntIndex. |
| 1.3.6.1.4.1.2011.6.128.1.1.4.46.1.1 | ColumnhwEponOntLineQualityStatisticFCSError | read-only | current | This object indicates the number of queried FCS error frames. |
| 1.3.6.1.4.1.2011.6.128.1.1.4.46.1.2 | ColumnhwEponOntLineQualityStatisticLineCodeError | read-only | current | This object indicates the number of queried line coding error frames. |
| 1.3.6.1.4.1.2011.6.128.1.1.4.46.1.3 | ColumnhwEponOntLineQualityStatisticFrameLengthInrangeError | read-only | current | This object indicates the number of error frames whose frames lengths are not within a valid range. |
| 1.3.6.1.4.1.2011.6.128.1.1.4.46.1.4 | ColumnhwEponOntLineQualityStatisticLLIDMismatchError | read-only | current | This object indicates the number of queried error frames whose LLIDs are mismatched. |
| 1.3.6.1.4.1.2011.6.128.1.1.4.46.1.5 | ColumnhwEponOntLineQualityStatisticclear | read-write | current | This object is used to clear the statistics. Options: 1. clear(1) - Indicates that clear the statistics 2. invalid(-1) - Indicates that the query fails or no i… |
| 1.3.6.1.4.1.2011.6.128.1.1.4.47 | TablehwEponOltChannelEthernetStatisticTable | not-accessible | current | The OLT channel ETH statisitcs table. The index of this table is a combination of ifIndex and hwEponOltChannelId. |
| 1.3.6.1.4.1.2011.6.128.1.1.4.47.1 | RowhwEponOltChannelEthernetStatisticEntry | not-accessible | current | The OLT channel ETH statisitcs table. The index of this entry is a combination of ifIndex and hwEponOltChannelId. |
| 1.3.6.1.4.1.2011.6.128.1.1.4.47.1.1 | ColumnhwEponOltChannelId | not-accessible | current | This object indicates the channel number. Options: 1. oneGbitChannel(1) - Indicates that the channel number is 1G 2. tenGbitChannel(2) - Indicates that the cha… |
| 1.3.6.1.4.1.2011.6.128.1.1.4.47.1.2 | ColumnhwEponOltChannelEthernetStatisticRcvOctets | read-only | current | This object indicates the received octets. |
| 1.3.6.1.4.1.2011.6.128.1.1.4.47.1.3 | ColumnhwEponOltChannelEthernetStatisticRcvFrames | read-only | current | This object indicates the received frames. |
| 1.3.6.1.4.1.2011.6.128.1.1.4.47.1.4 | ColumnhwEponOltChannelEthernetStatisticRcvBroadcastFrames | read-only | current | This object indicates the received broadcast frames. |
| 1.3.6.1.4.1.2011.6.128.1.1.4.47.1.5 | ColumnhwEponOltChannelEthernetStatisticRcvMulticastFrames | read-only | current | This object indicates the received multicast frames. |
| 1.3.6.1.4.1.2011.6.128.1.1.4.47.1.6 | ColumnhwEponOltChannelEthernetStatisticRcvUnicastFrames | read-only | current | This object indicates the received unicast frames. |
| 1.3.6.1.4.1.2011.6.128.1.1.4.47.1.7 | ColumnhwEponOltChannelEthernetStatisticRcvOversizeFrames | read-only | current | This object indicates the received oversize frames. |
| 1.3.6.1.4.1.2011.6.128.1.1.4.47.1.8 | ColumnhwEponOltChannelEthernetStatisticRcvUndersizeFrames | read-only | current | This object indicates the received undersize frames. |
| 1.3.6.1.4.1.2011.6.128.1.1.4.47.1.9 | ColumnhwEponOltChannelEthernetStatisticRcvCrcErrorFrames | read-only | current | This object indicates the received CRC error frames. |
| 1.3.6.1.4.1.2011.6.128.1.1.4.47.1.10 | ColumnhwEponOltChannelEthernetStatisticRcvLlidErrorFrames | read-only | current | This object indicates the received LLID error frames. |
| 1.3.6.1.4.1.2011.6.128.1.1.4.47.1.11 | ColumnhwEponOltChannelEthernetStatisticRcvUngrantedFrames | read-only | current | This object indicates the received ungranted frames. |
| 1.3.6.1.4.1.2011.6.128.1.1.4.47.1.12 | ColumnhwEponOltChannelEthernetStatisticSendOctets | read-only | current | This object indicates the sent octets. |
| 1.3.6.1.4.1.2011.6.128.1.1.4.47.1.13 | ColumnhwEponOltChannelEthernetStatisticSendFrames | read-only | current | This object indicates the sent frames. |
| 1.3.6.1.4.1.2011.6.128.1.1.4.47.1.14 | ColumnhwEponOltChannelEthernetStatisticSendBroadcastFrames | read-only | current | This object indicates the sent broadcast frames. |
| 1.3.6.1.4.1.2011.6.128.1.1.4.47.1.15 | ColumnhwEponOltChannelEthernetStatisticSendMulticastFrames | read-only | current | This object indicates the sent multicast frames. |
| 1.3.6.1.4.1.2011.6.128.1.1.4.47.1.16 | ColumnhwEponOltChannelEthernetStatisticSendUnicastFrames | read-only | current | This object indicates the sent unicast frames. |
| 1.3.6.1.4.1.2011.6.128.1.1.5 | NodehwXponDeviceLoopbackObjects | |||
| 1.3.6.1.4.1.2011.6.128.1.1.5.1 | TablehwGponDeviceGemLoopbackTable | not-accessible | current | This is the GEM port loopback table. This table is used to configure and query the GEM port loopack. The index of this table is a combination of ifIndex, hwGpo… |
| 1.3.6.1.4.1.2011.6.128.1.1.5.1.1 | RowhwGponDeviceGemLoopbackEntry | not-accessible | current | This is the GEM port loopback table. This table is used to configure and query the GEM port loopack. The index of this entry is a combination of ifIndex, hwGpo… |
| 1.3.6.1.4.1.2011.6.128.1.1.5.1.1.1 | ColumnhwGponGemOltLoopbackType | read-write | current | This object indicates the type of OLT GEM port loopback. Options: 1. noloopback(1) - No Loopback 2. oltremoteinnerloopback(2) - From OLT GEM port to OLT NNI 3.… |
| 1.3.6.1.4.1.2011.6.128.1.1.5.1.1.2 | ColumnhwGponGemOntLoopbackType | read-write | current | This object indicates the type of ONT GEM port loopback. Options: 1. noloopback(1) - No Loopback 2. ontremoteinnerloopback(2) - From ONT GEM port to OLT NNI 3.… |
| 1.3.6.1.4.1.2011.6.128.1.1.5.2 | TablehwXponDeviceOntUniLoopbackTable | not-accessible | current | This is the ONT UNI loopback table. This table is used to configure and query the ONT UNI loopack. The index of this table is a combination of ifIndex, hwXponD… |
| 1.3.6.1.4.1.2011.6.128.1.1.5.2.1 | RowhwXponDeviceOntUniLoopbackEntry | not-accessible | current | This is the ONT UNI loopback table. This table is used to configure and query the ONT UNI loopack. The index of this entry is a combination of ifIndex, hwXponD… |
| 1.3.6.1.4.1.2011.6.128.1.1.5.2.1.1 | ColumnhwXponOntUniPhyType | not-accessible | current | This object indicates the physical type of ONT UNI. Options: 1. t1(13) - T1 2. e1(14) - E1 3. fe(24) - FE 4. ge(34) - GE 5. vdsl(37) - VDSL 6. moca(46) - MOCA … |
| 1.3.6.1.4.1.2011.6.128.1.1.5.2.1.2 | ColumnhwXponOntUniPhyIndex | not-accessible | current | This object indicates the physical Index of ONT UNI. |
| 1.3.6.1.4.1.2011.6.128.1.1.5.2.1.3 | ColumnhwXponOntUniLoopbackType | read-write | current | This object indicates the type of ONT UNI loopback. Options: 1. noloopback(1) - No Loopback 2. remoteinnerloopback(2) - From ONT UNI to OLT NNI 3. remoteouterl… |
| 1.3.6.1.4.1.2011.6.128.1.1.5.3 | TablehwXponDeviceOltLoopbackTable | not-accessible | current | This is the OLT loopback table. This table is used to configure and query the loopack based on OLT. The index of this table is ifIndex. |
| 1.3.6.1.4.1.2011.6.128.1.1.5.3.1 | RowhwXponDeviceOltLoopbackEntry | not-accessible | current | This is the OLT loopback table. This table is used to configure and query the loopack based on OLT. The index of this entry is ifIndex. |
| 1.3.6.1.4.1.2011.6.128.1.1.5.3.1.1 | ColumnhwXponOltInnerLoopback | read-write | current | This object indicates the switch of OLT PON interface inner loopback. inner loopback: From OLT interface to NNI. Options: 1. disable(1) - Disable the switch of… |
| 1.3.6.1.4.1.2011.6.128.1.1.5.3.1.2 | ColumnhwXponOltOuterLoopback | read-write | current | This object indicates the switch of OLT PON interface outer loopback. outer-loopback: From OLT interface to ONT UNI. Options: 1. disable(1) - Disable the switc… |
| 1.3.6.1.4.1.2011.6.128.1.1.5.4 | TablehwXponDeviceOntExtLoopbackTable | not-accessible | current | This is the ONT extend loopback table. This table is used to configure and query the loopack based on the whole ONT. The index of this table is a combination o… |
| 1.3.6.1.4.1.2011.6.128.1.1.5.4.1 | RowhwXponDeviceOntExtLoopbackEntry | not-accessible | current | This is the ONT extend loopback table. This table is used to configure and query the loopack based on the whole ONT. The index of this entry is a combination o… |
| 1.3.6.1.4.1.2011.6.128.1.1.5.4.1.1 | ColumnhwXponOntNniInnerLoopback | read-write | current | This object indicates the switch of ONT NNI inner loopback. inner loopback: From ONT NNI to OLT. Options: 1. disable(1) - Disable the switch of ONT NNI inner l… |
| 1.3.6.1.4.1.2011.6.128.1.1.5.4.1.2 | ColumnhwXponOntTdmLocalInnerLoopback | read-write | current | This object indicates the switch of ONT TDM local inner loopback. Local inner loopback: From ONT to ONT UNI. Options: 1. disable(1) - Disable the switch of ONT… |
| 1.3.6.1.4.1.2011.6.128.1.1.5.4.1.3 | ColumnhwXponOntTdmLocalOuterLoopback | read-write | current | This object indicates the Switch of ONT TDM local outer loopback. Local outer loopback: From ONT to OLT. Options: 1. disable(1) - Disable the switch of ONT TDM… |
| 1.3.6.1.4.1.2011.6.128.1.1.6 | NodehwXponDeviceLineTestObjects | |||
| 1.3.6.1.4.1.2011.6.128.1.1.6.1 | TablehwGponDeviceGemLineTestTable | not-accessible | current | This is the GEM port line test table. This table is used to do line testing from OLT to ONT GEM port. The index of this table is a combination of ifIndex, hwGp… |
| 1.3.6.1.4.1.2011.6.128.1.1.6.1.1 | RowhwGponDeviceGemLineTestEntry | not-accessible | current | This is the GEM port line test table. This table is used to do line testing from OLT to ONT GEM port. The index of this entry is a combination of ifIndex, hwGp… |
| 1.3.6.1.4.1.2011.6.128.1.1.6.1.1.1 | ColumnhwGponGemLineTestFrameLength | read-write | current | This object indicates the frame length of GEM port line test. Range: 64-1518. If the value of the ACCESS clause is 'write-only', then the value of the MAX-ACCE… |
| 1.3.6.1.4.1.2011.6.128.1.1.6.1.1.2 | ColumnhwGponGemLineTestFramesTxNum | read-write | current | This object indicates the number of GEM port line test frames sending. Range: 5-100. If the value of the ACCESS clause is 'write-only', then the value of the M… |
| 1.3.6.1.4.1.2011.6.128.1.1.6.1.1.3 | ColumnhwGponGemLineTestFramesRxNum | read-only | current | This object indicates the number of GEM port line test frames receiving. Range: 0-100. |
| 1.3.6.1.4.1.2011.6.128.1.1.6.2 | TablehwXponDeviceOntUniLineTestTable | not-accessible | current | This is the ONT UNI line test table. This table is used to do line testing from OLT to ONT UNI. The index of this table is a combination of ifIndex, hwXponDevi… |
| 1.3.6.1.4.1.2011.6.128.1.1.6.2.1 | RowhwXponDeviceOntUniLineTestEntry | not-accessible | current | This is the ONT UNI line test table. This table is used to do line testing from OLT to ONT UNI. The index of this entry is a combination of ifIndex, hwXponDevi… |
| 1.3.6.1.4.1.2011.6.128.1.1.6.2.1.1 | ColumnhwXponOntUniLineTestFrameLength | read-write | current | This object indicates the frame length of ONT UNI line test. Range: 64-1518. If the value of the ACCESS clause is 'write-only', then the value of the MAX-ACCES… |
| 1.3.6.1.4.1.2011.6.128.1.1.6.2.1.2 | ColumnhwXponOntUniLineTestFramesTxNum | read-write | current | This object indicates the number of ONT UNI line test frames sending. Range: 5-100. If the value of the ACCESS clause is 'write-only', then the value of the MA… |
| 1.3.6.1.4.1.2011.6.128.1.1.6.2.1.3 | ColumnhwXponOntUniLineTestSrvFlowIndex | read-write | current | This object indicates the service-port index of ONT UNI line test flow. Range: 1-32768. If the value of the ACCESS clause is 'write-only', then the value of th… |
| 1.3.6.1.4.1.2011.6.128.1.1.6.2.1.4 | ColumnhwXponOntUniLineTestFramesRxNum | read-only | current | This object indicates the number of ONT UNI line test frames receiving. Range: 0-100. |
| 1.3.6.1.4.1.2011.6.128.1.1.6.3 | TablehwXponDeviceOntNniLineTestTable | not-accessible | current | This is the ONT NNI line test table. This table is used to do line testing from OLT to ONT NNI. The index of this table is a combination of ifIndex and hwXponD… |
| 1.3.6.1.4.1.2011.6.128.1.1.6.3.1 | RowhwXponDeviceOntNniLineTestEntry | not-accessible | current | This is the ONT NNI line test table. This table is used to do line testing from OLT to ONT NNI. The index of this entry is a combination of ifIndex and hwXponD… |
| 1.3.6.1.4.1.2011.6.128.1.1.6.3.1.1 | ColumnhwXponOntNniLineTestFrameLength | read-write | current | This object indicates the frame length of ONT NNI line test. Range: 64-1518. If the value of the ACCESS clause is 'write-only', then the value of the MAX-ACCES… |
| 1.3.6.1.4.1.2011.6.128.1.1.6.3.1.2 | ColumnhwXponOntNniLineTestFramesTxNum | read-write | current | This object indicates the number of ONT NNI line test frames sending. Range: 5-100. If the value of the ACCESS clause is 'write-only', then the value of the MA… |
| 1.3.6.1.4.1.2011.6.128.1.1.6.3.1.3 | ColumnhwXponOntNniLineTestFramesRxNum | read-only | current | This object indicates the number of ONT NNI line test frames receiving. Range: 0-100. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| HwXponDynamicMacQueryPara | Integer32 | current | Reserved parameter. |
| HwXponDynamicMacQueryType | INTEGER { xponOntPortInSpecVlan(1), xponOntInSpecPort(2), xponInSpecOnt(3), xponOntInSpecWlan(4) } | current | The value is quering index; if no index, th value is -1. For example, if the value is XponOntPortInSpecVlan(1), the value of ifIndex, hwXponDynamicMacVlanId, hwXponDynamicMacIndex, hwXponDynamicMacQueryPara0, hwXponDyna… |
| OntList | OCTET STRING | current | Each octet within this value specifies a set of eight onts, with the first octet specifying ports 0 through 7, the second octet specifying ports 8 through 15 and others. Within each octet, the most significant bit repre… |
| PortList | OCTET STRING | current | Each octet within this value specifies a set of eight ports, with the first octet specifying ports 1 through 8, the second octet specifying ports 9 through 16 and others. Within each octet, the most significant bit repr… |
| VlanIndex | Unsigned32 | current | A value used to index per-VLAN tables: values of 0 and 4095 are not permitted; if the value is between 1 and 4094 inclusive, it represents an IEEE 802.1Q VLAN-ID with global scope within a given bridged domain (see Vlan… |