HWMUSA-SIGTRAN-MIB
200 objects
This MIB module defines MIB objects which provides SIGTRAN management.
Imported Objects
| HUAWEI-MIB | ias |
| SNMPv2-CONF | MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-SMI | Integer32 IpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE private Unsigned32 |
| SNMPv2-TC | DateAndTime DisplayString RowStatus TEXTUAL-CONVENTION |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2011.2.6.7.6 | NodehwIASSigtran | |||
| 1.3.6.1.4.1.2011.2.6.7.6.1 | IdentityhwIASSigtranObjects | This MIB module defines MIB objects which provides SIGTRAN management. | ||
| 1.3.6.1.4.1.2011.2.6.7.6.1.1 | TablehwL2uaLinkSetMngtTable | not-accessible | current | This table is used to config L2UA linkset. The index of this table is hwL2uaLinkSetNo. |
| 1.3.6.1.4.1.2011.2.6.7.6.1.1.1 | RowhwL2uaLinkSetMngtEntry | not-accessible | current | This table is used to config L2UA linkset. The index of this entry is hwL2uaLinkSetNo. |
| 1.3.6.1.4.1.2011.2.6.7.6.1.1.1.1 | ColumnhwL2uaLinkSetNo | not-accessible | current | The link set number |
| 1.3.6.1.4.1.2011.2.6.7.6.1.1.1.2 | ColumnhwL2uaLinkSetProtocolType | read-write | current | Protocol type. Options: 1. iua(1) -indicates that the Protocol type is IUA 2. m2ua(2) -indicates that that the Protocol type is M2UA 3. v5ua(5) -indicates that… |
| 1.3.6.1.4.1.2011.2.6.7.6.1.1.1.3 | ColumnhwL2uaLinkSetPendingTime | read-write | current | The pending time of the link set (the last active link in the link set switches to another state. During the pending time length, if no link in the link set sw… |
| 1.3.6.1.4.1.2011.2.6.7.6.1.1.1.4 | ColumnhwL2uaLinkSetTrafficMode | read-write | current | The working mode of the link set. Options: 1. override(1) -indicates that the working mode of the link set is override 2. loadshare(2) -indicates that the work… |
| 1.3.6.1.4.1.2011.2.6.7.6.1.1.1.5 | ColumnhwL2uaLinkSetCSMode | read-write | current | C/S mode of the link set. Options: 1. client(1) -indicates that the C/S mode of the link set is Client 2. server(2) -indicates that the C/S mode of the link se… |
| 1.3.6.1.4.1.2011.2.6.7.6.1.1.1.6 | ColumnhwL2uaLinkSetIIDType | read-only | current | Type of the interface ID. Options: 1. integer(1) -integer 2. text(2) -text |
| 1.3.6.1.4.1.2011.2.6.7.6.1.1.1.7 | ColumnhwL2uaLinkSetLinkNum | read-only | current | The number of links in the link set |
| 1.3.6.1.4.1.2011.2.6.7.6.1.1.1.8 | ColumnhwL2uaLinkSetOperState | read-only | current | Status of the link set. Options: 1. down(1) -indicates that the Status of the link set is down 2. inactive(2) -indicates that the Status of the link set is ina… |
| 1.3.6.1.4.1.2011.2.6.7.6.1.1.1.9 | ColumnhwL2uaLinkSetRowStatus | read-write | current | Row status |
| 1.3.6.1.4.1.2011.2.6.7.6.1.1.1.10 | ColumnhwL2uaLinkSetMgId | read-write | current | MG interface ID. -1 means this parameter is not configured. |
| 1.3.6.1.4.1.2011.2.6.7.6.1.1.1.11 | ColumnhwL2uaLinkSetIidMap | read-write | current | InterfaceID generation mode. 1:generated by user input,use format:interfaceID 2:generated automatically,use format:ffsspp, ff-shelf number,ss-slot number, pp-p… |
| 1.3.6.1.4.1.2011.2.6.7.6.1.1.1.12 | ColumnhwL2uaLinkSetJointlyWork | read-write | current | IUA link joint work with MGC. Options: 1.enable(1) -support IUA Link joint work with MGC 2.disable(2) -not support IUA Link joint work with MGC It must config … |
| 1.3.6.1.4.1.2011.2.6.7.6.1.1.1.13 | ColumnhwL2uaLinkSetIidPrefix | read-write | current | Indicates the prefix of IID.The prefix is not allowed to contain the character:';'':'',' |
| 1.3.6.1.4.1.2011.2.6.7.6.1.1.1.14 | ColumnhwL2uaLinkSetIidBraPrefix | read-write | current | Indicates the bra prefix of IID.The prefix is not allowed to contain the character:';'':'',' |
| 1.3.6.1.4.1.2011.2.6.7.6.1.1.1.15 | ColumnhwL2uaLinkSetIidBraSuffix | read-write | current | Indicates the bra suffix of IID.The suffix is not allowed to contain the character:';'':'',' |
| 1.3.6.1.4.1.2011.2.6.7.6.1.1.1.16 | ColumnhwL2uaLinkSetIidPraPrefix | read-write | current | Indicates the pra prefix of IID.The prefix is not allowed to contain the character:';'':'',' |
| 1.3.6.1.4.1.2011.2.6.7.6.1.1.1.17 | ColumnhwL2uaLinkSetIidPrasuffix | read-write | current | Indicates the pra suffix of IID.The suffix is not allowed to contain the character:';'':'',' |
| 1.3.6.1.4.1.2011.2.6.7.6.1.2 | TablehwL2uaLinkMngtTable | not-accessible | current | This table is used to config L2UA link. The index of this table is hwL2uaLinkNo. |
| 1.3.6.1.4.1.2011.2.6.7.6.1.2.1 | RowhwL2uaLinkMngtEntry | not-accessible | current | This table is used to config L2UA link. The index of this entry is hwL2uaLinkNo. |
| 1.3.6.1.4.1.2011.2.6.7.6.1.2.1.1 | ColumnhwL2uaLinkNo | accessible-for-notify | current | Link No. |
| 1.3.6.1.4.1.2011.2.6.7.6.1.2.1.2 | ColumnhwL2uaLinkLinkSetNo | read-write | current | Link set No. |
| 1.3.6.1.4.1.2011.2.6.7.6.1.2.1.3 | ColumnhwL2uaLinkLocalPort | read-write | current | Local port number |
| 1.3.6.1.4.1.2011.2.6.7.6.1.2.1.4 | ColumnhwL2uaLinkLocalIpaddr | read-write | current | Local IP address |
| 1.3.6.1.4.1.2011.2.6.7.6.1.2.1.5 | ColumnhwL2uaLinkRemotePort | read-write | current | Remote port number |
| 1.3.6.1.4.1.2011.2.6.7.6.1.2.1.6 | ColumnhwL2uaLinkRemoteIpaddr1 | read-write | current | Remote IP address 1 |
| 1.3.6.1.4.1.2011.2.6.7.6.1.2.1.7 | ColumnhwL2uaLinkRemoteIpaddr2 | read-write | current | Remote IP address 2 |
| 1.3.6.1.4.1.2011.2.6.7.6.1.2.1.8 | ColumnhwL2uaLinkMaxInStreamNum | read-write | current | Maximum number of inbound streams. -1 means the IUA link is configurated with DHCP but the vlan IP isn't gained by DHCP. |
| 1.3.6.1.4.1.2011.2.6.7.6.1.2.1.9 | ColumnhwL2uaLinkMaxOutStreamNum | read-write | current | Maximum number of outbound streams. -1 means the IUA link is configurated with DHCP but the vlan IP isn't gained by DHCP. |
| 1.3.6.1.4.1.2011.2.6.7.6.1.2.1.10 | ColumnhwL2uaLinkActiveStandbyFlag | read-only | current | Active and standby flag. Options: 1. active(1)-indicates that the Active and standby flag is active 2. standby(2)-indicates that the Active and standby flag is… |
| 1.3.6.1.4.1.2011.2.6.7.6.1.2.1.11 | ColumnhwL2uaLinkLockFlag | read-write | current | IUA Link maintenance lock flag. Options: 1. lock(1)-indicates that the IUA Link maintenance lock flag is active 2. unlock(2)-indicates that the IUA Link mainte… |
| 1.3.6.1.4.1.2011.2.6.7.6.1.2.1.12 | ColumnhwL2uaLinkUsedInStreamNum | read-only | current | Number of inbound streams used currently -1 indicates that the number is invalid |
| 1.3.6.1.4.1.2011.2.6.7.6.1.2.1.13 | ColumnhwL2uaLinkUsedOutStreamNum | read-only | current | Number of outbound streams used currently -1 indicates that the number is invalid |
| 1.3.6.1.4.1.2011.2.6.7.6.1.2.1.14 | ColumnhwL2uaLinkSctpAssocId | read-only | current | SCTP association ID that the L2UA link corresponds to -1 means there is no SCTP association. |
| 1.3.6.1.4.1.2011.2.6.7.6.1.2.1.15 | ColumnhwL2uaLinkOperState | read-only | current | Link status. Options: 1. unestablish(1)-indicates that the Link status is active 2. establish(2)-indicates that the Link status is standby 3. inactive(3)-indic… |
| 1.3.6.1.4.1.2011.2.6.7.6.1.2.1.16 | ColumnhwL2uaLinkCongestState | read-only | current | Congestion state. Options: 1. uncongest(1) -not congested 2. congest(2) -congested 3. null(-1) -null Display -1 when the vlanid can't get Local IP in dhcp mode. |
| 1.3.6.1.4.1.2011.2.6.7.6.1.2.1.17 | ColumnhwL2uaLinkMaintainOper | read-write | current | Link maintenance operation. Options: 1. lock(1) -indicates that the link maintenance operation is Lock 2. unlock(2) -indicates that the link maintenance operat… |
| 1.3.6.1.4.1.2011.2.6.7.6.1.2.1.18 | ColumnhwL2uaLinkRowStatus | read-write | current | Row status |
| 1.3.6.1.4.1.2011.2.6.7.6.1.2.1.19 | ColumnhwL2uaLinkWithMedGwyCtrlIdx | read-write | current | Config IUA Link jiont work with witch MGC. 0: Primary MGC. 1: Secondary MGC. -1 means this parameter is not configed. |
| 1.3.6.1.4.1.2011.2.6.7.6.1.2.1.20 | ColumnhwL2uaLinkPriority | read-write | current | Is available when the working mode of the link set is Load-share. In Over ride mode, this parameter can be read, but no use. Default:0 |
| 1.3.6.1.4.1.2011.2.6.7.6.1.2.1.21 | ColumnhwL2uaLinkLockStatus | read-only | current | IUA Link current Lock State: Options: 1. unlock(1)-indicates that the Current IUA Link not locked 2. servicelock(2)-indicates that the Current IUA Link was loc… |
| 1.3.6.1.4.1.2011.2.6.7.6.1.2.1.22 | ColumnhwL2uaLinkLocalIpaddrDhcpClientIndex | read-write | current | Dhcp L2ua vlan id. The valid value is 1..4093,if the value is -1, the static signal ip will be used. |
| 1.3.6.1.4.1.2011.2.6.7.6.1.2.1.23 | ColumnhwL2uaLinkLocalIpDnyAddrName | read-write | current | Dynamic local IP name. |
| 1.3.6.1.4.1.2011.2.6.7.6.1.7 | TablehwSctpAssocStatTable | not-accessible | current | This table is used to query statistic of a SCTP association. The index of this table is hwSctpAssocStatAssocId. |
| 1.3.6.1.4.1.2011.2.6.7.6.1.7.1 | RowhwSctpAssocStatEntry | not-accessible | current | This table is used to query statistic of a SCTP association. The index of this entry is hwSctpAssocStatAssocId. |
| 1.3.6.1.4.1.2011.2.6.7.6.1.7.1.1 | ColumnhwSctpAssocStatAssocId | not-accessible | current | SCTP association ID Constructed by Protocol-Type, MGC-index/Proxy-index, IUA-Link-ID/H248-Interface-ID/SIP-Interface-ID; Format:xyzzzzzz(Hex) a) x for Protocol… |
| 1.3.6.1.4.1.2011.2.6.7.6.1.7.1.2 | ColumnhwSctpAssocStatT1Expired | read-only | current | The expired times of the T1 timer |
| 1.3.6.1.4.1.2011.2.6.7.6.1.7.1.3 | ColumnhwSctpAssocStatT2Expired | read-only | current | The expired times of the T2 timer |
| 1.3.6.1.4.1.2011.2.6.7.6.1.7.1.4 | ColumnhwSctpAssocStatRetransChunks | read-only | current | The number of retransmitted data chunks |
| 1.3.6.1.4.1.2011.2.6.7.6.1.7.1.5 | ColumnhwSctpAssocStatSendDataChunks | read-only | current | The number of transmitted data chunks. |
| 1.3.6.1.4.1.2011.2.6.7.6.1.7.1.6 | ColumnhwSctpAssocStatRevDataChunks | read-only | current | The number of received data chunks |
| 1.3.6.1.4.1.2011.2.6.7.6.1.7.1.7 | ColumnhwSctpAssocStatRecPackets | read-only | current | The number of received SCTP packets |
| 1.3.6.1.4.1.2011.2.6.7.6.1.7.1.8 | ColumnhwSctpAssocStatRecErrPackets | read-only | current | The number of received error SCTP packets |
| 1.3.6.1.4.1.2011.2.6.7.6.1.7.1.9 | ColumnhwSctpAssocStatOperStatus | read-write | current | Clearing the statistics of the associations. Options: 1. clear(1) -clear |
| 1.3.6.1.4.1.2011.2.6.7.6.1.7.1.10 | ColumnhwSctpAssocStatSentSctpPackets | read-only | current | The number of the transmitted SCTP packets |
| 1.3.6.1.4.1.2011.2.6.7.6.1.8 | NodehwSctpGlobalStatTable | |||
| 1.3.6.1.4.1.2011.2.6.7.6.1.8.1 | ScalarhwSctpGlobalStatAssocCurEstab | read-only | current | The number of current associations |
| 1.3.6.1.4.1.2011.2.6.7.6.1.8.2 | ScalarhwSctpGlobalStatAssocActEstab | read-only | current | The number of associations initiated by the local end |
| 1.3.6.1.4.1.2011.2.6.7.6.1.8.3 | ScalarhwSctpGlobalStatAssocPassiveEstab | read-only | current | The number of associations initiated by the remote end |
| 1.3.6.1.4.1.2011.2.6.7.6.1.8.4 | ScalarhwSctpGlobalStatAssocActFail | read-only | current | The number of failure associations initiated by the local end |
| 1.3.6.1.4.1.2011.2.6.7.6.1.8.5 | ScalarhwSctpGlobalStatAssocPassiveFail | read-only | current | The number of failure associations initiated by the remote end |
| 1.3.6.1.4.1.2011.2.6.7.6.1.8.6 | ScalarhwSctpGlobalStatAssocAborted | read-only | current | The number of abort associations |
| 1.3.6.1.4.1.2011.2.6.7.6.1.8.7 | ScalarhwSctpGlobalStatAssocShutdown | read-only | current | The number of shutdown associations |
| 1.3.6.1.4.1.2011.2.6.7.6.1.8.8 | ScalarhwSctpGlobalStatRecOotb | read-only | current | The number of received abnormal data chunks at the local end |
| 1.3.6.1.4.1.2011.2.6.7.6.1.8.9 | ScalarhwSctpGlobalStatSendCtrlChunks | read-only | current | The number of transmitted control data chunks |
| 1.3.6.1.4.1.2011.2.6.7.6.1.8.10 | ScalarhwSctpGlobalStatSendOrderChunks | read-only | current | The number of transmitted ordered data chunks |
| 1.3.6.1.4.1.2011.2.6.7.6.1.8.11 | ScalarhwSctpGlobalStatSendUnorderChunks | read-only | current | The number of transmitted unordered data chunks |
| 1.3.6.1.4.1.2011.2.6.7.6.1.8.12 | ScalarhwSctpGlobalStatRecCtrlChunks | read-only | current | The number of received control data chunks |
| 1.3.6.1.4.1.2011.2.6.7.6.1.8.13 | ScalarhwSctpGlobalStatRecOrderChunks | read-only | current | The number of received ordered data chunks |
| 1.3.6.1.4.1.2011.2.6.7.6.1.8.14 | ScalarhwSctpGlobalStatRecUnorderChunks | read-only | current | The number of received unordered data chunks |
| 1.3.6.1.4.1.2011.2.6.7.6.1.8.15 | ScalarhwSctpGlobalStatRetransDataChunks | read-only | current | The number of retransmitted data chunks |
| 1.3.6.1.4.1.2011.2.6.7.6.1.8.16 | ScalarhwSctpGlobalStatFragmentedUsrMsgs | read-only | current | The number of fragmented user messages |
| 1.3.6.1.4.1.2011.2.6.7.6.1.8.17 | ScalarhwSctpGlobalStatReassembledUsrMsgs | read-only | current | The number of reassembled user messages |
| 1.3.6.1.4.1.2011.2.6.7.6.1.8.18 | ScalarhwSctpGlobalStatChecksumErrors | read-only | current | The number of received checksum error packets |
| 1.3.6.1.4.1.2011.2.6.7.6.1.8.19 | ScalarhwSctpGlobalStatSentSctpPacks | read-only | current | The number of the transmitted SCTP packets |
| 1.3.6.1.4.1.2011.2.6.7.6.1.8.20 | ScalarhwSctpGlobalStatRecvSctpPacks | read-only | current | The number of the received SCTP packets |
| 1.3.6.1.4.1.2011.2.6.7.6.1.8.21 | ScalarhwSctpGlobalStatAdminStatus | read-write | current | Clearing the system statistics. Options: 1. clear(1) -clear |
| 1.3.6.1.4.1.2011.2.6.7.6.1.9 | NodehwSctpParaTable | |||
| 1.3.6.1.4.1.2011.2.6.7.6.1.9.1 | ScalarhwSctpParaRtoMin | read-only | current | The minimum RTO. To the UA5000R15C05, this leaf can be read and written, the value range is (10..5000). To other products, this leaf just can be read, the defa… |
| 1.3.6.1.4.1.2011.2.6.7.6.1.9.2 | ScalarhwSctpParaRtoMax | read-write | current | The maximum RTO. For Mg interface, default value 3000. For Iua-Link, default value 60000. To the UA5000R15C05, the value range is (200..120000). To other produ… |
| 1.3.6.1.4.1.2011.2.6.7.6.1.9.3 | ScalarhwSctpParaRtoInit | read-write | current | The initial RTO. To the UA5000R15C05, the value range is (10..120000), the default value is 100. To other products, the value range is (1000..6000), the defaul… |
| 1.3.6.1.4.1.2011.2.6.7.6.1.9.4 | ScalarhwSctpParaValidCookieLife | read-write | current | Cookie lifecycle. To the UA5000R15C05, the value range is (5000..120000). To other products, the value range is (30000..120000). Default: 60000 Unit: milliseco… |
| 1.3.6.1.4.1.2011.2.6.7.6.1.9.5 | ScalarhwSctpParaMaxInitRetrans | read-write | current | The maximum retransmit attempts of INIT To the UA5000R15C05, the value range is (1..10). To other products, the value range is (3..10). Default: 6 |
| 1.3.6.1.4.1.2011.2.6.7.6.1.9.6 | ScalarhwSctpParaRtoAlpha | read-write | current | Parameter of RTO Alpha To the UA5000R15C05, the default value is 13, the value range is (1..100). To other products, the default value is 12, the value range i… |
| 1.3.6.1.4.1.2011.2.6.7.6.1.9.7 | ScalarhwSctpParaRtoBeta | read-write | current | Parameter of RTO Beta To the UA5000R15C05, the value range is (1..100). To other products, the value range is (0..100). Default: 25 |
| 1.3.6.1.4.1.2011.2.6.7.6.1.9.8 | ScalarhwSctpParaAssocMaxRetrans | read-write | current | The maximum retransmit attempts in a association To the UA5000R15C05, the value range is (1..10), the default value is 8. To other products, the value range is… |
| 1.3.6.1.4.1.2011.2.6.7.6.1.9.9 | ScalarhwSctpParaPathMaxRetrans | read-write | current | The maximum Retransmit attempts in a path To the UA5000R15C05, the value range is (1..10), the default value is 8. To other products, the value range is (3..8)… |
| 1.3.6.1.4.1.2011.2.6.7.6.1.9.10 | ScalarhwSctpParaNoCongestionLevel | read-write | current | Parameter of no-congestion level To the UA5000R15C05, the value range is (1..60). To other products, the value range is (0..60). Default: 40 |
| 1.3.6.1.4.1.2011.2.6.7.6.1.9.11 | ScalarhwSctpParaLowCongestionLevel | read-write | current | Parameter of low-congestion level. Default: 60 |
| 1.3.6.1.4.1.2011.2.6.7.6.1.9.12 | ScalarhwSctpParaHighCongestionLevel | read-write | current | Parameter of high-congestion level. Default: 80 |
| 1.3.6.1.4.1.2011.2.6.7.6.1.9.13 | ScalarhwSctpParaHbInterval | read-write | current | Heartbeat interval. To the UA5000R15C05, the value range is (1000..300000), the default value is 3000. To other products, the value range is (2000..120000), th… |
| 1.3.6.1.4.1.2011.2.6.7.6.1.9.14 | ScalarhwSctpParaSendChecksum | read-write | current | Sending the checksum. Options: 1. no(1) -indicates that the checksum is not Sending 2. yes(2) -indicates that the checksum is Sending Default: 2 |
| 1.3.6.1.4.1.2011.2.6.7.6.1.9.15 | ScalarhwSctpParaRecvChecksum | read-write | current | Receiving the checksum. Options: 1. no(1) -indicates that the checksum is not Receiving 2. yes(2) -indicates that the checksum is Receiving Default: 2 |
| 1.3.6.1.4.1.2011.2.6.7.6.1.9.16 | ScalarhwSctpParaChecksumArith | read-write | current | Checksum algorithm. Options: 1. adler32(1) -indicates that Checksum algorithm is ADLER32 2. crc32(2) -indicates that Checksum algorithm is CRC32 Default: 2 |
| 1.3.6.1.4.1.2011.2.6.7.6.1.9.17 | ScalarhwSctpParaSACKPolicy | read-write | current | SACK policy: 0-NoTimer; 1-Timer; 2-Commix. Default: 2 |
| 1.3.6.1.4.1.2011.2.6.7.6.1.9.18 | ScalarhwSctpParaSACKPeriod | read-write | current | SACK period. Default: 20 Unit: millisecond |
| 1.3.6.1.4.1.2011.2.6.7.6.1.9.19 | ScalarhwSctpParaSACKFrquency | read-write | current | Parameter of SACK frequency Default: 1 |
| 1.3.6.1.4.1.2011.2.6.7.6.1.9.20 | ScalarhwSctpParaMTU | read-write | current | Parameter of MTU size. Default: 1500 |
| 1.3.6.1.4.1.2011.2.6.7.6.1.10 | NodehwL2uaVersionTable | |||
| 1.3.6.1.4.1.2011.2.6.7.6.1.10.1 | ScalarhwIuaVersionString | read-only | current | The version of the L2UA protocol |
| 1.3.6.1.4.1.2011.2.6.7.6.1.11 | NodehwSctpVersionTable | |||
| 1.3.6.1.4.1.2011.2.6.7.6.1.11.1 | ScalarhwSctpVersionString | read-only | current | SCTP version |
| 1.3.6.1.4.1.2011.2.6.7.6.1.12 | TablehwSctpAssocInfoTable | not-accessible | current | This table is used to query infomation of a SCTP association. The index of this table is hwSctpAssocId. |
| 1.3.6.1.4.1.2011.2.6.7.6.1.12.1 | RowhwSctpAssocInfoEntry | not-accessible | current | This table is used to query infomation of a SCTP association. The index of this entry is hwSctpAssocId. |
| 1.3.6.1.4.1.2011.2.6.7.6.1.12.1.1 | ColumnhwSctpAssocId | not-accessible | current | SCTP association ID Constructed by Protocol-Type, MGC-index/Proxy-index, IUA-Link-ID/H248-Interface-ID/SIP-Interface-ID; Format:xyzzzzzz(Hex) a) x for Protocol… |
| 1.3.6.1.4.1.2011.2.6.7.6.1.12.1.2 | ColumnhwSctpAssocState | read-only | current | Current status of the association Options: 1. closed(1) -indicates that the Current status of the association is closed 2. cookiewait(2) -indicates that the Cu… |
| 1.3.6.1.4.1.2011.2.6.7.6.1.12.1.3 | ColumnhwSctpAssocType | read-only | current | Association type. Options: 1. client(1) -indicates that the Association type is Client 2. server(2) -indicates that the Association type is Server |
| 1.3.6.1.4.1.2011.2.6.7.6.1.12.1.4 | ColumnhwSctpAssocApplId | read-only | current | The upper-layer user ID |
| 1.3.6.1.4.1.2011.2.6.7.6.1.12.1.5 | ColumnhwSctpAssocLocalPort | read-only | current | Local port number |
| 1.3.6.1.4.1.2011.2.6.7.6.1.12.1.6 | ColumnhwSctpAssocRemotePort | read-only | current | Remote port number |
| 1.3.6.1.4.1.2011.2.6.7.6.1.12.1.7 | ColumnhwSctpAssocLocalIPaddr | read-only | current | The current local primary IP address |
| 1.3.6.1.4.1.2011.2.6.7.6.1.12.1.8 | ColumnhwSctpAssocRemoteIPaddr | read-only | current | The current remote primary IP address |
| 1.3.6.1.4.1.2011.2.6.7.6.1.12.1.9 | ColumnhwSctpAssocAllowHB | read-only | current | Whether transmitting HB message. Options: 1. no(1) -indicates not transmitting HB message 2. yes(2) -indicates transmitting HB message Default: 2 |
| 1.3.6.1.4.1.2011.2.6.7.6.1.12.1.10 | ColumnhwSctpAssocLocalRwnd | read-only | current | The size of the local receiver window |
| 1.3.6.1.4.1.2011.2.6.7.6.1.12.1.11 | ColumnhwSctpAssocRemoteRwnd | read-only | current | The size of the remote receiver window |
| 1.3.6.1.4.1.2011.2.6.7.6.1.12.1.12 | ColumnhwSctpAssocUnfirmDataChunks | read-only | current | The size of the unacknowledged data that is transmitted |
| 1.3.6.1.4.1.2011.2.6.7.6.1.12.1.13 | ColumnhwSctpAssocRemoteIP1addr | read-only | current | Remote IP address 1. Default: 80 |
| 1.3.6.1.4.1.2011.2.6.7.6.1.12.1.14 | ColumnhwSctpAssocRemoteIP1State | read-only | current | The current status of remote IP address 1. Options: 1. active(1) -active 2. inactive(2) -inactive |
| 1.3.6.1.4.1.2011.2.6.7.6.1.12.1.15 | ColumnhwSctpAssocRemoteIP1WaitAck | read-only | current | The number of the data blocks that is waiting for the acknowledgement by the remote SACK. Default: 2 |
| 1.3.6.1.4.1.2011.2.6.7.6.1.12.1.16 | ColumnhwSctpAssocRemoteIP1Cwnd | read-only | current | The size of the congestion window. Default: 2 |
| 1.3.6.1.4.1.2011.2.6.7.6.1.12.1.17 | ColumnhwSctpAssocRemoteIP1Unfirm | read-only | current | The size of the unacknowledged data that is transmitted on the path. Default: 2 |
| 1.3.6.1.4.1.2011.2.6.7.6.1.12.1.18 | ColumnhwSctpAssocRemoteIP1Rto | read-only | current | Retransmission Time-out (ms) |
| 1.3.6.1.4.1.2011.2.6.7.6.1.12.1.19 | ColumnhwSctpAssocRemoteIP1Srtt | read-only | current | Smoothed Round-trip Time (ms) |
| 1.3.6.1.4.1.2011.2.6.7.6.1.12.1.20 | ColumnhwSctpAssocRemoteIP1Rttvar | read-only | current | Round-trip Time Variation (ms) |
| 1.3.6.1.4.1.2011.2.6.7.6.1.12.1.21 | ColumnhwSctpAssocRemoteIP1AllowHB | read-only | current | Whether HB can be transmitted from this address. Options: 1. no(1) -indicates that the HB can't be transmitted from this address 2. yes(2) -indicates that the … |
| 1.3.6.1.4.1.2011.2.6.7.6.1.12.1.22 | ColumnhwSctpAssocRemoteIP2addr | read-only | current | Remote IP address 2. Default: 80 |
| 1.3.6.1.4.1.2011.2.6.7.6.1.12.1.23 | ColumnhwSctpAssocRemoteIP2State | read-only | current | The current status of remote IP address 2 Options: 1. active(1) -indicates that the current status of remote IP address 2 is active 2. inactive(2) -indicates t… |
| 1.3.6.1.4.1.2011.2.6.7.6.1.12.1.24 | ColumnhwSctpAssocRemoteIP2WaitAck | read-only | current | The number of the data that is waiting for the acknowledgement by the remote SACK. -1 returns by GET means associate with IP2 does not exist. Default: 2 |
| 1.3.6.1.4.1.2011.2.6.7.6.1.12.1.25 | ColumnhwSctpAssocRemoteIP2Cwnd | read-only | current | The size of the congestion window. -1 returns by GET means associate with IP2 does not exist. Default: 2 |
| 1.3.6.1.4.1.2011.2.6.7.6.1.12.1.26 | ColumnhwSctpAssocRemoteIP2Unfirm | read-only | current | The size of the unacknowledged data that is transmitted on the path. -1 returns by GET means associate with IP2 does not exist. Default: 2 |
| 1.3.6.1.4.1.2011.2.6.7.6.1.12.1.27 | ColumnhwSctpAssocRemoteIP2Rto | read-only | current | Retransmission Time-out(ms) -1 returns by GET means associate with IP2 does not exist. |
| 1.3.6.1.4.1.2011.2.6.7.6.1.12.1.28 | ColumnhwSctpAssocRemoteIP2Srtt | read-only | current | Smoothed Round-trip Time (ms) -1 returns by GET means associate with IP2 does not exist. |
| 1.3.6.1.4.1.2011.2.6.7.6.1.12.1.29 | ColumnhwSctpAssocRemoteIP2Rttvar | read-only | current | Round-trip Time Variation (ms) -1 returns by GET means associate with IP2 does not exist. |
| 1.3.6.1.4.1.2011.2.6.7.6.1.12.1.30 | ColumnhwSctpAssocRemoteIP2AllowHB | read-only | current | Whether HB can be sent from this address. Options: 1. no(1) -indicates that the HB can't be sent from this address 2. yes(2) -indicates that the HB can be sent… |
| 1.3.6.1.4.1.2011.2.6.7.6.1.13 | TablehwIsdnIuaDuaErrStatsThresholdCfgTable | not-accessible | current | Configuration table of L2UA IUA/DUA link error statistic threshold. The index of this table is hwIsdnIuaDuaErrLinkNoIndex. |
| 1.3.6.1.4.1.2011.2.6.7.6.1.13.1 | RowhwIsdnIuaDuaErrStatsThresholdCfgEntry | not-accessible | current | Configuration table of L2UA IUA/DUA link error statistic threshold. The index of this entry is hwIsdnIuaDuaErrLinkNoIndex. |
| 1.3.6.1.4.1.2011.2.6.7.6.1.13.1.1 | ColumnhwIsdnIuaDuaErrLinkNoIndex | not-accessible | current | Link index. |
| 1.3.6.1.4.1.2011.2.6.7.6.1.13.1.2 | ColumnhwIsdnIuaProtocolErrAlarmThreshold | read-write | current | Threshold of IUA error alarm. |
| 1.3.6.1.4.1.2011.2.6.7.6.1.13.1.3 | ColumnhwIsdnDuaProtocolErrAlarmThreshold | read-write | current | Threshold of DUA error alarm. |
| 1.3.6.1.4.1.2011.2.6.7.6.1.14 | TablehwMifSctpCfgParaTable | not-accessible | current | This table is used to config SCTP protocol parameters of a SCTP association. The indexes of this table are hwMifSctpCfgParaProtoType and hwMifSctpCfgParaInterf… |
| 1.3.6.1.4.1.2011.2.6.7.6.1.14.1 | RowhwMifSctpCfgParaEntry | not-accessible | current | This table is used to config SCTP protocol parameters of a SCTP association. The indexes of this entry are hwMifSctpCfgParaProtoType and hwMifSctpCfgParaInterf… |
| 1.3.6.1.4.1.2011.2.6.7.6.1.14.1.1 | ColumnhwMifSctpCfgParaProtoType | not-accessible | current | Protocol Type: IUA(0),H.248(1),SIP(2); |
| 1.3.6.1.4.1.2011.2.6.7.6.1.14.1.2 | ColumnhwMifSctpCfgParaInterfaceId | not-accessible | current | IUA-Link-ID/H248-Interface-ID/SIP-Interface-ID: if Protocol Type is IUA(0), this parameter for IUA LinkNo; if Protocol Type is H.248(1), this parameter for H24… |
| 1.3.6.1.4.1.2011.2.6.7.6.1.14.1.3 | ColumnhwMifSctpCfgParaMaxInStreamNum | read-write | current | Maximum number of inbound streams. |
| 1.3.6.1.4.1.2011.2.6.7.6.1.14.1.4 | ColumnhwMifSctpCfgParaMaxOutStreamNum | read-write | current | Maximum number of outbound streams |
| 1.3.6.1.4.1.2011.2.6.7.6.1.14.1.5 | ColumnhwMifSctpCfgParaRtoMin | read-only | current | The minimum RTO. Default: 1000 Unit: millisecond |
| 1.3.6.1.4.1.2011.2.6.7.6.1.14.1.6 | ColumnhwMifSctpCfgParaRtoMax | read-write | current | The maximum RTO. Default: 3000(Mg interface),60000(Iua-Link) Unit: millisecond |
| 1.3.6.1.4.1.2011.2.6.7.6.1.14.1.7 | ColumnhwMifSctpCfgParaRtoInit | read-write | current | The initial RTO. Unit: millisecond |
| 1.3.6.1.4.1.2011.2.6.7.6.1.14.1.8 | ColumnhwMifSctpCfgParaValidCookieLife | read-write | current | Cookie lifecycle. Unit: millisecond |
| 1.3.6.1.4.1.2011.2.6.7.6.1.14.1.9 | ColumnhwMifSctpCfgParaMaxInitRetrans | read-write | current | The maximum retransmit attempts of INIT |
| 1.3.6.1.4.1.2011.2.6.7.6.1.14.1.10 | ColumnhwMifSctpCfgParaRtoAlpha | read-write | current | Parameter of RTO Alpha |
| 1.3.6.1.4.1.2011.2.6.7.6.1.14.1.11 | ColumnhwMifSctpCfgParaRtoBeta | read-write | current | Parameter of RTO Beta |
| 1.3.6.1.4.1.2011.2.6.7.6.1.14.1.12 | ColumnhwMifSctpCfgParaAssocMaxRetrans | read-write | current | The maximum retransmit attempts in a association |
| 1.3.6.1.4.1.2011.2.6.7.6.1.14.1.13 | ColumnhwMifSctpCfgParaPathMaxRetrans | read-write | current | The maximum Retransmit attempts in a path |
| 1.3.6.1.4.1.2011.2.6.7.6.1.14.1.14 | ColumnhwMifSctpCfgParaNoCongestionLevel | read-write | current | Parameter of no-congestion level |
| 1.3.6.1.4.1.2011.2.6.7.6.1.14.1.15 | ColumnhwMifSctpCfgParaLowCongestionLevel | read-write | current | Parameter of low-congestion level |
| 1.3.6.1.4.1.2011.2.6.7.6.1.14.1.16 | ColumnhwMifSctpCfgParaHighCongestionLevel | read-write | current | Parameter of high-congestion level |
| 1.3.6.1.4.1.2011.2.6.7.6.1.14.1.17 | ColumnhwMifSctpCfgParaHbInterval | read-write | current | Heartbeat interval. For Mg interface, 10000~120000 is valid. For Iua-Link, 2000~120000 is valid. Default: 10000(Mg interface),30000(Iua-Link) Unit: millisecond |
| 1.3.6.1.4.1.2011.2.6.7.6.1.14.1.18 | ColumnhwMifSctpCfgParaSendChecksum | read-only | current | Sending the checksum. Options: 1. no(1) -indicates that the checksum is not Sending 2. yes(2) -indicates that the checksum is Sending |
| 1.3.6.1.4.1.2011.2.6.7.6.1.14.1.19 | ColumnhwMifSctpCfgParaRecvChecksum | read-only | current | Receiving the checksum. Options: 1. no(1) -indicates that the checksum is not Receiving 2. yes(2) -indicates that the checksum is Receiving |
| 1.3.6.1.4.1.2011.2.6.7.6.1.14.1.20 | ColumnhwMifSctpCfgParaChecksumArith | read-write | current | Checksum algorithm. Options: 1. adler32(1) -indicates that Checksum algorithm is ADLER32 2. crc32(2) -indicates that Checksum algorithm is CRC32 |
| 1.3.6.1.4.1.2011.2.6.7.6.1.15 | TablehwMifSctpRunningParaTable | not-accessible | current | This table is used to query current running SCTP protocol parameter. The indexes of this table are hwMifSctpRunningParaProtoType and hwMifSctpRunningParaInterf… |
| 1.3.6.1.4.1.2011.2.6.7.6.1.15.1 | RowhwMifSctpRunningParaEntry | not-accessible | current | This table is used to query current running SCTP protocol parameter. The indexes of this entry are hwMifSctpRunningParaProtoType and hwMifSctpRunningParaInterf… |
| 1.3.6.1.4.1.2011.2.6.7.6.1.15.1.1 | ColumnhwMifSctpRunningParaProtoType | not-accessible | current | Protocol Type: IUA(0),H.248(1),SIP(2); |
| 1.3.6.1.4.1.2011.2.6.7.6.1.15.1.2 | ColumnhwMifSctpRunningParaInterfaceId | not-accessible | current | IUA-Link-ID/H248-Interface-ID/SIP-Interface-ID: if Protocol Type is IUA(0), this parameter for IUA LinkNo; if Protocol Type is H.248(1), this parameter for H24… |
| 1.3.6.1.4.1.2011.2.6.7.6.1.15.1.3 | ColumnhwMifSctpRunningParaMaxInStreamNum | read-only | current | Maximum number of inbound streams. Default: 33 |
| 1.3.6.1.4.1.2011.2.6.7.6.1.15.1.4 | ColumnhwMifSctpRunningParaMaxOutStreamNum | read-only | current | Maximum number of outbound streams. Default: 33 |
| 1.3.6.1.4.1.2011.2.6.7.6.1.15.1.5 | ColumnhwMifSctpRunningParaRtoMin | read-only | current | The minimum RTO. Default: 1000 Unit: millisecond |
| 1.3.6.1.4.1.2011.2.6.7.6.1.15.1.6 | ColumnhwMifSctpRunningParaRtoMax | read-only | current | The maximum RTO. For Mg interface, default value 3000. For Iua-Link, default value 60000. Unit: millisecond |
| 1.3.6.1.4.1.2011.2.6.7.6.1.15.1.7 | ColumnhwMifSctpRunningParaRtoInit | read-only | current | The initial RTO. Default: 1000 Unit: millisecond |
| 1.3.6.1.4.1.2011.2.6.7.6.1.15.1.8 | ColumnhwMifSctpRunningParaValidCookieLife | read-only | current | Cookie lifecycle. Default: 60000 Unit: millisecond |
| 1.3.6.1.4.1.2011.2.6.7.6.1.15.1.9 | ColumnhwMifSctpRunningParaMaxInitRetrans | read-only | current | The maximum retransmit attempts of INIT. Default: 8 |
| 1.3.6.1.4.1.2011.2.6.7.6.1.15.1.10 | ColumnhwMifSctpRunningParaRtoAlpha | read-only | current | Parameter of RTO Alpha. Default: 12 |
| 1.3.6.1.4.1.2011.2.6.7.6.1.15.1.11 | ColumnhwMifSctpRunningParaRtoBeta | read-only | current | Parameter of RTO Beta. Default: 25 |
| 1.3.6.1.4.1.2011.2.6.7.6.1.15.1.12 | ColumnhwMifSctpRunningParaAssocMaxRetrans | read-only | current | The maximum retransmit attempts in a association. Default: 10 |
| 1.3.6.1.4.1.2011.2.6.7.6.1.15.1.13 | ColumnhwMifSctpRunningParaPathMaxRetrans | read-only | current | The maximum Retransmit attempts in a path. Default: 5 |
| 1.3.6.1.4.1.2011.2.6.7.6.1.15.1.14 | ColumnhwMifSctpRunningParaNoCongestionLevel | read-only | current | Parameter of no-congestion level Default: 40 |
| 1.3.6.1.4.1.2011.2.6.7.6.1.15.1.15 | ColumnhwMifSctpRunningParaLowCongestionLevel | read-only | current | Parameter of low-congestion level Default: 60 |
| 1.3.6.1.4.1.2011.2.6.7.6.1.15.1.16 | ColumnhwMifSctpRunningParaHighCongestionLevel | read-only | current | Parameter of high-congestion level. Default: 80 |
| 1.3.6.1.4.1.2011.2.6.7.6.1.15.1.17 | ColumnhwMifSctpRunningParaHbInterval | read-only | current | Heartbeat interval. For Mg interface, default value 10000. Default: 30000 Unit: millisecond |
| 1.3.6.1.4.1.2011.2.6.7.6.1.15.1.18 | ColumnhwMifSctpRunningParaSendChecksum | read-only | current | Sending the checksum. Options: 1. no(1) -indicates that the checksum is not Sending 2. yes(2) -indicates that the checksum is Sending Default: 2 |
| 1.3.6.1.4.1.2011.2.6.7.6.1.15.1.19 | ColumnhwMifSctpRunningParaRecvChecksum | read-only | current | Receiving the checksum. Options: 1. no(1) -indicates that the checksum is not Receiving 2. yes(2) -indicates that the checksum is Receiving Default: 2 |
| 1.3.6.1.4.1.2011.2.6.7.6.1.15.1.20 | ColumnhwMifSctpRunningParaChecksumArith | read-only | current | Checksum algorithm. Options: 1. adler32(1) -indicates that Checksum algorithm is ADLER32 2. crc32(2) -indicates that Checksum algorithm is CRC32 Default: 2 |
| 1.3.6.1.4.1.2011.2.6.7.6.1.16 | NodehwSctpGlobalParaTable | |||
| 1.3.6.1.4.1.2011.2.6.7.6.1.16.1 | ScalarhwSctpGlobalParaSendChecksum | read-write | current | Sending the checksum: Options: 1. no(1) -indicates that the checksum is not Sending 2. yes(2) -indicates that the checksum is Sending Default: 2 |
| 1.3.6.1.4.1.2011.2.6.7.6.1.16.2 | ScalarhwSctpGlobalParaRecvChecksum | read-write | current | Receiving the checksum. Options: 1. no(1) -indicates that the checksum is not Receiving 2. yes(2) -indicates that the checksum is Receiving Default: 2 |
| 1.3.6.1.4.1.2011.2.6.7.6.2 | NodehwIASSigtranTrapsVbOids | |||
| 1.3.6.1.4.1.2011.2.6.7.6.3 | NodehwIASSigtranTraps | |||
| 1.3.6.1.4.1.2011.2.6.7.6.3.1 | NodehwIASSigtranCommonTraps | |||
| 1.3.6.1.4.1.2011.2.6.7.6.3.1.1 | NodehwIASSigtranL2uaTraps | |||
| 1.3.6.1.4.1.2011.2.6.7.6.3.2 | NodehwIASSigtranAlarmTraps | |||
| 1.3.6.1.4.1.2011.2.6.7.6.3.2.1 | NodehwIASSigtranL2uaAlarmTraps | |||
| 1.3.6.1.4.1.2011.2.6.7.6.3.2.1.0 | NodehwIASSigtranL2uaAlarmTrapsPrefix | |||
| 1.3.6.1.4.1.2011.2.6.7.6.3.2.1.0.1 | NotificationhwIASSigtranL2uaLinkUnestTrap | current | This notification indicates that the L2UA link is not established. | |
| 1.3.6.1.4.1.2011.2.6.7.6.3.2.1.0.2 | NotificationhwIASSigtranL2uaLinkActiveTrap | current | This notification indicates that the L2UA link is actived. | |
| 1.3.6.1.4.1.2011.2.6.7.6.3.2.1.0.3 | NotificationhwIASSigtranL2uaLinksetDownTrap | current | This notification indicates that the L2UA linkset is not activated. | |
| 1.3.6.1.4.1.2011.2.6.7.6.3.2.1.0.4 | NotificationhwIASSigtranL2uaLinksetActiveTrap | current | This notification indicates that the L2UA linkset is activated. |