IANA-PRINTER-MIB
15 objects
This MIB module defines a set of printing-related TEXTUAL-CONVENTIONs for use in Printer MIB (RFC 3805), Finisher MIB (RFC 3806), and other MIBs which need to specify printing mechanism details. Any additions or changes to the contents of this MIB module require either publication of an RFC, or Designated Expert Review as defined in RFC 2434, Guidelines for Writing an IANA Considerations Section in RFCs. The Designated Expert will be selected by the IESG Area Director(s) of the Applications Area. Copyright (C) The Internet Society (2004). The initial version of this MIB module was published in RFC 3805. For full legal notices see the RFC itself or see: http://www.ietf.org/copyrights/ianamib.html
Imported Objects
| SNMPv2-SMI | mib-2 MODULE-IDENTITY |
| SNMPv2-TC | TEXTUAL-CONVENTION |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.2.1.109 | IdentityianaPrinterMIB | This MIB module defines a set of printing-related TEXTUAL-CONVENTIONs for use in Printer MIB (RFC 3805), Finisher MIB (RFC 3806), and other MIBs which need to … |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| PrtAlertCodeTC | INTEGER { other(1), unknown(2), coverOpen(3), coverClosed(4), interlockOpen(5), interlockClosed(6), configurationChange(7), jam(8), subunitMissing(9), subunitLifeAlmostOver(10), subunitLifeOver(11), subunitAlmostEmpty(12), subunitEmpty(13), subunitAlmostFull(14), subunitFull(15), subunitNearLimit(16), subunitAtLimit(17), subunitOpened(18), subunitClosed(19), subunitTurnedOn(20), subunitTurnedOff(21), subunitOffline(22), subunitPowerSaver(23), subunitWarmingUp(24), subunitAdded(25), subunitRemoved(26), subunitResourceAdded(27), subunitResourceRemoved(28), subunitRecoverableFailure(29), subunitUnrecoverableFailure(30), subunitRecoverableStorageError(31), subunitUnrecoverableStorageError(32), subunitMotorFailure(33), subunitMemoryExhausted(34), subunitUnderTemperature(35), subunitOverTemperature(36), subunitTimingFailure(37), subunitThermistorFailure(38), doorOpen(501), doorClosed(502), powerUp(503), powerDown(504), printerNMSReset(505), printerManualReset(506), printerReadyToPrint(507), inputMediaTrayMissing(801), inputMediaSizeChange(802), inputMediaWeightChange(803), inputMediaTypeChange(804), inputMediaColorChange(805), inputMediaFormPartsChange(806), inputMediaSupplyLow(807), inputMediaSupplyEmpty(808), inputMediaChangeRequest(809), inputManualInputRequest(810), inputTrayPositionFailure(811), inputTrayElevationFailure(812), inputCannotFeedSizeSelected(813), outputMediaTrayMissing(901), outputMediaTrayAlmostFull(902), outputMediaTrayFull(903), outputMailboxSelectFailure(904), markerFuserUnderTemperature(1001), markerFuserOverTemperature(1002), markerFuserTimingFailure(1003), markerFuserThermistorFailure(1004), markerAdjustingPrintQuality(1005), markerTonerEmpty(1101), markerInkEmpty(1102), markerPrintRibbonEmpty(1103), markerTonerAlmostEmpty(1104), markerInkAlmostEmpty(1105), markerPrintRibbonAlmostEmpty(1106), markerWasteTonerReceptacleAlmostFull(1107), markerWasteInkReceptacleAlmostFull(1108), markerWasteTonerReceptacleFull(1109), markerWasteInkReceptacleFull(1110), markerOpcLifeAlmostOver(1111), markerOpcLifeOver(1112), markerDeveloperAlmostEmpty(1113), markerDeveloperEmpty(1114), markerTonerCartridgeMissing(1115), mediaPathMediaTrayMissing(1301), mediaPathMediaTrayAlmostFull(1302), mediaPathMediaTrayFull(1303), mediaPathCannotDuplexMediaSelected(1304), interpreterMemoryIncrease(1501), interpreterMemoryDecrease(1502), interpreterCartridgeAdded(1503), interpreterCartridgeDeleted(1504), interpreterResourceAdded(1505), interpreterResourceDeleted(1506), interpreterResourceUnavailable(1507), interpreterComplexPageEncountered(1509), alertRemovalOfBinaryChangeEntry(1801) } | current | The code that describes the type of alert for this entry in the table. Binary change event alerts describe states of the subunit while unary change event alerts describe a single event. The same alert code can be used f… |
| PrtAlertGroupTC | INTEGER { other(1), hostResourcesMIBStorageTable(3), hostResourcesMIBDeviceTable(4), generalPrinter(5), cover(6), localization(7), input(8), output(9), marker(10), markerSupplies(11), markerColorant(12), mediaPath(13), channel(14), interpreter(15), consoleDisplayBuffer(16), consoleLights(17), alert(18), finDevice(30), finSupply(31), finSupplyMediaInput(32), finAttribute(33) } | current | The type of subunit within the printer model that this alert is related. Input, output, and markers are examples of printer model groups, i.e., examples of types of subunits. Wherever possible, the enumerations match th… |
| PrtAlertTrainingLevelTC | INTEGER { other(1), unknown(2), untrained(3), trained(4), fieldService(5), management(6), noInterventionRequired(7) } | current | The level of training required to handle this alert, if human intervention is required. The noInterventionRequired value should be used if the event does not require any human intervention. The training level is an enum… |
| PrtChannelTypeTC | INTEGER { other(1), chSerialPort(3), chParallelPort(4), chIEEE1284Port(5), chSCSIPort(6), chAppleTalkPAP(7), chLPDServer(8), chNetwareRPrinter(9), chNetwarePServer(10), chPort9100(11), chAppSocket(12), chFTP(13), chTFTP(14), chDLCLLCPort(15), chIBM3270(16), chIBM5250(17), chFax(18), chIEEE1394(19), chTransport1(20), chCPAP(21), chDCERemoteProcCall(22), chONCRemoteProcCall(23), chOLE(24), chNamedPipe(25), chPCPrint(26), chServerMessageBlock(27), chDPMF(28), chDLLAPI(29), chVxDAPI(30), chSystemObjectManager(31), chDECLAT(32), chNPAP(33), chUSB(34), chIRDA(35), chPrintXChange(36), chPortTCP(37), chBidirPortTCP(38), chUNPP(39), chAppleTalkADSP(40), chPortSPX(41), chPortHTTP(42), chNDPS(43), chIPP(44), chSMTP(45) } | current | This enumeration indicates the type of channel that is receiving jobs. |
| PrtConsoleColorTC | INTEGER { other(1), unknown(2), white(3), red(4), green(5), blue(6), cyan(7), magenta(8), yellow(9), orange(10) } | current | The color of this light. |
| PrtConsoleDisableTC | INTEGER { enabled(3), disabled(4) } | current | This value indicates whether or not input is accepted from the operator console. A value of 'enabled' indicates that input is accepted from the console, and a value of 'disabled' indicates that input is not accepted fro… |
| PrtCoverStatusTC | INTEGER { other(1), coverOpen(3), coverClosed(4), interlockOpen(5), interlockClosed(6) } | current | Values for encoding the state of a particular cover or access panel on the printer case or enclosure. |
| PrtGeneralResetTC | INTEGER { notResetting(3), powerCycleReset(4), resetToNVRAM(5), resetToFactoryDefaults(6) } | current | Values for reading and writing the prtGeneralReset object. If a device does not have NVRAM, the device shall none the less respond to a SET with the value resetToNVRAM(5) with a sort of warm reset that resets the device… |
| PrtInputTypeTC | INTEGER { other(1), unknown(2), sheetFeedAutoRemovableTray(3), sheetFeedAutoNonRemovableTray(4), sheetFeedManual(5), continuousRoll(6), continuousFanFold(7) } | current | The type of technology (discriminated primarily according to feeder mechanism type) employed by a specific component or components. |
| PrtInterpreterLangFamilyTC | INTEGER { other(1), unknown(2), langPCL(3), langHPGL(4), langPJL(5), langPS(6), langIPDS(7), langPPDS(8), langEscapeP(9), langEpson(10), langDDIF(11), langInterpress(12), langISO6429(13), langLineData(14), langMODCA(15), langREGIS(16), langSCS(17), langSPDL(18), langTEK4014(19), langPDS(20), langIGP(21), langCodeV(22), langDSCDSE(23), langWPS(24), langLN03(25), langCCITT(26), langQUIC(27), langCPAP(28), langDecPPL(29), langSimpleText(30), langNPAP(31), langDOC(32), langimPress(33), langPinwriter(34), langNPDL(35), langNEC201PL(36), langAutomatic(37), langPages(38), langLIPS(39), langTIFF(40), langDiagnostic(41), langPSPrinter(42), langCaPSL(43), langEXCL(44), langLCDS(45), langXES(46), langPCLXL(47), langART(48), langTIPSI(49), langPrescribe(50), langLinePrinter(51), langIDP(52), langXJCL(53), langPDF(54), langRPDL(55), langIntermecIPL(56), langUBIFingerprint(57), langUBIDirectProtocol(58), langFujitsu(59), langCGM(60), langJPEG(61), langCALS1(62), langCALS2(63), langNIRS(64), langC4(65) } | current | This enumeration indicates the type of interpreter that is receiving jobs. |
| PrtMarkerMarkTechTC | INTEGER { other(1), unknown(2), electrophotographicLED(3), electrophotographicLaser(4), electrophotographicOther(5), impactMovingHeadDotMatrix9pin(6), impactMovingHeadDotMatrix24pin(7), impactMovingHeadDotMatrixOther(8), impactMovingHeadFullyFormed(9), impactBand(10), impactOther(11), inkjetAqueous(12), inkjetSolid(13), inkjetOther(14), pen(15), thermalTransfer(16), thermalSensitive(17), thermalDiffusion(18), thermalOther(19), electroerosion(20), electrostatic(21), photographicMicrofiche(22), photographicImagesetter(23), photographicOther(24), ionDeposition(25), eBeam(26), typesetter(27) } | current | The type of marking technology used for this marking subunit. |
| PrtMarkerSuppliesTypeTC | INTEGER { other(1), unknown(2), toner(3), wasteToner(4), ink(5), inkCartridge(6), inkRibbon(7), wasteInk(8), opc(9), developer(10), fuserOil(11), solidWax(12), ribbonWax(13), wasteWax(14), fuser(15), coronaWire(16), fuserOilWick(17), cleanerUnit(18), fuserCleaningPad(19), transferUnit(20), tonerCartridge(21), fuserOiler(22), water(23), wasteWater(24), glueWaterAdditive(25), wastePaper(26), bindingSupply(27), bandingSupply(28), stitchingWire(29), shrinkWrap(30), paperWrap(31), staples(32), inserts(33), covers(34) } | current | The type of this supply. |
| PrtMediaPathTypeTC | INTEGER { other(1), unknown(2), longEdgeBindingDuplex(3), shortEdgeBindingDuplex(4), simplex(5) } | current | The type of the media path for this media path. |
| PrtOutputTypeTC | INTEGER { other(1), unknown(2), removableBin(3), unRemovableBin(4), continuousRollDevice(5), mailBox(6), continuousFanFold(7) } | current | The Type of technology supported by this output subunit. |