IBM-6611-APPN-MIB
417 objects
No module-level DESCRIPTION found.
Imported Objects
| RFC-1212 | OBJECT-TYPE |
| RFC1155-SMI | Counter enterprises Gauge IpAddress TimeTicks |
| RFC1213-MIB | DisplayString |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2 | Nodeibm | |||
| 1.3.6.1.4.1.2.6 | NodeibmProd | |||
| 1.3.6.1.4.1.2.6.2 | Nodeibm6611 | |||
| 1.3.6.1.4.1.2.6.2.13 | Nodeibmappn | |||
| 1.3.6.1.4.1.2.6.2.13.1 | NodeibmappnNode | |||
| 1.3.6.1.4.1.2.6.2.13.1.1 | NodeibmappnGeneralInfoAndCaps | |||
| 1.3.6.1.4.1.2.6.2.13.1.1.1 | ScalaribmappnNodeCpName | read-only | mandatory | Administratively-assigned network name for this node in the format NETID.CPNAME. |
| 1.3.6.1.4.1.2.6.2.13.1.1.2 | ScalaribmappnNodeNetid | read-only | mandatory | Administratively-assigned APPN network identification, which can be from one to eight characters. This ID is used with the control point name to create a fully… |
| 1.3.6.1.4.1.2.6.2.13.1.1.3 | ScalaribmappnNodeBlockNum | read-only | mandatory | The block number is the first three digits of the node_id. These 3 hexadecimal digits identify the product and are not configurable. |
| 1.3.6.1.4.1.2.6.2.13.1.1.4 | ScalaribmappnNodeIdNum | read-only | mandatory | The ID number is the last 5 digits of the node_id. These 5 hexadecimal digits are administratively defined and combined with the 3 digit block number form the … |
| 1.3.6.1.4.1.2.6.2.13.1.1.5 | ScalaribmappnNodeType | read-only | mandatory | Type of APPN node, either network, len, or end node. |
| 1.3.6.1.4.1.2.6.2.13.1.1.6 | ScalaribmappnNodeUpTime | read-only | mandatory | Time (in hundredths of a second) since this APPN node was initialized. |
| 1.3.6.1.4.1.2.6.2.13.1.1.7 | ScalaribmappnNodeNegotLs | read-only | mandatory | Indicates whether this node supports negotiable link stations. |
| 1.3.6.1.4.1.2.6.2.13.1.1.8 | ScalaribmappnNodeSegReasm | read-only | mandatory | Indicates whether this node supports segment reassembly. This is only supported when segment generation is also supported. |
| 1.3.6.1.4.1.2.6.2.13.1.1.9 | ScalaribmappnNodeBindReasm | read-only | mandatory | Indicates whether this node supports Bind segment reassembly. This will only be supported when Bind segment generation is also supported. |
| 1.3.6.1.4.1.2.6.2.13.1.1.10 | ScalaribmappnNodeParallelTg | read-only | mandatory | Indicates whether this node supports parallel TGs. |
| 1.3.6.1.4.1.2.6.2.13.1.1.11 | ScalaribmappnNodeService | read-only | mandatory | Indicates whether this node allows call-in from nodes not defined locally. |
| 1.3.6.1.4.1.2.6.2.13.1.1.12 | ScalaribmappnNodeAdaptiveBindPacing | read-only | mandatory | Indicates whether this node supports adaptive bind pacing. |
| 1.3.6.1.4.1.2.6.2.13.1.2 | NodeibmappnNnUniqueInfoAndCaps | |||
| 1.3.6.1.4.1.2.6.2.13.1.2.1 | ScalaribmappnNodeNnRcvRegChar | read-only | mandatory | Indicates whether this node supports receiving registered characteristics. |
| 1.3.6.1.4.1.2.6.2.13.1.2.2 | ScalaribmappnNodeNnGateway | read-only | mandatory | Indicates whether this is a gateway node. |
| 1.3.6.1.4.1.2.6.2.13.1.2.3 | ScalaribmappnNodeNnCentralDirectory | read-only | mandatory | Indicates whether this node supports central directory cache. |
| 1.3.6.1.4.1.2.6.2.13.1.2.4 | ScalaribmappnNodeNnTreeCache | read-only | mandatory | Indicates whether this node supports route tree cache. |
| 1.3.6.1.4.1.2.6.2.13.1.2.5 | ScalaribmappnNodeNnTreeUpdate | read-only | mandatory | Indicates whether this node supports incremental_tree_update, which is only supported when tree caching is supported. |
| 1.3.6.1.4.1.2.6.2.13.1.2.6 | ScalaribmappnNodeNnRouteAddResist | read-only | mandatory | Route addition resistance is a value that indicates the relative desirability of using this node for intermediate session traffic. The value, which can be any … |
| 1.3.6.1.4.1.2.6.2.13.1.2.7 | ScalaribmappnNodeNnIsr | read-only | mandatory | Indicates whether the node supports intermediate session routing. |
| 1.3.6.1.4.1.2.6.2.13.1.2.8 | ScalaribmappnNodeNnFrsn | read-only | mandatory | Flow reduction sequence numbers (FRSNs) are associated with Topology Database Updates (TDUs) and are unique only within each APPN network node. A TDU can be as… |
| 1.3.6.1.4.1.2.6.2.13.1.3 | NodeibmappnEnUniqueCaps | |||
| 1.3.6.1.4.1.2.6.2.13.1.3.1 | ScalaribmappnNodeEnSegGen | read-only | mandatory | Indicates whether this end node supports segment generation. |
| 1.3.6.1.4.1.2.6.2.13.1.3.2 | ScalaribmappnNodeEnModeCosMap | read-only | mandatory | Indicates whether this end node supports mode name to COS name mapping. |
| 1.3.6.1.4.1.2.6.2.13.1.3.3 | ScalaribmappnNodeEnLocateCdinit | read-only | mandatory | Indicates whether this end node supports Locate Cdinit. |
| 1.3.6.1.4.1.2.6.2.13.1.3.4 | ScalaribmappnNodeEnSendRegNames | read-only | mandatory | Indicates whether the node will register its LUs with the adjacent serving network node: NO - do not register names YES - register names |
| 1.3.6.1.4.1.2.6.2.13.1.3.5 | ScalaribmappnNodeEnSendRegChar | read-only | mandatory | Indicates whether this node supports send register characteristics, which is only supported when send registered names is also supported. |
| 1.3.6.1.4.1.2.6.2.13.1.4 | NodeibmappnPortInformation | |||
| 1.3.6.1.4.1.2.6.2.13.1.4.1 | TableibmappnNodePortTable | not-accessible | mandatory | The Port table describes the configuration and current status of the ports used by APPN. The type of DLC is included in this table as a pointer to the DLC port… |
| 1.3.6.1.4.1.2.6.2.13.1.4.1.1 | RowibmappnNodePortEntry | not-accessible | mandatory | The Port Name is used as the index to this table. |
| 1.3.6.1.4.1.2.6.2.13.1.4.1.1.1 | ColumnibmappnNodePortName | read-only | mandatory | Administratively-assigned name for this APPN port. The name can be from one to eight characters. |
| 1.3.6.1.4.1.2.6.2.13.1.4.1.1.2 | ColumnibmappnNodePortState | read-write | mandatory | Indicates the current state of this port. |
| 1.3.6.1.4.1.2.6.2.13.1.4.1.1.3 | ColumnibmappnNodePortDlcType | read-only | mandatory | The type of DLC interface, distinguished according to the protocol immediately 'below' this layer. |
| 1.3.6.1.4.1.2.6.2.13.1.4.1.1.4 | ColumnibmappnNodePortPortType | read-only | mandatory | Identifies the type of line used by this port. |
| 1.3.6.1.4.1.2.6.2.13.1.4.1.1.5 | ColumnibmappnNodePortSIMRIM | read-only | mandatory | Indicates whether Set Initialization Mode (SIM) and Receive Initialization Mode (RIM) are supported. |
| 1.3.6.1.4.1.2.6.2.13.1.4.1.1.6 | ColumnibmappnNodePortLsRole | read-only | mandatory | Initial role for LSs activated through this port, where 'abm' indicates asynchronous balance mode. |
| 1.3.6.1.4.1.2.6.2.13.1.4.1.1.7 | ColumnibmappnNodePortMaxRcvBtuSize | read-only | mandatory | Maximum Basic Transmission Size (BTU) that a link station on this port can receive. |
| 1.3.6.1.4.1.2.6.2.13.1.4.1.1.8 | ColumnibmappnNodePortMaxIframeWindow | read-only | mandatory | Maximum number of I-frames that can be received by the XID sender before an acknowledgement is received. |
| 1.3.6.1.4.1.2.6.2.13.1.4.1.1.9 | ColumnibmappnNodePortDefLsGoodXids | read-only | mandatory | The total number of successfull XIDs that have occurred on all defined link stations on this port since the last time this port was started. |
| 1.3.6.1.4.1.2.6.2.13.1.4.1.1.10 | ColumnibmappnNodePortDefLsBadXids | read-only | mandatory | The total number of unsuccessfull XIDs that have occurred on all defined link stations on this port since the last time this port was started. |
| 1.3.6.1.4.1.2.6.2.13.1.4.1.1.11 | ColumnibmappnNodePortDynLsGoodXids | read-only | mandatory | The total number of successfull XIDs that have occurred on all dynamic link stations on this port since the last time this port was started. |
| 1.3.6.1.4.1.2.6.2.13.1.4.1.1.12 | ColumnibmappnNodePortDynLsBadXids | read-only | mandatory | The total number of unsuccessfull XIDs that have occurred on all dynamic link stations on this port since the last time this port was started. |
| 1.3.6.1.4.1.2.6.2.13.1.4.1.1.13 | ColumnibmappnNodePortSpecific | read-only | mandatory | Identifies the port specific OBJECT IDENTIFIER that can provide additional information. |
| 1.3.6.1.4.1.2.6.2.13.1.4.2 | TableibmappnNodePortIpTable | not-accessible | mandatory | Port table (TCP/IP specific). |
| 1.3.6.1.4.1.2.6.2.13.1.4.2.1 | RowibmappnNodePortIpEntry | not-accessible | mandatory | The IP Name is used as the index to this table. |
| 1.3.6.1.4.1.2.6.2.13.1.4.2.1.1 | ColumnibmappnNodePortIpName | read-only | mandatory | Administratively-assigned name for this APPN port. The name can be from one to eight characters. |
| 1.3.6.1.4.1.2.6.2.13.1.4.2.1.2 | ColumnibmappnNodePortIpPortNum | read-only | mandatory | Local TCP/IP port number. |
| 1.3.6.1.4.1.2.6.2.13.1.4.3 | TableibmappnNodePortDlsTable | not-accessible | mandatory | Port table (DLS specific). |
| 1.3.6.1.4.1.2.6.2.13.1.4.3.1 | RowibmappnNodePortDlsEntry | not-accessible | mandatory | The DLS Name is used as the index to this table. |
| 1.3.6.1.4.1.2.6.2.13.1.4.3.1.1 | ColumnibmappnNodePortDlsName | read-only | mandatory | Administratively-assigned name for this APPN DLS port. The name can be from one to eight characters. |
| 1.3.6.1.4.1.2.6.2.13.1.4.3.1.2 | ColumnibmappnNodePortDlsMac | read-only | mandatory | Local DLS MAC address. |
| 1.3.6.1.4.1.2.6.2.13.1.4.3.1.3 | ColumnibmappnNodePortDlsSap | read-only | mandatory | Local DLS Sap address. |
| 1.3.6.1.4.1.2.6.2.13.1.4.4 | TableibmappnNodePortTrTable | not-accessible | mandatory | Port table (Token Ring specific). |
| 1.3.6.1.4.1.2.6.2.13.1.4.4.1 | RowibmappnNodePortTrEntry | not-accessible | mandatory | The TR Name is used as the index to this table. |
| 1.3.6.1.4.1.2.6.2.13.1.4.4.1.1 | ColumnibmappnNodePortTrName | read-only | mandatory | Administratively-assigned name for this APPN port. The name can be from one to eight characters. |
| 1.3.6.1.4.1.2.6.2.13.1.4.4.1.2 | ColumnibmappnNodePortTrMac | read-only | mandatory | Local Token Ring MAC address. |
| 1.3.6.1.4.1.2.6.2.13.1.4.4.1.3 | ColumnibmappnNodePortTrSap | read-only | mandatory | Local Token Ring Sap address. |
| 1.3.6.1.4.1.2.6.2.13.1.4.5 | TableibmappnNodePortDlcTraceTable | not-accessible | mandatory | Port table generic DLC trace table. |
| 1.3.6.1.4.1.2.6.2.13.1.4.5.1 | RowibmappnNodePortDlcTraceEntry | not-accessible | mandatory | The Port name and a dynamic integer are the index to this table. |
| 1.3.6.1.4.1.2.6.2.13.1.4.5.1.1 | ColumnibmappnNodePortDlcTracPortName | read-only | mandatory | The Port name associated with this this trace table entry. |
| 1.3.6.1.4.1.2.6.2.13.1.4.5.1.2 | ColumnibmappnNodePortDlcTracIndex | read-only | mandatory | This index value is updated every time a new trace entry is created which provides a means to retrieve only the updated entries and also provides a simple meth… |
| 1.3.6.1.4.1.2.6.2.13.1.4.5.1.3 | ColumnibmappnNodePortDlcTracDlcType | read-only | mandatory | The type of DLC interface, distinguished according to the protocol immediately 'below' this layer. |
| 1.3.6.1.4.1.2.6.2.13.1.4.5.1.4 | ColumnibmappnNodePortDlcTracLocalAddr | read-only | mandatory | Local address in format described below: other = free form DisplayString ip = ld. ld. ld. ld / 2d tr = lx: lx: lx: lx: lx: lx . lx dlsw = lx: lx: lx: lx: lx: l… |
| 1.3.6.1.4.1.2.6.2.13.1.4.5.1.5 | ColumnibmappnNodePortDlcTracRemoteAddr | read-only | mandatory | Remote Address in the format described below: other = free form DisplayString ip = ld. ld. ld. ld / 2d tr = lx: lx: lx: lx: lx: lx . lx dlsw = lx: lx: lx: lx: … |
| 1.3.6.1.4.1.2.6.2.13.1.4.5.1.6 | ColumnibmappnNodePortDlcTracMsgType | read-only | mandatory | Indicates the type of trace record entry |
| 1.3.6.1.4.1.2.6.2.13.1.4.5.1.7 | ColumnibmappnNodePortDlcTracCmdType | read-only | mandatory | Indicates the command type of the trace entry. |
| 1.3.6.1.4.1.2.6.2.13.1.4.5.1.8 | ColumnibmappnNodePortDlcTracUseWan | read-only | mandatory | Indicates the type of connection of the trace entry. For example, token ring and ethernet ports will have useLan as connection. For the dls port, it could be e… |
| 1.3.6.1.4.1.2.6.2.13.1.5 | NodeibmappnLinkStationInformation | |||
| 1.3.6.1.4.1.2.6.2.13.1.5.1 | TableibmappnNodeLsTable | not-accessible | mandatory | This table contains detail information about the link station configuration and current status. |
| 1.3.6.1.4.1.2.6.2.13.1.5.1.1 | RowibmappnNodeLsEntry | not-accessible | mandatory | This table is indexed by the link station name. |
| 1.3.6.1.4.1.2.6.2.13.1.5.1.1.1 | ColumnibmappnNodeLsName | read-only | mandatory | Administratively-assigned name for the link station. The name can be from one to eight characters. |
| 1.3.6.1.4.1.2.6.2.13.1.5.1.1.2 | ColumnibmappnNodeLsPortName | read-only | mandatory | Administratively-assigned name for the port. The name can be from one to eight characters. |
| 1.3.6.1.4.1.2.6.2.13.1.5.1.1.3 | ColumnibmappnNodeLsDlcType | read-only | mandatory | The type of DLC interface, distinguished according to the protocol immediately 'below' this layer. |
| 1.3.6.1.4.1.2.6.2.13.1.5.1.1.4 | ColumnibmappnNodeLsDynamic | read-only | mandatory | Identifies whether this resource is a dynamic link station. Dynamic link stations are created when adjacent nodes that have not been locally defined establish … |
| 1.3.6.1.4.1.2.6.2.13.1.5.1.1.5 | ColumnibmappnNodeLsState | read-write | mandatory | State of this link station. |
| 1.3.6.1.4.1.2.6.2.13.1.5.1.1.6 | ColumnibmappnNodeLsCpName | read-only | mandatory | Fully-qualified name of the adjacent node for this link station. The name can be from three to seventeen characters. Format is netid.cpname. |
| 1.3.6.1.4.1.2.6.2.13.1.5.1.1.7 | ColumnibmappnNodeLsTgNum | read-only | mandatory | Number associated with the TG to this link station. |
| 1.3.6.1.4.1.2.6.2.13.1.5.1.1.8 | ColumnibmappnNodeLsLimResource | read-only | mandatory | Indicates whether the link station is a limited resource. If it is, the TG is deactivated when there are no sessions. |
| 1.3.6.1.4.1.2.6.2.13.1.5.1.1.9 | ColumnibmappnNodeLsMigration | read-only | mandatory | Indicates whether this link station will be used for connections to down-level or migration partners. |
| 1.3.6.1.4.1.2.6.2.13.1.5.1.1.10 | ColumnibmappnNodeLsBlockNum | read-only | mandatory | The block number is the first three digits of the node_id. These 3 hexideimal digits identify the product and are not configurable. |
| 1.3.6.1.4.1.2.6.2.13.1.5.1.1.11 | ColumnibmappnNodeLsIdNum | read-only | mandatory | The ID number is the last 5 digits of the node_id. These 5 hexadecimal digits are administratively defined and combined with the 3 digit block number form the … |
| 1.3.6.1.4.1.2.6.2.13.1.5.1.1.12 | ColumnibmappnNodeLsCpCpSession | read-only | mandatory | Indicates whether CP-CP sessions are supported by this link station. |
| 1.3.6.1.4.1.2.6.2.13.1.5.1.1.13 | ColumnibmappnNodeLsTargetPacingCount | read-only | mandatory | Numeric value between 0 and 32767 inclusive indicating the desired pacing window size for BINDs on this TG. The number is significant only when fixed bind paci… |
| 1.3.6.1.4.1.2.6.2.13.1.5.1.1.14 | ColumnibmappnNodeLsMaxSendBtuSize | read-only | mandatory | Numeric value between 0 and 32767 inclusive indicating the desired number of bytes in a Basic Transmission Unit (BTU) that can be sent on this TG. This is an a… |
| 1.3.6.1.4.1.2.6.2.13.1.5.1.1.15 | ColumnibmappnNodeLsEffCap | read-only | mandatory | The effective capacity is an integer value that indicates the kilo bits per second. It is derived from the link bandwidth and maximum load factor with the rang… |
| 1.3.6.1.4.1.2.6.2.13.1.5.1.1.16 | ColumnibmappnNodeLsConnCost | read-only | mandatory | Cost per connect time: a value representing the relative cost per unit of time to use the TG. Range is from 0, which means no cost, to 255, which indicates max… |
| 1.3.6.1.4.1.2.6.2.13.1.5.1.1.17 | ColumnibmappnNodeLsByteCost | read-only | mandatory | Relative cost of transmitting a byte over this link. Range is from 0 (lowest cost) to 255. This is an administratively assigned value associated with the TG us… |
| 1.3.6.1.4.1.2.6.2.13.1.5.1.1.18 | ColumnibmappnNodeLsSecurity | read-only | mandatory | The security is represented as an integer with a range of 1 thru 255 with the most common values enumerated as defined above. This is an administratively assig… |
| 1.3.6.1.4.1.2.6.2.13.1.5.1.1.19 | ColumnibmappnNodeLsDelay | read-only | mandatory | Relative amount of time that it takes for a signal to travel the length of the logical link. This time is represented in micro seconds, with some of the more c… |
| 1.3.6.1.4.1.2.6.2.13.1.5.1.1.20 | ColumnibmappnNodeLsUsr1 | read-only | mandatory | First user-defined TG characteristic for this TG with a range of 0-255. This is an administratively assigned value associated with the TG using this link stati… |
| 1.3.6.1.4.1.2.6.2.13.1.5.1.1.21 | ColumnibmappnNodeLsUsr2 | read-only | mandatory | Second user-defined TG characteristic for this TG with a range of 0-255. This is an administratively assigned value associated with the TG using this link stat… |
| 1.3.6.1.4.1.2.6.2.13.1.5.1.1.22 | ColumnibmappnNodeLsUsr3 | read-only | mandatory | Third user-defined TG characteristic for this TG with a range of 0-255. This is an administratively assigned value associated with the TG using this link stati… |
| 1.3.6.1.4.1.2.6.2.13.1.5.1.1.23 | ColumnibmappnNodeLsInXidBytes | read-only | mandatory | Number of XID bytes received. |
| 1.3.6.1.4.1.2.6.2.13.1.5.1.1.24 | ColumnibmappnNodeLsInMsgBytes | read-only | mandatory | Number of message (I-frame) bytes received. |
| 1.3.6.1.4.1.2.6.2.13.1.5.1.1.25 | ColumnibmappnNodeLsInXidFrames | read-only | mandatory | Number of XID frames received. |
| 1.3.6.1.4.1.2.6.2.13.1.5.1.1.26 | ColumnibmappnNodeLsInMsgFrames | read-only | mandatory | Number of message (I-frame) frames received. |
| 1.3.6.1.4.1.2.6.2.13.1.5.1.1.27 | ColumnibmappnNodeLsOutXidBytes | read-only | mandatory | Number of XID bytes sent. |
| 1.3.6.1.4.1.2.6.2.13.1.5.1.1.28 | ColumnibmappnNodeLsOutMsgBytes | read-only | mandatory | Number of message (I-frame) bytes sent. |
| 1.3.6.1.4.1.2.6.2.13.1.5.1.1.29 | ColumnibmappnNodeLsOutXidFrames | read-only | mandatory | Number of XID frames sent. |
| 1.3.6.1.4.1.2.6.2.13.1.5.1.1.30 | ColumnibmappnNodeLsOutMsgFrames | read-only | mandatory | Number of message (I-frame) frames sent. |
| 1.3.6.1.4.1.2.6.2.13.1.5.1.1.31 | ColumnibmappnNodeLsEchoRsps | read-only | mandatory | Number of responses returned from adjacent link station. A response should be returned for each test frame sent by this node. Test frames are sent to adjacent … |
| 1.3.6.1.4.1.2.6.2.13.1.5.1.1.32 | ColumnibmappnNodeLsCurrentDelay | read-only | mandatory | The time that it took for the last test signal to be sent and returned from this link station to the adjacent links station. This time is represented in millis… |
| 1.3.6.1.4.1.2.6.2.13.1.5.1.1.33 | ColumnibmappnNodeLsMaxDelay | read-only | mandatory | The longest time it took for a test signal to be sent and returned from this link station to the adjacent links station. This time is represented in millisecon… |
| 1.3.6.1.4.1.2.6.2.13.1.5.1.1.34 | ColumnibmappnNodeLsMinDelay | read-only | mandatory | The shortest time it took for a test signal to be sent and returned from this link station to the adjacent links station. This time is represented in milliseco… |
| 1.3.6.1.4.1.2.6.2.13.1.5.1.1.35 | ColumnibmappnNodeLsMaxDelayTime | read-only | mandatory | The time (since system up in hundredth of seconds) when the longest delay occurred. This time can be used to identify when this high water mark occurred in rel… |
| 1.3.6.1.4.1.2.6.2.13.1.5.1.1.36 | ColumnibmappnNodeLsGoodXids | read-only | mandatory | The total number of successful XIDs that have occurred on this link station since the time it was started. |
| 1.3.6.1.4.1.2.6.2.13.1.5.1.1.37 | ColumnibmappnNodeLsBadXids | read-only | mandatory | The total number of unsuccessful XIDs that have occurred on this link station since the time it was started. |
| 1.3.6.1.4.1.2.6.2.13.1.5.1.1.38 | ColumnibmappnNodeLsSpecific | read-only | mandatory | Identifies the DLC specific OBJECT IDENTIFIER that can provide additional information. |
| 1.3.6.1.4.1.2.6.2.13.1.5.1.1.39 | ColumnibmappnNodeLsSubState | read-only | mandatory | State of this link station. |
| 1.3.6.1.4.1.2.6.2.13.1.5.1.1.40 | ColumnibmappnNodeLsStartTime | read-only | mandatory | The time (in hundredth of seconds) this link station has been active the last time since the time APPN was initialized. |
| 1.3.6.1.4.1.2.6.2.13.1.5.1.1.41 | ColumnibmappnNodeLsActiveTime | read-only | mandatory | The time (in hundredth of seconds) this link station has been in the active state. A zero value indicates the link station has never been active. |
| 1.3.6.1.4.1.2.6.2.13.1.5.1.1.42 | ColumnibmappnNodeLsCurrentStateTime | read-only | mandatory | The time (in hundredth of seconds) the link station is in the current state. |
| 1.3.6.1.4.1.2.6.2.13.1.5.2 | TableibmappnNodeLsIpTable | not-accessible | mandatory | Link station table (TCP/IP specific). |
| 1.3.6.1.4.1.2.6.2.13.1.5.2.1 | RowibmappnNodeLsIpEntry | not-accessible | mandatory | The IP Name is used as the index to this table. |
| 1.3.6.1.4.1.2.6.2.13.1.5.2.1.1 | ColumnibmappnNodeLsIpName | read-only | mandatory | Administratively-assigned name for this link station. The name can be from one to eight characters. |
| 1.3.6.1.4.1.2.6.2.13.1.5.2.1.2 | ColumnibmappnNodeLsIpState | read-only | mandatory | State of this link station. |
| 1.3.6.1.4.1.2.6.2.13.1.5.2.1.3 | ColumnibmappnNodeLsLocalIpAddr | read-only | mandatory | Local IP address. |
| 1.3.6.1.4.1.2.6.2.13.1.5.2.1.4 | ColumnibmappnNodeLsLocalIpPortNum | read-only | mandatory | Local TCP/IP port number. The default listening port will be administratively assigned and will dynamically change if this node initiates a session with adjace… |
| 1.3.6.1.4.1.2.6.2.13.1.5.2.1.5 | ColumnibmappnNodeLsRemoteIpAddr | read-only | mandatory | Remote IP address. |
| 1.3.6.1.4.1.2.6.2.13.1.5.2.1.6 | ColumnibmappnNodeLsRemoteIpPortNum | read-only | mandatory | Remote TCP/IP port number. |
| 1.3.6.1.4.1.2.6.2.13.1.5.3 | TableibmappnNodeLsDlsTable | not-accessible | mandatory | Ls Table (DLS specific). |
| 1.3.6.1.4.1.2.6.2.13.1.5.3.1 | RowibmappnNodeLsDlsEntry | not-accessible | mandatory | The DLS Name is used as the index to this table. |
| 1.3.6.1.4.1.2.6.2.13.1.5.3.1.1 | ColumnibmappnNodeLsDlsName | read-only | mandatory | Administratively-assigned name for this link station. The name can be from one to eight characters. |
| 1.3.6.1.4.1.2.6.2.13.1.5.3.1.2 | ColumnibmappnNodeLsDlsState | read-only | mandatory | State of this link station. |
| 1.3.6.1.4.1.2.6.2.13.1.5.3.1.3 | ColumnibmappnNodeLsLocalDlsMac | read-only | mandatory | Local MAC address. |
| 1.3.6.1.4.1.2.6.2.13.1.5.3.1.4 | ColumnibmappnNodeLsLocalDlsSap | read-only | mandatory | Local SAP address. |
| 1.3.6.1.4.1.2.6.2.13.1.5.3.1.5 | ColumnibmappnNodeLsRemoteDlsMac | read-only | mandatory | Remote MAC address. |
| 1.3.6.1.4.1.2.6.2.13.1.5.3.1.6 | ColumnibmappnNodeLsRemoteDlsSap | read-only | mandatory | Remote SAP address. |
| 1.3.6.1.4.1.2.6.2.13.1.5.4 | TableibmappnNodeLsTrTable | not-accessible | mandatory | Ls Table (Token Ring specific). |
| 1.3.6.1.4.1.2.6.2.13.1.5.4.1 | RowibmappnNodeLsTrEntry | not-accessible | mandatory | The TR Name is used as the index to this table. |
| 1.3.6.1.4.1.2.6.2.13.1.5.4.1.1 | ColumnibmappnNodeLsTrName | read-only | mandatory | Administratively-assigned name for this link station. The name can be from one to eight characters. |
| 1.3.6.1.4.1.2.6.2.13.1.5.4.1.2 | ColumnibmappnNodeLsTrState | read-only | mandatory | State of this link station. |
| 1.3.6.1.4.1.2.6.2.13.1.5.4.1.3 | ColumnibmappnNodeLsLocalTrMac | read-only | mandatory | Local MAC address. |
| 1.3.6.1.4.1.2.6.2.13.1.5.4.1.4 | ColumnibmappnNodeLsLocalTrSap | read-only | mandatory | Local SAP address. |
| 1.3.6.1.4.1.2.6.2.13.1.5.4.1.5 | ColumnibmappnNodeLsRemoteTrMac | read-only | mandatory | Remote MAC address. |
| 1.3.6.1.4.1.2.6.2.13.1.5.4.1.6 | ColumnibmappnNodeLsRemoteTrSap | read-only | mandatory | Remote SAP address. |
| 1.3.6.1.4.1.2.6.2.13.1.5.5 | TableibmappnNodeLsStatusTable | not-accessible | mandatory | This table contains information related to exceptional and potential exceptional conditions that occur during the activation, XID exchange, and termination of … |
| 1.3.6.1.4.1.2.6.2.13.1.5.5.1 | RowibmappnNodeLsStatusEntry | not-accessible | mandatory | This table is indexed by the LsStatusIndex, which is an integer that is continuously updated until it eventually wraps. This provides the management station th… |
| 1.3.6.1.4.1.2.6.2.13.1.5.5.1.1 | ColumnibmappnNodeLsStatusIndex | read-only | mandatory | This index is continuous index this table. |
| 1.3.6.1.4.1.2.6.2.13.1.5.5.1.2 | ColumnibmappnNodeLsStatusTime | read-only | mandatory | Time (in hundreds of a second) since this node was last initialized. |
| 1.3.6.1.4.1.2.6.2.13.1.5.5.1.3 | ColumnibmappnNodeLsStatusLsName | read-only | mandatory | Administratively-assigned name for this link station. |
| 1.3.6.1.4.1.2.6.2.13.1.5.5.1.4 | ColumnibmappnNodeLsStatusCpName | read-only | mandatory | Administratively-assigned fully-qualified name of the adjacent node partner. This will be provided when the adjacent node has been defined at this node or when… |
| 1.3.6.1.4.1.2.6.2.13.1.5.5.1.5 | ColumnibmappnNodeLsStatusNodeId | read-only | mandatory | Adjacent Node id |
| 1.3.6.1.4.1.2.6.2.13.1.5.5.1.6 | ColumnibmappnNodeLsStatusTgNum | read-only | mandatory | Number associated with the TG to this link station with a range from 0 to 256. A value of 256 indicates the tg number has not been negotiated and is unknown at… |
| 1.3.6.1.4.1.2.6.2.13.1.5.5.1.7 | ColumnibmappnNodeLsStatusGeneralSense | read-only | mandatory | The error sense code associated with the start sequence of activation of a link up to the beginning of the XID sequence. |
| 1.3.6.1.4.1.2.6.2.13.1.5.5.1.8 | ColumnibmappnNodeLsStatusNofRetry | read-only | mandatory | Indicates whether Node Operator Facility will retry the start request to activate the link. |
| 1.3.6.1.4.1.2.6.2.13.1.5.5.1.9 | ColumnibmappnNodeLsStatusEndSense | read-only | mandatory | The sense code associated with the termination of the link connection to adjacent node. This includes all sense information included in the disconnect recieved… |
| 1.3.6.1.4.1.2.6.2.13.1.5.5.1.10 | ColumnibmappnNodeLsStatusXidLocalSense | read-only | mandatory | The error sense code associated with the rejection of the XID. |
| 1.3.6.1.4.1.2.6.2.13.1.5.5.1.11 | ColumnibmappnNodeLsStatusXidRemoteSense | read-only | mandatory | The error sense code adjacent node returned to this node indicating the reason the XID was rejected. |
| 1.3.6.1.4.1.2.6.2.13.1.5.5.1.12 | ColumnibmappnNodeLsStatusXidByteInError | read-only | mandatory | This identifies the actual byte in the XID that caused the error. The value of zero (0) indicates that the variable has no meaning. |
| 1.3.6.1.4.1.2.6.2.13.1.5.5.1.13 | ColumnibmappnNodeLsStatusXidBitInError | read-only | mandatory | This identifies the actual bit within the error byte of the XID. This only has meaning when the byte in error is greater than zero. |
| 1.3.6.1.4.1.2.6.2.13.1.5.5.1.14 | ColumnibmappnNodeLsStatusDlcType | read-only | mandatory | This identifies DLC type that was being used when error occurred. This also is used to the format of the local and remote address provided. other = free form D… |
| 1.3.6.1.4.1.2.6.2.13.1.5.5.1.15 | ColumnibmappnNodeLsStatusLocalAddr | read-only | mandatory | This contains a displayable string that identifies the DLC type and appropriate address. See DlcType above for details of the format. |
| 1.3.6.1.4.1.2.6.2.13.1.5.5.1.16 | ColumnibmappnNodeLsStatusRemoteAddr | read-only | mandatory | This contains a displayable string that identifies the DLC type and appropriate address. See DlcType above for details of the format. |
| 1.3.6.1.4.1.2.6.2.13.1.6 | NodeibmappnSnmpInformation | |||
| 1.3.6.1.4.1.2.6.2.13.1.6.1 | ScalaribmappnSnmpInPkts | read-only | mandatory | Total number of messages delivered to the APPN SNMP sub-agent. |
| 1.3.6.1.4.1.2.6.2.13.1.6.2 | ScalaribmappnSnmpInGetRequests | read-only | mandatory | Total number of GET requests delivered to the APPN SNMP sub-agent. |
| 1.3.6.1.4.1.2.6.2.13.1.6.3 | ScalaribmappnSnmpInGetNexts | read-only | mandatory | Total number of GETNEXT requests delivered to the APPN SNMP sub-agent. |
| 1.3.6.1.4.1.2.6.2.13.1.6.4 | ScalaribmappnSnmpInSetRequests | read-only | mandatory | Total number of SET requests delivered to the APPN SNMP sub-agent. |
| 1.3.6.1.4.1.2.6.2.13.1.6.5 | ScalaribmappnSnmpInTotalVars | read-only | mandatory | Total number of VARIABLES included in both GET and GETNEXT requests to the APPN SNMP sub-agent. |
| 1.3.6.1.4.1.2.6.2.13.1.6.6 | ScalaribmappnSnmpInGetVars | read-only | mandatory | Total number of VARIBLES included in all GET requests to the APPN SNMP sub-agent. |
| 1.3.6.1.4.1.2.6.2.13.1.6.7 | ScalaribmappnSnmpInGetNextVars | read-only | mandatory | Total number of VARIABLES included in all GETNEXT requests to the APPN SNMP sub-agent. |
| 1.3.6.1.4.1.2.6.2.13.1.6.8 | ScalaribmappnSnmpInSetVars | read-only | mandatory | Total number of VARIBLES included in all SET requests to the APPN SNMP sub-agent. |
| 1.3.6.1.4.1.2.6.2.13.1.6.9 | ScalaribmappnSnmpOutNoSuchNames | read-only | mandatory | Total number of VARIABLES that could not be found by the APPN SNMP sub-agent. |
| 1.3.6.1.4.1.2.6.2.13.1.6.10 | ScalaribmappnSnmpOutGenErrs | read-only | mandatory | Total number of undefined errors that occurred processing SNMP request to the APPN SNMP sub-agent. |
| 1.3.6.1.4.1.2.6.2.13.1.7 | NodeibmappnMemoryUse | |||
| 1.3.6.1.4.1.2.6.2.13.1.7.1 | ScalaribmappnMemorySize | read-only | mandatory | Size of the shared storage segment, as obtained by storage management from the underlying operating system. |
| 1.3.6.1.4.1.2.6.2.13.1.7.2 | ScalaribmappnMemoryUsed | read-only | mandatory | Number of bytes in the segment that are currently allocated to process. |
| 1.3.6.1.4.1.2.6.2.13.1.7.3 | ScalaribmappnMemoryWarnThresh | read-only | mandatory | Allocation threshold beyond which storage management considers the storage resources to be constrained. |
| 1.3.6.1.4.1.2.6.2.13.1.7.4 | ScalaribmappnMemoryCritThresh | read-only | mandatory | Allocation threshold beyond which storage management considers the storage resources to be critically constrained. |
| 1.3.6.1.4.1.2.6.2.13.1.8 | NodeibmappnXidInformation | |||
| 1.3.6.1.4.1.2.6.2.13.1.8.1 | ScalaribmappnNodeDefLsGoodXids | read-only | mandatory | The current number of successfull XIDs that have occurred on all defined link stations since the last time this node was initialized. |
| 1.3.6.1.4.1.2.6.2.13.1.8.2 | ScalaribmappnNodeDefLsBadXids | read-only | mandatory | The current number of unsuccessfull XIDs that have occurred on all defined link stations since the last time this node was initialized. |
| 1.3.6.1.4.1.2.6.2.13.1.8.3 | ScalaribmappnNodeDynLsGoodXids | read-only | mandatory | The current number of successfull XIDs that have occurred on all dynamic link stations since the last time this node was initialized. |
| 1.3.6.1.4.1.2.6.2.13.1.8.4 | ScalaribmappnNodeDynLsBadXids | read-only | mandatory | The current number of unsuccessfull XIDs that have occurred on all dynamic link stations since the last time this node was initialized. |
| 1.3.6.1.4.1.2.6.2.13.2 | NodeibmappnNn | |||
| 1.3.6.1.4.1.2.6.2.13.2.1 | NodeibmappnNnTopo | |||
| 1.3.6.1.4.1.2.6.2.13.2.1.1 | ScalaribmappnNnTopoMaxNodes | read-only | mandatory | Maximum number of nodes allowed in the APPN topology database. This administratively assigned value must be equal to or greater than the maximum total number o… |
| 1.3.6.1.4.1.2.6.2.13.2.1.2 | ScalaribmappnNnTopoCurNumNodes | read-only | mandatory | Current number of nodes in this node's topology database. If this value exceeds the maximum number of nodes allowed (NnTopoMaxNodes), APPN alert CPDB002 is iss… |
| 1.3.6.1.4.1.2.6.2.13.2.1.3 | ScalaribmappnNnTopoInTdus | read-only | mandatory | Total number of TDUs received from all adjacent NN since last initialization. |
| 1.3.6.1.4.1.2.6.2.13.2.1.4 | ScalaribmappnNnTopoOutTdus | read-only | mandatory | Total number of TDUs built by this node to be sent to all adjacent NN since last initialization. |
| 1.3.6.1.4.1.2.6.2.13.2.1.5 | ScalaribmappnNnTopoNodeLowRsns | read-only | mandatory | Total number of topology node updates received by this node with a RSN less than the current RSN. Both even and odd RSN are included in this count. These TDUs … |
| 1.3.6.1.4.1.2.6.2.13.2.1.6 | ScalaribmappnNnTopoNodeEqualRsns | read-only | mandatory | Total number of topology node updates received by this node with a RSN equal to the current RSN. Both even and odd RSN are included in this count. These TDUs a… |
| 1.3.6.1.4.1.2.6.2.13.2.1.7 | ScalaribmappnNnTopoNodeGoodHighRsns | read-only | mandatory | Total number of topology node updates received by this node with a RSN greater than the current RSN. This results in updating this nodes topology and broadcast… |
| 1.3.6.1.4.1.2.6.2.13.2.1.8 | ScalaribmappnNnTopoNodeBadHighRsns | read-only | mandatory | Total number of topology node updates received by this node with an odd RSN greater than the current RSN. These updates represent a topology inconsistency dete… |
| 1.3.6.1.4.1.2.6.2.13.2.1.9 | ScalaribmappnNnTopoNodeStateUpdates | read-only | mandatory | Total number of topology Node records built as a result of internally detected node state changes that affect APPN topology and routing. Updates are sent via T… |
| 1.3.6.1.4.1.2.6.2.13.2.1.10 | ScalaribmappnNnTopoNodeErrors | read-only | mandatory | Total number of topology node records inconsistencies detected by this node. This occurs when this node attempts to update its topology database and detects a … |
| 1.3.6.1.4.1.2.6.2.13.2.1.11 | ScalaribmappnNnTopoNodeTimerUpdates | read-only | mandatory | Total number of topology node records built for this node's resource due to timer updates. Updates are sent via TDUs to all adjacent network nodes. These updat… |
| 1.3.6.1.4.1.2.6.2.13.2.1.12 | ScalaribmappnNnTopoNodePurges | read-only | mandatory | Total number of topology node records purged from this node's topology database. This occurs when a node has not been updated in a specified amount of time. Th… |
| 1.3.6.1.4.1.2.6.2.13.2.1.13 | ScalaribmappnNnTopoTgLowRsns | read-only | mandatory | Total number of topology TG updates received by this node with a RSN less than the current RSN. Both even and odd RSN are included in this count. These TDUs ar… |
| 1.3.6.1.4.1.2.6.2.13.2.1.14 | ScalaribmappnNnTopoTgEqualRsns | read-only | mandatory | Total number of topology TG updates received by this node with a RSN equal to the current RSN. Both even and odd RSN are included in this count. These TDUs are… |
| 1.3.6.1.4.1.2.6.2.13.2.1.15 | ScalaribmappnNnTopoTgGoodHighRsns | read-only | mandatory | Total number of topology TG updates received by this node with a RSN greater than the current RSN. This results in updating this nodes topology and broadcastin… |
| 1.3.6.1.4.1.2.6.2.13.2.1.16 | ScalaribmappnNnTopoTgBadHighRsns | read-only | mandatory | Total number of topology TG updates received by this node with an odd RSN greater than the current RSN. These updates represent a topology inconsistency detect… |
| 1.3.6.1.4.1.2.6.2.13.2.1.17 | ScalaribmappnNnTopoTgStateUpdates | read-only | mandatory | Total number of topology TG records built as a result of internally detected node state changes that affect APPN topology and routing. Updates are sent via TDU… |
| 1.3.6.1.4.1.2.6.2.13.2.1.18 | ScalaribmappnNnTopoTgErrors | read-only | mandatory | Total number of topology TG records inconsistencies detected by this node. This occurs when this node attempts to update its topology database and detects a da… |
| 1.3.6.1.4.1.2.6.2.13.2.1.19 | ScalaribmappnNnTopoTgTimerUpdates | read-only | mandatory | Total number of topology TG records built for this node's resource due to timer updates. Updates are sent via TDUs to all adjacent network nodes. These updates… |
| 1.3.6.1.4.1.2.6.2.13.2.1.20 | ScalaribmappnNnTopoTgPurges | read-only | mandatory | Total number of topology TG records purged from this node's topology database. This occurs when a TG has not been updated in a specified amount of time. The ow… |
| 1.3.6.1.4.1.2.6.2.13.2.1.21 | ScalaribmappnNnTopoTotalRouteCalcs | read-only | mandatory | Number of routes calculated for all class of services since the last initialization. |
| 1.3.6.1.4.1.2.6.2.13.2.1.22 | ScalaribmappnNnTopoTotalRouteRejs | read-only | mandatory | Number of route requests for all class of services that could not be calculated since last initialization. |
| 1.3.6.1.4.1.2.6.2.13.2.1.23 | TableibmappnNnTopoRouteTable | not-accessible | mandatory | Table containing an entry for every Class of Service that it has calculated a route for. |
| 1.3.6.1.4.1.2.6.2.13.2.1.23.1 | RowibmappnNnTopoRouteEntry | not-accessible | mandatory | The Class of Service name is the index for this table. |
| 1.3.6.1.4.1.2.6.2.13.2.1.23.1.1 | ColumnibmappnNnTopoRouteCos | read-only | mandatory | The Class of Service for the route. |
| 1.3.6.1.4.1.2.6.2.13.2.1.23.1.2 | ColumnibmappnNnTopoRouteTrees | read-only | mandatory | Number of routes tree caches built for this Class of Service since the last initialization. |
| 1.3.6.1.4.1.2.6.2.13.2.1.23.1.3 | ColumnibmappnNnTopoRouteCalcs | read-only | mandatory | Number of routes calculated since last initialization. |
| 1.3.6.1.4.1.2.6.2.13.2.1.23.1.4 | ColumnibmappnNnTopoRouteRejs | read-only | mandatory | Number of route requests that could not be calculated since last initialization. |
| 1.3.6.1.4.1.2.6.2.13.2.2 | TableibmappnNnAdjNodeTable | not-accessible | mandatory | Table containing an entry for every node. The information kept in this table is the last FRSN sent and received, the status of the CP-CP sessions, and a gauge … |
| 1.3.6.1.4.1.2.6.2.13.2.2.1 | RowibmappnNnAdjNodeEntry | not-accessible | mandatory | The adjacent node name is the index for this table. |
| 1.3.6.1.4.1.2.6.2.13.2.2.1.1 | ColumnibmappnNnAdjNodeAdjName | read-only | mandatory | An administratively-assigned fully-qualified name of this node's adjacent network node. |
| 1.3.6.1.4.1.2.6.2.13.2.2.1.2 | ColumnibmappnNnAdjNodeCpCpSessStatus | read-only | mandatory | Indicates the state of CP-CP sessions between this node and adjacent network and end nodes. Incative indicates no CP-CP sessions exists between this node and t… |
| 1.3.6.1.4.1.2.6.2.13.2.2.1.3 | ColumnibmappnNnAdjNodeOutOfSeqTdus | read-only | mandatory | Number of out of sequence Topology Database Updates (TDUs). In a quiesced state, this value is zero. In normal operation, the value varies depending on the net… |
| 1.3.6.1.4.1.2.6.2.13.2.2.1.4 | ColumnibmappnNnAdjNodeLastFrsnSent | read-only | mandatory | Flow reduction sequence numbers (FRSNs) are associated with Topology Database Updates (TDUs) and are unique only within each APPN network node. A TDU can be as… |
| 1.3.6.1.4.1.2.6.2.13.2.2.1.5 | ColumnibmappnNnAdjNodeLastFrsnRcvd | read-only | mandatory | Flow reduction sequence numbers (FRSNs) are associated with Topology Database Updates (TDUs) and are unique only within each APPN network node. A TDU can be as… |
| 1.3.6.1.4.1.2.6.2.13.2.3 | NodeibmappnNnTopology | |||
| 1.3.6.1.4.1.2.6.2.13.2.3.1 | TableibmappnNnTopologyTable | not-accessible | mandatory | Portion of the APPN routing table that describes all of the APPN network nodes and virtual nodes known to this node. |
| 1.3.6.1.4.1.2.6.2.13.2.3.1.1 | RowibmappnNnTopologyEntry | not-accessible | mandatory | The fully-qualified node name is used to index this table. |
| 1.3.6.1.4.1.2.6.2.13.2.3.1.1.1 | ColumnibmappnNnNodeName | read-only | mandatory | Administratively-assigned network name that is locally defined at each network node in the format NETID.CPNAME. |
| 1.3.6.1.4.1.2.6.2.13.2.3.1.1.2 | ColumnibmappnNnNodeFrsn | read-only | mandatory | Flow reduction sequence numbers (FRSNs) are associated with Topology Database Updates (TDUs) and are unique only within each APPN network node. A TDU can be as… |
| 1.3.6.1.4.1.2.6.2.13.2.3.1.1.3 | ColumnibmappnNnNodeEntryTimeLeft | read-only | mandatory | Number of days before deletion of this network node entry. Range is 0-31. |
| 1.3.6.1.4.1.2.6.2.13.2.3.1.1.4 | ColumnibmappnNnNodeType | read-only | mandatory | Type of APPN node. |
| 1.3.6.1.4.1.2.6.2.13.2.3.1.1.5 | ColumnibmappnNnNodeRsn | read-only | mandatory | Resource sequence number that is assigned and controlled by the network node that owns this resource. This is always an even 32-bit number unless an error has … |
| 1.3.6.1.4.1.2.6.2.13.2.3.1.1.6 | ColumnibmappnNnNodeRouteAddResist | read-only | mandatory | Route addition resistance indicates the relative desirability of using this node for intermediate session traffic. The value, which can be any integer 0-255, i… |
| 1.3.6.1.4.1.2.6.2.13.2.3.1.1.7 | ColumnibmappnNnNodeCongested | read-only | mandatory | Indicates whether this node is congested. This node is not be included in route selection by other nodes when this congestion exists. |
| 1.3.6.1.4.1.2.6.2.13.2.3.1.1.8 | ColumnibmappnNnNodeIsrDepleted | read-only | mandatory | Indicates whether intermediate session routing resources are depleted. This node is not included in intermediate route selection by other nodes when resources … |
| 1.3.6.1.4.1.2.6.2.13.2.3.1.1.9 | ColumnibmappnNnNodeEndptDepleted | read-only | mandatory | Indicates whether session endpoint resources are depleted. |
| 1.3.6.1.4.1.2.6.2.13.2.3.1.1.10 | ColumnibmappnNnNodeQuiescing | read-only | mandatory | Indicates whether the node is quiescing. This node is not included in route selection by other nodes when the node is quiescing. |
| 1.3.6.1.4.1.2.6.2.13.2.3.1.1.11 | ColumnibmappnNnNodeGateway | read-only | mandatory | Indicates whether the node provide gateway functions. |
| 1.3.6.1.4.1.2.6.2.13.2.3.1.1.12 | ColumnibmappnNnNodeCentralDirectory | read-only | mandatory | Indicates whether the node is central directory. |
| 1.3.6.1.4.1.2.6.2.13.2.3.1.1.13 | ColumnibmappnNnNodeIsr | read-only | mandatory | Indicates whether the node supports intermediate session routing (ISR). |
| 1.3.6.1.4.1.2.6.2.13.2.3.1.1.14 | ColumnibmappnNnNodeChainSupport | read-only | mandatory | Indicates whether the node supports chaining. |
| 1.3.6.1.4.1.2.6.2.13.2.3.2 | TableibmappnNnTgTopologyTable | not-accessible | mandatory | Portion of the APPN topology database that describes all of the APPN transmissions groups used by the APPN network nodes. |
| 1.3.6.1.4.1.2.6.2.13.2.3.2.1 | RowibmappnNnTgTopologyEntry | not-accessible | mandatory | This table requires three indexes to provide a unique index. The indexes are the owning or originating CPname, the destination CPname, and the TG number. |
| 1.3.6.1.4.1.2.6.2.13.2.3.2.1.1 | ColumnibmappnNnTgOwner | read-only | mandatory | Administratively-assigned name for the originating node for this TG. The format is NETID.CPNAME and is the same name specified in the node table. |
| 1.3.6.1.4.1.2.6.2.13.2.3.2.1.2 | ColumnibmappnNnTgDest | read-only | mandatory | Administratively-assigned fully-qualified network name for the destination node for this TG. |
| 1.3.6.1.4.1.2.6.2.13.2.3.2.1.3 | ColumnibmappnNnTgNum | read-only | mandatory | Number associated with this transmission group. Range is 0-255. |
| 1.3.6.1.4.1.2.6.2.13.2.3.2.1.4 | ColumnibmappnNnTgFrsn | read-only | mandatory | Flow reduction sequence numbers (FRSNs) are associated with Topology Database Updates (TDUs) and are unique only within each APPN network node. A TDU can be as… |
| 1.3.6.1.4.1.2.6.2.13.2.3.2.1.5 | ColumnibmappnNnTgEntryTimeLeft | read-only | mandatory | Number of days before deletion of this network node TG entry. Range is 0-31. |
| 1.3.6.1.4.1.2.6.2.13.2.3.2.1.6 | ColumnibmappnNnTgDestVirtual | read-only | mandatory | Indicates whether the destination node is a virtual node. |
| 1.3.6.1.4.1.2.6.2.13.2.3.2.1.7 | ColumnibmappnNnTgDlcData | read-only | mandatory | DLC specific data related to the link connection network. Token-Ring - MAC/SAP X.25 Switched - dial digits X.21 Switched - dial digits Circuit Swtch - dial dig… |
| 1.3.6.1.4.1.2.6.2.13.2.3.2.1.8 | ColumnibmappnNnTgRsn | read-only | mandatory | Current owning node's resource sequence number for this resource. |
| 1.3.6.1.4.1.2.6.2.13.2.3.2.1.9 | ColumnibmappnNnTgOperational | read-only | mandatory | Indicates whether the transmission group is operational. |
| 1.3.6.1.4.1.2.6.2.13.2.3.2.1.10 | ColumnibmappnNnTgQuiescing | read-only | mandatory | Indicates whether the transmission group is quiescing. |
| 1.3.6.1.4.1.2.6.2.13.2.3.2.1.11 | ColumnibmappnNnTgCpCpSession | read-only | mandatory | Indicates whether CP-CP sessions are supported on this TG. |
| 1.3.6.1.4.1.2.6.2.13.2.3.2.1.12 | ColumnibmappnNnTgEffCap | read-only | mandatory | The effective capacity is an integer value that indicates the kilo bits per second. It is derived from the link bandwidth and maximum load factor with the rang… |
| 1.3.6.1.4.1.2.6.2.13.2.3.2.1.13 | ColumnibmappnNnTgConnCost | read-only | mandatory | Cost per connect time: a value representing the relative cost per unit of time to use the TG. Range is from 0, which means no cost, to 255, which indicates max… |
| 1.3.6.1.4.1.2.6.2.13.2.3.2.1.14 | ColumnibmappnNnTgByteCost | read-only | mandatory | Relative cost of transmitting a byte over this link. Range is from 0 (lowest cost) to 255. This is an administratively assigned value associated with this TG. |
| 1.3.6.1.4.1.2.6.2.13.2.3.2.1.15 | ColumnibmappnNnTgSecurity | read-only | mandatory | The security is represented as an integer with a range of 1 thru 255 with the most common values enumerated as defined above. This is an administratively assig… |
| 1.3.6.1.4.1.2.6.2.13.2.3.2.1.16 | ColumnibmappnNnTgDelay | read-only | mandatory | Relative amount of time that it takes for a signal to travel the length of the logical link. This time is represented in micro seconds, with some of the more c… |
| 1.3.6.1.4.1.2.6.2.13.2.3.2.1.17 | ColumnibmappnNnTgModemClass | read-only | mandatory | This is used to have multiple images for a connection network. For a connection network it is the same as in the TG vector; for a non-connection network it is … |
| 1.3.6.1.4.1.2.6.2.13.2.3.2.1.18 | ColumnibmappnNnTgUsr1 | read-only | mandatory | First user-defined TG characteristic for this TG with a range of 0-255. This is an administratively assigned value associated with this TG. |
| 1.3.6.1.4.1.2.6.2.13.2.3.2.1.19 | ColumnibmappnNnTgUsr2 | read-only | mandatory | Second user-defined TG characteristic for this TG with a range of 0-255. This is an administratively assigned value associated with this TG. |
| 1.3.6.1.4.1.2.6.2.13.2.3.2.1.20 | ColumnibmappnNnTgUsr3 | read-only | mandatory | Third user-defined TG characteristic for this TG with a range of 0-255. This is an administratively assigned value associated with this TG. |
| 1.3.6.1.4.1.2.6.2.13.2.3.3 | TableibmappnNnTopologyFRTable | not-accessible | mandatory | Portion of the APPN routing table that describes all of the APPN network nodes and virtual nodes known to this node. |
| 1.3.6.1.4.1.2.6.2.13.2.3.3.1 | RowibmappnNnTopologyFREntry | not-accessible | mandatory | This table is indexed by two columns: FRSN, followed by fully-qualified node name. |
| 1.3.6.1.4.1.2.6.2.13.2.3.3.1.1 | ColumnibmappnNnNodeFRName | read-only | mandatory | Administratively-assigned network name that is locally defined at each network node in the format NETID.CPNAME. |
| 1.3.6.1.4.1.2.6.2.13.2.3.3.1.2 | ColumnibmappnNnNodeFRFrsn | read-only | mandatory | Flow reduction sequence numbers (FRSNs) are associated with Topology Database Updates (TDUs) and are unique only within each APPN network node. A TDU can be as… |
| 1.3.6.1.4.1.2.6.2.13.2.3.3.1.3 | ColumnibmappnNnNodeFREntryTimeLeft | read-only | mandatory | Number of days before deletion of this network node entry. Range is 0-31. |
| 1.3.6.1.4.1.2.6.2.13.2.3.3.1.4 | ColumnibmappnNnNodeFRType | read-only | mandatory | Type of APPN node. |
| 1.3.6.1.4.1.2.6.2.13.2.3.3.1.5 | ColumnibmappnNnNodeFRRsn | read-only | mandatory | Resource sequence number that is assigned and controlled by the network node that owns this resource. This is always an even 32-bit number unless an error has … |
| 1.3.6.1.4.1.2.6.2.13.2.3.3.1.6 | ColumnibmappnNnNodeFRRouteAddResist | read-only | mandatory | Route addition resistance indicates the relative desirability of using this node for intermediate session traffic. The value, which can be any integer 0-255, i… |
| 1.3.6.1.4.1.2.6.2.13.2.3.3.1.7 | ColumnibmappnNnNodeFRCongested | read-only | mandatory | Indicates whether this node is congested. This node is not be included in route selection by other nodes when this congestion exists. |
| 1.3.6.1.4.1.2.6.2.13.2.3.3.1.8 | ColumnibmappnNnNodeFRIsrDepleted | read-only | mandatory | Indicates whether intermediate session routing resources are depleted. This node is not included in intermediate route selection by other nodes when resources … |
| 1.3.6.1.4.1.2.6.2.13.2.3.3.1.9 | ColumnibmappnNnNodeFREndptDepleted | read-only | mandatory | Indicates whether session endpoint resources are depleted. |
| 1.3.6.1.4.1.2.6.2.13.2.3.3.1.10 | ColumnibmappnNnNodeFRQuiescing | read-only | mandatory | Indicates whether the node is quiescing. This node is not included in route selection by other nodes when the node is quiescing. |
| 1.3.6.1.4.1.2.6.2.13.2.3.3.1.11 | ColumnibmappnNnNodeFRGateway | read-only | mandatory | Indicates whether the node provide gateway functions. |
| 1.3.6.1.4.1.2.6.2.13.2.3.3.1.12 | ColumnibmappnNnNodeFRCentralDirectory | read-only | mandatory | Indicates whether the node is central directory. |
| 1.3.6.1.4.1.2.6.2.13.2.3.3.1.13 | ColumnibmappnNnNodeFRIsr | read-only | mandatory | Indicates whether the node supports intermediate session routing (ISR). |
| 1.3.6.1.4.1.2.6.2.13.2.3.3.1.14 | ColumnibmappnNnNodeFRChainSupport | read-only | mandatory | Indicates whether the node supports chaining. |
| 1.3.6.1.4.1.2.6.2.13.2.3.4 | TableibmappnNnTgTopologyFRTable | not-accessible | mandatory | Portion of the APPN topology database that describes all of the APPN transmissions groups used by the APPN network nodes. |
| 1.3.6.1.4.1.2.6.2.13.2.3.4.1 | RowibmappnNnTgTopologyFREntry | not-accessible | mandatory | This table is indexed by four columns: FRSN, TG owner fully-qualified node name, TG destination fully-qualified node name, and TG number. |
| 1.3.6.1.4.1.2.6.2.13.2.3.4.1.1 | ColumnibmappnNnTgFROwner | read-only | mandatory | Administratively-assigned name for the originating node for this TG. The format is NETID.CPNAME and is the same name specified in the node table. |
| 1.3.6.1.4.1.2.6.2.13.2.3.4.1.2 | ColumnibmappnNnTgFRDest | read-only | mandatory | Administratively-assigned fully-qualified network name for the destination node for this TG. |
| 1.3.6.1.4.1.2.6.2.13.2.3.4.1.3 | ColumnibmappnNnTgFRNum | read-only | mandatory | Number associated with this transmission group. Range is 0-255. |
| 1.3.6.1.4.1.2.6.2.13.2.3.4.1.4 | ColumnibmappnNnTgFRFrsn | read-only | mandatory | Flow reduction sequence numbers (FRSNs) are associated with Topology Database Updates (TDUs) and are unique only within each APPN network node. A TDU can be as… |
| 1.3.6.1.4.1.2.6.2.13.2.3.4.1.5 | ColumnibmappnNnTgFREntryTimeLeft | read-only | mandatory | Number of days before deletion of this network node TG entry. Range is 0-31. |
| 1.3.6.1.4.1.2.6.2.13.2.3.4.1.6 | ColumnibmappnNnTgFRDestVirtual | read-only | mandatory | Indicates whether the destination node is a virtual node. |
| 1.3.6.1.4.1.2.6.2.13.2.3.4.1.7 | ColumnibmappnNnTgFRDlcData | read-only | mandatory | DLC specific data related to the link connection network. Token-Ring - MAC/SAP X.25 Switched - dial digits X.21 Switched - dial digits Circuit Swtch - dial dig… |
| 1.3.6.1.4.1.2.6.2.13.2.3.4.1.8 | ColumnibmappnNnTgFRRsn | read-only | mandatory | Current owning node's resource sequence number for this resource. |
| 1.3.6.1.4.1.2.6.2.13.2.3.4.1.9 | ColumnibmappnNnTgFROperational | read-only | mandatory | Indicates whether the transmission group is operational. |
| 1.3.6.1.4.1.2.6.2.13.2.3.4.1.10 | ColumnibmappnNnTgFRQuiescing | read-only | mandatory | Indicates whether the transmission group is quiescing. |
| 1.3.6.1.4.1.2.6.2.13.2.3.4.1.11 | ColumnibmappnNnTgFRCpCpSession | read-only | mandatory | Indicates whether CP-CP sessions are supported on this TG. |
| 1.3.6.1.4.1.2.6.2.13.2.3.4.1.12 | ColumnibmappnNnTgFREffCap | read-only | mandatory | The effective capacity is an integer value that indicates the kilo bits per second. It is derived from the link bandwidth and maximum load factor with the rang… |
| 1.3.6.1.4.1.2.6.2.13.2.3.4.1.13 | ColumnibmappnNnTgFRConnCost | read-only | mandatory | Cost per connect time: a value representing the relative cost per unit of time to use the TG. Range is from 0, which means no cost, to 255, which indicates max… |
| 1.3.6.1.4.1.2.6.2.13.2.3.4.1.14 | ColumnibmappnNnTgFRByteCost | read-only | mandatory | Relative cost of transmitting a byte over this link. Range is from 0 (lowest cost) to 255. This is an administratively assigned value associated with this TG. |
| 1.3.6.1.4.1.2.6.2.13.2.3.4.1.15 | ColumnibmappnNnTgFRSecurity | read-only | mandatory | The security is represented as an integer with a range of 1 thru 255 with the most common values enumerated as defined above. This is an administratively assig… |
| 1.3.6.1.4.1.2.6.2.13.2.3.4.1.16 | ColumnibmappnNnTgFRDelay | read-only | mandatory | Relative amount of time that it takes for a signal to travel the length of the logical link. This time is represented in micro seconds, with some of the more c… |
| 1.3.6.1.4.1.2.6.2.13.2.3.4.1.17 | ColumnibmappnNnTgFRModemClass | read-only | mandatory | This is used to have multiple images for a connection network. For a connection network it is the same as in the TG vector; for a non-connection network it is … |
| 1.3.6.1.4.1.2.6.2.13.2.3.4.1.18 | ColumnibmappnNnTgFRUsr1 | read-only | mandatory | First user-defined TG characteristic for this TG with a range of 0-255. This is an administratively assigned value associated with this TG. |
| 1.3.6.1.4.1.2.6.2.13.2.3.4.1.19 | ColumnibmappnNnTgFRUsr2 | read-only | mandatory | Second user-defined TG characteristic for this TG with a range of 0-255. This is an administratively assigned value associated with this TG. |
| 1.3.6.1.4.1.2.6.2.13.2.3.4.1.20 | ColumnibmappnNnTgFRUsr3 | read-only | mandatory | Third user-defined TG characteristic for this TG with a range of 0-255. This is an administratively assigned value associated with this TG. |
| 1.3.6.1.4.1.2.6.2.13.3 | NodeibmappnLocalTopology | |||
| 1.3.6.1.4.1.2.6.2.13.3.1 | NodeibmappnLocalThisNode | |||
| 1.3.6.1.4.1.2.6.2.13.3.1.1 | NodeibmappnLocalGeneral | |||
| 1.3.6.1.4.1.2.6.2.13.3.1.1.1 | ScalaribmappnLocalNodeName | read-only | mandatory | Administratively-assigned fully-qualified name for this node. Format is NETID.CPNAME. |
| 1.3.6.1.4.1.2.6.2.13.3.1.1.2 | ScalaribmappnLocalNodeType | read-only | mandatory | Type of APPN node. |
| 1.3.6.1.4.1.2.6.2.13.3.1.2 | NodeibmappnLocalNnSpecific | |||
| 1.3.6.1.4.1.2.6.2.13.3.1.2.1 | ScalaribmappnLocalNnRsn | read-only | mandatory | Resource sequence number is assigned and controlled by the network node that owns this resource. This is always an even unsigned number unless an error has occ… |
| 1.3.6.1.4.1.2.6.2.13.3.1.2.2 | ScalaribmappnLocalNnRouteAddResist | read-only | mandatory | Route addition resistance indicates the relative desirability of using this node for intermediate session traffic. The value, which can be any integer 0-255, i… |
| 1.3.6.1.4.1.2.6.2.13.3.1.2.3 | ScalaribmappnLocalNnCongested | read-only | mandatory | Indicates whether this node is congested. Other network nodes stop routing traffic to this node while this flag is on. |
| 1.3.6.1.4.1.2.6.2.13.3.1.2.4 | ScalaribmappnLocalNnIsrDepleted | read-only | mandatory | Indicate whether intermediated session routing resources are depleted. Other network nodes stop routing traffic through this node while this flag is on. |
| 1.3.6.1.4.1.2.6.2.13.3.1.2.5 | ScalaribmappnLocalNnEndptDepleted | read-only | mandatory | Indicates whether session endpoint resources are depleted. |
| 1.3.6.1.4.1.2.6.2.13.3.1.2.6 | ScalaribmappnLocalNnQuiescing | read-only | mandatory | Indicates whether the node is quiescing. |
| 1.3.6.1.4.1.2.6.2.13.3.1.2.7 | ScalaribmappnLocalNnGateway | read-only | mandatory | Indicates whether the node is a gateway. |
| 1.3.6.1.4.1.2.6.2.13.3.1.2.8 | ScalaribmappnLocalNnCentralDirectory | read-only | mandatory | Indicates whether the node is a central directory. |
| 1.3.6.1.4.1.2.6.2.13.3.1.2.9 | ScalaribmappnLocalNnIsr | read-only | mandatory | Indicates whether the node supports intermediate session routing. |
| 1.3.6.1.4.1.2.6.2.13.3.1.2.10 | ScalaribmappnLocalNnChainSupport | read-only | mandatory | Indicates whether the node supports chaining. |
| 1.3.6.1.4.1.2.6.2.13.3.1.2.11 | ScalaribmappnLocalNnFrsn | read-only | mandatory | Flow reduction sequence numbers (FRSNs) are associated with Topology Database Updates (TDUs) and are unique only within each APPN network node. A TDU can be as… |
| 1.3.6.1.4.1.2.6.2.13.3.1.3 | NodeibmappnLocalTg | |||
| 1.3.6.1.4.1.2.6.2.13.3.1.3.1 | TableibmappnLocalTgTable | not-accessible | mandatory | TG Table describes all of the TGs owned by this node. The TG destination can be a virtual node, network node, len, or end node. |
| 1.3.6.1.4.1.2.6.2.13.3.1.3.1.1 | RowibmappnLocalTgEntry | not-accessible | mandatory | This table is indexed by the destination CPname and the TG number. |
| 1.3.6.1.4.1.2.6.2.13.3.1.3.1.1.1 | ColumnibmappnLocalTgDest | read-only | mandatory | Administratively-assigned name for the destination node for this TG. This is the fully-qualified network node name. |
| 1.3.6.1.4.1.2.6.2.13.3.1.3.1.1.2 | ColumnibmappnLocalTgNum | read-only | mandatory | Number associated with this transmission group. |
| 1.3.6.1.4.1.2.6.2.13.3.1.3.1.1.3 | ColumnibmappnLocalTgDestVirtual | read-only | mandatory | Indicates whether the destination node is a Virtual node. |
| 1.3.6.1.4.1.2.6.2.13.3.1.3.1.1.4 | ColumnibmappnLocalTgDlcData | read-only | mandatory | DLC specific data related to the link connection network. Token-Ring - MAC/SAP X.25 Switched - dial digits X.21 Switched - dial digits Circuit Swtch - dial dig… |
| 1.3.6.1.4.1.2.6.2.13.3.1.3.1.1.5 | ColumnibmappnLocalTgRsn | read-only | mandatory | The resource sequence number is assigned and controlled by the network node that owns this resource. This is always an even unsigned number unless an error has… |
| 1.3.6.1.4.1.2.6.2.13.3.1.3.1.1.6 | ColumnibmappnLocalTgQuiescing | read-only | mandatory | Indicates whether the Transmission Group is quiescing. |
| 1.3.6.1.4.1.2.6.2.13.3.1.3.1.1.7 | ColumnibmappnLocalTgOperational | read-only | mandatory | Indicates whether the Transmission Group is operational. |
| 1.3.6.1.4.1.2.6.2.13.3.1.3.1.1.8 | ColumnibmappnLocalTgCpCpSession | read-only | mandatory | Indicates whether the CP-CP Sessions are supported on this TG. |
| 1.3.6.1.4.1.2.6.2.13.3.1.3.1.1.9 | ColumnibmappnLocalTgEffCap | read-only | mandatory | The effective capacity is an integer value that indicates the actual kilo bits per second. It is derived from the link bandwidth and maximum load factor with t… |
| 1.3.6.1.4.1.2.6.2.13.3.1.3.1.1.10 | ColumnibmappnLocalTgConnCost | read-only | mandatory | Cost per connect time: a value representing the relative cost per unit of time to use the TG. Range is from 0, which means no cost, to 255. |
| 1.3.6.1.4.1.2.6.2.13.3.1.3.1.1.11 | ColumnibmappnLocalTgByteCost | read-only | mandatory | Relative cost of transmitting a byte over this link. Range is from 0 (lowest cost) to 255. |
| 1.3.6.1.4.1.2.6.2.13.3.1.3.1.1.12 | ColumnibmappnLocalTgSecurity | read-only | mandatory | Security level for this TG. |
| 1.3.6.1.4.1.2.6.2.13.3.1.3.1.1.13 | ColumnibmappnLocalTgDelay | read-only | mandatory | Relative amount of time that it takes for a signal to travel the length of the logical link. This time is represented in micro seconds, with some of the more c… |
| 1.3.6.1.4.1.2.6.2.13.3.1.3.1.1.14 | ColumnibmappnLocalTgModemClass | read-only | mandatory | This is used to have multiple images for a connection network. For a connection network it is the same as in the TG vector and for a non-connection network it … |
| 1.3.6.1.4.1.2.6.2.13.3.1.3.1.1.15 | ColumnibmappnLocalTgUsr1 | read-only | mandatory | Value of the first user-defined TG characteristic for this TG. Range is 0-255. |
| 1.3.6.1.4.1.2.6.2.13.3.1.3.1.1.16 | ColumnibmappnLocalTgUsr2 | read-only | mandatory | Value of the second user-defined TG characteristic for this TG. Range is 0-255. |
| 1.3.6.1.4.1.2.6.2.13.3.1.3.1.1.17 | ColumnibmappnLocalTgUsr3 | read-only | mandatory | Value of the third user-defined TG characteristic for this TG. Range is 0-255. |
| 1.3.6.1.4.1.2.6.2.13.3.2 | NodeibmappnLocalEnTopology | |||
| 1.3.6.1.4.1.2.6.2.13.3.2.1 | TableibmappnLocalEnTable | not-accessible | mandatory | Portion of the APPN topology database that describes the end nodes known to this node. |
| 1.3.6.1.4.1.2.6.2.13.3.2.1.1 | RowibmappnLocalEnEntry | not-accessible | mandatory | This table is indexed by the end node CPname. |
| 1.3.6.1.4.1.2.6.2.13.3.2.1.1.1 | ColumnibmappnLocalEnName | read-only | mandatory | Administratively-assigned fully-qualified name of end node in the format NETID.CPNAME. |
| 1.3.6.1.4.1.2.6.2.13.3.2.1.1.2 | ColumnibmappnLocalEnEntryTimeLeft | read-only | mandatory | Number of days before deletion of this end node entry. Range is 0-31. |
| 1.3.6.1.4.1.2.6.2.13.3.2.1.1.3 | ColumnibmappnLocalEnType | read-only | mandatory | Type of APPN node (must always be a len or end node). |
| 1.3.6.1.4.1.2.6.2.13.3.2.2 | TableibmappnLocalEnTgTable | not-accessible | mandatory | Table describing all of the TGs owned by the end nodes known to this node. The TG destination can be a virtual node, network node, or end node. |
| 1.3.6.1.4.1.2.6.2.13.3.2.2.1 | RowibmappnLocalEnTgEntry | not-accessible | mandatory | This table requires multiple indexes to uniquely identify each TG. They are originating CPname, destination CPname, and the TG number. |
| 1.3.6.1.4.1.2.6.2.13.3.2.2.1.1 | ColumnibmappnLocalEnTgOrigin | read-only | mandatory | Administratively-assigned name for the origination node for this TG. This is the fully-qualified network name. |
| 1.3.6.1.4.1.2.6.2.13.3.2.2.1.2 | ColumnibmappnLocalEnTgDest | read-only | mandatory | Administratively-assigned name for the destination node for this TG. This is the fully-qualified network name. |
| 1.3.6.1.4.1.2.6.2.13.3.2.2.1.3 | ColumnibmappnLocalEnTgNum | read-only | mandatory | Number associated with this transmission group. |
| 1.3.6.1.4.1.2.6.2.13.3.2.2.1.4 | ColumnibmappnLocalEnTgEntryTimeLeft | read-only | mandatory | Number of days before deletion of this end node TG entry. Range is 0-31. |
| 1.3.6.1.4.1.2.6.2.13.3.2.2.1.5 | ColumnibmappnLocalEnTgDestVirtual | read-only | mandatory | Indicates whether the destination node is a virtual node. |
| 1.3.6.1.4.1.2.6.2.13.3.2.2.1.6 | ColumnibmappnLocalEnTgDlcData | read-only | mandatory | DLC specific data related to the link connection network. Token-Ring - MAC/SAP X.25 Switched - dial digits X.21 Switched - dial digits Circuit Swtch - dial dig… |
| 1.3.6.1.4.1.2.6.2.13.3.2.2.1.7 | ColumnibmappnLocalEnTgOperational | read-only | mandatory | Indicates whether the Transmission Group is operational. |
| 1.3.6.1.4.1.2.6.2.13.3.2.2.1.8 | ColumnibmappnLocalEnTgCpCpSession | read-only | mandatory | Indicates whether CP-CP sessions are supported on this TG. |
| 1.3.6.1.4.1.2.6.2.13.3.2.2.1.9 | ColumnibmappnLocalEnTgEffCap | read-only | mandatory | The effective capacity is an integer value that indicates the actual kilo bits per second. It is derived from the link bandwidth and maximum load factor with t… |
| 1.3.6.1.4.1.2.6.2.13.3.2.2.1.10 | ColumnibmappnLocalEnTgConnCost | read-only | mandatory | Cost per connect time: a value representing the relative cost per unit of time to use the TG. Range is from 0, which means no cost, to 255. |
| 1.3.6.1.4.1.2.6.2.13.3.2.2.1.11 | ColumnibmappnLocalEnTgByteCost | read-only | mandatory | Relative cost of transmitting a byte over this link. Range is from 0, which means no cost, to 255. |
| 1.3.6.1.4.1.2.6.2.13.3.2.2.1.12 | ColumnibmappnLocalEnTgSecurity | read-only | mandatory | Security level for this TG. |
| 1.3.6.1.4.1.2.6.2.13.3.2.2.1.13 | ColumnibmappnLocalEnTgDelay | read-only | mandatory | Relative amount of time that it takes for a signal to travel the length of the logical link. This time is represented in micro seconds, with some of the more c… |
| 1.3.6.1.4.1.2.6.2.13.3.2.2.1.14 | ColumnibmappnLocalEnTgModemClass | read-only | mandatory | This is used to have multiple images for a connection network. For a connection network it is the same as in the TG vector and for a non connection network it … |
| 1.3.6.1.4.1.2.6.2.13.3.2.2.1.15 | ColumnibmappnLocalEnTgUsr1 | read-only | mandatory | First user-defined TG characteristic for this TG. Range of values is 0-255. |
| 1.3.6.1.4.1.2.6.2.13.3.2.2.1.16 | ColumnibmappnLocalEnTgUsr2 | read-only | mandatory | Second user-defined TG characteristic for this TG. Range of values is 0-255. |
| 1.3.6.1.4.1.2.6.2.13.3.2.2.1.17 | ColumnibmappnLocalEnTgUsr3 | read-only | mandatory | Third user-defined TG characteristic for this TG. Range of values is 0-255. |
| 1.3.6.1.4.1.2.6.2.13.5 | NodeibmappnDir | |||
| 1.3.6.1.4.1.2.6.2.13.5.1 | NodeibmappnDirPerf | |||
| 1.3.6.1.4.1.2.6.2.13.5.1.1 | ScalaribmappnDirMaxCaches | read-only | mandatory | Maximum number of cache entries allowed. This is an administratively assigned value. |
| 1.3.6.1.4.1.2.6.2.13.5.1.2 | ScalaribmappnDirCurCaches | read-only | mandatory | Current number of cache entries. |
| 1.3.6.1.4.1.2.6.2.13.5.1.3 | ScalaribmappnDirCurHomeEntries | read-only | mandatory | Current number of home entries. |
| 1.3.6.1.4.1.2.6.2.13.5.1.4 | ScalaribmappnDirRegEntries | read-only | mandatory | Current number of registered entries. |
| 1.3.6.1.4.1.2.6.2.13.5.1.5 | ScalaribmappnDirInLocates | read-only | mandatory | Number of directed locates received. |
| 1.3.6.1.4.1.2.6.2.13.5.1.6 | ScalaribmappnDirInBcastLocates | read-only | mandatory | Number of broadcast locates received. |
| 1.3.6.1.4.1.2.6.2.13.5.1.7 | ScalaribmappnDirOutLocates | read-only | mandatory | Number of directed locates sent. |
| 1.3.6.1.4.1.2.6.2.13.5.1.8 | ScalaribmappnDirOutBcastLocates | read-only | mandatory | Number of broadcast locates sent. |
| 1.3.6.1.4.1.2.6.2.13.5.1.9 | ScalaribmappnDirNotFoundLocates | read-only | mandatory | Number of directed locates returned with a 'not found'. |
| 1.3.6.1.4.1.2.6.2.13.5.1.10 | ScalaribmappnDirNotFoundBcastLocates | read-only | mandatory | Number of broadcast locates returned with a not found. |
| 1.3.6.1.4.1.2.6.2.13.5.1.11 | ScalaribmappnDirLocateOutstands | read-only | mandatory | Current number of outstanding locates, both directed and broadcast. This value varies. A value of zero indicates that no locates are unanswered. |
| 1.3.6.1.4.1.2.6.2.13.5.2 | TableibmappnDirTable | not-accessible | mandatory | Table containing information about all known LUs and TPs. |
| 1.3.6.1.4.1.2.6.2.13.5.2.1 | RowibmappnDirEntry | not-accessible | mandatory | This table is indexed by the LU name. |
| 1.3.6.1.4.1.2.6.2.13.5.2.1.1 | ColumnibmappnDirLuName | read-only | mandatory | Fully-qualified network LU name in the domain of the serving network node. |
| 1.3.6.1.4.1.2.6.2.13.5.2.1.2 | ColumnibmappnDirServerName | read-only | mandatory | Fully-qualified control point (CP) name of the network node server. For unassociated end node entries, the end node fully-qualified name is returned. |
| 1.3.6.1.4.1.2.6.2.13.5.2.1.3 | ColumnibmappnDirLuOwnerName | read-only | mandatory | Fully-qualified CP name of the node at which the LU is located. This name is the same as the serving NN name when the LU is located at a network node or an una… |
| 1.3.6.1.4.1.2.6.2.13.5.2.1.4 | ColumnibmappnDirLuLocation | read-only | mandatory | Specifies the location of the LU. |
| 1.3.6.1.4.1.2.6.2.13.5.2.1.5 | ColumnibmappnDirType | read-only | mandatory | Directory types are: 1 - Home The LU is in the domain of the local network node and the LU information has been configured at the local node. 2 - Cache The LU … |
| 1.3.6.1.4.1.2.6.2.13.5.2.1.6 | ColumnibmappnDirWildCard | read-only | mandatory | 1 - Other means unknown type of LU entry. 2 - Expliced-entry means the full LUNAME will be used for locating this LU. 3 - Partial-wildcard means only the non-b… |
| 1.3.6.1.4.1.2.6.2.13.6 | NodeibmappnCos | |||
| 1.3.6.1.4.1.2.6.2.13.6.1 | TableibmappnCosModeTable | not-accessible | mandatory | Table representing all of the defined mode names for this node. The table contains the matching COS name. |
| 1.3.6.1.4.1.2.6.2.13.6.1.1 | RowibmappnCosModeEntry | not-accessible | mandatory | This table is indexed by the Mode Name. |
| 1.3.6.1.4.1.2.6.2.13.6.1.1.1 | ColumnibmappnCosModeName | read-only | mandatory | Administratively-assigned name for this mode entry. |
| 1.3.6.1.4.1.2.6.2.13.6.1.1.2 | ColumnibmappnCosModeCosName | read-only | mandatory | An administratively assigned name for this Class of Service. |
| 1.3.6.1.4.1.2.6.2.13.6.2 | TableibmappnCosNameTable | not-accessible | mandatory | Table representing all of the defined class-of-service names for this node. The COS node and TG tables are accessed using the same index, which is the COS name. |
| 1.3.6.1.4.1.2.6.2.13.6.2.1 | RowibmappnCosNameEntry | not-accessible | mandatory | The COS name is the index to this table. |
| 1.3.6.1.4.1.2.6.2.13.6.2.1.1 | ColumnibmappnCosName | read-only | mandatory | Administratively-assigned name for this class of service. |
| 1.3.6.1.4.1.2.6.2.13.6.2.1.2 | ColumnibmappnCosTransPriority | read-only | mandatory | Transmission priority for this class of service. Values are: Low Medium High Network |
| 1.3.6.1.4.1.2.6.2.13.6.3 | TableibmappnCosNodeRowTable | not-accessible | mandatory | This table contains all node-row information for all class of service in this node. |
| 1.3.6.1.4.1.2.6.2.13.6.3.1 | RowibmappnCosNodeRowEntry | not-accessible | mandatory | The COS name is the first index and a integer is the second index to insure a unique index. |
| 1.3.6.1.4.1.2.6.2.13.6.3.1.1 | ColumnibmappnCosNodeRowName | read-only | mandatory | Administratively-assigned name for this class of service. |
| 1.3.6.1.4.1.2.6.2.13.6.3.1.2 | ColumnibmappnCosNodeRowIndex | read-only | mandatory | Index of COS name. This same value is used to access the node and TG COS tables. Range of values is 0-255. |
| 1.3.6.1.4.1.2.6.2.13.6.3.1.3 | ColumnibmappnCosNodeRowWgt | read-only | mandatory | Weight to be associated with the nodes that fit the criteria specified by this node row. |
| 1.3.6.1.4.1.2.6.2.13.6.3.1.4 | ColumnibmappnCosNodeRowResistMin | read-only | mandatory | Minimum route addition resistance value for this node. Range of values is 0-255. The lower the value, the more desirable the node is for intermediate routing. |
| 1.3.6.1.4.1.2.6.2.13.6.3.1.5 | ColumnibmappnCosNodeRowResistMax | read-only | mandatory | Maximum route addition resistance value for this node. Range of values is 0-255. The lower the value, the more desirable the node is for intermediate routing. |
| 1.3.6.1.4.1.2.6.2.13.6.3.1.6 | ColumnibmappnCosNodeRowMinCongestAllow | read-only | mandatory | Indicates whether low congestion will be tolerated. The minimum and maximum parameters will allow specifying either low-congested, high-congested, or either to… |
| 1.3.6.1.4.1.2.6.2.13.6.3.1.7 | ColumnibmappnCosNodeRowMaxCongestAllow | read-only | mandatory | Indicates whether high congestion will be tolerated. The minimum and maximum parameters will allow specifying either low-congested, high-congested, or either t… |
| 1.3.6.1.4.1.2.6.2.13.6.4 | TableibmappnCosTgRowTable | not-accessible | mandatory | Table containing all the Tg-row information for all class of service defined in this node. |
| 1.3.6.1.4.1.2.6.2.13.6.4.1 | RowibmappnCosTgRowEntry | not-accessible | mandatory | The TgRowName and the TgRowIndex are the index for this table. |
| 1.3.6.1.4.1.2.6.2.13.6.4.1.1 | ColumnibmappnCosTgRowName | read-only | mandatory | Administratively-assigned name for this class of service. |
| 1.3.6.1.4.1.2.6.2.13.6.4.1.2 | ColumnibmappnCosTgRowIndex | read-only | mandatory | Index of COS name. This same value is used to access the node and TG COS tables. |
| 1.3.6.1.4.1.2.6.2.13.6.4.1.3 | ColumnibmappnCosTgRowWgt | read-only | mandatory | Weight to be associated with the nodes that fit the criteria specified by this tg-row. |
| 1.3.6.1.4.1.2.6.2.13.6.4.1.4 | ColumnibmappnCosTgRowEffCapMin | read-only | mandatory | Minimum acceptable speed for this Class of Service. The effective capacity is an integer value that indicates the actual kilo bits per second. It is derived fr… |
| 1.3.6.1.4.1.2.6.2.13.6.4.1.5 | ColumnibmappnCosTgRowEffCapMax | read-only | mandatory | Maximum acceptable speed for this Class of Service. The effective capacity is an integer value that indicates the actual kilo bits per second. It is derived fr… |
| 1.3.6.1.4.1.2.6.2.13.6.4.1.6 | ColumnibmappnCosTgRowConnCostMin | read-only | mandatory | Minimum acceptable cost per connect time for this Class of Service. Cost per connect time: a value representing the relative cost per unit of time to use the T… |
| 1.3.6.1.4.1.2.6.2.13.6.4.1.7 | ColumnibmappnCosTgRowConnCostMax | read-only | mandatory | Maximum acceptable cost per connect time for this Class of Service. Cost per connect time: a value representing the relative cost per unit of time to use the T… |
| 1.3.6.1.4.1.2.6.2.13.6.4.1.8 | ColumnibmappnCosTgRowByteCostMin | read-only | mandatory | Minimum acceptable cost per byte for this Class of Service. |
| 1.3.6.1.4.1.2.6.2.13.6.4.1.9 | ColumnibmappnCosTgRowByteCostMax | read-only | mandatory | Maximum acceptable cost per byte for this Class of Service. |
| 1.3.6.1.4.1.2.6.2.13.6.4.1.10 | ColumnibmappnCosTgRowSecurityMin | read-only | mandatory | Minimum acceptable security for this Class of Service. |
| 1.3.6.1.4.1.2.6.2.13.6.4.1.11 | ColumnibmappnCosTgRowSecurityMax | read-only | mandatory | Maximum acceptable security for this Class of Service. |
| 1.3.6.1.4.1.2.6.2.13.6.4.1.12 | ColumnibmappnCosTgRowDelayMin | read-only | mandatory | Minimum acceptable propagation delay for this class of service. Relative amount of time that it takes for a signal to travel the length of the logical link. Th… |
| 1.3.6.1.4.1.2.6.2.13.6.4.1.13 | ColumnibmappnCosTgRowDelayMax | read-only | mandatory | Maximum acceptable propagation delay for this class of service. Relative amount of time that it takes for a signal to travel the length of the logical link. Th… |
| 1.3.6.1.4.1.2.6.2.13.6.4.1.14 | ColumnibmappnCosTgRowUsr1Min | read-only | mandatory | Minimum acceptable value for this user defined characteristic. Range of values is 0-255. |
| 1.3.6.1.4.1.2.6.2.13.6.4.1.15 | ColumnibmappnCosTgRowUsr1Max | read-only | mandatory | Maximum acceptable value for this user defined characteristic. Range of values is 0-255. |
| 1.3.6.1.4.1.2.6.2.13.6.4.1.16 | ColumnibmappnCosTgRowUsr2Min | read-only | mandatory | Minimum acceptable value for this user defined characteristic. Range of values is 0-255. |
| 1.3.6.1.4.1.2.6.2.13.6.4.1.17 | ColumnibmappnCosTgRowUsr2Max | read-only | mandatory | A Maximum acceptable value for this user defined characteristic. |
| 1.3.6.1.4.1.2.6.2.13.6.4.1.18 | ColumnibmappnCosTgRowUsr3Min | read-only | mandatory | Minimum acceptable value for this user defined characteristic. Range of values is 0-255. |
| 1.3.6.1.4.1.2.6.2.13.6.4.1.19 | ColumnibmappnCosTgRowUsr3Max | read-only | mandatory | Maximum acceptable value for this user defined characteristic. Range of values is 0-255. |