IBM-AIX-MIB
325 objects
This MIB module defines AIX system management objects, which model devices (printer/plotter, tape, hard disk, memory, SCSI adapter, CDROM drive) physical and logical storage (volume group, physical volume, logical volume, and paging space), print spooling (printing queue), users/groups, agent action, file systems, processes, subsystem services (subsystem, subserver), login users, system environment, events.
Imported Objects
| RFC1213-MIB | DisplayString |
| SNMPv2-CONF | MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-SMI | enterprises Integer32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE TimeTicks |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2 | Nodeibm | |||
| 1.3.6.1.4.1.2.6 | NodeibmProd | |||
| 1.3.6.1.4.1.2.6.191 | IdentityibmAIX | This MIB module defines AIX system management objects, which model devices (printer/plotter, tape, hard disk, memory, SCSI adapter, CDROM drive) physical and l… | ||
| 1.3.6.1.4.1.2.6.191.1 | NodeaixSystem | |||
| 1.3.6.1.4.1.2.6.191.1.1 | NodeaixAgent | |||
| 1.3.6.1.4.1.2.6.191.1.1.1 | ScalaraixAgentAction | read-write | current | This variable is used to trigger an action on the agent itself . 5 (running) is the normal state. When set, this variable triggers the agent to do the followin… |
| 1.3.6.1.4.1.2.6.191.1.1.2 | ScalaraixAgentCmdString | read-write | current | This string represents a runnable command on AIX with its parameters. Once the command string is set, the system can trigger the execution of the command by se… |
| 1.3.6.1.4.1.2.6.191.1.1.3 | ScalaraixAgentExeCommand | read-write | current | The variable is used to trigger the execution of the command in seCommandString. The result is stored by seCmdResult, and the output is stored by aixAgentCmdOu… |
| 1.3.6.1.4.1.2.6.191.1.1.4 | ScalaraixAgentCmdResult | read-only | current | This object stores the output result of executing the command stored by aixAgentCmdString. |
| 1.3.6.1.4.1.2.6.191.1.1.5 | ScalaraixAgentPollInterval | read-write | current | The poll interval(in seconds) used by the agent. The default value is zero. This value is used to define the minimum time interval during which the subagent mu… |
| 1.3.6.1.4.1.2.6.191.1.1.6 | ScalaraixPollEnable | read-write | current | Enables or disables polling. It may change the following polling interval variables: aixAgentPollInterval aixFsPollInterval aixCPUPollInterval aixVgPollInterva… |
| 1.3.6.1.4.1.2.6.191.1.1.7 | ScalaraixLastTrapMsg | read-only | current | This object holds the most recent trap message sent from the subagent. Its default value is set to NULL. |
| 1.3.6.1.4.1.2.6.191.1.1.8 | TableaixAgentCmdOutTable | not-accessible | current | The output from the execution of the command stored in aixAgentCmdString |
| 1.3.6.1.4.1.2.6.191.1.1.8.1 | RowaixAgentCmdOutTableEntry | not-accessible | current | An entry of the agent command output table |
| 1.3.6.1.4.1.2.6.191.1.1.8.1.1 | ColumnaixAgentCmdOutput | read-only | current | After the command stored in aixAgentCmdString is run, each line of the output is stored in one entry of this table. |
| 1.3.6.1.4.1.2.6.191.1.1.8.1.2 | ColumnaixAgentCmdOutIndex | read-only | current | Index of the table. |
| 1.3.6.1.4.1.2.6.191.1.1.9 | ScalaraixFsPollInterval | read-write | current | The polling interval for file systems. This variable works together with the general polling interval aixAgentPollInterval. Its default value is zero. 1) If ai… |
| 1.3.6.1.4.1.2.6.191.1.1.10 | ScalaraixCPUPollInterval | read-write | current | The polling interval for CPU utilization. This variable works together with the general polling interval aixAgentPollInterval. Its default value is zero. 1) If… |
| 1.3.6.1.4.1.2.6.191.1.1.11 | ScalaraixVgPollInterval | read-write | current | The polling interval for volume groups. This variable works together with the general polling interval aixAgentPollInterval. Its default value is zero. 1) If a… |
| 1.3.6.1.4.1.2.6.191.1.1.12 | ScalaraixPagePollInterval | read-write | current | The polling interval for paging spaces. This variable works together with the general polling interval aixAgentPollInterval. Its default value is zero. 1) If a… |
| 1.3.6.1.4.1.2.6.191.1.1.13 | ScalaraixLFPollInterval | read-write | current | The polling interval for login failure. This variable works together with the general polling interval aixAgentPollInterval. Its default value is zero. 1) If a… |
| 1.3.6.1.4.1.2.6.191.1.2 | NodeaixSystemEnvironment | |||
| 1.3.6.1.4.1.2.6.191.1.2.1 | ScalaraixSeCPUUtilization | read-only | current | It is an aggregate view for utilization of multiple CPUs. aixSeCPUUtilization equals the sum of each CPU kernel time percentage and user time percentage divide… |
| 1.3.6.1.4.1.2.6.191.1.2.2 | ScalaraixSeCPUThreshold | read-write | current | Threshold for the CPU utilization. When it is set to zero, the trap is disabled. The default value is 95 which means a trap would be generated if the aggregate… |
| 1.3.6.1.4.1.2.6.191.1.2.3 | ScalaraixSeSystemRunLevel | read-write | current | Tells the init command to set the run level on next system boot. |
| 1.3.6.1.4.1.2.6.191.1.2.4 | ScalaraixSeSystemState | read-write | current | The object is used to shutdown or reboot the system to the run level set by aixSeSystemRunLevel. running(1) - the system is running reboot(2) - when the value … |
| 1.3.6.1.4.1.2.6.191.1.2.5 | ScalaraixSeSystemTrap | read-write | current | Enable or disable the aixUtilizationCPU trap in the system environment group. The default value is enable(1). |
| 1.3.6.1.4.1.2.6.191.1.3 | NodeaixAuxSystemEnvironment | |||
| 1.3.6.1.4.1.2.6.191.1.3.1 | ScalaraixSeDateAndTime | read-only | current | The system date and time. |
| 1.3.6.1.4.1.2.6.191.1.3.2 | ScalaraixSeMaxProcPerUser | read-write | current | The number of processes each user can use at one time. This limit does not apply to a root user. The default number is 128. Increasing or decreasing this numbe… |
| 1.3.6.1.4.1.2.6.191.1.3.3 | ScalaraixSeLicenseNum | read-write | current | Specifies the maximum number of fixed licenses on the system. Valid values for this option are positive integers from 1 to 32767. When this object is set, its … |
| 1.3.6.1.4.1.2.6.191.1.3.4 | ScalaraixSeRemainingLicenseNum | read-only | current | Specifies the remaining number of fixed licenses on the system. Valid values for the is option are positive integers from 1 to 32767. |
| 1.3.6.1.4.1.2.6.191.1.3.5 | ScalaraixSeNumCPUs | read-only | current | The number of CPUs on the machine. |
| 1.3.6.1.4.1.2.6.191.1.3.6 | ScalaraixSeMachineType | read-only | current | The machine type. For example: IBM,7043-150 |
| 1.3.6.1.4.1.2.6.191.1.3.7 | ScalaraixSeSerialNumber | read-only | current | The serial number of the machine. |
| 1.3.6.1.4.1.2.6.191.1.4 | NodeaixTrap | |||
| 1.3.6.1.4.1.2.6.191.1.4.1 | NotificationaixFileSystemMounted | current | When a file system is mounted or unmounted through SNMP, an event is generated. aixFsName is defined in aixFsTable. | |
| 1.3.6.1.4.1.2.6.191.1.4.2 | NotificationaixFileSystemFull | current | When the current sampled used percentage of a file system is above aixFsThreshold and the value at last interval is less than the aixFsThreshold, an the event … | |
| 1.3.6.1.4.1.2.6.191.1.4.3 | NotificationaixVolumeGroupFull | current | When the current sampled used percentage of a volume group is above aixVgThreshold and the value at the last interval is less than the aixVgThreshold, an event… | |
| 1.3.6.1.4.1.2.6.191.1.4.4 | NotificationaixPageFull | current | When the current used percentage of a paging space is above aixPageThreshold and the value at the last interval is less than the aixPageThreshold, an event wil… | |
| 1.3.6.1.4.1.2.6.191.1.4.5 | NotificationaixUserLoginFailed | current | If a user fails to log into the system in the number of attempts defined by aixLoginFailedThreshold in the last time period defined by aixFailedLoginTimePeriod… | |
| 1.3.6.1.4.1.2.6.191.1.4.6 | NotificationaixUtilizationCPU | current | When the CPU utilization reaches the threshold, an event is generated. The event contains the utilization, and threshold values. aixSeCPUUtilization - CPU Util… | |
| 1.3.6.1.4.1.2.6.191.1.6 | NodeaixGeneralTrap | |||
| 1.3.6.1.4.1.2.6.191.1.6.1 | NotificationaixSnmptrapHolder | current | Together with the agent, the snmptrap command is delivered. The snmptrap command sends a trap message to the agent. This object is place holder for snmptrap co… | |
| 1.3.6.1.4.1.2.6.191.2 | NodeaixStorageSystem | |||
| 1.3.6.1.4.1.2.6.191.2.1 | NodeaixVolumeGroup | |||
| 1.3.6.1.4.1.2.6.191.2.1.1 | ScalaraixVgThreshold | read-write | current | The percentage threshold for the volume group. When the current used percentage for the volume group is above aixVgThreshold and the value of the last poll int… |
| 1.3.6.1.4.1.2.6.191.2.1.2 | TableaixVgTable | not-accessible | current | A table of defined volume groups. The number of entries depends on the configuration of the system. On AIX, a volume group is a collection of 1 to 32 physical … |
| 1.3.6.1.4.1.2.6.191.2.1.2.1 | RowaixVgEntry | not-accessible | current | An entry of vgTable. Each entry contains all the attributes of each volume group. |
| 1.3.6.1.4.1.2.6.191.2.1.2.1.1 | ColumnaixVgName | read-only | current | The name of a volume group. The name must be system-wide unique and can range from 1 to 15 characters |
| 1.3.6.1.4.1.2.6.191.2.1.2.1.2 | ColumnaixVgIdentifier | read-only | current | It is a series of numbers(e.g. 0038455182a7b5f6) to identify the volume group. |
| 1.3.6.1.4.1.2.6.191.2.1.2.1.3 | ColumnaixVgState | read-only | current | State of the volume group. If the volume group is activated with the varyonvg command, the state is either active/complete (indicating all physical volumes are… |
| 1.3.6.1.4.1.2.6.191.2.1.2.1.4 | ColumnaixVgSize | read-only | current | The total size of the volume group in megabytes. |
| 1.3.6.1.4.1.2.6.191.2.1.2.1.5 | ColumnaixVgFree | read-only | current | The available size of the volume group in megabytes. |
| 1.3.6.1.4.1.2.6.191.2.1.2.1.6 | ColumnaixVgCurNumLVs | read-only | current | The number of logical volumes currently in the volume group. |
| 1.3.6.1.4.1.2.6.191.2.1.2.1.7 | ColumnaixVgOpenLVs | read-only | current | Number of logical volumes within the volume group that are currently open. |
| 1.3.6.1.4.1.2.6.191.2.1.2.1.8 | ColumnaixVgActivePVs | read-only | current | The number of active physical voulmes currently in the volume group. |
| 1.3.6.1.4.1.2.6.191.2.1.2.1.9 | ColumnaixVgIndex | read-only | current | The columnar index for the vgTable. |
| 1.3.6.1.4.1.2.6.191.2.2 | NodeaixLogicalVolume | |||
| 1.3.6.1.4.1.2.6.191.2.2.1 | TableaixLvTable | not-accessible | current | A logical volume is a collection of logical partitions made up of physical partitions, all contained in a single volume group. Logical volumes are expandable a… |
| 1.3.6.1.4.1.2.6.191.2.2.1.1 | RowaixLvEntry | not-accessible | current | An entry of lvTable |
| 1.3.6.1.4.1.2.6.191.2.2.1.1.1 | ColumnaixLvName | read-only | current | Logical volume names must be system-wide unique and can range from 1 to 15 characters. |
| 1.3.6.1.4.1.2.6.191.2.2.1.1.2 | ColumnaixLvNameVG | read-only | current | Name of the volume group the logical volume belongs to. Volume group names must be unique system wide and can range from 1 to 15 characters. |
| 1.3.6.1.4.1.2.6.191.2.2.1.1.3 | ColumnaixLvType | read-write | current | Logical volume type. The type may be boot, jfslog, jfs, and paging. |
| 1.3.6.1.4.1.2.6.191.2.2.1.1.4 | ColumnaixLvMountPoint | read-only | current | File system mount point for the logical volume, if applicable. |
| 1.3.6.1.4.1.2.6.191.2.2.1.1.5 | ColumnaixLvSize | read-only | current | The size of the logical volume in PPS. |
| 1.3.6.1.4.1.2.6.191.2.2.1.1.6 | ColumnaixLvState | read-only | current | The status of the logical volume. It may be open/syncd, open/stale, close/syncd, close/stale or undefined. |
| 1.3.6.1.4.1.2.6.191.2.2.1.1.7 | ColumnaixLvIndex | read-only | current | The columnar index for the lvTable. |
| 1.3.6.1.4.1.2.6.191.2.3 | NodeaixPhysicalVolume | |||
| 1.3.6.1.4.1.2.6.191.2.3.1 | TableaixPvTable | not-accessible | current | A physical volume is a read-write disk physically attached to a computer, with a permanently assigned system wide unique identifier. They are added to a volume… |
| 1.3.6.1.4.1.2.6.191.2.3.1.1 | RowaixPvEntry | not-accessible | current | An entry of pvTable |
| 1.3.6.1.4.1.2.6.191.2.3.1.1.1 | ColumnaixPvName | read-only | current | The name of the physical volume. Physical volume names are typically in the form hdiskx where x is a system wide unique number. This name is assigned when the … |
| 1.3.6.1.4.1.2.6.191.2.3.1.1.2 | ColumnaixPvNameVG | read-only | current | The volume group which is assigned to the physical volume. |
| 1.3.6.1.4.1.2.6.191.2.3.1.1.3 | ColumnaixPvState | read-only | current | State of the physical volume. If the volume group that contains the physical volume is varied on with the varyonvg command, the state is active , missing , or … |
| 1.3.6.1.4.1.2.6.191.2.3.1.1.4 | ColumnaixPvSize | read-only | current | Total size of the physical volume in megabytes. |
| 1.3.6.1.4.1.2.6.191.2.3.1.1.5 | ColumnaixPvFree | read-only | current | Available size of the physical volume in megabytes |
| 1.3.6.1.4.1.2.6.191.2.3.1.1.6 | ColumnaixPvNumLVs | read-only | current | Number of logical volumes using the physical volume. |
| 1.3.6.1.4.1.2.6.191.2.3.1.1.7 | ColumnaixPvIndex | read-only | current | The columnar index for the pvTable. |
| 1.3.6.1.4.1.2.6.191.2.4 | NodeaixPagingSpace | |||
| 1.3.6.1.4.1.2.6.191.2.4.1 | ScalaraixPageThreshold | read-write | current | The percentage used threshold for the paging space. When the current used percentage for the page space is above aixVgThreshold and the value of the last poll … |
| 1.3.6.1.4.1.2.6.191.2.4.2 | TableaixPageTable | not-accessible | current | A paging space is fixed-disk storage for information that is resident in virtual memory, but is not currently being accessed. When the amount of free real memo… |
| 1.3.6.1.4.1.2.6.191.2.4.2.1 | RowaixPageEntry | not-accessible | current | An entry of the pageTable Table |
| 1.3.6.1.4.1.2.6.191.2.4.2.1.1 | ColumnaixPageName | read-only | current | The name of the paging space. It is assigned by the system automatically when it is created. |
| 1.3.6.1.4.1.2.6.191.2.4.2.1.2 | ColumnaixPageNameVG | read-only | current | Specifies the volume group within which the logical volume for the paging space is created. |
| 1.3.6.1.4.1.2.6.191.2.4.2.1.3 | ColumnaixPageNamePV | read-only | current | Specifies the physical volume of the volume group. |
| 1.3.6.1.4.1.2.6.191.2.4.2.1.4 | ColumnaixPageSize | read-only | current | The size of the paging space. |
| 1.3.6.1.4.1.2.6.191.2.4.2.1.5 | ColumnaixPagePercentUsed | read-only | current | The used percentage of the paging space. |
| 1.3.6.1.4.1.2.6.191.2.4.2.1.6 | ColumnaixPageStatus | read-only | current | Status of the paging space. |
| 1.3.6.1.4.1.2.6.191.2.4.2.1.7 | ColumnaixPageType | read-only | current | The type of paging space. |
| 1.3.6.1.4.1.2.6.191.2.4.2.1.8 | ColumnaixPageIndex | read-only | current | The columnar index for the pageTable. |
| 1.3.6.1.4.1.2.6.191.3 | NodeaixPrintSystem | |||
| 1.3.6.1.4.1.2.6.191.3.1 | NodeaixPrtQueue | |||
| 1.3.6.1.4.1.2.6.191.3.1.1 | TableaixPrtQueTable | not-accessible | current | The print queue table. If several devices are attached to one queue, there are several entries whose keys are queue name and device name. |
| 1.3.6.1.4.1.2.6.191.3.1.1.1 | RowaixPrtQueEntry | not-accessible | current | An entry for a queue in the print queue table. |
| 1.3.6.1.4.1.2.6.191.3.1.1.1.1 | ColumnaixPrtQueName | read-only | current | The name of the queue . |
| 1.3.6.1.4.1.2.6.191.3.1.1.1.2 | ColumnaixPrtQueDevice | read-only | current | Print Queue device |
| 1.3.6.1.4.1.2.6.191.3.1.1.1.3 | ColumnaixPrtQueStatus | read-only | current | ready(1) indicates that virtual device is up. running(2) indicates that virtual device is running a job. waiting(3) indicates that virtual device is could not … |
| 1.3.6.1.4.1.2.6.191.3.1.1.1.4 | ColumnaixPrtQueAction | read-write | current | A control variable used to trigger an action on a queue in the printer table. When read, this variable always returns the most recent value that it was previou… |
| 1.3.6.1.4.1.2.6.191.3.1.1.1.5 | ColumnaixPrtQueDescipline | read-only | current | Specifies the order of print jobs in the queue. For example, the discipline may be first come first servei(fcfs) or shrtest job next (sjn). The selected queuin… |
| 1.3.6.1.4.1.2.6.191.3.1.1.1.6 | ColumnaixPrtQueAcctFile | read-only | current | Specify the full path name of an existing file where accounting data for this print queue can be logged. If account is not wanted, it is set to FALSE. |
| 1.3.6.1.4.1.2.6.191.3.1.1.1.7 | ColumnaixPrtQueHost | read-only | current | Specifies the full path name of an existing file where accounting data for this print queue can be logged. If accounting is not wanted, FALSE is specified. |
| 1.3.6.1.4.1.2.6.191.3.1.1.1.8 | ColumnaixPrtQueRQ | read-only | current | Specifies the remote queue name. If the queue is defined on the local host, NULL string value will be assigned. |
| 1.3.6.1.4.1.2.6.191.3.1.1.1.9 | ColumnaixPrtQueJobNum | read-only | current | the job number of currently running job in the queue. If the queue is down, the job number of the currently running job will be zero. |
| 1.3.6.1.4.1.2.6.191.3.1.1.1.10 | ColumnaixPrtQueIndex | read-only | current | The columnar index for the aixPrtQueTable. |
| 1.3.6.1.4.1.2.6.191.4 | NodeaixUser | |||
| 1.3.6.1.4.1.2.6.191.4.1 | NodeaixUsers | |||
| 1.3.6.1.4.1.2.6.191.4.1.1 | TableaixUsrTable | not-accessible | current | List of users. |
| 1.3.6.1.4.1.2.6.191.4.1.1.1 | RowaixUsrEntry | not-accessible | current | An entry in the users table. |
| 1.3.6.1.4.1.2.6.191.4.1.1.1.1 | ColumnaixUsrName | read-only | current | Specifies a string that identifies this user account on the system. A user name contains a string of one to eight bytes. They can be letters, numbers, and some… |
| 1.3.6.1.4.1.2.6.191.4.1.1.1.2 | ColumnaixUsrID | read-write | current | Defines a unique decimal integer string to associate with this user account on the system. It is strongly recommended to let the system generate the user to in… |
| 1.3.6.1.4.1.2.6.191.4.1.1.1.3 | ColumnaixUsrHome | read-write | current | The user home directory. |
| 1.3.6.1.4.1.2.6.191.4.1.1.1.4 | ColumnaixUsrShell | read-write | current | The user's initial shell. On AIX, it is also called initial program. |
| 1.3.6.1.4.1.2.6.191.4.1.1.1.5 | ColumnaixUsrLocalLogin | read-write | current | Indicates whether the user can log into the system with the login command locally. default value is true(1) |
| 1.3.6.1.4.1.2.6.191.4.1.1.1.6 | ColumnaixUsrRemoteLogin | read-write | current | Indicates whether the user can log into the system with the login command. For example, if this is set to false, the user can not login with the telnet remotel… |
| 1.3.6.1.4.1.2.6.191.4.1.1.1.7 | ColumnaixUsrPasswdMaxAge | read-write | current | Defines the maximum age (in weeks) for the user's password. When the password reaches this age, the system requires it to be changed before the user can login … |
| 1.3.6.1.4.1.2.6.191.4.1.1.1.8 | ColumnaixUsrStatus | read-write | current | The user status. Determines the status of the user. Changing this variable will affect the user. 'locked(2)' is synonymous with 'disabled(3)', and unlocked(1) … |
| 1.3.6.1.4.1.2.6.191.4.1.1.1.9 | ColumnaixUsrGroups | read-only | current | Lists the groups to which the user belongs seperated by the \',\' delimiter. The first on group on the list is the primary group. Groups are collections of use… |
| 1.3.6.1.4.1.2.6.191.4.1.1.1.10 | ColumnaixUsrAllowableAttempts | read-write | current | Number of failed logins times before the user account is locked. Default value is 0. Zero or negative value indicates no limit exists. |
| 1.3.6.1.4.1.2.6.191.4.1.1.1.11 | ColumnaixUsrResetLoginCount | read-write | current | After the number of unsuccessful login attempts defined by aixUsrAllowableAttempts, the user will not be able to log in until the user's unsuccessful_login_cou… |
| 1.3.6.1.4.1.2.6.191.4.1.1.1.12 | ColumnaixUsrPrimaryGroup | read-write | current | The primary group that the user belongs to . |
| 1.3.6.1.4.1.2.6.191.4.1.1.1.13 | ColumnaixUsrIndex | read-only | current | The index of the user table . |
| 1.3.6.1.4.1.2.6.191.4.2 | NodeaixGroups | |||
| 1.3.6.1.4.1.2.6.191.4.2.1 | TableaixGrpTable | not-accessible | current | List of groups. |
| 1.3.6.1.4.1.2.6.191.4.2.1.1 | RowaixGrpEntry | not-accessible | current | An entry in the group table. |
| 1.3.6.1.4.1.2.6.191.4.2.1.1.1 | ColumnaixGrpIndex | read-only | current | The index of the group table. |
| 1.3.6.1.4.1.2.6.191.4.2.1.1.2 | ColumnaixGrpName | read-only | current | Specifies the string that identifies a collection of system users that can access and work with protected resources. The system uses groups to control access t… |
| 1.3.6.1.4.1.2.6.191.4.2.1.1.3 | ColumnaixGrpID | read-only | current | The system assigns a unique ID associated to the group name. The group IDs are stored in the /etc/group file. |
| 1.3.6.1.4.1.2.6.191.4.2.1.1.4 | ColumnaixGrpAdminGroup | read-only | current | Indicates if the group is an administrative group. Only the root user can modify the attributes of an administrative group. This field is displayed with False … |
| 1.3.6.1.4.1.2.6.191.4.2.1.1.5 | ColumnaixGrpUsrList | read-only | current | the users who are in this group. |
| 1.3.6.1.4.1.2.6.191.4.2.1.1.6 | ColumnaixGrpAdmList | read-only | current | The administrator list for this group . |
| 1.3.6.1.4.1.2.6.191.5 | NodeaixService | |||
| 1.3.6.1.4.1.2.6.191.5.1 | NodeaixSrvSubsystem | |||
| 1.3.6.1.4.1.2.6.191.5.1.1 | ScalaraixSubSystemNum | read-only | current | The number of the subsystems in the current table. |
| 1.3.6.1.4.1.2.6.191.5.1.2 | TableaixSubSysTable | not-accessible | current | A table of subsystems. |
| 1.3.6.1.4.1.2.6.191.5.1.2.1 | RowaixSubSysEntry | not-accessible | current | An entry in the subsystem table |
| 1.3.6.1.4.1.2.6.191.5.1.2.1.1 | ColumnaixSubSysName | read-only | current | The name of the subsystem. |
| 1.3.6.1.4.1.2.6.191.5.1.2.1.2 | ColumnaixSubSysGroup | read-only | current | A subsystem group is a group of any specified subsystems. Grouping subsystems together allows control over several subsystems at the same time. Examples of sub… |
| 1.3.6.1.4.1.2.6.191.5.1.2.1.3 | ColumnaixSubSysPID | read-only | current | The process ID of the subsystem. When the subsystem is inoperative, the PID is zero. |
| 1.3.6.1.4.1.2.6.191.5.1.2.1.4 | ColumnaixSubSysStatus | read-write | current | The status of the subsystem. When it is active(1), it can be stopped by setting the status to 2. Or when it is inoperative(2), it can be started by setting the… |
| 1.3.6.1.4.1.2.6.191.5.1.2.1.5 | ColumnaixSubSysIndex | read-only | current | The index of the subsystem table. |
| 1.3.6.1.4.1.2.6.191.5.2 | NodeaixSrvSubserver | |||
| 1.3.6.1.4.1.2.6.191.5.2.1 | ScalaraixSubSrvNum | read-only | current | The number of subservers |
| 1.3.6.1.4.1.2.6.191.5.2.2 | TableaixSubSrvTable | not-accessible | current | A table of subservers. A subserver is a program or process that belongs to a subsystem. A subsystem can have multiple subservers and is responsible for startin… |
| 1.3.6.1.4.1.2.6.191.5.2.2.1 | RowaixSubSrvEntry | not-accessible | current | An entry in the subserver table. |
| 1.3.6.1.4.1.2.6.191.5.2.2.1.1 | ColumnaixSubSrvName | read-only | current | the subserver name. |
| 1.3.6.1.4.1.2.6.191.5.2.2.1.2 | ColumnaixSubSrvDescr | read-only | current | The description of the subserver. |
| 1.3.6.1.4.1.2.6.191.5.2.2.1.3 | ColumnaixSubSrvCommand | read-only | current | The command to start the subserver. |
| 1.3.6.1.4.1.2.6.191.5.2.2.1.4 | ColumnaixSubSrvStatus | read-only | current | The status of the subserver. |
| 1.3.6.1.4.1.2.6.191.5.2.2.1.5 | ColumnaixSubSrvSubsys | read-only | current | the subsystem name which the subserver belongs to. |
| 1.3.6.1.4.1.2.6.191.5.2.2.1.6 | ColumnaixSubSrvIndex | read-only | current | The index of the subserver table. |
| 1.3.6.1.4.1.2.6.191.6 | NodeaixFileSystem | |||
| 1.3.6.1.4.1.2.6.191.6.1 | ScalaraixFsThreshold | read-write | current | The percentage threshold for the file system. When the current used percentage for the file system is above aixVgThreshold and the value of the last poll inter… |
| 1.3.6.1.4.1.2.6.191.6.2 | TableaixFsTable | not-accessible | current | The file system table. This table will be refreshed at least with each poll interval. |
| 1.3.6.1.4.1.2.6.191.6.2.1 | RowaixFsTableEntry | not-accessible | current | An entry of the file system table |
| 1.3.6.1.4.1.2.6.191.6.2.1.1 | ColumnaixFsIndex | read-only | current | The index of the file system table. |
| 1.3.6.1.4.1.2.6.191.6.2.1.2 | ColumnaixFsName | read-only | current | The name of the file system. |
| 1.3.6.1.4.1.2.6.191.6.2.1.3 | ColumnaixFsMountPoint | read-only | current | Specifies the mount point, which is the directory where the file system is available or will be made available. |
| 1.3.6.1.4.1.2.6.191.6.2.1.4 | ColumnaixFsType | read-only | current | The file system type. The type may be JFS(Journal File System), JFS2 (extented JFS), AFS, DFS, cashefs, autofs, procfs, cdrfs (CDROM file system), NFS(Network … |
| 1.3.6.1.4.1.2.6.191.6.2.1.5 | ColumnaixFsSize | read-write | current | The size for this file system in megabytes. |
| 1.3.6.1.4.1.2.6.191.6.2.1.6 | ColumnaixFsFree | read-only | current | Total number of megabytes free in file system. |
| 1.3.6.1.4.1.2.6.191.6.2.1.7 | ColumnaixFsNumINodes | read-only | current | Total number of i-nodes on this file system. |
| 1.3.6.1.4.1.2.6.191.6.2.1.8 | ColumnaixFsUsedInodes | read-only | current | The used number of Inodes in the file system. |
| 1.3.6.1.4.1.2.6.191.6.2.1.9 | ColumnaixFsStatus | read-only | current | The status of the file system. It is either mounted(1) or unmounted(2). |
| 1.3.6.1.4.1.2.6.191.6.2.1.10 | ColumnaixFsExecution | read-write | current | The variable is used to trigger the mount action on unmounted file system and unmount action on mounted file system. This state can only change from mount to u… |
| 1.3.6.1.4.1.2.6.191.6.2.1.11 | ColumnaixFsResultMsg | read-only | current | The execution result message of mounting or umounting command. |
| 1.3.6.1.4.1.2.6.191.7 | NodeaixProcess | |||
| 1.3.6.1.4.1.2.6.191.7.1 | ScalaraixProcNum | read-only | current | The number of processes running. |
| 1.3.6.1.4.1.2.6.191.7.2 | TableaixProcTable | not-accessible | current | The Process Table. |
| 1.3.6.1.4.1.2.6.191.7.2.1 | RowaixProcEntry | not-accessible | current | Each entry contains information about a process running on the system. |
| 1.3.6.1.4.1.2.6.191.7.2.1.1 | ColumnaixProcPID | read-only | current | The process ID (pid) of the process. |
| 1.3.6.1.4.1.2.6.191.7.2.1.2 | ColumnaixProcUID | read-only | current | The user ID of the process owner. |
| 1.3.6.1.4.1.2.6.191.7.2.1.3 | ColumnaixProcPPID | read-only | current | The process ID of the parent process. |
| 1.3.6.1.4.1.2.6.191.7.2.1.4 | ColumnaixProcGroup | read-only | current | Indicates the effective group ID of the process. |
| 1.3.6.1.4.1.2.6.191.7.2.1.5 | ColumnaixProcPriority | read-only | current | The priority of the process or kernel thread, higher numbers mean lower priority. |
| 1.3.6.1.4.1.2.6.191.7.2.1.6 | ColumnaixProcCMD | read-only | current | The command name of the process. |
| 1.3.6.1.4.1.2.6.191.7.2.1.7 | ColumnaixProcCPU | read-only | current | CPU utilization of process or thread, incremented each time the system clock ticks and the process or thread is found to be running. Large values indicate a CP… |
| 1.3.6.1.4.1.2.6.191.7.2.1.8 | ColumnaixProcStart | read-only | current | The start time of the process. |
| 1.3.6.1.4.1.2.6.191.7.2.1.9 | ColumnaixProcStatus | read-only | current | For processes: (1)O Nonexistent (2)A Active (3)W Swapped (4)I Idle (waiting for startup) : (5)Z Canceled (6)T Stopped |
| 1.3.6.1.4.1.2.6.191.7.2.1.10 | ColumnaixProcTTY | read-only | current | Indicates the controlling terminal name of the process. |
| 1.3.6.1.4.1.2.6.191.8 | NodeaixLogin | |||
| 1.3.6.1.4.1.2.6.191.8.1 | ScalaraixFailedLoginTimePeriod | read-write | current | The time period where failed login attempts are recorded to compare against aixLoginFailedThreshold. The default is 300 seconds (5 minutes). |
| 1.3.6.1.4.1.2.6.191.8.2 | ScalaraixLoginFailedThreshold | read-write | current | Defines the number of attempts which a user can try to log onto the system in the time period defined by failedLoginTimePeriod prior to the current time before… |
| 1.3.6.1.4.1.2.6.191.8.3 | TableaixLoginUserTable | not-accessible | current | loginUserTable contains users who are logged in currently. |
| 1.3.6.1.4.1.2.6.191.8.3.1 | RowaixLoginUserEntry | not-accessible | current | An entry of loginUserTable |
| 1.3.6.1.4.1.2.6.191.8.3.1.1 | ColumnaixLoginUserName | read-only | current | The user name. If the user name is unknown, its value is UNKNOWN_U. |
| 1.3.6.1.4.1.2.6.191.8.3.1.2 | ColumnaixLoginUserTTY | read-only | current | The terminal tty name. |
| 1.3.6.1.4.1.2.6.191.8.3.1.3 | ColumnaixLoginUserHost | read-only | current | The IP address of the machine the user tried to log onto the system from. |
| 1.3.6.1.4.1.2.6.191.8.3.1.4 | ColumnaixLoginUserDateAndTime | read-only | current | The date and time when the user logged in. |
| 1.3.6.1.4.1.2.6.191.8.3.1.5 | ColumnaixLoginUserIndex | read-only | current | Index for the table |
| 1.3.6.1.4.1.2.6.191.9 | NodeaixDevice | |||
| 1.3.6.1.4.1.2.6.191.9.1 | NodeaixPrinter | |||
| 1.3.6.1.4.1.2.6.191.9.1.1 | TableaixPrinterTable | not-accessible | current | A table of defined printers/plotters. On AIX, the printer is defined, used and dealt with in the same way as the plotter. The number of entries depends on the … |
| 1.3.6.1.4.1.2.6.191.9.1.1.1 | RowaixPrinterEntry | not-accessible | current | An entry of printerTable. Each entry contains all attributes of a defined printer or plotter. |
| 1.3.6.1.4.1.2.6.191.9.1.1.1.1 | ColumnaixPrinterName | read-only | current | When a printer or plotter device is added to the system, a name is automatically assigned to the device. On AIX, this name is in the format of lpx, for example… |
| 1.3.6.1.4.1.2.6.191.9.1.1.1.2 | ColumnaixPrinterIndex | read-only | current | The index of the printer table. |
| 1.3.6.1.4.1.2.6.191.9.1.1.1.3 | ColumnaixPrinterType | read-only | current | This is the type of the printer/plotter. The type can be the defined printer/plotter name such as hplj-8100 which represents Hewlett-Packard LaserJet 8100, or … |
| 1.3.6.1.4.1.2.6.191.9.1.1.1.4 | ColumnaixPrinterInterface | read-only | current | The printer/plotter interface with the computer. Its value can be parallel, rs232, or rs422. |
| 1.3.6.1.4.1.2.6.191.9.1.1.1.5 | ColumnaixPrinterStatus | read-only | current | Indicates the current status of the device. Possible values are available(1), indicating that the device is configured in the system and ready to use; and defi… |
| 1.3.6.1.4.1.2.6.191.9.1.1.1.6 | ColumnaixPrinterDescr | read-only | current | The description for the printer/plotter. |
| 1.3.6.1.4.1.2.6.191.9.1.1.1.7 | ColumnaixPrinterLocation | read-only | current | Location codes of 00-00-S1-00 or 00-00-S2-0 indicate the printer or plotter device is connected to the standard I/O serial ports s1 or s2. A location code of 0… |
| 1.3.6.1.4.1.2.6.191.9.1.1.1.8 | ColumnaixPrinterPortNumber | read-only | current | The printer port number. This indicates the port on an adapter card or asynchronous distribution box to which the printer or plotter is connected. The value mu… |
| 1.3.6.1.4.1.2.6.191.9.2 | NodeaixTape | |||
| 1.3.6.1.4.1.2.6.191.9.2.1 | TableaixTapeDrvTable | not-accessible | current | A table of defined tape drives. The number of entries depends on the configuration of the system. |
| 1.3.6.1.4.1.2.6.191.9.2.1.1 | RowaixTapeDrvEntry | not-accessible | current | An entry in the aixTapeDrvTable. Each entry contains all the attributes of a tape drive. |
| 1.3.6.1.4.1.2.6.191.9.2.1.1.1 | ColumnaixTapeDrvName | read-only | current | Identifies the logical name of the device. When a tape drive is added or defined in the system, a name is automatically assigned to the device. The format of t… |
| 1.3.6.1.4.1.2.6.191.9.2.1.1.2 | ColumnaixTapeDrvIndex | read-only | current | The index of the tape drive table. |
| 1.3.6.1.4.1.2.6.191.9.2.1.1.3 | ColumnaixTapeDrvType | read-only | current | Identifies the predefined device type of the tape drive. For example, 4mm2gb2 is a scsi 2.0 GB 4mm Tape Drive. |
| 1.3.6.1.4.1.2.6.191.9.2.1.1.4 | ColumnaixTapeDrvInterface | read-only | current | Identifies the type of tape drive interface. This is the same as the predefined device subclass of the device. |
| 1.3.6.1.4.1.2.6.191.9.2.1.1.5 | ColumnaixTapeDrvStatus | read-only | current | Indicates the current status of the tape drive. Possible values are available (1), indicating that the tape drive is configured in the system and ready to be u… |
| 1.3.6.1.4.1.2.6.191.9.2.1.1.6 | ColumnaixTapeDrvDescr | read-only | current | Provides a short text description of the tape drive device. |
| 1.3.6.1.4.1.2.6.191.9.2.1.1.7 | ColumnaixTapeDrvLocation | read-only | current | For all SCSI devices, including disks, CD-ROMs, read/write optical drives, tapes, target mode, and initiator devices, the location code format is AA-BB-CC-S,L.… |
| 1.3.6.1.4.1.2.6.191.9.2.1.1.8 | ColumnaixTapeDrvBlkSize | read-only | current | Indicates the block size to use when reading or writing to the tape. |
| 1.3.6.1.4.1.2.6.191.9.2.1.1.9 | ColumnaixTapeDrvManufacturerName | read-only | current | The name of the manufacturer of the tape drive. |
| 1.3.6.1.4.1.2.6.191.9.2.1.1.10 | ColumnaixTapeDrvModelName | read-only | current | The model name of the tape drive. |
| 1.3.6.1.4.1.2.6.191.9.2.1.1.11 | ColumnaixTapeDrvSN | read-only | current | The tape driver serial number. |
| 1.3.6.1.4.1.2.6.191.9.2.1.1.12 | ColumnaixTapeDrvPN | read-only | current | The tape driver part number. |
| 1.3.6.1.4.1.2.6.191.9.2.1.1.13 | ColumnaixTapeDrvFRU | read-only | current | The tape drive FRU number (Field Replaceable Unit). |
| 1.3.6.1.4.1.2.6.191.9.2.1.1.14 | ColumnaixTapeDrvEC | read-only | current | The tape drive EC (Engineering Change). |
| 1.3.6.1.4.1.2.6.191.9.3 | NodeaixHardDisk | |||
| 1.3.6.1.4.1.2.6.191.9.3.1 | TableaixHdTable | not-accessible | current | A table of defined hard disks. The number of entries depends on the configuration of the system. |
| 1.3.6.1.4.1.2.6.191.9.3.1.1 | RowaixHdEntry | not-accessible | current | An entry in hdTable. Each entry contains all the attributes of the individual hard disk. |
| 1.3.6.1.4.1.2.6.191.9.3.1.1.1 | ColumnaixHdName | read-only | current | Identifies the logical name of the disk device. |
| 1.3.6.1.4.1.2.6.191.9.3.1.1.2 | ColumnaixHdIndex | read-only | current | The index for the hard disk table. |
| 1.3.6.1.4.1.2.6.191.9.3.1.1.3 | ColumnaixHdType | read-only | current | Identifies the predefined device type of the disk. |
| 1.3.6.1.4.1.2.6.191.9.3.1.1.4 | ColumnaixHdSize | read-only | current | The size in megabytes of the hard disk. |
| 1.3.6.1.4.1.2.6.191.9.3.1.1.5 | ColumnaixHdInterface | read-only | current | Identifies the type of disk interface. This is the same as the predefined device subclass of the disk. |
| 1.3.6.1.4.1.2.6.191.9.3.1.1.6 | ColumnaixHdStatus | read-only | current | Indicates the current status of the disk device. Possible values are available(1), indicating that the disk device is configured in the system and ready to be … |
| 1.3.6.1.4.1.2.6.191.9.3.1.1.7 | ColumnaixHdLocation | read-only | current | For all SCSI devices, including disks, CD-ROMs, read/write optical drives, tapes, target mode, and initiator devices, the location code format is AA-BB-CC-S,L.… |
| 1.3.6.1.4.1.2.6.191.9.3.1.1.8 | ColumnaixHdIdentifier | read-only | current | Displays the unique physical volume identifier of the physical volume of a disk. If the disk is not a physical volume, this field value will be none. |
| 1.3.6.1.4.1.2.6.191.9.3.1.1.9 | ColumnaixHdDescr | read-only | current | Provides a short text description of the disk device. |
| 1.3.6.1.4.1.2.6.191.9.3.1.1.10 | ColumnaixHdManufacturerName | read-only | current | The name of the manufacturer of the hard drive. |
| 1.3.6.1.4.1.2.6.191.9.3.1.1.11 | ColumnaixHdModelName | read-only | current | The Model Name of the hard drive. |
| 1.3.6.1.4.1.2.6.191.9.3.1.1.12 | ColumnaixHdSN | read-only | current | The hard driver serial number. |
| 1.3.6.1.4.1.2.6.191.9.3.1.1.13 | ColumnaixHdPN | read-only | current | The hard driver part number. |
| 1.3.6.1.4.1.2.6.191.9.3.1.1.14 | ColumnaixHdFRU | read-only | current | The hard drive FRU number (Field Replaceable Unit). |
| 1.3.6.1.4.1.2.6.191.9.3.1.1.15 | ColumnaixHdEC | read-only | current | The hard drive Engineering Change. |
| 1.3.6.1.4.1.2.6.191.9.4 | NodeaixMemory | |||
| 1.3.6.1.4.1.2.6.191.9.4.1 | TableaixMemTable | not-accessible | current | A table of defined physical memory. The number of entries depends on the configuration of the system. |
| 1.3.6.1.4.1.2.6.191.9.4.1.1 | RowaixMemEntry | not-accessible | current | An entry in the memory table . |
| 1.3.6.1.4.1.2.6.191.9.4.1.1.1 | ColumnaixMemName | read-only | current | The name of the memory. For example, it may be mem0. |
| 1.3.6.1.4.1.2.6.191.9.4.1.1.2 | ColumnaixMemIndex | read-only | current | The index for the memory table. |
| 1.3.6.1.4.1.2.6.191.9.4.1.1.3 | ColumnaixMemLocation | read-only | current | The memory location code. An example is 00-00. |
| 1.3.6.1.4.1.2.6.191.9.4.1.1.4 | ColumnaixMemSize | read-only | current | The size of the physical memory in megabytes. |
| 1.3.6.1.4.1.2.6.191.9.4.1.1.5 | ColumnaixMemDescr | read-only | current | The description of memory |
| 1.3.6.1.4.1.2.6.191.9.5 | NodeaixCDROM | |||
| 1.3.6.1.4.1.2.6.191.9.5.1 | TableaixCdromTable | not-accessible | current | A table of all defined cdroms. |
| 1.3.6.1.4.1.2.6.191.9.5.1.1 | RowaixCdromEntry | not-accessible | current | An entry in the cdrom table . |
| 1.3.6.1.4.1.2.6.191.9.5.1.1.1 | ColumnaixCdromName | read-only | current | Identifies the logical name of the CD-ROM drive. |
| 1.3.6.1.4.1.2.6.191.9.5.1.1.2 | ColumnaixCdromIndex | read-only | current | The index for the CD-ROM table. |
| 1.3.6.1.4.1.2.6.191.9.5.1.1.3 | ColumnaixCdromType | read-only | current | Identifies the predefined device type of the CD-ROM drive. |
| 1.3.6.1.4.1.2.6.191.9.5.1.1.4 | ColumnaixCdromInterface | read-only | current | Identifies the type of drive interface. This is the same as the predefined device subclass of the CD-ROM drive. |
| 1.3.6.1.4.1.2.6.191.9.5.1.1.5 | ColumnaixCdromDescr | read-only | current | Provides a short text description of the CD-ROM drive device. |
| 1.3.6.1.4.1.2.6.191.9.5.1.1.6 | ColumnaixCdromStatus | read-only | current | Indicates the current status of the CD-ROM drive. Possible values are available(1), indicating that the CD-ROM drive is configured in the system and ready to b… |
| 1.3.6.1.4.1.2.6.191.9.5.1.1.7 | ColumnaixCdromLocation | read-only | current | For all SCSI devices, including disks, CD-ROMs, read/write optical drives, tapes, target mode, and initiator devices, the location code format is AA-BB-CC-S,L.… |
| 1.3.6.1.4.1.2.6.191.9.5.1.1.8 | ColumnaixCdromManufacturerName | read-only | current | The name of the manufacturer of the cdrom drive. |
| 1.3.6.1.4.1.2.6.191.9.5.1.1.9 | ColumnaixCdromModelName | read-only | current | The cdrom driver model name. |
| 1.3.6.1.4.1.2.6.191.9.5.1.1.10 | ColumnaixCdromPN | read-only | current | The cdrom driver part number. |
| 1.3.6.1.4.1.2.6.191.9.5.1.1.11 | ColumnaixCdromFRU | read-only | current | The cdrom drive FRU (Field Replaceable Unit). |
| 1.3.6.1.4.1.2.6.191.9.5.1.1.12 | ColumnaixCdromEC | read-only | current | The cdrom drive Engineering Change. |
| 1.3.6.1.4.1.2.6.191.9.6 | NodeaixScsi | |||
| 1.3.6.1.4.1.2.6.191.9.6.1 | TableaixScsiTable | not-accessible | current | A table of SCSI adapters. |
| 1.3.6.1.4.1.2.6.191.9.6.1.1 | RowaixScsiEntry | not-accessible | current | An entry of the SCSI adapter . |
| 1.3.6.1.4.1.2.6.191.9.6.1.1.1 | ColumnaixScsiName | read-only | current | Identifies the logical name of the adapter. |
| 1.3.6.1.4.1.2.6.191.9.6.1.1.2 | ColumnaixScsiIndex | read-only | current | The index for the scsi adapter table. |
| 1.3.6.1.4.1.2.6.191.9.6.1.1.3 | ColumnaixScsiDescr | read-only | current | Defines a short text description of the adapter. |
| 1.3.6.1.4.1.2.6.191.9.6.1.1.4 | ColumnaixScsiStatus | read-only | current | Indicates the current status of the adapter. Possible values are available, indicating that the adapter is configured in the system and ready to be used, and d… |
| 1.3.6.1.4.1.2.6.191.9.6.1.1.5 | ColumnaixScsiLocation | read-only | current | The location code for the SCSI adapter. An example is 04-C0. |
| 1.3.6.1.4.1.2.6.191.9.6.1.1.6 | ColumnaixScsiAdapterID | read-only | current | Specifies the SCSI ID value which the adapter will use when sending SCSI commands as an initiator device, and, if target mode is supported, specifies the SCSI … |
| 1.3.6.1.4.1.2.6.191.9.7 | NodeaixProcessor | |||
| 1.3.6.1.4.1.2.6.191.9.7.1 | TableaixProcessorTable | not-accessible | current | A table of processors. |
| 1.3.6.1.4.1.2.6.191.9.7.1.1 | RowaixProcessorEntry | not-accessible | current | An entry of the Processor . |
| 1.3.6.1.4.1.2.6.191.9.7.1.1.1 | ColumnaixProcessorName | read-only | current | Identifies the logical name of the processor. |
| 1.3.6.1.4.1.2.6.191.9.7.1.1.2 | ColumnaixProcessorIndex | read-only | current | The index for the processor table. |
| 1.3.6.1.4.1.2.6.191.9.7.1.1.3 | ColumnaixProcessorType | read-only | current | Defines the model type of the processor. For example: PowerPC_604e |
| 1.3.6.1.4.1.2.6.191.9.7.1.1.4 | ColumnaixProcessorDescr | read-only | current | Defines a short text description of the processor. |
| 1.3.6.1.4.1.2.6.191.9.7.1.1.5 | ColumnaixProcessorSpeed | read-only | current | The speed of the processor in hertz. |
| 1.3.6.1.4.1.2.6.191.9.8 | NodeaixNetwork | |||
| 1.3.6.1.4.1.2.6.191.9.8.1 | TableaixNetworkTable | not-accessible | current | A table of Network adapters. |
| 1.3.6.1.4.1.2.6.191.9.8.1.1 | RowaixNetworkEntry | not-accessible | current | An entry of the Network adapter . |
| 1.3.6.1.4.1.2.6.191.9.8.1.1.1 | ColumnaixNetworkName | read-only | current | Identifies the logical name of the network adapter. |
| 1.3.6.1.4.1.2.6.191.9.8.1.1.2 | ColumnaixNetworkIndex | read-only | current | The index for the network adapter table. |
| 1.3.6.1.4.1.2.6.191.9.8.1.1.3 | ColumnaixNetworkType | read-only | current | The type of the network adapter. An example is ie3. |
| 1.3.6.1.4.1.2.6.191.9.8.1.1.4 | ColumnaixNetworkInterface | read-only | current | The interface name for the Network adapter. An example is LO. |
| 1.3.6.1.4.1.2.6.191.9.8.1.1.5 | ColumnaixNetworkStatus | read-only | current | Indicates the current status of the adapter. Possible values are available, indicating that the adapter is configured in the system and ready to be used, and d… |
| 1.3.6.1.4.1.2.6.191.9.8.1.1.6 | ColumnaixNetworkLocation | read-only | current | The location code for the Network adapter. An example is 10-60. |
| 1.3.6.1.4.1.2.6.191.9.8.1.1.7 | ColumnaixNetworkDescr | read-only | current | Defines a short text description of the adapter. An example is IEEE 802.3 Ethernet Network Interface |
| 1.3.6.1.4.1.2.6.191.9.9 | NodeaixAdapter | |||
| 1.3.6.1.4.1.2.6.191.9.9.1 | TableaixAdapterTable | not-accessible | current | A table of adapters. |
| 1.3.6.1.4.1.2.6.191.9.9.1.1 | RowaixAdapterEntry | not-accessible | current | An entry of the adapter |
| 1.3.6.1.4.1.2.6.191.9.9.1.1.1 | ColumnaixAdapterName | read-only | current | Identifies the logical name of the adapter. |
| 1.3.6.1.4.1.2.6.191.9.9.1.1.2 | ColumnaixAdapterIndex | read-only | current | The index for the adapter table. |
| 1.3.6.1.4.1.2.6.191.9.9.1.1.3 | ColumnaixAdapterType | read-only | current | The type of the adapter. An example is keyboard. |
| 1.3.6.1.4.1.2.6.191.9.9.1.1.4 | ColumnaixAdapterInterface | read-only | current | The interface name for the adapter. An example is pci. |
| 1.3.6.1.4.1.2.6.191.9.9.1.1.5 | ColumnaixAdapterStatus | read-only | current | Indicates the current status of the . Possible values are available, indicating that the is configured in the system and ready to be used, and defined, indicat… |
| 1.3.6.1.4.1.2.6.191.9.9.1.1.6 | ColumnaixAdapterLocation | read-only | current | The location code for the adapter. An example is 01-K1-00. |
| 1.3.6.1.4.1.2.6.191.9.9.1.1.7 | ColumnaixAdapterDescr | read-only | current | Defines a short text description of the . An example is Keyboard Adapter |
| 1.3.6.1.4.1.2.6.191.10 | NodeaixConformance | |||
| 1.3.6.1.4.1.2.6.191.10.1 | NodeaixCfmGroup | |||
| 1.3.6.1.4.1.2.6.191.10.1.1 | GroupaixAgentGroup | current | The objects necessary to control and show information about the subagent. | |
| 1.3.6.1.4.1.2.6.191.10.1.2 | GroupaixSeGroup | current | The objects neccessary to control and show information about the system environment. These objects are mandatory. | |
| 1.3.6.1.4.1.2.6.191.10.1.3 | GroupcriticalNotificationGroup | current | These objects are used to send traps. | |
| 1.3.6.1.4.1.2.6.191.10.1.4 | GroupaixVGGroup | current | The objects neccessary for controlling and showing information about the volume group. | |
| 1.3.6.1.4.1.2.6.191.10.1.5 | GroupaixLVGroup | current | The objects neccessary for controlling and showing information about logical volumes. | |
| 1.3.6.1.4.1.2.6.191.10.1.6 | GroupaixPVGroup | current | The objects neccessary for controlling and showing information about physical volumes. | |
| 1.3.6.1.4.1.2.6.191.10.1.7 | GroupaixPagingSpaceGroup | current | The objects neccessary for controlling and showing information about paging space. | |
| 1.3.6.1.4.1.2.6.191.10.1.8 | GroupaixFsGroup | current | The objects neccessary for controlling and showing information about file systems. | |
| 1.3.6.1.4.1.2.6.191.10.1.9 | GroupaixProcessGroup | current | The objects neccessary for controlling and showing information about processes. | |
| 1.3.6.1.4.1.2.6.191.10.1.10 | GroupaixLoginUsrGroup | current | The objects neccessary for controlling and showing information about users currently logged in. | |
| 1.3.6.1.4.1.2.6.191.10.1.11 | GroupaixPrtQueueGroup | current | The objects neccessary for controlling and showing information about print queues. | |
| 1.3.6.1.4.1.2.6.191.10.1.12 | GroupaixUsrGroup | current | The objects neccessary for controlling and showing information about system users. | |
| 1.3.6.1.4.1.2.6.191.10.1.13 | GroupaixGrpGroup | current | The objects neccessary for controlling and showing information about system groups. | |
| 1.3.6.1.4.1.2.6.191.10.1.14 | GroupaixSubSystemGroup | current | The objects neccessary for controlling and showing information about subsystems. | |
| 1.3.6.1.4.1.2.6.191.10.1.15 | GroupaixSubServerGroup | current | The objects neccessary for controlling and showing information about subservers. | |
| 1.3.6.1.4.1.2.6.191.10.1.16 | GroupaixSeAuxGroup | current | The objects neccessary for controlling and showing information about the system environment. These objects are optional. | |
| 1.3.6.1.4.1.2.6.191.10.1.17 | GroupaixPrinterGroup | current | The objects neccessary for showing information about the printer. | |
| 1.3.6.1.4.1.2.6.191.10.1.18 | GroupaixTapeGroup | current | The objects neccessary for showing information about the tape. | |
| 1.3.6.1.4.1.2.6.191.10.1.19 | GroupaixHardDiskGroup | current | The objects neccessary for showing information about the hard disk. | |
| 1.3.6.1.4.1.2.6.191.10.1.20 | GroupaixMemoryGroup | current | The objects neccessary for showing information about the memory. | |
| 1.3.6.1.4.1.2.6.191.10.1.21 | GroupaixCDROMGroup | current | The objects neccessary for showing information about the CDROM. | |
| 1.3.6.1.4.1.2.6.191.10.1.22 | GroupaixScsiGroup | current | The objects neccessary for showing information about the SCSI adapter. | |
| 1.3.6.1.4.1.2.6.191.10.1.23 | GroupaixProcessorGroup | current | The objects neccessary for showing information about the processors. | |
| 1.3.6.1.4.1.2.6.191.10.1.24 | GroupaixNetworkGroup | current | The objects neccessary for showing information about the Network adapters. | |
| 1.3.6.1.4.1.2.6.191.10.1.25 | GroupaixAdapterGroup | current | The objects neccessary for showing information about the adapters. | |
| 1.3.6.1.4.1.2.6.191.10.2 | NodeaixCompliances | |||
| 1.3.6.1.4.1.2.6.191.10.2.1 | ComplianceaixCompliance | current | The statement of compliance. |