IBM-BCCUSTOM-MIB
94 objects
The MIB module is to get the details of Pharos Embedded switch. copyright (c) 1996-2003 Brocade Communications Systems, Inc. All rights reserved.
Imported Objects
| INET-ADDRESS-MIB | InetAddress |
| SNMPv2-SMI | enterprises Integer32 IpAddress OBJECT-IDENTITY OBJECT-TYPE |
| SNMPv2-TC | DisplayString TEXTUAL-CONVENTION |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2 | Nodeibm | |||
| 1.3.6.1.4.1.2.6 | NodeibmProd | |||
| 1.3.6.1.4.1.2.6.215 | IdentitybcCustom | The MIB module is to get the details of Pharos Embedded switch. copyright (c) 1996-2003 Brocade Communications Systems, Inc. All rights reserved. | ||
| 1.3.6.1.4.1.2.6.215.1 | IdentitybcCustomMibVersion | current | The OID subtree for version information | |
| 1.3.6.1.4.1.2.6.215.1.1 | NodemibCustomVersion | |||
| 1.3.6.1.4.1.2.6.215.1.1.1 | ScalarmibMajorMinor | read-only | current | The MIB major and minor version number is a 4 byte value of the form xx:xx:yy:yy. The higher 2 byte (xx:xx) is for the major version number. The lower 2 byte (… |
| 1.3.6.1.4.1.2.6.215.1.2 | NodeiomGlobal | |||
| 1.3.6.1.4.1.2.6.215.1.2.1 | ScalariomCapability | read-only | current | The AMM will use this object read the IOM capabilities. The IOM must set its capabilities prior to its POST transition. The unsigned INTEGER value will be trea… |
| 1.3.6.1.4.1.2.6.215.1.2.2 | ScalariomMode | read-only | current | This MIB object provides the ability to read and write the current operation mode of operation of the IOM |
| 1.3.6.1.4.1.2.6.215.2 | Identityports | current | The OID subtree for Portmodule details | |
| 1.3.6.1.4.1.2.6.215.2.1 | NodeportInformation | |||
| 1.3.6.1.4.1.2.6.215.2.1.1 | TableportInformationTable | not-accessible | current | Table that contains port information for the I/O Module. |
| 1.3.6.1.4.1.2.6.215.2.1.1.1 | RowportInformationEntry | not-accessible | current | I/O Module port entry |
| 1.3.6.1.4.1.2.6.215.2.1.1.1.1 | ColumnportModuleIndex | read-only | current | I/O Module port sequence index. |
| 1.3.6.1.4.1.2.6.215.2.1.1.1.2 | ColumnportModuleType | read-only | current | Indicates the given port type of the I/O Module. The definitions of port types are: unUsed: the value of zero indicates the request is for a real port index of… |
| 1.3.6.1.4.1.2.6.215.2.1.1.1.3 | ColumnportModuleLinkState | read-write | current | The current port link state of the I/O Module. down: the physical port is down or off. up: the physical port 817 is up and active initialized: the physical por… |
| 1.3.6.1.4.1.2.6.215.2.1.1.1.4 | ColumnportModuleLabel | read-write | current | The port string label of the I/O module. The IOM may allow for the port label to be configured from the I/O Modules user interface but the default port label m… |
| 1.3.6.1.4.1.2.6.215.2.1.1.1.5 | ColumnportModuleSpeed | read-write | current | The INTEGER value will indicate the current speed of the port. The INTEGER values are defined as follows: A signed value is Half duplex, A unsigned value is FU… |
| 1.3.6.1.4.1.2.6.215.2.1.1.1.6 | ColumnportModuleMedia | read-only | current | The port media type of the I/O Module. |
| 1.3.6.1.4.1.2.6.215.2.1.1.1.7 | ColumnportModuleProtocol | read-only | current | The port protocol of the I/O Module. |
| 1.3.6.1.4.1.2.6.215.2.1.1.1.8 | ColumnportModuleTotal | read-only | current | This value must return the the total number of ports supported on the IOM. This value must be customized Note: When an IOM supports the ability to activate add… |
| 1.3.6.1.4.1.2.6.215.2.1.1.1.9 | ColumnportModuleSpeedList | read-only | current | The string contains all the available speed settings that is applicable to the port. It is a special format so the application can parse the string to obtain a… |
| 1.3.6.1.4.1.2.6.215.2.1.1.1.10 | ColumnportModuleReal | read-only | current | To map from relative port index based on port type to the real port index of the server. |
| 1.3.6.1.4.1.2.6.215.2.1.1.1.11 | ColumnportModuleRelative | read-only | current | To map from real port index to the relative port index of the server. |
| 1.3.6.1.4.1.2.6.215.2.1.1.1.12 | ColumnportModuleLaneCount | read-only | current | The value represents the number of lanes supported by the port. |
| 1.3.6.1.4.1.2.6.215.2.1.1.1.13 | ColumnportModuleCableLength | read-only | current | The length (in meters) of the cable supported by this port. |
| 1.3.6.1.4.1.2.6.215.2.1.1.1.14 | ColumnportModuleCableManufacturer | read-only | current | A string that contains the cable manufacturer. The name cannot exceed 64 1028 octets. |
| 1.3.6.1.4.1.2.6.215.2.1.1.1.15 | ColumnportModuleCableCompatiblity | read-only | current | Indicates the compatibility of the external cable which is currently plugged into this port. |
| 1.3.6.1.4.1.2.6.215.2.1.1.1.16 | ColumnportModuleCableType | read-only | current | A string that designates the external cable type for this port. The name cannot exceed 64 octets. For example, Active Copper, Passive Copper, Active Fibre, Pas… |
| 1.3.6.1.4.1.2.6.215.2.1.1.1.17 | ColumnportModuleDataRate | read-only | current | The value represents the data rate supported for this port. SDR (single data rate), DDR (double data rate), QDR (quad data rate), EDR (enhanced data rate), FDR… |
| 1.3.6.1.4.1.2.6.215.2.1.1.1.18 | ColumnportModuleLicensedState | read-only | current | The value represents the port license state. If this port is a base port that does not require a license key then the state will always indicate notApplicable.… |
| 1.3.6.1.4.1.2.6.215.3 | Identityfirmware | current | The OID subtree for Firmware operations | |
| 1.3.6.1.4.1.2.6.215.3.1 | NodefirmwareOps | |||
| 1.3.6.1.4.1.2.6.215.3.1.1 | TablefwInformationTable | not-accessible | current | Table of Firmware Image information. |
| 1.3.6.1.4.1.2.6.215.3.1.1.1 | RowfwInformationEntry | not-accessible | current | I/O Module Firmware Image entry |
| 1.3.6.1.4.1.2.6.215.3.1.1.1.1 | ColumnfwImageIndex | read-only | current | Firmware Image index. |
| 1.3.6.1.4.1.2.6.215.3.1.1.1.2 | ColumnfwImageInformation | read-only | current | Information about the image - This string must follow the format below: Version: %s\n, Rel-Date: %s\n, Status: %s\n, Type: %s\n, Size: %s\n, Other-Info: %s\n\ … |
| 1.3.6.1.4.1.2.6.215.3.1.1.1.3 | ColumnfwImageFileLocation | read-only | current | This object indicates whether the IOM implementation of firmware updates has requirements on the server that would prevent the MM acting as the server for the … |
| 1.3.6.1.4.1.2.6.215.3.1.1.1.4 | ColumnfwImageProtocols | read-only | current | The CMM will use this command to read the current supported and enabled IOM file transfer protocols. The bit mask is treated as 32 bits in network byte order. … |
| 1.3.6.1.4.1.2.6.215.3.1.1.1.5 | ColumnfwImageIsUpdateable | read-only | current | This object indicates whether the firmware image index can be updated separately using one of the indicated file transfer mechanisms from 'fwImageProtocol'. If… |
| 1.3.6.1.4.1.2.6.215.3.1.2 | NodefirmwareCmd | |||
| 1.3.6.1.4.1.2.6.215.3.1.2.1 | ScalarfirmwareImageCnt | read-only | current | The I/O Module must indicate the number of firmware images that can be updated. For example a value of 0 should be used if no images can be updated, a value of… |
| 1.3.6.1.4.1.2.6.215.3.1.2.2 | ScalarfirmwareImageNum | read-write | current | This value indicates the image number that will be updated. For example, if the value is 2, that means firmware image 2 must be updated on the I/O Module. This… |
| 1.3.6.1.4.1.2.6.215.3.1.2.3 | ScalarfirmwareAction | read-write | current | The action the I/O Module must take for the firmware update operation.Upon receiving this command IOM must immediately execute the operation with all the neces… |
| 1.3.6.1.4.1.2.6.215.3.1.2.4 | ScalarfwUpdateOperationStatus | read-only | current | The status of the firmware update operation 0: No operation pending. 1-100: the percentage of completion of the update operation. 101: success. 201: failed |
| 1.3.6.1.4.1.2.6.215.3.1.2.5 | ScalarfirmwareServer | read-only | current | This is a string of information about the final result of firmware update operation. It will further qualify in detail the information provided by the firmware… |
| 1.3.6.1.4.1.2.6.215.3.1.2.6 | ScalarfwUpdateImageActivation | read-write | current | This value indicates which image index that the I/O Module must immediately activate. |
| 1.3.6.1.4.1.2.6.215.3.1.2.7 | ScalarfwUpdateImageUri | read-write | current | This is a URI string specifies the protocol and various location parameters to be used by the switch to perform a get operation using any of the supported prot… |
| 1.3.6.1.4.1.2.6.215.3.1.2.8 | ScalarfwUpdateImageSftpRsaKey | read-write | deprecated | Contains the public 1024 bit RSA key used for a secure file transfer utilizing sFTP over a SSH connection.The CMM will issue a set (write) of this object with … |
| 1.3.6.1.4.1.2.6.215.4 | Identityfiles | current | The OID subtree for various file operations | |
| 1.3.6.1.4.1.2.6.215.4.1 | NodesystemFile | |||
| 1.3.6.1.4.1.2.6.215.4.1.1 | TablesystemFileInformationTable | not-accessible | current | Table of System File information. |
| 1.3.6.1.4.1.2.6.215.4.1.1.1 | RowsystemFileInformationEntry | not-accessible | current | I/O Module System File entry |
| 1.3.6.1.4.1.2.6.215.4.1.1.1.1 | ColumnsystemFileIndex | read-only | current | System File index. |
| 1.3.6.1.4.1.2.6.215.4.1.1.1.2 | ColumnsystemFileInformation | read-only | current | Information about the system file(s) that are supported by the IOM, on which the CMM can perform a get or put operation from/to the IOM. Two types of files are… |
| 1.3.6.1.4.1.2.6.215.4.1.1.1.3 | ColumnsystemFileInformationProtocols | read-only | current | The CMM will use this command to read the current supported and enabled IOM file transfer protocols. The bit mask is treated as 32 bits in network byte order. … |
| 1.3.6.1.4.1.2.6.215.4.2 | NodesystemFileCmd | |||
| 1.3.6.1.4.1.2.6.215.4.2.1 | ScalarsystemFileCmdCnt | read-only | current | The I/O Module must indicate the number of system files that it has available to user. For an example a value of 0 should be used if it has no system file, a v… |
| 1.3.6.1.4.1.2.6.215.4.2.2 | ScalarsystemFileCmdFilename | read-write | deprecated | The system file name and category of the file set by AMM that the I/O Module must use to perform an operation on the file. The string format of this command is… |
| 1.3.6.1.4.1.2.6.215.4.2.3 | ScalarsystemFileCmdMaxSize | read-write | current | The AMM will set the maximum file size allowable for the IOM system file when IOM upload its system file to a remote server. IOM must not exceed this file size… |
| 1.3.6.1.4.1.2.6.215.4.2.4 | ScalarsystemFileCmdUri | read-write | current | This is a URI string that specifies the location and various parameters to be used by the switch to perform a get or put operation using any of the supported p… |
| 1.3.6.1.4.1.2.6.215.4.2.5 | ScalarsystemFileCmdSftpRsaKey | read-write | deprecated | Contains the public 1024 bit RSA key used for a secure a file transfer utilizing sFTP over a SSH connection. The CMM will issue a set (write) of this object wi… |
| 1.3.6.1.4.1.2.6.215.4.2.6 | ScalarsystemFileCmdExecuteOp | read-write | current | The action the I/O Module must take on the system file MAX-ACCESS operation. Upon receiving this command IOM must immediately execute the operation with all th… |
| 1.3.6.1.4.1.2.6.215.4.2.7 | ScalarsystemFileOperationStatus | read-only | current | The status of the system file operation: 0: No operation pending. 1: Switch starting to generate supportshow 50: Switch done generating supportshow 51: Switch … |
| 1.3.6.1.4.1.2.6.215.4.2.8 | ScalarsystemFileOpStatusString | read-only | current | This is a string of information about the final result of system file operation. It will further qualify in detail the information provided by the system file … |
| 1.3.6.1.4.1.2.6.215.4.2.9 | ScalarsystemFileActivation | read-write | current | This object is used only for configuration files. After the transfer of the configuration file is completed to the IOM the CMM can use this object to immediate… |
| 1.3.6.1.4.1.2.6.215.5 | Identityprotocols | current | The OID subtree for various protocol configuration operations | |
| 1.3.6.1.4.1.2.6.215.5.1 | NodentpConfig | |||
| 1.3.6.1.4.1.2.6.215.5.1.1 | ScalarntpEnable | read-write | current | Disable/Enable the NTP client. When set to enabled the MM previously set the following additional NTP client objects The NTP client must then be configured to … |
| 1.3.6.1.4.1.2.6.215.5.1.2 | ScalarntpSrvIpv6Address | read-write | current | NTP server's IPv6 address. Note: This address represents the address that will be used for NTP requests and responses that utilize the MM internal port. A valu… |
| 1.3.6.1.4.1.2.6.215.5.1.3 | ScalarntpSrvIpv4Address | read-write | current | NTP server's IPv4 address. Note: This address represents the address that will be used for NTP requests and responses that utilize the MM internal port. A valu… |
| 1.3.6.1.4.1.2.6.215.5.1.4 | ScalarntpUpdateFrequency | read-write | current | The frequency in minutes that the NTP client service will synchronize the local clock with the NTP server. The value range is 1 to 44640 minutes. Note: certain… |
| 1.3.6.1.4.1.2.6.215.5.1.5 | Scalarntpv3AuthConfig | read-write | current | The NTP v3 authentication entry to be used for time sync with a secure NTP server. The format of an authentication entry is <key index>::<key type>::<key>. The… |
| 1.3.6.1.4.1.2.6.215.5.1.6 | Scalarntpv3AuthEnable | read-write | current | Enables/Disables NTPv3 authentication |
| 1.3.6.1.4.1.2.6.215.6 | Identitysnmpuser | current | The OID subtree for SNMPV3 user configuration operations | |
| 1.3.6.1.4.1.2.6.215.6.1 | NodeiomSnmpv3Cfg | |||
| 1.3.6.1.4.1.2.6.215.6.1.1 | ScalariomSnmpv3UserName | read-write | current | String that contains the SNMPv3 userid. Note: this IOM<92>s SNMPv3 user account configuration must not be allowed to be altered from any of the IOM UI<92>s. |
| 1.3.6.1.4.1.2.6.215.6.1.2 | ScalariomSnmpv3UserAuthProtocol | read-write | current | SNMPv3 - Authentication Protocol supported by the user. The only allowed protocol is <91>SHA<92>. |
| 1.3.6.1.4.1.2.6.215.6.1.3 | ScalariomSnmpv3UserAuthPassword | read-write | current | SNMPv3 User - Authentication password string. Notes: (1) The MM does not validate the contents of the password against any password security rules, the IOM is … |
| 1.3.6.1.4.1.2.6.215.6.1.4 | ScalariomSnmpv3UserPrivacyProtocol | read-write | current | SNMPv3 - Privacy Protocol supported by the user. The only allowed protocol is <91>AES<92>. |
| 1.3.6.1.4.1.2.6.215.6.1.5 | ScalariomSnmpv3UserPrivacyPassword | read-write | current | SNMPv3 User - Privacy password string. Notes: (1) The MM does not validate the contents of the password against any password security rules, the IOM is respons… |
| 1.3.6.1.4.1.2.6.215.6.1.6 | ScalariomSnmpv3UserAccessType | read-write | current | SNMPv3 User Access level (Get, Set, and Traps) of the user. |
| 1.3.6.1.4.1.2.6.215.6.1.7 | ScalariomSnmpv3UserIPv6TrapAddress | read-write | current | Trap destination IPv6 address. Note: This address represents the address that will be used by an external application for receiving SNMPv3 traps directly from … |
| 1.3.6.1.4.1.2.6.215.6.1.8 | ScalariomSnmpv3UserIPv4TrapAddress | read-write | current | Trap destination IP4 address. Note: This address represents the address that will be used by an external application for receiving SNMPv3 traps directly from t… |
| 1.3.6.1.4.1.2.6.215.6.1.9 | ScalariomSnmpv3UserState | read-write | current | Indicates the state of the user: Enabled or Disabled. The sequence of creating and enabling a user account or changing various OID<92>s of the SNMPv3 user acco… |
| 1.3.6.1.4.1.2.6.215.6.1.10 | ScalariomSnmpv3UserStateStatusString | read-only | current | This object will be a bit string that contains detailed information about the SNMPv3 user account status. The intent is that the information string will be pas… |
| 1.3.6.1.4.1.2.6.215.6.1.11 | ScalariomSnmpv3TestTrap | read-write | current | This object provides a mechanism to generate a <91>test trap<92>. A set of this object will only generate a <91>test trap<92> from the IOM If a valid SNMPv3 us… |
| 1.3.6.1.4.1.2.6.215.6.1.12 | ScalariomSnmpv3tResetUser | read-write | current | This object provides a method to reset all the other objects that make up the SNMPv3 user account back to default values. This may be used for security reasons… |
| 1.3.6.1.4.1.2.6.215.7 | Identitylicense | current | The OID subtree for feature license key configuration operations | |
| 1.3.6.1.4.1.2.6.215.7.1 | TablelicenseKeyInformationTable | not-accessible | current | Table of License key information. |
| 1.3.6.1.4.1.2.6.215.7.1.1 | RowlicenseKeyInformationEntry | not-accessible | current | License Key entry |
| 1.3.6.1.4.1.2.6.215.7.1.1.1 | ColumnlicenseKeyIndex | read-only | current | License Key index. |
| 1.3.6.1.4.1.2.6.215.7.1.1.2 | ColumnlicenseKeyDescStringInformation | read-only | current | Information about the system file - This string must follow the format below: Description: %s\n, Date-Time: %s\n, License-ID: %s\n, Other-Info: %s\n\0 Descript… |
| 1.3.6.1.4.1.2.6.215.7.1.1.3 | ColumnlicenseKeyCurrentState | read-only | current | Provides information on the current state of the license |