IBM-OSA-MIB
196 objects
The IBM Enterprise Specific MIB definitions for enabling management of an IBM OSA-Express feature. Licensed Materials - Property of IBM Restricted Materials of IBM 5694-A01 (C) Copyright IBM Corp. 2002 US Government Users Restricted Rights - Use, duplication or disclosure restricted by GSA ADP Schedule Contract with IBM Corp.
Imported Objects
| IF-MIB | -- RFC2571 ifIndex |
| SNMP-FRAMEWORK-MIB | -- RFC2580 -- SnmpAdminString -- |
| SNMPv2-CONF | -- RFC2579 -- NOTIFICATION-GROUP MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | -- NOTIFICATION-TYPE Counter32 Counter64 Gauge32 Integer32 IpAddress MODULE-IDENTITY OBJECT-TYPE TimeTicks Unsigned32 enterprises |
| SNMPv2-TC | -- RFC2578 -- TEXTUAL-CONVENTION DateAndTime DisplayString RowStatus TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2 | Nodeibm | |||
| 1.3.6.1.4.1.2.6 | NodeibmProd | |||
| 1.3.6.1.4.1.2.6.188 | IdentityibmOSAMib | The IBM Enterprise Specific MIB definitions for enabling management of an IBM OSA-Express feature. Licensed Materials - Property of IBM Restricted Materials of… | ||
| 1.3.6.1.4.1.2.6.188.1 | NodeibmOSAMibObjects | |||
| 1.3.6.1.4.1.2.6.188.1.1 | TableibmOSAExpChannelTable | not-accessible | current | Indexed by ifIndex. One entry in this table will exist per OSA Device Interface. |
| 1.3.6.1.4.1.2.6.188.1.1.1 | RowibmOSAExpChannelEntry | not-accessible | current | Definition of a single entry in the ibmOSAExpChannelTable. Indexed by the ifIndex of the corresponding Device interface. |
| 1.3.6.1.4.1.2.6.188.1.1.1.1 | ColumnibmOSAExpChannelNumber | read-only | current | The CHPID corresponding to this ifIndex. |
| 1.3.6.1.4.1.2.6.188.1.1.1.2 | ColumnibmOSAExpChannelType | read-only | current | The type of channel for this interface. OSA Direct Express has a value of 17. |
| 1.3.6.1.4.1.2.6.188.1.1.1.3 | ColumnibmOSAExpChannelHdwLevel | read-only | current | Hardware model of the channel. The value oasExp150(2) indicates a hardware level of 1.50. The value oasExp175(3) indicates a hardware level of 1.75. |
| 1.3.6.1.4.1.2.6.188.1.1.1.4 | ColumnibmOSAExpChannelSubType | read-only | current | Indicates the type of OSA feature present. |
| 1.3.6.1.4.1.2.6.188.1.1.1.5 | ColumnibmOSAExpChannelShared | read-only | current | An OSA-Express feature can be shared across multiple LPs. This object indicates if this feature is currently being shared between LPs |
| 1.3.6.1.4.1.2.6.188.1.1.1.6 | ColumnibmOSAExpChannelNodeDesc | read-only | current | This is the Node Descriptor of the OSA feature. It represents the ND obtained from the Channel Subsystem. Bits Name Flag is first byte char(1) Validity Valid -… |
| 1.3.6.1.4.1.2.6.188.1.1.1.8 | ColumnibmOSAExpChannelProcCodeLevel | read-only | current | This is the firmware (or micro code level) of the OSA feature. For example, OSA code level 05.6A would be represented as 0x056A. |
| 1.3.6.1.4.1.2.6.188.1.1.1.9 | ColumnibmOSAExpChannelPCIBusUtil1Min | read-only | current | The average, over a 1 minute interval, of the percentage of time that the PCI bus was utilized to transfer data. It does not include idle time or time used by … |
| 1.3.6.1.4.1.2.6.188.1.1.1.10 | ColumnibmOSAExpChannelProcUtil1Min | read-only | current | The average, over a 1 minute interval, of the percentage of time that the CHPID Processor was utilized to transfer data. It does not include idle time or time … |
| 1.3.6.1.4.1.2.6.188.1.1.1.11 | ColumnibmOSAExpChannelPCIBusUtil5Min | read-only | current | The average, over a 5 minute interval, of the percentage of time that the PCI bus was utilized to transfer data. It does not include idle time or time used by … |
| 1.3.6.1.4.1.2.6.188.1.1.1.12 | ColumnibmOSAExpChannelProcUtil5Min | read-only | current | The average, over a 5 minute interval, of the percentage of time that the CHPID Processor was utilized to transfer data. It does not include idle time or time … |
| 1.3.6.1.4.1.2.6.188.1.1.1.13 | ColumnibmOSAExpChannelPCIBusUtilHour | read-only | current | The average, over an hour interval, of the percentage of time that the PCI bus was utilized to transfer data. It does not include idle time or time used by rou… |
| 1.3.6.1.4.1.2.6.188.1.1.1.14 | ColumnibmOSAExpChannelProcUtilHour | read-only | current | The average, over an hour interval, of the percentage of time that the CHPID Processor was utilized to transfer data. It does not include idle time or time use… |
| 1.3.6.1.4.1.2.6.188.1.2 | TableibmOSAExpPerfTable | not-accessible | current | This table provides performance information for each Logical Partition (LP) the OSA can connect to. |
| 1.3.6.1.4.1.2.6.188.1.2.1 | RowibmOSAExpPerfEntry | not-accessible | current | Definition of a single entry for a single LP in the ibmOSAExpPerfTable. Indexed by the ifIndex of the corresponding Device interface. |
| 1.3.6.1.4.1.2.6.188.1.2.1.1 | ColumnibmOSAExpPerfDataLP0 | read-only | current | The performance data on this OSA for partition 0. The 40 bytes of hex data that are returned are decoded as follows: Offset Bytes Field Meaning 0 4 LP Number 4… |
| 1.3.6.1.4.1.2.6.188.1.2.1.2 | ColumnibmOSAExpPerfDataLP1 | read-only | current | The performance data on this OSA for partition 1. The 40 bytes of hex data that are returned are decoded the same as for partition 0. |
| 1.3.6.1.4.1.2.6.188.1.2.1.3 | ColumnibmOSAExpPerfDataLP2 | read-only | current | The performance data on this OSA for partition 2. The 40 bytes of hex data that are returned are decoded the same as for partition 0. |
| 1.3.6.1.4.1.2.6.188.1.2.1.4 | ColumnibmOSAExpPerfDataLP3 | read-only | current | The performance data on this OSA for partition 3. The 40 bytes of hex data that are returned are decoded the same as for partition 0. |
| 1.3.6.1.4.1.2.6.188.1.2.1.5 | ColumnibmOSAExpPerfDataLP4 | read-only | current | The performance data on this OSA for partition 4. The 40 bytes of hex data that are returned are decoded the same as for partition 0. |
| 1.3.6.1.4.1.2.6.188.1.2.1.6 | ColumnibmOSAExpPerfDataLP5 | read-only | current | The performance data on this OSA for partition 5. The 40 bytes of hex data that are returned are decoded the same as for partition 0. |
| 1.3.6.1.4.1.2.6.188.1.2.1.7 | ColumnibmOSAExpPerfDataLP6 | read-only | current | The performance data on this OSA for partition 6. The 40 bytes of hex data that are returned are decoded the same as for partition 0. |
| 1.3.6.1.4.1.2.6.188.1.2.1.8 | ColumnibmOSAExpPerfDataLP7 | read-only | current | The performance data on this OSA for partition 7. The 40 bytes of hex data that are returned are decoded the same as for partition 0. |
| 1.3.6.1.4.1.2.6.188.1.2.1.9 | ColumnibmOSAExpPerfDataLP8 | read-only | current | The performance data on this OSA for partition 8. The 40 bytes of hex data that are returned are decoded the same as for partition 0. |
| 1.3.6.1.4.1.2.6.188.1.2.1.10 | ColumnibmOSAExpPerfDataLP9 | read-only | current | The performance data on this OSA for partition 9. The 40 bytes of hex data that are returned are decoded the same as for partition 0. |
| 1.3.6.1.4.1.2.6.188.1.2.1.11 | ColumnibmOSAExpPerfDataLP10 | read-only | current | The performance data on this OSA for partition 10. The 40 bytes of hex data that are returned are decoded the same as for partition 0. |
| 1.3.6.1.4.1.2.6.188.1.2.1.12 | ColumnibmOSAExpPerfDataLP11 | read-only | current | The performance data on this OSA for partition 11. The 40 bytes of hex data that are returned are decoded the same as for partition 0. |
| 1.3.6.1.4.1.2.6.188.1.2.1.13 | ColumnibmOSAExpPerfDataLP12 | read-only | current | The performance data on this OSA for partition 12. The 40 bytes of hex data that are returned are decoded the same as for partition 0. |
| 1.3.6.1.4.1.2.6.188.1.2.1.14 | ColumnibmOSAExpPerfDataLP13 | read-only | current | The performance data on this OSA for partition 13. The 40 bytes of hex data that are returned are decoded the same as for partition 0. |
| 1.3.6.1.4.1.2.6.188.1.2.1.15 | ColumnibmOSAExpPerfDataLP14 | read-only | current | The performance data on this OSA for partition 14. The 40 bytes of hex data that are returned are decoded the same as for partition 0. |
| 1.3.6.1.4.1.2.6.188.1.2.1.16 | ColumnibmOSAExpPerfDataLP15 | read-only | current | The performance data on this OSA for partition 15. The 40 bytes of hex data that are returned are decoded the same as for partition 0. |
| 1.3.6.1.4.1.2.6.188.1.3 | TableibmOSAExpPETable | not-accessible | current | This table provides PE information to help IBM diagnose any OSA problems. |
| 1.3.6.1.4.1.2.6.188.1.3.1 | RowibmOSAExpPEEntry | not-accessible | current | Definition of a single entry in the ibmOSAExpPETable. Indexed by the ifIndex of the corresponding Device interface |
| 1.3.6.1.4.1.2.6.188.1.3.1.1 | ColumnibmOSAExpPEMaxSizeArpCache | read-only | current | The maximum size of the OSA ARP Cache |
| 1.3.6.1.4.1.2.6.188.1.3.1.2 | ColumnibmOSAExpPEArpPendingEntries | read-only | current | This is the number of Pending entries in the ARP cache. |
| 1.3.6.1.4.1.2.6.188.1.3.1.3 | ColumnibmOSAExpPEArpActiveEntries | read-only | current | This the number of active ARP entries. |
| 1.3.6.1.4.1.2.6.188.1.3.1.4 | ColumnibmOSAExpPEIPEntries | read-only | current | The number of IP addresses known to the OSA For OSD chpids, this is the maximum # of IP addresses that are: - home ip addresses (Version 4 and Version 6) - rem… |
| 1.3.6.1.4.1.2.6.188.1.3.1.5 | ColumnibmOSAExpPEMulticastEntries | read-only | current | This is the number of IP multicast addresses currently on the OSA |
| 1.3.6.1.4.1.2.6.188.1.3.1.6 | ColumnibmOSAExpPEMulticastData | read-only | current | This contains information on the multicast entries that are currently on the OSA. These are in a format that is for IBM use only |
| 1.3.6.1.4.1.2.6.188.1.4 | TableibmOSAExpEthPortTable | not-accessible | current | This table represents the data associated with a port on an OSA-Express Gigabit or Fast Ethernet OSA. |
| 1.3.6.1.4.1.2.6.188.1.4.1 | RowibmOSAExpEthPortEntry | not-accessible | current | Definition of a single entry in the ibmOSAExpEthPortTable. Indexed by the ifIndex of the corresponding Device interface. |
| 1.3.6.1.4.1.2.6.188.1.4.1.1 | ColumnibmOsaExpEthPortNumber | read-only | current | The physical port number for this port. |
| 1.3.6.1.4.1.2.6.188.1.4.1.2 | ColumnibmOsaExpEthPortType | read-only | current | The physical port type. |
| 1.3.6.1.4.1.2.6.188.1.4.1.3 | ColumnibmOsaExpEthLanTrafficState | read-only | current | The LAN state value ranges from 0 to 8. A value of 5, disabled is further explained in object ibmOsaExpEthDisabledStatus. |
| 1.3.6.1.4.1.2.6.188.1.4.1.4 | ColumnibmOsaExpEthServiceMode | read-only | current | This object indicates if the processor is in service mode or not. |
| 1.3.6.1.4.1.2.6.188.1.4.1.5 | ColumnibmOsaExpEthDisabledStatus | read-only | current | When the value of ibmOsaExpEthLanTrafficState is NOT disabled, the value of this object will be zero. When the value of ibmOsaExpEthLanTrafficState is disabled… |
| 1.3.6.1.4.1.2.6.188.1.4.1.6 | ColumnibmOsaExpEthConfigName | read-only | current | This is the name of the configuration that is on the OSA. It is set using OSA/SF. It is not used by OSA |
| 1.3.6.1.4.1.2.6.188.1.4.1.7 | ColumnibmOsaExpEthConfigSpeedMode | read-only | current | The configured port speed. This field shows the speed that was configured by the user for the OSA-Express Fast Ethernet feature. It is not used by OSA-Express … |
| 1.3.6.1.4.1.2.6.188.1.4.1.8 | ColumnibmOsaExpEthActiveSpeedMode | read-only | current | The actual speed and mode the OSA is running in |
| 1.3.6.1.4.1.2.6.188.1.4.1.9 | ColumnibmOsaExpEthMacAddrActive | read-only | current | A 6 byte OCTET STRING which contains the current MAC address in use on the adapter. The values are in canonical format. |
| 1.3.6.1.4.1.2.6.188.1.4.1.10 | ColumnibmOsaExpEthMacAddrBurntIn | read-only | current | A 6 byte OCTET STRING which contains the burned in MAC address on the OSA. The values are in canonical format. |
| 1.3.6.1.4.1.2.6.188.1.4.1.11 | ColumnibmOsaExpEthUserData | read-only | current | Data set by the user. It is ignored by the OSA. |
| 1.3.6.1.4.1.2.6.188.1.4.1.12 | ColumnibmOsaExpEthOutPackets | read-only | current | This is the number of packets that have been transmitted by the OSA since the last time the OSA port was reset |
| 1.3.6.1.4.1.2.6.188.1.4.1.13 | ColumnibmOsaExpEthInPackets | read-only | current | This is the number of packets that have been received by the OSA since the last time the OSA port was reset |
| 1.3.6.1.4.1.2.6.188.1.4.1.14 | ColumnibmOsaExpEthInGroupFrames | read-only | current | This is the number of multicast frames that have been received by the OSA. |
| 1.3.6.1.4.1.2.6.188.1.4.1.15 | ColumnibmOsaExpEthInBroadcastFrames | read-only | current | This is the number of broadcast frames that have been received by the OSA. |
| 1.3.6.1.4.1.2.6.188.1.4.1.16 | ColumnibmOsaExpEthPortName | read-only | current | Name of the port as used by TCP/IP |
| 1.3.6.1.4.1.2.6.188.1.4.1.17 | ColumnibmOsaExpEthInUnknownIPFrames | read-only | current | This is the number of non-IP received frames |
| 1.3.6.1.4.1.2.6.188.1.4.1.18 | ColumnibmOsaExpEthGroupAddrTable | read-only | current | This field contains the active Group Addresses. An individual Group Address is 6 bytes long with an additional 2 bytes of padding. There are 32 group addresses. |
| 1.3.6.1.4.1.2.6.188.1.5 | TableibmOSAExpTRPortTable | not-accessible | current | This table represents the data associated with a port on an OSA-Express token ring feature. |
| 1.3.6.1.4.1.2.6.188.1.5.1 | RowibmOSAExpTRPortEntry | not-accessible | current | Definition of a single entry in the ibmOSAExpTRPortTable. Indexed by the ifIndex of the corresponding Device interface. |
| 1.3.6.1.4.1.2.6.188.1.5.1.1 | ColumnibmOsaExpTRPortNumber | read-only | current | The physical port number for this port. |
| 1.3.6.1.4.1.2.6.188.1.5.1.2 | ColumnibmOsaExpTRPortType | read-only | current | The physical port type. |
| 1.3.6.1.4.1.2.6.188.1.5.1.3 | ColumnibmOsaExpTRLanTrafficState | read-only | current | The LAN state value ranges from 0 to 8. A value of 5, disabled is further explained in object ibmOsaExpTRDisabledStatus |
| 1.3.6.1.4.1.2.6.188.1.5.1.4 | ColumnibmOsaExpTRServiceMode | read-only | current | This object indicates if the processor is in service mode or not. |
| 1.3.6.1.4.1.2.6.188.1.5.1.5 | ColumnibmOsaExpTRDisabledStatus | read-only | current | When the value of ibmOsaExpTRLanTrafficState is NOT disabled, the value of this object will be zero. When the value of ibmOsaExpTRLanTrafficState is disabled(5… |
| 1.3.6.1.4.1.2.6.188.1.5.1.6 | ColumnibmOsaExpTRConfigName | read-only | current | This is the name of the configuration that is on the OSA. It is set using OSA/SF. It is not used by OSA |
| 1.3.6.1.4.1.2.6.188.1.5.1.7 | ColumnibmOsaExpTRMacAddrActive | read-only | current | A 6 byte OCTET STRING which contains the current MAC address in use on the OSA. |
| 1.3.6.1.4.1.2.6.188.1.5.1.8 | ColumnibmOsaExpTRMacAddrBurntIn | read-only | current | A 6 byte OCTET STRING which contains the burned in MAC address on the OSA |
| 1.3.6.1.4.1.2.6.188.1.5.1.9 | ColumnibmOsaExpTRConfigSpeedMode | read-only | current | The configured port speed. This field shows the speed that was configured by the user for the OSA-Express Token Ring feature. |
| 1.3.6.1.4.1.2.6.188.1.5.1.10 | ColumnibmOsaExpTRActiveSpeedMode | read-only | current | The actual speed and mode the OSA is running in |
| 1.3.6.1.4.1.2.6.188.1.5.1.11 | ColumnibmOsaExpTRUserData | read-only | current | Data set by the user. It is ignored by the OSA. |
| 1.3.6.1.4.1.2.6.188.1.5.1.12 | ColumnibmOsaExpTRPortName | read-only | current | Name of the port as used by TCP/IP |
| 1.3.6.1.4.1.2.6.188.1.5.1.13 | ColumnibmOsaExpTRGroupAddrTable | read-only | current | This field contains the active Group Addresses. An individual Group Address is 6 bytes long with an additional 2 bytes of padding. |
| 1.3.6.1.4.1.2.6.188.1.5.1.14 | ColumnibmOsaExpTRFunctionalAddr | read-only | current | A 4 byte OCTET STRING which contains the OSA-Express's functional address. |
| 1.3.6.1.4.1.2.6.188.1.5.1.15 | ColumnibmOsaExpTRRingStatus | read-only | current | The current interface status which can be used to diagnose fluctuating problems that can occur on token rings after a station has successfully been added to th… |
| 1.3.6.1.4.1.2.6.188.1.5.1.16 | ColumnibmOsaExpTRAllowAccessPriority | read-only | current | This field contains the maximum token priority the ring station defined by this entry in the table is permitted to transmit. |
| 1.3.6.1.4.1.2.6.188.1.5.1.17 | ColumnibmOsaExpTREarlyTokenRelease | read-only | current | Indicates if the ring station supports early token release. Only valid when port is running in 16Mb half duplex mode. Otherwise it is always set to false (1) |
| 1.3.6.1.4.1.2.6.188.1.5.1.18 | ColumnibmOsaExpTRBeaconingAddress | read-only | current | This field contains the node address of the NAUN as reported in the most recently received Beacon MAC frame. This field is valid when ibmOsaExpTRRingOpenStatus… |
| 1.3.6.1.4.1.2.6.188.1.5.1.19 | ColumnibmOsaExpTRUpstreamNeighbor | read-only | current | The MAC-address of the up stream neighbor station in the ring (NAUN). |
| 1.3.6.1.4.1.2.6.188.1.5.1.20 | ColumnibmOsaExpTRRingState | read-only | current | The current interface state with respect to entering or leaving the ring. |
| 1.3.6.1.4.1.2.6.188.1.5.1.21 | ColumnibmOsaExpTRRingOpenStatus | read-only | current | This object indicates the success, or the reason for failure of the station's most recent attempt to enter the ring. |
| 1.3.6.1.4.1.2.6.188.1.5.1.22 | ColumnibmOsaExpTRPacketsTransmitted | read-only | current | This field contains the count of the total number of packets transmitted from this port since the OSA port was reset |
| 1.3.6.1.4.1.2.6.188.1.5.1.23 | ColumnibmOsaExpTRPacketsReceived | read-only | current | This field contains the count of the total number of packets received by this port since the OSA port was reset |
| 1.3.6.1.4.1.2.6.188.1.5.1.24 | ColumnibmOsaExpTRLineErrorCount | read-only | current | This counter is incremented when a frame or token is copied or repeated by a station, the E bit is zero in the frame or token and one of the following conditio… |
| 1.3.6.1.4.1.2.6.188.1.5.1.25 | ColumnibmOsaExpTRBurstErrorCount | read-only | current | This counter is incremented when a station detects the absence of transitions for five half-bit timers (burst-five error). |
| 1.3.6.1.4.1.2.6.188.1.5.1.26 | ColumnibmOsaExpTRACErrorCount | read-only | current | This counter is incremented when a station receives an AMP or SMP frame in which A is equal to C is equal to 0, and then receives another SMP frame with A is e… |
| 1.3.6.1.4.1.2.6.188.1.5.1.27 | ColumnibmOsaExpTRAbortTransErrorCount | read-only | current | This counter is incremented when a station transmits an abort delimiter while transmitting. |
| 1.3.6.1.4.1.2.6.188.1.5.1.28 | ColumnibmOsaExpTRInternalErrorCount | read-only | current | This counter is incremented when a station recognizes an internal error. |
| 1.3.6.1.4.1.2.6.188.1.5.1.29 | ColumnibmOsaExpTRLostFrameErrorCount | read-only | current | This counter is incremented when a station is transmitting and its TRR timer expires. This condition denotes a condition transmitting station in strip mode doe… |
| 1.3.6.1.4.1.2.6.188.1.5.1.30 | ColumnibmOsaExpTRRcvCongestionCount | read-only | current | This counter is incremented when a station recognizes a frame addressed to its specific address, but has no available buffer space indicating that the station … |
| 1.3.6.1.4.1.2.6.188.1.5.1.31 | ColumnibmOsaExpTRFrameCopyErrorCount | read-only | current | This counter is incremented when a station recognizes a frame addressed to its specific address and detects that the FS field A bits are set to 1 indicating a … |
| 1.3.6.1.4.1.2.6.188.1.5.1.32 | ColumnibmOsaExpTRTokenErrorCount | read-only | current | This counter is incremented when a station acting as the active monitor recognizes an error condition that needs a token transmitted. |
| 1.3.6.1.4.1.2.6.188.1.5.1.33 | ColumnibmOsaExpTRFullDuplexErrorCount | read-only | current | An error has been detected by the FDX protocol |
| 1.3.6.1.4.1.2.6.188.1.5.1.34 | ColumnibmOsaExpTRSoftErrorCount | read-only | current | The number of Soft Errors the interface has detected. It directly corresponds to the number of Report Error MAC frames that this interface has transmitted. Sof… |
| 1.3.6.1.4.1.2.6.188.1.5.1.35 | ColumnibmOsaExpTRHardErrorCount | read-only | current | The number of times this interface has detected an immediately recoverable fatal error. It denotes the number of times this interface is either transmitting or… |
| 1.3.6.1.4.1.2.6.188.1.5.1.36 | ColumnibmOsaExpTRSignalLossErrorCount | read-only | current | The number of times this interface has detected the loss of signal condition from the ring. |
| 1.3.6.1.4.1.2.6.188.1.5.1.37 | ColumnibmOsaExpTRTransmitBeaconCount | read-only | current | The number of times this interface has transmitted a beacon frame. |
| 1.3.6.1.4.1.2.6.188.1.5.1.38 | ColumnibmOsaExpTRRecoveryCounter | read-only | current | The number of Claim Token MAC frames received or transmitted after the interface has received a frame Ring Ring Purge MAC counter signifies the number of times… |
| 1.3.6.1.4.1.2.6.188.1.5.1.39 | ColumnibmOsaExpTRLobeWireFaultCount | read-only | current | The number of times the interface has detected an open or short circuit in the lobe data path. The adapter will be closed and ibmOsaExpTRRingState will signify… |
| 1.3.6.1.4.1.2.6.188.1.5.1.40 | ColumnibmOsaExpTRRemoveReceivedCount | read-only | current | The number of times the interface has received a Remove Ring Station MAC frame request. When this frame is received the interface will enter the closed state a… |
| 1.3.6.1.4.1.2.6.188.1.5.1.41 | ColumnibmOsaExpTRSingleStationCount | read-only | current | The number of times the interface has sensed that it is the only station on the ring. This will happen if the interface is the first one up on a ring, or if th… |
| 1.3.6.1.4.1.2.6.188.1.7 | TableibmOSAExpATMPortTable | not-accessible | current | This table represents the data associated with an emulated Ethernet port on an OSA-Express ATM feature. There are a maximum of 2 logical ports on each ATM feat… |
| 1.3.6.1.4.1.2.6.188.1.7.1 | RowibmOSAExpATMPortEntry | not-accessible | current | Definition of a single entry in the ibmOSAExpATMPortTable. Indexed by the ifIndex of the corresponding Device interface. |
| 1.3.6.1.4.1.2.6.188.1.7.1.1 | ColumnibmOsaExpATMPortNumber | read-only | current | The logical port number of this port |
| 1.3.6.1.4.1.2.6.188.1.7.1.2 | ColumnibmOsaExpATMPortType | read-only | current | The logical port type. |
| 1.3.6.1.4.1.2.6.188.1.7.1.3 | ColumnibmOsaExpATMLanTrafficState | read-only | current | The LAN state value ranges from 0 to 8. A value of 5, disabled is further explained in object ibmOsaExpATMDisabledStatus. |
| 1.3.6.1.4.1.2.6.188.1.7.1.4 | ColumnibmOsaExpATMServiceMode | read-only | current | This object indicates if the processor is in service mode or not. |
| 1.3.6.1.4.1.2.6.188.1.7.1.5 | ColumnibmOsaExpATMDisabledStatus | read-only | current | When the value of ibmOsaExpATMLanTrafficState is NOT disabled, the value of this object will be zero. When the value of ibmOsaExpATMLanTrafficState is disabled… |
| 1.3.6.1.4.1.2.6.188.1.7.1.6 | ColumnibmOsaExpATMConfigName | read-only | current | This is the name of the configuration that is on the OSA. It is set using OSA/SF. It is not used by OSA |
| 1.3.6.1.4.1.2.6.188.1.7.1.7 | ColumnibmOsaExpATMMacAddrActive | read-only | current | A 6 byte OCTET STRING which contains the current MAC address in use on the OSA. The values are in canonical format. |
| 1.3.6.1.4.1.2.6.188.1.7.1.8 | ColumnibmOsaExpATMMacAddrBurntIn | read-only | current | A 6 byte OCTET STRING which contains the burned in MAC address on the OSA. The values are in canonical format. |
| 1.3.6.1.4.1.2.6.188.1.7.1.9 | ColumnibmOsaExpATMUserData | read-only | current | Data set by the user. It is ignored by the OSA. |
| 1.3.6.1.4.1.2.6.188.1.7.1.12 | ColumnibmOsaExpATMPortName | read-only | current | Name of the port as used by TCP/IP |
| 1.3.6.1.4.1.2.6.188.1.7.1.13 | ColumnibmOsaExpATMGroupMacAddrTable | read-only | current | This field contains the active Group Addresses. An individual Group Address is 6 bytes long with an additional 2 bytes of padding. |
| 1.3.6.1.4.1.2.6.188.1.7.1.14 | ColumnibmOsaExpATMIBMEnhancedMode | read-only | current | When set to Yes, this keeps data connections active when the connection to the LES is lost. |
| 1.3.6.1.4.1.2.6.188.1.7.1.15 | ColumnibmOsaExpATMBestEffortPeakRate | read-only | current | Values range from 10-1550 and must be divided by 10 to get the proper value. A value of 1550 indicates 155.0 Mbytes/sec |
| 1.3.6.1.4.1.2.6.188.1.7.1.16 | ColumnibmOsaExpATMConfigMode | read-only | current | Indicates whether this LAN Emulation Client should auto-configure the next time it is (re)started. In automatic (1) mode, a client uses a LAN Emulation Configu… |
| 1.3.6.1.4.1.2.6.188.1.7.1.17 | ColumnibmOsaExpATMConfigLanType | read-only | current | The logical port type that the user configured the port for |
| 1.3.6.1.4.1.2.6.188.1.7.1.18 | ColumnibmOsaExpATMActualLanType | read-only | current | The actual logical port type the port is running in |
| 1.3.6.1.4.1.2.6.188.1.7.1.19 | ColumnibmOsaExpATMConfigMaxDataFrmSz | read-only | current | The maximum data frame size (in bytes) which this client will use the next time it returns to the Initial State. Auto-configuring clients use this parameter in… |
| 1.3.6.1.4.1.2.6.188.1.7.1.20 | ColumnibmOsaExpATMActualMaxDataFrmSz | read-only | current | The maximum data frame size (in bytes) which this client will use the next time it returns to the Initial State. Auto-configuring clients use this parameter in… |
| 1.3.6.1.4.1.2.6.188.1.7.1.21 | ColumnibmOsaExpATMConfigELANName | read-only | current | The ELAN Name this client will use the next time it returns to the Initial State. Auto-configuring clients use this parameter in their configure requests. Manu… |
| 1.3.6.1.4.1.2.6.188.1.7.1.22 | ColumnibmOsaExpATMActualELANName | read-only | current | The ELAN Name this client will use the next time it returns to the Initial State. Auto-configuring clients use this parameter in their configure requests. Manu… |
| 1.3.6.1.4.1.2.6.188.1.7.1.23 | ColumnibmOsaExpATMConfigLESATMAddress | read-only | current | The LAN Emulation Server which this client will use the next time it is started in manual configuration mode. When ibmOsaExpATMConfigMode is 'automatic', there… |
| 1.3.6.1.4.1.2.6.188.1.7.1.24 | ColumnibmOsaExpATMActualLESATMAddress | read-only | current | The LAN Emulation Server which this client will use the next time it is started in manual configuration mode. When lecConfigMode is 'automatic', there is no ne… |
| 1.3.6.1.4.1.2.6.188.1.7.1.25 | ColumnibmOsaExpATMControlTimeout | read-only | current | Control Time-out. Time out period used for timing out most request/response control frame interactions, as specified elsewhere in the LAN Emulation specificati… |
| 1.3.6.1.4.1.2.6.188.1.7.1.26 | ColumnibmOsaExpATMMaxUnknownFrameCount | read-only | current | Maximum Unknown Frame Count. See the description of ibmOsaExpATMMaxUnknownFrameTime below. Corresponds to Initial State Parameter C10. |
| 1.3.6.1.4.1.2.6.188.1.7.1.27 | ColumnibmOsaExpATMMaxUnknownFrameTime | read-only | current | Maximum Unknown Frame Time. Within the period of time defined by the Maximum Unknown Frame Time, a LE Client will send no more than Maximum Unknown Frame Count… |
| 1.3.6.1.4.1.2.6.188.1.7.1.28 | ColumnibmOsaExpATMVCCTimeoutPeriod | read-only | current | VCC Time-out Period. A LE Client SHOULD release any Data Direct VCC that it has not used to transmit or receive any data frames for the length of the VCC Time-… |
| 1.3.6.1.4.1.2.6.188.1.7.1.29 | ColumnibmOsaExpATMMaxRetryCount | read-only | current | Maximum Retry Count. A LE CLient MUST not retry a LE_ARP_REQUEST for a given frame's LAN destination more than Maximum Retry Count times, after the first LE_AR… |
| 1.3.6.1.4.1.2.6.188.1.7.1.30 | ColumnibmOsaExpATMAgingTime | read-only | current | Aging Time. The maximum time that a LE Client will maintain an entry in its LE_ARP cache in the absence of a verification of that relationship. This time value… |
| 1.3.6.1.4.1.2.6.188.1.7.1.31 | ColumnibmOsaExpATMForwardDelayTime | read-only | current | Forward Delay Time. The maximum time that a LE Client will maintain an entry for a non-local MAC address in its LE_ARP cache in the absence of a verification o… |
| 1.3.6.1.4.1.2.6.188.1.7.1.32 | ColumnibmOsaExpATMExpectedARPRespTime | read-only | current | Expected LE_ARP Reponse Time. The maximum time that the LEC expects an LE_ARP_REQUEST/LE_ARP_RESPONSE cycle to take. Used for retries and verifies. This time v… |
| 1.3.6.1.4.1.2.6.188.1.7.1.33 | ColumnibmOsaExpATMFlushTimeout | read-only | current | Flush Time-out. Time limit to wait to receive a LE_FLUSH_RESPONSE after the LE_FLUSH_REQUEST has been sent before taking recovery action. This time value is ex… |
| 1.3.6.1.4.1.2.6.188.1.7.1.34 | ColumnibmOsaExpATMPathSwitchingDelay | read-only | current | Path Switching Delay. The time since sending a frame to the BUS after which the LE Client may assume that the frame has been either discarded or delivered to t… |
| 1.3.6.1.4.1.2.6.188.1.7.1.35 | ColumnibmOsaExpATMLocalSegmentID | read-only | current | Local Segment ID. The segment ID of the emulated LAN. This is only required for IEEE 802.5 clients that are Source Routing bridges. Corresponds to Initial Stat… |
| 1.3.6.1.4.1.2.6.188.1.7.1.36 | ColumnibmOsaExpATMMltcstSendVCCType | read-only | current | Multicast Send VCC Type. Signalling parameter that SHOULD be used by the LE Client when establishing the Multicast Send VCC. This is the method to be used by t… |
| 1.3.6.1.4.1.2.6.188.1.7.1.37 | ColumnibmOsaExpATMMltcstSendVCCAvgRate | read-only | current | Multicast Send VCC AvgRate. Signalling parameter that SHOULD be used by the LE Client when estabishing the Multicast Send VCC. Forward and Backward Sustained C… |
| 1.3.6.1.4.1.2.6.188.1.7.1.38 | ColumnibmOsaExpATMMcastSendVCCPeakRate | read-only | current | Multicast Send VCC PeakRate. Signalling parameter that SHOULD be used by the LE Client when establishing the Multicast Send VCC. Forward and Backward Peak Cell… |
| 1.3.6.1.4.1.2.6.188.1.7.1.39 | ColumnibmOsaExpATMConnectCompleteTimer | read-only | current | Connection Complete Timer. Optional. In Connection Establish ment this is the time period in which data or a READY_IND message is expected from a Calling Party… |
| 1.3.6.1.4.1.2.6.188.1.7.1.40 | ColumnibmOsaExpATMClientATMAddress | read-only | current | LE Client's ATM Addresses. The primary ATM address of this LAN Emulation Client. This address is used to establish the Control Direct and Multicast Send VCCs, … |
| 1.3.6.1.4.1.2.6.188.1.7.1.41 | ColumnibmOsaExpATMClientIdentifier | read-only | current | LE Client Identifier. Each LE Client requires a LE Client Identifier (LECID) assigned by the LE Server during the Join phase. The LECID is placed in control re… |
| 1.3.6.1.4.1.2.6.188.1.7.1.42 | ColumnibmOsaExpATMClientCurrentState | read-only | current | The current state of the LAN Emulation Client. Note that 'ifOperStatus' is defined to be 'up' when, and only when, this field is 'operational'. |
| 1.3.6.1.4.1.2.6.188.1.7.1.43 | ColumnibmOsaExpATMLastFailureRespCode | read-only | current | Status code from the last failed Configure response or Join response. Failed responses are those for which the LE_CONFIGURE_RESPONSE / LE_JOIN_RESPONSE frame c… |
| 1.3.6.1.4.1.2.6.188.1.7.1.44 | ColumnibmOsaExpATMLastFailureState | read-only | current | The state this client was in when it updated the 'ibmOsaExpATMLastFailureRespCode'. If 'ibmOsaExpATMLastFailureRespCode' is 'none', this object has the value i… |
| 1.3.6.1.4.1.2.6.188.1.7.1.45 | ColumnibmOsaExpATMProtocol | read-only | current | The LAN Emulation protocol which this client supports, and specifies in its LE_JOIN_REQUESTs. |
| 1.3.6.1.4.1.2.6.188.1.7.1.46 | ColumnibmOsaExpATMLeVersion | read-only | current | The LAN Emulation protocol version which this client supports, and specifies in its LE_JOIN_REQUESTs. |
| 1.3.6.1.4.1.2.6.188.1.7.1.47 | ColumnibmOsaExpATMTopologyChange | read-only | current | Topology Change. Boolean indication that the LE Client is using the Forward Delay Time C18, instead of the Aging Time C17, to age non-local entries in its LE_A… |
| 1.3.6.1.4.1.2.6.188.1.7.1.48 | ColumnibmOsaExpATMConfigServerATMAddr | read-only | current | The ATM address of the LAN Emulation Configuration Server (if known) or 0 (otherwise). In LAN Emulation MIB, the OCTET STRING is either 0 length or 20 octets. … |
| 1.3.6.1.4.1.2.6.188.1.7.1.49 | ColumnibmOsaExpATMConfigSource | read-only | current | Indicates whether this LAN Emulation Client used the LAN Emulation Configuration Server, and, if so, what method it used to establish the Configuration Direct … |
| 1.3.6.1.4.1.2.6.188.1.7.1.50 | ColumnibmOsaExpATMProxyClient | read-only | current | Indicates whether this client is acting as a proxy. Proxy clients are allowed to represent unregistered MAC addresses, and receive copies of LE_ARP_REQUEST fra… |
| 1.3.6.1.4.1.2.6.188.1.7.1.51 | ColumnibmOsaExpATMLePDUOctetsInbound | read-only | current | The number of Le PDU Octets received |
| 1.3.6.1.4.1.2.6.188.1.7.1.52 | ColumnibmOsaExpATMNonErrLePDUDiscIn | read-only | current | The number of Non Error Le PDU Octets received |
| 1.3.6.1.4.1.2.6.188.1.7.1.53 | ColumnibmOsaExpATMErrLePDUDiscIn | read-only | current | The number of Errored Le PDU Discards received |
| 1.3.6.1.4.1.2.6.188.1.7.1.54 | ColumnibmOsaExpATMLePDUOctetsOutbound | read-only | current | The number of Le PDU Discards sent |
| 1.3.6.1.4.1.2.6.188.1.7.1.55 | ColumnibmOsaExpATMNonErrLePDUDiscOut | read-only | current | The number of Non Error Le PDU Discards sent |
| 1.3.6.1.4.1.2.6.188.1.7.1.56 | ColumnibmOsaExpATMErrLePDUDiscOut | read-only | current | The number of Errored Le PDU Discards sent |
| 1.3.6.1.4.1.2.6.188.1.7.1.57 | ColumnibmOsaExpATMLeARPRequestsOut | read-only | current | The number of LE ARP Requests sent |
| 1.3.6.1.4.1.2.6.188.1.7.1.58 | ColumnibmOsaExpATMLeARPRequestsIn | read-only | current | The number of LE ARP Requests received over the LUNI by this LAN Emulation Client. Requests may arrive on the Control Direct VCC or on the Control Distribute V… |
| 1.3.6.1.4.1.2.6.188.1.7.1.59 | ColumnibmOsaExpATMLeARPRepliesOut | read-only | current | The number of LE ARP Responses sent over the LUNI by this LAN Emulation Client. |
| 1.3.6.1.4.1.2.6.188.1.7.1.60 | ColumnibmOsaExpATMLeARPRepliesIn | read-only | current | The number of LE ARP Responses received over the LUNI by this LAN Emulation Client. This count includes all such replies, whether solicited or not. Replies may… |
| 1.3.6.1.4.1.2.6.188.1.7.1.61 | ColumnibmOsaExpATMControlFramesOut | read-only | current | The total number of control packets sent by this LAN Emulation Client over the LUNI. |
| 1.3.6.1.4.1.2.6.188.1.7.1.62 | ColumnibmOsaExpATMControlFramesIn | read-only | current | The total number of control packets received by this LAN Emulation Client over the LUNI. |
| 1.3.6.1.4.1.2.6.188.1.7.1.63 | ColumnibmOsaExpATMSVCFailures | read-only | current | The total number of outgoing LAN Emulation SVCs which this client tried, but failed, to open; incoming LAN Emulation SVCs which this client tried, but failed t… |
| 1.3.6.1.4.1.2.6.188.1.7.1.64 | ColumnibmOsaExpATMConfigDirectIntfc | read-only | current | The interface associated with the Configuration Direct VCC. If no Configuration Direct VCC exists, this object has the value 0. Otherwise, the objects ( ibmOsa… |
| 1.3.6.1.4.1.2.6.188.1.7.1.65 | ColumnibmOsaExpATMConfigDirectVPI | read-only | current | If the Configuration Direct VCC exists, this object contains the VPI which identifies that VCC at the point where it connects to this LE client. Otherwise, thi… |
| 1.3.6.1.4.1.2.6.188.1.7.1.66 | ColumnibmOsaExpATMConfigDirectVCI | read-only | current | If the Configuration Direct VCC exists, this object contains the VCI which identifies that VCC at the point where it connects to this LE client. Otherwise, thi… |
| 1.3.6.1.4.1.2.6.188.1.7.1.67 | ColumnibmOsaExpATMControlDirectIntfc | read-only | current | The interface associated with the Control Direct VCC. If no Control Direct VCC exists, this object has the value 0. Otherwise, the objects ( ibmOsaExpATMConfig… |
| 1.3.6.1.4.1.2.6.188.1.7.1.68 | ColumnibmOsaExpATMControlDirectVPI | read-only | current | If the Control Direct VCC exists, this object contains the VPI which identifies that VCC at the point where it connects to this LE client. Otherwise, this obje… |
| 1.3.6.1.4.1.2.6.188.1.7.1.69 | ColumnibmOsaExpATMControlDirectVCI | read-only | current | If the Control Direct VCC exists, this object contains the VCI which identifies that VCC at the point where it connects to this LE client. Otherwise, this obje… |
| 1.3.6.1.4.1.2.6.188.1.7.1.70 | ColumnibmOsaExpATMControlDistIntfc | read-only | current | The interface associated with the Control Distribute VCC. If no Control Distribute VCC has been set up to this client, this object has the value 0. Otherwise, … |
| 1.3.6.1.4.1.2.6.188.1.7.1.71 | ColumnibmOsaExpATMControlDistributeVPI | read-only | current | If the Control Distribute VCC exists, this object contains the VPI which identifies that VCC at the point where it connects to this LE client. Otherwise, this … |
| 1.3.6.1.4.1.2.6.188.1.7.1.72 | ColumnibmOsaExpATMControlDistributeVCI | read-only | current | If the Control Distribute VCC exists, this object contains the VCI which identifies that VCC at the point where it connects to this LE client. Otherwise, this … |
| 1.3.6.1.4.1.2.6.188.1.7.1.73 | ColumnibmOsaExpATMMulticastSendIntfc | read-only | current | The interface associated with the Multicast Send VCC. If no Multicast Send VCC exists, this object has the value 0. Otherwise, the objects ( ibmOsaExpATMMultic… |
| 1.3.6.1.4.1.2.6.188.1.7.1.74 | ColumnibmOsaExpATMMulticastSendVPI | read-only | current | If the Multicast Send VCC exists, this object contains the VPI which identifies that VCC at the point where it connects to this LE client. Otherwise, this obje… |
| 1.3.6.1.4.1.2.6.188.1.7.1.75 | ColumnibmOsaExpATMMulticastSendVCI | read-only | current | If the Multicast Send VCC exists, this object contains the VCI which identifies that VCC at the point where it connects to this LE client. Otherwise, this obje… |
| 1.3.6.1.4.1.2.6.188.1.7.1.76 | ColumnibmOsaExpATMMulticastFwdIntfc | read-only | current | The interface associated with the Multicast Forward VCC. If no Multicast Forward VCC has been set up to this client, this object has the value 0. Otherwise, th… |
| 1.3.6.1.4.1.2.6.188.1.7.1.77 | ColumnibmOsaExpATMMulticastForwardVPI | read-only | current | If the Multicast Forward VCC exists, this object contains the VPI which identifies that VCC at the point where it connects to this LE client. Otherwise, this o… |
| 1.3.6.1.4.1.2.6.188.1.7.1.78 | ColumnibmOsaExpATMMulticastForwardVCI | read-only | current | If the Multicast Forward VCC exists, this object contains the VCI which identifies that VCC at the point where it connects to this LE client. Otherwise, this o… |
| 1.3.6.1.4.1.2.6.188.2 | NodeibmOSAMibConformance | |||
| 1.3.6.1.4.1.2.6.188.2.1 | NodeibmOSAMibCompliances | |||
| 1.3.6.1.4.1.2.6.188.2.1.1 | ComplianceibmOSAMibCompliance | current | The compliance statement for the OSA DIrect SNMP product. | |
| 1.3.6.1.4.1.2.6.188.2.2 | NodeibmOSAMibGroups | |||
| 1.3.6.1.4.1.2.6.188.2.2.1 | GroupibmOSAExpChannelGroup | current | This group comprises those objects that are related to OSA-Express Channel support. | |
| 1.3.6.1.4.1.2.6.188.2.2.2 | GroupibmOSAExpPerfGroup | current | This group comprises those objects that are related to OSA-Express Performance data support. | |
| 1.3.6.1.4.1.2.6.188.2.2.3 | GroupibmOSAExpPEGroup | current | This group comprises those objects that are related to OSA-Express PE data support. | |
| 1.3.6.1.4.1.2.6.188.2.2.4 | GroupibmOSAExpEthGroup | current | This group comprises those objects that are related to OSA-Express Fast Ethernet and Gigabit features only | |
| 1.3.6.1.4.1.2.6.188.2.2.5 | GroupibmOSAExpTRGroup | current | This group comprises those objects that are related to OSA-Express Token Ring feature only | |
| 1.3.6.1.4.1.2.6.188.2.2.7 | GroupibmOSAExpATMGroup | current | This group comprises those objects that are related to OSA-Express ATM LAN Emulation feature only |