IBM6611-MIB
1634 objects
No module-level DESCRIPTION found.
Imported Objects
| RFC-1212 | OBJECT-TYPE |
| RFC1155-SMI | Counter enterprises Gauge IpAddress TimeTicks |
| RFC1158-MIB | DisplayString |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2 | Nodeibm | |||
| 1.3.6.1.4.1.2.6 | NodeibmProd | |||
| 1.3.6.1.4.1.2.6.2 | Nodeibm6611 | |||
| 1.3.6.1.4.1.2.6.2.1 | NodeibmSubagents | |||
| 1.3.6.1.4.1.2.6.2.2 | NodeibmChipSets | |||
| 1.3.6.1.4.1.2.6.2.2.1 | NodeibmChipSetIntel | |||
| 1.3.6.1.4.1.2.6.2.2.1.1 | NodeibmChipSetIntel82596B | |||
| 1.3.6.1.4.1.2.6.2.2.2 | NodeibmChipSetIBM | |||
| 1.3.6.1.4.1.2.6.2.2.2.1 | NodeibmChipSetIBM8025A | |||
| 1.3.6.1.4.1.2.6.2.2.2.2 | NodeibmChipSetIBM8025B | |||
| 1.3.6.1.4.1.2.6.2.2.3 | NodeibmChipSetSignetics | |||
| 1.3.6.1.4.1.2.6.2.2.3.1 | NodeibmChipSetSigneticsSCN68562 | |||
| 1.3.6.1.4.1.2.6.2.3 | NodeibmDSUs | |||
| 1.3.6.1.4.1.2.6.2.3.1 | Nodecylink | |||
| 1.3.6.1.4.1.2.6.2.3.1.1 | TablecylinkStatusTable | not-accessible | mandatory | The cylink Status table. This table contains information about the current state of the Cylink CSUs attached to the system. |
| 1.3.6.1.4.1.2.6.2.3.1.1.1 | RowcylinkStatusEntry | not-accessible | mandatory | An entry in the cylink Status table. |
| 1.3.6.1.4.1.2.6.2.3.1.1.1.1 | ColumncylinkIndex | read-only | mandatory | An index value that uniquely identifies a cylink system interface. The interface identified by a particular value of this index is the same interface as identi… |
| 1.3.6.1.4.1.2.6.2.3.1.1.1.2 | ColumncylinkLinkState | read-only | mandatory | The current state of the link. The meanings of the values are: cylinkNotConnected(1) The link is not physically connected to the CSU. This may be due to loss o… |
| 1.3.6.1.4.1.2.6.2.3.1.1.1.3 | ColumncylinkLoopback | read-only | mandatory | The loopback mode of the link. The meaning of values are: cylinkNoLoopback(1) The link is not in loopback mode. cylinkNearEndLoopback(2) The link has been plac… |
| 1.3.6.1.4.1.2.6.2.3.1.1.1.4 | ColumncylinkQRSS | read-only | mandatory | The Quasi-Random Signal Sequence test mode of the CSU. The value of the meanings are: cylinkNoQRSS(1) The CSU is not in QRSS mode. cylinkQRSSMaster(2) The CSU … |
| 1.3.6.1.4.1.2.6.2.3.1.3 | TablecylinkConfigTable | not-accessible | mandatory | The cylink Configuration table. This table contains information about the configuration of the Cylink CSUs attached to the system. |
| 1.3.6.1.4.1.2.6.2.3.1.3.1 | RowcylinkConfigEntry | not-accessible | mandatory | An entry in the cylink Configuration table. |
| 1.3.6.1.4.1.2.6.2.3.1.3.1.1 | ColumncylinkConfigIndex | read-only | mandatory | The index value which uniquely identifies the CSU to which this entry is applicable. The CSU identified by a particular value of this index is the same CSU as … |
| 1.3.6.1.4.1.2.6.2.3.1.3.1.2 | ColumncylinkSerialNumber | read-only | mandatory | The manufacturer's serial number of this CSU. |
| 1.3.6.1.4.1.2.6.2.3.1.3.1.3 | ColumncylinkSoftwareVersion | read-only | mandatory | The version number of the microcode running in the CSU. |
| 1.3.6.1.4.1.2.6.2.3.1.3.1.4 | ColumncylinkDTEFraming | read-only | mandatory | The DTE framing selected (D4, or ESF). Framing conversion is automatically performed at both ends if the DTE is D4 framed and the network interface is ESF fram… |
| 1.3.6.1.4.1.2.6.2.3.1.3.1.5 | ColumncylinkNetworkFraming | read-only | mandatory | The network framing selected (D4, or ESF). Framing conversion is automatically performed at both ends if the DTE is D4 framed and the network interface is ESF … |
| 1.3.6.1.4.1.2.6.2.3.1.3.1.6 | ColumncylinkDTEDS1Mode | read-only | mandatory | The DTE DS-1 mode selected (B8ZS, or AMI). |
| 1.3.6.1.4.1.2.6.2.3.1.3.1.7 | ColumncylinkNetworkDS1Mode | read-only | mandatory | The network DS-1 mode selected (B8ZS, or AMI). |
| 1.3.6.1.4.1.2.6.2.3.1.3.1.8 | ColumncylinkOnesResponsibility | read-only | mandatory | The component selected for Ones Density Responsibility (DTE, or CSU. |
| 1.3.6.1.4.1.2.6.2.3.1.3.1.9 | ColumncylinkOnesControl | read-only | mandatory | The Ones Density Control selected (LSB 24, D4 FRM, or ESF DL). |
| 1.3.6.1.4.1.2.6.2.3.1.3.1.10 | ColumncylinkZeroProtection | read-only | mandatory | The Consecutive Zero Control selected (15, or 80). This determines the the maximum number of consecutive zeros allowed in the data stream before a one is force… |
| 1.3.6.1.4.1.2.6.2.3.1.3.1.11 | ColumncylinkClockSource | read-only | mandatory | The transmit clock source selected for NRZ DIUs (network, DTE, an external clock, or the CSU's internal clock). |
| 1.3.6.1.4.1.2.6.2.3.1.3.1.12 | ColumncylinkClockFrequency | read-only | mandatory | The external clock frequency selected (56 kHz, 256 kHz, 1.344 MHz, 1.544 MHz). |
| 1.3.6.1.4.1.2.6.2.3.1.3.1.13 | ColumncylinkClockBackup | read-only | mandatory | The transmit clock backup source selected for NRZ DIUs (network, DTE, an external clock, or the CSU's internal clock). |
| 1.3.6.1.4.1.2.6.2.3.1.3.1.14 | ColumncylinkDIUFrequency | read-only | mandatory | The DIU frequency selected for NRZ DIUs (767 kbps, 1.244 Mbps, 1.528 Mbps, 1.536 Mbps). |
| 1.3.6.1.4.1.2.6.2.3.1.3.1.15 | ColumncylinkDIUTiming | read-only | mandatory | The DIU transmit timing selected for NRZ DIUs (Send Timing, or Terminal Timing). |
| 1.3.6.1.4.1.2.6.2.3.1.3.1.16 | ColumncylinkDialoutCapability | read-only | mandatory | The DIU dial-out capability selected (polled, tone, or pulse). |
| 1.3.6.1.4.1.2.6.2.3.1.3.1.17 | ColumncylinkDialoutHoldoff | read-only | mandatory | The mininum time, in minutes, between successful CSU-to-NMS connections to report alarm conditions. |
| 1.3.6.1.4.1.2.6.2.3.1.3.1.18 | ColumncylinkPrimaryPhone | read-only | mandatory | The primary telephone number used by by the CSU to contact the NMS. |
| 1.3.6.1.4.1.2.6.2.3.1.3.1.19 | ColumncylinkSecondaryPhone | read-only | mandatory | The secondary telephone number used by by the CSU to contact the NMS. |
| 1.3.6.1.4.1.2.6.2.3.1.3.1.20 | ColumncylinkAlarmRepeatTime | read-only | mandatory | The interval, in minutes, that the CSU will insert duplicate messages in the alarm queue for persistant alarm conditions. |
| 1.3.6.1.4.1.2.6.2.3.1.3.1.21 | ColumncylinkESThreshold | read-only | mandatory | The threshold, in seconds, for the errored second value in the current 15-minute interval. |
| 1.3.6.1.4.1.2.6.2.3.1.3.1.22 | ColumncylinkSecondaryContact | read-only | mandatory | The state of the CSU secondary contact (open or closed). |
| 1.3.6.1.4.1.2.6.2.4 | Nodeibmsystem | |||
| 1.3.6.1.4.1.2.6.2.4.1 | TableibmMainProcessorLoadTable | not-accessible | mandatory | A table containing the average main processor load over each minute for the last 60 minutes. |
| 1.3.6.1.4.1.2.6.2.4.1.1 | RowibmMainProcessorLoadEntry | not-accessible | mandatory | An entry in the main processor load table. |
| 1.3.6.1.4.1.2.6.2.4.1.1.1 | ColumnibmMainProcessorLoadIndex | read-only | mandatory | Indicates the number of minutes ago that this entry contains main processor load information for. |
| 1.3.6.1.4.1.2.6.2.4.1.1.2 | ColumnibmMainProcessorLoad | read-only | mandatory | The main processor load averaged over one minute. The load is given as a percentage. For example, 25% is 25. |
| 1.3.6.1.4.1.2.6.2.4.2 | Nodeibmswvpd | |||
| 1.3.6.1.4.1.2.6.2.4.2.1 | TableswVpdTable | not-accessible | mandatory | A table containing software vital product data information. |
| 1.3.6.1.4.1.2.6.2.4.2.1.1 | RowswVpdEntry | not-accessible | mandatory | An entry for a piece of software installed on this router. |
| 1.3.6.1.4.1.2.6.2.4.2.1.1.1 | ColumnswvpdIndex | read-only | mandatory | A unique value for each entry in this table. |
| 1.3.6.1.4.1.2.6.2.4.2.1.1.2 | ColumnswvpdName | read-only | mandatory | The name of this software product. |
| 1.3.6.1.4.1.2.6.2.4.2.1.1.3 | ColumnswvpdPtfName | read-only | mandatory | If this entry represents a PTF, this object contains the name of the PTF. Otherwise this object contains a string of zero length. |
| 1.3.6.1.4.1.2.6.2.4.2.1.1.4 | ColumnswvpdVerId | read-only | mandatory | The version identifier for this piece of software. |
| 1.3.6.1.4.1.2.6.2.4.2.1.1.5 | ColumnswvpdRelId | read-only | mandatory | The release identifier for this piece of software. |
| 1.3.6.1.4.1.2.6.2.4.2.1.1.6 | ColumnswvpdModId | read-only | mandatory | The modification level identifier for this piece of software. |
| 1.3.6.1.4.1.2.6.2.4.2.1.1.7 | ColumnswvpdFixId | read-only | mandatory | The fix level identifier for this piece of software. |
| 1.3.6.1.4.1.2.6.2.4.2.1.1.8 | ColumnswvpdState | read-only | mandatory | The state of the action in swvpdAction being performed on this software. |
| 1.3.6.1.4.1.2.6.2.4.2.1.1.9 | ColumnswvpdAction | read-only | mandatory | The action being performed on this software. |
| 1.3.6.1.4.1.2.6.2.4.2.1.1.10 | ColumnswvpdPath | read-only | mandatory | An indication of which part of the system this software is installed on. The values correspond to the following paths: root(1) /etc/objrepos usr(2) /usr/lib/ob… |
| 1.3.6.1.4.1.2.6.2.4.2.1.1.11 | ColumnswvpdDateTime | read-only | mandatory | A string indicating the date and time that the action in swvpdAction was performed on this software. |
| 1.3.6.1.4.1.2.6.2.4.4 | Nodeibmmaint | |||
| 1.3.6.1.4.1.2.6.2.4.4.1 | ScalaribmmaintShutdown | read-write | mandatory | When read, an active 6611 will return the value running(1). To force a shutdown, without a subsequent re-ipl of the 6611, this value should be set to shutdown-… |
| 1.3.6.1.4.1.2.6.2.5 | Nodeibmicmp | |||
| 1.3.6.1.4.1.2.6.2.6 | Nodeibmsnmp | |||
| 1.3.6.1.4.1.2.6.2.6.1 | ScalaribmTrapNum | read-only | mandatory | Number of IBM enterprise specific traps generated by this node. |
| 1.3.6.1.4.1.2.6.2.6.2 | ScalaribmTrapThrottleCount | read-only | mandatory | Number of traps throttled since last trap. |
| 1.3.6.1.4.1.2.6.2.6.3 | ScalaribmTrapThrottleId | read-only | mandatory | Trap ID of throttled traps. All throttled traps counted by ibmTrapThrottleCount have the this ID. |
| 1.3.6.1.4.1.2.6.2.6.4 | ScalaribmTrapThrottleTime | read-only | mandatory | Number of seconds which must separate consecutive enterprise-specific traps with identical ID in order to not throttle them. If the value of this object is 0, … |
| 1.3.6.1.4.1.2.6.2.7 | Nodeibmbridge | |||
| 1.3.6.1.4.1.2.6.2.7.1 | NodeibmbridgeMACAddressFilters | |||
| 1.3.6.1.4.1.2.6.2.7.1.1 | TableibmmacAddrFilterInfoTable | not-accessible | mandatory | Table of MAC address filtering information. |
| 1.3.6.1.4.1.2.6.2.7.1.1.1 | RowibmmacAddrFilterInfoEntry | not-accessible | mandatory | MAC address filtering information for a single interface. |
| 1.3.6.1.4.1.2.6.2.7.1.1.1.1 | ColumnibmmacAddrFilterIfIndex | read-only | mandatory | The value of this object identifies the interface for which this entry contains management information. The value of this object for a particular interface has… |
| 1.3.6.1.4.1.2.6.2.7.1.1.1.2 | ColumnibmmacAddrFilterInBcastType | read-only | mandatory | For the incoming MAC address filter table, determines what type of frames will be filtered. |
| 1.3.6.1.4.1.2.6.2.7.1.1.1.3 | ColumnibmmacAddrFilterOutBcastType | read-only | mandatory | For the outgoing MAC address filter table, determines what type of frames will be filtered. |
| 1.3.6.1.4.1.2.6.2.7.1.1.1.4 | ColumnibmmacAddrFilterInFilterType | read-only | mandatory | For the incoming filter table, determines whether the entries are permit or deny entries. |
| 1.3.6.1.4.1.2.6.2.7.1.1.1.5 | ColumnibmmacAddrFilterOutFilterType | read-only | mandatory | For the outgoing filter table, determines whether the entries are permit or deny entries. |
| 1.3.6.1.4.1.2.6.2.7.1.1.1.6 | ColumnibmmacAddrFilterInNotForwarded | read-only | mandatory | Number of packets not forwarded, in the incoming direction, because they were filtered out. |
| 1.3.6.1.4.1.2.6.2.7.1.1.1.7 | ColumnibmmacAddrFilterOutNotForwarded | read-only | mandatory | Number of packets not forwarded, in the outgoing direction, because they were filtered out. |
| 1.3.6.1.4.1.2.6.2.7.1.1.1.8 | ColumnibmmacAddrFilterType | read-only | mandatory | The type of entry, either sr or tb. |
| 1.3.6.1.4.1.2.6.2.7.1.2 | TableibmmacAddrFilterInTable | not-accessible | mandatory | Table of MAC address filtering information for incoming frames. |
| 1.3.6.1.4.1.2.6.2.7.1.2.1 | RowibmmacAddrFilterInEntry | not-accessible | mandatory | Filtering information for incoming frames. |
| 1.3.6.1.4.1.2.6.2.7.1.2.1.1 | ColumnibmmacAddrFilterInIfIndex | read-only | mandatory | The value of this object identifies the interface for which this entry contains management information. The value of this object for a particular interface has… |
| 1.3.6.1.4.1.2.6.2.7.1.2.1.2 | ColumnibmmacAddrFilterInSrcAddress | read-only | mandatory | MAC source address to be filtered. |
| 1.3.6.1.4.1.2.6.2.7.1.2.1.3 | ColumnibmmacAddrFilterInSrcMask | read-only | mandatory | Mask to allow ibmmacAddrFilterInSrcAddress to be used as a range of values. |
| 1.3.6.1.4.1.2.6.2.7.1.2.1.4 | ColumnibmmacAddrFilterInDestAddress | read-only | mandatory | MAC destination address to be filtered. |
| 1.3.6.1.4.1.2.6.2.7.1.2.1.5 | ColumnibmmacAddrFilterInDestMask | read-only | mandatory | Mask to allow ibmmacAddrFilterInDestAddress to be used as a range of values. |
| 1.3.6.1.4.1.2.6.2.7.1.2.1.6 | ColumnibmmacAddrFilterInType | read-only | mandatory | The type of entry, either sr or tb. |
| 1.3.6.1.4.1.2.6.2.7.1.3 | TableibmmacAddrFilterOutTable | not-accessible | mandatory | Table of MAC address filtering information for outgoing frames. |
| 1.3.6.1.4.1.2.6.2.7.1.3.1 | RowibmmacAddrFilterOutEntry | not-accessible | mandatory | Filtering information for outgoing frames. |
| 1.3.6.1.4.1.2.6.2.7.1.3.1.1 | ColumnibmmacAddrFilterOutIfIndex | read-only | mandatory | The value of this object identifies the interface for which this entry contains management information. The value of this object for a particular interface has… |
| 1.3.6.1.4.1.2.6.2.7.1.3.1.2 | ColumnibmmacAddrFilterOutSrcAddress | read-only | mandatory | MAC source address to be filtered. |
| 1.3.6.1.4.1.2.6.2.7.1.3.1.3 | ColumnibmmacAddrFilterOutSrcMask | read-only | mandatory | Mask to allow ibmmacAddrFilterOutSrcAddress to be used as a range of values. |
| 1.3.6.1.4.1.2.6.2.7.1.3.1.4 | ColumnibmmacAddrFilterOutDestAddress | read-only | mandatory | MAC destination address to be filtered. |
| 1.3.6.1.4.1.2.6.2.7.1.3.1.5 | ColumnibmmacAddrFilterOutDestMask | read-only | mandatory | Mask to allow ibmmacAddrFilterOutDestAddress to be used as a range of values. |
| 1.3.6.1.4.1.2.6.2.7.1.3.1.6 | ColumnibmmacAddrFilterOutType | read-only | mandatory | Type type of entry either sr or tb |
| 1.3.6.1.4.1.2.6.2.7.2 | NodeibmbridgeSAPFilters | |||
| 1.3.6.1.4.1.2.6.2.7.2.1 | TableibmsapFilterInfoTable | not-accessible | mandatory | Table of SAP filtering information. |
| 1.3.6.1.4.1.2.6.2.7.2.1.1 | RowibmsapFilterInfoEntry | not-accessible | mandatory | SAP filtering information for a single interface. |
| 1.3.6.1.4.1.2.6.2.7.2.1.1.1 | ColumnibmsapFilterIfIndex | read-only | mandatory | The value of this object identifies the interface for which this entry contains management information. The value of this object for a particular interface has… |
| 1.3.6.1.4.1.2.6.2.7.2.1.1.2 | ColumnibmsapFilterInBcastType | read-only | mandatory | For the incoming SAP filter table, determines what type of frames will be filtered. |
| 1.3.6.1.4.1.2.6.2.7.2.1.1.3 | ColumnibmsapFilterOutBcastType | read-only | mandatory | For the outgoing SAP filter table, determines what type of frames will be filtered. |
| 1.3.6.1.4.1.2.6.2.7.2.1.1.4 | ColumnibmsapFilterIn | read-only | mandatory | A bitmap of all possible source SAPs (even) that will be on or off depending on whether or not an incoming frame with that SAP is to be forwarded. |
| 1.3.6.1.4.1.2.6.2.7.2.1.1.5 | ColumnibmsapFilterOut | read-only | mandatory | A bitmap of all possible source SAPs (even) that will be on or off depending on whether or not an outgoing frame with that SAP is to be forwarded. |
| 1.3.6.1.4.1.2.6.2.7.2.1.1.6 | ColumnibmsapFilterInNotForwarded | read-only | mandatory | Number of packets not forwarded, in the incoming direction, because they were filtered out. |
| 1.3.6.1.4.1.2.6.2.7.2.1.1.7 | ColumnibmsapFilterOutNotForwarded | read-only | mandatory | Number of packets not forwarded, in the outgoing direction, because they were filtered out. |
| 1.3.6.1.4.1.2.6.2.7.2.1.1.8 | ColumnibmsapFilterType | read-only | mandatory | The type of entry, either sr or tb. |
| 1.3.6.1.4.1.2.6.2.7.3 | NodeibmbridgeSNAPFilters | |||
| 1.3.6.1.4.1.2.6.2.7.3.1 | TableibmsnapFilterInfoTable | not-accessible | mandatory | Table of SNAP filtering information. Note that SNAP filtering only comes into play if packets with source SAP 0xAA are being forwarded. |
| 1.3.6.1.4.1.2.6.2.7.3.1.1 | RowibmsnapFilterInfoEntry | not-accessible | mandatory | SNAP filtering information for a single interface. |
| 1.3.6.1.4.1.2.6.2.7.3.1.1.1 | ColumnibmsnapFilterIfIndex | read-only | mandatory | The value of this object identifies the interface for which this entry contains management information. The value of this object for a particular interface has… |
| 1.3.6.1.4.1.2.6.2.7.3.1.1.2 | ColumnibmsnapFilterInFilterType | read-only | mandatory | For the incoming SNAP filter table, determines whether the entries are permit or deny entries. |
| 1.3.6.1.4.1.2.6.2.7.3.1.1.3 | ColumnibmsnapFilterOutFilterType | read-only | mandatory | For the outgoing SNAP filter table, determines whether the entries are permit or deny entries. |
| 1.3.6.1.4.1.2.6.2.7.3.1.1.4 | ColumnibmsnapFilterInNotForwarded | read-only | mandatory | Number of packets not forwarded, in the incoming direction, because they were filtered out. |
| 1.3.6.1.4.1.2.6.2.7.3.1.1.5 | ColumnibmsnapFilterOutNotForwarded | read-only | mandatory | Number of packets not forwarded, in the outgoing direction, because they were filtered out. |
| 1.3.6.1.4.1.2.6.2.7.3.1.1.6 | ColumnibmsnapFilterType | read-only | mandatory | The type of entry, either sr or tb. |
| 1.3.6.1.4.1.2.6.2.7.3.2 | TableibmsnapFilterInTable | not-accessible | mandatory | Table of SNAP type filtering information for incoming frames. Note that the entries in this table only come into play if packets with source SAP 0xAA are being… |
| 1.3.6.1.4.1.2.6.2.7.3.2.1 | RowibmsnapFilterInEntry | not-accessible | mandatory | Filtering information for a single SNAP value on a single interface. |
| 1.3.6.1.4.1.2.6.2.7.3.2.1.1 | ColumnibmsnapFilterInIfIndex | read-only | mandatory | The value of this object identifies the interface for which this entry contains management information. The value of this object for a particular interface has… |
| 1.3.6.1.4.1.2.6.2.7.3.2.1.2 | ColumnibmsnapFilterInValue | read-only | mandatory | Indicates which SNAP value to filter. |
| 1.3.6.1.4.1.2.6.2.7.3.2.1.3 | ColumnibmsnapFilterInMask | read-only | mandatory | Mask to allow ibmsnapFilterInValue to be used as a range of values. |
| 1.3.6.1.4.1.2.6.2.7.3.2.1.4 | ColumnibmsnapFilterInType | read-only | mandatory | The type of entry, either sr or tb. |
| 1.3.6.1.4.1.2.6.2.7.3.3 | TableibmsnapFilterOutTable | not-accessible | mandatory | Table of SNAP filtering information for outgoing frames. Note that the entries in this table only come into play if packets with source SAP 0xAA are being forw… |
| 1.3.6.1.4.1.2.6.2.7.3.3.1 | RowibmsnapFilterOutEntry | not-accessible | mandatory | Filtering information for a single SNAP value on a single interface. |
| 1.3.6.1.4.1.2.6.2.7.3.3.1.1 | ColumnibmsnapFilterOutIfIndex | read-only | mandatory | The value of this object identifies the interface for which this entry contains management information. The value of this object for a particular interface has… |
| 1.3.6.1.4.1.2.6.2.7.3.3.1.2 | ColumnibmsnapFilterOutValue | read-only | mandatory | Indicates which SNAP values to filter. |
| 1.3.6.1.4.1.2.6.2.7.3.3.1.3 | ColumnibmsnapFilterOutMask | read-only | mandatory | Mask to allow ibmsnapFilterOutValue to be used as a range of values. |
| 1.3.6.1.4.1.2.6.2.7.3.3.1.4 | ColumnibmsnapFilterOutType | read-only | mandatory | The type of entry, either sr or tb. |
| 1.3.6.1.4.1.2.6.2.7.4 | NodeibmbridgeRingFilters | |||
| 1.3.6.1.4.1.2.6.2.7.4.1 | TableibmringFilterInfoTable | not-accessible | mandatory | Table of ring filtering information. |
| 1.3.6.1.4.1.2.6.2.7.4.1.1 | RowibmringFilterInfoEntry | not-accessible | mandatory | Ring filtering information for a single interface. |
| 1.3.6.1.4.1.2.6.2.7.4.1.1.1 | ColumnibmringFilterIfIndex | read-only | mandatory | The value of this object identifies the interface for which this entry contains management information. The value of this object for a particular interface has… |
| 1.3.6.1.4.1.2.6.2.7.4.1.1.2 | ColumnibmringFilterInBcastType | read-only | mandatory | For the incoming ring filter table, determines what type of frames will be filtered. |
| 1.3.6.1.4.1.2.6.2.7.4.1.1.3 | ColumnibmringFilterOutBcastType | read-only | mandatory | For the outgoing ring filter table, determines what type of frames will be filtered. |
| 1.3.6.1.4.1.2.6.2.7.4.1.1.4 | ColumnibmringFilterInFilterType | read-only | mandatory | For the incoming ring filter table, determines whether the entries are permit or deny entries. |
| 1.3.6.1.4.1.2.6.2.7.4.1.1.5 | ColumnibmringFilterOutFilterType | read-only | mandatory | For the outgoing ring filter table, determines whether the entries are permit or deny entries. |
| 1.3.6.1.4.1.2.6.2.7.4.1.1.6 | ColumnibmringFilterInNotForwarded | read-only | mandatory | Number of packets not forwarded, in the incoming direction, because they were filtered out. |
| 1.3.6.1.4.1.2.6.2.7.4.1.1.7 | ColumnibmringFilterOutNotForwarded | read-only | mandatory | Number of packets not forwarded, in the outgoing direction, because they were filtered out. |
| 1.3.6.1.4.1.2.6.2.7.4.2 | TableibmringFilterInTable | not-accessible | mandatory | Table of ring number filtering information for incoming frames. |
| 1.3.6.1.4.1.2.6.2.7.4.2.1 | RowibmringFilterInEntry | not-accessible | mandatory | Filtering information for a single ring number on a single interface. |
| 1.3.6.1.4.1.2.6.2.7.4.2.1.1 | ColumnibmringFilterInIfIndex | read-only | mandatory | The value of this object identifies the interface for which this entry contains management information. The value of this object for a particular interface has… |
| 1.3.6.1.4.1.2.6.2.7.4.2.1.2 | ColumnibmringFilterInNumber | read-only | mandatory | Indicates which ring number to filter. |
| 1.3.6.1.4.1.2.6.2.7.4.2.1.3 | ColumnibmringFilterInMask | read-only | mandatory | Mask to allow ibmringFilterInNumber to be used as a range of values. |
| 1.3.6.1.4.1.2.6.2.7.4.3 | TableibmringFilterOutTable | not-accessible | mandatory | Table of ring number filtering information for outgoing frames. |
| 1.3.6.1.4.1.2.6.2.7.4.3.1 | RowibmringFilterOutEntry | not-accessible | mandatory | Filtering information for a single ring number on a single interface. |
| 1.3.6.1.4.1.2.6.2.7.4.3.1.1 | ColumnibmringFilterOutIfIndex | read-only | mandatory | The value of this object identifies the interface for which this entry contains management information. The value of this object for a particular interface has… |
| 1.3.6.1.4.1.2.6.2.7.4.3.1.2 | ColumnibmringFilterOutNumber | read-only | mandatory | Indicates which ring number to filter. |
| 1.3.6.1.4.1.2.6.2.7.4.3.1.3 | ColumnibmringFilterOutMask | read-only | mandatory | Mask to allow ibmringFilterOutNumber to be used as a range of values. |
| 1.3.6.1.4.1.2.6.2.7.5 | NodeibmbridgeHopCountFilters | |||
| 1.3.6.1.4.1.2.6.2.7.5.1 | TableibmhopCountFilterInfoTable | not-accessible | mandatory | Table of hop count filtering information. |
| 1.3.6.1.4.1.2.6.2.7.5.1.1 | RowibmhopCountFilterInfoEntry | not-accessible | mandatory | Hop count filtering information for a single interface. |
| 1.3.6.1.4.1.2.6.2.7.5.1.1.1 | ColumnibmhopCountFilterIfIndex | read-only | mandatory | The value of this object identifies the interface for which this entry contains management information. The value of this object for a particular interface has… |
| 1.3.6.1.4.1.2.6.2.7.5.1.1.2 | ColumnibmhopCountFilterBcastType | read-only | mandatory | Determines what type of incoming frames will be filtered. |
| 1.3.6.1.4.1.2.6.2.7.5.1.1.3 | ColumnibmhopCountFilterCount | read-only | mandatory | The number of hops allowed for incoming frames. |
| 1.3.6.1.4.1.2.6.2.7.6 | NodeibmbridgeWindowFilters | |||
| 1.3.6.1.4.1.2.6.2.7.6.1 | TableibmwindowFilterInfoTable | not-accessible | mandatory | Table of Window filtering information. |
| 1.3.6.1.4.1.2.6.2.7.6.1.1 | RowibmwindowFilterInfoEntry | not-accessible | mandatory | Window filtering information for a single interface. |
| 1.3.6.1.4.1.2.6.2.7.6.1.1.1 | ColumnibmwindowFilterIfIndex | read-only | mandatory | The value of this object identifies the interface for which this entry contains management information. The value of this object for a particular interface has… |
| 1.3.6.1.4.1.2.6.2.7.6.1.1.2 | ColumnibmwindowFilterInBcastType | read-only | mandatory | For the incoming Window filter table, determines what type of frames will be filtered. |
| 1.3.6.1.4.1.2.6.2.7.6.1.1.3 | ColumnibmwindowFilterOutBcastType | read-only | mandatory | For the outgoing Window filter table, determines what type of frames will be filtered. |
| 1.3.6.1.4.1.2.6.2.7.6.1.1.4 | ColumnibmwindowFilterInFilterType | read-only | mandatory | For the incoming filter table, determines whether the entries are permit or deny entries. |
| 1.3.6.1.4.1.2.6.2.7.6.1.1.5 | ColumnibmwindowFilterOutFilterType | read-only | mandatory | For the outgoing filter table, determines whether the entries are permit or deny entries. |
| 1.3.6.1.4.1.2.6.2.7.6.1.1.6 | ColumnibmwindowFilterInNotForwarded | read-only | mandatory | Number of packets not forwarded, in the incoming direction, because they were filtered out. |
| 1.3.6.1.4.1.2.6.2.7.6.1.1.7 | ColumnibmwindowFilterOutNotForwarded | read-only | mandatory | Number of packets not forwarded, in the outgoing direction, because they were filtered out. |
| 1.3.6.1.4.1.2.6.2.7.6.1.1.8 | ColumnibmwindowFilterType | read-only | mandatory | The type of entry, either sr or tb. |
| 1.3.6.1.4.1.2.6.2.7.6.2 | TableibmwindowFilterInTable | not-accessible | mandatory | Table of Window filtering information for incoming frames. |
| 1.3.6.1.4.1.2.6.2.7.6.2.1 | RowibmwindowFilterInEntry | not-accessible | mandatory | Filtering information for incoming frames. |
| 1.3.6.1.4.1.2.6.2.7.6.2.1.1 | ColumnibmwindowFilterInIfIndex | read-only | mandatory | The value of this object identifies the interface for which this entry contains management information. The value of this object for a particular interface has… |
| 1.3.6.1.4.1.2.6.2.7.6.2.1.2 | ColumnibmwindowFilterInContents | read-only | mandatory | String of bytes that will be compared with bytes in the frame. |
| 1.3.6.1.4.1.2.6.2.7.6.2.1.3 | ColumnibmwindowFilterInMaskString | read-only | mandatory | String of bytes that will be masked with bytes in the contents field. |
| 1.3.6.1.4.1.2.6.2.7.6.2.1.4 | ColumnibmwindowFilterInOffsetStart | read-only | mandatory | Determines the starting point where the contents field should be applied. A value of 'MAC' means the base is at the beginning of the destination MAC address fi… |
| 1.3.6.1.4.1.2.6.2.7.6.2.1.5 | ColumnibmwindowFilterInNumBytes | read-only | mandatory | Number of bytes in the contents field that are used for filtering. |
| 1.3.6.1.4.1.2.6.2.7.6.2.1.6 | ColumnibmwindowFilterInOffset | read-only | mandatory | Number of bytes offset into the frame from the offset start point to begin the compare. |
| 1.3.6.1.4.1.2.6.2.7.6.2.1.7 | ColumnibmwindowFilterInId | read-only | mandatory | A unique identifier associated with this window filter entry. |
| 1.3.6.1.4.1.2.6.2.7.6.2.1.8 | ColumnibmwindowFilterInType | read-only | mandatory | The type of entry, either sr or tb. |
| 1.3.6.1.4.1.2.6.2.7.6.3 | TableibmwindowFilterOutTable | not-accessible | mandatory | Table of Window filtering information for outgoing frames. |
| 1.3.6.1.4.1.2.6.2.7.6.3.1 | RowibmwindowFilterOutEntry | not-accessible | mandatory | Filtering information for outgoing frames. |
| 1.3.6.1.4.1.2.6.2.7.6.3.1.1 | ColumnibmwindowFilterOutIfIndex | read-only | mandatory | The value of this object identifies the interface for which this entry contains management information. The value of this object for a particular interface has… |
| 1.3.6.1.4.1.2.6.2.7.6.3.1.2 | ColumnibmwindowFilterOutContents | read-only | mandatory | String of bytes that will be compared with bytes in the frame. |
| 1.3.6.1.4.1.2.6.2.7.6.3.1.3 | ColumnibmwindowFilterOutMaskString | read-only | mandatory | String of bytes that will be masked with bytes in the contents field. |
| 1.3.6.1.4.1.2.6.2.7.6.3.1.4 | ColumnibmwindowFilterOutOffsetStart | read-only | mandatory | Determines the starting point where the contents field should be applied. A value of 'MAC' means the base is at the beginning of the destination MAC address fi… |
| 1.3.6.1.4.1.2.6.2.7.6.3.1.5 | ColumnibmwindowFilterOutNumBytes | read-only | mandatory | Number of bytes in the contents field that are used for filtering. |
| 1.3.6.1.4.1.2.6.2.7.6.3.1.6 | ColumnibmwindowFilterOutOffset | read-only | mandatory | Number of bytes offset into the frame from the offset start point to begin the compare. |
| 1.3.6.1.4.1.2.6.2.7.6.3.1.7 | ColumnibmwindowFilterOutId | read-only | mandatory | A unique identifier associated with this window filter entry. |
| 1.3.6.1.4.1.2.6.2.7.6.3.1.8 | ColumnibmwindowFilterOutType | read-only | mandatory | The type of entry, either sr or tb. |
| 1.3.6.1.4.1.2.6.2.7.7 | NodeibmbridgeFiltOrderTable | |||
| 1.3.6.1.4.1.2.6.2.7.7.1 | TableibmFiltOrderInTable | not-accessible | mandatory | Table of information describing which order the filters are applied for incoming frames. |
| 1.3.6.1.4.1.2.6.2.7.7.1.1 | RowibmFiltOrderInEntry | not-accessible | mandatory | Filter order information for incoming frames. |
| 1.3.6.1.4.1.2.6.2.7.7.1.1.1 | ColumnibmFiltOrderInIfIndex | read-only | mandatory | The value of this object identifies the interface for which this entry contains management information. The value of this object for a particular interface has… |
| 1.3.6.1.4.1.2.6.2.7.7.1.1.2 | ColumnibmFiltOrderInPriority | read-only | mandatory | The priority of when a filter is applied to an incoming frame. A value of 1 signifies that it is applied first. |
| 1.3.6.1.4.1.2.6.2.7.7.1.1.3 | ColumnibmFiltOrderInName | read-only | mandatory | The name of the filter applied to incoming frames that is associated with the priority, ibmFiltOrderInPriority. |
| 1.3.6.1.4.1.2.6.2.7.7.1.1.4 | ColumnibmFiltOrderInType | read-only | mandatory | The type of entry, either sr or tb. |
| 1.3.6.1.4.1.2.6.2.7.7.2 | TableibmFiltOrderOutTable | not-accessible | mandatory | Table of information describing which order the filters are applied for outgoing frames. |
| 1.3.6.1.4.1.2.6.2.7.7.2.1 | RowibmFiltOrderOutEntry | not-accessible | mandatory | Filter order information for outgoing frames. |
| 1.3.6.1.4.1.2.6.2.7.7.2.1.1 | ColumnibmFiltOrderOutIfIndex | read-only | mandatory | The value of this object identifies the interface for which this entry contains management information. The value of this object for a particular interface has… |
| 1.3.6.1.4.1.2.6.2.7.7.2.1.2 | ColumnibmFiltOrderOutPriority | read-only | mandatory | The priority of when a filter is applied to an outgoing frame. A value of 1 signifies that it is applied first. |
| 1.3.6.1.4.1.2.6.2.7.7.2.1.3 | ColumnibmFiltOrderOutName | read-only | mandatory | The name of the filter applied to outgoing frames that is associated with the priority, ibmFiltOrderOutPriority. |
| 1.3.6.1.4.1.2.6.2.7.7.2.1.4 | ColumnibmFiltOrderOutType | read-only | mandatory | The type of entry, either sr or tb. |
| 1.3.6.1.4.1.2.6.2.7.8 | NodeibmbridgeRIFFilters | |||
| 1.3.6.1.4.1.2.6.2.7.8.1 | TableibmRIFFilterInfoTable | not-accessible | mandatory | Table of routing information field filtering information. |
| 1.3.6.1.4.1.2.6.2.7.8.1.1 | RowibmRIFFilterInfoEntry | not-accessible | mandatory | Routing information field filtering information for a single interface. |
| 1.3.6.1.4.1.2.6.2.7.8.1.1.1 | ColumnibmRIFFilterIfIndex | read-only | mandatory | The value of this object identifies the interface for which this entry contains management information. The value of this object for a particular interface has… |
| 1.3.6.1.4.1.2.6.2.7.8.1.1.2 | ColumnibmRIFFilterInBcastType | read-only | mandatory | For the incoming routing information field filter table, determines what type of frames will be filtered. |
| 1.3.6.1.4.1.2.6.2.7.8.1.1.3 | ColumnibmRIFFilterOutBcastType | read-only | mandatory | For the outgoing routing information field filter table, determines what type of frames will be filtered. |
| 1.3.6.1.4.1.2.6.2.7.8.1.1.4 | ColumnibmRIFFilterInFilterType | read-only | mandatory | For the incoming routing information filter table, determines whether the entries are permit or deny entries. |
| 1.3.6.1.4.1.2.6.2.7.8.1.1.5 | ColumnibmRIFFilterOutFilterType | read-only | mandatory | For the outgoing routing information field filter table, determines whether the entries are permit or deny entries. |
| 1.3.6.1.4.1.2.6.2.7.8.1.1.6 | ColumnibmRIFFilterInNotForwarded | read-only | mandatory | Number of packets not forwarded, in the incoming direction, because they were filtered out. |
| 1.3.6.1.4.1.2.6.2.7.8.1.1.7 | ColumnibmRIFFilterOutNotForwarded | read-only | mandatory | Number of packets not forwarded, in the outgoing direction, because they were filtered out. |
| 1.3.6.1.4.1.2.6.2.7.8.2 | TableibmRIFFilterInTable | not-accessible | mandatory | Table of routing information field filtering information for incoming frames. |
| 1.3.6.1.4.1.2.6.2.7.8.2.1 | RowibmRIFFilterInEntry | not-accessible | mandatory | Filtering information for a single routing information field on a single interface. |
| 1.3.6.1.4.1.2.6.2.7.8.2.1.1 | ColumnibmRIFFilterInIfIndex | read-only | mandatory | The value of this object identifies the interface for which this entry contains management information. The value of this object for a particular interface has… |
| 1.3.6.1.4.1.2.6.2.7.8.2.1.2 | ColumnibmRIFFilterInRingNumber | read-only | mandatory | Indicates which ring number to filter. |
| 1.3.6.1.4.1.2.6.2.7.8.2.1.3 | ColumnibmRIFFilterInRingMask | read-only | mandatory | Mask to allow ibmRIFFilterInRingNumber to be used as a range of values. |
| 1.3.6.1.4.1.2.6.2.7.8.2.1.4 | ColumnibmRIFFilterInBridgeNumber | read-only | mandatory | Indicates which bridge number to filter. |
| 1.3.6.1.4.1.2.6.2.7.8.2.1.5 | ColumnibmRIFFilterInBridgeMask | read-only | mandatory | Mask to allow ibmRIFFilterInBridgeNumber to be used as a range of values. |
| 1.3.6.1.4.1.2.6.2.7.8.2.1.6 | ColumnibmRIFFilterInRouteDesignator | read-only | mandatory | Indicates which route designators in the routing information field are to be used for filtering. |
| 1.3.6.1.4.1.2.6.2.7.8.3 | TableibmRIFFilterOutTable | not-accessible | mandatory | Table of routing information field filtering information for outgoing frames. |
| 1.3.6.1.4.1.2.6.2.7.8.3.1 | RowibmRIFFilterOutEntry | not-accessible | mandatory | Filtering information for a single routing information field on a single interface. |
| 1.3.6.1.4.1.2.6.2.7.8.3.1.1 | ColumnibmRIFFilterOutIfIndex | read-only | mandatory | The value of this object identifies the interface for which this entry contains management information. The value of this object for a particular interface has… |
| 1.3.6.1.4.1.2.6.2.7.8.3.1.2 | ColumnibmRIFFilterOutRingNumber | read-only | mandatory | Indicates which ring number to filter. |
| 1.3.6.1.4.1.2.6.2.7.8.3.1.3 | ColumnibmRIFFilterOutRingMask | read-only | mandatory | Mask to allow ibmRIFFilterOutRingNumber to be used as a range of values. |
| 1.3.6.1.4.1.2.6.2.7.8.3.1.4 | ColumnibmRIFFilterOutBridgeNumber | read-only | mandatory | Indicates which bridge number to filter. |
| 1.3.6.1.4.1.2.6.2.7.8.3.1.5 | ColumnibmRIFFilterOutBridgeMask | read-only | mandatory | Mask to allow ibmRIFFilterOutBridgeNumber to be used as a range of values. |
| 1.3.6.1.4.1.2.6.2.7.8.3.1.6 | ColumnibmRIFFilterOutRouteDesignator | read-only | mandatory | Indicates which route designators in the routing information field are to be used for filtering. |
| 1.3.6.1.4.1.2.6.2.8 | Nodeibmfr | |||
| 1.3.6.1.4.1.2.6.2.8.1 | TableibmfrDlcmiTable | not-accessible | mandatory | The Parameters for the Data Link Connection Management Interface corresponding to any given ifEntry. |
| 1.3.6.1.4.1.2.6.2.8.1.1 | RowibmfrDlcmiEntry | not-accessible | mandatory | The Parameters for the Data Link Connection Management Interface. |
| 1.3.6.1.4.1.2.6.2.8.1.1.1 | ColumnibmfrDlcmiIfIndex | read-only | mandatory | The ifIndex value of the corresponding ifEn- try. |
| 1.3.6.1.4.1.2.6.2.8.1.1.2 | ColumnibmfrDlcmiState | read-only | mandatory | This variable states which Data Link Connec- tion Management scheme is active (and by impli- cation, what DLCI it uses) on the Frame Relay interface. |
| 1.3.6.1.4.1.2.6.2.8.1.1.3 | ColumnibmfrDlcmiAddress | read-only | mandatory | This variable states which address format is in use on the Frame Relay interface. |
| 1.3.6.1.4.1.2.6.2.8.1.1.4 | ColumnibmfrDlcmiAddressLen | read-only | mandatory | This variable states which address length in octets. In the case of Q922 format, the length indicates the entire length of the address in- cluding the control … |
| 1.3.6.1.4.1.2.6.2.8.1.1.5 | ColumnibmfrDlcmiPollingInterval | read-only | mandatory | This is the number of seconds between succes- sive status enquiry messages. |
| 1.3.6.1.4.1.2.6.2.8.1.1.6 | ColumnibmfrDlcmiFullEnquiryInterval | read-only | mandatory | Number of status enquiry intervals that pass before issuance of a full status enquiry mes- sage. |
| 1.3.6.1.4.1.2.6.2.8.1.1.7 | ColumnibmfrDlcmiErrorThreshold | read-only | mandatory | This is the maximum number of unanswered Status Enquiries the equipment shall accept be- fore declaring the interface down. |
| 1.3.6.1.4.1.2.6.2.8.1.1.8 | ColumnibmfrDlcmiMonitoredEvents | read-only | mandatory | This is the maximum number of responses to FULL STATUS or LINK INTEGERITY VERIFICATION messages missed before the device will mark the interface down. |
| 1.3.6.1.4.1.2.6.2.8.1.1.9 | ColumnibmfrDlcmiMaxSupportedVCs | read-only | mandatory | The maximum number of Virtual Circuits allowed for this interface. Usually dictated by the Frame Relay network. In response to a SET, if a value less than zero… |
| 1.3.6.1.4.1.2.6.2.8.1.1.10 | ColumnibmfrDlcmiMulticast | read-only | mandatory | This indicates whether the Frame Relay provid- er offers a Multicast Service. |
| 1.3.6.1.4.1.2.6.2.8.2 | TableibmfrCircuitTable | not-accessible | mandatory | A table containing information about specific Data Link Connection Identifiers and corresponding virtual circuits. |
| 1.3.6.1.4.1.2.6.2.8.2.1 | RowibmfrCircuitEntry | not-accessible | mandatory | The information regarding a single Data Link Connection Identifier. |
| 1.3.6.1.4.1.2.6.2.8.2.1.1 | ColumnibmfrCircuitIfIndex | read-only | mandatory | The ifIndex Value of the ifEntry this virtual circuit is layered onto. |
| 1.3.6.1.4.1.2.6.2.8.2.1.2 | ColumnibmfrCircuitDlci | read-only | mandatory | The Data Link Connection Identifier for this virtual circuit. |
| 1.3.6.1.4.1.2.6.2.8.2.1.3 | ColumnibmfrCircuitState | read-only | mandatory | Indicates whether the particular virtual cir- cuit is operational. In the absence of a Data Link Connection Management Interface, virtual circuit entries (rows… |
| 1.3.6.1.4.1.2.6.2.8.2.1.4 | ColumnibmfrCircuitReceivedFECNs | read-only | mandatory | Number of frames received from the network in- dicating forward congestion since the virtual circuit was created. |
| 1.3.6.1.4.1.2.6.2.8.2.1.5 | ColumnibmfrCircuitReceivedBECNs | read-only | mandatory | Number of frames received from the network in- dicating backward congestion since the virtual circuit was created. |
| 1.3.6.1.4.1.2.6.2.8.2.1.6 | ColumnibmfrCircuitSentFrames | read-only | mandatory | The number of frames sent from this virtual circuit since it was created. |
| 1.3.6.1.4.1.2.6.2.8.2.1.7 | ColumnibmfrCircuitSentOctets | read-only | mandatory | The number of octets sent from this virtual circuit since it was created. |
| 1.3.6.1.4.1.2.6.2.8.2.1.8 | ColumnibmfrCircuitReceivedFrames | read-only | mandatory | Number of frames received over this virtual circuit since it was created. |
| 1.3.6.1.4.1.2.6.2.8.2.1.9 | ColumnibmfrCircuitReceivedOctets | read-only | mandatory | Number of octets received over this virtual circuit since it was created. |
| 1.3.6.1.4.1.2.6.2.8.2.1.10 | ColumnibmfrCircuitCreationTime | read-only | mandatory | The time when this virtual circuit was created, whether by the Data Link Connection Management Interface or by a SetRequest. The time value is relative to othe… |
| 1.3.6.1.4.1.2.6.2.8.2.1.11 | ColumnibmfrCircuitLastTimeChange | read-only | mandatory | The time when last there was a change in the virtual circuit state. The time value is relative to other times on this interface only. |
| 1.3.6.1.4.1.2.6.2.8.2.1.12 | ColumnibmfrCircuitCommittedBurst | read-only | mandatory | This variable indicates the maximum amount of data, in bits, that the network agrees to transfer under normal conditions, during the measurement interval. |
| 1.3.6.1.4.1.2.6.2.8.2.1.13 | ColumnibmfrCircuitExcessBurst | read-only | mandatory | This variable indicates the maximum amount of uncommitted data bits that the network will at- tempt to deliver over the measurement interval. By default, if no… |
| 1.3.6.1.4.1.2.6.2.8.2.1.14 | ColumnibmfrCircuitThroughput | read-only | mandatory | Throughput is the average number of 'Frame Re- lay Information Field' bits transferred per second across a user network interface in one direction, measured ov… |
| 1.3.6.1.4.1.2.6.2.8.3 | TableibmfrErrTable | not-accessible | mandatory | A table containing information about Errors on the Frame Relay interface. |
| 1.3.6.1.4.1.2.6.2.8.3.1 | RowibmfrErrEntry | not-accessible | mandatory | The error information for a single frame relay interface. |
| 1.3.6.1.4.1.2.6.2.8.3.1.1 | ColumnibmfrErrIfIndex | read-only | mandatory | The ifIndex Value of the corresponding ifEn- try. |
| 1.3.6.1.4.1.2.6.2.8.3.1.2 | ColumnibmfrErrType | read-only | mandatory | The type of error that was last seen on this interface. |
| 1.3.6.1.4.1.2.6.2.8.3.1.3 | ColumnibmfrErrData | read-only | mandatory | An octet string containing as much of the er- ror packet as possible. As a minimum, it must contain the Q.922 Address or as much as was delivered. It is desira… |
| 1.3.6.1.4.1.2.6.2.8.3.1.4 | ColumnibmfrErrTime | read-only | mandatory | The time at which the error was detected. The time value is relative to other times on this interface only. |
| 1.3.6.1.4.1.2.6.2.9 | Nodeibmdls | |||
| 1.3.6.1.4.1.2.6.2.9.1 | ScalaribmdlsVirtualRingSegmentNumber | read-only | mandatory | The token ring segment number used in all frames passed to or from the IBM 6611 Data Link Switching function. |
| 1.3.6.1.4.1.2.6.2.9.2 | ScalaribmdlsFrameFilterType | read-only | mandatory | The type of SNA filtering applied using the ibmdlsLocalFrameFilterTable and ibmdlsRemoteFrameFilterTable. If this field = permit(2), then all filters defined f… |
| 1.3.6.1.4.1.2.6.2.9.3 | ScalaribmdlsNameFilterType | read-only | mandatory | The type of NetBIOS filtering applied using the ibmdlsLocalNameFilterTable and ibmdlsRemoteNameFilterTable. If this field = permit(2), then all filters defined… |
| 1.3.6.1.4.1.2.6.2.9.4 | TableibmdlsRouterTable | not-accessible | mandatory | A table of information regarding all routers participating in Data Link Switching. |
| 1.3.6.1.4.1.2.6.2.9.4.1 | RowibmdlsRouterEntry | not-accessible | mandatory | Information for a single participating router. |
| 1.3.6.1.4.1.2.6.2.9.4.1.1 | ColumnibmdlsRouterAddress | read-only | mandatory | The IP address of the router participating in Data Link Switching. |
| 1.3.6.1.4.1.2.6.2.9.4.1.2 | ColumnibmdlsRouterStatus | read-only | mandatory | The current state of the remote connection |
| 1.3.6.1.4.1.2.6.2.9.4.1.3 | ColumnibmdlsRouterDefinedBy | read-only | mandatory | The origin of this entry. user(1) indicates that this router is defined via the Configuration Program. system(2) indicates that this router was defined automat… |
| 1.3.6.1.4.1.2.6.2.9.4.1.4 | ColumnibmdlsRouterInFrames | read-only | mandatory | Number of frames received from the partner router. |
| 1.3.6.1.4.1.2.6.2.9.4.1.5 | ColumnibmdlsRouterOutFrames | read-only | mandatory | Number of frames sent to the partner router. |
| 1.3.6.1.4.1.2.6.2.9.5 | TableibmdlsLocalFrameFilterTable | not-accessible | mandatory | The SNA local frame filter table. This table contains information regarding the filtering of SNA frames received from local LAN segments. |
| 1.3.6.1.4.1.2.6.2.9.5.1 | RowibmdlsLocalFrameFilterEntry | not-accessible | mandatory | Filter information for a MAC address source-destination pair. |
| 1.3.6.1.4.1.2.6.2.9.5.1.1 | ColumnibmdlsLocalFrameFilterID | read-only | mandatory | A unique identifier for this filter. |
| 1.3.6.1.4.1.2.6.2.9.5.1.2 | ColumnibmdlsLocalFrameFilterSrcAddress | read-only | mandatory | The source MAC address that this filter is applied to. |
| 1.3.6.1.4.1.2.6.2.9.5.1.3 | ColumnibmdlsLocalFrameFilterSrcMask | read-only | mandatory | A mask indicating the bits of the source address considered significant when using the filter. For every bit equal to one in the mask, the same bit in the sour… |
| 1.3.6.1.4.1.2.6.2.9.5.1.4 | ColumnibmdlsLocalFrameFilterDestAddress | read-only | mandatory | The destination MAC address that this filter is applied to. |
| 1.3.6.1.4.1.2.6.2.9.5.1.5 | ColumnibmdlsLocalFrameFilterDestMask | read-only | mandatory | A mask indicating the bits of the destination address considered significant when using the filter. For every bit equal to one in the mask, the same bit in the… |
| 1.3.6.1.4.1.2.6.2.9.6 | TableibmdlsRemoteFrameFilterTable | not-accessible | mandatory | The SNA remote frame filter table. This table contains information regarding the filtering of SNA frames received from other participating DLS routers. |
| 1.3.6.1.4.1.2.6.2.9.6.1 | RowibmdlsRemoteFrameFilterEntry | not-accessible | mandatory | Filter information for a MAC address source-destination pair. |
| 1.3.6.1.4.1.2.6.2.9.6.1.1 | ColumnibmdlsRemoteFrameFilterID | read-only | mandatory | A unique identifier for this filter. |
| 1.3.6.1.4.1.2.6.2.9.6.1.2 | ColumnibmdlsRemoteFrameFilterSrcAddress | read-only | mandatory | The source MAC address that this filter is applied to. |
| 1.3.6.1.4.1.2.6.2.9.6.1.3 | ColumnibmdlsRemoteFrameFilterSrcMask | read-only | mandatory | A mask indicating the bits of the source address considered significant when using the filter. For every bit equal to one in the mask, the same bit in the sour… |
| 1.3.6.1.4.1.2.6.2.9.6.1.4 | ColumnibmdlsRemoteFrameFilterDestAddress | read-only | mandatory | The destination MAC address that this filter is applied to. |
| 1.3.6.1.4.1.2.6.2.9.6.1.5 | ColumnibmdlsRemoteFrameFilterDestMask | read-only | mandatory | A mask indicating the bits of the destination address considered significant when using the filter. For every bit equal to one in the mask, the same bit in the… |
| 1.3.6.1.4.1.2.6.2.9.7 | TableibmdlsLocalNameFilterTable | not-accessible | mandatory | The NetBIOS local name filter table. This table contains information regarding the filtering of NetBIOS frames received from local LAN segments. |
| 1.3.6.1.4.1.2.6.2.9.7.1 | RowibmdlsLocalNameFilterEntry | not-accessible | mandatory | Filter information for a NetBIOS source-destination name pair. |
| 1.3.6.1.4.1.2.6.2.9.7.1.1 | ColumnibmdlsLocalNameFilterID | read-only | mandatory | A unique identifier for this filter. |
| 1.3.6.1.4.1.2.6.2.9.7.1.2 | ColumnibmdlsLocalNameFilterSrcAddress | read-only | mandatory | The source NetBIOS name that this filter is applied to. |
| 1.3.6.1.4.1.2.6.2.9.7.1.3 | ColumnibmdlsLocalNameFilterDestAddress | read-only | mandatory | The destination NetBIOS name that this filter is applied to. |
| 1.3.6.1.4.1.2.6.2.9.8 | TableibmdlsRemoteNameFilterTable | not-accessible | mandatory | The NetBIOS name filter table. This table contains information regarding the filtering of NetBIOS frames received from other participating DLS routers. |
| 1.3.6.1.4.1.2.6.2.9.8.1 | RowibmdlsRemoteNameFilterEntry | not-accessible | mandatory | Filter information for a NetBIOS source-destination name pair. |
| 1.3.6.1.4.1.2.6.2.9.8.1.1 | ColumnibmdlsRemoteNameFilterID | read-only | mandatory | A unique identifier for this filter. |
| 1.3.6.1.4.1.2.6.2.9.8.1.2 | ColumnibmdlsRemoteNameFilterSrcAddress | read-only | mandatory | The source NetBIOS name that this filter is applied to. |
| 1.3.6.1.4.1.2.6.2.9.8.1.3 | ColumnibmdlsRemoteNameFilterDestAddress | read-only | mandatory | The destination NetBIOS name that this filter is applied to. |
| 1.3.6.1.4.1.2.6.2.9.9 | TableibmdlsDefaultDestTable | not-accessible | mandatory | Table of default routers for MAC addresses. |
| 1.3.6.1.4.1.2.6.2.9.9.1 | RowibmdlsDefaultDestEntry | not-accessible | mandatory | Mapping of a MAC address to a default router. |
| 1.3.6.1.4.1.2.6.2.9.9.1.1 | ColumnibmdlsDefaultDestAddress | read-only | mandatory | The destination address that this table entry applies to. |
| 1.3.6.1.4.1.2.6.2.9.9.1.2 | ColumnibmdlsDefaultRouterAddress | read-only | mandatory | The default router used for reaching the destination address in ibmdlsDefaultDestAddress. |
| 1.3.6.1.4.1.2.6.2.9.10 | TableibmdlsDefaultNBDestTable | not-accessible | mandatory | Table of default routers for NetBIOS names. |
| 1.3.6.1.4.1.2.6.2.9.10.1 | RowibmdlsDefaultNBDestEntry | not-accessible | mandatory | Mapping of a NetBIOS name to a default router. |
| 1.3.6.1.4.1.2.6.2.9.10.1.1 | ColumnibmdlsDefaultNBDestName | read-only | mandatory | The destination NetBIOS name that this table entry applies to. |
| 1.3.6.1.4.1.2.6.2.9.10.1.2 | ColumnibmdlsDefaultNBRouterAddress | read-only | mandatory | The default router used for reaching the destination name in ibmdlsDefaultNBDestName. |
| 1.3.6.1.4.1.2.6.2.9.11 | TableibmdlsStationTable | not-accessible | mandatory | Table of configuration information on SNA stations attached to this router. |
| 1.3.6.1.4.1.2.6.2.9.11.1 | RowibmdlsStationEntry | not-accessible | mandatory | Information on a single SNA station attached to this router. |
| 1.3.6.1.4.1.2.6.2.9.11.1.1 | ColumnibmdlsStationIfIndex | read-only | mandatory | The value of IfIndex for the port to which this station is attached. |
| 1.3.6.1.4.1.2.6.2.9.11.1.2 | ColumnibmdlsStationAddress | read-only | mandatory | The SDLC address of this station. |
| 1.3.6.1.4.1.2.6.2.9.11.1.3 | ColumnibmdlsStationTransmitWindowCount | read-only | mandatory | The number of SDLC information frames to send to this station before turning the line around to get a response. |
| 1.3.6.1.4.1.2.6.2.9.11.1.4 | ColumnibmdlsStationRetransmitCount | read-only | mandatory | The number of contiguous information frame bursts that will be transmitted to this station before declaring a permanent transmission error. |
| 1.3.6.1.4.1.2.6.2.9.11.1.5 | ColumnibmdlsStationRetransmitThreshold | read-only | mandatory | The number of information frame transmissions allowed as a percentage of total information frame transmissions. The specified rate is the maximum rate of retra… |
| 1.3.6.1.4.1.2.6.2.9.11.1.6 | ColumnibmdlsStationForceDisconnectTimeout | read-only | mandatory | The number of seconds that the IBM 6611 will wait after requesting a disconnect from the link (DISC) before forcing a disconnect. |
| 1.3.6.1.4.1.2.6.2.9.11.1.7 | ColumnibmdlsStationMaxIfieldSize | read-only | mandatory | The value in bytes of the maximum I-field size (a multiple of 256 plus 9). |
| 1.3.6.1.4.1.2.6.2.9.11.1.8 | ColumnibmdlsStationPrimaryRepollTimeout | read-only | mandatory | The length of time (in tenths of seconds) that the primary station will wait for a response from the secondary station. |
| 1.3.6.1.4.1.2.6.2.9.11.1.9 | ColumnibmdlsStationPrimaryRepollCount | read-only | mandatory | The number of times that the primary station will poll the secondary station unsuccessfully before marking the station as not working. |
| 1.3.6.1.4.1.2.6.2.9.11.1.10 | ColumnibmdlsStationPrimaryRepollThreshold | read-only | mandatory | The number of repolls as a percentage of the total polls sent to the secondary station. The specified percentage equals the maximum rate of repolls allowed, ab… |
| 1.3.6.1.4.1.2.6.2.9.11.1.11 | ColumnibmdlsStationPrimarySlowListTimeout | read-only | mandatory | The number of seconds that the primary station will wait between polls to stations on the slow list. |
| 1.3.6.1.4.1.2.6.2.9.11.1.12 | ColumnibmdlsStationSrcAddress | read-only | mandatory | The token ring physical address used for this station. |
| 1.3.6.1.4.1.2.6.2.9.11.1.13 | ColumnibmdlsStationDestAddress | read-only | mandatory | The token ring physical address to which this station should be connected. If this information is not available the IBM 6611 Network Processor will return a le… |
| 1.3.6.1.4.1.2.6.2.9.12 | TableibmdlsCirTable | not-accessible | mandatory | Table of information on DLS circuits active on this router. |
| 1.3.6.1.4.1.2.6.2.9.12.1 | RowibmdlsCirEntry | not-accessible | mandatory | Information on a DLS circuit. |
| 1.3.6.1.4.1.2.6.2.9.12.1.1 | ColumnibmdlsCirIfIndex | read-only | mandatory | The value of IfIndex for the interface supporting this circuit. |
| 1.3.6.1.4.1.2.6.2.9.12.1.2 | ColumnibmdlsCirSrcAddress | read-only | mandatory | The MAC address of the source of this circuit. |
| 1.3.6.1.4.1.2.6.2.9.12.1.3 | ColumnibmdlsCirSrcSap | read-only | mandatory | The SAP identifier of the source of this circuit. |
| 1.3.6.1.4.1.2.6.2.9.12.1.4 | ColumnibmdlsCirDestAddress | read-only | mandatory | The MAC address of the destination of this circuit. |
| 1.3.6.1.4.1.2.6.2.9.12.1.5 | ColumnibmdlsCirDestSap | read-only | mandatory | The SAP identifier of the destination of this circuit. |
| 1.3.6.1.4.1.2.6.2.9.12.1.6 | ColumnibmdlsCirPartnerRouterAddress | read-only | mandatory | The IP address of the partner router used by this circuit. |
| 1.3.6.1.4.1.2.6.2.9.12.1.7 | ColumnibmdlsCirLocalLinkState | read-only | mandatory | The state of the local link station used by this circuit. |
| 1.3.6.1.4.1.2.6.2.9.12.1.8 | ColumnibmdlsCirLocalLinkSubState | read-only | mandatory | The sub-state of the local link station used by this circuit. |
| 1.3.6.1.4.1.2.6.2.9.12.1.9 | ColumnibmdlsCirLocalLinkRouting | read-only | mandatory | The routing information field used by the local link portion of this circuit. The routing information field consists of a 2-byte routing control field and up t… |
| 1.3.6.1.4.1.2.6.2.9.12.1.10 | ColumnibmdlsCirLocalLinkTestCmdsSent | read-only | mandatory | The number of test commands sent by the local link station used by this circuit. |
| 1.3.6.1.4.1.2.6.2.9.12.1.11 | ColumnibmdlsCirLocalLinkTestCmdsFail | read-only | mandatory | The number of test commands failed by the local link station used by this circuit. |
| 1.3.6.1.4.1.2.6.2.9.12.1.12 | ColumnibmdlsCirLocalLinkTestCmdsRcv | read-only | mandatory | The number of test commands received by the local link station used by this circuit. |
| 1.3.6.1.4.1.2.6.2.9.12.1.13 | ColumnibmdlsCirLocalLinkDataPktSent | read-only | mandatory | The number of sequenced data packets sent by the local link station used by this circuit. |
| 1.3.6.1.4.1.2.6.2.9.12.1.14 | ColumnibmdlsCirLocalLinkDataPktResent | read-only | mandatory | The number of sequenced data packets resent by the local link station used by this circuit. |
| 1.3.6.1.4.1.2.6.2.9.12.1.15 | ColumnibmdlsCirLocalLinkMaxContResent | read-only | mandatory | The maximum number of contiguous resendings by the local link station used by this circuit. |
| 1.3.6.1.4.1.2.6.2.9.12.1.16 | ColumnibmdlsCirLocalLinkDataPktRcv | read-only | mandatory | The number of sequenced data packets received by the local link station used by this circuit. |
| 1.3.6.1.4.1.2.6.2.9.12.1.17 | ColumnibmdlsCirLocalLinkInvalidPktRcv | read-only | mandatory | The number of invalid packets received by the local link station used by this circuit. |
| 1.3.6.1.4.1.2.6.2.9.12.1.18 | ColumnibmdlsCirLocalLinkAdpRcvErr | read-only | mandatory | The number of data-detected receive errors by the local link station used by this circuit. |
| 1.3.6.1.4.1.2.6.2.9.12.1.19 | ColumnibmdlsCirLocalLinkAdpSendErr | read-only | mandatory | The number of data-detected transmit errors by the local link station used by this circuit. |
| 1.3.6.1.4.1.2.6.2.9.12.1.20 | ColumnibmdlsCirLocalLinkRcvInactiveTimeouts | read-only | mandatory | The number of inactivity timeouts received by the local link station used by this circuit. |
| 1.3.6.1.4.1.2.6.2.9.12.1.21 | ColumnibmdlsCirLocalLinkCmdPollsSent | read-only | mandatory | The number of command polls sent by the local link station used by this circuit. |
| 1.3.6.1.4.1.2.6.2.9.12.1.22 | ColumnibmdlsCirLocalLinkCmdRepollsSent | read-only | mandatory | The number of command repolls sent by the local link station used by this circuit. |
| 1.3.6.1.4.1.2.6.2.9.12.1.23 | ColumnibmdlsCirLocalLinkCmdContRepolls | read-only | mandatory | The number of continuous repolls sent by the local link station used by this circuit. |
| 1.3.6.1.4.1.2.6.2.9.12.1.24 | ColumnibmdlsCirLocalAddress | read-only | mandatory | The address (ibmdlsCirSrcAddress or ibmdlsCirDestAddress) that is local on this circuit. |
| 1.3.6.1.4.1.2.6.2.10 | Nodeibmppp | |||
| 1.3.6.1.4.1.2.6.2.10.1 | TableibmpppLinkControlTable | not-accessible | mandatory | A table containing PPP-link specific control variables for this managed object. An entry in this table is uniquely identified by the ibmpppLinkControlIndex val… |
| 1.3.6.1.4.1.2.6.2.10.1.1 | RowibmpppLinkControlEntry | not-accessible | mandatory | Management control information about a particular PPP Link. |
| 1.3.6.1.4.1.2.6.2.10.1.1.1 | ColumnibmpppLinkControlIndex | read-only | mandatory | A unique value for each PPP link. Its value ranges between 1 and the value of ifNumber. The interface identified by a particular value of this index is that id… |
| 1.3.6.1.4.1.2.6.2.10.1.1.2 | ColumnibmpppLinkCRCSize | read-only | mandatory | Number of bits used in the CRC on this link. See section 3.1, 'Frame Check Sequence (FCS) Field' on page 5 of RFC 1171. Setting this object to a new value will… |
| 1.3.6.1.4.1.2.6.2.10.1.1.3 | ColumnibmpppLinkRestartTimerValue | read-only | mandatory | The value used for the Restart Timer. It is in units of hundredths of a second. See section 4.3, 'Timers and Counters' on page 20 of RFC 1171. |
| 1.3.6.1.4.1.2.6.2.10.1.1.4 | ColumnibmpppLinkMaxRestarts | read-only | mandatory | The Max-Restarts parameter described in section 4.3, 'Timers and Counters' on page 20 of RFC 1171. |
| 1.3.6.1.4.1.2.6.2.10.1.1.5 | ColumnibmpppLinkLocalMRU | read-only | mandatory | The MRU (Maximum Receive Unit) of this node on the link. See section 2.1, page 2, 'Maximum Receive Unit' of RFC 1172. Changing this object will have effect whe… |
| 1.3.6.1.4.1.2.6.2.10.1.1.6 | ColumnibmpppLinkRemoteMRU | read-only | mandatory | What this node believes is the MRU for the node on the other end of the link. See section 2.1, page 2, 'Maximum Receive Unit' of RFC 1172. Changing this object… |
| 1.3.6.1.4.1.2.6.2.10.1.1.7 | ColumnibmpppLinkLocalACCMap | read-only | mandatory | The (ACC) Asynchronous-Control-Character-Map for this node. This is the ACC Map that the node on the other end of the link will use when building a packet to s… |
| 1.3.6.1.4.1.2.6.2.10.1.1.8 | ColumnibmpppLinkRemoteACCMap | read-only | mandatory | The (ACC) Asynchronous-Control-Character-Map that this node uses when building a packet to send to the node on the other end of the link. See section 2.2, page… |
| 1.3.6.1.4.1.2.6.2.10.1.1.9 | ColumnibmpppLinkMagicLoopCount | read-only | mandatory | The number of times that this node will do a Magic Number Configuration before deciding that the link is looped back. 0 indicates that the node does not do Mag… |
| 1.3.6.1.4.1.2.6.2.10.1.1.10 | ColumnibmpppLinkCommand | read-only | mandatory | See section 4.14 on page 13 of RFC 1171. Reading from this variable will return no-op(1). The IBM 6611 Network Processor always provides a value of no-op(1) fo… |
| 1.3.6.1.4.1.2.6.2.10.2 | TableibmpppLinkStatusTable | not-accessible | mandatory | A table containing PPP-link status specific information for this managed object. An entry in this table is uniquely identified by the ibmpppLinkStatusIndex val… |
| 1.3.6.1.4.1.2.6.2.10.2.1 | RowibmpppLinkStatusEntry | not-accessible | mandatory | Status information about a particular PPP Link. |
| 1.3.6.1.4.1.2.6.2.10.2.1.1 | ColumnibmpppLinkStatusIndex | read-only | mandatory | A unique value for each PPP link. Its value ranges between 1 and the value of ifNumber. The interface identified by a particular value of this index is that id… |
| 1.3.6.1.4.1.2.6.2.10.2.1.2 | ColumnibmpppLinkVersion | read-only | mandatory | The version of LCP that is being run over this link (per RFC 1171). This value currently must be 1. |
| 1.3.6.1.4.1.2.6.2.10.2.1.3 | ColumnibmpppLinkCurrentState | read-only | mandatory | The current state of the link automaton. See section 4.1.3. 'State Transition Table' on page 13 of RFC 1171. |
| 1.3.6.1.4.1.2.6.2.10.2.1.4 | ColumnibmpppLinkPreviousState | read-only | mandatory | The immediately previous state of the link automaton. See section 4.1.3. 'State Transition Table' on page 13 of RFC 1171. |
| 1.3.6.1.4.1.2.6.2.10.2.1.5 | ColumnibmpppLinkChangeTime | read-only | mandatory | The value of sysUpTime when the state of the link automaton last changed. |
| 1.3.6.1.4.1.2.6.2.10.2.1.6 | ColumnibmpppLinkMagicNumber | read-only | mandatory | This node's Magic Number. See section 2.4, page 7, 'Magic Number' of RFC 1172. |
| 1.3.6.1.4.1.2.6.2.10.2.1.7 | ColumnibmpppLinkLocalQualityPeriod | read-only | mandatory | This is the maximum interval at which this node will transmit Link-Quality-Report Packets. See section 2.5, on page 10 of RFC 1172. This object is in units of … |
| 1.3.6.1.4.1.2.6.2.10.2.1.8 | ColumnibmpppLinkRemoteQualityPeriod | read-only | mandatory | This is the maximum interval at which this node expects that the other node will transmit Link-Quality-Report Packets. See section 2.5, on page 10 of RFC 1172.… |
| 1.3.6.1.4.1.2.6.2.10.2.1.9 | ColumnibmpppLinkProtocolCompression | read-only | mandatory | Indicates the Protocol compression that has been configured on the link. Receive-only(1) indicates that this node can receive compressed packets but won't send… |
| 1.3.6.1.4.1.2.6.2.10.2.1.10 | ColumnibmpppLinkACCompression | read-only | mandatory | Indicates the Address/Control Field compression that has been configured on the link. Receive-only(1) indicates that this node can receive compressed packets b… |
| 1.3.6.1.4.1.2.6.2.10.2.1.11 | ColumnibmpppLinkMeasurementsValid | read-only | mandatory | The current value of the Measurements-Valid state variable used for Link-Quality Management. See section 3.5, page 19, of RFC 1172. |
| 1.3.6.1.4.1.2.6.2.10.2.1.12 | ColumnibmpppLinkQuality | read-only | mandatory | The current quality of the link as declared by the nodes Link-Quality Management modules. No effort is made to define good or bad, nor the policy used to deter… |
| 1.3.6.1.4.1.2.6.2.10.2.1.13 | ColumnibmpppLinkPhysical | read-only | mandatory | A reference to MIB definitions specific to the particular physical interface type (e.g. T1) being used by the PPP Link. If the agent is unable to obtain this i… |
| 1.3.6.1.4.1.2.6.2.10.3 | TableibmpppLinkErrorsTable | not-accessible | mandatory | A table containing PPP-link specific statistical information for this managed object. An entry in this table is uniquely identified by the ibmpppLinkErrorsInde… |
| 1.3.6.1.4.1.2.6.2.10.3.1 | RowibmpppLinkErrorsEntry | not-accessible | mandatory | Error information about a particular PPP Link. |
| 1.3.6.1.4.1.2.6.2.10.3.1.1 | ColumnibmpppLinkErrorsIndex | read-only | mandatory | A unique value for each PPP link. Its value ranges between 1 and the value of ifNumber. The interface identified by a particular value of this index is that id… |
| 1.3.6.1.4.1.2.6.2.10.3.1.2 | ColumnibmpppLinkBadAddresses | read-only | mandatory | The number of packets received with an incorrect Address Field. See section 3.1, Page 5, 'Address Field' of RFC 1171. |
| 1.3.6.1.4.1.2.6.2.10.3.1.3 | ColumnibmpppLinkLastBadAddress | read-only | mandatory | The most recent incorrect address received on this link. |
| 1.3.6.1.4.1.2.6.2.10.3.1.4 | ColumnibmpppLinkBadControls | read-only | mandatory | The number of packets received on this link with an incorrect Control Field. See Section 3.1, Page 5, 'Flag Sequence' of RFC 1171. |
| 1.3.6.1.4.1.2.6.2.10.3.1.5 | ColumnibmpppLinkLastBadControl | read-only | mandatory | The most recent incorrect Control Field received on this link. |
| 1.3.6.1.4.1.2.6.2.10.3.1.6 | ColumnibmpppLinkLastUnknownProtocol | read-only | mandatory | The most recently received unknown Protocol. An unknown Protocol is one which has a well-formed Protocol number, but which the PPP implementation does not know… |
| 1.3.6.1.4.1.2.6.2.10.3.1.7 | ColumnibmpppLinkInvalidProtocols | read-only | mandatory | The number of times that a packet has been received with an invalid Protocol specified in the Protocol Field. An invalid Protocol is one which does not conform… |
| 1.3.6.1.4.1.2.6.2.10.3.1.8 | ColumnibmpppLinkLastInvalidProtocol | read-only | mandatory | The most recently received invalid Protocol. |
| 1.3.6.1.4.1.2.6.2.10.3.1.9 | ColumnibmpppLinkPacketTooLongs | read-only | mandatory | The number of received packets that have been discarded because their length exceeded the MRU. |
| 1.3.6.1.4.1.2.6.2.10.3.1.10 | ColumnibmpppLinkBadCRCs | read-only | mandatory | The number of received packets that have been discarded due to having an incorrect CRC. |
| 1.3.6.1.4.1.2.6.2.10.3.1.11 | ColumnibmpppLinkConfigTimeouts | read-only | mandatory | The number of Configure Request packets that have timed out. |
| 1.3.6.1.4.1.2.6.2.10.3.1.12 | ColumnibmpppLinkTerminateTimeouts | read-only | mandatory | The number of Terminate Request packets that have timed out. |
| 1.3.6.1.4.1.2.6.2.10.4 | TableibmpppLinkQualityTable | not-accessible | mandatory | A table containing PPP-link specific statistical information for this managed object. An entry in this table is uniquely identified by the ibmpppLinkQualityInd… |
| 1.3.6.1.4.1.2.6.2.10.4.1 | RowibmpppLinkQualityEntry | not-accessible | mandatory | Link Quality Management information about a particular PPP Link. |
| 1.3.6.1.4.1.2.6.2.10.4.1.1 | ColumnibmpppLinkQualityIndex | read-only | mandatory | A unique value for each PPP link. Its value ranges between 1 and the value of ifNumber. The interface identified by a particular value of this index is that id… |
| 1.3.6.1.4.1.2.6.2.10.4.1.2 | ColumnibmpppLinkInTxLQRs | read-only | mandatory | The current value of In-Tx-LQRs used in Link-Quality Management. See section 3.5, page 19, of RFC 1172. |
| 1.3.6.1.4.1.2.6.2.10.4.1.3 | ColumnibmpppLinkInTxPackets | read-only | mandatory | The current value of the In-Tx-Packets counter used for Link-Quality Management. See section 3.5, page 19, of RFC 1172. |
| 1.3.6.1.4.1.2.6.2.10.4.1.4 | ColumnibmpppLinkLastOutTxPackets | read-only | mandatory | The current value of the Last-Out-Tx-Packets-Ctr counter used bu Link-Quality Management. See section 3.5, page 19, of RFC 1172. |
| 1.3.6.1.4.1.2.6.2.10.4.1.5 | ColumnibmpppLinkInTxOctets | read-only | mandatory | The current value of the In-Tx-Octets counter used for Link-Quality Management. See section 3.5, page 19, of RFC 1172. |
| 1.3.6.1.4.1.2.6.2.10.4.1.6 | ColumnibmpppLinkLastOutTxOctets | read-only | mandatory | The current value of the Last-Out-Tx-Octets-Counter counter used for Link-Quality Management. See section 3.5, page 19, of RFC 1172. |
| 1.3.6.1.4.1.2.6.2.10.4.1.7 | ColumnibmpppLinkInRxPackets | read-only | mandatory | The current value of the In-Rx-Packets counter used for Link-Quality Management. See section 3.5, page 19, of RFC 1172. |
| 1.3.6.1.4.1.2.6.2.10.4.1.8 | ColumnibmpppLinkLastInRxPackets | read-only | mandatory | The current value of the Last-In-Rx-Packets-Ctr counter used for Link-Quality Management. See section 3.5, page 19, of RFC 1172. |
| 1.3.6.1.4.1.2.6.2.10.4.1.9 | ColumnibmpppLinkInRxOctets | read-only | mandatory | The current value of the In-Rx-Octets counter used for Link-Quality Management. See section 3.5, page 19, of RFC 1172. |
| 1.3.6.1.4.1.2.6.2.10.4.1.10 | ColumnibmpppLinkLastInRxOctets | read-only | mandatory | The current value of the Last-In-Rx-Octets-Ctr counter used for Link-Quality Management. See section 3.5, page 19, of RFC 1172. |
| 1.3.6.1.4.1.2.6.2.10.5 | NodeibmpppProtocolTables | |||
| 1.3.6.1.4.1.2.6.2.10.5.1 | TableibmpppIPTable | not-accessible | mandatory | A table containing specific information for the running of the IP over PPP in this managed object. An entry in this table is uniquely identified by the ibmpppI… |
| 1.3.6.1.4.1.2.6.2.10.5.1.1 | RowibmpppIPEntry | not-accessible | mandatory | All information pertinant to running the IP over a single PPP link. |
| 1.3.6.1.4.1.2.6.2.10.5.1.1.1 | ColumnibmpppIPLinkNumber | read-only | mandatory | The value of ibmpppLinkIndex for the link over which this instance of the IP is being run. |
| 1.3.6.1.4.1.2.6.2.10.5.1.1.2 | ColumnibmpppIPRejects | read-only | mandatory | The number of Protocol Reject Messages received when attempting to send an IP packet over the link identified by ibmpppIPLinkNumber. |
| 1.3.6.1.4.1.2.6.2.10.5.1.1.3 | ColumnibmpppIPInPackets | read-only | mandatory | The number of IP packets received on the link identified by ibmpppIPLinkNumber. |
| 1.3.6.1.4.1.2.6.2.10.5.1.1.4 | ColumnibmpppIPInOctets | read-only | mandatory | The number of octets received in IP packets received on the link identified by ibmpppIPLinkNumber. Only octets in the PPP Information Field are counted. Octets… |
| 1.3.6.1.4.1.2.6.2.10.5.1.1.5 | ColumnibmpppIPOutPackets | read-only | mandatory | The number of IP packets sent on the link identified by ibmpppIPLinkNumber. |
| 1.3.6.1.4.1.2.6.2.10.5.1.1.6 | ColumnibmpppIPOutOctets | read-only | mandatory | The number of octets all in IP Packets sent on the link identified by ibmpppIPLinkNumber. Only octets in the PPP Information Field are counted. Octets inserted… |
| 1.3.6.1.4.1.2.6.2.10.5.2 | TableibmpppIPCPTable | not-accessible | mandatory | A table containing specific information for the running of the IPCP over PPP in this managed object. An entry in this table is uniquely identified by the ibmpp… |
| 1.3.6.1.4.1.2.6.2.10.5.2.1 | RowibmpppIPCPEntry | not-accessible | mandatory | All information pertinant to running the IPCP over a single PPP link. |
| 1.3.6.1.4.1.2.6.2.10.5.2.1.1 | ColumnibmpppIPCPLinkNumber | read-only | mandatory | The value of ibmpppLinkIndex for the link over which this instance of the IPCP is being run. |
| 1.3.6.1.4.1.2.6.2.10.5.2.1.2 | ColumnibmpppIPCPRejects | read-only | mandatory | The number of Protocol Reject Messages received when attempting to send an IPCP Packet over the link identified by ibmpppIPCPLinkNumber. |
| 1.3.6.1.4.1.2.6.2.10.5.2.1.3 | ColumnibmpppIPCPInPackets | read-only | mandatory | The number of IPCP packets received on the link identified by ibmpppIPCPLinkNumber. |
| 1.3.6.1.4.1.2.6.2.10.5.2.1.4 | ColumnibmpppIPCPInOctets | read-only | mandatory | The number of octets received in IPCP packets received on the link identified by ibmpppIPCPLinkNumber. Only octets in the PPP Information Field are counted. Oc… |
| 1.3.6.1.4.1.2.6.2.10.5.2.1.5 | ColumnibmpppIPCPOutPackets | read-only | mandatory | The number of IPCP packets sent on the link identified by ibmpppIPLinkNumber. |
| 1.3.6.1.4.1.2.6.2.10.5.2.1.6 | ColumnibmpppIPCPOutOctets | read-only | mandatory | The number of octets all in IPCP packets sent on the link identified by ibmpppIPCPLinkNumber. Only octets in the PPP Information Field are counted. Octets inse… |
| 1.3.6.1.4.1.2.6.2.10.5.2.1.7 | ColumnibmpppIPCPCompressionType | read-only | mandatory | The compression type used on this link as defined in section 5.2 of RFC 1172. The numerical values that this object can be are the same as the numerical values… |
| 1.3.6.1.4.1.2.6.2.10.5.3 | TableibmpppLCPTable | not-accessible | mandatory | A table containing specific information for the running of LCP over PPP in this managed object. An entry in this table is uniquely identified by the ibmpppLCPL… |
| 1.3.6.1.4.1.2.6.2.10.5.3.1 | RowibmpppLCPEntry | not-accessible | mandatory | All information pertinant to running LCP over a single PPP link. |
| 1.3.6.1.4.1.2.6.2.10.5.3.1.1 | ColumnibmpppLCPLinkNumber | read-only | mandatory | The value of ibmpppLinkIndex for the link over which this instance of LCP is being run. |
| 1.3.6.1.4.1.2.6.2.10.5.3.1.2 | ColumnibmpppLCPRejects | read-only | mandatory | The number of Protocol Reject Messages received when attempting to send an LCP packet over the link identified by ibmpppLCPLinkNumber. This really ought not to… |
| 1.3.6.1.4.1.2.6.2.10.5.3.1.3 | ColumnibmpppLCPInPackets | read-only | mandatory | The number of LCP packets received on the link identified by ibmpppLCPLinkNumber. |
| 1.3.6.1.4.1.2.6.2.10.5.3.1.4 | ColumnibmpppLCPInOctets | read-only | mandatory | The number of octets received in LCP packets received on the link identified by ibmpppLCPLinkNumber. Only octets in the PPP Information Field are counted. Octe… |
| 1.3.6.1.4.1.2.6.2.10.5.3.1.5 | ColumnibmpppLCPOutPackets | read-only | mandatory | The number of LCP packets sent on the link identified by ibmpppLCPLinkNumber. |
| 1.3.6.1.4.1.2.6.2.10.5.3.1.6 | ColumnibmpppLCPOutOctets | read-only | mandatory | The number of octets all in LCP packets sent on the link identified by ibmpppLCPLinkNumber. Only octets in the PPP Information Field are counted. Octets insert… |
| 1.3.6.1.4.1.2.6.2.10.5.3.1.7 | ColumnibmpppLCPOutCRs | read-only | mandatory | Number of Configuration Request packets sent on this link. |
| 1.3.6.1.4.1.2.6.2.10.5.3.1.8 | ColumnibmpppLCPInCRs | read-only | mandatory | Number of Configuration Request packets received on this link. |
| 1.3.6.1.4.1.2.6.2.10.5.3.1.9 | ColumnibmpppLCPOutCAs | read-only | mandatory | Number of Configuration Acknowledge packets sent on this link. |
| 1.3.6.1.4.1.2.6.2.10.5.3.1.10 | ColumnibmpppLCPInCAs | read-only | mandatory | Number of Configuration Acknowledge packets received on this link. |
| 1.3.6.1.4.1.2.6.2.10.5.3.1.11 | ColumnibmpppLCPOutCNs | read-only | mandatory | Number of Configuration NAK packets sent on this link. |
| 1.3.6.1.4.1.2.6.2.10.5.3.1.12 | ColumnibmpppLCPInCNs | read-only | mandatory | Number of Configuration NAK packets received on this link. |
| 1.3.6.1.4.1.2.6.2.10.5.3.1.13 | ColumnibmpppLCPOutCRejs | read-only | mandatory | Number of Configuration Reject packets sent on this link. |
| 1.3.6.1.4.1.2.6.2.10.5.3.1.14 | ColumnibmpppLCPInCRejs | read-only | mandatory | Number of Configuration Reject packets received on this link. |
| 1.3.6.1.4.1.2.6.2.10.5.3.1.15 | ColumnibmpppLCPOutTRs | read-only | mandatory | Number of Terminate Request packets sent on this link. |
| 1.3.6.1.4.1.2.6.2.10.5.3.1.16 | ColumnibmpppLCPInTRs | read-only | mandatory | Number of Terminate Request packets received on this link. |
| 1.3.6.1.4.1.2.6.2.10.5.3.1.17 | ColumnibmpppLCPOutTAs | read-only | mandatory | Number of Terminate Acknowledge packets sent on this link. |
| 1.3.6.1.4.1.2.6.2.10.5.3.1.18 | ColumnibmpppLCPInTAs | read-only | mandatory | Number of Terminate Acknowledge packets received on this link. |
| 1.3.6.1.4.1.2.6.2.10.5.3.1.19 | ColumnibmpppLCPOutCodeRejs | read-only | mandatory | Number of Code Reject packets sent on this link. |
| 1.3.6.1.4.1.2.6.2.10.5.3.1.20 | ColumnibmpppLCPInCodeRejs | read-only | mandatory | Number of Code Reject packets received on this link. |
| 1.3.6.1.4.1.2.6.2.10.5.3.1.21 | ColumnibmpppLCPOutEchoReqs | read-only | mandatory | Number of Echo Request packets sent on this link. |
| 1.3.6.1.4.1.2.6.2.10.5.3.1.22 | ColumnibmpppLCPInEchoReqs | read-only | mandatory | Number of Echo Request packets received on this link. |
| 1.3.6.1.4.1.2.6.2.10.5.3.1.23 | ColumnibmpppLCPOutEchoReps | read-only | mandatory | Number of Echo Reply packets sent on this link. |
| 1.3.6.1.4.1.2.6.2.10.5.3.1.24 | ColumnibmpppLCPInEchoReps | read-only | mandatory | Number of Echo Reply packets received on this link. |
| 1.3.6.1.4.1.2.6.2.10.5.3.1.25 | ColumnibmpppLCPOutDiscReqs | read-only | mandatory | Number of Discard Request packets sent on this link. |
| 1.3.6.1.4.1.2.6.2.10.5.3.1.26 | ColumnibmpppLCPInDiscReqs | read-only | mandatory | Number of Discard Request packets received on this link. |
| 1.3.6.1.4.1.2.6.2.11 | Nodeibmxns | |||
| 1.3.6.1.4.1.2.6.2.11.1 | ScalaribmxnsidpForwarding | read-only | mandatory | Indicates if this node is acting as an XNS router. |
| 1.3.6.1.4.1.2.6.2.11.4 | TableibmxnsConfigTable | not-accessible | mandatory | The table of XNS configuration information gathered on a per-interface basis. |
| 1.3.6.1.4.1.2.6.2.11.4.1 | RowibmxnsConfigEntry | not-accessible | mandatory | XNS configuration information for a single interface. |
| 1.3.6.1.4.1.2.6.2.11.4.1.1 | ColumnibmxnsPortIfIndex | read-only | mandatory | The value of this object identifies the interface for which this entry contains management information. The value of this object for a particular interface has… |
| 1.3.6.1.4.1.2.6.2.11.4.1.2 | ColumnibmxnsPortStatus | read-only | mandatory | The status of the XNS protocol stack on this interface. |
| 1.3.6.1.4.1.2.6.2.11.4.1.3 | ColumnibmxnsidpChecksum | read-only | mandatory | Indicates the type of checksumming being done by IDP. |
| 1.3.6.1.4.1.2.6.2.11.4.1.4 | ColumnibmxnsErrpActive | read-only | mandatory | Indicates if this port is originating error protocol packets. |
| 1.3.6.1.4.1.2.6.2.11.4.1.5 | ColumnibmxnsLoopbackActive | read-only | mandatory | Indicates if this port will use the hardware to loopback locally addressed packets or return the packet to the system via a software loopback. |
| 1.3.6.1.4.1.2.6.2.11.5 | ScalaribmxnsidpInReceives | read-only | mandatory | Total number of IDP datagrams received. |
| 1.3.6.1.4.1.2.6.2.11.6 | ScalaribmxnsidpBcastInReceives | read-only | mandatory | Number of IDP broadcast datagrams received. |
| 1.3.6.1.4.1.2.6.2.11.7 | ScalaribmxnsidpMcastInReceives | read-only | mandatory | Number of IDP multicast datagrams received. |
| 1.3.6.1.4.1.2.6.2.11.8 | ScalaribmxnsidpInDiscards | read-only | mandatory | Number of incoming IDP datagrams discarded due to lack of resources. |
| 1.3.6.1.4.1.2.6.2.11.11 | ScalaribmxnsidpOutRequests | read-only | mandatory | Number of IDP datagrams generated by local IDP user protocols. This counter does not include any datagrams counted in ibmxnsidpForwDatagrams. |
| 1.3.6.1.4.1.2.6.2.11.12 | ScalaribmxnsidpBcastOutRequests | read-only | mandatory | Number of IDP broadcast datagrams generated by local IDP user protocols. This counter does not include any datagrams counted in ibmxnsidpForwDatagrams. |
| 1.3.6.1.4.1.2.6.2.11.13 | ScalaribmxnsidpMcastOutRequests | read-only | mandatory | Number of IDP multicast datagrams generated by local IDP user protocols. This counter does not include any datagrams counted in ibmxnsidpForwDatagrams. |
| 1.3.6.1.4.1.2.6.2.11.14 | ScalaribmxnsidpForwDatagrams | read-only | mandatory | Number of IDP datagrams for which an attempt was made to forward. |
| 1.3.6.1.4.1.2.6.2.11.15 | ScalaribmxnsidpOutDiscards | read-only | mandatory | Total number of outgoing IDP datagrams discarded. |
| 1.3.6.1.4.1.2.6.2.11.16 | ScalaribmxnsidpOutNoRoutes | read-only | mandatory | Number of outgoing IDP datagrams discarded because no route was available to the specified destination. |
| 1.3.6.1.4.1.2.6.2.11.17 | ScalaribmxnsidpRoutingDiscards | read-only | mandatory | Number of routing entries discarded even though they were valid. |
| 1.3.6.1.4.1.2.6.2.11.19 | ScalaribmxnsidpZeroDirBcast | read-only | mandatory | Number of IDP datagrams forwarded to the system due to zeronet broadcast. |
| 1.3.6.1.4.1.2.6.2.11.20 | ScalaribmxnsidpTooSmall | read-only | mandatory | Number of IDP datagrams with len < the size of an IDP header. |
| 1.3.6.1.4.1.2.6.2.11.21 | ScalaribmxnsidpBadLen | read-only | mandatory | Number of IDP datagrams with number of bytes in the packet less than the number of bytes specified in the IDP header field. |
| 1.3.6.1.4.1.2.6.2.11.22 | ScalaribmxnsidpBadSum | read-only | mandatory | Number of IDP datagrams with a bad checksum |
| 1.3.6.1.4.1.2.6.2.11.23 | ScalaribmxnsidpBadTTL | read-only | mandatory | Number of IDP datagrams with TTL value > IDP maximum hopcount of 16. |
| 1.3.6.1.4.1.2.6.2.11.24 | ScalaribmxnsErrUnspec | read-only | mandatory | Number of Error packets generated because an IDP datagram was dropped for unspecified reasons. |
| 1.3.6.1.4.1.2.6.2.11.25 | ScalaribmxnsErrChecksum | read-only | mandatory | Number of Error packets generated because an IDP datagram was dropped due a bad checksum. |
| 1.3.6.1.4.1.2.6.2.11.26 | ScalaribmxnsErrUnreach | read-only | mandatory | Number of Error packets generated because an IDP datagram was dropped due to an unreachable host. |
| 1.3.6.1.4.1.2.6.2.11.27 | ScalaribmxnsErrTTLExpired | read-only | mandatory | Number of Error packets generated because an IDP datagram was dropped because its time-to-live counter had expired. |
| 1.3.6.1.4.1.2.6.2.11.28 | ScalaribmxnsErrTooBig | read-only | mandatory | Number of Error packets generated because an IDP datagram was dropped because it was too large to be forwarded through this node. |
| 1.3.6.1.4.1.2.6.2.11.29 | ScalaribmxnsErrResources | read-only | mandatory | Number of Error packets generated because an IDP datagram was dropped due to lack of resources. |
| 1.3.6.1.4.1.2.6.2.11.30 | ScalaribmxnsErrCongWarn | read-only | mandatory | Number of Error packets generated for congestion warnings. |
| 1.3.6.1.4.1.2.6.2.11.31 | ScalaribmxnsErrCongDiscard | read-only | mandatory | Number of Error packets generated for congestion discards. |
| 1.3.6.1.4.1.2.6.2.11.32 | ScalaribmxnsErrSquelched | read-only | mandatory | Number of error packets that would have been generated, except that the faulted datagram had one of the following conditions: - was sent as link layer broadcas… |
| 1.3.6.1.4.1.2.6.2.11.33 | ScalaribmxnsErrOutMsgs | read-only | mandatory | Total number of error packets generated. |
| 1.3.6.1.4.1.2.6.2.11.34 | TableibmxnsAddrTable | not-accessible | mandatory | The XNS Address Table. |
| 1.3.6.1.4.1.2.6.2.11.34.1 | RowibmxnsAddrEntry | not-accessible | mandatory | An entry in the XNS address table. |
| 1.3.6.1.4.1.2.6.2.11.34.1.1 | ColumnibmxnsAddrAddress | read-only | mandatory | The XNS address to which this entry's addressing information pertains. |
| 1.3.6.1.4.1.2.6.2.11.34.1.2 | ColumnibmxnsAddrIfIndex | read-only | mandatory | The interface index which identifies the interface to which this entry is applicable. |
| 1.3.6.1.4.1.2.6.2.11.35 | TableibmxnsRouteTable | not-accessible | mandatory | The XNS Route Table. |
| 1.3.6.1.4.1.2.6.2.11.35.1 | RowibmxnsRouteEntry | not-accessible | mandatory | An entry in the XNS route table. |
| 1.3.6.1.4.1.2.6.2.11.35.1.1 | ColumnibmxnsRouteDest | read-only | mandatory | The desination network of this route. |
| 1.3.6.1.4.1.2.6.2.11.35.1.2 | ColumnibmxnsRouteIfIndex | read-only | mandatory | The index value which identifies the local interface through which the next hop of this route should be reached. |
| 1.3.6.1.4.1.2.6.2.11.35.1.3 | ColumnibmxnsRouteNextHop | read-only | mandatory | The XNS network address of the next hop of this route. |
| 1.3.6.1.4.1.2.6.2.11.35.1.4 | ColumnibmxnsRouteMetric | read-only | mandatory | The hop count to the destination. |
| 1.3.6.1.4.1.2.6.2.11.35.1.5 | ColumnibmxnsRouteUse | read-only | mandatory | Reference counter for this route. |
| 1.3.6.1.4.1.2.6.2.11.36 | TableibmxnsFilterTable | not-accessible | mandatory | The XNS Filter Table. |
| 1.3.6.1.4.1.2.6.2.11.36.1 | RowibmxnsFilterEntry | not-accessible | mandatory | An entry in the XNS filter table. |
| 1.3.6.1.4.1.2.6.2.11.36.1.1 | ColumnibmxnsFilterIfIndex | read-only | mandatory | The value of this object identifies the interface for which this entry contains management information. The value of this object for a particular interface has… |
| 1.3.6.1.4.1.2.6.2.11.36.1.2 | ColumnibmxnsFilterNumber | read-only | mandatory | A unique integer identifying this filter entry for this interface. |
| 1.3.6.1.4.1.2.6.2.11.36.1.3 | ColumnibmxnsFilterValue | read-only | mandatory | An octet string representing the IDP header information required by this filter entry. Incoming IDP packets will be bitwise ANDed with the value of ibmxnsFilte… |
| 1.3.6.1.4.1.2.6.2.11.36.1.4 | ColumnibmxnsFilterMask | read-only | mandatory | An octet string indicating the parts of the IDP header relevant to this filter entry. This mask will be bitwise ANDed with the IDP packet; if the result is equ… |
| 1.3.6.1.4.1.2.6.2.11.36.1.5 | ColumnibmxnsFilterType | read-only | mandatory | Determines whether this filter is a deny entry or a permit entry. |
| 1.3.6.1.4.1.2.6.2.11.36.1.6 | ColumnibmxnsFilterHCCompare | read-only | mandatory | Indicates the relational association desired if filtering is being done based on hop count. If filtering is not being done based on hop count (that is, if the … |
| 1.3.6.1.4.1.2.6.2.11.36.1.7 | ColumnibmxnsFilterUse | read-only | mandatory | Usage count for this filter entry. |
| 1.3.6.1.4.1.2.6.2.12 | Nodeibmipx | |||
| 1.3.6.1.4.1.2.6.2.12.1 | ScalaribmipxidpForwarding | read-only | mandatory | Indicates if this node is acting as an IPX router. |
| 1.3.6.1.4.1.2.6.2.12.4 | TableibmipxConfigTable | not-accessible | mandatory | The table of IPX configuration information gathered on a per-interface basis. |
| 1.3.6.1.4.1.2.6.2.12.4.1 | RowibmipxConfigEntry | not-accessible | mandatory | IPX configuration information for a single interface. |
| 1.3.6.1.4.1.2.6.2.12.4.1.1 | ColumnibmipxPortIfIndex | read-only | mandatory | The value of this object identifies the interface for which this entry contains management information. The value of this object for a particular interface has… |
| 1.3.6.1.4.1.2.6.2.12.4.1.2 | ColumnibmipxPortStatus | read-only | mandatory | The status of the IPX protocol stack on this interface. |
| 1.3.6.1.4.1.2.6.2.12.4.1.3 | ColumnibmipxidpChecksum | read-only | mandatory | Indicates the type of checksumming being done by IDP. |
| 1.3.6.1.4.1.2.6.2.12.4.1.5 | ColumnibmipxLoopbackActive | read-only | mandatory | Indicates if this port will use the hardware to loopback locally addressed packets or return the packet to the system via a software loopback. |
| 1.3.6.1.4.1.2.6.2.12.5 | ScalaribmipxidpInReceives | read-only | mandatory | Total number of IDP datagrams received. |
| 1.3.6.1.4.1.2.6.2.12.6 | ScalaribmipxidpBcastInReceives | read-only | mandatory | Number of IDP broadcast datagrams received. |
| 1.3.6.1.4.1.2.6.2.12.8 | ScalaribmipxidpInDiscards | read-only | mandatory | Number of incoming IDP datagrams discarded due to lack of resources. |
| 1.3.6.1.4.1.2.6.2.12.10 | ScalaribmipxidpInAddrErrors | read-only | mandatory | Number of incoming IDP datagrams discarded because the network portion of the address did not match the configured address for this host. |
| 1.3.6.1.4.1.2.6.2.12.11 | ScalaribmipxidpOutRequests | read-only | mandatory | Number of IDP datagrams generated by local IDP user protocols. This counter does not include any datagrams counted in ibmipxidpForwDatagrams. |
| 1.3.6.1.4.1.2.6.2.12.12 | ScalaribmipxidpBcastOutRequests | read-only | mandatory | Number of IDP broadcast datagrams generated by local IDP user protocols. This counter does not include any datagrams counted in ibmipxidpForwDatagrams. |
| 1.3.6.1.4.1.2.6.2.12.14 | ScalaribmipxidpForwDatagrams | read-only | mandatory | Number of IDP datagrams for which an attempt was made to forward. |
| 1.3.6.1.4.1.2.6.2.12.15 | ScalaribmipxidpOutDiscards | read-only | mandatory | Total number of outgoing IDP datagrams discarded. |
| 1.3.6.1.4.1.2.6.2.12.16 | ScalaribmipxidpOutNoRoutes | read-only | mandatory | Number of outgoing IDP datagrams discarded because no route was available to the specified destination. |
| 1.3.6.1.4.1.2.6.2.12.17 | ScalaribmipxidpRoutingDiscards | read-only | mandatory | Number of routing entries discarded even though they were valid. |
| 1.3.6.1.4.1.2.6.2.12.19 | ScalaribmipxidpZeroDirBcast | read-only | mandatory | Number of IDP datagrams forwarded to the system due to zeronet broadcast. |
| 1.3.6.1.4.1.2.6.2.12.20 | ScalaribmipxidpTooSmall | read-only | mandatory | Number of IDP datagrams with len < the size of an IDP header. |
| 1.3.6.1.4.1.2.6.2.12.21 | ScalaribmipxidpBadLen | read-only | mandatory | Number of IDP datagrams with number of bytes in the packet less than the number of bytes specified in the IDP header field. |
| 1.3.6.1.4.1.2.6.2.12.22 | ScalaribmipxidpBadSum | read-only | mandatory | Number of IDP datagrams with a bad checksum |
| 1.3.6.1.4.1.2.6.2.12.23 | ScalaribmipxidpBadTTL | read-only | mandatory | Number of IDP datagrams with TTL value > IDP maximum hopcount of 16. |
| 1.3.6.1.4.1.2.6.2.12.34 | TableibmipxAddrTable | not-accessible | mandatory | The IPX Address Table. |
| 1.3.6.1.4.1.2.6.2.12.34.1 | RowibmipxAddrEntry | not-accessible | mandatory | An entry in the IPX address table. |
| 1.3.6.1.4.1.2.6.2.12.34.1.1 | ColumnibmipxAddrAddress | read-only | mandatory | The IPX address to which this entry's addressing information pertains. |
| 1.3.6.1.4.1.2.6.2.12.34.1.2 | ColumnibmipxAddrIfIndex | read-only | mandatory | The interface index which identifies the interface to which this entry is applicable. |
| 1.3.6.1.4.1.2.6.2.12.35 | TableibmipxRouteTable | not-accessible | mandatory | The IPX Route Table. |
| 1.3.6.1.4.1.2.6.2.12.35.1 | RowibmipxRouteEntry | not-accessible | mandatory | An entry in the IPX route table. |
| 1.3.6.1.4.1.2.6.2.12.35.1.1 | ColumnibmipxRouteDest | read-only | mandatory | The desination network of this route. |
| 1.3.6.1.4.1.2.6.2.12.35.1.2 | ColumnibmipxRouteIfIndex | read-only | mandatory | The index value which identifies the local interface through which the next hop of this route should be reached. |
| 1.3.6.1.4.1.2.6.2.12.35.1.3 | ColumnibmipxRouteNextHop | read-only | mandatory | The IPX network address of the next hop of this route. |
| 1.3.6.1.4.1.2.6.2.12.35.1.4 | ColumnibmipxRouteMetric | read-only | mandatory | The hop count to the destination. |
| 1.3.6.1.4.1.2.6.2.12.35.1.5 | ColumnibmipxRouteUse | read-only | mandatory | Reference counter for this route. |
| 1.3.6.1.4.1.2.6.2.12.36 | TableibmipxFilterTable | not-accessible | mandatory | The IPX Filter Table. |
| 1.3.6.1.4.1.2.6.2.12.36.1 | RowibmipxFilterEntry | not-accessible | mandatory | An entry in the IPX filter table. |
| 1.3.6.1.4.1.2.6.2.12.36.1.1 | ColumnibmipxFilterIfIndex | read-only | mandatory | The value of this object identifies the interface for which this entry contains management information. The value of this object for a particular interface has… |
| 1.3.6.1.4.1.2.6.2.12.36.1.2 | ColumnibmipxFilterNumber | read-only | mandatory | A unique integer identifying this filter entry for this interface. |
| 1.3.6.1.4.1.2.6.2.12.36.1.3 | ColumnibmipxFilterValue | read-only | mandatory | An octet string representing the IDP header information required by this filter entry. Incoming IDP packets will be bitwise ANDed with the value of ibmipxFilte… |
| 1.3.6.1.4.1.2.6.2.12.36.1.4 | ColumnibmipxFilterMask | read-only | mandatory | An octet string indicating the parts of the IDP header relevant to this filter entry. This mask will be bitwise ANDed with the IDP packet; if the result is equ… |
| 1.3.6.1.4.1.2.6.2.12.36.1.5 | ColumnibmipxFilterType | read-only | mandatory | Determines whether this filter is a deny entry or a permit entry. |
| 1.3.6.1.4.1.2.6.2.12.36.1.6 | ColumnibmipxFilterHCCompare | read-only | mandatory | Indicates the relational association desired if filtering is being done based on hop count. If filtering is not being done based on hop count (that is, if the … |
| 1.3.6.1.4.1.2.6.2.12.36.1.7 | ColumnibmipxFilterUse | read-only | mandatory | Usage count for this filter entry. |
| 1.3.6.1.4.1.2.6.2.12.37 | ScalaribmipxsapStatInRequests | read-only | mandatory | Number of SAP requests received by this entity. |
| 1.3.6.1.4.1.2.6.2.12.38 | ScalaribmipxsapStatOutRequests | read-only | mandatory | Number of SAP requests sent by this entity. |
| 1.3.6.1.4.1.2.6.2.12.39 | ScalaribmipxsapStatInResponses | read-only | mandatory | Number of SAP responses received by this entity. |
| 1.3.6.1.4.1.2.6.2.12.40 | ScalaribmipxsapStatOutResponses | read-only | mandatory | Number of SAP responses sent by this entity. |
| 1.3.6.1.4.1.2.6.2.12.41 | ScalaribmipxsapStatInErrors | read-only | mandatory | Number of incoming SAP packets discarded due to errors. |
| 1.3.6.1.4.1.2.6.2.12.42 | ScalaribmipxsapStatOutDiscards | read-only | mandatory | Number of outgoing SAP packets discarded due to lack of resources. |
| 1.3.6.1.4.1.2.6.2.12.43 | TableibmipxsapServerTable | not-accessible | mandatory | Table of IPX servers. |
| 1.3.6.1.4.1.2.6.2.12.43.1 | RowibmipxsapServerEntry | not-accessible | mandatory | Information on a single server. |
| 1.3.6.1.4.1.2.6.2.12.43.1.1 | ColumnibmipxsapServerType | read-only | mandatory | The type of this server. |
| 1.3.6.1.4.1.2.6.2.12.43.1.2 | ColumnibmipxsapServerNet | read-only | mandatory | The IPX network number of this server. |
| 1.3.6.1.4.1.2.6.2.12.43.1.3 | ColumnibmipxsapServerHost | read-only | mandatory | The IPX host address of this server. |
| 1.3.6.1.4.1.2.6.2.12.43.1.4 | ColumnibmipxsapServerSocket | read-only | mandatory | The IPX socket number this server uses to advertise its service. |
| 1.3.6.1.4.1.2.6.2.12.43.1.5 | ColumnibmipxsapServerName | read-only | mandatory | The name of this server. |
| 1.3.6.1.4.1.2.6.2.12.43.1.6 | ColumnibmipxsapServerAge | read-only | mandatory | The number of seconds since this server entry was updated by the SAP protocol. |
| 1.3.6.1.4.1.2.6.2.12.43.1.7 | ColumnibmipxsapServerHops | read-only | mandatory | The number of network hops required to reach this server. |
| 1.3.6.1.4.1.2.6.2.12.43.1.8 | ColumnibmipxsapServerIfIndex | read-only | mandatory | The interface which is used to reach this server. The value of this object for a particular interface has the same value as the ifIndex object for the same int… |
| 1.3.6.1.4.1.2.6.2.12.43.1.9 | ColumnibmipxsapServerIndex | read-only | mandatory | A unique number identifying servers advertised at the same IPX network and host address. |
| 1.3.6.1.4.1.2.6.2.12.43.1.10 | ColumnibmipxsapServerRequestsFiltered | read-only | mandatory | Number of times a request for this server has been filtered. |
| 1.3.6.1.4.1.2.6.2.13 | Nodeibmappn | |||
| 1.3.6.1.4.1.2.6.2.13.1 | NodeibmappnNode | |||
| 1.3.6.1.4.1.2.6.2.13.1.1 | NodeibmappnGeneralInfoAndCaps | |||
| 1.3.6.1.4.1.2.6.2.13.1.1.1 | ScalaribmappnNodeCpName | read-only | mandatory | Administratively-assigned network name for this node in the format NETID.CPNAME. |
| 1.3.6.1.4.1.2.6.2.13.1.1.2 | ScalaribmappnNodeNetid | read-only | mandatory | Administratively-assigned APPN network identification, which can be from one to eight characters. This ID is used with the control point name to create a fully… |
| 1.3.6.1.4.1.2.6.2.13.1.1.3 | ScalaribmappnNodeBlockNum | read-only | mandatory | The block number is the first three digits of the node_id. These 3 hexadecimal digits identify the product and are not configurable. |
| 1.3.6.1.4.1.2.6.2.13.1.1.4 | ScalaribmappnNodeIdNum | read-only | mandatory | The ID number is the last 5 digits of the node_id. These 5 hexadecimal digits are administratively defined and combined with the 3 digit block number form the … |
| 1.3.6.1.4.1.2.6.2.13.1.1.5 | ScalaribmappnNodeType | read-only | mandatory | Type of APPN node, either network, len, or end node. |
| 1.3.6.1.4.1.2.6.2.13.1.1.6 | ScalaribmappnNodeUpTime | read-only | mandatory | Time (in hundredths of a second) since this APPN node was initialized. |
| 1.3.6.1.4.1.2.6.2.13.1.1.7 | ScalaribmappnNodeNegotLs | read-only | mandatory | Indicates whether this node supports negotiable link stations. |
| 1.3.6.1.4.1.2.6.2.13.1.1.8 | ScalaribmappnNodeSegReasm | read-only | mandatory | Indicates whether this node supports segment reassembly. This is only supported when segment generation is also supported. |
| 1.3.6.1.4.1.2.6.2.13.1.1.9 | ScalaribmappnNodeBindReasm | read-only | mandatory | Indicates whether this node supports Bind segment reassembly. This will only be supported when Bind segment generation is also supported. |
| 1.3.6.1.4.1.2.6.2.13.1.1.10 | ScalaribmappnNodeParallelTg | read-only | mandatory | Indicates whether this node supports parallel TGs. |
| 1.3.6.1.4.1.2.6.2.13.1.1.11 | ScalaribmappnNodeService | read-only | mandatory | Indicates whether this node allows call-in from nodes not defined locally. |
| 1.3.6.1.4.1.2.6.2.13.1.1.12 | ScalaribmappnNodeAdaptiveBindPacing | read-only | mandatory | Indicates whether this node supports adaptive bind pacing. |
| 1.3.6.1.4.1.2.6.2.13.1.2 | NodeibmappnNnUniqueInfoAndCaps | |||
| 1.3.6.1.4.1.2.6.2.13.1.2.1 | ScalaribmappnNodeNnRcvRegChar | read-only | mandatory | Indicates whether this node supports receiving registered characteristics. |
| 1.3.6.1.4.1.2.6.2.13.1.2.2 | ScalaribmappnNodeNnGateway | read-only | mandatory | Indicates whether this is a gateway node. |
| 1.3.6.1.4.1.2.6.2.13.1.2.3 | ScalaribmappnNodeNnCentralDirectory | read-only | mandatory | Indicates whether this node supports central directory cache. |
| 1.3.6.1.4.1.2.6.2.13.1.2.4 | ScalaribmappnNodeNnTreeCache | read-only | mandatory | Indicates whether this node supports route tree cache. |
| 1.3.6.1.4.1.2.6.2.13.1.2.5 | ScalaribmappnNodeNnTreeUpdate | read-only | mandatory | Indicates whether this node supports incremental_tree_update, which is only supported when tree caching is supported. |
| 1.3.6.1.4.1.2.6.2.13.1.2.6 | ScalaribmappnNodeNnRouteAddResist | read-only | mandatory | Route addition resistance is a value that indicates the relative desirability of using this node for intermediate session traffic. The value, which can be any … |
| 1.3.6.1.4.1.2.6.2.13.1.2.7 | ScalaribmappnNodeNnIsr | read-only | mandatory | Indicates whether the node supports intermediate session routing. |
| 1.3.6.1.4.1.2.6.2.13.1.2.8 | ScalaribmappnNodeNnFrsn | read-only | mandatory | Flow reduction sequence numbers (FRSNs) are associated with Topology Database Updates (TDUs) and are unique only within each APPN network node. A TDU can be as… |
| 1.3.6.1.4.1.2.6.2.13.1.3 | NodeibmappnEnUniqueCaps | |||
| 1.3.6.1.4.1.2.6.2.13.1.3.1 | ScalaribmappnNodeEnSegGen | read-only | mandatory | Indicates whether this end node supports segment generation. |
| 1.3.6.1.4.1.2.6.2.13.1.3.2 | ScalaribmappnNodeEnModeCosMap | read-only | mandatory | Indicates whether this end node supports mode name to COS name mapping. |
| 1.3.6.1.4.1.2.6.2.13.1.3.3 | ScalaribmappnNodeEnLocateCdinit | read-only | mandatory | Indicates whether this end node supports Locate Cdinit. |
| 1.3.6.1.4.1.2.6.2.13.1.3.4 | ScalaribmappnNodeEnSendRegNames | read-only | mandatory | Indicates whether the node will register its LUs with the adjacent serving network node: NO - do not register names YES - register names |
| 1.3.6.1.4.1.2.6.2.13.1.3.5 | ScalaribmappnNodeEnSendRegChar | read-only | mandatory | Indicates whether this node supports send register characteristics, which is only supported when send registered names is also supported. |
| 1.3.6.1.4.1.2.6.2.13.1.4 | NodeibmappnPortInformation | |||
| 1.3.6.1.4.1.2.6.2.13.1.4.1 | TableibmappnNodePortTable | not-accessible | mandatory | The Port table describes the configuration and current status of the ports used by APPN. The type of DLC is included in this table as a pointer to the DLC port… |
| 1.3.6.1.4.1.2.6.2.13.1.4.1.1 | RowibmappnNodePortEntry | not-accessible | mandatory | The Port Name is used as the index to this table. |
| 1.3.6.1.4.1.2.6.2.13.1.4.1.1.1 | ColumnibmappnNodePortName | read-only | mandatory | Administratively-assigned name for this APPN port. The name can be from one to eight characters. |
| 1.3.6.1.4.1.2.6.2.13.1.4.1.1.2 | ColumnibmappnNodePortState | read-write | mandatory | Indicates the current state of this port. |
| 1.3.6.1.4.1.2.6.2.13.1.4.1.1.3 | ColumnibmappnNodePortDlcType | read-only | mandatory | The type of DLC interface, distinguished according to the protocol immediately 'below' this layer. |
| 1.3.6.1.4.1.2.6.2.13.1.4.1.1.4 | ColumnibmappnNodePortPortType | read-only | mandatory | Identifies the type of line used by this port. |
| 1.3.6.1.4.1.2.6.2.13.1.4.1.1.5 | ColumnibmappnNodePortSIMRIM | read-only | mandatory | Indicates whether Set Initialization Mode (SIM) and Receive Initialization Mode (RIM) are supported. |
| 1.3.6.1.4.1.2.6.2.13.1.4.1.1.6 | ColumnibmappnNodePortLsRole | read-only | mandatory | Initial role for LSs activated through this port, where 'abm' indicates asynchronous balance mode. |
| 1.3.6.1.4.1.2.6.2.13.1.4.1.1.7 | ColumnibmappnNodePortMaxRcvBtuSize | read-only | mandatory | Maximum Basic Transmission Size (BTU) that a link station on this port can receive. |
| 1.3.6.1.4.1.2.6.2.13.1.4.1.1.8 | ColumnibmappnNodePortMaxIframeWindow | read-only | mandatory | Maximum number of I-frames that can be received by the XID sender before an acknowledgement is received. |
| 1.3.6.1.4.1.2.6.2.13.1.4.1.1.9 | ColumnibmappnNodePortDefLsGoodXids | read-only | mandatory | The total number of successfull XIDs that have occurred on all defined link stations on this port since the last time this port was started. |
| 1.3.6.1.4.1.2.6.2.13.1.4.1.1.10 | ColumnibmappnNodePortDefLsBadXids | read-only | mandatory | The total number of unsuccessfull XIDs that have occurred on all defined link stations on this port since the last time this port was started. |
| 1.3.6.1.4.1.2.6.2.13.1.4.1.1.11 | ColumnibmappnNodePortDynLsGoodXids | read-only | mandatory | The total number of successfull XIDs that have occurred on all dynamic link stations on this port since the last time this port was started. |
| 1.3.6.1.4.1.2.6.2.13.1.4.1.1.12 | ColumnibmappnNodePortDynLsBadXids | read-only | mandatory | The total number of unsuccessfull XIDs that have occurred on all dynamic link stations on this port since the last time this port was started. |
| 1.3.6.1.4.1.2.6.2.13.1.4.1.1.13 | ColumnibmappnNodePortSpecific | read-only | mandatory | Identifies the port specific OBJECT IDENTIFIER that can provide additional information. |
| 1.3.6.1.4.1.2.6.2.13.1.4.2 | TableibmappnNodePortIpTable | not-accessible | mandatory | Port table (TCP/IP specific). |
| 1.3.6.1.4.1.2.6.2.13.1.4.2.1 | RowibmappnNodePortIpEntry | not-accessible | mandatory | The IP Name is used as the index to this table. |
| 1.3.6.1.4.1.2.6.2.13.1.4.2.1.1 | ColumnibmappnNodePortIpName | read-only | mandatory | Administratively-assigned name for this APPN port. The name can be from one to eight characters. |
| 1.3.6.1.4.1.2.6.2.13.1.4.2.1.2 | ColumnibmappnNodePortIpPortNum | read-only | mandatory | Local TCP/IP port number. |
| 1.3.6.1.4.1.2.6.2.13.1.4.3 | TableibmappnNodePortDlsTable | not-accessible | mandatory | Port table (DLS specific). |
| 1.3.6.1.4.1.2.6.2.13.1.4.3.1 | RowibmappnNodePortDlsEntry | not-accessible | mandatory | The DLS Name is used as the index to this table. |
| 1.3.6.1.4.1.2.6.2.13.1.4.3.1.1 | ColumnibmappnNodePortDlsName | read-only | mandatory | Administratively-assigned name for this APPN DLS port. The name can be from one to eight characters. |
| 1.3.6.1.4.1.2.6.2.13.1.4.3.1.2 | ColumnibmappnNodePortDlsMac | read-only | mandatory | Local DLS MAC address. |
| 1.3.6.1.4.1.2.6.2.13.1.4.3.1.3 | ColumnibmappnNodePortDlsSap | read-only | mandatory | Local DLS Sap address. |
| 1.3.6.1.4.1.2.6.2.13.1.4.4 | TableibmappnNodePortTrTable | not-accessible | mandatory | Port table (Token Ring specific). |
| 1.3.6.1.4.1.2.6.2.13.1.4.4.1 | RowibmappnNodePortTrEntry | not-accessible | mandatory | The TR Name is used as the index to this table. |
| 1.3.6.1.4.1.2.6.2.13.1.4.4.1.1 | ColumnibmappnNodePortTrName | read-only | mandatory | Administratively-assigned name for this APPN port. The name can be from one to eight characters. |
| 1.3.6.1.4.1.2.6.2.13.1.4.4.1.2 | ColumnibmappnNodePortTrMac | read-only | mandatory | Local Token Ring MAC address. |
| 1.3.6.1.4.1.2.6.2.13.1.4.4.1.3 | ColumnibmappnNodePortTrSap | read-only | mandatory | Local Token Ring Sap address. |
| 1.3.6.1.4.1.2.6.2.13.1.4.5 | TableibmappnNodePortDlcTraceTable | not-accessible | mandatory | Port table generic DLC trace table. |
| 1.3.6.1.4.1.2.6.2.13.1.4.5.1 | RowibmappnNodePortDlcTraceEntry | not-accessible | mandatory | The Port name and a dynamic integer are the index to this table. |
| 1.3.6.1.4.1.2.6.2.13.1.4.5.1.1 | ColumnibmappnNodePortDlcTracPortName | read-only | mandatory | The Port name associated with this this trace table entry. |
| 1.3.6.1.4.1.2.6.2.13.1.4.5.1.2 | ColumnibmappnNodePortDlcTracIndex | read-only | mandatory | This index value is updated every time a new trace entry is created which provides a means to retrieve only the updated entries and also provides a simple meth… |
| 1.3.6.1.4.1.2.6.2.13.1.4.5.1.3 | ColumnibmappnNodePortDlcTracDlcType | read-only | mandatory | The type of DLC interface, distinguished according to the protocol immediately 'below' this layer. |
| 1.3.6.1.4.1.2.6.2.13.1.4.5.1.4 | ColumnibmappnNodePortDlcTracLocalAddr | read-only | mandatory | Local address in format described below: other = free form DisplayString ip = ld.ld.ld.ld/2d tr = lx:lx:lx:lx:lx:lx.lx dlsw = lx:lx:lx:lx:lx:lx.lx ethernet = l… |
| 1.3.6.1.4.1.2.6.2.13.1.4.5.1.5 | ColumnibmappnNodePortDlcTracRemoteAddr | read-only | mandatory | Remote Address in the format described below: other = free form DisplayString ip = ld.ld.ld.ld/2d tr = lx:lx:lx:lx:lx:lx.lx dlsw = lx:lx:lx:lx:lx:lx.lx etherne… |
| 1.3.6.1.4.1.2.6.2.13.1.4.5.1.6 | ColumnibmappnNodePortDlcTracMsgType | read-only | mandatory | Indicates the type of trace record entry |
| 1.3.6.1.4.1.2.6.2.13.1.4.5.1.7 | ColumnibmappnNodePortDlcTracCmdType | read-only | mandatory | Indicates the command type of the trace entry. |
| 1.3.6.1.4.1.2.6.2.13.1.4.5.1.8 | ColumnibmappnNodePortDlcTracUseWan | read-only | mandatory | |
| 1.3.6.1.4.1.2.6.2.13.1.5 | NodeibmappnLinkStationInformation | |||
| 1.3.6.1.4.1.2.6.2.13.1.5.1 | TableibmappnNodeLsTable | not-accessible | mandatory | This table contains detail information about the link station configuration and current status. |
| 1.3.6.1.4.1.2.6.2.13.1.5.1.1 | RowibmappnNodeLsEntry | not-accessible | mandatory | This table is indexed by the link station name. |
| 1.3.6.1.4.1.2.6.2.13.1.5.1.1.1 | ColumnibmappnNodeLsName | read-only | mandatory | Administratively-assigned name for the link station. The name can be from one to eight characters. |
| 1.3.6.1.4.1.2.6.2.13.1.5.1.1.2 | ColumnibmappnNodeLsPortName | read-only | mandatory | Administratively-assigned name for the port. The name can be from one to eight characters. |
| 1.3.6.1.4.1.2.6.2.13.1.5.1.1.3 | ColumnibmappnNodeLsDlcType | read-only | mandatory | The type of DLC interface, distinguished according to the protocol immediately 'below' this layer. |
| 1.3.6.1.4.1.2.6.2.13.1.5.1.1.4 | ColumnibmappnNodeLsDynamic | read-only | mandatory | Identifies whether this resource is a dynamic link station. Dynamic link stations are created when adjacent nodes that have not been locally defined establish … |
| 1.3.6.1.4.1.2.6.2.13.1.5.1.1.5 | ColumnibmappnNodeLsState | read-write | mandatory | State of this link station. |
| 1.3.6.1.4.1.2.6.2.13.1.5.1.1.6 | ColumnibmappnNodeLsCpName | read-only | mandatory | Fully-qualified name of the adjacent node for this link station. The name can be from three to seventeen characters. Format is netid.cpname. |
| 1.3.6.1.4.1.2.6.2.13.1.5.1.1.7 | ColumnibmappnNodeLsTgNum | read-only | mandatory | Number associated with the TG to this link station. |
| 1.3.6.1.4.1.2.6.2.13.1.5.1.1.8 | ColumnibmappnNodeLsLimResource | read-only | mandatory | Indicates whether the link station is a limited resource. If it is, the TG is deactivated when there are no sessions. |
| 1.3.6.1.4.1.2.6.2.13.1.5.1.1.9 | ColumnibmappnNodeLsMigration | read-only | mandatory | Indicates whether this link station will be used for connections to down-level or migration partners. |
| 1.3.6.1.4.1.2.6.2.13.1.5.1.1.10 | ColumnibmappnNodeLsBlockNum | read-only | mandatory | The block number is the first three digits of the node_id. These 3 hexideimal digits identify the product and are not configurable. |
| 1.3.6.1.4.1.2.6.2.13.1.5.1.1.11 | ColumnibmappnNodeLsIdNum | read-only | mandatory | The ID number is the last 5 digits of the node_id. These 5 hexadecimal digits are administratively defined and combined with the 3 digit block number form the … |
| 1.3.6.1.4.1.2.6.2.13.1.5.1.1.12 | ColumnibmappnNodeLsCpCpSession | read-only | mandatory | Indicates whether CP-CP sessions are supported by this link station. |
| 1.3.6.1.4.1.2.6.2.13.1.5.1.1.13 | ColumnibmappnNodeLsTargetPacingCount | read-only | mandatory | Numeric value between 0 and 32767 inclusive indicating the desired pacing window size for BINDs on this TG. The number is significant only when fixed bind paci… |
| 1.3.6.1.4.1.2.6.2.13.1.5.1.1.14 | ColumnibmappnNodeLsMaxSendBtuSize | read-only | mandatory | Numeric value between 0 and 32767 inclusive indicating the desired number of bytes in a Basic Transmission Unit (BTU) that can be sent on this TG. This is an a… |
| 1.3.6.1.4.1.2.6.2.13.1.5.1.1.15 | ColumnibmappnNodeLsEffCap | read-only | mandatory | The effective capacity is an integer value that indicates the kilo bits per second. It is derived from the link bandwidth and maximum load factor with the rang… |
| 1.3.6.1.4.1.2.6.2.13.1.5.1.1.16 | ColumnibmappnNodeLsConnCost | read-only | mandatory | Cost per connect time: a value representing the relative cost per unit of time to use the TG. Range is from 0, which means no cost, to 255, which indicates max… |
| 1.3.6.1.4.1.2.6.2.13.1.5.1.1.17 | ColumnibmappnNodeLsByteCost | read-only | mandatory | Relative cost of transmitting a byte over this link. Range is from 0 (lowest cost) to 255. This is an administratively assigned value associated with the TG us… |
| 1.3.6.1.4.1.2.6.2.13.1.5.1.1.18 | ColumnibmappnNodeLsSecurity | read-only | mandatory | The security is represented as an integer with a range of 1 thru 255 with the most common values enumerated as defined above. This is an administratively assig… |
| 1.3.6.1.4.1.2.6.2.13.1.5.1.1.19 | ColumnibmappnNodeLsDelay | read-only | mandatory | Relative amount of time that it takes for a signal to travel the length of the logical link. This time is represented in micro seconds, with some of the more c… |
| 1.3.6.1.4.1.2.6.2.13.1.5.1.1.20 | ColumnibmappnNodeLsUsr1 | read-only | mandatory | First user-defined TG characteristic for this TG with a range of 0-255. This is an administratively assigned value associated with the TG using this link stati… |
| 1.3.6.1.4.1.2.6.2.13.1.5.1.1.21 | ColumnibmappnNodeLsUsr2 | read-only | mandatory | Second user-defined TG characteristic for this TG with a range of 0-255. This is an administratively assigned value associated with the TG using this link stat… |
| 1.3.6.1.4.1.2.6.2.13.1.5.1.1.22 | ColumnibmappnNodeLsUsr3 | read-only | mandatory | Third user-defined TG characteristic for this TG with a range of 0-255. This is an administratively assigned value associated with the TG using this link stati… |
| 1.3.6.1.4.1.2.6.2.13.1.5.1.1.23 | ColumnibmappnNodeLsInXidBytes | read-only | mandatory | Number of XID bytes received. |
| 1.3.6.1.4.1.2.6.2.13.1.5.1.1.24 | ColumnibmappnNodeLsInMsgBytes | read-only | mandatory | Number of message (I-frame) bytes received. |
| 1.3.6.1.4.1.2.6.2.13.1.5.1.1.25 | ColumnibmappnNodeLsInXidFrames | read-only | mandatory | Number of XID frames received. |
| 1.3.6.1.4.1.2.6.2.13.1.5.1.1.26 | ColumnibmappnNodeLsInMsgFrames | read-only | mandatory | Number of message (I-frame) frames received. |
| 1.3.6.1.4.1.2.6.2.13.1.5.1.1.27 | ColumnibmappnNodeLsOutXidBytes | read-only | mandatory | Number of XID bytes sent. |
| 1.3.6.1.4.1.2.6.2.13.1.5.1.1.28 | ColumnibmappnNodeLsOutMsgBytes | read-only | mandatory | Number of message (I-frame) bytes sent. |
| 1.3.6.1.4.1.2.6.2.13.1.5.1.1.29 | ColumnibmappnNodeLsOutXidFrames | read-only | mandatory | Number of XID frames sent. |
| 1.3.6.1.4.1.2.6.2.13.1.5.1.1.30 | ColumnibmappnNodeLsOutMsgFrames | read-only | mandatory | Number of message (I-frame) frames sent. |
| 1.3.6.1.4.1.2.6.2.13.1.5.1.1.31 | ColumnibmappnNodeLsEchoRsps | read-only | mandatory | Number of responses returned from adjacent link station. A response should be returned for each test frame sent by this node. Test frames are sent to adjacent … |
| 1.3.6.1.4.1.2.6.2.13.1.5.1.1.32 | ColumnibmappnNodeLsCurrentDelay | read-only | mandatory | The time that it took for the last test signal to be sent and returned from this link station to the adjacent links station. This time is represented in millis… |
| 1.3.6.1.4.1.2.6.2.13.1.5.1.1.33 | ColumnibmappnNodeLsMaxDelay | read-only | mandatory | The longest time it took for a test signal to be sent and returned from this link station to the adjacent links station. This time is represented in millisecon… |
| 1.3.6.1.4.1.2.6.2.13.1.5.1.1.34 | ColumnibmappnNodeLsMinDelay | read-only | mandatory | The shortest time it took for a test signal to be sent and returned from this link station to the adjacent links station. This time is represented in milliseco… |
| 1.3.6.1.4.1.2.6.2.13.1.5.1.1.35 | ColumnibmappnNodeLsMaxDelayTime | read-only | mandatory | The time (since system up in hundredth of seconds) when the longest delay occurred. This time can be used to identify when this high water mark occurred in rel… |
| 1.3.6.1.4.1.2.6.2.13.1.5.1.1.36 | ColumnibmappnNodeLsGoodXids | read-only | mandatory | The total number of successful XIDs that have occurred on this link station since the time it was started. |
| 1.3.6.1.4.1.2.6.2.13.1.5.1.1.37 | ColumnibmappnNodeLsBadXids | read-only | mandatory | The total number of unsuccessful XIDs that have occurred on this link station since the time it was started. |
| 1.3.6.1.4.1.2.6.2.13.1.5.1.1.38 | ColumnibmappnNodeLsSpecific | read-only | mandatory | Identifies the DLC specific OBJECT IDENTIFIER that can provide additional information. |
| 1.3.6.1.4.1.2.6.2.13.1.5.1.1.39 | ColumnibmappnNodeLsSubState | read-only | mandatory | State of this link station. |
| 1.3.6.1.4.1.2.6.2.13.1.5.1.1.40 | ColumnibmappnNodeLsStartTime | read-only | mandatory | The time (in hundredth of seconds) this link station has been active the last time since the time APPN was initialized. |
| 1.3.6.1.4.1.2.6.2.13.1.5.1.1.41 | ColumnibmappnNodeLsActiveTime | read-only | mandatory | The time (in hundredth of seconds) this link station has been in the active state. A zero value indicates the link station has never been active. |
| 1.3.6.1.4.1.2.6.2.13.1.5.1.1.42 | ColumnibmappnNodeLsCurrentStateTime | read-only | mandatory | The time (in hundredth of seconds) the link station is in the current state. |
| 1.3.6.1.4.1.2.6.2.13.1.5.2 | TableibmappnNodeLsIpTable | not-accessible | mandatory | Link station table (TCP/IP specific). |
| 1.3.6.1.4.1.2.6.2.13.1.5.2.1 | RowibmappnNodeLsIpEntry | not-accessible | mandatory | The IP Name is used as the index to this table. |
| 1.3.6.1.4.1.2.6.2.13.1.5.2.1.1 | ColumnibmappnNodeLsIpName | read-only | mandatory | Administratively-assigned name for this link station. The name can be from one to eight characters. |
| 1.3.6.1.4.1.2.6.2.13.1.5.2.1.2 | ColumnibmappnNodeLsIpState | read-only | mandatory | State of this link station. |
| 1.3.6.1.4.1.2.6.2.13.1.5.2.1.3 | ColumnibmappnNodeLsLocalIpAddr | read-only | mandatory | Local IP address. |
| 1.3.6.1.4.1.2.6.2.13.1.5.2.1.4 | ColumnibmappnNodeLsLocalIpPortNum | read-only | mandatory | Local TCP/IP port number. The default listening port will be administratively assigned and will dynamically change if this node initiates a session with adjace… |
| 1.3.6.1.4.1.2.6.2.13.1.5.2.1.5 | ColumnibmappnNodeLsRemoteIpAddr | read-only | mandatory | Remote IP address. |
| 1.3.6.1.4.1.2.6.2.13.1.5.2.1.6 | ColumnibmappnNodeLsRemoteIpPortNum | read-only | mandatory | Remote TCP/IP port number. |
| 1.3.6.1.4.1.2.6.2.13.1.5.3 | TableibmappnNodeLsDlsTable | not-accessible | mandatory | Ls Table (DLS specific). |
| 1.3.6.1.4.1.2.6.2.13.1.5.3.1 | RowibmappnNodeLsDlsEntry | not-accessible | mandatory | The DLS Name is used as the index to this table. |
| 1.3.6.1.4.1.2.6.2.13.1.5.3.1.1 | ColumnibmappnNodeLsDlsName | read-only | mandatory | Administratively-assigned name for this link station. The name can be from one to eight characters. |
| 1.3.6.1.4.1.2.6.2.13.1.5.3.1.2 | ColumnibmappnNodeLsDlsState | read-only | mandatory | State of this link station. |
| 1.3.6.1.4.1.2.6.2.13.1.5.3.1.3 | ColumnibmappnNodeLsLocalDlsMac | read-only | mandatory | Local MAC address. |
| 1.3.6.1.4.1.2.6.2.13.1.5.3.1.4 | ColumnibmappnNodeLsLocalDlsSap | read-only | mandatory | Local SAP address. |
| 1.3.6.1.4.1.2.6.2.13.1.5.3.1.5 | ColumnibmappnNodeLsRemoteDlsMac | read-only | mandatory | Remote MAC address. |
| 1.3.6.1.4.1.2.6.2.13.1.5.3.1.6 | ColumnibmappnNodeLsRemoteDlsSap | read-only | mandatory | Remote SAP address. |
| 1.3.6.1.4.1.2.6.2.13.1.5.4 | TableibmappnNodeLsTrTable | not-accessible | mandatory | Ls Table (Token Ring specific). |
| 1.3.6.1.4.1.2.6.2.13.1.5.4.1 | RowibmappnNodeLsTrEntry | not-accessible | mandatory | The TR Name is used as the index to this table. |
| 1.3.6.1.4.1.2.6.2.13.1.5.4.1.1 | ColumnibmappnNodeLsTrName | read-only | mandatory | Administratively-assigned name for this link station. The name can be from one to eight characters. |
| 1.3.6.1.4.1.2.6.2.13.1.5.4.1.2 | ColumnibmappnNodeLsTrState | read-only | mandatory | State of this link station. |
| 1.3.6.1.4.1.2.6.2.13.1.5.4.1.3 | ColumnibmappnNodeLsLocalTrMac | read-only | mandatory | Local MAC address. |
| 1.3.6.1.4.1.2.6.2.13.1.5.4.1.4 | ColumnibmappnNodeLsLocalTrSap | read-only | mandatory | Local SAP address. |
| 1.3.6.1.4.1.2.6.2.13.1.5.4.1.5 | ColumnibmappnNodeLsRemoteTrMac | read-only | mandatory | Remote MAC address. |
| 1.3.6.1.4.1.2.6.2.13.1.5.4.1.6 | ColumnibmappnNodeLsRemoteTrSap | read-only | mandatory | Remote SAP address. |
| 1.3.6.1.4.1.2.6.2.13.1.5.5 | TableibmappnNodeLsStatusTable | not-accessible | mandatory | This table contains information related to exceptional and potential exceptional conditions that occur during the activation, XID exchange, and termination of … |
| 1.3.6.1.4.1.2.6.2.13.1.5.5.1 | RowibmappnNodeLsStatusEntry | not-accessible | mandatory | This table is indexed by the LsStatusIndex, which is an integer that is continuously updated until it eventually wraps. This provides the management station th… |
| 1.3.6.1.4.1.2.6.2.13.1.5.5.1.1 | ColumnibmappnNodeLsStatusIndex | read-only | mandatory | Table index. The value of the index begins at zero and is incremented up to a maximum value of 2**31-1 (2,147,483,647) before wrapping. |
| 1.3.6.1.4.1.2.6.2.13.1.5.5.1.2 | ColumnibmappnNodeLsStatusTime | read-only | mandatory | Time (in hundreds of a second) since this node was last initialized. |
| 1.3.6.1.4.1.2.6.2.13.1.5.5.1.3 | ColumnibmappnNodeLsStatusLsName | read-only | mandatory | Administratively-assigned name for this link station. |
| 1.3.6.1.4.1.2.6.2.13.1.5.5.1.4 | ColumnibmappnNodeLsStatusCpName | read-only | mandatory | Administratively-assigned fully-qualified name of the adjacent node partner. This will be provided when the adjacent node has been defined at this node or when… |
| 1.3.6.1.4.1.2.6.2.13.1.5.5.1.5 | ColumnibmappnNodeLsStatusNodeId | read-only | mandatory | Adjacent Node id |
| 1.3.6.1.4.1.2.6.2.13.1.5.5.1.6 | ColumnibmappnNodeLsStatusTgNum | read-only | mandatory | Number associated with the TG to this link station with a range from 0 to 256. A value of 256 indicates the tg number has not been negotiated and is unknown at… |
| 1.3.6.1.4.1.2.6.2.13.1.5.5.1.7 | ColumnibmappnNodeLsStatusGeneralSense | read-only | mandatory | The error sense code associated with the start sequence of activation of a link up to the beginning of the XID sequence. |
| 1.3.6.1.4.1.2.6.2.13.1.5.5.1.8 | ColumnibmappnNodeLsStatusNofRetry | read-only | mandatory | Indicates whether NOF will retry the start request to activate the link. |
| 1.3.6.1.4.1.2.6.2.13.1.5.5.1.9 | ColumnibmappnNodeLsStatusEndSense | read-only | mandatory | The sense code associated with the termination of the link connection to adjacent node. This includes all sense information included in the disconnect recieved… |
| 1.3.6.1.4.1.2.6.2.13.1.5.5.1.10 | ColumnibmappnNodeLsStatusXidLocalSense | read-only | mandatory | The error sense code associated with the rejection of the XID. |
| 1.3.6.1.4.1.2.6.2.13.1.5.5.1.11 | ColumnibmappnNodeLsStatusXidRemoteSense | read-only | mandatory | The error sense code adjacent node returned to this node indicating the reason the XID was rejected. |
| 1.3.6.1.4.1.2.6.2.13.1.5.5.1.12 | ColumnibmappnNodeLsStatusXidByteInError | read-only | mandatory | This identifies the actual byte in the XID that caused the error. The value of zero (0) indicates that the variable has no meaning. |
| 1.3.6.1.4.1.2.6.2.13.1.5.5.1.13 | ColumnibmappnNodeLsStatusXidBitInError | read-only | mandatory | This identifies the actual bit within the error byte of the XID. This only has meaning when the byte in error is greater than zero. |
| 1.3.6.1.4.1.2.6.2.13.1.5.5.1.14 | ColumnibmappnNodeLsStatusDlcType | read-only | mandatory | This identifies DLC type that was being used when error occurred. This also is used to the format of the local and remote address provided. other = free form D… |
| 1.3.6.1.4.1.2.6.2.13.1.5.5.1.15 | ColumnibmappnNodeLsStatusLocalAddr | read-only | mandatory | This contains a displayable string that identifies the DLC type and appropriate address. See DlcType above for details of the format. |
| 1.3.6.1.4.1.2.6.2.13.1.5.5.1.16 | ColumnibmappnNodeLsStatusRemoteAddr | read-only | mandatory | This contains a displayable string that identifies the DLC type and appropriate address. See DlcType above for details of the format. |
| 1.3.6.1.4.1.2.6.2.13.1.6 | NodeibmappnSnmpInformation | |||
| 1.3.6.1.4.1.2.6.2.13.1.6.1 | ScalaribmappnSnmpInPkts | read-only | mandatory | Total number of messages delivered to the APPN SNMP sub-agent. |
| 1.3.6.1.4.1.2.6.2.13.1.6.2 | ScalaribmappnSnmpInGetRequests | read-only | mandatory | Total number of GET requests delivered to the APPN SNMP sub-agent. |
| 1.3.6.1.4.1.2.6.2.13.1.6.3 | ScalaribmappnSnmpInGetNexts | read-only | mandatory | Total number of GETNEXT requests delivered to the APPN SNMP sub-agent. |
| 1.3.6.1.4.1.2.6.2.13.1.6.4 | ScalaribmappnSnmpInSetRequests | read-only | mandatory | Total number of SET requests delivered to the APPN SNMP sub-agent. |
| 1.3.6.1.4.1.2.6.2.13.1.6.5 | ScalaribmappnSnmpInTotalVars | read-only | mandatory | Total number of VARIABLES included in both GET and GETNEXT requests to the APPN SNMP sub-agent. |
| 1.3.6.1.4.1.2.6.2.13.1.6.6 | ScalaribmappnSnmpInGetVars | read-only | mandatory | Total number of VARIBLES included in all GET requests to the APPN SNMP sub-agent. |
| 1.3.6.1.4.1.2.6.2.13.1.6.7 | ScalaribmappnSnmpInGetNextVars | read-only | mandatory | Total number of VARIABLES included in all GETNEXT requests to the APPN SNMP sub-agent. |
| 1.3.6.1.4.1.2.6.2.13.1.6.8 | ScalaribmappnSnmpInSetVars | read-only | mandatory | Total number of VARIBLES included in all SET requests to the APPN SNMP sub-agent. |
| 1.3.6.1.4.1.2.6.2.13.1.6.9 | ScalaribmappnSnmpOutNoSuchNames | read-only | mandatory | Total number of VARIABLES that could not be found by the APPN SNMP sub-agent. |
| 1.3.6.1.4.1.2.6.2.13.1.6.10 | ScalaribmappnSnmpOutGenErrs | read-only | mandatory | Total number of undefined errors that occurred processing SNMP request to the APPN SNMP sub-agent. |
| 1.3.6.1.4.1.2.6.2.13.1.7 | NodeibmappnMemoryUse | |||
| 1.3.6.1.4.1.2.6.2.13.1.7.1 | ScalaribmappnMemorySize | read-only | mandatory | Size of the shared storage segment, as obtained by storage management from the underlying operating system. |
| 1.3.6.1.4.1.2.6.2.13.1.7.2 | ScalaribmappnMemoryUsed | read-only | mandatory | Number of bytes in the segment that are currently allocated to process. |
| 1.3.6.1.4.1.2.6.2.13.1.7.3 | ScalaribmappnMemoryWarnThresh | read-only | mandatory | Allocation threshold beyond which storage management considers the storage resources to be constrained. |
| 1.3.6.1.4.1.2.6.2.13.1.7.4 | ScalaribmappnMemoryCritThresh | read-only | mandatory | Allocation threshold beyond which storage management considers the storage resources to be critically constrained. |
| 1.3.6.1.4.1.2.6.2.13.1.8 | NodeibmappnXidInformation | |||
| 1.3.6.1.4.1.2.6.2.13.1.8.1 | ScalaribmappnNodeDefLsGoodXids | read-only | mandatory | The current number of successfull XIDs that have occurred on all defined link stations since the last time this node was initialized. |
| 1.3.6.1.4.1.2.6.2.13.1.8.2 | ScalaribmappnNodeDefLsBadXids | read-only | mandatory | The current number of unsuccessfull XIDs that have occurred on all defined link stations since the last time this node was initialized. |
| 1.3.6.1.4.1.2.6.2.13.1.8.3 | ScalaribmappnNodeDynLsGoodXids | read-only | mandatory | The current number of successfull XIDs that have occurred on all dynamic link stations since the last time this node was initialized. |
| 1.3.6.1.4.1.2.6.2.13.1.8.4 | ScalaribmappnNodeDynLsBadXids | read-only | mandatory | The current number of unsuccessfull XIDs that have occurred on all dynamic link stations since the last time this node was initialized. |
| 1.3.6.1.4.1.2.6.2.13.2 | NodeibmappnNn | |||
| 1.3.6.1.4.1.2.6.2.13.2.1 | NodeibmappnNnTopo | |||
| 1.3.6.1.4.1.2.6.2.13.2.1.1 | ScalaribmappnNnTopoMaxNodes | read-only | mandatory | Maximum number of nodes allowed in the APPN topology database This administratively assigned value must be equal to or greater than the maximum total number of… |
| 1.3.6.1.4.1.2.6.2.13.2.1.2 | ScalaribmappnNnTopoCurNumNodes | read-only | mandatory | Current number of nodes in this node's topology database. If this value exceeds the maximum number of nodes allowed (NnTopoMaxNodes), APPN alert CPDB002 is iss… |
| 1.3.6.1.4.1.2.6.2.13.2.1.3 | ScalaribmappnNnTopoInTdus | read-only | mandatory | Total number of TDUs received from all adjacent NN since last initialization. |
| 1.3.6.1.4.1.2.6.2.13.2.1.4 | ScalaribmappnNnTopoOutTdus | read-only | mandatory | Total number of TDUs built by this node to be sent to all adjacent NN since last initialization. |
| 1.3.6.1.4.1.2.6.2.13.2.1.5 | ScalaribmappnNnTopoNodeLowRsns | read-only | mandatory | Total number of topology node updates received by this node with a RSN less than the current RSN. Both even and odd RSN are included in this count. These TDUs … |
| 1.3.6.1.4.1.2.6.2.13.2.1.6 | ScalaribmappnNnTopoNodeEqualRsns | read-only | mandatory | Total number of topology node updates received by this node with a RSN equal to the current RSN. Both even and odd RSN are included in this count. These TDUs a… |
| 1.3.6.1.4.1.2.6.2.13.2.1.7 | ScalaribmappnNnTopoNodeGoodHighRsns | read-only | mandatory | Total number of topology node updates received by this node with a RSN greater than the current RSN. This results in updating this nodes topology and broadcast… |
| 1.3.6.1.4.1.2.6.2.13.2.1.8 | ScalaribmappnNnTopoNodeBadHighRsns | read-only | mandatory | Total number of topology node updates received by this node with an odd RSN greater than the current RSN. These updates represent a topology inconsistency dete… |
| 1.3.6.1.4.1.2.6.2.13.2.1.9 | ScalaribmappnNnTopoNodeStateUpdates | read-only | mandatory | Total number of topology Node records built as a result of internally detected node state changes that affect APPN topology and routing. Updates are sent via T… |
| 1.3.6.1.4.1.2.6.2.13.2.1.10 | ScalaribmappnNnTopoNodeErrors | read-only | mandatory | Total number of topology node records inconsistencies detected by this node. This occurs when this node attempts to update its topology database and detects a … |
| 1.3.6.1.4.1.2.6.2.13.2.1.11 | ScalaribmappnNnTopoNodeTimerUpdates | read-only | mandatory | Total number of topology node records built for this node's resource due to timer updates. Updates are sent via TDUs to all adjacent network nodes. These updat… |
| 1.3.6.1.4.1.2.6.2.13.2.1.12 | ScalaribmappnNnTopoNodePurges | read-only | mandatory | Total number of topology node records purged from this node's topology database. This occurs when a node has not been updated in a specified amount of time. Th… |
| 1.3.6.1.4.1.2.6.2.13.2.1.13 | ScalaribmappnNnTopoTgLowRsns | read-only | mandatory | Total number of topology TG updates received by this node with a RSN less than the current RSN. Both even and odd RSN are included in this count. These TDUs ar… |
| 1.3.6.1.4.1.2.6.2.13.2.1.14 | ScalaribmappnNnTopoTgEqualRsns | read-only | mandatory | Total number of topology TG updates received by this node with a RSN equal to the current RSN. Both even and odd RSN are included in this count. These TDUs are… |
| 1.3.6.1.4.1.2.6.2.13.2.1.15 | ScalaribmappnNnTopoTgGoodHighRsns | read-only | mandatory | Total number of topology TG updates received by this node with a RSN greater than the current RSN. This results in updating this nodes topology and broadcastin… |
| 1.3.6.1.4.1.2.6.2.13.2.1.16 | ScalaribmappnNnTopoTgBadHighRsns | read-only | mandatory | Total number of topology TG updates received by this node with an odd RSN greater than the current RSN. These updates represent a topology inconsistency detect… |
| 1.3.6.1.4.1.2.6.2.13.2.1.17 | ScalaribmappnNnTopoTgStateUpdates | read-only | mandatory | Total number of topology TG records built as a result of internally detected node state changes that affect APPN topology and routing. Updates are sent via TDU… |
| 1.3.6.1.4.1.2.6.2.13.2.1.18 | ScalaribmappnNnTopoTgErrors | read-only | mandatory | Total number of topology TG records inconsistencies detected by this node. This occurs when this node attempts to update its topology database and detects a da… |
| 1.3.6.1.4.1.2.6.2.13.2.1.19 | ScalaribmappnNnTopoTgTimerUpdates | read-only | mandatory | Total number of topology TG records built for this node's resource due to timer updates. Updates are sent via TDUs to all adjacent network nodes. These updates… |
| 1.3.6.1.4.1.2.6.2.13.2.1.20 | ScalaribmappnNnTopoTgPurges | read-only | mandatory | Total number of topology TG records purged from this node's topology database. This occurs when a TG has not been updated in a specified amount of time. The ow… |
| 1.3.6.1.4.1.2.6.2.13.2.1.21 | ScalaribmappnNnTopoTotalRouteCalcs | read-only | mandatory | Number of routes calculated for all class of services since the last initialization. |
| 1.3.6.1.4.1.2.6.2.13.2.1.22 | ScalaribmappnNnTopoTotalRouteRejs | read-only | mandatory | Number of route requests for all class of services that could not be calculated since last initialization. |
| 1.3.6.1.4.1.2.6.2.13.2.1.23 | TableibmappnNnTopoRouteTable | not-accessible | mandatory | Table containing an entry for every Class of Service that it has calculated a route for. |
| 1.3.6.1.4.1.2.6.2.13.2.1.23.1 | RowibmappnNnTopoRouteEntry | not-accessible | mandatory | The Class of Service name is the index for this table. |
| 1.3.6.1.4.1.2.6.2.13.2.1.23.1.1 | ColumnibmappnNnTopoRouteCos | read-only | mandatory | The Class of Service for the route. |
| 1.3.6.1.4.1.2.6.2.13.2.1.23.1.2 | ColumnibmappnNnTopoRouteTrees | read-only | mandatory | Number of routes tree caches built for this Class of Service since the last initialization. |
| 1.3.6.1.4.1.2.6.2.13.2.1.23.1.3 | ColumnibmappnNnTopoRouteCalcs | read-only | mandatory | Number of routes calculated since last initialization. |
| 1.3.6.1.4.1.2.6.2.13.2.1.23.1.4 | ColumnibmappnNnTopoRouteRejs | read-only | mandatory | Number of route requests that could not be calculated since last initialization. |
| 1.3.6.1.4.1.2.6.2.13.2.2 | TableibmappnNnAdjNodeTable | not-accessible | mandatory | Table containing an entry for every node. The information kept in this table is the last FRSN sent and received, the status of the CP-CP sessions, and a gauge … |
| 1.3.6.1.4.1.2.6.2.13.2.2.1 | RowibmappnNnAdjNodeEntry | not-accessible | mandatory | The adjacent node name is the index for this table. |
| 1.3.6.1.4.1.2.6.2.13.2.2.1.1 | ColumnibmappnNnAdjNodeAdjName | read-only | mandatory | An administratively-assigned fully-qualified name of this node's adjacent network node. |
| 1.3.6.1.4.1.2.6.2.13.2.2.1.2 | ColumnibmappnNnAdjNodeCpCpSessStatus | read-only | mandatory | Indicates the state of CP-CP sessions between this node and adjacent network and end nodes. Incative indicates no CP-CP sessions exists between this node and t… |
| 1.3.6.1.4.1.2.6.2.13.2.2.1.3 | ColumnibmappnNnAdjNodeOutOfSeqTdus | read-only | mandatory | Number of out of sequence Topology Database Updates (TDUs). In a quiesced state, this value is zero. In normal operation, the value varies depending on the net… |
| 1.3.6.1.4.1.2.6.2.13.2.2.1.4 | ColumnibmappnNnAdjNodeLastFrsnSent | read-only | mandatory | Flow reduction sequence numbers (FRSNs) are associated with Topology Database Updates (TDUs) and are unique only within each APPN network node. A TDU can be as… |
| 1.3.6.1.4.1.2.6.2.13.2.2.1.5 | ColumnibmappnNnAdjNodeLastFrsnRcvd | read-only | mandatory | Flow reduction sequence numbers (FRSNs) are associated with Topology Database Updates (TDUs) and are unique only within each APPN network node. A TDU can be as… |
| 1.3.6.1.4.1.2.6.2.13.2.3 | NodeibmappnNnTopology | |||
| 1.3.6.1.4.1.2.6.2.13.2.3.1 | TableibmappnNnTopologyTable | not-accessible | mandatory | Portion of the APPN routing table that describes all of the APPN network nodes and virtual nodes known to this node. |
| 1.3.6.1.4.1.2.6.2.13.2.3.1.1 | RowibmappnNnTopologyEntry | not-accessible | mandatory | The fully-qualified node name is used to index this table. |
| 1.3.6.1.4.1.2.6.2.13.2.3.1.1.1 | ColumnibmappnNnNodeName | read-only | mandatory | Administratively-assigned network name that is locally defined at each network node in the format NETID.CPNAME. |
| 1.3.6.1.4.1.2.6.2.13.2.3.1.1.2 | ColumnibmappnNnNodeFrsn | read-only | mandatory | Flow reduction sequence numbers (FRSNs) are associated with Topology Database Updates (TDUs) and are unique only within each APPN network node. A TDU can be as… |
| 1.3.6.1.4.1.2.6.2.13.2.3.1.1.3 | ColumnibmappnNnNodeEntryTimeLeft | read-only | mandatory | Number of days before deletion of this network node entry. Range is 0-31. |
| 1.3.6.1.4.1.2.6.2.13.2.3.1.1.4 | ColumnibmappnNnNodeType | read-only | mandatory | Type of APPN node. |
| 1.3.6.1.4.1.2.6.2.13.2.3.1.1.5 | ColumnibmappnNnNodeRsn | read-only | mandatory | Resource sequence number that is assigned and controlled by the network node that owns this resource. This is always an even 32-bit number unless an error has … |
| 1.3.6.1.4.1.2.6.2.13.2.3.1.1.6 | ColumnibmappnNnNodeRouteAddResist | read-only | mandatory | Route addition resistance indicates the relative desirability of using this node for intermediate session traffic. The value, which can be any integer 0-255, i… |
| 1.3.6.1.4.1.2.6.2.13.2.3.1.1.7 | ColumnibmappnNnNodeCongested | read-only | mandatory | Indicates whether this node is congested. This node is not be included in route selection by other nodes when this congestion exists. |
| 1.3.6.1.4.1.2.6.2.13.2.3.1.1.8 | ColumnibmappnNnNodeIsrDepleted | read-only | mandatory | Indicates whether intermediate session routing resources are depleted. This node is not included in intermediate route selection by other nodes when resources … |
| 1.3.6.1.4.1.2.6.2.13.2.3.1.1.9 | ColumnibmappnNnNodeEndptDepleted | read-only | mandatory | Indicates whether session endpoint resources are depleted. |
| 1.3.6.1.4.1.2.6.2.13.2.3.1.1.10 | ColumnibmappnNnNodeQuiescing | read-only | mandatory | Indicates whether the node is quiescing. This node is not included in route selection by other nodes when the node is quiescing. |
| 1.3.6.1.4.1.2.6.2.13.2.3.1.1.11 | ColumnibmappnNnNodeGateway | read-only | mandatory | Indicates whether the node provide gateway functions. |
| 1.3.6.1.4.1.2.6.2.13.2.3.1.1.12 | ColumnibmappnNnNodeCentralDirectory | read-only | mandatory | Indicates whether the node is central directory. |
| 1.3.6.1.4.1.2.6.2.13.2.3.1.1.13 | ColumnibmappnNnNodeIsr | read-only | mandatory | Indicates whether the node supports intermediate session routing (ISR). |
| 1.3.6.1.4.1.2.6.2.13.2.3.1.1.14 | ColumnibmappnNnNodeChainSupport | read-only | mandatory | Indicates whether the node supports chaining. |
| 1.3.6.1.4.1.2.6.2.13.2.3.2 | TableibmappnNnTgTopologyTable | not-accessible | mandatory | Portion of the APPN topology database that describes all of the APPN transmissions groups used by the APPN network nodes. |
| 1.3.6.1.4.1.2.6.2.13.2.3.2.1 | RowibmappnNnTgTopologyEntry | not-accessible | mandatory | This table requires three indexes to provide a unique index. The indexes are the owning or originating CPname, the destination CPname, and the TG number. |
| 1.3.6.1.4.1.2.6.2.13.2.3.2.1.1 | ColumnibmappnNnTgOwner | read-only | mandatory | Administratively-assigned name for the originating node for this TG. The format is NETID.CPNAME and is the same name specified in the node table. |
| 1.3.6.1.4.1.2.6.2.13.2.3.2.1.2 | ColumnibmappnNnTgDest | read-only | mandatory | Administratively-assigned fully-qualified network name for the destination node for this TG. |
| 1.3.6.1.4.1.2.6.2.13.2.3.2.1.3 | ColumnibmappnNnTgNum | read-only | mandatory | Number associated with this transmission group. Range is 0-255. |
| 1.3.6.1.4.1.2.6.2.13.2.3.2.1.4 | ColumnibmappnNnTgFrsn | read-only | mandatory | Flow reduction sequence numbers (FRSNs) are associated with Topology Database Updates (TDUs) and are unique only within each APPN network node. A TDU can be as… |
| 1.3.6.1.4.1.2.6.2.13.2.3.2.1.5 | ColumnibmappnNnTgEntryTimeLeft | read-only | mandatory | Number of days before deletion of this network node TG entry. Range is 0-31. |
| 1.3.6.1.4.1.2.6.2.13.2.3.2.1.6 | ColumnibmappnNnTgDestVirtual | read-only | mandatory | Indicates whether the destination node is a virtual node. |
| 1.3.6.1.4.1.2.6.2.13.2.3.2.1.7 | ColumnibmappnNnTgDlcData | read-only | mandatory | DLC specific data related to the link connection network. Token-Ring - MAC/SAP X.25 Switched - dial digits X.21 Switched - dial digits Circuit Swtch - dial dig… |
| 1.3.6.1.4.1.2.6.2.13.2.3.2.1.8 | ColumnibmappnNnTgRsn | read-only | mandatory | Current owning node's resource sequence number for this resource. |
| 1.3.6.1.4.1.2.6.2.13.2.3.2.1.9 | ColumnibmappnNnTgOperational | read-only | mandatory | Indicates whether the transmission group is operational. |
| 1.3.6.1.4.1.2.6.2.13.2.3.2.1.10 | ColumnibmappnNnTgQuiescing | read-only | mandatory | Indicates whether the transmission group is quiescing. |
| 1.3.6.1.4.1.2.6.2.13.2.3.2.1.11 | ColumnibmappnNnTgCpCpSession | read-only | mandatory | Indicates whether CP-CP sessions are supported on this TG. |
| 1.3.6.1.4.1.2.6.2.13.2.3.2.1.12 | ColumnibmappnNnTgEffCap | read-only | mandatory | The effective capacity is an integer value that indicates the kilo bits per second. It is derived from the link bandwidth and maximum load factor with the rang… |
| 1.3.6.1.4.1.2.6.2.13.2.3.2.1.13 | ColumnibmappnNnTgConnCost | read-only | mandatory | Cost per connect time: a value representing the relative cost per unit of time to use the TG. Range is from 0, which means no cost, to 255, which indicates max… |
| 1.3.6.1.4.1.2.6.2.13.2.3.2.1.14 | ColumnibmappnNnTgByteCost | read-only | mandatory | Relative cost of transmitting a byte over this link. Range is from 0 (lowest cost) to 255. This is an administratively assigned value associated with this TG. |
| 1.3.6.1.4.1.2.6.2.13.2.3.2.1.15 | ColumnibmappnNnTgSecurity | read-only | mandatory | The security is represented as an integer with a range of 1 thru 255 with the most common values enumerated as defined above. This is an administratively assig… |
| 1.3.6.1.4.1.2.6.2.13.2.3.2.1.16 | ColumnibmappnNnTgDelay | read-only | mandatory | Relative amount of time that it takes for a signal to travel the length of the logical link. This time is represented in micro seconds, with some of the more c… |
| 1.3.6.1.4.1.2.6.2.13.2.3.2.1.17 | ColumnibmappnNnTgModemClass | read-only | mandatory | This is used to have multiple images for a connection network. For a connection network it is the same as in the TG vector; for a non-connection network it is … |
| 1.3.6.1.4.1.2.6.2.13.2.3.2.1.18 | ColumnibmappnNnTgUsr1 | read-only | mandatory | First user-defined TG characteristic for this TG with a range of 0-255. This is an administratively assigned value associated with this TG. |
| 1.3.6.1.4.1.2.6.2.13.2.3.2.1.19 | ColumnibmappnNnTgUsr2 | read-only | mandatory | Second user-defined TG characteristic for this TG with a range of 0-255. This is an administratively assigned value associated with this TG. |
| 1.3.6.1.4.1.2.6.2.13.2.3.2.1.20 | ColumnibmappnNnTgUsr3 | read-only | mandatory | Third user-defined TG characteristic for this TG with a range of 0-255. This is an administratively assigned value associated with this TG. |
| 1.3.6.1.4.1.2.6.2.13.2.3.3 | TableibmappnNnTopologyFRTable | not-accessible | mandatory | Portion of the APPN routing table that describes all of the APPN network nodes and virtual nodes known to this node. |
| 1.3.6.1.4.1.2.6.2.13.2.3.3.1 | RowibmappnNnTopologyFREntry | not-accessible | mandatory | The fully-qualified node name is used to index this table. |
| 1.3.6.1.4.1.2.6.2.13.2.3.3.1.1 | ColumnibmappnNnNodeFRName | read-only | mandatory | Administratively-assigned network name that is locally defined at each network node in the format NETID.CPNAME. |
| 1.3.6.1.4.1.2.6.2.13.2.3.3.1.2 | ColumnibmappnNnNodeFRFrsn | read-only | mandatory | Flow reduction sequence numbers (FRSNs) are associated with Topology Database Updates (TDUs) and are unique only within each APPN network node. A TDU can be as… |
| 1.3.6.1.4.1.2.6.2.13.2.3.3.1.3 | ColumnibmappnNnNodeFREntryTimeLeft | read-only | mandatory | Number of days before deletion of this network node entry. Range is 0-31. |
| 1.3.6.1.4.1.2.6.2.13.2.3.3.1.4 | ColumnibmappnNnNodeFRType | read-only | mandatory | Type of APPN node. |
| 1.3.6.1.4.1.2.6.2.13.2.3.3.1.5 | ColumnibmappnNnNodeFRRsn | read-only | mandatory | Resource sequence number that is assigned and controlled by the network node that owns this resource. This is always an even 32-bit number unless an error has … |
| 1.3.6.1.4.1.2.6.2.13.2.3.3.1.6 | ColumnibmappnNnNodeFRRouteAddResist | read-only | mandatory | Route addition resistance indicates the relative desirability of using this node for intermediate session traffic. The value, which can be any integer 0-255, i… |
| 1.3.6.1.4.1.2.6.2.13.2.3.3.1.7 | ColumnibmappnNnNodeFRCongested | read-only | mandatory | Indicates whether this node is congested. This node is not be included in route selection by other nodes when this congestion exists. |
| 1.3.6.1.4.1.2.6.2.13.2.3.3.1.8 | ColumnibmappnNnNodeFRIsrDepleted | read-only | mandatory | Indicates whether intermediate session routing resources are depleted. This node is not included in intermediate route selection by other nodes when resources … |
| 1.3.6.1.4.1.2.6.2.13.2.3.3.1.9 | ColumnibmappnNnNodeFREndptDepleted | read-only | mandatory | Indicates whether session endpoint resources are depleted. |
| 1.3.6.1.4.1.2.6.2.13.2.3.3.1.10 | ColumnibmappnNnNodeFRQuiescing | read-only | mandatory | Indicates whether the node is quiescing. This node is not included in route selection by other nodes when the node is quiescing. |
| 1.3.6.1.4.1.2.6.2.13.2.3.3.1.11 | ColumnibmappnNnNodeFRGateway | read-only | mandatory | Indicates whether the node provide gateway functions. |
| 1.3.6.1.4.1.2.6.2.13.2.3.3.1.12 | ColumnibmappnNnNodeFRCentralDirectory | read-only | mandatory | Indicates whether the node is central directory. |
| 1.3.6.1.4.1.2.6.2.13.2.3.3.1.13 | ColumnibmappnNnNodeFRIsr | read-only | mandatory | Indicates whether the node supports intermediate session routing (ISR). |
| 1.3.6.1.4.1.2.6.2.13.2.3.3.1.14 | ColumnibmappnNnNodeFRChainSupport | read-only | mandatory | Indicates whether the node supports chaining. |
| 1.3.6.1.4.1.2.6.2.13.2.3.4 | TableibmappnNnTgTopologyFRTable | not-accessible | mandatory | Portion of the APPN topology database that describes all of the APPN transmissions groups used by the APPN network nodes. |
| 1.3.6.1.4.1.2.6.2.13.2.3.4.1 | RowibmappnNnTgTopologyFREntry | not-accessible | mandatory | This table is indexed by four columns: FRSN, TG owner fully-qualified node name, TG destination fully-qualified node name, TG number. |
| 1.3.6.1.4.1.2.6.2.13.2.3.4.1.1 | ColumnibmappnNnTgFROwner | read-only | mandatory | Administratively-assigned name for the originating node for this TG. The format is NETID.CPNAME and is the same name specified in the node table. |
| 1.3.6.1.4.1.2.6.2.13.2.3.4.1.2 | ColumnibmappnNnTgFRDest | read-only | mandatory | Administratively-assigned fully-qualified network name for the destination node for this TG. |
| 1.3.6.1.4.1.2.6.2.13.2.3.4.1.3 | ColumnibmappnNnTgFRNum | read-only | mandatory | Number associated with this transmission group. Range is 0-255. |
| 1.3.6.1.4.1.2.6.2.13.2.3.4.1.4 | ColumnibmappnNnTgFRFrsn | read-only | mandatory | Flow reduction sequence numbers (FRSNs) are associated with Topology Database Updates (TDUs) and are unique only within each APPN network node. A TDU can be as… |
| 1.3.6.1.4.1.2.6.2.13.2.3.4.1.5 | ColumnibmappnNnTgFREntryTimeLeft | read-only | mandatory | Number of days before deletion of this network node TG entry. Range is 0-31. |
| 1.3.6.1.4.1.2.6.2.13.2.3.4.1.6 | ColumnibmappnNnTgFRDestVirtual | read-only | mandatory | Indicates whether the destination node is a virtual node. |
| 1.3.6.1.4.1.2.6.2.13.2.3.4.1.7 | ColumnibmappnNnTgFRDlcData | read-only | mandatory | DLC specific data related to the link connection network. Token-Ring - MAC/SAP X.25 Switched - dial digits X.21 Switched - dial digits Circuit Swtch - dial dig… |
| 1.3.6.1.4.1.2.6.2.13.2.3.4.1.8 | ColumnibmappnNnTgFRRsn | read-only | mandatory | Current owning node's resource sequence number for this resource. |
| 1.3.6.1.4.1.2.6.2.13.2.3.4.1.9 | ColumnibmappnNnTgFROperational | read-only | mandatory | Indicates whether the transmission group is operational. |
| 1.3.6.1.4.1.2.6.2.13.2.3.4.1.10 | ColumnibmappnNnTgFRQuiescing | read-only | mandatory | Indicates whether the transmission group is quiescing. |
| 1.3.6.1.4.1.2.6.2.13.2.3.4.1.11 | ColumnibmappnNnTgFRCpCpSession | read-only | mandatory | Indicates whether CP-CP sessions are supported on this TG. |
| 1.3.6.1.4.1.2.6.2.13.2.3.4.1.12 | ColumnibmappnNnTgFREffCap | read-only | mandatory | The effective capacity is an integer value that indicates the kilo bits per second. It is derived from the link bandwidth and maximum load factor with the rang… |
| 1.3.6.1.4.1.2.6.2.13.2.3.4.1.13 | ColumnibmappnNnTgFRConnCost | read-only | mandatory | Cost per connect time: a value representing the relative cost per unit of time to use the TG. Range is from 0, which means no cost, to 255, which indicates max… |
| 1.3.6.1.4.1.2.6.2.13.2.3.4.1.14 | ColumnibmappnNnTgFRByteCost | read-only | mandatory | Relative cost of transmitting a byte over this link. Range is from 0 (lowest cost) to 255. This is an administratively assigned value associated with this TG. |
| 1.3.6.1.4.1.2.6.2.13.2.3.4.1.15 | ColumnibmappnNnTgFRSecurity | read-only | mandatory | The security is represented as an integer with a range of 1 thru 255 with the most common values enumerated as defined above. This is an administratively assig… |
| 1.3.6.1.4.1.2.6.2.13.2.3.4.1.16 | ColumnibmappnNnTgFRDelay | read-only | mandatory | Relative amount of time that it takes for a signal to travel the length of the logical link. This time is represented in micro seconds, with some of the more c… |
| 1.3.6.1.4.1.2.6.2.13.2.3.4.1.17 | ColumnibmappnNnTgFRModemClass | read-only | mandatory | This is used to have multiple images for a connection network. For a connection network it is the same as in the TG vector; for a non-connection network it is … |
| 1.3.6.1.4.1.2.6.2.13.2.3.4.1.18 | ColumnibmappnNnTgFRUsr1 | read-only | mandatory | First user-defined TG characteristic for this TG with a range of 0-255. This is an administratively assigned value associated with this TG. |
| 1.3.6.1.4.1.2.6.2.13.2.3.4.1.19 | ColumnibmappnNnTgFRUsr2 | read-only | mandatory | Second user-defined TG characteristic for this TG with a range of 0-255. This is an administratively assigned value associated with this TG. |
| 1.3.6.1.4.1.2.6.2.13.2.3.4.1.20 | ColumnibmappnNnTgFRUsr3 | read-only | mandatory | Third user-defined TG characteristic for this TG with a range of 0-255. This is an administratively assigned value associated with this TG. |
| 1.3.6.1.4.1.2.6.2.13.3 | NodeibmappnLocalTopology | |||
| 1.3.6.1.4.1.2.6.2.13.3.1 | NodeibmappnLocalThisNode | |||
| 1.3.6.1.4.1.2.6.2.13.3.1.1 | NodeibmappnLocalGeneral | |||
| 1.3.6.1.4.1.2.6.2.13.3.1.1.1 | ScalaribmappnLocalNodeName | read-only | mandatory | Administratively-assigned fully-qualified name for this node. Format is NETID.CPNAME. |
| 1.3.6.1.4.1.2.6.2.13.3.1.1.2 | ScalaribmappnLocalNodeType | read-only | mandatory | Type of APPN node. |
| 1.3.6.1.4.1.2.6.2.13.3.1.2 | NodeibmappnLocalNnSpecific | |||
| 1.3.6.1.4.1.2.6.2.13.3.1.2.1 | ScalaribmappnLocalNnRsn | read-only | mandatory | Resource sequence number is assigned and controlled by the network node that owns this resource. This is always an even unsigned number unless an error has occ… |
| 1.3.6.1.4.1.2.6.2.13.3.1.2.2 | ScalaribmappnLocalNnRouteAddResist | read-only | mandatory | Route addition resistance indicates the relative desirability of using this node for intermediate session traffic. The value, which can be any integer 0-255, i… |
| 1.3.6.1.4.1.2.6.2.13.3.1.2.3 | ScalaribmappnLocalNnCongested | read-only | mandatory | Indicates whether this node is congested. Other network nodes stop routing traffic to this node while this flag is on. |
| 1.3.6.1.4.1.2.6.2.13.3.1.2.4 | ScalaribmappnLocalNnIsrDepleted | read-only | mandatory | Indicate whether intermediated session routing resources are depleted. Other network nodes stop routing traffic through this node while this flag is on. |
| 1.3.6.1.4.1.2.6.2.13.3.1.2.5 | ScalaribmappnLocalNnEndptDepleted | read-only | mandatory | Indicates whether session endpoint resources are depleted. |
| 1.3.6.1.4.1.2.6.2.13.3.1.2.6 | ScalaribmappnLocalNnQuiescing | read-only | mandatory | Indicates whether the node is quiescing. |
| 1.3.6.1.4.1.2.6.2.13.3.1.2.7 | ScalaribmappnLocalNnGateway | read-only | mandatory | Indicates whether the node is a gateway. |
| 1.3.6.1.4.1.2.6.2.13.3.1.2.8 | ScalaribmappnLocalNnCentralDirectory | read-only | mandatory | Indicates whether the node is a central directory. |
| 1.3.6.1.4.1.2.6.2.13.3.1.2.9 | ScalaribmappnLocalNnIsr | read-only | mandatory | Indicates whether the node supports intermediate session routing. |
| 1.3.6.1.4.1.2.6.2.13.3.1.2.10 | ScalaribmappnLocalNnChainSupport | read-only | mandatory | Indicates whether the node supports chaining. |
| 1.3.6.1.4.1.2.6.2.13.3.1.2.11 | ScalaribmappnLocalNnFrsn | read-only | mandatory | Flow reduction sequence numbers (FRSNs) are associated with Topology Database Updates (TDUs) and are unique only within each APPN network node. A TDU can be as… |
| 1.3.6.1.4.1.2.6.2.13.3.1.3 | NodeibmappnLocalTg | |||
| 1.3.6.1.4.1.2.6.2.13.3.1.3.1 | TableibmappnLocalTgTable | not-accessible | mandatory | TG Table describes all of the TGs owned by this node. The TG destination can be a virtual node, network node, len, or end node. |
| 1.3.6.1.4.1.2.6.2.13.3.1.3.1.1 | RowibmappnLocalTgEntry | not-accessible | mandatory | This table is indexed by the destination CPname and the TG number. |
| 1.3.6.1.4.1.2.6.2.13.3.1.3.1.1.1 | ColumnibmappnLocalTgDest | read-only | mandatory | Administratively-assigned name for the destination node for this TG. This is the fully-qualified network node name. |
| 1.3.6.1.4.1.2.6.2.13.3.1.3.1.1.2 | ColumnibmappnLocalTgNum | read-only | mandatory | Number associated with this transmission group. |
| 1.3.6.1.4.1.2.6.2.13.3.1.3.1.1.3 | ColumnibmappnLocalTgDestVirtual | read-only | mandatory | Indicates whether the destination node is a Virtual node. |
| 1.3.6.1.4.1.2.6.2.13.3.1.3.1.1.4 | ColumnibmappnLocalTgDlcData | read-only | mandatory | DLC specific data related to the link connection network. Token-Ring - MAC/SAP X.25 Switched - dial digits X.21 Switched - dial digits Circuit Swtch - dial dig… |
| 1.3.6.1.4.1.2.6.2.13.3.1.3.1.1.5 | ColumnibmappnLocalTgRsn | read-only | mandatory | The resource sequence number is assigned and controlled by the network node that owns this resource. This is always an even unsigned number unless an error has… |
| 1.3.6.1.4.1.2.6.2.13.3.1.3.1.1.6 | ColumnibmappnLocalTgQuiescing | read-only | mandatory | Indicates whether the Transmission Group is quiescing. |
| 1.3.6.1.4.1.2.6.2.13.3.1.3.1.1.7 | ColumnibmappnLocalTgOperational | read-only | mandatory | Indicates whether the Transmission Group is operational. |
| 1.3.6.1.4.1.2.6.2.13.3.1.3.1.1.8 | ColumnibmappnLocalTgCpCpSession | read-only | mandatory | Indicates whether the CP-CP Sessions are supported on this TG. |
| 1.3.6.1.4.1.2.6.2.13.3.1.3.1.1.9 | ColumnibmappnLocalTgEffCap | read-only | mandatory | The effective capacity is an integer value that indicates the actual kilo bits per second. It is derived from the link bandwidth and maximum load factor with t… |
| 1.3.6.1.4.1.2.6.2.13.3.1.3.1.1.10 | ColumnibmappnLocalTgConnCost | read-only | mandatory | Cost per connect time: a value representing the relative cost per unit of time to use the TG. Range is from 0, which means no cost, to 255. |
| 1.3.6.1.4.1.2.6.2.13.3.1.3.1.1.11 | ColumnibmappnLocalTgByteCost | read-only | mandatory | Relative cost of transmitting a byte over this link. Range is from 0 (lowest cost) to 255. |
| 1.3.6.1.4.1.2.6.2.13.3.1.3.1.1.12 | ColumnibmappnLocalTgSecurity | read-only | mandatory | Security level for this TG. |
| 1.3.6.1.4.1.2.6.2.13.3.1.3.1.1.13 | ColumnibmappnLocalTgDelay | read-only | mandatory | Relative amount of time that it takes for a signal to travel the length of the logical link. This time is represented in micro seconds, with some of the more c… |
| 1.3.6.1.4.1.2.6.2.13.3.1.3.1.1.14 | ColumnibmappnLocalTgModemClass | read-only | mandatory | This is used to have multiple images for a connection network. For a connection network it is the same as in the TG vector and for a non-connection network it … |
| 1.3.6.1.4.1.2.6.2.13.3.1.3.1.1.15 | ColumnibmappnLocalTgUsr1 | read-only | mandatory | Value of the first user-defined TG characteristic for this TG. Range is 0-255. |
| 1.3.6.1.4.1.2.6.2.13.3.1.3.1.1.16 | ColumnibmappnLocalTgUsr2 | read-only | mandatory | Value of the second user-defined TG characteristic for this TG. Range is 0-255. |
| 1.3.6.1.4.1.2.6.2.13.3.1.3.1.1.17 | ColumnibmappnLocalTgUsr3 | read-only | mandatory | Value of the third user-defined TG characteristic for this TG. Range is 0-255. |
| 1.3.6.1.4.1.2.6.2.13.3.2 | NodeibmappnLocalEnTopology | |||
| 1.3.6.1.4.1.2.6.2.13.3.2.1 | TableibmappnLocalEnTable | not-accessible | mandatory | Portion of the APPN topology database that describes the end nodes known to this node. |
| 1.3.6.1.4.1.2.6.2.13.3.2.1.1 | RowibmappnLocalEnEntry | not-accessible | mandatory | This table is indexed by the end node CPname. |
| 1.3.6.1.4.1.2.6.2.13.3.2.1.1.1 | ColumnibmappnLocalEnName | read-only | mandatory | Administratively-assigned fully-qualified name of end node in the format NETID.CPNAME. |
| 1.3.6.1.4.1.2.6.2.13.3.2.1.1.2 | ColumnibmappnLocalEnEntryTimeLeft | read-only | mandatory | Number of days before deletion of this end node entry. Range is 0-31. |
| 1.3.6.1.4.1.2.6.2.13.3.2.1.1.3 | ColumnibmappnLocalEnType | read-only | mandatory | Type of APPN node (must always be a len or end node). |
| 1.3.6.1.4.1.2.6.2.13.3.2.2 | TableibmappnLocalEnTgTable | not-accessible | mandatory | Table describing all of the TGs owned by the end nodes known to this node. The TG destination can be a virtual node, network node, or end node. |
| 1.3.6.1.4.1.2.6.2.13.3.2.2.1 | RowibmappnLocalEnTgEntry | not-accessible | mandatory | This table requires multiple indexes to uniquely identify each TG. They are originating CPname, destination CPname, and the TG number. |
| 1.3.6.1.4.1.2.6.2.13.3.2.2.1.1 | ColumnibmappnLocalEnTgOrigin | read-only | mandatory | Administratively-assigned name for the origination node for this TG. This is the fully-qualified network name. |
| 1.3.6.1.4.1.2.6.2.13.3.2.2.1.2 | ColumnibmappnLocalEnTgDest | read-only | mandatory | Administratively-assigned name for the destination node for this TG. This is the fully-qualified network name. |
| 1.3.6.1.4.1.2.6.2.13.3.2.2.1.3 | ColumnibmappnLocalEnTgNum | read-only | mandatory | Number associated with this transmission group. |
| 1.3.6.1.4.1.2.6.2.13.3.2.2.1.4 | ColumnibmappnLocalEnTgEntryTimeLeft | read-only | mandatory | Number of days before deletion of this end node TG entry. Range is 0-31. |
| 1.3.6.1.4.1.2.6.2.13.3.2.2.1.5 | ColumnibmappnLocalEnTgDestVirtual | read-only | mandatory | Indicates whether the destination node is a virtual node. |
| 1.3.6.1.4.1.2.6.2.13.3.2.2.1.6 | ColumnibmappnLocalEnTgDlcData | read-only | mandatory | DLC specific data related to the link connection network. Token-Ring - MAC/SAP X.25 Switched - dial digits X.21 Switched - dial digits Circuit Swtch - dial dig… |
| 1.3.6.1.4.1.2.6.2.13.3.2.2.1.7 | ColumnibmappnLocalEnTgOperational | read-only | mandatory | Indicates whether the Transmission Group is operational. |
| 1.3.6.1.4.1.2.6.2.13.3.2.2.1.8 | ColumnibmappnLocalEnTgCpCpSession | read-only | mandatory | Indicates whether CP-CP sessions are supported on this TG. |
| 1.3.6.1.4.1.2.6.2.13.3.2.2.1.9 | ColumnibmappnLocalEnTgEffCap | read-only | mandatory | The effective capacity is an integer value that indicates the actual kilo bits per second. It is derived from the link bandwidth and maximum load factor with t… |
| 1.3.6.1.4.1.2.6.2.13.3.2.2.1.10 | ColumnibmappnLocalEnTgConnCost | read-only | mandatory | Cost per connect time: a value representing the relative cost per unit of time to use the TG. Range is from 0, which means no cost, to 255. |
| 1.3.6.1.4.1.2.6.2.13.3.2.2.1.11 | ColumnibmappnLocalEnTgByteCost | read-only | mandatory | Relative cost of transmitting a byte over this link. Range is from 0, which means no cost, to 255. |
| 1.3.6.1.4.1.2.6.2.13.3.2.2.1.12 | ColumnibmappnLocalEnTgSecurity | read-only | mandatory | Security level for this TG. |
| 1.3.6.1.4.1.2.6.2.13.3.2.2.1.13 | ColumnibmappnLocalEnTgDelay | read-only | mandatory | Relative amount of time that it takes for a signal to travel the length of the logical link. This time is represented in micro seconds, with some of the more c… |
| 1.3.6.1.4.1.2.6.2.13.3.2.2.1.14 | ColumnibmappnLocalEnTgModemClass | read-only | mandatory | This is used to have multiple images for a connection network. For a connection network it is the same as in the TG vector and for a non connection network it … |
| 1.3.6.1.4.1.2.6.2.13.3.2.2.1.15 | ColumnibmappnLocalEnTgUsr1 | read-only | mandatory | First user-defined TG characteristic for this TG. Range of values is 0-255. |
| 1.3.6.1.4.1.2.6.2.13.3.2.2.1.16 | ColumnibmappnLocalEnTgUsr2 | read-only | mandatory | Second user-defined TG characteristic for this TG. Range of values is 0-255. |
| 1.3.6.1.4.1.2.6.2.13.3.2.2.1.17 | ColumnibmappnLocalEnTgUsr3 | read-only | mandatory | Third user-defined TG characteristic for this TG. Range of values is 0-255. |
| 1.3.6.1.4.1.2.6.2.13.5 | NodeibmappnDir | |||
| 1.3.6.1.4.1.2.6.2.13.5.1 | NodeibmappnDirPerf | |||
| 1.3.6.1.4.1.2.6.2.13.5.1.1 | ScalaribmappnDirMaxCaches | read-only | mandatory | Maximum number of cache entries allowed. This is an administratively assigned value. |
| 1.3.6.1.4.1.2.6.2.13.5.1.2 | ScalaribmappnDirCurCaches | read-only | mandatory | Current number of cache entries. |
| 1.3.6.1.4.1.2.6.2.13.5.1.3 | ScalaribmappnDirCurHomeEntries | read-only | mandatory | Current number of home entries. |
| 1.3.6.1.4.1.2.6.2.13.5.1.4 | ScalaribmappnDirRegEntries | read-only | mandatory | Current number of registered entries. |
| 1.3.6.1.4.1.2.6.2.13.5.1.5 | ScalaribmappnDirInLocates | read-only | mandatory | Number of directed locates received. |
| 1.3.6.1.4.1.2.6.2.13.5.1.6 | ScalaribmappnDirInBcastLocates | read-only | mandatory | Number of broadcast locates received. |
| 1.3.6.1.4.1.2.6.2.13.5.1.7 | ScalaribmappnDirOutLocates | read-only | mandatory | Number of directed locates sent. |
| 1.3.6.1.4.1.2.6.2.13.5.1.8 | ScalaribmappnDirOutBcastLocates | read-only | mandatory | Number of broadcast locates sent. |
| 1.3.6.1.4.1.2.6.2.13.5.1.9 | ScalaribmappnDirNotFoundLocates | read-only | mandatory | Number of directed locates returned with a 'not found'. |
| 1.3.6.1.4.1.2.6.2.13.5.1.10 | ScalaribmappnDirNotFoundBcastLocates | read-only | mandatory | Number of broadcast locates returned with a not found. |
| 1.3.6.1.4.1.2.6.2.13.5.1.11 | ScalaribmappnDirLocateOutstands | read-only | mandatory | Current number of outstanding locates, both directed and broadcast. This value varies. A value of zero indicates that no locates are unanswered. |
| 1.3.6.1.4.1.2.6.2.13.5.2 | TableibmappnDirTable | not-accessible | mandatory | Table containing information about all known LUs and TPs. |
| 1.3.6.1.4.1.2.6.2.13.5.2.1 | RowibmappnDirEntry | not-accessible | mandatory | This table is indexed by the LU name. |
| 1.3.6.1.4.1.2.6.2.13.5.2.1.1 | ColumnibmappnDirLuName | read-only | mandatory | Fully-qualified network LU name in the domain of the serving network node. |
| 1.3.6.1.4.1.2.6.2.13.5.2.1.2 | ColumnibmappnDirServerName | read-only | mandatory | Fully-qualified control point (CP) name of the network node server. For unassociated end node entries, the end node fully-qualified name is returned. |
| 1.3.6.1.4.1.2.6.2.13.5.2.1.3 | ColumnibmappnDirLuOwnerName | read-only | mandatory | Fully-qualified CP name of the node at which the LU is located. This name is the same as the serving NN name when the LU is located at a network node or an una… |
| 1.3.6.1.4.1.2.6.2.13.5.2.1.4 | ColumnibmappnDirLuLocation | read-only | mandatory | Specifies the location of the LU. |
| 1.3.6.1.4.1.2.6.2.13.5.2.1.5 | ColumnibmappnDirType | read-only | mandatory | Directory types are: 1 - Home The LU is in the domain of the local network node and the LU information has been configured at the local node. 2 - Cache The LU … |
| 1.3.6.1.4.1.2.6.2.13.5.2.1.6 | ColumnibmappnDirWildCard | read-only | mandatory | 1 - Other means unknown type of LU entry. 2 - Expliced-entry means the full LUNAME will be used for locating this LU. 3 - Partial-wildcard means only the non-b… |
| 1.3.6.1.4.1.2.6.2.13.6 | NodeibmappnCos | |||
| 1.3.6.1.4.1.2.6.2.13.6.1 | TableibmappnCosModeTable | not-accessible | mandatory | Table representing all of the defined mode names for this node. The table contains the matching COS name. |
| 1.3.6.1.4.1.2.6.2.13.6.1.1 | RowibmappnCosModeEntry | not-accessible | mandatory | This table is indexed by the Mode Name. |
| 1.3.6.1.4.1.2.6.2.13.6.1.1.1 | ColumnibmappnCosModeName | read-only | mandatory | Administratively-assigned name for this mode entry. |
| 1.3.6.1.4.1.2.6.2.13.6.1.1.2 | ColumnibmappnCosModeCosName | read-only | mandatory | An administratively assigned name for this Class of Service. |
| 1.3.6.1.4.1.2.6.2.13.6.2 | TableibmappnCosNameTable | not-accessible | mandatory | Table representing all of the defined class-of-service names for this node. The COS node and TG tables are accessed using the same index, which is the COS name. |
| 1.3.6.1.4.1.2.6.2.13.6.2.1 | RowibmappnCosNameEntry | not-accessible | mandatory | The COS name is the index to this table. |
| 1.3.6.1.4.1.2.6.2.13.6.2.1.1 | ColumnibmappnCosName | read-only | mandatory | Administratively-assigned name for this class of service. |
| 1.3.6.1.4.1.2.6.2.13.6.2.1.2 | ColumnibmappnCosTransPriority | read-only | mandatory | Transmission priority for this class of service. Values are: Low Medium High Network |
| 1.3.6.1.4.1.2.6.2.13.6.3 | TableibmappnCosNodeRowTable | not-accessible | mandatory | This table contains all node-row information for all class of service in this node. |
| 1.3.6.1.4.1.2.6.2.13.6.3.1 | RowibmappnCosNodeRowEntry | not-accessible | mandatory | The COS name is the first index and a integer is the second index to insure a unique index. |
| 1.3.6.1.4.1.2.6.2.13.6.3.1.1 | ColumnibmappnCosNodeRowName | read-only | mandatory | Administratively-assigned name for this class of service. |
| 1.3.6.1.4.1.2.6.2.13.6.3.1.2 | ColumnibmappnCosNodeRowIndex | read-only | mandatory | Index of COS name. This same value is used to access the node and TG COS tables. Range of values is 0-255. |
| 1.3.6.1.4.1.2.6.2.13.6.3.1.3 | ColumnibmappnCosNodeRowWgt | read-only | mandatory | Weight to be associated with the nodes that fit the criteria specified by this node row. |
| 1.3.6.1.4.1.2.6.2.13.6.3.1.4 | ColumnibmappnCosNodeRowResistMin | read-only | mandatory | Minimum route addition resistance value for this node. Range of values is 0-255. The lower the value, the more desirable the node is for intermediate routing. |
| 1.3.6.1.4.1.2.6.2.13.6.3.1.5 | ColumnibmappnCosNodeRowResistMax | read-only | mandatory | Maximum route addition resistance value for this node. Range of values is 0-255. The lower the value, the more desirable the node is for intermediate routing. |
| 1.3.6.1.4.1.2.6.2.13.6.3.1.6 | ColumnibmappnCosNodeRowMinCongestAllow | read-only | mandatory | Indicates whether low congestion will be tolerated. The minimum and maximum parameters will allow specifying either low-congested, high-congested, or either to… |
| 1.3.6.1.4.1.2.6.2.13.6.3.1.7 | ColumnibmappnCosNodeRowMaxCongestAllow | read-only | mandatory | Indicates whether high congestion will be tolerated. The minimum and maximum parameters will allow specifying either low-congested, high-congested, or either t… |
| 1.3.6.1.4.1.2.6.2.13.6.4 | TableibmappnCosTgRowTable | not-accessible | mandatory | Table containing all the Tg-row information for all class of service defined in this node. |
| 1.3.6.1.4.1.2.6.2.13.6.4.1 | RowibmappnCosTgRowEntry | not-accessible | mandatory | The TgRowName and the TgRowIndex are the index for this table. |
| 1.3.6.1.4.1.2.6.2.13.6.4.1.1 | ColumnibmappnCosTgRowName | read-only | mandatory | Administratively-assigned name for this class of service. |
| 1.3.6.1.4.1.2.6.2.13.6.4.1.2 | ColumnibmappnCosTgRowIndex | read-only | mandatory | Index of COS name. This same value is used to access the node and TG COS tables. |
| 1.3.6.1.4.1.2.6.2.13.6.4.1.3 | ColumnibmappnCosTgRowWgt | read-only | mandatory | Weight to be associated with the nodes that fit the criteria specified by this tg-row. |
| 1.3.6.1.4.1.2.6.2.13.6.4.1.4 | ColumnibmappnCosTgRowEffCapMin | read-only | mandatory | Minimum acceptable speed for this Class of Service. The effective capacity is an integer value that indicates the actual kilo bits per second. It is derived fr… |
| 1.3.6.1.4.1.2.6.2.13.6.4.1.5 | ColumnibmappnCosTgRowEffCapMax | read-only | mandatory | Maximum acceptable speed for this Class of Service. The effective capacity is an integer value that indicates the actual kilo bits per second. It is derived fr… |
| 1.3.6.1.4.1.2.6.2.13.6.4.1.6 | ColumnibmappnCosTgRowConnCostMin | read-only | mandatory | Minimum acceptable cost per connect time for this Class of Service. Cost per connect time: a value representing the relative cost per unit of time to use the T… |
| 1.3.6.1.4.1.2.6.2.13.6.4.1.7 | ColumnibmappnCosTgRowConnCostMax | read-only | mandatory | Maximum acceptable cost per connect time for this Class of Service. Cost per connect time: a value representing the relative cost per unit of time to use the T… |
| 1.3.6.1.4.1.2.6.2.13.6.4.1.8 | ColumnibmappnCosTgRowByteCostMin | read-only | mandatory | Minimum acceptable cost per byte for this Class of Service. |
| 1.3.6.1.4.1.2.6.2.13.6.4.1.9 | ColumnibmappnCosTgRowByteCostMax | read-only | mandatory | Maximum acceptable cost per byte for this Class of Service. |
| 1.3.6.1.4.1.2.6.2.13.6.4.1.10 | ColumnibmappnCosTgRowSecurityMin | read-only | mandatory | Minimum acceptable security for this Class of Service. |
| 1.3.6.1.4.1.2.6.2.13.6.4.1.11 | ColumnibmappnCosTgRowSecurityMax | read-only | mandatory | Maximum acceptable security for this Class of Service. |
| 1.3.6.1.4.1.2.6.2.13.6.4.1.12 | ColumnibmappnCosTgRowDelayMin | read-only | mandatory | Minimum acceptable propagation delay for this class of service. Relative amount of time that it takes for a signal to travel the length of the logical link. Th… |
| 1.3.6.1.4.1.2.6.2.13.6.4.1.13 | ColumnibmappnCosTgRowDelayMax | read-only | mandatory | Maximum acceptable propagation delay for this class of service. Relative amount of time that it takes for a signal to travel the length of the logical link. Th… |
| 1.3.6.1.4.1.2.6.2.13.6.4.1.14 | ColumnibmappnCosTgRowUsr1Min | read-only | mandatory | Minimum acceptable value for this user defined characteristic. Range of values is 0-255. |
| 1.3.6.1.4.1.2.6.2.13.6.4.1.15 | ColumnibmappnCosTgRowUsr1Max | read-only | mandatory | Maximum acceptable value for this user defined characteristic. Range of values is 0-255. |
| 1.3.6.1.4.1.2.6.2.13.6.4.1.16 | ColumnibmappnCosTgRowUsr2Min | read-only | mandatory | Minimum acceptable value for this user defined characteristic. Range of values is 0-255. |
| 1.3.6.1.4.1.2.6.2.13.6.4.1.17 | ColumnibmappnCosTgRowUsr2Max | read-only | mandatory | A Maximum acceptable value for this user defined characteristic. |
| 1.3.6.1.4.1.2.6.2.13.6.4.1.18 | ColumnibmappnCosTgRowUsr3Min | read-only | mandatory | Minimum acceptable value for this user defined characteristic. Range of values is 0-255. |
| 1.3.6.1.4.1.2.6.2.13.6.4.1.19 | ColumnibmappnCosTgRowUsr3Max | read-only | mandatory | Maximum acceptable value for this user defined characteristic. Range of values is 0-255. |
| 1.3.6.1.4.1.2.6.2.13.7 | NodeibmappnSession | |||
| 1.3.6.1.4.1.2.6.2.13.7.1 | NodeibmappnSessGeneral | |||
| 1.3.6.1.4.1.2.6.2.13.7.2 | NodeibmappnSessEndPoint | |||
| 1.3.6.1.4.1.2.6.2.13.7.2.1 | NodeibmappcInformation | |||
| 1.3.6.1.4.1.2.6.2.13.7.2.1.1 | NodeibmappcInGlobal | |||
| 1.3.6.1.4.1.2.6.2.13.7.2.1.1.1 | ScalaribmappcInGlobeStatus | read-write | mandatory | Indicates the current collection options in effect: 1. notActive: collection of counters and some names is not active. 2. active: collection of counters and so… |
| 1.3.6.1.4.1.2.6.2.13.7.2.1.1.2 | ScalaribmappcInGlobeRscv | read-write | mandatory | Indicates the current collection options in effect: 1. notActive: collection of route selection control vectors is not active. 2. active: collection of route s… |
| 1.3.6.1.4.1.2.6.2.13.7.2.1.1.3 | ScalaribmappcInGlobeRscvTime | read-only | mandatory | Time when the ibmappcInGlobeRscv object last changed. This time is in hundreds of a second. |
| 1.3.6.1.4.1.2.6.2.13.7.2.1.1.4 | ScalaribmappcInGlobeCtrStatus | read-write | mandatory | Indicates whether or not the appc session counters are active. This object reflects the combination of the ibmappcInGlobeStatus object and any other product de… |
| 1.3.6.1.4.1.2.6.2.13.7.2.1.1.5 | ScalaribmappcInGlobeCtrStatusTime | read-only | mandatory | Time when the ibmappcInGlobeCtrStatus object last changed. This time is in hundreds of a second. |
| 1.3.6.1.4.1.2.6.2.13.7.2.1.1.6 | ScalaribmappcInGlobeActSess | read-only | mandatory | Number of currently active APPC sessions |
| 1.3.6.1.4.1.2.6.2.13.7.2.1.2 | TableibmappcInLluTable | not-accessible | mandatory | APPC Local Lu Table |
| 1.3.6.1.4.1.2.6.2.13.7.2.1.2.1 | RowibmappcInLluEntry | not-accessible | mandatory | Entry of APPC Local Lu Information Table. |
| 1.3.6.1.4.1.2.6.2.13.7.2.1.2.1.1 | ColumnibmappcInLluLuName | read-only | mandatory | The network-qualified LU name. This field is from 3 to 17 characters in length, including a period (.) which separates the NetId from the NAU name. |
| 1.3.6.1.4.1.2.6.2.13.7.2.1.2.1.2 | ColumnibmappcInLluDefType | read-only | mandatory | Indicates whether the LU definition was specified in the nodes system definitions or was dynamically created. |
| 1.3.6.1.4.1.2.6.2.13.7.2.1.2.1.3 | ColumnibmappcInLluSessLimit | read-only | mandatory | The maximum number of session supported by this LU. |
| 1.3.6.1.4.1.2.6.2.13.7.2.1.2.1.4 | ColumnibmappcInLluBindRspMayQ | read-only | mandatory | Indicates whether or not a received bind response will be queued if the LU is not currently active. |
| 1.3.6.1.4.1.2.6.2.13.7.2.1.2.1.5 | ColumnibmappcInLluDefaultLu | read-only | mandatory | Indicates whether the LU is the default LU for the node. |
| 1.3.6.1.4.1.2.6.2.13.7.2.1.2.1.6 | ColumnibmappcInLluCntlPtLu | read-only | mandatory | Indicates whether or not the LU is the control point (CP) LU. |
| 1.3.6.1.4.1.2.6.2.13.7.2.1.2.1.7 | ColumnibmappcInLluCurActSess | read-only | mandatory | The number of currently active sessions. |
| 1.3.6.1.4.1.2.6.2.13.7.2.1.3 | TableibmappcInRluTable | not-accessible | mandatory | APPC Remote Partner Lu Table |
| 1.3.6.1.4.1.2.6.2.13.7.2.1.3.1 | RowibmappcInRluEntry | not-accessible | mandatory | Entry of APPC Remote Partner Lu Information Table. |
| 1.3.6.1.4.1.2.6.2.13.7.2.1.3.1.1 | ColumnibmappcInRluLocLuName | read-only | mandatory | The network-qualified local LU name. This field is from 3 to 17 characters in length, including a period (.) which separates the NetId from the NAU name. |
| 1.3.6.1.4.1.2.6.2.13.7.2.1.3.1.2 | ColumnibmappcInRluParLuName | read-only | mandatory | The network-qualified partner LU name. This field is from 3 to 17 characters in length, including a period (.) which separates the NetId from the NAU name. |
| 1.3.6.1.4.1.2.6.2.13.7.2.1.3.1.3 | ColumnibmappcInRluParLuLocName | read-only | mandatory | The network-qualified partner LU local name. This field is from 3 to 17 characters in length, including a period (.) which separates the NetId from the NAU nam… |
| 1.3.6.1.4.1.2.6.2.13.7.2.1.3.1.4 | ColumnibmappcInRluDefType | read-only | mandatory | Indicates whether the LU definition was specified in the nodes system definitions or was dynamically created. |
| 1.3.6.1.4.1.2.6.2.13.7.2.1.3.1.5 | ColumnibmappcInRluDefParaSessSup | read-only | mandatory | Defined Parallel Sessions Supported. Indicates whether or not multiple session between the partner LU and its associated local LU are permitted. |
| 1.3.6.1.4.1.2.6.2.13.7.2.1.3.1.6 | ColumnibmappcInRluDefCnosSup | read-only | mandatory | Defined CNOS Supported. Indicates whether or not Change Number of Sessions (CNOS) will be used to negotiate session limits between the logical points. |
| 1.3.6.1.4.1.2.6.2.13.7.2.1.3.1.7 | ColumnibmappcInRluDefAllVerSup | read-only | mandatory | Defined Already Verified Accepted. Indicates whether or not an attach, specifying that TP security has already been verified, is accepted by the adjacent CP LU. |
| 1.3.6.1.4.1.2.6.2.13.7.2.1.3.1.8 | ColumnibmappcInRluDefAttSecSup | read-only | mandatory | Defined Attach Security Supported. Indicates whether or not the adjacent CP LU supports attach security. |
| 1.3.6.1.4.1.2.6.2.13.7.2.1.3.1.9 | ColumnibmappcInRluDefSessSecSup | read-only | mandatory | Defined Session Security Supported. Indicates whether or not the adjacent CP LU may omit a password in the user data portion of the BIND. |
| 1.3.6.1.4.1.2.6.2.13.7.2.1.3.1.10 | ColumnibmappcInRluDefEnhanSecSup | read-only | mandatory | Defined Enhance Security Supported. Indicates the level of enhance security support: 1 = none 2 = level 1 3 = level 2 |
| 1.3.6.1.4.1.2.6.2.13.7.2.1.3.1.11 | ColumnibmappcInRluActType | read-only | mandatory | Indicates whether the LU active definitions are currently active or not currently active. |
| 1.3.6.1.4.1.2.6.2.13.7.2.1.3.1.12 | ColumnibmappcInRluActParaSessSup | read-only | mandatory | Active Parallel Sessions Supported. Indicates whether or not multiple session between the partner LU and its associated local LU are permitted. |
| 1.3.6.1.4.1.2.6.2.13.7.2.1.3.1.13 | ColumnibmappcInRluActCnosSup | read-only | mandatory | Active CNOS Supported. Indicates whether or not Change Number of Sessions (CNOS) will be used to negotiate session limits between the logical points. |
| 1.3.6.1.4.1.2.6.2.13.7.2.1.3.1.14 | ColumnibmappcInRluActAllVerSup | read-only | mandatory | Active Already Verified Accepted. Indicates whether or not an attach, specifying that TP security has already been verified, is accepted by the adjacent CP LU. |
| 1.3.6.1.4.1.2.6.2.13.7.2.1.3.1.15 | ColumnibmappcInRluActAttSecSup | read-only | mandatory | Active Attach Security Supported. Indicates whether or not the adjacent CP LU supports attach security. |
| 1.3.6.1.4.1.2.6.2.13.7.2.1.3.1.16 | ColumnibmappcInRluActSessSecSup | read-only | mandatory | Active Session Security Supported. Indicates whether or not the adjacent CP LU may omit a password in the user data portion of the BIND. |
| 1.3.6.1.4.1.2.6.2.13.7.2.1.3.1.17 | ColumnibmappcInRluActEnhanSecSup | read-only | mandatory | Active Enhance Security Supported. Indicates the level of enhance security support: 1 = none 2 = level 1 3 = level 2 |
| 1.3.6.1.4.1.2.6.2.13.7.2.1.4 | TableibmappcInMdTable | not-accessible | mandatory | APPC Mode Table |
| 1.3.6.1.4.1.2.6.2.13.7.2.1.4.1 | RowibmappcInMdEntry | not-accessible | mandatory | Entry of APPC Mode Information Table. |
| 1.3.6.1.4.1.2.6.2.13.7.2.1.4.1.1 | ColumnibmappcInMdLluName | read-only | mandatory | The network-qualified local LU name. This field is from 3 to 17 characters in length, including a period (.) which separates the NetId from the NAU name. |
| 1.3.6.1.4.1.2.6.2.13.7.2.1.4.1.2 | ColumnibmappcInMdRluName | read-only | mandatory | The network-qualified remote LU name. This field is from 3 to 17 characters in length, including a period (.) which separates the NetId from the NAU name. |
| 1.3.6.1.4.1.2.6.2.13.7.2.1.4.1.3 | ColumnibmappcInMdModeName | read-only | mandatory | The mode name. |
| 1.3.6.1.4.1.2.6.2.13.7.2.1.4.1.4 | ColumnibmappcInMdDefType | read-only | mandatory | Indicates whether the mode definition was specified in the nodes system definitions or was dynamically created. |
| 1.3.6.1.4.1.2.6.2.13.7.2.1.4.1.5 | ColumnibmappcInMdSessEndTpName | read-only | mandatory | The session end point transaction program name. |
| 1.3.6.1.4.1.2.6.2.13.7.2.1.4.1.6 | ColumnibmappcInMdSessLimit | read-only | mandatory | Session Limit. Identifies the total number of sessions that can be established with the partner LU. |
| 1.3.6.1.4.1.2.6.2.13.7.2.1.4.1.7 | ColumnibmappcInMdMaxSessLimit | read-only | mandatory | Maximum Session Limit. Specifies the maximum number of sessions supported by the LU pair using this mode name. |
| 1.3.6.1.4.1.2.6.2.13.7.2.1.4.1.8 | ColumnibmappcInMdAutoActLimit | read-only | mandatory | Auto Activate Limit. Specifies the maximum number of sessions which can be activated when this mode is active. |
| 1.3.6.1.4.1.2.6.2.13.7.2.1.4.1.9 | ColumnibmappcInMdDrainSelf | read-only | mandatory | Drain Self. Indicates whether or not the local LU can be drained. |
| 1.3.6.1.4.1.2.6.2.13.7.2.1.4.1.10 | ColumnibmappcInMdDrainPart | read-only | mandatory | Drain Partner. Indicates whether or not the partner LU can be drained. |
| 1.3.6.1.4.1.2.6.2.13.7.2.1.4.1.11 | ColumnibmappcInMdMinCwinLimit | read-only | mandatory | Minimum Conwinners Limit. Identifies the minimum number of conwinner sessions. |
| 1.3.6.1.4.1.2.6.2.13.7.2.1.4.1.12 | ColumnibmappcInMdMinClosLimit | read-only | mandatory | Minimum Conlossers Limit. Identifies the minimum number of conloser sessions. |
| 1.3.6.1.4.1.2.6.2.13.7.2.1.4.1.13 | ColumnibmappcInMdRecvPacWinSz | read-only | mandatory | The size of the receive pacing window. |
| 1.3.6.1.4.1.2.6.2.13.7.2.1.4.1.14 | ColumnibmappcInMdSendPacWinSz | read-only | mandatory | The size of the send pacing window. |
| 1.3.6.1.4.1.2.6.2.13.7.2.1.4.1.15 | ColumnibmappcInMdPrefRecvRuSz | read-only | mandatory | The preferred receive ru size. |
| 1.3.6.1.4.1.2.6.2.13.7.2.1.4.1.16 | ColumnibmappcInMdPrefSendRuSz | read-only | mandatory | The preferred send ru size. |
| 1.3.6.1.4.1.2.6.2.13.7.2.1.4.1.17 | ColumnibmappcInMdRecvRuSzUpBnd | read-only | mandatory | The receive ru upper boundary size. |
| 1.3.6.1.4.1.2.6.2.13.7.2.1.4.1.18 | ColumnibmappcInMdSendRuSzUpBnd | read-only | mandatory | The send ru upper boundary size. |
| 1.3.6.1.4.1.2.6.2.13.7.2.1.4.1.19 | ColumnibmappcInMdRecvRuSzLoBnd | read-only | mandatory | The receive ru lower boundary size. |
| 1.3.6.1.4.1.2.6.2.13.7.2.1.4.1.20 | ColumnibmappcInMdSendRuSzLoBnd | read-only | mandatory | The send ru lower boundary size. |
| 1.3.6.1.4.1.2.6.2.13.7.2.1.4.1.21 | ColumnibmappcInMdDfSyncLvl | read-only | mandatory | The defined sync level. |
| 1.3.6.1.4.1.2.6.2.13.7.2.1.4.1.22 | ColumnibmappcInMdAcSyncLvl | read-only | mandatory | The active sync level. |
| 1.3.6.1.4.1.2.6.2.13.7.2.1.4.1.23 | ColumnibmappcInMdDfCrypto | read-only | mandatory | Defined cryoptograhy supported. |
| 1.3.6.1.4.1.2.6.2.13.7.2.1.4.1.24 | ColumnibmappcInMdAcCrypto | read-only | mandatory | Active cryptography supported. |
| 1.3.6.1.4.1.2.6.2.13.7.2.1.4.1.25 | ColumnibmappcInMdReinit | read-only | mandatory | The reinitialization parameter. |
| 1.3.6.1.4.1.2.6.2.13.7.2.1.4.1.26 | ColumnibmappcInMdAltCode | read-only | mandatory | Alternate code supported. |
| 1.3.6.1.4.1.2.6.2.13.7.2.1.4.1.27 | ColumnibmappcInMdActCwin | read-only | mandatory | The number of active conwinners. |
| 1.3.6.1.4.1.2.6.2.13.7.2.1.4.1.28 | ColumnibmappcInMdActClos | read-only | mandatory | The number of active conlosers. |
| 1.3.6.1.4.1.2.6.2.13.7.2.1.4.1.29 | ColumnibmappcInMdPndCwin | read-only | mandatory | The number of pending conwinners. |
| 1.3.6.1.4.1.2.6.2.13.7.2.1.4.1.30 | ColumnibmappcInMdPndClos | read-only | mandatory | The number of pending conlosers. |
| 1.3.6.1.4.1.2.6.2.13.7.2.1.4.1.31 | ColumnibmappcInMdPtmCwin | read-only | mandatory | The number of pending termination conlosers. |
| 1.3.6.1.4.1.2.6.2.13.7.2.1.4.1.32 | ColumnibmappcInMdPtmClos | read-only | mandatory | The number of pending termination conwinners. |
| 1.3.6.1.4.1.2.6.2.13.7.2.1.4.1.33 | ColumnibmappcInMdFreeSessLst | read-only | mandatory | The size of the free seesion list. |
| 1.3.6.1.4.1.2.6.2.13.7.2.1.4.1.34 | ColumnibmappcInMdWaitReqLst | read-only | mandatory | The size of the waiting request list. |
| 1.3.6.1.4.1.2.6.2.13.7.2.1.5 | TableibmappcInLtpTable | not-accessible | mandatory | APPC Local TP Table |
| 1.3.6.1.4.1.2.6.2.13.7.2.1.5.1 | RowibmappcInLtpEntry | not-accessible | mandatory | Entry of APPC Local TP Information Table. |
| 1.3.6.1.4.1.2.6.2.13.7.2.1.5.1.1 | ColumnibmappcInLtpLuName | read-only | mandatory | The network-qualified local LU name. This field is from 3 to 17 characters in length, including a period (.) which separates the NetId from the NAU name. |
| 1.3.6.1.4.1.2.6.2.13.7.2.1.5.1.2 | ColumnibmappcInLtpTpName | read-only | mandatory | The local transaction program name. |
| 1.3.6.1.4.1.2.6.2.13.7.2.1.5.1.3 | ColumnibmappcInLtpDefType | read-only | mandatory | The TP definition type. Indicates whether the TP was specified in the nodes system definitions or was dynamically created. |
| 1.3.6.1.4.1.2.6.2.13.7.2.1.5.1.4 | ColumnibmappcInLtpSyncLvl | read-only | mandatory | The TP synchroniztion level. |
| 1.3.6.1.4.1.2.6.2.13.7.2.1.5.1.5 | ColumnibmappcInLtpInstLmt | read-only | mandatory | The TP instance limit. |
| 1.3.6.1.4.1.2.6.2.13.7.2.1.5.1.6 | ColumnibmappcInLtpInstNum | read-only | mandatory | The number of TP instances. |
| 1.3.6.1.4.1.2.6.2.13.7.2.1.5.1.7 | ColumnibmappcInLtpStatus | read-only | mandatory | The TP status. |
| 1.3.6.1.4.1.2.6.2.13.7.2.1.5.1.8 | ColumnibmappcInLtpLongRun | read-only | mandatory | The long running transaction program. |
| 1.3.6.1.4.1.2.6.2.13.7.2.1.5.1.9 | ColumnibmappcInLtpPfCnos | read-only | mandatory | The TP Change Number of Sessions (CNOS) privileged function. This parameter specifies whether or not this program is allowed to issue CNOS verbs. |
| 1.3.6.1.4.1.2.6.2.13.7.2.1.5.1.10 | ColumnibmappcInLtpPfSessCntl | read-only | mandatory | The TP Session Control privileged function. This parameter specifies whether or not this program is allowed to issue ACTIVATE_SESSION and DEACTIVATE_SESSION ve… |
| 1.3.6.1.4.1.2.6.2.13.7.2.1.5.1.11 | ColumnibmappcInLtpPfDefine | read-only | mandatory | The TP Define privileged function. This parameter specifies whether or not this program is allowed to issue DEFINE and DELETE verbs. |
| 1.3.6.1.4.1.2.6.2.13.7.2.1.5.1.12 | ColumnibmappcInLtpPfDisplay | read-only | mandatory | The TP Display privileged function. This parameter specifies whether or not this program is allowed to issue DISPLAY verbs. |
| 1.3.6.1.4.1.2.6.2.13.7.2.1.5.1.13 | ColumnibmappcInLtpPfAllocSer | read-only | mandatory | The TP Allocate Service privileged function. This parameter specifies whether or not this program is allowed to issue the ALLOCATE verb with its TPN parameter … |
| 1.3.6.1.4.1.2.6.2.13.7.2.1.5.1.14 | ColumnibmappcInLtpRescSup | read-only | mandatory | The TP resources supported parameter. 1. basic conversations 2. mapped conversations 3. all conversations |
| 1.3.6.1.4.1.2.6.2.13.7.2.1.5.1.15 | ColumnibmappcInLtpRecoSup | read-only | mandatory | The TP reconnect supported parameter. |
| 1.3.6.1.4.1.2.6.2.13.7.2.1.5.1.16 | ColumnibmappcInLtpSecReq | read-only | mandatory | The TP security required parameter. |
| 1.3.6.1.4.1.2.6.2.13.7.2.1.5.1.17 | ColumnibmappcInLtpSecLvl | read-only | mandatory | The TP security level parameter. |
| 1.3.6.1.4.1.2.6.2.13.7.2.1.5.1.18 | ColumnibmappcInLtpVerPip | read-only | mandatory | The TP verify pip parameter. |
| 1.3.6.1.4.1.2.6.2.13.7.2.1.5.1.19 | ColumnibmappcInLtpPipSubNum | read-only | mandatory | The TP number of pip subfields. |
| 1.3.6.1.4.1.2.6.2.13.7.2.1.6 | TableibmappcInSsTable | not-accessible | mandatory | APPC Session Table |
| 1.3.6.1.4.1.2.6.2.13.7.2.1.6.1 | RowibmappcInSsEntry | not-accessible | mandatory | Entry of APPC Session Information Table. |
| 1.3.6.1.4.1.2.6.2.13.7.2.1.6.1.1 | ColumnibmappcInSsFqLuName | read-only | mandatory | The network-qualified CP name or PU name of the node at which the session and cid originated. For APPN and LEN nodes, this is either CP name of the APPN node a… |
| 1.3.6.1.4.1.2.6.2.13.7.2.1.6.1.2 | ColumnibmappcInSsPcid | read-only | mandatory | The procedure correlation identifier (pcid) of a session. It is an 8-octet value assigned by the primary LU. |
| 1.3.6.1.4.1.2.6.2.13.7.2.1.6.1.3 | ColumnibmappcInSsPluName | read-only | mandatory | The primary LU name of the session. |
| 1.3.6.1.4.1.2.6.2.13.7.2.1.6.1.4 | ColumnibmappcInSsSluName | read-only | mandatory | The secondary LU name of the session. |
| 1.3.6.1.4.1.2.6.2.13.7.2.1.6.1.5 | ColumnibmappcInSsModeName | read-only | mandatory | The Mode Name name used for this session. This is a 1-8 character name. |
| 1.3.6.1.4.1.2.6.2.13.7.2.1.6.1.6 | ColumnibmappcInSsCosName | read-only | mandatory | The Class of Service (COS) name used for this session. This is a 1-8 character name. |
| 1.3.6.1.4.1.2.6.2.13.7.2.1.6.1.7 | ColumnibmappcInSsSessType | read-only | mandatory | The type of session. |
| 1.3.6.1.4.1.2.6.2.13.7.2.1.6.1.8 | ColumnibmappcInSsSessState | read-only | mandatory | Indicates the state of the session. 1. session is pending inactive or, 2. session is pending active or, 3. session is active or, 4. session is inactive |
| 1.3.6.1.4.1.2.6.2.13.7.2.1.6.1.9 | ColumnibmappcInSsTransPriority | read-only | mandatory | The transmission priority of this session. |
| 1.3.6.1.4.1.2.6.2.13.7.2.1.6.1.10 | ColumnibmappcInSsPaceType | read-only | mandatory | The type of pacing used for this session. |
| 1.3.6.1.4.1.2.6.2.13.7.2.1.6.1.11 | ColumnibmappcInSsSendMaxRuSz | read-only | mandatory | The maximum ru size which can be sent. |
| 1.3.6.1.4.1.2.6.2.13.7.2.1.6.1.12 | ColumnibmappcInSsRecvMaxRuSz | read-only | mandatory | The maximum ru size which can be received. |
| 1.3.6.1.4.1.2.6.2.13.7.2.1.6.1.13 | ColumnibmappcInSsEnhanceSecSup | read-only | mandatory | Enhanced security supported. Indicates the level of enhance security support: 1 = none 2 = level 1 3 = level 2 |
| 1.3.6.1.4.1.2.6.2.13.7.2.1.6.1.14 | ColumnibmappcInSsSendPacingType | read-only | mandatory | The type of pacing being used for sending data. |
| 1.3.6.1.4.1.2.6.2.13.7.2.1.6.1.15 | ColumnibmappcInSsSendRpc | read-only | mandatory | The send residual pace count. This represents the number of MU's that can still be sent in the current session window. |
| 1.3.6.1.4.1.2.6.2.13.7.2.1.6.1.16 | ColumnibmappcInSsSendNxWndwSize | read-only | mandatory | The size of the next window which will be used to send data. |
| 1.3.6.1.4.1.2.6.2.13.7.2.1.6.1.17 | ColumnibmappcInSsRecvPacingType | read-only | mandatory | The type of pacing being used for receiving data. |
| 1.3.6.1.4.1.2.6.2.13.7.2.1.6.1.18 | ColumnibmappcInSsRecvRpc | read-only | mandatory | The receive residual pace count. This represents the number of MU's that can still be received in the current session window. |
| 1.3.6.1.4.1.2.6.2.13.7.2.1.6.1.19 | ColumnibmappcInSsRecvNxWndwSize | read-only | mandatory | The size of the next window which will be used to receive data. |
| 1.3.6.1.4.1.2.6.2.13.7.2.1.6.1.20 | ColumnibmappcInSsSessStartTime | read-only | mandatory | Time when the session started in hundreds of a second. |
| 1.3.6.1.4.1.2.6.2.13.7.2.1.6.1.21 | ColumnibmappcInSsSessUpTime | read-only | mandatory | Length of time the session has been active in hundreds of a second. |
| 1.3.6.1.4.1.2.6.2.13.7.2.1.6.1.22 | ColumnibmappcInSsCtrUpTime | read-only | mandatory | Length of time the session counters have been active in hundreds of a second. |
| 1.3.6.1.4.1.2.6.2.13.7.2.1.6.1.23 | ColumnibmappcInSsP2SFmdPius | read-only | mandatory | Number of FMD PIUs sent from the Primary LU to the Secondary LU |
| 1.3.6.1.4.1.2.6.2.13.7.2.1.6.1.24 | ColumnibmappcInSsS2PFmdPius | read-only | mandatory | Number of FMD PIUs sent from the Secondary LU to the Primary LU |
| 1.3.6.1.4.1.2.6.2.13.7.2.1.6.1.25 | ColumnibmappcInSsP2SNonFmdPius | read-only | mandatory | Number of non-FMD PIUs sent from the Primary LU to the Secondary LU |
| 1.3.6.1.4.1.2.6.2.13.7.2.1.6.1.26 | ColumnibmappcInSsS2PNonFmdPius | read-only | mandatory | Number of non-FMD PIUs sent from the Secondary LU to the Primary LU |
| 1.3.6.1.4.1.2.6.2.13.7.2.1.6.1.27 | ColumnibmappcInSsP2SFmdBytes | read-only | mandatory | Number of FMD Bytes sent from the Primary LU to the Secondary LU |
| 1.3.6.1.4.1.2.6.2.13.7.2.1.6.1.28 | ColumnibmappcInSsS2PFmdBytes | read-only | mandatory | Number of FMD Bytes sent from the Secondary LU to the Primary LU |
| 1.3.6.1.4.1.2.6.2.13.7.2.1.6.1.29 | ColumnibmappcInSsP2SNonFmdBytes | read-only | mandatory | Number of non-FMD Bytes sent from the Primary LU to the Secondary LU |
| 1.3.6.1.4.1.2.6.2.13.7.2.1.6.1.30 | ColumnibmappcInSsS2PNonFmdBytes | read-only | mandatory | Number of non-FMD Bytes sent from the Secondary LU to the Primary LU |
| 1.3.6.1.4.1.2.6.2.13.7.2.1.6.1.31 | ColumnibmappcInSsRscv | read-only | mandatory | The route selection control vector (RSCV x'2B') used for this session. It is not present for APPN CP-CP sessions and also not present for LEN nodes. The format… |
| 1.3.6.1.4.1.2.6.2.13.7.2.1.7 | TableibmappcInSsStatusTable | not-accessible | mandatory | APPC Session Status Table |
| 1.3.6.1.4.1.2.6.2.13.7.2.1.7.1 | RowibmappcInSsStatusEntry | not-accessible | mandatory | Entry of APPC Session Status Information Table. This table is indexed by the SsStatusIndex, which is an integer that is continuously updated until it eventuall… |
| 1.3.6.1.4.1.2.6.2.13.7.2.1.7.1.1 | ColumnibmappcInSsStatusIndex | read-only | mandatory | Table index. The value of the index begins at zero and is incremented up to a maximum value of 2**31-1 (2,147,483,647) before wrapping. |
| 1.3.6.1.4.1.2.6.2.13.7.2.1.7.1.2 | ColumnibmappcInSsStatusTime | read-only | mandatory | Time (in hundreds of a second) since this node was last initialized. |
| 1.3.6.1.4.1.2.6.2.13.7.2.1.7.1.3 | ColumnibmappcInSsStatusType | read-only | mandatory | Indicates the entry type: 1. Received a negative bind response from the partner LU. 2. Sent a negative bind response to the partner LU. 3. Session activation r… |
| 1.3.6.1.4.1.2.6.2.13.7.2.1.7.1.4 | ColumnibmappcInSsStatusLocLuName | read-only | mandatory | The network-qualified local LU name. This field is from 3 to 17 characters in length, including a period (.) which separates the NetId from the NAU name. |
| 1.3.6.1.4.1.2.6.2.13.7.2.1.7.1.5 | ColumnibmappcInSsStatusParLuName | read-only | mandatory | The network-qualified partner LU name. This field is from 3 to 17 characters in length, including a period (.) which separates the NetId from the NAU name. |
| 1.3.6.1.4.1.2.6.2.13.7.2.1.7.1.6 | ColumnibmappcInSsStatusModeName | read-only | mandatory | The mode name. |
| 1.3.6.1.4.1.2.6.2.13.7.2.1.7.1.7 | ColumnibmappcInSsStatusUnbindType | read-only | mandatory | The type of unbind which terminated the session. This value is consists of one (1) octet; and its meaning is defined in SNA Formats. |
| 1.3.6.1.4.1.2.6.2.13.7.2.1.7.1.8 | ColumnibmappcInSsStatusSenseCode | read-only | mandatory | The sense code associated with the termination of the session. This value consists of four (4) octets; and its meaning is defined in SNA Formats. |
| 1.3.6.1.4.1.2.6.2.13.7.2.1.7.1.9 | ColumnibmappcInSsStatusComponentId | read-only | mandatory | The name of the component which sent the entry. |
| 1.3.6.1.4.1.2.6.2.13.7.2.1.7.1.10 | ColumnibmappcInSsStatusDetectModule | read-only | mandatory | The name of the module which detected the condition and sent the entry. |
| 1.3.6.1.4.1.2.6.2.13.7.3 | NodeibmappnSessIntermediate | |||
| 1.3.6.1.4.1.2.6.2.13.7.3.1 | NodeibmappnIsInformation | |||
| 1.3.6.1.4.1.2.6.2.13.7.3.1.1 | NodeibmappnIsInGlobal | |||
| 1.3.6.1.4.1.2.6.2.13.7.3.1.1.1 | ScalaribmappnIsInGlobeStatus | read-write | mandatory | Indicates the current collection options in effect: 1. notActive: collection of counters and some names is not active. 2. active: collection of counters and so… |
| 1.3.6.1.4.1.2.6.2.13.7.3.1.1.2 | ScalaribmappnIsInGlobeRscv | read-write | mandatory | Indicates the current collection options in effect: 1. notActive: collection of route selection control vectors is not active. 2. active: collection of route s… |
| 1.3.6.1.4.1.2.6.2.13.7.3.1.1.3 | ScalaribmappnIsInGlobeRscvTime | read-only | mandatory | Time when the ibmappnIsInGlobeRscv object last changed. This time is in hundreds of a second. |
| 1.3.6.1.4.1.2.6.2.13.7.3.1.1.4 | ScalaribmappnIsInGlobeCtrStatus | read-write | mandatory | Indicates whether or not the intermediate session counters are active. This object reflects the combination of the ibmappnIsInGlobeStatus object and the ibmapp… |
| 1.3.6.1.4.1.2.6.2.13.7.3.1.1.5 | ScalaribmappnIsInGlobeCtrStatusTime | read-only | mandatory | Time when the ibmappnIsInGlobeCtrStatus object last changed. This time is in hundreds of a second. |
| 1.3.6.1.4.1.2.6.2.13.7.3.1.2 | TableibmappnIsInTable | not-accessible | mandatory | Intermediate Session Information Table |
| 1.3.6.1.4.1.2.6.2.13.7.3.1.2.1 | RowibmappnIsInEntry | not-accessible | mandatory | Entry of Intermediate Session Information Table. |
| 1.3.6.1.4.1.2.6.2.13.7.3.1.2.1.1 | ColumnibmappnIsInFqLuName | read-only | mandatory | The network-qualified CP name or PU name of the node at which the session and cid originated. For APPN and LEN nodes, this is either CP name of the APPN node a… |
| 1.3.6.1.4.1.2.6.2.13.7.3.1.2.1.2 | ColumnibmappnIsInPcid | read-only | mandatory | The procedure correlation identifier (pcid) of a session. It is an 8-octet value assigned by the primary LU. |
| 1.3.6.1.4.1.2.6.2.13.7.3.1.2.1.3 | ColumnibmappnIsInPriLuName | read-only | mandatory | The primary LU name of the session. |
| 1.3.6.1.4.1.2.6.2.13.7.3.1.2.1.4 | ColumnibmappnIsInSecLuName | read-only | mandatory | The secondary LU name of the session. |
| 1.3.6.1.4.1.2.6.2.13.7.3.1.2.1.5 | ColumnibmappnIsInModeName | read-only | mandatory | The Mode Name name used for this session. This is a 1-8 character name. |
| 1.3.6.1.4.1.2.6.2.13.7.3.1.2.1.6 | ColumnibmappnIsInCosName | read-only | mandatory | The Class of Service (COS) name used for this session. This is a 1-8 character name. |
| 1.3.6.1.4.1.2.6.2.13.7.3.1.2.1.7 | ColumnibmappnIsInTransPriority | read-only | mandatory | The transmission priority of this session. |
| 1.3.6.1.4.1.2.6.2.13.7.3.1.2.1.8 | ColumnibmappnIsInSessType | read-only | mandatory | The type of intermediate session. |
| 1.3.6.1.4.1.2.6.2.13.7.3.1.2.1.9 | ColumnibmappnIsInSessState | read-write | mandatory | Indicates the state of the session. 1. session is pending inactive or, 2. session is pending active or, 3. session is active or, 4. session is inactive Existin… |
| 1.3.6.1.4.1.2.6.2.13.7.3.1.2.1.10 | ColumnibmappnIsInSessStartTime | read-only | mandatory | Time when the session started in hundreds of a second. |
| 1.3.6.1.4.1.2.6.2.13.7.3.1.2.1.11 | ColumnibmappnIsInSessUpTime | read-only | mandatory | Length of time the session has been active in hundreds of a second. |
| 1.3.6.1.4.1.2.6.2.13.7.3.1.2.1.12 | ColumnibmappnIsInCtrUpTime | read-only | mandatory | Length of time the session counters have been active in hundreds of a second. |
| 1.3.6.1.4.1.2.6.2.13.7.3.1.2.1.13 | ColumnibmappnIsInP2SFmdPius | read-only | mandatory | Number of FMD PIUs sent from the Primary LU to the Secondary LU |
| 1.3.6.1.4.1.2.6.2.13.7.3.1.2.1.14 | ColumnibmappnIsInS2PFmdPius | read-only | mandatory | Number of FMD PIUs sent from the Secondary LU to the Primary LU |
| 1.3.6.1.4.1.2.6.2.13.7.3.1.2.1.15 | ColumnibmappnIsInP2SNonFmdPius | read-only | mandatory | Number of non-FMD PIUs sent from the Primary LU to the Secondary LU |
| 1.3.6.1.4.1.2.6.2.13.7.3.1.2.1.16 | ColumnibmappnIsInS2PNonFmdPius | read-only | mandatory | Number of non-FMD PIUs sent from the Secondary LU to the Primary LU |
| 1.3.6.1.4.1.2.6.2.13.7.3.1.2.1.17 | ColumnibmappnIsInP2SFmdBytes | read-only | mandatory | Number of FMD Bytes sent from the Primary LU to the Secondary LU |
| 1.3.6.1.4.1.2.6.2.13.7.3.1.2.1.18 | ColumnibmappnIsInS2PFmdBytes | read-only | mandatory | Number of FMD Bytes sent from the Secondary LU to the Primary LU |
| 1.3.6.1.4.1.2.6.2.13.7.3.1.2.1.19 | ColumnibmappnIsInP2SNonFmdBytes | read-only | mandatory | Number of non-FMD Bytes sent from the Primary LU to the Secondary LU |
| 1.3.6.1.4.1.2.6.2.13.7.3.1.2.1.20 | ColumnibmappnIsInS2PNonFmdBytes | read-only | mandatory | Number of non-FMD Bytes sent from the Secondary LU to the Primary LU |
| 1.3.6.1.4.1.2.6.2.13.7.3.1.2.1.21 | ColumnibmappnIsInPsAdjCpName | read-only | mandatory | The primary stage adjacent CP name of this session. |
| 1.3.6.1.4.1.2.6.2.13.7.3.1.2.1.22 | ColumnibmappnIsInPsAdjTgNum | read-only | mandatory | The primary stage adjacent transmission group (TG) number associated with this session. |
| 1.3.6.1.4.1.2.6.2.13.7.3.1.2.1.23 | ColumnibmappnIsInPsSendMaxBtuSize | read-only | mandatory | The primary stage maximum basic transmission size (BTU) for sending data. |
| 1.3.6.1.4.1.2.6.2.13.7.3.1.2.1.24 | ColumnibmappnIsInPsSendPacingType | read-only | mandatory | The primary stage type of pacing being used for sending data. |
| 1.3.6.1.4.1.2.6.2.13.7.3.1.2.1.25 | ColumnibmappnIsInPsSendRpc | read-only | mandatory | The primary stage send residual pace count. This represents the primary stage number of MU's that can still be sent in the current session window. |
| 1.3.6.1.4.1.2.6.2.13.7.3.1.2.1.26 | ColumnibmappnIsInPsSendNxWndwSize | read-only | mandatory | The primary stage size of the next window which will be used to send data. |
| 1.3.6.1.4.1.2.6.2.13.7.3.1.2.1.27 | ColumnibmappnIsInPsRecvPacingType | read-only | mandatory | The primary stage type of pacing being used for receiving data. |
| 1.3.6.1.4.1.2.6.2.13.7.3.1.2.1.28 | ColumnibmappnIsInPsRecvRpc | read-only | mandatory | The primary stage receive residual pace count. This represents the primary stage number of MU's that can still be received in the current session window. |
| 1.3.6.1.4.1.2.6.2.13.7.3.1.2.1.29 | ColumnibmappnIsInPsRecvNxWndwSize | read-only | mandatory | The primary stage size of the next window which will be used to receive data. |
| 1.3.6.1.4.1.2.6.2.13.7.3.1.2.1.30 | ColumnibmappnIsInSsAdjCpName | read-only | mandatory | The secondary stage adjacent CP name of this session. |
| 1.3.6.1.4.1.2.6.2.13.7.3.1.2.1.31 | ColumnibmappnIsInSsAdjTgNum | read-only | mandatory | The secondary stage adjacent transmission group (TG) number associated with this session. |
| 1.3.6.1.4.1.2.6.2.13.7.3.1.2.1.32 | ColumnibmappnIsInSsSendMaxBtuSize | read-only | mandatory | The secondary stage maximum basic transmission size (BTU) for sending data. |
| 1.3.6.1.4.1.2.6.2.13.7.3.1.2.1.33 | ColumnibmappnIsInSsSendPacingType | read-only | mandatory | The secondary stage type of pacing being used for sending data. |
| 1.3.6.1.4.1.2.6.2.13.7.3.1.2.1.34 | ColumnibmappnIsInSsSendRpc | read-only | mandatory | The secondary stage send residual pace count. This represents the secondary stage number of MU's that can still be sent in the current session window. |
| 1.3.6.1.4.1.2.6.2.13.7.3.1.2.1.35 | ColumnibmappnIsInSsSendNxWndwSize | read-only | mandatory | The secondary stage size of the next window which will be used to send data. |
| 1.3.6.1.4.1.2.6.2.13.7.3.1.2.1.36 | ColumnibmappnIsInSsRecvPacingType | read-only | mandatory | The secondary stage type of pacing being used for receiving data. |
| 1.3.6.1.4.1.2.6.2.13.7.3.1.2.1.37 | ColumnibmappnIsInSsRecvRpc | read-only | mandatory | The secondary stage send residual pace count. This represents the secondary stage number of MU's that can still be received in the current session window. |
| 1.3.6.1.4.1.2.6.2.13.7.3.1.2.1.38 | ColumnibmappnIsInSsRecvNxWndwSize | read-only | mandatory | The secondary stage size of the next window which will be used to receive data. |
| 1.3.6.1.4.1.2.6.2.13.7.3.1.2.1.39 | ColumnibmappnIsInRouteInfo | read-only | mandatory | The route selection control vector (RSCV x'2B') used for this session. It is present for APPN nodes; but is not present for LEN nodes. The format of this vecto… |
| 1.3.6.1.4.1.2.6.2.13.7.3.2 | NodeibmappnIsAccounting | |||
| 1.3.6.1.4.1.2.6.2.13.7.3.2.1 | NodeibmappnIsAcGlobal | |||
| 1.3.6.1.4.1.2.6.2.13.7.3.2.1.1 | ScalaribmappnIsAcGlobeStatus | read-only | mandatory | This object indicates the current status for accounting type. 1. indicates collection is not active for any media type. 2. indicates collection is active for a… |
| 1.3.6.1.4.1.2.6.2.13.7.3.2.1.2 | ScalaribmappnIsAcGlobeByteThresh | read-write | mandatory | The byte threshold for recording accounting information for an active session. If the total of the byte counters (FmdBytes and NonFmdBtyes) is an even multiple… |
| 1.3.6.1.4.1.2.6.2.13.7.3.2.1.3 | ScalaribmappnIsAcGlobeCheckPt | read-write | mandatory | By setting this value to yes, the agent will collect accounting information for all active sessions. This information will be recorded to all active buffers. |
| 1.3.6.1.4.1.2.6.2.13.7.3.2.1.4 | ScalaribmappnIsAcGlobeMgrUtcSecs | read-write | mandatory | The managers Coordinated Universal Time (UTC) seconds. It contains an integer from 0 to 59. By setting this value, the agent will create time record with its c… |
| 1.3.6.1.4.1.2.6.2.13.7.3.2.1.5 | ScalaribmappnIsAcGlobeMgrUtcMins | read-write | mandatory | The managers Coordinated Universal Time (UTC) minutes. It contains an integer from 0 to 59. By setting this value, the agent will create time record with its c… |
| 1.3.6.1.4.1.2.6.2.13.7.3.2.1.6 | ScalaribmappnIsAcGlobeMgrUtcHours | read-write | mandatory | The managers Coordinated Universal Time (UTC) hours. It contains an integer from 0 to 23. By setting this value, the agent will create time record with its cor… |
| 1.3.6.1.4.1.2.6.2.13.7.3.2.1.7 | ScalaribmappnIsAcGlobeMgrUtcMdays | read-write | mandatory | The managers Coordinated Universal Time (UTC) day of the month. It contains an integer from 1 to 31; or 0 if the manager has not set this object. By setting th… |
| 1.3.6.1.4.1.2.6.2.13.7.3.2.1.8 | ScalaribmappnIsAcGlobeMgrUtcMonths | read-write | mandatory | The managers Coordinated Universal Time (UTC) months since January. It contains an integer from 0 to 11. By setting this value, the agent will create time reco… |
| 1.3.6.1.4.1.2.6.2.13.7.3.2.1.9 | ScalaribmappnIsAcGlobeMgrUtcYears | read-write | mandatory | The managers Coordinated Universal Time (UTC) years since 1900. By setting this value, the agent will create time record with its corresponding time and name. … |
| 1.3.6.1.4.1.2.6.2.13.7.3.2.1.10 | ScalaribmappnIsAcGlobeMgrUtcWdays | read-write | mandatory | The managers Coordinated Universal Time (UTC) days since Sunday. It contains an integer from 0 to 6. By setting this value, the agent will create time record w… |
| 1.3.6.1.4.1.2.6.2.13.7.3.2.1.11 | ScalaribmappnIsAcGlobeMgrUtcYdays | read-write | mandatory | The managers Coordinated Universal Time (UTC) days since January 1. It contains an integer from 0 to 365. By setting this value, the agent will create time rec… |
| 1.3.6.1.4.1.2.6.2.13.7.3.2.1.12 | ScalaribmappnIsAcGlobeMgrUtcIsdst | read-write | mandatory | The managers Coordinated Universal Time (UTC) daylight saving time flag. It is positive if daylight saving time is in effect. It is zero if daylight saving tim… |
| 1.3.6.1.4.1.2.6.2.13.7.3.2.1.13 | ScalaribmappnIsAcGlobeMgrName | read-write | mandatory | The name of the manager who set the manager UTC times or NULL if the manager name has not been set. It contains: a. the network id of the manager, b. a period … |
| 1.3.6.1.4.1.2.6.2.13.7.3.2.2 | TableibmappnIsAcBtypeTable | not-accessible | mandatory | Intermediate Session Accounting Buffer Type Table |
| 1.3.6.1.4.1.2.6.2.13.7.3.2.2.1 | RowibmappnIsAcBtypeEntry | not-accessible | mandatory | Entry of Intermediate Session Accounting Buffer Type Table. |
| 1.3.6.1.4.1.2.6.2.13.7.3.2.2.1.1 | ColumnibmappnIsAcBtypeMedia | read-only | mandatory | The media for storing the intermediate session accounting records. |
| 1.3.6.1.4.1.2.6.2.13.7.3.2.2.1.2 | ColumnibmappnIsAcBtypeActive | read-write | mandatory | Indicates whether or not the buffer media is active. 1. no: indicates the buffer media is not currently used for recording. 2. yes: indicates the buffer media … |
| 1.3.6.1.4.1.2.6.2.13.7.3.2.2.1.3 | ColumnibmappnIsAcBtypeDirName | read-only | mandatory | The name of the directory which will be used to allocate and write buffers of this type. For memory buffer types, this field will be NULL. |
| 1.3.6.1.4.1.2.6.2.13.7.3.2.2.1.4 | ColumnibmappnIsAcBtypePrdMaxBufs | read-only | mandatory | The maximum number of buffer medias supported by the product. |
| 1.3.6.1.4.1.2.6.2.13.7.3.2.2.1.5 | ColumnibmappnIsAcBtypeMaxBufs | read-write | mandatory | The maximum number of buffer medias which will be used for recording accounting information. This value must be in the range of zero to the Product Maximum. |
| 1.3.6.1.4.1.2.6.2.13.7.3.2.2.1.6 | ColumnibmappnIsAcBtypeCurBufs | read-only | mandatory | The current number of buffer media. This is the sum of all full and in use buffers of this type. |
| 1.3.6.1.4.1.2.6.2.13.7.3.2.2.1.7 | ColumnibmappnIsAcBtypePrdRecPerBuf | read-only | mandatory | The maximum number of records supported by the product. |
| 1.3.6.1.4.1.2.6.2.13.7.3.2.2.1.8 | ColumnibmappnIsAcBtypeRecPerBuf | read-write | mandatory | The maximum number of records which will be recorded in an individual buffer. This value must be in the range of zero to the Product Maximum. |
| 1.3.6.1.4.1.2.6.2.13.7.3.2.2.1.9 | ColumnibmappnIsAcBtypeRecFormat | read-write | mandatory | This defines the recording format of records. (1) ascii: records are recorded in ascii (english text format) (2) binary: records are recorded in binary (machin… |
| 1.3.6.1.4.1.2.6.2.13.7.3.2.2.1.10 | ColumnibmappnIsAcBtypeFullAction | read-write | mandatory | This defines the behaviour used when all buffer medias are full. (1) halt: stop creating new records (2) wrap: overwrite the existing records. |
| 1.3.6.1.4.1.2.6.2.13.7.3.2.2.1.11 | ColumnibmappnIsAcBtypeFullTime | read-only | mandatory | The time which the full condition was encountered. This time is represented in hundreds of a second since the node was started. 2**32-1 (4,294,967,295), and wr… |
| 1.3.6.1.4.1.2.6.2.13.7.3.2.2.1.12 | ColumnibmappnIsAcBtypeFullReason | read-only | mandatory | The reason the buffer media is full. (1) The media is not full. (2) The maximum number of buffers have been reach, all buffers are full and the full action is … |
| 1.3.6.1.4.1.2.6.2.13.7.3.2.2.1.13 | ColumnibmappnIsAcBtypeFullWraps | read-only | mandatory | The number of accounting records being overwritten due to buffer full situation. |
| 1.3.6.1.4.1.2.6.2.13.7.3.2.2.1.14 | ColumnibmappnIsAcBtypeFullLosts | read-only | mandatory | The number of new accounting records lost due to the buffer full situation. |
| 1.3.6.1.4.1.2.6.2.13.7.3.2.2.1.15 | ColumnibmappnIsAcBtypeErrorWraps | read-only | mandatory | The number of accounting records lost to due to other reasons, (e.g. I/O error, software error) while in a wrap condition. |
| 1.3.6.1.4.1.2.6.2.13.7.3.2.2.1.16 | ColumnibmappnIsAcBtypeErrorLosts | read-only | mandatory | The number of accounting records lost to due to other reasons, (e.g. I/O error, software error) while not in a full condition. |
| 1.3.6.1.4.1.2.6.2.13.7.3.2.2.1.17 | ColumnibmappnIsAcBtypeCheckPts | read-only | mandatory | The number of times a buffer of this type has been recorded to for checkpointing active intermediate sessions. |
| 1.3.6.1.4.1.2.6.2.13.7.3.2.2.1.18 | ColumnibmappnIsAcBtypePurges | read-only | mandatory | The number of times a buffer of this type has been purged. |
| 1.3.6.1.4.1.2.6.2.13.7.3.2.2.1.19 | ColumnibmappnIsAcBtypeDeletes | read-only | mandatory | The number of times an entry has been deleted from a buffer of this type. |
| 1.3.6.1.4.1.2.6.2.13.7.3.2.2.1.20 | ColumnibmappnIsAcBtypeResets | read-only | mandatory | The number of times the Btype counters have been reset as a result of a SET. |
| 1.3.6.1.4.1.2.6.2.13.7.3.2.2.1.21 | ColumnibmappnIsAcBtypeClearStats | read-write | mandatory | By setting this object to yes, all statistics for this media type will be cleared (set to zero); and the Btype reset counter will be incremented. Objects affec… |
| 1.3.6.1.4.1.2.6.2.13.7.3.2.3 | TableibmappnIsAcBufTable | not-accessible | mandatory | Intermediate Session Accounting Buffer Table |
| 1.3.6.1.4.1.2.6.2.13.7.3.2.3.1 | RowibmappnIsAcBufEntry | not-accessible | mandatory | Entry of Intermediate Session Accounting Buffer Table. |
| 1.3.6.1.4.1.2.6.2.13.7.3.2.3.1.1 | ColumnibmappnIsAcBufMedia | read-only | mandatory | The media for storing the intermediate session accounting records. |
| 1.3.6.1.4.1.2.6.2.13.7.3.2.3.1.2 | ColumnibmappnIsAcBufNumber | read-only | mandatory | Number of the buffer. Each time a new buffer is used for recording, an incremented number will be assigned. Thus, the order of in which the buffers filled can … |
| 1.3.6.1.4.1.2.6.2.13.7.3.2.3.1.3 | ColumnibmappnIsAcBufState | read-write | mandatory | The current buffer state. 1. complete: indicates the buffer is full or recording is not active for this buffer. In either case, the buffer is ready to be retri… |
| 1.3.6.1.4.1.2.6.2.13.7.3.2.3.1.4 | ColumnibmappnIsAcBufRecFormat | read-only | mandatory | This defines the recording format of records. (1) ascii: records are recorded in ascii (english text format) (2) binary: records are recorded in binary (machin… |
| 1.3.6.1.4.1.2.6.2.13.7.3.2.3.1.5 | ColumnibmappnIsAcBufMaxRecords | read-only | mandatory | The maximum number of records this buffer may contain. It is derived from the number of records per buffer set in the buffer type table. |
| 1.3.6.1.4.1.2.6.2.13.7.3.2.3.1.6 | ColumnibmappnIsAcBufOldestIndex | read-write | mandatory | The oldest accounting index contained in this buffer. By setting this object, all records with indexes less than this value will be deleted. The set value must… |
| 1.3.6.1.4.1.2.6.2.13.7.3.2.3.1.7 | ColumnibmappnIsAcBufNewestIndex | read-only | mandatory | The newest accounting index contained in this buffer. |
| 1.3.6.1.4.1.2.6.2.13.7.3.2.3.1.8 | ColumnibmappnIsAcBufName | read-only | mandatory | The name of the buffer. |
| 1.3.6.1.4.1.2.6.2.13.7.3.2.4 | TableibmappnIsAcTimeTable | not-accessible | mandatory | Intermediate Session Accounting Time Table |
| 1.3.6.1.4.1.2.6.2.13.7.3.2.4.1 | RowibmappnIsAcTimeEntry | not-accessible | mandatory | Entry of Intermediate Session Accounting Time Table. |
| 1.3.6.1.4.1.2.6.2.13.7.3.2.4.1.1 | ColumnibmappnIsAcTimeIndex | read-only | mandatory | Intermediate Session Time record index. It starts with 0, and increase up to maximum value of 2**31-1 (2,147,483,647), and wraps. |
| 1.3.6.1.4.1.2.6.2.13.7.3.2.4.1.2 | ColumnibmappnIsAcTimeEntryType | read-only | mandatory | Indicates whether the entry was made as the result of: 1. a SET to start collecting accounting data, or 2. a SET to stop collecting accounting data, or 3. the … |
| 1.3.6.1.4.1.2.6.2.13.7.3.2.4.1.3 | ColumnibmappnIsAcTimeForMedia | read-only | mandatory | This object qualifies the time entry type. It indicates the media type for which the entry occured. |
| 1.3.6.1.4.1.2.6.2.13.7.3.2.4.1.4 | ColumnibmappnIsAcTimeRecTime | read-only | mandatory | Intermediate Session Record time. It represents the time in hundreds of a second since the node was started. 2**32-1 (4,294,967,295), and wraps. |
| 1.3.6.1.4.1.2.6.2.13.7.3.2.4.1.5 | ColumnibmappnIsAcTimeAgtUtcSecs | read-only | mandatory | The agents Coordinated Universal Time (UTC) seconds. It contains an integer from 0 to 59. |
| 1.3.6.1.4.1.2.6.2.13.7.3.2.4.1.6 | ColumnibmappnIsAcTimeAgtUtcMins | read-only | mandatory | The agents Coordinated Universal Time (UTC) minutes. It contains an integer from 0 to 59. |
| 1.3.6.1.4.1.2.6.2.13.7.3.2.4.1.7 | ColumnibmappnIsAcTimeAgtUtcHours | read-only | mandatory | The agents Coordinated Universal Time (UTC) hours. It contains an integer from 0 to 23. |
| 1.3.6.1.4.1.2.6.2.13.7.3.2.4.1.8 | ColumnibmappnIsAcTimeAgtUtcMdays | read-only | mandatory | The agents Coordinated Universal Time (UTC) day of the month. It contains an integer from 1 to 31. |
| 1.3.6.1.4.1.2.6.2.13.7.3.2.4.1.9 | ColumnibmappnIsAcTimeAgtUtcMonths | read-only | mandatory | The agents Coordinated Universal Time (UTC) months since January. It contains an integer from 0 to 11. |
| 1.3.6.1.4.1.2.6.2.13.7.3.2.4.1.10 | ColumnibmappnIsAcTimeAgtUtcYears | read-only | mandatory | The agents Coordinated Universal Time (UTC) years since 1900. |
| 1.3.6.1.4.1.2.6.2.13.7.3.2.4.1.11 | ColumnibmappnIsAcTimeAgtUtcWdays | read-only | mandatory | The agents Coordinated Universal Time (UTC) days since Sunday. It contains an integer from 0 to 6. |
| 1.3.6.1.4.1.2.6.2.13.7.3.2.4.1.12 | ColumnibmappnIsAcTimeAgtUtcYdays | read-only | mandatory | The agents Coordinated Universal Time (UTC) days since January 1. It contains an integer from 0 to 365. |
| 1.3.6.1.4.1.2.6.2.13.7.3.2.4.1.13 | ColumnibmappnIsAcTimeAgtUtcIsdst | read-only | mandatory | The agents Coordinated Universal Time (UTC) daylight saving time flag. It is positive if daylight saving time is in effect. It is zero if daylight saving time … |
| 1.3.6.1.4.1.2.6.2.13.7.3.2.4.1.14 | ColumnibmappnIsAcTimeAgtName | read-only | mandatory | The name of the agent who set the agent UTC times. It contains: a. the network id of the agent, b. a period (.) c. the cp name of the agent. |
| 1.3.6.1.4.1.2.6.2.13.7.3.2.4.1.15 | ColumnibmappnIsAcTimeMgrUtcSecs | read-only | mandatory | The managers Coordinated Universal Time (UTC) seconds. It contains an integer from 0 to 59. |
| 1.3.6.1.4.1.2.6.2.13.7.3.2.4.1.16 | ColumnibmappnIsAcTimeMgrUtcMins | read-only | mandatory | The managers Coordinated Universal Time (UTC) minutes. It contains an integer from 0 to 59. |
| 1.3.6.1.4.1.2.6.2.13.7.3.2.4.1.17 | ColumnibmappnIsAcTimeMgrUtcHours | read-only | mandatory | The managers Coordinated Universal Time (UTC) hours. It contains an integer from 0 to 23. |
| 1.3.6.1.4.1.2.6.2.13.7.3.2.4.1.18 | ColumnibmappnIsAcTimeMgrUtcMdays | read-only | mandatory | The managers Coordinated Universal Time (UTC) day of the month. It contains an integer from 1 to 31; or 0 if the manager has not set this object. |
| 1.3.6.1.4.1.2.6.2.13.7.3.2.4.1.19 | ColumnibmappnIsAcTimeMgrUtcMonths | read-only | mandatory | The managers Coordinated Universal Time (UTC) months since January. It contains an integer from 0 to 11. |
| 1.3.6.1.4.1.2.6.2.13.7.3.2.4.1.20 | ColumnibmappnIsAcTimeMgrUtcYears | read-only | mandatory | The managers Coordinated Universal Time (UTC) years since 1900. |
| 1.3.6.1.4.1.2.6.2.13.7.3.2.4.1.21 | ColumnibmappnIsAcTimeMgrUtcWdays | read-only | mandatory | The managers Coordinated Universal Time (UTC) days since Sunday. It contains an integer from 0 to 6. |
| 1.3.6.1.4.1.2.6.2.13.7.3.2.4.1.22 | ColumnibmappnIsAcTimeMgrUtcYdays | read-only | mandatory | The managers Coordinated Universal Time (UTC) days since January 1. It contains an integer from 0 to 365. |
| 1.3.6.1.4.1.2.6.2.13.7.3.2.4.1.23 | ColumnibmappnIsAcTimeMgrUtcIsdst | read-only | mandatory | The managers Coordinated Universal Time (UTC) daylight saving time flag. It is positive if daylight saving time is in effect. It is zero if daylight saving tim… |
| 1.3.6.1.4.1.2.6.2.13.7.3.2.4.1.24 | ColumnibmappnIsAcTimeMgrName | read-only | mandatory | The name of the manager who set the manager UTC times or NULL if the manager name has not been set. It contains: a. the network id of the manager, b. a period … |
| 1.3.6.1.4.1.2.6.2.13.7.3.2.4.1.25 | ColumnibmappnIsAcTimeMgrTimeValid | read-write | mandatory | This indicates whether or not the the manager UTC times are valid. It is set by the manager if the manager determines the manager UTC times are valid. |
| 1.3.6.1.4.1.2.6.2.13.7.3.2.5 | TableibmappnIsAcDataTable | not-accessible | mandatory | Intermediate Session Accounting Data Table |
| 1.3.6.1.4.1.2.6.2.13.7.3.2.5.1 | RowibmappnIsAcDataEntry | not-accessible | mandatory | Entry of Intermediate Session Accounting Data Table. |
| 1.3.6.1.4.1.2.6.2.13.7.3.2.5.1.1 | ColumnibmappnIsAcIndex | read-only | mandatory | Session accounting record index. Upon initial startup, it will begin with 0, and increase up to maximum value of 2**31-1 (2,147,483,647), and wraps. Upon subse… |
| 1.3.6.1.4.1.2.6.2.13.7.3.2.5.1.2 | ColumnibmappnIsAcEntryType | read-only | mandatory | Indicates whether the entry was made as the result of: 1. a session starting or, 2. a session ending or, 3. a session threshold reached or 4. a session checkpo… |
| 1.3.6.1.4.1.2.6.2.13.7.3.2.5.1.3 | ColumnibmappnIsAcRecTime | read-only | mandatory | Intermediate Session Record time. It represents the time in hundreds of a second since the node was started. 2**32-1 (4,294,967,295), and wraps. |
| 1.3.6.1.4.1.2.6.2.13.7.3.2.5.1.4 | ColumnibmappnIsAcFqLuName | read-only | mandatory | The network-qualified CP name or PU name of the node at which the session and pcid originated. For APPN and LEN nodes, this is either CP name of the APPN node … |
| 1.3.6.1.4.1.2.6.2.13.7.3.2.5.1.5 | ColumnibmappnIsAcPcid | read-only | mandatory | The procedure correlation identifier (pcid) of a session. It is an 8-octet value assigned by the primary LU. |
| 1.3.6.1.4.1.2.6.2.13.7.3.2.5.1.6 | ColumnibmappnIsAcPriLuName | read-only | mandatory | Primary LU Name of the session. |
| 1.3.6.1.4.1.2.6.2.13.7.3.2.5.1.7 | ColumnibmappnIsAcSecLuName | read-only | mandatory | Secondary LU Name of the session. |
| 1.3.6.1.4.1.2.6.2.13.7.3.2.5.1.8 | ColumnibmappnIsAcModeName | read-only | mandatory | The mode name used for this session |
| 1.3.6.1.4.1.2.6.2.13.7.3.2.5.1.9 | ColumnibmappnIsAcCosName | read-only | mandatory | The class of service (cos) used for this session |
| 1.3.6.1.4.1.2.6.2.13.7.3.2.5.1.10 | ColumnibmappnIsAcTransPriority | read-only | mandatory | Transmission priority for this session. The values are: 1. Low 2. Medium 3. High 4. Network |
| 1.3.6.1.4.1.2.6.2.13.7.3.2.5.1.11 | ColumnibmappnIsAcSessType | read-only | mandatory | The type of intermediate session. |
| 1.3.6.1.4.1.2.6.2.13.7.3.2.5.1.12 | ColumnibmappnIsAcSessState | read-only | mandatory | Indicates the state of the session. 1. session is pending inactive or, 2. session is pending active or, 3. session is active or, 4. session is inactive |
| 1.3.6.1.4.1.2.6.2.13.7.3.2.5.1.13 | ColumnibmappnIsAcSessStartTime | read-only | mandatory | Time when the session started in hundreds of a second. |
| 1.3.6.1.4.1.2.6.2.13.7.3.2.5.1.14 | ColumnibmappnIsAcSessUpTime | read-only | mandatory | Length of time the session has been active in hundreds of a second. |
| 1.3.6.1.4.1.2.6.2.13.7.3.2.5.1.15 | ColumnibmappnIsAcCtrUpTime | read-only | mandatory | Length of time the session counters have been active in hundreds of a second. |
| 1.3.6.1.4.1.2.6.2.13.7.3.2.5.1.16 | ColumnibmappnIsAcEndReason | read-only | mandatory | The SNA sense code which resulted when the session ended. |
| 1.3.6.1.4.1.2.6.2.13.7.3.2.5.1.17 | ColumnibmappnIsAcP2SFmdPius | read-only | mandatory | The number of FMD PIU's sent from the primary LU to the secondary LU. The counter has a range of of 0 to 2**32; and then wraps. |
| 1.3.6.1.4.1.2.6.2.13.7.3.2.5.1.18 | ColumnibmappnIsAcS2PFmdPius | read-only | mandatory | The number of FMD PIU's sent from the secondary LU to the primary LU. The counter has a range of of 0 to 2**32; and then wraps. |
| 1.3.6.1.4.1.2.6.2.13.7.3.2.5.1.19 | ColumnibmappnIsAcP2SNonFmdPius | read-only | mandatory | The number of non-FMD PIU's sent from the primary LU to the secondary LU. The counter has a range of of 0 to 2**32; and then wraps. |
| 1.3.6.1.4.1.2.6.2.13.7.3.2.5.1.20 | ColumnibmappnIsAcS2PNonFmdPius | read-only | mandatory | The number of non-FMD PIU's sent from the secondary LU to the primary LU. The counter has a range of of 0 to 2**32; and then wraps. |
| 1.3.6.1.4.1.2.6.2.13.7.3.2.5.1.21 | ColumnibmappnIsAcP2SFmdBytes | read-only | mandatory | The number of FMD bytes sent from the primary LU to the secondary LU. The counter has a range of of 0 to 2**32; and then wraps. |
| 1.3.6.1.4.1.2.6.2.13.7.3.2.5.1.22 | ColumnibmappnIsAcS2PFmdBytes | read-only | mandatory | The number of FMD bytes sent from the secondary LU to the primary LU. The counter has a range of of 0 to 2**32; and then wraps. |
| 1.3.6.1.4.1.2.6.2.13.7.3.2.5.1.23 | ColumnibmappnIsAcP2SNonFmdBytes | read-only | mandatory | The number of non-FMD bytes sent from the primary LU to the secondary LU. The counter has a range of of 0 to 2**32; and then wraps. |
| 1.3.6.1.4.1.2.6.2.13.7.3.2.5.1.24 | ColumnibmappnIsAcS2PNonFmdBytes | read-only | mandatory | The number of non-FMD bytes sent from the secondary LU to the primary LU. The counter has a range of of 0 to 2**32; and then wraps. |
| 1.3.6.1.4.1.2.6.2.13.7.3.2.5.1.25 | ColumnibmappnIsAcRouteInfo | read-only | mandatory | The route selection control vector (RSCV x'2B') used for this session. It is present for APPN nodes; but is not present for LEN nodes. |
| 1.3.6.1.4.1.2.6.2.13.8 | NodeibmappnConversation | |||
| 1.3.6.1.4.1.2.6.2.13.8.1 | NodeibmappnConvGeneral | |||
| 1.3.6.1.4.1.2.6.2.13.8.2 | NodeibmappnConvEndPoint | |||
| 1.3.6.1.4.1.2.6.2.14 | Nodeibmrpq | |||
| 1.3.6.1.4.1.2.6.2.15 | Nodeibmtb | |||
| 1.3.6.1.4.1.2.6.2.15.1 | Nodeibmdot1dBase | |||
| 1.3.6.1.4.1.2.6.2.15.1.1 | Scalaribmdot1dBaseBridgeAddress | read-only | mandatory | The MAC address used by this bridge when it must be referred to in a unique fashion. It is recommended that this be the numerically smallest MAC address of all… |
| 1.3.6.1.4.1.2.6.2.15.1.2 | Scalaribmdot1dBaseNumPorts | read-only | mandatory | The number of TB ports controlled by this bridging entity. |
| 1.3.6.1.4.1.2.6.2.15.1.3 | Scalaribmdot1dBaseType | read-only | mandatory | Indicates what type of bridging this bridge can perform. If a bridge is actually performing a certain type of bridging this will be indicated by entries in the… |
| 1.3.6.1.4.1.2.6.2.15.1.4 | Tableibmdot1dBasePortTable | not-accessible | mandatory | A table that contains generic information about every port that is associated with this bridge. |
| 1.3.6.1.4.1.2.6.2.15.1.4.1 | Rowibmdot1dBasePortEntry | not-accessible | mandatory | A list of information for each port of the bridge. |
| 1.3.6.1.4.1.2.6.2.15.1.4.1.1 | Columnibmdot1dBasePort | read-only | mandatory | The port number of the port for which this entry contains bridge management information. |
| 1.3.6.1.4.1.2.6.2.15.1.4.1.2 | Columnibmdot1dBasePortIfIndex | read-only | mandatory | The value of the instance of the ifIndex object, defined in RFC 1156, RFC 1213 for the interface corresponding to this port. |
| 1.3.6.1.4.1.2.6.2.15.1.4.1.3 | Columnibmdot1dBasePortCircuit | read-only | mandatory | For a port which potentially has the same value of ibmdot1dBasePortIfIndex as another port on the same bridge, this object contains an identifier unique to thi… |
| 1.3.6.1.4.1.2.6.2.15.1.4.1.4 | Columnibmdot1dBasePortDelayExceededDiscards | read-only | mandatory | The number of frames discarded by this port due to excessive transit delay through the bridge. |
| 1.3.6.1.4.1.2.6.2.15.1.4.1.5 | Columnibmdot1dBasePortMtuExceededDiscards | read-only | mandatory | The number of frames discarded by this port due to an excessive size. |
| 1.3.6.1.4.1.2.6.2.15.2 | Nodeibmdot1dStp | |||
| 1.3.6.1.4.1.2.6.2.15.2.1 | Scalaribmdot1dStpProtocolSpecification | read-only | mandatory | An indication of what version of the Spanning Tree Protocol is being run. The value 'decLb100(2)' indicates the DEC LANbridge 100 Spanning Tree protocol. IEEE … |
| 1.3.6.1.4.1.2.6.2.15.2.2 | Scalaribmdot1dStpPriority | read-write | mandatory | The value of the write-able portion of the Bridge ID, i.e., the first two octets of the (8 octet long) Bridge ID. The other (last) 6 octets of the Bridge ID ar… |
| 1.3.6.1.4.1.2.6.2.15.2.3 | Scalaribmdot1dStpTimeSinceTopologyChange | read-only | mandatory | The time (in hundredths of a second) since the last time a topology change was detected by the bridge entity. |
| 1.3.6.1.4.1.2.6.2.15.2.4 | Scalaribmdot1dStpTopChanges | read-only | mandatory | The total number of topology changes detected by this bridge since the management entity was last reset or initialized. |
| 1.3.6.1.4.1.2.6.2.15.2.5 | Scalaribmdot1dStpDesignatedRoot | read-only | mandatory | The bridge identifier of the root of the spanning tree as determined by the Spanning Tree Protocol as executed by this node. This value is used as the Root Ide… |
| 1.3.6.1.4.1.2.6.2.15.2.6 | Scalaribmdot1dStpRootCost | read-only | mandatory | The cost of the path to the root as seen from this bridge. |
| 1.3.6.1.4.1.2.6.2.15.2.7 | Scalaribmdot1dStpRootPort | read-only | mandatory | The port number of the port which offers the lowest cost path from this bridge to the root bridge. |
| 1.3.6.1.4.1.2.6.2.15.2.8 | Scalaribmdot1dStpMaxAge | read-only | mandatory | The maximum age of Spanning Tree Protocol information learned from the network on any port before it is discarded, in units of hundredths of a second. This is … |
| 1.3.6.1.4.1.2.6.2.15.2.9 | Scalaribmdot1dStpHelloTime | read-only | mandatory | The amount of time between the transmission of Configuration bridge PDUs by this node on any port when it is the root of the spanning tree or trying to become … |
| 1.3.6.1.4.1.2.6.2.15.2.10 | Scalaribmdot1dStpHoldTime | read-only | mandatory | This time value determines the interval length during which no more than two Configuration bridge PDUs shall be transmitted by this node, in units of hundredth… |
| 1.3.6.1.4.1.2.6.2.15.2.11 | Scalaribmdot1dStpForwardDelay | read-only | mandatory | This time value, measured in units of hundredths of a second, controls how fast a port changes its spanning state when moving towards the Forwarding state. The… |
| 1.3.6.1.4.1.2.6.2.15.2.12 | Scalaribmdot1dStpBridgeMaxAge | read-write | mandatory | The value that all bridges use for MaxAge when this bridge is acting as the root. Note that 802.1d/D9 specifies that the range for this parameter is related to… |
| 1.3.6.1.4.1.2.6.2.15.2.13 | Scalaribmdot1dStpBridgeHelloTime | read-write | mandatory | The value that all bridges use for HelloTime when this bridge is acting as the root. The granularity of this timer is specified by 802.1d/D9 to be 1 second. An… |
| 1.3.6.1.4.1.2.6.2.15.2.14 | Scalaribmdot1dStpBridgeForwardDelay | read-write | mandatory | The value that all bridges use for ForwardDelay when this bridge is acting as the root. Note that 802.1d/D9 specifies that the range for this parameter is rela… |
| 1.3.6.1.4.1.2.6.2.15.2.15 | Tableibmdot1dStpPortTable | not-accessible | mandatory | A table that contains port-specific information for the Spanning Tree Protocol. |
| 1.3.6.1.4.1.2.6.2.15.2.15.1 | Rowibmdot1dStpPortEntry | not-accessible | mandatory | A list of information maintained by every port about the Spanning Tree Protocol state for that port. |
| 1.3.6.1.4.1.2.6.2.15.2.15.1.1 | Columnibmdot1dStpPort | read-only | mandatory | The port number of the port for which this entry contains Spanning Tree Protocol management information. This port number is the same as that reported by ibmdo… |
| 1.3.6.1.4.1.2.6.2.15.2.15.1.2 | Columnibmdot1dStpPortPriority | read-write | mandatory | The value of the priority field which is contained in the first (in network byte order) octet of the (2 octet long) Port ID. The other octet of the Port ID is … |
| 1.3.6.1.4.1.2.6.2.15.2.15.1.3 | Columnibmdot1dStpPortState | read-only | mandatory | The port's current state as defined by application of the Spanning Tree Protocol. This state controls what action a port takes on reception of a frame. If the … |
| 1.3.6.1.4.1.2.6.2.15.2.15.1.4 | Columnibmdot1dStpPortEnable | read-write | mandatory | The enabled/disabled status of the port. |
| 1.3.6.1.4.1.2.6.2.15.2.15.1.5 | Columnibmdot1dStpPortPathCost | read-write | mandatory | The contribution of this port to the path cost of paths towards the spanning tree root which include this port. The IBM 6611 Network Processor obtains this val… |
| 1.3.6.1.4.1.2.6.2.15.2.15.1.6 | Columnibmdot1dStpPortDesignatedRoot | read-only | mandatory | The unique Bridge Identifier of the Bridge recorded as the Root in the Configuration BPDUs transmitted by the Designated Bridge for the segment to which the po… |
| 1.3.6.1.4.1.2.6.2.15.2.15.1.7 | Columnibmdot1dStpPortDesignatedCost | read-only | mandatory | The path cost of the Designated Port of the segment connected to this port. This value is compared to the Root Path Cost field in received bridge PDUs. |
| 1.3.6.1.4.1.2.6.2.15.2.15.1.8 | Columnibmdot1dStpPortDesignatedBridge | read-only | mandatory | The Bridge Identifier of the bridge which this port considers to be the Designated Bridge for this port's segment. |
| 1.3.6.1.4.1.2.6.2.15.2.15.1.9 | Columnibmdot1dStpPortDesignatedPort | read-only | mandatory | The Port Identifier of the port on the Designated Bridge for this port's segment. |
| 1.3.6.1.4.1.2.6.2.15.2.15.1.10 | Columnibmdot1dStpPortForwardTransitions | read-only | mandatory | The number of times this port has transitioned from the Learning state to the Forwarding state. |
| 1.3.6.1.4.1.2.6.2.15.3 | Nodeibmdot1dTp | |||
| 1.3.6.1.4.1.2.6.2.15.3.1 | Scalaribmdot1dTpLearnedEntryDiscards | read-only | mandatory | The total number of Forwarding Database entries, which have been or would have been learnt, but have been discarded due to a lack of space to store them in the… |
| 1.3.6.1.4.1.2.6.2.15.3.2 | Scalaribmdot1dTpAgingTime | read-write | mandatory | The timeout period in seconds for aging out dynamically learned forwarding information. The IBM 6611 Network Processor obtains this value from the 'Aging Time'… |
| 1.3.6.1.4.1.2.6.2.15.3.3 | Tableibmdot1dTpFdbTable | not-accessible | mandatory | A table that contains information about unicast entries for which the bridge has forwarding and/or filtering information. This information is used by the trans… |
| 1.3.6.1.4.1.2.6.2.15.3.3.1 | Rowibmdot1dTpFdbEntry | not-accessible | mandatory | Information about a specific unicast MAC address for which the bridge has some forwarding and/or filtering information. |
| 1.3.6.1.4.1.2.6.2.15.3.3.1.1 | Columnibmdot1dTpFdbAddress | read-only | mandatory | A unicast MAC address for which the bridge has forwarding and/or filtering information. |
| 1.3.6.1.4.1.2.6.2.15.3.3.1.2 | Columnibmdot1dTpFdbPort | read-only | mandatory | Either the value '0', or the port number of the port on which a frame having a source address equal to the value of the corresponding instance of ibmdot1dTpFdb… |
| 1.3.6.1.4.1.2.6.2.15.3.3.1.3 | Columnibmdot1dTpFdbStatus | read-only | mandatory | The status of this entry. The meanings of the values are: other(1) : none of the following. This would include the case where some other MIB object (not the co… |
| 1.3.6.1.4.1.2.6.2.15.3.4 | Tableibmdot1dTpPortTable | not-accessible | mandatory | A table that contains information about every port that is associated with this transparent bridge. |
| 1.3.6.1.4.1.2.6.2.15.3.4.1 | Rowibmdot1dTpPortEntry | not-accessible | mandatory | A list of information for each port of a transparent bridge. |
| 1.3.6.1.4.1.2.6.2.15.3.4.1.1 | Columnibmdot1dTpPort | read-only | mandatory | The port number of the port for which this entry contains Transparent bridging management information. |
| 1.3.6.1.4.1.2.6.2.15.3.4.1.2 | Columnibmdot1dTpPortMaxInfo | read-only | mandatory | The maximum size of the INFO (non-MAC) field that this port will receive or transmit. |
| 1.3.6.1.4.1.2.6.2.15.3.4.1.3 | Columnibmdot1dTpPortInFrames | read-only | mandatory | The number of frames that have been received by this port from its segment. Note that a frame received on the interface corresponding to this port is only coun… |
| 1.3.6.1.4.1.2.6.2.15.3.4.1.4 | Columnibmdot1dTpPortOutFrames | read-only | mandatory | The number of frames that have been transmitted by this port to its segment. Note that a frame transmitted on the interface corresponding to this port is only … |
| 1.3.6.1.4.1.2.6.2.15.3.4.1.5 | Columnibmdot1dTpPortInDiscards | read-only | mandatory | Count of valid frames received which were discarded (i.e., filtered) by the Forwarding Process. |
| 1.3.6.1.4.1.2.6.2.15.4 | Nodeibmdot1dStatic | |||
| 1.3.6.1.4.1.2.6.2.15.4.1 | Tableibmdot1dStaticTable | not-accessible | mandatory | A table containing filtering information configured into the bridge by (local or network) management specifying the set of ports to which frames received from … |
| 1.3.6.1.4.1.2.6.2.15.4.1.1 | Rowibmdot1dStaticEntry | not-accessible | mandatory | Filtering information configured into the bridge by (local or network) management specifying the set of ports to which frames received from a specific port and… |
| 1.3.6.1.4.1.2.6.2.15.4.1.1.1 | Columnibmdot1dStaticAddress | read-write | mandatory | The destination MAC address in a frame to which this entry's filtering information applies. This object can take the value of a unicast address, a group addres… |
| 1.3.6.1.4.1.2.6.2.15.4.1.1.2 | Columnibmdot1dStaticReceivePort | read-write | mandatory | Either the value '0', or the port number of the port from which a frame must be received in order for this entry's filtering information to apply. A value of z… |
| 1.3.6.1.4.1.2.6.2.15.4.1.1.3 | Columnibmdot1dStaticAllowedToGoTo | read-write | mandatory | The set of ports to which frames received from a specific port and destined for a specific MAC address, are allowed to be forwarded. Each octet within the valu… |
| 1.3.6.1.4.1.2.6.2.15.4.1.1.4 | Columnibmdot1dStaticStatus | read-write | mandatory | This object indicates the status of this entry. other(1) - this entry is currently in use but the conditions under which it will remain so are different from e… |
| 1.3.6.1.4.1.2.6.2.15.5 | NodeibmtbMACAddressFilters | |||
| 1.3.6.1.4.1.2.6.2.15.5.1 | TableibmtbmacFiltInfoTable | not-accessible | mandatory | Table of MAC address filtering information. |
| 1.3.6.1.4.1.2.6.2.15.5.1.1 | RowibmtbmacFiltInfoEntry | not-accessible | mandatory | MAC address filtering information for a single interface. |
| 1.3.6.1.4.1.2.6.2.15.5.1.1.1 | ColumnibmtbmacFiltIfIndex | read-only | mandatory | The value of this object identifies the interface for which this entry contains management information. The value of this object for a particular interface has… |
| 1.3.6.1.4.1.2.6.2.15.5.1.1.2 | ColumnibmtbmacFiltInFilterType | read-only | mandatory | For the incoming filter table, determines whether the entries are permit or deny entries. |
| 1.3.6.1.4.1.2.6.2.15.5.1.1.3 | ColumnibmtbmacFiltOutFilterType | read-only | mandatory | For the outgoing filter table, determines whether the entries are permit or deny entries. |
| 1.3.6.1.4.1.2.6.2.15.5.1.1.4 | ColumnibmtbmacFiltInNotForwarded | read-only | mandatory | Number of packets not forwarded, in the incoming direction, because they were filtered out. |
| 1.3.6.1.4.1.2.6.2.15.5.1.1.5 | ColumnibmtbmacFiltOutNotForwarded | read-only | mandatory | Number of packets not forwarded, in the outgoing direction, because they were filtered out. |
| 1.3.6.1.4.1.2.6.2.15.5.2 | TableibmtbmacFiltInTable | not-accessible | mandatory | Table of MAC address filtering information for incoming frames. |
| 1.3.6.1.4.1.2.6.2.15.5.2.1 | RowibmtbmacFiltInEntry | not-accessible | mandatory | Filtering information for incoming frames. |
| 1.3.6.1.4.1.2.6.2.15.5.2.1.1 | ColumnibmtbmacFiltInIfIndex | read-only | mandatory | The value of this object identifies the interface for which this entry contains management information. The value of this object for a particular interface has… |
| 1.3.6.1.4.1.2.6.2.15.5.2.1.2 | ColumnibmtbmacFiltInSrcAddress | read-only | mandatory | MAC source address to be filtered. |
| 1.3.6.1.4.1.2.6.2.15.5.2.1.3 | ColumnibmtbmacFiltInSrcMask | read-only | mandatory | Mask to allow ibmtbmacFiltInSrcAddress to be used as a range of values. |
| 1.3.6.1.4.1.2.6.2.15.5.2.1.4 | ColumnibmtbmacFiltInDestAddress | read-only | mandatory | MAC destination address to be filtered. |
| 1.3.6.1.4.1.2.6.2.15.5.2.1.5 | ColumnibmtbmacFiltInDestMask | read-only | mandatory | Mask to allow ibmtbmacFiltInDestAddress to be used as a range of values. |
| 1.3.6.1.4.1.2.6.2.15.5.3 | TableibmtbmacFiltOutTable | not-accessible | mandatory | Table of MAC address filtering information for outgoing frames. |
| 1.3.6.1.4.1.2.6.2.15.5.3.1 | RowibmtbmacFiltOutEntry | not-accessible | mandatory | Filtering information for outgoing frames. |
| 1.3.6.1.4.1.2.6.2.15.5.3.1.1 | ColumnibmtbmacFiltOutIfIndex | read-only | mandatory | The value of this object identifies the interface for which this entry contains management information. The value of this object for a particular interface has… |
| 1.3.6.1.4.1.2.6.2.15.5.3.1.2 | ColumnibmtbmacFiltOutSrcAddress | read-only | mandatory | MAC source address to be filtered. |
| 1.3.6.1.4.1.2.6.2.15.5.3.1.3 | ColumnibmtbmacFiltOutSrcMask | read-only | mandatory | Mask to allow ibmtbmacFiltOutSrcAddress to be used as a range of values. |
| 1.3.6.1.4.1.2.6.2.15.5.3.1.4 | ColumnibmtbmacFiltOutDestAddress | read-only | mandatory | MAC destination address to be filtered. |
| 1.3.6.1.4.1.2.6.2.15.5.3.1.5 | ColumnibmtbmacFiltOutDestMask | read-only | mandatory | Mask to allow ibmtbmacFiltOutDestAddress to be used as a range of values. |
| 1.3.6.1.4.1.2.6.2.15.6 | NodeibmtbSAPFilters | |||
| 1.3.6.1.4.1.2.6.2.15.6.1 | TableibmtbsapFiltInfoTable | not-accessible | mandatory | Table of SAP filtering information. |
| 1.3.6.1.4.1.2.6.2.15.6.1.1 | RowibmtbsapFiltInfoEntry | not-accessible | mandatory | SAP filtering information for a single interface. |
| 1.3.6.1.4.1.2.6.2.15.6.1.1.1 | ColumnibmtbsapFiltIfIndex | read-only | mandatory | The value of this object identifies the interface for which this entry contains management information. The value of this object for a particular interface has… |
| 1.3.6.1.4.1.2.6.2.15.6.1.1.2 | ColumnibmtbsapFiltIn | read-only | mandatory | A bitmap of all possible source SAPs (even) that will be on or off depending on whether or not an incoming frame with that SAP is to be forwarded. |
| 1.3.6.1.4.1.2.6.2.15.6.1.1.3 | ColumnibmtbsapFiltOut | read-only | mandatory | A bitmap of all possible source SAPs (even) that will be on or off depending on whether or not an outgoing frame with that SAP is to be forwarded. |
| 1.3.6.1.4.1.2.6.2.15.6.1.1.4 | ColumnibmtbsapFiltInNotForwarded | read-only | mandatory | Number of packets not forwarded, in the incoming direction, because they were filtered out. |
| 1.3.6.1.4.1.2.6.2.15.6.1.1.5 | ColumnibmtbsapFiltOutNotForwarded | read-only | mandatory | Number of packets not forwarded, in the outgoing direction, because they were filtered out. |
| 1.3.6.1.4.1.2.6.2.15.7 | NodeibmtbEthTypeFilters | |||
| 1.3.6.1.4.1.2.6.2.15.7.1 | TableibmtbEthTypeFiltInfoTable | not-accessible | mandatory | Table of Ethernet type filtering information. Note that this filtering only applies to: 1) The Ethernet TYPE field for DIX version 2 frames. 2) The Ethernet TY… |
| 1.3.6.1.4.1.2.6.2.15.7.1.1 | RowibmtbEthTypeFiltInfoEntry | not-accessible | mandatory | Ethernet type filtering information for a single interface. |
| 1.3.6.1.4.1.2.6.2.15.7.1.1.1 | ColumnibmtbEthTypeFiltIfIndex | read-only | mandatory | The value of this object identifies the interface for which this entry contains management information. The value of this object for a particular interface has… |
| 1.3.6.1.4.1.2.6.2.15.7.1.1.2 | ColumnibmtbEthTypeFiltInFilterType | read-only | mandatory | For the incoming Ethernet type filter table, determines whether the entries are permit or deny entries. |
| 1.3.6.1.4.1.2.6.2.15.7.1.1.3 | ColumnibmtbEthTypeFiltOutFilterType | read-only | mandatory | For the outgoing Ethernet type filter table, determines whether the entries are permit or deny entries. |
| 1.3.6.1.4.1.2.6.2.15.7.1.1.4 | ColumnibmtbEthTypeFiltInNotForwarded | read-only | mandatory | Number of packets not forwarded, in the incoming direction, because they were filtered out. |
| 1.3.6.1.4.1.2.6.2.15.7.1.1.5 | ColumnibmtbEthTypeFiltOutNotForwarded | read-only | mandatory | Number of packets not forwarded, in the outgoing direction, because they were filtered out. |
| 1.3.6.1.4.1.2.6.2.15.7.2 | TableibmtbEthTypeFiltInTable | not-accessible | mandatory | Table of Ethernet type filtering information for incoming frames. Note that this filtering only applies to: 1) The Ethernet TYPE field for DIX version 2 frames… |
| 1.3.6.1.4.1.2.6.2.15.7.2.1 | RowibmtbEthTypeFiltInEntry | not-accessible | mandatory | Filtering information for a single Ethernet type on a single interface. |
| 1.3.6.1.4.1.2.6.2.15.7.2.1.1 | ColumnibmtbEthTypeFiltInIfIndex | read-only | mandatory | The value of this object identifies the interface for which this entry contains management information. The value of this object for a particular interface has… |
| 1.3.6.1.4.1.2.6.2.15.7.2.1.2 | ColumnibmtbEthTypeFiltInValue | read-only | mandatory | Indicates which Ethernet type to filter. |
| 1.3.6.1.4.1.2.6.2.15.7.2.1.3 | ColumnibmtbEthTypeFiltInMask | read-only | mandatory | Mask to allow ibmtbEthTypeFiltInValue to be used as a range of values. |
| 1.3.6.1.4.1.2.6.2.15.7.3 | TableibmtbEthTypeFiltOutTable | not-accessible | mandatory | Table of Ethernet type filtering information for outgoing frames. Note that this filtering only applies to: 1) The Ethernet TYPE field for DIX version 2 frames… |
| 1.3.6.1.4.1.2.6.2.15.7.3.1 | RowibmtbEthTypeFiltOutEntry | not-accessible | mandatory | Filtering information for a single Ethernet type on a single interface. |
| 1.3.6.1.4.1.2.6.2.15.7.3.1.1 | ColumnibmtbEthTypeFiltOutIfIndex | read-only | mandatory | The value of this object identifies the interface for which this entry contains management information. The value of this object for a particular interface has… |
| 1.3.6.1.4.1.2.6.2.15.7.3.1.2 | ColumnibmtbEthTypeFiltOutValue | read-only | mandatory | Indicates which Ethernet type to filter. |
| 1.3.6.1.4.1.2.6.2.15.7.3.1.3 | ColumnibmtbEthTypeFiltOutMask | read-only | mandatory | Mask to allow ibmtbEthTypeFiltOutValue to be used as a range of values. |
| 1.3.6.1.4.1.2.6.2.15.8 | NodeibmtbWindowFilters | |||
| 1.3.6.1.4.1.2.6.2.15.8.1 | TableibmtbwinFiltInfoTable | not-accessible | mandatory | Table of Window filtering information. |
| 1.3.6.1.4.1.2.6.2.15.8.1.1 | RowibmtbwinFiltInfoEntry | not-accessible | mandatory | Window filtering information for a single interface. |
| 1.3.6.1.4.1.2.6.2.15.8.1.1.1 | ColumnibmtbwinFiltIfIndex | read-only | mandatory | The value of this object identifies the interface for which this entry contains management information. The value of this object for a particular interface has… |
| 1.3.6.1.4.1.2.6.2.15.8.1.1.2 | ColumnibmtbwinFiltInFilterType | read-only | mandatory | For the incoming filter table, determines whether the entries are permit or deny entries. |
| 1.3.6.1.4.1.2.6.2.15.8.1.1.3 | ColumnibmtbwinFiltOutFilterType | read-only | mandatory | For the outgoing filter table, determines whether the entries are permit or deny entries. |
| 1.3.6.1.4.1.2.6.2.15.8.1.1.4 | ColumnibmtbwinFiltInNotForwarded | read-only | mandatory | Number of packets not forwarded, in the incoming direction, because they were filtered out. |
| 1.3.6.1.4.1.2.6.2.15.8.1.1.5 | ColumnibmtbwinFiltOutNotForwarded | read-only | mandatory | Number of packets not forwarded, in the outgoing direction, because they were filtered out. |
| 1.3.6.1.4.1.2.6.2.15.8.2 | TableibmtbwinFiltInTable | not-accessible | mandatory | Table of Window filtering information for incoming frames. |
| 1.3.6.1.4.1.2.6.2.15.8.2.1 | RowibmtbwinFiltInEntry | not-accessible | mandatory | Filtering information for incoming frames. |
| 1.3.6.1.4.1.2.6.2.15.8.2.1.1 | ColumnibmtbwinFiltInIfIndex | read-only | mandatory | The value of this object identifies the interface for which this entry contains management information. The value of this object for a particular interface has… |
| 1.3.6.1.4.1.2.6.2.15.8.2.1.2 | ColumnibmtbwinFiltInContents | read-only | mandatory | String of bytes that will be compared with bytes in the frame. |
| 1.3.6.1.4.1.2.6.2.15.8.2.1.3 | ColumnibmtbwinFiltInMaskString | read-only | mandatory | String of bytes that will be masked with bytes in the contents field. |
| 1.3.6.1.4.1.2.6.2.15.8.2.1.4 | ColumnibmtbwinFiltInOffsetStart | read-only | mandatory | Determines the starting point where the contents field should be applied. A value of 'MAC' means the base is at the beginning of the destination MAC address fi… |
| 1.3.6.1.4.1.2.6.2.15.8.2.1.5 | ColumnibmtbwinFiltInNumBytes | read-only | mandatory | Number of bytes in the contents field that are used for filtering |
| 1.3.6.1.4.1.2.6.2.15.8.2.1.6 | ColumnibmtbwinFiltInOffset | read-only | mandatory | Number of bytes offset into the frame from the offset start point to begin the compare. |
| 1.3.6.1.4.1.2.6.2.15.8.2.1.7 | ColumnibmtbwinFiltInId | read-only | mandatory | A unique identifier associated with this window filter entry. |
| 1.3.6.1.4.1.2.6.2.15.8.3 | TableibmtbwinFiltOutTable | not-accessible | mandatory | Table of Window filtering information for outgoing frames. |
| 1.3.6.1.4.1.2.6.2.15.8.3.1 | RowibmtbwinFiltOutEntry | not-accessible | mandatory | Filtering information for outgoing frames. |
| 1.3.6.1.4.1.2.6.2.15.8.3.1.1 | ColumnibmtbwinFiltOutIfIndex | read-only | mandatory | The value of this object identifies the interface for which this entry contains management information. The value of this object for a particular interface has… |
| 1.3.6.1.4.1.2.6.2.15.8.3.1.2 | ColumnibmtbwinFiltOutContents | read-only | mandatory | String of bytes that will be compared with bytes in the frame. |
| 1.3.6.1.4.1.2.6.2.15.8.3.1.3 | ColumnibmtbwinFiltOutMaskString | read-only | mandatory | String of bytes that will be masked with bytes in the contents field. |
| 1.3.6.1.4.1.2.6.2.15.8.3.1.4 | ColumnibmtbwinFiltOutOffsetStart | read-only | mandatory | Determines the starting point where the contents field should be applied. A value of 'MAC' means the base is at the beginning of the destination MAC address fi… |
| 1.3.6.1.4.1.2.6.2.15.8.3.1.5 | ColumnibmtbwinFiltOutNumBytes | read-only | mandatory | Number of bytes in the contents field that are used for filtering |
| 1.3.6.1.4.1.2.6.2.15.8.3.1.6 | ColumnibmtbwinFiltOutOffset | read-only | mandatory | Number of bytes offset into the frame from the offset start point to begin the compare. |
| 1.3.6.1.4.1.2.6.2.15.8.3.1.7 | ColumnibmtbwinFiltOutId | read-only | mandatory | A unique identifier associated with this window filter entry. |
| 1.3.6.1.4.1.2.6.2.15.9 | NodeibmtbFiltOrderTable | |||
| 1.3.6.1.4.1.2.6.2.15.9.1 | TableibmtbFiltOrderInTable | not-accessible | mandatory | Table of information describing which order the filters are applied for incoming frames. |
| 1.3.6.1.4.1.2.6.2.15.9.1.1 | RowibmtbFiltOrderInEntry | not-accessible | mandatory | Filter order information for incoming frames. |
| 1.3.6.1.4.1.2.6.2.15.9.1.1.1 | ColumnibmtbFiltOrderInIfIndex | read-only | mandatory | The value of this object identifies the interface for which this entry contains management information. The value of this object for a particular interface has… |
| 1.3.6.1.4.1.2.6.2.15.9.1.1.2 | ColumnibmtbFiltOrderInPriority | read-only | mandatory | The priority of when a filter is applied to an incoming frame. A value of 1 signifies that it is applied first. |
| 1.3.6.1.4.1.2.6.2.15.9.1.1.3 | ColumnibmtbFiltOrderInName | read-only | mandatory | The name of the filter applied to incoming frames that is associated with the priority, ibmtbFiltOrderInPriority. |
| 1.3.6.1.4.1.2.6.2.15.9.2 | TableibmtbFiltOrderOutTable | not-accessible | mandatory | Table of information describing which order the filters are applied for outgoing frames. |
| 1.3.6.1.4.1.2.6.2.15.9.2.1 | RowibmtbFiltOrderOutEntry | not-accessible | mandatory | Filter order information for outgoing frames. |
| 1.3.6.1.4.1.2.6.2.15.9.2.1.1 | ColumnibmtbFiltOrderOutIfIndex | read-only | mandatory | The value of this object identifies the interface for which this entry contains management information. The value of this object for a particular interface has… |
| 1.3.6.1.4.1.2.6.2.15.9.2.1.2 | ColumnibmtbFiltOrderOutPriority | read-only | mandatory | The priority of when a filter is applied to an outgoing frame. A value of 1 signifies that it is applied first. |
| 1.3.6.1.4.1.2.6.2.15.9.2.1.3 | ColumnibmtbFiltOrderOutName | read-only | mandatory | The name of the filter applied to outgoing frames that is associated with the priority, ibmtbFiltOrderOutPriority. |
| 1.3.6.1.4.1.2.6.2.16 | Nodeibmapple | |||
| 1.3.6.1.4.1.2.6.2.16.1 | NodeibmSelectNet | |||
| 1.3.6.1.4.1.2.6.2.16.1.1 | TableibmSelectNetTable | not-accessible | mandatory | The list of selected network definition entries. |
| 1.3.6.1.4.1.2.6.2.16.1.1.1 | RowibmSelectNetEntry | not-accessible | mandatory | The description of a selected network definition. |
| 1.3.6.1.4.1.2.6.2.16.1.1.1.1 | ColumnibmSelectNetIndex | read-only | mandatory | An identifier that is unique to the default zone name that is present in this entry. |
| 1.3.6.1.4.1.2.6.2.16.1.1.1.2 | ColumnibmSelectNetZone | read-only | mandatory | The ASCII default zone name of this entry. |
| 1.3.6.1.4.1.2.6.2.16.1.1.1.3 | ColumnibmSelectNetNetStart | read-only | mandatory | The network address that starts the range for this entry. This address is a two octet DDP network address in network byte order. |
| 1.3.6.1.4.1.2.6.2.16.1.1.1.4 | ColumnibmSelectNetNetEnd | read-only | mandatory | The network address that ends the range for this entry. This address is a two octet DDP network address in network byte order. |
| 1.3.6.1.4.1.2.6.2.16.1.1.1.5 | ColumnibmSelectNetInterfaceNetStart | read-only | mandatory | The network address that starts the range for the interface associated with this definition. |
| 1.3.6.1.4.1.2.6.2.16.2 | NodeibmnbpFilter | |||
| 1.3.6.1.4.1.2.6.2.16.2.1 | ScalaribmnbpFilterPacketsFiltered | read-only | mandatory | The number of packets filtered by nbp filters. |
| 1.3.6.1.4.1.2.6.2.16.2.2 | ScalaribmnbpFilterPacketsSent | read-only | mandatory | The number of packets not filtered by nbp filters. |
| 1.3.6.1.4.1.2.6.2.16.3 | NodeibmatportFilter | |||
| 1.3.6.1.4.1.2.6.2.16.3.1 | TableibmatportFilterTable | not-accessible | mandatory | The list of Appletalk port destination network filter entries. |
| 1.3.6.1.4.1.2.6.2.16.3.1.1 | RowibmatportFilterEntry | not-accessible | mandatory | The description of a filter on this Appletalk port. |
| 1.3.6.1.4.1.2.6.2.16.3.1.1.1 | ColumnibmatportFilterIndex | read-only | mandatory | An identifier that is unique to the Appletalk port to which this filter applies. The port identified by this value is the same port as identified by atportInde… |
| 1.3.6.1.4.1.2.6.2.16.3.1.1.2 | ColumnibmatportFilterNetStart | read-only | mandatory | The network address that starts the range for this destination network filter. This address is a two octet DDP network address in network byte order. |
| 1.3.6.1.4.1.2.6.2.16.3.1.1.3 | ColumnibmatportFilterNetEnd | read-only | mandatory | The network address that ends the range for this destination network filter. This address is a two octet DDP network address in network byte order. |
| 1.3.6.1.4.1.2.6.2.16.4 | NodeibmSelectNetFilter | |||
| 1.3.6.1.4.1.2.6.2.16.4.1 | TableibmSelectNetFilterTable | not-accessible | mandatory | The list of selected network destination network filter entries. |
| 1.3.6.1.4.1.2.6.2.16.4.1.1 | RowibmSelectNetFilterEntry | not-accessible | mandatory | The description of a filter for this selected network definition. |
| 1.3.6.1.4.1.2.6.2.16.4.1.1.1 | ColumnibmSelectNetFilterIndex | read-only | mandatory | An identifier that is unique to the selected network definition to which this filter applies. This value is the same as that provided by ibmSelectNetIndex. |
| 1.3.6.1.4.1.2.6.2.16.4.1.1.2 | ColumnibmSelectNetFilterNetStart | read-only | mandatory | The network address that starts the range for this destination network filter. This address is a two octet DDP network address in network byte order. |
| 1.3.6.1.4.1.2.6.2.16.4.1.1.3 | ColumnibmSelectNetFilterNetEnd | read-only | mandatory | The network address that ends the range for this destination network filter. This address is a two octet DDP network address in network byte order. |
| 1.3.6.1.4.1.2.6.2.17 | Nodeibmdec | |||
| 1.3.6.1.4.1.2.6.2.17.1 | ScalaribmdecAllRoutersFuncAddr | read-only | mandatory | The functional address used in communicating with with all DECnet Phase IV and DECnet Phase IV-Prime routers on a token ring LAN. |
| 1.3.6.1.4.1.2.6.2.17.2 | ScalaribmdecAllEndNodesFuncAddr | read-only | mandatory | The functional address used in communicating with with all DECnet Phase IV and DECnet Phase IV-Prime end nodes on a token ring LAN. |
| 1.3.6.1.4.1.2.6.2.17.3 | ScalaribmdecSplitHorPoisonRev | read-only | mandatory | Defines whether the Split Horizon with Poison Reverse option is enabled or not |
| 1.3.6.1.4.1.2.6.2.17.4 | ScalaribmdecNodeType | read-only | mandatory | This parameter indicates the node type of the router. This object is the same as the phivRouteType object defined by RFC 1289, however, this definition extends… |
| 1.3.6.1.4.1.2.6.2.17.5 | TableibmdecLANCircuitTable | not-accessible | mandatory | The list of information relevant to LAN circuits. This table extends the information provided by the phivCircuitParametersTable defined by RFC 1289. |
| 1.3.6.1.4.1.2.6.2.17.5.1 | RowibmdecLANCircuitEntry | not-accessible | mandatory | Table entry with information relevant to LAN circuits. |
| 1.3.6.1.4.1.2.6.2.17.5.1.1 | ColumnibmdecLANCircuitIndex | read-only | mandatory | A unique index value for each known circuit on a LAN interface. The value of this variable is the same as that provided by phivCircuitIndex. |
| 1.3.6.1.4.1.2.6.2.17.5.1.2 | ColumnibmdecLANCircuitType | read-only | mandatory | If the CircuitType is Bilingual for a circuit, the router would use a Phase_IV compliant locally administered MAC address for that circuit and would be configu… |
| 1.3.6.1.4.1.2.6.2.17.5.1.3 | ColumnibmdecLANCircuitSourceRoute | read-only | mandatory | This parameter indicates if source routing is enabled on a token-ring circuit. A value of 3 is returned for circuits which are not of the 802.5/token-ring type. |
| 1.3.6.1.4.1.2.6.2.17.5.1.4 | ColumnibmdecLANCircuitAddrType | read-only | mandatory | This parameter indicates the type of MAC address used on this circuit. The value returned is decnet(1), if a DECnet Phase_IV compliant locally administered MAC… |
| 1.3.6.1.4.1.2.6.2.18 | Nodeibmvines | |||
| 1.3.6.1.4.1.2.6.2.18.1 | NodeibmvSysConfig | |||
| 1.3.6.1.4.1.2.6.2.18.1.1 | ScalaribmvSysRtr | read-only | mandatory | Indicates whether this node is acting as a VINES router. |
| 1.3.6.1.4.1.2.6.2.18.1.2 | ScalaribmvRouterName | read-only | mandatory | The name of the router node, up to 15 characters long. |
| 1.3.6.1.4.1.2.6.2.18.1.3 | ScalaribmvRouterNetid | read-only | mandatory | The VINES network ID of the router node equal to the router node's serial number. This id may be up to 4 bytes in length. |
| 1.3.6.1.4.1.2.6.2.18.2 | NodeibmvIP | |||
| 1.3.6.1.4.1.2.6.2.18.2.1 | ScalaribmvipTotalIn | read-only | mandatory | The total number of VINES IP packets that the router node has received since the last reboot. |
| 1.3.6.1.4.1.2.6.2.18.2.2 | ScalaribmvipTotalOut | read-only | mandatory | The total number of VINES IP packets that the router node has sent since the last reboot. |
| 1.3.6.1.4.1.2.6.2.18.2.3 | ScalaribmvipRouted | read-only | mandatory | The total number of packets that were routed to another node since the last reboot. |
| 1.3.6.1.4.1.2.6.2.18.2.4 | ScalaribmvipBcast | read-only | mandatory | The number of VINES IP broadcast packets sent, both generated from the router node and routed from other nodes, since the last reboot. |
| 1.3.6.1.4.1.2.6.2.18.2.5 | ScalaribmvipInReceives | read-only | mandatory | The number of unicast VINES IP packets received since the last reboot. A unicast packet is destined for this particular router node. It is not being forwarded,… |
| 1.3.6.1.4.1.2.6.2.18.2.6 | ScalaribmvipBcastInReceives | read-only | mandatory | The number of VINES IP broadcast packets received since the last reboot. |
| 1.3.6.1.4.1.2.6.2.18.2.7 | ScalaribmvipBad | read-only | mandatory | The total number of badly formed packets that the router node has received since the last booted. |
| 1.3.6.1.4.1.2.6.2.18.2.8 | ScalaribmvipBadHeaders | read-only | mandatory | The number of incoming VINES IP packets received since the last reboot which contained a header error; excluding the following errors: length, checksum and tim… |
| 1.3.6.1.4.1.2.6.2.18.2.9 | ScalaribmvipTooSmalls | read-only | mandatory | The number of VINES IP packets received since the last reboot with len < the size of a VINES IP header. |
| 1.3.6.1.4.1.2.6.2.18.2.10 | ScalaribmvipBadLens | read-only | mandatory | The number of VINES IP packets received since the last reboot whose packet size is not equal to the number of bytes specified in the VINES IP header field. |
| 1.3.6.1.4.1.2.6.2.18.2.11 | ScalaribmvipBadSums | read-only | mandatory | The number of VINES IP packets received since the last reboot with a bad checksum. |
| 1.3.6.1.4.1.2.6.2.18.2.12 | ScalaribmvipInDiscards | read-only | mandatory | The number of incoming VINES IP packets discarded since the last reboot due to lack of resources. |
| 1.3.6.1.4.1.2.6.2.18.2.13 | ScalaribmvipZeroHops | read-only | mandatory | The number of VINES IP packets discarded since the last reboot because the hop count equals zero and the current node is not the destination. |
| 1.3.6.1.4.1.2.6.2.18.2.14 | ScalaribmvipOutNoRoutes | read-only | mandatory | The number of outgoing VINES IP packets discarded since the last reboot because no route is available. |
| 1.3.6.1.4.1.2.6.2.18.3 | NodeibmvNeighbor | |||
| 1.3.6.1.4.1.2.6.2.18.3.1 | NodeibmvARP | |||
| 1.3.6.1.4.1.2.6.2.18.3.1.1 | ScalaribmvarpQueryReqs | read-only | mandatory | The number of query requests received from clients since the last reboot. When a client is first booted up, it sends out a broadcast query request packet on it… |
| 1.3.6.1.4.1.2.6.2.18.3.1.2 | ScalaribmvarpServiceResps | read-only | mandatory | The number of ARP query responses sent out from this router node since the last reboot. Each router node on the same LAN segment that is providing address assi… |
| 1.3.6.1.4.1.2.6.2.18.3.1.3 | ScalaribmvarpAssignReqs | read-only | mandatory | The number of ARP assignment request received from clients since the last reboot. The client issues an assignment request packet to the router node that respon… |
| 1.3.6.1.4.1.2.6.2.18.3.1.4 | ScalaribmvarpAssignResps | read-only | mandatory | The number of ARP assignment responses sent to clients since the last reboot. The router node issues a VINES internet address for the client and sends it back … |
| 1.3.6.1.4.1.2.6.2.18.3.1.5 | ScalaribmvarpHeaderError | read-only | mandatory | The number of ARP packets received since the last reboot with a header error. |
| 1.3.6.1.4.1.2.6.2.18.3.2 | ScalaribmvNbrNumber | read-only | mandatory | The number of entries in the neighbor table. |
| 1.3.6.1.4.1.2.6.2.18.3.3 | TableibmvNbrTable | not-accessible | mandatory | A list of information about IBM's VINES router neighbor table. |
| 1.3.6.1.4.1.2.6.2.18.3.3.1 | RowibmvNbrEntry | not-accessible | mandatory | The information for each entry in the neighbor table. |
| 1.3.6.1.4.1.2.6.2.18.3.3.1.1 | ColumnibmvNbrNetid | read-only | mandatory | The network ID of the neighbor. The VINES internet address has the following form: 'nnnnnnnn.ssss'hex, where n = network ID and s = subnetwork ID. If the neigh… |
| 1.3.6.1.4.1.2.6.2.18.3.3.1.2 | ColumnibmvNbrSubNetid | read-only | mandatory | The subnetwork ID of the neighbor. The VINES internet address has the following form: 'nnnnnnnn.ssss'hex, where n = network ID and s = subnetwork ID. If the ne… |
| 1.3.6.1.4.1.2.6.2.18.3.3.1.3 | ColumnibmvNbrType | read-only | mandatory | The type of the neighbor (workstation = pc). |
| 1.3.6.1.4.1.2.6.2.18.3.3.1.4 | ColumnibmvNbrIfType | read-only | mandatory | The type of interface that the server uses to reach the neighbor. |
| 1.3.6.1.4.1.2.6.2.18.3.3.1.5 | ColumnibmvNbrRemAddress | read-only | mandatory | The address of the neighbor's physical interface. For LAN's, it is the hardware address of the neighbor. |
| 1.3.6.1.4.1.2.6.2.18.3.3.1.6 | ColumnibmvNbrLocAddress | read-only | mandatory | The address of the router node's physical interface, such as a LAN address. |
| 1.3.6.1.4.1.2.6.2.18.3.3.1.7 | ColumnibmvNbrLocSlot | read-only | mandatory | The slot number of the interface card that the router node uses to reach the neighbor. |
| 1.3.6.1.4.1.2.6.2.18.3.3.1.8 | ColumnibmvNbrLocPort | read-only | mandatory | The port number on the interface card that the router node used to reach the neighbor. |
| 1.3.6.1.4.1.2.6.2.18.3.3.1.9 | ColumnibmvNbrAging | read-only | mandatory | The amount of time left before a neighbor entry will be removed because of aging. For a WAN link, which is defined to be permanent, this object is not applicab… |
| 1.3.6.1.4.1.2.6.2.18.3.3.1.10 | ColumnibmvNbrFlags | read-only | mandatory | Only applicable to a WAN link; states if the link is permanent or non-permanent. |
| 1.3.6.1.4.1.2.6.2.18.3.3.1.11 | ColumnibmvNbrRIF | read-only | mandatory | LAN - MAC address and if applicable, source routing information. Frame Relay - n/a PPP - n/a |
| 1.3.6.1.4.1.2.6.2.18.3.3.1.12 | ColumnibmvNbrIfIndex | read-only | mandatory | The interface (using the MIB II standard) used to reach the neighbor. This number corresponds to the IfIndex object found in MIB II. |
| 1.3.6.1.4.1.2.6.2.18.3.3.1.13 | ColumnibmvNbrMetric | read-only | mandatory | The cost to reach the neighbor. |
| 1.3.6.1.4.1.2.6.2.18.4 | NodeibmvRouting | |||
| 1.3.6.1.4.1.2.6.2.18.4.1 | NodeibmvRtConfig | |||
| 1.3.6.1.4.1.2.6.2.18.4.1.1 | ScalaribmvRtCfgMax | read-only | mandatory | The maximum number of entries allowed in the routing table. This value is not defined by administrator. |
| 1.3.6.1.4.1.2.6.2.18.4.1.2 | ScalaribmvRtCfgInFlt | read-only | mandatory | Enables or disables all inbound RTP filters defined. If no inbound RTP filters are defined, then this object has no effect. If a filter is defined, then the de… |
| 1.3.6.1.4.1.2.6.2.18.4.1.3 | ScalaribmvRtCfgInFltNum | read-only | mandatory | The number of inbound RTP filters currently defined. |
| 1.3.6.1.4.1.2.6.2.18.4.1.4 | TableibmvRtCfgInFltTable | not-accessible | mandatory | A list of information about the inbound RTP filters which are specified for this router node. |
| 1.3.6.1.4.1.2.6.2.18.4.1.4.1 | RowibmvRtCfgInFltEntry | not-accessible | mandatory | The information for each entry in the inbound RTP filter table. |
| 1.3.6.1.4.1.2.6.2.18.4.1.4.1.1 | ColumnibmvRtCfgInFltNetID | read-only | mandatory | Administrator defined object which specifies the VINES network number to be filtered on the port. The range of the network number is 00000000 - FFFFFFFE. If th… |
| 1.3.6.1.4.1.2.6.2.18.4.1.4.1.2 | ColumnibmvRtCfgInFltIfIndex | read-only | mandatory | The interface (using the MIB II standard) for which the inbound RTP filters were defined. This number corresponds to the IfIndex object found in MIB II. |
| 1.3.6.1.4.1.2.6.2.18.4.1.4.1.3 | ColumnibmvRtCfgInFltMode | read-only | mandatory | The filtering action for the inbound RTP filter. The inbound RTP filters operate on network numbers contained in the topological entries in the RTP update, res… |
| 1.3.6.1.4.1.2.6.2.18.4.1.4.1.4 | ColumnibmvRtCfgInFltUses | read-only | mandatory | The number of times the defined filter was used. |
| 1.3.6.1.4.1.2.6.2.18.4.1.5 | ScalaribmvRtCfgOutFlt | read-only | mandatory | Enables or disables all outbound RTP filters defined. If no outbound RTP filters are defined, then this object has no effect. If a filter is defined, then the … |
| 1.3.6.1.4.1.2.6.2.18.4.1.6 | ScalaribmvRtCfgOutFltNum | read-only | mandatory | The number of outbound RTP filters currently defined. |
| 1.3.6.1.4.1.2.6.2.18.4.1.7 | TableibmvRtCfgOutFltTable | not-accessible | mandatory | A list of information about the outbound RTP filters which are specified for this router node. |
| 1.3.6.1.4.1.2.6.2.18.4.1.7.1 | RowibmvRtCfgOutFltEntry | not-accessible | mandatory | The information for each entry in the outbound RTP filter table. |
| 1.3.6.1.4.1.2.6.2.18.4.1.7.1.1 | ColumnibmvRtCfgOutFltNetID | read-only | mandatory | Administrator defined object which specifies the VINES network number to be filtered on the port. The range of the network number is 00000000 - FFFFFFFE. If th… |
| 1.3.6.1.4.1.2.6.2.18.4.1.7.1.2 | ColumnibmvRtCfgOutFltIfIndex | read-only | mandatory | The interface (using the MIB II standard) for which the outbound RTP filters were defined. This number corresponds to the IfIndex object found in MIB II. |
| 1.3.6.1.4.1.2.6.2.18.4.1.7.1.3 | ColumnibmvRtCfgOutFltMode | read-only | mandatory | The filtering action for the outbound RTP filter. The outbound RTP filters operate on the network numbers contained in the topological entries in RTP update an… |
| 1.3.6.1.4.1.2.6.2.18.4.1.7.1.4 | ColumnibmvRtCfgOutFltUses | read-only | mandatory | The number of times the defined filter was used. |
| 1.3.6.1.4.1.2.6.2.18.4.1.8 | ScalaribmvRtCfgFlt | read-only | mandatory | Enables or disables all RTP router filters defined. If no RTP router filters are defined, then this object has no effect. If a filter is defined, then the defa… |
| 1.3.6.1.4.1.2.6.2.18.4.1.9 | ScalaribmvRtCfgFltNum | read-only | mandatory | The number of RTP router filters currently defined. |
| 1.3.6.1.4.1.2.6.2.18.4.1.10 | TableibmvRtCfgFltTable | not-accessible | mandatory | A list of information about the RTP router filters which are specified for this router node. |
| 1.3.6.1.4.1.2.6.2.18.4.1.10.1 | RowibmvRtCfgFltEntry | not-accessible | mandatory | The information for each entry in the RTP router filter table. |
| 1.3.6.1.4.1.2.6.2.18.4.1.10.1.1 | ColumnibmvRtCfgFltNetID | read-only | mandatory | Administrator defined object which specifies the VINES network number to be filtered on the port. The range of the network number is 00000000 - FFFFFFFE. If th… |
| 1.3.6.1.4.1.2.6.2.18.4.1.10.1.2 | ColumnibmvRtCfgFltMode | read-only | mandatory | The filtering action for the RTP router filter. The RTP router filters operate on the network number contained in the source network number field in the IP hea… |
| 1.3.6.1.4.1.2.6.2.18.4.1.10.1.3 | ColumnibmvRtCfgFltUses | read-only | mandatory | The number of times the defined filter was used. |
| 1.3.6.1.4.1.2.6.2.18.4.2 | NodeibmvRTP | |||
| 1.3.6.1.4.1.2.6.2.18.4.2.1 | ScalaribmvrtpUpdSents | read-only | mandatory | The number of routing update packets sent since the last reboot. The routing update packets are periodically broadcast by nodes to notify neighboring nodes of … |
| 1.3.6.1.4.1.2.6.2.18.4.2.2 | ScalaribmvrtpUpdRecs | read-only | mandatory | The number of routing update packets received since the last reboot. The routing update packets are sent from neighboring node making known their existence. Pa… |
| 1.3.6.1.4.1.2.6.2.18.4.2.3 | ScalaribmvrtpReqSents | read-only | mandatory | The number of routing request packets sent since the last reboot. Routing request packets are sent by a node when it requires an immediate update. |
| 1.3.6.1.4.1.2.6.2.18.4.2.4 | ScalaribmvrtpReqRecs | read-only | mandatory | The number of routing request packets received since the last reboot. The 6611 receives routing request packets when another node requires an immediate update.… |
| 1.3.6.1.4.1.2.6.2.18.4.2.5 | ScalaribmvrtpResSents | read-only | mandatory | The number of routing response packets sent since the last reboot. Routing response packets are sent in response to a routing request packet. |
| 1.3.6.1.4.1.2.6.2.18.4.2.6 | ScalaribmvrtpResRecs | read-only | mandatory | The number of routing response packets received since the last reboot. When a node sends out a routing request packet, it receives a routing response packet wh… |
| 1.3.6.1.4.1.2.6.2.18.4.2.7 | ScalaribmvrtpRedSents | read-only | mandatory | The number of routing redirect packets sent since the last reboot. The routing redirect packets are sent by a node to notify another node of a more direct path… |
| 1.3.6.1.4.1.2.6.2.18.4.2.8 | ScalaribmvrtpRedRecs | read-only | mandatory | The number of routing redirect packets received since the last reboot. A 6611 receives a routing redirect packet when another node knows a more direct path to … |
| 1.3.6.1.4.1.2.6.2.18.4.2.9 | ScalaribmvrtpHeaderError | read-only | mandatory | The number of RTP packets received since the last reboot with a RTP header error. |
| 1.3.6.1.4.1.2.6.2.18.4.3 | ScalaribmvRtNumber | read-only | mandatory | The number of entires in the route table. |
| 1.3.6.1.4.1.2.6.2.18.4.4 | TableibmvRtTable | not-accessible | mandatory | A list of information about IBM's VINES router table. |
| 1.3.6.1.4.1.2.6.2.18.4.4.1 | RowibmvRtEntry | not-accessible | mandatory | The information for each entry in the router table. |
| 1.3.6.1.4.1.2.6.2.18.4.4.1.1 | ColumnibmvRtNetid | read-only | mandatory | The network ID of the router node's destination router node. |
| 1.3.6.1.4.1.2.6.2.18.4.4.1.2 | ColumnibmvRtMetric | read-only | mandatory | The routing metric used by the called router node to reach the destination. A routing metric is an estimated round-trip delay time associated with the router t… |
| 1.3.6.1.4.1.2.6.2.18.4.4.1.3 | ColumnibmvRtIdle | read-only | mandatory | The time to live timer for this router node's entry. This value indicates the amount of time before the entry is removed from the called router node's routing … |
| 1.3.6.1.4.1.2.6.2.18.4.4.1.4 | ColumnibmvRtGateNetid | read-only | mandatory | The network ID of the router node that acts as the router for reaching the destination router node. |
| 1.3.6.1.4.1.2.6.2.18.4.4.1.5 | ColumnibmvRtIfIndex | read-only | mandatory | The interface (using the MIB II standard) which identifies the local interface through which the next hop of this route should be reached. This number correspo… |
| 1.3.6.1.4.1.2.6.2.18.4.4.1.6 | ColumnibmvRtState | read-only | mandatory | The state the routing entry; permanent or not permanent. |
| 1.3.6.1.4.1.2.6.2.18.5 | NodeibmvICP | |||
| 1.3.6.1.4.1.2.6.2.18.5.1 | ScalaribmvicpExcGens | read-only | mandatory | Number of exception notifications generated from this router node since the last reboot. |
| 1.3.6.1.4.1.2.6.2.18.5.2 | ScalaribmvicpMetricGens | read-only | mandatory | The number of metric notifications generated from this router node since the last reboot. The ICP packet contains metric information about the final transmissi… |
| 1.3.6.1.4.1.2.6.2.18.5.3 | ScalaribmvicpHeaderError | read-only | mandatory | The number of ICP packets received since the last reboot with an ICP header error. |
| 1.3.6.1.4.1.2.6.2.18.6 | NodeibmvFRP | |||
| 1.3.6.1.4.1.2.6.2.18.6.1 | ScalaribmvFRPreassembles | read-only | mandatory | The number of times packets were reassembled since the last reboot. One VINES IP packet being broken into three message fragments is counted as one fragmentati… |
| 1.3.6.1.4.1.2.6.2.18.6.2 | ScalaribmvFRPfragsReassembled | read-only | mandatory | The number of fragments that were reassembled since the last reboot. If three fragments are to be reassembled into one packet, then this object value will add … |
| 1.3.6.1.4.1.2.6.2.18.6.3 | ScalaribmvFRPreasFails | read-only | mandatory | The number of times the reassembly of fragments fails since the last reboot. |
| 1.3.6.1.4.1.2.6.2.18.6.4 | ScalaribmvFRPfragmented | read-only | mandatory | The number of packet fragmentations performed since the last reboot. |
| 1.3.6.1.4.1.2.6.2.18.6.5 | ScalaribmvFRPfrgCreated | read-only | mandatory | The number of fragments created since the last reboot when fragmenting VINES IP packets. If a VINES IP packet is fragmented into three fragments, then this obj… |
| 1.3.6.1.4.1.2.6.2.18.6.6 | ScalaribmvFRPfrgFails | read-only | mandatory | The number of times the fragmentation of a VINES IP packets fails since the last reboot. |
| 1.3.6.1.4.1.2.6.2.18.7 | NodeibmvInterface | |||
| 1.3.6.1.4.1.2.6.2.18.7.1 | TableibmvPortCfgTable | not-accessible | mandatory | The list of information about port configuration at each interface. |
| 1.3.6.1.4.1.2.6.2.18.7.1.1 | RowibmvPortCfgEntry | not-accessible | mandatory | The information for each entry in the port configuration table. |
| 1.3.6.1.4.1.2.6.2.18.7.1.1.1 | ColumnibmvPortCfgIfIndex | read-only | mandatory | The interface (using the MIB II standard) which uniquely identifies each interface and allows multiple tables to be associated with a given interface. This num… |
| 1.3.6.1.4.1.2.6.2.18.7.1.1.2 | ColumnibmvPortCfgARP | read-only | mandatory | Administrator defined value which specifies whether the router node will assign VINES addresses to clients that reside on the LAN attached to this port. The de… |
| 1.3.6.1.4.1.2.6.2.18.7.1.1.3 | ColumnibmvPortCfgServ | read-only | mandatory | Administrator defined value specifying whether the serverless option is enables or disabled. When the serverless option is enabled; the router looks for partic… |
| 1.3.6.1.4.1.2.6.2.18.7.1.1.4 | ColumnibmvPortCfgHCtoServ | read-only | mandatory | Administrator defined value which specifies the number of hops from the client to the router node. |
| 1.3.6.1.4.1.2.6.2.18.7.1.1.5 | ColumnibmvPortCfgPerUpdate | read-only | mandatory | Administrator defined value which specifies whether periodic updates will be sent over a WAN link. |
| 1.3.6.1.4.1.2.6.2.18.7.1.1.6 | ColumnibmvPortCfgMetric | read-only | mandatory | Administrator defined value for port metric. This value overrides the metric which is used by the IBM 6611 to make routing decisions. If no response is provide… |
| 1.3.6.1.4.1.2.6.2.18.7.1.1.7 | ColumnibmvPortCfgTR | read-only | mandatory | Administrator defined value which determines the encapsulation method used for receiving and transmitting VINES packets on this port. IEEE 802.5 LLC uses 802.2… |
| 1.3.6.1.4.1.2.6.2.18.7.1.1.8 | ColumnibmvPortCfgEN | read-only | mandatory | Administrator defined value which determines the encapsulation method used for receiving and transmitting VINES packets on this port. Ethernet II uses DIX enca… |
| 1.3.6.1.4.1.2.6.2.18.7.1.1.9 | ColumnibmvPortCfgInFlt | read-only | mandatory | Administrator defined value which allows inbound port filters to be defined. The default value is 'disabled'. |
| 1.3.6.1.4.1.2.6.2.18.7.1.1.10 | ColumnibmvPortCfgInFltNum | read-only | mandatory | The number of inbound port filters defined for this port. |
| 1.3.6.1.4.1.2.6.2.18.7.1.1.11 | ColumnibmvPortCfgOutFlt | read-only | mandatory | Administrator defined value which allows outbound port filters to be defined. The default value is 'disabled'. |
| 1.3.6.1.4.1.2.6.2.18.7.1.1.12 | ColumnibmvPortCfgOutFltNum | read-only | mandatory | The number of outbound port filters defined for this port. |
| 1.3.6.1.4.1.2.6.2.18.7.2 | TableibmvFltTable | not-accessible | mandatory | The list of information about port filter configurations at each interface . |
| 1.3.6.1.4.1.2.6.2.18.7.2.1 | RowibmvFltEntry | not-accessible | mandatory | The information for each entry in the port filter configuration table. |
| 1.3.6.1.4.1.2.6.2.18.7.2.1.1 | ColumnibmvFltIfIndex | read-only | mandatory | The value of this object identifies the interface for which this entry contains management information. The IfIndex allows a subset of the filter table to be a… |
| 1.3.6.1.4.1.2.6.2.18.7.2.1.2 | ColumnibmvFltNo | read-only | mandatory | A unique integer identifying this filter entry for this interface. |
| 1.3.6.1.4.1.2.6.2.18.7.2.1.3 | ColumnibmvFltMode | read-only | mandatory | Identifies if the port filter is an inbound or outbound filter. |
| 1.3.6.1.4.1.2.6.2.18.7.2.1.4 | ColumnibmvFltValue | read-only | mandatory | An octet string representing the concatenation of VINES IP header fields and VINES transport header fields required by this filter entry. Incoming packets will… |
| 1.3.6.1.4.1.2.6.2.18.7.2.1.5 | ColumnibmvFltMask | read-only | mandatory | An octet string indicating the parts of the VIP header and transport header relevant to this filter entry. This mask will be bitwise ANDed with the appropriate… |
| 1.3.6.1.4.1.2.6.2.18.7.2.1.6 | ColumnibmvFltType | read-only | mandatory | Administrator defined value which determines the filtering mode for all filters defined on this port. If the port is using Deny mode, then all packets matching… |
| 1.3.6.1.4.1.2.6.2.18.7.2.1.7 | ColumnibmvFltHCCompare | read-only | mandatory | Administrator defined value which indicates the relational association desired if filtering is being done based on hop count. If filtering is not being done ba… |
| 1.3.6.1.4.1.2.6.2.18.7.2.1.8 | ColumnibmvFltUses | read-only | mandatory | This object counts how many times the defined filter was used. |
| 1.3.6.1.4.1.2.6.2.18.7.3 | ScalaribmvifNumber | read-only | mandatory | The number of VINES interfaces configured on the router node. |
| 1.3.6.1.4.1.2.6.2.18.7.4 | TableibmvifTable | not-accessible | mandatory | List of interfaces with some statistics about each interface. |
| 1.3.6.1.4.1.2.6.2.18.7.4.1 | RowibmvifEntry | not-accessible | mandatory | Information about one interface. |
| 1.3.6.1.4.1.2.6.2.18.7.4.1.1 | ColumnibmvifSlot | read-only | mandatory | The slot number of the interface's communications card. |
| 1.3.6.1.4.1.2.6.2.18.7.4.1.2 | ColumnibmvifPort | read-only | mandatory | The port number of the interface. |
| 1.3.6.1.4.1.2.6.2.18.7.4.1.3 | ColumnibmvifDescr | read-only | mandatory | A textual description of the interface. |
| 1.3.6.1.4.1.2.6.2.18.7.4.1.4 | ColumnibmvifAddress | read-only | mandatory | The physical address of the interface, applies to LAN interfaces only. |
| 1.3.6.1.4.1.2.6.2.18.7.4.1.5 | ColumnibmvifInPkts | read-only | mandatory | The total number of VINES IP packets that the router node received since the last reboot. |
| 1.3.6.1.4.1.2.6.2.18.7.4.1.6 | ColumnibmvifInErrs | read-only | mandatory | The total number of received VINES IP packets that contained errors since the last reboot. |
| 1.3.6.1.4.1.2.6.2.18.7.4.1.7 | ColumnibmvifOutPkts | read-only | mandatory | The total number of VINES IP packets that the router node sent since the last reboot. |
| 1.3.6.1.4.1.2.6.2.18.7.4.1.8 | ColumnibmvifOutErrs | read-only | mandatory | The total number of transmitted VINES IP packets that contained errors since the last reboot. |
| 1.3.6.1.4.1.2.6.2.19 | Nodeibminterfaces | |||
| 1.3.6.1.4.1.2.6.2.19.1 | Nodeibmipext | |||
| 1.3.6.1.4.1.2.6.2.19.1.1 | TableibmipPtyQueueEnableTable | not-accessible | mandatory | This table defines which interfaces are enabled for IP prioritization. It also defines the default serial transmission priority queue to be used for IP packets… |
| 1.3.6.1.4.1.2.6.2.19.1.1.1 | RowibmipPtyQueueEnableEntry | not-accessible | mandatory | Each entry defines whether IP prioritization is enabled on a particular interface and the default transmission queue. |
| 1.3.6.1.4.1.2.6.2.19.1.1.1.1 | ColumnibmipPtyQueueEnableIfIndex | read-only | mandatory | Defines the interface associated with IP prioritization. This interface is the same interface as defined by the ifIndex variable of the MIB-II interfaces group. |
| 1.3.6.1.4.1.2.6.2.19.1.1.1.2 | ColumnibmipPtyQueueEnable | read-only | mandatory | The value of this object identifies if IP prioritization is enabled on this interface. |
| 1.3.6.1.4.1.2.6.2.19.1.1.1.3 | ColumnibmipPtyQueueDefault | read-only | mandatory | Identifies the transmission queue to be used for IP packets which are not assigned to use a specific transmission queue. |
| 1.3.6.1.4.1.2.6.2.19.1.2 | TableibmipPtyQueueTable | not-accessible | mandatory | This table contains the assignments of UDP/TCP port numbers to specific transmission queues for a given serial interface. |
| 1.3.6.1.4.1.2.6.2.19.1.2.1 | RowibmipPtyQueueEntry | not-accessible | mandatory | Each entry defines the UDP/TCP port number and its associated transmission priority queue for a given interface. |
| 1.3.6.1.4.1.2.6.2.19.1.2.1.1 | ColumnibmipPtyQueueIfIndex | read-only | mandatory | Defines the interface on which a UDP/TCP port is associated with a specific transmission priority queue. This interface is the same interface as defined by the… |
| 1.3.6.1.4.1.2.6.2.19.1.2.1.2 | ColumnibmipPtyQueuePort | read-only | mandatory | Identifies a UDP or TCP port number. |
| 1.3.6.1.4.1.2.6.2.19.1.2.1.3 | ColumnibmipPtyQueueType | read-only | mandatory | Indicates the port type of the port number defined by ibmipPtyQueuePort. |
| 1.3.6.1.4.1.2.6.2.19.1.2.1.4 | ColumnibmipPtyQueueNumber | read-only | mandatory | Indicates which transmission queue will be used to transmit a packet which has a port number as specified by ibmipPtyQueuePort. |
| 1.3.6.1.4.1.2.6.2.19.1.3 | TableibmipFilterTable | not-accessible | mandatory | Table of IP address/mask filter definitions. |
| 1.3.6.1.4.1.2.6.2.19.1.3.1 | RowibmipFilterEntry | not-accessible | mandatory | An entry in the IP address/mask filter table. |
| 1.3.6.1.4.1.2.6.2.19.1.3.1.1 | ColumnibmipFilterIfIndex | read-only | mandatory | Defines the interface associated with this address/mask filter definition. This interface is the same interface as defined by the ifIndex variable of the MIB-I… |
| 1.3.6.1.4.1.2.6.2.19.1.3.1.2 | ColumnibmipFilterId | read-only | mandatory | An id that defines this filter entry. This number is unique within this interface. |
| 1.3.6.1.4.1.2.6.2.19.1.3.1.3 | ColumnibmipFilterScope | read-only | mandatory | Defines whether this filter is applied to all interfaces or just this one. |
| 1.3.6.1.4.1.2.6.2.19.1.3.1.4 | ColumnibmipFilterType | read-only | mandatory | Defines the type of filtering. |
| 1.3.6.1.4.1.2.6.2.19.1.3.1.5 | ColumnibmipPermitDeny | read-only | mandatory | Identifies whether traffic for a specified filter ID is to be permitted to pass through the IBM 6611 or whether it is to be discarded. |
| 1.3.6.1.4.1.2.6.2.19.1.3.1.6 | ColumnibmipFilterAddr1 | read-only | mandatory | A valid IP address of the host, subnet or network for this filter. For singular filters, this is the only end point, however, for dual filters this is the sour… |
| 1.3.6.1.4.1.2.6.2.19.1.3.1.7 | ColumnibmipFilterMask1 | read-only | mandatory | A valid IP address mask used for this filter. In conjunction with the IP address defined by ibmipFilterAddr1, it defines the range of IP addresses to be filter… |
| 1.3.6.1.4.1.2.6.2.19.1.3.1.8 | ColumnibmipFilterAddr2 | read-only | mandatory | Defines the destination IP address if ibmipFilterType is dual. This value is undefined for singular filters. |
| 1.3.6.1.4.1.2.6.2.19.1.3.1.9 | ColumnibmipFilterMask2 | read-only | mandatory | A valid IP address mask used for this filter. In conjunction with the IP address defined by ibmipFilterAddr2, it defines the range of IP addresses to be filter… |
| 1.3.6.1.4.1.2.6.2.19.1.4 | TableibmipFilterExtTable | not-accessible | mandatory | Table of IP port number filter definitions. |
| 1.3.6.1.4.1.2.6.2.19.1.4.1 | RowibmipFilterExtEntry | not-accessible | mandatory | An entry in the IP port number filter table. |
| 1.3.6.1.4.1.2.6.2.19.1.4.1.1 | ColumnibmipFilterExtIfIndex | read-only | mandatory | Defines the interface associated with this IP port number filter definition. This interface is the same interface as defined by the ifIndex variable of the MIB… |
| 1.3.6.1.4.1.2.6.2.19.1.4.1.2 | ColumnibmipFilterExtFilterId | read-only | mandatory | An id that defines this filter entry. This number is unique within this interface and is the same filter ID as defined by ibmipFilterId. |
| 1.3.6.1.4.1.2.6.2.19.1.4.1.3 | ColumnibmipFilterExtValue | read-only | mandatory | Defines a TCP or UDP port number that will be filtered using this filter specification. |
| 1.3.6.1.4.1.2.6.2.19.1.4.1.4 | ColumnibmipFilterExtProtocol | read-only | mandatory | Specifies the protocol associated with the value defined by ibmipFilterExtValue for this filter specification. |
| 1.3.6.1.4.1.2.6.2.19.2 | Nodeibmptyqueue | |||
| 1.3.6.1.4.1.2.6.2.19.2.1 | TableibmPtyQueueingTable | not-accessible | mandatory | This table provides information on a specific transmission queue of a serial interface. Information includes: - Link Bandwidth Allocation (LBA): Identifies the… |
| 1.3.6.1.4.1.2.6.2.19.2.1.1 | RowibmPtyQueueingEntry | not-accessible | mandatory | Each entry defines the Link Bandwidth Allocation (LBA) and Queue Bandwidth Reservation (QBR) definitions for a specific transmission queue on a serial interfac… |
| 1.3.6.1.4.1.2.6.2.19.2.1.1.1 | ColumnibmPtyQueueingIfIndex | read-only | mandatory | Defines the interface associated with this priority queue information. This interface is the same interface as defined by the ifIndex variable of the MIB-II in… |
| 1.3.6.1.4.1.2.6.2.19.2.1.1.2 | ColumnibmPtyQueueingQnum | read-only | mandatory | Identifies the priority queue associated with this interface and its priority queue information. |
| 1.3.6.1.4.1.2.6.2.19.2.1.1.3 | ColumnibmPtyQueueingLBA | read-only | mandatory | Link Bandwidth Allocation (LBA): Identifies the number of packets that will be transmitted from this queue before a lower priority queue will be serviced. |
| 1.3.6.1.4.1.2.6.2.19.2.1.1.4 | ColumnibmPtyQueueingQBR | read-only | mandatory | Queue Bandwidth Reservation (QBR): Identifies the percentage of buffer space on a serial adapter that is allotted to a particular queue for transmission of pac… |
| 1.3.6.1.4.1.2.6.2.19.2.1.1.5 | ColumnibmPtyQueueingDiscards | read-only | mandatory | Identifies the number of packets discarded from this queue due to a queue overflow. |
| 1.3.6.1.4.1.2.6.2.19.3 | NodeibmTG | |||
| 1.3.6.1.4.1.2.6.2.19.3.1 | TableibmTGTable | not-accessible | mandatory | This table provides information about serial point-to-point links which are participating in the 2 T1 in a transmission group (TG) function. |
| 1.3.6.1.4.1.2.6.2.19.3.1.1 | RowibmTGEntry | not-accessible | mandatory | Each entry identifies an interface participating in the 2 T1 in a TG function, along with its associated TG name and which protocol is using the function. |
| 1.3.6.1.4.1.2.6.2.19.3.1.1.1 | ColumnibmTGProtocol | read-only | mandatory | Defines the protocol that is supported for this particular interface and TG name. Currently, only the IP protocol is supported |
| 1.3.6.1.4.1.2.6.2.19.3.1.1.2 | ColumnibmTGIfIndex | read-only | mandatory | Defines the interface associated with this particular TG name and protocol. This interface is the same interface as defined by the ifIndex variable of the MIB-… |
| 1.3.6.1.4.1.2.6.2.19.3.1.1.3 | ColumnibmTGEnable | read-only | mandatory | Defines whether the 2 T1 in a TG function is enabled on this interface |
| 1.3.6.1.4.1.2.6.2.19.3.1.1.4 | ColumnibmTGGroupName | read-only | mandatory | Defines the common TG name assigned to all interfaces in this group. All interfaces with the same TG name will belong to the same group. |
| 1.3.6.1.4.1.2.6.2.19.3.1.1.5 | ColumnibmTGSwitchOuts | read-only | mandatory | Counts the number of times a packet had to be switched to another interface in the transmission group. |