IBMTCPIPMVS-MIB
571 objects
The IBM Communications Server Enterprise Specific MIB definitions for enabling management of an IBM Communications Server IP system. Licensed Materials - Property of IBM Restricted Materials of IBM 5694-A01 (C) Copyright IBM Corp. 1997, 2001 US Government Users Restricted Rights - Use, duplication or disclosure restricted by GSA ADP Schedule Contract with IBM Corp.
Imported Objects
| IF-MIB | -- RFC1904 ifIndex |
| INET-ADDRESS-MIB | -- RFC2571 InetAddressType InetAddress |
| IP-FORWARD-MIB | -- RFC2233 ipForwardEntry |
| SNMP-FRAMEWORK-MIB | SnmpAdminString |
| SNMPv2-CONF | -- RFC1903 MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-SMI | BITS Counter32 enterprises Gauge32 Integer32 IpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE TimeTicks Unsigned32 |
| SNMPv2-TC | -- RFC1902 TEXTUAL-CONVENTION DateAndTime DisplayString RowStatus TruthValue |
| TCP-MIB | tcpConnEntry |
| UDP-MIB | -- RFC2012 udpEntry |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2 | Nodeibm | |||
| 1.3.6.1.4.1.2.6 | NodeibmProd | |||
| 1.3.6.1.4.1.2.6.19 | NodemvsSNMPagent | |||
| 1.3.6.1.4.1.2.6.19.1 | ScalaribmSNMPRemPing | read-only | obsolete | The number of milliseconds it takes for an icmp echo request to respond. ibmSNMPRemPing is -1 if there is an internal error, -2 if the echo request timed out, … |
| 1.3.6.1.4.1.2.6.19.2 | IdentityibmTCPIPmvsMIB | of | The IBM Communications Server Enterprise Specific MIB definitions for enabling management of an IBM Communications Server IP system. Licensed Materials - Prope… | |
| 1.3.6.1.4.1.2.6.19.2.0 | NodeibmTCPIPmvsMIBTraps | |||
| 1.3.6.1.4.1.2.6.19.2.0.1 | NotificationibmMvsAtmOsasfAtmPvcCreate | current | This trap is generated when OSA/SF sends a asynch notification to the TCP/IP DPI Subagent that a PVC was created for a given OSA Port. This notification contai… | |
| 1.3.6.1.4.1.2.6.19.2.0.2 | NotificationibmMvsAtmOsasfAtmPvcDelete | current | This trap is generated when OSA/SF sends a asyn notification to the TCP/IP DPI Subagent that a PVC was deleted for a given OSA Port. This notification contains… | |
| 1.3.6.1.4.1.2.6.19.2.0.3 | NotificationibmMvsDVIPAStatusChange | current | This trap is generated when a dynamic VIPA is defined or its status changes on a TCP/IP stack. The ibmMvsDVIPAOrigin value indicates the reason why the DVIPA w… | |
| 1.3.6.1.4.1.2.6.19.2.0.4 | NotificationibmMvsDVIPARemoved | current | This trap is generated when a dynamic VIPA is removed from a TCP/Id stack. The ibmMvsDVIPAOrigin value indicates the reason why the DVIPA was previously define… | |
| 1.3.6.1.4.1.2.6.19.2.0.5 | NotificationibmMvsDVIPATargetAdded | current | This trap is generated by a Sysplex Distributor stack when it determines that a designated target stack is active. Stacks are designated as target stacks on th… | |
| 1.3.6.1.4.1.2.6.19.2.0.6 | NotificationibmMvsDVIPATargetRemoved | current | This trap is generated by a Sysplex Distributor stack when an active target stack is removed from distribution. This can occur when a VIPADISTRIBUTE DELETE Pro… | |
| 1.3.6.1.4.1.2.6.19.2.0.7 | NotificationibmMvsDVIPATargetServerStarted | current | This trap is generated by a Sysplex Distributor stack when it receives notification from a target stack that a server has become active on a distributed port. … | |
| 1.3.6.1.4.1.2.6.19.2.0.8 | NotificationibmMvsDVIPATargetServerEnded | current | This trap is generated by a Sysplex Distributor stack when it receives notification from a target stack that a server has ended on a distributed port. The inst… | |
| 1.3.6.1.4.1.2.6.19.2.0.9 | NotificationibmMvsTcpipSubagentColdStart | current | This trap is generated by the TCP/IP Subagent. It signifies that the Subagent, acting in a subagent role, has reinitialized itself and that its configuration m… | |
| 1.3.6.1.4.1.2.6.19.2.1 | NodeibmTCPIPmvsAdmin | |||
| 1.3.6.1.4.1.2.6.19.2.2 | NodeibmTCPIPmvsMIBObjects | |||
| 1.3.6.1.4.1.2.6.19.2.2.1 | NodeibmRemotePingGroup | |||
| 1.3.6.1.4.1.2.6.19.2.2.1.1 | TableibmRemotePingTable | not-accessible | current | Defines the a remote ping table in order to use the various parameters as indeces into the table. |
| 1.3.6.1.4.1.2.6.19.2.2.1.1.1 | RowibmRemotePingEntry | not-accessible | current | Defines an entry in the ibmRemotePingTable. This table does not actual exist, but is used to faciliate passing the remote ping parameters. |
| 1.3.6.1.4.1.2.6.19.2.2.1.1.1.1 | ColumnibmMvsRPingPacketSize | not-accessible | current | Specifies the packet size in octets of the PING request. Valid values for packet size are 0 or from 16 to 4096. |
| 1.3.6.1.4.1.2.6.19.2.2.1.1.1.2 | ColumnibmMvsRPingTimeOut | not-accessible | current | Specifies the time-out value, in seconds, for the actual PING request made by the remote host. Valid values for time out are 0 or 3 to 15 seconds. |
| 1.3.6.1.4.1.2.6.19.2.2.1.1.1.3 | ColumnibmMvsRPingHostAddress | not-accessible | current | Specifies the host address used on by PING request by the remote host. The host address specified is required to be an ipAddress. |
| 1.3.6.1.4.1.2.6.19.2.2.1.1.1.4 | ColumnibmMvsRPingResponseTime | read-only | current | The result of the PING request made by the remote host: >0 Round-trip response time in milliseconds. -1 Internal error. -2 ICMP echo request timed out. -4 Inco… |
| 1.3.6.1.4.1.2.6.19.2.2.2 | NodeibmTcpipMvsSystem | |||
| 1.3.6.1.4.1.2.6.19.2.2.2.1 | ScalaribmMvsSubagentCacheTime | read-write | current | Specifies the amount of time to wait for re-retrieval of specific MIB data from target. A value of 0 implies that every GET or GET-NEXT request should result i… |
| 1.3.6.1.4.1.2.6.19.2.2.2.2 | ScalaribmMvsIgnoreRedirect | read-write | current | IP Layer attribute, default of process redirects. current stack: IGNOREREDIRECT parm on ASSORTEDPARMS statement |
| 1.3.6.1.4.1.2.6.19.2.2.2.3 | ScalaribmMvsArpCacheTimeout | read-write | current | IF Layer attribute. ARP cache timeout - ARPAGE statement; default= 1200 seconds; 60 <= ARPAGE <= 86400 (24 hours). current stack: ARPAGE statement; default= 20… |
| 1.3.6.1.4.1.2.6.19.2.2.2.4 | ScalaribmMvsTcpKeepAliveTimer | read-write | current | TCP Keepalive timer, expressed in minutes. A value of 0 deactivates the timer. |
| 1.3.6.1.4.1.2.6.19.2.2.2.5 | ScalaribmMvsTcpReceiveBufferSize | read-write | current | TCP Receive buffer size, expressed in bytes. |
| 1.3.6.1.4.1.2.6.19.2.2.2.6 | ScalaribmMvsTcpSendBufferSize | read-write | current | TCP Send buffer size, expressed in bytes. |
| 1.3.6.1.4.1.2.6.19.2.2.2.7 | ScalaribmMvsUdpChecksum | read-write | current | UDP checksum - on or off |
| 1.3.6.1.4.1.2.6.19.2.2.2.8 | ScalaribmMvsIplDateAndTime | read-only | current | The date and time that this TCP/IP instance was started. sysUpTime provides the time from when the SNMP Agent was started, not corresponding TCP/IP instance. |
| 1.3.6.1.4.1.2.6.19.2.2.2.9 | ScalaribmMvsNoUdpQueueLimit | read-write | current | Indicates if the UDP queue limit of 163,840 bytes of UDP data per socket is in effect or not. 163,840 is equal to 8K times 20 datagrams. This limit is based on… |
| 1.3.6.1.4.1.2.6.19.2.2.2.10 | ScalaribmMvsSoMaxConn | read-write | current | Maximum number of socket connections. |
| 1.3.6.1.4.1.2.6.19.2.2.2.11 | ScalaribmMvsTcpipProcname | read-only | current | MVS Procname of this TCP/IP instance. |
| 1.3.6.1.4.1.2.6.19.2.2.2.12 | ScalaribmMvsTcpipAsid | read-only | current | MVS Address Space ID of this TCP/IP instance. |
| 1.3.6.1.4.1.2.6.19.2.2.2.13 | ScalaribmMvsSourceVipaEnabled | read-only | current | Indicates if set to true(1) that SOURCEVIPA support is enabled. This object can be changed via the ASSORTEDPARMS TCP/IP Profile statement. |
| 1.3.6.1.4.1.2.6.19.2.2.2.14 | ScalaribmMvsOsasfSysplexName | read-only | current | Sysplex name, if unknown the value of the zero length string |
| 1.3.6.1.4.1.2.6.19.2.2.2.15 | ScalaribmMvsOsasfHostName | read-only | current | OSASF Host Name, if unknown the value of the zero length string |
| 1.3.6.1.4.1.2.6.19.2.2.2.16 | ScalaribmMvsOsasfProductVersion | read-only | current | version/release of product, if unknown the value of the zero length string |
| 1.3.6.1.4.1.2.6.19.2.2.2.17 | ScalaribmMvsPrimaryInterfaceIfIndex | read-write | current | The ifIndex of the designated primary interface. A value of zero implies that this option wasn't configured. |
| 1.3.6.1.4.1.2.6.19.2.2.2.18 | ScalaribmMvsIpMaxReassemblySize | read-only | current | The maximum ip reassembly size in units of octets. |
| 1.3.6.1.4.1.2.6.19.2.2.2.19 | ScalaribmMvsTcpRestrictLowPorts | read-write | current | Indicates if TCP low ports are restricted to authorized servers/socket applications. |
| 1.3.6.1.4.1.2.6.19.2.2.2.20 | ScalaribmMvsUdpRestrictLowPorts | read-write | current | Indicates if UDP low ports are restricted to authorized servers/socket applications. |
| 1.3.6.1.4.1.2.6.19.2.2.2.21 | ScalaribmMvsUdpSendBufferSize | read-write | current | The default UDP send buffer size. |
| 1.3.6.1.4.1.2.6.19.2.2.2.22 | ScalaribmMvsUdpRecvBufferSize | read-write | current | The default UDP receive buffer size. |
| 1.3.6.1.4.1.2.6.19.2.2.2.23 | ScalaribmMvsTcpipStatisticsEnabled | read-only | current | Indicates if set to true(1) that the generation of tcp/ip statistics is enabled. Statistics if enabled will be recorded at the SMF interval via SMF record subt… |
| 1.3.6.1.4.1.2.6.19.2.2.2.24 | ScalaribmMvsFirewallEnabled | read-only | current | Indicates if set to true(1) that firewall support is enabled. This object can be changed via the IPCONFIG TCP/IP Profile statement. |
| 1.3.6.1.4.1.2.6.19.2.2.2.25 | ScalaribmMvsMaximumRetransmitTime | read-only | current | Used in the TCP/IP re-transmission time-out calculation to determine how long to wait for an acknowledgement before resending a packet. Expressed as a integer … |
| 1.3.6.1.4.1.2.6.19.2.2.2.26 | ScalaribmMvsMinimumRetransmitTime | read-only | current | Used in the TCP/IP re-transmission time-out calculation to determine how long to wait for an acknowledgement before resending a packet. Expressed as a integer … |
| 1.3.6.1.4.1.2.6.19.2.2.2.27 | ScalaribmMvsRoundTripGain | read-only | current | Used in the TCP/IP re-transmission time-out calculation to determine how long to wait for an acknowledgement before resending a packet. Expressed as a integer … |
| 1.3.6.1.4.1.2.6.19.2.2.2.28 | ScalaribmMvsVarianceGain | read-only | current | Used in the TCP/IP re-transmission time-out calculation to determine how long to wait for an acknowledgement before resending a packet. Expressed as a integer … |
| 1.3.6.1.4.1.2.6.19.2.2.2.29 | ScalaribmMvsVarianceMultiplier | read-only | current | Used in the TCP/IP re-transmission time-out calculation to determine how long to wait for an acknowledgement before resending a packet. Expressed as a integer … |
| 1.3.6.1.4.1.2.6.19.2.2.2.30 | ScalaribmMvsSendGarbageEnabled | read-only | current | If true(1) indicates that the TCP option SENDGARBAGE is enabled. |
| 1.3.6.1.4.1.2.6.19.2.2.2.31 | ScalaribmMvsTcpMaxReceiveBufferSize | read-write | current | TCP Maximum Receive buffer size, expressed in bytes. |
| 1.3.6.1.4.1.2.6.19.2.2.2.32 | ScalaribmMvsMultipathEnabled | read-write | obsolete | If true(1) indicates that the MULTIPATH IP option is enabled. If false(2) indicates that the MULTIPATH IP option is disabled. This object is obsolete. It has b… |
| 1.3.6.1.4.1.2.6.19.2.2.2.33 | ScalaribmMvsPathMtuDscEnabled | read-write | current | If true(1) indicates that the PATHMTUDISCOVERY IP option is enabled. If false(2) indicates that the PATHMTUDISCOVERY IP option is disabled. |
| 1.3.6.1.4.1.2.6.19.2.2.2.34 | ScalaribmMvsMultipathType | read-write | current | The type of Multipath processing currently active. The types are defined under the MULTIPATH parameter on the IPCONFIG Profile statement. |
| 1.3.6.1.4.1.2.6.19.2.2.2.35 | ScalaribmMvsIpForwarding | read-write | current | The indication of whether this entity is acting as an IP router in respect to the forwarding of datagrams received by, but not addressed to, this entity. If th… |
| 1.3.6.1.4.1.2.6.19.2.2.2.36 | ScalaribmMvsDevRetryDuration | read-write | current | Specifies the duration of the retry period for a failed device. TCP/IP will perform reactivation attempts at 30 second intervals during this retry period. The … |
| 1.3.6.1.4.1.2.6.19.2.2.2.37 | ScalaribmMvsTcpFinwait2Time | read-write | current | The number of seconds a TCP connection should remain in the FINWAIT2 state. When this timer expires, it is reset to 75 seconds. When it expires a second time t… |
| 1.3.6.1.4.1.2.6.19.2.2.2.38 | ScalaribmMvsTcpTimeStamp | read-write | current | If true(1), indicates that the TCPTIMESTAMP option was specified (or defaulted to) on the TCPCONFIG Profile statement. For active connections (TCP/IP initiates… |
| 1.3.6.1.4.1.2.6.19.2.2.2.39 | ScalaribmMvsTcpipSubagentVersion | read-only | current | The version/release of the TCP/IP Subagent. The actual product names associated with the values of this object are: v1r2(1) - z/OS V1R2 Communications Server |
| 1.3.6.1.4.1.2.6.19.2.2.3 | NodeibmTcpipMvsInterfaceGroup | |||
| 1.3.6.1.4.1.2.6.19.2.2.3.1 | TableibmTcpipMvsDeviceTable | not-accessible | current | Defines the device definition known to an IBM MVS TCP/IP system. A virtual interface entry exists for every entry in this table. |
| 1.3.6.1.4.1.2.6.19.2.2.3.1.1 | RowibmTcpipMvsDeviceEntry | not-accessible | current | Descibes a particular device definition |
| 1.3.6.1.4.1.2.6.19.2.2.3.1.1.1 | ColumnibmMvsDeviceType | read-only | current | Indicates the device type. |
| 1.3.6.1.4.1.2.6.19.2.2.3.1.1.2 | ColumnibmMvsDeviceBaseNumber | read-only | current | If this entry is for a CTC, HCH or Vipa device then this object represents its base device number. For an LCS device this object represents the lcs address. Fo… |
| 1.3.6.1.4.1.2.6.19.2.2.3.1.1.3 | ColumnibmMvsDeviceIoBufferSize | read-only | current | The I/O buffersize attribute for this device definition. This is only value for a CTC Device. A reported value of -1 implies that the corresponding device does… |
| 1.3.6.1.4.1.2.6.19.2.2.3.1.1.4 | ColumnibmMvsDeviceAutoRestart | read-only | current | A value of true indicates that this device was defined as autorestartable. False indicates that it was not. |
| 1.3.6.1.4.1.2.6.19.2.2.3.1.1.5 | ColumnibmMvsDeviceNetmanEnabled | read-only | current | A value of 1 indicates that this is an LCS device that was defined to support the 3172 ICP MIB. A value of 0 indicates that this is an LCS device that was not … |
| 1.3.6.1.4.1.2.6.19.2.2.3.1.1.6 | ColumnibmMvsDeviceHostClawName | read-only | current | A non NULL OCTET STRING implies that this is the Host Claw Name for a CLAW Device definition. |
| 1.3.6.1.4.1.2.6.19.2.2.3.1.1.7 | ColumnibmMvsDeviceWorkstationClawName | read-only | current | A non NULL OCTET STRING implies that this is the Workstation Claw name for a CLAW Device definition. |
| 1.3.6.1.4.1.2.6.19.2.2.3.1.1.8 | ColumnibmMvsDeviceReadBuffers | read-only | current | The number of read buffers for either a CLAW RS/6000 IP or a CDLC device definition. A value of -1 implies that the value of this object is invalid. |
| 1.3.6.1.4.1.2.6.19.2.2.3.1.1.9 | ColumnibmMvsDeviceReadSize | read-only | current | The read buffer size for either a CLAW RS/6000 IP or a CDLC device definition. A value of -1 implies that the value of this object is invalid. |
| 1.3.6.1.4.1.2.6.19.2.2.3.1.1.10 | ColumnibmMvsDeviceWriteBuffers | read-only | current | The number of write buffers for either a CLAW RS/6000 IP or a CDLC device definition. A value of -1 implies that the value of this object is invalid. |
| 1.3.6.1.4.1.2.6.19.2.2.3.1.1.11 | ColumnibmMvsDeviceWriteSize | read-only | current | The write buffer size for either a CLAW RS/6000 IP or a CDLC device definition. A value of -1 implies that the value of this object is invalid. |
| 1.3.6.1.4.1.2.6.19.2.2.3.1.1.12 | ColumnibmMvsDeviceProcname | read-only | current | A non NULL OCTET STRING implies that this is the procname for an X25NPSI, SNA LU0, or SNA LU6.2 Device definition. |
| 1.3.6.1.4.1.2.6.19.2.2.3.1.1.13 | ColumnibmMvsDeviceIncomingSvcEnabled | read-only | current | This object is valid only for an ATM Device. If true then incoming SVCs will be allowed. A value of false for an ATM Device implies that incoming SVC call setu… |
| 1.3.6.1.4.1.2.6.19.2.2.3.1.1.14 | ColumnibmMvsDeviceLuName | read-only | current | A non NULL OCTET STRING implies that this is the Logical Unit name for a SNA LU0 Device definition. |
| 1.3.6.1.4.1.2.6.19.2.2.3.1.1.15 | ColumnibmMvsDeviceRouterStatus | read-only | current | This object is valid only for an MPCIPA device and reflects the specified or default parameter from the MPCIPA DEVICE Profile statement. For other devices the … |
| 1.3.6.1.4.1.2.6.19.2.2.3.1.1.16 | ColumnibmMvsDeviceActualRouterStatus | read-only | current | This object is valid only for an MPCIPA device and is determined when the device is started. For other devices the value will be set to -1. When the device is … |
| 1.3.6.1.4.1.2.6.19.2.2.3.1.1.17 | ColumnibmMvsDeviceConfigPackingMode | read-only | current | This object is valid only for a CLAW device and is specified on the CLAW Device definition. For other devices the value will be set to -1. A value of 1 implies… |
| 1.3.6.1.4.1.2.6.19.2.2.3.1.1.18 | ColumnibmMvsDeviceActualPackingMode | read-only | current | This object is valid only for a CLAW device and is determined when the device is started. For other devices the value will be set to -1. A value of 1 implies t… |
| 1.3.6.1.4.1.2.6.19.2.2.3.2 | TableibmTcpipMvsLinkTable | not-accessible | current | Defines the link definition known to an IBM MVS TCP/IP system. A physical interface entry exists for every entry in this table. |
| 1.3.6.1.4.1.2.6.19.2.2.3.2.1 | RowibmTcpipMvsLinkEntry | not-accessible | current | Descibes a particular link definition |
| 1.3.6.1.4.1.2.6.19.2.2.3.2.1.1 | ColumnibmMvsLinkType | read-only | current | Indicates the link type. |
| 1.3.6.1.4.1.2.6.19.2.2.3.2.1.2 | ColumnibmMvsLinkDeviceIndex | read-only | current | ifIndex of corresponding DEVICE entry. |
| 1.3.6.1.4.1.2.6.19.2.2.3.2.1.3 | ColumnibmMvsLinkAdapterAddr | read-only | current | The adapter address associated with this link definition. A value of -1 indicates that this object is invalid for the corresponding link table entry. |
| 1.3.6.1.4.1.2.6.19.2.2.3.2.1.4 | ColumnibmMvsLinkNumber | read-only | current | The link number associated with this link definition. A value of -1 indicates that this object is invalid for the corresponding link table entry. |
| 1.3.6.1.4.1.2.6.19.2.2.3.2.1.5 | ColumnibmMvsLinkIbmtrCanonical | read-only | current | For an IBMTR LCS Link, a value of 1 implies that this link was defined with a value of CANONICAL. A value of 0 implies this link was defined with a value of NO… |
| 1.3.6.1.4.1.2.6.19.2.2.3.2.1.6 | ColumnibmMvsLinkIbmtrBcast | read-only | current | For a IBMTR LCS Link, a value of 1 implies that this link was defined with a value of ALLRINGSBCAST. A value of 2 implies this link was defined with a value of… |
| 1.3.6.1.4.1.2.6.19.2.2.3.2.1.7 | ColumnibmMvsLinkMcast | read-only | current | A value of true(1) indicates that the link is capable of receiving multicast datagrams. A value of false(2) indicates that either the link is not capable of re… |
| 1.3.6.1.4.1.2.6.19.2.2.3.2.1.8 | ColumnibmMvsLinkChecksumEnabled | read-only | current | The value of this object can vary only for MPCPTP LINK interfaces. For all other LINK interfaces the value is set to true(1). A value of true(1) indicates that… |
| 1.3.6.1.4.1.2.6.19.2.2.3.2.1.9 | ColumnibmMvsLinkArpSupport | read-only | current | This object reflects the status of the interface's ARP support. A value of 'none' indicates that the interface does not support ARP. If the interface supports … |
| 1.3.6.1.4.1.2.6.19.2.2.3.2.1.10 | ColumnibmMvsLinkMacAddress | read-only | current | A 6 byte OCTET STRING which contains the configured MAC address for IPAQTR link interfaces. If the MAC address was not specified, or if the interface is not an… |
| 1.3.6.1.4.1.2.6.19.2.2.3.3 | TableibmTcpipMvsLinkMcastTable | not-accessible | current | The table listing those multicast groups for which an application wishes to receive multicast data. An application requests this by issuing a setsockopt() with… |
| 1.3.6.1.4.1.2.6.19.2.2.3.3.1 | RowibmTcpipMvsLinkMcastEntry | not-accessible | current | An entry representing a multicast group on an interface. |
| 1.3.6.1.4.1.2.6.19.2.2.3.3.1.1 | ColumnibmMvsLinkMcastGroupAddr | not-accessible | current | Specifies the ipAddress of the multicast group |
| 1.3.6.1.4.1.2.6.19.2.2.3.3.1.2 | ColumnibmMvsLinkMcastRefCount | read-only | current | A count of the number of sockets that are members of this multicast group. |
| 1.3.6.1.4.1.2.6.19.2.2.4 | NodeibmTcpipMvsPortGroup | |||
| 1.3.6.1.4.1.2.6.19.2.2.4.1 | TableibmTcpipMvsPortTable | not-accessible | current | Reserved ports within a TCP/IP address space. |
| 1.3.6.1.4.1.2.6.19.2.2.4.1.1 | RowibmTcpipMvsPortEntry | not-accessible | current | Defines a single ibmTcpipMvsPortTable entry. |
| 1.3.6.1.4.1.2.6.19.2.2.4.1.1.1 | ColumnibmMvsPortNumberLow | read-only | current | Low port number of entry. |
| 1.3.6.1.4.1.2.6.19.2.2.4.1.1.2 | ColumnibmMvsPortNumberHigh | read-only | current | High port number of entry. |
| 1.3.6.1.4.1.2.6.19.2.2.4.1.1.3 | ColumnibmMvsPortProtocol | read-only | current | The protocol of the associating port entry. |
| 1.3.6.1.4.1.2.6.19.2.2.4.1.1.4 | ColumnibmMvsPortProcName | read-only | current | Text Name of the associating mvs procedure. |
| 1.3.6.1.4.1.2.6.19.2.2.4.1.1.5 | ColumnibmMvsPortAutoLoggable | read-only | current | Should proc be autologged. |
| 1.3.6.1.4.1.2.6.19.2.2.4.1.1.6 | ColumnibmMvsPortDelayAcks | read-only | current | A value of true implies that DELAYACKS was selected for this port entry. |
| 1.3.6.1.4.1.2.6.19.2.2.4.1.1.7 | ColumnibmMvsPortOptMaxSegmentSize | read-only | current | A value of true implies that the Optimal Maximum Segment Size option was selected for this port entry. |
| 1.3.6.1.4.1.2.6.19.2.2.4.1.1.8 | ColumnibmMvsPortSharePort | read-only | current | A value of true implies that SHAREPORT was selected for this port entry. |
| 1.3.6.1.4.1.2.6.19.2.2.4.1.1.9 | ColumnibmMvsPortBindIpAddr | read-only | current | The IP address specified on the BIND parameter of the PORT Profile statement. If an application issues a bind() with an IP address of zeros (INADDR_ANY), the v… |
| 1.3.6.1.4.1.2.6.19.2.2.4.1.1.10 | ColumnibmMvsPortSAFResource | read-only | current | The SAF resource name specified on the SAF parameter of the PORT Profile statement. The value of this MIB object is appended to a security product profile name… |
| 1.3.6.1.4.1.2.6.19.2.2.4.1.1.11 | ColumnibmMvsPortReuse | read-only | current | This object only applies to TCP port entries. A value of true(1) means that the port is reusable, as if the SO_REUSEADDR socket option had been set in a socket… |
| 1.3.6.1.4.1.2.6.19.2.2.5 | NodeibmTcpipMvsRouteGroup | |||
| 1.3.6.1.4.1.2.6.19.2.2.5.1 | TableibmTcpipMvsGatewayTable | not-accessible | current | Extends ipForwardTable to support gateway semantic. |
| 1.3.6.1.4.1.2.6.19.2.2.5.1.1 | RowibmTcpipMvsGatewayEntry | not-accessible | current | Descibes a particular gateway entry |
| 1.3.6.1.4.1.2.6.19.2.2.5.1.1.1 | ColumnibmMvsGatewayMaximumRetransmitTime | read-only | current | Used in the TCP/IP re-transmission time-out calculation to determine how long to wait for an acknowledgement before resending a packet. Expressed as a integer … |
| 1.3.6.1.4.1.2.6.19.2.2.5.1.1.2 | ColumnibmMvsGatewayMinimumRetransmitTime | read-only | current | Used in the TCP/IP re-transmission time-out calculation to determine how long to wait for an acknowledgement before resending a packet. Expressed as a integer … |
| 1.3.6.1.4.1.2.6.19.2.2.5.1.1.3 | ColumnibmMvsGatewayRoundTripGain | read-only | current | Used in the TCP/IP re-transmission time-out calculation to determine how long to wait for an acknowledgement before resending a packet. Expressed as a integer … |
| 1.3.6.1.4.1.2.6.19.2.2.5.1.1.4 | ColumnibmMvsGatewayVarianceGain | read-only | current | Used in the TCP/IP re-transmission time-out calculation to determine how long to wait for an acknowledgement before resending a packet. Expressed as a integer … |
| 1.3.6.1.4.1.2.6.19.2.2.5.1.1.5 | ColumnibmMvsGatewayVarianceMultiplier | read-only | current | Used in the TCP/IP re-transmission time-out calculation to determine how long to wait for an acknowledgement before resending a packet. Expressed as a integer … |
| 1.3.6.1.4.1.2.6.19.2.2.5.1.1.6 | ColumnibmMvsGatewayDelayAcks | read-only | current | Delays transmission of acknowledgements when a packet is received with the PUSH bit on in the TCP header. The DELAYACKS parameter on the GATEWAY statement only… |
| 1.3.6.1.4.1.2.6.19.2.2.6 | NodeibmTcpipMvsAtmGroup | |||
| 1.3.6.1.4.1.2.6.19.2.2.6.1 | TableosasfChannelTable | not-accessible | current | Indexed by ifIndex. One entry in this table will exist per OSA-2 ATM Device Interface. If the values for objects ibmMvsAtmOsasfChannelCurLparName/Num are not t… |
| 1.3.6.1.4.1.2.6.19.2.2.6.1.1 | RowosasfChannelEntry | not-accessible | current | Definition of a single entry in the osasfChannelTable. Indexed by the ifIndex of the corresponding DEVICE interface. |
| 1.3.6.1.4.1.2.6.19.2.2.6.1.1.1 | ColumnibmMvsAtmOsasfChannelNumber | read-only | current | The channel number for this interface |
| 1.3.6.1.4.1.2.6.19.2.2.6.1.1.2 | ColumnibmMvsAtmOsasfChannelType | read-only | current | The value will be osa(18) for ATM OSA-2 adapters. The values of osaExp155(16) and osaExp155QDIO(17) apply only to OSA-Express ATM155 adapters. Since the channe… |
| 1.3.6.1.4.1.2.6.19.2.2.6.1.1.3 | ColumnibmMvsAtmOsasfChannelSubType | read-only | current | Indicates how the channel is configured. The value is one of the following: -1 - Invalid 0 - Unknown 1 - Ethernet 2 - Token Ring 3 - Two Token Ring ports 4 - T… |
| 1.3.6.1.4.1.2.6.19.2.2.6.1.1.4 | ColumnibmMvsAtmOsasfChannelMode | read-only | current | Config mode of the ATM adapter. |
| 1.3.6.1.4.1.2.6.19.2.2.6.1.1.5 | ColumnibmMvsAtmOsasfChannelHwModel | read-only | current | Hardware model of the channel. The field NDModelNum contained in ibmMvsAtmOsasfChannelDeterNodeDesc is a char(3) field that contains a readable format of this … |
| 1.3.6.1.4.1.2.6.19.2.2.6.1.1.6 | ColumnibmMvsAtmOsasfChannelState | read-only | current | Hardware channel state: online, offline, or not installed. |
| 1.3.6.1.4.1.2.6.19.2.2.6.1.1.7 | ColumnibmMvsAtmOsasfChannelShared | read-only | current | An OSA Channel can be shared across multiple LPARs. This object indicates if this channel is currently being shared. |
| 1.3.6.1.4.1.2.6.19.2.2.6.1.1.8 | ColumnibmMvsAtmOsasfChannelNumPorts | read-only | current | Number of physical ports on OSA channel. |
| 1.3.6.1.4.1.2.6.19.2.2.6.1.1.9 | ColumnibmMvsAtmOsasfChannelDeterNodeDesc | read-only | current | Describes the generic node descriptor layout. This object represents the ND obtained from the CHSC instruction: /* ND Flags */ int bValidity :3; /* 1:is ND val… |
| 1.3.6.1.4.1.2.6.19.2.2.6.1.1.10 | ColumnibmMvsAtmOsasfChannelControlUnitNumber | read-only | current | The control unit number associated with the OSA Channel. |
| 1.3.6.1.4.1.2.6.19.2.2.6.1.1.11 | ColumnibmMvsAtmOsasfChannelCodeLevel | read-only | current | ibmMvsAtmOsasfChannelCodeLevel is the firmware (or micro code level) of the OSA adapter. For example, ATM OSA-2 adapter level 05.60 would be represented as 0x0… |
| 1.3.6.1.4.1.2.6.19.2.2.6.1.1.12 | ColumnibmMvsAtmOsasfChannelEcLevel | read-only | obsolete | The Box EC Level Identifier of the OSA adapter which identifies the current Engineering Change (EC) Level of this OSA adapter (Channel). |
| 1.3.6.1.4.1.2.6.19.2.2.6.1.1.13 | ColumnibmMvsAtmOsasfChannelCurLparName | read-only | current | LPAR name of the OSA/SF from which this data was retrieved from |
| 1.3.6.1.4.1.2.6.19.2.2.6.1.1.14 | ColumnibmMvsAtmOsasfChannelCurLparNum | read-only | current | LPAR number of the OSA/SF from which this data was retrieved |
| 1.3.6.1.4.1.2.6.19.2.2.6.1.1.15 | ColumnibmMvsAtmOsasfChannelManParnName | read-only | current | LPAR name of the OSA Support Facility managing this channel. Only one OSA/SF can manage a OSA Channel within an MVS Sysplex even though multiple OSA/SFs can re… |
| 1.3.6.1.4.1.2.6.19.2.2.6.1.1.16 | ColumnibmMvsAtmOsasfChannelManParnNum | read-only | current | LPAR number of the OSA Support Facility managing this channel (set to 0xFFFF if not being managed by a OSA/SF). |
| 1.3.6.1.4.1.2.6.19.2.2.6.1.1.17 | ColumnibmMvsAtmOsasfChannelDate | read-only | obsolete | Date on this channel (set to 'NOTVALID' if there the disk serving function is not active). |
| 1.3.6.1.4.1.2.6.19.2.2.6.1.1.18 | ColumnibmMvsAtmOsasfChannelTime | read-only | obsolete | Time on this channel (set to 'NOTVALID' if there the disk serving function is not active). |
| 1.3.6.1.4.1.2.6.19.2.2.6.1.1.19 | ColumnibmMvsAtmOsasfChannelFlashLevel | read-only | current | Flashlevel is the LAN driver level running on an OSA adapter. For OSA-1 and OSA-2, there is only 1 LAN driver. For OSA-2 ATM, you can have up to 2 LAN driver. … |
| 1.3.6.1.4.1.2.6.19.2.2.6.1.1.20 | ColumnibmMvsAtmOsasfChannelVtamId | read-only | obsolete | VTAM ID if in SNA mode |
| 1.3.6.1.4.1.2.6.19.2.2.6.2 | TableosasfPortTable | not-accessible | current | This table is intended to represent the ports supported (or associated) with the osasfChannelTable entries and, for OSA-Express ATM155 adapters, with the osaex… |
| 1.3.6.1.4.1.2.6.19.2.2.6.2.1 | RowosasfPortEntry | not-accessible | current | Describes a particular OSA port entry, index by corresponding AAL5 entry's ifIndex. |
| 1.3.6.1.4.1.2.6.19.2.2.6.2.1.1 | ColumnibmMvsAtmOsasfPortNumber | read-only | current | Port number, starts at 0. |
| 1.3.6.1.4.1.2.6.19.2.2.6.2.1.2 | ColumnibmMvsAtmOsasfPortType | read-only | current | For an ATM OSA-2 adapter configured for ATM native traffic, the value of this object is atm(9). For an ATM OSA-2 adapter configured for ATM LAN Emulation, the … |
| 1.3.6.1.4.1.2.6.19.2.2.6.2.1.3 | ColumnibmMvsAtmOsasfPortHardwareState | read-only | current | The hardware state value ranges from 0 to 6 as follows: 0 - enable 1 - disabled from host 2 - disabled from external source 3 - disabled from internal error 4 … |
| 1.3.6.1.4.1.2.6.19.2.2.6.2.1.4 | ColumnibmMvsAtmOsasfPortMediaType | read-only | current | ILMI atmfPortMediaType equivalent. OSA supports types 2 and 3 |
| 1.3.6.1.4.1.2.6.19.2.2.6.2.1.5 | ColumnibmMvsAtmOsasfPortUniType | read-only | current | ILMI atmfAtmLayerUniType. OSA supports only 2 |
| 1.3.6.1.4.1.2.6.19.2.2.6.2.1.6 | ColumnibmMvsAtmOsasfPortUniVersion | read-only | current | ILMI atmfAtmLayerUniVersion. OSA supports only 3. This is the highest UNI version supported. |
| 1.3.6.1.4.1.2.6.19.2.2.6.2.1.7 | ColumnibmMvsAtmOsasfPortNetPrefix | read-only | current | A unique value which identifies the UNI port for which the network prefix for ATM addresses is in effect. The value of 0 has the special meaning of identifying… |
| 1.3.6.1.4.1.2.6.19.2.2.6.2.1.8 | ColumnibmMvsAtmOsasfPortNetPrefixPrefix | read-only | current | The network prefix for ATM addresses which is in effect on the user-side of the ATM UNIT port. Network prefix is defined as the ATM address, not including the … |
| 1.3.6.1.4.1.2.6.19.2.2.6.2.1.9 | ColumnibmMvsAtmOsasfPortNetPrefixStatus | read-only | current | Equivalent to the atmfNetPrefixStatus as defined in the Network Prefix Table in the ILMI Address Registration MIB. An indication of the validity of the network… |
| 1.3.6.1.4.1.2.6.19.2.2.6.2.1.10 | ColumnibmMvsAtmOsasfPortCodeLoadStatus | read-only | current | This object specifies whether the ATM code has been loaded on to the adapter. The configRejected state indicates that the ATM configuration file download via O… |
| 1.3.6.1.4.1.2.6.19.2.2.6.2.1.11 | ColumnibmMvsAtmOsasfPortMacAddrBurntIn | read-only | current | A 6 byte OCTET STRING which contains the adapter's burned in MAC address. Does not apply to ATM OSA-2 device configured for ATM IP Forwarding mode. |
| 1.3.6.1.4.1.2.6.19.2.2.6.2.1.12 | ColumnibmMvsAtmOsasfPortMacAddrActive | read-only | current | A 6 byte OCTET STRING which contains the current MAC address in use on the adapter. Does not apply to ATM OSA-2 device configured for ATM IP Forwarding mode. |
| 1.3.6.1.4.1.2.6.19.2.2.6.2.1.13 | ColumnibmMvsAtmOsasfPortMaxPcmConnections | read-only | current | Specifies the maximum number of connects on an OSA port which can be used for ATM exploitation purposes. It can range from 0 to the number specified by atmInte… |
| 1.3.6.1.4.1.2.6.19.2.2.6.2.1.14 | ColumnibmMvsAtmOsasfPortPcmName | read-only | current | Specifies the Port Name which must also be entered at the connection manager on the host and the application. Port Name is specifed to OSA/SF as a config file … |
| 1.3.6.1.4.1.2.6.19.2.2.6.2.1.15 | ColumnibmMvsAtmOsasfPortAAL5InPackets | read-only | current | inbound packets at the corresponding AAL5 interface layer. |
| 1.3.6.1.4.1.2.6.19.2.2.6.2.1.16 | ColumnibmMvsAtmOsasfPortAAL5OutPackets | read-only | current | outbound packets at the corresponding AAL5 interface layer. |
| 1.3.6.1.4.1.2.6.19.2.2.6.2.1.17 | ColumnibmMvsAtmOsasfPortIpAddress | read-write | current | The managing IpAddress reported by the ATM port as its atmfMyIpNmAddress as specified by the ATM Forum User-NetworkInterface (UNI) specification. An SNMP Set f… |
| 1.3.6.1.4.1.2.6.19.2.2.6.3 | TableosasfPvcTable | not-accessible | current | This table is intended to represent the locally configured PVCs associated with a given OSA Port. There is a limit of 128 PVCs per Port per Channel. |
| 1.3.6.1.4.1.2.6.19.2.2.6.3.1 | RowosasfPvcEntry | not-accessible | current | This object is intended to represent a single PVC entry for the osasfPvcTable. |
| 1.3.6.1.4.1.2.6.19.2.2.6.3.1.1 | ColumnibmMvsAtmOsasfPvcName | read-only | current | PVC Name |
| 1.3.6.1.4.1.2.6.19.2.2.6.3.1.2 | ColumnibmMvsAtmOsasfPvcBestEffort | read-only | current | Best Effort rate. 0 indicated that best effort delivery is not desired. 1 indicates that best effort delivery is desired. |
| 1.3.6.1.4.1.2.6.19.2.2.6.3.1.3 | ColumnibmMvsAtmOsasfPvcFwdPeakCellRate | read-only | current | Forward peak cell rate specified as cells per second. Needed in order to set up either a best effort or a reserved bandwidth PVC. It applies to the outbound di… |
| 1.3.6.1.4.1.2.6.19.2.2.6.3.1.4 | ColumnibmMvsAtmOsasfPvcBwdPeakCellRate | read-only | current | Backward peak cell rate specified as cells per second. Needed in order to set up either a best effort or a reserved bandwidth PVC. It applies to the inbound di… |
| 1.3.6.1.4.1.2.6.19.2.2.6.3.1.5 | ColumnibmMvsAtmOsasfPvcFwdsustainCellRate | read-only | current | Forward sustain cell rate specified as cells per second. If the best effort indicator is on, the value of this object is ignored. Otherwise (for a reserved ban… |
| 1.3.6.1.4.1.2.6.19.2.2.6.3.1.6 | ColumnibmMvsAtmOsasfPvcBwdsustainCellRate | read-only | current | Backward sustain cell rate specified as cells per second. If the best effort indicator is on, the value of this object is ignored. Otherwise (for a reserved ba… |
| 1.3.6.1.4.1.2.6.19.2.2.6.3.1.7 | ColumnibmMvsAtmOsasfPvcFwdCellBurstSize | read-only | current | Forward cell burst size specified as number of cells. If the best effort indicator is on, the value of this object is ignored. Otherwise (for a reserved bandwi… |
| 1.3.6.1.4.1.2.6.19.2.2.6.3.1.8 | ColumnibmMvsAtmOsasfPvcBwdCellBurstSize | read-only | current | Backward cell burst size specified as number of cells. If the best effort indicator is on, the value of this object is ignored. Otherwise (for a reserved bandw… |
| 1.3.6.1.4.1.2.6.19.2.2.6.3.1.9 | ColumnibmMvsAtmOsasfPvcVpi | read-only | current | vpi for this PVC |
| 1.3.6.1.4.1.2.6.19.2.2.6.3.1.10 | ColumnibmMvsAtmOsasfPvcVci | read-only | current | vci for this PVC. This value must be greater than or equal to 32 since the first 32 vci code points have been reserved by the ATM Forum. |
| 1.3.6.1.4.1.2.6.19.2.2.6.3.1.11 | ColumnibmMvsAtmOsasfPvcFwdMaxAal5PduSize | read-only | current | This field is used to setup the PVC. Units are in OCTETs and represents the largest PDU size for the AAL5 CPCS layer that can be processed in the forward direc… |
| 1.3.6.1.4.1.2.6.19.2.2.6.3.1.12 | ColumnibmMvsAtmOsasfPvcBwdMaxAal5PduSize | read-only | current | This field is used to setup the PVC. Units are in OCTETs and represents the largest PDU size for the AAL5 CPCS layer that can be processed in the backward dire… |
| 1.3.6.1.4.1.2.6.19.2.2.6.4 | TableibmMvsAtmSnaLeTable | not-accessible | current | This table is intended to represent the data that is available from an OSA Port that is running SNA LAN Emulation mode. An entry in this table is indexed by a … |
| 1.3.6.1.4.1.2.6.19.2.2.6.4.1 | RowibmMvsAtmSnaLeEntry | not-accessible | current | Describes a particular OSA SNA LAN Emulation entry, index by corresponding LAN Emulation ifIndex. |
| 1.3.6.1.4.1.2.6.19.2.2.6.4.1.1 | ColumnibmMvsAtmSnaLeLlcTi | read-only | current | The inactivity timer. An enabled inactivity timer (Ti) periodically tests the viability of the network media. The timer setting applies to all the clients on t… |
| 1.3.6.1.4.1.2.6.19.2.2.6.4.1.2 | ColumnibmMvsAtmSnaLeLlcT1 | read-only | current | The response timer. The T1 timer clocks link events that require responses from clients on the network. These link events include SABME/UA exchanges, I-frame l… |
| 1.3.6.1.4.1.2.6.19.2.2.6.4.1.3 | ColumnibmMvsAtmSnaLeLlcT2 | read-only | current | The acknowledgement timer. An OSA starts the T2 timer when it receives an I-format LPDU and stops when it sends an acknowledgement. An acknowledgement is sent … |
| 1.3.6.1.4.1.2.6.19.2.2.6.4.1.4 | ColumnibmMvsAtmSnaleMaxStations | read-only | current | The maximum number of connections (PUs) supported by an OSA for this port. This object is not supported for OSA-Express ATM so the value will be set to zero. |
| 1.3.6.1.4.1.2.6.19.2.2.6.4.1.5 | ColumnibmMvsAtmSnaLeMaxSaps | read-only | current | The maximum number of service access points (SAP) supported by an OSA for this for this port. This object is not supported for OSA-Express ATM so the value wil… |
| 1.3.6.1.4.1.2.6.19.2.2.6.4.1.6 | ColumnibmMvsAtmSnaleMaxIn | read-only | current | Maximum I frames before ACK (N3). The maximum number of I-format link protocol data units (LPDUs) that can be received by an OSA before it sends an acknowledge… |
| 1.3.6.1.4.1.2.6.19.2.2.6.4.1.7 | ColumnibmMvsAtmSnaLeMaxOut | read-only | current | SNA maximum transmit window (TW). The maximum number of outstanding I-format link protocol data units (LPDUs). It is also called the maximum transmit window co… |
| 1.3.6.1.4.1.2.6.19.2.2.6.4.1.8 | ColumnibmMvsAtmSnaLeCrsGroupAddress | read-only | current | This field contains the active Group Addresses. An individual Group Address is 6 bytes long. Therefore, this field is actually 32 times (OCTET STRING(SIZE(6)) … |
| 1.3.6.1.4.1.2.6.19.2.2.6.4.1.9 | ColumnibmMvsAtmSnaLeUserData | read-only | current | This field contains a character string of user data that can be used to further describe this port. |
| 1.3.6.1.4.1.2.6.19.2.2.6.4.1.10 | ColumnibmMvsAtmSnaLeClientEnableState | read-only | current | This object describes the state of the specified LAN Emulation Port. notDefined implies that the port is not defined in the configuration file. lecActivating i… |
| 1.3.6.1.4.1.2.6.19.2.2.6.4.1.11 | ColumnibmMvsAtmSnaLeBestEffortPeakRate | read-only | current | This object is the signaling parameter that should be used by the LEC when setting up all best effort VCCs. This parameter applies to the forward and backward … |
| 1.3.6.1.4.1.2.6.19.2.2.6.4.1.12 | ColumnibmMvsAtmSnaLeMaxLECConnections | read-only | current | This object specifies the maximum number of connections on an OSA port which can be used for LAN Emulation purposes. It can range from 0 to the number specifie… |
| 1.3.6.1.4.1.2.6.19.2.2.6.4.1.13 | ColumnibmMvsAtmSnaLeTrEnableLoadBalancing | read-only | current | Load balancing control used to enable the load balancing option. |
| 1.3.6.1.4.1.2.6.19.2.2.6.4.1.14 | ColumnibmMvsAtmSnaLeTrLoadBalancing | read-only | current | Load balancing factor. Specifies whether this port will be delayed and, if so, by how much time, in establishing a session. This factor is related to the numbe… |
| 1.3.6.1.4.1.2.6.19.2.2.6.4.1.15 | ColumnibmMvsAtmSnaLeTrSessionDelay | read-only | current | Session delay is specified to delay the response of this port to a new session request and by the specified length of time. By establishing a longer session de… |
| 1.3.6.1.4.1.2.6.19.2.2.6.5 | TableibmMvsAtmLecConfigTable | not-accessible | current | This table is intended to represent the data that is available from an OSA Port that is running LAN Emulation mode. An entry in this table is indexed by a LAN … |
| 1.3.6.1.4.1.2.6.19.2.2.6.5.1 | RowibmMvsAtmLecConfigEntry | not-accessible | current | Describes a particular ATM Lec Config Table entry, index by either a aflan802.3 or a aflane802.5 ifEntry's ifIndex. |
| 1.3.6.1.4.1.2.6.19.2.2.6.5.1.1 | ColumnibmMvsAtmLecConfigMode | read-only | current | Indicates whether this LAN Emulation Client should auto-configure the next time it is (re)started. In automatic (1) mode, a client uses a LAN Emulation Configu… |
| 1.3.6.1.4.1.2.6.19.2.2.6.5.1.2 | ColumnibmMvsAtmLecConfigLanType | read-only | current | The data frame format which this client will use the next time it returns to the Initial State. Auto-configuring clients use this parameter in their configure … |
| 1.3.6.1.4.1.2.6.19.2.2.6.5.1.3 | ColumnibmMvsAtmLecConfigMaxDataFrameSize | read-only | current | The maximum data frame size (in bytes) which this client will use the next time it returns to the Initial State. Auto-configuring clients use this parameter in… |
| 1.3.6.1.4.1.2.6.19.2.2.6.5.1.4 | ColumnibmMvsAtmLecConfigLanName | read-only | current | The ELAN Name this client will use the next time it returns to the Initial State. Auto-configuring clients use this parameter in their configure requests. Manu… |
| 1.3.6.1.4.1.2.6.19.2.2.6.5.1.5 | ColumnibmMvsAtmLecConfigLesAtmAddress | read-only | current | The LAN Emulation Server which this client will use the next time it is started in manual configuration mode. When lecConfigMode is 'automatic', there is no ne… |
| 1.3.6.1.4.1.2.6.19.2.2.6.5.1.6 | ColumnibmMvsAtmLecControlTimeout | read-only | current | Control Time-out. Time out period used for timing out most request/response control frame interactions, as specified elsewhere in the LAN Emulation specificati… |
| 1.3.6.1.4.1.2.6.19.2.2.6.5.1.7 | ColumnibmMvsAtmLecMaxUnknownFrameCount | read-only | current | Maximum Unknown Frame Count. See the description of lecMaxUnknownFrameTime below. Corresponds to Initial State Parameter C10. |
| 1.3.6.1.4.1.2.6.19.2.2.6.5.1.8 | ColumnibmMvsAtmLecMaxUnknownFrameTime | read-only | current | Maximum Unknown Frame Time. Within the period of time defined by the Maximum Unknown Frame Time, a LE Client will send no more than Maximum Unknown Frame Count… |
| 1.3.6.1.4.1.2.6.19.2.2.6.5.1.9 | ColumnibmMvsAtmLecVccTimeoutPeriod | read-only | current | VCC Time-out Period. A LE Client SHOULD release any Data Direct VCC that it has not used to transmit or receive any data frames for the length of the VCC Time-… |
| 1.3.6.1.4.1.2.6.19.2.2.6.5.1.10 | ColumnibmMvsAtmLecMaxRetryCount | read-only | current | Maximum Retry Count. A LE CLient MUST not retry a LE_ARP_REQUEST for a given frame's LAN destination more than Maximum Retry Count times, after the first LE_AR… |
| 1.3.6.1.4.1.2.6.19.2.2.6.5.1.11 | ColumnibmMvsAtmLecAgingTime | read-only | current | Aging Time. The maximum time that a LE Client will maintain an entry in its LE_ARP cache in the absence of a verification of that relationship. This time value… |
| 1.3.6.1.4.1.2.6.19.2.2.6.5.1.12 | ColumnibmMvsAtmLecForwardDelayTime | read-only | current | Forward Delay Time. The maximum time that a LE Client will maintain an entry for a non-local MAC address in its LE_ARP cache in the absence of a verification o… |
| 1.3.6.1.4.1.2.6.19.2.2.6.5.1.13 | ColumnibmMvsAtmLecExpectedArpResponseTime | read-only | current | Expected LE_ARP Reponse Time. The maximum time that the LEC expects an LE_ARP_REQUEST/LE_ARP_RESPONSE cycle to take. Used for retries and verifies. This time v… |
| 1.3.6.1.4.1.2.6.19.2.2.6.5.1.14 | ColumnibmMvsAtmLecFlushTimeout | read-only | current | Flush Time-out. Time limit to wait to receive a LE_FLUSH_RESPONSE after the LE_FLUSH_REQUEST has been sent before taking recovery action. This time value is ex… |
| 1.3.6.1.4.1.2.6.19.2.2.6.5.1.15 | ColumnibmMvsAtmLecPathSwitchingDelay | read-only | current | Path Switching Delay. The time since sending a frame to the BUS after which the LE Client may assume that the frame has been either discarded or delivered to t… |
| 1.3.6.1.4.1.2.6.19.2.2.6.5.1.16 | ColumnibmMvsAtmLecLocalSegmentID | read-only | current | Local Segment ID. The segment ID of the emulated LAN. This is only required for IEEE 802.5 clients that are Source Routing bridges. Corresponds to Initial Stat… |
| 1.3.6.1.4.1.2.6.19.2.2.6.5.1.17 | ColumnibmMvsAtmLecMulticastSendType | read-only | current | Multicast Send VCC Type. Signalling parameter that SHOULD be used by the LE Client when establishing the Multicast Send VCC. This is the method to be used by t… |
| 1.3.6.1.4.1.2.6.19.2.2.6.5.1.18 | ColumnibmMvsAtmLecMulticastSendAvgRate | read-only | current | Multicast Send VCC AvgRate. Signalling parameter that SHOULD be used by the LE Client when estabishing the Multicast Send VCC. Forward and Backward Sustained C… |
| 1.3.6.1.4.1.2.6.19.2.2.6.5.1.19 | ColumnibmMvsAtmLecMulticastSendPeakRate | read-only | current | Multicast Send VCC PeakRate. Signalling parameter that SHOULD be used by the LE Client when establishing the Multicast Send VCC. Forward and Backward Peak Cell… |
| 1.3.6.1.4.1.2.6.19.2.2.6.5.1.20 | ColumnibmMvsAtmLecConnectionCompleteTimer | read-only | current | Connection Complete Timer. Optional. In Connection Establish ment this is the time period in which data or a READY_IND message is expected from a Calling Party… |
| 1.3.6.1.4.1.2.6.19.2.2.6.5.1.21 | ColumnibmMvsAtmLecPortName | read-only | current | Specifies the Port Name for the logical port. This object only applies to OSA-Express ATM155 adapters configured for QDIO LAN Emulation mode. For ATM OSA-2 ada… |
| 1.3.6.1.4.1.2.6.19.2.2.6.6 | TableibmMvsAtmLecStatusTable | not-accessible | current | This table is intended to represent the data that is available from an OSA Port that is running LAN Emulation mode. An entry in this table is indexed by a LAN … |
| 1.3.6.1.4.1.2.6.19.2.2.6.6.1 | RowibmMvsAtmLecStatusEntry | not-accessible | current | Describes a particular ATM Lec Status Table entry, indexed by either a aflan802.3 or a aflane802.5 ifEntry's ifIndex. |
| 1.3.6.1.4.1.2.6.19.2.2.6.6.1.1 | ColumnibmMvsAtmLecPrimaryAtmAddress | read-only | current | LE Client's ATM Addresses. The primary ATM address of this LAN Emulation Client. This address is used to establish the Control Direct and Multicast Send VCCs, … |
| 1.3.6.1.4.1.2.6.19.2.2.6.6.1.2 | ColumnibmMvsAtmLecID | read-only | current | LE Client Identifier. Each LE Client requires a LE Client Identifier (LECID) assigned by the LE Server during the Join phase. The LECID is placed in control re… |
| 1.3.6.1.4.1.2.6.19.2.2.6.6.1.3 | ColumnibmMvsAtmLecInterfaceState | read-only | current | The current state of the LAN Emulation Client. Note that 'ifOperStatus' is defined to be 'up' when, and only when, lecInterfaceState' is 'operational'. |
| 1.3.6.1.4.1.2.6.19.2.2.6.6.1.4 | ColumnibmMvsAtmLecLastFailureRespCode | read-only | current | Status code from the last failed Configure response or Join response. Failed responses are those for which the LE_CONFIGURE_RESPONSE / LE_JOIN_RESPONSE frame c… |
| 1.3.6.1.4.1.2.6.19.2.2.6.6.1.5 | ColumnibmMvsAtmLecLastFailureState | read-only | current | The state this client was in when it updated the 'lecLastFailureRespCode'. If 'lecLastFailureRespCode' is 'none', this object has the value initialState(1). |
| 1.3.6.1.4.1.2.6.19.2.2.6.6.1.6 | ColumnibmMvsAtmLecProtocol | read-only | current | The LAN Emulation protocol which this client supports, and specifies in its LE_JOIN_REQUESTs. |
| 1.3.6.1.4.1.2.6.19.2.2.6.6.1.7 | ColumnibmMvsAtmLecVersion | read-only | current | The LAN Emulation protocol version which this client supports, and specifies in its LE_JOIN_REQUESTs. |
| 1.3.6.1.4.1.2.6.19.2.2.6.6.1.8 | ColumnibmMvsAtmLecTopologyChange | read-only | current | Topology Change. Boolean indication that the LE Client is using the Forward Delay Time C18, instead of the Aging Time C17, to age non-local entries in its LE_A… |
| 1.3.6.1.4.1.2.6.19.2.2.6.6.1.9 | ColumnibmMvsAtmLecConfigServerAtmAddress | read-only | current | The ATM address of the LAN Emulation Configuration Server (if known) or the 0 (otherwise). In LAN Emulation MIB, the OCTET STRING is either 0 length or 20 octe… |
| 1.3.6.1.4.1.2.6.19.2.2.6.6.1.10 | ColumnibmMvsAtmLecConfigSource | read-only | current | Indicates whether this LAN Emulation Client used the LAN Emulation Configuration Server, and, if so, what method it used to establish the Configuration Direct … |
| 1.3.6.1.4.1.2.6.19.2.2.6.6.1.11 | ColumnibmMvsAtmLecActualLanType | read-only | current | The data frame format that this LAN Emulation Client is using right now. This may come from lecConfigLanType, the LAN Emulation Configuration Server, or the LA… |
| 1.3.6.1.4.1.2.6.19.2.2.6.6.1.12 | ColumnibmMvsAtmLecActualMaxDataFrameSize | read-only | current | Maximum Data Frame Size. The maximum data frame size that this LAN Emulation client is using right now. This may come from lecConfigMaxDataFrameSize, the LAN E… |
| 1.3.6.1.4.1.2.6.19.2.2.6.6.1.13 | ColumnibmMvsAtmLecActualLanName | read-only | current | ELAN Name. The identity of the emulated LAN which this client last joined, or wishes to join. This may come from lecConfigLanName, the LAN Emulation Configurat… |
| 1.3.6.1.4.1.2.6.19.2.2.6.6.1.14 | ColumnibmMvsAtmLecAtmAddress | read-only | current | LE Server ATM Address. The LAN Emulation Server address currently in use or most recently attempted. If no LAN Emulation Server attachment has been tried, this… |
| 1.3.6.1.4.1.2.6.19.2.2.6.6.1.15 | ColumnibmMvsAtmLecProxyClient | read-only | current | Indicates whether this client is acting as a proxy. Proxy clients are allowed to represent unregistered MAC addresses, and receive copies of LE_ARP_REQUEST fra… |
| 1.3.6.1.4.1.2.6.19.2.2.6.7 | TableibmMvsAtmLecStatisticsTable | not-accessible | current | This table is intended to represent the data that is available from an OSA Port that is running LAN Emulation mode. An entry in this table is indexed by a LAN … |
| 1.3.6.1.4.1.2.6.19.2.2.6.7.1 | RowibmMvsAtmLecStatisticsEntry | not-accessible | current | Describes a particular ATM Lec Statistics Table entry, indexed by either a aflan802.3 or a aflane802.5 ifEntry's ifIndex. |
| 1.3.6.1.4.1.2.6.19.2.2.6.7.1.1 | ColumnibmMvsAtmLecArpRequestsOut | read-only | current | The number of LE_ARP_REQUESTs sent over the LUNI by this LAN Emulation Client. |
| 1.3.6.1.4.1.2.6.19.2.2.6.7.1.2 | ColumnibmMvsAtmLecArpRequestsIn | read-only | current | The number of LE_ARP_REQUESTs received over the LUNI by this LAN Emulation Client. Requests may arrive on the Control Direct VCC or on the Control Distribute V… |
| 1.3.6.1.4.1.2.6.19.2.2.6.7.1.3 | ColumnibmMvsAtmLecArpRepliesOut | read-only | current | The number of LE_ARP_RESPONSEs sent over the LUNI by this LAN Emulation Client. |
| 1.3.6.1.4.1.2.6.19.2.2.6.7.1.4 | ColumnibmMvsAtmLecArpRepliesIn | read-only | current | The number of LE_ARP_RESPONSEs received over the LUNI by this LAN Emulation Client. This count includes all such replies, whether solicited or not. Replies may… |
| 1.3.6.1.4.1.2.6.19.2.2.6.7.1.5 | ColumnibmMvsAtmLecControlFramesOut | read-only | current | The total number of control packets sent by this LAN Emulation Client over the LUNI. |
| 1.3.6.1.4.1.2.6.19.2.2.6.7.1.6 | ColumnibmMvsAtmLecControlFramesIn | read-only | current | The total number of control packets received by this LAN Emulation Client over the LUNI. |
| 1.3.6.1.4.1.2.6.19.2.2.6.7.1.7 | ColumnibmMvsAtmLecSvcFailures | read-only | current | The total number of outgoing LAN Emulation SVCs which this client tried, but failed, to open; incoming LAN Emulation SVCs which this client tried, but failed t… |
| 1.3.6.1.4.1.2.6.19.2.2.6.8 | TableibmMvsAtmLecServerTable | not-accessible | current | This table is intended to represent the data that is available from an OSA Port that is running LAN Emulation mode. An entry in this table is indexed by a LAN … |
| 1.3.6.1.4.1.2.6.19.2.2.6.8.1 | RowibmMvsAtmLecServerEntry | not-accessible | current | Describes a particular ATM Lec Server Table entry, indexed by either a aflan802.3 or a aflane802.5 ifEntry's ifIndex. |
| 1.3.6.1.4.1.2.6.19.2.2.6.8.1.1 | ColumnibmMvsAtmLecConfigDirectInterface | read-only | current | The interface associated with the Configuration Direct VCC. If no Configuration Direct VCC exists, this object has the value 0. Otherwise, the objects ( lecCon… |
| 1.3.6.1.4.1.2.6.19.2.2.6.8.1.2 | ColumnibmMvsAtmLecConfigDirectVPI | read-only | current | If the Configuration Direct VCC exists, this object contains the VPI which identifies that VCC at the point where it connects to this LE client. Otherwise, thi… |
| 1.3.6.1.4.1.2.6.19.2.2.6.8.1.3 | ColumnibmMvsAtmLecConfigDirectVCI | read-only | current | If the Configuration Direct VCC exists, this object contains the VCI which identifies that VCC at the point where it connects to this LE client. Otherwise, thi… |
| 1.3.6.1.4.1.2.6.19.2.2.6.8.1.4 | ColumnibmMvsAtmLecControlDirectInterface | read-only | current | The interface associated with the Control Direct VCC. If no Control Direct VCC exists, this object has the value 0. Otherwise, the objects ( lecControlDirectIn… |
| 1.3.6.1.4.1.2.6.19.2.2.6.8.1.5 | ColumnibmMvsAtmLecControlDirectVPI | read-only | current | If the Control Direct VCC exists, this object contains the VPI which identifies that VCC at the point where it connects to this LE client. Otherwise, this obje… |
| 1.3.6.1.4.1.2.6.19.2.2.6.8.1.6 | ColumnibmMvsAtmLecControlDirectVCI | read-only | current | If the Control Direct VCC exists, this object contains the VCI which identifies that VCC at the point where it connects to this LE client. Otherwise, this obje… |
| 1.3.6.1.4.1.2.6.19.2.2.6.8.1.7 | ColumnibmMvsAtmLecControlDistributeInterface | read-only | current | The interface associated with the Control Distribute VCC. If no Control Distribute VCC has been set up to this client, this object has the value 0. Otherwise, … |
| 1.3.6.1.4.1.2.6.19.2.2.6.8.1.8 | ColumnibmMvsAtmLecControlDistributeVPI | read-only | current | If the Control Distribute VCC exists, this object contains the VPI which identifies that VCC at the point where it connects to this LE client. Otherwise, this … |
| 1.3.6.1.4.1.2.6.19.2.2.6.8.1.9 | ColumnibmMvsAtmLecControlDistributeVCI | read-only | current | If the Control Distribute VCC exists, this object contains the VCI which identifies that VCC at the point where it connects to this LE client. Otherwise, this … |
| 1.3.6.1.4.1.2.6.19.2.2.6.8.1.10 | ColumnibmMvsAtmLecMulticastSendInterface | read-only | current | The interface associated with the Multicast Send VCC. If no Multicast Send VCC exists, this object has the value 0. Otherwise, the objects ( lecMulticastSendIn… |
| 1.3.6.1.4.1.2.6.19.2.2.6.8.1.11 | ColumnibmMvsAtmLecMulticastSendVPI | read-only | current | If the Multicast Send VCC exists, this object contains the VPI which identifies that VCC at the point where it connects to this LE client. Otherwise, this obje… |
| 1.3.6.1.4.1.2.6.19.2.2.6.8.1.12 | ColumnibmMvsAtmLecMulticastSendVCI | read-only | current | If the Multicast Send VCC exists, this object contains the VCI which identifies that VCC at the point where it connects to this LE client. Otherwise, this obje… |
| 1.3.6.1.4.1.2.6.19.2.2.6.8.1.13 | ColumnibmMvsAtmLecMulticastFwdInterface | read-only | current | The interface associated with the Multicast Forward VCC. If no Multicast Forward VCC has been set up to this client, this object has the value 0. Otherwise, th… |
| 1.3.6.1.4.1.2.6.19.2.2.6.8.1.14 | ColumnibmMvsAtmLecMulticastFwdVPI | read-only | current | If the Multicast Forward VCC exists, this object contains the VPI which identifies that VCC at the point where it connects to this LE client. Otherwise, this o… |
| 1.3.6.1.4.1.2.6.19.2.2.6.8.1.15 | ColumnibmMvsAtmLecMulticastFwdVCI | read-only | current | If the Multicast Forward VCC exists, this object contains the VCI which identifies that VCC at the point where it connects to this LE client. Otherwise, this o… |
| 1.3.6.1.4.1.2.6.19.2.2.6.9 | TableibmMvsAtmLecMacAddressTable | not-accessible | current | This table is intended to represent the data that is available from an OSA Port that is running LAN Emulation mode. An entry in this table is indexed by a LAN … |
| 1.3.6.1.4.1.2.6.19.2.2.6.9.1 | RowibmMvsAtmLecMacAddressEntry | not-accessible | current | Describes a particular ATM Lec Mac Address Table entry, indexed by either a aflan802.3 or a aflane802.5 ifEntry's ifIndex. |
| 1.3.6.1.4.1.2.6.19.2.2.6.9.1.1 | ColumnibmMvsAtmLecMacAddress | read-only | current | A unicast MAC address which the LE client denoted by 'lecIndex' has registered with its LE Server. This value is expressed in canonical form for Ethernet. |
| 1.3.6.1.4.1.2.6.19.2.2.7 | NodeibmTcpipMvsTcpGroup | |||
| 1.3.6.1.4.1.2.6.19.2.2.7.1 | TableibmTcpipMvsTcpConnTable | not-accessible | current | Extends tcpConnTable to provide additional TCP connection information. |
| 1.3.6.1.4.1.2.6.19.2.2.7.1.1 | RowibmTcpipMvsTcpConnEntry | not-accessible | current | Descibes a particular tcp connection entry. |
| 1.3.6.1.4.1.2.6.19.2.2.7.1.1.1 | ColumnibmMvsTcpConnLastActivity | read-only | current | The number of 100ths of seconds since this entry was last used. |
| 1.3.6.1.4.1.2.6.19.2.2.7.1.1.2 | ColumnibmMvsTcpConnBytesIn | read-only | current | The number of bytes received from IP for this connection. |
| 1.3.6.1.4.1.2.6.19.2.2.7.1.1.3 | ColumnibmMvsTcpConnBytesOut | read-only | current | The number of bytes sent to IP for this connection. |
| 1.3.6.1.4.1.2.6.19.2.2.7.1.1.4 | ColumnibmMvsTcpConnActiveOpen | read-only | obsolete | The number of times that this connection has made a direct transition to the SYN-RCVD state from the listen state. |
| 1.3.6.1.4.1.2.6.19.2.2.7.1.1.5 | ColumnibmMvsTcpConnIpTos | read-only | obsolete | Type of Service (tos) in effect for this tcpConnTable entry. Currently not supported and should return a zero. |
| 1.3.6.1.4.1.2.6.19.2.2.7.1.1.6 | ColumnibmMvsTcpConnOptions | read-only | current | IP options (see RFC 791) |
| 1.3.6.1.4.1.2.6.19.2.2.7.1.1.7 | ColumnibmMvsTcpConnOutBuffered | read-only | current | Number of outgoing bytes buffered |
| 1.3.6.1.4.1.2.6.19.2.2.7.1.1.8 | ColumnibmMvsTcpConnUsrSndNxt | read-only | current | Sequence number of next byte for user |
| 1.3.6.1.4.1.2.6.19.2.2.7.1.1.9 | ColumnibmMvsTcpConnSndNxt | read-only | current | Sequence number of next byte for TCP |
| 1.3.6.1.4.1.2.6.19.2.2.7.1.1.10 | ColumnibmMvsTcpConnSndUna | read-only | current | Sequence number of sent/unacked byte |
| 1.3.6.1.4.1.2.6.19.2.2.7.1.1.11 | ColumnibmMvsTcpConnOutgoingPush | read-only | current | Sequence number of last pushed byte |
| 1.3.6.1.4.1.2.6.19.2.2.7.1.1.12 | ColumnibmMvsTcpConnOutgoingUrg | read-only | current | Sequence number of last urg byte |
| 1.3.6.1.4.1.2.6.19.2.2.7.1.1.13 | ColumnibmMvsTcpConnOutgoingWinSeq | read-only | current | Last sequence number in snd window |
| 1.3.6.1.4.1.2.6.19.2.2.7.1.1.14 | ColumnibmMvsTcpConnSendWindowSeq | read-only | obsolete | Last sequence number used, win update |
| 1.3.6.1.4.1.2.6.19.2.2.7.1.1.15 | ColumnibmMvsTcpConnSendWindowAck | read-only | obsolete | Last Ack number used, win update |
| 1.3.6.1.4.1.2.6.19.2.2.7.1.1.16 | ColumnibmMvsTcpConnInBuffered | read-only | current | Number of incoming bytes buffered |
| 1.3.6.1.4.1.2.6.19.2.2.7.1.1.17 | ColumnibmMvsTcpConnRcvNxt | read-only | current | Sequence number of next byte for TCP |
| 1.3.6.1.4.1.2.6.19.2.2.7.1.1.18 | ColumnibmMvsTcpConnUsrRcvNxt | read-only | current | Sequence number of next byte for user |
| 1.3.6.1.4.1.2.6.19.2.2.7.1.1.19 | ColumnibmMvsTcpConnIncomingPush | read-only | current | Sequence number of last pushed byte |
| 1.3.6.1.4.1.2.6.19.2.2.7.1.1.20 | ColumnibmMvsTcpConnIncomingUrg | read-only | current | Sequence number of 'urgent' byte received |
| 1.3.6.1.4.1.2.6.19.2.2.7.1.1.21 | ColumnibmMvsTcpConnIncomingWinSeq | read-only | current | Last sequence number in receive window |
| 1.3.6.1.4.1.2.6.19.2.2.7.1.1.22 | ColumnibmMvsTcpConnReXmt | read-only | current | Total number of retransmissions for this connection. |
| 1.3.6.1.4.1.2.6.19.2.2.7.1.1.23 | ColumnibmMvsTcpConnMaxSndWnd | read-only | current | Maximum send window seen |
| 1.3.6.1.4.1.2.6.19.2.2.7.1.1.24 | ColumnibmMvsTcpConnReXmtCount | read-only | current | Number of times the current segment has been retransmitted. |
| 1.3.6.1.4.1.2.6.19.2.2.7.1.1.25 | ColumnibmMvsTcpConnCongestionWnd | read-only | current | Congestion window |
| 1.3.6.1.4.1.2.6.19.2.2.7.1.1.26 | ColumnibmMvsTcpConnSSThresh | read-only | current | Slow start threshold |
| 1.3.6.1.4.1.2.6.19.2.2.7.1.1.27 | ColumnibmMvsTcpConnRoundTripTime | read-only | current | The amount of time that has elapsed, measured in milliseconds, from when the last TCP segment was transmitted by the TCP Stack until the ACK was received. |
| 1.3.6.1.4.1.2.6.19.2.2.7.1.1.28 | ColumnibmMvsTcpConnRoundTripVariance | read-only | current | Round trip time variance. |
| 1.3.6.1.4.1.2.6.19.2.2.7.1.1.29 | ColumnibmMvsTcpConnInitSndSeq | read-only | current | Initial Send Sequence Number |
| 1.3.6.1.4.1.2.6.19.2.2.7.1.1.30 | ColumnibmMvsTcpConnInitRcvSeq | read-only | current | Initial Receive Sequence Number |
| 1.3.6.1.4.1.2.6.19.2.2.7.1.1.31 | ColumnibmMvsTcpConnSendMSS | read-only | current | Maximum Segment Size we can send |
| 1.3.6.1.4.1.2.6.19.2.2.7.1.1.32 | ColumnibmMvsTcpConnSndWl1 | read-only | current | Sequence of last window |
| 1.3.6.1.4.1.2.6.19.2.2.7.1.1.33 | ColumnibmMvsTcpConnSndWl2 | read-only | current | Ack of last window |
| 1.3.6.1.4.1.2.6.19.2.2.7.1.1.34 | ColumnibmMvsTcpConnSndWnd | read-only | current | Send Window size |
| 1.3.6.1.4.1.2.6.19.2.2.7.1.1.35 | ColumnibmMvsTcpConnPendTcpRecv | read-only | obsolete | TCP non_block read flag |
| 1.3.6.1.4.1.2.6.19.2.2.7.1.1.36 | ColumnibmMvsTcpConnRcvBufSize | read-only | current | Receive buffer size |
| 1.3.6.1.4.1.2.6.19.2.2.7.1.1.37 | ColumnibmMvsTcpConnResourceName | read-only | current | Resource Name is the text identification of this resource. It represents the user who opened the socket and is updated again during the bind processing. |
| 1.3.6.1.4.1.2.6.19.2.2.7.1.1.38 | ColumnibmMvsTcpConnSubtask | read-only | current | The subtask ID represents the task that opened the socket and is updated again during bind processing. It is actually the TCB address. |
| 1.3.6.1.4.1.2.6.19.2.2.7.1.1.39 | ColumnibmMvsTcpConnResourceId | read-only | current | Resource ID is the numeric identification of this resource. |
| 1.3.6.1.4.1.2.6.19.2.2.7.1.1.40 | ColumnibmMvsTcpConnSockOpt | read-only | current | flag for socket options (1 byte hex value) -bit(1) = Sockets SO_REUSEADDR option -bit(2) = SO_OOBINLINE option -bit(3) = SO_LINGER option -bit(4) = T_MSGDONTRO… |
| 1.3.6.1.4.1.2.6.19.2.2.7.1.1.41 | ColumnibmMvsTcpConnTcpTimer | read-only | obsolete | flag for TCP timers (1 byte hex value) -bit(1) = Currently timing round trip -bit(2) = Currently timing rexmt -bit(3) = Currently timing window probe -bit(4) =… |
| 1.3.6.1.4.1.2.6.19.2.2.7.1.1.42 | ColumnibmMvsTcpConnTcpSig | read-only | obsolete | 1 byte hex flag for TCP signals -bit(1) = Signal urgent data -bit(2) = Signal normal data -bit(3) = Signal timing finwait2 -bit(4) = <reserved> -bit(5) = <rese… |
| 1.3.6.1.4.1.2.6.19.2.2.7.1.1.43 | ColumnibmMvsTcpConnTcpSel | read-only | obsolete | TCP select flag byte for TCP select conditions. It is mapped as follows: -bit(1) = ON if active open, off passive -bit(2) = ON means timestamp option supported… |
| 1.3.6.1.4.1.2.6.19.2.2.7.1.1.44 | ColumnibmMvsTcpConnRttSeq | read-only | current | 4 byte value for the TCP sequence number |
| 1.3.6.1.4.1.2.6.19.2.2.7.1.1.45 | ColumnibmMvsTcpConnBackoffCount | read-only | obsolete | The value of this object will always be zero since it currently isn't reported. |
| 1.3.6.1.4.1.2.6.19.2.2.7.1.1.46 | ColumnibmMvsTcpConnTcpDet | read-only | obsolete | This flag will hold special TCP protocol conditions: - bit(1) = Delay Acks requested on PORT/PORTRANGE - bit(2) = Delay Acks requested on GATEWAY - bit(3) = Us… |
| 1.3.6.1.4.1.2.6.19.2.2.7.1.1.47 | ColumnibmMvsTcpConnTcpPol | read-only | obsolete | This flag will indicates the following TCP poll conditions: - bit(1) = High priority data received - bit(2) = <reserved> - bit(3) = Written Normal - bit(4) = <… |
| 1.3.6.1.4.1.2.6.19.2.2.7.1.1.48 | ColumnibmMvsTcpConnTargetAppl | read-only | current | When the corresponding TCP connection is for a 3172 Telnet session then this object contains the Target VTAM Application name. |
| 1.3.6.1.4.1.2.6.19.2.2.7.1.1.49 | ColumnibmMvsTcpConnLuName | read-only | current | When the corresponding TCP connection is for a 3172 Telnet session then this object contains the VTAM LU name. |
| 1.3.6.1.4.1.2.6.19.2.2.7.1.1.50 | ColumnibmMvsTcpConnClientUserId | read-only | current | When the corresponding TCP connection is for a 3172 Telnet session then this object contains the Client's userid. |
| 1.3.6.1.4.1.2.6.19.2.2.7.1.1.51 | ColumnibmMvsTcpConnLogMode | read-only | current | When the corresponding TCP connection is for a 3172 Telnet session then this object contains the LOG Mode. |
| 1.3.6.1.4.1.2.6.19.2.2.7.1.1.52 | ColumnibmMvsTcpConnProto | read-only | current | This flag will indicates the following Telnet modes: -bit(1 - 5) = <reserved> -bit(6) = TN3270 mode -bit(7) = TN3270E mode -bit(8) = line mode |
| 1.3.6.1.4.1.2.6.19.2.2.7.1.1.53 | ColumnibmMvsTcpConnDupacks | read-only | current | Number of duplicate ACKs received for this connection. |
| 1.3.6.1.4.1.2.6.19.2.2.7.1.1.54 | ColumnibmMvsTcpConnOptMaxSegmentSize | read-only | current | Optimal maximum segment size. The range of this value is from 0 to 65535. |
| 1.3.6.1.4.1.2.6.19.2.2.7.1.1.55 | ColumnibmMvsTcpConnClusterConnFlag | read-only | current | This flag contains sysplex cluster connection types for this connection: -bit(1) = getsockopt(clusterconntype) requested -bit(2 - 4) = <reserved> -bit(5) = clu… |
| 1.3.6.1.4.1.2.6.19.2.2.7.1.1.56 | ColumnibmMvsTcpConnInSegs | read-only | current | The number of segments received from IP for this connection. |
| 1.3.6.1.4.1.2.6.19.2.2.7.1.1.57 | ColumnibmMvsTcpConnOutSegs | read-only | current | The number of segments sent to IP for this connection. |
| 1.3.6.1.4.1.2.6.19.2.2.7.1.1.58 | ColumnibmMvsTcpConnDSField | read-only | current | The Differentiated Services field value in effect for this tcpConnTable entry. The value may be one of the following: - If there is a Service Policy Agent poli… |
| 1.3.6.1.4.1.2.6.19.2.2.7.1.1.59 | ColumnibmMvsTcpConnSndBufSize | read-only | current | Send buffer size |
| 1.3.6.1.4.1.2.6.19.2.2.7.1.1.60 | ColumnibmMvsTcpConnAcceptCount | read-only | current | The total number of connections accepted by this listener. Applies only to listener entries. |
| 1.3.6.1.4.1.2.6.19.2.2.7.1.1.61 | ColumnibmMvsTcpConnExceedBacklog | read-only | current | The total number of connections dropped by this listener due to backlog exceeded. Applies only to listener entries. |
| 1.3.6.1.4.1.2.6.19.2.2.7.1.1.62 | ColumnibmMvsTcpConnCurrBacklog | read-only | current | The current number of connections in backlog. Applies only to listener entries. |
| 1.3.6.1.4.1.2.6.19.2.2.7.1.1.63 | ColumnibmMvsTcpConnMaxBacklog | read-only | current | The maximum number of connections allowed in backlog at one time. Applies only to listener entries. |
| 1.3.6.1.4.1.2.6.19.2.2.7.1.1.64 | ColumnibmMvsTcpConnWindowScale | read-only | current | If true(1), the TCP window scale option is active for this connection. If false(2), the TCP window scale option is not active. |
| 1.3.6.1.4.1.2.6.19.2.2.7.1.1.65 | ColumnibmMvsTcpConnTimeStamp | read-only | current | If true(1), the TCP timestamp option is active for this connection. If false(2), the TCP timestamp option is not active. |
| 1.3.6.1.4.1.2.6.19.2.2.7.1.1.66 | ColumnibmMvsTcpConnServerResourceId | read-only | current | The numeric identification of the server (i.e. listener connection) associated with this client connection. This value only applies to load balancing servers w… |
| 1.3.6.1.4.1.2.6.19.2.2.7.2 | ScalaribmMvsTcpConnsClosed | read-only | current | Number of TCP connections that have corresponding sockets closed. |
| 1.3.6.1.4.1.2.6.19.2.2.7.3 | ScalaribmMvsTcpPassiveDrops | read-only | current | Number of passive connection requests discarded. |
| 1.3.6.1.4.1.2.6.19.2.2.7.4 | ScalaribmMvsTcpTimeWaitReused | read-only | current | Number of TCP connections in the TIMEWAIT state that have been reused for connections in the SYN-RCVD state. |
| 1.3.6.1.4.1.2.6.19.2.2.7.5 | ScalaribmMvsTcpPredictAck | read-only | current | Number of inbound TCP acknowledgements with successful header prediction. |
| 1.3.6.1.4.1.2.6.19.2.2.7.6 | ScalaribmMvsTcpPredictData | read-only | current | Number of inbound TCP data segments with successful header prediction. |
| 1.3.6.1.4.1.2.6.19.2.2.7.7 | ScalaribmMvsTcpInDupAck | read-only | current | Number of inbound duplicate TCP acknowledgements. |
| 1.3.6.1.4.1.2.6.19.2.2.7.8 | ScalaribmMvsTcpInBadSum | read-only | current | Number of inbound TCP segments discarded due to bad checksum. |
| 1.3.6.1.4.1.2.6.19.2.2.7.9 | ScalaribmMvsTcpInBadLen | read-only | current | Number of inbound TCP segments discarded due to bad header len. |
| 1.3.6.1.4.1.2.6.19.2.2.7.10 | ScalaribmMvsTcpInShort | read-only | current | Number of inbound TCP data segments discarded due to data length shorter than segment length. |
| 1.3.6.1.4.1.2.6.19.2.2.7.11 | ScalaribmMvsTcpInPawsDrop | read-only | current | Number of inbound TCP data segments discarded due to old timestamp. |
| 1.3.6.1.4.1.2.6.19.2.2.7.12 | ScalaribmMvsTcpInAllBeforeWin | read-only | current | Number of inbound TCP data segments with all data before current TCP window. |
| 1.3.6.1.4.1.2.6.19.2.2.7.13 | ScalaribmMvsTcpInSomeBeforeWin | read-only | current | Number of inbound TCP data segments with some data before current TCP window. |
| 1.3.6.1.4.1.2.6.19.2.2.7.14 | ScalaribmMvsTcpInAllAfterWin | read-only | current | Number of inbound TCP data segments with all data after current TCP window. |
| 1.3.6.1.4.1.2.6.19.2.2.7.15 | ScalaribmMvsTcpInSomeAfterWin | read-only | current | Number of inbound TCP data segments with some data after current TCP window. |
| 1.3.6.1.4.1.2.6.19.2.2.7.16 | ScalaribmMvsTcpInOutOfOrder | read-only | current | Number of inbound TCP data segments that did not contain the next expected sequence number (ie. out-of-order). |
| 1.3.6.1.4.1.2.6.19.2.2.7.17 | ScalaribmMvsTcpInAfterClose | read-only | current | Number of inbound TCP data segments received after corresponding sockets have been closed. |
| 1.3.6.1.4.1.2.6.19.2.2.7.18 | ScalaribmMvsTcpInWinProbes | read-only | current | Number of inbound TCP segments processed while current receive window size is zero. |
| 1.3.6.1.4.1.2.6.19.2.2.7.19 | ScalaribmMvsTcpInWinUpdates | read-only | current | Number of inbound TCP segments that only change receive window size. |
| 1.3.6.1.4.1.2.6.19.2.2.7.20 | ScalaribmMvsTcpOutWinUpdates | read-only | current | Number of outbound TCP segments that only change receive window size. |
| 1.3.6.1.4.1.2.6.19.2.2.7.21 | ScalaribmMvsTcpOutDelayAcks | read-only | current | Number of delayed outbound TCP acknowledgements. |
| 1.3.6.1.4.1.2.6.19.2.2.7.22 | ScalaribmMvsTcpOutWinProbes | read-only | current | Number of outbound window probe requests. |
| 1.3.6.1.4.1.2.6.19.2.2.7.23 | ScalaribmMvsTcpRxmtTimers | read-only | current | Number of TCP retransmit timer pops. |
| 1.3.6.1.4.1.2.6.19.2.2.7.24 | ScalaribmMvsTcpRxmtDrops | read-only | current | Number of TCP connections dropped due to retransmit threshold exceeded. |
| 1.3.6.1.4.1.2.6.19.2.2.7.25 | ScalaribmMvsTcpPMTURxmts | read-only | current | Number of outbound TCP segments retransmitted due to path MTU discovery. |
| 1.3.6.1.4.1.2.6.19.2.2.7.26 | ScalaribmMvsTcpPMTUErrors | read-only | current | Number of TCP connections that exceeded path MTU discovery retransmit threshold. |
| 1.3.6.1.4.1.2.6.19.2.2.7.27 | ScalaribmMvsTcpProbeDrops | read-only | current | Number of TCP connections dropped due to no response while sending window probe requests. |
| 1.3.6.1.4.1.2.6.19.2.2.7.28 | ScalaribmMvsTcpKeepAliveProbes | read-only | current | Number of keepalive probe requests. |
| 1.3.6.1.4.1.2.6.19.2.2.7.29 | ScalaribmMvsTcpKeepAliveDrops | read-only | current | Number of TCP connections dropped due to no response while sending keepalive probe requests. |
| 1.3.6.1.4.1.2.6.19.2.2.7.30 | ScalaribmMvsTcpFinwait2Drops | read-only | current | Number of TCP connections dropped due to FINWAIT2 timer expiring prior to receiving FIN segment. |
| 1.3.6.1.4.1.2.6.19.2.2.7.31 | TableibmTcpipMvsTcpListenerTable | not-accessible | current | Provides TCP connection information for connections in Listen state. Connections in this state are assumed to be servers so only server MIB objects are support… |
| 1.3.6.1.4.1.2.6.19.2.2.7.31.1 | RowibmTcpipMvsTcpListenerEntry | not-accessible | current | Descibes a particular tcp listener entry. |
| 1.3.6.1.4.1.2.6.19.2.2.7.31.1.1 | ColumnibmMvsTcpListenerResourceId | not-accessible | current | Resource ID is the numeric identification of this resource. This value is also known as the connection ID. |
| 1.3.6.1.4.1.2.6.19.2.2.7.31.1.2 | ColumnibmMvsTcpListenerLocalAddrType | read-only | current | The IP address type of the ibmMvsTcpListenerLocalAddr object. |
| 1.3.6.1.4.1.2.6.19.2.2.7.31.1.3 | ColumnibmMvsTcpListenerLocalAddr | read-only | current | The local IP address for this TCP connection. In the case of a connection in the listen state which is willing to accept connections for any IP interface assoc… |
| 1.3.6.1.4.1.2.6.19.2.2.7.31.1.4 | ColumnibmMvsTcpListenerLocalPort | read-only | current | The local port number for this TCP connection. |
| 1.3.6.1.4.1.2.6.19.2.2.7.31.1.5 | ColumnibmMvsTcpListenerRemoteAddrType | read-only | current | The IP address type of the ibmMvsTcpListenerRemoteAddr object. |
| 1.3.6.1.4.1.2.6.19.2.2.7.31.1.6 | ColumnibmMvsTcpListenerRemoteAddr | read-only | current | The remote ip address for this TCP connection. |
| 1.3.6.1.4.1.2.6.19.2.2.7.31.1.7 | ColumnibmMvsTcpListenerRemotePort | read-only | current | The remote port number for this TCP connection. |
| 1.3.6.1.4.1.2.6.19.2.2.7.31.1.8 | ColumnibmMvsTcpListenerAcceptCount | read-only | current | The total number of connections accepted by this listener. |
| 1.3.6.1.4.1.2.6.19.2.2.7.31.1.9 | ColumnibmMvsTcpListenerExceedBacklog | read-only | current | The total number of connections dropped by this listener due to backlog exceeded. |
| 1.3.6.1.4.1.2.6.19.2.2.7.31.1.10 | ColumnibmMvsTcpListenerCurrBacklog | read-only | current | The current number of connections in backlog. |
| 1.3.6.1.4.1.2.6.19.2.2.7.31.1.11 | ColumnibmMvsTcpListenerMaxBacklog | read-only | current | The maximum number of connections allowed in backlog at one time. |
| 1.3.6.1.4.1.2.6.19.2.2.7.31.1.12 | ColumnibmMvsTcpListenerResourceName | read-only | current | Resource Name is the text identification of this resource. It represents the user who opened the socket and is updated again during the bind processing. |
| 1.3.6.1.4.1.2.6.19.2.2.8 | NodeibmTcpipMvsUdpGroup | |||
| 1.3.6.1.4.1.2.6.19.2.2.8.1 | TableibmTcpipMvsUdpTable | not-accessible | current | Extends udp table to support additional UDP listener information. |
| 1.3.6.1.4.1.2.6.19.2.2.8.1.1 | RowibmTcpipMvsUdpEntry | not-accessible | current | Descibes a particular udp entry. |
| 1.3.6.1.4.1.2.6.19.2.2.8.1.1.1 | ColumnibmMvsUdpLastAct | read-only | current | The amount of time that has elapsed since the corresponding entry has had any activity. Measured in hundreds of seconds. |
| 1.3.6.1.4.1.2.6.19.2.2.8.1.1.2 | ColumnibmMvsUdpTos | read-only | obsolete | The type of service in effect for this entry. Currently, not supported and will return a zero when retrieved. |
| 1.3.6.1.4.1.2.6.19.2.2.8.1.1.3 | ColumnibmMvsUdpIpOpts | read-only | current | IP Options (see RFC 791) |
| 1.3.6.1.4.1.2.6.19.2.2.8.1.1.4 | ColumnibmMvsUdpDgramIn | read-only | current | Number of received datagrams. |
| 1.3.6.1.4.1.2.6.19.2.2.8.1.1.5 | ColumnibmMvsUdpBytesIn | read-only | current | Number of bytes received. |
| 1.3.6.1.4.1.2.6.19.2.2.8.1.1.6 | ColumnibmMvsUdpDgramOut | read-only | current | Number of send datagrams. |
| 1.3.6.1.4.1.2.6.19.2.2.8.1.1.7 | ColumnibmMvsUdpBytesOut | read-only | current | Number of bytes sent. |
| 1.3.6.1.4.1.2.6.19.2.2.8.1.1.8 | ColumnibmMvsUdpResourceName | read-only | current | Resource Name is the text identification of this resource. It represents the ?itName value of the associating resource's relationship with the UDP Stack. |
| 1.3.6.1.4.1.2.6.19.2.2.8.1.1.9 | ColumnibmMvsUdpSubtask | read-only | current | 4 bytes hex decimal |
| 1.3.6.1.4.1.2.6.19.2.2.8.1.1.10 | ColumnibmMvsUdpResourceId | read-only | current | Resource ID is the numeric identification of this resource. |
| 1.3.6.1.4.1.2.6.19.2.2.8.1.1.11 | ColumnibmMvsUdpSockOpt | read-only | current | flag for socket options (1 byte hex valuel) -bit(1) = allow broadcast address -bit(2) = allow loopback of datagrams -bit(3) = bypass normal routing -bit(4) = f… |
| 1.3.6.1.4.1.2.6.19.2.2.8.1.1.12 | ColumnibmMvsUdpSendLim | read-only | current | maximum transmit datagram size |
| 1.3.6.1.4.1.2.6.19.2.2.8.1.1.13 | ColumnibmMvsUdpRecvLim | read-only | current | maximum received datagram size |
| 1.3.6.1.4.1.2.6.19.2.2.8.1.1.14 | ColumnibmMvsUdpEntryState | read-write | current | A entry's state will always be active unless it is to be deleted. This is accomplished by setting this object to delete. A set of active is invalid. |
| 1.3.6.1.4.1.2.6.19.2.2.8.1.1.15 | ColumnibmMvsUdpMcastTTL | read-only | current | Time-to-live value for a multicast datagram. |
| 1.3.6.1.4.1.2.6.19.2.2.8.1.1.16 | ColumnibmMvsUdpMcastLoopback | read-only | current | If true(1), indicates that loopback is enabled for outbound multicast datagrams. If false(2), indicates either that loopback is disabled for outbound multicast… |
| 1.3.6.1.4.1.2.6.19.2.2.8.1.1.17 | ColumnibmMvsUdpMcastLinkAddr | read-only | current | IP address of the interface used for outbound multicast datagrams. |
| 1.3.6.1.4.1.2.6.19.2.2.8.1.1.18 | ColumnibmMvsUdpDSField | read-only | current | The Differentiated Services field value in effect for this udpTable entry. The value may be one of the following: - If there is a Service Policy Agent policy i… |
| 1.3.6.1.4.1.2.6.19.2.2.8.2 | TableibmTcpipMvsUdpMcastRecvTable | not-accessible | current | The table listing UDP sockets that receive multicast data. The table is ordered by the interface being used by the socket for incoming datagrams, the UDP socke… |
| 1.3.6.1.4.1.2.6.19.2.2.8.2.1 | RowibmTcpipMvsUdpMcastRecvEntry | not-accessible | current | Entry defining a UDP socket that receives multicast data. |
| 1.3.6.1.4.1.2.6.19.2.2.8.2.1.1 | ColumnibmMvsUdpMcastRecvLocalAddress | not-accessible | current | The local IP address for this UDP listener. In the case of a UDP listener which is willing to accept datagrams for any IP interface associated with the node, t… |
| 1.3.6.1.4.1.2.6.19.2.2.8.2.1.2 | ColumnibmMvsUdpMcastRecvLocalPort | not-accessible | current | The local port number for this UDP listener. |
| 1.3.6.1.4.1.2.6.19.2.2.8.2.1.3 | ColumnibmMvsUdpMcastRecvGroup | not-accessible | current | Specifies the IP address of the multicast group |
| 1.3.6.1.4.1.2.6.19.2.2.8.2.1.4 | ColumnibmMvsUdpMcastRecvLinkAddr | read-only | current | The IP address of the interface used for incoming packets for this multicast group on this socket. |
| 1.3.6.1.4.1.2.6.19.2.2.9 | NodeibmTcpipMvsIpGroup | |||
| 1.3.6.1.4.1.2.6.19.2.2.9.1 | ScalaribmMvsIpInDevLayerCalls | read-only | current | Number of times the inbound TCP/IP Data Path has received control from the Device Layer. This counter may be less than the number of packets received (ipInRece… |
| 1.3.6.1.4.1.2.6.19.2.2.9.2 | ScalaribmMvsIpInUnpackErrors | read-only | current | Number of times a received frame could not be unpacked into its consistuent datagrams, resulting in packet loss. A non-zero value in this counter may be eviden… |
| 1.3.6.1.4.1.2.6.19.2.2.9.3 | ScalaribmMvsIpInDiscardsMemory | read-only | current | Number of inbound packets discarded due to a CSM storage shortage. |
| 1.3.6.1.4.1.2.6.19.2.2.9.4 | ScalaribmMvsIpOutDiscardsDlcSynch | read-only | current | Number of outbound packets discarded due to a synchronous error in the Data Link Control. Synchronous DLC errors are detected on the interface between TCP/IP a… |
| 1.3.6.1.4.1.2.6.19.2.2.9.5 | ScalaribmMvsIpOutDiscardsDlcAsynch | read-only | current | Number of outbound packets discarded due to an asynchronous error in the Data Link Control. Asynchronous DLC errors may occur for a variety of reasons, includi… |
| 1.3.6.1.4.1.2.6.19.2.2.9.6 | ScalaribmMvsIpOutDiscardsMemory | read-only | current | Number of outbound packets discarded due to a CSM storage shortage. |
| 1.3.6.1.4.1.2.6.19.2.2.10 | NodeibmTcpipMvsOsaExpGroup | |||
| 1.3.6.1.4.1.2.6.19.2.2.10.1 | TableosaexpChannelTable | not-accessible | current | One entry in this table will exist per OSA-Express Device Interface. If the values for objects ibmMvsOsaExpCurLparName/Num are not the same as the values for o… |
| 1.3.6.1.4.1.2.6.19.2.2.10.1.1 | RowosaexpChannelEntry | not-accessible | current | Definition of a single entry in the osaexpChannelTable. Indexed by the ifIndex of the corresponding DEVICE interface. |
| 1.3.6.1.4.1.2.6.19.2.2.10.1.1.1 | ColumnibmMvsOsaExpChannelNumber | read-only | current | The channel number for this interface. |
| 1.3.6.1.4.1.2.6.19.2.2.10.1.1.2 | ColumnibmMvsOsaExpChannelType | read-only | current | For OSA-Express adapters supporting QDIO mode, the value will be osd(17). For OSA-Express adapters supporting non-QDIO mode, the value will be ose(16). |
| 1.3.6.1.4.1.2.6.19.2.2.10.1.1.3 | ColumnibmMvsOsaExpChannelSubType | read-only | current | Indicates how the channel is configured. |
| 1.3.6.1.4.1.2.6.19.2.2.10.1.1.4 | ColumnibmMvsOsaExpChannelMode | read-only | current | Configured mode of the OSA-Express adapter. This value will be set to nothingConfigured(1) for QDIO adapters that are not configured for LAN Emulation. |
| 1.3.6.1.4.1.2.6.19.2.2.10.1.1.5 | ColumnibmMvsOsaExpChannelState | read-only | current | Hardware channel state: online, not installed, or offline. |
| 1.3.6.1.4.1.2.6.19.2.2.10.1.1.6 | ColumnibmMvsOsaExpChannelShared | read-only | current | An OSA-Express Channel can be shared across multiple LPARs. This object indicates if this channel is currently being shared. |
| 1.3.6.1.4.1.2.6.19.2.2.10.1.1.7 | ColumnibmMvsOsaExpChannelNumPorts | read-only | current | Number of ports on the OSA-Express adapter. For non-ATM adapters, the value reflects the number of physical ports. For ATM adapters the value reflects the numb… |
| 1.3.6.1.4.1.2.6.19.2.2.10.1.1.8 | ColumnibmMvsOsaExpChannelDeterNodeDesc | read-only | current | Describes the generic node descriptor layout. This object represents the ND obtained from the CHSC instruction: /* ND Flags */ int bValidity :3; /* 1:is ND val… |
| 1.3.6.1.4.1.2.6.19.2.2.10.1.1.9 | ColumnibmMvsOsaExpChannelControlUnitNumber | read-only | current | The control unit number associated with the OSA-Express Channel. |
| 1.3.6.1.4.1.2.6.19.2.2.10.1.1.10 | ColumnibmMvsOsaExpChannelCodeLevel | read-only | current | ibmMvsOsaExpChannelCodeLevel is the firmware (or micro code level) of the OSA adapter. For example, OSA adapter level 05.60 would be represented as 0x0560 by t… |
| 1.3.6.1.4.1.2.6.19.2.2.10.1.1.11 | ColumnibmMvsOsaExpChannelCurLparName | read-only | current | LPAR name of the OSA/SF from which this data was retrieved. |
| 1.3.6.1.4.1.2.6.19.2.2.10.1.1.12 | ColumnibmMvsOsaExpChannelCurLparNum | read-only | current | LPAR number of the OSA/SF from which this data was retrieved. |
| 1.3.6.1.4.1.2.6.19.2.2.10.1.1.13 | ColumnibmMvsOsaExpChannelManLparName | read-only | current | LPAR name of the OSA Support Facility managing this channel. Only one OSA/SF can manage a OSA-Express Channel within an MVS Sysplex even though multiple OSA/SF… |
| 1.3.6.1.4.1.2.6.19.2.2.10.1.1.14 | ColumnibmMvsOsaExpChannelManLparNum | read-only | current | LPAR number of the OSA Support Facility managing this channel (set to 0xFFFF if not being managed by a OSA/SF). |
| 1.3.6.1.4.1.2.6.19.2.2.10.1.1.15 | ColumnibmMvsOsaExpChannelPCIBusUtil1Min | read-only | current | The average, over a 1 minute interval, of the percentage of time that the PCI bus was utilized to transfer data. It does not include idle time or time used by … |
| 1.3.6.1.4.1.2.6.19.2.2.10.1.1.16 | ColumnibmMvsOsaExpChannelProcessorUtil1Min | read-only | current | The average, over a 1 minute interval, of the percentage of time that the CHPID Processor was utilized to transfer data. It does not include idle time or time … |
| 1.3.6.1.4.1.2.6.19.2.2.10.1.1.17 | ColumnibmMvsOsaExpChannelPCIBusUtil5Min | read-only | current | The average, over a 5 minute interval, of the percentage of time that the PCI bus was utilized to transfer data. It does not include idle time or time used by … |
| 1.3.6.1.4.1.2.6.19.2.2.10.1.1.18 | ColumnibmMvsOsaExpChannelProcessorUtil5Min | read-only | current | The average, over a 5 minute interval, of the percentage of time that the CHPID Processor was utilized to transfer data. It does not include idle time or time … |
| 1.3.6.1.4.1.2.6.19.2.2.10.1.1.19 | ColumnibmMvsOsaExpChannelPCIBusUtilHour | read-only | current | The average, over an hour interval, of the percentage of time that the PCI bus was utilized to transfer data. It does not include idle time or time used by rou… |
| 1.3.6.1.4.1.2.6.19.2.2.10.1.1.20 | ColumnibmMvsOsaExpChannelProcessorUtilHour | read-only | current | The average, over an hour interval, of the percentage of time that the CHPID Processor was utilized to transfer data. It does not include idle time or time use… |
| 1.3.6.1.4.1.2.6.19.2.2.10.2 | TableosaexpPerfTable | not-accessible | current | This table provides performance information per each LPAR's utilization of an OSA-Express adapter. The values will be reset when the adapter CHPID is reset. |
| 1.3.6.1.4.1.2.6.19.2.2.10.2.1 | RowosaexpPerfEntry | not-accessible | current | Definition of a single entry in the osaexpPerfTable. Indexed by the ifIndex of the corresponding DEVICE interface and the LPAR number. |
| 1.3.6.1.4.1.2.6.19.2.2.10.2.1.1 | ColumnibmMvsOsaExpPerfLparNum | not-accessible | current | LPAR number of the LPAR to which the performance objects apply. |
| 1.3.6.1.4.1.2.6.19.2.2.10.2.1.2 | ColumnibmMvsOsaExpPerfProcessorUtil1Min | read-only | current | The average, over a 1 minute interval, of the percentage of time that the CHPID Processor was utilized to transfer data for a specific LPAR. It does not includ… |
| 1.3.6.1.4.1.2.6.19.2.2.10.2.1.3 | ColumnibmMvsOsaExpPerfInKbytesRate1Min | read-only | current | The average, over a 1 minute interval, of the number of inbound kilobytes processed for a specific LPAR. When the ibmMvsOsaExpPerfProcessorUtil1Min object for … |
| 1.3.6.1.4.1.2.6.19.2.2.10.2.1.4 | ColumnibmMvsOsaExpPerfOutKbytesRate1Min | read-only | current | The average, over a 1 minute interval, of the number of outbound kilobytes processed for a specific LPAR. When the ibmMvsOsaExpPerfProcessorUtil1Min object for… |
| 1.3.6.1.4.1.2.6.19.2.2.10.2.1.5 | ColumnibmMvsOsaExpPerfProcessorUtil5Min | read-only | current | The average, over a 5 minute interval, of the percentage of time that the CHPID Processor was utilized to transfer data for a specific LPAR. It does not includ… |
| 1.3.6.1.4.1.2.6.19.2.2.10.2.1.6 | ColumnibmMvsOsaExpPerfInKbytesRate5Min | read-only | current | The average, over a 5 minute interval, of the number of inbound kilobytes processed for a specific LPAR. When the ibmMvsOsaExpPerfProcessorUtil5Min object for … |
| 1.3.6.1.4.1.2.6.19.2.2.10.2.1.7 | ColumnibmMvsOsaExpPerfOutKbytesRate5Min | read-only | current | The average, over a 5 minute interval, of the number of outbound kilobytes processed for a specific LPAR. When the ibmMvsOsaExpPerfProcessorUtil5Min object for… |
| 1.3.6.1.4.1.2.6.19.2.2.10.2.1.8 | ColumnibmMvsOsaExpPerfProcessorUtilHour | read-only | current | The average, over an hour interval, of the percentage of time that the CHPID Processor was utilized to transfer data for a specific LPAR. It does not include i… |
| 1.3.6.1.4.1.2.6.19.2.2.10.2.1.9 | ColumnibmMvsOsaExpPerfInKbytesRateHour | read-only | current | The average, over an hour interval, of the number of inbound kilobytes processed for a specific LPAR. When the ibmMvsOsaExpPerfProcessorUtilHour object for a s… |
| 1.3.6.1.4.1.2.6.19.2.2.10.2.1.10 | ColumnibmMvsOsaExpPerfOutKbytesRateHour | read-only | current | The average, over an hour interval, of the number of outbound kilobytes processed for a specific LPAR. When the ibmMvsOsaExpPerfProcessorUtilHour object for a … |
| 1.3.6.1.4.1.2.6.19.2.2.10.3 | TableosaexpEthPortTable | not-accessible | current | This table is intended to represent the ethernet Ports associated with the osaexpChannelTable entries for ethernet adapters. Each OSA-Express Channel has one o… |
| 1.3.6.1.4.1.2.6.19.2.2.10.3.1 | RowosaexpEthPortEntry | not-accessible | current | Definition of a single entry in the osaexpEthPortTable. Indexed by the ifIndex of the corresponding LINK interface. |
| 1.3.6.1.4.1.2.6.19.2.2.10.3.1.1 | ColumnibmMvsOsaExpEthPortNumber | read-only | current | Port number, starts at 0. |
| 1.3.6.1.4.1.2.6.19.2.2.10.3.1.2 | ColumnibmMvsOsaExpEthPortType | read-only | current | The physical port type. |
| 1.3.6.1.4.1.2.6.19.2.2.10.3.1.3 | ColumnibmMvsOsaExpEthPortHardwareState | read-only | current | The hardware state of the port: 1 - Unknown port hardware state. 2 - OSA has detected a loss of signal on the link. (A likely cause of this condition is an imp… |
| 1.3.6.1.4.1.2.6.19.2.2.10.3.1.4 | ColumnibmMvsOsaExpEthPortServiceMode | read-only | current | |
| 1.3.6.1.4.1.2.6.19.2.2.10.3.1.5 | ColumnibmMvsOsaExpEthPortDisabledStatus | read-only | current | When the value of ibmMvsOsaExpEthPortHardwareState is disabled(3), this object explains the reason for the disabled state. The value for this object may be a c… |
| 1.3.6.1.4.1.2.6.19.2.2.10.3.1.6 | ColumnibmMvsOsaExpEthPortConfigName | read-only | current | Configuration name. |
| 1.3.6.1.4.1.2.6.19.2.2.10.3.1.7 | ColumnibmMvsOsaExpEthPortConfigSpeed | read-only | current | The configured port speed. For OSA-Express Gigabit Ethernet adapters the port speed can not be configured so the value of this object will be 1000MbFullDuplex(… |
| 1.3.6.1.4.1.2.6.19.2.2.10.3.1.8 | ColumnibmMvsOsaExpEthPortActiveSpeed | read-only | current | The actual port speed. |
| 1.3.6.1.4.1.2.6.19.2.2.10.3.1.9 | ColumnibmMvsOsaExpEthPortMacAddrActive | read-only | current | A 6 byte OCTET STRING which contains the current MAC address in use on the adapter. |
| 1.3.6.1.4.1.2.6.19.2.2.10.3.1.10 | ColumnibmMvsOsaExpEthPortMacAddrBurntIn | read-only | current | A 6 byte OCTET STRING which contains the adapter's burned in MAC address. |
| 1.3.6.1.4.1.2.6.19.2.2.10.3.1.11 | ColumnibmMvsOsaExpEthPortUserData | read-only | current | Configured port description. |
| 1.3.6.1.4.1.2.6.19.2.2.10.3.1.12 | ColumnibmMvsOsaExpEthPortOutPackets | read-only | current | The count of the total number of packets transmitted from this port. A CHPID reset will cause this value to be reset to zero. |
| 1.3.6.1.4.1.2.6.19.2.2.10.3.1.13 | ColumnibmMvsOsaExpEthPortInPackets | read-only | current | The count of the total number of packets received by this port. A CHPID reset will cause this value to be reset to zero. |
| 1.3.6.1.4.1.2.6.19.2.2.10.3.1.14 | ColumnibmMvsOsaExpEthPortInGroupFrames | read-only | current | The count of the total number of group frames received by this port. A CHPID reset will cause this value to be reset to zero. |
| 1.3.6.1.4.1.2.6.19.2.2.10.3.1.15 | ColumnibmMvsOsaExpEthPortInBroadcastFrames | read-only | current | The count of the total number of broadcast frames received by this port. A CHPID reset will cause this value to be reset to zero. |
| 1.3.6.1.4.1.2.6.19.2.2.10.3.1.16 | ColumnibmMvsOsaExpEthPortName | read-only | current | Specifies the Port Name which must also be entered at the connection manager on the host and the application. Port Name is specifed to OSA/SF as a config file … |
| 1.3.6.1.4.1.2.6.19.2.2.10.3.1.17 | ColumnibmMvsOsaExpEthPortInUnknownIPFrames | read-only | current | The count of the total number of packets that were discarded because they did not have a matching IP address and there was no primary nor secondary router defa… |
| 1.3.6.1.4.1.2.6.19.2.2.10.3.1.18 | ColumnibmMvsOsaExpEthPortGroupMacAddrs | read-only | current | This field contains the active Group Addresses. An individual Group Address is 6 bytes long. Therefore, this field is actually 32 times (OCTET STRING(SIZE(6)) … |
| 1.3.6.1.4.1.2.6.19.2.2.10.4 | TableosaexpEthSnaTable | not-accessible | current | This table is intended to represent the data that is available from an OSA-Express ethernet Port that is running in SNA mode. An entry in this table is associa… |
| 1.3.6.1.4.1.2.6.19.2.2.10.4.1 | RowosaexpEthSnaEntry | not-accessible | current | Definition of a single entry in the osaexpEthSnaTable. Indexed by the ifIndex of the corresponding LINK interface. |
| 1.3.6.1.4.1.2.6.19.2.2.10.4.1.1 | ColumnibmMvsOsaExpEthSnaInactTimer | read-only | current | The inactivity timer. An enabled inactivity timer (Ti) periodically tests the viability of the network media. The timer setting applies to all the clients on t… |
| 1.3.6.1.4.1.2.6.19.2.2.10.4.1.2 | ColumnibmMvsOsaExpEthSnaRespTimer | read-only | current | The response timer. The T1 timer clocks link events that require responses from clients on the network. These link events include SABME/UA exchanges, I-frame l… |
| 1.3.6.1.4.1.2.6.19.2.2.10.4.1.3 | ColumnibmMvsOsaExpEthSnaAckTimer | read-only | current | The acknowledgement timer. An OSA starts the T2 timer when it receives an I-format LPDU and stops when it sends an acknowledgement. An acknowledgement is sent … |
| 1.3.6.1.4.1.2.6.19.2.2.10.4.1.4 | ColumnibmMvsOsaExpEthSnaMaxIFramesBeforeAck | read-only | current | Maximum I frames before ACK (N3). The maximum number of I-format link protocol data units (LPDUs) that can be received by an OSA before it sends an acknowledge… |
| 1.3.6.1.4.1.2.6.19.2.2.10.4.1.5 | ColumnibmMvsOsaExpEthSnaMaxTransmitWindow | read-only | current | SNA maximum transmit window (TW). The maximum number of outstanding I-format link protocol data units (LPDUs). It is also called the maximum transmit window co… |
| 1.3.6.1.4.1.2.6.19.2.2.11 | NodeibmTcpipMvsDVIPAGroup | |||
| 1.3.6.1.4.1.2.6.19.2.2.11.1 | TableibmMvsDVIPATable | not-accessible | current | Each entry in this table represents a Dynamic VIPA (DVIPA) interface configured to this stack, and supports DVIPA status information. |
| 1.3.6.1.4.1.2.6.19.2.2.11.1.1 | RowibmMvsDVIPAEntry | not-accessible | current | Definition of a single entry in the ibmMvsDVIPATable. |
| 1.3.6.1.4.1.2.6.19.2.2.11.1.1.1 | ColumnibmMvsDVIPAIpAddrType | not-accessible | current | The IP address type of the ibmMvsDVIPAIpAddr object. |
| 1.3.6.1.4.1.2.6.19.2.2.11.1.1.2 | ColumnibmMvsDVIPAIpAddr | not-accessible | current | The dynamic VIPA IP address. |
| 1.3.6.1.4.1.2.6.19.2.2.11.1.1.3 | ColumnibmMvsDVIPAMaskType | read-only | current | The IP address type of the ibmMvsDVIPAMaskAddr object This object will be set to unknown(0) for entries whose ibmMvsDVIPAOrigin value is backup(2). |
| 1.3.6.1.4.1.2.6.19.2.2.11.1.1.4 | ColumnibmMvsDVIPAMaskAddr | read-only | current | The address mask. This object will be set to a zero-length string for entries whose ibmMvsDVIPAOrigin value is backup(2). |
| 1.3.6.1.4.1.2.6.19.2.2.11.1.1.5 | ColumnibmMvsDVIPAStatus | read-only | current | The status of this DVIPA on the stack. A status of unknown(1) should not occur and represents an error. |
| 1.3.6.1.4.1.2.6.19.2.2.11.1.1.6 | ColumnibmMvsDVIPAOrigin | read-only | current | The origin of how this DVIPA came to be configured to the stack. A value of backup(2) or define(3) indicates which VIPADYNAMIC Profile statement was used to co… |
| 1.3.6.1.4.1.2.6.19.2.2.11.1.1.7 | ColumnibmMvsDVIPARank | read-only | current | This stack's rank in the chain of backup stacks for a given dynamic VIPA. For entries whose ibmMvsDVIPAOrigin value is not backup(2) or define(3), this object … |
| 1.3.6.1.4.1.2.6.19.2.2.11.1.1.8 | ColumnibmMvsDVIPADistributeStatus | read-only | current | The status of this DVIPA on the stack in relation to the Sysplex Distributor function. A value of none(1) indicates that the DVIPA is not participating in the … |
| 1.3.6.1.4.1.2.6.19.2.2.11.1.1.9 | ColumnibmMvsDVIPAMoveable | read-only | current | The manner in which a dynamic VIPA IP address should be moved to another stack. A value of none(1) indicates that moveable status does not apply to this DVIPA.… |
| 1.3.6.1.4.1.2.6.19.2.2.11.1.1.10 | ColumnibmMvsDVIPAServMgrEnabled | read-only | current | The status of this DVIPA on the stack in relation to the Service Manager function. A value of true(1) indicates that the DVIPA is participating in the Service … |
| 1.3.6.1.4.1.2.6.19.2.2.11.2 | TableibmMvsDVIPARangeConfTable | not-accessible | current | Each entry in this table represents a subnet defined by the VIPARANGE Profile statement in which requests for activating a DVIPA via a BIND or SIOCSVIPA IOCTL,… |
| 1.3.6.1.4.1.2.6.19.2.2.11.2.1 | RowibmMvsDVIPARangeConfEntry | not-accessible | current | Definition of a single entry in the ibmMvsDVIPARangeConfTable. |
| 1.3.6.1.4.1.2.6.19.2.2.11.2.1.1 | ColumnibmMvsDVIPARangeConfIpAddrType | not-accessible | current | The IP address type of the ibmMvsDVIPARangeConfIpAddr object. |
| 1.3.6.1.4.1.2.6.19.2.2.11.2.1.2 | ColumnibmMvsDVIPARangeConfIpAddr | not-accessible | current | The dynamic VIPA IP address. |
| 1.3.6.1.4.1.2.6.19.2.2.11.2.1.3 | ColumnibmMvsDVIPARangeConfMaskType | not-accessible | current | The IP address type of the ibmMvsDVIPARangeConfMaskAddr object. |
| 1.3.6.1.4.1.2.6.19.2.2.11.2.1.4 | ColumnibmMvsDVIPARangeConfMaskAddr | not-accessible | current | The dynamic VIPA IP address. |
| 1.3.6.1.4.1.2.6.19.2.2.11.2.1.5 | ColumnibmMvsDVIPARangeConfMoveable | read-create | current | The manner in which a dynamic VIPA IP address defined by a VIPARANGE statement, should be moved to another stack. A value of nonDisruptive(1) means that this D… |
| 1.3.6.1.4.1.2.6.19.2.2.11.2.1.6 | ColumnibmMvsDVIPARangeConfStatus | read-create | current | This object allows entries to be created and deleted in the ibmMvsDVIPARangeConfTable. Note that an attempt to set any read-create object defined within an ibm… |
| 1.3.6.1.4.1.2.6.19.2.2.11.3 | TableibmMvsDVIPADistConfTable | not-accessible | current | Each entry in this table represents a dynamic VIPA and port for which connection requests are to be distributed to other stacks as defined by the VIPADISTRIBUT… |
| 1.3.6.1.4.1.2.6.19.2.2.11.3.1 | RowibmMvsDVIPADistConfEntry | not-accessible | current | Definition of a single entry in the ibmMvsDVIPADistConfTable. |
| 1.3.6.1.4.1.2.6.19.2.2.11.3.1.1 | ColumnibmMvsDVIPADistConfIpAddrType | not-accessible | current | The IP address type of the ibmMvsDVIPADistConfIpAddr object. |
| 1.3.6.1.4.1.2.6.19.2.2.11.3.1.2 | ColumnibmMvsDVIPADistConfIpAddr | not-accessible | current | The dynamic VIPA IP address. |
| 1.3.6.1.4.1.2.6.19.2.2.11.3.1.3 | ColumnibmMvsDVIPADistConfPort | not-accessible | current | The dynamic VIPA distributed port. |
| 1.3.6.1.4.1.2.6.19.2.2.11.3.1.4 | ColumnibmMvsDVIPADistConfTargetDynXcfIpAddrType | not-accessible | current | The IP address type of the ibmMvsDVIPADistConfTargetDynXcfIpAddr object. If the ALL parameter was specified on the VIPADISTRIBUTE Profile statement, this objec… |
| 1.3.6.1.4.1.2.6.19.2.2.11.3.1.5 | ColumnibmMvsDVIPADistConfTargetDynXcfIpAddr | not-accessible | current | The dynamic XCF IP address of the target stack. If the ALL parameter was specified on the VIPADISTRIBUTE Profile statement, this object will be set to a zero-l… |
| 1.3.6.1.4.1.2.6.19.2.2.11.3.1.6 | ColumnibmMvsDVIPADistConfStatus | read-create | current | This object allows entries to be created and deleted in the ibmMvsDVIPADistConfTable. |
| 1.3.6.1.4.1.2.6.19.2.2.11.4 | TableibmMvsDVIPAConnRoutingTable | not-accessible | current | Each entry in this table represents a dynamic VIPA TCP connection. Entries will be supported in the table for all dynamic VIPA interfaces for which MOVEABLE IM… |
| 1.3.6.1.4.1.2.6.19.2.2.11.4.1 | RowibmMvsDVIPAConnRoutingEntry | not-accessible | current | Definition of a single entry in the ibmMvsDVIPAConnRoutingTable. |
| 1.3.6.1.4.1.2.6.19.2.2.11.4.1.1 | ColumnibmMvsDVIPAConnPort | not-accessible | current | The dynamic VIPA port. |
| 1.3.6.1.4.1.2.6.19.2.2.11.4.1.2 | ColumnibmMvsDVIPAConnRemIpAddrType | not-accessible | current | The IP address type of the ibmMvsDVIPAConnRemIpAddr object. |
| 1.3.6.1.4.1.2.6.19.2.2.11.4.1.3 | ColumnibmMvsDVIPAConnRemIpAddr | not-accessible | current | The remote IP address for this TCP connection. |
| 1.3.6.1.4.1.2.6.19.2.2.11.4.1.4 | ColumnibmMvsDVIPAConnRemPort | not-accessible | current | The remote port for this TCP connection. |
| 1.3.6.1.4.1.2.6.19.2.2.11.4.1.5 | ColumnibmMvsDVIPAConnDynXcfIpAddrType | read-only | current | The IP address type of the ibmMvsDVIPAConnDynXcfIpAddr object. |
| 1.3.6.1.4.1.2.6.19.2.2.11.4.1.6 | ColumnibmMvsDVIPAConnDynXcfIpAddr | read-only | current | The dynamic XCF IP address of the Sysplex Distributor target stack, or stack which is the endpoint of the connection. |
| 1.3.6.1.4.1.2.6.19.2.2.11.4.1.7 | ColumnibmMvsDVIPAConnPolicyRuleName | read-only | current | The Service Policy Agent Policy Rule name that the connection maps to. If the Service Policy Agent is not active or the connection does not map to a policy, th… |
| 1.3.6.1.4.1.2.6.19.2.2.11.4.1.8 | ColumnibmMvsDVIPAConnPolicyActionName | read-only | current | The Service Policy Agent Policy Action name that the connection maps to. If the Service Policy Agent is not active or the connection does not map to a policy, … |
| 1.3.6.1.4.1.2.6.19.2.2.11.5 | TableibmMvsDVIPADistPortTable | not-accessible | current | An entry exists in this table for every target stack per distributed dynamic VIPA and port. This table is supported only by stacks which are distributing conne… |
| 1.3.6.1.4.1.2.6.19.2.2.11.5.1 | RowibmMvsDVIPADistPortEntry | not-accessible | current | Definition of a single entry in the ibmMvsDVIPADistPortTable. |
| 1.3.6.1.4.1.2.6.19.2.2.11.5.1.1 | ColumnibmMvsDVIPADistPortPort | not-accessible | current | The dynamic VIPA distributed port. |
| 1.3.6.1.4.1.2.6.19.2.2.11.5.1.2 | ColumnibmMvsDVIPADistPortTargetDynXcfIpAddrType | not-accessible | current | The IP address type of the ibmMvsDVIPADistPortTargetDynXcfIpAddr object. |
| 1.3.6.1.4.1.2.6.19.2.2.11.5.1.3 | ColumnibmMvsDVIPADistPortTargetDynXcfIpAddr | not-accessible | current | The dynamic XCF IP address of the target stack. |
| 1.3.6.1.4.1.2.6.19.2.2.11.5.1.4 | ColumnibmMvsDVIPADistPortReadyCount | read-only | current | The number of servers ready at the port on the target stack, to service connection requests. |
| 1.3.6.1.4.1.2.6.19.2.2.11.5.1.5 | ColumnibmMvsDVIPADistPortTotalConn | read-only | current | The total number of connections for the dynamic VIPA IP address and port which have been distributed to the target stack. |
| 1.3.6.1.4.1.2.6.19.2.2.11.5.1.6 | ColumnibmMvsDVIPADistPortWlmWeight | read-only | current | The Workload Manager weight value for the MVS system on which the target stack is located. The value is normalized such that the lowest value is 1. This weight… |
| 1.3.6.1.4.1.2.6.19.2.2.11.6 | ScalaribmMvsDVIPAServMgrMulticastIpAddrType | read-only | current | The IP address type of the ibmMvsDVIPAServMgrMulticastIpAddr object. |
| 1.3.6.1.4.1.2.6.19.2.2.11.7 | ScalaribmMvsDVIPAServMgrMulticastIpAddr | read-only | current | The type of multicast IP address that will be used for communications between the Sysplex Distributor and the routers acting as Forwarding Agents. This object … |
| 1.3.6.1.4.1.2.6.19.2.2.11.8 | ScalaribmMvsDVIPAServMgrPort | read-only | current | The type of multicast IP address that will be used for communications between the Sysplex Distributor and the routers acting as Forwarding Agents. This object … |
| 1.3.6.1.4.1.2.6.19.2.2.11.9 | ScalaribmMvsDVIPAServMgrPasswordSpecified | read-only | current | Indicates whether a password value was specified on the VIPASMPARMS Profile statement for the Sysplex Distributor Service Manager function. A value of true(1) … |
| 1.3.6.1.4.1.2.6.19.2.2.11.10 | ScalaribmMvsDVIPATrapControl | read-write | current | The value of this object determines which traps will be generated for all dynamic VIPA events. The value of this object is initialized to dvipaStatusChange(0) … |
| 1.3.6.1.4.1.2.6.19.2.3 | NodeibmTCPIPmvsConformance | |||
| 1.3.6.1.4.1.2.6.19.2.3.1 | NodeibmTCPIPmvsCompliances | |||
| 1.3.6.1.4.1.2.6.19.2.3.1.1 | ComplianceibmTCPIPmvsCompliance | current | The compliance statement for the IBM Communications Server product. | |
| 1.3.6.1.4.1.2.6.19.2.3.2 | NodeibmTCPIPmvsGroups | |||
| 1.3.6.1.4.1.2.6.19.2.3.2.1 | GroupibmTCPIPmvsPingGroup | current | ||
| 1.3.6.1.4.1.2.6.19.2.3.2.2 | GroupibmTCPIPmvsSystemGroup | obsolete | ||
| 1.3.6.1.4.1.2.6.19.2.3.2.3 | GroupibmTCPIPmvsTcpGroup | obsolete | Defines the objects that are argumented to the tcpConnTable | |
| 1.3.6.1.4.1.2.6.19.2.3.2.4 | GroupibmTCPIPmvsUdpGroup | obsolete | This group defines those objects that are augmented to a udp listen table entry. | |
| 1.3.6.1.4.1.2.6.19.2.3.2.5 | GroupibmTCPIPmvsAtmSupportGroup | obsolete | This group comprises those objects that are related to atm support. | |
| 1.3.6.1.4.1.2.6.19.2.3.2.6 | GroupibmTCPIPmvsObsoleteGroup | obsolete | This group comprises those objects that are obsolete. | |
| 1.3.6.1.4.1.2.6.19.2.3.2.7 | GroupibmTCPIPmvsAtmNotificationGroup | current | This group comprises those objects that are related to atm support. | |
| 1.3.6.1.4.1.2.6.19.2.3.2.8 | GroupibmTCPIPmvsInterfacesGroup | obsolete | This group comprises those objects that are related to interface entries in the IF-MIB. | |
| 1.3.6.1.4.1.2.6.19.2.3.2.9 | GroupibmTCPIPmvsAtmLeGroup | obsolete | This group comprises those objects that are related to ATM LAN Emulation support. | |
| 1.3.6.1.4.1.2.6.19.2.3.2.10 | GroupibmTCPIPmvsPortGroup | obsolete | This group comprises those objects that represent the current set of PORT and PORTRANGE definitions for this TCP/IP instance. | |
| 1.3.6.1.4.1.2.6.19.2.3.2.11 | GroupibmTCPIPmvsRoutingGroup | current | This group comprises the TCP/IP retransmission parms that are in effect for a locally configured route entry. | |
| 1.3.6.1.4.1.2.6.19.2.3.2.12 | GroupibmTCPIPmvsTcpGroup2 | obsolete | Defines the objects that are augmented to the tcpConnTable | |
| 1.3.6.1.4.1.2.6.19.2.3.2.13 | GroupibmTCPIPmvsSystemGroup2 | obsolete | ||
| 1.3.6.1.4.1.2.6.19.2.3.2.14 | GroupibmTCPIPmvsAtmSupportGroup2 | obsolete | This group comprises those objects that are related to atm support. | |
| 1.3.6.1.4.1.2.6.19.2.3.2.15 | GroupibmTCPIPmvsSystemGroup3 | obsolete | ||
| 1.3.6.1.4.1.2.6.19.2.3.2.16 | GroupibmTCPIPmvsInterfacesGroup2 | obsolete | This group comprises those objects that are related to interface entries in the IF-MIB. | |
| 1.3.6.1.4.1.2.6.19.2.3.2.17 | GroupibmTCPIPmvsUdpGroup2 | obsolete | This group defines those objects that are argumented to a udp listen table entry. | |
| 1.3.6.1.4.1.2.6.19.2.3.2.18 | GroupibmTCPIPmvsSystemGroup4 | obsolete | ||
| 1.3.6.1.4.1.2.6.19.2.3.2.19 | GroupibmTCPIPmvsInterfacesGroup3 | obsolete | This group comprises those objects that are related to interface entries in the IF-MIB. | |
| 1.3.6.1.4.1.2.6.19.2.3.2.20 | GroupibmTCPIPmvsTcpGroup3 | obsolete | Defines the objects that are augmented to the tcpConnTable | |
| 1.3.6.1.4.1.2.6.19.2.3.2.21 | GroupibmTCPIPmvsSystemGroup5 | obsolete | ||
| 1.3.6.1.4.1.2.6.19.2.3.2.22 | GroupibmTCPIPmvsTcpGroup4 | obsolete | Defines the objects that are augmented to the tcpConnTable | |
| 1.3.6.1.4.1.2.6.19.2.3.2.24 | GroupibmTCPIPmvsAtmSupportGroup3 | obsolete | This group comprises those objects that are related to atm support. | |
| 1.3.6.1.4.1.2.6.19.2.3.2.25 | GroupibmTCPIPmvsInterfacesGroup4 | obsolete | This group comprises those objects that are related to interface entries in the IF-MIB. | |
| 1.3.6.1.4.1.2.6.19.2.3.2.26 | GroupibmTCPIPmvsPortGroup2 | current | This group comprises those objects that represent the current set of PORT and PORTRANGE definitions for this TCP/IP instance. | |
| 1.3.6.1.4.1.2.6.19.2.3.2.27 | GroupibmTCPIPmvsAtmSupportGroup4 | current | This group comprises those objects that are related to atm support. | |
| 1.3.6.1.4.1.2.6.19.2.3.2.28 | GroupibmTCPIPmvsTcpGroup5 | obsolete | Defines the objects that are augmented to the tcpConnTable | |
| 1.3.6.1.4.1.2.6.19.2.3.2.29 | GroupibmTCPIPmvsUdpGroup3 | current | This group defines those objects that are augmented to a udp listen table entry. | |
| 1.3.6.1.4.1.2.6.19.2.3.2.30 | GroupibmTCPIPmvsAtmLeGroup2 | current | This group comprises those objects that are related to ATM LAN Emulation support. | |
| 1.3.6.1.4.1.2.6.19.2.3.2.31 | GroupibmTCPIPmvsSystemGroup6 | obsolete | ||
| 1.3.6.1.4.1.2.6.19.2.3.2.32 | GroupibmTCPIPmvsTcpGroup6 | current | Defines objects that are augmented to the tcpConnTable and statistical objects for TCP entities. | |
| 1.3.6.1.4.1.2.6.19.2.3.2.33 | GroupibmTCPIPmvsIpGroup | current | This group defines statistical objects for IP entities. | |
| 1.3.6.1.4.1.2.6.19.2.3.2.34 | GroupibmTCPIPmvsSystemGroup7 | current | ||
| 1.3.6.1.4.1.2.6.19.2.3.2.35 | GroupibmTCPIPmvsOsaExpGroup | current | This group comprises those objects that are related to OSA-Express adapter support. | |
| 1.3.6.1.4.1.2.6.19.2.3.2.36 | GroupibmTCPIPmvsInterfacesGroup5 | current | This group comprises those objects that are related to interface entries in the IF-MIB. | |
| 1.3.6.1.4.1.2.6.19.2.3.2.37 | GroupibmTCPIPmvsDVIPAGroup | current | This group comprises those objects that are related to Dynamic VIPA interfaces. | |
| 1.3.6.1.4.1.2.6.19.2.3.2.38 | GroupibmTCPIPmvsDVIPANotificationGroup | current | This group comprises those notification objects that are related to Dynamic VIPA support. | |
| 1.3.6.1.4.1.2.6.19.2.3.2.39 | GroupibmTCPIPmvsSystemNotificationGroup | current | This group comprises those notification objects that are related to the MVS System group. | |
| 1.3.6.1.4.1.2.11 | NodeibmAgentCaps |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| DeviceLinkTypes | INTEGER { unknown(0), lcs(1), ctc(2), claw(3), cdlc(4), atm(5), x25npsi(6), vipa(7), loopback(8), hch(9), ethernet(10), t8023(11), etheror8023(12), ibmtr(13), fddi(14), ip(15), iucv(16), stack(17), mpcptp(18), snalu0(19), snalu62(20), mpcipa(21), ipaqenet(22), mpcosa(24), osafddi(25), osaenet(26), ipaqtr(27), ipaqidio(28) } | current | Defines the various device and link types. |
| TypeOfService | Integer32 | obsolete | Definition of Type-of-Service (tos). The TOS facility is one of the features of the Type of Service octet in the IP datagram header. The Type of Service octet consists of three fields: 0 1 2 3 4 5 6 7 + : : : : : PRECED… |