ICOTERA-I6400-SERIES
114 objects
The Icotera management information base SMI definitions
Imported Objects
| RFC1213-MIB | DisplayString |
| SNMPv2-SMI | Counter32 Counter64 enterprises Gauge32 Integer32 IpAddress MODULE-IDENTITY OBJECT-IDENTITY OBJECT-TYPE |
| SNMPv2-TC | TEXTUAL-CONVENTION |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.29865 | Identityicotera | The Icotera management information base SMI definitions | ||
| 1.3.6.1.4.1.29865.11 | IdentityictIGW1k | current | Device related SNMP options | |
| 1.3.6.1.4.1.29865.11.2 | NodeictMgmt | |||
| 1.3.6.1.4.1.29865.11.2.1 | IdentityictMgmtMib | current | The MIB which allows managing the CPE | |
| 1.3.6.1.4.1.29865.11.2.1.1 | IdentityictFwUpg | current | The MIB of firmware upgrade | |
| 1.3.6.1.4.1.29865.11.2.1.1.1 | ScalarupgUrl | read-write | current | MIB for firmware file path declaration. |
| 1.3.6.1.4.1.29865.11.2.1.1.2 | ScalarupgExecute | read-write | current | MIB for firmware upgrade execution. |
| 1.3.6.1.4.1.29865.11.2.1.1.3 | ScalarupgStatus | read-only | current | MIB used to check firmware upgrade status. |
| 1.3.6.1.4.1.29865.11.2.1.2 | IdentityictCfgUpdate | current | The MIB of configuration update | |
| 1.3.6.1.4.1.29865.11.2.1.2.1 | ScalarcfgTftpPath | read-write | current | MIB for configuration file path stored at TFTP declaration. |
| 1.3.6.1.4.1.29865.11.2.1.2.2 | ScalarcfgExecute | read-write | current | MIB for configuration upload exectution. |
| 1.3.6.1.4.1.29865.11.2.1.2.3 | ScalarcfgStatus | read-only | current | MIB used to check configuration upload status. |
| 1.3.6.1.4.1.29865.11.2.1.3 | IdentityictReboot | current | The MIB responsible for CPE reboot | |
| 1.3.6.1.4.1.29865.11.2.1.3.2 | ScalarperformCpeReboot | read-write | current | MIB for CPE reboot execution. |
| 1.3.6.1.4.1.29865.11.3 | NodeictServices | |||
| 1.3.6.1.4.1.29865.11.3.1 | IdentityictServicesMibs | current | The MIB module for managing Icotera services | |
| 1.3.6.1.4.1.29865.11.3.1.1 | IdentityictCatv | current | The MIB module for managing Icotera services | |
| 1.3.6.1.4.1.29865.11.3.1.1.1 | ScalarcatvModuleAdminStatus | read-only | current | The administrative status of the module, this can be enabled(1) or disabled(0). |
| 1.3.6.1.4.1.29865.11.3.1.1.2 | ScalarcatvModuleFilter | read-only | current | Package filter selected for catv module |
| 1.3.6.1.4.1.29865.11.3.1.1.3 | ScalarcatvModuleRflevel | read-only | current | RF signal amplification on CATV output |
| 1.3.6.1.4.1.29865.11.3.1.1.4 | ScalarcatvModuleLowSignal | read-only | current | Low signal level of catv led |
| 1.3.6.1.4.1.29865.11.3.1.1.5 | ScalarcatvModuleSignalDetected | read-only | current | Tells whether CATV signal is detected: yes(1) - detected, no(0) - not detected. |
| 1.3.6.1.4.1.29865.11.3.1.1.6 | ScalarcatvModulePowerLevel | read-only | current | Current CATV power level. It can have one of the following values: - any integer between -1099 and 199 when the power level is higher than -11.00 and lower tha… |
| 1.3.6.1.4.1.29865.11.3.1.3 | IdentityictTransceiver | current | The container for DDM related MIB module | |
| 1.3.6.1.4.1.29865.11.3.1.3.1 | ScalartransceiverDdmTemperature | read-only | current | Internally measured transceiver temperature. Represented in increments of 1/256 degrees Celsius, yielding a total range of (minus) 128C to (plus) 128C. |
| 1.3.6.1.4.1.29865.11.3.1.3.2 | ScalartransceiverDdmTxPower | read-only | current | Measured TX output power. Represented in increments of 1/10000 mW. |
| 1.3.6.1.4.1.29865.11.3.1.3.3 | ScalartransceiverDdmRxPower | read-only | current | Measured RX received optical power. Represented in increments of 1/10000 mW. |
| 1.3.6.1.4.1.29865.11.3.1.3.4 | ScalartransceiverDdmVoltage | read-only | current | Internally measured transceiver supply voltage. Represented in increments of 1/10000 V. |
| 1.3.6.1.4.1.29865.11.3.1.3.5 | ScalartransceiverDdmTxBiasCurrent | read-only | current | Measured TX bias current. Represented in increments of 1/500 mA. |
| 1.3.6.1.4.1.29865.11.3.1.3.6 | ScalartransceiverTransceiverType | read-only | current | Type of serial transceiver. |
| 1.3.6.1.4.1.29865.11.3.1.3.7 | ScalartransceiverLaserWavelength | read-only | current | TX Laser Wavelength, units of nm. |
| 1.3.6.1.4.1.29865.11.3.1.3.8 | ScalartransceiverConnectorType | read-only | current | Connector type provided. |
| 1.3.6.1.4.1.29865.11.3.1.3.9 | ScalartransceiverEthernetCompliance | read-only | current | Ethernet compliance. 8-bit bit field: Bit 7 - BASE-PX Bit 6 - BASE-BX10 Bit 5 - 100BASE-FX Bit 4 - 100BASE-LX/LX10 Bit 3 - 1000BASE-T Bit 2 - 1000BASE-CX Bit 1… |
| 1.3.6.1.4.1.29865.11.3.1.3.10 | ScalartransceiverLinkLength | read-only | current | Link length supported for single mode fiber, units of km. |
| 1.3.6.1.4.1.29865.11.3.1.3.11 | ScalartransceiverDiagCapable | read-only | current | Digital diagnostic monitoring implemented. |
| 1.3.6.1.4.1.29865.11.5 | NodeictReset | |||
| 1.3.6.1.4.1.29865.11.5.1 | IdentityictFacRst | current | The MIB parent for CPE reset | |
| 1.3.6.1.4.1.29865.11.5.1.1 | IdentityictFacRstMib | current | The MIB which makes Factory Reset of CPE | |
| 1.3.6.1.4.1.29865.11.5.1.1.1 | ScalarperformFactoryReset | read-write | current | MIB used to perform Factory Reset. |
| 1.3.6.1.4.1.29865.11.7 | NodeictMcastAnalyzer | |||
| 1.3.6.1.4.1.29865.11.7.1 | NodeictMcastAnalyzerCurrent | |||
| 1.3.6.1.4.1.29865.11.7.1.1 | TableictMcastAnalyzerCurrentList | not-accessible | current | A list of currently analyzed multicast groups. |
| 1.3.6.1.4.1.29865.11.7.1.1.1 | RowcurrentListEntry | not-accessible | current | An entry containing a particular multicast group address. |
| 1.3.6.1.4.1.29865.11.7.1.1.1.1 | ColumncurGroupIndex | read-only | current | Index of the analyzed multicast group. |
| 1.3.6.1.4.1.29865.11.7.1.1.1.2 | ColumncurGroupAddr | read-only | current | The IPv4 address of this entry's multicast group. |
| 1.3.6.1.4.1.29865.11.7.1.2 | TableictMcastAnalyzerCurrentMetrics | not-accessible | current | A list of currently analyzed multicast groups and their metrics. |
| 1.3.6.1.4.1.29865.11.7.1.2.1 | RowcurrentMetricsEntry | not-accessible | current | An entry containing metrics concerning a particular multicast group. |
| 1.3.6.1.4.1.29865.11.7.1.2.1.1 | ColumncurMetrGroupAddr | read-only | current | The IPv4 address of this entry's multicast group. |
| 1.3.6.1.4.1.29865.11.7.1.2.1.2 | ColumncurMetrSourceAddr | read-only | current | The source IPv4 address of this multicast stream. |
| 1.3.6.1.4.1.29865.11.7.1.2.1.3 | ColumncurMetrDstPort | read-only | current | The destination port number of this multicast stream. |
| 1.3.6.1.4.1.29865.11.7.1.2.1.4 | ColumncurMetrSrcPort | read-only | current | The source port number of this multicast stream. |
| 1.3.6.1.4.1.29865.11.7.1.2.1.5 | ColumncurMetrTotalBytes | read-only | current | The total number of bytes transferred within the stream. |
| 1.3.6.1.4.1.29865.11.7.1.2.1.6 | ColumncurMetrTotalPackets | read-only | current | The total number of packets transferred within the stream. |
| 1.3.6.1.4.1.29865.11.7.1.2.1.7 | ColumncurMetrKbps | read-only | current | Kilobits per second during last second. |
| 1.3.6.1.4.1.29865.11.7.1.2.1.8 | ColumncurMetrPps | read-only | current | Packets per second during last second. |
| 1.3.6.1.4.1.29865.11.7.1.2.1.9 | ColumncurMetrAvgKbps | read-only | current | Average kilobits per second. |
| 1.3.6.1.4.1.29865.11.7.1.2.1.10 | ColumncurMetrAvgPps | read-only | current | Average packets per second. |
| 1.3.6.1.4.1.29865.11.7.1.2.1.11 | ColumncurMetrMaxDelta | read-only | current | Maximum time period between two successive packets from the last second. |
| 1.3.6.1.4.1.29865.11.7.1.2.1.12 | ColumncurMetrAvgDelta | read-only | current | Average time period between two successive packets from the last second. |
| 1.3.6.1.4.1.29865.11.7.1.2.1.13 | ColumncurMetrTotalMaxDelta | read-only | current | Maximum time period between two successive packets. |
| 1.3.6.1.4.1.29865.11.7.1.2.1.14 | ColumncurMetrTotalAvgDelta | read-only | current | Average time period between two successive packets. |
| 1.3.6.1.4.1.29865.11.7.1.2.1.15 | ColumncurMetrStartTimestamp | read-only | current | The time at which the stream started being analyzed. |
| 1.3.6.1.4.1.29865.11.7.1.2.1.16 | ColumncurMetrStopTimestamp | read-only | current | The time at which the stream stopped being analyzed. |
| 1.3.6.1.4.1.29865.11.7.1.2.1.17 | ColumncurMetrMemberPorts | read-only | current | LAN ports being members of the multicast group. |
| 1.3.6.1.4.1.29865.11.7.1.2.1.18 | ColumncurMetrStreamType | read-only | current | Type of the stream: either RTP or UDP. |
| 1.3.6.1.4.1.29865.11.7.1.2.1.19 | ColumncurMetrSkips | read-only | current | Number of skipped MPG-TS packets during last second. |
| 1.3.6.1.4.1.29865.11.7.1.2.1.20 | ColumncurMetrDiscontinuities | read-only | current | Number of MPG-TS discontinuities during last second. |
| 1.3.6.1.4.1.29865.11.7.1.2.1.21 | ColumncurMetrLost | read-only | current | Number of lost RTP packets during last second. |
| 1.3.6.1.4.1.29865.11.7.1.2.1.22 | ColumncurMetrReordered | read-only | current | Number of reordered RTP packets during last second. |
| 1.3.6.1.4.1.29865.11.7.1.2.1.23 | ColumncurMetrTotalSkips | read-only | current | Total number of skipped MPG-TS packets. |
| 1.3.6.1.4.1.29865.11.7.1.2.1.24 | ColumncurMetrTotalDiscontinuities | read-only | current | Total number of MPG-TS discontinuities. |
| 1.3.6.1.4.1.29865.11.7.1.2.1.25 | ColumncurMetrTotalLost | read-only | current | Total number of lost RTP packets. |
| 1.3.6.1.4.1.29865.11.7.1.2.1.26 | ColumncurMetrTotalReordered | read-only | current | Total number of reordered RTP packets. |
| 1.3.6.1.4.1.29865.11.7.1.2.1.27 | ColumncurMetrAvgLostPps | read-only | current | Average number of lost RTP packets per second. |
| 1.3.6.1.4.1.29865.11.7.1.2.1.28 | ColumncurMetrJitter | read-only | current | Jitter calculated for the last second. |
| 1.3.6.1.4.1.29865.11.7.2 | NodeictMcastAnalyzerHistory | |||
| 1.3.6.1.4.1.29865.11.7.2.1 | TableictMcastAnalyzerHistoryList | not-accessible | current | A list of formerly analyzed multicast groups. |
| 1.3.6.1.4.1.29865.11.7.2.1.1 | RowhistoryListEntry | not-accessible | current | An entry containing a particular multicast group address. |
| 1.3.6.1.4.1.29865.11.7.2.1.1.1 | ColumnhistGroupIndex | read-only | current | Index of the historical multicast group. |
| 1.3.6.1.4.1.29865.11.7.2.1.1.2 | ColumnhistGroupAddr | read-only | current | The IPv4 address of this entry's multicast group. |
| 1.3.6.1.4.1.29865.11.7.2.2 | TableictMcastAnalyzerHistoryMetrics | not-accessible | current | A list of formerly analyzed multicast groups and their metrics. |
| 1.3.6.1.4.1.29865.11.7.2.2.1 | RowhistoryMetricsEntry | not-accessible | current | An entry containing metrics concerning a particular multicast group. |
| 1.3.6.1.4.1.29865.11.7.2.2.1.1 | ColumnhistMetrGroupAddr | read-only | current | The IPv4 address of this entry's multicast group. |
| 1.3.6.1.4.1.29865.11.7.2.2.1.2 | ColumnhistMetrSourceAddr | read-only | current | The source IPv4 address of this multicast stream. |
| 1.3.6.1.4.1.29865.11.7.2.2.1.3 | ColumnhistMetrDstPort | read-only | current | The destination port number of this multicast stream. |
| 1.3.6.1.4.1.29865.11.7.2.2.1.4 | ColumnhistMetrSrcPort | read-only | current | The source port number of this multicast stream. |
| 1.3.6.1.4.1.29865.11.7.2.2.1.5 | ColumnhistMetrTotalBytes | read-only | current | The total number of bytes transferred within the stream. |
| 1.3.6.1.4.1.29865.11.7.2.2.1.6 | ColumnhistMetrTotalPackets | read-only | current | The total number of packets transferred within the stream. |
| 1.3.6.1.4.1.29865.11.7.2.2.1.7 | ColumnhistMetrKbps | read-only | current | Kilobits per second during last second. |
| 1.3.6.1.4.1.29865.11.7.2.2.1.8 | ColumnhistMetrPps | read-only | current | Packets per second during last second. |
| 1.3.6.1.4.1.29865.11.7.2.2.1.9 | ColumnhistMetrAvgKbps | read-only | current | Average kilobits per second. |
| 1.3.6.1.4.1.29865.11.7.2.2.1.10 | ColumnhistMetrAvgPps | read-only | current | Average packets per second. |
| 1.3.6.1.4.1.29865.11.7.2.2.1.11 | ColumnhistMetrMaxDelta | read-only | current | Maximum time period between two successive packets from the last second. |
| 1.3.6.1.4.1.29865.11.7.2.2.1.12 | ColumnhistMetrAvgDelta | read-only | current | Average time period between two successive packets from the last second. |
| 1.3.6.1.4.1.29865.11.7.2.2.1.13 | ColumnhistMetrTotalMaxDelta | read-only | current | Maximum time period between two successive packets. |
| 1.3.6.1.4.1.29865.11.7.2.2.1.14 | ColumnhistMetrTotalAvgDelta | read-only | current | Average time period between two successive packets. |
| 1.3.6.1.4.1.29865.11.7.2.2.1.15 | ColumnhistMetrStartTimestamp | read-only | current | The time at which the stream started being analyzed. |
| 1.3.6.1.4.1.29865.11.7.2.2.1.16 | ColumnhistMetrStopTimestamp | read-only | current | The time at which the stream stopped being analyzed. |
| 1.3.6.1.4.1.29865.11.7.2.2.1.17 | ColumnhistMetrMemberPorts | read-only | current | LAN ports being members of the multicast group. |
| 1.3.6.1.4.1.29865.11.7.2.2.1.18 | ColumnhistMetrStreamType | read-only | current | Type of the stream: either RTP or UDP. |
| 1.3.6.1.4.1.29865.11.7.2.2.1.19 | ColumnhistMetrSkips | read-only | current | Number of skipped MPG-TS packets during last second. |
| 1.3.6.1.4.1.29865.11.7.2.2.1.20 | ColumnhistMetrDiscontinuities | read-only | current | Number of MPG-TS discontinuities during last second. |
| 1.3.6.1.4.1.29865.11.7.2.2.1.21 | ColumnhistMetrLost | read-only | current | Number of lost RTP packets during last second. |
| 1.3.6.1.4.1.29865.11.7.2.2.1.22 | ColumnhistMetrReordered | read-only | current | Number of reordered RTP packets during last second. |
| 1.3.6.1.4.1.29865.11.7.2.2.1.23 | ColumnhistMetrTotalSkips | read-only | current | Total number of skipped MPG-TS packets. |
| 1.3.6.1.4.1.29865.11.7.2.2.1.24 | ColumnhistMetrTotalDiscontinuities | read-only | current | Total number of MPG-TS discontinuities. |
| 1.3.6.1.4.1.29865.11.7.2.2.1.25 | ColumnhistMetrTotalLost | read-only | current | Total number of lost RTP packets. |
| 1.3.6.1.4.1.29865.11.7.2.2.1.26 | ColumnhistMetrTotalReordered | read-only | current | Total number of reordered RTP packets. |
| 1.3.6.1.4.1.29865.11.7.2.2.1.27 | ColumnhistMetrAvgLostPps | read-only | current | Average number of lost RTP packets per second. |
| 1.3.6.1.4.1.29865.11.7.2.2.1.28 | ColumnhistMetrJitter | read-only | current | Jitter calculated for the last second. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| IctDelta | INTEGER | current | Time period between two successive packets expressed in hundredths of a milliseconds. When used in conjunction with the DISPLAY-HINT will show milliseconds and fractions of millisecond. |
| IctJitter | INTEGER | current | When used in conjunction with the DISPLAY-HINT will show jitter calculated for the last second. Without the DISPLAY-HINT the jitter value is multiplied by 100. |
| IctPortList | OCTET STRING | current | Comma-separated list of LAN ports. |
| IctTimeStamp | Counter32 | current | The time as the number of seconds since the Epoch. |