ICOTERA-I6800-SERIES
48 objects
The Icotera management information base SMI definitions
Imported Objects
| IF-MIB | ifIndex InterfaceIndex |
| RFC1213-MIB | DisplayString |
| SNMPv2-SMI | enterprises MODULE-IDENTITY OBJECT-IDENTITY OBJECT-TYPE |
| SNMPv2-TC | MacAddress |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.29865 | Identityicotera | The Icotera management information base SMI definitions | ||
| 1.3.6.1.4.1.29865.12 | IdentityictIGW4k | current | Device related SNMP options | |
| 1.3.6.1.4.1.29865.12.2 | NodeictMgmt | |||
| 1.3.6.1.4.1.29865.12.2.1 | IdentityictMgmtMib | current | The MIB which allows managing the CPE | |
| 1.3.6.1.4.1.29865.12.2.1.1 | IdentityictFwUpg | current | The MIB of firmware upgrade | |
| 1.3.6.1.4.1.29865.12.2.1.1.1 | ScalarupgUrl | read-write | current | Path to file with firmware. |
| 1.3.6.1.4.1.29865.12.2.1.1.2 | ScalarupgExecute | read-write | current | MIB responsible for trigerring firmware upgrade. |
| 1.3.6.1.4.1.29865.12.2.1.1.3 | ScalarupgStatus | read-only | current | MIB show upgrade status. |
| 1.3.6.1.4.1.29865.12.2.1.2 | IdentityictCfgUpdate | current | The MIB of configuration update | |
| 1.3.6.1.4.1.29865.12.2.1.2.1 | ScalarcfgTftpPath | read-write | current | Path to cofiguration file stored at TFTP server. |
| 1.3.6.1.4.1.29865.12.2.1.2.2 | ScalarcfgExecute | read-write | current | MIB responsible for trigerring config upload at CPE. |
| 1.3.6.1.4.1.29865.12.2.1.2.3 | ScalarcfgStatus | read-only | current | MIB show configuration upgrade status. |
| 1.3.6.1.4.1.29865.12.2.1.3 | IdentityictReboot | current | The MIB responsible for CPE reboot | |
| 1.3.6.1.4.1.29865.12.2.1.3.2 | ScalarperformCpeReboot | read-write | current | MIB responsible for trigerring CPE reboot. |
| 1.3.6.1.4.1.29865.12.3 | NodeictServices | |||
| 1.3.6.1.4.1.29865.12.3.1 | IdentityictCatv | current | The MIB module for managing Icotera services | |
| 1.3.6.1.4.1.29865.12.3.1.1 | IdentityictCatvMib | current | The MIB module for managing Icotera services | |
| 1.3.6.1.4.1.29865.12.3.1.1.1 | ScalarcatvModuleAdminStatus | read-only | current | The administrative status of the module, this can be enabled(1) or disabled(0). |
| 1.3.6.1.4.1.29865.12.3.1.1.2 | ScalarcatvModuleFilter | read-only | current | Package filter selected for catv module |
| 1.3.6.1.4.1.29865.12.3.1.1.3 | ScalarcatvModuleRflevel | read-only | current | RF signal amplification on CATV output |
| 1.3.6.1.4.1.29865.12.3.1.1.4 | ScalarcatvModuleLowSignal | read-only | current | Low signal level of catv led |
| 1.3.6.1.4.1.29865.12.3.1.1.5 | ScalarcatvModuleSignalDetected | read-only | current | Tells whether CATV signal is detected: yes(1) - detected, no(0) - not detected. |
| 1.3.6.1.4.1.29865.12.3.1.1.6 | ScalarcatvModulePowerLevel | read-only | current | Current CATV power level. It can have one of the following values: - any integer between -1299 and 199 when the power level is higher than -13.00 and lower tha… |
| 1.3.6.1.4.1.29865.12.3.1.1.7 | ScalarcatvModuleRfOutputLevel | read-only | current | Parameter is supported by special CATV solution. No data will be provided if CPE is not compatible. Calculated RF output value which should be expected. - Expe… |
| 1.3.6.1.4.1.29865.12.3.1.1.8 | ScalarcatvModuleOmi | read-only | current | Parameter is supported by special CATV solution. No data will be provided if CPE is not compatible. Currently OMI value set at CPE. |
| 1.3.6.1.4.1.29865.12.3.2 | IdentityictVoip | current | The MIB module for checking VoIP service | |
| 1.3.6.1.4.1.29865.12.3.2.1 | IdentityictVoipMib | current | The MIB module for checking VoIP service status | |
| 1.3.6.1.4.1.29865.12.3.2.1.1 | ScalarvoipFXSport1 | read-only | current | The administrative status of the FXS port 1 |
| 1.3.6.1.4.1.29865.12.3.2.1.2 | ScalarvoipFXSport2 | read-only | current | The administrative status of the FXS port 2 |
| 1.3.6.1.4.1.29865.12.4 | NodeictDuplex | |||
| 1.3.6.1.4.1.29865.12.4.15 | IdentityictDuplexMib | current | Initial release. | |
| 1.3.6.1.4.1.29865.12.4.15.1 | NodeduplexConfig | |||
| 1.3.6.1.4.1.29865.12.4.15.1.1 | TableifDuplexTable | not-accessible | current | A table containing interface duplex status. |
| 1.3.6.1.4.1.29865.12.4.15.1.1.1 | RowifDuplexEntry | not-accessible | current | Status for a specific interface using ethernet-like medium. |
| 1.3.6.1.4.1.29865.12.4.15.1.1.1.1 | ColumnifDuplexIndex | read-only | current | An index value that uniquely identifies an interface to an ethernet-like medium. The interface identified by a particular value of this index is the same inter… |
| 1.3.6.1.4.1.29865.12.4.15.1.1.1.2 | ColumnifDuplexStatus | read-only | current | The current duplex mode of operation of the interface. 'unknown' indicates that the current duplex mode could not be determined. |
| 1.3.6.1.4.1.29865.12.5 | NodeictReset | |||
| 1.3.6.1.4.1.29865.12.5.1 | IdentityictFacRst | current | The MIB parent for CPE reset | |
| 1.3.6.1.4.1.29865.12.5.1.1 | IdentityictFacRstMib | current | The MIB which makes Factory Reset of CPE | |
| 1.3.6.1.4.1.29865.12.5.1.1.1 | ScalarperformFactoryReset | read-write | current | Status of FactoryReset feature. |
| 1.3.6.1.4.1.29865.12.6 | NodeictDhcp | |||
| 1.3.6.1.4.1.29865.12.6.1 | TableictDHCPsrv | not-accessible | current | Table of DHCPd leases. |
| 1.3.6.1.4.1.29865.12.6.1.1 | RowictDHCPsrvLeases | not-accessible | current | An entry in the table, containing information about lease. |
| 1.3.6.1.4.1.29865.12.6.1.1.1 | ColumnictDHCPsrvIndex | read-only | current | A unique value for LEASE index. |
| 1.3.6.1.4.1.29865.12.6.1.1.2 | ColumnictMacAddress | read-only | current | MAC address of Lease. |
| 1.3.6.1.4.1.29865.12.6.1.1.3 | ColumnictExpire | read-only | current | Lease time until Expire |
| 1.3.6.1.4.1.29865.12.6.1.1.4 | ColumnictIPaddress | read-only | current | IP address learned from host. |
| 1.3.6.1.4.1.29865.12.6.1.1.5 | ColumnictHostName | read-only | current | Hostname. |