ICT-DISTRIBUTION-PANEL-MIB
43 objects
No module-level DESCRIPTION found.
Imported Objects
| RFC-1212 | OBJECT-TYPE |
| RFC-1215 | TRAP-TYPE |
| RFC1155-SMI | enterprises IpAddress |
| RFC1213-MIB | DisplayString |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.39145 | NodeictPower | |||
| 1.3.6.1.4.1.39145.10 | NodedistPanel | |||
| 1.3.6.1.4.1.39145.10.1 | ScalardeviceModel | read-only | mandatory | Model Number |
| 1.3.6.1.4.1.39145.10.2 | ScalardeviceName | read-only | mandatory | Site Name |
| 1.3.6.1.4.1.39145.10.3 | ScalardeviceHardware | read-only | mandatory | Hardware Version |
| 1.3.6.1.4.1.39145.10.4 | ScalardeviceFirmware | read-only | mandatory | Firmware Version |
| 1.3.6.1.4.1.39145.10.5 | ScalardeviceMacAddress | read-only | mandatory | MAC Address |
| 1.3.6.1.4.1.39145.10.6 | ScalarsystemVoltage | read-only | mandatory | System Voltage (Volts) |
| 1.3.6.1.4.1.39145.10.7 | ScalarsystemCurrent | read-only | mandatory | System Current (Amps) |
| 1.3.6.1.4.1.39145.10.8 | TableoutputTable | not-accessible | mandatory | Output Table |
| 1.3.6.1.4.1.39145.10.8.1 | RowoutputEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.39145.10.8.1.1 | ColumnoutputNumber | read-only | mandatory | Output Number |
| 1.3.6.1.4.1.39145.10.8.1.2 | ColumnoutputName | read-only | mandatory | Output Label |
| 1.3.6.1.4.1.39145.10.8.1.3 | ColumnoutputCurrent | read-only | mandatory | Output Current (Amps) |
| 1.3.6.1.4.1.39145.10.8.1.4 | ColumnoutputFuseStatus | read-only | mandatory | Output Fuse Status ('1' indicates Fuse is OK, and '2' indicates Fuse is OPEN) |
| 1.3.6.1.4.1.39145.10.8.1.5 | ColumnoutputEnable | read-write | mandatory | Output Relay Enable ('1' indicates the Output is ENABLED, and '2' indicates the Output is DISABLED) |
| 1.3.6.1.4.1.39145.10.9 | TablealarmTable | not-accessible | mandatory | Alarm Input Table |
| 1.3.6.1.4.1.39145.10.9.1 | RowalarmEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.39145.10.9.1.1 | ColumnalarmNumber | read-only | mandatory | Alarm Input Number |
| 1.3.6.1.4.1.39145.10.9.1.2 | ColumnalarmName | read-only | mandatory | Alarm Input Name |
| 1.3.6.1.4.1.39145.10.9.1.3 | ColumnalarmStatus | read-only | mandatory | Alarm Input Status ('1' indicates Alarm is INACTIVE,'2' indicates Alarm is READY, and '3' indicates Alarm is in an ALARM condition) |
| 1.3.6.1.4.1.39145.10.10 | TablebusTable | not-accessible | mandatory | Bus Table |
| 1.3.6.1.4.1.39145.10.10.1 | RowbusEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.39145.10.10.1.1 | ColumnbusNumber | read-only | mandatory | Bus Number |
| 1.3.6.1.4.1.39145.10.10.1.2 | ColumnbusName | read-only | mandatory | Bus Name |
| 1.3.6.1.4.1.39145.10.10.1.3 | ColumnbusVoltage | read-only | mandatory | Bus Voltage (Volts) |
| 1.3.6.1.4.1.39145.10.10.1.4 | ColumnbusCurrent | read-only | mandatory | Total Bus Current (Amps) |
| 1.3.6.1.4.1.39145.10.101 | NodesysUndervoltageAlarmTrap | Trap generated when a System/Bus Undervoltage Alarm is triggered | ||
| 1.3.6.1.4.1.39145.10.102 | NodesysOvervoltageAlarmTrap | Trap generated when a System/Bus Overvoltage Alarm is triggered | ||
| 1.3.6.1.4.1.39145.10.103 | NodesysOvercurrentAlarmTrap | Trap generated when a System/Bus Overcurrent Alarm is triggered | ||
| 1.3.6.1.4.1.39145.10.104 | NodefuseAlarmTrap | Trap generated when an Output Fuse Alarm is triggered | ||
| 1.3.6.1.4.1.39145.10.105 | NodeundercurrentAlarmTrap | Trap generated when an Output Undercurrent Alarm is triggered | ||
| 1.3.6.1.4.1.39145.10.106 | NodeovercurrentAlarmTrap | Trap generated when an Output Overcurrent Alarm is triggered | ||
| 1.3.6.1.4.1.39145.10.107 | NodeloadshedTrap | Trap generated when Load-Shedding is activated on an Output | ||
| 1.3.6.1.4.1.39145.10.108 | NodealarmInputTrap | Trap generated when an Alarm Input is activated | ||
| 1.3.6.1.4.1.39145.10.111 | NodesysUndervoltageAlarmClear | Trap generated when a System/Bus Undervoltage Alarm is cleared | ||
| 1.3.6.1.4.1.39145.10.112 | NodesysOvervoltageAlarmClear | Trap generated when a System/Bus Overvoltage Alarm is cleared | ||
| 1.3.6.1.4.1.39145.10.113 | NodesysOvercurrentAlarmClear | Trap generated when a System/Bus Overcurrent Alarm is cleared | ||
| 1.3.6.1.4.1.39145.10.114 | NodefuseAlarmClear | Trap generated when an Output Fuse Alarm is cleared | ||
| 1.3.6.1.4.1.39145.10.115 | NodeundercurrentAlarmClear | Trap generated when an Output Undercurrent Alarm is cleared | ||
| 1.3.6.1.4.1.39145.10.116 | NodeovercurrentAlarmClear | Trap generated when an Output Overcurrent Alarm is cleared | ||
| 1.3.6.1.4.1.39145.10.117 | NodeloadshedClear | Trap generated when an Output has recovered from a Load-Shedding condition | ||
| 1.3.6.1.4.1.39145.10.118 | NodealarmInputClear | Trap generated when an Alarm Input is cleared |