ICT-PLATINUM-SERIES-MIB
42 objects
No module-level DESCRIPTION found.
Imported Objects
| RFC-1212 | OBJECT-TYPE |
| RFC-1215 | TRAP-TYPE |
| RFC1155-SMI | enterprises IpAddress |
| RFC1213-MIB | DisplayString |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.39145 | NodeictPower | |||
| 1.3.6.1.4.1.39145.11 | NodeplatinumSeries | |||
| 1.3.6.1.4.1.39145.11.1 | ScalardeviceModel | read-only | mandatory | Model Number |
| 1.3.6.1.4.1.39145.11.2 | ScalardeviceName | read-only | mandatory | Device Name |
| 1.3.6.1.4.1.39145.11.3 | ScalardeviceHardware | read-only | mandatory | Hardware Version |
| 1.3.6.1.4.1.39145.11.4 | ScalardeviceFirmware | read-only | mandatory | Firmware Version |
| 1.3.6.1.4.1.39145.11.5 | ScalardeviceMacAddress | read-only | mandatory | MAC Address |
| 1.3.6.1.4.1.39145.11.6 | ScalarinputVoltage | read-only | mandatory | Input Voltage (VAC) |
| 1.3.6.1.4.1.39145.11.7 | ScalaroutputVoltage | read-only | mandatory | Output Voltage (VDC) |
| 1.3.6.1.4.1.39145.11.8 | ScalaroutputCurrent | read-only | mandatory | System Current (Amps) |
| 1.3.6.1.4.1.39145.11.9 | ScalaroutputEnable | read-write | mandatory | Output Enable Status (a value of '1' indicates Output is Enabled, and a value of '2' indicates Output is Disabled) |
| 1.3.6.1.4.1.39145.11.10 | ScalarbatteryVoltage | read-only | mandatory | Battery Voltage (VDC) |
| 1.3.6.1.4.1.39145.11.11 | ScalarbatteryCurrent | read-only | mandatory | Battery Current (Amps) |
| 1.3.6.1.4.1.39145.11.12 | ScalarbatteryTemperature | read-only | mandatory | Battery Temperature (�C) (a value of '1000' indicates the temperature probe is not connected) |
| 1.3.6.1.4.1.39145.11.13 | ScalarbatterySoc | read-only | mandatory | Battery State of Charge (%) |
| 1.3.6.1.4.1.39145.11.14 | ScalarbatteryNetAh | read-only | mandatory | Battery Net Ah Count (Ah) |
| 1.3.6.1.4.1.39145.11.15 | ScalarbatteryRunTime | read-only | mandatory | Estimated Run-time Remaining (min) |
| 1.3.6.1.4.1.39145.11.16 | ScalarinputVoltageX1 | read-only | mandatory | Input Voltage (VAC) |
| 1.3.6.1.4.1.39145.11.17 | ScalaroutputVoltageX100 | read-only | mandatory | Output Voltage (VDC X 100) |
| 1.3.6.1.4.1.39145.11.18 | ScalaroutputCurrentX100 | read-only | mandatory | System Current (Amps X 100) |
| 1.3.6.1.4.1.39145.11.19 | ScalarbatteryVoltageX100 | read-only | mandatory | Battery Voltage (VDC X 100) |
| 1.3.6.1.4.1.39145.11.20 | ScalarbatteryCurrentX100 | read-only | mandatory | Battery Current (Amps X 100) |
| 1.3.6.1.4.1.39145.11.101 | NodeacFailAlarmTrap | Trap generated when the AC Failure Alarm is triggered | ||
| 1.3.6.1.4.1.39145.11.102 | NodedcFailAlarmTrap | Trap generated when the DC Failure Alarm is triggered | ||
| 1.3.6.1.4.1.39145.11.103 | NodesysFailAlarmTrap | Trap generated when the System Failure Alarm is triggered | ||
| 1.3.6.1.4.1.39145.11.104 | NodeovertemperatureAlarmTrap | Trap generated when the Over-Temperature Alarm is triggered | ||
| 1.3.6.1.4.1.39145.11.105 | NodecommFailAlarmTrap | Trap generated when communications lost with a Parallel Unit | ||
| 1.3.6.1.4.1.39145.11.106 | NodefanFailAlarmTrap | Trap generated when the Fan Failure Alarm is triggered | ||
| 1.3.6.1.4.1.39145.11.107 | NodebatteryAlarmTrap | Trap generated when a Battery Alarm is triggered | ||
| 1.3.6.1.4.1.39145.11.108 | NodebatteryCurrentAlarmTrap | Trap generated when the Battery Overcurrent Alarm is triggered | ||
| 1.3.6.1.4.1.39145.11.111 | NodeacFailAlarmClear | Trap generated when the AC Failure Alarm is cleared | ||
| 1.3.6.1.4.1.39145.11.112 | NodedcFailAlarmClear | Trap generated when the DC Failure Alarm is cleared | ||
| 1.3.6.1.4.1.39145.11.113 | NodesysFailAlarmClear | Trap generated when the System Failure Alarm is cleared | ||
| 1.3.6.1.4.1.39145.11.114 | NodeovertemperatureAlarmClear | Trap generated when the Over-Temperature Alarm is cleared | ||
| 1.3.6.1.4.1.39145.11.115 | NodecommFailAlarmClear | Trap generated when the Communications Failure Alarm is cleared | ||
| 1.3.6.1.4.1.39145.11.116 | NodefanFailAlarmClear | Trap generated when the Fan Failure Alarm is cleared | ||
| 1.3.6.1.4.1.39145.11.117 | NodebatteryAlarmClear | Trap generated when the Battery Alarm is cleared | ||
| 1.3.6.1.4.1.39145.11.121 | NodebatteryTestStart | Trap generated when a Battery Discharge Test is started | ||
| 1.3.6.1.4.1.39145.11.122 | NodebatteryTestComplete | Trap generated when a Battery Discharge Test completes successfully | ||
| 1.3.6.1.4.1.39145.11.123 | NodebatteryTestFail | Trap generated when a Battery Discharge Test fails | ||
| 1.3.6.1.4.1.39145.11.124 | NodebatteryEqualizeStart | Trap generated when a Battery Equalize Charge is started | ||
| 1.3.6.1.4.1.39145.11.125 | NodebatteryEqualizeComplete | Trap generated when a Battery Equalize Charge completes |