IDKT-F2-MIB
45 objects
DKT 797xx series MIB.
Imported Objects
| DKT-MIB | dkt |
| SNMPv2-CONF | OBJECT-GROUP |
| SNMPv2-SMI | Counter32 Integer32 MODULE-IDENTITY OBJECT-TYPE |
| SNMPv2-TC | MacAddress |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.27304.15 | Identityf2MIB | DKT 797xx series MIB. | ||
| 1.3.6.1.4.1.27304.15.1 | Nodef2SwitchEngine | |||
| 1.3.6.1.4.1.27304.15.1.1 | Scalarf2IGMPSnooping | read-write | current | Starts/stops IGMP snooping, input parameter 0 = stops IGMP snooping, 1 = starts IGMP snooping. Per Default IGMP snooping is disabled. |
| 1.3.6.1.4.1.27304.15.1.2 | Scalarf2MTU | read-write | current | Set and get MTU. The following values are valid: 3072, 4096, 6144, 8960 (3k, 4k, 6k and 8960 bytes) |
| 1.3.6.1.4.1.27304.15.1.3 | Tablef2FWDTable | not-accessible | current | Get learned MAC addresses from LAN side of switch engine |
| 1.3.6.1.4.1.27304.15.1.3.1 | Rowf2FWDMacAddressEntry | not-accessible | current | Learned MAC address from LAN side of switch engine |
| 1.3.6.1.4.1.27304.15.1.3.1.1 | ColumnF2FWDMacAddress | read-only | current | MAC address from LAN |
| 1.3.6.1.4.1.27304.15.2 | Nodef2Ports | |||
| 1.3.6.1.4.1.27304.15.2.1 | Nodef2CPUPort | |||
| 1.3.6.1.4.1.27304.15.2.1.1 | Scalarf2CPUPortAutoNegotiation | read-only | current | Displays auto negotiation state for the port. |
| 1.3.6.1.4.1.27304.15.2.1.2 | Scalarf2CPUPortSpeedMode | read-only | current | Displays the speed and duplex mode on the port. |
| 1.3.6.1.4.1.27304.15.2.1.3 | Scalarf2CPUPortLinkStatus | read-only | current | Displays the Link status for the port |
| 1.3.6.1.4.1.27304.15.2.1.4 | Scalarf2CPUPortFlowControl | read-only | current | Displays flow control status for the port. Values: 0: No flow control, 1: Rx flow control, 2: Tx flow control, 3: Rx and Tx flow control |
| 1.3.6.1.4.1.27304.15.2.1.5 | Scalarf2CPUPortEnable | read-only | current | Status for CPU port. Always 1 for enabled. |
| 1.3.6.1.4.1.27304.15.2.2 | Nodef2WANPort | |||
| 1.3.6.1.4.1.27304.15.2.2.1 | Scalarf2WANPortAutoNegotiation | read-only | current | Displays auto negotiation state for the port. |
| 1.3.6.1.4.1.27304.15.2.2.2 | Scalarf2WANPortSpeedMode | read-only | current | Displays the speed and duplex mode on the port. Valid values are (1000FD|1000HD|100FD|100HD) |
| 1.3.6.1.4.1.27304.15.2.2.3 | Scalarf2WANPortLinkStatus | read-only | current | Displays the Link status for the port |
| 1.3.6.1.4.1.27304.15.2.2.4 | Scalarf2WANPortFlowControl | read-only | current | Displays flow control status for the port. Values: 0: No flow control, 1: Rx flow control, 2: Tx flow control, 3: Rx and Tx flow control |
| 1.3.6.1.4.1.27304.15.2.2.5 | Scalarf2WANPortEnable | read-only | current | Status for WAN port. Always 1 for enabled. |
| 1.3.6.1.4.1.27304.15.2.3 | Nodef2LAN1Port | |||
| 1.3.6.1.4.1.27304.15.2.3.1 | Scalarf2LAN1PortAutoNegotiation | read-only | current | Displays auto negotiation state for the port. |
| 1.3.6.1.4.1.27304.15.2.3.2 | Scalarf2LAN1PortSpeedMode | read-only | current | Displays the speed and duplex mode on the port. Valid values are (1000FD|1000HD|100FD|100HD) |
| 1.3.6.1.4.1.27304.15.2.3.3 | Scalarf2LAN1PortLinkStatus | read-only | current | Displays the Link status for the port |
| 1.3.6.1.4.1.27304.15.2.3.4 | Scalarf2LAN1PortFlowControl | read-only | current | Displays flow control status for the port. Values: 0: No flow control, 1: Rx flow control, 2: Tx flow control, 3: Rx and Tx flow control |
| 1.3.6.1.4.1.27304.15.2.3.5 | Scalarf2LAN1PortEnable | read-write | current | Enables/Disables LAN1 port. Set to 1 for Enabled set to 0 for Disabled. |
| 1.3.6.1.4.1.27304.15.2.4 | Nodef2LAN2Port | |||
| 1.3.6.1.4.1.27304.15.2.4.1 | Scalarf2LAN2PortAutoNegotiation | read-only | current | Displays auto negotiation state for the port. |
| 1.3.6.1.4.1.27304.15.2.4.2 | Scalarf2LAN2PortSpeedMode | read-only | current | Displays the speed and duplex mode on the port. Valid values are (1000FD|1000HD|100FD|100HD) |
| 1.3.6.1.4.1.27304.15.2.4.3 | Scalarf2LAN2PortLinkStatus | read-only | current | Displays the Link status for the port |
| 1.3.6.1.4.1.27304.15.2.4.4 | Scalarf2LAN2PortFlowControl | read-only | current | Displays flow control status for the port. Values: 0: No flow control, 1: Rx flow control, 2: Tx flow control, 3: Rx and Tx flow control |
| 1.3.6.1.4.1.27304.15.2.4.5 | Scalarf2LAN2PortEnable | read-write | current | Enables/Disables LAN2 port. Set to 1 for Enabled set to 0 for Disabled. |
| 1.3.6.1.4.1.27304.15.2.5 | Nodef2LAN3Port | |||
| 1.3.6.1.4.1.27304.15.2.5.1 | Scalarf2LAN3PortAutoNegotiation | read-only | current | Displays auto negotiation state for the port. |
| 1.3.6.1.4.1.27304.15.2.5.2 | Scalarf2LAN3PortSpeedMode | read-only | current | Displays the speed and duplex mode on the port. Valid values are (1000FD|1000HD|100FD|100HD) |
| 1.3.6.1.4.1.27304.15.2.5.3 | Scalarf2LAN3PortLinkStatus | read-only | current | Displays the Link status for the port |
| 1.3.6.1.4.1.27304.15.2.5.4 | Scalarf2LAN3PortFlowControl | read-only | current | Displays flow control status for the port. Values: 0: No flow control, 1: Rx flow control, 2: Tx flow control, 3: Rx and Tx flow control |
| 1.3.6.1.4.1.27304.15.2.5.5 | Scalarf2LAN3PortEnable | read-write | current | Enables/Disables LAN3 port. Set to 1 for Enabled set to 0 for Disabled. |
| 1.3.6.1.4.1.27304.15.2.6 | Nodef2LAN4Port | |||
| 1.3.6.1.4.1.27304.15.2.6.1 | Scalarf2LAN4PortAutoNegotiation | read-only | current | Displays auto negotiation state for the port. |
| 1.3.6.1.4.1.27304.15.2.6.2 | Scalarf2LAN4PortSpeedMode | read-only | current | Displays the speed and duplex mode on the port. Valid values are (1000FD|1000HD|100FD|100HD) |
| 1.3.6.1.4.1.27304.15.2.6.3 | Scalarf2LAN4PortLinkStatus | read-only | current | Displays the Link status for the port |
| 1.3.6.1.4.1.27304.15.2.6.4 | Scalarf2LAN4PortFlowControl | read-only | current | Displays flow control status for the port. Values: 0: No flow control, 1: Rx flow control, 2: Tx flow control, 3: Rx and Tx flow control |
| 1.3.6.1.4.1.27304.15.2.6.5 | Scalarf2LAN4PortEnable | read-write | current | Enables/Disables LAN4 port. Set to 1 for Enabled set to 0 for Disabled. |
| 1.3.6.1.4.1.27304.15.3 | Groupf2ModuleGroup | current | The objects are related to the DKT 797xx series module, MIB rev 09. |