MIB Viewer

IEEE-802DOT17-RPR-MIB

534 objects
The resilient packet ring MIB for IEEE 802.17. Copyright (C) IEEE802.17. This version of this MIB module is part of IEEE802.17; see the draft itself for full legal notices.
Imported Objects
HC-PerfHist-TC-MIBHCPerfCurrentCount HCPerfIntervalCount HCPerfTotalCount
IF-MIBInterfaceIndex InterfaceIndexOrZero
INET-ADDRESS-MIBInetAddress InetAddressType
SNMP-FRAMEWORK-MIBSnmpAdminString
SNMPv2-CONFMODULE-COMPLIANCE OBJECT-GROUP
SNMPv2-SMICounter32 Counter64 Integer32 MODULE-IDENTITY OBJECT-TYPE Unsigned32
SNMPv2-TCDateAndTime MacAddress TEXTUAL-CONVENTION TimeStamp TruthValue
OIDNameAccessStatusDescription
1.0.8802.17.1.1Identityieee802dot17rprMIBThe resilient packet ring MIB for IEEE 802.17. Copyright (C) IEEE802.17. This version of this MIB module is part of IEEE802.17; see the draft itself for full l…
1.0.8802.17.1.1.1NoderprObjects
1.0.8802.17.1.1.1.1NoderprGeneral
1.0.8802.17.1.1.1.1.1TablerprIfTablenot-accessiblecurrentThe RPR interface table, extension to the ifTable. All read-write attributes in this table are non-volatile, i.e. will be retained across system reset.
1.0.8802.17.1.1.1.1.1.1RowrprIfEntrynot-accessiblecurrentOne such entry for every interface in the ifTable which has an ifType of RPR interface.
1.0.8802.17.1.1.1.1.1.1.1ColumnrprIfIndexnot-accessiblecurrentThe ifIndex of this RPR interface.
1.0.8802.17.1.1.1.1.1.1.2ColumnrprIfStationsOnRingread-onlycurrentThe number of stations on the RPR ring. When the operStatus of the interface is down the value is 1.
1.0.8802.17.1.1.1.1.1.1.3ColumnrprIfReversionModeread-writecurrentThe reversion mode of the MAC, False for non-revertive True for revertive. Revertive station will return to idle state after WTR interval expires. Default valu…
1.0.8802.17.1.1.1.1.1.1.4ColumnrprIfProtectionWTRread-writecurrentIndicates the length of time in seconds, to remain in the protection state, after the cause of an automatic protection is removed. This mechanism prevents prot…
1.0.8802.17.1.1.1.1.1.1.5ColumnrprIfProtectionFastTimerread-writecurrentIndicates the protection messages fast timer value in 1 ms units. The fast timer is used for protection protocols. Default value for fast timer protection mess…
1.0.8802.17.1.1.1.1.1.1.6ColumnrprIfProtectionSlowTimerread-writecurrentIndicates the protection slow timer value in 50 ms units. The slow timer is used for topology and protection protocols. Default value for slow timer protection…
1.0.8802.17.1.1.1.1.1.1.7ColumnrprIfAtdTimerread-writecurrentIndicates the timer period for ATD message transmissions. Default value is 20 units of 50 ms, i.e. 1sec.
1.0.8802.17.1.1.1.1.1.1.8ColumnrprIfKeepaliveTimeoutread-writecurrentIndicates the timer to declare keepalive timeout, multiples of 1 millisecond. Default value for keepalive timeout is 3 ms.
1.0.8802.17.1.1.1.1.1.1.9ColumnrprIfFairnessAggressiveread-writecurrentIndicates whether the selected RPR fairness algorithm is aggressive or conservative. If true, the selected fairness mode is aggressive. If false, the selected …
1.0.8802.17.1.1.1.1.1.1.10ColumnrprIfPtqSizeread-onlycurrentThe size in bytes of the Primary Transit Queue per ringlet supported by this RPR MAC.
1.0.8802.17.1.1.1.1.1.1.11ColumnrprIfStqSizeread-onlycurrentThe size in bytes of the Secondary Transit Queue per ringlet supported by this RPR MAC.
1.0.8802.17.1.1.1.1.1.1.12ColumnrprIfSTQFullThresholdread-writecurrentA level of STQ occupancy at or above which the STQ is almost full. This attribute specifies the full threshold location in MTU units below the STQ size. The ra…
1.0.8802.17.1.1.1.1.1.1.13ColumnrprIfIdleThresholdread-writecurrentIndicates that a MAC is experiencing an adverse rate mismatch. When the PTQ depth exceeds this value, the incoming link is considered adversely rate mismatched…
1.0.8802.17.1.1.1.1.1.1.14ColumnrprIfSesThresholdread-writecurrentIndicates the number of E-RPR errors to declare a second as SES-RPR The default value is the rounded integer of 0.000001 * (lineRate * advertisementRatio).
1.0.8802.17.1.1.1.1.1.1.15ColumnrprIfWrapConfigread-writecurrentIndicates the configured protection mode, steering or wrapping, in a MAC that supports both modes. If wrap configured bit is set, the station will perform wrap…
1.0.8802.17.1.1.1.1.1.1.16ColumnrprIfJumboFramePreferredread-writecurrentIndicates the preference of the manager to support jumbo frame in a MAC that supports jumbo frame. The station advertises the 'logical and' of rprIfJumboFrameP…
1.0.8802.17.1.1.1.1.1.1.17ColumnrprIfMacOperModesread-onlycurrentThe summary of the Mac operational modes. if strictOrder is set, the MAC operates in strict order mode. if dropBadFcs is set, frames with bad FCS are dropped.
1.0.8802.17.1.1.1.1.1.1.18ColumnrprIfRingOperModesread-onlycurrentThe summary of the ring operational modes collected through the topology discovery protocol. If at least one station doesn't support jumbo frames, the jumboFra…
1.0.8802.17.1.1.1.1.1.1.19ColumnrprIfCurrentStatusread-onlycurrentIndicates the current status of the RPR interface. this attribute is used to generate alarm to the management system.
1.0.8802.17.1.1.1.1.1.1.20ColumnrprIfLastChangeread-onlycurrentThe value of sysUpTime at the time when any of the following attributes changes: rprIfStationsOnRing, rprIfReversionMode, rprIfProtectionWTR, rprIfProtectionFa…
1.0.8802.17.1.1.1.1.1.1.21ColumnrprIfChangesread-onlycurrentIndicates number of times rprIfLastChange changed. The discontinued counter value is indicated by the ifCounterDiscontinuityTime value.
1.0.8802.17.1.1.1.1.2TablerprIfStatsControlTablenot-accessiblecurrentThe RPR statistics management table, controls the collection, duration, clearance, and status of the MAC statistics. The usage of this table is as follows: 1. …
1.0.8802.17.1.1.1.1.2.1RowrprIfStatsControlEntrynot-accessiblecurrentOne such entry for every interface in the ifTable which has an ifType of RPR interface.
1.0.8802.17.1.1.1.1.2.1.1ColumnrprIfStatsControlIfIndexnot-accessiblecurrentThe ifIndex of this RPR interface.
1.0.8802.17.1.1.1.1.2.1.2ColumnrprIfStatsControlPeriodClearread-writecurrentThis attribute allows for some or all of the interval statistics for this RPR MAC to be cleared. It does not affect the values of the running counters or the c…
1.0.8802.17.1.1.1.1.2.1.3ColumnrprIfStatsControlCountPointClearread-writecurrentThis attribute allows for a specific counting point of the RPR MAC or all of the RPR MAC counting points to be cleared on rprIfStatsControlPeriodClear request.…
1.0.8802.17.1.1.1.1.2.1.4ColumnrprIfStatsControlIntervalClearread-writecurrentThe statistics interval number to clear. The interval identified by 1 is the most recently completed 15 minute interval, and interval identified by N is the in…
1.0.8802.17.1.1.1.1.2.1.5ColumnrprIfStatsControlCommitClearread-writecurrentSends a commit with input parameters to specify the Period (rprIfStatsControlPeriodClear), count point (rprIfStatsControlCountPointClear) and specific interval…
1.0.8802.17.1.1.1.1.2.1.6ColumnrprIfStatsControlTimeElapsedread-onlycurrentThe number of seconds, including partial seconds, that have elapsed since the beginning of the current measurement interval. If, for some reason, such as an ad…
1.0.8802.17.1.1.1.1.2.1.7ColumnrprIfStatsControlValidIntervalsread-onlycurrentThe number of previous 15-minute intervals for which data was collected. An RPR interface must be capable of supporting at least n intervals. The minimum value…
1.0.8802.17.1.1.1.1.3TablerprSpanTablenot-accessiblecurrentThe RPR interface Span table. All read-write attributes in this table are non-volatile, i.e. will be retained across system reset.
1.0.8802.17.1.1.1.1.3.1RowrprSpanEntrynot-accessiblecurrentOne such entry for every span of an RPR interface.
1.0.8802.17.1.1.1.1.3.1.1ColumnrprSpanIfIndexnot-accessiblecurrentThe ifIndex of this RPR interface.
1.0.8802.17.1.1.1.1.3.1.2ColumnrprSpanIdnot-accessiblecurrentIndicates the span interface of the RPR MAC. Each RPR span is connected to both ringlet0 and ringlet1. The east span receives from ringlet1 and transmits throu…
1.0.8802.17.1.1.1.1.3.1.3ColumnrprSpanLowerLayerIfIndexread-onlycurrentThe ifIndex of interface which is below the RPR layer in this span. A value of zero indicates an interface index that has yet to be determined
1.0.8802.17.1.1.1.1.3.1.4ColumnrprSpanTotalRingletReservedRateread-onlycurrentThe total reserved subclassA0 bandwidth on the ringlet. This variable is used by the fairness module to determine the total reclaimable bandwidth.
1.0.8802.17.1.1.1.1.3.1.5ColumnrprSpanCurrentStatusread-onlycurrentIndicates the current status of the RPR span. this attribute is used to generate alarm to the management system.
1.0.8802.17.1.1.1.1.3.1.6ColumnrprSpanLastChangeread-onlycurrentThe value of sysUpTime at the time when any of the following attributes changes: rprSpanCurrentStatus, rprSpanProtectionNeighborValid, rprSpanProtectionHoldOff…
1.0.8802.17.1.1.1.1.3.1.7ColumnrprSpanChangesread-onlycurrentIndicates number of times rprSpanLastChange changed. The discontinued counter value is indicated by the ifCounterDiscontinuityTime value.
1.0.8802.17.1.1.1.1.4TablerprSpanProtectionTablenot-accessiblecurrentThe RPR interface Span protection management table. All read-write attributes in this table are non-volatile, i.e. will be retained across system reset.
1.0.8802.17.1.1.1.1.4.1RowrprSpanProtectionEntrynot-accessiblecurrentOne such entry for every span of an RPR interface.
1.0.8802.17.1.1.1.1.4.1.1ColumnrprSpanProtectionIfIndexnot-accessiblecurrentThe ifIndex of this RPR interface.
1.0.8802.17.1.1.1.1.4.1.2ColumnrprSpanProtectionSpannot-accessiblecurrentThe Span for this entry.
1.0.8802.17.1.1.1.1.4.1.3ColumnrprSpanProtectionNeighborValidread-onlycurrentIndicates whether the neighbor address is active or former. true value for active, false for former
1.0.8802.17.1.1.1.1.4.1.4ColumnrprSpanProtectionHoldOffTimerread-writecurrentThe period that RPR gives to lower layer to perform protection, before it activates its protection mechanism. Default value of hold off timer is 0.
1.0.8802.17.1.1.1.1.4.1.5ColumnrprSpanProtectionCommandread-writecurrentThe protection mode requested by management for the local station that can affect the protection status of the RPR station, according to the set of rules descr…
1.0.8802.17.1.1.1.1.4.1.6ColumnrprSpanProtectionCountread-onlycurrentThe number of transitions from idle state to active protection state. The discontinued counter value is indicated by the ifCounterDiscontinuityTime value.
1.0.8802.17.1.1.1.1.4.1.7ColumnrprSpanProtectionDurationread-onlycurrentThe total amount of time protection was active on the span interface. The discontinued counter value is indicated by the ifCounterDiscontinuityTime value.
1.0.8802.17.1.1.1.1.4.1.8ColumnrprSpanProtectionLastActivationTimeread-onlycurrentThe value of sysUpTime at the time of the last protection activation.
1.0.8802.17.1.1.1.1.5NoderprIfChangeSummaryObject
1.0.8802.17.1.1.1.1.5.1ScalarrprIfChangeSummaryNumInterfacesread-onlycurrentNumber of RPR interfaces on this device.
1.0.8802.17.1.1.1.1.5.2ScalarrprIfChangeSummaryIfLastChangeread-onlycurrentLatest timestamp when any instance of rprIfLastChange changed.
1.0.8802.17.1.1.1.1.5.3ScalarrprIfChangeSummaryIfChangesread-onlycurrentNumber of times any instance of rprIfChanges changed. The discontinued counter value is indicated by the ifCounterDiscontinuityTime value.
1.0.8802.17.1.1.1.1.5.4ScalarrprIfChangeSummarySpanLastChangeread-onlycurrentLatest timestamp when any instance of rprSpanLastChange changed.
1.0.8802.17.1.1.1.1.5.5ScalarrprIfChangeSummarySpanChangesread-onlycurrentNumber of times any instance of rprSpanChanges changed. The discontinued counter value is indicated by the ifCounterDiscontinuityTime value.
1.0.8802.17.1.1.1.1.5.6ScalarrprIfChangeSummaryFairnessLastChangeread-onlycurrentLatest timestamp when any instance of rprFairnessLastChange changed.
1.0.8802.17.1.1.1.1.5.7ScalarrprIfChangeSummaryFairnessChangesread-onlycurrentNumber of times any instance of rprFairnessChanges changed. The discontinued counter value is indicated by the ifCounterDiscontinuityTime value.
1.0.8802.17.1.1.1.2NoderprProtocols
1.0.8802.17.1.1.1.2.1TablerprTopoImageTablenot-accessiblecurrentA topology map that details the list of stations on the RPR ringlets. All attributes in this table are volatile, i.e. will be cleared on system reset.
1.0.8802.17.1.1.1.2.1.1RowrprTopoImageEntrynot-accessiblecurrentEach entry contains information specific to a particular station on the ring. The table has at least one entry for the station itself, this entry indicates zer…
1.0.8802.17.1.1.1.2.1.1.1ColumnrprTopoImageIfIndexnot-accessiblecurrentThe ifIndex of this RPR interface.
1.0.8802.17.1.1.1.2.1.1.2ColumnrprTopoImageMacAddressnot-accessiblecurrentThe 48-bit MAC address of the station.
1.0.8802.17.1.1.1.2.1.1.3ColumnrprTopoImageSecMacAddress1read-onlycurrentThe 48-bit first secondary MAC address of the station. Default and unused value is FF:FF:FF:FF:FF:FF
1.0.8802.17.1.1.1.2.1.1.4ColumnrprTopoImageSecMacAddress2read-onlycurrentThe 48-bit second secondary MAC address of the station. Default and unused value is FF:FF:FF:FF:FF:FF
1.0.8802.17.1.1.1.2.1.1.5ColumnrprTopoImageStationIfIndexread-onlycurrentThe station ifIndex.
1.0.8802.17.1.1.1.2.1.1.6ColumnrprTopoImageStationNameread-onlycurrentThe operator assigned station name.
1.0.8802.17.1.1.1.2.1.1.7ColumnrprTopoImageInetAddressTyperead-onlycurrentDenotes the address type of the station INET address It should be set to 'unknown' if station INET address is not known.
1.0.8802.17.1.1.1.2.1.1.8ColumnrprTopoImageInetAddressread-onlycurrentThis object contains the value of of the station IP (v4 or V6) address. The format of this address is specified by the value of the corresponding rprTopoImageI…
1.0.8802.17.1.1.1.2.1.1.9ColumnrprTopoImageCapabilityread-onlycurrentIndicates the capabilities that the MAC supports. jumboFrames - Indicates whether the MAC capable of receiving, transmitting and transiting jumbo frames. wrapP…
1.0.8802.17.1.1.1.2.1.1.10ColumnrprTopoImageRinglet0Hopsread-onlycurrentThe number of hops to this station through ringlet0. The self station is indicated with zero hops. A non reachable station is indicated with -1 value.
1.0.8802.17.1.1.1.2.1.1.11ColumnrprTopoImageRinglet0ReservedRateread-onlycurrentThe amount of A0 traffic that this station adds on ringlet0, in Mb/s units.
1.0.8802.17.1.1.1.2.1.1.12ColumnrprTopoImageRinglet1Hopsread-onlycurrentThe number of hops to this station through ringlet1. The self station is indicated with zero hops. A non reachable station is indicated with -1 value.
1.0.8802.17.1.1.1.2.1.1.13ColumnrprTopoImageRinglet1ReservedRateread-onlycurrentThe amount of A0 traffic that this station adds on ringlet1, in Mb/s units.
1.0.8802.17.1.1.1.2.1.1.14ColumnrprTopoImageWestProtectionStatusread-onlycurrentThe current protection status of the West span.
1.0.8802.17.1.1.1.2.1.1.15ColumnrprTopoImageWestWeightread-onlycurrentThe weight of the station on the west span. used for weighted fairness.
1.0.8802.17.1.1.1.2.1.1.16ColumnrprTopoImageEastProtectionStatusread-onlycurrentThe current protection status of the east span.
1.0.8802.17.1.1.1.2.1.1.17ColumnrprTopoImageEastWeightread-onlycurrentThe weight of the station on the east span. Used for weighted fairness.
1.0.8802.17.1.1.1.2.1.1.18ColumnrprTopoImageStatusread-onlycurrentStatus of the station, the reachability of station through ringlet0 and ringlet1, wrap active on the station spans, events of reception frames with bad FCS, ev…
1.0.8802.17.1.1.1.2.2TablerprFairnessTablenot-accessiblecurrentA table of RPR Fairness per RPR span. All read-write attributes in this table are non-volatile, i.e. will be retained across system reset.
1.0.8802.17.1.1.1.2.2.1RowrprFairnessEntrynot-accessiblecurrentA fairness parameters for a particular ringlet of the an RPR interface.
1.0.8802.17.1.1.1.2.2.1.1ColumnrprFairnessIfIndexnot-accessiblecurrentThe ifIndex of this RPR interface.
1.0.8802.17.1.1.1.2.2.1.2ColumnrprFairnessRingletnot-accessiblecurrentThe ringlet for which this row contains information. ringlet0 is the transmission of the east span and the reception of the west span, ringlet1 is the transmis…
1.0.8802.17.1.1.1.2.2.1.3ColumnrprFairnessRingletWeightread-writecurrentWeight assigned to fairness to permit the scaling of fair rate values among stations on the ringlet. This allows one station to use a larger share of available…
1.0.8802.17.1.1.1.2.2.1.4ColumnrprFairnessReservedRateread-writecurrentThe amount of A0 traffic that this station adds that ringlet, in Mb/s units. Default value for A0 reserved rate is 0 Mb/s.
1.0.8802.17.1.1.1.2.2.1.5ColumnrprFairnessMaxAllowedread-writecurrentThe maximum value that the station is allowed to transmit local excess traffic to the ringlet. The default value is the physical ring rate.
1.0.8802.17.1.1.1.2.2.1.6ColumnrprFairnessAgeCoefread-writecurrentThe coefficient used by the aging procedure to specify the relative weights assigned to (a) the change in the value of a rate-counter during the most recent ag…
1.0.8802.17.1.1.1.2.2.1.7ColumnrprFairnessRampCoefread-writecurrentThe coefficient used for ramping a rate. The value is interpreted as 2 raised to the power specified by this attribute. The default value is 6, giving a low-pa…
1.0.8802.17.1.1.1.2.2.1.8ColumnrprFairnessLpCoefread-writecurrentThe coefficient used by the low-pass filter procedure to specify the relative weights applied to (a) the increase in the rate-count value during the most recen…
1.0.8802.17.1.1.1.2.2.1.9ColumnrprFairnessAdvertisementRatioread-writecurrentThe ratio between the link capacity reserved for fairness control messages and the total link capacity. Default value of fairness advertisement ratio is 5 unit…
1.0.8802.17.1.1.1.2.2.1.10ColumnrprFairnessMcffReportCoefread-writecurrentIndicates the number of SCFF advertisingIntervals that elapse between the sending of successive MCFFs, This value allows the interval between sending MCFFs to …
1.0.8802.17.1.1.1.2.2.1.11ColumnrprFairnessActiveWeightsCoefread-writecurrentIndicates the number of agingIntervals that elapse between successive computations of activeWeights. This value allows the interval between computations of act…
1.0.8802.17.1.1.1.2.2.1.12ColumnrprFairnessSTQHighThresholdread-writecurrentA level of STQ occupancy at or above which CSFE frames are no longer admitted. Defined only for a dual transit-queue implementation. This attribute specifies t…
1.0.8802.17.1.1.1.2.2.1.13ColumnrprFairnessSTQMedThresholdread-writecurrentA level of buffer occupancy in a dual-queue deployment, at or above which congestion on the outbound link is declared. This attribute specifies the medium thre…
1.0.8802.17.1.1.1.2.2.1.14ColumnrprFairnessSTQLowThresholdread-writecurrentA level of STQ occupancy at or above which congestion on the outbound link is imminent. Defined only for dual transit-queue implementations. This attribute spe…
1.0.8802.17.1.1.1.2.2.1.15ColumnrprFairnessRateHighThresholdread-writecurrentRate at or above which congestion on the outbound link is declared. The range is [0.4 * unreservedRate, 0.99 * unreservedRate]. The default value is 0.95 * unr…
1.0.8802.17.1.1.1.2.2.1.16ColumnrprFairnessRateLowThresholdread-writecurrentRate at or above which congestion on the outbound link is imminent. The range is [0.5 * rateHighThreshold, 0.99 * rateHighThreshold]. The default value is 0.9 …
1.0.8802.17.1.1.1.2.2.1.17ColumnrprFairnessResetWaterMarksread-writecurrentWrite resetWaterMarks to this attribute to reset the STQ water marks to the current occupancy. Default value is idle
1.0.8802.17.1.1.1.2.2.1.18ColumnrprFairnessSTQHighWaterMarkread-onlycurrentThe highest level of STQ occupancy since the last reset of this value, in percentage of the STQ size.
1.0.8802.17.1.1.1.2.2.1.19ColumnrprFairnessSTQLowWaterMarkread-onlycurrentThe lowest level of STQ occupancy since the last reset of this value, in percentage of the STQ size.
1.0.8802.17.1.1.1.2.2.1.20ColumnrprFairnessLastChangeread-onlycurrentThe value of sysUpTime at the time when any of the following attributes changes: rprFairnessRingletWeight, rprFairnessReservedRate, rprFairnessMaxAllowed, rprF…
1.0.8802.17.1.1.1.2.2.1.21ColumnrprFairnessChangesread-onlycurrentIndicates number of times rprFairnessLastChange changed. The discontinued counter value is indicated by the ifCounterDiscontinuityTime value.
1.0.8802.17.1.1.1.2.3TablerprOamTablenot-accessiblecurrentA table of RPR OAM actions. The table is designed to support a one action at a time on an RPR interface. All read-write attributes in this table are volatile, …
1.0.8802.17.1.1.1.2.3.1RowrprOamEntrynot-accessiblecurrentOAM Echo and Flush control for an RPR interface
1.0.8802.17.1.1.1.2.3.1.1ColumnrprOamIfIndexnot-accessiblecurrentThe ifIndex of this RPR interface.
1.0.8802.17.1.1.1.2.3.1.2ColumnrprOamActionTyperead-writecurrentThe type of OAM action. The valid values for this object are: (1) echo (2) flush.
1.0.8802.17.1.1.1.2.3.1.3ColumnrprOamDestAddressread-writecurrentThe 48-bit MAC address of the destination station of OAM session.
1.0.8802.17.1.1.1.2.3.1.4ColumnrprOamRequestRingletread-writecurrentThe ringlet ID on which the OAM request should be sent.
1.0.8802.17.1.1.1.2.3.1.5ColumnrprOamResponseRingletread-writecurrentThe ringlet ID on which the OAM response should be replied.
1.0.8802.17.1.1.1.2.3.1.6ColumnrprOamClassOfServiceread-writecurrentThe class-of-service of OAM session frames
1.0.8802.17.1.1.1.2.3.1.7ColumnrprOamUserDataread-writecurrentThe operator assigned user specific data.
1.0.8802.17.1.1.1.2.3.1.8ColumnrprOamProtectedread-writecurrentIndicates whether the OAM action should be protected. In a wrapping ring, If true, the WE (wrap eligible) bit of the OAM action frame is set to 1. Otherwise, t…
1.0.8802.17.1.1.1.2.3.1.9ColumnrprOamRequestCountread-writecurrentIndicates the number of OAM requests to send. Default value of OAM request action is 1.
1.0.8802.17.1.1.1.2.3.1.10ColumnrprOamTimeoutread-writecurrentIndicates the timer to declare OAM action timeout, in 10usec units. Default value of OAM timeout is 500 units of 10usec (i.e. 5 ms)
1.0.8802.17.1.1.1.2.3.1.11ColumnrprOamControlread-writecurrentControl of an OAM action. The valid values for this object are: (1) idle (2) active (3) abort. Default value of OAM control is idle.
1.0.8802.17.1.1.1.2.3.1.12ColumnrprOamResponseCountread-onlycurrentIndicates the number of OAM actions responses received.
1.0.8802.17.1.1.1.2.3.1.13ColumnrprOamAvResponseTimeread-onlycurrentAverage response time to receive the OAM reply.
1.0.8802.17.1.1.1.2.3.1.14ColumnrprOamResponseStatusread-onlycurrentStatus of an OAM action. The valid values for this object are: (1) unknown (2) inProcess (3) error (4) success. The action status is success if at least 90% of…
1.0.8802.17.1.1.1.3NoderprSpanCounters
1.0.8802.17.1.1.1.3.1TablerprSpanCountersCurrentTablenot-accessiblecurrentThe RPR MAC Span interface current counters table. All attributes in this table are volatile, i.e. will be cleared on system reset.
1.0.8802.17.1.1.1.3.1.1RowrprSpanCountersCurrentEntrynot-accessiblecurrentFrames and octets statistics for the current interval for the RPR MAC Span interface. The corresponding instance of rprIfStatsControlTimeElapsed indicates the …
1.0.8802.17.1.1.1.3.1.1.1ColumnrprSpanCurrentIfIndexnot-accessiblecurrentThe ifIndex of this RPR interface.
1.0.8802.17.1.1.1.3.1.1.2ColumnrprSpanCurrentSpannot-accessiblecurrentAn indication of the span of the interface for which this row contains information.
1.0.8802.17.1.1.1.3.1.1.3ColumnrprSpanCurrentInUcastClassAFramesread-onlycurrentThe number of received (PHY to MAC) classA unicast frames in the current interval.
1.0.8802.17.1.1.1.3.1.1.4ColumnrprSpanCurrentInUcastClassAOctetsread-onlycurrentThe number of received (PHY to MAC) classA unicast octets, in the current interval.
1.0.8802.17.1.1.1.3.1.1.5ColumnrprSpanCurrentInUcastClassBCirFramesread-onlycurrentThe number of received (PHY to MAC) classB CIR unicast frames in the current interval.
1.0.8802.17.1.1.1.3.1.1.6ColumnrprSpanCurrentInUcastClassBCirOctetsread-onlycurrentThe number of received (PHY to MAC) classB CIR unicast octets in the current interval.
1.0.8802.17.1.1.1.3.1.1.7ColumnrprSpanCurrentInUcastClassBEirFramesread-onlycurrentThe number of received (PHY to MAC) classB EIR unicast frames in the current interval.
1.0.8802.17.1.1.1.3.1.1.8ColumnrprSpanCurrentInUcastClassBEirOctetsread-onlycurrentThe number of received (PHY to MAC) classB EIR unicast octets in the current interval.
1.0.8802.17.1.1.1.3.1.1.9ColumnrprSpanCurrentInUcastClassCFramesread-onlycurrentThe number of received (PHY to MAC) classC unicast frames in the current interval.
1.0.8802.17.1.1.1.3.1.1.10ColumnrprSpanCurrentInUcastClassCOctetsread-onlycurrentThe number of received (PHY to MAC) classC unicast octets in the current interval.
1.0.8802.17.1.1.1.3.1.1.11ColumnrprSpanCurrentInMcastClassAFramesread-onlycurrentThe number of received (PHY to MAC) classA multicast and broadcast frames in the current interval.
1.0.8802.17.1.1.1.3.1.1.12ColumnrprSpanCurrentInMcastClassAOctetsread-onlycurrentThe number of received (PHY to MAC) classA multicast and broadcast octets in the current interval.
1.0.8802.17.1.1.1.3.1.1.13ColumnrprSpanCurrentInMcastClassBCirFramesread-onlycurrentThe number of received (PHY to MAC) classB CIR multicast and broadcast frames in the current interval.
1.0.8802.17.1.1.1.3.1.1.14ColumnrprSpanCurrentInMcastClassBCirOctetsread-onlycurrentThe number of received (PHY to MAC) classB CIR multicast and broadcast octets in the current interval.
1.0.8802.17.1.1.1.3.1.1.15ColumnrprSpanCurrentInMcastClassBEirFramesread-onlycurrentThe number of received (PHY to MAC) classB EIR multicast and broadcast frames in the current interval.
1.0.8802.17.1.1.1.3.1.1.16ColumnrprSpanCurrentInMcastClassBEirOctetsread-onlycurrentThe number of received (PHY to MAC) classB EIR multicast and broadcast octets in the current interval.
1.0.8802.17.1.1.1.3.1.1.17ColumnrprSpanCurrentInMcastClassCFramesread-onlycurrentThe number of received (PHY to MAC) classC multicast and broadcast frames in the current interval.
1.0.8802.17.1.1.1.3.1.1.18ColumnrprSpanCurrentInMcastClassCOctetsread-onlycurrentThe number of received (PHY to MAC) classC multicast and broadcast octets in the current interval.
1.0.8802.17.1.1.1.3.1.1.19ColumnrprSpanCurrentOutUcastClassAFramesread-onlycurrentThe number of transmitted (MAC to PHY) classA unicast frames in the current interval.
1.0.8802.17.1.1.1.3.1.1.20ColumnrprSpanCurrentOutUcastClassAOctetsread-onlycurrentThe number of transmitted (MAC to PHY) classA unicast octets in the current interval.
1.0.8802.17.1.1.1.3.1.1.21ColumnrprSpanCurrentOutUcastClassBCirFramesread-onlycurrentThe number of transmitted (MAC to PHY) classB CIR unicast frames in the current interval.
1.0.8802.17.1.1.1.3.1.1.22ColumnrprSpanCurrentOutUcastClassBCirOctetsread-onlycurrentThe number of transmitted (MAC to PHY) classB CIR unicast octets in the current interval.
1.0.8802.17.1.1.1.3.1.1.23ColumnrprSpanCurrentOutUcastClassBEirFramesread-onlycurrentThe number of transmitted (MAC to PHY) classB EIR unicast frames in the current interval.
1.0.8802.17.1.1.1.3.1.1.24ColumnrprSpanCurrentOutUcastClassBEirOctetsread-onlycurrentThe number of transmitted (MAC to PHY) classB EIR unicast octets in the current interval.
1.0.8802.17.1.1.1.3.1.1.25ColumnrprSpanCurrentOutUcastClassCFramesread-onlycurrentThe number of transmitted (MAC to PHY) classC unicast frames in the current interval.
1.0.8802.17.1.1.1.3.1.1.26ColumnrprSpanCurrentOutUcastClassCOctetsread-onlycurrentThe number of transmitted (MAC to PHY) classC unicast octets in the current interval.
1.0.8802.17.1.1.1.3.1.1.27ColumnrprSpanCurrentOutMcastClassAFramesread-onlycurrentThe number of transmitted (MAC to PHY) classA multicast and broadcast frames in the current interval.
1.0.8802.17.1.1.1.3.1.1.28ColumnrprSpanCurrentOutMcastClassAOctetsread-onlycurrentThe number of transmitted (MAC to PHY) classA multicast and broadcast octets in the current interval.
1.0.8802.17.1.1.1.3.1.1.29ColumnrprSpanCurrentOutMcastClassBCirFramesread-onlycurrentThe number of transmitted (MAC to PHY) classB CIR multicast and broadcast frames in the current interval.
1.0.8802.17.1.1.1.3.1.1.30ColumnrprSpanCurrentOutMcastClassBCirOctetsread-onlycurrentThe number of transmitted (MAC to PHY) classB CIR multicast and broadcast octets in the current interval.
1.0.8802.17.1.1.1.3.1.1.31ColumnrprSpanCurrentOutMcastClassBEirFramesread-onlycurrentThe number of transmitted (MAC to PHY) classB EIR multicast and broadcast frames in the current interval.
1.0.8802.17.1.1.1.3.1.1.32ColumnrprSpanCurrentOutMcastClassBEirOctetsread-onlycurrentThe number of transmitted (MAC to PHY) classB EIR multicast and broadcast octets in the current interval.
1.0.8802.17.1.1.1.3.1.1.33ColumnrprSpanCurrentOutMcastClassCFramesread-onlycurrentThe number of transmitted (MAC to PHY) classC multicast and broadcast frames in the current interval.
1.0.8802.17.1.1.1.3.1.1.34ColumnrprSpanCurrentOutMcastClassCOctetsread-onlycurrentThe number of transmitted (MAC to PHY) classC multicast and broadcast octets in the current interval.
1.0.8802.17.1.1.1.3.2TablerprSpanCountersIntervalTablenot-accessiblecurrentThe RPR MAC Span interface interval counters table. All attributes in this table are volatile, i.e. will be cleared on system reset.
1.0.8802.17.1.1.1.3.2.1RowrprSpanCountersIntervalEntrynot-accessiblecurrentFrames and octets statistics collected for a particular interval for the RPR MAC Span interface of a particular span of a particular RPR interface. The corresp…
1.0.8802.17.1.1.1.3.2.1.1ColumnrprSpanIntervalIfIndexnot-accessiblecurrentThe ifIndex of this RPR interface.
1.0.8802.17.1.1.1.3.2.1.2ColumnrprSpanIntervalSpannot-accessiblecurrentAn indication of the span of the interface for which this row contains information.
1.0.8802.17.1.1.1.3.2.1.3ColumnrprSpanIntervalNumbernot-accessiblecurrentA number between 1 and 96, which identifies the intervals for which the set of statistics is available. The interval identified by 1 is the most recently compl…
1.0.8802.17.1.1.1.3.2.1.4ColumnrprSpanIntervalValidDataread-onlycurrentThis variable indicates if the data for this interval is valid. It will be valid if it contains data for 900 seconds plus or minus 10 seconds.
1.0.8802.17.1.1.1.3.2.1.5ColumnrprSpanIntervalTimeElapsedread-onlycurrentThe duration of a particular interval in seconds. If, for some reason, such as an adjustment in the system's time-of-day clock, the current interval exceeds th…
1.0.8802.17.1.1.1.3.2.1.6ColumnrprSpanIntervalStartTimeread-onlycurrentIndicates the wall clock time that this interval started.
1.0.8802.17.1.1.1.3.2.1.7ColumnrprSpanIntervalInUcastClassAFramesread-onlycurrentThe number of received (PHY to MAC) classA unicast frames in a particular interval in the past 24 hours.
1.0.8802.17.1.1.1.3.2.1.8ColumnrprSpanIntervalInUcastClassAOctetsread-onlycurrentThe number of received (PHY to MAC) classA unicast octets in a particular interval in the past 24 hours.
1.0.8802.17.1.1.1.3.2.1.9ColumnrprSpanIntervalInUcastClassBCirFramesread-onlycurrentThe number of received (PHY to MAC) classB CIR unicast frames in a particular interval in the past 24 hours.
1.0.8802.17.1.1.1.3.2.1.10ColumnrprSpanIntervalInUcastClassBCirOctetsread-onlycurrentThe number of received (PHY to MAC) classB CIR unicast octets in a particular interval in the past 24 hours.
1.0.8802.17.1.1.1.3.2.1.11ColumnrprSpanIntervalInUcastClassBEirFramesread-onlycurrentThe number of received (PHY to MAC) classB EIR unicast frames in a particular interval in the past 24 hours.
1.0.8802.17.1.1.1.3.2.1.12ColumnrprSpanIntervalInUcastClassBEirOctetsread-onlycurrentThe number of received (PHY to MAC) classB EIR unicast octets in a particular interval in the past 24 hours.
1.0.8802.17.1.1.1.3.2.1.13ColumnrprSpanIntervalInUcastClassCFramesread-onlycurrentThe number of received (PHY to MAC) classC unicast frames in a particular interval in the past 24 hours.
1.0.8802.17.1.1.1.3.2.1.14ColumnrprSpanIntervalInUcastClassCOctetsread-onlycurrentThe number of received (PHY to MAC) classC unicast octets in a particular interval in the past 24 hours.
1.0.8802.17.1.1.1.3.2.1.15ColumnrprSpanIntervalInMcastClassAFramesread-onlycurrentThe number of received (PHY to MAC) classA multicast and broadcast frames in a particular interval in the past 24 hours.
1.0.8802.17.1.1.1.3.2.1.16ColumnrprSpanIntervalInMcastClassAOctetsread-onlycurrentThe number of received (PHY to MAC) classA multicast and broadcast octets in a particular interval in the past 24 hours.
1.0.8802.17.1.1.1.3.2.1.17ColumnrprSpanIntervalInMcastClassBCirFramesread-onlycurrentThe number of received (PHY to MAC) classB CIR multicast and broadcast frames in a particular interval in the past 24 hours.
1.0.8802.17.1.1.1.3.2.1.18ColumnrprSpanIntervalInMcastClassBCirOctetsread-onlycurrentThe number of received (PHY to MAC) classB CIR multicast and broadcast octets in a particular interval in the past 24 hours.
1.0.8802.17.1.1.1.3.2.1.19ColumnrprSpanIntervalInMcastClassBEirFramesread-onlycurrentThe number of received (PHY to MAC) classB EIR multicast and broadcast frames in a particular interval in the past 24 hours.
1.0.8802.17.1.1.1.3.2.1.20ColumnrprSpanIntervalInMcastClassBEirOctetsread-onlycurrentThe number of received (PHY to MAC) classB EIR multicast and broadcast octets in a particular interval in the past 24 hours.
1.0.8802.17.1.1.1.3.2.1.21ColumnrprSpanIntervalInMcastClassCFramesread-onlycurrentThe number of received (PHY to MAC) classC multicast and broadcast frames in a particular interval in the past 24 hours.
1.0.8802.17.1.1.1.3.2.1.22ColumnrprSpanIntervalInMcastClassCOctetsread-onlycurrentThe number of received (PHY to MAC) classC multicast and broadcast octets in a particular interval in the past 24 hours.
1.0.8802.17.1.1.1.3.2.1.23ColumnrprSpanIntervalOutUcastClassAFramesread-onlycurrentThe number of transmitted (MAC to PHY) classA unicast frames in a particular interval in the past 24 hours.
1.0.8802.17.1.1.1.3.2.1.24ColumnrprSpanIntervalOutUcastClassAOctetsread-onlycurrentThe number of transmitted (MAC to PHY) classA unicast octets in a particular interval in the past 24 hours.
1.0.8802.17.1.1.1.3.2.1.25ColumnrprSpanIntervalOutUcastClassBCirFramesread-onlycurrentThe number of transmitted (MAC to PHY) classB CIR unicast frames, in a particular interval in the past 24 hours.
1.0.8802.17.1.1.1.3.2.1.26ColumnrprSpanIntervalOutUcastClassBCirOctetsread-onlycurrentThe number of transmitted (MAC to PHY) classB CIR unicast octets in a particular interval in the past 24 hours.
1.0.8802.17.1.1.1.3.2.1.27ColumnrprSpanIntervalOutUcastClassBEirFramesread-onlycurrentThe number of transmitted (MAC to PHY) classB EIR unicast frames in a particular interval in the past 24 hours.
1.0.8802.17.1.1.1.3.2.1.28ColumnrprSpanIntervalOutUcastClassBEirOctetsread-onlycurrentThe number of transmitted (MAC to PHY) classB EIR unicast octets in a particular interval in the past 24 hours.
1.0.8802.17.1.1.1.3.2.1.29ColumnrprSpanIntervalOutUcastClassCFramesread-onlycurrentThe number of transmitted (MAC to PHY) classC unicast frames in a particular interval in the past 24 hours.
1.0.8802.17.1.1.1.3.2.1.30ColumnrprSpanIntervalOutUcastClassCOctetsread-onlycurrentThe number of transmitted (MAC to PHY) classC unicast octets in a particular interval in the past 24 hours.
1.0.8802.17.1.1.1.3.2.1.31ColumnrprSpanIntervalOutMcastClassAFramesread-onlycurrentThe number of transmitted (MAC to PHY) classA multicast and broadcast frames in a particular interval in the past 24 hours.
1.0.8802.17.1.1.1.3.2.1.32ColumnrprSpanIntervalOutMcastClassAOctetsread-onlycurrentThe number of transmitted (MAC to PHY) classA multicast and broadcast octets in a particular interval in the past 24 hours.
1.0.8802.17.1.1.1.3.2.1.33ColumnrprSpanIntervalOutMcastClassBCirFramesread-onlycurrentThe number of transmitted (MAC to PHY) classB CIR multicast and broadcast frames in a particular interval in the past 24 hours.
1.0.8802.17.1.1.1.3.2.1.34ColumnrprSpanIntervalOutMcastClassBCirOctetsread-onlycurrentThe number of transmitted (MAC to PHY) classB CIR multicast and broadcast octets in a particular interval in the past 24 hours.
1.0.8802.17.1.1.1.3.2.1.35ColumnrprSpanIntervalOutMcastClassBEirFramesread-onlycurrentThe number of transmitted (MAC to PHY) classB EIR multicast and broadcast frames in a particular interval in the past 24 hours.
1.0.8802.17.1.1.1.3.2.1.36ColumnrprSpanIntervalOutMcastClassBEirOctetsread-onlycurrentThe number of transmitted (MAC to PHY) classB EIR multicast and broadcast octets in a particular interval in the past 24 hours.
1.0.8802.17.1.1.1.3.2.1.37ColumnrprSpanIntervalOutMcastClassCFramesread-onlycurrentThe number of transmitted (MAC to PHY) classC multicast and broadcast frames in a particular interval in the past 24 hours.
1.0.8802.17.1.1.1.3.2.1.38ColumnrprSpanIntervalOutMcastClassCOctetsread-onlycurrentThe number of transmitted (MAC to PHY) classC multicast and broadcast octets in a particular interval in the past 24 hours.
1.0.8802.17.1.1.1.3.3TablerprSpanCountersDayTablenot-accessiblecurrentThe RPR Mac Span Day Table contains the cumulative sum of the various statistics for the 24 hour period preceding the current interval. All attributes in this …
1.0.8802.17.1.1.1.3.3.1RowrprSpanCountersDayEntrynot-accessiblecurrentAn entry in the RPR Span Day table.
1.0.8802.17.1.1.1.3.3.1.1ColumnrprSpanDayIfIndexnot-accessiblecurrentThe ifIndex of this RPR interface.
1.0.8802.17.1.1.1.3.3.1.2ColumnrprSpanDaySpannot-accessiblecurrentAn indication of the span of the interface for which this row contains information.
1.0.8802.17.1.1.1.3.3.1.3ColumnrprSpanDayInUcastClassAFramesread-onlycurrentThe number of received (PHY to MAC) classA unicast frames.
1.0.8802.17.1.1.1.3.3.1.4ColumnrprSpanDayInUcastClassAOctetsread-onlycurrentThe number of received (PHY to MAC) classA unicast octets.
1.0.8802.17.1.1.1.3.3.1.5ColumnrprSpanDayInUcastClassBCirFramesread-onlycurrentThe number of received (PHY to MAC) classB CIR unicast frames.
1.0.8802.17.1.1.1.3.3.1.6ColumnrprSpanDayInUcastClassBCirOctetsread-onlycurrentThe number of received (PHY to MAC) classB CIR unicast octets.
1.0.8802.17.1.1.1.3.3.1.7ColumnrprSpanDayInUcastClassBEirFramesread-onlycurrentThe number of received (PHY to MAC) classB EIR unicast frames.
1.0.8802.17.1.1.1.3.3.1.8ColumnrprSpanDayInUcastClassBEirOctetsread-onlycurrentThe number of received (PHY to MAC) classB EIR unicast octets.
1.0.8802.17.1.1.1.3.3.1.9ColumnrprSpanDayInUcastClassCFramesread-onlycurrentThe number of received (PHY to MAC) classC unicast frames.
1.0.8802.17.1.1.1.3.3.1.10ColumnrprSpanDayInUcastClassCOctetsread-onlycurrentThe number of received (PHY to MAC) classC unicast octets.
1.0.8802.17.1.1.1.3.3.1.11ColumnrprSpanDayInMcastClassAFramesread-onlycurrentThe number of received (PHY to MAC) classA multicast and broadcast frames
1.0.8802.17.1.1.1.3.3.1.12ColumnrprSpanDayInMcastClassAOctetsread-onlycurrentThe number of received (PHY to MAC) classA multicast and broadcast octets
1.0.8802.17.1.1.1.3.3.1.13ColumnrprSpanDayInMcastClassBCirFramesread-onlycurrentThe number of received (PHY to MAC) classB CIR multicast and broadcast frames
1.0.8802.17.1.1.1.3.3.1.14ColumnrprSpanDayInMcastClassBCirOctetsread-onlycurrentThe number of received (PHY to MAC) classB CIR multicast and broadcast octets
1.0.8802.17.1.1.1.3.3.1.15ColumnrprSpanDayInMcastClassBEirFramesread-onlycurrentThe number of received (PHY to MAC) classB EIR multicast and broadcast frames
1.0.8802.17.1.1.1.3.3.1.16ColumnrprSpanDayInMcastClassBEirOctetsread-onlycurrentThe number of received (PHY to MAC) classB EIR multicast and broadcast octets
1.0.8802.17.1.1.1.3.3.1.17ColumnrprSpanDayInMcastClassCFramesread-onlycurrentThe number of received (PHY to MAC) classC multicast and broadcast frames
1.0.8802.17.1.1.1.3.3.1.18ColumnrprSpanDayInMcastClassCOctetsread-onlycurrentThe number of received (PHY to MAC) classC multicast and broadcast octets
1.0.8802.17.1.1.1.3.3.1.19ColumnrprSpanDayOutUcastClassAFramesread-onlycurrentThe number of transmitted (MAC to PHY) classA unicast frames.
1.0.8802.17.1.1.1.3.3.1.20ColumnrprSpanDayOutUcastClassAOctetsread-onlycurrentThe number of transmitted (MAC to PHY) classA unicast octets.
1.0.8802.17.1.1.1.3.3.1.21ColumnrprSpanDayOutUcastClassBCirFramesread-onlycurrentThe number of transmitted (MAC to PHY) classB CIR unicast frames.
1.0.8802.17.1.1.1.3.3.1.22ColumnrprSpanDayOutUcastClassBCirOctetsread-onlycurrentThe number of transmitted (MAC to PHY) classB CIR unicast octets.
1.0.8802.17.1.1.1.3.3.1.23ColumnrprSpanDayOutUcastClassBEirFramesread-onlycurrentThe number of transmitted (MAC to PHY) classB EIR unicast frames
1.0.8802.17.1.1.1.3.3.1.24ColumnrprSpanDayOutUcastClassBEirOctetsread-onlycurrentThe number of transmitted (MAC to PHY) classB EIR unicast octets
1.0.8802.17.1.1.1.3.3.1.25ColumnrprSpanDayOutUcastClassCFramesread-onlycurrentThe number of transmitted (MAC to PHY) classC unicast frames
1.0.8802.17.1.1.1.3.3.1.26ColumnrprSpanDayOutUcastClassCOctetsread-onlycurrentThe number of transmitted (MAC to PHY) classC unicast octets
1.0.8802.17.1.1.1.3.3.1.27ColumnrprSpanDayOutMcastClassAFramesread-onlycurrentThe number of transmitted (MAC to PHY) classA multicast and broadcast frames.
1.0.8802.17.1.1.1.3.3.1.28ColumnrprSpanDayOutMcastClassAOctetsread-onlycurrentThe number of transmitted (MAC to PHY) classA multicast and broadcast octets.
1.0.8802.17.1.1.1.3.3.1.29ColumnrprSpanDayOutMcastClassBCirFramesread-onlycurrentThe number of transmitted (MAC to PHY) classB CIR multicast and broadcast frames.
1.0.8802.17.1.1.1.3.3.1.30ColumnrprSpanDayOutMcastClassBCirOctetsread-onlycurrentThe number of transmitted (MAC to PHY) classB CIR multicast and broadcast octets.
1.0.8802.17.1.1.1.3.3.1.31ColumnrprSpanDayOutMcastClassBEirFramesread-onlycurrentThe number of transmitted (MAC to PHY) classB EIR multicast and broadcast frames.
1.0.8802.17.1.1.1.3.3.1.32ColumnrprSpanDayOutMcastClassBEirOctetsread-onlycurrentThe number of transmitted (MAC to PHY) classB EIR multicast and broadcast octets.
1.0.8802.17.1.1.1.3.3.1.33ColumnrprSpanDayOutMcastClassCFramesread-onlycurrentThe number of transmitted (MAC to PHY) classC multicast and broadcast frames.
1.0.8802.17.1.1.1.3.3.1.34ColumnrprSpanDayOutMcastClassCOctetsread-onlycurrentThe number of transmitted (MAC to PHY) classC multicast and broadcast octets.
1.0.8802.17.1.1.1.3.4TablerprSpanCountersStatsTablenot-accessiblecurrentThe RPR Mac Span interface total counters table. The DiscontinuityTime for this table is indicated by ifCounterDiscontinuityTime defined in ifXTable. All attri…
1.0.8802.17.1.1.1.3.4.1RowrprSpanCountersStatsEntrynot-accessiblecurrentAn entry in the span stats table.
1.0.8802.17.1.1.1.3.4.1.1ColumnrprSpanStatsIfIndexnot-accessiblecurrentThe ifIndex of this RPR interface.
1.0.8802.17.1.1.1.3.4.1.2ColumnrprSpanStatsSpannot-accessiblecurrentAn indication of the span of the interface for which this row contains information.
1.0.8802.17.1.1.1.3.4.1.3ColumnrprSpanStatsInUcastClassAFramesread-onlycurrentThe number of received (PHY to MAC) classA unicast frames.
1.0.8802.17.1.1.1.3.4.1.4ColumnrprSpanStatsInUcastClassAOctetsread-onlycurrentThe number of received (PHY to MAC) classA unicast octets.
1.0.8802.17.1.1.1.3.4.1.5ColumnrprSpanStatsInUcastClassBCirFramesread-onlycurrentThe number of received (PHY to MAC) classB CIR unicast frames.
1.0.8802.17.1.1.1.3.4.1.6ColumnrprSpanStatsInUcastClassBCirOctetsread-onlycurrentThe number of received (PHY to MAC) classB CIR unicast octets.
1.0.8802.17.1.1.1.3.4.1.7ColumnrprSpanStatsInUcastClassBEirFramesread-onlycurrentThe number of received (PHY to MAC) classB EIR unicast frames.
1.0.8802.17.1.1.1.3.4.1.8ColumnrprSpanStatsInUcastClassBEirOctetsread-onlycurrentThe number of received (PHY to MAC) classB EIR unicast octets.
1.0.8802.17.1.1.1.3.4.1.9ColumnrprSpanStatsInUcastClassCFramesread-onlycurrentThe number of received (PHY to MAC) classC unicast frames.
1.0.8802.17.1.1.1.3.4.1.10ColumnrprSpanStatsInUcastClassCOctetsread-onlycurrentThe number of received (PHY to MAC) classC unicast octets.
1.0.8802.17.1.1.1.3.4.1.11ColumnrprSpanStatsInMcastClassAFramesread-onlycurrentThe number of received (PHY to MAC) classA multicast and broadcast frames
1.0.8802.17.1.1.1.3.4.1.12ColumnrprSpanStatsInMcastClassAOctetsread-onlycurrentThe number of received (PHY to MAC) classA multicast and broadcast octets
1.0.8802.17.1.1.1.3.4.1.13ColumnrprSpanStatsInMcastClassBCirFramesread-onlycurrentThe number of received (PHY to MAC) classB CIR multicast and broadcast frames
1.0.8802.17.1.1.1.3.4.1.14ColumnrprSpanStatsInMcastClassBCirOctetsread-onlycurrentThe number of received (PHY to MAC) classB CIR multicast and broadcast octets
1.0.8802.17.1.1.1.3.4.1.15ColumnrprSpanStatsInMcastClassBEirFramesread-onlycurrentThe number of received (PHY to MAC) classB EIR multicast and broadcast frames
1.0.8802.17.1.1.1.3.4.1.16ColumnrprSpanStatsInMcastClassBEirOctetsread-onlycurrentThe number of received (PHY to MAC) classB EIR multicast and broadcast octets
1.0.8802.17.1.1.1.3.4.1.17ColumnrprSpanStatsInMcastClassCFramesread-onlycurrentThe number of received (PHY to MAC) classC multicast and broadcast frames
1.0.8802.17.1.1.1.3.4.1.18ColumnrprSpanStatsInMcastClassCOctetsread-onlycurrentThe number of received (PHY to MAC) classC multicast and broadcast octets
1.0.8802.17.1.1.1.3.4.1.19ColumnrprSpanStatsInCtrlFramesread-onlycurrentThe number of received (PHY to MAC) control frames processed by this MAC. This does not include control frames in transit, i.e. a multicast control frame recei…
1.0.8802.17.1.1.1.3.4.1.20ColumnrprSpanStatsInOamEchoFramesread-onlycurrentThe number of received (PHY to MAC) OAM echo frames processed by this MAC.
1.0.8802.17.1.1.1.3.4.1.21ColumnrprSpanStatsInOamFlushFramesread-onlycurrentThe number of received (PHY to MAC) OAM flush frames processed by this MAC.
1.0.8802.17.1.1.1.3.4.1.22ColumnrprSpanStatsInOamOrgFramesread-onlycurrentThe number of received (PHY to MAC) OAM Org frames processed by this MAC.
1.0.8802.17.1.1.1.3.4.1.23ColumnrprSpanStatsInTopoAtdFramesread-onlycurrentThe number of received (PHY to MAC) Topology ATD frames processed by this MAC.
1.0.8802.17.1.1.1.3.4.1.24ColumnrprSpanStatsInTopoChkSumFramesread-onlycurrentThe number of received (PHY to MAC) topology checksum frames processed by this MAC.
1.0.8802.17.1.1.1.3.4.1.25ColumnrprSpanStatsInTopoTpFramesread-onlycurrentThe number of received (PHY to MAC) topology TP frames processed by this MAC.
1.0.8802.17.1.1.1.3.4.1.26ColumnrprSpanStatsOutUcastClassAFramesread-onlycurrentThe number of transmitted (MAC to PHY) classA unicast frames.
1.0.8802.17.1.1.1.3.4.1.27ColumnrprSpanStatsOutUcastClassAOctetsread-onlycurrentThe number of transmitted (MAC to PHY) classA unicast octets.
1.0.8802.17.1.1.1.3.4.1.28ColumnrprSpanStatsOutUcastClassBCirFramesread-onlycurrentThe number of transmitted (MAC to PHY) classB CIR unicast frames.
1.0.8802.17.1.1.1.3.4.1.29ColumnrprSpanStatsOutUcastClassBCirOctetsread-onlycurrentThe number of transmitted (MAC to PHY) classB CIR unicast octets.
1.0.8802.17.1.1.1.3.4.1.30ColumnrprSpanStatsOutUcastClassBEirFramesread-onlycurrentThe number of transmitted (MAC to PHY) classB EIR unicast frames
1.0.8802.17.1.1.1.3.4.1.31ColumnrprSpanStatsOutUcastClassBEirOctetsread-onlycurrentThe number of transmitted (MAC to PHY) classB EIR unicast octets
1.0.8802.17.1.1.1.3.4.1.32ColumnrprSpanStatsOutUcastClassCFramesread-onlycurrentThe number of transmitted (MAC to PHY) classC unicast frames
1.0.8802.17.1.1.1.3.4.1.33ColumnrprSpanStatsOutUcastClassCOctetsread-onlycurrentThe number of transmitted (MAC to PHY) classC unicast octets
1.0.8802.17.1.1.1.3.4.1.34ColumnrprSpanStatsOutMcastClassAFramesread-onlycurrentThe number of transmitted (MAC to PHY) classA multicast and broadcast frames.
1.0.8802.17.1.1.1.3.4.1.35ColumnrprSpanStatsOutMcastClassAOctetsread-onlycurrentThe number of transmitted (MAC to PHY) classA multicast and broadcast octets.
1.0.8802.17.1.1.1.3.4.1.36ColumnrprSpanStatsOutMcastClassBCirFramesread-onlycurrentThe number of transmitted (MAC to PHY) classB CIR multicast and broadcast frames.
1.0.8802.17.1.1.1.3.4.1.37ColumnrprSpanStatsOutMcastClassBCirOctetsread-onlycurrentThe number of transmitted (MAC to PHY) classB CIR multicast and broadcast octets.
1.0.8802.17.1.1.1.3.4.1.38ColumnrprSpanStatsOutMcastClassBEirFramesread-onlycurrentThe number of transmitted (MAC to PHY) classB EIR multicast and broadcast frames.
1.0.8802.17.1.1.1.3.4.1.39ColumnrprSpanStatsOutMcastClassBEirOctetsread-onlycurrentThe number of transmitted (MAC to PHY) classB EIR multicast and broadcast octets.
1.0.8802.17.1.1.1.3.4.1.40ColumnrprSpanStatsOutMcastClassCFramesread-onlycurrentThe number of transmitted (MAC to PHY) classC multicast and broadcast frames.
1.0.8802.17.1.1.1.3.4.1.41ColumnrprSpanStatsOutMcastClassCOctetsread-onlycurrentThe number of transmitted (MAC to PHY) classC multicast and broadcast octets.
1.0.8802.17.1.1.1.3.4.1.42ColumnrprSpanStatsOutCtrlFramesread-onlycurrentThe number of transmitted (MAC to PHY) control frames generated by this MAC. This does not include control frames in transit, i.e. a multicast control frame re…
1.0.8802.17.1.1.1.3.4.1.43ColumnrprSpanStatsOutOamEchoFramesread-onlycurrentThe number of transmitted (MAC to PHY) OAM echo frames generated by this MAC.
1.0.8802.17.1.1.1.3.4.1.44ColumnrprSpanStatsOutOamFlushFramesread-onlycurrentThe number of transmitted (MAC to PHY) OAM flush frames generated by this MAC.
1.0.8802.17.1.1.1.3.4.1.45ColumnrprSpanStatsOutOamOrgFramesread-onlycurrentThe number of transmitted (MAC to PHY) OAM Org frames generated by this MAC.
1.0.8802.17.1.1.1.3.4.1.46ColumnrprSpanStatsOutTopoAtdFramesread-onlycurrentThe number of transmitted (MAC to PHY) topology ATD frames generated by this MAC.
1.0.8802.17.1.1.1.3.4.1.47ColumnrprSpanStatsOutTopoChkSumFramesread-onlycurrentThe number of transmitted (MAC to PHY) topology checksum frames generated by this MAC.
1.0.8802.17.1.1.1.3.4.1.48ColumnrprSpanStatsOutTopoTpFramesread-onlycurrentThe number of transmitted (MAC to PHY) topology TP frames generated by this MAC.
1.0.8802.17.1.1.1.4NoderprClientCounters
1.0.8802.17.1.1.1.4.1TablerprClientCountersCurrentTablenot-accessiblecurrentThe local station traffic current counters table. All attributes in this table are volatile, i.e. will be cleared on system reset.
1.0.8802.17.1.1.1.4.1.1RowrprClientCountersCurrentEntrynot-accessiblecurrentFrames and octets statistics for the current interval for the local station traffic of a particular RPR client interface. The corresponding instance of rprIfTi…
1.0.8802.17.1.1.1.4.1.1.1ColumnrprClientCurrentIfIndexnot-accessiblecurrentThe ifIndex of this RPR interface.
1.0.8802.17.1.1.1.4.1.1.2ColumnrprClientCurrentInUcastClassAFramesread-onlycurrentThe number of MAC to client classA unicast frames in the current interval.
1.0.8802.17.1.1.1.4.1.1.3ColumnrprClientCurrentInUcastClassAOctetsread-onlycurrentThe number of MAC to client classA unicast octets in the current interval.
1.0.8802.17.1.1.1.4.1.1.4ColumnrprClientCurrentInUcastClassBCirFramesread-onlycurrentThe number of MAC to client classB CIR unicast frames in the current interval.
1.0.8802.17.1.1.1.4.1.1.5ColumnrprClientCurrentInUcastClassBCirOctetsread-onlycurrentThe number of MAC to client classB CIR unicast octets in the current interval.
1.0.8802.17.1.1.1.4.1.1.6ColumnrprClientCurrentInUcastClassBEirFramesread-onlycurrentThe number of MAC to client classB EIR unicast frames in the current interval.
1.0.8802.17.1.1.1.4.1.1.7ColumnrprClientCurrentInUcastClassBEirOctetsread-onlycurrentThe number of MAC to client classB EIR unicast octets in the current interval.
1.0.8802.17.1.1.1.4.1.1.8ColumnrprClientCurrentInUcastClassCFramesread-onlycurrentThe number of MAC to client classC unicast frames in the current interval.
1.0.8802.17.1.1.1.4.1.1.9ColumnrprClientCurrentInUcastClassCOctetsread-onlycurrentThe number of MAC to client classC unicast octets in the current interval.
1.0.8802.17.1.1.1.4.1.1.10ColumnrprClientCurrentInMcastClassAFramesread-onlycurrentThe number of MAC to client classA multicast and broadcast frames in the current interval.
1.0.8802.17.1.1.1.4.1.1.11ColumnrprClientCurrentInMcastClassAOctetsread-onlycurrentThe number of MAC to client classA multicast and broadcast octets in the current interval.
1.0.8802.17.1.1.1.4.1.1.12ColumnrprClientCurrentInMcastClassBCirFramesread-onlycurrentThe number of MAC to client classB CIR multicast and broadcast frames in the current interval.
1.0.8802.17.1.1.1.4.1.1.13ColumnrprClientCurrentInMcastClassBCirOctetsread-onlycurrentThe number of MAC to client classB CIR multicast and broadcast octets in the current interval.
1.0.8802.17.1.1.1.4.1.1.14ColumnrprClientCurrentInMcastClassBEirFramesread-onlycurrentThe number of MAC to client classB EIR multicast and broadcast frames in the current interval.
1.0.8802.17.1.1.1.4.1.1.15ColumnrprClientCurrentInMcastClassBEirOctetsread-onlycurrentThe number of MAC to client classB EIR multicast and broadcast octets in the current interval.
1.0.8802.17.1.1.1.4.1.1.16ColumnrprClientCurrentInMcastClassCFramesread-onlycurrentThe number of MAC to client classC multicast and broadcast frames in the current interval.
1.0.8802.17.1.1.1.4.1.1.17ColumnrprClientCurrentInMcastClassCOctetsread-onlycurrentThe number of MAC to client classC multicast and broadcast octets in the current interval.
1.0.8802.17.1.1.1.4.1.1.18ColumnrprClientCurrentOutUcastClassAFramesread-onlycurrentThe number of client to MAC classA unicast frames in the current interval.
1.0.8802.17.1.1.1.4.1.1.19ColumnrprClientCurrentOutUcastClassAOctetsread-onlycurrentThe number of client to MAC classA unicast octets in the current interval.
1.0.8802.17.1.1.1.4.1.1.20ColumnrprClientCurrentOutUcastClassBCirFramesread-onlycurrentThe number of client to MAC classB CIR unicast frames in the current interval.
1.0.8802.17.1.1.1.4.1.1.21ColumnrprClientCurrentOutUcastClassBCirOctetsread-onlycurrentThe number of client to MAC classB CIR unicast octets in the current interval.
1.0.8802.17.1.1.1.4.1.1.22ColumnrprClientCurrentOutUcastClassBEirFramesread-onlycurrentThe number of client to MAC classB EIR unicast frames in the current interval.
1.0.8802.17.1.1.1.4.1.1.23ColumnrprClientCurrentOutUcastClassBEirOctetsread-onlycurrentThe number of client to MAC classB EIR unicast octets in the current interval.
1.0.8802.17.1.1.1.4.1.1.24ColumnrprClientCurrentOutUcastClassCFramesread-onlycurrentThe number of client to MAC classC unicast frames in the current interval.
1.0.8802.17.1.1.1.4.1.1.25ColumnrprClientCurrentOutUcastClassCOctetsread-onlycurrentThe number of client to MAC classC unicast octets in the current interval.
1.0.8802.17.1.1.1.4.1.1.26ColumnrprClientCurrentOutMcastClassAFramesread-onlycurrentThe number of client to MAC classA multicast and broadcast frames in the current interval.
1.0.8802.17.1.1.1.4.1.1.27ColumnrprClientCurrentOutMcastClassAOctetsread-onlycurrentThe number of client to MAC classA multicast and broadcast octets in the current interval.
1.0.8802.17.1.1.1.4.1.1.28ColumnrprClientCurrentOutMcastClassBCirFramesread-onlycurrentThe number of client to MAC classB CIR multicast and broadcast frames in the current interval.
1.0.8802.17.1.1.1.4.1.1.29ColumnrprClientCurrentOutMcastClassBCirOctetsread-onlycurrentThe number of client to MAC classB CIR multicast and broadcast octets in the current interval.
1.0.8802.17.1.1.1.4.1.1.30ColumnrprClientCurrentOutMcastClassBEirFramesread-onlycurrentThe number of client to MAC classB EIR multicast and broadcast frames in the current interval.
1.0.8802.17.1.1.1.4.1.1.31ColumnrprClientCurrentOutMcastClassBEirOctetsread-onlycurrentThe number of client to MAC classB EIR multicast and broadcast octets in the current interval.
1.0.8802.17.1.1.1.4.1.1.32ColumnrprClientCurrentOutMcastClassCFramesread-onlycurrentThe number of client to MAC classC multicast and broadcast frames in the current interval.
1.0.8802.17.1.1.1.4.1.1.33ColumnrprClientCurrentOutMcastClassCOctetsread-onlycurrentThe number of client to MAC classC multicast and broadcast octets in the current interval.
1.0.8802.17.1.1.1.4.2TablerprClientCountersIntervalTablenot-accessiblecurrentThe local station traffic interval counters table. All attributes in this table are volatile, i.e. will be cleared on system reset.
1.0.8802.17.1.1.1.4.2.1RowrprClientCountersIntervalEntrynot-accessiblecurrentFrames and octets statistics collected for a particular interval for local station traffic of a particular RPR interface. The corresponding instance of rprIfVa…
1.0.8802.17.1.1.1.4.2.1.1ColumnrprClientIntervalIfIndexnot-accessiblecurrentThe ifIndex of this RPR interface.
1.0.8802.17.1.1.1.4.2.1.2ColumnrprClientIntervalNumbernot-accessiblecurrentA number between 1 and 96, which identifies the interval for which the set of statistics is available. The interval identified by 1 is the most recently comple…
1.0.8802.17.1.1.1.4.2.1.3ColumnrprClientIntervalValidDataread-onlycurrentThis variable indicates if the data for this interval is valid. It will be valid if it contains data for 900 seconds plus or minus 10 seconds.
1.0.8802.17.1.1.1.4.2.1.4ColumnrprClientIntervalTimeElapsedread-onlycurrentThe duration of a particular interval in seconds. If, for some reason, such as an adjustment in the system's time-of-day clock, the current interval exceeds th…
1.0.8802.17.1.1.1.4.2.1.5ColumnrprClientIntervalInUcastClassAFramesread-onlycurrentThe number of MAC to client classA unicast frames in a particular interval in the past 24 hours.
1.0.8802.17.1.1.1.4.2.1.6ColumnrprClientIntervalInUcastClassAOctetsread-onlycurrentThe number of MAC to client classA unicast octets in a particular interval in the past 24 hours.
1.0.8802.17.1.1.1.4.2.1.7ColumnrprClientIntervalInUcastClassBCirFramesread-onlycurrentThe number of MAC to client classB CIR unicast frames in a particular interval in the past 24 hours.
1.0.8802.17.1.1.1.4.2.1.8ColumnrprClientIntervalInUcastClassBCirOctetsread-onlycurrentThe number of MAC to client classB CIR unicast octets in a particular interval in the past 24 hours.
1.0.8802.17.1.1.1.4.2.1.9ColumnrprClientIntervalInUcastClassBEirFramesread-onlycurrentThe number of MAC to client classB EIR unicast frames in a particular interval in the past 24 hours.
1.0.8802.17.1.1.1.4.2.1.10ColumnrprClientIntervalInUcastClassBEirOctetsread-onlycurrentThe number of MAC to client classB EIR unicast octets in a particular interval in the past 24 hours.
1.0.8802.17.1.1.1.4.2.1.11ColumnrprClientIntervalInUcastClassCFramesread-onlycurrentThe number of MAC to client classC unicast frames in a particular interval in the past 24 hours.
1.0.8802.17.1.1.1.4.2.1.12ColumnrprClientIntervalInUcastClassCOctetsread-onlycurrentThe number of MAC to client classC unicast octets in a particular interval in the past 24 hours.
1.0.8802.17.1.1.1.4.2.1.13ColumnrprClientIntervalInMcastClassAFramesread-onlycurrentThe number of MAC to client classA multicast and broadcast frames in a particular interval in the past 24 hours.
1.0.8802.17.1.1.1.4.2.1.14ColumnrprClientIntervalInMcastClassAOctetsread-onlycurrentThe number of MAC to client classA multicast and broadcast octets in a particular interval in the past 24 hours.
1.0.8802.17.1.1.1.4.2.1.15ColumnrprClientIntervalInMcastClassBCirFramesread-onlycurrentThe number of MAC to client classB CIR multicast and broadcast frames in a particular interval in the past 24 hours.
1.0.8802.17.1.1.1.4.2.1.16ColumnrprClientIntervalInMcastClassBCirOctetsread-onlycurrentThe number of MAC to client classB CIR multicast and broadcast octets in a particular interval in the past 24 hours.
1.0.8802.17.1.1.1.4.2.1.17ColumnrprClientIntervalInMcastClassBEirFramesread-onlycurrentThe number of MAC to client classB EIR multicast and broadcast frames in a particular interval in the past 24 hours.
1.0.8802.17.1.1.1.4.2.1.18ColumnrprClientIntervalInMcastClassBEirOctetsread-onlycurrentThe number of MAC to client classB EIR multicast and broadcast octets in a particular interval in the past 24 hours.
1.0.8802.17.1.1.1.4.2.1.19ColumnrprClientIntervalInMcastClassCFramesread-onlycurrentThe number of MAC to client classC multicast and broadcast frames in a particular interval in the past 24 hours.
1.0.8802.17.1.1.1.4.2.1.20ColumnrprClientIntervalInMcastClassCOctetsread-onlycurrentThe number of MAC to client classC multicast and broadcast octets in a particular interval in the past 24 hours.
1.0.8802.17.1.1.1.4.2.1.21ColumnrprClientIntervalOutUcastClassAFramesread-onlycurrentThe number of client to MAC classA unicast frames in a particular interval in the past 24 hours.
1.0.8802.17.1.1.1.4.2.1.22ColumnrprClientIntervalOutUcastClassAOctetsread-onlycurrentThe number of client to MAC classA unicast octets in a particular interval in the past 24 hours.
1.0.8802.17.1.1.1.4.2.1.23ColumnrprClientIntervalOutUcastClassBCirFramesread-onlycurrentThe number of client to MAC classB CIR unicast frames in a particular interval in the past 24 hours.
1.0.8802.17.1.1.1.4.2.1.24ColumnrprClientIntervalOutUcastClassBCirOctetsread-onlycurrentThe number of client to MAC classB CIR unicast octets in a particular interval in the past 24 hours.
1.0.8802.17.1.1.1.4.2.1.25ColumnrprClientIntervalOutUcastClassBEirFramesread-onlycurrentThe number of client to MAC classB EIR unicast frames in a particular interval in the past 24 hours.
1.0.8802.17.1.1.1.4.2.1.26ColumnrprClientIntervalOutUcastClassBEirOctetsread-onlycurrentThe number of client to MAC classB EIR unicast octets in a particular interval in the past 24 hours.
1.0.8802.17.1.1.1.4.2.1.27ColumnrprClientIntervalOutUcastClassCFramesread-onlycurrentThe number of client to MAC classC unicast frames in a particular interval in the past 24 hours.
1.0.8802.17.1.1.1.4.2.1.28ColumnrprClientIntervalOutUcastClassCOctetsread-onlycurrentThe number of client to MAC classC unicast octets in a particular interval in the past 24 hours.
1.0.8802.17.1.1.1.4.2.1.29ColumnrprClientIntervalOutMcastClassAFramesread-onlycurrentThe number of client to MAC classA multicast and broadcast frames in a particular interval in the past 24 hours.
1.0.8802.17.1.1.1.4.2.1.30ColumnrprClientIntervalOutMcastClassAOctetsread-onlycurrentThe number of client to MAC classA multicast and broadcast octets in a particular interval in the past 24 hours.
1.0.8802.17.1.1.1.4.2.1.31ColumnrprClientIntervalOutMcastClassBCirFramesread-onlycurrentThe number of client to MAC classB CIR multicast and broadcast frames in a particular interval in the past 24 hours.
1.0.8802.17.1.1.1.4.2.1.32ColumnrprClientIntervalOutMcastClassBCirOctetsread-onlycurrentThe number of client to MAC classB CIR multicast and broadcast octets in a particular interval in the past 24 hours.
1.0.8802.17.1.1.1.4.2.1.33ColumnrprClientIntervalOutMcastClassBEirFramesread-onlycurrentThe number of client to MAC classB EIR multicast and broadcast frames in a particular interval in the past 24 hours.
1.0.8802.17.1.1.1.4.2.1.34ColumnrprClientIntervalOutMcastClassBEirOctetsread-onlycurrentThe number of client to MAC classB EIR multicast and broadcast octets in a particular interval in the past 24 hours.
1.0.8802.17.1.1.1.4.2.1.35ColumnrprClientIntervalOutMcastClassCFramesread-onlycurrentThe number of client to MAC classC multicast and broadcast frames in a particular interval in the past 24 hours.
1.0.8802.17.1.1.1.4.2.1.36ColumnrprClientIntervalOutMcastClassCOctetsread-onlycurrentThe number of client to MAC classC multicast and broadcast octets in a particular interval in the past 24 hours.
1.0.8802.17.1.1.1.4.3TablerprClientCountersDayTablenot-accessiblecurrentThe RPR Mac Client Day Table contains the cumulative sum of the various statistics for the 24 hour period preceding the current interval. All attributes in thi…
1.0.8802.17.1.1.1.4.3.1RowrprClientCountersDayEntrynot-accessiblecurrentAn entry in the RPR Client Day table.
1.0.8802.17.1.1.1.4.3.1.1ColumnrprClientDayIfIndexnot-accessiblecurrentThe ifIndex of this RPR interface.
1.0.8802.17.1.1.1.4.3.1.2ColumnrprClientDayInUcastClassAFramesread-onlycurrentThe number of MAC to client classA unicast frames.
1.0.8802.17.1.1.1.4.3.1.3ColumnrprClientDayInUcastClassAOctetsread-onlycurrentThe number of MAC to client classA unicast octets.
1.0.8802.17.1.1.1.4.3.1.4ColumnrprClientDayInUcastClassBCirFramesread-onlycurrentThe number of MAC to client classB CIR unicast frames.
1.0.8802.17.1.1.1.4.3.1.5ColumnrprClientDayInUcastClassBCirOctetsread-onlycurrentThe number of MAC to client classB CIR unicast octets.
1.0.8802.17.1.1.1.4.3.1.6ColumnrprClientDayInUcastClassBEirFramesread-onlycurrentThe number of MAC to client classB EIR unicast frames.
1.0.8802.17.1.1.1.4.3.1.7ColumnrprClientDayInUcastClassBEirOctetsread-onlycurrentThe number of MAC to client classB EIR unicast octets.
1.0.8802.17.1.1.1.4.3.1.8ColumnrprClientDayInUcastClassCFramesread-onlycurrentThe number of MAC to client classC unicast frames.
1.0.8802.17.1.1.1.4.3.1.9ColumnrprClientDayInUcastClassCOctetsread-onlycurrentThe number of MAC to client classC unicast octets.
1.0.8802.17.1.1.1.4.3.1.10ColumnrprClientDayInMcastClassAFramesread-onlycurrentThe number of MAC to client classA multicast and broadcast frames
1.0.8802.17.1.1.1.4.3.1.11ColumnrprClientDayInMcastClassAOctetsread-onlycurrentThe number of MAC to client classA multicast and broadcast octets
1.0.8802.17.1.1.1.4.3.1.12ColumnrprClientDayInMcastClassBCirFramesread-onlycurrentThe number of MAC to client classB CIR multicast and broadcast frames
1.0.8802.17.1.1.1.4.3.1.13ColumnrprClientDayInMcastClassBCirOctetsread-onlycurrentThe number of MAC to client classB CIR multicast and broadcast octets
1.0.8802.17.1.1.1.4.3.1.14ColumnrprClientDayInMcastClassBEirFramesread-onlycurrentThe number of MAC to client classB EIR multicast and broadcast frames
1.0.8802.17.1.1.1.4.3.1.15ColumnrprClientDayInMcastClassBEirOctetsread-onlycurrentThe number of MAC to client classB EIR multicast and broadcast octets
1.0.8802.17.1.1.1.4.3.1.16ColumnrprClientDayInMcastClassCFramesread-onlycurrentThe number of MAC to client classC multicast and broadcast frames
1.0.8802.17.1.1.1.4.3.1.17ColumnrprClientDayInMcastClassCOctetsread-onlycurrentThe number of MAC to client classC multicast and broadcast octets
1.0.8802.17.1.1.1.4.3.1.18ColumnrprClientDayOutUcastClassAFramesread-onlycurrentThe number of client to MAC classA unicast frames.
1.0.8802.17.1.1.1.4.3.1.19ColumnrprClientDayOutUcastClassAOctetsread-onlycurrentThe number of client to MAC classA unicast octets.
1.0.8802.17.1.1.1.4.3.1.20ColumnrprClientDayOutUcastClassBCirFramesread-onlycurrentThe number of client to MAC classB CIR unicast frames.
1.0.8802.17.1.1.1.4.3.1.21ColumnrprClientDayOutUcastClassBCirOctetsread-onlycurrentThe number of client to MAC classB CIR unicast octets.
1.0.8802.17.1.1.1.4.3.1.22ColumnrprClientDayOutUcastClassBEirFramesread-onlycurrentThe number of client to MAC classB EIR unicast frames
1.0.8802.17.1.1.1.4.3.1.23ColumnrprClientDayOutUcastClassBEirOctetsread-onlycurrentThe number of client to MAC classB EIR unicast octets
1.0.8802.17.1.1.1.4.3.1.24ColumnrprClientDayOutUcastClassCFramesread-onlycurrentThe number of client to MAC classC unicast frames
1.0.8802.17.1.1.1.4.3.1.25ColumnrprClientDayOutUcastClassCOctetsread-onlycurrentThe number of client to MAC classC unicast octets
1.0.8802.17.1.1.1.4.3.1.26ColumnrprClientDayOutMcastClassAFramesread-onlycurrentThe number of client to MAC classA multicast and broadcast frames.
1.0.8802.17.1.1.1.4.3.1.27ColumnrprClientDayOutMcastClassAOctetsread-onlycurrentThe number of client to MAC classA multicast and broadcast octets.
1.0.8802.17.1.1.1.4.3.1.28ColumnrprClientDayOutMcastClassBCirFramesread-onlycurrentThe number of client to MAC classB CIR multicast and broadcast frames.
1.0.8802.17.1.1.1.4.3.1.29ColumnrprClientDayOutMcastClassBCirOctetsread-onlycurrentThe number of client to MAC classB CIR multicast and broadcast octets.
1.0.8802.17.1.1.1.4.3.1.30ColumnrprClientDayOutMcastClassBEirFramesread-onlycurrentThe number of client to MAC classB EIR multicast and broadcast frames.
1.0.8802.17.1.1.1.4.3.1.31ColumnrprClientDayOutMcastClassBEirOctetsread-onlycurrentThe number of client to MAC classB EIR multicast and broadcast octets.
1.0.8802.17.1.1.1.4.3.1.32ColumnrprClientDayOutMcastClassCFramesread-onlycurrentThe number of client to MAC classC multicast and broadcast frames.
1.0.8802.17.1.1.1.4.3.1.33ColumnrprClientDayOutMcastClassCOctetsread-onlycurrentThe number of client to MAC classC multicast and broadcast octets.
1.0.8802.17.1.1.1.4.4TablerprClientCountersStatsTablenot-accessiblecurrentThe local station traffic total counters table. The DiscontinuityTime for this table is indicated by ifCounterDiscontinuityTime defined in ifXTable. All attrib…
1.0.8802.17.1.1.1.4.4.1RowrprClientCountersStatsEntrynot-accessiblecurrentAn entry in the span stats table.
1.0.8802.17.1.1.1.4.4.1.1ColumnrprClientStatsIfIndexnot-accessiblecurrentThe ifIndex of this RPR interface.
1.0.8802.17.1.1.1.4.4.1.2ColumnrprClientStatsInUcastClassAFramesread-onlycurrentThe number of MAC to client classA unicast frames.
1.0.8802.17.1.1.1.4.4.1.3ColumnrprClientStatsInUcastClassAOctetsread-onlycurrentThe number of MAC to client classA unicast octets.
1.0.8802.17.1.1.1.4.4.1.4ColumnrprClientStatsInUcastClassBCirFramesread-onlycurrentThe number of MAC to client classB CIR unicast frames.
1.0.8802.17.1.1.1.4.4.1.5ColumnrprClientStatsInUcastClassBCirOctetsread-onlycurrentThe number of MAC to client classB CIR unicast octets.
1.0.8802.17.1.1.1.4.4.1.6ColumnrprClientStatsInUcastClassBEirFramesread-onlycurrentThe number of MAC to client classB EIR unicast frames.
1.0.8802.17.1.1.1.4.4.1.7ColumnrprClientStatsInUcastClassBEirOctetsread-onlycurrentThe number of MAC to client classB EIR unicast octets.
1.0.8802.17.1.1.1.4.4.1.8ColumnrprClientStatsInUcastClassCFramesread-onlycurrentThe number of MAC to client classC unicast frames.
1.0.8802.17.1.1.1.4.4.1.9ColumnrprClientStatsInUcastClassCOctetsread-onlycurrentThe number of MAC to client classC unicast octets.
1.0.8802.17.1.1.1.4.4.1.10ColumnrprClientStatsInMcastClassAFramesread-onlycurrentThe number of MAC to client classA multicast and broadcast frames
1.0.8802.17.1.1.1.4.4.1.11ColumnrprClientStatsInMcastClassAOctetsread-onlycurrentThe number of MAC to client classA multicast and broadcast octets
1.0.8802.17.1.1.1.4.4.1.12ColumnrprClientStatsInMcastClassBCirFramesread-onlycurrentThe number of MAC to client classB CIR multicast and broadcast frames
1.0.8802.17.1.1.1.4.4.1.13ColumnrprClientStatsInMcastClassBCirOctetsread-onlycurrentThe number of MAC to client classB CIR multicast and broadcast octets
1.0.8802.17.1.1.1.4.4.1.14ColumnrprClientStatsInMcastClassBEirFramesread-onlycurrentThe number of MAC to client classB EIR multicast and broadcast frames
1.0.8802.17.1.1.1.4.4.1.15ColumnrprClientStatsInMcastClassBEirOctetsread-onlycurrentThe number of MAC to client classB EIR multicast and broadcast octets
1.0.8802.17.1.1.1.4.4.1.16ColumnrprClientStatsInMcastClassCFramesread-onlycurrentThe number of MAC to client classC multicast and broadcast frames
1.0.8802.17.1.1.1.4.4.1.17ColumnrprClientStatsInMcastClassCOctetsread-onlycurrentThe number of MAC to client classC multicast and broadcast octets
1.0.8802.17.1.1.1.4.4.1.18ColumnrprClientStatsInBcastFramesread-onlycurrentThe number of MAC to client broadcast frames. This is used only when deriving the multicast and broadcast packet counters for the interface MIB.
1.0.8802.17.1.1.1.4.4.1.19ColumnrprClientStatsOutUcastClassAFramesread-onlycurrentThe number of client to MAC classA unicast frames.
1.0.8802.17.1.1.1.4.4.1.20ColumnrprClientStatsOutUcastClassAOctetsread-onlycurrentThe number of client to MAC classA unicast octets.
1.0.8802.17.1.1.1.4.4.1.21ColumnrprClientStatsOutUcastClassBCirFramesread-onlycurrentThe number of client to MAC classB CIR unicast frames.
1.0.8802.17.1.1.1.4.4.1.22ColumnrprClientStatsOutUcastClassBCirOctetsread-onlycurrentThe number of client to MAC classB CIR unicast octets.
1.0.8802.17.1.1.1.4.4.1.23ColumnrprClientStatsOutUcastClassBEirFramesread-onlycurrentThe number of client to MAC classB EIR unicast frames
1.0.8802.17.1.1.1.4.4.1.24ColumnrprClientStatsOutUcastClassBEirOctetsread-onlycurrentThe number of client to MAC classB EIR unicast octets
1.0.8802.17.1.1.1.4.4.1.25ColumnrprClientStatsOutUcastClassCFramesread-onlycurrentThe number of client to MAC classC unicast frames
1.0.8802.17.1.1.1.4.4.1.26ColumnrprClientStatsOutUcastClassCOctetsread-onlycurrentThe number of client to MAC classC unicast octets
1.0.8802.17.1.1.1.4.4.1.27ColumnrprClientStatsOutMcastClassAFramesread-onlycurrentThe number of client to MAC classA multicast and broadcast frames.
1.0.8802.17.1.1.1.4.4.1.28ColumnrprClientStatsOutMcastClassAOctetsread-onlycurrentThe number of client to MAC classA multicast and broadcast octets.
1.0.8802.17.1.1.1.4.4.1.29ColumnrprClientStatsOutMcastClassBCirFramesread-onlycurrentThe number of client to MAC classB CIR multicast and broadcast frames.
1.0.8802.17.1.1.1.4.4.1.30ColumnrprClientStatsOutMcastClassBCirOctetsread-onlycurrentThe number of client to MAC classB CIR multicast and broadcast octets.
1.0.8802.17.1.1.1.4.4.1.31ColumnrprClientStatsOutMcastClassBEirFramesread-onlycurrentThe number of client to MAC classB EIR multicast and broadcast frames.
1.0.8802.17.1.1.1.4.4.1.32ColumnrprClientStatsOutMcastClassBEirOctetsread-onlycurrentThe number of client to MAC classB EIR multicast and broadcast octets.
1.0.8802.17.1.1.1.4.4.1.33ColumnrprClientStatsOutMcastClassCFramesread-onlycurrentThe number of client to MAC classC multicast and broadcast frames.
1.0.8802.17.1.1.1.4.4.1.34ColumnrprClientStatsOutMcastClassCOctetsread-onlycurrentThe number of client to MAC classC multicast and broadcast octets.
1.0.8802.17.1.1.1.4.4.1.35ColumnrprClientStatsOutBcastFramesread-onlycurrentThe number of client to MAC broadcast frames. This is used only when deriving the multicast and broadcast packet counters for the interface MIB.
1.0.8802.17.1.1.1.5NoderprSpanErrorCounters
1.0.8802.17.1.1.1.5.1TablerprSpanErrorCountersCurrentTablenot-accessiblecurrentThe RPR Errors Current counters table. All attributes in this table are volatile, i.e. will be cleared on system reset.
1.0.8802.17.1.1.1.5.1.1RowrprSpanErrorCountersCurrentEntrynot-accessiblecurrentErrors statistics for the current interval of a particular span of a particular RPR interface. The corresponding instance of rprIfTimeElapsed indicates the num…
1.0.8802.17.1.1.1.5.1.1.1ColumnrprSpanErrorCurrentIfIndexnot-accessiblecurrentThe ifIndex of this RPR interface.
1.0.8802.17.1.1.1.5.1.1.2ColumnrprSpanErrorCurrentSpannot-accessiblecurrentAn indication of the span of the interface for which this row contains information.
1.0.8802.17.1.1.1.5.1.1.3ColumnrprSpanErrorCurrentTtlExpFramesread-onlycurrentThe number of received (PHY to MAC) data frames that were dropped due to zero Time To Live (TTL).
1.0.8802.17.1.1.1.5.1.1.4ColumnrprSpanErrorCurrentTooLongFramesread-onlycurrentThe number of received (PHY to MAC) frames that exceed the maximum permitted frame size.
1.0.8802.17.1.1.1.5.1.1.5ColumnrprSpanErrorCurrentTooShortFramesread-onlycurrentThe number of received (PHY to MAC) frames shortest than the minimum permitted frame size.
1.0.8802.17.1.1.1.5.1.1.6ColumnrprSpanErrorCurrentBadHecFramesread-onlycurrentThe number of received (PHY to MAC) frames with HEC error.
1.0.8802.17.1.1.1.5.1.1.7ColumnrprSpanErrorCurrentBadFcsFramesread-onlycurrentThe number of received (PHY to MAC) data and control frames where the fcs value did not match the expected fcs value. This includes data frames passed to the c…
1.0.8802.17.1.1.1.5.1.1.8ColumnrprSpanErrorCurrentSelfSrcUcastFramesread-onlycurrentThe number of received (PHY to MAC) unicast frames that were transmitted by the station itself i.e. the source MAC is equal to the interface MAC.
1.0.8802.17.1.1.1.5.1.1.9ColumnrprSpanErrorCurrentPmdAbortFramesread-onlycurrentThe number of received (PHY to MAC) frames that were aborted by the PMD.
1.0.8802.17.1.1.1.5.1.1.10ColumnrprSpanErrorCurrentBadAddrFramesread-onlycurrentThe number of received (PHY to MAC) frames with invalid SA value.
1.0.8802.17.1.1.1.5.1.1.11ColumnrprSpanErrorCurrentBadParityFramesread-onlycurrentThe number of received (PHY to MAC) frames parity value not matching the expected parity value
1.0.8802.17.1.1.1.5.1.1.12ColumnrprSpanErrorCurrentContainedFramesread-onlycurrentThe number of received (PHY to MAC) frames that were removed due to context containment
1.0.8802.17.1.1.1.5.1.1.13ColumnrprSpanErrorCurrentScffErrorsread-onlycurrentThe number of received (PHY to MAC) errored SCFF, with bad parity, bad FCS, or both.
1.0.8802.17.1.1.1.5.1.1.14ColumnrprSpanErrorCurrentErroredSecondsread-onlycurrentThe number of errored seconds.
1.0.8802.17.1.1.1.5.1.1.15ColumnrprSpanErrorCurrentSeverelyErroredSecondsread-onlycurrentThe number of severely errored seconds.
1.0.8802.17.1.1.1.5.1.1.16ColumnrprSpanErrorCurrentUnavailableSecondsread-onlycurrentThe number of unavailable seconds.
1.0.8802.17.1.1.1.5.2TablerprSpanErrorCountersIntervalTablenot-accessiblecurrentThe RPR Errors Interval counters table. All attributes in this table are volatile, i.e. will be cleared on system reset.
1.0.8802.17.1.1.1.5.2.1RowrprSpanErrorCountersIntervalEntrynot-accessiblecurrentError statistics collected for a particular interval of a particular span of a particular RPR interface. The corresponding instance of rprIfValidIntervals indi…
1.0.8802.17.1.1.1.5.2.1.1ColumnrprSpanErrorIntervalIfIndexnot-accessiblecurrentThe ifIndex of this RPR interface.
1.0.8802.17.1.1.1.5.2.1.2ColumnrprSpanErrorIntervalSpannot-accessiblecurrentAn indication of the span of the interface for which this row contains information.
1.0.8802.17.1.1.1.5.2.1.3ColumnrprSpanErrorIntervalNumbernot-accessiblecurrentA number between 1 and 96, which identifies the interval for which the set of statistics is available. The interval identified by 1 is the most recently comple…
1.0.8802.17.1.1.1.5.2.1.4ColumnrprSpanErrorIntervalValidDataread-onlycurrentThis variable indicates if the data for this interval is valid. It will be valid if it contains data for 900 seconds plus or minus 10 seconds.
1.0.8802.17.1.1.1.5.2.1.5ColumnrprSpanErrorIntervalTimeElapsedread-onlycurrentThe duration of a particular interval in seconds. If, for some reason, such as an adjustment in the system's time-of-day clock, the current interval exceeds th…
1.0.8802.17.1.1.1.5.2.1.6ColumnrprSpanErrorIntervalTtlExpFramesread-onlycurrentThe number of received (PHY to MAC) frames that were dropped due to zero Time To Live (TTL) in a particular interval in the past 24 hours
1.0.8802.17.1.1.1.5.2.1.7ColumnrprSpanErrorIntervalTooLongFramesread-onlycurrentThe number of received (PHY to MAC) frames that exceed the maximum permitted frame size in a particular interval in the past 24 hours
1.0.8802.17.1.1.1.5.2.1.8ColumnrprSpanErrorIntervalTooShortFramesread-onlycurrentThe number of received (PHY to MAC) frames shortest than the minimum permitted frame size in a particular interval in the past 24 hours.
1.0.8802.17.1.1.1.5.2.1.9ColumnrprSpanErrorIntervalBadHecFramesread-onlycurrentThe number of received (PHY to MAC) frames with HEC error in a particular interval in the past 24 hours
1.0.8802.17.1.1.1.5.2.1.10ColumnrprSpanErrorIntervalBadFcsFramesread-onlycurrentThe number of received (PHY to MAC) data and control frames where the fcs value did not match the expected fcs value. This includes data frames passed to the c…
1.0.8802.17.1.1.1.5.2.1.11ColumnrprSpanErrorIntervalSelfSrcUcastFramesread-onlycurrentThe number of received (PHY to MAC) unicast frames that were transmitted by the station itself i.e. the source MAC is equal to the interface MAC, in a particul…
1.0.8802.17.1.1.1.5.2.1.12ColumnrprSpanErrorIntervalPmdAbortFramesread-onlycurrentThe number of received (PHY to MAC) unicast frames that were aborted by the PMD layer, in a particular interval in the past 24 hours
1.0.8802.17.1.1.1.5.2.1.13ColumnrprSpanErrorIntervalBadAddrFramesread-onlycurrentThe number of received (PHY to MAC) frames with invalid SA value.
1.0.8802.17.1.1.1.5.2.1.14ColumnrprSpanErrorIntervalBadParityFramesread-onlycurrentThe number of received (PHY to MAC) frames parity value not matching the expected parity value
1.0.8802.17.1.1.1.5.2.1.15ColumnrprSpanErrorIntervalContainedFramesread-onlycurrentThe number of received (PHY to MAC) frames that were removed due to context containment
1.0.8802.17.1.1.1.5.2.1.16ColumnrprSpanErrorIntervalScffErrorsread-onlycurrentThe number of received (PHY to MAC) errored SCFF, with bad parity, bad FCS, or both.
1.0.8802.17.1.1.1.5.2.1.17ColumnrprSpanErrorIntervalErroredSecondsread-onlycurrentThe number of errored seconds.
1.0.8802.17.1.1.1.5.2.1.18ColumnrprSpanErrorIntervalSeverelyErroredSecondsread-onlycurrentThe number of severely errored seconds.
1.0.8802.17.1.1.1.5.2.1.19ColumnrprSpanErrorIntervalUnavailableSecondsread-onlycurrentThe number of unavailable seconds.
1.0.8802.17.1.1.1.5.3TablerprSpanErrorCountersDayTablenot-accessiblecurrentThe RPR Mac Error Day Table contains the cumulative sum of the various statistics for the 24 hour period preceding the current interval. All attributes in this…
1.0.8802.17.1.1.1.5.3.1RowrprSpanErrorCountersDayEntrynot-accessiblecurrentAn entry in the RPR Error Day table.
1.0.8802.17.1.1.1.5.3.1.1ColumnrprSpanErrorDayIfIndexnot-accessiblecurrentThe ifIndex of this RPR interface.
1.0.8802.17.1.1.1.5.3.1.2ColumnrprSpanErrorDaySpannot-accessiblecurrentAn indication of the span of the interface for which this row contains information.
1.0.8802.17.1.1.1.5.3.1.3ColumnrprSpanErrorDayTtlExpFramesread-onlycurrentThe number of received (PHY to MAC) frames that were dropped due to zero Time To Live (TTL).
1.0.8802.17.1.1.1.5.3.1.4ColumnrprSpanErrorDayTooLongFramesread-onlycurrentThe number of received (PHY to MAC) frames that exceed the maximum permitted frame size.
1.0.8802.17.1.1.1.5.3.1.5ColumnrprSpanErrorDayTooShortFramesread-onlycurrentThe number of received (PHY to MAC) frames shortest than the minimum permitted frame size.
1.0.8802.17.1.1.1.5.3.1.6ColumnrprSpanErrorDayBadHecFramesread-onlycurrentThe number of received (PHY to MAC) frames with HEC error.
1.0.8802.17.1.1.1.5.3.1.7ColumnrprSpanErrorDayBadFcsFramesread-onlycurrentThe number of received (PHY to MAC) data and control frames where the fcs value did not match the expected fcs value. This includes data frames passed to the c…
1.0.8802.17.1.1.1.5.3.1.8ColumnrprSpanErrorDaySelfSrcUcastFramesread-onlycurrentThe number of received (PHY to MAC) unicast frames that were transmitted by the station itself i.e. the source MAC is equal to the interface MAC.
1.0.8802.17.1.1.1.5.3.1.9ColumnrprSpanErrorDayPmdAbortFramesread-onlycurrentThe number of received (PHY to MAC) frames that were aborted by the PMD
1.0.8802.17.1.1.1.5.3.1.10ColumnrprSpanErrorDayBadAddrFramesread-onlycurrentThe number of received (PHY to MAC) frames with invalid SA value.
1.0.8802.17.1.1.1.5.3.1.11ColumnrprSpanErrorDayBadParityFramesread-onlycurrentThe number of received (PHY to MAC) frames parity value not matching the expected parity value
1.0.8802.17.1.1.1.5.3.1.12ColumnrprSpanErrorDayContainedFramesread-onlycurrentThe number of received (PHY to MAC) frames that were removed due to context containment
1.0.8802.17.1.1.1.5.3.1.13ColumnrprSpanErrorDayScffErrorsread-onlycurrentThe number of received (PHY to MAC) errored SCFF, with bad parity, bad FCS, or both.
1.0.8802.17.1.1.1.5.3.1.14ColumnrprSpanErrorDayErroredSecondsread-onlycurrentThe number of errored seconds.
1.0.8802.17.1.1.1.5.3.1.15ColumnrprSpanErrorDaySeverelyErroredSecondsread-onlycurrentThe number of severely errored seconds.
1.0.8802.17.1.1.1.5.3.1.16ColumnrprSpanErrorDayUnavailableSecondsread-onlycurrentThe number of unavailable seconds.
1.0.8802.17.1.1.1.5.4TablerprSpanErrorCountersStatsTablenot-accessiblecurrentThe RPR Errors total counters table. The DiscontinuityTime for this table is indicated by ifCounterDiscontinuityTime defined in ifXTable. All attributes in thi…
1.0.8802.17.1.1.1.5.4.1RowrprSpanErrorCountersStatsEntrynot-accessiblecurrentAn entry in the span error counter table.
1.0.8802.17.1.1.1.5.4.1.1ColumnrprSpanErrorStatsIfIndexnot-accessiblecurrentThe ifIndex of this RPR interface.
1.0.8802.17.1.1.1.5.4.1.2ColumnrprSpanErrorStatsSpannot-accessiblecurrentAn indication of the span of the interface for which this row contains information.
1.0.8802.17.1.1.1.5.4.1.3ColumnrprSpanErrorStatsTtlExpFramesread-onlycurrentThe number of received (PHY to MAC) frames that were dropped due to zero Time To Live (TTL).
1.0.8802.17.1.1.1.5.4.1.4ColumnrprSpanErrorStatsTooLongFramesread-onlycurrentThe number of received (PHY to MAC) frames that exceed the maximum permitted frame size.
1.0.8802.17.1.1.1.5.4.1.5ColumnrprSpanErrorStatsTooShortFramesread-onlycurrentThe number of received (PHY to MAC) frames shortest than the minimum permitted frame size.
1.0.8802.17.1.1.1.5.4.1.6ColumnrprSpanErrorStatsBadHecFramesread-onlycurrentThe number of received (PHY to MAC) frames with HEC error.
1.0.8802.17.1.1.1.5.4.1.7ColumnrprSpanErrorStatsBadFcsFramesread-onlycurrentThe number of received (PHY to MAC) data and control frames where the fcs value did not match the expected fcs value. This includes data frames passed to the c…
1.0.8802.17.1.1.1.5.4.1.8ColumnrprSpanErrorStatsSelfSrcUcastFramesread-onlycurrentThe number of received (PHY to MAC) unicast frames that were transmitted by the station itself i.e. the source MAC is equal to the interface MAC.
1.0.8802.17.1.1.1.5.4.1.9ColumnrprSpanErrorStatsPmdAbortFramesread-onlycurrentThe number of received (PHY to MAC) frames that were aborted by the PMD
1.0.8802.17.1.1.1.5.4.1.10ColumnrprSpanErrorStatsBadAddrFramesread-onlycurrentThe number of received (PHY to MAC) frames with invalid SA value.
1.0.8802.17.1.1.1.5.4.1.11ColumnrprSpanErrorStatsBadParityFramesread-onlycurrentThe number of received (PHY to MAC) frames parity value not matching the expected parity value
1.0.8802.17.1.1.1.5.4.1.12ColumnrprSpanErrorStatsContainedFramesread-onlycurrentThe number of received (PHY to MAC) frames that were removed due to context containment
1.0.8802.17.1.1.1.5.4.1.13ColumnrprSpanErrorStatsScffErrorsread-onlycurrentThe number of received (PHY to MAC) errored SCFF, with bad parity, bad FCS, or both.
1.0.8802.17.1.1.2NoderprConformance
1.0.8802.17.1.1.2.1NoderprGroups
1.0.8802.17.1.1.2.1.1GrouprprIfGroupcurrentCollection of objects needed for RPR MAC configuration.
1.0.8802.17.1.1.2.1.2GrouprprIfGroupOptcurrentCollection of objects for RPR MAC.
1.0.8802.17.1.1.2.1.3GrouprprIfStatsControlGroupcurrentCollection of objects needed for RPR MAC statistics management.
1.0.8802.17.1.1.2.1.4GrouprprSpanGroupcurrentCollection of objects needed for RPR Span configuration.
1.0.8802.17.1.1.2.1.5GrouprprSpanGroupOptcurrentCollection of objects for RPR Span.
1.0.8802.17.1.1.2.1.6GrouprprSpanProtectionGroupcurrentCollection of objects needed for RPR Span Protection monitoring.
1.0.8802.17.1.1.2.1.7GrouprprTopoGroupcurrentCollection of objects needed for RPR Topology discovery.
1.0.8802.17.1.1.2.1.8GrouprprFairnessGroupcurrentCollection of objects needed for RPR Fairness configuration.
1.0.8802.17.1.1.2.1.9GrouprprFairnessGroupOptcurrentCollection of objects for RPR Fairness.
1.0.8802.17.1.1.2.1.10GrouprprOamGroupcurrentCollection of objects needed for RPR OAM configuration.
1.0.8802.17.1.1.2.1.11GrouprprIfChangeSummaryGroupcurrentCollection of objects summarizes changes on the RPR interfaces.
1.0.8802.17.1.1.2.1.12GrouprprSpanCurrentGroupcurrentCollection of objects counting MAC span current statistics.
1.0.8802.17.1.1.2.1.13GrouprprSpanIntervalGroupcurrentCollection of objects counting MAC span intervals statistics.
1.0.8802.17.1.1.2.1.14GrouprprSpanDayGroupcurrentCollection of objects counting MAC span 24 hours statistics.
1.0.8802.17.1.1.2.1.15GrouprprSpanStatsGroupcurrentCollection of objects counting MAC span total statistics.
1.0.8802.17.1.1.2.1.16GrouprprClientCurrentGroupcurrentCollection of objects counting MAC client interface current statistics.
1.0.8802.17.1.1.2.1.17GrouprprClientIntervalGroupcurrentCollection of objects counting MAC client interface intervals statistics.
1.0.8802.17.1.1.2.1.18GrouprprClientDayGroupcurrentCollection of objects counting MAC client interface 24 hours statistics.
1.0.8802.17.1.1.2.1.19GrouprprClientStatsGroupcurrentCollection of objects counting MAC client interface total statistics.
1.0.8802.17.1.1.2.1.20GrouprprErrorCurrentGroupcurrentCollection of objects counting MAC span error current statistics.
1.0.8802.17.1.1.2.1.21GrouprprErrorIntervalGroupcurrentCollection of objects counting MAC span error intervals statistics.
1.0.8802.17.1.1.2.1.22GrouprprErrorDayGroupcurrentCollection of objects counting MAC span error 24 hours statistics.
1.0.8802.17.1.1.2.1.23GrouprprErrorStatsGroupcurrentCollection of objects counting MAC span error total statistics.
1.0.8802.17.1.1.2.2NoderprCompliances
1.0.8802.17.1.1.2.2.1CompliancerprModuleTotalStatsCompliancecurrentThe compliance statement for agent that support RPR operation with total statistics collections.
Type Definitions
NameSyntaxStatusDescription
RprOamRingletINTEGER { default (1), ringlet0 (2), ringlet1 (3), reverseRinglet (4) }currentIndicates the ringlet on which the OAM action request/response is sent/replied. The valid values for this object are: (1) Default (2) ringlet0 (3) ringlet1 (4) Reverse ringlet. The value (4) is applicable only for OAM r…
RprProtectionStatusBITS { noRequest (0), waitToRestore (1), manualSwitch (2), signalDegraded (3), signalFailed (4), forcedSwitch (5) }currentIndicates the current protection status of the RPR MAC span. The status values are (arranged in ascending priority order) : noRequest No protection request on the span, the protection status is idle. waitToRestore The c…
RprSpanINTEGER { east (1), west (2) }currentIndicates the span interface of the RPR MAC. Each RPR span is connected to both ringlet0 and ringlet1. The east span receives from ringlet1 and transmits through ringlet0. The west span receives from ringlet0 and transm…
MIB Viewer