IEEE8023-EtherLike-MIB
83 objects
The MIB module to describe generic objects for Ethernet-like network interfaces.
Imported Objects
| IF-MIB | ifIndex InterfaceIndex |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | Counter32 Counter64 Integer32 MODULE-IDENTITY OBJECT-TYPE org Unsigned32 |
| SNMPv2-TC | TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.111.2.802.3.1.10 | Identityieee8023etherMIB | The MIB module to describe generic objects for Ethernet-like network interfaces. | ||
| 1.3.111.2.802.3.1.10.1 | Nodeieee8023etherMIBObjects | |||
| 1.3.111.2.802.3.1.10.1.2 | Tabledot3StatsTable | not-accessible | current | Statistics for a collection of Ethernet-like interfaces attached to a particular system. There will be one row in this table for each Ethernet-like interface i… |
| 1.3.111.2.802.3.1.10.1.2.1 | Rowdot3StatsEntry | not-accessible | current | Statistics for a particular interface to an Ethernet-like medium. |
| 1.3.111.2.802.3.1.10.1.2.1.1 | Columndot3StatsIndex | not-accessible | current | An index value that uniquely identifies an interface to an Ethernet-like medium. The interface identified by a particular value of this index is the same inter… |
| 1.3.111.2.802.3.1.10.1.2.1.2 | Columndot3StatsAlignmentErrors | read-only | current | A count of frames received on a particular interface that are not an integral number of octets in length and do not pass the FCS check. The count represented b… |
| 1.3.111.2.802.3.1.10.1.2.1.3 | Columndot3StatsFCSErrors | read-only | current | A count of frames received on a particular interface that are an integral number of octets in length but do not pass the FCS check. This count does not include… |
| 1.3.111.2.802.3.1.10.1.2.1.4 | Columndot3StatsSingleCollisionFrames | read-only | current | A count of frames that are involved in a single collision, and are subsequently transmitted successfully. A frame that is counted by an instance of this object… |
| 1.3.111.2.802.3.1.10.1.2.1.5 | Columndot3StatsMultipleCollisionFrames | read-only | current | A count of frames that are involved in more than one collision and are subsequently transmitted successfully. A frame that is counted by an instance of this ob… |
| 1.3.111.2.802.3.1.10.1.2.1.6 | Columndot3StatsSQETestErrors | read-only | current | A count of times that the SQE TEST ERROR is received on a particular interface. The SQE TEST ERROR is set in accordance with the rules for verification of the … |
| 1.3.111.2.802.3.1.10.1.2.1.7 | Columndot3StatsDeferredTransmissions | read-only | current | A count of frames for which the first transmission attempt on a particular interface is delayed because the medium is busy. The count represented by an instanc… |
| 1.3.111.2.802.3.1.10.1.2.1.8 | Columndot3StatsLateCollisions | read-only | current | The number of times that a collision is detected on a particular interface later than one slotTime into the transmission of a packet. A (late) collision includ… |
| 1.3.111.2.802.3.1.10.1.2.1.9 | Columndot3StatsExcessiveCollisions | read-only | current | A count of frames for which transmission on a particular interface fails due to excessive collisions. This counter does not increment when the interface is ope… |
| 1.3.111.2.802.3.1.10.1.2.1.10 | Columndot3StatsInternalMacTransmitErrors | read-only | current | A count of frames for which transmission on a particular interface fails due to an internal MAC sublayer transmit error. A frame is only counted by an instance… |
| 1.3.111.2.802.3.1.10.1.2.1.11 | Columndot3StatsCarrierSenseErrors | read-only | current | The number of times that the carrier sense condition was lost or never asserted when attempting to transmit a frame on a particular interface. The count repres… |
| 1.3.111.2.802.3.1.10.1.2.1.13 | Columndot3StatsFrameTooLongs | read-only | current | A count of frames received on a particular interface that exceed the maximum permitted frame size. The count represented by an instance of this object is incre… |
| 1.3.111.2.802.3.1.10.1.2.1.16 | Columndot3StatsInternalMacReceiveErrors | read-only | current | A count of frames for which reception on a particular interface fails due to an internal MAC sublayer receive error. A frame is only counted by an instance of … |
| 1.3.111.2.802.3.1.10.1.2.1.17 | Columndot3StatsSymbolErrors | read-only | current | For an interface operating at 100 Mb/s, the number of times there was an invalid data symbol when a valid carrier was present. For an interface operating in ha… |
| 1.3.111.2.802.3.1.10.1.2.1.18 | Columndot3StatsDuplexStatus | read-only | current | The current mode of operation of the MAC entity. 'unknown' indicates that the current duplex mode could not be determined. Management control of the duplex mod… |
| 1.3.111.2.802.3.1.10.1.2.1.19 | Columndot3StatsRateControlAbility | read-only | current | 'true' for interfaces operating at speeds above 1000 Mb/s that support Rate Control through lowering the average data rate of the MAC sublayer, with frame gran… |
| 1.3.111.2.802.3.1.10.1.2.1.20 | Columndot3StatsRateControlStatus | read-only | current | The current Rate Control mode of operation of the MAC sublayer of this interface. |
| 1.3.111.2.802.3.1.10.1.2.1.21 | Columndot3StatsMaxFrameLength | read-only | current | This indicates the MAC frame length at which the dot3StatsFrameTooLongs counter is incremented. |
| 1.3.111.2.802.3.1.10.1.5 | Tabledot3CollTable | not-accessible | current | A collection of collision histograms for a particular set of interfaces. |
| 1.3.111.2.802.3.1.10.1.5.1 | Rowdot3CollEntry | not-accessible | current | A cell in the histogram of per-frame collisions for a particular interface. An instance of this object represents the frequency of individual MAC frames for wh… |
| 1.3.111.2.802.3.1.10.1.5.1.2 | Columndot3CollCount | not-accessible | current | The number of per-frame media collisions for which a particular collision histogram cell represents the frequency on a particular interface. |
| 1.3.111.2.802.3.1.10.1.5.1.3 | Columndot3CollFrequencies | read-only | current | A count of individual MAC frames for which the transmission (successful or otherwise) on a particular interface occurs after the frame has experienced exactly … |
| 1.3.111.2.802.3.1.10.1.9 | Tabledot3ControlTable | not-accessible | current | A table of descriptive and status information about the MAC Control sublayer on the Ethernet-like interfaces attached to a particular system. There will be one… |
| 1.3.111.2.802.3.1.10.1.9.1 | Rowdot3ControlEntry | not-accessible | current | An entry in the table, containing information about the MAC Control sublayer on a single Ethernet-like interface. |
| 1.3.111.2.802.3.1.10.1.9.1.1 | Columndot3ControlFunctionsSupported | read-only | current | A list of the possible MAC Control functions implemented for this interface. |
| 1.3.111.2.802.3.1.10.1.9.1.2 | Columndot3ControlInUnknownOpcodes | read-only | current | A count of MAC Control frames received on this interface that contain an opcode that is not supported by this device. For interfaces operating at 10 Gb/s, this… |
| 1.3.111.2.802.3.1.10.1.9.1.3 | Columndot3HCControlInUnknownOpcodes | read-only | current | A count of MAC Control frames received on this interface that contain an opcode that is not supported by this device. This counter is a 64-bit version of dot3C… |
| 1.3.111.2.802.3.1.10.1.10 | Tabledot3PauseTable | not-accessible | current | A table of descriptive and status information about the MAC Control PAUSE function on the Ethernet-like interfaces attached to a particular system. There will … |
| 1.3.111.2.802.3.1.10.1.10.1 | Rowdot3PauseEntry | not-accessible | current | An entry in the table, containing information about the MAC Control PAUSE function on a single Ethernet-like interface. |
| 1.3.111.2.802.3.1.10.1.10.1.1 | Columndot3PauseAdminMode | read-write | current | This object is used to configure the default administrative PAUSE mode for this interface. This object represents the administratively-configured PAUSE mode fo… |
| 1.3.111.2.802.3.1.10.1.10.1.2 | Columndot3PauseOperMode | read-only | current | This object reflects the PAUSE mode currently in use on this interface, as determined by either (1) the result of the Auto-Negotiation function or (2) if Auto-… |
| 1.3.111.2.802.3.1.10.1.10.1.3 | Columndot3InPauseFrames | read-only | current | A count of MAC Control frames received on this interface with an opcode indicating the PAUSE operation. This counter does not increment when the interface is o… |
| 1.3.111.2.802.3.1.10.1.10.1.4 | Columndot3OutPauseFrames | read-only | current | A count of MAC Control frames transmitted on this interface with an opcode indicating the PAUSE operation. This counter does not increment when the interface i… |
| 1.3.111.2.802.3.1.10.1.10.1.5 | Columndot3HCInPauseFrames | read-only | current | A count of MAC Control frames received on this interface with an opcode indicating the PAUSE operation. This counter does not increment when the interface is o… |
| 1.3.111.2.802.3.1.10.1.10.1.6 | Columndot3HCOutPauseFrames | read-only | current | A count of MAC Control frames transmitted on this interface with an opcode indicating the PAUSE operation. This counter does not increment when the interface i… |
| 1.3.111.2.802.3.1.10.1.11 | Tabledot3HCStatsTable | not-accessible | current | A table containing 64-bit versions of error counters from the dot3StatsTable. The 32-bit versions of these counters may roll over quite quickly on higher speed… |
| 1.3.111.2.802.3.1.10.1.11.1 | Rowdot3HCStatsEntry | not-accessible | current | An entry containing 64-bit statistics for a single Ethernet-like interface. |
| 1.3.111.2.802.3.1.10.1.11.1.1 | Columndot3HCStatsAlignmentErrors | read-only | current | A count of frames received on a particular interface that are not an integral number of octets in length and do not pass the FCS check. The count represented b… |
| 1.3.111.2.802.3.1.10.1.11.1.2 | Columndot3HCStatsFCSErrors | read-only | current | A count of frames received on a particular interface that are an integral number of octets in length but do not pass the FCS check. This count does not include… |
| 1.3.111.2.802.3.1.10.1.11.1.3 | Columndot3HCStatsInternalMacTransmitErrors | read-only | current | A count of frames for which transmission on a particular interface fails due to an internal MAC sublayer transmit error. A frame is only counted by an instance… |
| 1.3.111.2.802.3.1.10.1.11.1.4 | Columndot3HCStatsFrameTooLongs | read-only | current | A count of frames received on a particular interface that exceed the maximum permitted frame size. The count represented by an instance of this object is incre… |
| 1.3.111.2.802.3.1.10.1.11.1.5 | Columndot3HCStatsInternalMacReceiveErrors | read-only | current | A count of frames for which reception on a particular interface fails due to an internal MAC sublayer receive error. A frame is only counted by an instance of … |
| 1.3.111.2.802.3.1.10.1.11.1.6 | Columndot3HCStatsSymbolErrors | read-only | current | For an interface operating at 100 Mb/s, the number of times there was an invalid data symbol when a valid carrier was present. For an interface operating in ha… |
| 1.3.111.2.802.3.1.10.1.11.1.7 | Columndot3HCStatsTransmitLPIMicroseconds | read-only | current | A count reflecting the amount of time that the LPI_REQUEST parameter has the value ASSERT. The request is indicated to the PHY according to the requirements of… |
| 1.3.111.2.802.3.1.10.1.11.1.8 | Columndot3HCStatsReceiveLPIMicroseconds | read-only | current | A count reflecting the amount of time that the LPI_INDICATION parameter has the value ASSERT. The indication reflects the state of the PHY according to the req… |
| 1.3.111.2.802.3.1.10.1.11.1.9 | Columndot3HCStatsTransmitLPITransitions | read-only | current | A count of occurrences of the transition from state LPI_DEASSERTED to state LPI_ASSERTED of the LPI transmit state diagram is the RS. The state transition corr… |
| 1.3.111.2.802.3.1.10.1.11.1.10 | Columndot3HCStatsReceiveLPITransitions | read-only | current | A count of occurrences of the transition from DEASSERT to ASSERT of the LPI_INDICATE parameter. The indication reflects the state of the PHY according to the r… |
| 1.3.111.2.802.3.1.10.1.12 | Scalardot3SlowProtocolFrameLimit | read-write | current | The maximum number of Slow Protocol frames of a given subtype that can be transmitted in a one second interval. The default value is 10. |
| 1.3.111.2.802.3.1.10.1.13 | Tabledot3ExtensionTable | not-accessible | current | A table of status information about the Extension MAC Control frames transmitted and received on the Ethernet-like interfaces attached to a particular system. … |
| 1.3.111.2.802.3.1.10.1.13.1 | Rowdot3ExtensionEntry | not-accessible | current | An entry in the table, containing information about the Extension MAC Control function on a single Ethernet-like interface. |
| 1.3.111.2.802.3.1.10.1.13.1.1 | Columndot3HCInExtensionFrames | read-only | current | A count of Extension MAC Control frames received on this interface. Discontinuities in the value of this counter can occur at re-initialization of the manageme… |
| 1.3.111.2.802.3.1.10.1.13.1.2 | Columndot3HCOutExtensionFrames | read-only | current | A count of Extension MAC Control frames transmitted on this interface. Discontinuities in the value of this counter can occur at re-initialization of the manag… |
| 1.3.111.2.802.3.1.10.1.13.1.3 | Columndot3ExtensionMacCtrlStatus | read-only | current | The current EXTENSIONMACCtrlStatus as described in IEEE Std 802.3, 30.3.8.3. |
| 1.3.111.2.802.3.1.10.1.14 | Tabledot3PFCTable | not-accessible | current | A table of descriptive and status information about the MAC Control Priority-based Flow Control function on the Ethernet-like interfaces attached to a particul… |
| 1.3.111.2.802.3.1.10.1.14.1 | Rowdot3PFCEntry | not-accessible | current | An entry in the table, containing information about the MAC Control PFC function on a single Ethernet-like interface. |
| 1.3.111.2.802.3.1.10.1.14.1.1 | Columndot3PFCAdminMode | read-write | current | This object is used to configure the default administrative PFC mode for this interface. This object represents the administratively-configured PFC mode for th… |
| 1.3.111.2.802.3.1.10.1.14.1.2 | Columndot3PFCOperMode | read-only | current | This object reflects the PFC mode currently in use on this interface, as determined by by the value of dot3PFCAdminMode. |
| 1.3.111.2.802.3.1.10.1.14.1.3 | Columndot3HCInPFCFrames | read-only | current | A count of MAC Control frames received on this interface with an opcode indicating the PFC operation. Discontinuities in the value of this counter can occur at… |
| 1.3.111.2.802.3.1.10.1.14.1.4 | Columndot3HCOutPFCFrames | read-only | current | A count of MAC Control frames transmitted on this interface with an opcode indicating the PFC operation. Discontinuities in the value of this counter can occur… |
| 1.3.111.2.802.3.1.10.2 | NodeetherConformance | |||
| 1.3.111.2.802.3.1.10.2.1 | NodeetherGroups | |||
| 1.3.111.2.802.3.1.10.2.1.1 | GroupetherCollisionTableGroup | current | A collection of objects providing a histogram of packets successfully transmitted after experiencing exactly N collisions. | |
| 1.3.111.2.802.3.1.10.2.1.2 | GroupetherStatsLowSpeedGroup | current | A collection of objects providing information applicable to Ethernet-like network interfaces capable of operating at 10 Mb/s or slower in half-duplex mode. | |
| 1.3.111.2.802.3.1.10.2.1.3 | GroupetherStatsHighSpeedGroup | current | A collection of objects providing information applicable to Ethernet-like network interfaces capable of operating at 100 Mb/s or faster. | |
| 1.3.111.2.802.3.1.10.2.1.4 | GroupetherDuplexGroup | current | A collection of objects providing information about the duplex mode of an Ethernet-like network interface. | |
| 1.3.111.2.802.3.1.10.2.1.5 | GroupetherControlGroup | current | A collection of objects providing information about the MAC Control sublayer on Ethernet-like network interfaces. | |
| 1.3.111.2.802.3.1.10.2.1.6 | GroupetherControlPauseGroup | current | A collection of objects providing information about and control of the MAC Control PAUSE function on Ethernet-like network interfaces. | |
| 1.3.111.2.802.3.1.10.2.1.7 | GroupetherStatsBaseGroup2 | current | A collection of objects providing information applicable to all Ethernet-like network interfaces. | |
| 1.3.111.2.802.3.1.10.2.1.8 | GroupetherStatsHalfDuplexGroup | current | A collection of objects providing information applicable only to half-duplex Ethernet-like network interfaces. | |
| 1.3.111.2.802.3.1.10.2.1.9 | GroupetherHCStatsGroup | current | A collection of objects providing high-capacity statistics applicable to higher-speed Ethernet-like network interfaces. | |
| 1.3.111.2.802.3.1.10.2.1.10 | GroupetherHCControlGroup | current | A collection of objects providing high-capacity statistics for the MAC Control sublayer on higher-speed Ethernet-like network interfaces. | |
| 1.3.111.2.802.3.1.10.2.1.11 | GroupetherHCControlPauseGroup | current | A collection of objects providing high-capacity statistics for the MAC Control PAUSE function on higher-speed Ethernet-like network interfaces. | |
| 1.3.111.2.802.3.1.10.2.1.12 | GroupetherRateControlGroup | current | A collection of objects providing information about the Rate Control function on Ethernet-like interfaces. | |
| 1.3.111.2.802.3.1.10.2.1.13 | GroupetherHCStatsLpiGroup | current | A collection of objects providing information about the Low Power Idle function on Ethernet-like interfaces. | |
| 1.3.111.2.802.3.1.10.2.1.14 | GroupetherSlowProtocolsGroup | current | An object providing control and information about the frame transmission rate limit for Slow Protocols on Ethernet-like interfaces. | |
| 1.3.111.2.802.3.1.10.2.1.15 | GroupetherExtensionMacCtrlGroup | current | A collection of objects providing information about the Extension MAC Control function on Ethernet-like interfaces. | |
| 1.3.111.2.802.3.1.10.2.1.16 | GroupetherPfcGroup | current | A collection of objects providing information about the Priority Flow Control function on Ethernet-like interfaces. | |
| 1.3.111.2.802.3.1.10.2.2 | NodeetherCompliances | |||
| 1.3.111.2.802.3.1.10.2.2.1 | Compliancedot3Compliance2 | current | The compliance statement for managed network entities which have Ethernet-like network interfaces. Note that compliance with this MIB module requires complianc… |