IMA-MIB
187 objects
The MIB module for managing ATM Forum Inverse Multiplexing for ATM (IMA) interfaces.
Imported Objects
| IF-MIB | ifIndex InterfaceIndex InterfaceIndexOrZero |
| SNMPv2-CONF | MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-SMI | Counter32 enterprises Gauge32 Integer32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE |
| SNMPv2-TC | DateAndTime RowStatus TEXTUAL-CONVENTION |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.353 | NodeatmForum | |||
| 1.3.6.1.4.1.353.5 | NodeatmForumNetworkManagement | |||
| 1.3.6.1.4.1.353.5.7 | NodeatmfIma | |||
| 1.3.6.1.4.1.353.5.7.1 | IdentityatmfImaMib | The MIB module for managing ATM Forum Inverse Multiplexing for ATM (IMA) interfaces. | ||
| 1.3.6.1.4.1.353.5.7.1.1 | NodeatmfImaMibObjects | |||
| 1.3.6.1.4.1.353.5.7.1.1.1 | ScalarimaGroupNumber | read-only | current | The number of IMA groups configured on this system. |
| 1.3.6.1.4.1.353.5.7.1.1.2 | TableimaGroupTable | not-accessible | current | The IMA Group Configuration table. |
| 1.3.6.1.4.1.353.5.7.1.1.2.1 | RowimaGroupEntry | not-accessible | current | An entry in the IMA Group table. |
| 1.3.6.1.4.1.353.5.7.1.1.2.1.1 | ColumnimaGroupIndex | not-accessible | current | A unique value for the IMA Group. |
| 1.3.6.1.4.1.353.5.7.1.1.2.1.2 | ColumnimaGroupRowStatus | read-create | current | The imaGroupRowStatus object allows create, change, and delete operations on imaGroupTable entries. To create a new conceptual row (or instance) of the imaGrou… |
| 1.3.6.1.4.1.353.5.7.1.1.2.1.3 | ColumnimaGroupIfIndex | read-only | current | This object identifies the logical interface number ('ifIndex') assigned to this IMA group, and is used to identify corresponding rows in the Interfaces MIB. N… |
| 1.3.6.1.4.1.353.5.7.1.1.2.1.4 | ColumnimaGroupNeState | read-only | current | The current operational state of the near-end IMA Group State Machine. |
| 1.3.6.1.4.1.353.5.7.1.1.2.1.5 | ColumnimaGroupFeState | read-only | current | The current operational state of the far-end IMA Group State Machine. |
| 1.3.6.1.4.1.353.5.7.1.1.2.1.6 | ColumnimaGroupFailureStatus | read-only | current | The current failure status of the IMA group (the reason why the GTSM is in the down state). |
| 1.3.6.1.4.1.353.5.7.1.1.2.1.7 | ColumnimaGroupSymmetry | read-create | current | Symmetry of the IMA group. |
| 1.3.6.1.4.1.353.5.7.1.1.2.1.8 | ColumnimaGroupMinNumTxLinks | read-create | current | Minimum number of transmit links required to be Active for the IMA group to be in the Operational state. |
| 1.3.6.1.4.1.353.5.7.1.1.2.1.9 | ColumnimaGroupMinNumRxLinks | read-create | current | Minimum number of receive links required to be Active for the IMA group to be in the Operational state. |
| 1.3.6.1.4.1.353.5.7.1.1.2.1.10 | ColumnimaGroupNeTxClkMode | read-create | current | Transmit clocking mode used by the near-end IMA group. |
| 1.3.6.1.4.1.353.5.7.1.1.2.1.11 | ColumnimaGroupFeTxClkMode | read-only | current | Transmit clocking mode used by the far-end IMA group. |
| 1.3.6.1.4.1.353.5.7.1.1.2.1.12 | ColumnimaGroupTxTimingRefLink | read-only | current | The ifIndex of the transmit timing reference link to be used by the near-end for IMA data cell clock recovery from the ATM layer. The distinguished value of ze… |
| 1.3.6.1.4.1.353.5.7.1.1.2.1.13 | ColumnimaGroupRxTimingRefLink | read-only | current | The ifIndex of the receive timing reference link to be used by near-end for IMA data cell clock recovery toward the ATM layer. The distinguished value of zero … |
| 1.3.6.1.4.1.353.5.7.1.1.2.1.14 | ColumnimaGroupLastChange | read-only | current | The time-of-day the IMA group last changed operational state (i.e., value of imaGroupNeState changed). |
| 1.3.6.1.4.1.353.5.7.1.1.2.1.15 | ColumnimaGroupTxImaId | read-create | current | The IMA ID currently in use by the near-end IMA function. |
| 1.3.6.1.4.1.353.5.7.1.1.2.1.16 | ColumnimaGroupRxImaId | read-only | current | The IMA ID currently in use by the far-end IMA function. |
| 1.3.6.1.4.1.353.5.7.1.1.2.1.17 | ColumnimaGroupTxFrameLength | read-create | current | The frame length to be used by the IMA group in the transmit direction. Can only be set when the IMA group is startup. |
| 1.3.6.1.4.1.353.5.7.1.1.2.1.18 | ColumnimaGroupRxFrameLength | read-only | current | Value of IMA frame length as received from remote IMA function. |
| 1.3.6.1.4.1.353.5.7.1.1.2.1.19 | ColumnimaGroupDiffDelayMax | read-create | current | The maximum number of milliseconds of differential delay among the links that will be tolerated on this interface. |
| 1.3.6.1.4.1.353.5.7.1.1.2.1.20 | ColumnimaGroupLeastDelayLink | read-only | current | The ifIndex of the link configured in the IMA group which has the smallest link propagation delay. The distinguished value of zero may be used if no link has b… |
| 1.3.6.1.4.1.353.5.7.1.1.2.1.21 | ColumnimaGroupDiffDelayMaxObs | read-only | current | The latest maximum differential delay observed (in milliseconds) between the links having the least and most link propagation delay, among the receive links th… |
| 1.3.6.1.4.1.353.5.7.1.1.2.1.22 | ColumnimaGroupAlphaValue | read-create | current | This indicates the 'alpha' value used to specify the number of consecutive invalid ICP cells to be detected before moving to the IMA Hunt state from the IMA Sy… |
| 1.3.6.1.4.1.353.5.7.1.1.2.1.23 | ColumnimaGroupBetaValue | read-create | current | This indicates the 'beta' value used to specify the number of consecutive errored ICP cells to be detected before moving to the IMA Hunt state from the IMA Syn… |
| 1.3.6.1.4.1.353.5.7.1.1.2.1.24 | ColumnimaGroupGammaValue | read-create | current | This indicates the 'gamma' value used to specify the number of consecutive valid ICP cells to be detected before moving to the IMA Sync state from the IMA PreS… |
| 1.3.6.1.4.1.353.5.7.1.1.2.1.25 | ColumnimaGroupRunningSecs | read-only | current | The amount of time (in seconds) since this IMA group has been in the Operational state. |
| 1.3.6.1.4.1.353.5.7.1.1.2.1.26 | ColumnimaGroupUnavailSecs | read-only | current | Count of one second intervals where the IMA Group Traffic State Machine is Down. |
| 1.3.6.1.4.1.353.5.7.1.1.2.1.27 | ColumnimaGroupNeNumFailures | read-only | current | The number of times a near-end group failure (Config-Aborted, Insufficient-Links) has been reported since power-up or reboot. |
| 1.3.6.1.4.1.353.5.7.1.1.2.1.28 | ColumnimaGroupFeNumFailures | read-only | current | The number of times a far-end group failure (Config-Aborted-FE, Insufficient-Links-FE, Blocked-FE) has been reported since power-up or reboot. This is an optio… |
| 1.3.6.1.4.1.353.5.7.1.1.2.1.29 | ColumnimaGroupTxAvailCellRate | read-only | current | The current cell rate (truncated value in cells per second) provided by this IMA group in the transmit direction, considering all the transmit links in the Act… |
| 1.3.6.1.4.1.353.5.7.1.1.2.1.30 | ColumnimaGroupRxAvailCellRate | read-only | current | The current cell rate (truncated value in cells per second) provided by this IMA group in the receive direction, considering all the receive links in the Activ… |
| 1.3.6.1.4.1.353.5.7.1.1.2.1.31 | ColumnimaGroupNumTxCfgLinks | read-only | current | The number of links that are configured to transmit in this IMA group. This attribute overwrites the value of the imaGroupNumRxActLinks attribute when the IMA … |
| 1.3.6.1.4.1.353.5.7.1.1.2.1.32 | ColumnimaGroupNumRxCfgLinks | read-only | current | The number of links that are configured to receive in this IMA group. This attribute is overwritten by the value of the imaGroupNumTxActLinks attribute when th… |
| 1.3.6.1.4.1.353.5.7.1.1.2.1.33 | ColumnimaGroupNumTxActLinks | read-only | current | The number of links which are configured to transmit and are currently Active in this IMA group. |
| 1.3.6.1.4.1.353.5.7.1.1.2.1.34 | ColumnimaGroupNumRxActLinks | read-only | current | The number of links which are configured to receive and are currently Active in this IMA group. |
| 1.3.6.1.4.1.353.5.7.1.1.2.1.35 | ColumnimaGroupTestLinkIfIndex | read-create | current | This object is used to designate an interface as the test link for use in the Test Pattern Procedure. The distinguished value of zero specifies that the implem… |
| 1.3.6.1.4.1.353.5.7.1.1.2.1.36 | ColumnimaGroupTestPattern | read-create | current | The value of this object is used to specify the Tx Test Pattern in an IMA group loopback operation. A value in the range 0 to 255 designates a specific pattern… |
| 1.3.6.1.4.1.353.5.7.1.1.2.1.37 | ColumnimaGroupTestProcStatus | read-create | current | This object is used to enable or disable the Test Pattern Procedure, and to note whether at least one link failed the test. The test is started by setting oper… |
| 1.3.6.1.4.1.353.5.7.1.1.2.1.38 | ColumnimaGroupValidIntervals | read-only | current | The number of previous 15 minute intervals for which valid data was collected. The value will be 96 unless the IMA group table entry was created within the las… |
| 1.3.6.1.4.1.353.5.7.1.1.2.1.39 | ColumnimaGroupInvalidIntervals | read-only | current | The number of intervals for which no valid data is available. This attribute is only mandatory when the IMA Group Interval Statistics and/or IMA Group Total St… |
| 1.3.6.1.4.1.353.5.7.1.1.2.1.40 | ColumnimaGroupTimeElapsed | read-only | current | The number of seconds that have elapsed since the beginning of the current measurement period. This attribute is only mandatory when the IMA Group Current Stat… |
| 1.3.6.1.4.1.353.5.7.1.1.2.1.41 | ColumnimaGroupTxOamLabelValue | read-only | current | IMA OAM Label value transmitted by the NE IMA unit. |
| 1.3.6.1.4.1.353.5.7.1.1.2.1.42 | ColumnimaGroupRxOamLabelValue | read-only | current | IMA OAM Label value transmitted by the FE IMA unit. The value 0 likely means that the IMA unit has not received an OAM Label from the FE IMA unit at this time. |
| 1.3.6.1.4.1.353.5.7.1.1.3 | TableimaGroupMappingTable | not-accessible | current | A table mapping the 'ifIndex' values of 'imaGroupIfIndex' to the 'imaGroupIndex' values of the corresponding IMA group. |
| 1.3.6.1.4.1.353.5.7.1.1.3.1 | RowimaGroupMappingEntry | not-accessible | current | Each row describes one ifIndex to imaGroupIndex mapping. |
| 1.3.6.1.4.1.353.5.7.1.1.3.1.1 | ColumnimaGroupMappingIndex | read-only | current | The imaGroupIndex of the IMA Group which implements the specified interface. |
| 1.3.6.1.4.1.353.5.7.1.1.4 | TableimaLinkTable | not-accessible | current | The IMA group Link Status and Configuration table. |
| 1.3.6.1.4.1.353.5.7.1.1.4.1 | RowimaLinkEntry | not-accessible | current | An entry in the IMA Group Link table. |
| 1.3.6.1.4.1.353.5.7.1.1.4.1.1 | ColumnimaLinkIfIndex | not-accessible | current | This corresponds to the 'ifIndex' of the MIB-II interface on which this link is established. This object also corresponds to the logical number ('ifIndex') ass… |
| 1.3.6.1.4.1.353.5.7.1.1.4.1.2 | ColumnimaLinkRowStatus | read-create | current | The imaLinkRowStatus object allows create, change, and delete operations on imaLinkTable entries. To create a new conceptual row (or instance) of the imaLinkTa… |
| 1.3.6.1.4.1.353.5.7.1.1.4.1.3 | ColumnimaLinkGroupIndex | read-create | current | The value which identifies the IMA group (imaGroupIndex) of which this link is a member. |
| 1.3.6.1.4.1.353.5.7.1.1.4.1.4 | ColumnimaLinkNeTxState | read-only | current | The current state of the near-end transmit link. |
| 1.3.6.1.4.1.353.5.7.1.1.4.1.5 | ColumnimaLinkNeRxState | read-only | current | The current state of the near-end receive link. |
| 1.3.6.1.4.1.353.5.7.1.1.4.1.6 | ColumnimaLinkFeTxState | read-only | current | The current state of the far-end transmit link as reported via ICP cells. |
| 1.3.6.1.4.1.353.5.7.1.1.4.1.7 | ColumnimaLinkFeRxState | read-only | current | The current state of the far-end receive link as reported via ICP cells. |
| 1.3.6.1.4.1.353.5.7.1.1.4.1.8 | ColumnimaLinkNeRxFailureStatus | read-only | current | The current link failure status of the near-end receive link. |
| 1.3.6.1.4.1.353.5.7.1.1.4.1.9 | ColumnimaLinkFeRxFailureStatus | read-only | current | The current link failure status of the far-end receive link as reported via ICP cells. |
| 1.3.6.1.4.1.353.5.7.1.1.4.1.10 | ColumnimaLinkTxLid | read-only | current | The outgoing LID used currently on the link by the local end. This value has meaning only if the link belongs to an IMA group. |
| 1.3.6.1.4.1.353.5.7.1.1.4.1.11 | ColumnimaLinkRxLid | read-only | current | The incoming LID used currently on the link by the remote end as reported via ICP cells. This value has meaning only if the link belongs to an IMA group. |
| 1.3.6.1.4.1.353.5.7.1.1.4.1.12 | ColumnimaLinkRelDelay | read-only | current | The latest measured delay on this link relative to the link, in the same IMA group, with the least delay. |
| 1.3.6.1.4.1.353.5.7.1.1.4.1.13 | ColumnimaLinkImaViolations | read-only | current | ICP violations: count of errored, invalid or missing ICP cells, except during SES-IMA or UAS-IMA conditions. |
| 1.3.6.1.4.1.353.5.7.1.1.4.1.14 | ColumnimaLinkOifAnomalies | read-only | current | The number of OIF anomalies, except during SES-IMA or UAS-IMA conditions, at the near-end. This is an optional attribute. |
| 1.3.6.1.4.1.353.5.7.1.1.4.1.15 | ColumnimaLinkNeSevErroredSecs | read-only | current | Count of one second intervals containing >= 30% of the ICP cells counted as IV-IMAs, or one or more link defects (e.g., LOS, OOF/LOF, AIS, or LCD), LIF defects… |
| 1.3.6.1.4.1.353.5.7.1.1.4.1.16 | ColumnimaLinkFeSevErroredSecs | read-only | current | Count of one second intervals containing one or more RDI-IMA defects, except during UAS-IMA-FE condition. |
| 1.3.6.1.4.1.353.5.7.1.1.4.1.17 | ColumnimaLinkNeUnavailSecs | read-only | current | Count of unavailable seconds at near-end: unavailability begins at the onset of 10 contiguous SES-IMA and ends at the onset of 10 contiguous seconds with no SE… |
| 1.3.6.1.4.1.353.5.7.1.1.4.1.18 | ColumnimaLinkFeUnavailSecs | read-only | current | Count of unavailable seconds at far-end: unavailability begins at the onset of 10 contiguous SES-IMA-FE and ends at the onset of 10 contiguous seconds with no … |
| 1.3.6.1.4.1.353.5.7.1.1.4.1.19 | ColumnimaLinkNeTxUnusableSecs | read-only | current | Tx Unusable seconds: count of Tx Unusable seconds at the near-end Tx LSM. |
| 1.3.6.1.4.1.353.5.7.1.1.4.1.20 | ColumnimaLinkNeRxUnusableSecs | read-only | current | Rx Unusable seconds: count of Rx Unusable seconds at the near-end Rx LSM. |
| 1.3.6.1.4.1.353.5.7.1.1.4.1.21 | ColumnimaLinkFeTxUnusableSecs | read-only | current | Tx Unusable seconds at far-end: count of seconds with Tx Unusable indications from the far-end Tx LSM. |
| 1.3.6.1.4.1.353.5.7.1.1.4.1.22 | ColumnimaLinkFeRxUnusableSecs | read-only | current | Rx Unusable seconds at far-end: count of seconds with Rx Unusable indications from the far-end Rx LSM. |
| 1.3.6.1.4.1.353.5.7.1.1.4.1.23 | ColumnimaLinkNeTxNumFailures | read-only | current | The number of times a near-end transmit failure alarm condition has been entered on this link (i.e., some form of implementation specific transmit fault). |
| 1.3.6.1.4.1.353.5.7.1.1.4.1.24 | ColumnimaLinkNeRxNumFailures | read-only | current | The number of times a near-end receive failure alarm condition has been entered on this link (i.e., LIF, LODS, RFI-IMA, Mis-Connected or some form of implement… |
| 1.3.6.1.4.1.353.5.7.1.1.4.1.25 | ColumnimaLinkFeTxNumFailures | read-only | current | The number of times a far-end transmit failure alarm condition has been entered on this link (i.e., Tx-Unusable-FE). This is an optional attribute. |
| 1.3.6.1.4.1.353.5.7.1.1.4.1.26 | ColumnimaLinkFeRxNumFailures | read-only | current | The number of times a far-end receive failure alarm condition has been entered on this link (i.e., Rx-Unusable-FE). This is an optional attribute. |
| 1.3.6.1.4.1.353.5.7.1.1.4.1.27 | ColumnimaLinkTxStuffs | read-only | current | Count of stuff events inserted in the transmit direction. This is an optional attribute. |
| 1.3.6.1.4.1.353.5.7.1.1.4.1.28 | ColumnimaLinkRxStuffs | read-only | current | Count of stuff events detected in the receive direction. This is an optional attribute. |
| 1.3.6.1.4.1.353.5.7.1.1.4.1.29 | ColumnimaLinkRxTestPattern | read-only | current | This object identifies the test pattern received in the ICP Cell (octet 17) on the link during the IMA Test Pattern Procedure. This value may then be compared … |
| 1.3.6.1.4.1.353.5.7.1.1.4.1.30 | ColumnimaLinkTestProcStatus | read-only | current | This value indicates the current state of the Test Pattern Procedure. If the value is disabled(1), the test is not running. A value of operating(2) means the t… |
| 1.3.6.1.4.1.353.5.7.1.1.4.1.31 | ColumnimaLinkValidIntervals | read-only | current | The number of previous 15 minute intervals for which valid data was collected. The value will be 96 unless the IMA group table entry was created within the las… |
| 1.3.6.1.4.1.353.5.7.1.1.4.1.32 | ColumnimaLinkInvalidIntervals | read-only | current | The number of intervals for which no valid data is available. This attribute is only mandatory when the IMA Link Interval Statistics and/or IMA Link Total Stat… |
| 1.3.6.1.4.1.353.5.7.1.1.4.1.33 | ColumnimaLinkTimeElapsed | read-only | current | The number of seconds that have elapsed since the beginning of the current measurement period. This attribute is only mandatory when the IMA Link Current Stati… |
| 1.3.6.1.4.1.353.5.7.1.1.5 | ScalarimaAlarmStatus | read-only | current | Status of the IMA alarm. |
| 1.3.6.1.4.1.353.5.7.1.1.6 | ScalarimaAlarmType | read-only | current | The Type of IMA alarm declared or cleared. The value of ImaAlarmType identifies the type of alarm according to the definitions in the IMA specification. |
| 1.3.6.1.4.1.353.5.7.1.1.7 | TableimaGroupCurrentTable | not-accessible | current | The IMA Group Current table. |
| 1.3.6.1.4.1.353.5.7.1.1.7.1 | RowimaGroupCurrentEntry | not-accessible | current | An entry in the IMA Group Current table. |
| 1.3.6.1.4.1.353.5.7.1.1.7.1.1 | ColumnimaGroupCurrentUnavailSecs | read-only | current | Count of one second intervals where the IMA Group Traffic State Machine is Down in the current 15 minutes interval. |
| 1.3.6.1.4.1.353.5.7.1.1.7.1.2 | ColumnimaGroupCurrentNeNumFailures | read-only | current | The number of times a near-end group failure (Config-Aborted, Insufficient-Links) has been reported in the current 15 minutes interval. |
| 1.3.6.1.4.1.353.5.7.1.1.7.1.3 | ColumnimaGroupCurrentFeNumFailures | read-only | current | The number of times a far-end group failure (Config-Aborted-FE, Insufficient-Links-FE, Blocked-FE) has been reported in the current 15 minutes interval. This i… |
| 1.3.6.1.4.1.353.5.7.1.1.8 | TableimaGroupIntervalTable | not-accessible | current | The IMA Group Interval table. |
| 1.3.6.1.4.1.353.5.7.1.1.8.1 | RowimaGroupIntervalEntry | not-accessible | current | An entry in the IMA Group Interval table. |
| 1.3.6.1.4.1.353.5.7.1.1.8.1.1 | ColumnimaGroupIntervalNumber | not-accessible | current | A number between 1 and 96, where 1 is the most recently completed 15 minute interval and 96 is the least recently completed 15 minutes interval (assuming that … |
| 1.3.6.1.4.1.353.5.7.1.1.8.1.2 | ColumnimaGroupIntervalUnavailSecs | read-only | current | Count of one second intervals where the IMA Group Traffic State Machine is Down in one of the previous 96, individual 15 minute, intervals. |
| 1.3.6.1.4.1.353.5.7.1.1.8.1.3 | ColumnimaGroupIntervalNeNumFailures | read-only | current | The number of times a near-end group failure (Config-Aborted, Insufficient-Links) has been reported in one of the previous 96, individual 15 minute, intervals. |
| 1.3.6.1.4.1.353.5.7.1.1.8.1.4 | ColumnimaGroupIntervalFeNumFailures | read-only | current | The number of times a far-end group failure (Config-Aborted-FE, Insufficient-Links-FE, Blocked-FE) has been reported in one of the previous 96, individual 15 m… |
| 1.3.6.1.4.1.353.5.7.1.1.9 | TableimaGroupTotalTable | not-accessible | current | The IMA Group Total table. |
| 1.3.6.1.4.1.353.5.7.1.1.9.1 | RowimaGroupTotalEntry | not-accessible | current | An entry in the IMA Group Total table. |
| 1.3.6.1.4.1.353.5.7.1.1.9.1.1 | ColumnimaGroupTotalUnavailSecs | read-only | current | Count of one second intervals where the IMA Group Traffic State Machine is Down in the previous 24 hour interval. Invalid 15 minute intervals count as 0. |
| 1.3.6.1.4.1.353.5.7.1.1.9.1.2 | ColumnimaGroupTotalNeNumFailures | read-only | current | The number of times a near-end group failure (Config-Aborted, Insufficient-Links) has been reported in the previous 24 hour interval. Invalid 15 minute interva… |
| 1.3.6.1.4.1.353.5.7.1.1.9.1.3 | ColumnimaGroupTotalFeNumFailures | read-only | current | The number of times a far-end group failure (Config-Aborted-FE, Insufficient-Links-FE, Blocked-FE) has been reported in the previous 24 hour interval. Invalid … |
| 1.3.6.1.4.1.353.5.7.1.1.10 | TableimaLinkCurrentTable | not-accessible | current | The IMA Link Current table. |
| 1.3.6.1.4.1.353.5.7.1.1.10.1 | RowimaLinkCurrentEntry | not-accessible | current | An entry in the IMA Link Current table. |
| 1.3.6.1.4.1.353.5.7.1.1.10.1.1 | ColumnimaLinkCurrentImaViolations | read-only | current | ICP violations: count of errored, invalid or missing ICP cells, except during SES-IMA or UAS-IMA conditions, in the current 15 minute interval. |
| 1.3.6.1.4.1.353.5.7.1.1.10.1.2 | ColumnimaLinkCurrentOifAnomalies | read-only | current | The number of OIF anomalies, except during SES-IMA or UAS-IMA conditions, at the near-end in the current 15 minute interval. This is an optional attribute. |
| 1.3.6.1.4.1.353.5.7.1.1.10.1.3 | ColumnimaLinkCurrentNeSevErroredSecs | read-only | current | Count of one second intervals containing >= 30% of the ICP cells counted as IV-IMAs, or one or more link defects (e.g., LOS, OOF/LOF, AIS, or LCD), LIF defects… |
| 1.3.6.1.4.1.353.5.7.1.1.10.1.4 | ColumnimaLinkCurrentFeSevErroredSecs | read-only | current | Count of one second intervals containing one or more RDI-IMA defects, except during UAS-IMA-FE condition, in the current 15 minute interval. |
| 1.3.6.1.4.1.353.5.7.1.1.10.1.5 | ColumnimaLinkCurrentNeUnavailSecs | read-only | current | Count of unavailable seconds at near-end in the current 15 minute interval: unavailability begins at the onset of 10 contiguous SES-IMA and ends at the onset o… |
| 1.3.6.1.4.1.353.5.7.1.1.10.1.6 | ColumnimaLinkCurrentFeUnavailSecs | read-only | current | Count of unavailable seconds at far-end in the current 15 minute interval: unavailability begins at the onset of 10 contiguous SES-IMA-FE and ends at the onset… |
| 1.3.6.1.4.1.353.5.7.1.1.10.1.7 | ColumnimaLinkCurrentNeTxUnusableSecs | read-only | current | Tx Unusable seconds: count of Unusable seconds at the near-end Tx LSM in the current 15 minute interval. |
| 1.3.6.1.4.1.353.5.7.1.1.10.1.8 | ColumnimaLinkCurrentNeRxUnusableSecs | read-only | current | Rx Unusable seconds: count of Unusable seconds at the near-end Rx LSM in the current 15 minute interval. |
| 1.3.6.1.4.1.353.5.7.1.1.10.1.9 | ColumnimaLinkCurrentFeTxUnusableSecs | read-only | current | Tx Unusable seconds at far-end: count of seconds with Tx Unusable indications from the far-end Tx LSM in the current 15 minute interval. |
| 1.3.6.1.4.1.353.5.7.1.1.10.1.10 | ColumnimaLinkCurrentFeRxUnusableSecs | read-only | current | Rx Unusable seconds at far-end: count of seconds with Rx Unusable indications from the far-end Rx LSM in the current 15 minute interval. |
| 1.3.6.1.4.1.353.5.7.1.1.10.1.11 | ColumnimaLinkCurrentNeTxNumFailures | read-only | current | The number of times a near-end transmit failure alarm condition has been entered on this link (i.e., some form of implementation specific transmit fault) in th… |
| 1.3.6.1.4.1.353.5.7.1.1.10.1.12 | ColumnimaLinkCurrentNeRxNumFailures | read-only | current | The number of times a near-end receive failure alarm condition has been entered on this link (i.e., LIF, LODS, RFI-IMA, Mis-Connected, or some form of implemen… |
| 1.3.6.1.4.1.353.5.7.1.1.10.1.13 | ColumnimaLinkCurrentFeTxNumFailures | read-only | current | The number of times a far-end transmit failure alarm condition has been entered on this link (i.e., Tx-Unusable-FE) in the current 15 minute interval. This is … |
| 1.3.6.1.4.1.353.5.7.1.1.10.1.14 | ColumnimaLinkCurrentFeRxNumFailures | read-only | current | The number of times a far-end receive failure alarm condition has been entered on this link (i.e., Rx-Unusable-FE) in the current 15 minute interval. This is a… |
| 1.3.6.1.4.1.353.5.7.1.1.10.1.15 | ColumnimaLinkCurrentTxStuffs | read-only | current | Count of stuff events inserted in the transmit direction in the current 15 minute interval. This is an optional attribute. |
| 1.3.6.1.4.1.353.5.7.1.1.10.1.16 | ColumnimaLinkCurrentRxStuffs | read-only | current | Count of stuff events detected in the receive direction in the current 15 minute interval. This is an optional attribute. |
| 1.3.6.1.4.1.353.5.7.1.1.11 | TableimaLinkIntervalTable | not-accessible | current | The IMA Link Interval table. |
| 1.3.6.1.4.1.353.5.7.1.1.11.1 | RowimaLinkIntervalEntry | not-accessible | current | An entry in the IMA Link Interval table. |
| 1.3.6.1.4.1.353.5.7.1.1.11.1.1 | ColumnimaLinkIntervalNumber | not-accessible | current | A number between 1 and 96, where 1 is the most recently completed 15 minute interval and 96 is the least recently completed 15 minutes interval (assuming that … |
| 1.3.6.1.4.1.353.5.7.1.1.11.1.2 | ColumnimaLinkIntervalImaViolations | read-only | current | ICP violations: count of errored, invalid or missing ICP cells, except during SES-IMA or UAS-IMA conditions, in one of the previous 96, individual 15 minute, i… |
| 1.3.6.1.4.1.353.5.7.1.1.11.1.3 | ColumnimaLinkIntervalOifAnomalies | read-only | current | The number of OIF anomalies, except during SES-IMA or UAS-IMA conditions, at the near-end in one of the previous 96, individual 15 minute, intervals. This is a… |
| 1.3.6.1.4.1.353.5.7.1.1.11.1.4 | ColumnimaLinkIntervalNeSevErroredSecs | read-only | current | Count of one second intervals containing >= 30% of the ICP cells counted as IV-IMAs, or one or more link defects (e.g., LOS, OOF/LOF, AIS, or LCD), LIF defects… |
| 1.3.6.1.4.1.353.5.7.1.1.11.1.5 | ColumnimaLinkIntervalFeSevErroredSecs | read-only | current | Count of one second intervals containing one or more RDI-IMA defects, except during UAS-IMA-FE condition, in one of the previous 96, individual 15 minute, inte… |
| 1.3.6.1.4.1.353.5.7.1.1.11.1.6 | ColumnimaLinkIntervalNeUnavailSecs | read-only | current | Count of unavailable seconds at near-end in one of the previous 96, individual 15 minute, intervals: unavailability begins at the onset of 10 contiguous SES-IM… |
| 1.3.6.1.4.1.353.5.7.1.1.11.1.7 | ColumnimaLinkIntervalFeUnavailSecs | read-only | current | Count of unavailable seconds at far-end in one of the previous 96, individual 15 minute, intervals: unavailability begins at the onset of 10 contiguous SES-IMA… |
| 1.3.6.1.4.1.353.5.7.1.1.11.1.8 | ColumnimaLinkIntervalNeTxUnusableSecs | read-only | current | Tx Unusable seconds: count of Unusable seconds at the near-end Tx LSM in one of the previous 96, individual 15 minute, intervals. |
| 1.3.6.1.4.1.353.5.7.1.1.11.1.9 | ColumnimaLinkIntervalNeRxUnusableSecs | read-only | current | Rx Unusable seconds: count of Unusable seconds at the near-end Rx LSM in one of the previous 96, individual 15 minute, intervals. |
| 1.3.6.1.4.1.353.5.7.1.1.11.1.10 | ColumnimaLinkIntervalFeTxUnusableSecs | read-only | current | Tx Unusable seconds at far-end: count of seconds with Tx Unusable indications from the far-end Tx LSM in one of the previous 96, individual 15 minute, interval… |
| 1.3.6.1.4.1.353.5.7.1.1.11.1.11 | ColumnimaLinkIntervalFeRxUnusableSecs | read-only | current | Rx Unusable seconds at far-end: count of seconds with Rx Unusable indications from the far-end Rx LSM in one of the previous 96, individual 15 minute, interval… |
| 1.3.6.1.4.1.353.5.7.1.1.11.1.12 | ColumnimaLinkIntervalNeTxNumFailures | read-only | current | The number of times a near-end transmit failure alarm condition has been entered on this link (i.e., some form of implementation specific transmit fault) in on… |
| 1.3.6.1.4.1.353.5.7.1.1.11.1.13 | ColumnimaLinkIntervalNeRxNumFailures | read-only | current | The number of times a near-end receive failure alarm condition has been entered on this link (i.e., LIF, LODS, RFI-IMA, Mis-Connected, or some form of implemen… |
| 1.3.6.1.4.1.353.5.7.1.1.11.1.14 | ColumnimaLinkIntervalFeTxNumFailures | read-only | current | The number of times a far-end transmit failure alarm condition has been entered on this link (i.e., Tx-Unusable-FE) in one of the previous 96, individual 15 mi… |
| 1.3.6.1.4.1.353.5.7.1.1.11.1.15 | ColumnimaLinkIntervalFeRxNumFailures | read-only | current | The number of times a far-end receive failure alarm condition has been entered on this link (i.e., Rx-Unusable-FE) in one of the previous 96, individual 15 min… |
| 1.3.6.1.4.1.353.5.7.1.1.11.1.16 | ColumnimaLinkIntervalTxStuffs | read-only | current | Count of stuff events inserted in the transmit direction in one of the previous 96, individual 15 minute, intervals. This is an optional attribute. |
| 1.3.6.1.4.1.353.5.7.1.1.11.1.17 | ColumnimaLinkIntervalRxStuffs | read-only | current | Count of stuff events detected in the receive direction in one of the previous 96, individual 15 minute, intervals. This is an optional attribute. |
| 1.3.6.1.4.1.353.5.7.1.1.12 | TableimaLinkTotalTable | not-accessible | current | The IMA Link Total table. |
| 1.3.6.1.4.1.353.5.7.1.1.12.1 | RowimaLinkTotalEntry | not-accessible | current | An entry in the IMA Link Total table. |
| 1.3.6.1.4.1.353.5.7.1.1.12.1.1 | ColumnimaLinkTotalImaViolations | read-only | current | ICP violations: count of errored, invalid or missing ICP cells, except during SES-IMA or UAS-IMA conditions, in the previous 24 hour interval. Invalid 15 minut… |
| 1.3.6.1.4.1.353.5.7.1.1.12.1.2 | ColumnimaLinkTotalOifAnomalies | read-only | current | The number of OIF anomalies, except during SES-IMA or UAS-IMA conditions, at the near-end in the previous 24 hour interval. Invalid 15 minute intervals count a… |
| 1.3.6.1.4.1.353.5.7.1.1.12.1.3 | ColumnimaLinkTotalNeSevErroredSecs | read-only | current | Count of one second intervals containing >= 30% of the ICP cells counted as IV-IMAs, or one or more link defects (e.g., LOS, OOF/LOF, AIS, or LCD), LIF defects… |
| 1.3.6.1.4.1.353.5.7.1.1.12.1.4 | ColumnimaLinkTotalFeSevErroredSecs | read-only | current | Count of one second intervals containing one or more RDI-IMA defects, except during UAS-IMA-FE condition, in the previous 24 hour interval. Invalid 15 minute i… |
| 1.3.6.1.4.1.353.5.7.1.1.12.1.5 | ColumnimaLinkTotalNeUnavailSecs | read-only | current | Count of unavailable seconds at near-end in the previous 24 hour interval: unavailability begins at the onset of 10 contiguous SES-IMA and ends at the onset of… |
| 1.3.6.1.4.1.353.5.7.1.1.12.1.6 | ColumnimaLinkTotalFeUnavailSecs | read-only | current | Count of unavailable seconds at far-end in the previous 24 hour interval: unavailability begins at the onset of 10 contiguous SES-IMA-FE and ends at the onset … |
| 1.3.6.1.4.1.353.5.7.1.1.12.1.7 | ColumnimaLinkTotalNeTxUnusableSecs | read-only | current | Tx Unusable seconds: count of Unusable seconds at the near-end Tx LSM in the previous 24 hour interval. Invalid 15 minute intervals count as 0. |
| 1.3.6.1.4.1.353.5.7.1.1.12.1.8 | ColumnimaLinkTotalNeRxUnusableSecs | read-only | current | Rx Unusable seconds: count of Unusable seconds at the near-end Rx LSM in the previous 24 hour interval. Invalid 15 minute intervals count as 0. |
| 1.3.6.1.4.1.353.5.7.1.1.12.1.9 | ColumnimaLinkTotalFeTxUnusableSecs | read-only | current | Tx Unusable seconds at far-end: count of seconds with Tx Unusable indications from the far-end Tx LSM in the previous 24 hour interval. Invalid 15 minute inter… |
| 1.3.6.1.4.1.353.5.7.1.1.12.1.10 | ColumnimaLinkTotalFeRxUnusableSecs | read-only | current | Rx Unusable seconds at far-end: count of seconds with Rx Unusable indications from the far-end Rx LSM in the previous 24 hour interval. Invalid 15 minute inter… |
| 1.3.6.1.4.1.353.5.7.1.1.12.1.11 | ColumnimaLinkTotalNeTxNumFailures | read-only | current | The number of times a near-end transmit failure alarm condition has been entered on this link (i.e., some form of implementation specific transmit fault) in th… |
| 1.3.6.1.4.1.353.5.7.1.1.12.1.12 | ColumnimaLinkTotalNeRxNumFailures | read-only | current | The number of times a near-end receive failure alarm condition has been entered on this link (i.e., LIF, LODS, RFI-IMA, Mis-Connected, or some form of implemen… |
| 1.3.6.1.4.1.353.5.7.1.1.12.1.13 | ColumnimaLinkTotalFeTxNumFailures | read-only | current | The number of times a far-end transmit failure alarm condition has been entered on this link (i.e., Tx-Unusable-FE) in the previous 24 hour interval. Invalid 1… |
| 1.3.6.1.4.1.353.5.7.1.1.12.1.14 | ColumnimaLinkTotalFeRxNumFailures | read-only | current | The number of times a far-end receive failure alarm condition has been entered on this link (i.e., Rx-Unusable-FE) in the previous 24 hour interval. Invalid 15… |
| 1.3.6.1.4.1.353.5.7.1.1.12.1.15 | ColumnimaLinkTotalTxStuffs | read-only | current | Count of stuff events inserted in the transmit direction in the previous 24 hour interval. Invalid 15 minute intervals count as 0. This is an optional attribut… |
| 1.3.6.1.4.1.353.5.7.1.1.12.1.16 | ColumnimaLinkTotalRxStuffs | read-only | current | Count of stuff events detected in the receive direction in the previous 24 hour interval. Invalid 15 minute intervals count as 0. This is an optional attribute. |
| 1.3.6.1.4.1.353.5.7.1.2 | NodeatmfImaMibTraps | |||
| 1.3.6.1.4.1.353.5.7.1.2.0 | NodeatmfImaMibTrapPrefix | |||
| 1.3.6.1.4.1.353.5.7.1.2.0.1 | NotificationimaFailureAlarm | current | The imaFailureAlarm provides a method for an agent implementing IMA to notify an NMS of an alarm condition. | |
| 1.3.6.1.4.1.353.5.7.1.3 | NodeatmfImaMibConformance | |||
| 1.3.6.1.4.1.353.5.7.1.3.1 | NodeatmfImaMibGroups | |||
| 1.3.6.1.4.1.353.5.7.1.3.1.1 | GroupimaGroupGroup | current | A set of objects providing configuration and status information for an IMA group definition. | |
| 1.3.6.1.4.1.353.5.7.1.3.1.2 | GroupimaLinkGroup | current | A set of objects providing status information for an IMA link. | |
| 1.3.6.1.4.1.353.5.7.1.3.1.3 | GroupimaGroupMappingTableGroup | current | A table mapping the 'ifIndex' values of 'imaGroupIfIndex' to the 'imaGroupIndex' values of the corresponding IMA group. | |
| 1.3.6.1.4.1.353.5.7.1.3.1.4 | GroupimaTestPatternGroup | current | Objects in the imaGroupTable and imaLinkTable which control and report on the Test Pattern Procedure. These objects must be implemented if the IMA Test Pattern… | |
| 1.3.6.1.4.1.353.5.7.1.3.1.5 | GroupimaAlarmGroup | current | Objects used in the imaFailureAlarm notification. | |
| 1.3.6.1.4.1.353.5.7.1.3.1.6 | GroupimaGroupIntervalGroup | current | Objects containing interval statistics for an IMA group. | |
| 1.3.6.1.4.1.353.5.7.1.3.1.7 | GroupimaLinkIntervalGroup | current | Objects containing interval statistics for an IMA link. | |
| 1.3.6.1.4.1.353.5.7.1.3.1.8 | GroupimaNotificationsGroup | current | Notifications that must be implemented for IMA groups and links. | |
| 1.3.6.1.4.1.353.5.7.1.3.2 | NodeatmfImaMibCompliances | |||
| 1.3.6.1.4.1.353.5.7.1.3.2.1 | ComplianceatmfImaMibCompliance | read-only | current | The compliance statement for network elements implementing ATM Forum Inverse Multiplexing for ATM (IMA) interfaces. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| ImaAlarmStatus | INTEGER { cleared(1), declared(2) } | current | A qualification of the IMA trap which indicates if the condition causing the trap has been detected (declared) or is no longer present (cleared). |
| ImaAlarmType | INTEGER { imaAlarmLinkLif(1), imaAlarmLinkLods(2), imaAlarmLinkRfi(3), imaAlarmLinkTxMisConnect(4), imaAlarmLinkRxMisConnect(5), imaAlarmLinkTxFault(6), imaAlarmLinkRxFault(7), imaAlarmLinkTxUnusableFe(8), imaAlarmLinkRxUnusableFe(9), imaAlarmGroupStartupFe(10), imaAlarmGroupCfgAbort(11), imaAlarmGroupCfgAbortFe(12), imaAlarmGroupInsuffLinks(13), imaAlarmGroupInsuffLinksFe(14), imaAlarmGroupBlockedFe(15), imaAlarmGroupTimingSynch(16) } | current | An identification of the event that caused the generation of the IMA trap. |
| ImaFrameLength | INTEGER { m32(32), m64(64), m128(128), m256(256) } | current | Length of the IMA frames. |
| ImaGroupFailureStatus | INTEGER { noFailure(1), startUpNe(2), startUpFe(3), invalidMValueNe(4), invalidMValueFe(5), failedAssymetricNe(6), failedAssymetricFe(7), insufficientLinksNe(8), insufficientLinksFe(9), blockedNe(10), blockedFe(11), otherFailure(12), invalidImaVersionNe(13), invalidImaVersionFe(14) } | current | Failure reason of an IMA group. |
| ImaGroupState | INTEGER { notConfigured(1), startUp(2), startUpAck(3), configAbortUnsupportedM(4), configAbortIncompatibleSymmetry(5), configAbortOther(6), insufficientLinks(7), blocked(8), operational(9), configAbortUnsupportedImaVersion(10) } | current | State of the IMA group. |
| ImaGroupSymmetry | INTEGER { symmetricOperation(1), asymmetricOperation(2), asymmetricConfiguration(3) } | current | The group symmetry mode adjusted during the group start-up. |
| ImaGroupTxClkMode | INTEGER { ctc(1), itc(2) } | current | Indicate the transmit clock mode of the IMA group. There are two possible modes: the Common Transmit Clock (CTC) and the Independent Transmit Clock (ITC). The CTC mode corresponds to the case when the transmit clock of … |
| ImaLinkFailureStatus | INTEGER { noFailure(1), imaLinkFailure(2), lifFailure(3), lodsFailure(4), misConnected(5), blocked(6), fault(7), farEndTxLinkUnusable(8), farEndRxLinkUnusable(9) } | current | Local failure status of a link belonging to an IMA group. |
| ImaLinkState | INTEGER { notInGroup(1), unusableNoGivenReason(2), unusableFault(3), unusableMisconnected(4), unusableInhibited(5), unusableFailed(6), usable(7), active(8) } | current | State of a link belonging to an IMA group. |
| ImaTestProcStatus | INTEGER { disabled(1), operating(2), linkFail(3) } | current | States of the Test Pattern Procedure. |
| MilliSeconds | Integer32 | current | Time in milliseconds |