IMM-MIB
1085 objects
No module-level DESCRIPTION found.
Imported Objects
| RFC-1212 | OBJECT-TYPE |
| RFC-1215 | TRAP-TYPE |
| RFC1155-SMI | 2011 Gauge enterprises IpAddress |
| RFC1213-MIB | DisplayString |
| SNMPv2-TC | -- TEXTUAL-CONVENTION |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2 | Nodeibm | |||
| 1.3.6.1.4.1.2.3 | NodeibmAgents | |||
| 1.3.6.1.4.1.2.3.51 | NodenetfinitySupportProcessorAgent | |||
| 1.3.6.1.4.1.2.3.51.3 | NodeibmIntegratedManagementModuleMIB | |||
| 1.3.6.1.4.1.2.3.51.3.1 | Nodemonitors | |||
| 1.3.6.1.4.1.2.3.51.3.1.1 | Nodetemperature | |||
| 1.3.6.1.4.1.2.3.51.3.1.1.1 | ScalartempNumber | read-only | mandatory | The present number of rows in the temperature table. |
| 1.3.6.1.4.1.2.3.51.3.1.1.2 | TabletempTable | not-accessible | mandatory | This table contains temperature measurement information. |
| 1.3.6.1.4.1.2.3.51.3.1.1.2.1 | RowtempEntry | not-accessible | mandatory | Each row contains parameters related to a temperature measurement channel. |
| 1.3.6.1.4.1.2.3.51.3.1.1.2.1.1 | ColumntempIndex | read-only | mandatory | This column is used to identify a particular temperature measurement channel. |
| 1.3.6.1.4.1.2.3.51.3.1.1.2.1.2 | ColumntempDescr | read-only | mandatory | A description of the temperature measurement channel. |
| 1.3.6.1.4.1.2.3.51.3.1.1.2.1.3 | ColumntempReading | read-only | mandatory | The measured temperature. |
| 1.3.6.1.4.1.2.3.51.3.1.1.2.1.4 | ColumntempNominalReading | read-only | mandatory | The nominal temperature, if available. |
| 1.3.6.1.4.1.2.3.51.3.1.1.2.1.5 | ColumntempNonRecovLimitHigh | read-only | mandatory | The non-recoverable limit for the measured temperature. If the measured value rises above this limit a trap is sent. |
| 1.3.6.1.4.1.2.3.51.3.1.1.2.1.6 | ColumntempCritLimitHigh | read-only | mandatory | The critical limit for the measured temperature. If the measured value rises above this limit a trap is sent. |
| 1.3.6.1.4.1.2.3.51.3.1.1.2.1.7 | ColumntempNonCritLimitHigh | read-only | mandatory | The non-critical limit for the measured temperature. If the measured value rises above this limit a trap is sent. |
| 1.3.6.1.4.1.2.3.51.3.1.1.2.1.8 | ColumntempNonRecovLimitLow | read-only | mandatory | The non-recoverable limit for the measured temperature. If the measured value falls below this limit a trap is sent. |
| 1.3.6.1.4.1.2.3.51.3.1.1.2.1.9 | ColumntempCritLimitLow | read-only | mandatory | The critical limit for the measured temperature. If the measured value falls below this limit a trap is sent. |
| 1.3.6.1.4.1.2.3.51.3.1.1.2.1.10 | ColumntempNonCritLimitLow | read-only | mandatory | The non-critical limit for the measured temperature. If the measured value falls below this limit a trap is sent. |
| 1.3.6.1.4.1.2.3.51.3.1.1.2.1.11 | ColumntempHealthStatus | read-only | mandatory | A description of the temperature component status. |
| 1.3.6.1.4.1.2.3.51.3.1.2 | Nodevoltage | |||
| 1.3.6.1.4.1.2.3.51.3.1.2.1 | ScalarvoltNumber | read-only | mandatory | The present number of rows in the voltage table. |
| 1.3.6.1.4.1.2.3.51.3.1.2.2 | TablevoltTable | not-accessible | mandatory | This table contains voltage measurement information. |
| 1.3.6.1.4.1.2.3.51.3.1.2.2.1 | RowvoltEntry | not-accessible | mandatory | Each row contains parameters related to a voltage measurement channel. |
| 1.3.6.1.4.1.2.3.51.3.1.2.2.1.1 | ColumnvoltIndex | read-only | mandatory | This column is used to identify a particular voltage measurement channel. |
| 1.3.6.1.4.1.2.3.51.3.1.2.2.1.2 | ColumnvoltDescr | read-only | mandatory | A description of the voltage measurement channel. |
| 1.3.6.1.4.1.2.3.51.3.1.2.2.1.3 | ColumnvoltReading | read-only | mandatory | The measured voltage. |
| 1.3.6.1.4.1.2.3.51.3.1.2.2.1.4 | ColumnvoltNominalReading | read-only | mandatory | The nominal voltage, if available. |
| 1.3.6.1.4.1.2.3.51.3.1.2.2.1.5 | ColumnvoltNonRecovLimitHigh | read-only | mandatory | The high non-recoverable limit for the measured voltage. If the measured value falls above this limit a trap is sent. |
| 1.3.6.1.4.1.2.3.51.3.1.2.2.1.6 | ColumnvoltCritLimitHigh | read-only | mandatory | The high critical limit for the measured voltage. If the measured value rises above this limit a trap is sent. |
| 1.3.6.1.4.1.2.3.51.3.1.2.2.1.7 | ColumnvoltNonCritLimitHigh | read-only | mandatory | The high non-critical limit for the measured voltage. If the measured value rises above this limit a trap is sent. |
| 1.3.6.1.4.1.2.3.51.3.1.2.2.1.8 | ColumnvoltNonRecovLimitLow | read-only | mandatory | The low non-recoverable limit for the measured voltage. If the measured value falls below this limit a trap is sent. |
| 1.3.6.1.4.1.2.3.51.3.1.2.2.1.9 | ColumnvoltCritLimitLow | read-only | mandatory | The low critical limit for the measured voltage. If the measured value falls below this limit a trap is sent. |
| 1.3.6.1.4.1.2.3.51.3.1.2.2.1.10 | ColumnvoltNonCritLimitLow | read-only | mandatory | The low non-critical limit for the measured voltage. If the measured value falls below this limit a trap is sent. |
| 1.3.6.1.4.1.2.3.51.3.1.2.2.1.11 | ColumnvoltHealthStatus | read-only | mandatory | A description of the voltage component status. |
| 1.3.6.1.4.1.2.3.51.3.1.3 | Nodefans | |||
| 1.3.6.1.4.1.2.3.51.3.1.3.1 | ScalarfanNumber | read-only | mandatory | The present number of rows in the fan table. |
| 1.3.6.1.4.1.2.3.51.3.1.3.2 | TablefanTable | not-accessible | mandatory | This table contains fan information. |
| 1.3.6.1.4.1.2.3.51.3.1.3.2.1 | RowfanEntry | not-accessible | mandatory | Each row contains parameters related to a fan. |
| 1.3.6.1.4.1.2.3.51.3.1.3.2.1.1 | ColumnfanIndex | read-only | mandatory | This column is used to identify a particular fan. |
| 1.3.6.1.4.1.2.3.51.3.1.3.2.1.2 | ColumnfanDescr | read-only | mandatory | A description of the fan measurement channel. |
| 1.3.6.1.4.1.2.3.51.3.1.3.2.1.3 | ColumnfanSpeed | read-only | mandatory | Fan speed expressed in percent(%) of maximum RPM. An octet string expressed as 'ddd% of maximum' where: d is a decimal digit or blank space for a leading zero.… |
| 1.3.6.1.4.1.2.3.51.3.1.3.2.1.4 | ColumnfanNonRecovLimitHigh | read-only | mandatory | The high non-recoverable limit for the measured fan. If the measured value falls above this limit a trap is sent. |
| 1.3.6.1.4.1.2.3.51.3.1.3.2.1.5 | ColumnfanCritLimitHigh | read-only | mandatory | The high critical limit for the measured fan. If the measured value rises above this limit a trap is sent. |
| 1.3.6.1.4.1.2.3.51.3.1.3.2.1.6 | ColumnfanNonCritLimitHigh | read-only | mandatory | The high non-critical limit for the measured fan. If the measured value rises above this limit a trap is sent. |
| 1.3.6.1.4.1.2.3.51.3.1.3.2.1.7 | ColumnfanNonRecovLimitLow | read-only | mandatory | The low non-recoverable limit for the measured fan. If the measured value falls below this limit a trap is sent. |
| 1.3.6.1.4.1.2.3.51.3.1.3.2.1.8 | ColumnfanCritLimitLow | read-only | mandatory | The low critical limit for the measured fan. If the measured value falls below this limit a trap is sent. |
| 1.3.6.1.4.1.2.3.51.3.1.3.2.1.9 | ColumnfanNonCritLimitLow | read-only | mandatory | The low non-critical limit for the measured fan. If the measured value falls below this limit a trap is sent. |
| 1.3.6.1.4.1.2.3.51.3.1.3.2.1.10 | ColumnfanHealthStatus | read-only | mandatory | A description of the fan component status. |
| 1.3.6.1.4.1.2.3.51.3.1.4 | NodesystemHealth | |||
| 1.3.6.1.4.1.2.3.51.3.1.4.1 | ScalarsystemHealthStat | read-only | mandatory | Indicates status of system health for the system in which the IMM resides. Value of 'nonRecoverable' indicates a severe error has occurred and the system may n… |
| 1.3.6.1.4.1.2.3.51.3.1.4.2 | TablesystemHealthSummaryTable | not-accessible | mandatory | Table of System Health summary. Contains more detailed information about the reasons for the overall system health status. |
| 1.3.6.1.4.1.2.3.51.3.1.4.2.1 | RowsystemHealthSummaryEntry | not-accessible | mandatory | System Health Summary entry |
| 1.3.6.1.4.1.2.3.51.3.1.4.2.1.1 | ColumnsystemHealthSummaryIndex | read-only | mandatory | System health summary index. |
| 1.3.6.1.4.1.2.3.51.3.1.4.2.1.2 | ColumnsystemHealthSummarySeverity | read-only | mandatory | System health summary severity. |
| 1.3.6.1.4.1.2.3.51.3.1.4.2.1.3 | ColumnsystemHealthSummaryDescription | read-only | mandatory | System health summary description. |
| 1.3.6.1.4.1.2.3.51.3.1.5 | NodevpdInformation | |||
| 1.3.6.1.4.1.2.3.51.3.1.5.1 | TableimmVpdTable | not-accessible | mandatory | Table of IMM VPD. |
| 1.3.6.1.4.1.2.3.51.3.1.5.1.1 | RowimmVpdEntry | not-accessible | mandatory | iMBC VPD entry. |
| 1.3.6.1.4.1.2.3.51.3.1.5.1.1.1 | ColumnimmVpdIndex | read-only | mandatory | IMM VPD index. |
| 1.3.6.1.4.1.2.3.51.3.1.5.1.1.2 | ColumnimmVpdType | read-only | mandatory | IMM VPD Type. Indicates either Bios or Diag or spFimware VPD |
| 1.3.6.1.4.1.2.3.51.3.1.5.1.1.3 | ColumnimmVpdVersionString | read-only | mandatory | IMM VPD Version Number of the software(Bios/Diag/spFirmware). For IMM2 the string contains both the Build ID and the Version Number, for example, like '1AOO3A … |
| 1.3.6.1.4.1.2.3.51.3.1.5.1.1.4 | ColumnimmVpdReleaseDate | read-only | mandatory | IMM VPD Release Date of when the software(Bios/Diag/spFirmware) was released. |
| 1.3.6.1.4.1.2.3.51.3.1.5.2 | NodemachineVpd | |||
| 1.3.6.1.4.1.2.3.51.3.1.5.2.1 | NodemachineLevelVpd | |||
| 1.3.6.1.4.1.2.3.51.3.1.5.2.1.1 | ScalarmachineLevelVpdMachineType | read-only | mandatory | Machine type VPD information. |
| 1.3.6.1.4.1.2.3.51.3.1.5.2.1.2 | ScalarmachineLevelVpdMachineModel | read-only | mandatory | Machine model VPD information. |
| 1.3.6.1.4.1.2.3.51.3.1.5.2.1.3 | ScalarmachineLevelSerialNumber | read-only | mandatory | Machine serial number VPD information. |
| 1.3.6.1.4.1.2.3.51.3.1.5.2.1.4 | ScalarmachineLevelUUID | read-only | mandatory | Machine UUID(Universal Unique ID information). |
| 1.3.6.1.4.1.2.3.51.3.1.5.2.1.5 | ScalarmachineLevelProductName | read-only | mandatory | Machine Product Name (e.g. System x3650 M2). |
| 1.3.6.1.4.1.2.3.51.3.1.5.17 | TablesystemComponentLevelVpdTable | not-accessible | mandatory | Table of the system component hardware VPD information. View as a table and not as individual entries for consistent results. |
| 1.3.6.1.4.1.2.3.51.3.1.5.17.1 | RowsystemComponentLevelVpdEntry | not-accessible | mandatory | System component hardware VPD entry. View as a table and not as individual entries for consistent results. |
| 1.3.6.1.4.1.2.3.51.3.1.5.17.1.1 | ColumncomponentLevelVpdIndex | read-only | mandatory | System component level VPD index. View as a table and not as individual entries for consistent results. |
| 1.3.6.1.4.1.2.3.51.3.1.5.17.1.2 | ColumncomponentLevelVpdFruNumber | read-only | mandatory | System component level VPD FRU number. View as a table and not as individual entries for consistent results. |
| 1.3.6.1.4.1.2.3.51.3.1.5.17.1.3 | ColumncomponentLevelVpdFruName | read-only | mandatory | System component level VPD FRU name. View as a table and not as individual entries for consistent results. |
| 1.3.6.1.4.1.2.3.51.3.1.5.17.1.4 | ColumncomponentLevelVpdSerialNumber | read-only | mandatory | System component level VPD serial number. View as a table and not as individual entries for consistent results. |
| 1.3.6.1.4.1.2.3.51.3.1.5.17.1.5 | ColumncomponentLevelVpdManufacturingId | read-only | mandatory | System component level VPD manufacturing ID. View as a table and not as individual entries for consistent results. |
| 1.3.6.1.4.1.2.3.51.3.1.5.18 | TablesystemComponentLevelVpdTrackingTable | not-accessible | mandatory | Table of system component hardware VPD tracking activity log. View as a table and not as individual entries for consistent results. |
| 1.3.6.1.4.1.2.3.51.3.1.5.18.1 | RowsystemComponentLevelVpdTrackingEntry | not-accessible | mandatory | System component hardware VPD tracking activity log entry. View as a table and not as individual entries for consistent results. |
| 1.3.6.1.4.1.2.3.51.3.1.5.18.1.1 | ColumncomponentLevelVpdTrackingIndex | read-only | mandatory | System component level VPD tracking activity log index. View as a table and not as individual entries for consistent results. |
| 1.3.6.1.4.1.2.3.51.3.1.5.18.1.2 | ColumncomponentLevelVpdTrackingFruNumber | read-only | mandatory | System component level VPD tracking activity log FRU number. View as a table and not as individual entries for consistent results. |
| 1.3.6.1.4.1.2.3.51.3.1.5.18.1.3 | ColumncomponentLevelVpdTrackingFruName | read-only | mandatory | System component level VPD tracking activity log FRU name. View as a table and not as individual entries for consistent results. |
| 1.3.6.1.4.1.2.3.51.3.1.5.18.1.4 | ColumncomponentLevelVpdTrackingSerialNumber | read-only | mandatory | System component level VPD tracking activity log serial number. View as a table and not as individual entries for consistent results. |
| 1.3.6.1.4.1.2.3.51.3.1.5.18.1.5 | ColumncomponentLevelVpdTrackingManufacturingId | read-only | mandatory | System component level VPD tracking activity log manufacturing ID. View as a table and not as individual entries for consistent results. |
| 1.3.6.1.4.1.2.3.51.3.1.5.18.1.6 | ColumncomponentLevelVpdTrackingAction | read-only | mandatory | System component level VPD tracking activity log action(added/removed). View as a table and not as individual entries for consistent results. |
| 1.3.6.1.4.1.2.3.51.3.1.5.18.1.7 | ColumncomponentLevelVpdTrackingTimestamp | read-only | mandatory | System component level VPD tracking activity log timestanp. View as a table and not as individual entries for consistent results. |
| 1.3.6.1.4.1.2.3.51.3.1.5.19 | TablehostMACAddressTable | not-accessible | mandatory | Table of MAC addresses of the host NICs. For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.3.1.5.19.1 | RowhostMACAddressEntry | not-accessible | mandatory | Host MAC address entry. For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.3.1.5.19.1.1 | ColumnhostMACAddressIndex | read-only | mandatory | Host MAC address index. View as a table and not as individual entries for consistent results. |
| 1.3.6.1.4.1.2.3.51.3.1.5.19.1.2 | ColumnhostMACAddressDescription | read-only | mandatory | Description of the MAC Address entry. View as a table and not as individual entries for consistent results. |
| 1.3.6.1.4.1.2.3.51.3.1.5.19.1.3 | ColumnhostMACAddress | read-only | mandatory | Host MAC address must be a hexadecimal value between 000000000000 - FFFFFFFFFFFF. This value must be in the form XX:XX:XX:XX:XX:XX View as a table and not as i… |
| 1.3.6.1.4.1.2.3.51.3.1.5.20 | TablesystemCPUVpdTable | not-accessible | mandatory | Table of the system CPU VPD information. View as a table and not as individual entries for consistent results. |
| 1.3.6.1.4.1.2.3.51.3.1.5.20.1 | RowsystemCPUVpdEntry | not-accessible | mandatory | System CPU VPD entry. View as a table and not as individual entries for consistent results. |
| 1.3.6.1.4.1.2.3.51.3.1.5.20.1.1 | ColumncpuVpdIndex | read-only | mandatory | System CPU level VPD index. View as a table and not as individual entries for consistent results. |
| 1.3.6.1.4.1.2.3.51.3.1.5.20.1.2 | ColumncpuVpdDescription | read-only | mandatory | System CPU Description. View as a table and not as individual entries for consistent results. |
| 1.3.6.1.4.1.2.3.51.3.1.5.20.1.3 | ColumncpuVpdSpeed | read-only | mandatory | System cpu speed in MHz. View as a table and not as individual entries for consistent results. |
| 1.3.6.1.4.1.2.3.51.3.1.5.20.1.4 | ColumncpuVpdIdentifier | read-only | mandatory | System CPU Identifier. View as a table and not as individual entries for consistent results. |
| 1.3.6.1.4.1.2.3.51.3.1.5.20.1.5 | ColumncpuVpdType | read-only | mandatory | System cpu Type. View as a table and not as individual entries for consistent results. |
| 1.3.6.1.4.1.2.3.51.3.1.5.20.1.6 | ColumncpuVpdFamily | read-only | mandatory | System cpu Family. View as a table and not as individual entries for consistent results. |
| 1.3.6.1.4.1.2.3.51.3.1.5.20.1.7 | ColumncpuVpdCores | read-only | mandatory | System cpu number of cores. View as a table and not as individual entries for consistent results. |
| 1.3.6.1.4.1.2.3.51.3.1.5.20.1.8 | ColumncpuVpdThreads | read-only | mandatory | System cpu number of threads. View as a table and not as individual entries for consistent results. |
| 1.3.6.1.4.1.2.3.51.3.1.5.20.1.9 | ColumncpuVpdVoltage | read-only | mandatory | System cpu voltage in millivolts (1125 = 1.125 volts). View as a table and not as individual entries for consistent results. |
| 1.3.6.1.4.1.2.3.51.3.1.5.20.1.10 | ColumncpuVpdDataWidth | read-only | mandatory | System cpu data width in bits. View as a table and not as individual entries for consistent results. |
| 1.3.6.1.4.1.2.3.51.3.1.5.20.1.11 | ColumncpuVpdHealthStatus | read-only | mandatory | System cpu health status. View as a table and not as individual entries for consistent results. |
| 1.3.6.1.4.1.2.3.51.3.1.5.20.1.12 | ColumncpuVpdCpuModel | read-only | mandatory | System cpu model. View as a table and not as individual entries for consistent results. |
| 1.3.6.1.4.1.2.3.51.3.1.5.21 | TablesystemMemoryVpdTable | not-accessible | mandatory | Table of the system Memory VPD information. View as a table and not as individual entries for consistent results. |
| 1.3.6.1.4.1.2.3.51.3.1.5.21.1 | RowsystemMemoryVpdEntry | not-accessible | mandatory | System Memory VPD entry. View as a table and not as individual entries for consistent results. |
| 1.3.6.1.4.1.2.3.51.3.1.5.21.1.1 | ColumnmemoryVpdIndex | read-only | mandatory | System Memory level VPD index. View as a table and not as individual entries for consistent results. |
| 1.3.6.1.4.1.2.3.51.3.1.5.21.1.2 | ColumnmemoryVpdDescription | read-only | mandatory | System memory Description (e.g. DIMM 1). View as a table and not as individual entries for consistent results. |
| 1.3.6.1.4.1.2.3.51.3.1.5.21.1.3 | ColumnmemoryVpdPartNumber | read-only | mandatory | System Memory Part Number. View as a table and not as individual entries for consistent results. |
| 1.3.6.1.4.1.2.3.51.3.1.5.21.1.4 | ColumnmemoryVpdFRUSerialNumber | read-only | mandatory | System memory Serial Number. View as a table and not as individual entries for consistent results. |
| 1.3.6.1.4.1.2.3.51.3.1.5.21.1.5 | ColumnmemoryVpdManufactureDate | read-only | mandatory | System memory Manufacture Date in week/year format (e.g. 3609). View as a table and not as individual entries for consistent results. |
| 1.3.6.1.4.1.2.3.51.3.1.5.21.1.6 | ColumnmemoryVpdType | read-only | mandatory | System memory Type (e.g. DDR III SDRAM). View as a table and not as individual entries for consistent results. |
| 1.3.6.1.4.1.2.3.51.3.1.5.21.1.7 | ColumnmemoryVpdSize | read-only | mandatory | System memory size in GigaBytes. View as a table and not as individual entries for consistent results. |
| 1.3.6.1.4.1.2.3.51.3.1.5.21.1.8 | ColumnmemoryHealthStatus | read-only | mandatory | A description of the memory component status. |
| 1.3.6.1.4.1.2.3.51.3.1.5.21.1.9 | ColumnmemoryConfigSpeed | read-only | mandatory | System configured memory clock speed in MHz. View as a table and not as individual entries for consistent results. |
| 1.3.6.1.4.1.2.3.51.3.1.5.21.1.10 | ColumnmemoryRatedSpeed | read-only | mandatory | System rated memory clock speed in MB/s. View as a table and not as individual entries for consistent results. |
| 1.3.6.1.4.1.2.3.51.3.1.6 | Nodeusers | |||
| 1.3.6.1.4.1.2.3.51.3.1.6.1 | NodeimmUsers | |||
| 1.3.6.1.4.1.2.3.51.3.1.6.1.1 | TablecurrentlyLoggedInTable | not-accessible | mandatory | Table of IMM users currently logged in. |
| 1.3.6.1.4.1.2.3.51.3.1.6.1.1.1 | RowcurrentlyLoggedInEntry | not-accessible | mandatory | IMM users currently logged in entries. |
| 1.3.6.1.4.1.2.3.51.3.1.6.1.1.1.1 | ColumncurrentlyLoggedInEntryIndex | read-only | mandatory | Index for IMM users currently logged in. |
| 1.3.6.1.4.1.2.3.51.3.1.6.1.1.1.2 | ColumncurrentlyLoggedInEntryUserId | read-only | mandatory | Name for IMM users currently logged in. |
| 1.3.6.1.4.1.2.3.51.3.1.6.1.1.1.3 | ColumncurrentlyLoggedInEntryAccMethod | read-only | mandatory | Access method for IMM users currently logged in. |
| 1.3.6.1.4.1.2.3.51.3.1.8 | Nodeleds | |||
| 1.3.6.1.4.1.2.3.51.3.1.8.1 | ScalaridentityLED | read-write | mandatory | Indicates whether the front panel identity LED is on,off, or blinking and allows user to change it. |
| 1.3.6.1.4.1.2.3.51.3.1.8.2 | TableallLEDsTable | not-accessible | mandatory | Table of LEDs detailed information. |
| 1.3.6.1.4.1.2.3.51.3.1.8.2.1 | RowallLEDsEntry | not-accessible | mandatory | LEDs Details entry |
| 1.3.6.1.4.1.2.3.51.3.1.8.2.1.1 | ColumnledIndex | read-only | mandatory | The LED index number. For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.3.1.8.2.1.2 | ColumnledIdentifier | read-only | mandatory | The unique identifier for this LED For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.3.1.8.2.1.4 | ColumnledLabel | read-only | mandatory | Text label for a LED. For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.3.1.8.2.1.5 | ColumnledState | read-only | mandatory | Text description which denotes color or on/off/blink state for a LED. For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.3.1.8.2.1.6 | ColumnledColor | read-only | mandatory | Color of this LED. For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.3.1.8.3 | ScalarinformationLED | read-write | mandatory | Indicates whether the front panel Information LED is on,off, or blinking and allows user to change it. The only value the user is allowed to enter is 0 for off… |
| 1.3.6.1.4.1.2.3.51.3.1.9 | NodeosFailureCapture | |||
| 1.3.6.1.4.1.2.3.51.3.1.9.1 | ScalarosFailureCaptureTftpServer | read-write | mandatory | To save the OS Failure screen if one has been captured, set the IP address or host name of the TFTP server where the file should be transferred. The address mu… |
| 1.3.6.1.4.1.2.3.51.3.1.9.2 | ScalarosFailureCaptureFileName | read-write | mandatory | File name of the saved capture file on the target system. |
| 1.3.6.1.4.1.2.3.51.3.1.9.3 | ScalarosFailureCaptureSaveStart | read-write | mandatory | Start saving the configuration file to the specified target file and system. The file will exist if the OS Hang or OS Loader watchdog is enabled and been tripp… |
| 1.3.6.1.4.1.2.3.51.3.1.9.4 | ScalarosFailureCaptureSaveStatus | read-only | mandatory | Get the status of the last save operation which was initiated through SNMP method. Returns nocapture(2) if there is no OS Failure capture screen to save. |
| 1.3.6.1.4.1.2.3.51.3.1.10 | NodefuelGauge | |||
| 1.3.6.1.4.1.2.3.51.3.1.10.1 | NodefuelGaugeInformation | |||
| 1.3.6.1.4.1.2.3.51.3.1.10.1.1 | ScalarfuelGaugePowerCappingPolicySetting | read-write | mandatory | Power Capping Policy. No Power Limit - The maximum power limit will be determined by the active Power Redundancy policy. Static Power Limit - Sets the overall … |
| 1.3.6.1.4.1.2.3.51.3.1.10.1.2 | ScalarfuelGaugeStaticPowerPcapSoftMin | read-only | mandatory | This field displays power capping soft minimum value. |
| 1.3.6.1.4.1.2.3.51.3.1.10.1.3 | ScalarfuelGaugeStaticPowerPcapMin | read-only | mandatory | This field displays power capping minimum value. |
| 1.3.6.1.4.1.2.3.51.3.1.10.1.4 | ScalarfuelGaugeStaticPowerPcapCurrentSetting | read-write | mandatory | This field is used to display or set the current power capping value. |
| 1.3.6.1.4.1.2.3.51.3.1.10.1.5 | ScalarfuelGaugeStaticPowerPcapMax | read-only | mandatory | This field displays power capping maximum value. |
| 1.3.6.1.4.1.2.3.51.3.1.10.1.6 | ScalarfuelGaugeStaticPowerPcapMode | read-write | mandatory | This field is used to display or set the all Power Cap settings to AC or DC. |
| 1.3.6.1.4.1.2.3.51.3.1.10.1.7 | ScalarfuelGaugeSystemMaxPower | read-only | mandatory | This field displays the system maximum power available value. |
| 1.3.6.1.4.1.2.3.51.3.1.10.1.8 | ScalarfuelGaugePowerRemaining | read-only | mandatory | This field displays power remaining value. |
| 1.3.6.1.4.1.2.3.51.3.1.10.1.9 | ScalarfuelGaugeTotalPowerAvaialble | read-only | mandatory | This field displays the calculated total remaining power available value. |
| 1.3.6.1.4.1.2.3.51.3.1.10.1.10 | ScalarfuelGaugeTotalPowerInUse | read-only | mandatory | This field displays total power in use value. |
| 1.3.6.1.4.1.2.3.51.3.1.10.1.11 | ScalarfuelGaugeTotalThermalOutput | read-only | mandatory | This field displays the total thermal output value calculated from the AC power in use. |
| 1.3.6.1.4.1.2.3.51.3.1.10.1.12 | ScalarfuelGaugePowerConsumptionCpu | read-only | mandatory | This field displays the power consumption of the processors. |
| 1.3.6.1.4.1.2.3.51.3.1.10.1.13 | ScalarfuelGaugePowerConsumptionMemory | read-only | mandatory | This field displays the power consumption of the memory. |
| 1.3.6.1.4.1.2.3.51.3.1.10.1.15 | ScalarfuelGaugePowerConsumptionOther | read-only | mandatory | This field displays the power consumption of other entities than processors and memory. |
| 1.3.6.1.4.1.2.3.51.3.1.10.2 | NodepowerPolicyInformation | |||
| 1.3.6.1.4.1.2.3.51.3.1.10.2.1 | TablepowerPolicyTable | not-accessible | mandatory | Table of Power Policy information for all power domains. Reading this table information about the available power policies that can be configured and which is … |
| 1.3.6.1.4.1.2.3.51.3.1.10.2.1.1 | RowpowerPolicyEntry | not-accessible | mandatory | Power Policy Entry |
| 1.3.6.1.4.1.2.3.51.3.1.10.2.1.1.1 | ColumnpowerPolicyIndex | read-only | mandatory | The unique idenitifier of a row in the powerPolicyTable. |
| 1.3.6.1.4.1.2.3.51.3.1.10.2.1.1.2 | ColumnpowerPolicyName | read-only | mandatory | The short name of the power policy. The following are the possible names and their detailed description: Power Module Redundancy Intended for a single AC power… |
| 1.3.6.1.4.1.2.3.51.3.1.10.2.1.1.3 | ColumnpowerPolicyPwrSupplyFailureLimit | read-only | mandatory | The maximum number of power supplies that can fail in a chassis while still providing redundancy. |
| 1.3.6.1.4.1.2.3.51.3.1.10.2.1.1.4 | ColumnpowerPolicyMaxPowerLimit | read-only | mandatory | The maximum power available (in watts), based on the number of power modules and the Power Management Policy setting. |
| 1.3.6.1.4.1.2.3.51.3.1.10.2.1.1.5 | ColumnpowerPolicyEstimatedUtilization | read-only | mandatory | The estimated utilization (as a percentage) based on current power usage. |
| 1.3.6.1.4.1.2.3.51.3.1.10.2.1.1.6 | ColumnpowerPolicyActivate | read-write | mandatory | When read, this object provides the status of this power policy. If the value is enabled(1), it means this is the active power policy for the associated domain… |
| 1.3.6.1.4.1.2.3.51.3.1.10.3 | NodepowerPowerTrending | |||
| 1.3.6.1.4.1.2.3.51.3.1.10.3.1 | ScalarpowerTrendingPeriod | read-write | mandatory | Specify time period for power domain 1 power trending information table view. NOTE: This time period should be configured before displaying the following Power… |
| 1.3.6.1.4.1.2.3.51.3.1.10.3.2 | ScalarpowerTrendingPowerType | read-write | mandatory | This field is used to display or set the power type displayed in the Power Trending Table. |
| 1.3.6.1.4.1.2.3.51.3.1.10.3.3 | TablepowerTrendingSampleTable | not-accessible | mandatory | Table of Power Domain 1 Power Trending Information. |
| 1.3.6.1.4.1.2.3.51.3.1.10.3.3.1 | RowpowerTrendingSampleEntry | not-accessible | mandatory | Power Domain 1 Power Trending Sample entry. |
| 1.3.6.1.4.1.2.3.51.3.1.10.3.3.1.1 | ColumnpowerTrendingSampleIndex | read-only | mandatory | Power Trending Sample Table Index. |
| 1.3.6.1.4.1.2.3.51.3.1.10.3.3.1.2 | ColumnpowerTrendingSampleTimeStamp | read-only | mandatory | Power Trending Sample Table Timestamp. |
| 1.3.6.1.4.1.2.3.51.3.1.10.3.3.1.3 | ColumnpowerTrendingSampleAve | read-only | mandatory | Power Trending Table Average Power. |
| 1.3.6.1.4.1.2.3.51.3.1.10.3.3.1.4 | ColumnpowerTrendingSampleMin | read-only | mandatory | Power Trending Table Minimum Power. |
| 1.3.6.1.4.1.2.3.51.3.1.10.3.3.1.5 | ColumnpowerTrendingSampleMax | read-only | mandatory | Power Trending Table Maximum Power. |
| 1.3.6.1.4.1.2.3.51.3.1.11 | NodepowerModule | |||
| 1.3.6.1.4.1.2.3.51.3.1.11.1 | ScalarpowerNumber | read-only | mandatory | The present number of rows in the power module table. |
| 1.3.6.1.4.1.2.3.51.3.1.11.2 | TablepowerTable | not-accessible | mandatory | This table contains power inventory information. |
| 1.3.6.1.4.1.2.3.51.3.1.11.2.1 | RowpowerEntry | not-accessible | mandatory | Each row contains parameters related to a power module inventory channel. |
| 1.3.6.1.4.1.2.3.51.3.1.11.2.1.1 | ColumnpowerIndex | read-only | mandatory | This column is used to identify a particular power module inventory channel. |
| 1.3.6.1.4.1.2.3.51.3.1.11.2.1.2 | ColumnpowerFruName | read-only | mandatory | power module FRU name. |
| 1.3.6.1.4.1.2.3.51.3.1.11.2.1.3 | ColumnpowerPartNumber | read-only | mandatory | power module Part Number. View as a table and not as individual entries for consistent results. |
| 1.3.6.1.4.1.2.3.51.3.1.11.2.1.4 | ColumnpowerFRUNumber | read-only | mandatory | power module FRU Number. View as a table and not as individual entries for consistent results. |
| 1.3.6.1.4.1.2.3.51.3.1.11.2.1.5 | ColumnpowerFRUSerialNumber | read-only | mandatory | power module Serial Number. View as a table and not as individual entries for consistent results. |
| 1.3.6.1.4.1.2.3.51.3.1.11.2.1.6 | ColumnpowerHealthStatus | read-only | mandatory | A description of the power module status. |
| 1.3.6.1.4.1.2.3.51.3.1.12 | Nodedisks | |||
| 1.3.6.1.4.1.2.3.51.3.1.12.1 | ScalardiskNumber | read-only | mandatory | The present number of rows in the disk module table. |
| 1.3.6.1.4.1.2.3.51.3.1.12.2 | TablediskTable | not-accessible | mandatory | This table contains disk inventory information. |
| 1.3.6.1.4.1.2.3.51.3.1.12.2.1 | RowdiskEntry | not-accessible | mandatory | Each row contains parameters related to a disk module inventory channel. |
| 1.3.6.1.4.1.2.3.51.3.1.12.2.1.1 | ColumndiskIndex | read-only | mandatory | This column is used to identify a particular disk module inventory channel. |
| 1.3.6.1.4.1.2.3.51.3.1.12.2.1.2 | ColumndiskFruName | read-only | mandatory | disk module FRU name. |
| 1.3.6.1.4.1.2.3.51.3.1.12.2.1.3 | ColumndiskHealthStatus | read-only | mandatory | A description of the disk module status. |
| 1.3.6.1.4.1.2.3.51.3.1.13 | NodelocalStorage | |||
| 1.3.6.1.4.1.2.3.51.3.1.13.1 | Noderaid | |||
| 1.3.6.1.4.1.2.3.51.3.1.13.1.1 | ScalarraidOOBCapable | read-only | mandatory | If raidOOBCapable is disabled, all the RAID information is not available. |
| 1.3.6.1.4.1.2.3.51.3.1.13.1.2 | TableraidControllerTable | not-accessible | mandatory | Table of Local Storage RAID Controller information. |
| 1.3.6.1.4.1.2.3.51.3.1.13.1.2.1 | RowraidControllerEntry | not-accessible | mandatory | RAID Controller Entry. |
| 1.3.6.1.4.1.2.3.51.3.1.13.1.2.1.1 | ColumncontrollerIndex | read-only | mandatory | This column is used to identify a particular RAID controller. |
| 1.3.6.1.4.1.2.3.51.3.1.13.1.2.1.3 | ColumnctrlVPDProdName | read-only | mandatory | The Product Name of a particular RAID controller. |
| 1.3.6.1.4.1.2.3.51.3.1.13.1.2.1.4 | ColumnctrlFWPkgVersion | read-only | mandatory | The Firmware Package Version of a particular RAID controller. |
| 1.3.6.1.4.1.2.3.51.3.1.13.1.2.1.5 | ColumnctrlBatBCK | read-only | mandatory | Whether Battery Backup of a particular RAID controller is installed. |
| 1.3.6.1.4.1.2.3.51.3.1.13.1.2.1.6 | ColumnctrlVPDManufacture | read-only | mandatory | The Manufacture of a particular RAID controller. |
| 1.3.6.1.4.1.2.3.51.3.1.13.1.2.1.7 | ColumnctrlVPDUUID | read-only | mandatory | The Device ID (UUID) of a particular RAID controller. |
| 1.3.6.1.4.1.2.3.51.3.1.13.1.2.1.8 | ColumnctrlVPDMachineType | read-only | mandatory | The Model Type/Model of a particular RAID controller. |
| 1.3.6.1.4.1.2.3.51.3.1.13.1.2.1.9 | ColumnctrlVPDModel | read-only | mandatory | The Model Type/Model of a particular RAID controller. |
| 1.3.6.1.4.1.2.3.51.3.1.13.1.2.1.10 | ColumnctrlVPDSerialNo | read-only | mandatory | The Serial Number of a particular RAID controller. |
| 1.3.6.1.4.1.2.3.51.3.1.13.1.2.1.11 | ColumnctrlVPDFRUNo | read-only | mandatory | The FRU Number of a particular RAID controller. |
| 1.3.6.1.4.1.2.3.51.3.1.13.1.2.1.12 | ColumnctrlVPDPartNo | read-only | mandatory | The Part Number of a particular RAID controller. |
| 1.3.6.1.4.1.2.3.51.3.1.13.1.2.1.13 | ColumnctrlCacheMdlStatus | read-only | mandatory | The Cache Model Status of a particular RAID controller. |
| 1.3.6.1.4.1.2.3.51.3.1.13.1.2.1.14 | ColumnctrlCacheMdlMemSize | read-only | mandatory | The Cache Model Memory Size of a particular RAID controller. |
| 1.3.6.1.4.1.2.3.51.3.1.13.1.2.1.15 | ColumnctrlCacheMdlSerialNo | read-only | mandatory | The Cache Model Serial Number of a particular RAID controller. |
| 1.3.6.1.4.1.2.3.51.3.1.13.1.2.1.16 | ColumnctrlPCISlotNo | read-only | mandatory | The PCI Slot Number of a particular RAID controller. |
| 1.3.6.1.4.1.2.3.51.3.1.13.1.2.1.17 | ColumnctrlPCIBusNo | read-only | mandatory | The PCI Bus Number of a particular RAID controller. |
| 1.3.6.1.4.1.2.3.51.3.1.13.1.2.1.18 | ColumnctrlPCIDevNo | read-only | mandatory | The PCI Device Number of a particular RAID controller. |
| 1.3.6.1.4.1.2.3.51.3.1.13.1.2.1.19 | ColumnctrlPCIFuncNo | read-only | mandatory | The PCI Function Number of a particular RAID controller. |
| 1.3.6.1.4.1.2.3.51.3.1.13.1.2.1.20 | ColumnctrlPCIDevID | read-only | mandatory | The PCI Device ID of a particular RAID controller. |
| 1.3.6.1.4.1.2.3.51.3.1.13.1.2.1.21 | ColumnctrlPCISubDevID | read-only | mandatory | The PCI Subsystem Device ID of a particular RAID controller. |
| 1.3.6.1.4.1.2.3.51.3.1.13.1.2.1.22 | ColumnctrlBatBCKProdName | read-only | mandatory | The Product Name of Battery Backup of a particular RAID controller. |
| 1.3.6.1.4.1.2.3.51.3.1.13.1.2.1.23 | ColumnctrlBatBCKManufacture | read-only | mandatory | The Manufacture of Battery Backup of a particular RAID controller. |
| 1.3.6.1.4.1.2.3.51.3.1.13.1.2.1.24 | ColumnctrlBatBCKStatus | read-only | mandatory | The Status of Battery Backup of a particular RAID controller. |
| 1.3.6.1.4.1.2.3.51.3.1.13.1.2.1.25 | ColumnctrlBatBCKType | read-only | mandatory | The Battery Type of Battery Backup of a particular RAID controller. |
| 1.3.6.1.4.1.2.3.51.3.1.13.1.2.1.26 | ColumnctrlBatBCKChem | read-only | mandatory | The Chemistry of Battery Backup of a particular RAID controller. |
| 1.3.6.1.4.1.2.3.51.3.1.13.1.2.1.27 | ColumnctrlBatBCKSerialNo | read-only | mandatory | The Serial Number of Battery Backup of a particular RAID controller. |
| 1.3.6.1.4.1.2.3.51.3.1.13.1.2.1.28 | ColumnctrlBatBCKChgCap | read-only | mandatory | The Charge Capacity of Battery Backup of a particular RAID controller. |
| 1.3.6.1.4.1.2.3.51.3.1.13.1.2.1.29 | ColumnctrlBatBCKFirmware | read-only | mandatory | The Firmware Info of Battery Backup of a particular RAID controller. |
| 1.3.6.1.4.1.2.3.51.3.1.13.1.2.1.30 | ColumnctrlBatBCKDgnVoltage | read-only | mandatory | The Designed Voltage of Battery Backup of a particular RAID controller. |
| 1.3.6.1.4.1.2.3.51.3.1.13.1.2.1.31 | ColumnctrlBatBCKVoltage | read-only | mandatory | The Voltage of Battery Backup of a particular RAID controller. |
| 1.3.6.1.4.1.2.3.51.3.1.13.1.2.1.32 | ColumnctrlBatCurrent | read-only | mandatory | The Current of Battery Backup of a particular RAID controller. |
| 1.3.6.1.4.1.2.3.51.3.1.13.1.2.1.33 | ColumnctrlBatBCKDgnChgCap | read-only | mandatory | The Design Charge Capacity of Battery Backup of a particular RAID controller. |
| 1.3.6.1.4.1.2.3.51.3.1.13.1.2.1.34 | ColumnctrlBatBCKCrtTemp | read-only | mandatory | The Current degree Celsius temperature of Battery Backup of a particular RAID controller. |
| 1.3.6.1.4.1.2.3.51.3.1.13.1.2.1.35 | ColumnctrlFWNames | read-only | mandatory | All the Firmware Names of a particular RAID controller. |
| 1.3.6.1.4.1.2.3.51.3.1.13.1.2.1.36 | ColumnctrlPortDetails | read-only | mandatory | All the Port Details of a particular RAID controller, including Port Address and Port Controller Type. |
| 1.3.6.1.4.1.2.3.51.3.1.13.1.2.1.37 | ColumnctrlStoragepools | read-only | mandatory | The storage pools list of a particular RAID controller. |
| 1.3.6.1.4.1.2.3.51.3.1.13.1.2.1.38 | ColumnctrlDrives | read-only | mandatory | The Physical drives list of a particular RAID controller. |
| 1.3.6.1.4.1.2.3.51.3.1.13.1.3 | TableraidDriveTable | not-accessible | mandatory | Table of Logic Storage RAID Drive information. |
| 1.3.6.1.4.1.2.3.51.3.1.13.1.3.1 | RowraidDriveEntry | not-accessible | mandatory | RAID Drive Entry. |
| 1.3.6.1.4.1.2.3.51.3.1.13.1.3.1.1 | ColumndriveIndex | read-only | mandatory | This column is used to identify a particular RAID drive. |
| 1.3.6.1.4.1.2.3.51.3.1.13.1.3.1.3 | ColumndriveVPDProdName | read-only | mandatory | The Product Name of a particular RAID drive. |
| 1.3.6.1.4.1.2.3.51.3.1.13.1.3.1.4 | ColumndriveState | read-only | mandatory | The State of a particular RAID drive. |
| 1.3.6.1.4.1.2.3.51.3.1.13.1.3.1.5 | ColumndriveSlotNo | read-only | mandatory | The Slot No. of a particular RAID drive. |
| 1.3.6.1.4.1.2.3.51.3.1.13.1.3.1.6 | ColumndriveDeviceID | read-only | mandatory | The Device ID of a particular RAID drive. |
| 1.3.6.1.4.1.2.3.51.3.1.13.1.3.1.7 | ColumndriveDiskType | read-only | mandatory | The Disk Type of a particular RAID drive. |
| 1.3.6.1.4.1.2.3.51.3.1.13.1.3.1.8 | ColumndriveMediaType | read-only | mandatory | The Media Type of a particular RAID drive. |
| 1.3.6.1.4.1.2.3.51.3.1.13.1.3.1.9 | ColumndriveSpeed | read-only | mandatory | The Speed of a particular RAID drive. |
| 1.3.6.1.4.1.2.3.51.3.1.13.1.3.1.10 | ColumndriveCurTemp | read-only | mandatory | The Current degree Celsius temperature of a particular RAID drive. |
| 1.3.6.1.4.1.2.3.51.3.1.13.1.3.1.11 | ColumndriveHealthStataus | read-only | mandatory | The Health Status of a particular RAID drive. |
| 1.3.6.1.4.1.2.3.51.3.1.13.1.3.1.12 | ColumndriveCapacity | read-only | mandatory | The Capacity of a particular RAID drive. |
| 1.3.6.1.4.1.2.3.51.3.1.13.1.3.1.13 | ColumndriveVPDManufacture | read-only | mandatory | The Manufacture of a particular RAID drive. |
| 1.3.6.1.4.1.2.3.51.3.1.13.1.3.1.14 | ColumndriveEnclosureID | read-only | mandatory | The Enclosure ID of a particular RAID drive. |
| 1.3.6.1.4.1.2.3.51.3.1.13.1.3.1.15 | ColumndriveVPDMachineType | read-only | mandatory | The Machine type of a particular RAID drive. |
| 1.3.6.1.4.1.2.3.51.3.1.13.1.3.1.16 | ColumndriveVPDModel | read-only | mandatory | The Model of a particular RAID drive. |
| 1.3.6.1.4.1.2.3.51.3.1.13.1.3.1.17 | ColumndriveVPDSerialNo | read-only | mandatory | The Serial No. of a particular RAID drive. |
| 1.3.6.1.4.1.2.3.51.3.1.13.1.3.1.18 | ColumndriveVPDFRUNo | read-only | mandatory | The FRU No. of a particular RAID drive. |
| 1.3.6.1.4.1.2.3.51.3.1.13.1.3.1.19 | ColumndriveVPDPartNo | read-only | mandatory | The Part No. of a particular RAID drive. |
| 1.3.6.1.4.1.2.3.51.3.1.13.1.3.1.20 | ColumndriveFWNames | read-only | mandatory | All the Firmware Names of a particular RAID drive. |
| 1.3.6.1.4.1.2.3.51.3.1.13.1.3.1.21 | ColumndriveRotationRate | read-only | mandatory | The Rotation Rate of a particular RAID drive. |
| 1.3.6.1.4.1.2.3.51.3.1.13.1.3.1.22 | ColumndriveMediaErrCnt | read-only | mandatory | The Media Error Count of a particular RAID drive. |
| 1.3.6.1.4.1.2.3.51.3.1.13.1.3.1.23 | ColumndriveOtherErrCnt | read-only | mandatory | The Other Error Count of a particular RAID drive. |
| 1.3.6.1.4.1.2.3.51.3.1.13.1.3.1.24 | ColumndrivePredFailCnt | read-only | mandatory | The Predication Fail Count of a particular RAID drive. |
| 1.3.6.1.4.1.2.3.51.3.1.13.1.4 | TableraidControllerFirmwareTable | not-accessible | mandatory | Table of Logic Storage RAID Controller Firmware information. |
| 1.3.6.1.4.1.2.3.51.3.1.13.1.4.1 | RowraidFirmwareEntry | not-accessible | mandatory | RAID Firmware Entry. |
| 1.3.6.1.4.1.2.3.51.3.1.13.1.4.1.3 | ColumnctrlName | read-only | mandatory | The controller name of the firmwares. |
| 1.3.6.1.4.1.2.3.51.3.1.13.1.5 | TableraidDriveFirmwareTable | not-accessible | mandatory | Table of Logic Storage RAID Drive Firmware information. |
| 1.3.6.1.4.1.2.3.51.3.1.13.1.5.1 | RowraidDriveFirmwareEntry | not-accessible | mandatory | RAID Drive Firmware Entry. |
| 1.3.6.1.4.1.2.3.51.3.1.13.1.5.1.1 | ColumnfirmwareIndex | read-only | mandatory | This column is used to identify a particular RAID Drive firmware. |
| 1.3.6.1.4.1.2.3.51.3.1.13.1.5.1.2 | ColumnfwName | read-only | mandatory | The Name of a particular RAID Drive firmware. |
| 1.3.6.1.4.1.2.3.51.3.1.13.1.5.1.3 | ColumndriveName | read-only | mandatory | The drive name of the firmwares. |
| 1.3.6.1.4.1.2.3.51.3.1.13.1.5.1.4 | ColumnfwDescription | read-only | mandatory | The Description of a particular RAID Drive firmware. |
| 1.3.6.1.4.1.2.3.51.3.1.13.1.5.1.5 | ColumnfwManufacture | read-only | mandatory | The Manufacture of a particular RAID Drive firmware. |
| 1.3.6.1.4.1.2.3.51.3.1.13.1.5.1.6 | ColumnfwVersion | read-only | mandatory | The Version of a particular RAID Drive firmware. |
| 1.3.6.1.4.1.2.3.51.3.1.13.1.5.1.7 | ColumnfwReleaseDate | read-only | mandatory | The Release Date of a particular RAID Drive firmware. |
| 1.3.6.1.4.1.2.3.51.3.1.13.1.6 | TableraidStoragepoolTable | not-accessible | mandatory | Table of Logic Storage RAID Storagepool information. |
| 1.3.6.1.4.1.2.3.51.3.1.13.1.6.1 | RowraidStoragepoolEntry | not-accessible | mandatory | RAID Storagepool Entry. |
| 1.3.6.1.4.1.2.3.51.3.1.13.1.6.1.1 | ColumnstoragepoolIndex | read-only | mandatory | This column is used to identify a particular RAID storagepool. |
| 1.3.6.1.4.1.2.3.51.3.1.13.1.6.1.2 | ColumnstoragepoolName | read-only | mandatory | The name of a particular RAID storagepool. |
| 1.3.6.1.4.1.2.3.51.3.1.13.1.6.1.4 | ColumnstoragepoolState | read-only | mandatory | The RAID State of a particular RAID storagepool. |
| 1.3.6.1.4.1.2.3.51.3.1.13.1.6.1.5 | ColumnstoragepoolCapacity | read-only | mandatory | The Capacity of a particular RAID storagepool, including total capacity and free capacity. |
| 1.3.6.1.4.1.2.3.51.3.1.13.1.6.1.6 | ColumnstoragepoolVols | read-only | mandatory | The volumes list of a particular RAID storagepool. |
| 1.3.6.1.4.1.2.3.51.3.1.13.1.6.1.7 | ColumnstoragepoolDrives | read-only | mandatory | The physical drives list of a particular RAID storagepool. |
| 1.3.6.1.4.1.2.3.51.3.1.13.1.7 | TableraidVolumeTable | not-accessible | mandatory | Table of Logic Storage RAID Volume information. |
| 1.3.6.1.4.1.2.3.51.3.1.13.1.7.1 | RowraidVolumeEntry | not-accessible | mandatory | RAID Volume Entry. |
| 1.3.6.1.4.1.2.3.51.3.1.13.1.7.1.1 | ColumnvolumeIndex | read-only | mandatory | This column is used to identify a particular RAID volume. |
| 1.3.6.1.4.1.2.3.51.3.1.13.1.7.1.2 | ColumnvolumeName | read-only | mandatory | The Name of a particular RAID volume. |
| 1.3.6.1.4.1.2.3.51.3.1.13.1.7.1.3 | ColumncontrollerName | read-only | mandatory | The controller name of the volume. |
| 1.3.6.1.4.1.2.3.51.3.1.13.1.7.1.4 | ColumnvolumeStatus | read-only | mandatory | The Status of a particular RAID volume. |
| 1.3.6.1.4.1.2.3.51.3.1.13.1.7.1.5 | ColumnvolumeCapacity | read-only | mandatory | The Capacity of a particular RAID volume. |
| 1.3.6.1.4.1.2.3.51.3.1.13.1.7.1.6 | ColumnvolumeStripSize | read-only | mandatory | The strip size of the RAID volume. |
| 1.3.6.1.4.1.2.3.51.3.1.13.1.7.1.7 | ColumnvolumeBootable | read-only | mandatory | Whether the RAID volume is bootable. |
| 1.3.6.1.4.1.2.3.51.3.1.13.2 | Nodeflashdimm | |||
| 1.3.6.1.4.1.2.3.51.3.1.13.2.1 | ScalarfdNumber | read-only | mandatory | The present number of rows in the disk flashdimm table. |
| 1.3.6.1.4.1.2.3.51.3.1.13.2.2 | TablefdTable | not-accessible | mandatory | This table contains flashdimm inventory information. |
| 1.3.6.1.4.1.2.3.51.3.1.13.2.2.1 | RowfdEntry | not-accessible | mandatory | Each row contains parameters related to a flashdimm module inventory channel. |
| 1.3.6.1.4.1.2.3.51.3.1.13.2.2.1.1 | ColumnfdIndex | read-only | mandatory | This column is used to identify a particular flashdimm module inventory channel. |
| 1.3.6.1.4.1.2.3.51.3.1.13.2.2.1.2 | ColumnfdFruName | read-only | mandatory | flashdimm module FRU name. |
| 1.3.6.1.4.1.2.3.51.3.1.13.2.2.1.3 | ColumnfdHealthStatus | read-only | mandatory | A description of the flashdimm module health status. |
| 1.3.6.1.4.1.2.3.51.3.1.13.2.2.1.4 | ColumnfdOpState | read-only | mandatory | A description of the flashdimm module operation status. |
| 1.3.6.1.4.1.2.3.51.3.1.13.2.2.1.5 | ColumnfdCapacity | read-only | mandatory | A description of the flashdimm module capacity. |
| 1.3.6.1.4.1.2.3.51.3.1.13.2.2.1.6 | ColumnfdModelType | read-only | mandatory | A description of the flashdimm module type. |
| 1.3.6.1.4.1.2.3.51.3.1.13.2.2.1.7 | ColumnfdPartNum | read-only | mandatory | A description of the flashdimm module part number. |
| 1.3.6.1.4.1.2.3.51.3.1.13.2.2.1.8 | ColumnfdFruSerialNum | read-only | mandatory | A description of the flashdimm module serial number. |
| 1.3.6.1.4.1.2.3.51.3.1.13.2.2.1.9 | ColumnfdManufID | read-only | mandatory | A description of the flashdimm module manufacture id. |
| 1.3.6.1.4.1.2.3.51.3.1.13.2.2.1.10 | ColumnfdTemp | read-only | mandatory | A description of the flashdimm module temperature. |
| 1.3.6.1.4.1.2.3.51.3.1.13.2.2.1.11 | ColumnfdWarrWrites | read-only | mandatory | A description of the flashdimm module warranty writes. |
| 1.3.6.1.4.1.2.3.51.3.1.13.2.2.1.12 | ColumnfdWriteEndurance | read-only | mandatory | A description of the flashdimm module write endurance. |
| 1.3.6.1.4.1.2.3.51.3.1.13.2.2.1.13 | ColumnfdFwLevel | read-only | mandatory | A description of the flashdimm module status. |
| 1.3.6.1.4.1.2.3.51.3.1.14 | Nodeadapters | |||
| 1.3.6.1.4.1.2.3.51.3.1.14.1 | ScalaradapterOOBCapable | read-only | mandatory | If adapterOOBCapable is disabled, all the adapter information is not available. |
| 1.3.6.1.4.1.2.3.51.3.1.14.2 | TableadapterGenericTable | not-accessible | mandatory | Table of all adapters generic information |
| 1.3.6.1.4.1.2.3.51.3.1.14.2.1 | RowadapterGenericEntry | not-accessible | mandatory | Adapters generic information entry. |
| 1.3.6.1.4.1.2.3.51.3.1.14.2.1.1 | ColumnadapterGenericIndex | read-only | mandatory | This column is used to identify a particular PCI adapter. |
| 1.3.6.1.4.1.2.3.51.3.1.14.2.1.3 | ColumnadapterSlotNo | read-only | mandatory | This Slot No. of a particular PCI adapter |
| 1.3.6.1.4.1.2.3.51.3.1.14.2.1.4 | ColumnadapterLocation | read-only | mandatory | The Location of a particular PCI adapter. |
| 1.3.6.1.4.1.2.3.51.3.1.14.2.1.5 | ColumnadapterCardInterface | read-only | mandatory | The Card Interface of a particular PCI adapter. |
| 1.3.6.1.4.1.2.3.51.3.1.14.3 | TableadapterNetworkFunctionTable | not-accessible | mandatory | Table of Network Function information. |
| 1.3.6.1.4.1.2.3.51.3.1.14.3.1 | RowadapterNetworkFunctionEntry | not-accessible | mandatory | Network function information entry. |
| 1.3.6.1.4.1.2.3.51.3.1.14.3.1.1 | ColumnnetworkAdapterIndex | read-only | mandatory | This column is used to identify a particular network function. |
| 1.3.6.1.4.1.2.3.51.3.1.14.3.1.4 | ColumnnetworkVPDManufacturer | read-only | mandatory | The Manufacturer of a particular network function. |
| 1.3.6.1.4.1.2.3.51.3.1.14.3.1.5 | ColumnnetworkVPDUUID | read-only | mandatory | The UUID of a particular network function. |
| 1.3.6.1.4.1.2.3.51.3.1.14.3.1.6 | ColumnnetworkVPDModel | read-only | mandatory | The Model of a particular network function. |
| 1.3.6.1.4.1.2.3.51.3.1.14.3.1.7 | ColumnnetworkVPDSerialNo | read-only | mandatory | The Serial No. of a particular network function. |
| 1.3.6.1.4.1.2.3.51.3.1.14.3.1.8 | ColumnnetworkVPDFRUNo | read-only | mandatory | The FRU No. of a particular network function. |
| 1.3.6.1.4.1.2.3.51.3.1.14.3.1.9 | ColumnnetworkVPDPartNo | read-only | mandatory | The Part No. of a particular network function. |
| 1.3.6.1.4.1.2.3.51.3.1.14.3.1.10 | ColumnnetworkFoDUID | read-only | mandatory | The FoD UID of a particular network function. |
| 1.3.6.1.4.1.2.3.51.3.1.14.3.1.11 | ColumnnetworkSupportHotPlug | read-only | mandatory | Indicates whether the network function supports hot plug. |
| 1.3.6.1.4.1.2.3.51.3.1.14.3.1.12 | ColumnnetworkPhysicalPortNumber | read-only | mandatory | The Physical Port Number of a particular network function. |
| 1.3.6.1.4.1.2.3.51.3.1.14.3.1.13 | ColumnnetworkMaxPortNumber | read-only | mandatory | The Max Port Number of a particular network function. |
| 1.3.6.1.4.1.2.3.51.3.1.14.3.1.14 | ColumnnetworkPortNumber | read-only | mandatory | The Port Number of a particular network function. |
| 1.3.6.1.4.1.2.3.51.3.1.14.3.1.15 | ColumnnetworkMaxDataWidth | read-only | mandatory | The Maximum Data Width in Gbps of a particular network funtion. |
| 1.3.6.1.4.1.2.3.51.3.1.14.3.1.16 | ColumnnetworkPackageType | read-only | mandatory | The Package Type of a particular network function. |
| 1.3.6.1.4.1.2.3.51.3.1.14.3.1.17 | ColumnnetworkPCIBusNo | read-only | mandatory | The PCI Bus No. of a particular network function. |
| 1.3.6.1.4.1.2.3.51.3.1.14.3.1.18 | ColumnnetworkPCIDevNo | read-only | mandatory | The PCI Device No. of a particular network function. |
| 1.3.6.1.4.1.2.3.51.3.1.14.3.1.19 | ColumnnetworkPCIFuncNo | read-only | mandatory | The PCI Function No. of a particular network function. |
| 1.3.6.1.4.1.2.3.51.3.1.14.3.1.20 | ColumnnetworkPCIVendorId | read-only | mandatory | The PCI Vendor ID of a particular network function. |
| 1.3.6.1.4.1.2.3.51.3.1.14.3.1.21 | ColumnnetworkPCIDevId | read-only | mandatory | The PCI Device ID of a particular network function. |
| 1.3.6.1.4.1.2.3.51.3.1.14.3.1.22 | ColumnnetworkPCIDevType | read-only | mandatory | The PCI Device Type of a particular network function. |
| 1.3.6.1.4.1.2.3.51.3.1.14.3.1.23 | ColumnnetworkPCIRevId | read-only | mandatory | The PCI Revision ID of a particular network function. |
| 1.3.6.1.4.1.2.3.51.3.1.14.3.1.24 | ColumnnetworkPCISubVendorId | read-only | mandatory | The PCI Subsystem Vendor ID of a particular network function. |
| 1.3.6.1.4.1.2.3.51.3.1.14.3.1.25 | ColumnnetworkPCISubDevId | read-only | mandatory | The PCI Subsystem Device ID of a particular network function. |
| 1.3.6.1.4.1.2.3.51.3.1.14.3.1.26 | ColumnnetworkPCISlotDesignation | read-only | mandatory | The PCI Slot Designation of a particular network function. |
| 1.3.6.1.4.1.2.3.51.3.1.14.4 | TableadapterNetworkPortTable | not-accessible | mandatory | Table of Ports of Network Function information. |
| 1.3.6.1.4.1.2.3.51.3.1.14.4.1 | RowadapterNetworkPortEntry | not-accessible | mandatory | Ports of Network Function information entry. |
| 1.3.6.1.4.1.2.3.51.3.1.14.4.1.1 | ColumnportIndex | read-only | mandatory | This column is used to identify a particular network port. |
| 1.3.6.1.4.1.2.3.51.3.1.14.4.1.2 | ColumnnetworkVPDProdName | read-only | mandatory | The Product Name and PFA of the network function for this port and PFA is in HEX. |
| 1.3.6.1.4.1.2.3.51.3.1.14.4.1.3 | ColumnphyPortNo | read-only | mandatory | The Physical Port No. in the network function for this port. |
| 1.3.6.1.4.1.2.3.51.3.1.14.4.1.4 | ColumnphyPortConnector | read-only | mandatory | The Physical Port Connector Layout in the network function for this port. |
| 1.3.6.1.4.1.2.3.51.3.1.14.4.1.5 | ColumnphyPortBurnedinAddress | read-only | mandatory | The Physical Permanent (burned-In) Address of a particular network port. |
| 1.3.6.1.4.1.2.3.51.3.1.14.4.1.6 | ColumnportNo | read-only | mandatory | The Port No. of this network port in the network function. |
| 1.3.6.1.4.1.2.3.51.3.1.14.4.1.7 | ColumnportMaxDataSize | read-only | mandatory | The Port Max Data Size of this network port in the network function. |
| 1.3.6.1.4.1.2.3.51.3.1.14.4.1.8 | ColumnportPermanentAddress | read-only | mandatory | The Permanent Address of a particular network port. |
| 1.3.6.1.4.1.2.3.51.3.1.14.4.1.9 | ColumnportNetworkAddress | read-only | mandatory | The Network Address of a particular network port. |
| 1.3.6.1.4.1.2.3.51.3.1.14.4.1.10 | ColumnportLinkTechnology | read-only | mandatory | The Link Technology of a particular network port. |
| 1.3.6.1.4.1.2.3.51.3.1.14.4.1.11 | ColumnportvNICMode | read-only | mandatory | If the logical port vNIC mode is Virtual Fabric mode, Switch Independent mode, or Unified Fabric Protocol mode, this column returns 1(enabled), otherwise, the … |
| 1.3.6.1.4.1.2.3.51.3.1.14.4.1.12 | ColumnportMaxSpeed | read-only | mandatory | The Maximum Bandwidth in Gbps of a particular network port. |
| 1.3.6.1.4.1.2.3.51.3.1.14.4.1.13 | ColumnportProtocolType | read-only | mandatory | The Protocol Type of a particular network port. |
| 1.3.6.1.4.1.2.3.51.3.1.14.4.1.14 | ColumnportCurrentProtocol | read-only | mandatory | The Current Work Protocol of a particular network port. |
| 1.3.6.1.4.1.2.3.51.3.1.14.4.1.15 | ColumnportFCoEPermanentAddress | read-only | mandatory | The FCoE Permanent Address of a particular network port. |
| 1.3.6.1.4.1.2.3.51.3.1.14.4.1.16 | ColumnportFCoENetworkAddress | read-only | mandatory | The FCoE Network Address of a particular network port. |
| 1.3.6.1.4.1.2.3.51.3.1.14.4.1.17 | ColumnportConnectionType | read-only | mandatory | The Connection Type of a particular network port if its current work protocol is FC or FCoE. |
| 1.3.6.1.4.1.2.3.51.3.1.14.4.1.18 | ColumnportRole | read-only | mandatory | The Port Role of a particular network port if its current work protocol is FC or FCoE. |
| 1.3.6.1.4.1.2.3.51.3.1.14.4.1.19 | ColumnportTargetRelativePortNo | read-only | mandatory | The Target Relative Port No. of a particular network port if its current work protocol is FC or FCoE. |
| 1.3.6.1.4.1.2.3.51.3.1.14.4.1.20 | ColumnphyPortLinkStatus | read-only | mandatory | The Physical Port Link Status in the network function for this port. |
| 1.3.6.1.4.1.2.3.51.3.1.14.4.1.21 | ColumnphyPortLinkSpeed | read-only | mandatory | The Physical Port Link Speed in the network function for this port. |
| 1.3.6.1.4.1.2.3.51.3.1.14.5 | TableadapterGPUFunctionTable | not-accessible | mandatory | Table of GPU Function information. |
| 1.3.6.1.4.1.2.3.51.3.1.14.5.1 | RowadapterGPUFunctionEntry | not-accessible | mandatory | GPU function information entry. |
| 1.3.6.1.4.1.2.3.51.3.1.14.5.1.1 | ColumngpuAdapterIndex | read-only | mandatory | This column is used to identify a particular GPU function. |
| 1.3.6.1.4.1.2.3.51.3.1.14.5.1.4 | ColumngpuVPDManufacturer | read-only | mandatory | The Manufacturer of a particular GPU function. |
| 1.3.6.1.4.1.2.3.51.3.1.14.5.1.5 | ColumngpuVPDUUID | read-only | mandatory | The UUID of a particular GPU function. |
| 1.3.6.1.4.1.2.3.51.3.1.14.5.1.6 | ColumngpuVPDModel | read-only | mandatory | The Model of a particular GPU function. |
| 1.3.6.1.4.1.2.3.51.3.1.14.5.1.7 | ColumngpuVPDSerialNo | read-only | mandatory | The Serial No. of a particular GPU function. |
| 1.3.6.1.4.1.2.3.51.3.1.14.5.1.8 | ColumngpuVPDFRUNo | read-only | mandatory | The FRU No. of a particular GPU function. |
| 1.3.6.1.4.1.2.3.51.3.1.14.5.1.9 | ColumngpuVPDPartNo | read-only | mandatory | The Part No. of a particular GPU function. |
| 1.3.6.1.4.1.2.3.51.3.1.14.5.1.10 | ColumngpuFoDUID | read-only | mandatory | The FoD UID of a particular GPU function. |
| 1.3.6.1.4.1.2.3.51.3.1.14.5.1.11 | ColumngpuSupportHotPlug | read-only | mandatory | Indicates whether the GPU function supports hot plug. |
| 1.3.6.1.4.1.2.3.51.3.1.14.5.1.12 | ColumngpuVideoMemorySize | read-only | mandatory | The Video Memory Size of a particular GPU function. |
| 1.3.6.1.4.1.2.3.51.3.1.14.5.1.13 | ColumngpuVideoMemoryType | read-only | mandatory | The Video Memory Type of a particular GPU function. |
| 1.3.6.1.4.1.2.3.51.3.1.14.5.1.14 | ColumngpuChipNumber | read-only | mandatory | The Chip Number of a particular GPU function. |
| 1.3.6.1.4.1.2.3.51.3.1.14.5.1.15 | ColumngpuMaxDataWidth | read-only | mandatory | The Maximum Data Width in Gbps of a particular GPU funtion. |
| 1.3.6.1.4.1.2.3.51.3.1.14.5.1.16 | ColumngpuPackageType | read-only | mandatory | The Package Type of a particular GPU function. |
| 1.3.6.1.4.1.2.3.51.3.1.14.5.1.17 | ColumngpuPCIBusNo | read-only | mandatory | The PCI Bus No. of a particular GPU function. |
| 1.3.6.1.4.1.2.3.51.3.1.14.5.1.18 | ColumngpuPCIDevNo | read-only | mandatory | The PCI Device No. of a particular GPU function. |
| 1.3.6.1.4.1.2.3.51.3.1.14.5.1.19 | ColumngpuPCIFuncNo | read-only | mandatory | The PCI Function No. of a particular GPU function. |
| 1.3.6.1.4.1.2.3.51.3.1.14.5.1.20 | ColumngpuPCIVendorId | read-only | mandatory | The PCI Vendor ID of a particular GPU function. |
| 1.3.6.1.4.1.2.3.51.3.1.14.5.1.21 | ColumngpuPCIDevId | read-only | mandatory | The PCI Device ID of a particular GPU function. |
| 1.3.6.1.4.1.2.3.51.3.1.14.5.1.22 | ColumngpuPCIDevType | read-only | mandatory | The PCI Device Type of a particular GPU function. |
| 1.3.6.1.4.1.2.3.51.3.1.14.5.1.23 | ColumngpuPCIRevId | read-only | mandatory | The PCI Revision ID of a particular GPU function. |
| 1.3.6.1.4.1.2.3.51.3.1.14.5.1.24 | ColumngpuPCISubVendorId | read-only | mandatory | The PCI Subsystem Vendor ID of a particular GPU function. |
| 1.3.6.1.4.1.2.3.51.3.1.14.5.1.25 | ColumngpuPCISubDevId | read-only | mandatory | The PCI Subsystem Device ID of a particular GPU function. |
| 1.3.6.1.4.1.2.3.51.3.1.14.5.1.26 | ColumngpuPCISlotDesignation | read-only | mandatory | The PCI Slot Designation of a particular GPU function. |
| 1.3.6.1.4.1.2.3.51.3.1.14.6 | TableadapterGPUChipTable | not-accessible | mandatory | Table of Chips of GPU Function information. |
| 1.3.6.1.4.1.2.3.51.3.1.14.6.1 | RowadapterGPUChipEntry | not-accessible | mandatory | GPU function chip information entry. |
| 1.3.6.1.4.1.2.3.51.3.1.14.6.1.1 | ColumnchipIndex | read-only | mandatory | This column is used to identify a particular GPU chip |
| 1.3.6.1.4.1.2.3.51.3.1.14.6.1.2 | ColumngpuVPDProdName | read-only | mandatory | The Product Name and PFA of the GPU function for this chip and PFA is in HEX. |
| 1.3.6.1.4.1.2.3.51.3.1.14.6.1.3 | ColumnchipNo | read-only | mandatory | The Index of the GPU chip in the GPU adapter. |
| 1.3.6.1.4.1.2.3.51.3.1.14.6.1.4 | ColumnchipName | read-only | mandatory | The Name of a particular GPU chip. |
| 1.3.6.1.4.1.2.3.51.3.1.14.6.1.5 | ColumnchipFamily | read-only | mandatory | The Family Name of a particular GPU chip. |
| 1.3.6.1.4.1.2.3.51.3.1.14.6.1.6 | ColumnchipManufacturer | read-only | mandatory | The Manufacturer of a particular GPU chip. |
| 1.3.6.1.4.1.2.3.51.3.1.14.6.1.7 | ColumnchipCoresEnabled | read-only | mandatory | Indicates whether enable cores of a particular GPU chip. |
| 1.3.6.1.4.1.2.3.51.3.1.14.6.1.8 | ColumnchipMaxClockSpeed | read-only | mandatory | The Maximum Clock Speed in MHz of a particular GPU chip. |
| 1.3.6.1.4.1.2.3.51.3.1.14.6.1.9 | ColumnchipExtBusClockSpeed | read-only | mandatory | The External Bus Clock Speed in MHz of a particular GPU chip. |
| 1.3.6.1.4.1.2.3.51.3.1.14.6.1.10 | ColumnchipAddressWidth | read-only | mandatory | The Address Width of a particular GPU chip. |
| 1.3.6.1.4.1.2.3.51.3.1.14.6.1.11 | ColumnchipDataWidth | read-only | mandatory | The Data Width of a particular GPU chip. |
| 1.3.6.1.4.1.2.3.51.3.1.14.6.1.12 | ColumnchipFormFactor | read-only | mandatory | The Form Factor of a particular GPU chip. |
| 1.3.6.1.4.1.2.3.51.3.1.14.6.1.13 | ColumnchipModel | read-only | mandatory | The Model of a particular GPU chip. |
| 1.3.6.1.4.1.2.3.51.3.1.14.6.1.14 | ColumnchipSerialNo | read-only | mandatory | The Serial No. of a particular GPU chip. |
| 1.3.6.1.4.1.2.3.51.3.1.14.6.1.15 | ColumnchipFRUNo | read-only | mandatory | The FRU No. of a particular GPU chip. |
| 1.3.6.1.4.1.2.3.51.3.1.14.6.1.16 | ColumnchipPartNo | read-only | mandatory | The Part No. of a particular GPU chip. |
| 1.3.6.1.4.1.2.3.51.3.1.14.6.1.17 | ColumnchipUniqueID | read-only | mandatory | The Unique ID of a particular GPU chip. |
| 1.3.6.1.4.1.2.3.51.3.1.14.7 | TableadapterRAIDFunctionTable | not-accessible | mandatory | Table of RAID Function information. |
| 1.3.6.1.4.1.2.3.51.3.1.14.7.1 | RowadapterRAIDFunctionEntry | not-accessible | mandatory | RAID function information entry. |
| 1.3.6.1.4.1.2.3.51.3.1.14.7.1.1 | ColumnraidAdapterIndex | read-only | mandatory | This column is used to identify a particular RAID function. |
| 1.3.6.1.4.1.2.3.51.3.1.14.7.1.2 | ColumnraidVPDProdName | read-only | mandatory | The Product Name and PFA of a particular RAID function and PFA is in HEX. |
| 1.3.6.1.4.1.2.3.51.3.1.14.7.1.3 | ColumnadapterVPDProdName | read-only | mandatory | The Product Name of a particular adapter providing this function. And if the Product Name contains PFA, PFA is in HEX. |
| 1.3.6.1.4.1.2.3.51.3.1.14.7.1.4 | ColumnraidVPDManufacturer | read-only | mandatory | The Manufacturer of a particular RAID function. |
| 1.3.6.1.4.1.2.3.51.3.1.14.7.1.5 | ColumnraidVPDUUID | read-only | mandatory | The UUID of a particular RAID function. |
| 1.3.6.1.4.1.2.3.51.3.1.14.7.1.6 | ColumnraidVPDModel | read-only | mandatory | The Model of a particular RAID function. |
| 1.3.6.1.4.1.2.3.51.3.1.14.7.1.7 | ColumnraidVPDSerialNo | read-only | mandatory | The Serial No. of a particular RAID function. |
| 1.3.6.1.4.1.2.3.51.3.1.14.7.1.8 | ColumnraidVPDFRUNo | read-only | mandatory | The FRU No. of a particular RAID function. |
| 1.3.6.1.4.1.2.3.51.3.1.14.7.1.9 | ColumnraidVPDPartNo | read-only | mandatory | The Part No. of a particular RAID function. |
| 1.3.6.1.4.1.2.3.51.3.1.14.7.1.10 | ColumnraidFoDUID | read-only | mandatory | The FoD UID of a particular RAID function. |
| 1.3.6.1.4.1.2.3.51.3.1.14.7.1.11 | ColumnraidSupportHotPlug | read-only | mandatory | Indicates whether the RAID function supports hot plug. |
| 1.3.6.1.4.1.2.3.51.3.1.14.7.1.12 | ColumnraidMaxDataWidth | read-only | mandatory | The Maximum Data Width in Gbps of a particular RAID funtion. |
| 1.3.6.1.4.1.2.3.51.3.1.14.7.1.13 | ColumnraidPackageType | read-only | mandatory | The Package Type of a particular RAID function. |
| 1.3.6.1.4.1.2.3.51.3.1.14.7.1.14 | ColumnraidPCIBusNo | read-only | mandatory | The PCI Bus No. of a particular RAID function. |
| 1.3.6.1.4.1.2.3.51.3.1.14.7.1.15 | ColumnraidPCIDevNo | read-only | mandatory | The PCI Device No. of a particular RAID function. |
| 1.3.6.1.4.1.2.3.51.3.1.14.7.1.16 | ColumnraidPCIFuncNo | read-only | mandatory | The PCI Function No. of a particular RAID function. |
| 1.3.6.1.4.1.2.3.51.3.1.14.7.1.17 | ColumnraidPCIVendorId | read-only | mandatory | The PCI Vendor ID of a particular RAID function. |
| 1.3.6.1.4.1.2.3.51.3.1.14.7.1.18 | ColumnraidPCIDevId | read-only | mandatory | The PCI Device ID of a particular RAID function. |
| 1.3.6.1.4.1.2.3.51.3.1.14.7.1.19 | ColumnraidPCIDevType | read-only | mandatory | The PCI Device Type of a particular RAID function. |
| 1.3.6.1.4.1.2.3.51.3.1.14.7.1.20 | ColumnraidPCIRevId | read-only | mandatory | The PCI Revision ID of a particular RAID function. |
| 1.3.6.1.4.1.2.3.51.3.1.14.7.1.21 | ColumnraidPCISubVendorId | read-only | mandatory | The PCI Subsystem Vendor ID of a particular RAID function. |
| 1.3.6.1.4.1.2.3.51.3.1.14.7.1.22 | ColumnraidPCISubDevId | read-only | mandatory | The PCI Subsystem Device ID of a particular RAID function. |
| 1.3.6.1.4.1.2.3.51.3.1.14.7.1.23 | ColumnraidPCISlotDesignation | read-only | mandatory | The PCI Slot Designation of a particular RAID function. |
| 1.3.6.1.4.1.2.3.51.3.1.14.8 | TableadapterFirmwareTable | not-accessible | mandatory | Table of PCI Function Firmware information. |
| 1.3.6.1.4.1.2.3.51.3.1.14.8.1 | RowadapterFirmwareEntry | not-accessible | mandatory | Adapter Firmware Entry. |
| 1.3.6.1.4.1.2.3.51.3.1.14.8.1.1 | ColumnadapterFwIndex | read-only | mandatory | This column is used to identify a particular function firmware. |
| 1.3.6.1.4.1.2.3.51.3.1.14.8.1.2 | ColumnfunctionVPDProdName | read-only | mandatory | The Product Name and PFA of a particular function for this firmware and PFA is in HEX. |
| 1.3.6.1.4.1.2.3.51.3.1.14.8.1.3 | ColumnadapterFwName | read-only | mandatory | The name of a particular PCI function firmware. |
| 1.3.6.1.4.1.2.3.51.3.1.14.8.1.4 | ColumnadapterFwClassification | read-only | mandatory | The classification of a particular PCI function firmware. |
| 1.3.6.1.4.1.2.3.51.3.1.14.8.1.5 | ColumnadapterFwDescription | read-only | mandatory | The description of a particular PCI function firmware. |
| 1.3.6.1.4.1.2.3.51.3.1.14.8.1.6 | ColumnadapterFwManufacture | read-only | mandatory | The manufacturer of a particular PCI function firmware. |
| 1.3.6.1.4.1.2.3.51.3.1.14.8.1.7 | ColumnadapterFwVersion | read-only | mandatory | The version of a particular PCI function firmware. |
| 1.3.6.1.4.1.2.3.51.3.1.14.8.1.8 | ColumnadapterFwReleaseDate | read-only | mandatory | The release date of a particular PCI function firmware. |
| 1.3.6.1.4.1.2.3.51.3.1.14.8.1.9 | ColumnadapterFwSoftwareID | read-only | mandatory | The Software ID of a particular PCI function firmware. |
| 1.3.6.1.4.1.2.3.51.3.2 | NodeerrorLogs | |||
| 1.3.6.1.4.1.2.3.51.3.2.1 | NodeeventLog | |||
| 1.3.6.1.4.1.2.3.51.3.2.1.1 | TableeventLogTable | not-accessible | mandatory | Table of event logs. View as a table and not as individual entries for consistent results. |
| 1.3.6.1.4.1.2.3.51.3.2.1.1.1 | RoweventLogEntry | not-accessible | mandatory | Event log entries. View as a table and not as individual entries for consistent results. |
| 1.3.6.1.4.1.2.3.51.3.2.1.1.1.1 | ColumneventLogIndex | read-only | mandatory | Event log index number. View as a table and not as individual entries for consistent results. |
| 1.3.6.1.4.1.2.3.51.3.2.1.1.1.2 | ColumneventLogString | read-only | mandatory | Contains a string of information to detail the event. View as a table and not as individual entries for consistent results. |
| 1.3.6.1.4.1.2.3.51.3.2.1.1.1.3 | ColumneventLogSeverity | read-only | mandatory | Contains a information to detail the severity of the event. View as a table and not as individual entries for consistent results. |
| 1.3.6.1.4.1.2.3.51.3.2.1.1.1.4 | ColumneventLogDate | read-only | mandatory | The Date of the Event occured. View as a table and not as individual entries for consistent results. |
| 1.3.6.1.4.1.2.3.51.3.2.1.1.1.5 | ColumneventLogTime | read-only | mandatory | The Time of the Event occured. View as a table and not as individual entries for consistent results. |
| 1.3.6.1.4.1.2.3.51.3.2.1.3 | ScalareventLogClr | write-only | mandatory | Clear the event log. |
| 1.3.6.1.4.1.2.3.51.3.2.1.4 | ScalareventLogTftpServer | read-write | mandatory | To save the eventLog if it is not empty, set the IP address or host name of the TFTP server where the file should be transferred. The address must be entered i… |
| 1.3.6.1.4.1.2.3.51.3.2.1.5 | ScalareventLogFileName | read-write | mandatory | File name of the saved log file on the target system. |
| 1.3.6.1.4.1.2.3.51.3.2.1.6 | ScalareventLogSaveStart | read-write | mandatory | Start saving the eventLog file to the specified target file and system. Using execute will cause the SNMP client to wait for the save operation to complete. Us… |
| 1.3.6.1.4.1.2.3.51.3.2.1.7 | ScalareventLogSaveStatus | read-only | mandatory | Get the status of the last save operation which was initiated through SNMP method. |
| 1.3.6.1.4.1.2.3.51.3.3 | NodeconfigureSP | |||
| 1.3.6.1.4.1.2.3.51.3.3.1 | NoderemoteAccessConfig | |||
| 1.3.6.1.4.1.2.3.51.3.3.1.1 | NodegeneralRemoteCfg | |||
| 1.3.6.1.4.1.2.3.51.3.3.1.1.1 | ScalarremoteAlertRetryDelay | read-write | mandatory | Number in seconds to delay between retries if sending a remote alert is unsuccessful. |
| 1.3.6.1.4.1.2.3.51.3.3.1.1.2 | ScalarremoteAlertRetryCount | read-write | mandatory | Number of additional times a remote alert will be retried if not succesfully sent. A value of zero indicates no retries will be attempted. |
| 1.3.6.1.4.1.2.3.51.3.3.1.1.3 | ScalarremoteAlertEntryDelay | read-write | mandatory | Number in seconds to delay between entries if sending a remote alert is unsuccessful. |
| 1.3.6.1.4.1.2.3.51.3.3.1.1.4 | ScalarsnmpCriticalAlerts | read-write | mandatory | If Enabled,criticalAlerts will be sent to SNMP, else critical alerts will not be sent. |
| 1.3.6.1.4.1.2.3.51.3.3.1.1.5 | ScalarsnmpWarningAlerts | read-write | mandatory | If Enabled,warningAlerts will be sent to SNMP , else warning alerts will not be sent. |
| 1.3.6.1.4.1.2.3.51.3.3.1.1.6 | ScalarsnmpSystemAlerts | read-write | mandatory | If Enabled,systemAlerts will be sent to SNMP , else system alerts will not be sent. |
| 1.3.6.1.4.1.2.3.51.3.3.1.1.7 | ScalarremoteAccessTamperDelay | read-write | mandatory | Number in minutes to prohibit a remote login attempt after more than 5 sequential login attempts have failed. |
| 1.3.6.1.4.1.2.3.51.3.3.1.1.8 | ScalaruserAuthenticationMethod | read-write | mandatory | Use this field to specify how users attempting to login should be authenticated. There are two methods: Local authentication. Userid and password are verified … |
| 1.3.6.1.4.1.2.3.51.3.3.1.1.9 | ScalarwebInactivityTimeout | read-write | mandatory | Use this field to indicate how long, in minutes, the IMM subsystem will wait before disconnecting an inactive web session. Select the no timeout option to disa… |
| 1.3.6.1.4.1.2.3.51.3.3.1.1.10 | NodesnmpAlertFilters | |||
| 1.3.6.1.4.1.2.3.51.3.3.1.1.10.2 | ScalarsafSpTrapTempC | read-write | mandatory | Critical Alert: Temperature threshold exceeded. |
| 1.3.6.1.4.1.2.3.51.3.3.1.1.10.3 | ScalarsafSpTrapVoltC | read-write | mandatory | Critical Alert: Voltage threshold exceeded. |
| 1.3.6.1.4.1.2.3.51.3.3.1.1.10.4 | ScalarsafSpTrapPowerC | read-write | mandatory | Critical Alert: Power failure. |
| 1.3.6.1.4.1.2.3.51.3.3.1.1.10.5 | ScalarsafSpTrapHdC | read-write | mandatory | Critical Alert: Hard disk drive failure. |
| 1.3.6.1.4.1.2.3.51.3.3.1.1.10.6 | ScalarsafSpTrapFanC | read-write | mandatory | Critical Alert: Single Fan failure. |
| 1.3.6.1.4.1.2.3.51.3.3.1.1.10.7 | ScalarsafSpTrapIhcC | read-write | mandatory | Critical Alert: Incompatible hardware configuration. |
| 1.3.6.1.4.1.2.3.51.3.3.1.1.10.8 | ScalarsafSpTrapCPUC | read-write | mandatory | Critical Alert: CPU Error. |
| 1.3.6.1.4.1.2.3.51.3.3.1.1.10.9 | ScalarsafSpTrapMemoryC | read-write | mandatory | Critical Alert: Memory Error. |
| 1.3.6.1.4.1.2.3.51.3.3.1.1.10.10 | ScalarsafSpTrapRdpsC | read-write | mandatory | Critical Alert: Redundant Power Supply failure. |
| 1.3.6.1.4.1.2.3.51.3.3.1.1.10.11 | ScalarsafSpTrapHardwareC | read-write | mandatory | Critical Alert: Other Failure - refer to Message ID for specific condition. |
| 1.3.6.1.4.1.2.3.51.3.3.1.1.10.12 | ScalarsafSpTrapRdpsN | read-write | mandatory | Non-Critical Alert: Redundant Power Supply failure. |
| 1.3.6.1.4.1.2.3.51.3.3.1.1.10.13 | ScalarsafSpTrapTempN | read-write | mandatory | Non-Critical Alert: Temperature threshold exceeded. |
| 1.3.6.1.4.1.2.3.51.3.3.1.1.10.14 | ScalarsafSpTrapVoltN | read-write | mandatory | Non-Critical Alert: Voltage threshold exceeded. |
| 1.3.6.1.4.1.2.3.51.3.3.1.1.10.15 | ScalarsafSpTrapPowerN | read-write | mandatory | Non-Critical Alert: Power. |
| 1.3.6.1.4.1.2.3.51.3.3.1.1.10.16 | ScalarsafSpTrapFanN | read-write | mandatory | Non-Critical Alert: Fan Error. |
| 1.3.6.1.4.1.2.3.51.3.3.1.1.10.17 | ScalarsafSpTrapCPUN | read-write | mandatory | Non-Critical Alert: Memory Error. |
| 1.3.6.1.4.1.2.3.51.3.3.1.1.10.18 | ScalarsafSpTrapMemoryN | read-write | mandatory | Non-Critical Alert: Memory Error. |
| 1.3.6.1.4.1.2.3.51.3.3.1.1.10.19 | ScalarsafSpTrapHardwareN | read-write | mandatory | Non-Critical Alert: Warning - refer to Message ID for specific condition. |
| 1.3.6.1.4.1.2.3.51.3.3.1.1.10.20 | ScalarsafSpTrapRLogin | read-write | mandatory | Sev-Off Alert: Event Remote Login. |
| 1.3.6.1.4.1.2.3.51.3.3.1.1.10.21 | ScalarsafSpTrapOsToS | read-write | mandatory | System Alert: OS Timeout value exceeded. |
| 1.3.6.1.4.1.2.3.51.3.3.1.1.10.22 | ScalarsafSpTrapAppS | read-write | mandatory | System Alert: Application Alert. Refer to Message ID for specific condition. |
| 1.3.6.1.4.1.2.3.51.3.3.1.1.10.23 | ScalarsafSpTrapPowerS | read-write | mandatory | System Alert: Power on or off. |
| 1.3.6.1.4.1.2.3.51.3.3.1.1.10.24 | ScalarsafSpTrapBootS | read-write | mandatory | System Alert: System Boot Failure. |
| 1.3.6.1.4.1.2.3.51.3.3.1.1.10.25 | ScalarsafSpTrapLdrToS | read-write | mandatory | System Alert: OS Loader Timeout. |
| 1.3.6.1.4.1.2.3.51.3.3.1.1.10.26 | ScalarsafSpTrapPFAS | read-write | mandatory | System Alert: Predictive Failure Analysis(PFA) information. |
| 1.3.6.1.4.1.2.3.51.3.3.1.1.10.27 | ScalarsafSpTrapSysLogS | read-write | mandatory | System Alert: System Log 75% full. |
| 1.3.6.1.4.1.2.3.51.3.3.1.1.10.28 | ScalarsafSpTrapNwChangeS | read-write | mandatory | System Alert: Network change notification. |
| 1.3.6.1.4.1.2.3.51.3.3.1.1.20 | NodecustomSecuritySettings | |||
| 1.3.6.1.4.1.2.3.51.3.3.1.1.20.1 | ScalarloginPasswordRequired | read-write | mandatory | If enabled, all users require a login password to access the IMM via the CLI and Web interfaces. The default value is disabled. |
| 1.3.6.1.4.1.2.3.51.3.3.1.1.20.2 | ScalarpasswordExpirationPeriod | read-write | mandatory | The number of days before login passwords expire. The minimum value is 1 day and the maximum value is 365 days. The default value is 90 days. A value of 0 disa… |
| 1.3.6.1.4.1.2.3.51.3.3.1.1.20.3 | ScalarminimumPasswordReuseCycle | read-write | mandatory | The number of unique passwords a user must choose before reusing a password. The default value is none. |
| 1.3.6.1.4.1.2.3.51.3.3.1.1.20.4 | ScalarcomplexPasswordRulesEnforced | read-write | mandatory | If enabled, password should contains at least one numeric and one alphabetic character. |
| 1.3.6.1.4.1.2.3.51.3.3.1.1.20.5 | ScalarminimumPasswordLength | read-write | mandatory | The required minimum number of characters in the new password. The default value is 8. A SET of this object is ignored until the complexPasswordRules option is… |
| 1.3.6.1.4.1.2.3.51.3.3.1.1.20.6 | ScalardefaultAdminPasswordExpired | read-write | mandatory | If enabled, the factory default 'USERID' account password must be changed on next login. The default value is disabled. |
| 1.3.6.1.4.1.2.3.51.3.3.1.1.20.7 | ScalarminimumDiffCharsPassword | read-write | mandatory | The required minimum number of characters in the new password different from the previous password. The default value is 2. A SET of this object is ignored unt… |
| 1.3.6.1.4.1.2.3.51.3.3.1.1.20.8 | ScalarchangePasswordFirstAccess | read-write | mandatory | If enabled, the login user will be forced to change their password on the first access after the account has been established or on the first access after an a… |
| 1.3.6.1.4.1.2.3.51.3.3.1.1.20.9 | ScalaraccountLockoutPeriod | read-write | mandatory | The period of time in minutes that a user is locked out after the maximum number of login failures was reached. The minimum value is is 1 minute and the maximu… |
| 1.3.6.1.4.1.2.3.51.3.3.1.1.20.10 | ScalarmaxLoginFailures | read-write | mandatory | The maximum number of login failures before a user account is locked. A value of 0 disables this option. The default value is 5. |
| 1.3.6.1.4.1.2.3.51.3.3.1.1.20.11 | ScalarpasswordChangeInterval | read-write | mandatory | A minimum period of time that user is not able to change their own password. The range of acceptable values will be from 0 to 240 (or 10 days). A value of 0 di… |
| 1.3.6.1.4.1.2.3.51.3.3.1.2 | NodeserialPortCfg | |||
| 1.3.6.1.4.1.2.3.51.3.3.1.2.1 | ScalarportBaud | read-write | mandatory | Baud rate for the serial port. |
| 1.3.6.1.4.1.2.3.51.3.3.1.2.2 | ScalarportParity | read-write | mandatory | Parity setting for the serial port. |
| 1.3.6.1.4.1.2.3.51.3.3.1.2.3 | NodeserialRedirect | |||
| 1.3.6.1.4.1.2.3.51.3.3.1.2.3.1 | ScalarenterCLIkeySeq | read-write | mandatory | This is the keystroke sequence used to enter the CLI. This sequence must have at least one character. The caret symbol (^) has a special meaning in this sequen… |
| 1.3.6.1.4.1.2.3.51.3.3.1.2.4 | ScalarportStopBits | read-write | mandatory | Number of stop bits for the serial port. |
| 1.3.6.1.4.1.2.3.51.3.3.1.2.18 | ScalarportCLImode | read-write | mandatory | Use this field to select the CLI (command line interface) mode for this port. The CLI mode disablies serial redirect, or pecifies the type of keystroke sequenc… |
| 1.3.6.1.4.1.2.3.51.3.3.1.3 | NoderemoteAlertIds | |||
| 1.3.6.1.4.1.2.3.51.3.3.1.3.1 | TableremoteAlertIdsTable | not-accessible | mandatory | Table of remote alert entries. This table lets you configure remote alert recipients. You can define up to 12 unique recipients. |
| 1.3.6.1.4.1.2.3.51.3.3.1.3.1.1 | RowremoteAlertIdsEntry | not-accessible | mandatory | Remote alert entries. |
| 1.3.6.1.4.1.2.3.51.3.3.1.3.1.1.1 | ColumnremoteAlertIdEntryIndex | read-only | mandatory | Index for remote alert entry. |
| 1.3.6.1.4.1.2.3.51.3.3.1.3.1.1.2 | ColumnremoteAlertIdEntryStatus | read-write | mandatory | If enabled alerts will be sent to this alert recipient else alerts will not be sent. |
| 1.3.6.1.4.1.2.3.51.3.3.1.3.1.1.3 | ColumnremoteAlertIdEntryName | read-write | mandatory | A null terminated string that contains a text description of this entry. |
| 1.3.6.1.4.1.2.3.51.3.3.1.3.1.1.4 | ColumnremoteAlertIdEmailAddr | read-write | mandatory | A null terminated string that contains a E-Mail Address. For example 'jeb@us.lenovo.com'. Used only for a E-mail over Lan. |
| 1.3.6.1.4.1.2.3.51.3.3.1.3.1.1.5 | ColumnremoteAlertIdEntryCriticalAlert | read-write | mandatory | If Enabled,criticalAlerts will be sent to this remote alert receipient,else critical alerts will not be sent. |
| 1.3.6.1.4.1.2.3.51.3.3.1.3.1.1.6 | ColumnremoteAlertIdEntryWarningAlert | read-write | mandatory | If Enabled,warningAlerts will be sent to this remote alert receipient,else warningAlerts will not be sent. |
| 1.3.6.1.4.1.2.3.51.3.3.1.3.1.1.7 | ColumnremoteAlertIdEntrySystemAlert | read-write | mandatory | If Enabled,systemAlerts will be sent to this remote alert receipient,else systemAlerts will not be sent. |
| 1.3.6.1.4.1.2.3.51.3.3.1.3.1.1.8 | ColumnremoteAlertIdEntryAuditAlert | read-write | mandatory | If Enabled,systemAlerts will be sent to this remote alert receipient,else systemAlerts will not be sent. |
| 1.3.6.1.4.1.2.3.51.3.3.1.3.1.1.9 | ColumnremoteAlertIdEntryAttachmentsToEmailAlerts | read-write | mandatory | Indicates if the event log should be attached to a email alert. |
| 1.3.6.1.4.1.2.3.51.3.3.1.3.1.1.10 | ColumnremoteAlertIdEntrySyslogPortAssignment | read-write | mandatory | Syslog port number. |
| 1.3.6.1.4.1.2.3.51.3.3.1.3.1.1.11 | ColumnremoteAlertIdEntrySyslogHostname | read-write | mandatory | Syslog hostname or IP address. |
| 1.3.6.1.4.1.2.3.51.3.3.1.3.1.1.12 | ColumnremoteAlertIdEntryType | read-write | mandatory | Alert recipient type. |
| 1.3.6.1.4.1.2.3.51.3.3.1.3.2 | TableremoteAlertFiltersTable | not-accessible | mandatory | Table of Alert Filters. The entries (rows) in this table correspond 1-1 with the entries in the remoteAlertIdsTable. They are correlated by index. |
| 1.3.6.1.4.1.2.3.51.3.3.1.3.2.1 | RowremoteAlertFiltersEntry | not-accessible | mandatory | Remote Filters entries. |
| 1.3.6.1.4.1.2.3.51.3.3.1.3.2.1.1 | ColumnrafIndex | read-only | mandatory | Index for User Authority Level entry. |
| 1.3.6.1.4.1.2.3.51.3.3.1.3.2.1.2 | ColumnrafSpTrapTempC | read-write | mandatory | Critical Alert: Temperature threshold exceeded. |
| 1.3.6.1.4.1.2.3.51.3.3.1.3.2.1.3 | ColumnrafSpTrapVoltC | read-write | mandatory | Critical Alert: Voltage threshold exceeded. |
| 1.3.6.1.4.1.2.3.51.3.3.1.3.2.1.4 | ColumnrafSpTrapPowerC | read-write | mandatory | Critical Alert: Power failure. |
| 1.3.6.1.4.1.2.3.51.3.3.1.3.2.1.5 | ColumnrafSpTrapHdC | read-write | mandatory | Critical Alert: Hard disk drive failure. |
| 1.3.6.1.4.1.2.3.51.3.3.1.3.2.1.6 | ColumnrafSpTrapFanC | read-write | mandatory | Critical Alert: Single Fan failure. |
| 1.3.6.1.4.1.2.3.51.3.3.1.3.2.1.7 | ColumnrafSpTrapIhcC | read-write | mandatory | Critical Alert: Incompatible hardware configuration. |
| 1.3.6.1.4.1.2.3.51.3.3.1.3.2.1.8 | ColumnrafSpTrapCPUC | read-write | mandatory | Critical Alert: CPU Error. |
| 1.3.6.1.4.1.2.3.51.3.3.1.3.2.1.9 | ColumnrafSpTrapMemoryC | read-write | mandatory | Critical Alert: Memory Error. |
| 1.3.6.1.4.1.2.3.51.3.3.1.3.2.1.10 | ColumnrafSpTrapRdpsC | read-write | mandatory | Critical Alert: Redundant Power Supply failure. |
| 1.3.6.1.4.1.2.3.51.3.3.1.3.2.1.11 | ColumnrafSpTrapHardwareC | read-write | mandatory | Critical Alert: Other Failure - refer to Message ID for specific condition. |
| 1.3.6.1.4.1.2.3.51.3.3.1.3.2.1.12 | ColumnrafSpTrapRdpsN | read-write | mandatory | Non-Critical Alert: Redundant Power Supply failure. |
| 1.3.6.1.4.1.2.3.51.3.3.1.3.2.1.13 | ColumnrafSpTrapTempN | read-write | mandatory | Non-Critical Alert: Temperature threshold exceeded. |
| 1.3.6.1.4.1.2.3.51.3.3.1.3.2.1.14 | ColumnrafSpTrapVoltN | read-write | mandatory | Non-Critical Alert: Voltage threshold exceeded. |
| 1.3.6.1.4.1.2.3.51.3.3.1.3.2.1.15 | ColumnrafSpTrapPowerN | read-write | mandatory | Non-Critical Alert: Power. |
| 1.3.6.1.4.1.2.3.51.3.3.1.3.2.1.16 | ColumnrafSpTrapFanN | read-write | mandatory | Non-Critical Alert: Fan Error. |
| 1.3.6.1.4.1.2.3.51.3.3.1.3.2.1.17 | ColumnrafSpTrapCPUN | read-write | mandatory | Non-Critical Alert: Memory Error. |
| 1.3.6.1.4.1.2.3.51.3.3.1.3.2.1.18 | ColumnrafSpTrapMemoryN | read-write | mandatory | Non-Critical Alert: Memory Error. |
| 1.3.6.1.4.1.2.3.51.3.3.1.3.2.1.19 | ColumnrafSpTrapHardwareN | read-write | mandatory | Non-Critical Alert: Warning - refer to Message ID for specific condition. |
| 1.3.6.1.4.1.2.3.51.3.3.1.3.2.1.20 | ColumnrafSpTrapRLogin | read-write | mandatory | Sev-Off Alert: Event Remote Login. |
| 1.3.6.1.4.1.2.3.51.3.3.1.3.2.1.21 | ColumnrafSpTrapOsToS | read-write | mandatory | System Alert: OS Timeout value exceeded. |
| 1.3.6.1.4.1.2.3.51.3.3.1.3.2.1.22 | ColumnrafSpTrapAppS | read-write | mandatory | System Alert: Application Alert. Refer to Message ID for specific condition. |
| 1.3.6.1.4.1.2.3.51.3.3.1.3.2.1.23 | ColumnrafSpTrapPowerS | read-write | mandatory | System Alert: Power On or Off. |
| 1.3.6.1.4.1.2.3.51.3.3.1.3.2.1.24 | ColumnrafSpTrapBootS | read-write | mandatory | System Alert: System Boot Failure. |
| 1.3.6.1.4.1.2.3.51.3.3.1.3.2.1.25 | ColumnrafSpTrapLdrToS | read-write | mandatory | System Alert: OS Loader Timeout. |
| 1.3.6.1.4.1.2.3.51.3.3.1.3.2.1.26 | ColumnrafSpTrapPFAS | read-write | mandatory | System Alert: Predictive Failure Analysis(PFA) information. |
| 1.3.6.1.4.1.2.3.51.3.3.1.3.2.1.27 | ColumnrafSpTrapSysLogS | read-write | mandatory | System Alert: System Log 75% full. |
| 1.3.6.1.4.1.2.3.51.3.3.1.3.2.1.28 | ColumnrafSpTrapNwChangeS | read-write | mandatory | System Alert: Network change notification. |
| 1.3.6.1.4.1.2.3.51.3.3.1.3.2.1.29 | ColumnrafSpTrapAllAuditS | read-write | mandatory | System Alert: All Audit Events notification. |
| 1.3.6.1.4.1.2.3.51.3.3.1.3.30 | ScalargenerateTestAlert | write-only | mandatory | Generate a Test Alert. This will send a test alert to all configured and enabled remote alert receipients. The text portion of the alert will contain 'Applicat… |
| 1.3.6.1.4.1.2.3.51.3.3.1.4 | NoderemoteAccessIds | |||
| 1.3.6.1.4.1.2.3.51.3.3.1.4.1 | TableremoteAccessIdsTable | not-accessible | mandatory | Table of remote access profiles. This table lets you to configure all login profiles. You can define up to 12 unique profiles. Note: By default, the remote sup… |
| 1.3.6.1.4.1.2.3.51.3.3.1.4.1.1 | RowremoteAccessIdsEntry | not-accessible | mandatory | Remote access entries. |
| 1.3.6.1.4.1.2.3.51.3.3.1.4.1.1.1 | ColumnremoteAccessIdEntryIndex | read-only | mandatory | Index for Remote access entry. |
| 1.3.6.1.4.1.2.3.51.3.3.1.4.1.1.2 | ColumnremoteAccessIdEntryUserId | read-write | mandatory | Remote access entry null terminated string that contains the user-id. This can only be modified from blank to non-blank, then back to blank. |
| 1.3.6.1.4.1.2.3.51.3.3.1.4.1.1.3 | ColumnremoteAccessIdEntryPassword | read-write | mandatory | Remote access entry null terminated string that contains the password. On a read a NULL string will be returned for security reasons. |
| 1.3.6.1.4.1.2.3.51.3.3.1.4.1.1.4 | ColumnremoteAccessIdEntryUserPwdLeftDays | read-only | mandatory | left days before password expired for selected user |
| 1.3.6.1.4.1.2.3.51.3.3.1.4.2 | TableremoteAccessUserAuthorityLevelTable | not-accessible | mandatory | Table of user authority level profiles. |
| 1.3.6.1.4.1.2.3.51.3.3.1.4.2.1 | RowremoteAccessUserAuthorityLevelEntry | not-accessible | mandatory | User authority level entries. |
| 1.3.6.1.4.1.2.3.51.3.3.1.4.2.1.1 | ColumnualIndex | read-only | mandatory | Index for User Authority Level entry. |
| 1.3.6.1.4.1.2.3.51.3.3.1.4.2.1.2 | ColumnualId | read-only | mandatory | User ID |
| 1.3.6.1.4.1.2.3.51.3.3.1.4.2.1.3 | ColumnualSupervisor | read-write | mandatory | User has no restrictions. |
| 1.3.6.1.4.1.2.3.51.3.3.1.4.2.1.4 | ColumnualReadOnly | read-write | mandatory | User has only read-only access, and cannot perform any save, modify, clear, or state affecting operations (eg. restart IMM, restore defaults, upgrade the firmw… |
| 1.3.6.1.4.1.2.3.51.3.3.1.4.2.1.5 | ColumnualAccountManagement | read-write | mandatory | User can add/modify/delete users and change the global login settings in the Login Profiles panel. |
| 1.3.6.1.4.1.2.3.51.3.3.1.4.2.1.6 | ColumnualConsoleAccess | read-write | mandatory | User can access the remote console. |
| 1.3.6.1.4.1.2.3.51.3.3.1.4.2.1.7 | ColumnualConsoleAndVirtualMediaAccess | read-write | mandatory | User can access both the remote console and the virtual media feature. |
| 1.3.6.1.4.1.2.3.51.3.3.1.4.2.1.8 | ColumnualServerPowerAccess | read-write | mandatory | User can access the power on and restart functions for the remote server. These functions are available via the Power/Restart panel. |
| 1.3.6.1.4.1.2.3.51.3.3.1.4.2.1.9 | ColumnualAllowClearLog | read-write | mandatory | User can clear the event logs. Everyone can look at the event logs, but this particular permission is required to clear the logs. |
| 1.3.6.1.4.1.2.3.51.3.3.1.4.2.1.10 | ColumnualAdapterBasicConfig | read-write | mandatory | User can modify configuration parameters in the System Settings and Alerts panels. |
| 1.3.6.1.4.1.2.3.51.3.3.1.4.2.1.11 | ColumnualAdapterNetworkAndSecurityConfig | read-write | mandatory | User can modify configuration parameters in the Security, Network Protocols, Network Interface, Port Assignments, and Serial Port panels. |
| 1.3.6.1.4.1.2.3.51.3.3.1.4.2.1.12 | ColumnualAdapterAdvancedConfig | read-write | mandatory | User has no restrictions when configuring the adapter. In addition, the user is said to have administrative access to the IMM, meaning that the user can also p… |
| 1.3.6.1.4.1.2.3.51.3.3.1.5 | NodegroupProfiles | |||
| 1.3.6.1.4.1.2.3.51.3.3.1.5.1 | TablegroupIdsTable | not-accessible | mandatory | Table of Group profiles. This table lets you to configure all group profiles. You can define up to 16 unique profiles. |
| 1.3.6.1.4.1.2.3.51.3.3.1.5.1.1 | RowgroupIdsEntry | not-accessible | mandatory | Group ID entries. |
| 1.3.6.1.4.1.2.3.51.3.3.1.5.1.1.1 | ColumngroupIndex | read-only | mandatory | Index for Group IDs entry. |
| 1.3.6.1.4.1.2.3.51.3.3.1.5.1.1.2 | ColumngroupId | read-write | mandatory | Group ID. It is a null terminated string that contains the group-id. It must not be a duplicate of any previously configured ones. |
| 1.3.6.1.4.1.2.3.51.3.3.1.5.1.1.3 | ColumngroupRole | read-only | mandatory | Group Role. It indicates if the group has supervisor, operator, or custom access. |
| 1.3.6.1.4.1.2.3.51.3.3.1.5.2 | TablegroupRBSroleTable | not-accessible | mandatory | Table of Group Role profiles. |
| 1.3.6.1.4.1.2.3.51.3.3.1.5.2.1 | RowgroupRBSroleEntry | not-accessible | mandatory | Group Role entries. |
| 1.3.6.1.4.1.2.3.51.3.3.1.5.2.1.1 | ColumngroupRBSroleIndex | read-only | mandatory | Index for Group Role entry. |
| 1.3.6.1.4.1.2.3.51.3.3.1.5.2.1.2 | ColumngroupRBSroleId | read-only | mandatory | Group ID |
| 1.3.6.1.4.1.2.3.51.3.3.1.5.2.1.3 | ColumngroupRBSSupervisor | read-write | mandatory | Group has no restrictions. |
| 1.3.6.1.4.1.2.3.51.3.3.1.5.2.1.4 | ColumngroupRBSOperator | read-write | mandatory | Group has read-only access, and cannot perform any save, modify, clear, or state affecting operations (e.g. restart IMM, restore defaults, upgrade the firmware… |
| 1.3.6.1.4.1.2.3.51.3.3.1.5.2.1.5 | ColumngroupRBSNetworkSecurity | read-write | mandatory | Group can modify the configuration in the Security, Network Protocols, Network Interface, Port Assignments, and Serial Port panels. |
| 1.3.6.1.4.1.2.3.51.3.3.1.5.2.1.6 | ColumngroupRBSUserAccountManagement | read-write | mandatory | Group can add/modify/delete users and change the Global Login Settings in the Login Profiles panel. |
| 1.3.6.1.4.1.2.3.51.3.3.1.5.2.1.7 | ColumngroupRBSRemoteConsoleAccess | read-write | mandatory | Group can access the remote server console. |
| 1.3.6.1.4.1.2.3.51.3.3.1.5.2.1.8 | ColumngroupRBSRemoteConsoleRemoteDiskAccess | read-write | mandatory | Group can access the remote server console and the remote disk functions for the remote server. |
| 1.3.6.1.4.1.2.3.51.3.3.1.5.2.1.9 | ColumngroupRBSServerPowerRestartAccess | read-write | mandatory | Group can access the power on, restart and server timeout functions for the remote server. |
| 1.3.6.1.4.1.2.3.51.3.3.1.5.2.1.10 | ColumngroupRBSBasicAdapterConfiguration | read-write | mandatory | Group can modify configuration parameters in the System Settings (excluding Contact, Location and Server Timeouts) and Alerts panels. |
| 1.3.6.1.4.1.2.3.51.3.3.1.5.2.1.11 | ColumngroupRBSClearEventLog | read-write | mandatory | Group can clear the event logs. Everyone can look at the event logs, but this particular permission is required to clear the logs. |
| 1.3.6.1.4.1.2.3.51.3.3.1.5.2.1.12 | ColumngroupRBSAdvancedAdapterConfiguration | read-write | mandatory | Group has no restrictions when configuring the adapter. In addition the user is said to have administrative access to the IMM, meaning that the user can also p… |
| 1.3.6.1.4.1.2.3.51.3.3.1.6 | NodesshClientAuth | |||
| 1.3.6.1.4.1.2.3.51.3.3.1.6.1 | TablesshClientAuthPubKeyTable | not-accessible | mandatory | A table that contains client authentication public key information. |
| 1.3.6.1.4.1.2.3.51.3.3.1.6.1.1 | RowsshClientAuthPubKeyEntry | not-accessible | mandatory | A information list about a particular SSH public key used for client authentication. The primary table index is the same value as the associated remoteAccessId… |
| 1.3.6.1.4.1.2.3.51.3.3.1.6.1.1.1 | ColumnsshClientAuthRemoteAccessIdIndex | not-accessible | mandatory | The primary table index is the same value as the associated remoteAccessIdEntryIndex used as an index into the remoteAccessIdsTable. |
| 1.3.6.1.4.1.2.3.51.3.3.1.6.1.1.2 | ColumnsshClientAuthPubKeyIndex | not-accessible | mandatory | The secondary table index used to select one of the client authentication public keys for a particular remote access Id. The index is an integer value from 1 t… |
| 1.3.6.1.4.1.2.3.51.3.3.1.6.1.1.3 | ColumnsshClientAuthPubKeyType | read-only | mandatory | The type of the SSH public key represented by this entry. |
| 1.3.6.1.4.1.2.3.51.3.3.1.6.1.1.4 | ColumnsshClientAuthPubKeySize | read-only | mandatory | The size of the SSH public key represented by this entry. |
| 1.3.6.1.4.1.2.3.51.3.3.1.6.1.1.5 | ColumnsshClientAuthPubKeyFingerprint | read-only | mandatory | The RSA fingerprint of the SSH public key represented by this entry. This value can be used with the SSH client to verify, on the initial connection, that the … |
| 1.3.6.1.4.1.2.3.51.3.3.1.6.1.1.6 | ColumnsshClientAuthPubKeyAcceptFrom | read-write | mandatory | This is a filter that describes the set of SSH client IP addresses and host names that can establish SSH connections to the AMM authenticated by the public key… |
| 1.3.6.1.4.1.2.3.51.3.3.1.6.1.1.7 | ColumnsshClientAuthPubKeyComment | read-write | mandatory | This is a descriptive string that the administrator may use to help identify the public key represented by this entry. It serves no function in the operation o… |
| 1.3.6.1.4.1.2.3.51.3.3.1.6.1.1.8 | ColumnsshClientAuthPubKeyAction | read-write | mandatory | import(1) starts the TFTP file transfer of an SSH client authentication public key from the TFTP server to the AMM. The import operation is only accepted if th… |
| 1.3.6.1.4.1.2.3.51.3.3.1.6.1.1.9 | ColumnsshClientAuthPubKeyEntryStatus | read-write | mandatory | This object manages the creation and deletion of this entry. The steps recommended to install and to activate a new client authorization public key are: 1. Set… |
| 1.3.6.1.4.1.2.3.51.3.3.1.6.2 | ScalarsshClientAuthPubKeyUnused | read-only | mandatory | The number of available storage locations that may be used to install additional Client Authentication Public Keys. This number decreases by one when a new key… |
| 1.3.6.1.4.1.2.3.51.3.3.1.6.3 | ScalarsshClientAuthPubKeyTftpServer | read-write | mandatory | IP address or host name of the TFTP server where an SSH client authentication public key is to be installed from or exported to. The address must be entered in… |
| 1.3.6.1.4.1.2.3.51.3.3.1.6.4 | ScalarsshClientAuthPubKeyFileName | read-write | mandatory | File name on the TFTP server of an SSH client authentication public key. |
| 1.3.6.1.4.1.2.3.51.3.3.1.6.5 | ScalarsshClientAuthPubKeyFileFormat | read-write | mandatory | File format of SSH client authentication public key files imported from or exported to the TFTP file server. |
| 1.3.6.1.4.1.2.3.51.3.3.2 | NodespClock | |||
| 1.3.6.1.4.1.2.3.51.3.3.2.1 | ScalarspClockDateAndTimeSetting | read-write | mandatory | IMM clock date and time setting. A date-time specification for the local time of day. For example to set the date and time to March 4, 2001 at 06:00:00AM, set … |
| 1.3.6.1.4.1.2.3.51.3.3.2.2 | ScalarspClockTimezoneSetting | read-write | mandatory | IMM clock Greenwich Mean Time(GMT) offset and Daylight Saving Time(DST) settings. The following table lists GMT offsets and associated DST information. DST is … |
| 1.3.6.1.4.1.2.3.51.3.3.3 | NodespIdentification | |||
| 1.3.6.1.4.1.2.3.51.3.3.3.1 | ScalarspTxtId | read-write | mandatory | IMM text ID. Note: Do not put any 'space character' at end of the ID. |
| 1.3.6.1.4.1.2.3.51.3.3.3.2 | ScalarspRoomID | read-write | mandatory | Room where the system is located. In some hardware configurations this object can only be read. |
| 1.3.6.1.4.1.2.3.51.3.3.3.3 | ScalarspRackID | read-write | mandatory | ID for Rack that contains this system. In some hardware configurations this object can only be read. |
| 1.3.6.1.4.1.2.3.51.3.3.3.4 | ScalarspRackUnitPosition | read-write | mandatory | Position within the rack for this system. In some hardware configurations this object can only be read. |
| 1.3.6.1.4.1.2.3.51.3.3.3.5 | ScalarspRackUnitHeight | read-only | mandatory | Number of rack units occupied by this system. |
| 1.3.6.1.4.1.2.3.51.3.3.3.6 | ScalarspRackBladeBay | read-only | mandatory | Bay number for system contained in a blade chassis. |
| 1.3.6.1.4.1.2.3.51.3.3.3.7 | ScalarspFullPostalAddress | read-write | mandatory | A NULL terminated 300 byte string that contains the full postal address for this system. |
| 1.3.6.1.4.1.2.3.51.3.3.4 | NodenetworkConfiguration | |||
| 1.3.6.1.4.1.2.3.51.3.3.4.1 | NodenetworkInterfaces | |||
| 1.3.6.1.4.1.2.3.51.3.3.4.1.1 | NodeethernetInterface | |||
| 1.3.6.1.4.1.2.3.51.3.3.4.1.1.1 | ScalarethernetInterfaceType | read-only | mandatory | The type of interface. Indicates 'Ethernet-1'. |
| 1.3.6.1.4.1.2.3.51.3.3.4.1.1.2 | ScalarethernetInterfaceEnabled | read-write | mandatory | Disable or enable the interface. Note: To alter any of the configuration settings for the ethernet interface the following procedure should be used: (1)This ob… |
| 1.3.6.1.4.1.2.3.51.3.3.4.1.1.3 | ScalarethernetInterfaceHostName | read-write | mandatory | Contains the 64 byte null terminated DNS host name for this interface. |
| 1.3.6.1.4.1.2.3.51.3.3.4.1.1.4 | ScalarethernetInterfaceIPAddress | read-write | mandatory | Contains the IP address for the ethernet interface. |
| 1.3.6.1.4.1.2.3.51.3.3.4.1.1.5 | ScalarethernetInterfaceAutoNegotiate | read-write | mandatory | If this is enabled, then we should ignore Speed/Duplex. |
| 1.3.6.1.4.1.2.3.51.3.3.4.1.1.6 | ScalarethernetInterfaceDataRate | read-write | mandatory | Specifies the data transfer rate to be used over the ethernet interface 10Mb/100Mb/Auto. Note that the value of this variable is ignored if ethernetInterfaceAu… |
| 1.3.6.1.4.1.2.3.51.3.3.4.1.1.7 | ScalarethernetInterfaceDuplexSetting | read-write | mandatory | Specifies the duplex settings for the data transfer rate to be used over the ethernet interface Half/Full/Auto. |
| 1.3.6.1.4.1.2.3.51.3.3.4.1.1.8 | ScalarethernetInterfaceLAA | read-write | mandatory | Specifies the locally administered MAC address. The locally administered address must be a hexadecimal value between 000000000000 - FFFFFFFFFFFF. This value mu… |
| 1.3.6.1.4.1.2.3.51.3.3.4.1.1.9 | ScalarethernetInterfaceDhcpEnabled | read-write | mandatory | Disable or enable DHCP on this interface. |
| 1.3.6.1.4.1.2.3.51.3.3.4.1.1.10 | ScalarethernetInterfaceGatewayIPAddress | read-write | mandatory | Contains the IP address of the gateway/router for the ethernet interface. |
| 1.3.6.1.4.1.2.3.51.3.3.4.1.1.11 | ScalarethernetInterfaceBIA | read-only | mandatory | Specifies the burned-in MAC (BIA) address. |
| 1.3.6.1.4.1.2.3.51.3.3.4.1.1.12 | ScalarethernetInterfaceMTU | read-write | mandatory | Contains the Maximum Transmission Unit(MTU) for the ethernet interface |
| 1.3.6.1.4.1.2.3.51.3.3.4.1.1.13 | ScalarethernetInterfaceSubnetMask | read-write | mandatory | Contains the Subnet Mask for the ethernet interface |
| 1.3.6.1.4.1.2.3.51.3.3.4.1.1.14 | NodedhcpEthernetInterface | |||
| 1.3.6.1.4.1.2.3.51.3.3.4.1.1.14.1 | ScalardhcpHostName | read-only | mandatory | Contains the 64 byte null terminated DNS host name for this interface, assigned by the DHCP server. |
| 1.3.6.1.4.1.2.3.51.3.3.4.1.1.14.2 | ScalardhcpIPAddress | read-only | mandatory | Contains the IP address for the ehternet interface, assigned by the DHCP server. |
| 1.3.6.1.4.1.2.3.51.3.3.4.1.1.14.3 | ScalardhcpGatewayIPAddress | read-only | mandatory | Contains the IP address of the gateway/router for the ethernet interface, assigned by the DHCP server. |
| 1.3.6.1.4.1.2.3.51.3.3.4.1.1.14.4 | ScalardhcpSubnetMask | read-only | mandatory | Contains the Subnet Mask for the ethernet interface, assigned by the DHCP server. |
| 1.3.6.1.4.1.2.3.51.3.3.4.1.1.14.5 | ScalardhcpDomainName | read-only | mandatory | Contains the 64 byte null terminated Domain Name for this interface, assigned by the DHCP server. |
| 1.3.6.1.4.1.2.3.51.3.3.4.1.1.14.6 | ScalardhcpPrimaryDNSServer | read-only | mandatory | Contains the Primary DNS server, assigned by the DHCP server. |
| 1.3.6.1.4.1.2.3.51.3.3.4.1.1.14.7 | ScalardhcpSecondaryDNSServer | read-only | mandatory | Contains the Secondary DNS server, assigned by the DHCP server. |
| 1.3.6.1.4.1.2.3.51.3.3.4.1.1.14.8 | ScalardhcpTertiaryDNSServer | read-only | mandatory | Contains the tertiary DNS server, assigned by the DHCP server. |
| 1.3.6.1.4.1.2.3.51.3.3.4.1.1.15 | ScalarethernetInterfaceVlan | read-write | mandatory | If this is enabled, assign VLAN ID needs to be assigned. NOTE: This is not supported on blades. |
| 1.3.6.1.4.1.2.3.51.3.3.4.1.1.16 | ScalarethernetInterfaceVlanID | read-write | mandatory | Contains the VLAN ID for the ethernet interface. NOTE: This is not supported in blades. |
| 1.3.6.1.4.1.2.3.51.3.3.4.1.4 | NodeethernetInterfaceIPv6 | |||
| 1.3.6.1.4.1.2.3.51.3.3.4.1.4.2 | ScalarethernetInterfaceIPv6Enabled | read-write | mandatory | The current IPv6 enabled or disabled state of this IMM. NOTE: If IPv6 address(es) have been configured for one or more interfaces/protocols/services on this IM… |
| 1.3.6.1.4.1.2.3.51.3.3.4.1.4.5 | NodeethernetInterfaceIPv6Config | |||
| 1.3.6.1.4.1.2.3.51.3.3.4.1.4.5.1 | NodeethernetInterfaceIPv6LocalAddress | |||
| 1.3.6.1.4.1.2.3.51.3.3.4.1.4.5.1.1 | ScalarethernetInterfaceIPv6LinkLocalAddress | read-only | mandatory | The IPv6 link local IP address for the ethernet interface. NOTE: If ethernetInterfaceIPv6Enabled is currently disabled, this object has the value '0:0:0:0:0:0:… |
| 1.3.6.1.4.1.2.3.51.3.3.4.1.4.5.2 | NodeethernetInterfaceIPv6StaticIPConfig | |||
| 1.3.6.1.4.1.2.3.51.3.3.4.1.4.5.2.1 | ScalarethernetInterfaceIPv6StaticIPConfigEnabled | read-write | mandatory | The IPv6 static IP address enabled or disabled state for the ethernet interface. |
| 1.3.6.1.4.1.2.3.51.3.3.4.1.4.5.2.2 | ScalarethernetInterfaceIPv6StaticIPAddress | read-write | mandatory | The IPv6 static IP address for the ethernet interface. NOTE: If ethernetInterfaceIPv6Enabled is currently disabled, this object has the value '0:0:0:0:0:0:0:0'. |
| 1.3.6.1.4.1.2.3.51.3.3.4.1.4.5.2.3 | ScalarethernetInterfaceIPv6StaticIPAddressPrefixLen | read-write | mandatory | The IPv6 static IP address prefix length for the ethernet interface. NOTE: If ethernetInterfaceIPv6Enabled is currently disabled, this object has the value 0. |
| 1.3.6.1.4.1.2.3.51.3.3.4.1.4.5.2.4 | ScalarethernetInterfaceIPv6StaticIPDefaultRoute | read-write | mandatory | The IPv6 static IP address default route for the ethernet interface. NOTE: If ethernetInterfaceIPv6Enabled is currently disabled, this object has the value '0:… |
| 1.3.6.1.4.1.2.3.51.3.3.4.1.4.5.3 | NodeethernetInterfaceIPv6AutoIPConfig | |||
| 1.3.6.1.4.1.2.3.51.3.3.4.1.4.5.3.2 | NodeethernetInterfaceDHCPv6Config | |||
| 1.3.6.1.4.1.2.3.51.3.3.4.1.4.5.3.2.1 | ScalarethernetInterfaceDHCPv6Enabled | read-write | mandatory | The DHCPv6 enabled or disabled state for the ethernet interface. NOTE: If ethernetInterfaceIPv6StatelessAutoConfigEnabled is currently disabled, Disabling ethe… |
| 1.3.6.1.4.1.2.3.51.3.3.4.1.4.5.3.2.2 | ScalarethernetInterfaceDHCPv6IPAddress | read-only | mandatory | The IPv6 address for the ethernet interface, assigned by DHCPv6 server. NOTE: If ethernetInterfaceIPv6Enabled or ethernetInterfaceDHCPv6Enabled is disabled or … |
| 1.3.6.1.4.1.2.3.51.3.3.4.1.4.5.3.2.4 | ScalarethernetInterfaceDHCPv6DomainName | read-only | mandatory | The 64 byte Domain Name for the ethernet interface, assigned by the DHCPv6 server. NOTE: If ethernetInterfaceIPv6Enabled or ethernetInterfaceDHCPv6Enabled is d… |
| 1.3.6.1.4.1.2.3.51.3.3.4.1.4.5.3.2.5 | ScalarethernetInterfaceDHCPv6PrimaryDNSServer | read-only | mandatory | The primary DNS server, assigned by the DHCPv6 server. NOTE: If ethernetInterfaceIPv6Enabled or ethernetInterfaceDHCPv6Enabled is disabled or if DHCPv6 server … |
| 1.3.6.1.4.1.2.3.51.3.3.4.1.4.5.3.2.6 | ScalarethernetInterfaceDHCPv6SecondaryDNSServer | read-only | mandatory | The secondary DNS server, assigned by the DHCPv6 server. NOTE: If ethernetInterfaceIPv6Enabled or ethernetInterfaceDHCPv6Enabled is disabled or if DHCPv6 serve… |
| 1.3.6.1.4.1.2.3.51.3.3.4.1.4.5.3.2.7 | ScalarethernetInterfaceDHCPv6TertiaryDNSServer | read-only | mandatory | The tertiary DNS server, assigned by the DHCPv6 server. NOTE: If ethernetInterfaceIPv6Enabled or ethernetInterfaceDHCPv6Enabled is disabled or if DHCPv6 server… |
| 1.3.6.1.4.1.2.3.51.3.3.4.1.4.5.3.2.8 | ScalarethernetInterfaceDHCPv6Server | read-only | mandatory | The DHCPv6 server IPv6 address used to acquire the DHCP settings. NOTE: If ethernetInterfaceIPv6Enabled or ethernetInterfaceDHCPv6Enabled is disabled or if DHC… |
| 1.3.6.1.4.1.2.3.51.3.3.4.1.4.5.3.3 | NodeethernetInterfaceIPv6StatelessAutoConfig | |||
| 1.3.6.1.4.1.2.3.51.3.3.4.1.4.5.3.3.1 | ScalarethernetInterfaceIPv6StatelessAutoConfigEnabled | read-write | mandatory | The IPv6 stateless auto-configuration enabled or disabled state for the ethernet interface. NOTE: If EthernetfInterfaceDHCPv6Enabled is currently disabled, Dis… |
| 1.3.6.1.4.1.2.3.51.3.3.4.1.4.5.3.3.2 | TableethernetInterfaceStatelessAutoConfigAddressesTable | not-accessible | mandatory | Table of stateless Auto-Config addresses entries |
| 1.3.6.1.4.1.2.3.51.3.3.4.1.4.5.3.3.2.1 | RowethernetInterfaceStatelessAutoConfigAddressesEntry | not-accessible | mandatory | Stateless Auto-Config address entries |
| 1.3.6.1.4.1.2.3.51.3.3.4.1.4.5.3.3.2.1.1 | ColumnethernetInterfaceStatelessAutoConfigAddressesIndex | read-only | mandatory | Index for stateless Auto-Config addresses. NOTE: If ethernetInterfaceIPv6StatelessAutoConfigEnabled or ethernetInterfaceIPv6Enabled is currently disabled, this… |
| 1.3.6.1.4.1.2.3.51.3.3.4.1.4.5.3.3.2.1.2 | ColumnethernetInterfaceStatelessAutoConfigAddresses | read-only | mandatory | The stateless Auto-Configuration IPv6 address. NOTE: If ethernetInterfaceIPv6StatelessAutoConfigEnabled or ethernetInterfaceIPv6Enabled is currently disabled, … |
| 1.3.6.1.4.1.2.3.51.3.3.4.1.4.5.3.3.2.1.3 | ColumnethernetInterfaceStatelessAutoConfigAddressesPrefixLen | read-only | mandatory | The stateless Auto-Configration address prefix length. NOTE: If ethernetInterfaceIPv6StatelessAutoConfigEnabled or ethernetInterfaceIPv6Enabled is currently di… |
| 1.3.6.1.4.1.2.3.51.3.3.4.1.5 | NodevlansSM | |||
| 1.3.6.1.4.1.2.3.51.3.3.4.1.5.1 | NodevlansSMvlan1config | |||
| 1.3.6.1.4.1.2.3.51.3.3.4.1.5.1.1 | ScalarvlansSMvlan1Name | read-write | mandatory | The name of VLAN1, 1-64 characters. |
| 1.3.6.1.4.1.2.3.51.3.3.4.1.5.1.2 | ScalarvlansSMvlan1vlanId | read-write | mandatory | The VLAN ID for VLAN1. |
| 1.3.6.1.4.1.2.3.51.3.3.4.1.5.1.3 | ScalarvlansSMvlan1State | read-write | mandatory | The state of VLAN1 |
| 1.3.6.1.4.1.2.3.51.3.3.4.1.5.1.4 | ScalarvlansSMvlan1RemoteControl | read-write | mandatory | The state of the Remote Control feature for VLAN1. Note that Remote Control can only be enabled on one VLAN. |
| 1.3.6.1.4.1.2.3.51.3.3.4.1.5.1.5 | ScalarvlansSMvlan1SSerialOverLan | read-write | mandatory | The state of the Serail Over LAN feature for VLAN1. Note that Serial Over LAN can only be enabled on one VLAN. |
| 1.3.6.1.4.1.2.3.51.3.3.4.1.5.2 | NodevlansSMvlan2config | |||
| 1.3.6.1.4.1.2.3.51.3.3.4.1.5.2.1 | ScalarvlansSMvlan2Name | read-write | mandatory | The name of VLAN1, 1-64 characters. |
| 1.3.6.1.4.1.2.3.51.3.3.4.1.5.2.2 | ScalarvlansSMvlan2vlanId | read-write | mandatory | The VLAN ID for VLAN2. |
| 1.3.6.1.4.1.2.3.51.3.3.4.1.5.2.3 | ScalarvlansSMvlan2State | read-write | mandatory | The state of VLAN2 |
| 1.3.6.1.4.1.2.3.51.3.3.4.1.5.2.4 | ScalarvlansSMvlan2RemoteControl | read-write | mandatory | The state of the Remote Control feature for VLAN2. Note that Remote Control can only be enabled on one VLAN. |
| 1.3.6.1.4.1.2.3.51.3.3.4.1.5.2.5 | ScalarvlansSMvlan2SerialOverLan | read-write | mandatory | The state of the Serail Over LAN feature for VLAN2. Note that Serial Over LAN can only be enabled on one VLAN. |
| 1.3.6.1.4.1.2.3.51.3.3.4.1.5.2.6 | NodevlansSMvlan2ipv4Config | |||
| 1.3.6.1.4.1.2.3.51.3.3.4.1.5.2.6.1 | ScalarvlansSMvlan2IPv4Address | read-write | mandatory | Contains the IPv4 address for the VLAN2 interface. |
| 1.3.6.1.4.1.2.3.51.3.3.4.1.5.2.6.2 | ScalarvlansSMvlan2IPv4Gateway | read-write | mandatory | Contains the Gateway IPv4 address for the VLAN2 interface. |
| 1.3.6.1.4.1.2.3.51.3.3.4.1.5.2.6.3 | ScalarvlansSMvlan2IPv4SubnetMask | read-write | mandatory | Contains the Subnet Mask for the IPv4 address for the VLAN2 interface. |
| 1.3.6.1.4.1.2.3.51.3.3.4.1.5.2.7 | NodevlansSMvlan2ipv6Config | |||
| 1.3.6.1.4.1.2.3.51.3.3.4.1.5.2.7.1 | ScalarvlansSMvlan2IPv6Address | read-write | mandatory | Contains the IPv6 address for the VLAN2 interface. |
| 1.3.6.1.4.1.2.3.51.3.3.4.1.5.2.7.2 | ScalarvlansSMvlan2IPv6Gateway | read-write | mandatory | Contains the Gateway IPv6 address for the VLAN2 interface. |
| 1.3.6.1.4.1.2.3.51.3.3.4.1.5.2.7.3 | ScalarvlansSMvlan2IPv6PrefixLength | read-write | mandatory | Contains the Prefix Length for the IPv6 address for the VLAN2 interface. |
| 1.3.6.1.4.1.2.3.51.3.3.4.1.5.2.8 | NodevlansSMvlan2ipv4StatusRoutes | |||
| 1.3.6.1.4.1.2.3.51.3.3.4.1.5.2.8.1 | ScalarvlansSMvlan2IPv4StaticRouteIP1 | read-write | mandatory | Contains the IPv4 address for the first IPv4 static route. |
| 1.3.6.1.4.1.2.3.51.3.3.4.1.5.2.8.2 | ScalarvlansSMvlan2IPv4StaticRouteSM1 | read-write | mandatory | Contains the Subnet Mask for the first IPv4 static route. |
| 1.3.6.1.4.1.2.3.51.3.3.4.1.5.2.8.3 | ScalarvlansSMvlan2IPv4StaticRouteIP2 | read-write | mandatory | Contains the IPv4 address for the second IPv4 static route. |
| 1.3.6.1.4.1.2.3.51.3.3.4.1.5.2.8.4 | ScalarvlansSMvlan2IPv4StaticRouteSM2 | read-write | mandatory | Contains the Subnet Mask for the second IPv4 static route. |
| 1.3.6.1.4.1.2.3.51.3.3.4.1.5.2.8.5 | ScalarvlansSMvlan2IPv4StaticRouteIP3 | read-write | mandatory | Contains the IPv4 address for the third IPv4 static route. |
| 1.3.6.1.4.1.2.3.51.3.3.4.1.5.2.8.6 | ScalarvlansSMvlan2IPv4StaticRouteSM3 | read-write | mandatory | Contains the Subnet Mask for the third IPv4 static route. |
| 1.3.6.1.4.1.2.3.51.3.3.4.1.5.2.9 | NodevlansSMvlan2ipv6StatusRoutes | |||
| 1.3.6.1.4.1.2.3.51.3.3.4.1.5.2.9.1 | ScalarvlansSMvlan2IPv6StaticRouteIP1 | read-write | mandatory | Contains the IPv6 address for the first IPv6 static route. |
| 1.3.6.1.4.1.2.3.51.3.3.4.1.5.2.9.2 | ScalarvlansSMvlan2IPv6StaticRoutePL1 | read-write | mandatory | Contains the Prefix Length for the first IPv6 static route. |
| 1.3.6.1.4.1.2.3.51.3.3.4.1.5.2.9.3 | ScalarvlansSMvlan2IPv6StaticRouteIP2 | read-write | mandatory | Contains the IPv6 address for the second IPv6 static route. |
| 1.3.6.1.4.1.2.3.51.3.3.4.1.5.2.9.4 | ScalarvlansSMvlan2IPv6StaticRoutePL2 | read-write | mandatory | Contains the Prefix Length for the second IPv6 static route. |
| 1.3.6.1.4.1.2.3.51.3.3.4.1.5.2.9.5 | ScalarvlansSMvlan2IPv6StaticRouteIP3 | read-write | mandatory | Contains the IPv6 address for the third IPv6 static route. |
| 1.3.6.1.4.1.2.3.51.3.3.4.1.5.2.9.6 | ScalarvlansSMvlan2IPv6StaticRoutePL3 | read-write | mandatory | Contains the Prefix Length for the third IPv6 static route. |
| 1.3.6.1.4.1.2.3.51.3.3.4.1.5.3 | NodevlansSMvlanControl | |||
| 1.3.6.1.4.1.2.3.51.3.3.4.1.5.3.1 | ScalarvlansSMvlanConfigRevertTimout | read-write | mandatory | Contains the VLAN Config Revert Timeout value. |
| 1.3.6.1.4.1.2.3.51.3.3.4.1.5.3.2 | ScalarvlansSMvlanAction | write-only | mandatory | When the 'apply' setting is written, the VLANs for System Management settings will be applied and take affect. The settings will not be saved until the 'commit… |
| 1.3.6.1.4.1.2.3.51.3.3.4.1.10 | ScalarddnsStatus | read-write | mandatory | Dynamic DNS provides the capability for a networked device to notify a domain name server to change, in real time, the active DNS configuration of its configur… |
| 1.3.6.1.4.1.2.3.51.3.3.4.1.11 | ScalarhostName | read-write | mandatory | Contains the DNS host name for this system. This object provides the exact same function as ethernetInterfaceHostName |
| 1.3.6.1.4.1.2.3.51.3.3.4.1.12 | ScalarddnsDomainToUse | read-write | mandatory | The domain name to be used with Dynamic DNS. The value shall be either dhcp or manual |
| 1.3.6.1.4.1.2.3.51.3.3.4.1.13 | ScalardomainName | read-write | mandatory | The user assigned DNS domain name. |
| 1.3.6.1.4.1.2.3.51.3.3.4.1.14 | NodelanOverUSBInterface | |||
| 1.3.6.1.4.1.2.3.51.3.3.4.1.14.1 | ScalarimmUSBIPAddress | read-write | mandatory | Contains the IP address for the LAN over USB of IMM. |
| 1.3.6.1.4.1.2.3.51.3.3.4.1.14.2 | ScalarimmUSBSubnetMask | read-write | mandatory | Contains the Subnet Mask for the LAN over USB of IMM. |
| 1.3.6.1.4.1.2.3.51.3.3.4.1.14.3 | ScalarosUSBIPAddress | read-write | mandatory | Contains the IP address for the LAN over USB of OS. |
| 1.3.6.1.4.1.2.3.51.3.3.4.2 | NodetcpProtocols | |||
| 1.3.6.1.4.1.2.3.51.3.3.4.2.1 | NodesnmpAgentConfig | |||
| 1.3.6.1.4.1.2.3.51.3.3.4.2.1.1 | ScalarsnmpSystemName | read-write | mandatory | A NULL terminated 48 byte string that contains the SNMP agent name. |
| 1.3.6.1.4.1.2.3.51.3.3.4.2.1.2 | ScalarsnmpSystemContact | read-write | mandatory | A NULL terminated 48 byte string that contains the SNMP agent contact name. |
| 1.3.6.1.4.1.2.3.51.3.3.4.2.1.3 | ScalarsnmpSystemLocation | read-write | mandatory | A NULL terminated 48 byte string that contains the SNMP agent location name. |
| 1.3.6.1.4.1.2.3.51.3.3.4.2.1.4 | ScalarsnmpSystemAgentTrapsDisable | read-write | mandatory | Disable or enable SNMP traps. |
| 1.3.6.1.4.1.2.3.51.3.3.4.2.1.5 | NodesnmpAgentCommunityConfig | |||
| 1.3.6.1.4.1.2.3.51.3.3.4.2.1.5.1 | TablesnmpCommunityTable | not-accessible | mandatory | Table of SNMP Community entries |
| 1.3.6.1.4.1.2.3.51.3.3.4.2.1.5.1.1 | RowsnmpCommunityEntry | not-accessible | mandatory | Community table entries |
| 1.3.6.1.4.1.2.3.51.3.3.4.2.1.5.1.1.1 | ColumnsnmpCommunityEntryIndex | read-only | mandatory | Index for SNMP Agent Community entry. |
| 1.3.6.1.4.1.2.3.51.3.3.4.2.1.5.1.1.2 | ColumnsnmpCommunityEntryCommunityName | read-write | mandatory | SNMP Community entry name. Note: Set snmpSystemAgentEnable to disabled before performing a set of this object. |
| 1.3.6.1.4.1.2.3.51.3.3.4.2.1.5.1.1.3 | ColumnsnmpCommunityEntryCommunityIpAddress1 | read-write | mandatory | SNMP Community IP address or host name. Can either be a dotted decimal IP string(eg. 9.37.44.2) or host name. This field also allows two wildcard values for re… |
| 1.3.6.1.4.1.2.3.51.3.3.4.2.1.5.1.1.4 | ColumnsnmpCommunityEntryCommunityIpAddress2 | read-write | mandatory | SNMP Community IP address or host name. Can either be a dotted decimal IP string(eg. 9.37.44.2) or a host name. This field also allows two wildcard values for … |
| 1.3.6.1.4.1.2.3.51.3.3.4.2.1.5.1.1.5 | ColumnsnmpCommunityEntryCommunityIpAddress3 | read-write | mandatory | SNMP Community IP address or host name. Can either be a dotted decimal IP string(eg. 9.37.44.2) or a host name. This field also allows two wildcard values for … |
| 1.3.6.1.4.1.2.3.51.3.3.4.2.1.5.1.1.6 | ColumnsnmpCommunityEntryCommunityViewType | read-write | mandatory | Access Level of the SNMPv1 managers. Note this parameter is set for each community. Therefore all three managers in the same community have the same access lev… |
| 1.3.6.1.4.1.2.3.51.3.3.4.2.1.6 | Scalarsnmpv1SystemAgentEnable | read-write | mandatory | Disable or enable the SNMPv1 agent. Note: When this object has a value of enabled the fields listed below are checked. If this verification fails an error resp… |
| 1.3.6.1.4.1.2.3.51.3.3.4.2.1.7 | Scalarsnmpv3SystemAgentEnable | read-write | mandatory | Disable or enable the SNMPv3 agent. Note: To alter any of the configuration settings for the SNMP Agent the following procedure should be used: (1)This object … |
| 1.3.6.1.4.1.2.3.51.3.3.4.2.1.8 | NodesnmpAgentUserProfileConfig | |||
| 1.3.6.1.4.1.2.3.51.3.3.4.2.1.8.1 | TablesnmpUserProfileTable | not-accessible | mandatory | Table of SNMPv3 User Profile entries |
| 1.3.6.1.4.1.2.3.51.3.3.4.2.1.8.1.1 | RowsnmpUserProfileEntry | not-accessible | mandatory | SNMP User Profile entries |
| 1.3.6.1.4.1.2.3.51.3.3.4.2.1.8.1.1.1 | ColumnsnmpUserProfileEntryIndex | read-only | mandatory | Index for SNMPv3 Agent User Profile entry. |
| 1.3.6.1.4.1.2.3.51.3.3.4.2.1.8.1.1.2 | ColumnsnmpUserProfileEntryAuthProt | read-write | mandatory | SNMPv3 User Profile entry - Authentication Protocol supported by the user. |
| 1.3.6.1.4.1.2.3.51.3.3.4.2.1.8.1.1.3 | ColumnsnmpUserProfileEntryPrivProt | read-write | mandatory | SNMPv3 User Profile entry - Privacy Protocol supported by the user. The Privacy Password must be set and the Authentication Protocol must be md5 or sha before … |
| 1.3.6.1.4.1.2.3.51.3.3.4.2.1.8.1.1.4 | ColumnsnmpUserProfileEntryPrivPassword | read-write | mandatory | SNMPv3 User Profile entry - Privacy password for the user. NOTE: Value returned for the GET command is meaningless for this MIB object for security reason. |
| 1.3.6.1.4.1.2.3.51.3.3.4.2.1.8.1.1.5 | ColumnsnmpUserProfileEntryViewType | read-write | mandatory | SNMPv3 User Profile entry - Access level (Get and Set) of the user. |
| 1.3.6.1.4.1.2.3.51.3.3.4.2.1.8.1.1.6 | ColumnsnmpUserProfileEntryIpAddress | read-write | mandatory | SNMPv3 User Profile entry - IP address or host name. Can either be a dotted decimal IP string (e.g. 9.37.44.2) or if DNS is enabled a host name. |
| 1.3.6.1.4.1.2.3.51.3.3.4.2.2 | NodednsConfig | |||
| 1.3.6.1.4.1.2.3.51.3.3.4.2.2.1 | ScalardnsEnabled | read-write | mandatory | Disable or enable the DNS agent. Note that when this object has a value of enabled that the following is verifed, if this verification fails a error response w… |
| 1.3.6.1.4.1.2.3.51.3.3.4.2.2.2 | ScalardnsServerIPAddress1 | read-write | mandatory | Contains the primary DNS server IP address. |
| 1.3.6.1.4.1.2.3.51.3.3.4.2.2.3 | ScalardnsServerIPAddress2 | read-write | mandatory | Contains the secondary DNS server IP address. |
| 1.3.6.1.4.1.2.3.51.3.3.4.2.2.4 | ScalardnsServerIPAddress3 | read-write | mandatory | Contains the tertiary DNS server IP address. |
| 1.3.6.1.4.1.2.3.51.3.3.4.2.2.12 | ScalardnsServerIPv6Address1 | read-write | mandatory | Contains the primary IPv6 DNS server address. |
| 1.3.6.1.4.1.2.3.51.3.3.4.2.2.13 | ScalardnsServerIPv6Address2 | read-write | mandatory | Contains the secondary IPv6 DNS server address. |
| 1.3.6.1.4.1.2.3.51.3.3.4.2.2.14 | ScalardnsServerIPv6Address3 | read-write | mandatory | Contains the tertiary IPv6 DNS server address. |
| 1.3.6.1.4.1.2.3.51.3.3.4.2.2.20 | ScalardnsPriority | read-write | mandatory | Tells the order host names are resolved. The options are to either first resolve with an IPv6 DNS server or to first resolve with an IPv6 DNS server. |
| 1.3.6.1.4.1.2.3.51.3.3.4.2.3 | NodesmtpConfig | |||
| 1.3.6.1.4.1.2.3.51.3.3.4.2.3.1 | ScalarsmtpServerNameOrIPAddress | read-write | mandatory | A NULL terminated 64 byte string that contains the SMTP server Host name or IP address(a.b.c.d). |
| 1.3.6.1.4.1.2.3.51.3.3.4.2.3.2 | ScalarsmtpServerPort | read-write | mandatory | SMTP server port number. |
| 1.3.6.1.4.1.2.3.51.3.3.4.2.3.3 | ScalarsmtpServerAuthentication | read-write | mandatory | Enable/disable SMTP-AUTH function. smtpServerAuthenticationUser and smtpServerAuthenticationPassword must be SET before smtpServerAuthentication is enabled or … |
| 1.3.6.1.4.1.2.3.51.3.3.4.2.3.4 | ScalarsmtpServerAuthenticationUser | read-write | mandatory | SMTP authentication user name |
| 1.3.6.1.4.1.2.3.51.3.3.4.2.3.5 | ScalarsmtpServerAuthenticationPassword | read-write | mandatory | SMTP authentication password. On a read a NULL string will be returned for security reasons. |
| 1.3.6.1.4.1.2.3.51.3.3.4.2.3.6 | ScalarsmtpServerAuthenticationMethod | read-write | mandatory | SMTP authentication method , support CRAM-MD5 and PLAIN only |
| 1.3.6.1.4.1.2.3.51.3.3.4.2.3.7 | ScalarsmtpServerReversePath | read-write | mandatory | A NULL terminated 256 byte string that contains the SMTP Reverse Path. The user can substitute their own sender information in place of the IMM2 default sender… |
| 1.3.6.1.4.1.2.3.51.3.3.4.2.4 | NodetcpApplicationConfig | |||
| 1.3.6.1.4.1.2.3.51.3.3.4.2.4.1 | ScalartelnetConnectionCounts | read-write | mandatory | The number of telnet connections that can be active concurrently. |
| 1.3.6.1.4.1.2.3.51.3.3.4.2.4.2 | ScalarslpAddrType | read-write | mandatory | Set SLP address type to 0 (multicast) or 1 (broadcast). Note that when slpAddrType is set to broadast value then the multicast address set in in slpMulticastAd… |
| 1.3.6.1.4.1.2.3.51.3.3.4.2.4.3 | ScalarslpMulticastAddr | read-only | mandatory | Service Locator Protocol Multicast address |
| 1.3.6.1.4.1.2.3.51.3.3.4.2.4.5 | NodesshServerConfig | |||
| 1.3.6.1.4.1.2.3.51.3.3.4.2.4.5.1 | ScalarsshServerHostKeySize | read-only | mandatory | The size of the public/private host key pair. NOTE: The IMM supports only the bits1048 value. |
| 1.3.6.1.4.1.2.3.51.3.3.4.2.4.5.2 | ScalarsshServerHostKeyFingerprint | read-only | mandatory | The RSA fingerprint of the public part of the host key pair. This value can be used with the SSH client to verify, on the initial connection, that the Secure S… |
| 1.3.6.1.4.1.2.3.51.3.3.4.2.4.5.3 | ScalarsshServerHostKeyGenerate | read-write | mandatory | Initiate the new Host Keys generation process for the IMM SSH Server. NOTE: Value returned for the GET command is meaningless for this MIB object. |
| 1.3.6.1.4.1.2.3.51.3.3.4.2.4.5.4 | ScalarsshServerHostKeyGenerateProgress | read-only | mandatory | Indicate the progress of the key generation process. |
| 1.3.6.1.4.1.2.3.51.3.3.4.2.4.5.5 | ScalarsshEnable | read-write | mandatory | Disable/Enable SSH. |
| 1.3.6.1.4.1.2.3.51.3.3.4.2.4.6 | NodesslConfig | |||
| 1.3.6.1.4.1.2.3.51.3.3.4.2.4.6.1 | NodesslHTTPSServerConfigForWeb | |||
| 1.3.6.1.4.1.2.3.51.3.3.4.2.4.6.1.1 | ScalarsslEnableHTTPSforWeb | read-write | mandatory | Disable/Enable HTTPS support for web. Use this field to enable or disable SSL for the web interface. The IMM must be restarted before the selected value (enabl… |
| 1.3.6.1.4.1.2.3.51.3.3.4.2.4.6.1.2 | ScalarsslHTTPSServerWebCertificateGeneration | read-write | mandatory | Initiate the new key and certificate generation process for the web HTTPS. The required fields in sslCertificateData must be set to valid contents. generateNew… |
| 1.3.6.1.4.1.2.3.51.3.3.4.2.4.6.1.3 | ScalarsslHTTPSServerWebCertificateTransfer | read-write | mandatory | sslConfigTftpServer and sslConfigFileName must contain valid values. importSignedCertificate - Use this to import a signed certificate. To obtain a signed cert… |
| 1.3.6.1.4.1.2.3.51.3.3.4.2.4.6.1.4 | ScalarsslHTTPSWebCertificateStatus | read-only | mandatory | Get the status of the installed Web certificates. 1 = Private Key and Cert/CSR not available. 2 = Private Key and Self-signed cert installed. 3 = Private Key a… |
| 1.3.6.1.4.1.2.3.51.3.3.4.2.4.6.1.5 | ScalarsslHTTPSWebCertificateExpirationDate | read-only | mandatory | Expiration date of the HTTPS Web Server certificate. |
| 1.3.6.1.4.1.2.3.51.3.3.4.2.4.6.1.6 | ScalarsslHTTPSWebCertificateRemove | write-only | mandatory | removeServerCertificate - Remove HTTPS Web Server certificate. |
| 1.3.6.1.4.1.2.3.51.3.3.4.2.4.6.2 | NodesslHTTPSServerConfigForCIMXML | |||
| 1.3.6.1.4.1.2.3.51.3.3.4.2.4.6.2.1 | ScalarsslEnableHTTPSforCIMXML | read-write | mandatory | Disable/Enable HTTPS support for web. Use this field to enable or disable SSL for the web interface. The IMM must be restarted before the selected value (enabl… |
| 1.3.6.1.4.1.2.3.51.3.3.4.2.4.6.2.2 | ScalarsslHTTPSServerCIMXMLCertificateGeneration | read-write | mandatory | Initiate the new key and certificate generation process for CIMXML communication. The required fields in sslCertificateData must be set to valid contents. gene… |
| 1.3.6.1.4.1.2.3.51.3.3.4.2.4.6.2.3 | ScalarsslHTTPSServerCIMXMLCertificateTransfer | read-write | mandatory | sslConfigTftpServer and sslConfigFileName must contain valid values. importSignedCertificate - Use this to import a signed certificate. To obtain a signed cert… |
| 1.3.6.1.4.1.2.3.51.3.3.4.2.4.6.2.4 | ScalarsslHTTPSCIMXMLCertificateStatus | read-only | mandatory | Get the status of the installed CIM/XML certificates. 1 = Private Key and Cert/CSR not available. 2 = Private Key and Self-signed cert installed. 3 = Private K… |
| 1.3.6.1.4.1.2.3.51.3.3.4.2.4.6.2.5 | ScalarsslHTTPSCIMXMLCertificateExpirationDate | read-only | mandatory | Expiration date of the HTTPS CIM/XML Server certificate. |
| 1.3.6.1.4.1.2.3.51.3.3.4.2.4.6.2.6 | ScalarsslHTTPSCIMXMLCertificateRemove | write-only | mandatory | removeServerCertificate - Remove HTTPS CIM/XML Server certificate. |
| 1.3.6.1.4.1.2.3.51.3.3.4.2.4.6.3 | NodesslClientConfigForLDAP | |||
| 1.3.6.1.4.1.2.3.51.3.3.4.2.4.6.3.1 | ScalarsslEnableClientLDAP | read-write | mandatory | Use this field to enable or disable SSL for the LDAP Client. The value selected takes effect immediately. Note that in order to enable SSL, a valid SSL certifi… |
| 1.3.6.1.4.1.2.3.51.3.3.4.2.4.6.3.2 | ScalarsslClientLDAPCertificateGeneration | read-write | mandatory | Initiate the new key and certificate generation process for the LDAP Client Certificates. The required fields in sslCertificateData must be set to valid conten… |
| 1.3.6.1.4.1.2.3.51.3.3.4.2.4.6.3.3 | ScalarsslClientLDAPCertificateDownload | read-write | mandatory | sslConfigTftpServer and sslConfigFileName must contain valid values. downloadCertificate - Use this link to download a copy of the currently installed c ertifi… |
| 1.3.6.1.4.1.2.3.51.3.3.4.2.4.6.3.4 | ScalarsslClientLDAPCertificateImport | read-write | mandatory | sslConfigTftpServer and sslConfigFileName must contain valid values. importSignedCertificate - Use this to import a signed certificate. To obtain a signed cert… |
| 1.3.6.1.4.1.2.3.51.3.3.4.2.4.6.3.5 | ScalarsslClientLDAPCertificateStatus | read-only | mandatory | Get the status of the installed SSL Client certificates. 1 = Private Key and Cert/CSR not available. 2 = Private Key and Self-signed cert installed. 3 = Privat… |
| 1.3.6.1.4.1.2.3.51.3.3.4.2.4.6.3.6 | ScalarsslClientLDAPCertificateExpirationDate | read-only | mandatory | Expiration date of the LDAP Client certificate. |
| 1.3.6.1.4.1.2.3.51.3.3.4.2.4.6.3.7 | ScalarsslClientLDAPCertificateRemove | write-only | mandatory | removeServerCertificate - Remove LDAP Client certificate. |
| 1.3.6.1.4.1.2.3.51.3.3.4.2.4.6.3.8 | ScalarsslClientLDAPTrustedCertificate1Status | read-only | mandatory | Get the status of the installed SSL Client trusted certificates. 0 = certificate not installed 1 = certificate installed. |
| 1.3.6.1.4.1.2.3.51.3.3.4.2.4.6.3.9 | ScalarsslClientLDAPTrustedCertificate1ExpirationDate | read-only | mandatory | Expiration date of the LDAP Client certificate. |
| 1.3.6.1.4.1.2.3.51.3.3.4.2.4.6.3.10 | ScalarsslClientLDAPTrustedCertificate1Remove | write-only | mandatory | removeServerCertificate - Remove LDAP Client certificate. |
| 1.3.6.1.4.1.2.3.51.3.3.4.2.4.6.3.11 | ScalarsslClientLDAPTrustedCertificate2Status | read-only | mandatory | Get the status of the installed SSL Client trusted certificates. 0 = certificate not installed 1 = certificate installed. |
| 1.3.6.1.4.1.2.3.51.3.3.4.2.4.6.3.12 | ScalarsslClientLDAPTrustedCertificate2ExpirationDate | read-only | mandatory | Expiration date of the LDAP Client certificate. |
| 1.3.6.1.4.1.2.3.51.3.3.4.2.4.6.3.13 | ScalarsslClientLDAPTrustedCertificate2Remove | write-only | mandatory | removeServerCertificate - Remove LDAP Client certificate. |
| 1.3.6.1.4.1.2.3.51.3.3.4.2.4.6.3.14 | ScalarsslClientLDAPTrustedCertificate3Status | read-only | mandatory | Get the status of the installed SSL Client trusted certificates. 0 = certificate not installed 1 = certificate installed. |
| 1.3.6.1.4.1.2.3.51.3.3.4.2.4.6.3.15 | ScalarsslClientLDAPTrustedCertificate3ExpirationDate | read-only | mandatory | Expiration date of the LDAP Client certificate. |
| 1.3.6.1.4.1.2.3.51.3.3.4.2.4.6.3.16 | ScalarsslClientLDAPTrustedCertificate3Remove | write-only | mandatory | removeServerCertificate - Remove LDAP Client certificate. |
| 1.3.6.1.4.1.2.3.51.3.3.4.2.4.6.3.17 | ScalarsslClientLDAPTrustedCertificate4Status | read-only | mandatory | Get the status of the installed SSL Client trusted certificates. 0 = certificate not installed 1 = certificate installed. |
| 1.3.6.1.4.1.2.3.51.3.3.4.2.4.6.3.18 | ScalarsslClientLDAPTrustedCertificate4ExpirationDate | read-only | mandatory | Expiration date of the LDAP Client certificate. |
| 1.3.6.1.4.1.2.3.51.3.3.4.2.4.6.3.19 | ScalarsslClientLDAPTrustedCertificate4Remove | write-only | mandatory | removeServerCertificate - Remove LDAP Client certificate. |
| 1.3.6.1.4.1.2.3.51.3.3.4.2.4.6.4 | ScalarsslConfigTftpServer | read-write | mandatory | To download or import certificates, set the IP address or host name of the TFTP server where the file should be transferred to or from. The address must be ent… |
| 1.3.6.1.4.1.2.3.51.3.3.4.2.4.6.5 | ScalarsslConfigFileName | read-write | mandatory | File name on target system for the downloaded or imported certificate. |
| 1.3.6.1.4.1.2.3.51.3.3.4.2.4.6.6 | NodesslCertificateData | |||
| 1.3.6.1.4.1.2.3.51.3.3.4.2.4.6.6.1 | ScalarsslCertificateDataCountry | read-write | mandatory | Required field for generating a CSR or self-signed certificate. Use this field to indicate the country where the IMM physically resides. This field must contai… |
| 1.3.6.1.4.1.2.3.51.3.3.4.2.4.6.6.2 | ScalarsslCertificateDataStateorProvince | read-write | mandatory | Required field for generating a CSR or self-signed certificate. Use this field to indicate the state or province where the IMM physically resides. This field m… |
| 1.3.6.1.4.1.2.3.51.3.3.4.2.4.6.6.3 | ScalarsslCertificateDataCityOrLocality | read-write | mandatory | Required field for generating a CSR or self-signed certificate. Use this field to indicate the city or locality where the IMM physically resides. This field ma… |
| 1.3.6.1.4.1.2.3.51.3.3.4.2.4.6.6.4 | ScalarsslCertificateDataOrganizationName | read-write | mandatory | Required field for generating a CSR or self-signed certificate. Use this field to indicate the company or organization that owns the IMM. When this is used to … |
| 1.3.6.1.4.1.2.3.51.3.3.4.2.4.6.6.5 | ScalarsslCertificateDataIMMHostName | read-write | mandatory | Required field for generating a CSR or self-signed certificate. Use this field to indicate the IMM host name that currently appears in the browser URL address … |
| 1.3.6.1.4.1.2.3.51.3.3.4.2.4.6.6.6 | ScalarsslCertificateDataContact | read-write | mandatory | Optional field for generating a CSR or self-signed certificate. Use this field to indicate the name of a contact person responsible for the IMM. This field may… |
| 1.3.6.1.4.1.2.3.51.3.3.4.2.4.6.6.7 | ScalarsslCertificateDataEmailAddr | read-write | mandatory | Optional field for generating a CSR or self-signed certificate. Use this field to indicate the email address of a contact person responsible for the IMM. This … |
| 1.3.6.1.4.1.2.3.51.3.3.4.2.4.6.6.8 | ScalarsslCertificateDataOrganizationUnit | read-write | mandatory | Optional field for generating a CSR or self-signed certificate. Use this field to indicate the unit within the company or organization that owns the IMM. This … |
| 1.3.6.1.4.1.2.3.51.3.3.4.2.4.6.6.9 | ScalarsslCertificateDataSurname | read-write | mandatory | Optional field for generating a CSR or self-signed certificate. Use this field for additional information, such as the surname of a person responsible for the … |
| 1.3.6.1.4.1.2.3.51.3.3.4.2.4.6.6.10 | ScalarsslCertificateDataGivenName | read-write | mandatory | Optional field for generating a CSR or self-signed certificate. Use this field for additional information, such as the given name of a person responsible for t… |
| 1.3.6.1.4.1.2.3.51.3.3.4.2.4.6.6.11 | ScalarsslCertificateDataInitials | read-write | mandatory | Optional field for generating a CSR or self-signed certificate. Use this field for additional information, such as the initials of a person responsible for the… |
| 1.3.6.1.4.1.2.3.51.3.3.4.2.4.6.6.12 | ScalarsslCertificateDataDNQualifier | read-write | mandatory | Optional field for generating a CSR or self-signed certificate. Use this field for additional information, such as a Distinguished Name Qualifier for the IMM. … |
| 1.3.6.1.4.1.2.3.51.3.3.4.2.4.6.6.13 | ScalarsslCertificateDataCSRChallengePassword | read-write | mandatory | Optional field for generating a CSR. Use this field to assign a password to the CSR. This field may contain a maximum of 30 characters. |
| 1.3.6.1.4.1.2.3.51.3.3.4.2.4.6.6.14 | ScalarsslCertificateDataCSRUnstructuredName | read-write | mandatory | Optional field for generating a CSR. Use this field for additional information, such as an unstructured name assigned to the IMM. This field may contain a maxi… |
| 1.3.6.1.4.1.2.3.51.3.3.4.2.4.6.6.15 | ScalarsslCertificateDataSubjectAltName1 | read-write | mandatory | Optional field to allow an SSL certificate to specify an additional name that the certificate should match. This field may contain a maximum of 60 characters. |
| 1.3.6.1.4.1.2.3.51.3.3.4.2.4.6.6.16 | ScalarsslCertificateDataSubjectAltName2 | read-write | mandatory | Optional field to allow an SSL certificate to specify an additional name that the certificate should match. This field may contain a maximum of 60 characters. |
| 1.3.6.1.4.1.2.3.51.3.3.4.2.4.6.6.17 | ScalarsslCertificateDataSubjectAltName3 | read-write | mandatory | Optional field to allow an SSL certificate to specify an additional name that the certificate should match. This field may contain a maximum of 60 characters. |
| 1.3.6.1.4.1.2.3.51.3.3.4.2.4.6.6.18 | ScalarsslCertificateDataSubjectAltName4 | read-write | mandatory | Optional field to allow an SSL certificate to specify an additional name that the certificate should match. This field may contain a maximum of 60 characters. |
| 1.3.6.1.4.1.2.3.51.3.3.4.2.4.6.6.19 | ScalarsslCertificateDataSubjectAltName5 | read-write | mandatory | Optional field to allow an SSL certificate to specify an additional name that the certificate should match. This field may contain a maximum of 60 characters. |
| 1.3.6.1.4.1.2.3.51.3.3.4.2.4.6.6.20 | ScalarsslCertificateDataSubjectAltName6 | read-write | mandatory | Optional field to allow an SSL certificate to specify an additional name that the certificate should match. This field may contain a maximum of 60 characters. |
| 1.3.6.1.4.1.2.3.51.3.3.4.2.4.6.6.21 | ScalarsslCertificateDataSubjectAltName7 | read-write | mandatory | Optional field to allow an SSL certificate to specify an additional name that the certificate should match. This field may contain a maximum of 60 characters. |
| 1.3.6.1.4.1.2.3.51.3.3.4.2.4.6.6.22 | ScalarsslCertificateDataSubjectAltName8 | read-write | mandatory | Optional field to allow an SSL certificate to specify an additional name that the certificate should match. This field may contain a maximum of 60 characters. |
| 1.3.6.1.4.1.2.3.51.3.3.4.2.4.6.7 | ScalarsslCertificateCSRDownloadFormat | read-write | mandatory | You can download the generated CSR in DER format or PEM format. If the CA asks you to copy the contents of the CSR file into a web browser window, PEM format i… |
| 1.3.6.1.4.1.2.3.51.3.3.4.2.4.7 | NodecryptoSettings | |||
| 1.3.6.1.4.1.2.3.51.3.3.4.2.4.7.1 | ScalarcryptoMode | read-write | mandatory | Basic or NIST mode enabled. The Basic mode is compatible with older firmware versions and with browers and other network clients that do not implement the stri… |
| 1.3.6.1.4.1.2.3.51.3.3.4.2.4.7.2 | ScalarcryptoSnmpv3 | read-write | mandatory | Disallow or allow SNMPv3 accounts that do not comply with NIST compliance mode when NIST compliance has been enabled. |
| 1.3.6.1.4.1.2.3.51.3.3.4.2.4.7.3 | NodecryptoInsufCompliance | |||
| 1.3.6.1.4.1.2.3.51.3.3.4.2.4.7.3.1 | TablecryptoInsufComplianceTable | not-accessible | mandatory | This table contains items not in compliance with the current cyrptoMode setting. |
| 1.3.6.1.4.1.2.3.51.3.3.4.2.4.7.3.1.1 | RowcryptoInsufComplianceEntry | not-accessible | mandatory | Each row contains an insufficient compliance item name. |
| 1.3.6.1.4.1.2.3.51.3.3.4.2.4.7.3.1.1.1 | ColumncryptoInsufComplianceItemIndex | read-only | mandatory | The index number of one insufficient compliance item entry. |
| 1.3.6.1.4.1.2.3.51.3.3.4.2.4.7.3.1.1.2 | ColumncryptoInsufComplianceItemName | read-only | mandatory | The name of one insufficient compliance item. |
| 1.3.6.1.4.1.2.3.51.3.3.4.2.4.8 | NodecertDomainNames | |||
| 1.3.6.1.4.1.2.3.51.3.3.4.2.4.8.1 | TablecertDomainNameTable | not-accessible | mandatory | This table contains certificate domain names and status. |
| 1.3.6.1.4.1.2.3.51.3.3.4.2.4.8.1.1 | RowcertDomainNameEntry | not-accessible | mandatory | Each row contains a certificate domain name and status. |
| 1.3.6.1.4.1.2.3.51.3.3.4.2.4.8.1.1.1 | ColumncertDomainNameIndex | read-only | mandatory | The index number of one certificate domain name entry. |
| 1.3.6.1.4.1.2.3.51.3.3.4.2.4.8.1.1.2 | ColumncertDomainName | read-only | mandatory | The Certificate Domain Name of one certificate domain name entry. |
| 1.3.6.1.4.1.2.3.51.3.3.4.2.4.8.1.1.3 | ColumncertDomainNameStatus | read-only | mandatory | The status of the Certificate Domain Name entry. |
| 1.3.6.1.4.1.2.3.51.3.3.4.2.4.8.2 | ScalaraddCertDomainName | read-write | mandatory | Add one Certificate Domain Name to the certificate domain name table. |
| 1.3.6.1.4.1.2.3.51.3.3.4.2.4.8.3 | ScalarrmCertDomainName | read-write | mandatory | Remove one Certificate Domain Name to the certificate domain name table. |
| 1.3.6.1.4.1.2.3.51.3.3.4.2.4.9 | NodeskrServers | |||
| 1.3.6.1.4.1.2.3.51.3.3.4.2.4.9.1 | TableskrServerTable | not-accessible | mandatory | This table contains Storage Key Repository Server hostnames and ports. |
| 1.3.6.1.4.1.2.3.51.3.3.4.2.4.9.1.1 | RowskrServerEntry | not-accessible | mandatory | Each row contains a Storage Key Repository Server hostname and port. |
| 1.3.6.1.4.1.2.3.51.3.3.4.2.4.9.1.1.1 | ColumnskrServerIndex | read-only | mandatory | The index number of one Storage Key Repository Server entry. |
| 1.3.6.1.4.1.2.3.51.3.3.4.2.4.9.1.1.2 | ColumnskrServerHostname | read-write | mandatory | Storage Key Repository Server hostname or IP address. |
| 1.3.6.1.4.1.2.3.51.3.3.4.2.4.9.1.1.3 | ColumnskrServerPort | read-write | mandatory | Storage Key Repository Server port number. |
| 1.3.6.1.4.1.2.3.51.3.3.4.2.4.9.2 | ScalarskrServerCertAction | write-only | mandatory | importServerCertificate - Import Storage Key Repository Server certificate. For tftp mode, skrConfigFtpServer and skrConfigFileName must contain valid values. … |
| 1.3.6.1.4.1.2.3.51.3.3.4.2.4.9.3 | ScalarskrDeviceGroup | read-write | mandatory | An optional NULL terminated 16 character string that contains the Device Group that the server drives belong to. |
| 1.3.6.1.4.1.2.3.51.3.3.4.2.4.9.4 | NodeskrClientConfigCertficate | |||
| 1.3.6.1.4.1.2.3.51.3.3.4.2.4.9.4.1 | ScalarskrClientCertificateGeneration | read-write | mandatory | Initiate the new key and certificate generation process for the key repository client. The required fields in skrCertificateData must be set to valid contents.… |
| 1.3.6.1.4.1.2.3.51.3.3.4.2.4.9.4.2 | ScalarskrClientCertificateTransfer | read-write | mandatory | For tftp mode, skrConfigFtpServer and skrConfigFileName must contain valid values. For sftp mode, skrConfigFTPCallUserID and skrConfigFtpCallPassword must also… |
| 1.3.6.1.4.1.2.3.51.3.3.4.2.4.9.4.3 | ScalarskrClientCertificateStatus | read-only | mandatory | Get the status of the installed Web certificates. 1 = Private Key and Cert/CSR not available. 2 = Private Key and Self-signed cert installed. 3 = Private Key a… |
| 1.3.6.1.4.1.2.3.51.3.3.4.2.4.9.4.4 | ScalarskrClientCertificateExpirationDate | read-only | mandatory | Expiration date of the SKR client certificate. |
| 1.3.6.1.4.1.2.3.51.3.3.4.2.4.9.4.5 | ScalarskrClientCertificateRemove | write-only | mandatory | removeServerCertificate - Remove SKR client certificate. |
| 1.3.6.1.4.1.2.3.51.3.3.4.2.4.9.5 | NodeskrCertificateData | |||
| 1.3.6.1.4.1.2.3.51.3.3.4.2.4.9.5.1 | ScalarskrCertificateDataCountry | read-write | mandatory | Required field for generating a CSR or self-signed certificate. Use this field to indicate the country where the IMM physically resides. This field must contai… |
| 1.3.6.1.4.1.2.3.51.3.3.4.2.4.9.5.2 | ScalarskrCertificateDataStateorProvince | read-write | mandatory | Required field for generating a CSR or self-signed certificate. Use this field to indicate the state or province where the IMM physically resides. This field m… |
| 1.3.6.1.4.1.2.3.51.3.3.4.2.4.9.5.3 | ScalarskrCertificateDataCityOrLocality | read-write | mandatory | Required field for generating a CSR or self-signed certificate. Use this field to indicate the city or locality where the IMM physically resides. This field ma… |
| 1.3.6.1.4.1.2.3.51.3.3.4.2.4.9.5.4 | ScalarskrCertificateDataOrganizationName | read-write | mandatory | Required field for generating a CSR or self-signed certificate. Use this field to indicate the company or organization that owns the IMM. When this is used to … |
| 1.3.6.1.4.1.2.3.51.3.3.4.2.4.9.5.5 | ScalarskrCertificateDataIMMHostName | read-write | mandatory | Required field for generating a CSR or self-signed certificate. Use this field to indicate the IMM host name that currently appears in the browser URL address … |
| 1.3.6.1.4.1.2.3.51.3.3.4.2.4.9.5.6 | ScalarskrCertificateDataContact | read-write | mandatory | Optional field for generating a CSR or self-signed certificate. Use this field to indicate the name of a contact person responsible for the IMM. This field may… |
| 1.3.6.1.4.1.2.3.51.3.3.4.2.4.9.5.7 | ScalarskrCertificateDataEmailAddr | read-write | mandatory | Optional field for generating a CSR or self-signed certificate. Use this field to indicate the email address of a contact person responsible for the IMM. This … |
| 1.3.6.1.4.1.2.3.51.3.3.4.2.4.9.5.8 | ScalarskrCertificateDataOrganizationUnit | read-write | mandatory | Optional field for generating a CSR or self-signed certificate. Use this field to indicate the unit within the company or organization that owns the IMM. This … |
| 1.3.6.1.4.1.2.3.51.3.3.4.2.4.9.5.9 | ScalarskrCertificateDataSurname | read-write | mandatory | Optional field for generating a CSR or self-signed certificate. Use this field for additional information, such as the surname of a person responsible for the … |
| 1.3.6.1.4.1.2.3.51.3.3.4.2.4.9.5.10 | ScalarskrCertificateDataGivenName | read-write | mandatory | Optional field for generating a CSR or self-signed certificate. Use this field for additional information, such as the given name of a person responsible for t… |
| 1.3.6.1.4.1.2.3.51.3.3.4.2.4.9.5.11 | ScalarskrCertificateDataInitials | read-write | mandatory | Optional field for generating a CSR or self-signed certificate. Use this field for additional information, such as the initials of a person responsible for the… |
| 1.3.6.1.4.1.2.3.51.3.3.4.2.4.9.5.12 | ScalarskrCertificateDataDNQualifier | read-write | mandatory | Optional field for generating a CSR or self-signed certificate. Use this field for additional information, such as a Distinguished Name Qualifier for the IMM. … |
| 1.3.6.1.4.1.2.3.51.3.3.4.2.4.9.5.13 | ScalarskrCertificateDataCSRChallengePassword | read-write | mandatory | Optional field for generating a CSR. Use this field to assign a password to the CSR. This field may contain a maximum of 30 characters. |
| 1.3.6.1.4.1.2.3.51.3.3.4.2.4.9.5.14 | ScalarskrCertificateDataCSRUnstructuredName | read-write | mandatory | Optional field for generating a CSR. Use this field for additional information, such as an unstructured name assigned to the IMM. This field may contain a maxi… |
| 1.3.6.1.4.1.2.3.51.3.3.4.2.4.9.6 | ScalarskrConfigFtpServer | read-write | mandatory | To import certificates, set the IP address or host name of the server where the file should be transferred from. The address must be entered in a dotted decima… |
| 1.3.6.1.4.1.2.3.51.3.3.4.2.4.9.7 | ScalarskrConfigFtpServerMode | read-write | mandatory | This field specifies the FTP mode used. |
| 1.3.6.1.4.1.2.3.51.3.3.4.2.4.9.8 | ScalarskrConfigFtpCallPort | read-write | mandatory | This field specifies the port on remote TFTP/SFTP server for data transmission (default values are 69/22, respectively). |
| 1.3.6.1.4.1.2.3.51.3.3.4.2.4.9.9 | ScalarskrConfigFTPCallUserID | read-write | mandatory | This field specifies the user account to login remote SFTP server. |
| 1.3.6.1.4.1.2.3.51.3.3.4.2.4.9.10 | ScalarskrConfigFtpCallPassword | read-write | mandatory | This field specifies the password to login remote SFTP server. |
| 1.3.6.1.4.1.2.3.51.3.3.4.2.4.9.11 | ScalarskrConfigFileName | read-write | mandatory | File name on target system for the imported certificate. |
| 1.3.6.1.4.1.2.3.51.3.3.4.2.4.9.12 | ScalarskrServerCertificateExpirationDate | read-only | mandatory | Expiration date of the SKR Server certificate. |
| 1.3.6.1.4.1.2.3.51.3.3.4.2.5 | NodetcpPortAssignmentCfg | |||
| 1.3.6.1.4.1.2.3.51.3.3.4.2.5.1 | ScalartcpPortsRestoreDefault | write-only | mandatory | Reset all the ports to the factory defaults. |
| 1.3.6.1.4.1.2.3.51.3.3.4.2.5.2 | ScalarhttpPortAssignment | read-write | mandatory | HTTP port number. Default value is 80. Once changed, the url's have to include :port at the end. |
| 1.3.6.1.4.1.2.3.51.3.3.4.2.5.3 | ScalarhttpsPortAssignment | read-write | mandatory | SSL port number. Default value is 443. Once changed, the url's have to include :port at the end. |
| 1.3.6.1.4.1.2.3.51.3.3.4.2.5.4 | ScalartelnetLegacyCLIPortAssignment | read-write | mandatory | telnet port number. Default value is 23. |
| 1.3.6.1.4.1.2.3.51.3.3.4.2.5.6 | ScalarsshLegacyCLIPortAssignment | read-write | mandatory | SSH port number. Default value is 22. |
| 1.3.6.1.4.1.2.3.51.3.3.4.2.5.8 | ScalarsnmpAgentPortAssignment | read-write | mandatory | SNMP Agent port number. Default value is 161. |
| 1.3.6.1.4.1.2.3.51.3.3.4.2.5.9 | ScalarsnmpTrapsPortAssignment | read-write | mandatory | SNMP Traps port number. Default value is 162. |
| 1.3.6.1.4.1.2.3.51.3.3.4.2.5.10 | ScalarremvidPortAssignment | read-write | mandatory | Remote Console port number. Default value is 3900. |
| 1.3.6.1.4.1.2.3.51.3.3.4.2.5.11 | ScalaribmSystemDirectorHttpPortAssignment | read-write | mandatory | IBM Systems Director Http port number. |
| 1.3.6.1.4.1.2.3.51.3.3.4.2.5.12 | ScalaribmSystemDirectorHttpsPortAssignment | read-write | mandatory | IBM Systems Director Https port number. |
| 1.3.6.1.4.1.2.3.51.3.3.4.2.6 | NodeldapClientCfg | |||
| 1.3.6.1.4.1.2.3.51.3.3.4.2.6.1 | ScalarldapServer1NameOrIPAddress | read-write | mandatory | A NULL terminated 64 byte string that contains the LDAP server host name or IP address (a.b.c.d). |
| 1.3.6.1.4.1.2.3.51.3.3.4.2.6.2 | ScalarldapServer1PortNumber | read-write | mandatory | LDAP server port number. |
| 1.3.6.1.4.1.2.3.51.3.3.4.2.6.3 | ScalarldapServer2NameOrIPAddress | read-write | mandatory | A NULL terminated 64 byte string that contains the LDAP server host name or IP address (a.b.c.d). |
| 1.3.6.1.4.1.2.3.51.3.3.4.2.6.4 | ScalarldapServer2PortNumber | read-write | mandatory | LDAP server port number. |
| 1.3.6.1.4.1.2.3.51.3.3.4.2.6.5 | ScalarldapServer3NameOrIPAddress | read-write | mandatory | A NULL terminated 64 byte string that contains the LDAP server host name or IP address (a.b.c.d). |
| 1.3.6.1.4.1.2.3.51.3.3.4.2.6.6 | ScalarldapServer3PortNumber | read-write | mandatory | LDAP server port number. |
| 1.3.6.1.4.1.2.3.51.3.3.4.2.6.7 | ScalarldapServer4NameOrIPAddress | read-write | mandatory | A NULL terminated 64 byte string that contains the LDAP server host name or IP address (a.b.c.d). |
| 1.3.6.1.4.1.2.3.51.3.3.4.2.6.8 | ScalarldapServer4PortNumber | read-write | mandatory | LDAP server port number. |
| 1.3.6.1.4.1.2.3.51.3.3.4.2.6.9 | ScalarldapRootDN | read-write | mandatory | Distinguished Name for root entry of directory tree. An example might look like dn=foobar,dn=com. |
| 1.3.6.1.4.1.2.3.51.3.3.4.2.6.10 | ScalarldapUserSearchBaseDN | read-write | deprecated | As part of the user authentication process, it is necessary to search the LDAP server for one or more attributes associated with a particular user. Any search … |
| 1.3.6.1.4.1.2.3.51.3.3.4.2.6.11 | ScalarldapGroupFilter | read-write | mandatory | This filter is used for group authentication. It specifies what group or groups that this MM belongs to. If left blank, group authentication is disabled. Other… |
| 1.3.6.1.4.1.2.3.51.3.3.4.2.6.12 | ScalarldapBindingMethod | read-write | mandatory | On initial binds to the LDAP server during user authentication, there are three options: Anonymous authentication: Bind attempt is made without a client DN or … |
| 1.3.6.1.4.1.2.3.51.3.3.4.2.6.13 | ScalarldapClientAuthenticationDN | read-write | mandatory | The initial bind to the LDAP server during user authentication can be performed with anonymous authentication, client based authentication, or UPN. The client … |
| 1.3.6.1.4.1.2.3.51.3.3.4.2.6.14 | ScalarldapClientAuthenticationPassword | read-write | mandatory | The client authentication password |
| 1.3.6.1.4.1.2.3.51.3.3.4.2.6.15 | ScalarldapRoleBasedSecurityEnabled | read-write | mandatory | A value of true for RoleBasedSecurityEnabled indicates enhanced will be used by the service processor. A value of false for RoleBasedSecurityEnabled indicates … |
| 1.3.6.1.4.1.2.3.51.3.3.4.2.6.16 | ScalarldapServerTargetName | read-write | mandatory | When administrator chooses Enhanced Role Based Security authentication model, he can associate one IMM with one managed target object in Snap-in (one tool to c… |
| 1.3.6.1.4.1.2.3.51.3.3.4.2.6.17 | ScalarldapUIDsearchAttribute | read-write | mandatory | When the binding method selected is Anonymous authentication or Client authentication, the initial bind to the LDAP server is followed by a search request aime… |
| 1.3.6.1.4.1.2.3.51.3.3.4.2.6.18 | ScalarldapGroupSearchAttribute | read-write | mandatory | When the MM Group Filter name is configured, it is necessary to retrieve from the LDAP server the list of groups that a particular user belongs to. This is req… |
| 1.3.6.1.4.1.2.3.51.3.3.4.2.6.19 | ScalarldapLoginPermissionAttribute | read-write | mandatory | When a user successfully authenticates via a LDAP server, it is necessary to retrieve the login permissions for this user. In order to retrieve these permissio… |
| 1.3.6.1.4.1.2.3.51.3.3.4.2.6.20 | ScalarldapUseDNSOrPreConfiguredServers | read-write | mandatory | The MM contains a Version 2.0 LDAP Client that may be configured to provide user authentication through one or more LDAP servers. The LDAP server(s) to be used… |
| 1.3.6.1.4.1.2.3.51.3.3.4.2.6.21 | ScalarldapDomainSource | read-write | mandatory | The DNS SRV request sent to the DNS server must specify a domain name. The LDAP client will determine where to get this domain name based on one of the followi… |
| 1.3.6.1.4.1.2.3.51.3.3.4.2.6.22 | ScalarldapForestName | read-write | mandatory | In order to discover Global Catalogs (GC), the forest name must be configured in the ForestName property. The Global Catalogs are required for users who belong… |
| 1.3.6.1.4.1.2.3.51.3.3.4.2.6.23 | ScalarldapAuthCfg | read-write | mandatory | If ldapAuthCfg is set to 0, LDAP server is used to authenticate and authorize users. If it is set to 1, LDAP server is only used to authenticate users. Note:LD… |
| 1.3.6.1.4.1.2.3.51.3.3.4.2.6.24 | ScalarldapSearchDomain | read-write | mandatory | This parameter may be used as the domain name in the DNS SRV request, depending on how the Domain Source parameter is configured. |
| 1.3.6.1.4.1.2.3.51.3.3.4.2.6.25 | ScalarldapServiceName | read-write | mandatory | The DNS SRV request sent to the DNS server must also specify a service name. The configured value will be used for this purpose. If left blank, the default val… |
| 1.3.6.1.4.1.2.3.51.3.3.4.2.8 | NodentpConfig | |||
| 1.3.6.1.4.1.2.3.51.3.3.4.2.8.1 | ScalarntpEnable | read-write | mandatory | Disable/Enable the NTP client. The client will update the IMM system clock at the frequency specified. |
| 1.3.6.1.4.1.2.3.51.3.3.4.2.8.2 | ScalarntpIpAddressHostname1 | read-write | mandatory | First NTP server's IP address or hostname if DNS is enabled and configured. |
| 1.3.6.1.4.1.2.3.51.3.3.4.2.8.3 | ScalarntpUpdateFrequency | read-write | mandatory | The frequency in minutes that the NTP service runs. The value range is 3 to 1440. |
| 1.3.6.1.4.1.2.3.51.3.3.4.2.8.4 | ScalarntpIpAddressHostname2 | read-write | mandatory | Second NTP server's IP address or hostname if DNS is enabled and configured. |
| 1.3.6.1.4.1.2.3.51.3.3.4.2.8.5 | ScalarntpUpdateClock | write-only | mandatory | Update the IMM system clock with the specified NTP server. A valid NTP server must be configured first. |
| 1.3.6.1.4.1.2.3.51.3.3.4.2.8.6 | ScalarntpIpAddressHostname3 | read-write | mandatory | Third NTP server's IP address or hostname if DNS is enabled and configured. |
| 1.3.6.1.4.1.2.3.51.3.3.4.2.8.7 | ScalarntpIpAddressHostname4 | read-write | mandatory | Fourth NTP server's IP address or hostname if DNS is enabled and configured. |
| 1.3.6.1.4.1.2.3.51.3.3.4.2.10 | NodeipmiConfig | |||
| 1.3.6.1.4.1.2.3.51.3.3.4.2.10.1 | ScalaripmiEnable | read-write | mandatory | Disable/Enable IPMI |
| 1.3.6.1.4.1.2.3.51.3.3.5 | NodeconfigurationManagement | |||
| 1.3.6.1.4.1.2.3.51.3.3.5.1 | ScalarconfigurationManagementTftpServer | read-write | mandatory | To save or restore the system configuration, set the IP address or host name of the TFTP server where the file should be transferred to or from. The address mu… |
| 1.3.6.1.4.1.2.3.51.3.3.5.2 | ScalarconfigurationManagementFileName | read-write | mandatory | File name of the saved file or restore-from file. |
| 1.3.6.1.4.1.2.3.51.3.3.5.3 | ScalarconfigurationManagementSaveStart | read-write | mandatory | Start saving the configuration file to the specified target file and system. Using execute will cause the SNMP client to wait for the save operation to complet… |
| 1.3.6.1.4.1.2.3.51.3.3.5.4 | ScalarconfigurationManagementRestoreStart | read-write | mandatory | Start restoring the configuration file from the specified target file and system. Using execute will cause the SNMP client to wait for the restore operation to… |
| 1.3.6.1.4.1.2.3.51.3.3.5.5 | ScalarconfigurationManagementStatus | read-only | mandatory | Get the status of the last configurationManagement operation which was initiated through SNMP method. |
| 1.3.6.1.4.1.2.3.51.3.3.7 | ScalarimmVersionCheck | read-only | mandatory | Get the IMM version type. |
| 1.3.6.1.4.1.2.3.51.3.4 | NodegeneralSystemSettings | |||
| 1.3.6.1.4.1.2.3.51.3.4.1 | NodeserverTimers | |||
| 1.3.6.1.4.1.2.3.51.3.4.1.1 | ScalaroSHang | read-write | mandatory | Number, in 1 second intervals, the IMM will check to insure the OS is operating properly. If the operating system fails to respond within 6 seconds to one of t… |
| 1.3.6.1.4.1.2.3.51.3.4.1.2 | ScalaroSLoader | read-write | mandatory | Number in 30 second intervals the remote IMM will wait between completion of POST and the end of loading the OS. If this interval is exceeded, the IMM will gen… |
| 1.3.6.1.4.1.2.3.51.3.4.2 | ScalarnetworkPXEboot | read-write | mandatory | Modify the system's boot sequence for the next system restart in order to attempt a PXE/DHCP network boot. The system's boot sequence(set via the BIOS settings… |
| 1.3.6.1.4.1.2.3.51.3.5 | NodesystemPower | |||
| 1.3.6.1.4.1.2.3.51.3.5.1 | NodepowerStatistics | |||
| 1.3.6.1.4.1.2.3.51.3.5.1.1 | ScalarcurrentSysPowerStatus | read-only | mandatory | Indicates if the system is currently powered on, off, or in sleep state. |
| 1.3.6.1.4.1.2.3.51.3.5.1.2 | ScalarpowerOnHours | read-only | mandatory | Number of hours the system has been powered on. |
| 1.3.6.1.4.1.2.3.51.3.5.1.3 | ScalarrestartCount | read-only | mandatory | Number of times the system has been restarted. |
| 1.3.6.1.4.1.2.3.51.3.5.1.4 | ScalarsystemState | read-only | mandatory | Shows the current operational state of the system. |
| 1.3.6.1.4.1.2.3.51.3.5.2 | NodepowerSysConfig | |||
| 1.3.6.1.4.1.2.3.51.3.5.2.1 | ScalarpowerSysOffDelay | read-write | mandatory | The number of 1 second interval the IMM will wait before powering off the system. |
| 1.3.6.1.4.1.2.3.51.3.5.2.2 | ScalarpowerSysOnClockSetting | read-write | mandatory | The clock setting used to determine when the IMM will power on the system. The examples and the format follow: (1)For example to set the value so the system wi… |
| 1.3.6.1.4.1.2.3.51.3.5.3 | NodepowerOffSystemControl | |||
| 1.3.6.1.4.1.2.3.51.3.5.3.1 | ScalarpowerOffWithOsShutdown | write-only | mandatory | Power off the system after performing a OS shutdown. |
| 1.3.6.1.4.1.2.3.51.3.5.3.2 | ScalarpowerOffImmediately | write-only | mandatory | Power off the system immediately. |
| 1.3.6.1.4.1.2.3.51.3.5.4 | NodepowerOnSystemControl | |||
| 1.3.6.1.4.1.2.3.51.3.5.4.2 | ScalarpowerOnImmediately | write-only | mandatory | Power on the system immediately. |
| 1.3.6.1.4.1.2.3.51.3.5.5 | NodepowerCyclingSchedule | |||
| 1.3.6.1.4.1.2.3.51.3.5.5.1 | ScalarschedulePowerOffWithOsShutdown | read-write | mandatory | Power Off the system after performing a OS shutdown at specified time and day of the week. Example: Monday,09:00 field contents range _____ ________ _____ 1 da… |
| 1.3.6.1.4.1.2.3.51.3.5.5.2 | ScalarschedulePowerOnSystem | read-write | mandatory | Power On the system at specified time and day of the week. Example: Monday,09:00 field contents range _____ ________ _____ 1 day EveryDay,Sunday,Monday,Tuesday… |
| 1.3.6.1.4.1.2.3.51.3.5.6 | NodepowerControlSleep | |||
| 1.3.6.1.4.1.2.3.51.3.5.6.1 | ScalarpowerEnterSleep | write-only | mandatory | Set system to enter power sleep state. The power sleep control actions will not work if the Sleep function is not enabled. |
| 1.3.6.1.4.1.2.3.51.3.5.6.2 | ScalarpowerExitSleep | write-only | mandatory | Set system to exit power sleep state. The power sleep control actions will not work if the Sleep function is not enabled. |
| 1.3.6.1.4.1.2.3.51.3.5.7 | NodepowerRestorePolicyControl | |||
| 1.3.6.1.4.1.2.3.51.3.5.7.1 | ScalarpowerRestorePolicy | read-write | mandatory | Power Restore Policy determines the mode of operation if a power loss occurs. This setting can also be configured via BIOS F1 setup. alwaysoff: System will rem… |
| 1.3.6.1.4.1.2.3.51.3.5.7.2 | ScalarpowerRestoreDelay | read-write | mandatory | Power Restore Delay is executed when power restore policy is set to alwayson or restore (if the previous state was power-on). disabled: Power on the server wit… |
| 1.3.6.1.4.1.2.3.51.3.6 | NoderestartReset | |||
| 1.3.6.1.4.1.2.3.51.3.6.1 | ScalarshutdownOsThenRestart | write-only | mandatory | Shutdown the OS and then restart the system and boot the OS. |
| 1.3.6.1.4.1.2.3.51.3.6.2 | ScalarrestartSystemImmediately | write-only | mandatory | Restart the system immediately and then the boot OS. |
| 1.3.6.1.4.1.2.3.51.3.6.3 | ScalarrestartSPImmediately | write-only | mandatory | Restart the IMM immediately. |
| 1.3.6.1.4.1.2.3.51.3.6.4 | ScalarresetSPConfigAndRestart | write-only | mandatory | Will cause all the IMM information to be reset to it's initial factory defaults(all previous configuration information is lost) and the IMM will be re-started. |
| 1.3.6.1.4.1.2.3.51.3.6.5 | ScalarscheduleShutdownOsThenRestart | read-write | mandatory | Shutdown the OS and then restart the system and boot the OS at specified Time and Day of the week. Example: Monday,09:00 field contents range _____ ________ __… |
| 1.3.6.1.4.1.2.3.51.3.6.6 | ScalarresetPowerSchedules | write-only | mandatory | reset all power schedules. schedulePowerOnSystem,schedulePowerOffWithOsShutdown, scheduleShutdownOsThenRestart. This does not reset powerSysOnClockSetting |
| 1.3.6.1.4.1.2.3.51.3.6.7 | ScalarbootServerF1Setup | write-only | mandatory | Boot the server to UEFI F1 Setup. If the server is powered on when the action is initiated, the server will be powered off with an OS shutdown, then powered ba… |
| 1.3.6.1.4.1.2.3.51.3.7 | NodefirmwareUpdate | |||
| 1.3.6.1.4.1.2.3.51.3.7.1 | ScalarfirmwareUpdateTarget | read-write | mandatory | Target module whose firmware will be updated. |
| 1.3.6.1.4.1.2.3.51.3.7.2 | ScalarfirmwareUpdateTftpServer | read-write | mandatory | IP address of the TFTP server where the firmware file resides. The address must be entered in a dotted decimal IP string (eg. 9.37.44.2). |
| 1.3.6.1.4.1.2.3.51.3.7.3 | ScalarfirmwareUpdateFileName | read-write | mandatory | File name of the firmware file. |
| 1.3.6.1.4.1.2.3.51.3.7.4 | ScalarfirmwareUpdateStart | write-only | mandatory | Start updating the firmware of the specified IMM Card. Note 1: The firmware update might take up to several minutes to complete. Do not reset the IMM Card unti… |
| 1.3.6.1.4.1.2.3.51.3.7.5 | ScalarfirmwareUpdateStatus | read-only | mandatory | Get the status of the last firmware update which was initiated through SNMP method. |
| 1.3.6.1.4.1.2.3.51.3.8 | NodeserviceAdvisor | |||
| 1.3.6.1.4.1.2.3.51.3.8.1 | NodeautoCallHomeSetup | |||
| 1.3.6.1.4.1.2.3.51.3.8.1.1 | ScalaracceptLicenseAgreement | read-write | mandatory | Accept Terms and Conditions of Service Advisor. The user will have to accept the terms and conditions before Service Advisor can send diagnostic data to suppor… |
| 1.3.6.1.4.1.2.3.51.3.8.1.2 | ScalarserviceAdvisorEnable | read-write | mandatory | Disable/Enable Call Home Support. The User Agreement must be accepted and the contact information must be set before the Call Home Support function of Service … |
| 1.3.6.1.4.1.2.3.51.3.8.2 | NodeserviceSupportCenter | |||
| 1.3.6.1.4.1.2.3.51.3.8.2.1 | ScalaribmSupportCenter | read-write | mandatory | The country code for the Support Center. 2 character ISO country code. |
| 1.3.6.1.4.1.2.3.51.3.8.3 | NodecontactInformation | |||
| 1.3.6.1.4.1.2.3.51.3.8.3.1 | ScalarcompanyName | read-write | mandatory | The organization/company name of the contact person. 1-30 characters. |
| 1.3.6.1.4.1.2.3.51.3.8.3.2 | ScalarcontactName | read-write | mandatory | The name of the contact person.1-30 characters. |
| 1.3.6.1.4.1.2.3.51.3.8.3.3 | ScalarphoneNumber | read-write | mandatory | The phone of the contact person. 5-30 characters. |
| 1.3.6.1.4.1.2.3.51.3.8.3.4 | ScalaremailAddress | read-write | mandatory | The email of the contact person. It must contain '@' and dot '.' in form userid@hostname (30 characters maximum). The userid can be alphanumeric characters, '.… |
| 1.3.6.1.4.1.2.3.51.3.8.3.5 | Scalaraddress | read-write | mandatory | The address of the machine location. The information in this field should be of sufficient detail to allow someone to quickly find the chassis when necessary. … |
| 1.3.6.1.4.1.2.3.51.3.8.3.6 | Scalarcity | read-write | mandatory | The city of the machine location. 1-30 characters. |
| 1.3.6.1.4.1.2.3.51.3.8.3.7 | Scalarstate | read-write | mandatory | The state of the machine location. 2-3 characters. |
| 1.3.6.1.4.1.2.3.51.3.8.3.8 | ScalarpostalCode | read-write | mandatory | The postal code of the location for this system. 1-9 characters, only alphanumeric characters are valid. |
| 1.3.6.1.4.1.2.3.51.3.8.3.9 | ScalarphoneExtension | read-write | mandatory | The phone extension of the contact person. 30 characters maximum. |
| 1.3.6.1.4.1.2.3.51.3.8.3.10 | ScalaraltContactName | read-write | mandatory | The name of the alternate contact person. 1-30 characters. |
| 1.3.6.1.4.1.2.3.51.3.8.3.11 | ScalaraltPhoneNumber | read-write | mandatory | The phone of the alternate contact person. 5-30 characters. |
| 1.3.6.1.4.1.2.3.51.3.8.3.12 | ScalaraltPhoneExtension | read-write | mandatory | The phone extension of the alternate contact person. 30 characters maximum. |
| 1.3.6.1.4.1.2.3.51.3.8.3.13 | ScalaraltEmailAddress | read-write | mandatory | The email of the alternate contact person. It must contain '@' and dot '.' in form userid@hostname (30 characters maximum). The userid can be alphanumeric char… |
| 1.3.6.1.4.1.2.3.51.3.8.3.14 | ScalarmachineLocationPhoneNumber | read-write | mandatory | The phone of the physical location where the compuer system resides. 5-30 characters. |
| 1.3.6.1.4.1.2.3.51.3.8.4 | NodehttpProxyConfig | |||
| 1.3.6.1.4.1.2.3.51.3.8.4.1 | ScalarhttpProxyEnable | read-write | mandatory | Disable/Enable of the HTTP Proxy. Select Enable to use the proxy for call home connections from the IMM to the Service Center. HTTP Proxy is used by the IMM wh… |
| 1.3.6.1.4.1.2.3.51.3.8.4.2 | ScalarhttpProxyLocation | read-write | mandatory | Fully qualified host name or IP address of the HTTP Proxy. Maximum of 63 characters. |
| 1.3.6.1.4.1.2.3.51.3.8.4.3 | ScalarhttpProxyPort | read-write | mandatory | The port number of the HTTP Proxy. An integer value from 1 to 65535. |
| 1.3.6.1.4.1.2.3.51.3.8.4.4 | ScalarhttpProxyUserName | read-write | mandatory | User Name of the HTTP Proxy. A maximum of 30 characters string without spaces. |
| 1.3.6.1.4.1.2.3.51.3.8.4.5 | ScalarhttpProxyPassword | read-write | mandatory | Password of the HTTP Proxy. A maximum of 15 characters string without spaces. |
| 1.3.6.1.4.1.2.3.51.3.8.5 | NodeactivityLogs | |||
| 1.3.6.1.4.1.2.3.51.3.8.5.1 | TableactivityLogTable | not-accessible | mandatory | Table of Service Advisor Activity Log entries information. This table displays events that were generated by the system or user that are called home. The entri… |
| 1.3.6.1.4.1.2.3.51.3.8.5.1.1 | RowactivityLogEntry | not-accessible | mandatory | Activity Log table entry. Each entry has the result of the call-home attempt, the service number assigned for the issue by the Support Center, the event ID, ev… |
| 1.3.6.1.4.1.2.3.51.3.8.5.1.1.1 | ColumnactivityLogIndex | read-only | mandatory | The Activity Log index number. For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.3.8.5.1.1.2 | ColumnactivityLogString | read-only | mandatory | A string of data detailing one Activity Log entry. The text message is from the original entry in the event log. For consistent results, view as a table and no… |
| 1.3.6.1.4.1.2.3.51.3.8.5.1.1.3 | ColumnactivityLogAcknowledge | read-write | mandatory | The acknowledgement of one Activity Log entry as corrected. This field allows the users to set a reminder next to certain events to indicate their awareness of… |
| 1.3.6.1.4.1.2.3.51.3.8.5.1.1.4 | ColumnactivityLogAttribute | read-only | mandatory | A string of data detailing one Activity Log entry's attribute. It contains states of both calling the Support Center and FTP/TFTP Server. A PENDING indicates t… |
| 1.3.6.1.4.1.2.3.51.3.8.6 | NodeautoFTPSetup | |||
| 1.3.6.1.4.1.2.3.51.3.8.6.1 | ScalarautoFTPCallMode | read-write | mandatory | This field specifies the automated problem reporting mode. Automated problem reporting mode allows the IMM to automatically put service data to a specified ser… |
| 1.3.6.1.4.1.2.3.51.3.8.6.2 | ScalarautoFTPCallAddr | read-write | mandatory | This field specifies the remote server address of FTP and TFTP. It should be fully qualified hostname or IP address. |
| 1.3.6.1.4.1.2.3.51.3.8.6.3 | ScalarautoFTPCallPort | read-write | mandatory | This field specifies the port on remote FTP/TFTP server for data transmission. |
| 1.3.6.1.4.1.2.3.51.3.8.6.4 | ScalarautoFTPCallUserID | read-write | mandatory | This field specifies the user account to login remote FTP server. |
| 1.3.6.1.4.1.2.3.51.3.8.6.5 | ScalarautoFTPCallPassword | read-write | mandatory | This field specifies the password to login remote FTP server. |
| 1.3.6.1.4.1.2.3.51.3.8.7 | NodecallHomeExclusionEvents | |||
| 1.3.6.1.4.1.2.3.51.3.8.7.1 | TablereadCallHomeExclusionEventTable | not-accessible | mandatory | Table of Call Home Exclusion Event entries information. |
| 1.3.6.1.4.1.2.3.51.3.8.7.1.1 | RowreadCallHomeExclusionEventEntry | not-accessible | mandatory | Call Home Exclusion Event table entry |
| 1.3.6.1.4.1.2.3.51.3.8.7.1.1.1 | ColumnreadCallHomeExclusionEventIndex | read-only | mandatory | The index number of one Call Home Exclusion Event. For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.3.8.7.1.1.2 | ColumnreadCallHomeExclusionEventID | read-only | mandatory | The Event ID of one Call Home Exclusion Event entry. For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.3.8.7.2 | ScalaraddCallHomeExclusionEvent | read-write | mandatory | Add one call home Event ID into the Call Home Exclusion List. The Event ID is an 16-digit hexadecimal number (0-F) with an optional prefix of '0x' or '0X'. The… |
| 1.3.6.1.4.1.2.3.51.3.8.7.3 | ScalarrmCallHomeExclusionEvent | read-write | mandatory | Remove one call home Event ID from the Call Home Exclusion List. The Event ID is an 16-digit hexadecimal number (0-F) with an optional prefix of '0x' or '0X'. … |
| 1.3.6.1.4.1.2.3.51.3.8.7.4 | ScalarrmAllCallHomeExclusionEvent | read-write | mandatory | Remove all Event IDs from the Call Home Exclusion List. If Service Advisor Terms and Conditions are accepted, events on the exclusion list can be removed. NOTE… |
| 1.3.6.1.4.1.2.3.51.3.8.8 | NodetestCallHome | |||
| 1.3.6.1.4.1.2.3.51.3.8.8.1 | ScalargenerateTestCallHome | write-only | mandatory | Generate a Test Call Home. |
| 1.3.6.1.4.1.2.3.51.3.9 | Nodescaling | |||
| 1.3.6.1.4.1.2.3.51.3.9.1 | NodescalableComplex | |||
| 1.3.6.1.4.1.2.3.51.3.9.1.1 | ScalarscalableComplexIdentifier | read-only | mandatory | The unique numeric identifier for a complex. |
| 1.3.6.1.4.1.2.3.51.3.9.1.2 | ScalarscalableComplexNumPartitions | read-only | mandatory | The number of partitions currently defined for this complex. |
| 1.3.6.1.4.1.2.3.51.3.9.1.3 | ScalarscalableComplexNumNodes | read-only | mandatory | The number of nodes existing in this complex, regardless of their assignment to any given partition. For ITEs or blabde, the physical slot location of the node… |
| 1.3.6.1.4.1.2.3.51.3.9.1.4 | ScalarscalableComplexClear | write-only | mandatory | This clears all partition information related to the complex. Any nodes associated with the complex are no longer assigned to any partitions. All nodes in the … |
| 1.3.6.1.4.1.2.3.51.3.9.2 | NodescalableComplexPartition | |||
| 1.3.6.1.4.1.2.3.51.3.9.2.1 | TablescalableComplexPartitionTable | not-accessible | mandatory | Table of scalable complex partition information. |
| 1.3.6.1.4.1.2.3.51.3.9.2.1.1 | RowscalableComplexPartitionEntry | not-accessible | mandatory | Scalable complex partition information. |
| 1.3.6.1.4.1.2.3.51.3.9.2.1.1.1 | ColumnscalableComplexPartitionIdentifier | read-only | mandatory | The unique numeric identifier for a partition defined within a complex installed in the chassis. |
| 1.3.6.1.4.1.2.3.51.3.9.2.1.1.2 | ColumnscalableComplexPartitionMode | read-write | mandatory | The currently configured mode of this partition. It is recommended that a partition be powered off prior to modification of the mode. In addition, switching a … |
| 1.3.6.1.4.1.2.3.51.3.9.2.1.1.3 | ColumnscalableComplexPartitionPriNodeKey | read-only | mandatory | The Node Key for the primary node in the partition. The Node Key is used to select partition for some actions that affect all nodes in the partition. |
| 1.3.6.1.4.1.2.3.51.3.9.2.1.1.4 | ColumnscalableComplexPartitionNumNodes | read-only | mandatory | The number of nodes currently defined for this partition. |
| 1.3.6.1.4.1.2.3.51.3.9.2.1.1.5 | ColumnscalableComplexPartitionStatus | read-only | mandatory | The current power status of this partition when the partition has a valid partition configuration. However, in the event the partition reports a partition cons… |
| 1.3.6.1.4.1.2.3.51.3.9.2.2 | ScalarscalableComplexPartitionSelect | write-only | mandatory | This Node Key of Primary node of the partition is used to select the partition for which a specific action will be taken |
| 1.3.6.1.4.1.2.3.51.3.9.2.3 | ScalarscalableComplexPartitionAction | write-only | mandatory | This object allows various actions to be taken in relation to a particular partition in a given complex. delete(1) - Deletes the partition from the complex. Al… |
| 1.3.6.1.4.1.2.3.51.3.9.3 | NodescalableComplexPartitionCreate | |||
| 1.3.6.1.4.1.2.3.51.3.9.3.1 | TablescalableComplexPartitionCreateTable | not-accessible | mandatory | Table used to identify the nodes to be used in create of a partition. The nodes are identified by Node key. The first node listed will be the primary node. |
| 1.3.6.1.4.1.2.3.51.3.9.3.1.1 | RowscalableComplexPartitionCreateEntry | not-accessible | mandatory | Node information for partition creation. |
| 1.3.6.1.4.1.2.3.51.3.9.3.1.1.1 | ColumnscalableComplexPartitionCreateIndex | read-only | mandatory | The table index. |
| 1.3.6.1.4.1.2.3.51.3.9.3.1.1.2 | ColumnscalableComplexPartitionCreateNodeKey | read-write | mandatory | The Node Key for a node included in the partition to be created. The first Node Key in the table is used will be the primary node in the partition to be create… |
| 1.3.6.1.4.1.2.3.51.3.9.3.2 | ScalarscalableComplexPartitionActionCreate | write-only | mandatory | This object is used to request creation of a new partition, using the nodes listed in the scalableComplexPartitionCreateTable. None of the systems can be part … |
| 1.3.6.1.4.1.2.3.51.3.9.4 | NodescalableComplexNode | |||
| 1.3.6.1.4.1.2.3.51.3.9.4.1 | TablescalableComplexNodeTable | not-accessible | mandatory | Table of scalable complex node information. This table provides information and control actions related to the nodes installed in the chassis. Complex, partiti… |
| 1.3.6.1.4.1.2.3.51.3.9.4.1.1 | RowscalableComplexNodeEntry | not-accessible | mandatory | Scalable complex node information. |
| 1.3.6.1.4.1.2.3.51.3.9.4.1.1.1 | ColumnscalableComplexNodeIndex | read-only | mandatory | The node table index. |
| 1.3.6.1.4.1.2.3.51.3.9.4.1.1.2 | ColumnscalableComplexNodeSerialNumber | read-only | mandatory | The machine serial number of the node which identifies the node. Note that uniqueness is not guaranteed. |
| 1.3.6.1.4.1.2.3.51.3.9.4.1.1.3 | ColumnscalableComplexNodeKey | read-only | mandatory | The Node Key for the node. The Node Key is used to select the node for some particular action. |
| 1.3.6.1.4.1.2.3.51.3.9.4.1.1.4 | ColumnscalableComplexNodePartitionID | read-only | mandatory | For an assigned node, the identifier of the partition this node is related to. For an unassigned node, this object has no meaning. |
| 1.3.6.1.4.1.2.3.51.3.9.4.1.1.5 | ColumnscalableComplexNodeRole | read-only | mandatory | Indicates if the node is assigned to a partition, and if so, provides an indication of whether the node is the primary node of the partition or not. |
| 1.3.6.1.4.1.2.3.51.3.9.4.1.1.6 | ColumnscalableComplexNodeNumPorts | read-only | mandatory | The number of remote nodes that this node has links to. |
| 1.3.6.1.4.1.2.3.51.3.9.4.2 | ScalarscalableComplexNodeSelect | write-only | mandatory | This Node Key is used to select the node for which a specific action will be taken |
| 1.3.6.1.4.1.2.3.51.3.9.4.3 | ScalarscalableComplexNodeAction | write-only | mandatory | The actions that can be applied to an unassigned node. The current state is provided by the scalableComplexNodeState object. |
| 1.3.6.1.4.1.2.3.51.3.9.4.4 | ScalarscalableComplexNodeAutoCreate | write-only | mandatory | This object is used to create a partition from all of the nodes in the complex. None of the systems can be in a partition and all the systems in the complex mu… |
| 1.3.6.1.4.1.2.3.51.3.9.5 | NodescalableComplexNodePort | |||
| 1.3.6.1.4.1.2.3.51.3.9.5.1 | TablescalableComplexNodePortTable | not-accessible | mandatory | Table of scalable complex node port information which provides details related to the port connectivity. Complex, partition and node information and control ar… |
| 1.3.6.1.4.1.2.3.51.3.9.5.1.1 | RowscalableComplexNodePortEntry | not-accessible | mandatory | Scalable complex node port information. |
| 1.3.6.1.4.1.2.3.51.3.9.5.1.1.1 | ColumnscalableComplexNodePortIndex | read-only | mandatory | The Node Port table index. |
| 1.3.6.1.4.1.2.3.51.3.9.5.1.1.2 | ColumnscalableComplexNodePortNum | read-only | mandatory | The port number of a port on this node. Note that this port number is 0-based, but since it is used as the table index (0 is not allowed), it will be presented… |
| 1.3.6.1.4.1.2.3.51.3.9.5.1.1.3 | ColumnscalableComplexNodePortRemNodeKey | read-only | mandatory | The Node Key for the remote node. |
| 1.3.6.1.4.1.2.3.51.3.9.5.1.1.4 | ColumnscalableComplexNodePortRemNum | read-only | mandatory | The zero-based port number of the remote port. |
| 1.3.6.1.4.1.2.3.51.3.9.5.1.1.5 | ColumnscalableComplexNodePortStatus | read-only | mandatory | The current status of the port. |
| 1.3.6.1.4.1.2.3.51.3.9.5.1.1.6 | ColumnscalableComplexNodePortType | read-only | mandatory | The port type. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| InetAddressIPv6 | OCTET STRING (SIZE (16)) EntryStatus ::= INTEGER { valid(1), createRequest(2), underCreation(3), invalid(4) } | current | Represents an IPv6 network address. Since MIB browsers may require different formats, the address is expected to be the 16 byte address in network-byte order, and shortened formats such as 0::0 are not accepted in SET o… |