MIB Viewer

INFINET-BRIDGE-MIB

113 objects
The mib module for Infinet bridge.
Imported Objects
IF-MIBInterfaceIndex
INFINET-MIBwanflex
SNMPv2-CONFOBJECT-GROUP
SNMPv2-SMICounter32 Gauge32 Integer32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE TimeTicks Unsigned32
SNMPv2-TCDisplayString MacAddress TEXTUAL-CONVENTION
OIDNameAccessStatusDescription
1.3.6.1.4.1.3942.1.1.8IdentityiwBrMIBThe mib module for Infinet bridge.
1.3.6.1.4.1.3942.1.1.8.1NodeiwBrMIBObjects
1.3.6.1.4.1.3942.1.1.8.1.1NodeiwBrBase
1.3.6.1.4.1.3942.1.1.8.1.1.1ScalariwBrBaseAddressread-onlycurrentThe MAC address used by this bridge when it must be referred to in a unique fashion.
1.3.6.1.4.1.3942.1.1.8.1.1.2ScalariwBrBasePortsread-onlycurrentThe number of ports controlled by this bridging entity.
1.3.6.1.4.1.3942.1.1.8.1.1.3ScalariwBrBaseTyperead-onlycurrentIndicates what type of bridging this bridge can perform.
1.3.6.1.4.1.3942.1.1.8.1.1.4ScalariwBrLocalTagread-onlycurrentVLAN tag for packets originated from this bridging entity.
1.3.6.1.4.1.3942.1.1.8.1.2NodeiwBrStp
1.3.6.1.4.1.3942.1.1.8.1.2.1ScalariwBrStpProtoSpecread-onlycurrentAn indication of what version of the Spanning Tree Protocol is being run. IEEE 802.1D implementations will return 'ieee8021d(3)'.
1.3.6.1.4.1.3942.1.1.8.1.2.2ScalariwBrStpPriorityread-writecurrentThe value of the write-able portion of the Bridge ID (i.e., the first two octets of the (8 octet long) Bridge ID). The other (last) 6 octets of the Bridge ID a…
1.3.6.1.4.1.3942.1.1.8.1.2.3ScalariwBrStpTimeSinceTopoChangeread-onlycurrentThe time (in hundredths of a second) since the last time a topology change was detected by the bridge entity. For RSTP, this reports the time since the tcWhile…
1.3.6.1.4.1.3942.1.1.8.1.2.4ScalariwBrStpTopChangesread-onlycurrentThe total number of topology changes detected by this bridge since the management entity was last reset or initialized.
1.3.6.1.4.1.3942.1.1.8.1.2.5ScalariwBrStpMaxAgeread-onlycurrentThe maximum age of Spanning Tree Protocol information learned from the network on any port before it is discarded, in units of hundredths of a second. This is …
1.3.6.1.4.1.3942.1.1.8.1.2.6ScalariwBrStpHelloTimeread-onlycurrentThe amount of time between the transmission of Configuration bridge PDUs by this node on any port when it is the root of the spanning tree, or trying to become…
1.3.6.1.4.1.3942.1.1.8.1.2.7ScalariwBrStpHoldTimeread-onlycurrentThis time value determines the interval length during which no more than two Configuration bridge PDUs shall be transmitted by this node, in units of hundredth…
1.3.6.1.4.1.3942.1.1.8.1.2.8ScalariwBrStpForwardDelayread-onlycurrentThis time value, measured in units of hundredths of a second, controls how fast a port changes its spanning state when moving towards the Forwarding state. The…
1.3.6.1.4.1.3942.1.1.8.1.2.9ScalariwBrStpBridgeMaxAgeread-writecurrentThe value that all bridges use for MaxAge when this bridge is acting as the root. Note that the range for this parameter is related to the value of iwBrStpBrid…
1.3.6.1.4.1.3942.1.1.8.1.2.10ScalariwBrStpBridgeHelloTimeread-writecurrentThe value that all bridges use for HelloTime when this bridge is acting as the root. The granularity of this timer is 1 second. An agent may return a badValue …
1.3.6.1.4.1.3942.1.1.8.1.2.11ScalariwBrStpBridgeForwardDelayread-writecurrentThe value that all bridges use for ForwardDelay when this bridge is acting as the root. Note that the range for this parameter is related to the value of iwBrS…
1.3.6.1.4.1.3942.1.1.8.1.3NodeiwBrPorts
1.3.6.1.4.1.3942.1.1.8.1.3.1TableiwBrPortTablenot-accessiblecurrentA table that contains information related to bridge ports sorted by switch groups they participate in. Any physical interface can participate in multiple switc…
1.3.6.1.4.1.3942.1.1.8.1.3.1.1RowiwBrPortEntrynot-accessiblecurrentInformation about a specific bridge port.
1.3.6.1.4.1.3942.1.1.8.1.3.1.1.1ColumniwBrPortGrpIdread-onlycurrentConfigured switch group Id. The zero value is special value to identify kernel bridge group which is always present in a running bridge entity. 'Next to' relat…
1.3.6.1.4.1.3942.1.1.8.1.3.1.1.2ColumniwBrPortIdread-onlycurrentInterface index of physical interface which participates in switch group given by iwBrPortGrpId. Index pair of iwBrPortGrpId and iwBrPortId points to unique sw…
1.3.6.1.4.1.3942.1.1.8.1.3.1.1.3ColumniwBrPortStpPrioread-writecurrentThe value of the port priority.
1.3.6.1.4.1.3942.1.1.8.1.3.1.1.4ColumniwBrPortStpStateread-onlycurrentThe port's current state, as defined by application of the Spanning Tree Protocol. This state controls what action a port takes on reception of a frame. If the…
1.3.6.1.4.1.3942.1.1.8.1.3.1.1.5ColumniwBrPortStpRoleread-onlycurrentThe port's current role, as defined by application of the Spanning Tree Protocol.
1.3.6.1.4.1.3942.1.1.8.1.3.1.1.6ColumniwBrPortStpDesCostread-onlycurrentThe path cost of the Designated Port of the segment connected to this port. This value is compared to the Root Path Cost field in received bridge PDUs.
1.3.6.1.4.1.3942.1.1.8.1.3.1.1.7ColumniwBrPortStpDesBridgeread-onlycurrentThe Bridge Identifier of the bridge that this port considers to be the Designated Bridge for this port's segment.
1.3.6.1.4.1.3942.1.1.8.1.3.1.1.8ColumniwBrPortStpDesPortread-onlycurrentThe Port Identifier of the port on the Designated Bridge for this port's segment.
1.3.6.1.4.1.3942.1.1.8.1.3.1.1.9ColumniwBrPortStpFwdTransitionsread-onlycurrentThe number of times this port has transitioned from the Learning state to the Forwarding state.
1.3.6.1.4.1.3942.1.1.8.1.3.1.1.10ColumniwBrPortStpPathCost32read-writecurrentThe contribution of this port to the path cost of paths towards the spanning tree root which include this port. 802.1D-1998 recommends that the default value o…
1.3.6.1.4.1.3942.1.1.8.1.3.1.1.11ColumniwBrPortVlanAlterationread-writecurrentVLAN alteration algorithm for this port. If the value is -1, any VLAN tag will be stripped if present. If the value is (1..4095), then VLAN tag will be added o…
1.3.6.1.4.1.3942.1.1.8.1.4NodeiwBrDb
1.3.6.1.4.1.3942.1.1.8.1.4.1ScalariwBrDbEntryDiscardsread-onlycurrentThe total number of Forwarding Database entries that have been or would have been learned, but have been discarded due to a lack of storage space in the Forwar…
1.3.6.1.4.1.3942.1.1.8.1.4.2ScalariwBrDbAgingTimeread-writecurrentThe timeout period in seconds for aging out dynamically-learned forwarding information.
1.3.6.1.4.1.3942.1.1.8.1.4.3TableiwBrDbTablenot-accessiblecurrentA table that contains information about unicast entries for which the bridge has forwarding and/or filtering information. This information is used by the trans…
1.3.6.1.4.1.3942.1.1.8.1.4.3.1RowiwBrDbEntrynot-accessiblecurrentInformation about a specific unicast MAC address for which the bridge has some forwarding and/or filtering information.
1.3.6.1.4.1.3942.1.1.8.1.4.3.1.1ColumniwBrDbGroupIdread-onlycurrentId of a switch group whose rules were applied for bridging. The special value of zero is used for kernel group. 'Next to' relationship between group Ids is bas…
1.3.6.1.4.1.3942.1.1.8.1.4.3.1.2ColumniwBrDbAddressread-onlycurrentLearned source MAC address.
1.3.6.1.4.1.3942.1.1.8.1.4.3.1.3ColumniwBrDbPortread-onlycurrentIndex of an interface the frame with learned source MAC address was received from. This is an instance of ifIndex object defined in IF-MIB.
1.3.6.1.4.1.3942.1.1.8.1.4.3.1.4ColumniwBrDbStatusread-onlycurrentSource MAC address status - learned or self.
1.3.6.1.4.1.3942.1.1.8.1.4.3.1.5ColumniwBrDbGwMacread-onlycurrentMAC address of MINT gateway which delivered a frame with learned source MAC address.
1.3.6.1.4.1.3942.1.1.8.1.4.3.1.6ColumniwBrDbGwTyperead-onlycurrentGateway type - unknown, broadcast or gateway.
1.3.6.1.4.1.3942.1.1.8.1.4.3.1.7ColumniwBrDbCostread-onlycurrentPath cost for learned source MAC address.
1.3.6.1.4.1.3942.1.1.8.1.4.3.1.8ColumniwBrDbUseCntread-onlycurrentUsage count for this database record.
1.3.6.1.4.1.3942.1.1.8.1.4.3.1.9ColumniwBrDbDeadread-onlycurrentSeconds before this database record lifetime expires.
1.3.6.1.4.1.3942.1.1.8.1.4.3.1.10ColumniwBrDbTrunkVLANIdread-onlycurrentFor trunk groups, VLAN from which the record was learned from. For not trunk groups this value is zero.
1.3.6.1.4.1.3942.1.1.8.1.4.3.1.11ColumniwBrDbGroupOrderread-onlycurrentThe order in which this whole group will be applied for packet forwarding.
1.3.6.1.4.1.3942.1.1.8.1.5NodeiwBrGrp
1.3.6.1.4.1.3942.1.1.8.1.5.1TableiwBrGrpTablenot-accessiblecurrentA table which contains base configuration info for switch groups.
1.3.6.1.4.1.3942.1.1.8.1.5.1.1RowiwBrGrpEntrynot-accessiblecurrentEach entry contains base configuration info for one switch group.
1.3.6.1.4.1.3942.1.1.8.1.5.1.1.1ColumniwBrGrpIdread-onlycurrentConfigured switch group Id. The zero value is special value to identify kernel bridge group which is always present in a running bridge entity. 'Next to' relat…
1.3.6.1.4.1.3942.1.1.8.1.5.1.1.2ColumniwBrGrpTyperead-writecurrentBridge group type - normal or trunk.
1.3.6.1.4.1.3942.1.1.8.1.5.1.1.3ColumniwBrGrpUsChanread-onlycurrentUpstream channel number.
1.3.6.1.4.1.3942.1.1.8.1.5.1.1.4ColumniwBrGrpDsChanread-onlycurrentDownstream channel number.
1.3.6.1.4.1.3942.1.1.8.1.5.1.1.5ColumniwBrGrpInTrunkread-onlycurrentIf switch group is configured as trunk group then this value is the same as iwBrGrpId, otherwise it is zero.
1.3.6.1.4.1.3942.1.1.8.1.5.1.1.6ColumniwBrGrpUncoupledread-writecurrentThis flag is set when switch group is uncoupled.
1.3.6.1.4.1.3942.1.1.8.1.5.1.1.7ColumniwBrGrpFlgSTPread-writecurrentThis flag is set when switch group participates in STP.
1.3.6.1.4.1.3942.1.1.8.1.5.1.1.8ColumniwBrGrpFlgIGMPread-writecurrentThis flag is set when IGMP-snooping is on for switch group.
1.3.6.1.4.1.3942.1.1.8.1.5.1.1.9ColumniwBrGrpFlgRptrread-writecurrentThis flag is set for repeater group.
1.3.6.1.4.1.3942.1.1.8.1.5.1.1.10ColumniwBrGrpFlgAdminread-writecurrentThis flag is set for admin group.
1.3.6.1.4.1.3942.1.1.8.1.5.1.1.11ColumniwBrGrpFlgActread-writecurrentThis flag is set when group is active.
1.3.6.1.4.1.3942.1.1.8.1.5.1.1.12ColumniwBrGrpFlgOperread-writecurrentThis flag is set when group is operative.
1.3.6.1.4.1.3942.1.1.8.1.5.1.1.13ColumniwBrGrpInforead-onlycurrentTextual description for switch group.
1.3.6.1.4.1.3942.1.1.8.1.5.1.1.14ColumniwBrGrpForwardedread-onlycurrentCounter of frames forwarded by switch group.
1.3.6.1.4.1.3942.1.1.8.1.5.1.1.15ColumniwBrGrpFloodedread-onlycurrentCounter of frames flooded by switch group.
1.3.6.1.4.1.3942.1.1.8.1.5.1.1.16ColumniwBrGrpDropSTPLread-onlycurrentCounter of frames dropped due to STP lock.
1.3.6.1.4.1.3942.1.1.8.1.5.1.1.17ColumniwBrGrpDropUNRDread-onlycurrentCounter of frames dropped due to unreachable destination.
1.3.6.1.4.1.3942.1.1.8.1.5.1.1.18ColumniwBrGrpDropFWRLread-onlycurrentCounter of frames dropped due to firewall rules.
1.3.6.1.4.1.3942.1.1.8.1.5.1.1.19ColumniwBrGrpDropLOOPread-onlycurrentCounter of frames dropped due to possible loop.
1.3.6.1.4.1.3942.1.1.8.1.5.1.1.20ColumniwBrGrpDropNOBGread-onlycurrentCounter of frames dropped due to no bridge group accepted them. The value of this counter is always 0 for all groups except kernel group.
1.3.6.1.4.1.3942.1.1.8.1.5.1.1.21ColumniwBrGrpDropLCNAread-onlycurrentCounter of frames dropped due to forwarding frame to kernel by non-admin group in 'strict-admin' mode.
1.3.6.1.4.1.3942.1.1.8.1.5.1.1.22ColumniwBrGrpDropJOINread-onlycurrentCounter of frames dropped due to ports are joined by MINT.
1.3.6.1.4.1.3942.1.1.8.1.5.1.1.23ColumniwBrGrpDropSDPSread-onlycurrentCounter of frames dropped due to frame source port is same as destination port.
1.3.6.1.4.1.3942.1.1.8.1.5.1.1.24ColumniwBrGrpStpRootread-onlycurrentThe unique Bridge Identifier of the Bridge recorded as the Root in the Configuration BPDUs transmitted by the Designated Bridge for the segment to which the po…
1.3.6.1.4.1.3942.1.1.8.1.5.1.1.25ColumniwBrGrpStpRootPortread-onlycurrentifIndex of root port for this Bridge entity participating in STP or RSTP protocol. The special value of zero is used when this Bridge entity assumes it is STP …
1.3.6.1.4.1.3942.1.1.8.1.5.1.1.26ColumniwBrPortStpPVerread-onlycurrentVersion of STP protocol used by this Bridge entity.
1.3.6.1.4.1.3942.1.1.8.1.5.1.1.27ColumniwBrGrpDefaultActionread-onlycurrentDefault rule for switch group which is applied when no one rule (if any) for this group was matched.
1.3.6.1.4.1.3942.1.1.8.1.5.1.1.28ColumniwBrGrpXVlanread-onlycurrentPrimary rule for switch group which should be applied for any frame without VLAN tag. If the value is 1, then for any frame without VLAN tag other rules are ig…
1.3.6.1.4.1.3942.1.1.8.1.5.1.1.29ColumniwBrGrpPermittedVLANread-onlycurrentPrimary list for switch group which should be applied for any frame which was not permitted by iwBrGrpXVlan rule. If the value is negative and equal by modulus…
1.3.6.1.4.1.3942.1.1.8.1.6NodeiwBrRules
1.3.6.1.4.1.3942.1.1.8.1.6.1TableiwBrRuleTablenot-accessiblecurrentA table which contains filtering rules for switch groups.
1.3.6.1.4.1.3942.1.1.8.1.6.1.1RowiwBrRuleEntrynot-accessiblecurrentEach entry contains one filtering rule for a switch group. Any frame is checked only against the rules for the group it falls into. The rule with the least iwB…
1.3.6.1.4.1.3942.1.1.8.1.6.1.1.1ColumniwBrRuleGrpIdread-onlycurrentConfigured switch group Id. 'Next to' relationship between group Ids is based upon group order numbers.
1.3.6.1.4.1.3942.1.1.8.1.6.1.1.2ColumniwBrRulePriorityread-onlycurrentConfigured rule priority. The less the priority, the earlier the rule will be used for frame bridging decision.
1.3.6.1.4.1.3942.1.1.8.1.6.1.1.3ColumniwBrRuleActionread-onlycurrentConfigured rule action.
1.3.6.1.4.1.3942.1.1.8.1.6.1.1.4ColumniwBrRuleMatchListread-onlycurrentIndex in the iwBrListTable to locate conceptual row containing the list of values used for the rule. The special value of zero denotes that there is no concept…
1.3.6.1.4.1.3942.1.1.8.1.6.1.1.5ColumniwBrRuleVlanListread-onlycurrentIndex in the iwBrListTable to locate conceptual row containing the list of values used for the rule. The special value of zero denotes that there is no concept…
1.3.6.1.4.1.3942.1.1.8.1.6.1.1.6ColumniwBrRuleIfaceListread-onlycurrentIndex in the iwBrListTable to locate conceptual row containing the list of values used for the rule. The special value of zero denotes that there is no concept…
1.3.6.1.4.1.3942.1.1.8.1.6.1.1.7ColumniwBrRuleSrcListread-onlycurrentIndex in the iwBrListTable to locate conceptual row containing the list of values used for the rule. The special value of zero denotes that there is no concept…
1.3.6.1.4.1.3942.1.1.8.1.6.1.1.8ColumniwBrRuleDstListread-onlycurrentIndex in the iwBrListTable to the list of values used for the rule. The special value of zero denotes that there is no conceptual row in iwBrListTable with the…
1.3.6.1.4.1.3942.1.1.8.1.6.1.1.9ColumniwBrRuleProtoListread-onlycurrentIndex in the iwBrListTable to the list of values used for the rule. The special value of zero denotes that there is no conceptual row in iwBrListTable with the…
1.3.6.1.4.1.3942.1.1.8.1.6.2TableiwBrListTablenot-accessiblecurrentA table which contains lists of values or value ranges to trigger a switch rule. The existence of separate tables for switch rules and value ranges gives possi…
1.3.6.1.4.1.3942.1.1.8.1.6.2.1RowiwBrListEntrynot-accessiblecurrentEach entry contains a list of values applicable to trigger a rule from iwBrRuleTable.
1.3.6.1.4.1.3942.1.1.8.1.6.2.1.1ColumniwBrListIdread-onlycurrentiwBrListId index value is used to refer to iwBrListValues for particular rule from iwBrRuleTable.
1.3.6.1.4.1.3942.1.1.8.1.6.2.1.2ColumniwBrListTyperead-onlycurrentiwBrListType determines the way to interpret value ranges given in iwBrListValues.
1.3.6.1.4.1.3942.1.1.8.1.6.2.1.3ColumniwBrListNameread-onlycurrentAny human-readable name of the list. The list names which are indirectly created by system appear as LST1, LST2, etc. These names can be then deliberately ower…
1.3.6.1.4.1.3942.1.1.8.1.6.2.1.4ColumniwBrListValuesread-onlycurrent
1.3.6.1.4.1.3942.1.1.8.1.7NodeiwBrBlackList
1.3.6.1.4.1.3942.1.1.8.1.7.1TableiwBrBlackListTablenot-accessiblecurrentA table which contains blacklisted MAC addresses by groups.
1.3.6.1.4.1.3942.1.1.8.1.7.1.1RowiwBrBlackListEntrynot-accessiblecurrentEach entry contains one src/dst MAC address pair.
1.3.6.1.4.1.3942.1.1.8.1.7.1.1.1ColumniwBrBlackListGrpIdread-onlycurrentConfigured switch group Id for the group which owns this black list entry. 'Next to' relationship between group Ids is based upon group order numbers.
1.3.6.1.4.1.3942.1.1.8.1.7.1.1.2ColumniwBrBlackListDstMacread-onlycurrentDestination MAC address of blacklist entry.
1.3.6.1.4.1.3942.1.1.8.1.7.1.1.3ColumniwBrBlackListSrcMacread-onlycurrentSource MAC address of blacklist entry.
1.3.6.1.4.1.3942.1.1.8.1.7.1.1.4ColumniwBrBlackListTimeread-onlycurrentLifetime of this black list entry in seconds. In spite of the entry exists, frames are still flooded till lifetime reaches 3s; then frames which match such 'ma…
1.3.6.1.4.1.3942.1.1.8.2NodeiwBrMIBNotificationsPrefix
1.3.6.1.4.1.3942.1.1.8.2.0NodeiwBrMIBNotifications
1.3.6.1.4.1.3942.1.1.8.3NodeiwBrMIBConformance
1.3.6.1.4.1.3942.1.1.8.3.2GroupiwBrMIBGroupcurrent
Type Definitions
NameSyntaxStatusDescription
BridgeGroupIdOrZeroInteger32 (0..4094)currentThis textual convention is introduced to define a greater than zero value for any configured bridge group in the managed switch. Special zero value in groupId context is used to identify kernel bridge group which is alw…
BridgeIdOCTET STRING (SIZE (8))currentThe Bridge-Identifier, as used in the Spanning Tree Protocol, to uniquely identify a bridge. Its first two octets (in network byte order) contain a priority value, and its last 6 octets contain the MAC address used to r…
TimeoutInteger32currentA Spanning Tree Protocol (STP) timer in units of 1/100 seconds. Several objects in this MIB module represent values of timers used by the Spanning Tree Protocol. In this MIB, these timers have values in units of hundred…