MIB Viewer

INFINET-EXTCES-UNIT0-DS1-MIB

73 objects
The mib module, containing various WanFlex options.
Imported Objects
IF-MIBifIndex InterfaceIndex
INFINET-EXTCES-MIBcesOverWlanUnit0
PerfHist-TC-MIBPerfCurrentCount PerfIntervalCount PerfTotalCount
SNMPv2-CONFNOTIFICATION-GROUP OBJECT-GROUP
SNMPv2-SMIMODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE transmission
SNMPv2-TCDisplayString TimeStamp TruthValue
OIDNameAccessStatusDescription
1.3.6.1.4.1.3942.2.1.1.2IdentitycesOverWlanUnit0Ds1The mib module, containing various WanFlex options.
1.3.6.1.4.1.3942.2.1.1.2.6TablecesOverWlanUnit0Dsx1ConfigTablenot-accessiblecurrentThe DS1 Configuration table.
1.3.6.1.4.1.3942.2.1.1.2.6.1RowcesOverWlanUnit0Dsx1ConfigEntrynot-accessiblecurrentAn entry in the DS1 Configuration table.
1.3.6.1.4.1.3942.2.1.1.2.6.1.1ColumncesOverWlanUnit0Dsx1LineIndexread-onlycurrentThis object should be made equal to ifIndex. The next paragraph describes its previous usage. Making the object equal to ifIndex allows proper use of the ifSta…
1.3.6.1.4.1.3942.2.1.1.2.6.1.2ColumncesOverWlanUnit0Dsx1IfIndexread-onlydeprecatedThis value for this object is equal to the value of ifIndex from the Interfaces table (RFC 2863).
1.3.6.1.4.1.3942.2.1.1.2.6.1.3ColumncesOverWlanUnit0Dsx1TimeElapsedread-onlycurrentThe number of seconds that have elapsed since the beginning of the near-end current error- measurement period. If, for some reason, such as an adjustment in th…
1.3.6.1.4.1.3942.2.1.1.2.6.1.4ColumncesOverWlanUnit0Dsx1ValidIntervalsread-onlycurrentThe number of previous near-end intervals for which data was collected. The value will be 96 unless the interface was brought online within the last 24 hours, …
1.3.6.1.4.1.3942.2.1.1.2.6.1.5ColumncesOverWlanUnit0Dsx1LineTyperead-onlycurrentThis variable indicates the variety of DS1 Line implementing this circuit. The type of circuit affects the number of bits per second that the circuit can reaso…
1.3.6.1.4.1.3942.2.1.1.2.6.1.6ColumncesOverWlanUnit0Dsx1LineCodingread-onlycurrentThis variable describes the variety of Zero Code Suppression used on this interface, which in turn affects a number of its characteristics. dsx1JBZS refers the…
1.3.6.1.4.1.3942.2.1.1.2.6.1.7ColumncesOverWlanUnit0Dsx1SendCoderead-onlycurrentThis variable indicates what type of code is being sent across the DS1 interface by the device. The values mean the following: dsx1SendNoCode sending looped or…
1.3.6.1.4.1.3942.2.1.1.2.6.1.8ColumncesOverWlanUnit0Dsx1CircuitIdentifierread-onlycurrentThis variable contains the transmission vendor's circuit identifier, for the purpose of facilitating troubleshooting.
1.3.6.1.4.1.3942.2.1.1.2.6.1.9ColumncesOverWlanUnit0Dsx1LoopbackConfigread-onlycurrentThis variable represents the desired loopback configuration of the DS1 interface. Agents supporting read/write access should return inconsistentValue in respon…
1.3.6.1.4.1.3942.2.1.1.2.6.1.10ColumncesOverWlanUnit0Dsx1LineStatusread-onlycurrentThis variable indicates the line status of the interface. It contains loopback, failure, received alarm and transmitted alarms information. The cesOverWlanUnit…
1.3.6.1.4.1.3942.2.1.1.2.6.1.11ColumncesOverWlanUnit0Dsx1SignalModeread-onlycurrent'none' indicates that no bits are reserved for signaling on this channel. 'robbedBit' indicates that DS1 Robbed Bit Signaling is in use. 'bitOriented' indicate…
1.3.6.1.4.1.3942.2.1.1.2.6.1.12ColumncesOverWlanUnit0Dsx1TransmitClockSourceread-onlycurrentThe source of transmit clock. 'loopTiming' indicates that the recovered receive clock is used as the transmit clock. 'localTiming' indicates that a local clock…
1.3.6.1.4.1.3942.2.1.1.2.6.1.13ColumncesOverWlanUnit0Dsx1Fdlread-onlycurrentThis bitmap describes the use of the facilities data link and is the sum of the capabilities. Set any bits that are appropriate: other(1), dsx1AnsiT1403(2), ds…
1.3.6.1.4.1.3942.2.1.1.2.6.1.14ColumncesOverWlanUnit0Dsx1InvalidIntervalsread-onlycurrentThe number of intervals in the range from 0 to cesOverWlanUnit0Dsx1ValidIntervals for which no data is available. This object will typically be zero except in …
1.3.6.1.4.1.3942.2.1.1.2.6.1.15ColumncesOverWlanUnit0Dsx1LineLengthread-onlycurrentThe length of the DS1 line in meters. This object provides information for line build-out circuitry. This object is only useful if the interface has configurab…
1.3.6.1.4.1.3942.2.1.1.2.6.1.16ColumncesOverWlanUnit0Dsx1LineStatusLastChangeread-onlycurrentThe value of MIB II's sysUpTime object at the time this DS1 entered its current line status state. If the current state was entered prior to the last re-initia…
1.3.6.1.4.1.3942.2.1.1.2.6.1.17ColumncesOverWlanUnit0Dsx1LineStatusChangeTrapEnableread-onlycurrentIndicates whether cesOverWlanUnit0Dsx1LineStatusChange traps should be generated for this interface.
1.3.6.1.4.1.3942.2.1.1.2.6.1.18ColumncesOverWlanUnit0Dsx1LoopbackStatusread-onlycurrentThis variable represents the current state of the loopback on the DS1 interface. It contains information about loopbacks established by a manager and remotely …
1.3.6.1.4.1.3942.2.1.1.2.6.1.19ColumncesOverWlanUnit0Dsx1Ds1ChannelNumberread-onlycurrentThis variable represents the channel number of the DS1/E1 on its parent DS2/E2 or DS3/E3. A value of 0 indicates that this DS1/E1 does not have a parent DS3/E3.
1.3.6.1.4.1.3942.2.1.1.2.6.1.20ColumncesOverWlanUnit0Dsx1Channelizationread-onlycurrentIndicates whether this DS1/E1 or DS2 is channelized or unchannelized. The value of enabledDs0(2) indicates that this is a DS1 channelized into DS0s. Setting th…
1.3.6.1.4.1.3942.2.1.1.2.6.1.21ColumncesOverWlanUnit0Dsx1LineModeread-onlycurrentThis setting puts the T1 framer into either long-haul (CSU) mode or short-haul (DSU) mode.
1.3.6.1.4.1.3942.2.1.1.2.6.1.22ColumncesOverWlanUnit0Dsx1LineBuildOutread-onlycurrentAttenuation setting for T1 framer in long haul (CSU) mode. The optional values are -7.5dB, -15dB, -22.5dB, and 0dB.
1.3.6.1.4.1.3942.2.1.1.2.6.1.23ColumncesOverWlanUnit0Dsx1LineImpedanceread-onlycurrentNominal line impedance. For T1 and J1 lines, the value is typically balanced100ohms(3). For E1 lines, the value is typically unbalanced75ohms(2) and balanced12…
1.3.6.1.4.1.3942.2.1.1.2.7TablecesOverWlanUnit0Dsx1CurrentTablenot-accessiblecurrentThe DS1 Current table contains various statistics being collected for the current 15-minute interval.
1.3.6.1.4.1.3942.2.1.1.2.7.1RowcesOverWlanUnit0Dsx1CurrentEntrynot-accessiblecurrentAn entry in the DS1 Current table.
1.3.6.1.4.1.3942.2.1.1.2.7.1.1ColumncesOverWlanUnit0Dsx1CurrentIndexread-onlycurrentThe index value that uniquely identifies the DS1 interface to which this entry is applicable. The interface identified by a particular value of this index is t…
1.3.6.1.4.1.3942.2.1.1.2.7.1.2ColumncesOverWlanUnit0Dsx1CurrentESsread-onlycurrentThe number of Errored Seconds.
1.3.6.1.4.1.3942.2.1.1.2.7.1.3ColumncesOverWlanUnit0Dsx1CurrentSESsread-onlycurrentThe number of Severely Errored Seconds.
1.3.6.1.4.1.3942.2.1.1.2.7.1.4ColumncesOverWlanUnit0Dsx1CurrentSEFSsread-onlycurrentThe number of Severely Errored Framing Seconds.
1.3.6.1.4.1.3942.2.1.1.2.7.1.5ColumncesOverWlanUnit0Dsx1CurrentUASsread-onlycurrentThe number of Unavailable Seconds.
1.3.6.1.4.1.3942.2.1.1.2.7.1.6ColumncesOverWlanUnit0Dsx1CurrentCSSsread-onlycurrentThe number of Controlled Slip Seconds.
1.3.6.1.4.1.3942.2.1.1.2.7.1.7ColumncesOverWlanUnit0Dsx1CurrentPCVsread-onlycurrentThe number of Path Coding Violations.
1.3.6.1.4.1.3942.2.1.1.2.7.1.8ColumncesOverWlanUnit0Dsx1CurrentLESsread-onlycurrentThe number of Line Errored Seconds.
1.3.6.1.4.1.3942.2.1.1.2.7.1.9ColumncesOverWlanUnit0Dsx1CurrentBESsread-onlycurrentThe number of Bursty Errored Seconds.
1.3.6.1.4.1.3942.2.1.1.2.7.1.10ColumncesOverWlanUnit0Dsx1CurrentDMsread-onlydeprecatedThe number of Degraded Minutes.
1.3.6.1.4.1.3942.2.1.1.2.7.1.11ColumncesOverWlanUnit0Dsx1CurrentLCVsread-onlycurrentThe number of Line Coding Violations (LCVs).
1.3.6.1.4.1.3942.2.1.1.2.8TablecesOverWlanUnit0Dsx1IntervalTablenot-accessiblecurrentThe DS1 Interval table contains various statistics collected by each DS1 interface over the previous 24 hours of operation. The past 24 hours are broken into 9…
1.3.6.1.4.1.3942.2.1.1.2.8.1RowcesOverWlanUnit0Dsx1IntervalEntrynot-accessiblecurrentAn entry in the DS1 Interval table.
1.3.6.1.4.1.3942.2.1.1.2.8.1.1ColumncesOverWlanUnit0Dsx1IntervalIndexread-onlycurrentThe index value that uniquely identifies the DS1 interface to which this entry is applicable. The interface identified by a particular value of this index is t…
1.3.6.1.4.1.3942.2.1.1.2.8.1.2ColumncesOverWlanUnit0Dsx1IntervalNumberread-onlycurrentA number between 1 and 96, where 1 is the most recently completed 15-minute interval and 96 is the 15-minute interval completed 23 hours and 45 minutes prior t…
1.3.6.1.4.1.3942.2.1.1.2.8.1.3ColumncesOverWlanUnit0Dsx1IntervalESsread-onlycurrentThe number of Errored Seconds.
1.3.6.1.4.1.3942.2.1.1.2.8.1.4ColumncesOverWlanUnit0Dsx1IntervalSESsread-onlycurrentThe number of Severely Errored Seconds.
1.3.6.1.4.1.3942.2.1.1.2.8.1.5ColumncesOverWlanUnit0Dsx1IntervalSEFSsread-onlycurrentThe number of Severely Errored Framing Seconds.
1.3.6.1.4.1.3942.2.1.1.2.8.1.6ColumncesOverWlanUnit0Dsx1IntervalUASsread-onlycurrentThe number of Unavailable Seconds. This object may decrease if the occurrence of unavailable seconds occurs across an interval boundary.
1.3.6.1.4.1.3942.2.1.1.2.8.1.7ColumncesOverWlanUnit0Dsx1IntervalCSSsread-onlycurrentThe number of Controlled Slip Seconds.
1.3.6.1.4.1.3942.2.1.1.2.8.1.8ColumncesOverWlanUnit0Dsx1IntervalPCVsread-onlycurrentThe number of Path Coding Violations.
1.3.6.1.4.1.3942.2.1.1.2.8.1.9ColumncesOverWlanUnit0Dsx1IntervalLESsread-onlycurrentThe number of Line Errored Seconds.
1.3.6.1.4.1.3942.2.1.1.2.8.1.10ColumncesOverWlanUnit0Dsx1IntervalBESsread-onlycurrentThe number of Bursty Errored Seconds.
1.3.6.1.4.1.3942.2.1.1.2.8.1.11ColumncesOverWlanUnit0Dsx1IntervalDMsread-onlydeprecatedThe number of Degraded Minutes.
1.3.6.1.4.1.3942.2.1.1.2.8.1.12ColumncesOverWlanUnit0Dsx1IntervalLCVsread-onlycurrentThe number of Line Coding Violations.
1.3.6.1.4.1.3942.2.1.1.2.8.1.13ColumncesOverWlanUnit0Dsx1IntervalValidDataread-onlycurrentThis variable indicates whether the data for this interval is valid.
1.3.6.1.4.1.3942.2.1.1.2.9TablecesOverWlanUnit0Dsx1TotalTablenot-accessiblecurrentThe DS1 Total table contains the cumulative sum of the various statistics for the 24-hour period preceding the current interval.
1.3.6.1.4.1.3942.2.1.1.2.9.1RowcesOverWlanUnit0Dsx1TotalEntrynot-accessiblecurrentAn entry in the DS1 Total table.
1.3.6.1.4.1.3942.2.1.1.2.9.1.1ColumncesOverWlanUnit0Dsx1TotalIndexread-onlycurrentThe index value that uniquely identifies the DS1 interface to which this entry is applicable. The interface identified by a particular value of this index is t…
1.3.6.1.4.1.3942.2.1.1.2.9.1.2ColumncesOverWlanUnit0Dsx1TotalESsread-onlycurrentThe number of Errored Seconds encountered by a DS1 interface in the previous 24-hour interval. Invalid 15-minute intervals count as 0.
1.3.6.1.4.1.3942.2.1.1.2.9.1.3ColumncesOverWlanUnit0Dsx1TotalSESsread-onlycurrentThe number of Severely Errored Seconds encountered by a DS1 interface in the previous 24-hour interval. Invalid 15-minute intervals count as 0.
1.3.6.1.4.1.3942.2.1.1.2.9.1.4ColumncesOverWlanUnit0Dsx1TotalSEFSsread-onlycurrentThe number of Severely Errored Framing Seconds encountered by a DS1 interface in the previous 24-hour interval. Invalid 15-minute intervals count as 0.
1.3.6.1.4.1.3942.2.1.1.2.9.1.5ColumncesOverWlanUnit0Dsx1TotalUASsread-onlycurrentThe number of Unavailable Seconds encountered by a DS1 interface in the previous 24-hour interval. Invalid 15-minute intervals count as 0.
1.3.6.1.4.1.3942.2.1.1.2.9.1.6ColumncesOverWlanUnit0Dsx1TotalCSSsread-onlycurrentThe number of Controlled Slip Seconds encountered by a DS1 interface in the previous 24-hour interval. Invalid 15-minute intervals count as 0.
1.3.6.1.4.1.3942.2.1.1.2.9.1.7ColumncesOverWlanUnit0Dsx1TotalPCVsread-onlycurrentThe number of Path Coding Violations encountered by a DS1 interface in the previous 24-hour interval. Invalid 15-minute intervals count as 0.
1.3.6.1.4.1.3942.2.1.1.2.9.1.8ColumncesOverWlanUnit0Dsx1TotalLESsread-onlycurrentThe number of Line Errored Seconds encountered by a DS1 interface in the previous 24-hour interval. Invalid 15-minute intervals count as 0.
1.3.6.1.4.1.3942.2.1.1.2.9.1.9ColumncesOverWlanUnit0Dsx1TotalBESsread-onlycurrentThe number of Bursty Errored Seconds (BESs) encountered by a DS1 interface in the previous 24-hour interval. Invalid 15-minute intervals count as 0.
1.3.6.1.4.1.3942.2.1.1.2.9.1.10ColumncesOverWlanUnit0Dsx1TotalDMsread-onlydeprecatedThe number of Degraded Minutes (DMs) encountered by a DS1 interface in the previous 24-hour interval. Invalid 15-minute intervals count as 0.
1.3.6.1.4.1.3942.2.1.1.2.9.1.11ColumncesOverWlanUnit0Dsx1TotalLCVsread-onlycurrentThe number of Line Coding Violations (LCVs) encountered by a DS1 interface in the current 15-minute interval. Invalid 15-minute intervals count as 0.
1.3.6.1.4.1.3942.2.1.1.2.15NodecesOverWlanUnit0Ds1TrapsPrefix
1.3.6.1.4.1.3942.2.1.1.2.15.0NodecesOverWlanUnit0Ds1Traps
1.3.6.1.4.1.3942.2.1.1.2.15.0.1NotificationcesOverWlanUnit0Dsx1LineStatusChangecurrentA cesOverWlanUnit0Dsx1LineStatusChange trap is sent when the value of an instance dsx1LineStatus changes. It can be utilized by an Network Management Station (…
1.3.6.1.4.1.3942.2.1.1.2.16NodecesOverWlanUnit0MIBConformance
1.3.6.1.4.1.3942.2.1.1.2.16.1GroupcesOverWlanUnit0Notificationscurrent
1.3.6.1.4.1.3942.2.1.1.2.16.2GroupcesOverWlanUnit0Groupcurrent
MIB Viewer