MIB Viewer

Search, upload, browse, or download from a database of over 11,000 SNMP MIBs. MIB Viewer lets you look up any MIB object by name, OID, or number, view its syntax, access level, and description, trace its place in the MIB tree, and generate ready-to-run SNMP commands — all in your browser.

What's a MIB?

A MIB (Management Information Base) is a structured document that defines the data a device exposes over SNMP — things like interface counters, system uptime, or CPU load. Each module declares a set of named objects, organized into a tree.

What's SNMP?

SNMP (Simple Network Management Protocol) is how network devices — routers, switches, servers — report status and statistics to monitoring tools. It's the protocol; MIBs are the vocabulary it uses to describe what's being asked for.

What's an OID?

An OID (Object Identifier) is the numeric address of one piece of data in a MIB — a dotted sequence like 1.3.6.1.2.1.1.1, read from the root of a global tree down to one specific object. Names are easier to read; OIDs are what's actually sent over the wire.

Try it: sysDescr (1.3.6.1.2.1.1.1) →

Get started

Search for a MIB or OID above, or pick one from the list on the left.

Have your own MIB file? Drop it on the upload zone in the sidebar (or click to browse) to parse and explore it right away — it stays private to this browser session and isn't added to the shared library.

INFINET-EXTCES-UNIT0-PACKET-MIB

31 objects

The mib module, containing various WanFlex options.

Imported Objects

INFINET-EXTCES-MIB	cesOverWlanUnit0
SNMPv2-CONF	NOTIFICATION-GROUP OBJECT-GROUP
SNMPv2-SMI	Counter32 Integer32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32
SNMPv2-TC	TimeStamp

OID	Name	Access	Status	Description
1.3.6.1.4.1.3942.2.1.1.3	IdentitycesOverWlanUnit0Packet			The mib module, containing various WanFlex options.
1.3.6.1.4.1.3942.2.1.1.3.1	TablecesOverWlanUnit0PacketTable	not-accessible	current	The Packet protocol table.
1.3.6.1.4.1.3942.2.1.1.3.1.1	RowcesOverWlanUnit0PacketEntry	not-accessible	current	An entry in the Packet protocol table.
1.3.6.1.4.1.3942.2.1.1.3.1.1.1	ColumncesOverWlanUnit0PacketPortNumber	read-only	current	Port number for which this packet protocol statistics is relevant.
1.3.6.1.4.1.3942.2.1.1.3.1.1.2	ColumncesOverWlanUnit0PacketTxState	read-only	current	State of transmit of packet protocol.
1.3.6.1.4.1.3942.2.1.1.3.1.1.3	ColumncesOverWlanUnit0PacketRxState	read-only	current	State of receive of packet protocol.
1.3.6.1.4.1.3942.2.1.1.3.1.1.4	ColumncesOverWlanUnit0PacketTxRestarts	read-only	current	Number of transmit restarts.
1.3.6.1.4.1.3942.2.1.1.3.1.1.5	ColumncesOverWlanUnit0PacketRxRestarts	read-only	current	Number of receive restarts.
1.3.6.1.4.1.3942.2.1.1.3.1.1.6	ColumncesOverWlanUnit0PacketJitterCur	read-write	current	Current jitter buffer level, in microseconds.
1.3.6.1.4.1.3942.2.1.1.3.1.1.7	ColumncesOverWlanUnit0PacketJitterMin	read-only	current	Minimum jitter buffer level, in microseconds.
1.3.6.1.4.1.3942.2.1.1.3.1.1.8	ColumncesOverWlanUnit0PacketJitterMax	read-only	current	Maximum jitter buffer level, in microseconds.
1.3.6.1.4.1.3942.2.1.1.3.1.1.9	ColumncesOverWlanUnit0PacketTotalInPackets	read-only	current	Total packet-protocol packets received.
1.3.6.1.4.1.3942.2.1.1.3.1.1.10	ColumncesOverWlanUnit0PacketValidPackets	read-only	current	percent of valid packet-protocol packets received.
1.3.6.1.4.1.3942.2.1.1.3.1.1.11	ColumncesOverWlanUnit0PacketRbitPackets	read-only	current	number of packet-protocol packets received with R bit set.
1.3.6.1.4.1.3942.2.1.1.3.1.1.12	ColumncesOverWlanUnit0PacketLbitPackets	read-only	current	number of packet-protocol packets received with L bit set.
1.3.6.1.4.1.3942.2.1.1.3.1.1.13	ColumncesOverWlanUnit0PacketLatePackets	read-only	current	number of packet-protocol packets received too late.
1.3.6.1.4.1.3942.2.1.1.3.1.1.14	ColumncesOverWlanUnit0PacketLostPackets	read-only	current	number of packet-protocol packets what was lost.
1.3.6.1.4.1.3942.2.1.1.3.1.1.15	ColumncesOverWlanUnit0PacketOutOfOrderPackets	read-only	current	number of packet-protocol packets received out of order.
1.3.6.1.4.1.3942.2.1.1.3.1.1.16	ColumncesOverWlanUnit0PacketUnderrunPackets	read-only	current	number of times no packet was available while jitter buffer empty.
1.3.6.1.4.1.3942.2.1.1.3.1.1.17	ColumncesOverWlanUnit0PacketOverrunPackets	read-only	current	number of times no packet received while jitter buffer full.
1.3.6.1.4.1.3942.2.1.1.3.1.1.18	ColumncesOverWlanUnit0PacketInvalidSequencePackets	read-only	current	number of packet-protocol packets received with invalid sequence number.
1.3.6.1.4.1.3942.2.1.1.3.1.1.19	ColumncesOverWlanUnit0PacketDuplicatePackets	read-only	current	number of duplicate packet-protocol packets received.
1.3.6.1.4.1.3942.2.1.1.3.1.1.20	ColumncesOverWlanUnit0PacketMalformedPackets	read-only	current	number of malformed packet-protocol packets received.
1.3.6.1.4.1.3942.2.1.1.3.1.1.21	ColumncesOverWlanUnit0PacketJitterBufferStatus	read-only	current	Status of jitter buffer, available only within cesOverWlanUnit0PacketJitterStatusChange trap.
1.3.6.1.4.1.3942.2.1.1.3.1.1.22	ColumncesOverWlanUnit0PacketJitterBufferStatusLastChange	read-only	current	The value of MIB II's sysUpTime object at the time jitter buffer entered its current status state. If the current state was entered prior to the last re-initia…
1.3.6.1.4.1.3942.2.1.1.3.2	NodecesOverWlanUnit0PacketTrapsPrefix
1.3.6.1.4.1.3942.2.1.1.3.2.0	NodecesOverWlanUnit0PacketTraps
1.3.6.1.4.1.3942.2.1.1.3.2.0.1	NotificationcesOverWlanUnit0PacketJitterStatusChange		current	A cesOverWlanUnit0PacketJitterStatusChange trap is sent when status of jitter buffer changes.
1.3.6.1.4.1.3942.2.1.1.3.4	NodecesOverWlanUnit0PacketMIBConformance
1.3.6.1.4.1.3942.2.1.1.3.4.1	GroupcesOverWlanUnit0PacketNotifications		current
1.3.6.1.4.1.3942.2.1.1.3.4.2	GroupcesOverWlanUnit0PacketGroup		current