INFINET-XGRADIO-MIB
66 objects
The mib module, containing XG radio options.
Imported Objects
| INFINET-XG-MIB | xg |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | Counter32 Integer32 MODULE-IDENTITY OBJECT-TYPE |
| SNMPv2-TC | DisplayString |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.3942.4.1.1 | IdentityxgRadio | The mib module, containing XG radio options. | ||
| 1.3.6.1.4.1.3942.4.1.1.1 | NodexgRfCfg | |||
| 1.3.6.1.4.1.3942.4.1.1.1.1 | ScalarxgUnitType | read-write | current | This value indicates XG unit role in radio link. |
| 1.3.6.1.4.1.3942.4.1.1.1.2 | ScalarxgCellId | read-write | current | This value indicates cell id. |
| 1.3.6.1.4.1.3942.4.1.1.1.3 | ScalarxgQosStrategy | read-write | current | This value indicates QoS strategy. |
| 1.3.6.1.4.1.3942.4.1.1.1.4 | ScalarxgDlQuota | read-write | deprecated | Desirable ratio of downlink traffic related to all traffic in percents. |
| 1.3.6.1.4.1.3942.4.1.1.1.5 | ScalarxgFrameLength | read-write | current | Radio frame length in milliseconds. |
| 1.3.6.1.4.1.3942.4.1.1.1.6 | ScalarxgMaxDistance | read-write | current | This value indicates maximum allowed length of radio link in meters for auto-ranging algorithm. |
| 1.3.6.1.4.1.3942.4.1.1.1.7 | ScalarxgChannelWidth | read-only | current | Selected radio channel width in MHz. |
| 1.3.6.1.4.1.3942.4.1.1.1.8 | TablexgCarrierCfgTable | not-accessible | current | A table of radio configuration options by carrier index. |
| 1.3.6.1.4.1.3942.4.1.1.1.8.1 | RowxgCarrierCfgEntry | not-accessible | current | Each entry contains configuration options for separate radio carrier. |
| 1.3.6.1.4.1.3942.4.1.1.1.8.1.1 | ColumnxgCCIndex | read-only | current | Radio carrier index, ranging from 1 to maximum carrier number used. |
| 1.3.6.1.4.1.3942.4.1.1.1.8.1.2 | ColumnxgCcMaxTxPwr | read-write | current | Maximum allowed TX power in thousandths of dB, stepping by 250. |
| 1.3.6.1.4.1.3942.4.1.1.1.8.1.3 | ColumnxgCcFreqDl | read-write | current | Radio carrier frequency in MHz for downlink traffic. |
| 1.3.6.1.4.1.3942.4.1.1.1.8.1.4 | ColumnxgCcFreqUl | read-write | current | Radio carrier frequency in MHz for uplink traffic. |
| 1.3.6.1.4.1.3942.4.1.1.1.8.1.5 | ColumnxgCcAmcMode | read-write | current | If auto, then TX MCS is set to be upper value that is chosen by adaptive algorithm. If manual, then TX MCS is set to be equal to that value. |
| 1.3.6.1.4.1.3942.4.1.1.1.8.1.6 | ColumnxgCcAmcStrategy | read-write | current | Instructs MCS adaptive algorithm to prefer maximum radio bandwidth over radio transport block error rate or vice versa. |
| 1.3.6.1.4.1.3942.4.1.1.1.9 | ScalarxgOwnRadioIfIndex | read-only | current | XG Radio Interface index. The interface identified by a particular value of this index is the same interface as identified by the same value of RFC 1573's ifIn… |
| 1.3.6.1.4.1.3942.4.1.1.2 | NodexgRfStat | |||
| 1.3.6.1.4.1.3942.4.1.1.2.1 | ScalarxgLinkStatus | read-only | current | XG radio link status. |
| 1.3.6.1.4.1.3942.4.1.1.2.2 | ScalarxgDistance | read-only | current | Estimated length of radio link in meters. |
| 1.3.6.1.4.1.3942.4.1.1.2.3 | ScalarxgDlQuotaActual | read-only | current | Estimated portion of allowed downlink traffic related to all traffic in percents. |
| 1.3.6.1.4.1.3942.4.1.1.2.4 | ScalarxgTotalTxAirFrames | read-only | current | Amount of transmitted radio frames. |
| 1.3.6.1.4.1.3942.4.1.1.2.5 | ScalarxgTotalTxPackets | read-only | current | Amount of Ethernet packets transmitted via radio interface. |
| 1.3.6.1.4.1.3942.4.1.1.2.6 | ScalarxgTotalRxAirFrames | read-only | current | Amount of received radio frames. |
| 1.3.6.1.4.1.3942.4.1.1.2.7 | ScalarxgTotalRxPackets | read-only | current | Amount of Ethernet packets received from radio interface. |
| 1.3.6.1.4.1.3942.4.1.1.2.8 | ScalarxgTotalRxOkABs | read-only | current | Amount of received valid air blocks. |
| 1.3.6.1.4.1.3942.4.1.1.2.9 | ScalarxgTotalRxErrorABs | read-only | current | Amount of received invalid air blocks. |
| 1.3.6.1.4.1.3942.4.1.1.2.10 | ScalarxgTotalDlCapacity | read-only | current | Estimated capacity for downlink traffic in Kbps. |
| 1.3.6.1.4.1.3942.4.1.1.2.11 | ScalarxgTotalUlCapacity | read-only | current | Estimated capacity for uplink traffic in Kbps. |
| 1.3.6.1.4.1.3942.4.1.1.2.12 | TablexgRfCarrierStatTable | not-accessible | current | A table of radio data by carrier index. |
| 1.3.6.1.4.1.3942.4.1.1.2.12.1 | RowxgRfCarrierStatEntry | not-accessible | current | Each entry contains carrier-specific data by carrier index. |
| 1.3.6.1.4.1.3942.4.1.1.2.12.1.1 | ColumnxgRfCarrierIndex | read-only | current | Radio carrier index, ranging from 1 to maximum carrier number used. |
| 1.3.6.1.4.1.3942.4.1.1.2.12.1.2 | ColumnxgRfGoodRxFrames | read-only | current | Good Rx Frames counter. |
| 1.3.6.1.4.1.3942.4.1.1.2.12.1.3 | ColumnxgRfBadRxFrames | read-only | current | Bad Rx Frames counter. |
| 1.3.6.1.4.1.3942.4.1.1.2.12.1.4 | ColumnxgRfTxFrequency | read-only | current | Tx frequency, MHz |
| 1.3.6.1.4.1.3942.4.1.1.2.12.1.5 | ColumnxgRfRxFrequency | read-only | current | Rx frequency, MHz |
| 1.3.6.1.4.1.3942.4.1.1.2.12.1.6 | ColumnxgRfDfsStatus | read-only | current | DFS status: dfs-no-init(0), dfs-disabled(1), dfs-enabled(2), dfs-fg-radar-search(3), dfs-fg-rssi-scan(4), dfs-radar-found(5), dfs-bg-rssi-v(6), dfs-bg-rssi-h(7… |
| 1.3.6.1.4.1.3942.4.1.1.2.12.1.7 | ColumnxgRfRxAccFER | read-only | current | Rx accumulated bit error rate as 100000000 * <absolute ratio>. |
| 1.3.6.1.4.1.3942.4.1.1.2.13 | TablexgRfChainStatTable | not-accessible | current | A table of radio statistics by carrier and stream index. |
| 1.3.6.1.4.1.3942.4.1.1.2.13.1 | RowxgRfChainStatEntry | not-accessible | current | Each entry contains statistics by carrier and stream index. These indexes coupled together give unique index of radio chain. |
| 1.3.6.1.4.1.3942.4.1.1.2.13.1.1 | ColumnxgRfChainCarrierIndex | read-only | current | Radio carrier index, ranging from 1 to maximum carrier number used. |
| 1.3.6.1.4.1.3942.4.1.1.2.13.1.2 | ColumnxgRfChainStreamIndex | read-only | current | Radio stream index, ranging from 1 to maximum streams per carrier. Streams count varies depending on anthenna metod used: SISO, MIMO, double SISO, etc. |
| 1.3.6.1.4.1.3942.4.1.1.2.13.1.3 | ColumnxgTxMCS | read-only | current | Tx modulation index. |
| 1.3.6.1.4.1.3942.4.1.1.2.13.1.4 | ColumnxgRxMCS | read-only | current | Rx modulation index. |
| 1.3.6.1.4.1.3942.4.1.1.2.13.1.5 | ColumnxgCINR | read-only | current | Carrier to Interference + Noise Ratio |
| 1.3.6.1.4.1.3942.4.1.1.2.13.1.6 | ColumnxgABSRSSI | read-only | current | Absolute Received Signal Strength Indicator |
| 1.3.6.1.4.1.3942.4.1.1.2.13.1.7 | ColumnxgRxOkABs | read-only | current | Valid air block counter |
| 1.3.6.1.4.1.3942.4.1.1.2.13.1.8 | ColumnxgRxErrorABs | read-only | current | Invalid air block counter |
| 1.3.6.1.4.1.3942.4.1.1.2.13.1.9 | ColumnxgTxPwrActual | read-only | current | Measured TX power in hundredths of dB. |
| 1.3.6.1.4.1.3942.4.1.1.2.13.1.10 | ColumnxgADCRSSI | read-only | current | RSSI at ADC input per stream in dB |
| 1.3.6.1.4.1.3942.4.1.1.2.13.1.11 | ColumnxgTxGain | read-only | current | TX gain in hundredth of dB, stepping by 0.25 dB |
| 1.3.6.1.4.1.3942.4.1.1.2.13.1.12 | ColumnxgBerAmcCorrection | read-only | current | Deliberate CINR addition used to shift MCS selection while keeping BER as close as possible below allowed level. |
| 1.3.6.1.4.1.3942.4.1.1.2.13.1.13 | ColumnxgBerAmcWindowErr | read-only | current | Bit Error rate: least detectable value 1 correspomds to 1e-8; most possible value 100000000 means 1.0 special value -1 is used when no data for estimation are … |
| 1.3.6.1.4.1.3942.4.1.1.2.13.1.14 | ColumnxgBerAmcOneMinuteErr | read-only | current | BER AMC 1 minute Error: least detectable value 1 correspomds to 1e-8; most possible value 100000000 means 1.0 special value -1 is used when no data for estimat… |
| 1.3.6.1.4.1.3942.4.1.1.2.13.1.15 | ColumnxgBerAmcTenMinutesErr | read-only | current | BER AMC 10 minutes Error: least detectable value 1 correspomds to 1e-8; most possible value 100000000 means 1.0 special value -1 is used when no data for estim… |
| 1.3.6.1.4.1.3942.4.1.1.2.13.1.16 | ColumnxgBerAmcOneHourErr | read-only | current | BER AMC 1 hour Error: least detectable value 1 correspomds to 1e-8; most possible value 100000000 means 1.0 special value -1 is used when no data for estimatio… |
| 1.3.6.1.4.1.3942.4.1.1.2.13.1.17 | ColumnxgSTOD | read-only | current | symbol time offset deviation, measured in tenths of sample |
| 1.3.6.1.4.1.3942.4.1.1.2.14 | ScalarxgCatalinaTemp | read-only | current | Catalina temperature in degrees Celsius. |
| 1.3.6.1.4.1.3942.4.1.1.2.15 | ScalarxgTotalTxOctets | read-only | current | Amount of octets tramsmitted via radio interface. |
| 1.3.6.1.4.1.3942.4.1.1.2.16 | ScalarxgTotalRxOctets | read-only | current | Amount of octets received from radio interface. |
| 1.3.6.1.4.1.3942.4.1.1.3 | NodexgRadioMIBConformance | |||
| 1.3.6.1.4.1.3942.4.1.1.3.1 | NodexgRadioMIBCompliances | |||
| 1.3.6.1.4.1.3942.4.1.1.3.1.1 | CompliancexgRadioMIBCompliance | current | The compliance statement for Infinet XG bridge. | |
| 1.3.6.1.4.1.3942.4.1.1.3.2 | NodexgRadioMIBGroups | |||
| 1.3.6.1.4.1.3942.4.1.1.3.2.1 | GroupxgRadioGroup | current | The xgRadio group of objects provided for observation and manipulation with XG radio parameters. |