IOA-MIB
3966 objects
SNMP MIB for GX
Imported Objects
| SNMPv2-SMI | Counter64 enterprises MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | DateAndTime DisplayString RowPointer RowStatus TruthValue txt TEXTUAL-CONVENTION |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.21296 | Nodeinfinera | |||
| 1.3.6.1.4.1.21296.1 | Nodeproducts | |||
| 1.3.6.1.4.1.21296.1.2 | Identitygx | SNMP MIB for GX | ||
| 1.3.6.1.4.1.21296.1.2.1 | Nodeioa-alarm | |||
| 1.3.6.1.4.1.21296.1.2.1.1 | NodenotificationInfo | |||
| 1.3.6.1.4.1.21296.1.2.1.1.1 | NodenotificationObject | |||
| 1.3.6.1.4.1.21296.1.2.1.1.1.1 | ScalarnotificationNeName | read-only | current | NE name associated with this event. |
| 1.3.6.1.4.1.21296.1.2.1.1.1.2 | ScalarnotificationId | read-only | current | Notification id associated with this event. Notification id is a number that always increments with each notification, and that with a system reboot will keep … |
| 1.3.6.1.4.1.21296.1.2.1.1.1.3 | ScalarnotificationAlarmId | read-only | current | Unique identifier of the alarm. Based on resource + probable cause. Note: this id is intended as an alarm identifier, but it is not intended to provide any add… |
| 1.3.6.1.4.1.21296.1.2.1.1.1.4 | ScalarnotificationResource | read-only | current | Existing system resource. |
| 1.3.6.1.4.1.21296.1.2.1.1.1.5 | ScalarnotificationResourceType | read-only | current | Type of resource. |
| 1.3.6.1.4.1.21296.1.2.1.1.1.6 | ScalarnotificationAid | read-only | current | Resource Access Identifier (AID). Identifies an instance within a specific resource type. |
| 1.3.6.1.4.1.21296.1.2.1.1.1.7 | ScalarnotificationAlarmType | read-only | current | Type of alarm, based on an abbreviated code. |
| 1.3.6.1.4.1.21296.1.2.1.1.1.8 | ScalarnotificationAlarmTypeDescription | read-only | current | The reply will be truncated in 128 bytes. Human friendly description of the type of the alarm. |
| 1.3.6.1.4.1.21296.1.2.1.1.1.9 | ScalarnotificationDirection | read-only | current | Direction of the alarm. |
| 1.3.6.1.4.1.21296.1.2.1.1.1.10 | ScalarnotificationLocation | read-only | current | Location of the alarm. |
| 1.3.6.1.4.1.21296.1.2.1.1.1.11 | ScalarnotificationPerceivedSeverity | read-only | current | Severity of the alarm. |
| 1.3.6.1.4.1.21296.1.2.1.1.1.12 | ScalarnotificationReportedTime | read-only | current | Occurrence timestamp for the alarm. |
| 1.3.6.1.4.1.21296.1.2.1.1.1.13 | ScalarnotificationServiceAffecting | read-only | current | Information on whether this alarm is service affecting or not. |
| 1.3.6.1.4.1.21296.1.2.1.1.1.14 | ScalarnotificationAlarmCategory | read-only | current | Category of the alarm type. |
| 1.3.6.1.4.1.21296.1.2.1.1.1.15 | ScalarnotificationAdditionalDetails | read-only | current | The reply will be truncated in 128 bytes. Free string with additional relevant information provided by the system. |
| 1.3.6.1.4.1.21296.1.2.1.1.1.16 | ScalarnotificationCorrectiveAction | read-only | current | The reply will be truncated in 128 bytes. System provided information on how to correct the situation that triggered this alarm. |
| 1.3.6.1.4.1.21296.1.2.1.1.1.17 | ScalarnotificationLabel | read-only | current | The reply will be truncated in 128 bytes. User label. |
| 1.3.6.1.4.1.21296.1.2.1.1.1.18 | ScalarnotificationLastChangedTime | read-only | current | Timestamp of the last change occured in the alarm. |
| 1.3.6.1.4.1.21296.1.2.1.1.1.19 | ScalarnotificationCircuitId | read-only | current | System configured circuit ID, present in XCONs and associated facilities. For facilities, circuit-id is only filled in if an associated XCON exists. Format of … |
| 1.3.6.1.4.1.21296.1.2.1.2 | NodenotificationTrap | |||
| 1.3.6.1.4.1.21296.1.2.1.2.1 | NotificationalarmNotification | current | <description> | |
| 1.3.6.1.4.1.21296.1.2.1.3 | NodecurrentAlarms | |||
| 1.3.6.1.4.1.21296.1.2.1.3.1 | ScalarcurrentAlarmsNumberOfAlarms | read-only | current | Number of currently raised alarms. |
| 1.3.6.1.4.1.21296.1.2.1.3.2 | ScalarcurrentAlarmsLastChanged | read-only | current | Timestamp of the last change in the current alarm list (either a raise or clear event). |
| 1.3.6.1.4.1.21296.1.2.1.4 | TablealarmTable | not-accessible | current | Alarm instance that represents a raised alarm, when entry is created, or a cleared alarm, when entry is deleted. |
| 1.3.6.1.4.1.21296.1.2.1.4.1 | RowalarmEntry | not-accessible | current | Entry of alarmTable |
| 1.3.6.1.4.1.21296.1.2.1.4.1.1 | ColumnalarmId | read-only | current | Unique identifier of the alarm. Based on resource + probable cause. Note: this id is intended as an alarm identifier, but it is not intended to provide any add… |
| 1.3.6.1.4.1.21296.1.2.1.4.1.2 | ColumnalarmResource | read-only | current | Existing system resource. |
| 1.3.6.1.4.1.21296.1.2.1.4.1.3 | ColumnalarmResourceType | read-only | current | Type of resource. |
| 1.3.6.1.4.1.21296.1.2.1.4.1.4 | ColumnalarmAID | read-only | current | Resource Access Identifier (AID). Identifies an instance within a specific resource type. |
| 1.3.6.1.4.1.21296.1.2.1.4.1.5 | ColumnalarmType | read-only | current | Type of alarm, based on an abbreviated code. |
| 1.3.6.1.4.1.21296.1.2.1.4.1.6 | ColumnalarmTypeDescription | read-only | current | The reply will be truncated in 128 bytes. Human friendly description of the type of the alarm. |
| 1.3.6.1.4.1.21296.1.2.1.4.1.7 | ColumnalarmDirection | read-only | current | Direction of the alarm. |
| 1.3.6.1.4.1.21296.1.2.1.4.1.8 | ColumnalarmLocation | read-only | current | Location of the alarm. |
| 1.3.6.1.4.1.21296.1.2.1.4.1.9 | ColumnalarmPerceivedSeverity | read-only | current | Severity of the alarm. |
| 1.3.6.1.4.1.21296.1.2.1.4.1.10 | ColumnalarmReportedTime | read-only | current | Occurrence timestamp for the alarm. |
| 1.3.6.1.4.1.21296.1.2.1.4.1.11 | ColumnalarmServiceAffecting | read-only | current | Information on whether this alarm is service affecting or not. |
| 1.3.6.1.4.1.21296.1.2.1.4.1.12 | ColumnalarmCategory | read-only | current | Category of the alarm type. |
| 1.3.6.1.4.1.21296.1.2.1.4.1.13 | ColumnalarmAdditionalDetails | read-only | current | The reply will be truncated in 128 bytes. Free string with additional relevant information provided by the system. |
| 1.3.6.1.4.1.21296.1.2.1.4.1.14 | ColumnalarmCorrectiveAction | read-only | current | The reply will be truncated in 128 bytes. System provided information on how to correct the situation that triggered this alarm. |
| 1.3.6.1.4.1.21296.1.2.1.4.1.15 | ColumnalarmOperatorState | read-only | current | State of the alarm according with operator action. default value :none |
| 1.3.6.1.4.1.21296.1.2.1.4.1.16 | ColumnalarmOperatorText | read-only | current | The reply will be truncated in 128 bytes. Text provided by operator when changing alarm state. |
| 1.3.6.1.4.1.21296.1.2.1.4.1.17 | ColumnalarmOperatorName | read-only | current | The reply will be truncated in 128 bytes. Username that last changed the state of this alarm. |
| 1.3.6.1.4.1.21296.1.2.1.4.1.18 | ColumnalarmOperatorLastAction | read-only | current | Timestamp when the alarm was last changed by operator. |
| 1.3.6.1.4.1.21296.1.2.1.4.1.19 | ColumnalarmLabel | read-only | current | The reply will be truncated in 128 bytes. User label. |
| 1.3.6.1.4.1.21296.1.2.1.4.1.20 | ColumnalarmLastChangedTime | read-only | current | Timestamp of the last change occured in the alarm. |
| 1.3.6.1.4.1.21296.1.2.1.4.1.21 | ColumnalarmCircuitId | read-only | current | System configured circuit ID, present in XCONs and associated facilities. For facilities, circuit-id is only filled in if an associated XCON exists. Format of … |
| 1.3.6.1.4.1.21296.1.2.1.5 | NodealarmControl | |||
| 1.3.6.1.4.1.21296.1.2.1.5.1 | ScalaralarmControlArcBehavior | read-only | current | System wide alarm-reporting-control (ARC) behavior switch. default value :leave-alarms |
| 1.3.6.1.4.1.21296.1.2.1.5.2 | ScalaralarmControlAlarmSoakingBehavior | read-only | current | System wide alarm-soaking-behavior switch. default value :automatic |
| 1.3.6.1.4.1.21296.1.2.1.7 | NodealarmSeverityENTR | |||
| 1.3.6.1.4.1.21296.1.2.1.7.1 | TablealarmSeverityENTRTable | not-accessible | current | Individual entry in alarm-severity-profile, allows to configure the severity for one particular alarm. |
| 1.3.6.1.4.1.21296.1.2.1.7.1.1 | RowalarmSeverityENTREntry | not-accessible | current | Entry of alarmSeverityENTRTable |
| 1.3.6.1.4.1.21296.1.2.1.7.1.1.1 | ColumnalarmSeverityENTRResourceType | read-only | current | Type of resource. |
| 1.3.6.1.4.1.21296.1.2.1.7.1.1.2 | ColumnalarmSeverityENTRAlarmType | read-only | current | Type of alarm, based on an abbreviated code. |
| 1.3.6.1.4.1.21296.1.2.1.7.1.1.3 | ColumnalarmSeverityENTRDirection | read-only | current | Configured direction for the current resource type. |
| 1.3.6.1.4.1.21296.1.2.1.7.1.1.4 | ColumnalarmSeverityENTRLocation | read-only | current | Configured location for the current resource type. |
| 1.3.6.1.4.1.21296.1.2.1.7.1.1.5 | ColumnalarmSeverityENTRSeverity | read-only | current | Configured severity for the current resource type. |
| 1.3.6.1.4.1.21296.1.2.1.7.1.1.6 | ColumnalarmSeverityENTRServiceAffecting | read-only | current | Configured service affecting for the current resource type. |
| 1.3.6.1.4.1.21296.1.2.1.9 | NodealarmInventory | |||
| 1.3.6.1.4.1.21296.1.2.1.9.1 | TablealarmInventoryTable | not-accessible | current | Inventory with all possible alarm types for the system, containing static information for each alarm type. |
| 1.3.6.1.4.1.21296.1.2.1.9.1.1 | RowalarmInventoryEntry | not-accessible | current | Entry of alarmInventoryTable |
| 1.3.6.1.4.1.21296.1.2.1.9.1.1.1 | ColumnalarmInventoryAlarmType | read-only | current | Type of alarm, based on an abbreviated code. |
| 1.3.6.1.4.1.21296.1.2.1.9.1.1.2 | ColumnalarmInventoryResourceType | read-only | current | Type of resources to which this alarm applies.This is originally a YANG leaf-list, here encoded as a comma separated list of values. |
| 1.3.6.1.4.1.21296.1.2.1.9.1.1.3 | ColumnalarmInventoryAlarmCategory | read-only | current | List of possible categories of this alarm type. The same alarm may have different categories, depending on the resource-type it applies to.This is originally a… |
| 1.3.6.1.4.1.21296.1.2.1.9.1.1.4 | ColumnalarmInventoryAlarmTypeDescription | read-only | current | The reply will be truncated in 128 bytes. Human friendly description of the type of the alarm. |
| 1.3.6.1.4.1.21296.1.2.1.9.1.1.5 | ColumnalarmInventoryCorrectiveAction | read-only | current | The reply will be truncated in 128 bytes. System provided information on how to correct the situation that triggered this alarm. |
| 1.3.6.1.4.1.21296.1.2.1.9.1.1.6 | ColumnalarmInventoryDefaultSeverity | read-only | current | List of possible default severities for this alarm type. The same alarm may have different default severities depending of the resource-type it applies to.This… |
| 1.3.6.1.4.1.21296.1.2.1.9.1.1.7 | ColumnalarmInventoryServiceAffecting | read-only | current | Information on whether this alarm is service affecting or not. In some cases, the same alarm may be simultaneously 'sa' and 'nsa', depending on the resource-ty… |
| 1.3.6.1.4.1.21296.1.2.1.9.1.1.8 | ColumnalarmInventoryCanBeClearedByUser | read-only | current | Information on whether this alarm can be cleared by the user or not. default value :false |
| 1.3.6.1.4.1.21296.1.2.2 | Nodene | |||
| 1.3.6.1.4.1.21296.1.2.2.1 | NodeneInfo | |||
| 1.3.6.1.4.1.21296.1.2.2.1.1 | ScalarneId | read-only | current | The reply will be truncated in 128 bytes. Unique identifier of the NE defined by the system. |
| 1.3.6.1.4.1.21296.1.2.2.1.2 | ScalarneName | read-only | current | The reply will be truncated in 128 bytes. User assigned name for this NE. |
| 1.3.6.1.4.1.21296.1.2.2.1.3 | ScalarneLabel | read-only | current | The reply will be truncated in 128 bytes. User label. |
| 1.3.6.1.4.1.21296.1.2.2.1.4 | ScalarneType | read-only | current | Type of the NE. |
| 1.3.6.1.4.1.21296.1.2.2.1.5 | ScalarneVendor | read-only | current | Vendor name of the NE. |
| 1.3.6.1.4.1.21296.1.2.2.1.6 | ScalarneSite | read-only | current | Name or CLLI of the site where this NE is located. |
| 1.3.6.1.4.1.21296.1.2.2.1.7 | ScalarneLocation | read-only | current | The reply will be truncated in 128 bytes. Name of the location of this particular NE. |
| 1.3.6.1.4.1.21296.1.2.2.1.8 | ScalarneSubLocation | read-only | current | The reply will be truncated in 128 bytes. Name of the secondary location of this particular NE. |
| 1.3.6.1.4.1.21296.1.2.2.1.9 | ScalarneClli | read-only | current | Common Language Location Identifier (CLLI) is a 20-character standardized geographic identifier that uniquely identifies the functional category of the equipme… |
| 1.3.6.1.4.1.21296.1.2.2.1.10 | ScalarneNodeControllerChassisName | read-only | current | Configures the name of the node-controller chassis; only takes effect after the database is cleared. Needs to be a number between 1 and 254. |
| 1.3.6.1.4.1.21296.1.2.2.1.11 | ScalarneAltitude | read-only | current | Altitude of the NE. UNITS:meters |
| 1.3.6.1.4.1.21296.1.2.2.1.12 | ScalarneLatitude | read-only | current | Latitude of the NE. UNITS:degrees |
| 1.3.6.1.4.1.21296.1.2.2.1.13 | ScalarneLongitude | read-only | current | Longitude of the NE. UNITS:degrees |
| 1.3.6.1.4.1.21296.1.2.2.1.14 | ScalarneEquipmentDiscoveryReady | read-only | current | Represents the equipment discovery state for the Node Controller chassis. It will remain as 'false' until all equipment was discovered during startup. Equipmen… |
| 1.3.6.1.4.1.21296.1.2.2.1.15 | ScalarneAlarmReportReady | read-only | current | Represents the alarm monitoring state for the entire NE. It is 'true' if the alarm-report-ready flag of all chassis instances is 'true'. It is 'false' otherwis… |
| 1.3.6.1.4.1.21296.1.2.2.1.16 | ScalarneContact | read-only | current | The administrator contact information for the system. |
| 1.3.6.1.4.1.21296.1.2.2.1.17 | ScalarneRecoverMode | read-only | current | A system is in recover-mode to represent an error state that requires manual intervention. Several specific sanity checks are done during system startup, and i… |
| 1.3.6.1.4.1.21296.1.2.2.1.18 | ScalarneOriginalRecoverModeReason | read-only | current | The reply will be truncated in 128 bytes. Original reason for recover mode. Displays the original recover mode reason, available only when current reason has c… |
| 1.3.6.1.4.1.21296.1.2.2.1.19 | ScalarneRecoverModeReason | read-only | current | The reply will be truncated in 128 bytes. Reason for recover mode. Available only when ne is in recover mode. |
| 1.3.6.1.4.1.21296.1.2.2.1.20 | ScalarneOperState | read-only | current | The operational state of this object. default value :disabled |
| 1.3.6.1.4.1.21296.1.2.2.1.21 | ScalarneAvailState | read-only | current | Availability state of an entity. |
| 1.3.6.1.4.1.21296.1.2.2.1.22 | ScalarneAlarmReportControl | read-only | current | Controls the reporting of alarms for this particular object. default value :allowed |
| 1.3.6.1.4.1.21296.1.2.2.1.23 | ScalarneNodeType | read-only | current | Node Type refers to the main function NE agent operates. default value :OADM |
| 1.3.6.1.4.1.21296.1.2.2.1.25 | ScalarneL0ModeOp | read-only | current | Operation mode for Power Control and services. default value :standard |
| 1.3.6.1.4.1.21296.1.2.2.3 | NodeneFunction | |||
| 1.3.6.1.4.1.21296.1.2.2.3.1 | Nodedegree | |||
| 1.3.6.1.4.1.21296.1.2.2.3.1.1 | TabledegreeTable | not-accessible | current | List of NE Degrees. |
| 1.3.6.1.4.1.21296.1.2.2.3.1.1.1 | RowdegreeEntry | not-accessible | current | Entry of degreeTable |
| 1.3.6.1.4.1.21296.1.2.2.3.1.1.1.1 | ColumndegreeNumber | read-only | current | Degree number should be greater than zero and not greater than max-degrees. |
| 1.3.6.1.4.1.21296.1.2.2.3.1.1.1.2 | ColumndegreeLabel | read-only | current | The reply will be truncated in 128 bytes. User label. |
| 1.3.6.1.4.1.21296.1.2.2.3.1.1.1.3 | ColumndegreeSlotWidthGranularity | read-only | current | Width of a slot (measured in GHz). Conditions:../wss-less = 'false' default value :6250 |
| 1.3.6.1.4.1.21296.1.2.2.3.1.1.1.4 | ColumndegreeCenterFreqGranularity | read-only | current | Granularity of allowed center frequencies. The base frequency for this computation is 193.1 THz (G.694.1). Conditions:../wss-less = 'false' default value :3125 |
| 1.3.6.1.4.1.21296.1.2.2.3.1.1.1.5 | ColumndegreeMinSlots | read-only | current | Minimum number of slots permitted to be joined together to form a media channel. Must be less than or equal to the max-slots. Conditions:../wss-less = 'false' … |
| 1.3.6.1.4.1.21296.1.2.2.3.1.1.1.6 | ColumndegreeMaxSlots | read-only | current | Maximum number of slots permitted to be joined together to form a media channel. Must be greater than or equal to the min-slots. Conditions:../wss-less = 'fals… |
| 1.3.6.1.4.1.21296.1.2.2.3.1.1.1.7 | ColumndegreeIsFoadm | read-only | current | True if there is no WSS component at the Degree and PAx assigned to the degree appropriately. default value :false |
| 1.3.6.1.4.1.21296.1.2.2.3.1.1.1.8 | ColumndegreeWssLess | read-only | current | True if there is no WSS component in the Degree. default value :true |
| 1.3.6.1.4.1.21296.1.2.2.3.1.1.1.9 | ColumndegreeBandsSupported | read-only | current | List of bands supported by a degree, with dependence on supported cards.This is originally a YANG leaf-list, here encoded as a comma separated list of values. |
| 1.3.6.1.4.1.21296.1.2.2.3.2 | NodeconnectionPorts | |||
| 1.3.6.1.4.1.21296.1.2.2.3.2.1 | TableconnectionPortsTable | not-accessible | current | Port associated with degree: One if bi-directional; two if uni-directional. Min. and max. elements in the list is 1 in R6.0 |
| 1.3.6.1.4.1.21296.1.2.2.3.2.1.1 | RowconnectionPortsEntry | not-accessible | current | Entry of connectionPortsTable |
| 1.3.6.1.4.1.21296.1.2.2.3.2.1.1.1 | ColumnconnectionPortsIndex | read-only | current | Always 1 in GX (since dwdm-line ports are bi-directional). |
| 1.3.6.1.4.1.21296.1.2.2.3.2.1.1.2 | ColumnconnectionPortsPortName | read-only | current | The dwdm-line port of RDxx or ILAx card. As a consequence, OMS of the corresponding dwdm-port is created. |
| 1.3.6.1.4.1.21296.1.2.2.3.3 | NodemodulesDegree | |||
| 1.3.6.1.4.1.21296.1.2.2.3.3.1 | TablemodulesDegreeTable | not-accessible | current | List of cards/ subcards/ modules involved in degree: modules listed here must be listed as 'possibleDegrees'. |
| 1.3.6.1.4.1.21296.1.2.2.3.3.1.1 | RowmodulesDegreeEntry | not-accessible | current | Entry of modulesDegreeTable |
| 1.3.6.1.4.1.21296.1.2.2.3.3.1.1.1 | ColumnmodulesDegreeIndex | read-only | current | Card with index 1 should be the card/ subcard/ module with DWDM line interface. Card with index 2 is only applicable to BAXOFP2, when card-mode = 'degree'. Ind… |
| 1.3.6.1.4.1.21296.1.2.2.3.3.1.1.2 | ColumnmodulesDegreeSupportedCard | read-only | current | Instance of card or subcard that belongs to degree. |
| 1.3.6.1.4.1.21296.1.2.2.3.3.1.1.3 | ColumnmodulesDegreeRoadmBandwidth | read-only | current | ROADM bandwidth cascading type. default value :not-applicable |
| 1.3.6.1.4.1.21296.1.2.2.3.3.1.1.4 | ColumnmodulesDegreeSupportedRail | read-only | current | Instance of rail that belongs to this modules-degree. |
| 1.3.6.1.4.1.21296.1.2.2.3.4 | Nodeadg | |||
| 1.3.6.1.4.1.21296.1.2.2.3.4.1 | TableadgTable | not-accessible | current | List of ADGs - Add/ Drop Group(s) |
| 1.3.6.1.4.1.21296.1.2.2.3.4.1.1 | RowadgEntry | not-accessible | current | Entry of adgTable |
| 1.3.6.1.4.1.21296.1.2.2.3.4.1.1.1 | ColumnadgNumber | read-only | current | ADG identifier as a number. |
| 1.3.6.1.4.1.21296.1.2.2.3.4.1.1.2 | ColumnadgLabel | read-only | current | The reply will be truncated in 128 bytes. User label. |
| 1.3.6.1.4.1.21296.1.2.2.3.4.1.1.3 | ColumnadgMaxAddDropPorts | read-only | current | The max number of ports available for a given ADG. |
| 1.3.6.1.4.1.21296.1.2.2.3.4.1.1.4 | ColumnadgWavelengthDuplication | read-only | current | Whether the SRG can handle duplicate wavelengths and if so to what extent. |
| 1.3.6.1.4.1.21296.1.2.2.3.4.1.1.5 | ColumnadgBandsSupported | read-only | current | List of bands supported by an ADG, with dependence on supported cards.This is originally a YANG leaf-list, here encoded as a comma separated list of values. |
| 1.3.6.1.4.1.21296.1.2.2.3.5 | NodemodulesAdg | |||
| 1.3.6.1.4.1.21296.1.2.2.3.5.1 | TablemodulesAdgTable | not-accessible | current | List of cards/ subcards/ modules involved in ADG, for informational purposes. |
| 1.3.6.1.4.1.21296.1.2.2.3.5.1.1 | RowmodulesAdgEntry | not-accessible | current | Entry of modulesAdgTable |
| 1.3.6.1.4.1.21296.1.2.2.3.5.1.1.1 | ColumnmodulesAdgIndex | read-only | current | Card with index 1 should be the card/ subcard/ module fibered to the Degree(s). |
| 1.3.6.1.4.1.21296.1.2.2.3.5.1.1.2 | ColumnmodulesAdgSupportedCard | read-only | current | Instance of the card for the ADG. |
| 1.3.6.1.4.1.21296.1.2.2.3.5.1.1.3 | ColumnmodulesAdgOcmMonitoring | read-only | current | 'true' if monitoring is provided by the Degree, or CD-AD structure; 'false' otherwise. default value :true |
| 1.3.6.1.4.1.21296.1.2.2.3.6 | Nodedirection | |||
| 1.3.6.1.4.1.21296.1.2.2.3.6.1 | TabledirectionTable | not-accessible | current | List of NE direction(s). |
| 1.3.6.1.4.1.21296.1.2.2.3.6.1.1 | RowdirectionEntry | not-accessible | current | Entry of directionTable |
| 1.3.6.1.4.1.21296.1.2.2.3.6.1.1.1 | ColumndirectionIndex | read-only | current | Direction index. |
| 1.3.6.1.4.1.21296.1.2.2.3.6.1.1.2 | ColumndirectionLabel | read-only | current | The reply will be truncated in 128 bytes. User label. |
| 1.3.6.1.4.1.21296.1.2.2.3.6.1.1.3 | ColumndirectionNumber | read-only | current | Direction is 1 or 2 depending on port. default value :1 |
| 1.3.6.1.4.1.21296.1.2.2.3.6.1.1.4 | ColumndirectionCard | read-only | current | Card Instance that belongs to this direction (index). |
| 1.3.6.1.4.1.21296.1.2.2.3.6.1.1.5 | ColumndirectionPort | read-only | current | Instance of the card's port hosting this direction (index). |
| 1.3.6.1.4.1.21296.1.2.2.3.7 | NodeaseIdlerService | |||
| 1.3.6.1.4.1.21296.1.2.2.3.7.1 | TableaseIdlerServiceTable | not-accessible | current | ASE Idler specific attributes. |
| 1.3.6.1.4.1.21296.1.2.2.3.7.1.1 | RowaseIdlerServiceEntry | not-accessible | current | Entry of aseIdlerServiceTable |
| 1.3.6.1.4.1.21296.1.2.2.3.7.1.1.1 | ColumnaseIdlerServiceName | read-only | current | Name of ase-idler-service. |
| 1.3.6.1.4.1.21296.1.2.2.3.7.1.1.2 | ColumnaseIdlerServiceSupportingCard | read-only | current | Card that holds thiS. |
| 1.3.6.1.4.1.21296.1.2.2.3.7.1.1.3 | ColumnaseIdlerServiceAseIdlerState | read-only | current | ASE Idler state. Conditions:/ne/l0-mode-op='slte' or /ne/l0-mode-op='hsc-ols' default value :ase-disabled |
| 1.3.6.1.4.1.21296.1.2.2.3.7.1.1.4 | ColumnaseIdlerServiceAseIdlerEnable | read-only | current | ASE Idler enabled: system will autofill the empty part of the spectrum and failed channels with ASE Idler signal. default value :disabled |
| 1.3.6.1.4.1.21296.1.2.2.3.7.1.1.5 | ColumnaseIdlerServiceOperState | read-only | current | The operational state of this object. default value :disabled |
| 1.3.6.1.4.1.21296.1.2.2.3.7.1.1.6 | ColumnaseIdlerServiceAvailState | read-only | current | Availability state of an entity. |
| 1.3.6.1.4.1.21296.1.2.2.3.7.1.1.7 | ColumnaseIdlerServiceAlarmReportControl | read-only | current | Controls the reporting of alarms for this particular object. default value :allowed |
| 1.3.6.1.4.1.21296.1.2.2.3.7.1.1.8 | ColumnaseIdlerServiceAID | read-only | current | Resource Access Identifier (AID). Identifies an instance within a specific resource type. |
| 1.3.6.1.4.1.21296.1.2.2.3.7.1.1.9 | ColumnaseIdlerServiceFunction | read-only | current | Which NE function the ne-function object works as. |
| 1.3.6.1.4.1.21296.1.2.2.3.8 | Noderail | |||
| 1.3.6.1.4.1.21296.1.2.2.3.8.1 | TablerailTable | not-accessible | current | List of rails, each aggregating a pair of dwdm-line ports and their amplifiers. |
| 1.3.6.1.4.1.21296.1.2.2.3.8.1.1 | RowrailEntry | not-accessible | current | Entry of railTable |
| 1.3.6.1.4.1.21296.1.2.2.3.8.1.1.1 | ColumnrailName | read-only | current | Rail identifier. |
| 1.3.6.1.4.1.21296.1.2.2.3.8.1.1.2 | ColumnrailAID | read-only | current | Resource Access Identifier (AID). Identifies an instance within a specific resource type. |
| 1.3.6.1.4.1.21296.1.2.2.3.8.1.1.3 | ColumnrailSupportingCard | read-only | current | Card that holds this rail. |
| 1.3.6.1.4.1.21296.1.2.2.3.8.1.1.4 | ColumnrailSupportingPort | read-only | current | The dwdm-line ports belonging to this rail.This is originally a YANG leaf-list, here encoded as a comma separated list of values. |
| 1.3.6.1.4.1.21296.1.2.2.3.8.1.1.5 | ColumnrailSupportingFunction | read-only | current | The functions belonging to this rail.This is originally a YANG leaf-list, here encoded as a comma separated list of values. |
| 1.3.6.1.4.1.21296.1.2.2.3.8.1.1.6 | ColumnrailOperatingMode | read-only | current | Rail operating mode. |
| 1.3.6.1.4.1.21296.1.2.2.4 | NodesystemPolicies | |||
| 1.3.6.1.4.1.21296.1.2.2.4.1 | ScalarsystemPoliciesCommitTracking | read-only | current | Enables the commit-repository feature. With this feature enabled, all configuration changes done via running or candidate datastores are stored as commit-recor… |
| 1.3.6.1.4.1.21296.1.2.2.4.2 | ScalarsystemPoliciesWritableRunning | read-only | current | Disabling writable-running policy makes it impossible to do config commands via running datastore, making it mandatory to use the candidate datastore. This imp… |
| 1.3.6.1.4.1.21296.1.2.2.5 | NodeextendedConfig | |||
| 1.3.6.1.4.1.21296.1.2.2.5.1 | TableextendedConfigTable | not-accessible | current | Allows user to configure a non-standard extended config. This introduces exceptional behavior globally in the system, and requires the knowledge of the extende… |
| 1.3.6.1.4.1.21296.1.2.2.5.1.1 | RowextendedConfigEntry | not-accessible | current | Entry of extendedConfigTable |
| 1.3.6.1.4.1.21296.1.2.2.5.1.1.1 | ColumnextendedConfigName | read-only | current | The extended-config name. Needs to match name known by the system. |
| 1.3.6.1.4.1.21296.1.2.2.5.1.1.2 | ColumnextendedConfigDescription | read-only | current | The reply will be truncated in 128 bytes. System provided description of the extended-config and its effect in the system. |
| 1.3.6.1.4.1.21296.1.2.3 | Nodeequipment | |||
| 1.3.6.1.4.1.21296.1.2.3.2 | Nodechassis | |||
| 1.3.6.1.4.1.21296.1.2.3.2.1 | TablechassisTable | not-accessible | current | Chassis configuration and state. |
| 1.3.6.1.4.1.21296.1.2.3.2.1.1 | RowchassisEntry | not-accessible | current | Entry of chassisTable |
| 1.3.6.1.4.1.21296.1.2.3.2.1.1.1 | ColumnchassisName | read-only | current | Chassis name. |
| 1.3.6.1.4.1.21296.1.2.3.2.1.1.2 | ColumnchassisIsNodeController | read-only | current | Tells if this chassis the node controller of this NE. |
| 1.3.6.1.4.1.21296.1.2.3.2.1.1.3 | ColumnchassisAliasName | read-only | current | The reply will be truncated in 128 bytes. User defined alias for this entity. Must be an alphanumeric string with dash or underscore. |
| 1.3.6.1.4.1.21296.1.2.3.2.1.1.4 | ColumnchassisAID | read-only | current | Resource Access Identifier (AID). Identifies an instance within a specific resource type. |
| 1.3.6.1.4.1.21296.1.2.3.2.1.1.5 | ColumnchassisAdminState | read-only | current | The administrative state of the managed object. default value :unlock |
| 1.3.6.1.4.1.21296.1.2.3.2.1.1.6 | ColumnchassisOperState | read-only | current | The operational state of this object. default value :disabled |
| 1.3.6.1.4.1.21296.1.2.3.2.1.1.7 | ColumnchassisAvailState | read-only | current | Availability state of an entity. |
| 1.3.6.1.4.1.21296.1.2.3.2.1.1.8 | ColumnchassisAlarmReportControl | read-only | current | Controls the reporting of alarms for this particular object. default value :allowed |
| 1.3.6.1.4.1.21296.1.2.3.2.1.1.9 | ColumnchassisLabel | read-only | current | The reply will be truncated in 128 bytes. User label. |
| 1.3.6.1.4.1.21296.1.2.3.2.1.1.10 | ColumnchassisRequiredType | read-only | current | Chassis type. |
| 1.3.6.1.4.1.21296.1.2.3.2.1.1.11 | ColumnchassisLocation | read-only | current | User defined location |
| 1.3.6.1.4.1.21296.1.2.3.2.1.1.12 | ColumnchassisRackName | read-only | current | User defined rack name (withing the location) |
| 1.3.6.1.4.1.21296.1.2.3.2.1.1.13 | ColumnchassisPositionInRack | read-only | current | Position of the chassis within the rack. |
| 1.3.6.1.4.1.21296.1.2.3.2.1.1.14 | ColumnchassisExpectedPemType | read-only | current | Defines what is the expected type of PEMs that this chassis will have. It is not possible to configure each PEM slot individually, as all PEMs need to be of th… |
| 1.3.6.1.4.1.21296.1.2.3.2.1.1.15 | ColumnchassisExpectedFanType | read-only | current | Defines what is the expected type of FANs that this chassis will have. It is not possible to configure each FAN slot individually, this needs to be done at the… |
| 1.3.6.1.4.1.21296.1.2.3.2.1.1.16 | ColumnchassisPemUnderVoltageThreshold | read-only | current | Under voltage threshold on PEM input feed. UNITS:volt |
| 1.3.6.1.4.1.21296.1.2.3.2.1.1.17 | ColumnchassisPemOverVoltageThreshold | read-only | current | Over voltage threshold on PEM input feed. UNITS:volt |
| 1.3.6.1.4.1.21296.1.2.3.2.1.1.21 | ColumnchassisConfiguredAmbientTemperature | read-only | current | Configured ambient temperature for the chassis, used to compute the FRU's power consumption. UNITS:Celsius |
| 1.3.6.1.4.1.21296.1.2.3.2.1.1.22 | ColumnchassisPowerRedundancy | read-only | current | Configuration of the PEM redundancy mode. default value :one-plus-one |
| 1.3.6.1.4.1.21296.1.2.3.2.1.1.23 | ColumnchassisNoSwitchover | read-only | current | If enabled, the standby controller will be locked out from taking over the active card. This means no manual or autonomous switchovers will happen. default val… |
| 1.3.6.1.4.1.21296.1.2.3.2.1.1.24 | ColumnchassisActiveControllerSlot | read-only | current | Identifies the active controller slot name. A change to this attribute implies a switchover has happened. default value :none |
| 1.3.6.1.4.1.21296.1.2.3.2.1.1.25 | ColumnchassisRole | read-only | current | Identifies the role of the chassis in a multi-chassis NE. default value :unknown |
| 1.3.6.1.4.1.21296.1.2.3.2.1.1.26 | ColumnchassisExpectedSerialNumber | read-only | current | Inform the NC the serial number of a sub-chassis. For the main-chassis, the value is auto-filled with its own serial number |
| 1.3.6.1.4.1.21296.1.2.3.2.1.1.27 | ColumnchassisEquipmentDiscoveryReady | read-only | current | Represents the equipment discovery state for the current chassis. It will remain as 'false' until all equipment was discovered during startup. Equipment added … |
| 1.3.6.1.4.1.21296.1.2.3.2.1.1.28 | ColumnchassisAlarmReportReady | read-only | current | Represents the alarm monitoring state for this chassis. After a system restart, alarms are kept persistent for a grace minute period, after which they will be … |
| 1.3.6.1.4.1.21296.1.2.3.2.1.1.29 | ColumnchassisRequiredSubtype | read-only | current | The subtype of the chassis |
| 1.3.6.1.4.1.21296.1.2.3.2.1.1.30 | ColumnchassisFilterMaintenanceInterval | read-only | current | Configuration for the filter replacement. When the configured time interval expires, system reports an alarm indicating that dust filter needs to be replaced. … |
| 1.3.6.1.4.1.21296.1.2.3.2.1.1.31 | ColumnchassisFilterInsertionDate | read-only | current | Filter insertion date, if applicable. Conditions:../filter-maintenance-interval != 'never' default value :never |
| 1.3.6.1.4.1.21296.1.2.3.2.1.1.32 | ColumnchassisTotalAvailablePower | read-only | current | Total available power at the chassis level, considering the power provided by all enabled PEMs and the power-redundancy mode. |
| 1.3.6.1.4.1.21296.1.2.3.2.1.1.33 | ColumnchassisActualPowerDraw | read-only | current | Real time actual power draw. Same as chassis real-time PM parameter 'actual-power-draw'. |
| 1.3.6.1.4.1.21296.1.2.3.2.1.1.34 | ColumnchassisReservedPowerDraw | read-only | current | Theoretical worst case total power draw of the chassis that includes all equipment operating at their max power. |
| 1.3.6.1.4.1.21296.1.2.3.2.1.1.35 | ColumnchassisActualPowerDrawAlarmThreshold | read-only | current | Threshold for raising the PWRDRAW alarm, in percentage. The alarm is raised if: actual-power-draw > (total-available-power * actual-power-draw-alarm-threshold)… |
| 1.3.6.1.4.1.21296.1.2.3.2.1.1.36 | ColumnchassisPowerLimited | read-only | current | Limit the chassis power consumption by reducing max fan speed default value :false |
| 1.3.6.1.4.1.21296.1.2.3.2.1.1.37 | ColumnchassisPassiveShelfDetection | read-only | current | Enable passive shelf detection for this chassis. default value :false |
| 1.3.6.1.4.1.21296.1.2.3.2.1.1.38 | ColumnchassisPreferredControllerSlot | read-only | current | When set to a controller slot name, the system uses revertive behavior: after switchover leaves the active role on a non-preferred controller, it will switch b… |
| 1.3.6.1.4.1.21296.1.2.3.3 | Nodeinventory | |||
| 1.3.6.1.4.1.21296.1.2.3.3.1 | TableinventoryTable | not-accessible | current | Inventory data for a present FRU. |
| 1.3.6.1.4.1.21296.1.2.3.3.1.1 | RowinventoryEntry | not-accessible | current | Entry of inventoryTable |
| 1.3.6.1.4.1.21296.1.2.3.3.1.1.1 | ColumninventoryHardwareVersion | read-only | current | Hardware version of this FRU. |
| 1.3.6.1.4.1.21296.1.2.3.3.1.1.2 | ColumninventoryActualType | read-only | current | FRU type of actual equipment. |
| 1.3.6.1.4.1.21296.1.2.3.3.1.1.3 | ColumninventoryActualSubtype | read-only | current | FRU subtype of actual equipment - only available if applicable. |
| 1.3.6.1.4.1.21296.1.2.3.3.1.1.4 | ColumninventorySwSupportRevision | read-only | current | Software revision currently installed. default value :0 |
| 1.3.6.1.4.1.21296.1.2.3.3.1.1.5 | ColumninventoryPON | read-only | current | Current PON of the equipment. |
| 1.3.6.1.4.1.21296.1.2.3.3.1.1.6 | ColumninventorySerialNumber | read-only | current | Serial number of the equipment. |
| 1.3.6.1.4.1.21296.1.2.3.3.1.1.7 | ColumninventoryClei | read-only | current | Common Language Equipment Identifier. |
| 1.3.6.1.4.1.21296.1.2.3.3.1.1.8 | ColumninventoryVendor | read-only | current | Vendor of this equipment. |
| 1.3.6.1.4.1.21296.1.2.3.3.1.1.9 | ColumninventoryPartNumber | read-only | current | Part number for this equipment. |
| 1.3.6.1.4.1.21296.1.2.3.3.1.1.10 | ColumninventoryManufactureDate | read-only | current | Manufacture Date in a date-time format (YYYY-MM-DDThh:mm:ssZ) or 'NA' if not available. |
| 1.3.6.1.4.1.21296.1.2.3.3.1.1.11 | ColumninventoryInsertionDate | read-only | current | Insertion Date in a date-time format (YYYY-MM-DDThh:mm:ssZ) or 'NA' if not available. |
| 1.3.6.1.4.1.21296.1.2.3.3.1.1.12 | ColumninventoryNumberOfLanes | read-only | current | When applicatible, provides number of supported optical lanes in this equipment. |
| 1.3.6.1.4.1.21296.1.2.3.3.1.1.13 | ColumninventoryFwStatus | read-only | current | Summary status for all the firmware for this card. default value :not-applicable |
| 1.3.6.1.4.1.21296.1.2.3.3.1.1.14 | ColumninventoryVendorComplianceCode | read-only | current | Vendor Compliance Code information for 3rd party TOMs. |
| 1.3.6.1.4.1.21296.1.2.3.3.1.1.15 | ColumninventorySubInventory | read-only | current | The reply will be truncated in 128 bytes. For TOM-adapter, this holds the information of the plugged-in equipment to the adapter. |
| 1.3.6.1.4.1.21296.1.2.3.3.1.1.16 | ColumninventoryActualPowerClass | read-only | current | Power class reported by the pluggable (for example from module management data), when available. Only populated for third-party transceiver subtypes on hosts t… |
| 1.3.6.1.4.1.21296.1.2.3.3.1.1.17 | ColumninventoryActualMaxPowerDraw | read-only | current | Maximum power draw indicated by the pluggable for the reported power class, when available. Populated under the same conditions as actual-power-class. |
| 1.3.6.1.4.1.21296.1.2.3.4 | NodecurrentFw | |||
| 1.3.6.1.4.1.21296.1.2.3.4.1 | TablecurrentFwTable | not-accessible | current | List of current firmware available in the card. |
| 1.3.6.1.4.1.21296.1.2.3.4.1.1 | RowcurrentFwEntry | not-accessible | current | Entry of currentFwTable |
| 1.3.6.1.4.1.21296.1.2.3.4.1.1.1 | ColumncurrentFwFwName | read-only | current | Name of the firmware. |
| 1.3.6.1.4.1.21296.1.2.3.4.1.1.2 | ColumncurrentFwFwVersion | read-only | current | Current version of the firmware. |
| 1.3.6.1.4.1.21296.1.2.3.4.1.1.3 | ColumncurrentFwExpectedFwVersion | read-only | current | Expected version of the firmware. |
| 1.3.6.1.4.1.21296.1.2.3.4.1.1.4 | ColumncurrentFwFwStatus | read-only | current | Status for this particular firmware. default value :unavailable |
| 1.3.6.1.4.1.21296.1.2.3.5 | Nodeslot | |||
| 1.3.6.1.4.1.21296.1.2.3.5.1 | TableslotTable | not-accessible | current | Slot equipment holder details. |
| 1.3.6.1.4.1.21296.1.2.3.5.1.1 | RowslotEntry | not-accessible | current | Entry of slotTable |
| 1.3.6.1.4.1.21296.1.2.3.5.1.1.1 | ColumnslotName | read-only | current | Slot name. |
| 1.3.6.1.4.1.21296.1.2.3.5.1.1.2 | ColumnslotAID | read-only | current | Resource Access Identifier (AID). Identifies an instance within a specific resource type. |
| 1.3.6.1.4.1.21296.1.2.3.5.1.1.3 | ColumnslotSupportedType | read-only | current | List of supported types in this equipment holder. If a specific type is provisioned, the list has only that type.This is originally a YANG leaf-list, here enco… |
| 1.3.6.1.4.1.21296.1.2.3.5.1.1.4 | ColumnslotInstalledType | read-only | current | Currently installed type in this equipment holder. If empty, means no FRU is present. |
| 1.3.6.1.4.1.21296.1.2.3.5.1.1.5 | ColumnslotOperState | read-only | current | The operational state of this object. default value :disabled |
| 1.3.6.1.4.1.21296.1.2.3.5.1.1.6 | ColumnslotAvailState | read-only | current | Availability state of an entity. |
| 1.3.6.1.4.1.21296.1.2.3.5.1.1.7 | ColumnslotCurrentEquipment | read-only | current | Name of the equipment that is currently required in this slot. |
| 1.3.6.1.4.1.21296.1.2.3.6 | Nodecard | |||
| 1.3.6.1.4.1.21296.1.2.3.6.1 | TablecardTable | not-accessible | current | Card base object.This object has parameters that are common to all existing card types (controller, fan, etc). |
| 1.3.6.1.4.1.21296.1.2.3.6.1.1 | RowcardEntry | not-accessible | current | Entry of cardTable |
| 1.3.6.1.4.1.21296.1.2.3.6.1.1.1 | ColumncardName | read-only | current | Card identifier. |
| 1.3.6.1.4.1.21296.1.2.3.6.1.1.2 | ColumncardRequiredType | read-only | current | Required card type. |
| 1.3.6.1.4.1.21296.1.2.3.6.1.1.3 | ColumncardRequiredSubtype | read-only | current | The subtype of the card |
| 1.3.6.1.4.1.21296.1.2.3.6.1.1.4 | ColumncardCategory | read-only | current | Card category. |
| 1.3.6.1.4.1.21296.1.2.3.6.1.1.5 | ColumncardChassisName | read-only | current | Chassis where this card is located. |
| 1.3.6.1.4.1.21296.1.2.3.6.1.1.6 | ColumncardSlotName | read-only | current | Slot where this card is located. |
| 1.3.6.1.4.1.21296.1.2.3.6.1.1.7 | ColumncardMaxPowerDraw | read-only | current | Maximum power draw for this card. |
| 1.3.6.1.4.1.21296.1.2.3.6.1.1.8 | ColumncardLastRebootReason | read-only | current | Reason why the last reboot was done. |
| 1.3.6.1.4.1.21296.1.2.3.6.1.1.9 | ColumncardAliasName | read-only | current | The reply will be truncated in 128 bytes. User defined alias for this entity. Must be an alphanumeric string with dash or underscore. |
| 1.3.6.1.4.1.21296.1.2.3.6.1.1.10 | ColumncardAID | read-only | current | Resource Access Identifier (AID). Identifies an instance within a specific resource type. |
| 1.3.6.1.4.1.21296.1.2.3.6.1.1.11 | ColumncardAdminState | read-only | current | The administrative state of the managed object. default value :unlock |
| 1.3.6.1.4.1.21296.1.2.3.6.1.1.12 | ColumncardOperState | read-only | current | The operational state of this object. default value :disabled |
| 1.3.6.1.4.1.21296.1.2.3.6.1.1.13 | ColumncardAvailState | read-only | current | Availability state of an entity. |
| 1.3.6.1.4.1.21296.1.2.3.6.1.1.14 | ColumncardAlarmReportControl | read-only | current | Controls the reporting of alarms for this particular object. default value :allowed |
| 1.3.6.1.4.1.21296.1.2.3.6.1.1.15 | ColumncardLabel | read-only | current | The reply will be truncated in 128 bytes. User label. |
| 1.3.6.1.4.1.21296.1.2.3.6.1.1.16 | ColumncardMode | read-only | current | The configured card-mode, identifies specific card functionality. |
| 1.3.6.1.4.1.21296.1.2.3.6.1.1.17 | ColumncardSubslotName | read-only | current | Subslot where this card is located, e.g. 1-2.3 (slot 2, subslot 3). 'subslot-name' can only be set on (sub)card creation. |
| 1.3.6.1.4.1.21296.1.2.3.6.1.1.18 | ColumncardPowerProfile | read-only | current | User configured power draw for this card. |
| 1.3.6.1.4.1.21296.1.2.3.6.1.1.19 | ColumncardParentCard | read-only | current | Name of the parent card, only applicable for subcard(s). |
| 1.3.6.1.4.1.21296.1.2.3.6.1.1.20 | ColumncardSubcardList | read-only | current | List of sub-cards associated with this card. Only applicable for carrier cards.This is originally a YANG leaf-list, here encoded as a comma separated list of v… |
| 1.3.6.1.4.1.21296.1.2.3.6.1.1.21 | ColumncardLastRebootTime | read-only | current | Timestamp of the last reboot event of a card. |
| 1.3.6.1.4.1.21296.1.2.3.7 | NodecontrollerCard | |||
| 1.3.6.1.4.1.21296.1.2.3.7.1 | TablecontrollerCardTable | not-accessible | current | Container of parameters related with controller cards. |
| 1.3.6.1.4.1.21296.1.2.3.7.1.1 | RowcontrollerCardEntry | not-accessible | current | Entry of controllerCardTable |
| 1.3.6.1.4.1.21296.1.2.3.7.1.1.1 | ColumncontrollerCardRedundancyStatus | read-only | current | Controller state. default value :not-in-service |
| 1.3.6.1.4.1.21296.1.2.3.7.1.1.2 | ColumncontrollerCardRedundancyStandbyStatus | read-only | current | State of the controller redundancy. default value :not-ready-synchronizing |
| 1.3.6.1.4.1.21296.1.2.3.7.1.1.3 | ColumncontrollerCardNumberOfSwitchoverEvents | read-only | current | Number of times that an active controller card has switchover. Value only visibile on active controller card. |
| 1.3.6.1.4.1.21296.1.2.3.7.1.1.4 | ColumncontrollerCardTimeOfLastSwitchover | read-only | current | Timestamp of the last controller switchover event. Value only visible on active controller card. |
| 1.3.6.1.4.1.21296.1.2.3.7.1.1.5 | ColumncontrollerCardAdditionalDetails | read-only | current | Additional details for synchronization status. |
| 1.3.6.1.4.1.21296.1.2.3.8 | Nodeproperty | |||
| 1.3.6.1.4.1.21296.1.2.3.8.1 | TablepropertyTable | not-accessible | current | Type specific property, auto instanciated by the system, but configurable by the user. |
| 1.3.6.1.4.1.21296.1.2.3.8.1.1 | RowpropertyEntry | not-accessible | current | Entry of propertyTable |
| 1.3.6.1.4.1.21296.1.2.3.8.1.1.1 | ColumnpropertyName | read-only | current | Name of the property. |
| 1.3.6.1.4.1.21296.1.2.3.8.1.1.2 | ColumnpropertyValue | read-only | current | Value of the property. Will always be a 'string', even if it corresponds to a number or other type. |
| 1.3.6.1.4.1.21296.1.2.3.8.1.1.3 | ColumnpropertyDescription | read-only | current | The reply will be truncated in 128 bytes. Description of this property, including type restrictions. |
| 1.3.6.1.4.1.21296.1.2.3.9 | Nodeport | |||
| 1.3.6.1.4.1.21296.1.2.3.9.1 | TableportTable | not-accessible | current | Generic card port. |
| 1.3.6.1.4.1.21296.1.2.3.9.1.1 | RowportEntry | not-accessible | current | Entry of portTable |
| 1.3.6.1.4.1.21296.1.2.3.9.1.1.1 | ColumnportName | read-only | current | Port name. |
| 1.3.6.1.4.1.21296.1.2.3.9.1.1.2 | ColumnportAliasName | read-only | current | The reply will be truncated in 128 bytes. User defined alias for this entity. Must be an alphanumeric string with dash or underscore. |
| 1.3.6.1.4.1.21296.1.2.3.9.1.1.3 | ColumnportAID | read-only | current | Resource Access Identifier (AID). Identifies an instance within a specific resource type. |
| 1.3.6.1.4.1.21296.1.2.3.9.1.1.4 | ColumnportAdminState | read-only | current | The administrative state of the managed object. default value :unlock |
| 1.3.6.1.4.1.21296.1.2.3.9.1.1.5 | ColumnportOperState | read-only | current | The operational state of this object. default value :disabled |
| 1.3.6.1.4.1.21296.1.2.3.9.1.1.6 | ColumnportAvailState | read-only | current | Availability state of an entity. |
| 1.3.6.1.4.1.21296.1.2.3.9.1.1.7 | ColumnportAlarmReportControl | read-only | current | Controls the reporting of alarms for this particular object. default value :allowed |
| 1.3.6.1.4.1.21296.1.2.3.9.1.1.8 | ColumnportLabel | read-only | current | The reply will be truncated in 128 bytes. User label. |
| 1.3.6.1.4.1.21296.1.2.3.9.1.1.9 | ColumnportType | read-only | current | The port type. Each port type supports different features and services. |
| 1.3.6.1.4.1.21296.1.2.3.9.1.1.10 | ColumnportHostedInterface | read-only | current | Top level interface hosted in this port. |
| 1.3.6.1.4.1.21296.1.2.3.9.1.1.11 | ColumnportSupportedType | read-only | current | List of supported types in this equipment holder. If a specific type is provisioned, the list has only that type.This is originally a YANG leaf-list, here enco… |
| 1.3.6.1.4.1.21296.1.2.3.9.1.1.12 | ColumnportInstalledType | read-only | current | Currently installed type in this equipment holder. If empty, means no FRU is present. |
| 1.3.6.1.4.1.21296.1.2.3.9.1.1.13 | ColumnportConnectedTo | read-only | current | Indicate neighbour port entity to which the current port is connected to. This is not validated by the NE and can be used by the customers (or NMS) for topolog… |
| 1.3.6.1.4.1.21296.1.2.3.9.1.1.14 | ColumnportParentPort | read-only | current | Name of the parent port. Only applicable for sub-ports. |
| 1.3.6.1.4.1.21296.1.2.3.9.1.1.15 | ColumnportSubportList | read-only | current | List of sub-ports associated with this port. Only applicable when this port is a parent port.This is originally a YANG leaf-list, here encoded as a comma separ… |
| 1.3.6.1.4.1.21296.1.2.3.9.1.1.16 | ColumnportDirection | read-only | current | Direction of the port. default value :not-applicable |
| 1.3.6.1.4.1.21296.1.2.3.9.1.1.17 | ColumnportExternalConnectivity | read-only | current | Indicates whether the port is connected or to be connected externally or not. default value :no |
| 1.3.6.1.4.1.21296.1.2.3.9.1.1.18 | ColumnportDiverseRouting | read-only | current | Controls enabling/disabling of diverse routing capability. default value :false |
| 1.3.6.1.4.1.21296.1.2.3.9.1.1.19 | ColumnportUsage | read-only | current | Port usage type. Only applicable for line-side ports. default value :normal |
| 1.3.6.1.4.1.21296.1.2.3.10 | Nodetom | |||
| 1.3.6.1.4.1.21296.1.2.3.10.1 | TabletomTable | not-accessible | current | TOM (Transceiver Optical Module) pluggable information. |
| 1.3.6.1.4.1.21296.1.2.3.10.1.1 | RowtomEntry | not-accessible | current | Entry of tomTable |
| 1.3.6.1.4.1.21296.1.2.3.10.1.1.1 | ColumntomRequiredType | read-only | current | The type of the TOM. |
| 1.3.6.1.4.1.21296.1.2.3.10.1.1.2 | ColumntomRequiredSubtype | read-only | current | The subtype of the TOM. |
| 1.3.6.1.4.1.21296.1.2.3.10.1.1.3 | ColumntomPhyMode | read-only | current | Configured Phy Mode. |
| 1.3.6.1.4.1.21296.1.2.3.10.1.1.4 | ColumntomSupportedPhyModes | read-only | current | List of supported Phy Modes by this TOM type.This is originally a YANG leaf-list, here encoded as a comma separated list of values. |
| 1.3.6.1.4.1.21296.1.2.3.10.1.1.5 | ColumntomAliasName | read-only | current | The reply will be truncated in 128 bytes. User defined alias for this entity. Must be an alphanumeric string with dash or underscore. |
| 1.3.6.1.4.1.21296.1.2.3.10.1.1.6 | ColumntomAID | read-only | current | Resource Access Identifier (AID). Identifies an instance within a specific resource type. |
| 1.3.6.1.4.1.21296.1.2.3.10.1.1.7 | ColumntomAdminState | read-only | current | The administrative state of the managed object. default value :unlock |
| 1.3.6.1.4.1.21296.1.2.3.10.1.1.8 | ColumntomOperState | read-only | current | The operational state of this object. default value :disabled |
| 1.3.6.1.4.1.21296.1.2.3.10.1.1.9 | ColumntomAvailState | read-only | current | Availability state of an entity. |
| 1.3.6.1.4.1.21296.1.2.3.10.1.1.10 | ColumntomAlarmReportControl | read-only | current | Controls the reporting of alarms for this particular object. default value :allowed |
| 1.3.6.1.4.1.21296.1.2.3.10.1.1.11 | ColumntomLabel | read-only | current | The reply will be truncated in 128 bytes. User label. |
| 1.3.6.1.4.1.21296.1.2.3.10.1.1.12 | ColumntomEnableSerdes | read-only | current | Controls enabling/disabling of configuring TOM SerDes. default value :false |
| 1.3.6.1.4.1.21296.1.2.3.10.1.1.13 | ColumntomPowerClassOverride | read-only | current | Used to override the power class for 3rd party TOM. |
| 1.3.6.1.4.1.21296.1.2.3.10.1.1.14 | ColumntomUpgradeStatus | read-only | current | Current upgrade status. default value :idle |
| 1.3.6.1.4.1.21296.1.2.3.10.1.1.16 | ColumntomPowerMode | read-only | current | Used to force the client port into a power-mode to control the power consumption of unused TOM. default value :powered |
| 1.3.6.1.4.1.21296.1.2.3.11 | Nodeserdes | |||
| 1.3.6.1.4.1.21296.1.2.3.11.1 | TableserdesTable | not-accessible | current | The user configured (or overridden) set of serializer/desserializer. |
| 1.3.6.1.4.1.21296.1.2.3.11.1.1 | RowserdesEntry | not-accessible | current | Entry of serdesTable |
| 1.3.6.1.4.1.21296.1.2.3.11.1.1.1 | ColumnserdesName | read-only | current | The reply will be truncated in 128 bytes. Name of the advanced parameter. |
| 1.3.6.1.4.1.21296.1.2.3.11.1.1.2 | ColumnserdesValue | read-only | current | The reply will be truncated in 128 bytes. Value of the advanced parameter. |
| 1.3.6.1.4.1.21296.1.2.3.11.1.1.3 | ColumnserdesStatus | read-only | current | State of the advanced parameter (as observable on the system) once it is configured. default value :unknown |
| 1.3.6.1.4.1.21296.1.2.3.12 | Nodeusb | |||
| 1.3.6.1.4.1.21296.1.2.3.12.1 | TableusbTable | not-accessible | current | Represents the USB function of this port. |
| 1.3.6.1.4.1.21296.1.2.3.12.1.1 | RowusbEntry | not-accessible | current | Entry of usbTable |
| 1.3.6.1.4.1.21296.1.2.3.12.1.1.1 | ColumnusbType | read-only | current | The role that this usb port has. |
| 1.3.6.1.4.1.21296.1.2.3.12.1.1.2 | ColumnusbPresent | read-only | current | Describes the presence state of the USB connector. default value :false |
| 1.3.6.1.4.1.21296.1.2.3.12.1.1.3 | ColumnusbAvailableSpace | read-only | current | The current available storage space in the file-system associated with this USB port. Conditions:../type = 'storage' and ../present = 'true' |
| 1.3.6.1.4.1.21296.1.2.3.12.1.1.4 | ColumnusbTotalSpace | read-only | current | The total storage space available in the file-system associated with this USB port. Conditions:../type = 'storage' and ../present = 'true' |
| 1.3.6.1.4.1.21296.1.2.3.12.1.1.5 | ColumnusbPath | read-only | current | Local filesystem path on where this USB file-system is mounted; this can be used as a target/source for file transfer operations. Conditions:../type = 'storage… |
| 1.3.6.1.4.1.21296.1.2.3.13 | NodecommEth | |||
| 1.3.6.1.4.1.21296.1.2.3.13.1 | TablecommEthTable | not-accessible | current | Communication ethernet port. |
| 1.3.6.1.4.1.21296.1.2.3.13.1.1 | RowcommEthEntry | not-accessible | current | Entry of commEthTable |
| 1.3.6.1.4.1.21296.1.2.3.13.1.1.1 | ColumncommEthAutoNegotiation | read-only | current | Auto negotiation mode. default value :enabled |
| 1.3.6.1.4.1.21296.1.2.3.13.1.1.2 | ColumncommEthMtu | read-only | current | The maximum transmission unit size in octets for the physical Ethernet port. UNITS:octets default value :1500 |
| 1.3.6.1.4.1.21296.1.2.3.13.1.1.3 | ColumncommEthDuplexMode | read-only | current | Duplex mode; only valid if auto-negotiation is disabled. Conditions:../auto-negotiation = 'disabled' default value :full |
| 1.3.6.1.4.1.21296.1.2.3.13.1.1.4 | ColumncommEthOperationalDuplexMode | read-only | current | Operational duplex mode. default value :unknown |
| 1.3.6.1.4.1.21296.1.2.3.13.1.1.5 | ColumncommEthRate | read-only | current | Required Ethernet rate; only valid if auto-negotiation is disabled. Conditions:../auto-negotiation = 'disabled' default value :maximum |
| 1.3.6.1.4.1.21296.1.2.3.13.1.1.6 | ColumncommEthOperationalRate | read-only | current | Operational Ethernet rate. default value :unknown |
| 1.3.6.1.4.1.21296.1.2.3.13.1.1.7 | ColumncommEthFlowControl | read-only | current | Specifies the type of flow control to be supported. Conditions:../auto-negotiation = 'disabled' default value :disabled |
| 1.3.6.1.4.1.21296.1.2.3.13.1.1.8 | ColumncommEthOperationalFlowControl | read-only | current | Operational flow control. default value :unknown |
| 1.3.6.1.4.1.21296.1.2.3.13.1.1.9 | ColumncommEthMacAddress | read-only | current | MAC Address of the port. default value :00:00:00:00:00:00 |
| 1.3.6.1.4.1.21296.1.2.3.13.1.1.10 | ColumncommEthRedundancyState | read-only | current | Redundancy state of the comm port. default value :none |
| 1.3.6.1.4.1.21296.1.2.3.13.1.1.11 | ColumncommEthLldpTransmitInterval | read-only | current | The interval to transmit LLDP Tx TLVs. UNITS:seconds default value :30 |
| 1.3.6.1.4.1.21296.1.2.3.13.1.1.12 | ColumncommEthLldpMgmtAddrIf | read-only | current | Specify which interface's IP address to be used for management address. |
| 1.3.6.1.4.1.21296.1.2.3.13.1.1.13 | ColumncommEthLldpAdminStatus | read-only | current | LLDP operational mode for this port. default value :disabled |
| 1.3.6.1.4.1.21296.1.2.3.13.1.1.14 | ColumncommEthMode | read-only | current | Indicates the mode of operation of control channel. default value :L3 |
| 1.3.6.1.4.1.21296.1.2.3.13.1.1.15 | ColumncommEthCacTotalBandwidth | read-only | current | Bandwidth available for PLE pseudowires. default value :399 |
| 1.3.6.1.4.1.21296.1.2.3.13.1.1.16 | ColumncommEthCacReservedBandwidth | read-only | current | Bandwidth reserved by PLE pseudowires. |
| 1.3.6.1.4.1.21296.1.2.3.14 | Nodeconsole | |||
| 1.3.6.1.4.1.21296.1.2.3.14.1 | TableconsoleTable | not-accessible | current | Parameters associated with this card's serial console port. |
| 1.3.6.1.4.1.21296.1.2.3.14.1.1 | RowconsoleEntry | not-accessible | current | Entry of consoleTable |
| 1.3.6.1.4.1.21296.1.2.3.14.1.1.1 | ColumnconsoleBaudRate | read-only | current | The configured baud-rate for this card's console port. Default value is card type specific. |
| 1.3.6.1.4.1.21296.1.2.3.14.1.1.2 | ColumnconsoleLocalSwitch | read-only | current | Defines the global access to all card's console port. Access can be overridden per console port at the card level. default value :use-global-switch |
| 1.3.6.1.4.1.21296.1.2.3.14.1.1.3 | ColumnconsoleStatus | read-only | current | Current status of the console for this card. default value :enabled |
| 1.3.6.1.4.1.21296.1.2.3.14.1.1.4 | ColumnconsoleActualBaudRate | read-only | current | The actual baud-rate for this card's console port. If auto-sensing is enabled, this will reveal the detected baud-rate. If a fixed baud-rate is configured, thi… |
| 1.3.6.1.4.1.21296.1.2.3.14.1.1.5 | ColumnconsoleAutoSensingState | read-only | current | Current state of the auto-sensing mechanism. Only visible if auto-sensing is enabled for this port. Conditions:../baud-rate = 'auto-sensing' default value :sen… |
| 1.3.6.1.4.1.21296.1.2.3.16 | Nodeled | |||
| 1.3.6.1.4.1.21296.1.2.3.16.1 | TableledTable | not-accessible | current | Representation of a LED in a FRU. Object exists even if FRU is not physically present. |
| 1.3.6.1.4.1.21296.1.2.3.16.1.1 | RowledEntry | not-accessible | current | Entry of ledTable |
| 1.3.6.1.4.1.21296.1.2.3.16.1.1.1 | ColumnledLocation | read-only | current | AID of equipment location of the LED (may be a chassis, card or a port AID). |
| 1.3.6.1.4.1.21296.1.2.3.16.1.1.2 | ColumnledName | read-only | current | Name of the LED within the FRU. |
| 1.3.6.1.4.1.21296.1.2.3.16.1.1.3 | ColumnledStatus | read-only | current | Current color status of the LED. default value :not-available |
| 1.3.6.1.4.1.21296.1.2.3.17 | NodeequipmentPolicies | |||
| 1.3.6.1.4.1.21296.1.2.3.17.1 | ScalarequipmentPoliciesTomAutoMigration | read-only | current | Enables automatic update of tom subtype based on present equipment. This update may have direct impact on existing configurations. Note1: this has impact on to… |
| 1.3.6.1.4.1.21296.1.2.3.17.2 | ScalarequipmentPoliciesChassisAssignmentMode | read-only | current | Determine if the chassis id assignment is done manually or automatically. default value :manual |
| 1.3.6.1.4.1.21296.1.2.3.17.3 | ScalarequipmentPoliciesCommEthLocation | read-only | current | Physical location of the communication ethernet ports. default value :prefer-dcn-in-front |
| 1.3.6.1.4.1.21296.1.2.3.17.4 | ScalarequipmentPoliciesAutoAssignedDirections | read-only | current | Enables automatic direction assignment when a card that supports directions is provisioned. default value :enabled |
| 1.3.6.1.4.1.21296.1.2.3.17.5 | ScalarequipmentPoliciesAutoAssignedDegrees | read-only | current | Enables automatic degree assignment when a card that supports degree(s) is provisioned. default value :disabled |
| 1.3.6.1.4.1.21296.1.2.3.17.6 | ScalarequipmentPoliciesCableIdControl | read-only | current | It enables or disables the cable ID verification. In SLTE (l0-mode-op = SLTE) mode, it is automatically enabled. It can be enabled or disabled by the user (def… |
| 1.3.6.1.4.1.21296.1.2.3.18 | NodeequipmentTemplates | |||
| 1.3.6.1.4.1.21296.1.2.3.18.1 | ScalarequipmentTemplatesUseSerdesTemplates | read-only | current | Whether serdes-templates are globally enabled or not. See description of 'serdes-template' list for details. On enabling: templates are not automatically appli… |
| 1.3.6.1.4.1.21296.1.2.3.19 | NodeserdesTemplate | |||
| 1.3.6.1.4.1.21296.1.2.3.19.1 | TableserdesTemplateTable | not-accessible | current | A template that allows to auto-configure serdes for 3rd party TOMs. serdes-templates are created by the user per tom-part-number and apply to all line cards th… |
| 1.3.6.1.4.1.21296.1.2.3.19.1.1 | RowserdesTemplateEntry | not-accessible | current | Entry of serdesTemplateTable |
| 1.3.6.1.4.1.21296.1.2.3.19.1.1.1 | ColumnserdesTemplateTomPartNumber | read-only | current | The TOM part-number to which this template applies. If not provided, uses the same value as the template name. |
| 1.3.6.1.4.1.21296.1.2.3.19.1.1.2 | ColumnserdesTemplatePortsApplicable | read-only | current | The list of ports to which this template is applicable, or 'all' if all ports are to be considered (default).This is originally a YANG leaf-list, here encoded … |
| 1.3.6.1.4.1.21296.1.2.3.19.1.1.3 | ColumnserdesTemplateName | read-only | current | The name of the serdes-template. |
| 1.3.6.1.4.1.21296.1.2.3.19.1.1.4 | ColumnserdesTemplateCardTypesApplicable | read-only | current | The list of card-types to which this template applies, or 'all' if all card-types are to be considered (default).This is originally a YANG leaf-list, here enco… |
| 1.3.6.1.4.1.21296.1.2.3.20 | NodeserdesTemplateENTR | |||
| 1.3.6.1.4.1.21296.1.2.3.20.1 | TableserdesTemplateENTRTable | not-accessible | current | An individual entry to the serdes-template, composed of a serdes parameter name and associated value. |
| 1.3.6.1.4.1.21296.1.2.3.20.1.1 | RowserdesTemplateENTREntry | not-accessible | current | Entry of serdesTemplateENTRTable |
| 1.3.6.1.4.1.21296.1.2.3.20.1.1.1 | ColumnserdesTemplateENTRName | read-only | current | The reply will be truncated in 128 bytes. Name of the serdes parameter. |
| 1.3.6.1.4.1.21296.1.2.3.20.1.1.2 | ColumnserdesTemplateENTRValue | read-only | current | The reply will be truncated in 128 bytes. Value of the serdes parameter. |
| 1.3.6.1.4.1.21296.1.2.3.21 | NodeunprovisionedInventory | |||
| 1.3.6.1.4.1.21296.1.2.3.21.1 | TableunprovisionedInventoryTable | not-accessible | current | List of detected inventory but not yet accepted by the Node Controller in Multi-Chassis configuration. |
| 1.3.6.1.4.1.21296.1.2.3.21.1.1 | RowunprovisionedInventoryEntry | not-accessible | current | Entry of unprovisionedInventoryTable |
| 1.3.6.1.4.1.21296.1.2.3.21.1.1.1 | ColumnunprovisionedInventoryChassisSerialNumber | read-only | current | The residing chassis serial number. |
| 1.3.6.1.4.1.21296.1.2.3.21.1.1.2 | ColumnunprovisionedInventorySlotName | read-only | current | The residing slot name for the equipment. If the equipment is the chassis, the slot-name is empty |
| 1.3.6.1.4.1.21296.1.2.3.21.1.1.3 | ColumnunprovisionedInventoryHardwareVersion | read-only | current | Hardware version of this FRU. |
| 1.3.6.1.4.1.21296.1.2.3.21.1.1.4 | ColumnunprovisionedInventoryActualType | read-only | current | FRU type of actual equipment. |
| 1.3.6.1.4.1.21296.1.2.3.21.1.1.5 | ColumnunprovisionedInventoryActualSubtype | read-only | current | FRU subtype of actual equipment - only available if applicable. |
| 1.3.6.1.4.1.21296.1.2.3.21.1.1.6 | ColumnunprovisionedInventorySwSupportRevision | read-only | current | Software revision currently installed. default value :0 |
| 1.3.6.1.4.1.21296.1.2.3.21.1.1.7 | ColumnunprovisionedInventoryPON | read-only | current | Current PON of the equipment. |
| 1.3.6.1.4.1.21296.1.2.3.21.1.1.8 | ColumnunprovisionedInventorySerialNumber | read-only | current | Serial number of the equipment. |
| 1.3.6.1.4.1.21296.1.2.3.21.1.1.9 | ColumnunprovisionedInventoryClei | read-only | current | Common Language Equipment Identifier. |
| 1.3.6.1.4.1.21296.1.2.3.21.1.1.10 | ColumnunprovisionedInventoryVendor | read-only | current | Vendor of this equipment. |
| 1.3.6.1.4.1.21296.1.2.3.21.1.1.11 | ColumnunprovisionedInventoryPartNumber | read-only | current | Part number for this equipment. |
| 1.3.6.1.4.1.21296.1.2.3.21.1.1.12 | ColumnunprovisionedInventoryManufactureDate | read-only | current | Manufacture Date in a date-time format (YYYY-MM-DDThh:mm:ssZ) or 'NA' if not available. |
| 1.3.6.1.4.1.21296.1.2.3.21.1.1.13 | ColumnunprovisionedInventoryDetectionTimestamp | read-only | current | Timestamp with the last time the unprovisioned equipment was detected by the Node Controller. |
| 1.3.6.1.4.1.21296.1.2.3.22 | NodeglobalPowerProfile | |||
| 1.3.6.1.4.1.21296.1.2.3.22.1 | TableglobalPowerProfileTable | not-accessible | current | Allows configuration of the power profile used for all instances of a given card type, if that card supports power-profiles. Alternatively, the global-power-pr… |
| 1.3.6.1.4.1.21296.1.2.3.22.1.1 | RowglobalPowerProfileEntry | not-accessible | current | Entry of globalPowerProfileTable |
| 1.3.6.1.4.1.21296.1.2.3.22.1.1.1 | ColumnglobalPowerProfileCardType | read-only | current | The card-type associated with this global-power-profile configuration. |
| 1.3.6.1.4.1.21296.1.2.3.22.1.1.2 | ColumnglobalPowerProfileEnabled | read-only | current | Whether this global-power-profile is enabled. If enabled, both existing and newly created instances of card-type will have its power-profile set to the selecte… |
| 1.3.6.1.4.1.21296.1.2.3.22.1.1.3 | ColumnglobalPowerProfileProfileName | read-only | current | Globally used profile-name for this card-type, if enabled. Needs to match an existing supported-power-profile name for this card. Attribute has no impact if gl… |
| 1.3.6.1.4.1.21296.1.2.3.23 | NodesubComponent | |||
| 1.3.6.1.4.1.21296.1.2.3.23.1 | TablesubComponentTable | not-accessible | current | Sub-component of a card representing an attached processing module. |
| 1.3.6.1.4.1.21296.1.2.3.23.1.1 | RowsubComponentEntry | not-accessible | current | Entry of subComponentTable |
| 1.3.6.1.4.1.21296.1.2.3.23.1.1.1 | ColumnsubComponentName | read-only | current | Sub-component identifier. |
| 1.3.6.1.4.1.21296.1.2.3.23.1.1.2 | ColumnsubComponentDescription | read-only | current | System-provided description of this sub-component. |
| 1.3.6.1.4.1.21296.1.2.3.23.1.1.3 | ColumnsubComponentLastRebootTime | read-only | current | Timestamp of the last reboot event of the sub-component. |
| 1.3.6.1.4.1.21296.1.2.3.23.1.1.4 | ColumnsubComponentLastRebootReason | read-only | current | Reason why the last reboot was done. |
| 1.3.6.1.4.1.21296.1.2.3.23.1.1.5 | ColumnsubComponentAID | read-only | current | Resource Access Identifier (AID). Identifies an instance within a specific resource type. |
| 1.3.6.1.4.1.21296.1.2.5 | NodeopticalCommon | |||
| 1.3.6.1.4.1.21296.1.2.5.1 | Noderesources | |||
| 1.3.6.1.4.1.21296.1.2.5.1.1 | TableresourcesTable | not-accessible | current | Resources of this particular card. Resource details will differ with each card type. |
| 1.3.6.1.4.1.21296.1.2.5.1.1.1 | RowresourcesEntry | not-accessible | current | Entry of resourcesTable |
| 1.3.6.1.4.1.21296.1.2.5.1.1.1.1 | ColumnresourcesSupportedCarriers | read-only | current | Names of the carriers that are supported by this card. To be used upon super-channel creation.This is originally a YANG leaf-list, here encoded as a comma sepa… |
| 1.3.6.1.4.1.21296.1.2.5.1.1.1.2 | ColumnresourcesUnassignedCarriers | read-only | current | Names of the carriers that are not yet assigned to a super-channel in this card.This is originally a YANG leaf-list, here encoded as a comma separated list of … |
| 1.3.6.1.4.1.21296.1.2.5.1.1.1.3 | ColumnresourcesSupportedSubComponents | read-only | current | Names of sub-components present in this card, which can be addressed for certain operations like restart.This is originally a YANG leaf-list, here encoded as a… |
| 1.3.6.1.4.1.21296.1.2.5.1.1.1.4 | ColumnresourcesPairedSlotTotalBandwidth | read-only | current | Total supported bandwidth for the paired slot connection. This is applicable only for card models that support paired mode. default value :0 |
| 1.3.6.1.4.1.21296.1.2.5.1.1.1.5 | ColumnresourcesPairedSlotAvailableBandwidth | read-only | current | Available bandwidth for the paired slot connection. This is applicable only for card models that support paired mode. default value :0 |
| 1.3.6.1.4.1.21296.1.2.5.1.1.1.8 | ColumnresourcesInternalCellSwitchTotalBandwidth | read-only | current | Total internal cell-switch bandwidth. default value :0 |
| 1.3.6.1.4.1.21296.1.2.5.1.1.1.9 | ColumnresourcesInternalCellSwitchAvailableBandwidth | read-only | current | Available internal cell-switch bandwidth. default value :0 |
| 1.3.6.1.4.1.21296.1.2.5.2 | Nodecapabilities | |||
| 1.3.6.1.4.1.21296.1.2.5.2.4 | Nodegadt | |||
| 1.3.6.1.4.1.21296.1.2.5.2.4.1 | ScalargadtVersion | read-only | current | Table version. |
| 1.3.6.1.4.1.21296.1.2.5.2.5 | NodesupportedChassis | |||
| 1.3.6.1.4.1.21296.1.2.5.2.5.1 | TablesupportedChassisTable | not-accessible | current | Capability information for supported chassis. |
| 1.3.6.1.4.1.21296.1.2.5.2.5.1.1 | RowsupportedChassisEntry | not-accessible | current | Entry of supportedChassisTable |
| 1.3.6.1.4.1.21296.1.2.5.2.5.1.1.1 | ColumnsupportedChassisChassisType | read-only | current | Chassis type name. |
| 1.3.6.1.4.1.21296.1.2.5.2.5.1.1.2 | ColumnsupportedChassisDescription | read-only | current | The reply will be truncated in 128 bytes. Human readable description for this chassis-type. |
| 1.3.6.1.4.1.21296.1.2.5.2.5.1.1.3 | ColumnsupportedChassisControllerRedundancySupported | read-only | current | Whether this chassis supports controller redundancy or not. |
| 1.3.6.1.4.1.21296.1.2.5.2.5.1.1.4 | ColumnsupportedChassisPowerControlSupported | read-only | current | Whether this chassis supports power control, i.e. the ability to evaluate the power supply currently provided by the PEMs against the configured equipment. A c… |
| 1.3.6.1.4.1.21296.1.2.5.2.5.1.1.5 | ColumnsupportedChassisDepth | read-only | current | Chassis depth in millimeters. UNITS:mm |
| 1.3.6.1.4.1.21296.1.2.5.2.5.1.1.6 | ColumnsupportedChassisHeight | read-only | current | Chassis height in RUs (Rack Units). UNITS:RUs |
| 1.3.6.1.4.1.21296.1.2.5.2.5.1.1.7 | ColumnsupportedChassisNumberOfFrontSlots | read-only | current | Number of equipment holder slots in the front plate on the chassis. |
| 1.3.6.1.4.1.21296.1.2.5.2.5.1.1.8 | ColumnsupportedChassisNumberOfRearSlots | read-only | current | Number of equipment holder slots in the back plate on the chassis. |
| 1.3.6.1.4.1.21296.1.2.5.2.5.1.1.9 | ColumnsupportedChassisLeds | read-only | current | List of LEDs available in the chassis.This is originally a YANG leaf-list, here encoded as a comma separated list of values. |
| 1.3.6.1.4.1.21296.1.2.5.2.5.1.1.10 | ColumnsupportedChassisSupportedSubchassisType | read-only | current | List of chassis-types that this chassis supports as sub-chassis. If empty, means this chassis-type does not support multi-chassis feature.This is originally a … |
| 1.3.6.1.4.1.21296.1.2.5.2.5.1.1.11 | ColumnsupportedChassisSupportedSubtype | read-only | current | Supported chassis subtypes; may be empty if chassis doesn't support subtypes.This is originally a YANG leaf-list, here encoded as a comma separated list of val… |
| 1.3.6.1.4.1.21296.1.2.5.2.5.1.1.12 | ColumnsupportedChassisDefaultSubtype | read-only | current | Default subtype Supported by chassis. |
| 1.3.6.1.4.1.21296.1.2.5.2.5.1.1.13 | ColumnsupportedChassisFanAdjustmentOnAltitude | read-only | current | Whether FAN(s) rotation are automatically adjusting based on the configured altitude. default value :false |
| 1.3.6.1.4.1.21296.1.2.5.2.5.1.1.14 | ColumnsupportedChassisDustFilterReplacement | read-only | current | Chassis characteristics related with dust filter (and its replacement). default value :optional-dust-filter |
| 1.3.6.1.4.1.21296.1.2.5.2.5.1.1.15 | ColumnsupportedChassisSupportedFeatures | read-only | current | Supported features; may be empty if no features are not supported.This is originally a YANG leaf-list, here encoded as a comma separated list of values. |
| 1.3.6.1.4.1.21296.1.2.5.2.6 | NodesupportedSlot | |||
| 1.3.6.1.4.1.21296.1.2.5.2.6.1 | TablesupportedSlotTable | not-accessible | current | Capability for each slot. The supported-slots can be within each supported-chassis or supported-card. |
| 1.3.6.1.4.1.21296.1.2.5.2.6.1.1 | RowsupportedSlotEntry | not-accessible | current | Entry of supportedSlotTable |
| 1.3.6.1.4.1.21296.1.2.5.2.6.1.1.1 | ColumnsupportedSlotSlotName | read-only | current | Name of the slot. |
| 1.3.6.1.4.1.21296.1.2.5.2.6.1.1.2 | ColumnsupportedSlotSlotLocation | read-only | current | Physical location of the slot in the chassis |
| 1.3.6.1.4.1.21296.1.2.5.2.6.1.1.3 | ColumnsupportedSlotSlotVerticalPosition | read-only | current | Position of the slot vertically in the chassis, counting from the top of the chassis/card, in RUs. Example: position 3 means third RU starting from the top of … |
| 1.3.6.1.4.1.21296.1.2.5.2.6.1.1.4 | ColumnsupportedSlotSlotHorizontalPosition | read-only | current | Position of the slot horizontally in the chassis/card within the current RU, counting from the left of the chassis/card. For back slots, the position is counte… |
| 1.3.6.1.4.1.21296.1.2.5.2.6.1.1.5 | ColumnsupportedSlotPossibleCardTypes | read-only | current | List of possible card types in this slot.This is originally a YANG leaf-list, here encoded as a comma separated list of values. |
| 1.3.6.1.4.1.21296.1.2.5.2.6.1.1.6 | ColumnsupportedSlotConfigurationMode | read-only | current | Configuration mode for the cards in this slot (or toms in this port). default value :user-configured |
| 1.3.6.1.4.1.21296.1.2.5.2.6.1.1.7 | ColumnsupportedSlotAutoProvisionCapable | read-only | current | Whether this slot supports card auto-provisioning. |
| 1.3.6.1.4.1.21296.1.2.5.2.6.1.1.8 | ColumnsupportedSlotDefaultCard | read-only | current | Card that exists in this slot by default. |
| 1.3.6.1.4.1.21296.1.2.5.2.6.1.1.9 | ColumnsupportedSlotRequiresBlankWhenEmpty | read-only | current | Whether this slot requires a BLANK filler card when empty. |
| 1.3.6.1.4.1.21296.1.2.5.2.6.1.1.10 | ColumnsupportedSlotResetPower | read-only | current | Reset power consumption for this card, at 55C |
| 1.3.6.1.4.1.21296.1.2.5.2.6.1.1.11 | ColumnsupportedSlotVirtualSlot | read-only | current | Describes whether this slot is virtual. default value :false |
| 1.3.6.1.4.1.21296.1.2.5.2.6.1.1.12 | ColumnsupportedSlotLeds | read-only | current | List of LEDs available in the slot.This is originally a YANG leaf-list, here encoded as a comma separated list of values. |
| 1.3.6.1.4.1.21296.1.2.5.2.7 | NodesupportedCard | |||
| 1.3.6.1.4.1.21296.1.2.5.2.7.1 | TablesupportedCardTable | not-accessible | current | Capability information for supported card. |
| 1.3.6.1.4.1.21296.1.2.5.2.7.1.1 | RowsupportedCardEntry | not-accessible | current | Entry of supportedCardTable |
| 1.3.6.1.4.1.21296.1.2.5.2.7.1.1.1 | ColumnsupportedCardCardType | read-only | current | Card type name. |
| 1.3.6.1.4.1.21296.1.2.5.2.7.1.1.2 | ColumnsupportedCardSwSupportRevision | read-only | current | Software revision currently installed. default value :0 |
| 1.3.6.1.4.1.21296.1.2.5.2.7.1.1.3 | ColumnsupportedCardSupportedSubtype | read-only | current | Supported card subtypes; may be empty if card doesn't support subtypes.This is originally a YANG leaf-list, here encoded as a comma separated list of values. |
| 1.3.6.1.4.1.21296.1.2.5.2.7.1.1.4 | ColumnsupportedCardDescription | read-only | current | The reply will be truncated in 128 bytes. Human readable description for this card-type. |
| 1.3.6.1.4.1.21296.1.2.5.2.7.1.1.5 | ColumnsupportedCardCardWidth | read-only | current | Number of slots this card occupies; not-applicable for RU equipment. |
| 1.3.6.1.4.1.21296.1.2.5.2.7.1.1.6 | ColumnsupportedCardCardHeight | read-only | current | Card height in RUs. UNITS:RUs |
| 1.3.6.1.4.1.21296.1.2.5.2.7.1.1.7 | ColumnsupportedCardIsFieldReplaceable | read-only | current | Whether this card-type is a field replaceable unit (FRU). |
| 1.3.6.1.4.1.21296.1.2.5.2.7.1.1.8 | ColumnsupportedCardCategory | read-only | current | Card category. |
| 1.3.6.1.4.1.21296.1.2.5.2.7.1.1.9 | ColumnsupportedCardMaxPowerDraw | read-only | current | Maximum power draw for this card. |
| 1.3.6.1.4.1.21296.1.2.5.2.7.1.1.10 | ColumnsupportedCardLocationLedSupport | read-only | current | Whether this card-type support location-led operation. |
| 1.3.6.1.4.1.21296.1.2.5.2.7.1.1.11 | ColumnsupportedCardLeds | read-only | current | List of LEDs available in the card.This is originally a YANG leaf-list, here encoded as a comma separated list of values. |
| 1.3.6.1.4.1.21296.1.2.5.2.7.1.1.12 | ColumnsupportedCardConsolePortSupport | read-only | current | Whether this card-type supports a serial console port, with or without auto-sensing capabilities. default value :no |
| 1.3.6.1.4.1.21296.1.2.5.2.7.1.1.13 | ColumnsupportedCardDefaultConsoleBaudRate | read-only | current | For cards with fixed baud-rate, defines the default baud-rate. |
| 1.3.6.1.4.1.21296.1.2.5.2.7.1.1.14 | ColumnsupportedCardDefaultCardMode | read-only | current | The default card-mode, for cards whose supported-card-mode is not empty. Only relevant if card has the concept of card-mode. |
| 1.3.6.1.4.1.21296.1.2.5.2.7.1.1.15 | ColumnsupportedCardMode | read-only | current | Supported card-modes; may be empty if card does not support any card-mode.This is originally a YANG leaf-list, here encoded as a comma separated list of values. |
| 1.3.6.1.4.1.21296.1.2.5.2.7.1.1.16 | ColumnsupportedCardSupportSerdesConfig | read-only | current | If true, it means this card-type allows user to configure 3rd Party TOM SerDes values. If false, the card has no need for such customization. default value :fa… |
| 1.3.6.1.4.1.21296.1.2.5.2.7.1.1.17 | ColumnsupportedCardNodeTypeCompatibility | read-only | current | Node Type Compatibility refers to supported NE Node-type for a sled card. Only of relevance for line-card(s) and carrier-card(s).This is originally a YANG leaf… |
| 1.3.6.1.4.1.21296.1.2.5.2.7.1.1.18 | ColumnsupportedCardGridModeSupport | read-only | current | grid-mode capabilities. Only of relevance for line-card(s). default value :general-c-band |
| 1.3.6.1.4.1.21296.1.2.5.2.7.1.1.19 | ColumnsupportedCardSupportedFeatures | read-only | current | Supported features; may be empty if no features are not supported.This is originally a YANG leaf-list, here encoded as a comma separated list of values. |
| 1.3.6.1.4.1.21296.1.2.5.2.7.1.1.20 | ColumnsupportedCardSupportedBands | read-only | current | List of bands supported by the card.This is originally a YANG leaf-list, here encoded as a comma separated list of values. |
| 1.3.6.1.4.1.21296.1.2.5.2.7.1.1.21 | ColumnsupportedCardRequiredPemType | read-only | current | Defines the compatible PEM types required for this card to operate within the chassis.This is originally a YANG leaf-list, here encoded as a comma separated li… |
| 1.3.6.1.4.1.21296.1.2.5.2.7.1.1.22 | ColumnsupportedCardMaxAmbientTemperature | read-only | current | Maximum value of configured-ambient-temperature of the chassis under which the card is supported on it. UNITS:Celsius |
| 1.3.6.1.4.1.21296.1.2.5.2.8 | NodesupportedPort | |||
| 1.3.6.1.4.1.21296.1.2.5.2.8.1 | TablesupportedPortTable | not-accessible | current | Capabilities for each port in each supported card. |
| 1.3.6.1.4.1.21296.1.2.5.2.8.1.1 | RowsupportedPortEntry | not-accessible | current | Entry of supportedPortTable |
| 1.3.6.1.4.1.21296.1.2.5.2.8.1.1.1 | ColumnsupportedPortPortName | read-only | current | The port name. |
| 1.3.6.1.4.1.21296.1.2.5.2.8.1.1.2 | ColumnsupportedPortPortType | read-only | current | The port type. Each port type supports different features and services. |
| 1.3.6.1.4.1.21296.1.2.5.2.8.1.1.4 | ColumnsupportedPortLeds | read-only | current | List of LEDs available for each port of this card.This is originally a YANG leaf-list, here encoded as a comma separated list of values. |
| 1.3.6.1.4.1.21296.1.2.5.2.8.1.1.5 | ColumnsupportedPortDirection | read-only | current | Direction of the port. default value :not-applicable |
| 1.3.6.1.4.1.21296.1.2.5.2.8.1.1.6 | ColumnsupportedPortConfigurationMode | read-only | current | Configuration mode for the cards in this slot (or toms in this port). default value :user-configured |
| 1.3.6.1.4.1.21296.1.2.5.2.8.1.1.7 | ColumnsupportedPortFaceplateLabel | read-only | current | Label on the hardware faceplate. |
| 1.3.6.1.4.1.21296.1.2.5.2.8.1.1.8 | ColumnsupportedPortPresent | read-only | current | Provides information regarding when is this port present (e.g. instanciated as a managed object). The majority of ports are statically available for each card … |
| 1.3.6.1.4.1.21296.1.2.5.2.8.1.1.9 | ColumnsupportedPortDefaultTom | read-only | current | Tom that exists in this port by default. default value :none |
| 1.3.6.1.4.1.21296.1.2.5.2.8.1.1.10 | ColumnsupportedPortParentPort | read-only | current | Name of the parent port. Only applicable for sub-ports. |
| 1.3.6.1.4.1.21296.1.2.5.2.8.1.1.11 | ColumnsupportedPortSubportList | read-only | current | List of sub-ports associated with this port. Only applicable when this port is a parent port.This is originally a YANG leaf-list, here encoded as a comma separ… |
| 1.3.6.1.4.1.21296.1.2.5.2.8.1.1.12 | ColumnsupportedPortAllowsAutoMigration | read-only | current | Indicates if TOMs that are plugged on this port type are auto migrated according with the equipment-policies tom-auto-migration flag. default value :true |
| 1.3.6.1.4.1.21296.1.2.5.2.9 | Nodegsct | |||
| 1.3.6.1.4.1.21296.1.2.5.2.9.1 | TablegsctTable | not-accessible | current | Golden Subtype Constraint Table - contains additional restrictions on supported carrier modes (defined by gcmt), based on card subtype. |
| 1.3.6.1.4.1.21296.1.2.5.2.9.1.1 | RowgsctEntry | not-accessible | current | Entry of gsctTable |
| 1.3.6.1.4.1.21296.1.2.5.2.9.1.1.1 | ColumngsctVersion | read-only | current | Table version. |
| 1.3.6.1.4.1.21296.1.2.5.2.10 | NodesubtypeConstraint | |||
| 1.3.6.1.4.1.21296.1.2.5.2.10.1 | TablesubtypeConstraintTable | not-accessible | current | List of subtype constraints. |
| 1.3.6.1.4.1.21296.1.2.5.2.10.1.1 | RowsubtypeConstraintEntry | not-accessible | current | Entry of subtypeConstraintTable |
| 1.3.6.1.4.1.21296.1.2.5.2.10.1.1.1 | ColumnsubtypeConstraintSubtype | read-only | current | Card Subtype. Represents a group of related PONs for a card type to which these constraints applies. |
| 1.3.6.1.4.1.21296.1.2.5.2.10.1.1.2 | ColumnsubtypeConstraintMinCapacity | read-only | current | The minimum capacity supported by this subtype. UNITS:Gbps |
| 1.3.6.1.4.1.21296.1.2.5.2.10.1.1.3 | ColumnsubtypeConstraintMaxCapacity | read-only | current | The maximum capacity supported by this subtype. -1 means there is no maximum capacity constraint. UNITS:Gbps |
| 1.3.6.1.4.1.21296.1.2.5.2.10.1.1.4 | ColumnsubtypeConstraintSupportedApplications | read-only | current | List of applications supported by this subtype. If this list is empty, then this constraint is not applicable.This is originally a YANG leaf-list, here encoded… |
| 1.3.6.1.4.1.21296.1.2.5.2.10.1.1.5 | ColumnsubtypeConstraintUnsupportedApplications | read-only | current | List of applications not supported by this subtype. If this list is empty, then this constraint is not applicable.This is originally a YANG leaf-list, here enc… |
| 1.3.6.1.4.1.21296.1.2.5.2.10.1.1.6 | ColumnsubtypeConstraintDescription | read-only | current | The reply will be truncated in 128 bytes. Subtype description. |
| 1.3.6.1.4.1.21296.1.2.5.2.11 | Nodegcmt | |||
| 1.3.6.1.4.1.21296.1.2.5.2.11.1 | TablegcmtTable | not-accessible | current | Golden Carrier Mode Table - provides list of supported carrier modes in this card. Applicable for cards that support configurable optical carriers (transponder… |
| 1.3.6.1.4.1.21296.1.2.5.2.11.1.1 | RowgcmtEntry | not-accessible | current | Entry of gcmtTable |
| 1.3.6.1.4.1.21296.1.2.5.2.11.1.1.1 | ColumngcmtVersion | read-only | current | Table version. |
| 1.3.6.1.4.1.21296.1.2.5.2.12 | NodegoldenCarrierMode | |||
| 1.3.6.1.4.1.21296.1.2.5.2.12.1 | TablegoldenCarrierModeTable | not-accessible | current | List of golden carrier modes. |
| 1.3.6.1.4.1.21296.1.2.5.2.12.1.1 | RowgoldenCarrierModeEntry | not-accessible | current | Entry of goldenCarrierModeTable |
| 1.3.6.1.4.1.21296.1.2.5.2.12.1.1.1 | ColumngoldenCarrierModeCarrierMode | read-only | current | An acronymized code (handle) that is indicative of the optical carrier line mode (4-tuple) combination. The format is as follows: <Capacity><ClientMode>.<Baud … |
| 1.3.6.1.4.1.21296.1.2.5.2.12.1.1.2 | ColumngoldenCarrierModeCapacity | read-only | current | The net capacity of the optical carrier. UNITS:Gbps |
| 1.3.6.1.4.1.21296.1.2.5.2.12.1.1.3 | ColumngoldenCarrierModeClientMode | read-only | current | This indicates digital client modes of the signal that is mapped into, and transported by the carriers within this superchannel. |
| 1.3.6.1.4.1.21296.1.2.5.2.12.1.1.4 | ColumngoldenCarrierModeBaudRate | read-only | current | The modulated symbol rate. UNITS:GBaud |
| 1.3.6.1.4.1.21296.1.2.5.2.12.1.1.5 | ColumngoldenCarrierModeApplication | read-only | current | The optical transport application ID this mode is optimized for. |
| 1.3.6.1.4.1.21296.1.2.5.2.12.1.1.6 | ColumngoldenCarrierModeCompatibilityId | read-only | current | Identifies the compatible carrier modes that can be applied simultaneously |
| 1.3.6.1.4.1.21296.1.2.5.2.12.1.1.7 | ColumngoldenCarrierModeStatus | read-only | current | Describes carrier mode release status. |
| 1.3.6.1.4.1.21296.1.2.5.2.12.1.1.8 | ColumngoldenCarrierModeSupportedSubtypes | read-only | current | Subtypes that each carrier mode supports.This is originally a YANG leaf-list, here encoded as a comma separated list of values. |
| 1.3.6.1.4.1.21296.1.2.5.2.12.1.1.9 | ColumngoldenCarrierModeSopTrackingMode | read-only | current | The optical transport SOP tracking mode this mode is optimized for. default value :normal |
| 1.3.6.1.4.1.21296.1.2.5.2.12.1.1.10 | ColumngoldenCarrierModeActualCarrierMode | read-only | current | The actual carrier-mode. |
| 1.3.6.1.4.1.21296.1.2.5.2.12.1.1.11 | ColumngoldenCarrierModeCandidateSubtypes | read-only | current | Subtypes for which this carrier mode has candidate status.This is originally a YANG leaf-list, here encoded as a comma separated list of values. |
| 1.3.6.1.4.1.21296.1.2.5.2.13 | Nodegapt | |||
| 1.3.6.1.4.1.21296.1.2.5.2.13.1 | TablegaptTable | not-accessible | current | Golden Advanced Parameters Table - provides a list of known advanced parameters that this card supports. |
| 1.3.6.1.4.1.21296.1.2.5.2.13.1.1 | RowgaptEntry | not-accessible | current | Entry of gaptTable |
| 1.3.6.1.4.1.21296.1.2.5.2.13.1.1.1 | ColumngaptVersion | read-only | current | Table version. |
| 1.3.6.1.4.1.21296.1.2.5.2.13.1.1.2 | ColumngaptApplicableResourceType | read-only | current | The managed resource type(s) that are applicable for this particular advanced parameter.This is originally a YANG leaf-list, here encoded as a comma separated … |
| 1.3.6.1.4.1.21296.1.2.5.2.14 | NodegoldenAdvancedParameter | |||
| 1.3.6.1.4.1.21296.1.2.5.2.14.1 | TablegoldenAdvancedParameterTable | not-accessible | current | A set of all optical carrier advanced parameters discovered from the equipment. |
| 1.3.6.1.4.1.21296.1.2.5.2.14.1.1 | RowgoldenAdvancedParameterEntry | not-accessible | current | Entry of goldenAdvancedParameterTable |
| 1.3.6.1.4.1.21296.1.2.5.2.14.1.1.1 | ColumngoldenAdvancedParameterName | read-only | current | The reply will be truncated in 128 bytes. The name of the advanced parameter. |
| 1.3.6.1.4.1.21296.1.2.5.2.14.1.1.2 | ColumngoldenAdvancedParameterDescription | read-only | current | The reply will be truncated in 128 bytes. A human readable description of this advanced parameter. |
| 1.3.6.1.4.1.21296.1.2.5.2.14.1.1.3 | ColumngoldenAdvancedParameterType | read-only | current | The reply will be truncated in 128 bytes. Indicates the data type of the advanced parameter. |
| 1.3.6.1.4.1.21296.1.2.5.2.14.1.1.4 | ColumngoldenAdvancedParameterSupportedValues | read-only | current | The reply will be truncated in 128 bytes. This list indicates the possible values that this parameter can take as input. It is a list of ranges. E.g.'1-4, 10-1… |
| 1.3.6.1.4.1.21296.1.2.5.2.14.1.1.5 | ColumngoldenAdvancedParameterDirection | read-only | current | Advanced parameter is applicable to the specified direction. |
| 1.3.6.1.4.1.21296.1.2.5.2.14.1.1.6 | ColumngoldenAdvancedParameterMultiplicity | read-only | current | Identifies number of values user need to enter for this advanced parameter. Same range or allowed-values will apply for each entry. |
| 1.3.6.1.4.1.21296.1.2.5.2.14.1.1.7 | ColumngoldenAdvancedParameterConfigurationImpact | read-only | current | Identifies the configuration steps to apply the change. |
| 1.3.6.1.4.1.21296.1.2.5.2.14.1.1.8 | ColumngoldenAdvancedParameterServiceImpact | read-only | current | Identifies if applying this parameter change causes service impact. If it is service impacting, user must perform an admin lock/maintenance operation or other … |
| 1.3.6.1.4.1.21296.1.2.5.2.15 | NodesupportedTom | |||
| 1.3.6.1.4.1.21296.1.2.5.2.15.1 | TablesupportedTomTable | not-accessible | current | Capability information for supported TOM (Transceiver Optical Module) in the scope of this particular card. |
| 1.3.6.1.4.1.21296.1.2.5.2.15.1.1 | RowsupportedTomEntry | not-accessible | current | Entry of supportedTomTable |
| 1.3.6.1.4.1.21296.1.2.5.2.15.1.1.1 | ColumnsupportedTomTomType | read-only | current | TOM type name. |
| 1.3.6.1.4.1.21296.1.2.5.2.15.1.1.2 | ColumnsupportedTomSupportedSubtype | read-only | current | Supported subtypes for this TOM type in this particular card/port.This is originally a YANG leaf-list, here encoded as a comma separated list of values. |
| 1.3.6.1.4.1.21296.1.2.5.2.15.1.1.6 | ColumnsupportedTomTomSubtypeGroup | read-only | current | TOM subtype group. |
| 1.3.6.1.4.1.21296.1.2.5.2.15.1.1.7 | ColumnsupportedTomSupportedPhyModes | read-only | current | The phy-mode that are supported in this TOM for this card.This is originally a YANG leaf-list, here encoded as a comma separated list of values. |
| 1.3.6.1.4.1.21296.1.2.5.2.15.1.1.8 | ColumnsupportedTomDefaultPhyMode | read-only | current | The phy-mode that is used by default in this TOM for this card. |
| 1.3.6.1.4.1.21296.1.2.5.2.16 | NodetomType | |||
| 1.3.6.1.4.1.21296.1.2.5.2.16.1 | TabletomTypeTable | not-accessible | current | Capability information for supported TOM (Transceiver Optical Module). |
| 1.3.6.1.4.1.21296.1.2.5.2.16.1.1 | RowtomTypeEntry | not-accessible | current | Entry of tomTypeTable |
| 1.3.6.1.4.1.21296.1.2.5.2.16.1.1.1 | ColumntomTypeTomType | read-only | current | TOM type name. |
| 1.3.6.1.4.1.21296.1.2.5.2.16.1.1.2 | ColumntomTypeDataRate | read-only | current | The approximate data-rate for this TOM type. UNITS:Gbps |
| 1.3.6.1.4.1.21296.1.2.5.2.16.1.1.3 | ColumntomTypeDescription | read-only | current | The reply will be truncated in 128 bytes. Human readable description for this TOM type. |
| 1.3.6.1.4.1.21296.1.2.5.2.16.1.1.4 | ColumntomTypeSupportThirdPartyToms | read-only | current | Whether this TOM type accepts third party TOMs in addition to officially supported Nokia TOMs. |
| 1.3.6.1.4.1.21296.1.2.5.2.16.1.1.5 | ColumntomTypeGenericSubtype | read-only | current | 3rd party subtype for this TOM. Available when support 3rd party toms is enable. |
| 1.3.6.1.4.1.21296.1.2.5.2.17 | NodesupportedPowerProfile | |||
| 1.3.6.1.4.1.21296.1.2.5.2.17.1 | TablesupportedPowerProfileTable | not-accessible | current | Supported power profile for this card-type. Different power profiles can be supported to reflect different scenarios when using this card. User is able to defi… |
| 1.3.6.1.4.1.21296.1.2.5.2.17.1.1 | RowsupportedPowerProfileEntry | not-accessible | current | Entry of supportedPowerProfileTable |
| 1.3.6.1.4.1.21296.1.2.5.2.17.1.1.1 | ColumnsupportedPowerProfileName | read-only | current | Profile name. |
| 1.3.6.1.4.1.21296.1.2.5.2.17.1.1.2 | ColumnsupportedPowerProfileProfileDescription | read-only | current | The reply will be truncated in 128 bytes. Description of the profile. |
| 1.3.6.1.4.1.21296.1.2.5.2.17.1.1.3 | ColumnsupportedPowerProfilePowerDraw | read-only | current | Power draw of associated equipment when not in low-power. |
| 1.3.6.1.4.1.21296.1.2.5.2.17.1.1.4 | ColumnsupportedPowerProfileDefault | read-only | current | Whether is the default value or not. |
| 1.3.6.1.4.1.21296.1.2.5.2.19 | NodeoadmCapabilities | |||
| 1.3.6.1.4.1.21296.1.2.5.2.19.1 | ScalaroadmCapabilitiesMaxDegrees | read-only | current | Maximum number of degrees. |
| 1.3.6.1.4.1.21296.1.2.5.2.19.2 | ScalaroadmCapabilitiesMaxAdgs | read-only | current | Maximum number of ADGs (Add/ Drop Group(s)) |
| 1.3.6.1.4.1.21296.1.2.5.2.20 | NodesupportedTomPower | |||
| 1.3.6.1.4.1.21296.1.2.5.2.20.1 | TablesupportedTomPowerTable | not-accessible | current | Host port envelope for MSA power class and maximum power draw, per pluggable (TOM) type on this port. Published for equipment that implements power-class valid… |
| 1.3.6.1.4.1.21296.1.2.5.2.20.1.1 | RowsupportedTomPowerEntry | not-accessible | current | Entry of supportedTomPowerTable |
| 1.3.6.1.4.1.21296.1.2.5.2.20.1.1.1 | ColumnsupportedTomPowerTomType | read-only | current | Pluggable form factor (TOM type identity), matching TOM required-type. |
| 1.3.6.1.4.1.21296.1.2.5.2.20.1.1.2 | ColumnsupportedTomPowerSupportedPowerClass | read-only | current | Maximum MSA power class the host port supports for this pluggable type (may partially support that class; see supported-max-power-draw). |
| 1.3.6.1.4.1.21296.1.2.5.2.20.1.1.3 | ColumnsupportedTomPowerSupportedMaxPowerDraw | read-only | current | Maximum power in watts the host port allows for this pluggable type under supported-power-class. |
| 1.3.6.1.4.1.21296.1.2.5.3 | NodesupportedAdvancedParameter | |||
| 1.3.6.1.4.1.21296.1.2.5.3.1 | TablesupportedAdvancedParameterTable | not-accessible | current | A set of all optical carrier advanced parameters discovered from the equipment. |
| 1.3.6.1.4.1.21296.1.2.5.3.1.1 | RowsupportedAdvancedParameterEntry | not-accessible | current | Entry of supportedAdvancedParameterTable |
| 1.3.6.1.4.1.21296.1.2.5.3.1.1.1 | ColumnsupportedAdvancedParameterName | read-only | current | The reply will be truncated in 128 bytes. The name of the advanced parameter. |
| 1.3.6.1.4.1.21296.1.2.5.3.1.1.2 | ColumnsupportedAdvancedParameterDescription | read-only | current | The reply will be truncated in 128 bytes. A human readable description of this advanced parameter. |
| 1.3.6.1.4.1.21296.1.2.5.3.1.1.3 | ColumnsupportedAdvancedParameterType | read-only | current | The reply will be truncated in 128 bytes. Indicates the data type of the advanced parameter. |
| 1.3.6.1.4.1.21296.1.2.5.3.1.1.4 | ColumnsupportedAdvancedParameterSupportedValues | read-only | current | The reply will be truncated in 128 bytes. This list indicates the possible values that this parameter can take as input. It is a list of ranges. E.g.'1-4, 10-1… |
| 1.3.6.1.4.1.21296.1.2.5.3.1.1.5 | ColumnsupportedAdvancedParameterDirection | read-only | current | Advanced parameter is applicable to the specified direction. |
| 1.3.6.1.4.1.21296.1.2.5.3.1.1.6 | ColumnsupportedAdvancedParameterMultiplicity | read-only | current | Identifies number of values user need to enter for this advanced parameter. Same range or allowed-values will apply for each entry. |
| 1.3.6.1.4.1.21296.1.2.5.3.1.1.7 | ColumnsupportedAdvancedParameterConfigurationImpact | read-only | current | Identifies the configuration steps to apply the change. |
| 1.3.6.1.4.1.21296.1.2.5.3.1.1.8 | ColumnsupportedAdvancedParameterServiceImpact | read-only | current | Identifies if applying this parameter change causes service impact. If it is service impacting, user must perform an admin lock/maintenance operation or other … |
| 1.3.6.1.4.1.21296.1.2.6 | NodecarrierTypes | |||
| 1.3.6.1.4.1.21296.1.2.6.1 | NodeapplicationDescription | |||
| 1.3.6.1.4.1.21296.1.2.6.1.1 | TableapplicationDescriptionTable | not-accessible | current | Detailed description of application ID |
| 1.3.6.1.4.1.21296.1.2.6.1.1.1 | RowapplicationDescriptionEntry | not-accessible | current | Entry of applicationDescriptionTable |
| 1.3.6.1.4.1.21296.1.2.6.1.1.1.1 | ColumnapplicationDescriptionApplication | read-only | current | The optical transport application ID this mode is optimized for. |
| 1.3.6.1.4.1.21296.1.2.6.1.1.1.2 | ColumnapplicationDescriptionApplicationDescription | read-only | current | The reply will be truncated in 128 bytes. Detailed description of application ID |
| 1.3.6.1.4.1.21296.1.2.8 | Nodescg | |||
| 1.3.6.1.4.1.21296.1.2.8.1 | NodesuperChannelGroup | |||
| 1.3.6.1.4.1.21296.1.2.8.1.1 | TablesuperChannelGroupTable | not-accessible | current | Super-channel Group facility. |
| 1.3.6.1.4.1.21296.1.2.8.1.1.1 | RowsuperChannelGroupEntry | not-accessible | current | Entry of superChannelGroupTable |
| 1.3.6.1.4.1.21296.1.2.8.1.1.1.1 | ColumnsuperChannelGroupName | read-only | current | A generic, configurable name for every facility. |
| 1.3.6.1.4.1.21296.1.2.8.1.1.1.2 | ColumnsuperChannelGroupSupportingCard | read-only | current | Card that holds this facility |
| 1.3.6.1.4.1.21296.1.2.8.1.1.1.3 | ColumnsuperChannelGroupSupportingPort | read-only | current | Ports that hold this facilityThis is originally a YANG leaf-list, here encoded as a comma separated list of values. |
| 1.3.6.1.4.1.21296.1.2.8.1.1.1.4 | ColumnsuperChannelGroupSupportingFacilities | read-only | current | An XPath reference to the parent facilities.This is originally a YANG leaf-list, here encoded as a comma separated list of values. |
| 1.3.6.1.4.1.21296.1.2.8.1.1.1.5 | ColumnsuperChannelGroupSupportedFacilities | read-only | current | An XPath reference to the children facilities.This is originally a YANG leaf-list, here encoded as a comma separated list of values. |
| 1.3.6.1.4.1.21296.1.2.8.1.1.1.6 | ColumnsuperChannelGroupAID | read-only | current | Resource Access Identifier (AID). Identifies an instance within a specific resource type. |
| 1.3.6.1.4.1.21296.1.2.8.1.1.1.7 | ColumnsuperChannelGroupLabel | read-only | current | The reply will be truncated in 128 bytes. User label. |
| 1.3.6.1.4.1.21296.1.2.8.1.1.1.8 | ColumnsuperChannelGroupAdminState | read-only | current | The administrative state of the managed object. default value :unlock |
| 1.3.6.1.4.1.21296.1.2.8.1.1.1.9 | ColumnsuperChannelGroupOperState | read-only | current | The operational state of this object. default value :disabled |
| 1.3.6.1.4.1.21296.1.2.8.1.1.1.10 | ColumnsuperChannelGroupAvailState | read-only | current | Availability state of an entity. |
| 1.3.6.1.4.1.21296.1.2.8.1.1.1.11 | ColumnsuperChannelGroupManagedBy | read-only | current | Describes whether this managed entity was system created or not. Only user created entities can be user deleted. default value :system |
| 1.3.6.1.4.1.21296.1.2.8.1.1.1.12 | ColumnsuperChannelGroupAutoInServiceEnabled | read-only | current | Auto-in-service switch for this facility. default value :false |
| 1.3.6.1.4.1.21296.1.2.8.1.1.1.13 | ColumnsuperChannelGroupValidSignalTime | read-only | current | Configurable time that represents a detection of a valid signal. Used for auto-in-service mechanism. UNITS:minutes default value :480 |
| 1.3.6.1.4.1.21296.1.2.8.1.1.1.14 | ColumnsuperChannelGroupRemainingValidSignalTime | read-only | current | Actual remaining time for this facility to be automatically enabled by the auto-in-service mechanism. UNITS:minutes |
| 1.3.6.1.4.1.21296.1.2.8.1.1.1.15 | ColumnsuperChannelGroupAlarmReportControl | read-only | current | Controls the reporting of alarms for this particular object. default value :allowed |
| 1.3.6.1.4.1.21296.1.2.8.1.1.1.16 | ColumnsuperChannelGroupLineSystemMode | read-only | current | Indicates the specific mode of power control configured on the L1 transponder, and specifically, on this particular SCG port within the L1 transponder. The att… |
| 1.3.6.1.4.1.21296.1.2.8.1.1.1.17 | ColumnsuperChannelGroupOpenwaveContentionCheck | read-only | current | Enables DNA assisted contention control mechanism in openwave mode. Only of relevance for line system mode openwave default value :false |
| 1.3.6.1.4.1.21296.1.2.8.1.1.1.18 | ColumnsuperChannelGroupExpectedTotalTxPower | read-only | current | Theoretical total TX power at Front Panel calculated based on per carrier Target TX power value. Only of relevance for line system mode openwave default value … |
| 1.3.6.1.4.1.21296.1.2.9 | Nodesch | |||
| 1.3.6.1.4.1.21296.1.2.9.1 | NodesuperChannel | |||
| 1.3.6.1.4.1.21296.1.2.9.1.1 | TablesuperChannelTable | not-accessible | current | Unified channel of optical carriers. Can have many optical channels. |
| 1.3.6.1.4.1.21296.1.2.9.1.1.1 | RowsuperChannelEntry | not-accessible | current | Entry of superChannelTable |
| 1.3.6.1.4.1.21296.1.2.9.1.1.1.1 | ColumnsuperChannelName | read-only | current | A generic, configurable name for every facility. |
| 1.3.6.1.4.1.21296.1.2.9.1.1.1.2 | ColumnsuperChannelSupportingCard | read-only | current | Card that holds this facility |
| 1.3.6.1.4.1.21296.1.2.9.1.1.1.3 | ColumnsuperChannelSupportingPort | read-only | current | Ports that hold this facilityThis is originally a YANG leaf-list, here encoded as a comma separated list of values. |
| 1.3.6.1.4.1.21296.1.2.9.1.1.1.4 | ColumnsuperChannelSupportingFacilities | read-only | current | An XPath reference to the parent facilities.This is originally a YANG leaf-list, here encoded as a comma separated list of values. |
| 1.3.6.1.4.1.21296.1.2.9.1.1.1.5 | ColumnsuperChannelSupportedFacilities | read-only | current | An XPath reference to the children facilities.This is originally a YANG leaf-list, here encoded as a comma separated list of values. |
| 1.3.6.1.4.1.21296.1.2.9.1.1.1.6 | ColumnsuperChannelAID | read-only | current | Resource Access Identifier (AID). Identifies an instance within a specific resource type. |
| 1.3.6.1.4.1.21296.1.2.9.1.1.1.7 | ColumnsuperChannelLabel | read-only | current | The reply will be truncated in 128 bytes. User label. |
| 1.3.6.1.4.1.21296.1.2.9.1.1.1.8 | ColumnsuperChannelAdminState | read-only | current | The administrative state of the managed object. default value :unlock |
| 1.3.6.1.4.1.21296.1.2.9.1.1.1.9 | ColumnsuperChannelOperState | read-only | current | The operational state of this object. default value :disabled |
| 1.3.6.1.4.1.21296.1.2.9.1.1.1.10 | ColumnsuperChannelAvailState | read-only | current | Availability state of an entity. |
| 1.3.6.1.4.1.21296.1.2.9.1.1.1.11 | ColumnsuperChannelManagedBy | read-only | current | Describes whether this managed entity was system created or not. Only user created entities can be user deleted. default value :system |
| 1.3.6.1.4.1.21296.1.2.9.1.1.1.12 | ColumnsuperChannelAlarmReportControl | read-only | current | Controls the reporting of alarms for this particular object. default value :allowed |
| 1.3.6.1.4.1.21296.1.2.9.1.1.1.13 | ColumnsuperChannelCarriers | read-only | current | A list of carriers that are bound to this superchannel. Possible values can be any card/resources/supported-carriers.This is originally a YANG leaf-list, here … |
| 1.3.6.1.4.1.21296.1.2.9.1.1.1.14 | ColumnsuperChannelCarrierMode | read-only | current | Unique identifier of the carrier mode this super-channel is configured as. Possible carrier-modes are listed in the golden-carrier-mode list. |
| 1.3.6.1.4.1.21296.1.2.9.1.1.1.15 | ColumnsuperChannelCapacity | read-only | current | The net capacity of the optical carrier. UNITS:Gbps |
| 1.3.6.1.4.1.21296.1.2.9.1.1.1.16 | ColumnsuperChannelClientMode | read-only | current | This indicates digital client modes of the signal that is mapped into, and transported by the carriers within this superchannel. |
| 1.3.6.1.4.1.21296.1.2.9.1.1.1.17 | ColumnsuperChannelBaudRate | read-only | current | The modulated symbol rate. UNITS:GBaud |
| 1.3.6.1.4.1.21296.1.2.9.1.1.1.18 | ColumnsuperChannelApplication | read-only | current | The optical transport application ID this mode is optimized for. |
| 1.3.6.1.4.1.21296.1.2.9.1.1.1.19 | ColumnsuperChannelSpectralBandwidth | read-only | current | Spectral bandwith associated with this carrier(s). UNITS:GHz |
| 1.3.6.1.4.1.21296.1.2.9.1.1.1.20 | ColumnsuperChannelContentionCheckStatus | read-only | current | Contention Check state, set via DNA in openwave mode. Only applicable if openwave-contention-check is enabled at super-channel-group level. default value :pend… |
| 1.3.6.1.4.1.21296.1.2.9.1.1.1.21 | ColumnsuperChannelSopTrackingMode | read-only | current | The optical transport SOP tracking mode this mode is optimized for. default value :normal |
| 1.3.6.1.4.1.21296.1.2.9.1.1.1.22 | ColumnsuperChannelActualCarrierMode | read-only | current | The actual carrier-mode. |
| 1.3.6.1.4.1.21296.1.2.9.2 | NodedigitalTriggerRegistration | |||
| 1.3.6.1.4.1.21296.1.2.9.2.1 | TabledigitalTriggerRegistrationTable | not-accessible | current | Atttributes related to digital trigger fault registration from line system. |
| 1.3.6.1.4.1.21296.1.2.9.2.1.1 | RowdigitalTriggerRegistrationEntry | not-accessible | current | Entry of digitalTriggerRegistrationTable |
| 1.3.6.1.4.1.21296.1.2.9.2.1.1.1 | ColumndigitalTriggerRegistrationNeighborId | read-only | current | ID of provisioned neighbor. Local reference to the neighbor. |
| 1.3.6.1.4.1.21296.1.2.9.2.1.1.2 | ColumndigitalTriggerRegistrationRemoteNodeName | read-only | current | Remote NE Name. |
| 1.3.6.1.4.1.21296.1.2.9.2.1.1.3 | ColumndigitalTriggerRegistrationRemoteNeIp | read-only | current | IP address of the remote NE that has registered for DT fault updates. 0.0.0.0 means that no ip is set to remote-ne-ip. default value :0.0.0.0 |
| 1.3.6.1.4.1.21296.1.2.9.2.1.1.4 | ColumndigitalTriggerRegistrationRemoteEndPoint | read-only | current | Name of the remote end point that has registered for DT fault updates. |
| 1.3.6.1.4.1.21296.1.2.9.2.1.1.5 | ColumndigitalTriggerRegistrationLocalFlowId | read-only | current | Flow ID assigned by GX node for this connection. |
| 1.3.6.1.4.1.21296.1.2.9.2.1.1.6 | ColumndigitalTriggerRegistrationRemoteFlowId | read-only | current | Flow ID received from remote NE. |
| 1.3.6.1.4.1.21296.1.2.9.2.1.1.7 | ColumndigitalTriggerRegistrationDtEncapsulation | read-only | current | Encapsulation option. default value :gre |
| 1.3.6.1.4.1.21296.1.2.9.2.1.1.8 | ColumndigitalTriggerRegistrationLastUpdate | read-only | current | Time of last fault registration request. default value :never |
| 1.3.6.1.4.1.21296.1.2.10 | NodeopticalCarrier | |||
| 1.3.6.1.4.1.21296.1.2.10.1 | NodeopticalCarrierInfo | |||
| 1.3.6.1.4.1.21296.1.2.10.1.1 | TableopticalCarrierTable | not-accessible | current | Optical carrier facility. |
| 1.3.6.1.4.1.21296.1.2.10.1.1.1 | RowopticalCarrierEntry | not-accessible | current | Entry of opticalCarrierTable |
| 1.3.6.1.4.1.21296.1.2.10.1.1.1.1 | ColumnopticalCarrierName | read-only | current | A generic, configurable name for every facility. |
| 1.3.6.1.4.1.21296.1.2.10.1.1.1.2 | ColumnopticalCarrierSupportingCard | read-only | current | Card that holds this facility |
| 1.3.6.1.4.1.21296.1.2.10.1.1.1.3 | ColumnopticalCarrierSupportingPort | read-only | current | Ports that hold this facilityThis is originally a YANG leaf-list, here encoded as a comma separated list of values. |
| 1.3.6.1.4.1.21296.1.2.10.1.1.1.4 | ColumnopticalCarrierSupportingFacilities | read-only | current | An XPath reference to the parent facilities.This is originally a YANG leaf-list, here encoded as a comma separated list of values. |
| 1.3.6.1.4.1.21296.1.2.10.1.1.1.5 | ColumnopticalCarrierSupportedFacilities | read-only | current | An XPath reference to the children facilities.This is originally a YANG leaf-list, here encoded as a comma separated list of values. |
| 1.3.6.1.4.1.21296.1.2.10.1.1.1.6 | ColumnopticalCarrierAID | read-only | current | Resource Access Identifier (AID). Identifies an instance within a specific resource type. |
| 1.3.6.1.4.1.21296.1.2.10.1.1.1.7 | ColumnopticalCarrierLabel | read-only | current | The reply will be truncated in 128 bytes. User label. |
| 1.3.6.1.4.1.21296.1.2.10.1.1.1.8 | ColumnopticalCarrierAdminState | read-only | current | The administrative state of the managed object. default value :unlock |
| 1.3.6.1.4.1.21296.1.2.10.1.1.1.9 | ColumnopticalCarrierOperState | read-only | current | The operational state of this object. default value :disabled |
| 1.3.6.1.4.1.21296.1.2.10.1.1.1.10 | ColumnopticalCarrierAvailState | read-only | current | Availability state of an entity. |
| 1.3.6.1.4.1.21296.1.2.10.1.1.1.11 | ColumnopticalCarrierManagedBy | read-only | current | Describes whether this managed entity was system created or not. Only user created entities can be user deleted. default value :system |
| 1.3.6.1.4.1.21296.1.2.10.1.1.1.12 | ColumnopticalCarrierAlarmReportControl | read-only | current | Controls the reporting of alarms for this particular object. default value :allowed |
| 1.3.6.1.4.1.21296.1.2.10.1.1.1.13 | ColumnopticalCarrierFrequency | read-only | current | The center frequency this carrier is tuned to. Zero means 'not configured'. UNITS:MHz default value :0 |
| 1.3.6.1.4.1.21296.1.2.10.1.1.1.14 | ColumnopticalCarrierFrequencyOffset | read-only | current | A super set range for line and client side carrier, specific sub-range is depend on application. Frequency-offset can be used for bright tuning of the waveleng… |
| 1.3.6.1.4.1.21296.1.2.10.1.1.1.15 | ColumnopticalCarrierWavelength | read-only | current | The wavelength of the optical carrier. UNITS:nm |
| 1.3.6.1.4.1.21296.1.2.10.1.1.1.16 | ColumnopticalCarrierTxPower | read-only | current | The optical carrier's transmit power into the fiber from the transponder's optics. NOTE: The accuracy of the Tx Power can be adjusted in steps of 0.5 dBm. defa… |
| 1.3.6.1.4.1.21296.1.2.10.1.1.1.17 | ColumnopticalCarrierTxCd | read-only | current | The configured transmit pre-compensation chromatic dispersion. UNITS:ps/nm default value :0.0 |
| 1.3.6.1.4.1.21296.1.2.10.1.1.1.18 | ColumnopticalCarrierPreFecQSigDegThreshold | read-only | current | The threshold based on which the PRE-FEC-Q-SIGNAL-DEGRADE alarm is raised. 0 implies threshold crossing alarming disabled. Specific sub-range is per carrier us… |
| 1.3.6.1.4.1.21296.1.2.10.1.1.1.19 | ColumnopticalCarrierPreFecQSigDegHysteresis | read-only | current | Hysteresis to account for raising of the PRE-FEC-Q-SIGNAL-DEGRADE alarm. UNITS:dB default value :0.5 |
| 1.3.6.1.4.1.21296.1.2.10.1.1.1.20 | ColumnopticalCarrierDgdHighThreshold | read-only | current | The threshold to raise the DGD-OORH alarm. It is configurable in some cards and system defined in others. Default value is defined based on card type. UNITS:ps |
| 1.3.6.1.4.1.21296.1.2.10.1.1.1.21 | ColumnopticalCarrierPostFecQSigDegThreshold | read-only | current | The threshold based on which the POST-FEC-Q-SIGNAL-DEGRADE alarm is raised. UNITS:dB default value :18 |
| 1.3.6.1.4.1.21296.1.2.10.1.1.1.22 | ColumnopticalCarrierPostFecQSigDegHysteresis | read-only | current | Hysteresis to account for raising of the POST-FEC-Q-SIGNAL-DEGRADE alarm. UNITS:dB default value :2.5 |
| 1.3.6.1.4.1.21296.1.2.10.1.1.1.23 | ColumnopticalCarrierEnableAdvancedParameters | read-only | current | Controls enabling/disabling of configuring advanced parameters for this object. default value :false |
| 1.3.6.1.4.1.21296.1.2.10.1.1.1.24 | ColumnopticalCarrierCarrierType | read-only | current | Intent is to differentiate the multiple CarierCTPs. default value :ICE6 |
| 1.3.6.1.4.1.21296.1.2.10.1.1.1.25 | ColumnopticalCarrierMediaInterface | read-only | current | Media interface type of ZR tom. default value :400ZR-CFEC-DP-16QAM |
| 1.3.6.1.4.1.21296.1.2.10.1.1.1.26 | ColumnopticalCarrierCapacity | read-only | current | The net capacity of the optical carrier. UNITS:Gbps |
| 1.3.6.1.4.1.21296.1.2.10.1.1.1.27 | ColumnopticalCarrierBaudRate | read-only | current | The modulated symbol rate. UNITS:GBaud |
| 1.3.6.1.4.1.21296.1.2.10.1.1.1.28 | ColumnopticalCarrierGridSpacing | read-only | current | Fixed Grid tunability for new 3rd party TOM. UNITS:GHz default value :100 |
| 1.3.6.1.4.1.21296.1.2.10.1.1.1.29 | ColumnopticalCarrierSpectralBandwidth | read-only | current | Spectral bandwith associated with this carrier(s). UNITS:GHz |
| 1.3.6.1.4.1.21296.1.2.10.1.1.1.30 | ColumnopticalCarrierLoopback | read-only | current | Loopback mode.Useful to debug on the fiber connection. default value :none |
| 1.3.6.1.4.1.21296.1.2.10.1.1.1.31 | ColumnopticalCarrierRate | read-only | current | Carried signal basic rate class. |
| 1.3.6.1.4.1.21296.1.2.10.1.1.1.32 | ColumnopticalCarrierModulationFormat | read-only | current | Current modulation format. |
| 1.3.6.1.4.1.21296.1.2.10.1.1.1.33 | ColumnopticalCarrierLineEncoding | read-only | current | Currently line-encoding mode. default value :non-differential |
| 1.3.6.1.4.1.21296.1.2.10.1.1.1.34 | ColumnopticalCarrierActualFrequency | read-only | current | The actual laser frequency. If rx-frequency is 0, it reflects both Rx and Tx frequency for coherent interface. UNITS:MHz default value :0 |
| 1.3.6.1.4.1.21296.1.2.10.1.1.1.35 | ColumnopticalCarrierRxFrequency | read-only | current | The rx laser frequency. Special for 0 means it is same as tx laser frequency. UNITS:MHz default value :0 |
| 1.3.6.1.4.1.21296.1.2.10.1.1.1.36 | ColumnopticalCarrierActualRxFrequency | read-only | current | The actual rx laser frequency for coherent interface with separating Lo laser from Tx. 0 means Lo and Tx share the same laser where 'frequency' attriute will i… |
| 1.3.6.1.4.1.21296.1.2.10.1.1.1.37 | ColumnopticalCarrierRxAttenuation | read-only | current | This is to support configurable optical attenuation at receiver side which is based on the hardware capability on the port. default value :0.0 |
| 1.3.6.1.4.1.21296.1.2.10.1.1.1.38 | ColumnopticalCarrierTxFilterRollOff | read-only | current | Transmitter filter roll off factor. default value :0.2 |
| 1.3.6.1.4.1.21296.1.2.10.1.1.1.39 | ColumnopticalCarrierPreemphasis | read-only | current | Preemphasis of transmitted signal. default value :enabled |
| 1.3.6.1.4.1.21296.1.2.10.1.1.1.40 | ColumnopticalCarrierPreemphasisValue | read-only | current | Preemphasis of transmitted signal. default value :1.0 |
| 1.3.6.1.4.1.21296.1.2.10.1.1.1.41 | ColumnopticalCarrierCdRangeLow | read-only | current | Low value of chromatic dispersion search range. UNITS:ps/nm default value :-45000 |
| 1.3.6.1.4.1.21296.1.2.10.1.1.1.42 | ColumnopticalCarrierCdRangeHigh | read-only | current | high value of chromatic dispersion search range. UNITS:ps/nm default value :45000 |
| 1.3.6.1.4.1.21296.1.2.10.1.1.1.43 | ColumnopticalCarrierCdCompensationMode | read-only | current | chromatic dispersion compensation value source mode. default value :auto |
| 1.3.6.1.4.1.21296.1.2.10.1.1.1.44 | ColumnopticalCarrierCdCompensationValue | read-only | current | manual chromatic dispersion compensation value UNITS:ps/nm |
| 1.3.6.1.4.1.21296.1.2.10.1.1.1.45 | ColumnopticalCarrierFastSopMode | read-only | current | Specify if enable fast SOP (state of polarization) change tracking; if enabled, the interface will tolerate very fast SOP and transient. default value :disabled |
| 1.3.6.1.4.1.21296.1.2.10.1.1.1.46 | ColumnopticalCarrierBICHM | read-only | current | The BICHM (bit interleaved coded hybrid modulation) incremental step in 1/128 bits/symbol added to base modulation bits/symbol for the hybrid modes modulation-… |
| 1.3.6.1.4.1.21296.1.2.10.1.1.1.47 | ColumnopticalCarrierPropagateShutdown | read-only | current | When the attribute value is set to yes, the transmit laser will be shutdown if the whole service of the direction has signal failure, the function mainly used … |
| 1.3.6.1.4.1.21296.1.2.10.1.1.1.48 | ColumnopticalCarrierPropagateShutdownHoldoffTimer | read-only | current | The hold off time of propagate shutdown. UNITS:milliseconds default value :0 |
| 1.3.6.1.4.1.21296.1.2.10.1.1.1.49 | ColumnopticalCarrierSopDataCollection | read-only | current | Controls enabling/disabling sop data collection, providing the collection interval in ms. Only of relevance for carrier type ICE6. default value :disabled |
| 1.3.6.1.4.1.21296.1.2.10.1.1.1.50 | ColumnopticalCarrierCircuitId | read-only | current | System configured circuit ID, present in XCONs and associated facilities. For facilities, circuit-id is only filled in if an associated XCON exists. Format of … |
| 1.3.6.1.4.1.21296.1.2.10.1.1.1.51 | ColumnopticalCarrierSopVector | read-only | current | The RX SOP (State Of Polarization) Stokes Vector S1 S2 S3, Example: 0.96, -0.12, -0.22. Only of relevance for carrier type OTN. default value : |
| 1.3.6.1.4.1.21296.1.2.10.1.1.1.52 | ColumnopticalCarrierCarrierMode | read-only | current | An acronymized code (handle) that is indicative of the optical carrier line mode (4-tuple) combination. The format is as follows: <Capacity><ClientMode>.<Baud … |
| 1.3.6.1.4.1.21296.1.2.10.1.1.1.53 | ColumnopticalCarrierClientMode | read-only | current | This indicates digital client modes of the signal that is mapped into, and transported by the carriers within this superchannel. |
| 1.3.6.1.4.1.21296.1.2.10.1.1.1.54 | ColumnopticalCarrierApplication | read-only | current | The optical transport application ID this mode is optimized for. |
| 1.3.6.1.4.1.21296.1.2.10.1.1.1.55 | ColumnopticalCarrierSopTrackingMode | read-only | current | The optical transport SOP tracking mode this mode is optimized for. default value :normal |
| 1.3.6.1.4.1.21296.1.2.10.1.1.1.56 | ColumnopticalCarrierActualCarrierMode | read-only | current | The actual carrier-mode. |
| 1.3.6.1.4.1.21296.1.2.10.1.1.1.57 | ColumnopticalCarrierClientSlewRate | read-only | current | Network to client direction PLL slew rate in ppm-steps for all clients supported by the optical-carrier. UNITS:ppm-steps default value :2 |
| 1.3.6.1.4.1.21296.1.2.10.2 | NodeadvancedParameter | |||
| 1.3.6.1.4.1.21296.1.2.10.2.1 | TableadvancedParameterTable | not-accessible | current | The user configured (or overridden) set of advanced parameters. |
| 1.3.6.1.4.1.21296.1.2.10.2.1.1 | RowadvancedParameterEntry | not-accessible | current | Entry of advancedParameterTable |
| 1.3.6.1.4.1.21296.1.2.10.2.1.1.1 | ColumnadvancedParameterName | read-only | current | The reply will be truncated in 128 bytes. Name of the advanced parameter. |
| 1.3.6.1.4.1.21296.1.2.10.2.1.1.2 | ColumnadvancedParameterValue | read-only | current | The reply will be truncated in 128 bytes. Value of the advanced parameter. |
| 1.3.6.1.4.1.21296.1.2.10.2.1.1.3 | ColumnadvancedParameterStatus | read-only | current | State of the advanced parameter (as observable on the system) once it is configured. default value :unknown |
| 1.3.6.1.4.1.21296.1.2.10.3 | NodecurrentAdvancedParameter | |||
| 1.3.6.1.4.1.21296.1.2.10.3.1 | TablecurrentAdvancedParameterTable | not-accessible | current | The current value for a supported advanced parameter. |
| 1.3.6.1.4.1.21296.1.2.10.3.1.1 | RowcurrentAdvancedParameterEntry | not-accessible | current | Entry of currentAdvancedParameterTable |
| 1.3.6.1.4.1.21296.1.2.10.3.1.1.1 | ColumncurrentAdvancedParameterName | read-only | current | The reply will be truncated in 128 bytes. Name of the advanced parameter. |
| 1.3.6.1.4.1.21296.1.2.10.3.1.1.2 | ColumncurrentAdvancedParameterValue | read-only | current | The reply will be truncated in 128 bytes. Value of the advanced parameter. |
| 1.3.6.1.4.1.21296.1.2.11 | NodeopticalChannel | |||
| 1.3.6.1.4.1.21296.1.2.11.1 | NodeopticalChannelInfo | |||
| 1.3.6.1.4.1.21296.1.2.11.1.1 | TableopticalChannelTable | not-accessible | current | The OCh is a dummy, place-holder object merely existing for the purposes of object model hierarchy. All attributes of OCh are marked as read-only. |
| 1.3.6.1.4.1.21296.1.2.11.1.1.1 | RowopticalChannelEntry | not-accessible | current | Entry of opticalChannelTable |
| 1.3.6.1.4.1.21296.1.2.11.1.1.1.1 | ColumnopticalChannelName | read-only | current | A generic, configurable name for every facility. |
| 1.3.6.1.4.1.21296.1.2.11.1.1.1.2 | ColumnopticalChannelSupportingCard | read-only | current | Card that holds this facility |
| 1.3.6.1.4.1.21296.1.2.11.1.1.1.3 | ColumnopticalChannelSupportingPort | read-only | current | Ports that hold this facilityThis is originally a YANG leaf-list, here encoded as a comma separated list of values. |
| 1.3.6.1.4.1.21296.1.2.11.1.1.1.4 | ColumnopticalChannelSupportingFacilities | read-only | current | An XPath reference to the parent facilities.This is originally a YANG leaf-list, here encoded as a comma separated list of values. |
| 1.3.6.1.4.1.21296.1.2.11.1.1.1.5 | ColumnopticalChannelSupportedFacilities | read-only | current | An XPath reference to the children facilities.This is originally a YANG leaf-list, here encoded as a comma separated list of values. |
| 1.3.6.1.4.1.21296.1.2.11.1.1.1.6 | ColumnopticalChannelAID | read-only | current | Resource Access Identifier (AID). Identifies an instance within a specific resource type. |
| 1.3.6.1.4.1.21296.1.2.11.1.1.1.7 | ColumnopticalChannelLabel | read-only | current | The reply will be truncated in 128 bytes. User label. |
| 1.3.6.1.4.1.21296.1.2.11.1.1.1.8 | ColumnopticalChannelAdminState | read-only | current | The administrative state of the managed object. default value :unlock |
| 1.3.6.1.4.1.21296.1.2.11.1.1.1.9 | ColumnopticalChannelOperState | read-only | current | The operational state of this object. default value :disabled |
| 1.3.6.1.4.1.21296.1.2.11.1.1.1.10 | ColumnopticalChannelAvailState | read-only | current | Availability state of an entity. |
| 1.3.6.1.4.1.21296.1.2.11.1.1.1.11 | ColumnopticalChannelManagedBy | read-only | current | Describes whether this managed entity was system created or not. Only user created entities can be user deleted. default value :system |
| 1.3.6.1.4.1.21296.1.2.12 | Nodeotu | |||
| 1.3.6.1.4.1.21296.1.2.12.1 | NodeotuInfo | |||
| 1.3.6.1.4.1.21296.1.2.12.1.1 | TableotuTable | not-accessible | current | Facility describing the OTUCn/OTUk according with standard ITU-T G.709. |
| 1.3.6.1.4.1.21296.1.2.12.1.1.1 | RowotuEntry | not-accessible | current | Entry of otuTable |
| 1.3.6.1.4.1.21296.1.2.12.1.1.1.1 | ColumnotuName | read-only | current | A generic, configurable name for every facility. |
| 1.3.6.1.4.1.21296.1.2.12.1.1.1.2 | ColumnotuSupportingCard | read-only | current | Card that holds this facility |
| 1.3.6.1.4.1.21296.1.2.12.1.1.1.3 | ColumnotuSupportingPort | read-only | current | Ports that hold this facilityThis is originally a YANG leaf-list, here encoded as a comma separated list of values. |
| 1.3.6.1.4.1.21296.1.2.12.1.1.1.4 | ColumnotuSupportingFacilities | read-only | current | An XPath reference to the parent facilities.This is originally a YANG leaf-list, here encoded as a comma separated list of values. |
| 1.3.6.1.4.1.21296.1.2.12.1.1.1.5 | ColumnotuSupportedFacilities | read-only | current | An XPath reference to the children facilities.This is originally a YANG leaf-list, here encoded as a comma separated list of values. |
| 1.3.6.1.4.1.21296.1.2.12.1.1.1.6 | ColumnotuAID | read-only | current | Resource Access Identifier (AID). Identifies an instance within a specific resource type. |
| 1.3.6.1.4.1.21296.1.2.12.1.1.1.7 | ColumnotuLabel | read-only | current | The reply will be truncated in 128 bytes. User label. |
| 1.3.6.1.4.1.21296.1.2.12.1.1.1.8 | ColumnotuAdminState | read-only | current | The administrative state of the managed object. default value :unlock |
| 1.3.6.1.4.1.21296.1.2.12.1.1.1.9 | ColumnotuOperState | read-only | current | The operational state of this object. default value :disabled |
| 1.3.6.1.4.1.21296.1.2.12.1.1.1.10 | ColumnotuAvailState | read-only | current | Availability state of an entity. |
| 1.3.6.1.4.1.21296.1.2.12.1.1.1.11 | ColumnotuManagedBy | read-only | current | Describes whether this managed entity was system created or not. Only user created entities can be user deleted. default value :system |
| 1.3.6.1.4.1.21296.1.2.12.1.1.1.12 | ColumnotuAlarmReportControl | read-only | current | Controls the reporting of alarms for this particular object. default value :allowed |
| 1.3.6.1.4.1.21296.1.2.12.1.1.1.13 | ColumnotuType | read-only | current | The protocol type of the OTUk/OTUCn client. |
| 1.3.6.1.4.1.21296.1.2.12.1.1.1.14 | ColumnotuRate | read-only | current | The speed/rate of the OTUk/OTUCn client interface. |
| 1.3.6.1.4.1.21296.1.2.12.1.1.1.15 | ColumnotuOtuName | read-only | current | A system-defined user friendly name for this otu, considering both the type and the rate. Examples: OTUC4, OTUC5i90 |
| 1.3.6.1.4.1.21296.1.2.12.1.1.1.16 | ColumnotuServiceMode | read-only | current | This attribute is to align with legacy OTN virtualization attribute (SM). The 'service mode' attribute indicates the OTUk/OTUCn client's treatment/processing v… |
| 1.3.6.1.4.1.21296.1.2.12.1.1.1.17 | ColumnotuServiceModeQualifier | read-only | current | This attribute is to align with legacy OTN virtualization attribute (SMQ). The 'service mode qualifier' attribute further adds to the 'service mode' attribute … |
| 1.3.6.1.4.1.21296.1.2.12.1.1.1.18 | ColumnotuFecMode | read-only | current | The configured Forward Error Correction (FEC) mode on the OTUk/OTUCn client. default value :enabled |
| 1.3.6.1.4.1.21296.1.2.12.1.1.1.19 | ColumnotuFecGenerationMode | read-only | current | The configured FEC generation mode on the OTUk/OTUCn client towards the far-end receiver. default value :enabled |
| 1.3.6.1.4.1.21296.1.2.12.1.1.1.20 | ColumnotuLoopback | read-only | current | Loopback mode.Useful to debug on the fiber connection. default value :none |
| 1.3.6.1.4.1.21296.1.2.12.1.1.1.21 | ColumnotuFecType | read-only | current | The FEC type default value :noFEC |
| 1.3.6.1.4.1.21296.1.2.12.1.1.1.22 | ColumnotuLoopbackMode | read-only | current | Indicates loopback action for facility or terminal. default value :loopback |
| 1.3.6.1.4.1.21296.1.2.12.1.1.1.23 | ColumnotuCircuitId | read-only | current | System configured circuit ID, present in XCONs and associated facilities. For facilities, circuit-id is only filled in if an associated XCON exists. Format of … |
| 1.3.6.1.4.1.21296.1.2.12.1.1.1.24 | ColumnotuTxMappingMode | read-only | current | The tx mapping mode of client port. The possible values are dependent on the HW and configuration. default value :none |
| 1.3.6.1.4.1.21296.1.2.12.1.1.1.25 | ColumnotuExpectedMappingMode | read-only | current | The expected mapping mode of client port. The possible values are dependent on the HW and configuration. default value :none |
| 1.3.6.1.4.1.21296.1.2.12.1.1.1.26 | ColumnotuParent | read-only | current | For line OTU, indicates the parent facility. |
| 1.3.6.1.4.1.21296.1.2.12.1.1.1.27 | ColumnotuTimeSlots | read-only | current | Time slots of the ODU. |
| 1.3.6.1.4.1.21296.1.2.12.2 | NodeotuDiagnostics | |||
| 1.3.6.1.4.1.21296.1.2.12.2.1 | TableotuDiagnosticsTable | not-accessible | current | Set of attributes associated with OTU diagnostics.Each direction has their own values. |
| 1.3.6.1.4.1.21296.1.2.12.2.1.1 | RowotuDiagnosticsEntry | not-accessible | current | Entry of otuDiagnosticsTable |
| 1.3.6.1.4.1.21296.1.2.12.2.1.1.1 | ColumnotuDiagnosticsDirection | read-only | current | Diagnostics direction.Can be ingress or egress. |
| 1.3.6.1.4.1.21296.1.2.12.2.1.1.2 | ColumnotuDiagnosticsMonitoringMode | read-only | current | The monitoring mode on the ODU/OTU client. default value :intrusive |
| 1.3.6.1.4.1.21296.1.2.12.2.1.1.3 | ColumnotuDiagnosticsTtiStyle | read-only | current | The configured mode of the TTI for this OTU/ODU client or OTS. default value :ITU-T-G709 |
| 1.3.6.1.4.1.21296.1.2.12.2.1.1.4 | ColumnotuDiagnosticsTtiMismatchAlarmReporting | read-only | current | Indicates if TTI-Mismatch (TIM) alarm is reported or not. If it is to be reported, indicates the criteria based on with the TIM alarm is reported. default valu… |
| 1.3.6.1.4.1.21296.1.2.12.2.1.1.5 | ColumnotuDiagnosticsTxTti | read-only | current | Transmit TTI - Sent by this facility to the far-end remote facility. Conditions:tti-style = 'proprietary' |
| 1.3.6.1.4.1.21296.1.2.12.2.1.1.6 | ColumnotuDiagnosticsRxTti | read-only | current | Receive TTI - Received by this facility from the far-end remote facility. Conditions:tti-style = 'proprietary' |
| 1.3.6.1.4.1.21296.1.2.12.2.1.1.7 | ColumnotuDiagnosticsRxTtiHex | read-only | current | Receive TTI in HEX. Conditions:tti-style = 'proprietary' |
| 1.3.6.1.4.1.21296.1.2.12.2.1.1.8 | ColumnotuDiagnosticsExpectedTti | read-only | current | Expected TTI - The TTI this facility expects to receive from the far-end remote facility. Conditions:tti-style = 'proprietary' default value : |
| 1.3.6.1.4.1.21296.1.2.12.2.1.1.9 | ColumnotuDiagnosticsExpectedSapi | read-only | current | The expected SAPI (Source Access Point Identifier). Conditions:tti-style = 'ITU-T-G709' default value : |
| 1.3.6.1.4.1.21296.1.2.12.2.1.1.10 | ColumnotuDiagnosticsExpectedDapi | read-only | current | The expected DAPI (Destination Access Point Identifier). Conditions:tti-style = 'ITU-T-G709' default value : |
| 1.3.6.1.4.1.21296.1.2.12.2.1.1.11 | ColumnotuDiagnosticsExpectedOperator | read-only | current | The expected operator specific bytes. Conditions:tti-style = 'ITU-T-G709' default value : |
| 1.3.6.1.4.1.21296.1.2.12.2.1.1.12 | ColumnotuDiagnosticsTxSapi | read-only | current | The transmitted SAPI bytes. Conditions:tti-style = 'ITU-T-G709' default value : |
| 1.3.6.1.4.1.21296.1.2.12.2.1.1.13 | ColumnotuDiagnosticsTxDapi | read-only | current | The transmitted DAPI bytes. Conditions:tti-style = 'ITU-T-G709' default value : |
| 1.3.6.1.4.1.21296.1.2.12.2.1.1.14 | ColumnotuDiagnosticsTxOperator | read-only | current | The transmitted operator specific bytes. Conditions:tti-style = 'ITU-T-G709' |
| 1.3.6.1.4.1.21296.1.2.12.2.1.1.15 | ColumnotuDiagnosticsRxSapi | read-only | current | The received SAPI bytes as an ASCII string; will not be available if bytes cannot be encoded as a printable string. Conditions:tti-style = 'ITU-T-G709' |
| 1.3.6.1.4.1.21296.1.2.12.2.1.1.16 | ColumnotuDiagnosticsRxSapiHex | read-only | current | Received SAPI in HEX. Conditions:tti-style = 'ITU-T-G709' |
| 1.3.6.1.4.1.21296.1.2.12.2.1.1.17 | ColumnotuDiagnosticsRxDapi | read-only | current | The received DAPI bytes as an ASCII string; will not be available if bytes cannot be encoded as a printable string. Conditions:tti-style = 'ITU-T-G709' |
| 1.3.6.1.4.1.21296.1.2.12.2.1.1.18 | ColumnotuDiagnosticsRxDapiHex | read-only | current | Received DAPI in HEX. Conditions:tti-style = 'ITU-T-G709' |
| 1.3.6.1.4.1.21296.1.2.12.2.1.1.19 | ColumnotuDiagnosticsRxOperator | read-only | current | The received operation specific bytes as an ASCII string; will not be available if bytes cannot be encoded as a printable string. Conditions:tti-style = 'ITU-T… |
| 1.3.6.1.4.1.21296.1.2.12.2.1.1.20 | ColumnotuDiagnosticsRxOperatorHex | read-only | current | Received operator in HEX. Conditions:tti-style = 'ITU-T-G709' |
| 1.3.6.1.4.1.21296.1.2.12.2.1.1.21 | ColumnotuDiagnosticsDegradeInterval | read-only | current | The consecutive number of 1s intervals with the number of detected block errors exceeding the block error threshold for each of those seconds for the purposes … |
| 1.3.6.1.4.1.21296.1.2.12.2.1.1.22 | ColumnotuDiagnosticsDegradeThreshold | read-only | current | The threshold in percentage of block errors versus total blocks at which a degrade-interval number of seconds will be considered degraded for the purposes of S… |
| 1.3.6.1.4.1.21296.1.2.12.2.1.1.23 | ColumnotuDiagnosticsTimActEnabled | read-only | current | Support configurable TIM action which decide if insert maintenance signal per TIM: enable or disable, default disable default value :disabled |
| 1.3.6.1.4.1.21296.1.2.12.2.1.1.24 | ColumnotuDiagnosticsNmoperAlarmReporting | read-only | current | Indicates if a Neighbor Mismatch TTI Operator-Specific field based (NMOPER) alarm is reported or not. default value :disabled |
| 1.3.6.1.4.1.21296.1.2.13 | Nodeodu | |||
| 1.3.6.1.4.1.21296.1.2.13.1 | NodeoduInfo | |||
| 1.3.6.1.4.1.21296.1.2.13.1.1 | TableoduTable | not-accessible | current | ODUCni/ODUki facility, representing both line side and client side ODUs. Represents both GX proprietary line-side ODUki/ODUCni protocol, as well as ITU standar… |
| 1.3.6.1.4.1.21296.1.2.13.1.1.1 | RowoduEntry | not-accessible | current | Entry of oduTable |
| 1.3.6.1.4.1.21296.1.2.13.1.1.1.1 | ColumnoduName | read-only | current | A generic, configurable name for every facility. |
| 1.3.6.1.4.1.21296.1.2.13.1.1.1.2 | ColumnoduSupportingCard | read-only | current | Card that holds this facility |
| 1.3.6.1.4.1.21296.1.2.13.1.1.1.3 | ColumnoduSupportingPort | read-only | current | Ports that hold this facilityThis is originally a YANG leaf-list, here encoded as a comma separated list of values. |
| 1.3.6.1.4.1.21296.1.2.13.1.1.1.4 | ColumnoduSupportingFacilities | read-only | current | An XPath reference to the parent facilities.This is originally a YANG leaf-list, here encoded as a comma separated list of values. |
| 1.3.6.1.4.1.21296.1.2.13.1.1.1.5 | ColumnoduSupportedFacilities | read-only | current | An XPath reference to the children facilities.This is originally a YANG leaf-list, here encoded as a comma separated list of values. |
| 1.3.6.1.4.1.21296.1.2.13.1.1.1.6 | ColumnoduAID | read-only | current | Resource Access Identifier (AID). Identifies an instance within a specific resource type. |
| 1.3.6.1.4.1.21296.1.2.13.1.1.1.7 | ColumnoduLabel | read-only | current | The reply will be truncated in 128 bytes. User label. |
| 1.3.6.1.4.1.21296.1.2.13.1.1.1.8 | ColumnoduAdminState | read-only | current | The administrative state of the managed object. default value :unlock |
| 1.3.6.1.4.1.21296.1.2.13.1.1.1.9 | ColumnoduOperState | read-only | current | The operational state of this object. default value :disabled |
| 1.3.6.1.4.1.21296.1.2.13.1.1.1.10 | ColumnoduAvailState | read-only | current | Availability state of an entity. |
| 1.3.6.1.4.1.21296.1.2.13.1.1.1.11 | ColumnoduManagedBy | read-only | current | Describes whether this managed entity was system created or not. Only user created entities can be user deleted. default value :user |
| 1.3.6.1.4.1.21296.1.2.13.1.1.1.12 | ColumnoduAlarmReportControl | read-only | current | Controls the reporting of alarms for this particular object. default value :allowed |
| 1.3.6.1.4.1.21296.1.2.13.1.1.1.13 | ColumnoduParentOdu | read-only | current | For low order ODUs, points to the the parent HO-ODU name. |
| 1.3.6.1.4.1.21296.1.2.13.1.1.1.14 | ColumnoduType | read-only | current | The protocol type of the ODUk/ODUCn client. |
| 1.3.6.1.4.1.21296.1.2.13.1.1.1.15 | ColumnoduRate | read-only | current | The speed/rate of the ODUk/ODUCn client interface. |
| 1.3.6.1.4.1.21296.1.2.13.1.1.1.16 | ColumnoduOduName | read-only | current | A system-defined user friendly name for this odu, considering both the type and the rate. Examples: ODU4, ODUC8i |
| 1.3.6.1.4.1.21296.1.2.13.1.1.1.17 | ColumnoduClass | read-only | current | This attribute indicates the class/category of the ODUCn/ODUk entity. 'High order' refers to the top-most ODUCn/ODUk entity that is created by the system. All … |
| 1.3.6.1.4.1.21296.1.2.13.1.1.1.18 | ColumnoduServiceMode | read-only | current | This attribute is to align with legacy OTN virtualization attribute (SM). The 'service mode' attribute indicates the ODUk/ODUCn client's treatment/processing v… |
| 1.3.6.1.4.1.21296.1.2.13.1.1.1.19 | ColumnoduServiceModeQualifier | read-only | current | This attribute is to align with legacy OTN virtualization attribute (SMQ). The 'service mode qualifier' attribute further adds to the 'service mode' attribute … |
| 1.3.6.1.4.1.21296.1.2.13.1.1.1.20 | ColumnoduTimeSlots | read-only | current | Time slots of the ODU. |
| 1.3.6.1.4.1.21296.1.2.13.1.1.1.21 | ColumnoduInstanceId | read-only | current | Optional parameter on LO-ODU creation, identifies the ODU within the parent/high-order ODU. If not provided, it is automatically derived. Max value depends on … |
| 1.3.6.1.4.1.21296.1.2.13.1.1.1.22 | ColumnoduTotalTimeSlots | read-only | current | Number of OPUk/OPUCn time slots that are part of this ODUk/ODUCn container. Conditions:../class = 'high-order' |
| 1.3.6.1.4.1.21296.1.2.13.1.1.1.23 | ColumnoduAvailableTimeSlots | read-only | current | A list of all OPUk/OPUCn time-slots that are available for provisioning new services. Conditions:../class='high-order' |
| 1.3.6.1.4.1.21296.1.2.13.1.1.1.24 | ColumnoduClientDefectIndicator | read-only | current | Indicates current defect status on client side. default value :none |
| 1.3.6.1.4.1.21296.1.2.13.1.1.1.25 | ColumnoduTribPortNumber | read-only | current | Number of OPUk/OPUCn trib port that are part of this ODUk/ODUCn container. |
| 1.3.6.1.4.1.21296.1.2.13.1.1.1.26 | ColumnoduOpucnTimeSlots | read-only | current | Opucn Time slots of the ODUCn. |
| 1.3.6.1.4.1.21296.1.2.13.1.1.1.27 | ColumnoduLoopback | read-only | current | Loopback mode.Useful to debug on the fiber connection. default value :none |
| 1.3.6.1.4.1.21296.1.2.13.1.1.1.28 | ColumnoduLoopbackMode | read-only | current | Indicates loopback action for facility or terminal. default value :loopback |
| 1.3.6.1.4.1.21296.1.2.13.1.1.1.29 | ColumnoduRxPayloadType | read-only | current | Received payload-type of ODU. |
| 1.3.6.1.4.1.21296.1.2.13.1.1.1.30 | ColumnoduTxPayloadType | read-only | current | Transmitter payload-type of ODU |
| 1.3.6.1.4.1.21296.1.2.13.1.1.1.31 | ColumnoduExpectedPayloadType | read-only | current | Expected payload-type of ODUThis is originally a YANG leaf-list, here encoded as a comma separated list of values. |
| 1.3.6.1.4.1.21296.1.2.13.1.1.1.32 | ColumnoduDelayMeasurementEnable | read-only | current | The enable switching of delay-measurement function, when applicable. default value :disabled |
| 1.3.6.1.4.1.21296.1.2.13.1.1.1.33 | ColumnoduMsimConfig | read-only | current | Specifies MSIM alarm reporting or not when msi value received not followed G.709 definition. default value :enabled |
| 1.3.6.1.4.1.21296.1.2.13.1.1.1.34 | ColumnoduClientSignalType | read-only | current | Client signal type for ODUflex CBR client. Applied to 200/400 GBE client on CHM1R and FC4/8/16 for UTM2 It is set automatically for the client side ODU, and ne… |
| 1.3.6.1.4.1.21296.1.2.13.1.1.1.35 | ColumnoduAcceptedTribPortNumber | read-only | current | Received and accepted Tributary Port Number for the LO-ODU entity. |
| 1.3.6.1.4.1.21296.1.2.13.1.1.1.36 | ColumnoduExpectedTribPortNumber | read-only | current | Expected Tributary Port Number for the LO-ODU entity. |
| 1.3.6.1.4.1.21296.1.2.13.1.1.1.37 | ColumnoduAcceptedTimeSlots | read-only | current | Received and accepted TS for the LO-ODU entity. |
| 1.3.6.1.4.1.21296.1.2.13.1.1.1.38 | ColumnoduExpectedTimeSlots | read-only | current | Expected TS for the LO-ODU entity. |
| 1.3.6.1.4.1.21296.1.2.13.1.1.1.39 | ColumnoduRxMsi | read-only | current | The reply will be truncated in 128 bytes. Received and accepted MSI values (up to 80), including a valid/invalid indication (valid if acceptance process succes… |
| 1.3.6.1.4.1.21296.1.2.13.1.1.1.40 | ColumnoduRxMsiHex | read-only | current | The reply will be truncated in 128 bytes. Received and accepted MSI hex values (up to 80) (if acceptance process was not successful the last accepted MSI set i… |
| 1.3.6.1.4.1.21296.1.2.13.1.1.1.41 | ColumnoduExpectedMsi | read-only | current | The reply will be truncated in 128 bytes. Expected MSI values (up to 80). For format see rx-msi without valid/invalid flag. User-friendly representation of exp… |
| 1.3.6.1.4.1.21296.1.2.13.1.1.1.42 | ColumnoduExpectedMsiHex | read-only | current | The reply will be truncated in 128 bytes. Expected MSI hex values (up to 80). |
| 1.3.6.1.4.1.21296.1.2.13.1.1.1.43 | ColumnoduCircuitId | read-only | current | System configured circuit ID, present in XCONs and associated facilities. For facilities, circuit-id is only filled in if an associated XCON exists. Format of … |
| 1.3.6.1.4.1.21296.1.2.13.1.1.1.46 | ColumnoduUsedResources | read-only | current | List of used resources.This is originally a YANG leaf-list, here encoded as a comma separated list of values. |
| 1.3.6.1.4.1.21296.1.2.13.2 | NodeoduDiagnostics | |||
| 1.3.6.1.4.1.21296.1.2.13.2.1 | TableoduDiagnosticsTable | not-accessible | current | Set of attributes associated with ODU diagnostics.Each direction has their own values. |
| 1.3.6.1.4.1.21296.1.2.13.2.1.1 | RowoduDiagnosticsEntry | not-accessible | current | Entry of oduDiagnosticsTable |
| 1.3.6.1.4.1.21296.1.2.13.2.1.1.1 | ColumnoduDiagnosticsDirection | read-only | current | Diagnostics direction.Can be ingress or egress. |
| 1.3.6.1.4.1.21296.1.2.13.2.1.1.2 | ColumnoduDiagnosticsMonitoringMode | read-only | current | The monitoring mode on the ODU/OTU client. default value :intrusive |
| 1.3.6.1.4.1.21296.1.2.13.2.1.1.3 | ColumnoduDiagnosticsTtiStyle | read-only | current | The configured mode of the TTI for this OTU/ODU client or OTS. default value :ITU-T-G709 |
| 1.3.6.1.4.1.21296.1.2.13.2.1.1.4 | ColumnoduDiagnosticsTtiMismatchAlarmReporting | read-only | current | Indicates if TTI-Mismatch (TIM) alarm is reported or not. If it is to be reported, indicates the criteria based on with the TIM alarm is reported. default valu… |
| 1.3.6.1.4.1.21296.1.2.13.2.1.1.5 | ColumnoduDiagnosticsTxTti | read-only | current | Transmit TTI - Sent by this facility to the far-end remote facility. Conditions:tti-style = 'proprietary' |
| 1.3.6.1.4.1.21296.1.2.13.2.1.1.6 | ColumnoduDiagnosticsRxTti | read-only | current | Receive TTI - Received by this facility from the far-end remote facility. Conditions:tti-style = 'proprietary' |
| 1.3.6.1.4.1.21296.1.2.13.2.1.1.7 | ColumnoduDiagnosticsRxTtiHex | read-only | current | Receive TTI in HEX. Conditions:tti-style = 'proprietary' |
| 1.3.6.1.4.1.21296.1.2.13.2.1.1.8 | ColumnoduDiagnosticsExpectedTti | read-only | current | Expected TTI - The TTI this facility expects to receive from the far-end remote facility. Conditions:tti-style = 'proprietary' default value : |
| 1.3.6.1.4.1.21296.1.2.13.2.1.1.9 | ColumnoduDiagnosticsExpectedSapi | read-only | current | The expected SAPI (Source Access Point Identifier). Conditions:tti-style = 'ITU-T-G709' default value : |
| 1.3.6.1.4.1.21296.1.2.13.2.1.1.10 | ColumnoduDiagnosticsExpectedDapi | read-only | current | The expected DAPI (Destination Access Point Identifier). Conditions:tti-style = 'ITU-T-G709' default value : |
| 1.3.6.1.4.1.21296.1.2.13.2.1.1.11 | ColumnoduDiagnosticsExpectedOperator | read-only | current | The expected operator specific bytes. Conditions:tti-style = 'ITU-T-G709' default value : |
| 1.3.6.1.4.1.21296.1.2.13.2.1.1.12 | ColumnoduDiagnosticsTxSapi | read-only | current | The transmitted SAPI bytes. Conditions:tti-style = 'ITU-T-G709' default value : |
| 1.3.6.1.4.1.21296.1.2.13.2.1.1.13 | ColumnoduDiagnosticsTxDapi | read-only | current | The transmitted DAPI bytes. Conditions:tti-style = 'ITU-T-G709' default value : |
| 1.3.6.1.4.1.21296.1.2.13.2.1.1.14 | ColumnoduDiagnosticsTxOperator | read-only | current | The transmitted operator specific bytes. Conditions:tti-style = 'ITU-T-G709' |
| 1.3.6.1.4.1.21296.1.2.13.2.1.1.15 | ColumnoduDiagnosticsRxSapi | read-only | current | The received SAPI bytes as an ASCII string; will not be available if bytes cannot be encoded as a printable string. Conditions:tti-style = 'ITU-T-G709' |
| 1.3.6.1.4.1.21296.1.2.13.2.1.1.16 | ColumnoduDiagnosticsRxSapiHex | read-only | current | Received SAPI in HEX. Conditions:tti-style = 'ITU-T-G709' |
| 1.3.6.1.4.1.21296.1.2.13.2.1.1.17 | ColumnoduDiagnosticsRxDapi | read-only | current | The received DAPI bytes as an ASCII string; will not be available if bytes cannot be encoded as a printable string. Conditions:tti-style = 'ITU-T-G709' |
| 1.3.6.1.4.1.21296.1.2.13.2.1.1.18 | ColumnoduDiagnosticsRxDapiHex | read-only | current | Received DAPI in HEX. Conditions:tti-style = 'ITU-T-G709' |
| 1.3.6.1.4.1.21296.1.2.13.2.1.1.19 | ColumnoduDiagnosticsRxOperator | read-only | current | The received operation specific bytes as an ASCII string; will not be available if bytes cannot be encoded as a printable string. Conditions:tti-style = 'ITU-T… |
| 1.3.6.1.4.1.21296.1.2.13.2.1.1.20 | ColumnoduDiagnosticsRxOperatorHex | read-only | current | Received operator in HEX. Conditions:tti-style = 'ITU-T-G709' |
| 1.3.6.1.4.1.21296.1.2.13.2.1.1.21 | ColumnoduDiagnosticsDegradeInterval | read-only | current | The consecutive number of 1s intervals with the number of detected block errors exceeding the block error threshold for each of those seconds for the purposes … |
| 1.3.6.1.4.1.21296.1.2.13.2.1.1.22 | ColumnoduDiagnosticsDegradeThreshold | read-only | current | The threshold in percentage of block errors versus total blocks at which a degrade-interval number of seconds will be considered degraded for the purposes of S… |
| 1.3.6.1.4.1.21296.1.2.13.2.1.1.23 | ColumnoduDiagnosticsTimActEnabled | read-only | current | Support configurable TIM action which decide if insert maintenance signal per TIM: enable or disable, default disable default value :disabled |
| 1.3.6.1.4.1.21296.1.2.13.2.1.1.24 | ColumnoduDiagnosticsTestSignalType | read-only | current | The type of test pattern that is injected. default value :none |
| 1.3.6.1.4.1.21296.1.2.13.2.1.1.25 | ColumnoduDiagnosticsTestSignalDirection | read-only | current | The direction of the test signal. default value :ingress |
| 1.3.6.1.4.1.21296.1.2.13.2.1.1.26 | ColumnoduDiagnosticsTestSignalMonitoring | read-only | current | Monitor the incoming test signals for diagnostics. default value :false |
| 1.3.6.1.4.1.21296.1.2.13.2.1.1.35 | ColumnoduDiagnosticsTestSignalMonitoringType | read-only | current | The type of test pattern that is monitored. default value :none |
| 1.3.6.1.4.1.21296.1.2.14 | Nodeethernet | |||
| 1.3.6.1.4.1.21296.1.2.14.1 | NodeethernetInfo | |||
| 1.3.6.1.4.1.21296.1.2.14.1.1 | TableethernetTable | not-accessible | current | Ethernet facility. |
| 1.3.6.1.4.1.21296.1.2.14.1.1.1 | RowethernetEntry | not-accessible | current | Entry of ethernetTable |
| 1.3.6.1.4.1.21296.1.2.14.1.1.1.1 | ColumnethernetName | read-only | current | A generic, configurable name for every facility. |
| 1.3.6.1.4.1.21296.1.2.14.1.1.1.2 | ColumnethernetSupportingCard | read-only | current | Card that holds this facility |
| 1.3.6.1.4.1.21296.1.2.14.1.1.1.3 | ColumnethernetSupportingPort | read-only | current | Ports that hold this facilityThis is originally a YANG leaf-list, here encoded as a comma separated list of values. |
| 1.3.6.1.4.1.21296.1.2.14.1.1.1.4 | ColumnethernetSupportingFacilities | read-only | current | An XPath reference to the parent facilities.This is originally a YANG leaf-list, here encoded as a comma separated list of values. |
| 1.3.6.1.4.1.21296.1.2.14.1.1.1.5 | ColumnethernetSupportedFacilities | read-only | current | An XPath reference to the children facilities.This is originally a YANG leaf-list, here encoded as a comma separated list of values. |
| 1.3.6.1.4.1.21296.1.2.14.1.1.1.6 | ColumnethernetAID | read-only | current | Resource Access Identifier (AID). Identifies an instance within a specific resource type. |
| 1.3.6.1.4.1.21296.1.2.14.1.1.1.7 | ColumnethernetLabel | read-only | current | The reply will be truncated in 128 bytes. User label. |
| 1.3.6.1.4.1.21296.1.2.14.1.1.1.8 | ColumnethernetAdminState | read-only | current | The administrative state of the managed object. default value :unlock |
| 1.3.6.1.4.1.21296.1.2.14.1.1.1.9 | ColumnethernetOperState | read-only | current | The operational state of this object. default value :disabled |
| 1.3.6.1.4.1.21296.1.2.14.1.1.1.10 | ColumnethernetAvailState | read-only | current | Availability state of an entity. |
| 1.3.6.1.4.1.21296.1.2.14.1.1.1.11 | ColumnethernetManagedBy | read-only | current | Describes whether this managed entity was system created or not. Only user created entities can be user deleted. default value :system |
| 1.3.6.1.4.1.21296.1.2.14.1.1.1.12 | ColumnethernetAlarmReportControl | read-only | current | Controls the reporting of alarms for this particular object. default value :allowed |
| 1.3.6.1.4.1.21296.1.2.14.1.1.1.13 | ColumnethernetClientType | read-only | current | The protocol type of the Ethernet client. |
| 1.3.6.1.4.1.21296.1.2.14.1.1.1.14 | ColumnethernetServiceMode | read-only | current | Service mode for the ethernet facility. default value :transport |
| 1.3.6.1.4.1.21296.1.2.14.1.1.1.15 | ColumnethernetServiceModeQualifier | read-only | current | Service mode qualifier for the ethernet facility. default value :none |
| 1.3.6.1.4.1.21296.1.2.14.1.1.1.16 | ColumnethernetSpeed | read-only | current | The speed/rate of the Ethernet client interfaces. UNITS:Gbit/s |
| 1.3.6.1.4.1.21296.1.2.14.1.1.1.17 | ColumnethernetFecAbility | read-only | current | Indicates the Ethernet client's capability to support FEC (Forward Error Correction). default value :not-supported |
| 1.3.6.1.4.1.21296.1.2.14.1.1.1.18 | ColumnethernetFecMode | read-only | current | The configured FEC mode on the Ethernet client. Default is dependent on configured client type. default value :disabled |
| 1.3.6.1.4.1.21296.1.2.14.1.1.1.19 | ColumnethernetLoopback | read-only | current | Loopback mode.Useful to debug on the fiber connection. default value :none |
| 1.3.6.1.4.1.21296.1.2.14.1.1.1.20 | ColumnethernetFecDegradedSerMonitoring | read-only | current | Allows to enable monitoring for FEC-DEGRADED-SER alarm. default value :disabled |
| 1.3.6.1.4.1.21296.1.2.14.1.1.1.21 | ColumnethernetFecDegradedSerActivateThreshold | read-only | current | FEC-DEGRADED-SER alarm asserted if average SER, computed over accumulated FEC symbol errors in the monitoring period exceed this threshold. UNITS:averageSER de… |
| 1.3.6.1.4.1.21296.1.2.14.1.1.1.22 | ColumnethernetFecDegradedSerDeactivateThreshold | read-only | current | FEC-DEGRADED-SER alarm cleared if average SER, computed over accumulated FEC symbol errors in the monitoring period is below this threshold. UNITS:averageSER d… |
| 1.3.6.1.4.1.21296.1.2.14.1.1.1.23 | ColumnethernetFecDegradedSerMonitoringPeriod | read-only | current | Monitoring period duration over which FEC symbol errors are accumulated for asserting or clearing of FEC-DEGRADED-SER alarm. UNITS:seconds default value :10 |
| 1.3.6.1.4.1.21296.1.2.14.1.1.1.24 | ColumnethernetLldpAdminStatus | read-only | current | LLDP operational mode for this port. default value :disabled |
| 1.3.6.1.4.1.21296.1.2.14.1.1.1.25 | ColumnethernetLldpIngressMode | read-only | current | If lldp enabled, define what is the LLDP behavior for this direction. Conditions:../lldp-admin-status != 'disabled' default value :disabled |
| 1.3.6.1.4.1.21296.1.2.14.1.1.1.26 | ColumnethernetLldpEgressMode | read-only | current | If lldp enabled, define what is the LLDP behavior for this direction. Conditions:../lldp-admin-status != 'disabled' default value :disabled |
| 1.3.6.1.4.1.21296.1.2.14.1.1.1.27 | ColumnethernetMaxPacketLength | read-only | current | Maximum transfer unit for ethernet facility, in octets. UNITS:octets default value :1518 |
| 1.3.6.1.4.1.21296.1.2.14.1.1.1.28 | ColumnethernetTxMappingMode | read-only | current | The tx mapping mode of client port. The possible values are dependent on the HW and configuration. |
| 1.3.6.1.4.1.21296.1.2.14.1.1.1.29 | ColumnethernetExpectedMappingMode | read-only | current | The expected mapping mode of client port. The possible values are dependent on the HW and configuration. |
| 1.3.6.1.4.1.21296.1.2.14.1.1.1.30 | ColumnethernetTimeSlots | read-only | current | Time slots of the ethernet. |
| 1.3.6.1.4.1.21296.1.2.14.1.1.1.31 | ColumnethernetLinePort | read-only | current | Specify the line port for the client. Can only be configured when mapping mode is openZR+. |
| 1.3.6.1.4.1.21296.1.2.14.1.1.1.32 | ColumnethernetLoopbackMode | read-only | current | Indicates loopback action for facility or terminal. default value :loopback |
| 1.3.6.1.4.1.21296.1.2.14.1.1.1.33 | ColumnethernetTestSignalType | read-only | current | The type of test pattern that is injected. default value :none |
| 1.3.6.1.4.1.21296.1.2.14.1.1.1.34 | ColumnethernetTestSignalDirection | read-only | current | The direction of the test signal. default value :egress |
| 1.3.6.1.4.1.21296.1.2.14.1.1.1.35 | ColumnethernetTestSignalMonitoring | read-only | current | Monitor the incoming test signals for diagnostics. default value :false |
| 1.3.6.1.4.1.21296.1.2.14.1.1.1.36 | ColumnethernetCircuitId | read-only | current | System configured circuit ID, present in XCONs and associated facilities. For facilities, circuit-id is only filled in if an associated XCON exists. Format of … |
| 1.3.6.1.4.1.21296.1.2.14.1.1.1.37 | ColumnethernetTimingMode | read-only | current | The timing mode of the client. default value :transparent |
| 1.3.6.1.4.1.21296.1.2.14.1.1.1.38 | ColumnethernetTransmitInterPacketGap | read-only | current | The minimum transmit IPG(Inter-Packet Gap) value. default value :8 |
| 1.3.6.1.4.1.21296.1.2.14.1.1.1.39 | ColumnethernetGfpPayloadFcs | read-only | current | Enable/disable GFP payload FCS(Frame Check Sequence). default value :disabled |
| 1.3.6.1.4.1.21296.1.2.14.1.1.1.40 | ColumnethernetUpiValue | read-only | current | The value of UPI(User Payload Identifier) in GFP-F-extOPU2 mapping mode for 10GBE. default value :g709 |
| 1.3.6.1.4.1.21296.1.2.14.1.1.1.41 | ColumnethernetParent | read-only | current | For line ethernet, indicates the parent facility. |
| 1.3.6.1.4.1.21296.1.2.14.1.1.1.42 | ColumnethernetLldpTransmitInterval | read-only | current | The interval to transmit LLDP Tx TLVs. UNITS:seconds default value :30 |
| 1.3.6.1.4.1.21296.1.2.15 | NodetribPtp | |||
| 1.3.6.1.4.1.21296.1.2.15.1 | NodetribPtpInfo | |||
| 1.3.6.1.4.1.21296.1.2.15.1.1 | TabletribPtpTable | not-accessible | current | Basic TribPTP facility. |
| 1.3.6.1.4.1.21296.1.2.15.1.1.1 | RowtribPtpEntry | not-accessible | current | Entry of tribPtpTable |
| 1.3.6.1.4.1.21296.1.2.15.1.1.1.1 | ColumntribPtpName | read-only | current | A generic, configurable name for every facility. |
| 1.3.6.1.4.1.21296.1.2.15.1.1.1.2 | ColumntribPtpSupportingCard | read-only | current | Card that holds this facility |
| 1.3.6.1.4.1.21296.1.2.15.1.1.1.3 | ColumntribPtpSupportingPort | read-only | current | Ports that hold this facilityThis is originally a YANG leaf-list, here encoded as a comma separated list of values. |
| 1.3.6.1.4.1.21296.1.2.15.1.1.1.4 | ColumntribPtpSupportingFacilities | read-only | current | An XPath reference to the parent facilities.This is originally a YANG leaf-list, here encoded as a comma separated list of values. |
| 1.3.6.1.4.1.21296.1.2.15.1.1.1.5 | ColumntribPtpSupportedFacilities | read-only | current | An XPath reference to the children facilities.This is originally a YANG leaf-list, here encoded as a comma separated list of values. |
| 1.3.6.1.4.1.21296.1.2.15.1.1.1.6 | ColumntribPtpAID | read-only | current | Resource Access Identifier (AID). Identifies an instance within a specific resource type. |
| 1.3.6.1.4.1.21296.1.2.15.1.1.1.7 | ColumntribPtpLabel | read-only | current | The reply will be truncated in 128 bytes. User label. |
| 1.3.6.1.4.1.21296.1.2.15.1.1.1.8 | ColumntribPtpAdminState | read-only | current | The administrative state of the managed object. default value :unlock |
| 1.3.6.1.4.1.21296.1.2.15.1.1.1.9 | ColumntribPtpOperState | read-only | current | The operational state of this object. default value :disabled |
| 1.3.6.1.4.1.21296.1.2.15.1.1.1.10 | ColumntribPtpAvailState | read-only | current | Availability state of an entity. |
| 1.3.6.1.4.1.21296.1.2.15.1.1.1.11 | ColumntribPtpManagedBy | read-only | current | Describes whether this managed entity was system created or not. Only user created entities can be user deleted. default value :system |
| 1.3.6.1.4.1.21296.1.2.15.1.1.1.12 | ColumntribPtpAutoInServiceEnabled | read-only | current | Auto-in-service switch for this facility. default value :false |
| 1.3.6.1.4.1.21296.1.2.15.1.1.1.13 | ColumntribPtpValidSignalTime | read-only | current | Configurable time that represents a detection of a valid signal. Used for auto-in-service mechanism. UNITS:minutes default value :480 |
| 1.3.6.1.4.1.21296.1.2.15.1.1.1.14 | ColumntribPtpRemainingValidSignalTime | read-only | current | Actual remaining time for this facility to be automatically enabled by the auto-in-service mechanism. UNITS:minutes |
| 1.3.6.1.4.1.21296.1.2.15.1.1.1.15 | ColumntribPtpAlarmReportControl | read-only | current | Controls the reporting of alarms for this particular object. default value :allowed |
| 1.3.6.1.4.1.21296.1.2.15.1.1.1.16 | ColumntribPtpServiceType | read-only | current | The protocol type of the client that is being transported via the tributary optical transceiver module (TOM). default value :not-applicable |
| 1.3.6.1.4.1.21296.1.2.15.1.1.1.17 | ColumntribPtpTributaryDisableAction | read-only | current | Tributary Disable Action (TDA) indicates what action the NE performs towards the client equipment (connected over the TOM) when a line-side failure is observed… |
| 1.3.6.1.4.1.21296.1.2.15.1.1.1.18 | ColumntribPtpForwardDefectTrigger | read-only | current | Forward Defect TDA Trigger indicates on the egress, if NE receives a client forward defect (e.g., LF, ODU-AIS) whether to let it flow through towards the line … |
| 1.3.6.1.4.1.21296.1.2.15.1.1.1.19 | ColumntribPtpPowerThresholdLow | read-only | current | The default system threshold (known as 'Sensitivity') that triggers the OPR-OORL alarm (i.e., when the optical power received is below this value). Note that t… |
| 1.3.6.1.4.1.21296.1.2.15.1.1.1.20 | ColumntribPtpPowerThresholdLowOffset | read-only | current | A user configurable attribute that results in the 'effective lower threshold' based on which the system raises the OPR-OORL alarm. The effective threshold will… |
| 1.3.6.1.4.1.21296.1.2.15.1.1.1.21 | ColumntribPtpPowerThresholdHigh | read-only | current | The default system threshold (known as 'Overload') that triggers the OPR-OORH alarm (i.e., when the optical power received is greater than this value). Note th… |
| 1.3.6.1.4.1.21296.1.2.15.1.1.1.22 | ColumntribPtpPowerThresholdHighOffset | read-only | current | A user configurable attribute that results in the 'effective upper threshold' based on which the system raises the OPR-OORH alarm. The effective threshold will… |
| 1.3.6.1.4.1.21296.1.2.15.1.1.1.23 | ColumntribPtpTributaryDisableHoldoffTimer | read-only | current | The hold off time of client shutdown or replacement signal at egress direction. 0 means holdoff functionality disabled UNITS:milliseconds default value :0 |
| 1.3.6.1.4.1.21296.1.2.15.1.1.1.24 | ColumntribPtpNearEndTda | read-only | current | The switching of near end TDA. default value :disabled |
| 1.3.6.1.4.1.21296.1.2.15.1.1.1.25 | ColumntribPtpTdaDegradeMode | read-only | current | The switching of defect BERSD-ODU trig ALS default value :disabled |
| 1.3.6.1.4.1.21296.1.2.15.1.1.1.26 | ColumntribPtpCircuitId | read-only | current | System configured circuit ID, present in XCONs and associated facilities. For facilities, circuit-id is only filled in if an associated XCON exists. Format of … |
| 1.3.6.1.4.1.21296.1.2.15.1.1.1.27 | ColumntribPtpEgressPortList | read-only | current | A list of port AIDs that are bound to this trib-ptp for diverse-routing.This is originally a YANG leaf-list, here encoded as a comma separated list of values. |
| 1.3.6.1.4.1.21296.1.2.16 | NodecommChannel | |||
| 1.3.6.1.4.1.21296.1.2.16.1 | NodecommChannelInfo | |||
| 1.3.6.1.4.1.21296.1.2.16.1.1 | TablecommChannelTable | not-accessible | current | Communication Channel facility. |
| 1.3.6.1.4.1.21296.1.2.16.1.1.1 | RowcommChannelEntry | not-accessible | current | Entry of commChannelTable |
| 1.3.6.1.4.1.21296.1.2.16.1.1.1.1 | ColumncommChannelName | read-only | current | A generic, configurable name for every facility. |
| 1.3.6.1.4.1.21296.1.2.16.1.1.1.2 | ColumncommChannelSupportingCard | read-only | current | Card that holds this facility |
| 1.3.6.1.4.1.21296.1.2.16.1.1.1.3 | ColumncommChannelSupportingPort | read-only | current | Ports that hold this facilityThis is originally a YANG leaf-list, here encoded as a comma separated list of values. |
| 1.3.6.1.4.1.21296.1.2.16.1.1.1.4 | ColumncommChannelSupportingFacilities | read-only | current | An XPath reference to the parent facilities.This is originally a YANG leaf-list, here encoded as a comma separated list of values. |
| 1.3.6.1.4.1.21296.1.2.16.1.1.1.5 | ColumncommChannelSupportedFacilities | read-only | current | An XPath reference to the children facilities.This is originally a YANG leaf-list, here encoded as a comma separated list of values. |
| 1.3.6.1.4.1.21296.1.2.16.1.1.1.6 | ColumncommChannelAID | read-only | current | Resource Access Identifier (AID). Identifies an instance within a specific resource type. |
| 1.3.6.1.4.1.21296.1.2.16.1.1.1.7 | ColumncommChannelLabel | read-only | current | The reply will be truncated in 128 bytes. User label. |
| 1.3.6.1.4.1.21296.1.2.16.1.1.1.8 | ColumncommChannelAdminState | read-only | current | The administrative state of the managed object. default value :unlock |
| 1.3.6.1.4.1.21296.1.2.16.1.1.1.9 | ColumncommChannelOperState | read-only | current | The operational state of this object. default value :disabled |
| 1.3.6.1.4.1.21296.1.2.16.1.1.1.10 | ColumncommChannelAvailState | read-only | current | Availability state of an entity. |
| 1.3.6.1.4.1.21296.1.2.16.1.1.1.11 | ColumncommChannelManagedBy | read-only | current | Describes whether this managed entity was system created or not. Only user created entities can be user deleted. default value :system |
| 1.3.6.1.4.1.21296.1.2.16.1.1.1.12 | ColumncommChannelAlarmReportControl | read-only | current | Controls the reporting of alarms for this particular object. default value :allowed |
| 1.3.6.1.4.1.21296.1.2.16.1.1.1.13 | ColumncommChannelType | read-only | current | Indicates the type of control channel. |
| 1.3.6.1.4.1.21296.1.2.16.1.1.1.14 | ColumncommChannelBandwidth | read-only | current | Indicates the control channel's bandwidth/capacity. This is system determined based on the underlying facilities that support this control channel. UNITS:Mbps |
| 1.3.6.1.4.1.21296.1.2.16.1.1.1.15 | ColumncommChannelMtu | read-only | current | The maximum transmission unit size in octets for comm channel. UNITS:octets default value :1500 |
| 1.3.6.1.4.1.21296.1.2.16.1.1.1.16 | ColumncommChannelParent | read-only | current | Parent object of the comm-channel. Only of relevance when type is GCC0 or GCC1 or FCC1-UC or iGCC. |
| 1.3.6.1.4.1.21296.1.2.16.1.1.1.17 | ColumncommChannelFcsLength | read-only | current | Specifies whether the Frame Check Sequence(FCS) is a 16-bit or 32-bit value. UNITS:bits default value :16 |
| 1.3.6.1.4.1.21296.1.2.16.1.1.1.18 | ColumncommChannelMru | read-only | current | Specifies the MRU(Maximum-Receive-Unit) in the Information and Padding fields. UNITS:octets default value :1500 |
| 1.3.6.1.4.1.21296.1.2.16.1.1.1.19 | ColumncommChannelRestartTimer | read-only | current | Specifies the restart timer of the PPP protocol in seconds. UNITS:seconds default value :3 |
| 1.3.6.1.4.1.21296.1.2.16.1.1.1.20 | ColumncommChannelMaxFailure | read-only | current | Specifies the maximum failure value of the PPP protocol. Max-Failure indicates the number of Configure-Nak packets sent without sending a Configure-Ack before … |
| 1.3.6.1.4.1.21296.1.2.16.1.1.1.21 | ColumncommChannelPeerAddress | read-only | current | The IP address on the peer node. default value :0.0.0.0 |
| 1.3.6.1.4.1.21296.1.2.16.1.1.1.22 | ColumncommChannelMode | read-only | current | Indicates the mode of operation of control channel. default value :L3 |
| 1.3.6.1.4.1.21296.1.2.16.1.1.1.23 | ColumncommChannelOperationalBandwidth | read-only | current | Indicates the control channel's operational bandwidth/capacity. UNITS:Mbps |
| 1.3.6.1.4.1.21296.1.2.17 | Nodeservices | |||
| 1.3.6.1.4.1.21296.1.2.17.2 | Nodexcon | |||
| 1.3.6.1.4.1.21296.1.2.17.2.1 | TablexconTable | not-accessible | current | Layer 1 digital services that are currently provisioned in the system. This includes pre-provisoned XCONs too. |
| 1.3.6.1.4.1.21296.1.2.17.2.1.1 | RowxconEntry | not-accessible | current | Entry of xconTable |
| 1.3.6.1.4.1.21296.1.2.17.2.1.1.1 | ColumnxconName | read-only | current | A user configured name for the XCON. |
| 1.3.6.1.4.1.21296.1.2.17.2.1.1.2 | ColumnxconAID | read-only | current | Resource Access Identifier (AID). Identifies an instance within a specific resource type. |
| 1.3.6.1.4.1.21296.1.2.17.2.1.1.3 | ColumnxconOperState | read-only | current | The operational state of this object. default value :disabled |
| 1.3.6.1.4.1.21296.1.2.17.2.1.1.4 | ColumnxconAvailState | read-only | current | Availability state of an entity. |
| 1.3.6.1.4.1.21296.1.2.17.2.1.1.5 | ColumnxconSource | read-only | current | The source end-point between which the XCON needs to be created. |
| 1.3.6.1.4.1.21296.1.2.17.2.1.1.6 | ColumnxconDestination | read-only | current | The destination end-point between which the XCON needs to be created. |
| 1.3.6.1.4.1.21296.1.2.17.2.1.1.7 | ColumnxconPayloadType | read-only | current | Indicates a generic, high-level source (from) client payload type of the digital XCON. |
| 1.3.6.1.4.1.21296.1.2.17.2.1.1.8 | ColumnxconDirection | read-only | current | Indicates whether the digital XCON is uni-directional (1-WAY) or bi-directional (2-WAY). default value :two-way |
| 1.3.6.1.4.1.21296.1.2.17.2.1.1.9 | ColumnxconLabel | read-only | current | The reply will be truncated in 128 bytes. User label. |
| 1.3.6.1.4.1.21296.1.2.17.2.1.1.10 | ColumnxconCircuitIdSuffix | read-only | current | User configured circuit ID suffix. |
| 1.3.6.1.4.1.21296.1.2.17.2.1.1.13 | ColumnxconPayloadTreatment | read-only | current | Indicates a generic payload treatment value of the digital XCON. |
| 1.3.6.1.4.1.21296.1.2.17.2.1.1.14 | ColumnxconNetworkMapping | read-only | current | Indicates the server layer protocol type that supports this XCON. |
| 1.3.6.1.4.1.21296.1.2.17.2.1.1.15 | ColumnxconType | read-only | current | Type of XCON. |
| 1.3.6.1.4.1.21296.1.2.17.2.1.1.16 | ColumnxconProtectionType | read-only | current | Represents the protection type this XCON has. default value :unprotected |
| 1.3.6.1.4.1.21296.1.2.17.2.1.1.17 | ColumnxconCircuitId | read-only | current | System configured circuit ID, present in XCONs and associated facilities. For facilities, circuit-id is only filled in if an associated XCON exists. Format of … |
| 1.3.6.1.4.1.21296.1.2.17.2.1.1.21 | ColumnxconManagedBy | read-only | current | Describes whether this xcon was system created or not. Only user created xcon can be user deleted. default value :user |
| 1.3.6.1.4.1.21296.1.2.17.2.1.1.22 | ColumnxconFromAdaptation | read-only | current | Indicate server layer adaptation at client side. |
| 1.3.6.1.4.1.21296.1.2.17.2.1.1.23 | ColumnxconToAdaptation | read-only | current | Indicate server layer adaptation at line side. |
| 1.3.6.1.4.1.21296.1.2.17.2.1.1.24 | ColumnxconUsedResources | read-only | current | List of resources being used by this XCON besides the two main source/destination end-points.This is originally a YANG leaf-list, here encoded as a comma separ… |
| 1.3.6.1.4.1.21296.1.2.17.3 | Nodeoxcon | |||
| 1.3.6.1.4.1.21296.1.2.17.3.1 | TableoxconTable | not-accessible | current | List of Optical Cross Connections (OXcon). |
| 1.3.6.1.4.1.21296.1.2.17.3.1.1 | RowoxconEntry | not-accessible | current | Entry of oxconTable |
| 1.3.6.1.4.1.21296.1.2.17.3.1.1.1 | ColumnoxconName | read-only | current | A user configured name for the OXcon. |
| 1.3.6.1.4.1.21296.1.2.17.3.1.1.2 | ColumnoxconAID | read-only | current | Resource Access Identifier (AID). Identifies an instance within a specific resource type. |
| 1.3.6.1.4.1.21296.1.2.17.3.1.1.3 | ColumnoxconLabel | read-only | current | The reply will be truncated in 128 bytes. User label. |
| 1.3.6.1.4.1.21296.1.2.17.3.1.1.4 | ColumnoxconOperState | read-only | current | The operational state of this object. default value :disabled |
| 1.3.6.1.4.1.21296.1.2.17.3.1.1.5 | ColumnoxconAvailState | read-only | current | Availability state of an entity. |
| 1.3.6.1.4.1.21296.1.2.17.3.1.1.6 | ColumnoxconSource | read-only | current | The source end-point required for OXcon creation. |
| 1.3.6.1.4.1.21296.1.2.17.3.1.1.7 | ColumnoxconDestination | read-only | current | The destination end-point required for OXcon creation. |
| 1.3.6.1.4.1.21296.1.2.17.3.1.1.8 | ColumnoxconDirection | read-only | current | Set-by-create OXcon type. default value :two-way |
| 1.3.6.1.4.1.21296.1.2.17.3.1.1.9 | ColumnoxconTargetOutputPowerSrc | read-only | current | The source interface target power. Only of relevance for power working mode and two-way OXcon and if optical-ptp.target-power-setting = manual. default value :0 |
| 1.3.6.1.4.1.21296.1.2.17.3.1.1.10 | ColumnoxconTargetOutputPowerDst | read-only | current | The destination interface target power. Only of relevance when connecting regular NMC and if optical-ptp.target-power-setting = manual. default value :0 |
| 1.3.6.1.4.1.21296.1.2.17.3.1.1.11 | ColumnoxconTargetActualPowerDst | read-only | current | Value: as calculated by Power Control if target-power-setting = auto; otherwise it is the exact value configured at target-output-power-dst/ src. Only of relev… |
| 1.3.6.1.4.1.21296.1.2.17.3.1.1.12 | ColumnoxconTargetActualPowerSrc | read-only | current | Value: as calculated by Power Control if target-power-setting = auto; otherwise it is the exact value configured at target-output-power-dst/ src. Only of relev… |
| 1.3.6.1.4.1.21296.1.2.17.3.1.1.13 | ColumnoxconTargetActualPsdDst | read-only | current | Actual PSD destination. Only of relevance when connecting regular NMC. |
| 1.3.6.1.4.1.21296.1.2.17.3.1.1.14 | ColumnoxconTargetActualPsdSrc | read-only | current | Actual PSD source. Only of relevance when connecting regular NMC. |
| 1.3.6.1.4.1.21296.1.2.17.3.1.1.15 | ColumnoxconMonitored | read-only | current | Monitoring/ not-monitored indication; does not change during oxcon lifetime. default value :true |
| 1.3.6.1.4.1.21296.1.2.17.3.1.1.16 | ColumnoxconCircuitId | read-only | current | Path/ service name of optical cross-connection. |
| 1.3.6.1.4.1.21296.1.2.17.3.1.1.17 | ColumnoxconManagedBy | read-only | current | Describes whether this managed entity was system created or not. Only user created entities can be user deleted. default value :user |
| 1.3.6.1.4.1.21296.1.2.17.3.1.1.18 | ColumnoxconActivationMode | read-only | current | OXCON Activation Mode (it is set-by-create, cannot be changed). default value :automatic |
| 1.3.6.1.4.1.21296.1.2.17.3.1.1.19 | ColumnoxconActivationRequestFwd | read-only | current | This(rw) attribute controls the state of activation at A->Z direction. |
| 1.3.6.1.4.1.21296.1.2.17.3.1.1.20 | ColumnoxconActivationRequestBwd | read-only | current | This(rw) attribute controls the state of activation at Z->A direction. |
| 1.3.6.1.4.1.21296.1.2.17.3.1.1.21 | ColumnoxconActivationStateFwd | read-only | current | This(rw) attribute controls the state of activation at A->Z direction. |
| 1.3.6.1.4.1.21296.1.2.17.3.1.1.22 | ColumnoxconActivationStateBwd | read-only | current | This(rw) attribute controls the state of activation at Z->A direction. |
| 1.3.6.1.4.1.21296.1.2.17.3.1.1.23 | ColumnoxconAutoRecoveryState | read-only | current | Auto Recovery State. Conditions:/ne/l0-mode-op = 'slte' default value :not-applicable |
| 1.3.6.1.4.1.21296.1.2.17.3.1.1.24 | ColumnoxconAutoDelete | read-only | current | When enabled, the system may auto-delete this OXCON once activation intent and states are moved deactivated. When disabled, the OXCON stays until explicitly de… |
| 1.3.6.1.4.1.21296.1.2.18 | Nodesecurity | |||
| 1.3.6.1.4.1.21296.1.2.19 | Nodekeys | |||
| 1.3.6.1.4.1.21296.1.2.19.3 | NodeiSK | |||
| 1.3.6.1.4.1.21296.1.2.19.3.1 | TableiSKTable | not-accessible | current | Image Signing Key list. |
| 1.3.6.1.4.1.21296.1.2.19.3.1.1 | RowiSKEntry | not-accessible | current | Entry of iSKTable |
| 1.3.6.1.4.1.21296.1.2.19.3.1.1.1 | ColumniSKName | read-only | current | Unique representation of the object |
| 1.3.6.1.4.1.21296.1.2.19.3.1.1.2 | ColumniSKCPU | read-only | current | Identifier for member CPUs on cards starts at 0 |
| 1.3.6.1.4.1.21296.1.2.19.3.1.1.3 | ColumniSKKeyName | read-only | current | Name of the key |
| 1.3.6.1.4.1.21296.1.2.19.3.1.1.4 | ColumniSKKeySerialNumber | read-only | current | Key Serial Number |
| 1.3.6.1.4.1.21296.1.2.19.3.1.1.5 | ColumniSKIssuerName | read-only | current | Name of the CSA (Code Signing Appliance) |
| 1.3.6.1.4.1.21296.1.2.19.3.1.1.6 | ColumniSKKeyLength | read-only | current | Key length in bits UNITS:bits |
| 1.3.6.1.4.1.21296.1.2.19.3.1.1.7 | ColumniSKKeyPayload | read-only | current | Key Payload (hex format) |
| 1.3.6.1.4.1.21296.1.2.19.3.1.1.8 | ColumniSKIsKeyInUse | read-only | current | Indicates if the key is in use in this FRU default value :false |
| 1.3.6.1.4.1.21296.1.2.19.3.1.1.9 | ColumniSKIsKeyVerified | read-only | current | Indicates if the key is verified in this FRU default value :false |
| 1.3.6.1.4.1.21296.1.2.19.3.1.1.10 | ColumniSKBeingDeleted | read-only | current | System is in the process of deletion for this ISK. default value :false |
| 1.3.6.1.4.1.21296.1.2.19.3.1.1.11 | ColumniSKKRKName | read-only | current | Name of the KRK (Image root key) that signed this ISK |
| 1.3.6.1.4.1.21296.1.2.19.3.1.1.12 | ColumniSKSignatureHashScheme | read-only | current | Hashing Scheme |
| 1.3.6.1.4.1.21296.1.2.19.3.1.1.13 | ColumniSKSignatureAlgorithm | read-only | current | Signature Algorithm |
| 1.3.6.1.4.1.21296.1.2.19.3.1.1.14 | ColumniSKSignaturePayload | read-only | current | Signature Payload |
| 1.3.6.1.4.1.21296.1.2.19.3.1.1.15 | ColumniSKSignatureGenTime | read-only | current | Signature Generation Time |
| 1.3.6.1.4.1.21296.1.2.19.5 | NodekRK | |||
| 1.3.6.1.4.1.21296.1.2.19.5.1 | TablekRKTable | not-accessible | current | Image Root Key list. |
| 1.3.6.1.4.1.21296.1.2.19.5.1.1 | RowkRKEntry | not-accessible | current | Entry of kRKTable |
| 1.3.6.1.4.1.21296.1.2.19.5.1.1.1 | ColumnkRKName | read-only | current | Unique representation of the object |
| 1.3.6.1.4.1.21296.1.2.19.5.1.1.2 | ColumnkRKCPU | read-only | current | Identifier for member CPUs on cards starts at 0 |
| 1.3.6.1.4.1.21296.1.2.19.5.1.1.3 | ColumnkRKKeyName | read-only | current | Name of the key |
| 1.3.6.1.4.1.21296.1.2.19.5.1.1.4 | ColumnkRKKeySerialNumber | read-only | current | Key Serial Number |
| 1.3.6.1.4.1.21296.1.2.19.5.1.1.5 | ColumnkRKIssuerName | read-only | current | Name of the CSA (Code Signing Appliance) |
| 1.3.6.1.4.1.21296.1.2.19.5.1.1.6 | ColumnkRKKeyLength | read-only | current | Key length in bits UNITS:bits |
| 1.3.6.1.4.1.21296.1.2.19.5.1.1.7 | ColumnkRKKeyPayload | read-only | current | Key Payload (hex format) |
| 1.3.6.1.4.1.21296.1.2.19.6 | NodekeyReplacementPackage | |||
| 1.3.6.1.4.1.21296.1.2.19.6.1 | ScalarkeyReplacementPackageKRPName | read-only | current | KRP name |
| 1.3.6.1.4.1.21296.1.2.19.6.2 | ScalarkeyReplacementPackageKRPVersion | read-only | current | Package version |
| 1.3.6.1.4.1.21296.1.2.19.6.3 | ScalarkeyReplacementPackageKeyName | read-only | current | Name of the key |
| 1.3.6.1.4.1.21296.1.2.19.6.4 | ScalarkeyReplacementPackageKeySerialNumber | read-only | current | Key Serial Number |
| 1.3.6.1.4.1.21296.1.2.19.6.5 | ScalarkeyReplacementPackageIssuerName | read-only | current | Name of the CSA (Code Signing Appliance) |
| 1.3.6.1.4.1.21296.1.2.19.6.6 | ScalarkeyReplacementPackageKeyLength | read-only | current | Key length in bits UNITS:bits |
| 1.3.6.1.4.1.21296.1.2.19.6.7 | ScalarkeyReplacementPackageKeyPayload | read-only | current | Key Payload (hex format) |
| 1.3.6.1.4.1.21296.1.2.19.6.8 | ScalarkeyReplacementPackageKRKName | read-only | current | Name of the KRK (Image root key) that signed this ISK |
| 1.3.6.1.4.1.21296.1.2.19.6.9 | ScalarkeyReplacementPackageSignatureHashScheme | read-only | current | Hashing Scheme |
| 1.3.6.1.4.1.21296.1.2.19.6.10 | ScalarkeyReplacementPackageSignatureAlgorithm | read-only | current | Signature Algorithm |
| 1.3.6.1.4.1.21296.1.2.19.6.11 | ScalarkeyReplacementPackageSignaturePayload | read-only | current | Signature Payload |
| 1.3.6.1.4.1.21296.1.2.19.6.12 | ScalarkeyReplacementPackageSignatureGenTime | read-only | current | Signature Generation Time |
| 1.3.6.1.4.1.21296.1.2.19.6.13 | ScalarkeyReplacementPackageInstallStatus | read-only | current | Indicates if this KRP has been installed in the system |
| 1.3.6.1.4.1.21296.1.2.20 | Nodecertificate | |||
| 1.3.6.1.4.1.21296.1.2.20.2 | NodetrustedCertificate | |||
| 1.3.6.1.4.1.21296.1.2.20.2.1 | TabletrustedCertificateTable | not-accessible | current | X509v3 CA(Root and Intermediate) certificate that the system trusts. |
| 1.3.6.1.4.1.21296.1.2.20.2.1.1 | RowtrustedCertificateEntry | not-accessible | current | Entry of trustedCertificateTable |
| 1.3.6.1.4.1.21296.1.2.20.2.1.1.1 | ColumntrustedCertificateId | read-only | current | A unique object identifier for the certificate. |
| 1.3.6.1.4.1.21296.1.2.20.2.1.1.2 | ColumntrustedCertificateVersion | read-only | current | X509 certificate version. default value :v3 |
| 1.3.6.1.4.1.21296.1.2.20.2.1.1.3 | ColumntrustedCertificateSerialNumber | read-only | current | Ascii hexadecimal string representing a positive (long) integer assigned by the CA. It must be unique for each certificate issued by a given CA (i.e., the issu… |
| 1.3.6.1.4.1.21296.1.2.20.2.1.1.4 | ColumntrustedCertificateSubjectName | read-only | current | The subject field identifies the entity associated with the public key stored in the subject public key field. |
| 1.3.6.1.4.1.21296.1.2.20.2.1.1.5 | ColumntrustedCertificateIssuer | read-only | current | The issuer name identifies the entity that has signed and issued the certificate. Issuers (such as a CA or an RA) also issue CRLs. |
| 1.3.6.1.4.1.21296.1.2.20.2.1.1.6 | ColumntrustedCertificateValidFrom | read-only | current | The date from which the certificate is valid. |
| 1.3.6.1.4.1.21296.1.2.20.2.1.1.7 | ColumntrustedCertificateValidTo | read-only | current | The date after which the certificate is deemed to have expired. |
| 1.3.6.1.4.1.21296.1.2.20.2.1.1.8 | ColumntrustedCertificateStatus | read-only | current | The current status of the X509v3 certificate. |
| 1.3.6.1.4.1.21296.1.2.20.2.1.1.9 | ColumntrustedCertificatePublicKeyLength | read-only | current | X509v3 certificate public key algorithm and supported key length. |
| 1.3.6.1.4.1.21296.1.2.20.2.1.1.10 | ColumntrustedCertificatePublicKeyType | read-only | current | Public/private key type for X509v3 certificate. |
| 1.3.6.1.4.1.21296.1.2.20.2.1.1.11 | ColumntrustedCertificateSignatureKeyType | read-only | current | Signature algorithm key type for certificate/CRL. |
| 1.3.6.1.4.1.21296.1.2.20.2.1.1.12 | ColumntrustedCertificateSignatureHashAlgorithm | read-only | current | Hash algorithm used for signing certificate/CRL. |
| 1.3.6.1.4.1.21296.1.2.20.2.1.1.13 | ColumntrustedCertificateCertificateBytes | read-only | current | The reply will be truncated in 128 bytes. A custom type that encodes the entire X.509v3 certificate as string in PEM(base64 encoding) format: ...base64 encoded… |
| 1.3.6.1.4.1.21296.1.2.20.2.1.1.14 | ColumntrustedCertificateAlarmReportControl | read-only | current | Controls the reporting of alarms for this particular object. default value :allowed |
| 1.3.6.1.4.1.21296.1.2.20.2.1.1.15 | ColumntrustedCertificateLabel | read-only | current | The reply will be truncated in 128 bytes. User label. |
| 1.3.6.1.4.1.21296.1.2.20.2.1.1.16 | ColumntrustedCertificateTrustChain | read-only | current | List of trusted certificates that constitute this certificate's trust chain.This is originally a YANG leaf-list, here encoded as a comma separated list of valu… |
| 1.3.6.1.4.1.21296.1.2.20.2.1.1.17 | ColumntrustedCertificateModificationTime | read-only | current | Timestamp of certificate installation/rotation. The timestamp '1970-01-01T00:00:00Z' means the modification time is unknown. |
| 1.3.6.1.4.1.21296.1.2.20.2.1.1.18 | ColumntrustedCertificateKeyUsage | read-only | current | Certificate's key usage purposes.This is originally a YANG leaf-list, here encoded as a comma separated list of values. |
| 1.3.6.1.4.1.21296.1.2.20.2.1.1.19 | ColumntrustedCertificateExtendedKeyUsage | read-only | current | Certificate's extended key usage purposes.This is originally a YANG leaf-list, here encoded as a comma separated list of values. |
| 1.3.6.1.4.1.21296.1.2.20.2.1.1.20 | ColumntrustedCertificateRevocationMode | read-only | current | Controls how the revocation status of the certificate is determined. default value :auto |
| 1.3.6.1.4.1.21296.1.2.20.2.1.1.21 | ColumntrustedCertificateUsedBy | read-only | current | List of foreign keys representing secure-applications, ikev2-peers, etc., presently using the certificate.This is originally a YANG leaf-list, here encoded as … |
| 1.3.6.1.4.1.21296.1.2.20.2.1.1.22 | ColumntrustedCertificateAssociatedCa | read-only | current | The CA associated with the certificate. |
| 1.3.6.1.4.1.21296.1.2.20.3 | NodelocalCertificate | |||
| 1.3.6.1.4.1.21296.1.2.20.3.1 | TablelocalCertificateTable | not-accessible | current | X509v3 end-entity certificate that represents a one of various secure application identities. |
| 1.3.6.1.4.1.21296.1.2.20.3.1.1 | RowlocalCertificateEntry | not-accessible | current | Entry of localCertificateTable |
| 1.3.6.1.4.1.21296.1.2.20.3.1.1.1 | ColumnlocalCertificateId | read-only | current | A unique object identifier for the certificate. |
| 1.3.6.1.4.1.21296.1.2.20.3.1.1.2 | ColumnlocalCertificateVersion | read-only | current | X509 certificate version. default value :v3 |
| 1.3.6.1.4.1.21296.1.2.20.3.1.1.3 | ColumnlocalCertificateSerialNumber | read-only | current | Ascii hexadecimal string representing a positive (long) integer assigned by the CA. It must be unique for each certificate issued by a given CA (i.e., the issu… |
| 1.3.6.1.4.1.21296.1.2.20.3.1.1.4 | ColumnlocalCertificateSubjectName | read-only | current | The subject field identifies the entity associated with the public key stored in the subject public key field. |
| 1.3.6.1.4.1.21296.1.2.20.3.1.1.5 | ColumnlocalCertificateIssuer | read-only | current | The issuer name identifies the entity that has signed and issued the certificate. Issuers (such as a CA or an RA) also issue CRLs. |
| 1.3.6.1.4.1.21296.1.2.20.3.1.1.6 | ColumnlocalCertificateValidFrom | read-only | current | The date from which the certificate is valid. |
| 1.3.6.1.4.1.21296.1.2.20.3.1.1.7 | ColumnlocalCertificateValidTo | read-only | current | The date after which the certificate is deemed to have expired. |
| 1.3.6.1.4.1.21296.1.2.20.3.1.1.8 | ColumnlocalCertificateStatus | read-only | current | The current status of the X509v3 certificate. |
| 1.3.6.1.4.1.21296.1.2.20.3.1.1.9 | ColumnlocalCertificatePublicKeyLength | read-only | current | X509v3 certificate public key algorithm and supported key length. |
| 1.3.6.1.4.1.21296.1.2.20.3.1.1.10 | ColumnlocalCertificatePublicKeyType | read-only | current | Public/private key type for X509v3 certificate. |
| 1.3.6.1.4.1.21296.1.2.20.3.1.1.11 | ColumnlocalCertificateSignatureKeyType | read-only | current | Signature algorithm key type for certificate/CRL. |
| 1.3.6.1.4.1.21296.1.2.20.3.1.1.12 | ColumnlocalCertificateSignatureHashAlgorithm | read-only | current | Hash algorithm used for signing certificate/CRL. |
| 1.3.6.1.4.1.21296.1.2.20.3.1.1.13 | ColumnlocalCertificateCertificateBytes | read-only | current | The reply will be truncated in 128 bytes. A custom type that encodes the entire X.509v3 certificate as string in PEM(base64 encoding) format: ...base64 encoded… |
| 1.3.6.1.4.1.21296.1.2.20.3.1.1.14 | ColumnlocalCertificateSubjectAlternativeNames | read-only | current | The reply will be truncated in 128 bytes. Contains a list of subject alternative name (X509v3 extension SAN) entries separated by <SPACE><PIPE><SPACE> delimite… |
| 1.3.6.1.4.1.21296.1.2.20.3.1.1.15 | ColumnlocalCertificateSelfSigned | read-only | current | True if certificate is self-signed (does not have a trust chain) default value :false |
| 1.3.6.1.4.1.21296.1.2.20.3.1.1.16 | ColumnlocalCertificateAlarmReportControl | read-only | current | Controls the reporting of alarms for this particular object. default value :allowed |
| 1.3.6.1.4.1.21296.1.2.20.3.1.1.17 | ColumnlocalCertificateLabel | read-only | current | The reply will be truncated in 128 bytes. User label. |
| 1.3.6.1.4.1.21296.1.2.20.3.1.1.18 | ColumnlocalCertificateTrustChain | read-only | current | List of trusted certificates that constitute this certificate's trust chain.This is originally a YANG leaf-list, here encoded as a comma separated list of valu… |
| 1.3.6.1.4.1.21296.1.2.20.3.1.1.19 | ColumnlocalCertificateModificationTime | read-only | current | Timestamp of certificate installation/rotation. The timestamp '1970-01-01T00:00:00Z' means the modification time is unknown. |
| 1.3.6.1.4.1.21296.1.2.20.3.1.1.20 | ColumnlocalCertificateKeyUsage | read-only | current | Certificate's key usage purposes.This is originally a YANG leaf-list, here encoded as a comma separated list of values. |
| 1.3.6.1.4.1.21296.1.2.20.3.1.1.21 | ColumnlocalCertificateExtendedKeyUsage | read-only | current | Certificate's extended key usage purposes.This is originally a YANG leaf-list, here encoded as a comma separated list of values. |
| 1.3.6.1.4.1.21296.1.2.20.3.1.1.22 | ColumnlocalCertificateRevocationMode | read-only | current | Controls how the revocation status of the certificate is determined. default value :auto |
| 1.3.6.1.4.1.21296.1.2.20.3.1.1.23 | ColumnlocalCertificateUsedBy | read-only | current | List of foreign keys representing secure-applications, ikev2-peers, etc., presently using the certificate.This is originally a YANG leaf-list, here encoded as … |
| 1.3.6.1.4.1.21296.1.2.20.3.1.1.24 | ColumnlocalCertificateAssociatedCa | read-only | current | The CA associated with the certificate. |
| 1.3.6.1.4.1.21296.1.2.20.4 | NodepeerCertificate | |||
| 1.3.6.1.4.1.21296.1.2.20.4.1 | TablepeerCertificateTable | not-accessible | current | X509v3 end-entity certificate that represents a trusted 'remote peer' certificate for L1 encryption secure application. |
| 1.3.6.1.4.1.21296.1.2.20.4.1.1 | RowpeerCertificateEntry | not-accessible | current | Entry of peerCertificateTable |
| 1.3.6.1.4.1.21296.1.2.20.4.1.1.1 | ColumnpeerCertificateId | read-only | current | A unique object identifier for the certificate. |
| 1.3.6.1.4.1.21296.1.2.20.4.1.1.2 | ColumnpeerCertificateVersion | read-only | current | X509 certificate version. default value :v3 |
| 1.3.6.1.4.1.21296.1.2.20.4.1.1.3 | ColumnpeerCertificateSerialNumber | read-only | current | Ascii hexadecimal string representing a positive (long) integer assigned by the CA. It must be unique for each certificate issued by a given CA (i.e., the issu… |
| 1.3.6.1.4.1.21296.1.2.20.4.1.1.4 | ColumnpeerCertificateSubjectName | read-only | current | The subject field identifies the entity associated with the public key stored in the subject public key field. |
| 1.3.6.1.4.1.21296.1.2.20.4.1.1.5 | ColumnpeerCertificateIssuer | read-only | current | The issuer name identifies the entity that has signed and issued the certificate. Issuers (such as a CA or an RA) also issue CRLs. |
| 1.3.6.1.4.1.21296.1.2.20.4.1.1.6 | ColumnpeerCertificateValidFrom | read-only | current | The date from which the certificate is valid. |
| 1.3.6.1.4.1.21296.1.2.20.4.1.1.7 | ColumnpeerCertificateValidTo | read-only | current | The date after which the certificate is deemed to have expired. |
| 1.3.6.1.4.1.21296.1.2.20.4.1.1.8 | ColumnpeerCertificateStatus | read-only | current | The current status of the X509v3 certificate. |
| 1.3.6.1.4.1.21296.1.2.20.4.1.1.9 | ColumnpeerCertificatePublicKeyLength | read-only | current | X509v3 certificate public key algorithm and supported key length. |
| 1.3.6.1.4.1.21296.1.2.20.4.1.1.10 | ColumnpeerCertificatePublicKeyType | read-only | current | Public/private key type for X509v3 certificate. |
| 1.3.6.1.4.1.21296.1.2.20.4.1.1.11 | ColumnpeerCertificateSignatureKeyType | read-only | current | Signature algorithm key type for certificate/CRL. |
| 1.3.6.1.4.1.21296.1.2.20.4.1.1.12 | ColumnpeerCertificateSignatureHashAlgorithm | read-only | current | Hash algorithm used for signing certificate/CRL. |
| 1.3.6.1.4.1.21296.1.2.20.4.1.1.13 | ColumnpeerCertificateCertificateBytes | read-only | current | The reply will be truncated in 128 bytes. A custom type that encodes the entire X.509v3 certificate as string in PEM(base64 encoding) format: ...base64 encoded… |
| 1.3.6.1.4.1.21296.1.2.20.4.1.1.14 | ColumnpeerCertificateSubjectAlternativeNames | read-only | current | The reply will be truncated in 128 bytes. Contains a list of subject alternative name (X509v3 extension SAN) entries separated by <SPACE><PIPE><SPACE> delimite… |
| 1.3.6.1.4.1.21296.1.2.20.4.1.1.16 | ColumnpeerCertificateAlarmReportControl | read-only | current | Controls the reporting of alarms for this particular object. default value :allowed |
| 1.3.6.1.4.1.21296.1.2.20.4.1.1.17 | ColumnpeerCertificateLabel | read-only | current | The reply will be truncated in 128 bytes. User label. |
| 1.3.6.1.4.1.21296.1.2.20.4.1.1.18 | ColumnpeerCertificateTrustChain | read-only | current | List of trusted certificates that constitute this certificate's trust chain.This is originally a YANG leaf-list, here encoded as a comma separated list of valu… |
| 1.3.6.1.4.1.21296.1.2.20.4.1.1.19 | ColumnpeerCertificateModificationTime | read-only | current | Timestamp of certificate installation/rotation. The timestamp '1970-01-01T00:00:00Z' means the modification time is unknown. |
| 1.3.6.1.4.1.21296.1.2.20.4.1.1.20 | ColumnpeerCertificateKeyUsage | read-only | current | Certificate's key usage purposes.This is originally a YANG leaf-list, here encoded as a comma separated list of values. |
| 1.3.6.1.4.1.21296.1.2.20.4.1.1.21 | ColumnpeerCertificateExtendedKeyUsage | read-only | current | Certificate's extended key usage purposes.This is originally a YANG leaf-list, here encoded as a comma separated list of values. |
| 1.3.6.1.4.1.21296.1.2.20.4.1.1.22 | ColumnpeerCertificateRevocationMode | read-only | current | Controls how the revocation status of the certificate is determined. default value :auto |
| 1.3.6.1.4.1.21296.1.2.20.4.1.1.23 | ColumnpeerCertificateUsedBy | read-only | current | List of foreign keys representing secure-applications, ikev2-peers, etc., presently using the certificate.This is originally a YANG leaf-list, here encoded as … |
| 1.3.6.1.4.1.21296.1.2.20.4.1.1.24 | ColumnpeerCertificateAssociatedCa | read-only | current | The CA associated with the certificate. |
| 1.3.6.1.4.1.21296.1.2.20.6 | NodesecureApplication | |||
| 1.3.6.1.4.1.21296.1.2.20.6.1 | TablesecureApplicationTable | not-accessible | current | A secured application represents which uses X509v3 certificate as its digital identity |
| 1.3.6.1.4.1.21296.1.2.20.6.1.1 | RowsecureApplicationEntry | not-accessible | current | Entry of secureApplicationTable |
| 1.3.6.1.4.1.21296.1.2.20.6.1.1.1 | ColumnsecureApplicationId | read-only | current | A unique object identifier for the secure application. |
| 1.3.6.1.4.1.21296.1.2.20.6.1.1.2 | ColumnsecureApplicationActiveCertificateId | read-only | current | List of assigned certificates for this secure application.This is originally a YANG leaf-list, here encoded as a comma separated list of values. |
| 1.3.6.1.4.1.21296.1.2.20.6.1.1.3 | ColumnsecureApplicationType | read-only | current | Specifies whether secure application acts as a server or client. default value :server |
| 1.3.6.1.4.1.21296.1.2.20.6.1.1.4 | ColumnsecureApplicationInUse | read-only | current | Active certificate for this secure application. |
| 1.3.6.1.4.1.21296.1.2.20.6.1.1.5 | ColumnsecureApplicationStatus | read-only | current | Indicates whether this secure application is enabled or disabled. |
| 1.3.6.1.4.1.21296.1.2.20.6.1.1.6 | ColumnsecureApplicationVerifyClientCert | read-only | current | Controls client certificate verification behavior at TLS handshake. For TLS Mutual Authentication, this should be set to 'required'. Note that changes to this … |
| 1.3.6.1.4.1.21296.1.2.20.9 | Nodecrl | |||
| 1.3.6.1.4.1.21296.1.2.20.9.1 | TablecrlTable | not-accessible | current | A Certificate Revocation List (CRL) used to check if a certificate has been revoked by its issuer. |
| 1.3.6.1.4.1.21296.1.2.20.9.1.1 | RowcrlEntry | not-accessible | current | Entry of crlTable |
| 1.3.6.1.4.1.21296.1.2.20.9.1.1.1 | ColumncrlName | read-only | current | A unique object identifier for the CRL. The format is <issuer-common-name>-<n> where 'n' is an incrementing integer to differentiate multiple CRLs from the sam… |
| 1.3.6.1.4.1.21296.1.2.20.9.1.1.2 | ColumncrlIssuer | read-only | current | The issuer name identifies the entity that has signed and issued the CRL. |
| 1.3.6.1.4.1.21296.1.2.20.9.1.1.3 | ColumncrlNumber | read-only | current | Monotonically increasing sequence number for a given CRL scope and CRL issuer. |
| 1.3.6.1.4.1.21296.1.2.20.9.1.1.4 | ColumncrlIssuingDistributionPointUri | read-only | current | Identifies the issuer's distribution point name URI(s) for the CRL. Only HTTP URIs are supported. This may be an empty list.This is originally a YANG leaf-list… |
| 1.3.6.1.4.1.21296.1.2.20.9.1.1.5 | ColumncrlEffectiveDate | read-only | current | The issue date of the CRL. |
| 1.3.6.1.4.1.21296.1.2.20.9.1.1.6 | ColumncrlNextUpdate | read-only | current | The date by which the next CRL will be issued. |
| 1.3.6.1.4.1.21296.1.2.20.9.1.1.7 | ColumncrlSignatureKeyType | read-only | current | Signature algorithm key type for certificate/CRL. |
| 1.3.6.1.4.1.21296.1.2.20.9.1.1.8 | ColumncrlSignatureHashAlgorithm | read-only | current | Hash algorithm used for signing certificate/CRL. |
| 1.3.6.1.4.1.21296.1.2.20.9.1.1.9 | ColumncrlType | read-only | current | Specifies whether CRL was manually installed or automatically cached from a CDP. |
| 1.3.6.1.4.1.21296.1.2.20.9.1.1.10 | ColumncrlStatus | read-only | current | The current status of the CRL. |
| 1.3.6.1.4.1.21296.1.2.20.9.1.1.11 | ColumncrlLastUsedTime | read-only | current | Timestamp of last usage of this CRL for revocation checking. |
| 1.3.6.1.4.1.21296.1.2.20.9.1.1.12 | ColumncrlAssociatedCdp | read-only | current | The configured CDP which downloaded this CRL, if applicable. |
| 1.3.6.1.4.1.21296.1.2.20.9.1.1.13 | ColumncrlDownloadedFromUri | read-only | current | The reply will be truncated in 128 bytes. The HTTP URI from which this CRL was auto-downloaded. Not applicable to manually downloaded CRLs. Only of relevance w… |
| 1.3.6.1.4.1.21296.1.2.20.11 | Nodecdp | |||
| 1.3.6.1.4.1.21296.1.2.20.11.1 | TablecdpTable | not-accessible | current | A CRL Distribution Point (CDP) for automatic download and periodic refresh of a specified CRL. |
| 1.3.6.1.4.1.21296.1.2.20.11.1.1 | RowcdpEntry | not-accessible | current | Entry of cdpTable |
| 1.3.6.1.4.1.21296.1.2.20.11.1.1.1 | ColumncdpName | read-only | current | A unique object identifier for the CDP. |
| 1.3.6.1.4.1.21296.1.2.20.11.1.1.2 | ColumncdpUrl | read-only | current | The reply will be truncated in 128 bytes. HTTP URL of CRL. The CRL will be fetched from this location. The format is 'http://<host>[:<port>]/<path_to_crl_file>… |
| 1.3.6.1.4.1.21296.1.2.20.11.1.1.3 | ColumncdpEnabled | read-only | current | Enables automatic download and periodic refresh of the CRL. Enabling will immediately trigger a CRL auto-download. When disabled, no CRL refresh/updates will b… |
| 1.3.6.1.4.1.21296.1.2.20.11.1.1.4 | ColumncdpRefreshInterval | read-only | current | Defines when CRL should be refreshed/updated. If 'use-next-update' is specified, the next refresh time is defined by the current CRL next-update field. Refresh… |
| 1.3.6.1.4.1.21296.1.2.20.11.1.1.5 | ColumncdpNextUpdateTime | read-only | current | Timestamp of next CRL update. |
| 1.3.6.1.4.1.21296.1.2.20.11.1.1.6 | ColumncdpLastUpdateTime | read-only | current | Timestamp of most recent CRL update. |
| 1.3.6.1.4.1.21296.1.2.20.11.1.1.7 | ColumncdpLastUpdateResult | read-only | current | The reply will be truncated in 128 bytes. Result of the most recent CRL update. |
| 1.3.6.1.4.1.21296.1.2.20.13 | NodeocspServer | |||
| 1.3.6.1.4.1.21296.1.2.20.13.1 | TableocspServerTable | not-accessible | current | A manually-configured Online Certificate Status Protocol (OCSP) responder for certificate revocation status checking. |
| 1.3.6.1.4.1.21296.1.2.20.13.1.1 | RowocspServerEntry | not-accessible | current | Entry of ocspServerTable |
| 1.3.6.1.4.1.21296.1.2.20.13.1.1.1 | ColumnocspServerName | read-only | current | A unique object identifier for the OCSP responder. |
| 1.3.6.1.4.1.21296.1.2.20.13.1.1.2 | ColumnocspServerUrl | read-only | current | The reply will be truncated in 128 bytes. HTTP URL of OCSP responder. The format is 'http://<host>[:<port>]' where - '<host>' may be IPv4/v6 address, or DNS na… |
| 1.3.6.1.4.1.21296.1.2.20.13.1.1.3 | ColumnocspServerEnabled | read-only | current | Controls whether this OCSP responder can be consulted for certificate revocation status. default value :false |
| 1.3.6.1.4.1.21296.1.2.20.13.1.1.4 | ColumnocspServerPriority | read-only | current | This is used to sort the OCSP responders in order of precedence. Lower numbered OCSP responders are consulted before higher numbered ones. |
| 1.3.6.1.4.1.21296.1.2.20.13.1.1.5 | ColumnocspServerLastQuery | read-only | current | Timestamp of last successful query. |
| 1.3.6.1.4.1.21296.1.2.20.14 | NodecertToName | |||
| 1.3.6.1.4.1.21296.1.2.20.14.1 | TablecertToNameTable | not-accessible | current | A prioritized list of rules to create a correspondence between an X.509 client certificate and a user identity. Each rule maps or extracts a username from the … |
| 1.3.6.1.4.1.21296.1.2.20.14.1.1 | RowcertToNameEntry | not-accessible | current | Entry of certToNameTable |
| 1.3.6.1.4.1.21296.1.2.20.14.1.1.1 | ColumncertToNameId | read-only | current | A unique identifier for this entry. |
| 1.3.6.1.4.1.21296.1.2.20.14.1.1.2 | ColumncertToNamePriority | read-only | current | The priority with which this rule should be considered. A lower number indicates a higher priority. If omitted, the value is automatically set to one more than… |
| 1.3.6.1.4.1.21296.1.2.20.14.1.1.3 | ColumncertToNameMapType | read-only | current | Whether to directly map the certificate to a specified username or extract the username from a selected certificate field. |
| 1.3.6.1.4.1.21296.1.2.20.14.1.1.4 | ColumncertToNameField | read-only | current | The field of the certificate to extract the username from. |
| 1.3.6.1.4.1.21296.1.2.20.14.1.1.5 | ColumncertToNameMappedUserName | read-only | current | The username that corresponds to the X.509 client certificate. It can be a local or a remote user. Applicable only when map-type is 'map'. |
| 1.3.6.1.4.1.21296.1.2.20.14.1.1.6 | ColumncertToNameCriteria | read-only | current | The reply will be truncated in 128 bytes. Set of criteria that must all be met for the rule to apply. The criteria parameter provides details on fields of the … |
| 1.3.6.1.4.1.21296.1.2.20.14.1.1.7 | ColumncertToNameIssuer | read-only | current | Additional restriction that filters certificates generated by a specific issuer. Must be the name of an installed trusted certificate. If specified, the rule w… |
| 1.3.6.1.4.1.21296.1.2.20.14.1.1.8 | ColumncertToNameEnabled | read-only | current | Whether this cert-to-name rule is enabled or not. default value :true |
| 1.3.6.1.4.1.21296.1.2.20.14.1.1.9 | ColumncertToNameLabel | read-only | current | The reply will be truncated in 128 bytes. User label. |
| 1.3.6.1.4.1.21296.1.2.21 | Nodesyslog | |||
| 1.3.6.1.4.1.21296.1.2.21.1 | NodesyslogInfo | |||
| 1.3.6.1.4.1.21296.1.2.21.1.1 | ScalarsyslogRemoteLoggingSwitch | read-only | current | If false, disable all remote logging destinations. default value :true |
| 1.3.6.1.4.1.21296.1.2.21.1.2 | ScalarsyslogSourceAddress | read-only | current | Source address or hostname to be inserted in HOST field of log message. default value :localhost |
| 1.3.6.1.4.1.21296.1.2.21.1.3 | ScalarsyslogLogFileMessageCoalescence | read-only | current | If true, prevent flooding of identical messages during abnormal conditions. If there are multiple identical log messages for log files, there will be one messa… |
| 1.3.6.1.4.1.21296.1.2.21.1.4 | ScalarsyslogAlarmReportControl | read-only | current | Controls the reporting of alarms for this particular object. default value :allowed |
| 1.3.6.1.4.1.21296.1.2.21.1.5 | ScalarsyslogLabel | read-only | current | The reply will be truncated in 128 bytes. User label. |
| 1.3.6.1.4.1.21296.1.2.21.1.6 | ScalarsyslogLogRelay | read-only | current | If false, disable all remote logging from shelf controller to node controller. default value :false |
| 1.3.6.1.4.1.21296.1.2.21.1.7 | ScalarsyslogNiapCompliantLogging | read-only | current | Whether the logs are NIAP compliant. default value :false |
| 1.3.6.1.4.1.21296.1.2.21.1.8 | ScalarsyslogAssignmentMethod | read-only | current | The system would contain manual and dhcp configured values. System can use those onfigurations/values defined by assignment-method attributes. default value :b… |
| 1.3.6.1.4.1.21296.1.2.21.1.9 | ScalarsyslogPrivacyMode | read-only | current | If true, the system becomes GDPR compliant, by obfuscating the user private data in the logs default value :false |
| 1.3.6.1.4.1.21296.1.2.21.2 | NodelogServer | |||
| 1.3.6.1.4.1.21296.1.2.21.2.1 | TablelogServerTable | not-accessible | current | Grouping the configuration parameters for log forwarding. |
| 1.3.6.1.4.1.21296.1.2.21.2.1.1 | RowlogServerEntry | not-accessible | current | Entry of logServerTable |
| 1.3.6.1.4.1.21296.1.2.21.2.1.1.1 | ColumnlogServerName | read-only | current | The name for the endpoint to forwarding logs to. |
| 1.3.6.1.4.1.21296.1.2.21.2.1.1.2 | ColumnlogServerAddress | read-only | current | The leaf uniquely specifies the ipv4 or ipv6 address of the remote host. |
| 1.3.6.1.4.1.21296.1.2.21.2.1.1.3 | ColumnlogServerTransport | read-only | current | It is the transport protocol used when forwarding logs. default value :udp |
| 1.3.6.1.4.1.21296.1.2.21.2.1.1.4 | ColumnlogServerPort | read-only | current | This leaf specifies the port number used to deliver messages to the remote server. |
| 1.3.6.1.4.1.21296.1.2.21.2.1.1.5 | ColumnlogServerDestinationFacilityOverride | read-only | current | When not disabled, this leaf specifies the facility used in messages delivered to the remote server. default value :disabled |
| 1.3.6.1.4.1.21296.1.2.21.2.1.1.6 | ColumnlogServerSourceFacilities | read-only | current | List of syslog facilities used in this configuration. Will default to 'all' facilities if not provided.This is originally a YANG leaf-list, here encoded as a c… |
| 1.3.6.1.4.1.21296.1.2.21.2.1.1.7 | ColumnlogServerPatternMatch | read-only | current | The reply will be truncated in 128 bytes. Regex pattern that all entries need to obey. |
| 1.3.6.1.4.1.21296.1.2.21.2.1.1.8 | ColumnlogServerMessageCoalescence | read-only | current | If true, prevent flooding of identical messages during abnormal conditions. If there are multiple identical log messages, there will be one message logged full… |
| 1.3.6.1.4.1.21296.1.2.21.2.1.1.9 | ColumnlogServerEnabled | read-only | current | Allows to toggle this syslog server. default value :true |
| 1.3.6.1.4.1.21296.1.2.21.2.1.1.10 | ColumnlogServerMessageFormat | read-only | current | Identifies the syslog messaging format default value :rfc5424 |
| 1.3.6.1.4.1.21296.1.2.21.2.1.1.11 | ColumnlogServerOrigin | read-only | current | Log-server address assignment method, user can convert DHCP configured Log-server entry into a manual configured by changing this attribute. default value :man… |
| 1.3.6.1.4.1.21296.1.2.21.2.1.1.12 | ColumnlogServerSensitiveData | read-only | current | Whether the local file has logs include sensitive data. default value :none |
| 1.3.6.1.4.1.21296.1.2.21.2.1.1.13 | ColumnlogServerAlarmReportControl | read-only | current | Controls the reporting of alarms for this particular object. default value :allowed |
| 1.3.6.1.4.1.21296.1.2.21.3 | NodelogServerFacilityFilter | |||
| 1.3.6.1.4.1.21296.1.2.21.3.1 | TablelogServerFacilityFilterTable | not-accessible | current | Selector that allows to filter log messages based on their source facilities and severities. This is a filter based on source-facilities leaf-list (can only ad… |
| 1.3.6.1.4.1.21296.1.2.21.3.1.1 | RowlogServerFacilityFilterEntry | not-accessible | current | Entry of logServerFacilityFilterTable |
| 1.3.6.1.4.1.21296.1.2.21.3.1.1.1 | ColumnlogServerFacilityFilterName | read-only | current | Identifies a single syslog facility, or all of them if value is 'all'. |
| 1.3.6.1.4.1.21296.1.2.21.3.1.1.2 | ColumnlogServerFacilityFilterSeverity | read-only | current | The system log selected severity level for forwarding. The default severity level is all levels default value :informational |
| 1.3.6.1.4.1.21296.1.2.21.3.1.1.3 | ColumnlogServerFacilityFilterCompareOp | read-only | current | This leaf describes the option to specify how the severity comparison is performed. The default severity level is all levels default value :equals-or-higher |
| 1.3.6.1.4.1.21296.1.2.21.4 | NodelogFile | |||
| 1.3.6.1.4.1.21296.1.2.21.4.1 | TablelogFileTable | not-accessible | current | Local syslog files supported by the system. |
| 1.3.6.1.4.1.21296.1.2.21.4.1.1 | RowlogFileEntry | not-accessible | current | Entry of logFileTable |
| 1.3.6.1.4.1.21296.1.2.21.4.1.1.1 | ColumnlogFileName | read-only | current | The file name without the .log extension. |
| 1.3.6.1.4.1.21296.1.2.21.4.1.1.2 | ColumnlogFileNumberOfFiles | read-only | current | Maximum number of log files retained. When rotating files due to max size being reached, the oldest files will be discarded if the total number of files is gre… |
| 1.3.6.1.4.1.21296.1.2.21.4.1.1.3 | ColumnlogFileMaxFileSize | read-only | current | Maximum file size before rotation. UNITS:megabytes default value :30 |
| 1.3.6.1.4.1.21296.1.2.21.4.1.1.4 | ColumnlogFileSourceFacilities | read-only | current | List of syslog facilities used in this configuration. Will default to 'all' facilities if not provided.This is originally a YANG leaf-list, here encoded as a c… |
| 1.3.6.1.4.1.21296.1.2.21.4.1.1.5 | ColumnlogFilePatternMatch | read-only | current | The reply will be truncated in 128 bytes. Regex pattern that all entries need to obey. |
| 1.3.6.1.4.1.21296.1.2.21.4.1.1.6 | ColumnlogFileSensitiveData | read-only | current | Whether the local file has logs include sensitive data. default value :none |
| 1.3.6.1.4.1.21296.1.2.21.5 | NodelogFileFacilityFilter | |||
| 1.3.6.1.4.1.21296.1.2.21.5.1 | TablelogFileFacilityFilterTable | not-accessible | current | Selector that allows to filter log messages based on their source facilities and severities. |
| 1.3.6.1.4.1.21296.1.2.21.5.1.1 | RowlogFileFacilityFilterEntry | not-accessible | current | Entry of logFileFacilityFilterTable |
| 1.3.6.1.4.1.21296.1.2.21.5.1.1.1 | ColumnlogFileFacilityFilterName | read-only | current | Identifies a single syslog facility, or all of them if value is 'all'. |
| 1.3.6.1.4.1.21296.1.2.21.5.1.1.2 | ColumnlogFileFacilityFilterSeverity | read-only | current | The system log selected severity level for forwarding. The default severity level is all levels default value :informational |
| 1.3.6.1.4.1.21296.1.2.21.5.1.1.3 | ColumnlogFileFacilityFilterCompareOp | read-only | current | This leaf describes the option to specify how the severity comparison is performed. The default severity level is all levels default value :equals-or-higher |
| 1.3.6.1.4.1.21296.1.2.21.6 | NodelogConsole | |||
| 1.3.6.1.4.1.21296.1.2.21.6.1 | ScalarlogConsoleSourceFacilities | read-only | current | List of syslog facilities used in this configuration. Will default to 'all' facilities if not provided.This is originally a YANG leaf-list, here encoded as a c… |
| 1.3.6.1.4.1.21296.1.2.21.6.2 | ScalarlogConsoleEnabled | read-only | current | Switches on and off the console logging. default value :false |
| 1.3.6.1.4.1.21296.1.2.21.7 | NodelogConsoleFacilityFilter | |||
| 1.3.6.1.4.1.21296.1.2.21.7.1 | TablelogConsoleFacilityFilterTable | not-accessible | current | Selector that allows to filter log messages based on their source facilities and severities. |
| 1.3.6.1.4.1.21296.1.2.21.7.1.1 | RowlogConsoleFacilityFilterEntry | not-accessible | current | Entry of logConsoleFacilityFilterTable |
| 1.3.6.1.4.1.21296.1.2.21.7.1.1.1 | ColumnlogConsoleFacilityFilterName | read-only | current | Identifies a single syslog facility, or all of them if value is 'all'. |
| 1.3.6.1.4.1.21296.1.2.21.7.1.1.2 | ColumnlogConsoleFacilityFilterSeverity | read-only | current | The system log selected severity level for forwarding. The default severity level is all levels default value :informational |
| 1.3.6.1.4.1.21296.1.2.21.7.1.1.3 | ColumnlogConsoleFacilityFilterCompareOp | read-only | current | This leaf describes the option to specify how the severity comparison is performed. The default severity level is all levels default value :equals-or-higher |
| 1.3.6.1.4.1.21296.1.2.22 | NodemgmtProtocols | |||
| 1.3.6.1.4.1.21296.1.2.22.2 | Nodessh | |||
| 1.3.6.1.4.1.21296.1.2.22.2.1 | ScalarsshEnabled | read-only | current | Enables direct access to shell via ssh. default value :false |
| 1.3.6.1.4.1.21296.1.2.22.2.2 | ScalarsshPort | read-only | current | Port listening for ssh login that goes directly to shell. default value :8022 |
| 1.3.6.1.4.1.21296.1.2.22.2.3 | ScalarsshPreLoginMessage | read-only | current | The reply will be truncated in 128 bytes. Welcome message displayed before user login. |
| 1.3.6.1.4.1.21296.1.2.22.2.4 | ScalarsshPostLoginMessage | read-only | current | The reply will be truncated in 128 bytes. Welcome message displayed after user login. |
| 1.3.6.1.4.1.21296.1.2.22.2.5 | ScalarsshSftpSupport | read-only | current | Controls whether SFTP is enabled or not. default value :enabled |
| 1.3.6.1.4.1.21296.1.2.22.3 | NodesshHostKey | |||
| 1.3.6.1.4.1.21296.1.2.22.3.1 | TablesshHostKeyTable | not-accessible | current | Global(for server and client side SSHv2 based apps) SSHv2 host keys. There needs to be one host key per supported algorithm. The system auto-generates a host-k… |
| 1.3.6.1.4.1.21296.1.2.22.3.1.1 | RowsshHostKeyEntry | not-accessible | current | Entry of sshHostKeyTable |
| 1.3.6.1.4.1.21296.1.2.22.3.1.1.1 | ColumnsshHostKeyPublicKeyAlgorithm | read-only | current | The type of host key algorithm in use. |
| 1.3.6.1.4.1.21296.1.2.22.3.1.1.2 | ColumnsshHostKeyPublicKey | read-only | current | The reply will be truncated in 128 bytes. SSHv2(OpenSSH Portable) host public key component encoded in PEM format: <key type><SPACE>...base64 encoded OpenSSH p… |
| 1.3.6.1.4.1.21296.1.2.22.3.1.1.3 | ColumnsshHostKeyLabel | read-only | current | The reply will be truncated in 128 bytes. User label. |
| 1.3.6.1.4.1.21296.1.2.22.3.1.1.4 | ColumnsshHostKeyFingerprintAlgorithm | read-only | current | The type of hash algorithm in use for computing the key fingerprint |
| 1.3.6.1.4.1.21296.1.2.22.3.1.1.5 | ColumnsshHostKeyFingerprint | read-only | current | Fingerprint string as a sequence of pairs of hex digits. SSHv2 public key fingerprint examples for MD5 and SHA256 hash: md5sum fingerprint => b2:9c:cd:30:b1:38… |
| 1.3.6.1.4.1.21296.1.2.22.4 | NodesshKnownHost | |||
| 1.3.6.1.4.1.21296.1.2.22.4.1 | TablesshKnownHostTable | not-accessible | current | SSHv2 known hosts entry. |
| 1.3.6.1.4.1.21296.1.2.22.4.1.1 | RowsshKnownHostEntry | not-accessible | current | Entry of sshKnownHostTable |
| 1.3.6.1.4.1.21296.1.2.22.4.1.1.1 | ColumnsshKnownHostId | read-only | current | A unique identifier (name) for this entry. |
| 1.3.6.1.4.1.21296.1.2.22.4.1.1.2 | ColumnsshKnownHostAddress | read-only | current | The hostname/IPv4/IPv6 address of the allowed/known peer host. |
| 1.3.6.1.4.1.21296.1.2.22.4.1.1.3 | ColumnsshKnownHostPublicKeyAlgorithm | read-only | current | The type of host key algorithm in use. |
| 1.3.6.1.4.1.21296.1.2.22.4.1.1.4 | ColumnsshKnownHostPublicKey | read-only | current | The reply will be truncated in 128 bytes. SSHv2(OpenSSH Portable) host public key component encoded in PEM format: <key type><SPACE>...base64 encoded OpenSSH p… |
| 1.3.6.1.4.1.21296.1.2.22.4.1.1.5 | ColumnsshKnownHostLabel | read-only | current | The reply will be truncated in 128 bytes. User label. |
| 1.3.6.1.4.1.21296.1.2.22.5 | Nodecli | |||
| 1.3.6.1.4.1.21296.1.2.22.5.1 | ScalarcliEnabled | read-only | current | Enables/disables the CLI management protocol. default value :true |
| 1.3.6.1.4.1.21296.1.2.22.5.2 | ScalarcliPort | read-only | current | The port which listens for CLI access via ssh. default value :22 |
| 1.3.6.1.4.1.21296.1.2.22.5.3 | ScalarcliScriptDir | read-only | current | Location in the filesystem where CLI scripts are stored. |
| 1.3.6.1.4.1.21296.1.2.22.5.4 | ScalarcliDefaultInteractiveMode | read-only | current | Defines whether CLI sessions have interactive-mode enabled or disabled by default. Individual sessions can deviate from this global flag by configuring the int… |
| 1.3.6.1.4.1.21296.1.2.22.5.5 | ScalarcliShowAlarmColumns | read-only | current | Columns to display in the output of 'show alarm' CLI command. Possible options are the standard alarm fields, and additionally the following values: - default-… |
| 1.3.6.1.4.1.21296.1.2.22.6 | NodecliAlias | |||
| 1.3.6.1.4.1.21296.1.2.22.6.1 | TablecliAliasTable | not-accessible | current | List of aliases used in CLI. Can only be accessed via 'alias/unalias' CLI commands. |
| 1.3.6.1.4.1.21296.1.2.22.6.1.1 | RowcliAliasEntry | not-accessible | current | Entry of cliAliasTable |
| 1.3.6.1.4.1.21296.1.2.22.6.1.1.1 | ColumncliAliasName | read-only | current | The reply will be truncated in 128 bytes. Name of the alias |
| 1.3.6.1.4.1.21296.1.2.22.6.1.1.2 | ColumncliAliasValue | read-only | current | The reply will be truncated in 128 bytes. Value of the alias |
| 1.3.6.1.4.1.21296.1.2.22.7 | NodecliSessionConfig | |||
| 1.3.6.1.4.1.21296.1.2.22.7.1 | TablecliSessionConfigTable | not-accessible | current | Configurations associated with individual CLI sessions. |
| 1.3.6.1.4.1.21296.1.2.22.7.1.1 | RowcliSessionConfigEntry | not-accessible | current | Entry of cliSessionConfigTable |
| 1.3.6.1.4.1.21296.1.2.22.7.1.1.1 | ColumncliSessionConfigSessionId | read-only | current | The identifier of the CLI session |
| 1.3.6.1.4.1.21296.1.2.22.7.1.1.2 | ColumncliSessionConfigCliLines | read-only | current | Number of rows to be used for display. This value is automatically discovered when possible default value :40 |
| 1.3.6.1.4.1.21296.1.2.22.7.1.1.3 | ColumncliSessionConfigCliColumns | read-only | current | Number of columns to be used for display. This value is automatically discovered when possible default value :140 |
| 1.3.6.1.4.1.21296.1.2.22.7.1.1.4 | ColumncliSessionConfigInteractiveMode | read-only | current | This determines if the CLI shall issue interactive prompt (e.g. for prompting additional information, or for confirmation of user initiated actions). Enabled =… |
| 1.3.6.1.4.1.21296.1.2.22.7.1.1.5 | ColumncliSessionConfigDisplayTimestamp | read-only | current | This determines if the current timestamp will be printed on every CLI command. default value :false |
| 1.3.6.1.4.1.21296.1.2.22.8 | NodeserialConsole | |||
| 1.3.6.1.4.1.21296.1.2.22.8.1 | ScalarserialConsoleGlobalSwitch | read-only | current | Allow access by serial-console. Note: each console port can override this global behavior. default value :enabled |
| 1.3.6.1.4.1.21296.1.2.22.8.2 | ScalarserialConsoleGlobalTimeout | read-only | current | Serial console inactivity timeout. Can be set to zero to disable inactivity timer. UNITS:minutes default value :60 |
| 1.3.6.1.4.1.21296.1.2.22.9 | Nodenetconf | |||
| 1.3.6.1.4.1.21296.1.2.22.9.1 | ScalarnetconfEnabled | read-only | current | Enables/disables the NETCONF management protocol. default value :true |
| 1.3.6.1.4.1.21296.1.2.22.9.2 | ScalarnetconfPort | read-only | current | [Deprecated in favor of ssh-port.] The port which listens for NETCONF access via SSH. default value :830 |
| 1.3.6.1.4.1.21296.1.2.22.9.3 | ScalarnetconfAnnotateCliName | read-only | current | If enabled, annotates NETCONF XML output with cli names for traceability. default value :false |
| 1.3.6.1.4.1.21296.1.2.22.9.4 | ScalarnetconfHelloTimeout | read-only | current | Specifies the number of seconds that a session may exist before the hello PDU is received/transmitted. A session will be dropped if no hello PDU is received/tr… |
| 1.3.6.1.4.1.21296.1.2.22.9.5 | ScalarnetconfStaticInfoInNotifs | read-only | current | List of YANG identifiers that are statically included in notifications. If they are present in objects that are notified. Applicable for management protocols w… |
| 1.3.6.1.4.1.21296.1.2.22.9.6 | ScalarnetconfTlsEnabled | read-only | current | Enables/disables TLS access to the NETCONF management protocol. default value :true |
| 1.3.6.1.4.1.21296.1.2.22.9.7 | ScalarnetconfTlsPort | read-only | current | The port which listens for NETCONF access via TLS. default value :6513 |
| 1.3.6.1.4.1.21296.1.2.22.9.8 | ScalarnetconfSshEnabled | read-only | current | Enables/disables SSH access to the NETCONF management protocol. default value :true |
| 1.3.6.1.4.1.21296.1.2.22.9.9 | ScalarnetconfSshPort | read-only | current | The port which listens for NETCONF access via SSH. default value :830 |
| 1.3.6.1.4.1.21296.1.2.22.10 | Nodegrpc | |||
| 1.3.6.1.4.1.21296.1.2.22.10.1 | ScalargrpcEnabled | read-only | current | Enables/disables the gRPC management protocol. default value :true |
| 1.3.6.1.4.1.21296.1.2.22.10.2 | ScalargrpcPort | read-only | current | The port which listens for gNMI & gNOI access via gRPC. default value :50051 |
| 1.3.6.1.4.1.21296.1.2.22.10.3 | ScalargrpcGnmiGetEncodingGranularity | read-only | current | Allows to configure the granularity of data in gNMI Get responses, when encoded with JSON. default value :per-object |
| 1.3.6.1.4.1.21296.1.2.22.11 | Nodesnmp | |||
| 1.3.6.1.4.1.21296.1.2.22.11.1 | ScalarsnmpEnabled | read-only | current | User configurable switch to enable or disable global SNMP access. default value :true |
| 1.3.6.1.4.1.21296.1.2.22.11.2 | ScalarsnmpPort | read-only | current | User configurable port where the NE is listening for SNMP requests. default value :161 |
| 1.3.6.1.4.1.21296.1.2.22.11.3 | ScalarsnmpEngineId | read-only | current | The reply will be truncated in 128 bytes. SNMP EngineID of the NE. The EngineID will follow the EngineID format 3 defined in RFC3411. The MAC address in the En… |
| 1.3.6.1.4.1.21296.1.2.22.11.4 | ScalarsnmpEngineBootCount | read-only | current | SNMP engine boot count. Counts how many times the engine has restarted. default value :0 |
| 1.3.6.1.4.1.21296.1.2.22.12 | NodesnmpCommunity | |||
| 1.3.6.1.4.1.21296.1.2.22.12.1 | TablesnmpCommunityTable | not-accessible | current | List of SNMP Community Strings. Note: trap-community-string is located in the snmp-target object. |
| 1.3.6.1.4.1.21296.1.2.22.12.1.1 | RowsnmpCommunityEntry | not-accessible | current | Entry of snmpCommunityTable |
| 1.3.6.1.4.1.21296.1.2.22.12.1.1.1 | ColumnsnmpCommunityName | read-only | current | Name for the community (different from the community string itself). |
| 1.3.6.1.4.1.21296.1.2.22.12.1.1.2 | ColumnsnmpCommunityCommunityString | read-only | current | Community String. |
| 1.3.6.1.4.1.21296.1.2.22.12.1.1.3 | ColumnsnmpCommunityEnabled | read-only | current | User configurable switch to enable or disable this community-string. default value :true |
| 1.3.6.1.4.1.21296.1.2.22.12.1.1.4 | ColumnsnmpCommunityCommunityStringAccess | read-only | current | SNMP access right of this community string. default value :read-only |
| 1.3.6.1.4.1.21296.1.2.22.13 | NodesnmpTarget | |||
| 1.3.6.1.4.1.21296.1.2.22.13.1 | TablesnmpTargetTable | not-accessible | current | List of SNMP targets (trap listeners) |
| 1.3.6.1.4.1.21296.1.2.22.13.1.1 | RowsnmpTargetEntry | not-accessible | current | Entry of snmpTargetTable |
| 1.3.6.1.4.1.21296.1.2.22.13.1.1.1 | ColumnsnmpTargetTargetName | read-only | current | Identifies the SNMP target |
| 1.3.6.1.4.1.21296.1.2.22.13.1.1.2 | ColumnsnmpTargetEnabled | read-only | current | User configurable switch to enable or disable this snmp-target. default value :true |
| 1.3.6.1.4.1.21296.1.2.22.13.1.1.3 | ColumnsnmpTargetSnmpVersion | read-only | current | snmp version. default value :v2c |
| 1.3.6.1.4.1.21296.1.2.22.13.1.1.4 | ColumnsnmpTargetTrapCommunityString | read-only | current | Community string used for SNMP traps. Only of relevance for snmpv2c. default value :nokia |
| 1.3.6.1.4.1.21296.1.2.22.13.1.1.5 | ColumnsnmpTargetSnmpv3User | read-only | current | Indicate the snmpv3 user. Only of relevance for snmpv3. |
| 1.3.6.1.4.1.21296.1.2.22.13.1.1.6 | ColumnsnmpTargetTargetAddress | read-only | current | IP address or hostname of the SNMP target |
| 1.3.6.1.4.1.21296.1.2.22.13.1.1.7 | ColumnsnmpTargetTargetPort | read-only | current | UDP port number. default value :162 |
| 1.3.6.1.4.1.21296.1.2.22.13.1.1.8 | ColumnsnmpTargetTargetTransport | read-only | current | Type of transport for the SNMP target default value :udp |
| 1.3.6.1.4.1.21296.1.2.22.14 | Nodesnmpv3User | |||
| 1.3.6.1.4.1.21296.1.2.22.14.1 | Tablesnmpv3UserTable | not-accessible | current | SNMPv3 user configuration. |
| 1.3.6.1.4.1.21296.1.2.22.14.1.1 | Rowsnmpv3UserEntry | not-accessible | current | Entry of snmpv3UserTable |
| 1.3.6.1.4.1.21296.1.2.22.14.1.1.1 | Columnsnmpv3UserName | read-only | current | SNMPv3 user name. |
| 1.3.6.1.4.1.21296.1.2.22.14.1.1.2 | Columnsnmpv3UserUserSecLevel | read-only | current | Specifies the SNMPv3 user security level. Note: when NE is in secure-mode, only auth-priv is allowed. default value :no-auth-no-priv |
| 1.3.6.1.4.1.21296.1.2.22.14.1.1.3 | Columnsnmpv3UserAuthProtocol | read-only | current | Specifies the authentication protocol that the SNMPv3 user being created will use. Conditions:../user-sec-level != 'no-auth-no-priv' default value :SHA |
| 1.3.6.1.4.1.21296.1.2.22.14.1.1.4 | Columnsnmpv3UserAuthPassphrase | read-only | current | Specifies the SNMPv3 authentication pass phrase. Conditions:../user-sec-level != 'no-auth-no-priv' |
| 1.3.6.1.4.1.21296.1.2.22.14.1.1.5 | Columnsnmpv3UserPrivProtocol | read-only | current | Specifies the privacy protocol that the SNMPv3 user being created will use. Conditions:../user-sec-level = 'auth-priv' default value :AES128 |
| 1.3.6.1.4.1.21296.1.2.22.14.1.1.6 | Columnsnmpv3UserPrivPassphrase | read-only | current | Specifies the SNMPv3 privacy pass phrase. Conditions:../user-sec-level = 'auth-priv' |
| 1.3.6.1.4.1.21296.1.2.22.15 | NodedialOutServer | |||
| 1.3.6.1.4.1.21296.1.2.22.15.1 | TabledialOutServerTable | not-accessible | current | Dial-out server configuration and state. A dial-out-server configuration automatically triggers a connection against the server, with client-server functionali… |
| 1.3.6.1.4.1.21296.1.2.22.15.1.1 | RowdialOutServerEntry | not-accessible | current | Entry of dialOutServerTable |
| 1.3.6.1.4.1.21296.1.2.22.15.1.1.1 | ColumndialOutServerName | read-only | current | Dial-out-server name. |
| 1.3.6.1.4.1.21296.1.2.22.15.1.1.2 | ColumndialOutServerAddress | read-only | current | Dial-out-server IPv4/IPv6 address or hostname. |
| 1.3.6.1.4.1.21296.1.2.22.15.1.1.3 | ColumndialOutServerProtocol | read-only | current | Dial-out-server session type. default value :netconf |
| 1.3.6.1.4.1.21296.1.2.22.15.1.1.4 | ColumndialOutServerPort | read-only | current | Dial-out-server session port. |
| 1.3.6.1.4.1.21296.1.2.22.15.1.1.5 | ColumndialOutServerTransport | read-only | current | Dial-out-server transport protocol. |
| 1.3.6.1.4.1.21296.1.2.22.15.1.1.6 | ColumndialOutServerRetryPolicy | read-only | current | Retry policy after a timeout. default value :progressive-back-off |
| 1.3.6.1.4.1.21296.1.2.22.15.1.1.7 | ColumndialOutServerRetry | read-only | current | Number of retries before giving up. Conditions:../retry-policy = 'retry-then-stop' default value :3 |
| 1.3.6.1.4.1.21296.1.2.22.15.1.1.8 | ColumndialOutServerTimeout | read-only | current | Wait time until timeout. Conditions:../retry-policy != 'progressive-back-off' UNITS:seconds default value :10 |
| 1.3.6.1.4.1.21296.1.2.22.15.1.1.9 | ColumndialOutServerLabel | read-only | current | The reply will be truncated in 128 bytes. User label. |
| 1.3.6.1.4.1.21296.1.2.22.15.1.1.10 | ColumndialOutServerAutoConnect | read-only | current | If true, automatically tries to connect to this dial-out-server. Note that a server with auto-connect false can still be connected manually via the call-home R… |
| 1.3.6.1.4.1.21296.1.2.22.15.1.1.11 | ColumndialOutServerConnectionState | read-only | current | Connection state to the dial-out-server. default value :disabled |
| 1.3.6.1.4.1.21296.1.2.22.15.1.1.12 | ColumndialOutServerAlarmReportControl | read-only | current | Controls the reporting of alarms for this particular object. default value :allowed |
| 1.3.6.1.4.1.21296.1.2.22.16 | NodedataModel | |||
| 1.3.6.1.4.1.21296.1.2.22.16.1 | TabledataModelTable | not-accessible | current | Available YANG Data models for loading/unloading. |
| 1.3.6.1.4.1.21296.1.2.22.16.1.1 | RowdataModelEntry | not-accessible | current | Entry of dataModelTable |
| 1.3.6.1.4.1.21296.1.2.22.16.1.1.1 | ColumndataModelName | read-only | current | The reply will be truncated in 128 bytes. Model name. |
| 1.3.6.1.4.1.21296.1.2.22.16.1.1.2 | ColumndataModelDescription | read-only | current | The reply will be truncated in 128 bytes. Data model description. |
| 1.3.6.1.4.1.21296.1.2.22.16.1.1.3 | ColumndataModelEnabled | read-only | current | Allows to load/unload this data model.A loaded data model means that it can be used via the management interfaces. default value :false |
| 1.3.6.1.4.1.21296.1.2.22.16.1.1.4 | ColumndataModelConfigCache | read-only | current | Allows caching of config data for the given data-model. Note: this attribute is obsolete and has no impact in the system - this is kept for temporary backward … |
| 1.3.6.1.4.1.21296.1.2.22.18 | Nodetask | |||
| 1.3.6.1.4.1.21296.1.2.22.18.1 | TabletaskTable | not-accessible | current | User configurable scheduled task. Can define single occurrence or periodic commands. |
| 1.3.6.1.4.1.21296.1.2.22.18.1.1 | RowtaskEntry | not-accessible | current | Entry of taskTable |
| 1.3.6.1.4.1.21296.1.2.22.18.1.1.1 | ColumntaskName | read-only | current | Identifier of the scheduled task. |
| 1.3.6.1.4.1.21296.1.2.22.18.1.1.2 | ColumntaskEnabled | read-only | current | Enable switch of this task; allows user to disable a task without deleting it. default value :true |
| 1.3.6.1.4.1.21296.1.2.22.18.1.1.3 | ColumntaskLabel | read-only | current | The reply will be truncated in 128 bytes. User label. |
| 1.3.6.1.4.1.21296.1.2.22.18.1.1.4 | ColumntaskAlarmReportControl | read-only | current | Controls the reporting of alarms for this particular object. default value :inhibited |
| 1.3.6.1.4.1.21296.1.2.22.18.1.1.5 | ColumntaskCommand | read-only | current | The reply will be truncated in 128 bytes. Command that is scheduled. Content will depend on the command-type. |
| 1.3.6.1.4.1.21296.1.2.22.18.1.1.6 | ColumntaskCommandType | read-only | current | Type of configured command. default value :cli |
| 1.3.6.1.4.1.21296.1.2.22.18.1.1.7 | ColumntaskFrequency | read-only | current | Frequency interval for setting up a periodic scheduled task. If empty (default value), represents a single-occurrence task. Frequency interval is provided usin… |
| 1.3.6.1.4.1.21296.1.2.22.18.1.1.8 | ColumntaskStartTime | read-only | current | Timestamp to start the task. For periodic tasks, this is the timestamp for the first trigger of the task. If not provided, uses current time as start-time. |
| 1.3.6.1.4.1.21296.1.2.22.18.1.1.9 | ColumntaskEndTime | read-only | current | Timestamp to stop the periodic task. Not relevant for single-occurrence tasks. default value :never |
| 1.3.6.1.4.1.21296.1.2.22.18.1.1.10 | ColumntaskPersistent | read-only | current | If true, this scheduled task will persist a system restart. default value :true |
| 1.3.6.1.4.1.21296.1.2.22.18.1.1.11 | ColumntaskStatus | read-only | current | Current operational state of the scheduled task. default value :scheduled |
| 1.3.6.1.4.1.21296.1.2.22.18.1.1.12 | ColumntaskNextRun | read-only | current | Next run timestamp. May be 'never' for finished tasks. default value :never |
| 1.3.6.1.4.1.21296.1.2.22.18.1.1.13 | ColumntaskPreviousRun | read-only | current | Previous task run timestamp. default value :never |
| 1.3.6.1.4.1.21296.1.2.22.18.1.1.14 | ColumntaskPreviousResult | read-only | current | Previous task run result. |
| 1.3.6.1.4.1.21296.1.2.22.18.1.1.15 | ColumntaskPreviousOutput | read-only | current | The reply will be truncated in 128 bytes. Output of the previous task run. |
| 1.3.6.1.4.1.21296.1.2.22.18.1.1.16 | ColumntaskNumberOfRuns | read-only | current | Defines the number of times a periodic task is executed before stopping. default value :no-limit |
| 1.3.6.1.4.1.21296.1.2.22.18.1.1.17 | ColumntaskRemainingRuns | read-only | current | Counter of how many runs are pending until task stops. default value :0 |
| 1.3.6.1.4.1.21296.1.2.22.19 | NodesshAuthorizedKey | |||
| 1.3.6.1.4.1.21296.1.2.22.19.1 | TablesshAuthorizedKeyTable | not-accessible | current | SSHv2 authorized key. Each authorized key entry contains a trusted public key for SSHv2 user authentication. |
| 1.3.6.1.4.1.21296.1.2.22.19.1.1 | RowsshAuthorizedKeyEntry | not-accessible | current | Entry of sshAuthorizedKeyTable |
| 1.3.6.1.4.1.21296.1.2.22.19.1.1.1 | ColumnsshAuthorizedKeyUserName | read-only | current | User owning the authorized key. Can be local or remote user. |
| 1.3.6.1.4.1.21296.1.2.22.19.1.1.2 | ColumnsshAuthorizedKeyKeyId | read-only | current | A unique identifier (name) for this entry. |
| 1.3.6.1.4.1.21296.1.2.22.19.1.1.3 | ColumnsshAuthorizedKeyPublicKeyAlgorithm | read-only | current | The type of key algorithm used. Auto-discovered based on provided public key. |
| 1.3.6.1.4.1.21296.1.2.22.19.1.1.4 | ColumnsshAuthorizedKeyPublicKey | read-only | current | The reply will be truncated in 128 bytes. Base64-encoded OpenSSH public key. |
| 1.3.6.1.4.1.21296.1.2.22.19.1.1.5 | ColumnsshAuthorizedKeyLabel | read-only | current | The reply will be truncated in 128 bytes. User label. |
| 1.3.6.1.4.1.21296.1.2.22.19.1.1.6 | ColumnsshAuthorizedKeyKeyExpirationDate | read-only | current | Expiration date for SSH authorized key. |
| 1.3.6.1.4.1.21296.1.2.22.19.1.1.7 | ColumnsshAuthorizedKeyKeyState | read-only | current | State is 'disabled' if key is expired, 'enabled' otherwise. default value :enabled |
| 1.3.6.1.4.1.21296.1.2.22.19.1.1.8 | ColumnsshAuthorizedKeyAlarmReportControl | read-only | current | Controls the reporting of alarms for this particular object. default value :allowed |
| 1.3.6.1.4.1.21296.1.2.22.20 | Nodetl1 | |||
| 1.3.6.1.4.1.21296.1.2.22.20.1 | Scalartl1OverSshEnabled | read-only | current | Decides whether TL1 protocol is accessible over SSH or not. default value :true |
| 1.3.6.1.4.1.21296.1.2.22.20.2 | Scalartl1SshInteractivePort | read-only | current | SSH port that gives access to interactive interface of TL1 protocol server. default value :9095 |
| 1.3.6.1.4.1.21296.1.2.22.20.3 | Scalartl1SshScriptingPort | read-only | current | SSH port that gives access to non-interactive or scripting interface of TL1 protocol server. This interface does not echo terminal characters to client. defaul… |
| 1.3.6.1.4.1.21296.1.2.22.21 | Noderestconf | |||
| 1.3.6.1.4.1.21296.1.2.22.21.1 | ScalarrestconfEnabled | read-only | current | User configurable switch to enable or disable RESTCONF access. default value :true |
| 1.3.6.1.4.1.21296.1.2.22.21.2 | ScalarrestconfHttpEnabled | read-only | current | User configurable switch to enable or disable RESTCONF HTTP access. default value :false |
| 1.3.6.1.4.1.21296.1.2.22.21.3 | ScalarrestconfHttpsEnabled | read-only | current | User configurable switch to enable or disable RESTCONF HTTPS access. default value :true |
| 1.3.6.1.4.1.21296.1.2.22.21.4 | ScalarrestconfHttpPort | read-only | current | User configurable RESTCONF HTTP port. default value :8080 |
| 1.3.6.1.4.1.21296.1.2.22.21.5 | ScalarrestconfHttpsPort | read-only | current | User configurable RESTCONF HTTPS port. default value :8181 |
| 1.3.6.1.4.1.21296.1.2.22.21.6 | ScalarrestconfCookieTimeout | read-only | current | Timeout of a cookie based RESTCONF session. UNITS:minutes default value :5 |
| 1.3.6.1.4.1.21296.1.2.22.21.7 | ScalarrestconfApiRoot | read-only | current | Root of the RESTCONF API. default value :/restconf |
| 1.3.6.1.4.1.21296.1.2.22.21.8 | ScalarrestconfOpenapiRoot | read-only | current | RESTCONF OpenAPI specification URL default value :/restconf/docs |
| 1.3.6.1.4.1.21296.1.2.22.22 | NodehttpFileServer | |||
| 1.3.6.1.4.1.21296.1.2.22.22.1 | ScalarhttpFileServerEnabled | read-only | current | User configurable switch to enable or disable file server access. default value :true |
| 1.3.6.1.4.1.21296.1.2.22.22.2 | ScalarhttpFileServerHttpEnabled | read-only | current | User configurable switch to enable or disable HTTP protocol for file server access. default value :false |
| 1.3.6.1.4.1.21296.1.2.22.22.3 | ScalarhttpFileServerHttpsEnabled | read-only | current | User configurable switch to enable or disable HTTPS protocol for file server access. default value :true |
| 1.3.6.1.4.1.21296.1.2.22.22.4 | ScalarhttpFileServerHttpPort | read-only | current | User configurable HTTP port. default value :8980 |
| 1.3.6.1.4.1.21296.1.2.22.22.5 | ScalarhttpFileServerHttpsPort | read-only | current | User configurable HTTPS port. default value :8981 |
| 1.3.6.1.4.1.21296.1.2.22.22.6 | ScalarhttpFileServerUrlBase | read-only | current | The base URL use to redirect to the file transfer application. default value :/transfer |
| 1.3.6.1.4.1.21296.1.2.22.23 | NodefastTelemetry | |||
| 1.3.6.1.4.1.21296.1.2.22.23.1 | ScalarfastTelemetryEnabled | read-only | current | User configurable switch to enable or disable fast telemetry streaming. default value :false |
| 1.3.6.1.4.1.21296.1.2.22.23.2 | ScalarfastTelemetryProtocol | read-only | current | User configurable attribute to select the desired protocol. default value :gnmi-openconfig |
| 1.3.6.1.4.1.21296.1.2.22.23.3 | ScalarfastTelemetryPort | read-only | current | User configurable port. default value :57400 |
| 1.3.6.1.4.1.21296.1.2.22.25 | NodenotificationType | |||
| 1.3.6.1.4.1.21296.1.2.22.25.1 | TablenotificationTypeTable | not-accessible | current | List of supported notifications. |
| 1.3.6.1.4.1.21296.1.2.22.25.1.1 | RownotificationTypeEntry | not-accessible | current | Entry of notificationTypeTable |
| 1.3.6.1.4.1.21296.1.2.22.25.1.1.1 | ColumnnotificationTypeName | read-only | current | Notification qualified name (prefix:name). |
| 1.3.6.1.4.1.21296.1.2.22.25.1.1.2 | ColumnnotificationTypeNamespace | read-only | current | Notification namespace. |
| 1.3.6.1.4.1.21296.1.2.22.25.1.1.3 | ColumnnotificationTypeDescription | read-only | current | Description of the notification. |
| 1.3.6.1.4.1.21296.1.2.22.25.1.1.4 | ColumnnotificationTypeScope | read-only | current | Indicates the scope of the notification - which data model it applies to. |
| 1.3.6.1.4.1.21296.1.2.22.26 | NodenotificationStream | |||
| 1.3.6.1.4.1.21296.1.2.22.26.1 | TablenotificationStreamTable | not-accessible | current | List of supported NETCONF streams, their description and other information. |
| 1.3.6.1.4.1.21296.1.2.22.26.1.1 | RownotificationStreamEntry | not-accessible | current | Entry of notificationStreamTable |
| 1.3.6.1.4.1.21296.1.2.22.26.1.1.1 | ColumnnotificationStreamName | read-only | current | The name of the event stream. |
| 1.3.6.1.4.1.21296.1.2.22.26.1.1.2 | ColumnnotificationStreamDescription | read-only | current | Description of the event stream. |
| 1.3.6.1.4.1.21296.1.2.22.26.1.1.3 | ColumnnotificationStreamSupportedNotifications | read-only | current | Contains the list of supported notifications.This is originally a YANG leaf-list, here encoded as a comma separated list of values. |
| 1.3.6.1.4.1.21296.1.2.22.26.1.1.4 | ColumnnotificationStreamState | read-only | current | State of the stream (tied with the respective data-model enabled leaf). |
| 1.3.6.1.4.1.21296.1.2.22.27 | NodehighSpeedMonitoring | |||
| 1.3.6.1.4.1.21296.1.2.22.27.1 | ScalarhighSpeedMonitoringEnabled | read-only | current | User configurable switch to enable or disable high speed monitoring. default value :false |
| 1.3.6.1.4.1.21296.1.2.22.27.2 | ScalarhighSpeedMonitoringPort | read-only | current | User configurable port. default value :57500 |
| 1.3.6.1.4.1.21296.1.2.23 | Nodeztp | |||
| 1.3.6.1.4.1.21296.1.2.23.1 | NodeztpInfo | |||
| 1.3.6.1.4.1.21296.1.2.23.1.1 | ScalarztpMode | read-only | current | User set mode of ZTP. This flag is set via change-ztp-mode RPC that is allowed even when NBI is locked. default value :enabled |
| 1.3.6.1.4.1.21296.1.2.23.1.2 | ScalarztpState | read-only | current | Current state of ZTP service default value :ztp-init |
| 1.3.6.1.4.1.21296.1.2.23.1.3 | ScalarztpDetails | read-only | current | The reply will be truncated in 128 bytes. Additional information on the current state |
| 1.3.6.1.4.1.21296.1.2.23.1.4 | ScalarztpCompletionStatus | read-only | current | Summarized completion status of ZTP on the node default value :not-completed |
| 1.3.6.1.4.1.21296.1.2.23.2 | Noderecovery | |||
| 1.3.6.1.4.1.21296.1.2.23.2.1 | ScalarrecoveryRestoreFromChassisStorage | read-only | current | This attribute is only relevant when a chassis storage is available. It allows the operator to control how the system behaves in such cases. When no chassis st… |
| 1.3.6.1.4.1.21296.1.2.23.2.2 | ScalarrecoveryRestoreStatus | read-only | current | Current state of the restoration. default value :init |
| 1.3.6.1.4.1.21296.1.2.23.2.3 | ScalarrecoveryBackupStatus | read-only | current | Current state of the last backup. default value :unknown |
| 1.3.6.1.4.1.21296.1.2.23.2.4 | ScalarrecoveryLastBackup | read-only | current | Timestamp with the last backup performed. default value :never |
| 1.3.6.1.4.1.21296.1.2.23.2.5 | ScalarrecoveryNextBackup | read-only | current | Timestamp with the next backup performed. default value :never |
| 1.3.6.1.4.1.21296.1.2.24 | Nodetransfer | |||
| 1.3.6.1.4.1.21296.1.2.24.1 | NodetransferInfo | |||
| 1.3.6.1.4.1.21296.1.2.24.1.1 | ScalartransferDebugLogOptionalContent | read-only | current | List of keywords associated with optional content to be selected for debug-log upload.This is originally a YANG leaf-list, here encoded as a comma separated li… |
| 1.3.6.1.4.1.21296.1.2.24.1.2 | ScalartransferHttpProxy | read-only | current | The reply will be truncated in 128 bytes. Proxy server for internally-generated HTTP requests leaving the NE. This includes certificate revocation-related requ… |
| 1.3.6.1.4.1.21296.1.2.24.2 | NodetransferStatus | |||
| 1.3.6.1.4.1.21296.1.2.24.2.1 | TabletransferStatusTable | not-accessible | current | Status of the last operation for this filetype. This object will only exist if at least one of the operation of that kind was done for that filetype. |
| 1.3.6.1.4.1.21296.1.2.24.2.1.1 | RowtransferStatusEntry | not-accessible | current | Entry of transferStatusTable |
| 1.3.6.1.4.1.21296.1.2.24.2.1.1.1 | ColumntransferStatusFiletype | read-only | current | File transfer status per filetype. |
| 1.3.6.1.4.1.21296.1.2.24.2.1.1.2 | ColumntransferStatusOperation | read-only | current | Last transfer operation. |
| 1.3.6.1.4.1.21296.1.2.24.2.1.1.3 | ColumntransferStatusLastCompletionStatus | read-only | current | Success indicates a successful operation. |
| 1.3.6.1.4.1.21296.1.2.24.2.1.1.4 | ColumntransferStatusLastTransfer | read-only | current | Last transfer Start Timestamp. |
| 1.3.6.1.4.1.21296.1.2.24.2.1.1.5 | ColumntransferStatusLastDuration | read-only | current | Last transfer duration. |
| 1.3.6.1.4.1.21296.1.2.24.2.1.1.6 | ColumntransferStatusTransferType | read-only | current | Last transfer type. |
| 1.3.6.1.4.1.21296.1.2.24.2.1.1.7 | ColumntransferStatusSessionId | read-only | current | Last transfer session-id. |
| 1.3.6.1.4.1.21296.1.2.24.2.1.1.8 | ColumntransferStatusSessionUserName | read-only | current | Last transfer session-user-name. |
| 1.3.6.1.4.1.21296.1.2.24.2.1.1.9 | ColumntransferStatusFilename | read-only | current | The reply will be truncated in 128 bytes. Last transferred file URL. Filename larger than 512 chars are truncated. |
| 1.3.6.1.4.1.21296.1.2.24.2.1.1.10 | ColumntransferStatusTransferProgress | read-only | current | Completion percentage (0-100 percent). default value :0 |
| 1.3.6.1.4.1.21296.1.2.24.2.1.1.11 | ColumntransferStatusBytesTransferred | read-only | current | Bytes transferred so far. UNITS:bytes default value :0 |
| 1.3.6.1.4.1.21296.1.2.24.2.1.1.12 | ColumntransferStatusTotalBytes | read-only | current | Total file size in bytes. Zero until known at transfer start. UNITS:bytes default value :0 |
| 1.3.6.1.4.1.21296.1.2.24.2.1.1.13 | ColumntransferStatusDetails | read-only | current | The reply will be truncated in 128 bytes. Details of transfer phase, e.g. idle, preparation, transfer, completed. default value :idle |
| 1.3.6.1.4.1.21296.1.2.25 | Nodenetworking | |||
| 1.3.6.1.4.1.21296.1.2.25.1 | NodenetworkingInfo | |||
| 1.3.6.1.4.1.21296.1.2.25.1.1 | ScalarnetworkingUseAsSource | read-only | current | Interface to use as source address |
| 1.3.6.1.4.1.21296.1.2.25.2 | Nodeinterface | |||
| 1.3.6.1.4.1.21296.1.2.25.2.1 | TableinterfaceTable | not-accessible | current | The list of configured interfaces on the device. |
| 1.3.6.1.4.1.21296.1.2.25.2.1.1 | RowinterfaceEntry | not-accessible | current | Entry of interfaceTable |
| 1.3.6.1.4.1.21296.1.2.25.2.1.1.1 | ColumninterfaceIfName | read-only | current | The name of the interface. |
| 1.3.6.1.4.1.21296.1.2.25.2.1.1.2 | ColumninterfaceIfDescription | read-only | current | The reply will be truncated in 128 bytes. A textual description of the interface. |
| 1.3.6.1.4.1.21296.1.2.25.2.1.1.3 | ColumninterfaceIfType | read-only | current | The type of the interface. |
| 1.3.6.1.4.1.21296.1.2.25.2.1.1.4 | ColumninterfaceSupportingPort | read-only | current | Reference to the physical port that interface is currently mapped to. Not relevant for software loopback interfaces. |
| 1.3.6.1.4.1.21296.1.2.25.2.1.1.5 | ColumninterfaceVrf | read-only | current | VRF to which this interface is bound. |
| 1.3.6.1.4.1.21296.1.2.25.2.1.1.6 | ColumninterfaceIpv4Enabled | read-only | current | Controls whether IPv4 is enabled or disabled on this interface. When IPv4 is enabled, this interface is connected to an IPv4 stack, and the interface can send … |
| 1.3.6.1.4.1.21296.1.2.25.2.1.1.7 | ColumninterfaceIpv4AddressAssignmentMethod | read-only | current | IPv4 address assignment method. Conditions:../ipv4-enabled = 'true' default value :static |
| 1.3.6.1.4.1.21296.1.2.25.2.1.1.8 | ColumninterfaceIpv6Enabled | read-only | current | Controls whether IPv6 is enabled or disabled on this interface. When IPv6 is enabled, this interface is connected to an IPv6 stack, and the interface can send … |
| 1.3.6.1.4.1.21296.1.2.25.2.1.1.9 | ColumninterfaceIpv6AddressAssignmentMethod | read-only | current | IPv6 address assignment method. Not relevant for ppp, hdlc and oscx interfaces. Conditions:../ipv6-enabled = 'true' default value :static |
| 1.3.6.1.4.1.21296.1.2.25.2.1.1.10 | ColumninterfaceAdminState | read-only | current | The administrative state of the managed object. Conditions:if-type != 'software-loopback' default value :unlock |
| 1.3.6.1.4.1.21296.1.2.25.2.1.1.11 | ColumninterfaceOperState | read-only | current | The operational state of this object. Conditions:if-type != 'software-loopback' default value :disabled |
| 1.3.6.1.4.1.21296.1.2.25.2.1.1.12 | ColumninterfaceAvailState | read-only | current | Availability state of an entity. Conditions:if-type != 'software-loopback' |
| 1.3.6.1.4.1.21296.1.2.25.2.1.1.13 | ColumninterfaceAlarmReportControl | read-only | current | Controls the reporting of alarms for this particular object. default value :allowed |
| 1.3.6.1.4.1.21296.1.2.25.2.1.1.14 | ColumninterfaceBackupPort | read-only | current | Reference to the physical port that supports this interface (if applicable). Only relevant for ethernet interfaces. |
| 1.3.6.1.4.1.21296.1.2.25.2.1.1.15 | ColumninterfaceProtectionMode | read-only | current | Protection mode for interface. Only relevant for ethernet interfaces. default value :protected |
| 1.3.6.1.4.1.21296.1.2.25.2.1.1.16 | ColumninterfaceProtectionState | read-only | current | Current state of protection of interface. Only relevant for ethernet interfaces. default value :unknown |
| 1.3.6.1.4.1.21296.1.2.25.2.1.1.17 | ColumninterfaceLabel | read-only | current | The reply will be truncated in 128 bytes. User label. |
| 1.3.6.1.4.1.21296.1.2.25.2.1.1.18 | ColumninterfaceProxyArpEnabled | read-only | current | Controls whether or not Proxy ARP is to be enabled on the interface. Not relevant for ppp, hdlc and oscx interfaces. Conditions:../ipv4-enabled = 'true' defaul… |
| 1.3.6.1.4.1.21296.1.2.25.2.1.1.20 | ColumninterfaceMonitoringMode | read-only | current | Monitoring mode for the interface, only applicable for interfaces that support PM collection. default value :unused |
| 1.3.6.1.4.1.21296.1.2.25.3 | Nodeipv4Address | |||
| 1.3.6.1.4.1.21296.1.2.25.3.1 | Tableipv4AddressTable | not-accessible | current | The IPv4 address on the interface. |
| 1.3.6.1.4.1.21296.1.2.25.3.1.1 | Rowipv4AddressEntry | not-accessible | current | Entry of ipv4AddressTable |
| 1.3.6.1.4.1.21296.1.2.25.3.1.1.1 | Columnipv4AddressIp | read-only | current | The IPv4 addresses on the interface. The following addresses are disallowed from being configured: 1. Addresses beginning with 0 (current network) 2. Addresses… |
| 1.3.6.1.4.1.21296.1.2.25.3.1.1.2 | Columnipv4AddressNetmask | read-only | current | The subnet specified as a netmask for a particular address. Only valid netmasks are allowed to be configured. |
| 1.3.6.1.4.1.21296.1.2.25.3.1.1.3 | Columnipv4AddressOrigin | read-only | current | IPv4 address assignment method. default value :static |
| 1.3.6.1.4.1.21296.1.2.25.4 | Nodeipv6Address | |||
| 1.3.6.1.4.1.21296.1.2.25.4.1 | Tableipv6AddressTable | not-accessible | current | The IPv6 address on the interface. |
| 1.3.6.1.4.1.21296.1.2.25.4.1.1 | Rowipv6AddressEntry | not-accessible | current | Entry of ipv6AddressTable |
| 1.3.6.1.4.1.21296.1.2.25.4.1.1.1 | Columnipv6AddressIp | read-only | current | The IPv6 address on the interface |
| 1.3.6.1.4.1.21296.1.2.25.4.1.1.2 | Columnipv6AddressPrefixLength | read-only | current | The length of the subnet prefix. |
| 1.3.6.1.4.1.21296.1.2.25.4.1.1.3 | Columnipv6AddressOrigin | read-only | current | IPv6 address assignment method. default value :static |
| 1.3.6.1.4.1.21296.1.2.25.5 | Nodevrf | |||
| 1.3.6.1.4.1.21296.1.2.25.5.1 | TablevrfTable | not-accessible | current | Virtual Routing and Forwarding instance. |
| 1.3.6.1.4.1.21296.1.2.25.5.1.1 | RowvrfEntry | not-accessible | current | Entry of vrfTable |
| 1.3.6.1.4.1.21296.1.2.25.5.1.1.1 | ColumnvrfName | read-only | current | Name of the VRF. |
| 1.3.6.1.4.1.21296.1.2.25.5.1.1.2 | ColumnvrfType | read-only | current | VRF type. |
| 1.3.6.1.4.1.21296.1.2.25.5.1.1.3 | ColumnvrfChassisName | read-only | current | Associated chassis name to this VRF. |
| 1.3.6.1.4.1.21296.1.2.25.5.1.1.4 | ColumnvrfDescription | read-only | current | The reply will be truncated in 128 bytes. Description of the VRF and its intended purpose. |
| 1.3.6.1.4.1.21296.1.2.25.7 | Nodeipv4StaticRoute | |||
| 1.3.6.1.4.1.21296.1.2.25.7.1 | Tableipv4StaticRouteTable | not-accessible | current | A list of IPv4 static routes. |
| 1.3.6.1.4.1.21296.1.2.25.7.1.1 | Rowipv4StaticRouteEntry | not-accessible | current | Entry of ipv4StaticRouteTable |
| 1.3.6.1.4.1.21296.1.2.25.7.1.1.1 | Columnipv4StaticRouteIpv4DestinationPrefix | read-only | current | IPv4 destination prefix. |
| 1.3.6.1.4.1.21296.1.2.25.7.1.1.2 | Columnipv4StaticRouteAdvertised | read-only | current | When set to YES, the static route is advertised in the routing protocol. For OSPF, the static route will be advertised as an AS external route, if OSPF is conf… |
| 1.3.6.1.4.1.21296.1.2.25.7.1.1.3 | Columnipv4StaticRouteNextHopAddress | read-only | current | IPv4 address of the next-hop. |
| 1.3.6.1.4.1.21296.1.2.25.7.1.1.4 | Columnipv4StaticRouteVrf | read-only | current | VRF associated with this static route. |
| 1.3.6.1.4.1.21296.1.2.25.7.1.1.5 | Columnipv4StaticRouteDistance | read-only | current | distance of the next-hop. default value :1 |
| 1.3.6.1.4.1.21296.1.2.25.7.1.1.6 | Columnipv4StaticRouteInterface | read-only | current | Interface associated with this static route. The VRF bound to this interface needs to match the static-route provided vrf. |
| 1.3.6.1.4.1.21296.1.2.25.7.1.1.7 | Columnipv4StaticRouteOrigin | read-only | current | Route address assignment method. default value :manual |
| 1.3.6.1.4.1.21296.1.2.25.7.1.1.8 | Columnipv4StaticRouteMonitoringState | read-only | current | The current state of the monitoring. default value :unmonitored |
| 1.3.6.1.4.1.21296.1.2.25.7.1.1.9 | Columnipv4StaticRouteMonitoringInstance | read-only | current | Monitoring instance name, applicable only if this route is being monitored. |
| 1.3.6.1.4.1.21296.1.2.25.7.1.1.10 | Columnipv4StaticRouteLabel | read-only | current | The reply will be truncated in 128 bytes. User label. |
| 1.3.6.1.4.1.21296.1.2.25.7.1.1.11 | Columnipv4StaticRouteSpecialNextHop | read-only | current | Indicates the special-next-hop applicable to a route. default value :none |
| 1.3.6.1.4.1.21296.1.2.25.8 | Nodeipv6StaticRoute | |||
| 1.3.6.1.4.1.21296.1.2.25.8.1 | Tableipv6StaticRouteTable | not-accessible | current | A list of IPv6 static routes. |
| 1.3.6.1.4.1.21296.1.2.25.8.1.1 | Rowipv6StaticRouteEntry | not-accessible | current | Entry of ipv6StaticRouteTable |
| 1.3.6.1.4.1.21296.1.2.25.8.1.1.1 | Columnipv6StaticRouteIpv6DestinationPrefix | read-only | current | IPv6 destination prefix. |
| 1.3.6.1.4.1.21296.1.2.25.8.1.1.2 | Columnipv6StaticRouteVrf | read-only | current | VRF associated with this static route. |
| 1.3.6.1.4.1.21296.1.2.25.8.1.1.3 | Columnipv6StaticRouteAdvertised | read-only | current | When set to YES, the static route is advertised in the routing protocol. For OSPF, the static route will be advertised as an AS external route, if OSPF is conf… |
| 1.3.6.1.4.1.21296.1.2.25.8.1.1.4 | Columnipv6StaticRouteNextHopAddress | read-only | current | IPv6 address of the next-hop. |
| 1.3.6.1.4.1.21296.1.2.25.8.1.1.5 | Columnipv6StaticRouteDistance | read-only | current | distance of the next-hop. default value :1 |
| 1.3.6.1.4.1.21296.1.2.25.8.1.1.6 | Columnipv6StaticRouteInterface | read-only | current | Interface associated with this static route. The VRF bound to this interface needs to match the static-route provided vrf. |
| 1.3.6.1.4.1.21296.1.2.25.8.1.1.7 | Columnipv6StaticRouteOrigin | read-only | current | route address assignment method. default value :manual |
| 1.3.6.1.4.1.21296.1.2.25.8.1.1.8 | Columnipv6StaticRouteMonitoringState | read-only | current | The current state of the monitoring default value :unmonitored |
| 1.3.6.1.4.1.21296.1.2.25.8.1.1.9 | Columnipv6StaticRouteMonitoringInstance | read-only | current | Monitoring Instance Name. |
| 1.3.6.1.4.1.21296.1.2.25.8.1.1.10 | Columnipv6StaticRouteLabel | read-only | current | The reply will be truncated in 128 bytes. User label. |
| 1.3.6.1.4.1.21296.1.2.25.8.1.1.11 | Columnipv6StaticRouteSpecialNextHop | read-only | current | Indicates the special-next-hop applicable to a route. default value :none |
| 1.3.6.1.4.1.21296.1.2.25.9 | NodeospfInstance | |||
| 1.3.6.1.4.1.21296.1.2.25.9.1 | TableospfInstanceTable | not-accessible | current | OSPF protocol instances. |
| 1.3.6.1.4.1.21296.1.2.25.9.1.1 | RowospfInstanceEntry | not-accessible | current | Entry of ospfInstanceTable |
| 1.3.6.1.4.1.21296.1.2.25.9.1.1.1 | ColumnospfInstanceRouterId | read-only | current | OSPF Router ID. Conditions:../router-id-mode = 'manual' |
| 1.3.6.1.4.1.21296.1.2.25.9.1.1.2 | ColumnospfInstanceInstanceId | read-only | current | OSPF instance ID. |
| 1.3.6.1.4.1.21296.1.2.25.9.1.1.3 | ColumnospfInstanceVersion | read-only | current | OSPF version v2 or v3 default value :ospfv2 |
| 1.3.6.1.4.1.21296.1.2.25.9.1.1.4 | ColumnospfInstanceDescription | read-only | current | Textual description of the OSPF instance. |
| 1.3.6.1.4.1.21296.1.2.25.9.1.1.5 | ColumnospfInstanceVrf | read-only | current | VRF associated with this OSPF instance. |
| 1.3.6.1.4.1.21296.1.2.25.9.1.1.6 | ColumnospfInstanceRouterIdMode | read-only | current | Flag to indicate router-id is loopback IP or manual configured. default value :use-loopback |
| 1.3.6.1.4.1.21296.1.2.25.9.1.1.7 | ColumnospfInstanceMaxOspfInterfaces | read-only | current | Maximum number of OSPF interfaces supported in this ospf-instance. default value :250 |
| 1.3.6.1.4.1.21296.1.2.25.9.1.1.8 | ColumnospfInstanceTotalOspfInterfaces | read-only | current | Existing number of OSPF interfaces in this ospf-instance. |
| 1.3.6.1.4.1.21296.1.2.25.10 | NodeospfArea | |||
| 1.3.6.1.4.1.21296.1.2.25.10.1 | TableospfAreaTable | not-accessible | current | Configuration of ospf area. |
| 1.3.6.1.4.1.21296.1.2.25.10.1.1 | RowospfAreaEntry | not-accessible | current | Entry of ospfAreaTable |
| 1.3.6.1.4.1.21296.1.2.25.10.1.1.1 | ColumnospfAreaId | read-only | current | OSPF Router Area ID. |
| 1.3.6.1.4.1.21296.1.2.25.10.1.1.2 | ColumnospfAreaType | read-only | current | OSPF Router Area Type. default value :normal |
| 1.3.6.1.4.1.21296.1.2.25.11 | NodeospfAreaRange | |||
| 1.3.6.1.4.1.21296.1.2.25.11.1 | TableospfAreaRangeTable | not-accessible | current | Summarize routes matching address/mask - Applicable to Area Border Routers (ABRs) only. |
| 1.3.6.1.4.1.21296.1.2.25.11.1.1 | RowospfAreaRangeEntry | not-accessible | current | Entry of ospfAreaRangeTable |
| 1.3.6.1.4.1.21296.1.2.25.11.1.1.1 | ColumnospfAreaRangePrefix | read-only | current | IPv4 or IPv6 prefix |
| 1.3.6.1.4.1.21296.1.2.25.11.1.1.2 | ColumnospfAreaRangeAdvertise | read-only | current | Advertise or hide. default value :true |
| 1.3.6.1.4.1.21296.1.2.25.12 | NodeospfInterface | |||
| 1.3.6.1.4.1.21296.1.2.25.12.1 | TableospfInterfaceTable | not-accessible | current | Configuration of interface in an ospf area. |
| 1.3.6.1.4.1.21296.1.2.25.12.1.1 | RowospfInterfaceEntry | not-accessible | current | Entry of ospfInterfaceTable |
| 1.3.6.1.4.1.21296.1.2.25.12.1.1.1 | ColumnospfInterfaceOspfIfName | read-only | current | Reference of the interface in OSPF area. |
| 1.3.6.1.4.1.21296.1.2.25.12.1.1.2 | ColumnospfInterfaceOspfIfRouting | read-only | current | Specifies if routing is enabled and if so, if Routing is passive or active. default value :auto |
| 1.3.6.1.4.1.21296.1.2.25.12.1.1.3 | ColumnospfInterfaceEnable | read-only | current | Enable/disable OSPF protocol on the interface. Conditions:(ospf-if-routing != 'passive') and (ospf-if-name != 'LO-MGMT') default value :true |
| 1.3.6.1.4.1.21296.1.2.25.12.1.1.4 | ColumnospfInterfaceHelloInterval | read-only | current | Specifies the Hello Interval in seconds. Conditions:(ospf-if-routing != 'passive') and (ospf-if-name != 'LO-MGMT') UNITS:seconds default value :10 |
| 1.3.6.1.4.1.21296.1.2.25.12.1.1.5 | ColumnospfInterfaceRouterDeadInterval | read-only | current | Specifies the Router Dead Interval in seconds. Conditions:(ospf-if-routing != 'passive') and (ospf-if-name != 'LO-MGMT') UNITS:seconds default value :40 |
| 1.3.6.1.4.1.21296.1.2.25.12.1.1.6 | ColumnospfInterfaceRetransmissionInterval | read-only | current | Specifies the Retransmission Interval in seconds. Conditions:(ospf-if-routing != 'passive') and (ospf-if-name != 'LO-MGMT') UNITS:seconds default value :5 |
| 1.3.6.1.4.1.21296.1.2.25.12.1.1.7 | ColumnospfInterfaceTransmitDelay | read-only | current | Estimated time needed to transmit Link State Update (LSU) packets on the interface (seconds). LSAs have their age incremented by this amount when advertised on… |
| 1.3.6.1.4.1.21296.1.2.25.12.1.1.8 | ColumnospfInterfaceOspfCost | read-only | current | OSPF link cost. Conditions:(ospf-if-routing != 'passive') and (ospf-if-name != 'LO-MGMT') default value :10 |
| 1.3.6.1.4.1.21296.1.2.25.12.1.1.9 | ColumnospfInterfaceOspfNetworkType | read-only | current | OSPF Interface Network Types. Conditions:(ospf-if-routing != 'passive') and (ospf-if-name != 'LO-MGMT') default value :broadcast |
| 1.3.6.1.4.1.21296.1.2.25.12.1.1.10 | ColumnospfInterfacePriority | read-only | current | Configure OSPF router priority. On multi-access network this value is for Designated Router (DR) election. The priority is ignored on other interface types. A … |
| 1.3.6.1.4.1.21296.1.2.25.12.1.1.11 | ColumnospfInterfaceOspfAuthEnable | read-only | current | Enable/Disable Authentication. Only of relevance for ospfv2 or ospfv3. Conditions:((../../version = 'ospfv2') or (../../version = 'ospfv3')) and (ospf-if-name … |
| 1.3.6.1.4.1.21296.1.2.25.12.1.1.12 | ColumnospfInterfaceOspfAuthAlgorithm | read-only | current | Cryptographic algorithm associated with key. Only of relevance for ospfv2. Conditions:((../../version = 'ospfv2') or (../../version = 'ospfv3')) and (ospf-if-n… |
| 1.3.6.1.4.1.21296.1.2.25.12.1.1.13 | ColumnospfInterfaceOspfAuthKey | read-only | current | The reply will be truncated in 128 bytes. Authentication key string in ASCII format. Only of relevance for ospfv2. Conditions:((../../version = 'ospfv2') or (.… |
| 1.3.6.1.4.1.21296.1.2.25.14 | Nodeacl | |||
| 1.3.6.1.4.1.21296.1.2.25.14.1 | TableaclTable | not-accessible | current | Set of attributes associated with every access control list (ACL). An ACL can have one or more ACEs. |
| 1.3.6.1.4.1.21296.1.2.25.14.1.1 | RowaclEntry | not-accessible | current | Entry of aclTable |
| 1.3.6.1.4.1.21296.1.2.25.14.1.1.1 | ColumnaclName | read-only | current | Name of the ACL. |
| 1.3.6.1.4.1.21296.1.2.25.14.1.1.2 | ColumnaclAdminState | read-only | current | The administrative state of the managed object. default value :unlock |
| 1.3.6.1.4.1.21296.1.2.25.14.1.1.3 | ColumnaclOperState | read-only | current | The operational state of this object. default value :disabled |
| 1.3.6.1.4.1.21296.1.2.25.14.1.1.4 | ColumnaclAvailState | read-only | current | Availability state of an entity. |
| 1.3.6.1.4.1.21296.1.2.25.14.1.1.5 | ColumnaclType | read-only | current | Indicates the top-level type of ACL, i.e., what fields from the associated IPv4 or IPv6 headers this ACL matches on. |
| 1.3.6.1.4.1.21296.1.2.25.14.1.1.6 | ColumnaclInterface | read-only | current | A reference to the interface this filter shall be applied to. |
| 1.3.6.1.4.1.21296.1.2.25.15 | Nodeace | |||
| 1.3.6.1.4.1.21296.1.2.25.15.1 | TableaceTable | not-accessible | current | Attributes pertaining to an access control entry (ACE). Every ACL can have one or more ACEs. |
| 1.3.6.1.4.1.21296.1.2.25.15.1.1 | RowaceEntry | not-accessible | current | Entry of aceTable |
| 1.3.6.1.4.1.21296.1.2.25.15.1.1.1 | ColumnaceSequenceId | read-only | current | Sequence number that establishes the relative order of the ACE within an ACL |
| 1.3.6.1.4.1.21296.1.2.25.15.1.1.2 | ColumnaceLabel | read-only | current | The reply will be truncated in 128 bytes. Name of the IP Filter |
| 1.3.6.1.4.1.21296.1.2.25.15.1.1.3 | ColumnaceDirection | read-only | current | Based on the direction, this filter shall be applied to incoming packets, or outgoing packets. Note that Input is mandatory and output is an optional function.… |
| 1.3.6.1.4.1.21296.1.2.25.15.1.1.4 | ColumnaceLoggingAction | read-only | current | Flag to indicate if logging needs to be done once the ACE rule is matched. default value :false |
| 1.3.6.1.4.1.21296.1.2.25.15.1.1.5 | ColumnaceSourceIpAddress | read-only | current | Specifies the source IP of this filter. The values could be a valid IPv4/v6-address or Ipv4/v6-address/prefix. default value :any |
| 1.3.6.1.4.1.21296.1.2.25.15.1.1.6 | ColumnaceSourceLowerPort | read-only | current | The lower bound on the source Layer 4 TCP/UDP port number. A value of zero for both indicates wildcarding. Conditions:../protocol != 'icmp' default value :0 |
| 1.3.6.1.4.1.21296.1.2.25.15.1.1.7 | ColumnaceSourceUpperPort | read-only | current | The upper bound on the source Layer 4 TCP/UDP port number. A value of zero for both indicates wildcarding. Conditions:../protocol != 'icmp' default value :0 |
| 1.3.6.1.4.1.21296.1.2.25.15.1.1.8 | ColumnaceDestinationIpAddress | read-only | current | Specifies the destination IP of this filter. The values could be a valid IPv4/v6-address or Ipv4/v6-address/prefix. default value :any |
| 1.3.6.1.4.1.21296.1.2.25.15.1.1.9 | ColumnaceDestinationLowerPort | read-only | current | The lower bound on the destination Layer 4 TCP/UDP port number. A value of zero for both indicates wildcarding. Conditions:../protocol != 'icmp' default value … |
| 1.3.6.1.4.1.21296.1.2.25.15.1.1.10 | ColumnaceDestinationUpperPort | read-only | current | The upper bound on the destination Layer 4 TCP/UDP port number. A value of zero for both indicates wildcarding. Conditions:../protocol != 'icmp' default value … |
| 1.3.6.1.4.1.21296.1.2.25.15.1.1.11 | ColumnaceTtl | read-only | current | IPv4 and IPv6 packet's time-to-live (TTL) hop limit. Default TTL value 255 is max hop default value :any |
| 1.3.6.1.4.1.21296.1.2.25.15.1.1.12 | ColumnaceAction | read-only | current | The action to be taken by the filter. default value :drop |
| 1.3.6.1.4.1.21296.1.2.25.15.1.1.13 | ColumnaceProtocol | read-only | current | Internet Protocol number. Refers to the protocol payload. In IPv6, this field is known as 'next-header', and if extension headers are present, the protocol is … |
| 1.3.6.1.4.1.21296.1.2.25.16 | Nodedns | |||
| 1.3.6.1.4.1.21296.1.2.25.16.1 | ScalardnsEnabled | read-only | current | Whether DNS is enabled. default value :true |
| 1.3.6.1.4.1.21296.1.2.25.16.2 | ScalardnsSearch | read-only | current | DNS-search-suffix name, should contain atleast single dot. To clear value, set to empty string. |
| 1.3.6.1.4.1.21296.1.2.25.16.3 | ScalardnsAssignmentMethod | read-only | current | The system would contain manual and dhcp configured values. System can use those onfigurations/values defined by assignment-method attributes. default value :b… |
| 1.3.6.1.4.1.21296.1.2.25.17 | NodednsServer | |||
| 1.3.6.1.4.1.21296.1.2.25.17.1 | TablednsServerTable | not-accessible | current | DNS server configuration. |
| 1.3.6.1.4.1.21296.1.2.25.17.1.1 | RowdnsServerEntry | not-accessible | current | Entry of dnsServerTable |
| 1.3.6.1.4.1.21296.1.2.25.17.1.1.1 | ColumndnsServerAddress | read-only | current | DNS address. |
| 1.3.6.1.4.1.21296.1.2.25.17.1.1.2 | ColumndnsServerOrigin | read-only | current | DNS address assignment method, user can convert DHCP configured DNS entry into a manual configured by changing this attribute. |
| 1.3.6.1.4.1.21296.1.2.25.18 | Nodeospfv3IpsecSecurityAssociation | |||
| 1.3.6.1.4.1.21296.1.2.25.18.1 | Tableospfv3IpsecSecurityAssociationTable | not-accessible | current | A list of SAs created to protect OSPFv3 traffic. NOTE that in ThanOS, we will always create both INBOUND and OUTBOUND SAs automatically (i.e., for one user-cre… |
| 1.3.6.1.4.1.21296.1.2.25.18.1.1 | Rowospfv3IpsecSecurityAssociationEntry | not-accessible | current | Entry of ospfv3IpsecSecurityAssociationTable |
| 1.3.6.1.4.1.21296.1.2.25.18.1.1.1 | Columnospfv3IpsecSecurityAssociationSpi | read-only | current | A unique security parameter index (SPI) for this SA. |
| 1.3.6.1.4.1.21296.1.2.25.18.1.1.2 | Columnospfv3IpsecSecurityAssociationIpsecProtocol | read-only | current | Indicates the use of ESP or AH protocols. default value :ESP |
| 1.3.6.1.4.1.21296.1.2.25.18.1.1.3 | Columnospfv3IpsecSecurityAssociationIpsecMode | read-only | current | Indicates IPsec mode. Only transport mode is supported in the initial releases. default value :transport |
| 1.3.6.1.4.1.21296.1.2.25.18.1.1.4 | Columnospfv3IpsecSecurityAssociationIntegrityAlgorithm | read-only | current | The cryptographic algorithm used to perform IPsec integrity protection. |
| 1.3.6.1.4.1.21296.1.2.25.19 | NodeauthKey | |||
| 1.3.6.1.4.1.21296.1.2.25.19.1 | TableauthKeyTable | not-accessible | current | NULL |
| 1.3.6.1.4.1.21296.1.2.25.19.1.1 | RowauthKeyEntry | not-accessible | current | Entry of authKeyTable |
| 1.3.6.1.4.1.21296.1.2.25.19.1.1.1 | ColumnauthKeyType | read-only | current | Indicates whether the integrity key is ASCII or hexadecimal encoded. default value :ascii |
| 1.3.6.1.4.1.21296.1.2.25.19.1.1.2 | ColumnauthKeyKey | read-only | current | The reply will be truncated in 128 bytes. The pre-shared key for OSPFv3 IPsec integrity protection. The valid key length range for ascii format is 8..128 and f… |
| 1.3.6.1.4.1.21296.1.2.25.20 | NodeipMonitoring | |||
| 1.3.6.1.4.1.21296.1.2.25.20.1 | TableipMonitoringTable | not-accessible | current | Monitoring instance configuration and state. A monitoring instance allows to periodically ping certain destinations whose result takes action on configured sta… |
| 1.3.6.1.4.1.21296.1.2.25.20.1.1 | RowipMonitoringEntry | not-accessible | current | Entry of ipMonitoringTable |
| 1.3.6.1.4.1.21296.1.2.25.20.1.1.1 | ColumnipMonitoringName | read-only | current | Name of the monitoring instance. |
| 1.3.6.1.4.1.21296.1.2.25.20.1.1.2 | ColumnipMonitoringProbeInterval | read-only | current | The time between two consecutive pings in seconds UNITS:seconds default value :5 |
| 1.3.6.1.4.1.21296.1.2.25.20.1.1.3 | ColumnipMonitoringDestination | read-only | current | The remote host to monitor. |
| 1.3.6.1.4.1.21296.1.2.25.20.1.1.4 | ColumnipMonitoringDropRate | read-only | current | The accepted drop rate of ping in 10% steps default value :1 |
| 1.3.6.1.4.1.21296.1.2.25.20.1.1.5 | ColumnipMonitoringEnabled | read-only | current | Start or Stop the monitoring of the destination by setting to true or false. default value :true |
| 1.3.6.1.4.1.21296.1.2.25.20.1.1.6 | ColumnipMonitoringMonitoringState | read-only | current | The current state of the monitoring. default value :unknown |
| 1.3.6.1.4.1.21296.1.2.25.20.1.1.7 | ColumnipMonitoringAction | read-only | current | The action to take when the monitoring goes into 'failed' state. default value :withdraw |
| 1.3.6.1.4.1.21296.1.2.25.20.1.1.8 | ColumnipMonitoringStaticRoute | read-only | current | The list of connected static routes for this Monitoring instance.This is originally a YANG leaf-list, here encoded as a comma separated list of values. |
| 1.3.6.1.4.1.21296.1.2.25.20.1.1.9 | ColumnipMonitoringNextHop | read-only | current | Defines the exit interface to use which can be ipv4/ipv6 source ip address or interface name or empty. The monitoring instance will not be active until the exi… |
| 1.3.6.1.4.1.21296.1.2.25.20.1.1.10 | ColumnipMonitoringAlarmReportControl | read-only | current | Controls the reporting of alarms for this particular object. default value :allowed |
| 1.3.6.1.4.1.21296.1.2.25.21 | Noderib | |||
| 1.3.6.1.4.1.21296.1.2.25.21.1 | TableribTable | not-accessible | current | Each entry represents a RIB identified by the 'name' key. All routes in a RIB belong to the same address family. For each routing instance, the system will pro… |
| 1.3.6.1.4.1.21296.1.2.25.21.1.1 | RowribEntry | not-accessible | current | Entry of ribTable |
| 1.3.6.1.4.1.21296.1.2.25.21.1.1.1 | ColumnribName | read-only | current | The name of the RIB. |
| 1.3.6.1.4.1.21296.1.2.25.21.1.1.2 | ColumnribVrf | read-only | current | VRF to which this RIB is bound. |
| 1.3.6.1.4.1.21296.1.2.25.21.1.1.3 | ColumnribAddressFamily | read-only | current | Address family. default value :ipv4-unicast |
| 1.3.6.1.4.1.21296.1.2.25.22 | Noderoute | |||
| 1.3.6.1.4.1.21296.1.2.25.22.1 | TablerouteTable | not-accessible | current | A list of system routes from various source, such as dynamic protocols and static route. |
| 1.3.6.1.4.1.21296.1.2.25.22.1.1 | RowrouteEntry | not-accessible | current | Entry of routeTable |
| 1.3.6.1.4.1.21296.1.2.25.22.1.1.1 | ColumnrouteDestinationPrefix | read-only | current | IP destination prefix. |
| 1.3.6.1.4.1.21296.1.2.25.22.1.1.2 | ColumnrouteSpecialNextHop | read-only | current | Indicates the special-next-hop applicable to a route. default value :none |
| 1.3.6.1.4.1.21296.1.2.25.22.1.1.3 | ColumnrouteSourceProtocol | read-only | current | Source protocol for the route entry. |
| 1.3.6.1.4.1.21296.1.2.25.24 | NodenextHop | |||
| 1.3.6.1.4.1.21296.1.2.25.24.1 | TablenextHopTable | not-accessible | current | Next-hop of a route item. |
| 1.3.6.1.4.1.21296.1.2.25.24.1.1 | RownextHopEntry | not-accessible | current | Entry of nextHopTable |
| 1.3.6.1.4.1.21296.1.2.25.24.1.1.1 | ColumnnextHopInterface | read-only | current | Reference of the outgoing interface. |
| 1.3.6.1.4.1.21296.1.2.25.24.1.1.2 | ColumnnextHopAddress | read-only | current | IP address of the next-hop. |
| 1.3.6.1.4.1.21296.1.2.25.26 | NodebgpInstance | |||
| 1.3.6.1.4.1.21296.1.2.25.26.1 | TablebgpInstanceTable | not-accessible | current | BGP protocol instances. |
| 1.3.6.1.4.1.21296.1.2.25.26.1.1 | RowbgpInstanceEntry | not-accessible | current | Entry of bgpInstanceTable |
| 1.3.6.1.4.1.21296.1.2.25.26.1.1.1 | ColumnbgpInstanceInstanceId | read-only | current | BGP instance ID. |
| 1.3.6.1.4.1.21296.1.2.25.26.1.1.2 | ColumnbgpInstanceDescription | read-only | current | Textual description of the BGP instance. |
| 1.3.6.1.4.1.21296.1.2.25.26.1.1.3 | ColumnbgpInstanceVrf | read-only | current | VRF associated with this BGP instance. |
| 1.3.6.1.4.1.21296.1.2.25.26.1.1.4 | ColumnbgpInstanceLocalAs | read-only | current | The local autonomous system number that is to be used when establishing sessions with the remote peer or peer group. |
| 1.3.6.1.4.1.21296.1.2.25.26.1.1.5 | ColumnbgpInstanceRouterIdMode | read-only | current | Flag to indicate router-id is from loopback interface or manually assigned. default value :use-loopback |
| 1.3.6.1.4.1.21296.1.2.25.26.1.1.6 | ColumnbgpInstanceRouterId | read-only | current | BGP Router ID. Conditions:../router-id-mode = 'manual' |
| 1.3.6.1.4.1.21296.1.2.25.27 | NodebgpNeighbor | |||
| 1.3.6.1.4.1.21296.1.2.25.27.1 | TablebgpNeighborTable | not-accessible | current | List of BGP neighbors configured on the local system, uniquely identified by peer IPv4 address. |
| 1.3.6.1.4.1.21296.1.2.25.27.1.1 | RowbgpNeighborEntry | not-accessible | current | Entry of bgpNeighborTable |
| 1.3.6.1.4.1.21296.1.2.25.27.1.1.1 | ColumnbgpNeighborRemoteAddress | read-only | current | Address of the BGP peer. |
| 1.3.6.1.4.1.21296.1.2.25.27.1.1.2 | ColumnbgpNeighborEnabled | read-only | current | Whether the BGP peer is enabled. In cases where the enabled leaf is set to false, the local system should not initiate connections to the neighbor, and should … |
| 1.3.6.1.4.1.21296.1.2.25.27.1.1.3 | ColumnbgpNeighborPeerAs | read-only | current | AS number of the peer. |
| 1.3.6.1.4.1.21296.1.2.25.27.1.1.4 | ColumnbgpNeighborDescription | read-only | current | An optional textual description (intended primarily for use with a peer or group. |
| 1.3.6.1.4.1.21296.1.2.25.27.1.1.5 | ColumnbgpNeighborSecureSession | read-only | current | Authentication method of the session to the peer. default value :none |
| 1.3.6.1.4.1.21296.1.2.25.27.1.1.6 | ColumnbgpNeighborPassword | read-only | current | Password as TCP-MD5 authentication key in ASCII format. |
| 1.3.6.1.4.1.21296.1.2.25.27.1.1.7 | ColumnbgpNeighborConnectRetryInterval | read-only | current | Time interval in seconds between attempts to establish a session with the peer. UNITS:seconds default value :120 |
| 1.3.6.1.4.1.21296.1.2.25.27.1.1.8 | ColumnbgpNeighborHoldTime | read-only | current | Time interval in seconds that a BGP session will be considered active in the absence of keepalive or other messages from the peer. The hold-time is typically s… |
| 1.3.6.1.4.1.21296.1.2.25.27.1.1.9 | ColumnbgpNeighborKeepaliveInterval | read-only | current | Time interval in seconds between transmission of keepalive messages to the neighbor. Typically set to 1/3 the hold-time. UNITS:seconds default value :30 |
| 1.3.6.1.4.1.21296.1.2.25.27.1.1.10 | ColumnbgpNeighborNegotiatedHoldTime | read-only | current | Negotiated hold time between two BGP neighbors. UNITS:seconds default value :0 |
| 1.3.6.1.4.1.21296.1.2.25.27.1.1.11 | ColumnbgpNeighborSessionState | read-only | current | Current BGP Session state in ASCII format. default value :Idle |
| 1.3.6.1.4.1.21296.1.2.25.27.1.1.12 | ColumnbgpNeighborKnownErrors | read-only | current | The reply will be truncated in 128 bytes. Current BGP Session state errors if any ASCII format. |
| 1.3.6.1.4.1.21296.1.2.25.27.1.1.14 | ColumnbgpNeighborAfiSafis | read-only | current | List of AFI/SAFI values used for BGP configuration.This is originally a YANG leaf-list, here encoded as a comma separated list of values. |
| 1.3.6.1.4.1.21296.1.2.25.30 | NodenwXconnect | |||
| 1.3.6.1.4.1.21296.1.2.25.30.1 | TablenwXconnectTable | not-accessible | current | List of all the network cross connect services that are currently provisioned in the system. |
| 1.3.6.1.4.1.21296.1.2.25.30.1.1 | RownwXconnectEntry | not-accessible | current | Entry of nwXconnectTable |
| 1.3.6.1.4.1.21296.1.2.25.30.1.1.1 | ColumnnwXconnectName | read-only | current | A user configured name for the XCON. |
| 1.3.6.1.4.1.21296.1.2.25.30.1.1.2 | ColumnnwXconnectAID | read-only | current | Resource Access Identifier (AID). Identifies an instance within a specific resource type. |
| 1.3.6.1.4.1.21296.1.2.25.30.1.1.3 | ColumnnwXconnectOperState | read-only | current | The operational state of this object. default value :disabled |
| 1.3.6.1.4.1.21296.1.2.25.30.1.1.4 | ColumnnwXconnectAvailState | read-only | current | Availability state of an entity. |
| 1.3.6.1.4.1.21296.1.2.25.30.1.1.5 | ColumnnwXconnectEndpoint1 | read-only | current | The end-point1 on which the network-xcon needs to be created. |
| 1.3.6.1.4.1.21296.1.2.25.30.1.1.6 | ColumnnwXconnectEndpoint2 | read-only | current | The end-point2 on which the network-xcon needs to be created. |
| 1.3.6.1.4.1.21296.1.2.25.30.1.1.7 | ColumnnwXconnectXconType | read-only | current | The xcon type of this object. |
| 1.3.6.1.4.1.21296.1.2.25.30.1.1.8 | ColumnnwXconnectRate | read-only | current | Maximum bandwidth rate of the user channel. UNITS:Mbps |
| 1.3.6.1.4.1.21296.1.2.25.30.1.1.9 | ColumnnwXconnectOperationalRate | read-only | current | Operational-rate of the user channel. UNITS:Mbps |
| 1.3.6.1.4.1.21296.1.2.25.31 | NodebgpNetwork | |||
| 1.3.6.1.4.1.21296.1.2.25.31.1 | TablebgpNetworkTable | not-accessible | current | It advertises (injects) the specified network prefix into the BGP. This route must exist in the forwarding table installed by an IGP (ospf, static). |
| 1.3.6.1.4.1.21296.1.2.25.31.1.1 | RowbgpNetworkEntry | not-accessible | current | Entry of bgpNetworkTable |
| 1.3.6.1.4.1.21296.1.2.25.31.1.1.1 | ColumnbgpNetworkNetworkPrefix | read-only | current | A route item (dynamic or static) in the route table (FIB) will be advertised to eBGP only if there is network-prefix provisioned under the bgp-network. |
| 1.3.6.1.4.1.21296.1.2.25.32 | NodedhcpRelay | |||
| 1.3.6.1.4.1.21296.1.2.25.32.1 | ScalardhcpRelayMode | read-only | current | Whether DHCP Relay is enabled. default value :disabled |
| 1.3.6.1.4.1.21296.1.2.25.32.2 | ScalardhcpRelayServerAddress | read-only | current | DHCP server ip-addresses when enabled at least one ip-Address should be configured.This is originally a YANG leaf-list, here encoded as a comma separated list … |
| 1.3.6.1.4.1.21296.1.2.25.33 | NodeospfNeighbor | |||
| 1.3.6.1.4.1.21296.1.2.25.33.1 | TableospfNeighborTable | not-accessible | current | List of ospf neighbors uniquely identified by router-id. |
| 1.3.6.1.4.1.21296.1.2.25.33.1.1 | RowospfNeighborEntry | not-accessible | current | Entry of ospfNeighborTable |
| 1.3.6.1.4.1.21296.1.2.25.33.1.1.1 | ColumnospfNeighborRouterId | read-only | current | OSPF Neighbor Router ID. |
| 1.3.6.1.4.1.21296.1.2.25.33.1.1.2 | ColumnospfNeighborState | read-only | current | OSPF neighbor states. |
| 1.3.6.1.4.1.21296.1.2.25.33.1.1.3 | ColumnospfNeighborRole | read-only | current | OSPF router role. |
| 1.3.6.1.4.1.21296.1.2.25.33.1.1.4 | ColumnospfNeighborAddress | read-only | current | OSPF Neighbor Address. |
| 1.3.6.1.4.1.21296.1.2.25.33.1.1.5 | ColumnospfNeighborPriority | read-only | current | OSPF router priority. On multi-access network this value is for Designated Router (DR) election. The priority is ignored on other interface types. A router wit… |
| 1.3.6.1.4.1.21296.1.2.25.34 | Nodel2Bridge | |||
| 1.3.6.1.4.1.21296.1.2.25.34.1 | Tablel2BridgeTable | not-accessible | current | Bridge based on OS Linux, currently only support 1 |
| 1.3.6.1.4.1.21296.1.2.25.34.1.1 | Rowl2BridgeEntry | not-accessible | current | Entry of l2BridgeTable |
| 1.3.6.1.4.1.21296.1.2.25.34.1.1.1 | Columnl2BridgeBridgeName | read-only | current | The name of the bridge. |
| 1.3.6.1.4.1.21296.1.2.25.34.1.1.2 | Columnl2BridgeChassisName | read-only | current | Associated chassis name to this L2 bridge. |
| 1.3.6.1.4.1.21296.1.2.25.34.1.1.3 | Columnl2BridgeDescription | read-only | current | The reply will be truncated in 128 bytes. Description of the bridge and its intended purpose. |
| 1.3.6.1.4.1.21296.1.2.25.35 | NodemplsNexthop | |||
| 1.3.6.1.4.1.21296.1.2.25.35.1 | TablemplsNexthopTable | not-accessible | current | Configuration of MPLS nexthop on this interface. |
| 1.3.6.1.4.1.21296.1.2.25.35.1.1 | RowmplsNexthopEntry | not-accessible | current | Entry of mplsNexthopTable |
| 1.3.6.1.4.1.21296.1.2.25.35.1.1.1 | ColumnmplsNexthopNexthopAddress | read-only | current | The nexthop address which can be either an IP address or a MAC address. |
| 1.3.6.1.4.1.21296.1.2.25.36 | NodeifDhcpRelay | |||
| 1.3.6.1.4.1.21296.1.2.25.36.1 | TableifDhcpRelayTable | not-accessible | current | Configurations related with dhcp-relay for this interface. |
| 1.3.6.1.4.1.21296.1.2.25.36.1.1 | RowifDhcpRelayEntry | not-accessible | current | Entry of ifDhcpRelayTable |
| 1.3.6.1.4.1.21296.1.2.25.36.1.1.1 | ColumnifDhcpRelayDhcpRelayEnabled | read-only | current | Enables dchp-relay function on this interface. Obeys global dhcp-relay settings. default value :false |
| 1.3.6.1.4.1.21296.1.2.26 | Nodetime | |||
| 1.3.6.1.4.1.21296.1.2.26.1 | Nodeclock | |||
| 1.3.6.1.4.1.21296.1.2.26.1.1 | ScalarclockCurrentTime | read-only | current | Indicates the current Date and Time of this NE. |
| 1.3.6.1.4.1.21296.1.2.26.1.2 | ScalarclockUniversalTime | read-only | current | Indicates the UTC Date and Time of this NE. |
| 1.3.6.1.4.1.21296.1.2.26.1.3 | ScalarclockTimezone | read-only | current | Indicates the Name of the Time Zone of this NE. default value :Universal-Time-Coordinated |
| 1.3.6.1.4.1.21296.1.2.26.1.4 | ScalarclockUptime | read-only | current | The reply will be truncated in 128 bytes. Indicates how long the system has been running in days hh:mm:ss format. |
| 1.3.6.1.4.1.21296.1.2.26.1.5 | ScalarclockTimeSource | read-only | current | Indicates the source of the system current time. default value :manual |
| 1.3.6.1.4.1.21296.1.2.26.1.6 | ScalarclockDSTActive | read-only | current | Whether daylight saving is active. default value :false |
| 1.3.6.1.4.1.21296.1.2.26.1.7 | ScalarclockLastTimeJump | read-only | current | The reply will be truncated in 128 bytes. Indicates last system time jump in the format '<time1> to <time2>'. Time jumps of less than 10 seconds are ignored. |
| 1.3.6.1.4.1.21296.1.2.26.1.8 | ScalarclockUptimeSeconds | read-only | current | Indicates how long the system has been running, in seconds. UNITS:sec |
| 1.3.6.1.4.1.21296.1.2.26.1.9 | ScalarclockBootTime | read-only | current | The timestamp when the system was last restarted. Associated with the uptime parameter. |
| 1.3.6.1.4.1.21296.1.2.26.2 | Nodentp | |||
| 1.3.6.1.4.1.21296.1.2.26.2.1 | ScalarntpEnabled | read-only | current | Whether ntp is enabled. default value :true |
| 1.3.6.1.4.1.21296.1.2.26.2.2 | ScalarntpAuthEnabled | read-only | current | Whether NTP authentication is enabled. default value :false |
| 1.3.6.1.4.1.21296.1.2.26.2.3 | ScalarntpActiveServer | read-only | current | Currently active NTP server. |
| 1.3.6.1.4.1.21296.1.2.26.2.4 | ScalarntpAssignmentMethod | read-only | current | The system would contain manual and dhcp configured values. System can use those onfigurations/values defined by assignment-method attributes. default value :b… |
| 1.3.6.1.4.1.21296.1.2.26.3 | NodentpKey | |||
| 1.3.6.1.4.1.21296.1.2.26.3.1 | TablentpKeyTable | not-accessible | current | Keys to be used for NTP authentication. |
| 1.3.6.1.4.1.21296.1.2.26.3.1.1 | RowntpKeyEntry | not-accessible | current | Entry of ntpKeyTable |
| 1.3.6.1.4.1.21296.1.2.26.3.1.1.1 | ColumnntpKeyKeyId | read-only | current | NTP Key-ID. |
| 1.3.6.1.4.1.21296.1.2.26.3.1.1.2 | ColumnntpKeyKeyType | read-only | current | Hash algorithm for NTP message digest computation |
| 1.3.6.1.4.1.21296.1.2.26.3.1.1.3 | ColumnntpKeyKeyValue | read-only | current | NTP Key-value. |
| 1.3.6.1.4.1.21296.1.2.26.3.1.1.4 | ColumnntpKeyIsTrusted | read-only | current | Is trusted NTP key. default value :false |
| 1.3.6.1.4.1.21296.1.2.26.4 | NodentpServer | |||
| 1.3.6.1.4.1.21296.1.2.26.4.1 | TablentpServerTable | not-accessible | current | Configured NTP server. |
| 1.3.6.1.4.1.21296.1.2.26.4.1.1 | RowntpServerEntry | not-accessible | current | Entry of ntpServerTable |
| 1.3.6.1.4.1.21296.1.2.26.4.1.1.1 | ColumnntpServerIpAddress | read-only | current | NTP Server IP address. Ipv4/Ipv6/hostname supported. |
| 1.3.6.1.4.1.21296.1.2.26.4.1.1.2 | ColumnntpServerOrigin | read-only | current | NTP address assignment method, user can convert DHCP configured NTP entry into a manual configured by changing this attribute. |
| 1.3.6.1.4.1.21296.1.2.26.4.1.1.3 | ColumnntpServerAuthKeyId | read-only | current | Key ID to be used for this server. default value :not-applicable |
| 1.3.6.1.4.1.21296.1.2.26.4.1.1.4 | ColumnntpServerAdminState | read-only | current | The administrative state of the managed object. default value :unlock |
| 1.3.6.1.4.1.21296.1.2.26.4.1.1.5 | ColumnntpServerOperState | read-only | current | The operational state of this object. default value :disabled |
| 1.3.6.1.4.1.21296.1.2.26.4.1.1.6 | ColumnntpServerAvailState | read-only | current | Availability state of an entity. |
| 1.3.6.1.4.1.21296.1.2.26.4.1.1.7 | ColumnntpServerAlarmReportControl | read-only | current | Controls the reporting of alarms for this particular object. default value :allowed |
| 1.3.6.1.4.1.21296.1.2.26.4.1.1.8 | ColumnntpServerLabel | read-only | current | The reply will be truncated in 128 bytes. User label. |
| 1.3.6.1.4.1.21296.1.2.26.5 | NodentpServerStatus | |||
| 1.3.6.1.4.1.21296.1.2.26.5.1 | TablentpServerStatusTable | not-accessible | current | NTP server status. |
| 1.3.6.1.4.1.21296.1.2.26.5.1.1 | RowntpServerStatusEntry | not-accessible | current | Entry of ntpServerStatusTable |
| 1.3.6.1.4.1.21296.1.2.26.5.1.1.1 | ColumnntpServerStatusRefid | read-only | current | Reference clock type or address for the peer. |
| 1.3.6.1.4.1.21296.1.2.26.5.1.1.2 | ColumnntpServerStatusStratum | read-only | current | Indicates the stratum of the remote peer. |
| 1.3.6.1.4.1.21296.1.2.26.5.1.1.3 | ColumnntpServerStatusType | read-only | current | Type of the peer ('l' for local reference clock, 'u' for unicast, 'm' for multicast or 'b' for broadcast) |
| 1.3.6.1.4.1.21296.1.2.26.5.1.1.4 | ColumnntpServerStatusWhen | read-only | current | Indicates time elapsed since last packet was received in seconds. UNITS:sec |
| 1.3.6.1.4.1.21296.1.2.26.5.1.1.5 | ColumnntpServerStatusPoll | read-only | current | Indicates the polling interval in seconds. UNITS:sec |
| 1.3.6.1.4.1.21296.1.2.26.5.1.1.6 | ColumnntpServerStatusReach | read-only | current | Indicates the reachability of the configured server. This is an 8-bit shift register with the most recent probe in the 2^0 position. The value 377 indicates th… |
| 1.3.6.1.4.1.21296.1.2.26.5.1.1.7 | ColumnntpServerStatusDelay | read-only | current | Delay along path to the server in milliseconds. |
| 1.3.6.1.4.1.21296.1.2.26.5.1.1.8 | ColumnntpServerStatusOffset | read-only | current | Offset of clock to the peer in milliseconds. |
| 1.3.6.1.4.1.21296.1.2.26.5.1.1.9 | ColumnntpServerStatusJitter | read-only | current | Jitter along path to the server in milliseconds. |
| 1.3.6.1.4.1.21296.1.2.26.5.1.1.10 | ColumnntpServerStatusAuthStatus | read-only | current | Authentication status of NTP server default value :none |
| 1.3.6.1.4.1.21296.1.2.26.5.1.1.11 | ColumnntpServerStatusCondition | read-only | current | Condition of NTP server. Some of possible values: sys.peer/reject/candidate/... |
| 1.3.6.1.4.1.21296.1.2.27 | NodeswServices | |||
| 1.3.6.1.4.1.21296.1.2.27.2 | NodeswControlRule | |||
| 1.3.6.1.4.1.21296.1.2.27.2.1 | TableswControlRuleTable | not-accessible | current | Optional service-specific custom rules to overide default action upon service failure. |
| 1.3.6.1.4.1.21296.1.2.27.2.1.1 | RowswControlRuleEntry | not-accessible | current | Entry of swControlRuleTable |
| 1.3.6.1.4.1.21296.1.2.27.2.1.1.1 | ColumnswControlRuleServiceName | read-only | current | Name of the service to be monitored. |
| 1.3.6.1.4.1.21296.1.2.27.2.1.1.2 | ColumnswControlRuleFailAction | read-only | current | Action profile to be used in the case of service failure. |
| 1.3.6.1.4.1.21296.1.2.27.3 | NodeswService | |||
| 1.3.6.1.4.1.21296.1.2.27.3.1 | TableswServiceTable | not-accessible | current | Software service running in the system. |
| 1.3.6.1.4.1.21296.1.2.27.3.1.1 | RowswServiceEntry | not-accessible | current | Entry of swServiceTable |
| 1.3.6.1.4.1.21296.1.2.27.3.1.1.1 | ColumnswServiceSvName | read-only | current | A unique Id for each service instance on the NE. Contains card type, shelf, slot information. |
| 1.3.6.1.4.1.21296.1.2.27.3.1.1.2 | ColumnswServiceEquipment | read-only | current | Reference to the equipment on which the service is running. |
| 1.3.6.1.4.1.21296.1.2.27.3.1.1.3 | ColumnswServiceLocation | read-only | current | Location where the service is running - host/container info. |
| 1.3.6.1.4.1.21296.1.2.27.3.1.1.4 | ColumnswServiceState | read-only | current | Current status of the service. |
| 1.3.6.1.4.1.21296.1.2.27.3.1.1.5 | ColumnswServiceStateDetails | read-only | current | Brief description of the service status. |
| 1.3.6.1.4.1.21296.1.2.27.3.1.1.6 | ColumnswServiceCpuUsage | read-only | current | Current usage of CPU by the service, in percentage. In a multi-core system, this indicates the overall usage relative to all cores. |
| 1.3.6.1.4.1.21296.1.2.27.3.1.1.7 | ColumnswServiceMemoryUsage | read-only | current | Current usage of memory by the service, in percentage. |
| 1.3.6.1.4.1.21296.1.2.27.3.1.1.8 | ColumnswServiceUptime | read-only | current | Time since the service turned up, in days:hours:minutes. |
| 1.3.6.1.4.1.21296.1.2.27.3.1.1.9 | ColumnswServiceLastStartTime | read-only | current | Time of the last service start/boot. |
| 1.3.6.1.4.1.21296.1.2.27.3.1.1.10 | ColumnswServiceRebootCount | read-only | current | The number of times a service has restarted. |
| 1.3.6.1.4.1.21296.1.2.27.4 | NodeswContainer | |||
| 1.3.6.1.4.1.21296.1.2.27.4.1 | TableswContainerTable | not-accessible | current | List of OS-level containers. |
| 1.3.6.1.4.1.21296.1.2.27.4.1.1 | RowswContainerEntry | not-accessible | current | Entry of swContainerTable |
| 1.3.6.1.4.1.21296.1.2.27.4.1.1.1 | ColumnswContainerContainerName | read-only | current | A unique Id for each container. |
| 1.3.6.1.4.1.21296.1.2.27.4.1.1.2 | ColumnswContainerEquipment | read-only | current | Reference to the equipment on which the container is running. |
| 1.3.6.1.4.1.21296.1.2.27.4.1.1.3 | ColumnswContainerState | read-only | current | Current status of the container. |
| 1.3.6.1.4.1.21296.1.2.27.4.1.1.4 | ColumnswContainerDescription | read-only | current | Brief description of the container instance. |
| 1.3.6.1.4.1.21296.1.2.27.4.1.1.5 | ColumnswContainerCpuUsage | read-only | current | Current usage of CPU by the container, in percentage. In a multi-core system, this indicates the overall usage relative to all cores. |
| 1.3.6.1.4.1.21296.1.2.27.4.1.1.6 | ColumnswContainerMemoryUsage | read-only | current | Current usage of memory by the container, in percentage. |
| 1.3.6.1.4.1.21296.1.2.27.4.1.1.7 | ColumnswContainerUptime | read-only | current | Time since the container started. |
| 1.3.6.1.4.1.21296.1.2.28 | Nodeswm | |||
| 1.3.6.1.4.1.21296.1.2.28.2 | NodefileServer | |||
| 1.3.6.1.4.1.21296.1.2.28.2.1 | TablefileServerTable | not-accessible | current | User configurable file-server (e.g SFTP server), to be used by transfer operations (upload/download). |
| 1.3.6.1.4.1.21296.1.2.28.2.1.1 | RowfileServerEntry | not-accessible | current | Entry of fileServerTable |
| 1.3.6.1.4.1.21296.1.2.28.2.1.1.1 | ColumnfileServerName | read-only | current | Name of the server, as usable in download/upload commands. |
| 1.3.6.1.4.1.21296.1.2.28.2.1.1.2 | ColumnfileServerServerAddress | read-only | current | Address of the file-server Conditions:../protocol != 'file' |
| 1.3.6.1.4.1.21296.1.2.28.2.1.1.3 | ColumnfileServerServerPort | read-only | current | Port used for file transfer; if not provided, default will be used according with selected protocol. Conditions:../protocol != 'file' |
| 1.3.6.1.4.1.21296.1.2.28.2.1.1.4 | ColumnfileServerProtocol | read-only | current | The file transfer protocol that this server supports. Non-secure protocols (ftp and http) are supported conditionally on configured security policies. |
| 1.3.6.1.4.1.21296.1.2.28.2.1.1.5 | ColumnfileServerUserName | read-only | current | User name credentials for the remote file server. Conditions:../protocol != 'file' |
| 1.3.6.1.4.1.21296.1.2.28.2.1.1.6 | ColumnfileServerPassword | read-only | current | Password credentials for the remote file server. Conditions:../protocol != 'file' |
| 1.3.6.1.4.1.21296.1.2.28.2.1.1.7 | ColumnfileServerInitialPath | read-only | current | The reply will be truncated in 128 bytes. The directory in the file server that is used as source/destination. If empty, means the root directory (/) on the se… |
| 1.3.6.1.4.1.21296.1.2.28.2.1.1.8 | ColumnfileServerLabel | read-only | current | The reply will be truncated in 128 bytes. User label. |
| 1.3.6.1.4.1.21296.1.2.28.4 | NodesoftwareLoad | |||
| 1.3.6.1.4.1.21296.1.2.28.4.1 | TablesoftwareLoadTable | not-accessible | current | Information on the Software Load present in the system. |
| 1.3.6.1.4.1.21296.1.2.28.4.1.1 | RowsoftwareLoadEntry | not-accessible | current | Entry of softwareLoadTable |
| 1.3.6.1.4.1.21296.1.2.28.4.1.1.1 | ColumnsoftwareLoadSwloadState | read-only | current | Software load state |
| 1.3.6.1.4.1.21296.1.2.28.4.1.1.2 | ColumnsoftwareLoadSwloadVersion | read-only | current | Software load version |
| 1.3.6.1.4.1.21296.1.2.28.4.1.1.3 | ColumnsoftwareLoadSwloadManifest | read-only | current | The reply will be truncated in 128 bytes. Software load manifest file. Only of relevance for software load installable. |
| 1.3.6.1.4.1.21296.1.2.28.4.1.1.4 | ColumnsoftwareLoadSwloadPrepared | read-only | current | Software load prepared. Only of relevance for software load installable. |
| 1.3.6.1.4.1.21296.1.2.28.4.1.1.5 | ColumnsoftwareLoadSwloadStatus | read-only | current | Software load current status. Only of relevance for software load installable. |
| 1.3.6.1.4.1.21296.1.2.28.4.1.1.6 | ColumnsoftwareLoadSwloadInformation | read-only | current | The reply will be truncated in 128 bytes. Software load information |
| 1.3.6.1.4.1.21296.1.2.28.4.1.1.7 | ColumnsoftwareLoadSwloadActivationType | read-only | current | Software load activation type Only of relevance for software load state installable. default value :direct |
| 1.3.6.1.4.1.21296.1.2.28.4.1.1.8 | ColumnsoftwareLoadSwloadVendor | read-only | current | The reply will be truncated in 128 bytes. Software load vendor |
| 1.3.6.1.4.1.21296.1.2.28.4.1.1.9 | ColumnsoftwareLoadSwloadProduct | read-only | current | The reply will be truncated in 128 bytes. Software load product |
| 1.3.6.1.4.1.21296.1.2.28.4.1.1.10 | ColumnsoftwareLoadSwloadLabel | read-only | current | The reply will be truncated in 128 bytes. Software load label |
| 1.3.6.1.4.1.21296.1.2.28.4.1.1.11 | ColumnsoftwareLoadSwloadDeltaLabel | read-only | current | The reply will be truncated in 128 bytes. Software load delta label; Only of relevance for software load state active. |
| 1.3.6.1.4.1.21296.1.2.28.4.1.1.12 | ColumnsoftwareLoadSwloadPkgType | read-only | current | The reply will be truncated in 128 bytes. Software load package type Only of relevance for software load state installable. |
| 1.3.6.1.4.1.21296.1.2.28.5 | NodeswComponent | |||
| 1.3.6.1.4.1.21296.1.2.28.5.1 | TableswComponentTable | not-accessible | current | Software load component details |
| 1.3.6.1.4.1.21296.1.2.28.5.1.1 | RowswComponentEntry | not-accessible | current | Entry of swComponentTable |
| 1.3.6.1.4.1.21296.1.2.28.5.1.1.1 | ColumnswComponentState | read-only | current | Package state default value :unknown |
| 1.3.6.1.4.1.21296.1.2.28.5.1.1.2 | ColumnswComponentVersion | read-only | current | Package version |
| 1.3.6.1.4.1.21296.1.2.28.5.1.1.3 | ColumnswComponentName | read-only | current | The reply will be truncated in 128 bytes. Package name |
| 1.3.6.1.4.1.21296.1.2.28.5.1.1.4 | ColumnswComponentDescription | read-only | current | The reply will be truncated in 128 bytes. Package information |
| 1.3.6.1.4.1.21296.1.2.28.6 | NodeswSubcomponent | |||
| 1.3.6.1.4.1.21296.1.2.28.6.1 | TableswSubcomponentTable | not-accessible | current | Software load subcomponent details |
| 1.3.6.1.4.1.21296.1.2.28.6.1.1 | RowswSubcomponentEntry | not-accessible | current | Entry of swSubcomponentTable |
| 1.3.6.1.4.1.21296.1.2.28.6.1.1.1 | ColumnswSubcomponentState | read-only | current | Package state default value :unknown |
| 1.3.6.1.4.1.21296.1.2.28.6.1.1.2 | ColumnswSubcomponentVersion | read-only | current | Package version |
| 1.3.6.1.4.1.21296.1.2.28.6.1.1.3 | ColumnswSubcomponentName | read-only | current | The reply will be truncated in 128 bytes. Package name |
| 1.3.6.1.4.1.21296.1.2.28.6.1.1.4 | ColumnswSubcomponentDescription | read-only | current | The reply will be truncated in 128 bytes. Package information |
| 1.3.6.1.4.1.21296.1.2.28.7 | NodepackagedFw | |||
| 1.3.6.1.4.1.21296.1.2.28.7.1 | TablepackagedFwTable | not-accessible | current | Firmware version included in this software-load. Versions for the same firmware can be different per equipment-type. |
| 1.3.6.1.4.1.21296.1.2.28.7.1.1 | RowpackagedFwEntry | not-accessible | current | Entry of packagedFwTable |
| 1.3.6.1.4.1.21296.1.2.28.7.1.1.1 | ColumnpackagedFwEquipmentType | read-only | current | Type of the equipment (card, etc) that will use this firmware. |
| 1.3.6.1.4.1.21296.1.2.28.7.1.1.2 | ColumnpackagedFwFwName | read-only | current | Name of the firmware. |
| 1.3.6.1.4.1.21296.1.2.28.7.1.1.3 | ColumnpackagedFwFwVersion | read-only | current | Included version of the firmware. |
| 1.3.6.1.4.1.21296.1.2.28.9 | Nodemanifest | |||
| 1.3.6.1.4.1.21296.1.2.28.9.1 | TablemanifestTable | not-accessible | current | Downloaded manifest file and it's information. |
| 1.3.6.1.4.1.21296.1.2.28.9.1.1 | RowmanifestEntry | not-accessible | current | Entry of manifestTable |
| 1.3.6.1.4.1.21296.1.2.28.9.1.1.1 | ColumnmanifestFile | read-only | current | The reply will be truncated in 128 bytes. Manifest file |
| 1.3.6.1.4.1.21296.1.2.28.9.1.1.2 | ColumnmanifestSignature | read-only | current | Manifest file signature |
| 1.3.6.1.4.1.21296.1.2.28.9.1.1.3 | ColumnmanifestDownloadedOn | read-only | current | Manifest file downloaded timestamp |
| 1.3.6.1.4.1.21296.1.2.28.9.1.1.4 | ColumnmanifestInformation | read-only | current | The reply will be truncated in 128 bytes. Information on the manifest downloaded |
| 1.3.6.1.4.1.21296.1.2.28.10 | NodedownloadedImage | |||
| 1.3.6.1.4.1.21296.1.2.28.10.1 | TabledownloadedImageTable | not-accessible | current | Downloaded software image files |
| 1.3.6.1.4.1.21296.1.2.28.10.1.1 | RowdownloadedImageEntry | not-accessible | current | Entry of downloadedImageTable |
| 1.3.6.1.4.1.21296.1.2.28.10.1.1.1 | ColumndownloadedImageName | read-only | current | The reply will be truncated in 128 bytes. Downloaded software image name |
| 1.3.6.1.4.1.21296.1.2.28.10.1.1.2 | ColumndownloadedImageSignature | read-only | current | Downloaded software image file signature |
| 1.3.6.1.4.1.21296.1.2.28.11 | NodesoftwareLocation | |||
| 1.3.6.1.4.1.21296.1.2.28.11.1 | TablesoftwareLocationTable | not-accessible | current | Software load information associated to each of the equipment. |
| 1.3.6.1.4.1.21296.1.2.28.11.1.1 | RowsoftwareLocationEntry | not-accessible | current | Entry of softwareLocationTable |
| 1.3.6.1.4.1.21296.1.2.28.11.1.1.1 | ColumnsoftwareLocationLocationId | read-only | current | Location of the equipment |
| 1.3.6.1.4.1.21296.1.2.28.12 | Nodedatabase | |||
| 1.3.6.1.4.1.21296.1.2.28.12.1 | TabledatabaseTable | not-accessible | current | The list of the databases in the system. |
| 1.3.6.1.4.1.21296.1.2.28.12.1.1 | RowdatabaseEntry | not-accessible | current | Entry of databaseTable |
| 1.3.6.1.4.1.21296.1.2.28.12.1.1.1 | ColumndatabaseType | read-only | current | Database identifier. |
| 1.3.6.1.4.1.21296.1.2.28.12.1.1.2 | ColumndatabaseState | read-only | current | Indicates the state of the database. |
| 1.3.6.1.4.1.21296.1.2.28.12.1.1.3 | ColumndatabaseVersion | read-only | current | Indicates the database version. |
| 1.3.6.1.4.1.21296.1.2.28.12.1.1.4 | ColumndatabaseVendor | read-only | current | Vendor information of the database. |
| 1.3.6.1.4.1.21296.1.2.28.12.1.1.5 | ColumndatabaseProduct | read-only | current | Indicates the network element family this database belongs to. |
| 1.3.6.1.4.1.21296.1.2.28.12.1.1.6 | ColumndatabaseNeName | read-only | current | The reply will be truncated in 128 bytes. User assigned name for this NE as present in this database. |
| 1.3.6.1.4.1.21296.1.2.28.12.1.1.7 | ColumndatabaseNodeControllerSerialNumber | read-only | current | Serial number of the node controller. |
| 1.3.6.1.4.1.21296.1.2.28.12.1.1.8 | ColumndatabaseLoopbackIpv4 | read-only | current | loopback ipv4 address. |
| 1.3.6.1.4.1.21296.1.2.28.12.1.1.9 | ColumndatabaseLoopbackIpv6 | read-only | current | loopback ipv6 address. |
| 1.3.6.1.4.1.21296.1.2.28.12.1.1.10 | ColumndatabaseBackupTime | read-only | current | Indicates the database snapshot backup time. |
| 1.3.6.1.4.1.21296.1.2.28.12.1.1.11 | ColumndatabaseDescription | read-only | current | Database description |
| 1.3.6.1.4.1.21296.1.2.28.13 | NodethirdPartyApp | |||
| 1.3.6.1.4.1.21296.1.2.28.13.1 | TablethirdPartyAppTable | not-accessible | current | List of 3rd party applications. |
| 1.3.6.1.4.1.21296.1.2.28.13.1.1 | RowthirdPartyAppEntry | not-accessible | current | Entry of thirdPartyAppTable |
| 1.3.6.1.4.1.21296.1.2.28.13.1.1.1 | ColumnthirdPartyAppAppName | read-only | current | Third party app name. |
| 1.3.6.1.4.1.21296.1.2.28.13.1.1.2 | ColumnthirdPartyAppVersion | read-only | current | Third party app version. |
| 1.3.6.1.4.1.21296.1.2.28.13.1.1.3 | ColumnthirdPartyAppVendor | read-only | current | Third party app vendor. |
| 1.3.6.1.4.1.21296.1.2.28.13.1.1.4 | ColumnthirdPartyAppProduct | read-only | current | The reply will be truncated in 128 bytes. Third party app product. |
| 1.3.6.1.4.1.21296.1.2.28.13.1.1.5 | ColumnthirdPartyAppLabel | read-only | current | The reply will be truncated in 128 bytes. Third party app label. |
| 1.3.6.1.4.1.21296.1.2.28.13.1.1.6 | ColumnthirdPartyAppState | read-only | current | Third party app state. default value :running |
| 1.3.6.1.4.1.21296.1.2.28.13.1.1.7 | ColumnthirdPartyAppInformation | read-only | current | The reply will be truncated in 128 bytes. Third party app information. |
| 1.3.6.1.4.1.21296.1.2.28.13.1.1.8 | ColumnthirdPartyAppEnable | read-only | current | Third-party-app enabled state. If enabled, app is started(app is enabled also upon system restart). If disabled, app is stopped. default value :true |
| 1.3.6.1.4.1.21296.1.2.28.14 | NodethirdPartyFw | |||
| 1.3.6.1.4.1.21296.1.2.28.14.1 | TablethirdPartyFwTable | not-accessible | current | List of 3rd party fw files available to be used to upgrade 3rd party equipment. |
| 1.3.6.1.4.1.21296.1.2.28.14.1.1 | RowthirdPartyFwEntry | not-accessible | current | Entry of thirdPartyFwTable |
| 1.3.6.1.4.1.21296.1.2.28.14.1.1.1 | ColumnthirdPartyFwFwName | read-only | current | Name of the firmware. |
| 1.3.6.1.4.1.21296.1.2.28.14.1.1.2 | ColumnthirdPartyFwFileStatus | read-only | current | Firmware file status. |
| 1.3.6.1.4.1.21296.1.2.28.14.1.1.3 | ColumnthirdPartyFwPath | read-only | current | The reply will be truncated in 128 bytes. Path for the firmware image. |
| 1.3.6.1.4.1.21296.1.2.28.14.1.1.4 | ColumnthirdPartyFwVersion | read-only | current | Firmware version. |
| 1.3.6.1.4.1.21296.1.2.28.14.1.1.5 | ColumnthirdPartyFwCrc | read-only | current | Cyclic redundancy check (CRC) of the firmware image, used to validate the file when present. |
| 1.3.6.1.4.1.21296.1.2.28.14.1.1.6 | ColumnthirdPartyFwVendor | read-only | current | The vendor of the firmware. |
| 1.3.6.1.4.1.21296.1.2.28.14.1.1.7 | ColumnthirdPartyFwPartNumber | read-only | current | The part-number of the firmware.This is originally a YANG leaf-list, here encoded as a comma separated list of values. |
| 1.3.6.1.4.1.21296.1.2.28.14.1.1.8 | ColumnthirdPartyFwNsaUpgradeVersion | read-only | current | The reply will be truncated in 128 bytes. Versions from where the upgrade is non service affecting (nsa). |
| 1.3.6.1.4.1.21296.1.2.28.14.1.1.9 | ColumnthirdPartyFwPresentInEqpt | read-only | current | List of resources that contain this version.This is originally a YANG leaf-list, here encoded as a comma separated list of values. |
| 1.3.6.1.4.1.21296.1.2.28.14.1.1.10 | ColumnthirdPartyFwApplicableEqpt | read-only | current | List of resources that this firmware can be applied apply.This is originally a YANG leaf-list, here encoded as a comma separated list of values. |
| 1.3.6.1.4.1.21296.1.2.28.15 | NodefruInfo | |||
| 1.3.6.1.4.1.21296.1.2.28.15.1 | TablefruInfoTable | not-accessible | current | The packaged FRU information associated to a particular equipment-type. |
| 1.3.6.1.4.1.21296.1.2.28.15.1.1 | RowfruInfoEntry | not-accessible | current | Entry of fruInfoTable |
| 1.3.6.1.4.1.21296.1.2.28.15.1.1.1 | ColumnfruInfoEquipmentType | read-only | current | Type of the equipment |
| 1.3.6.1.4.1.21296.1.2.28.16 | NodemanifestComponent | |||
| 1.3.6.1.4.1.21296.1.2.28.16.1 | TablemanifestComponentTable | not-accessible | current | packaged component details |
| 1.3.6.1.4.1.21296.1.2.28.16.1.1 | RowmanifestComponentEntry | not-accessible | current | Entry of manifestComponentTable |
| 1.3.6.1.4.1.21296.1.2.28.16.1.1.1 | ColumnmanifestComponentState | read-only | current | Package state default value :unknown |
| 1.3.6.1.4.1.21296.1.2.28.16.1.1.2 | ColumnmanifestComponentVersion | read-only | current | Package version |
| 1.3.6.1.4.1.21296.1.2.28.16.1.1.3 | ColumnmanifestComponentName | read-only | current | The reply will be truncated in 128 bytes. Package name |
| 1.3.6.1.4.1.21296.1.2.28.16.1.1.4 | ColumnmanifestComponentDescription | read-only | current | The reply will be truncated in 128 bytes. Package information |
| 1.3.6.1.4.1.21296.1.2.28.17 | NodemanifestFirmware | |||
| 1.3.6.1.4.1.21296.1.2.28.17.1 | TablemanifestFirmwareTable | not-accessible | current | Packaged Firmware detials. |
| 1.3.6.1.4.1.21296.1.2.28.17.1.1 | RowmanifestFirmwareEntry | not-accessible | current | Entry of manifestFirmwareTable |
| 1.3.6.1.4.1.21296.1.2.28.17.1.1.1 | ColumnmanifestFirmwareFwName | read-only | current | Name of the firmware. |
| 1.3.6.1.4.1.21296.1.2.28.17.1.1.2 | ColumnmanifestFirmwareFwVersion | read-only | current | Included version of the firmware. |
| 1.3.6.1.4.1.21296.1.2.28.18 | NodethirdPartyAppInfo | |||
| 1.3.6.1.4.1.21296.1.2.28.18.1 | TablethirdPartyAppInfoTable | not-accessible | current | List of 3rd party applications available per location. |
| 1.3.6.1.4.1.21296.1.2.28.18.1.1 | RowthirdPartyAppInfoEntry | not-accessible | current | Entry of thirdPartyAppInfoTable |
| 1.3.6.1.4.1.21296.1.2.28.18.1.1.1 | ColumnthirdPartyAppInfoAppName | read-only | current | Third party app name. |
| 1.3.6.1.4.1.21296.1.2.28.18.1.1.2 | ColumnthirdPartyAppInfoVersion | read-only | current | Third party app version. |
| 1.3.6.1.4.1.21296.1.2.28.18.1.1.3 | ColumnthirdPartyAppInfoState | read-only | current | Third party app state. default value :running |
| 1.3.6.1.4.1.21296.1.2.28.18.1.1.4 | ColumnthirdPartyAppInfoInformation | read-only | current | The reply will be truncated in 128 bytes. Third party app information. |
| 1.3.6.1.4.1.21296.1.2.28.19 | NodeupgradeStatus | |||
| 1.3.6.1.4.1.21296.1.2.28.19.1 | TableupgradeStatusTable | not-accessible | current | Provides information of the upgrade status for each entity in the system. |
| 1.3.6.1.4.1.21296.1.2.28.19.1.1 | RowupgradeStatusEntry | not-accessible | current | Entry of upgradeStatusTable |
| 1.3.6.1.4.1.21296.1.2.28.19.1.1.1 | ColumnupgradeStatusResource | read-only | current | The reply will be truncated in 128 bytes. The resource to which the status refers to. May represent the entire ne, a chassis, or a card. For ne and chassis, th… |
| 1.3.6.1.4.1.21296.1.2.28.19.1.1.2 | ColumnupgradeStatusStatus | read-only | current | The current upgrade status for this resource. default value :idle |
| 1.3.6.1.4.1.21296.1.2.28.19.1.1.3 | ColumnupgradeStatusStartTime | read-only | current | The start timestamp of the current phase of upgrade. Will have value 'na' if this entity was idle since startup. |
| 1.3.6.1.4.1.21296.1.2.28.19.1.1.4 | ColumnupgradeStatusEndTime | read-only | current | The end timestamp of the current phase of upgrade. Will have value 'na' if this entity has not finished any upgrade phase since startup. |
| 1.3.6.1.4.1.21296.1.2.28.19.1.1.5 | ColumnupgradeStatusDetails | read-only | current | The reply will be truncated in 128 bytes. Details on the current upgrade. |
| 1.3.6.1.4.1.21296.1.2.28.19.1.1.6 | ColumnupgradeStatusToSwloadVersion | read-only | current | Target Software Load Version. |
| 1.3.6.1.4.1.21296.1.2.28.19.1.1.7 | ColumnupgradeStatusStep | read-only | current | The identifier for the current upgrade step. |
| 1.3.6.1.4.1.21296.1.2.28.19.1.1.8 | ColumnupgradeStatusStepStartTime | read-only | current | The timestamp at which the current upgrade step was initiated. |
| 1.3.6.1.4.1.21296.1.2.29 | Nodetelemetry | |||
| 1.3.6.1.4.1.21296.1.2.29.1 | NodetelemetryInfo | |||
| 1.3.6.1.4.1.21296.1.2.29.1.1 | ScalartelemetryResetSampleTime | read-only | current | When set to a value different from 0, this parameter will restrict sample subscriptions to use a sample-time matching this value, and will also reset statistic… |
| 1.3.6.1.4.1.21296.1.2.29.6 | NodecurrentSubscription | |||
| 1.3.6.1.4.1.21296.1.2.29.6.1 | TablecurrentSubscriptionTable | not-accessible | current | List representation of telemetry subscriptions that are configured in the system, otherwise known as current telemetry subscriptions. |
| 1.3.6.1.4.1.21296.1.2.29.6.1.1 | RowcurrentSubscriptionEntry | not-accessible | current | Entry of currentSubscriptionTable |
| 1.3.6.1.4.1.21296.1.2.29.6.1.1.1 | ColumncurrentSubscriptionSubscriptionName | read-only | current | User configured identifier of the telemetry subscription. This value is used primarily for subscriptions configured locally on the network element. For dial-in… |
| 1.3.6.1.4.1.21296.1.2.29.6.1.1.2 | ColumncurrentSubscriptionRelatedSessionId | read-only | current | Identifier of the telemetry subscription session. |
| 1.3.6.1.4.1.21296.1.2.29.6.1.1.3 | ColumncurrentSubscriptionRelatedDialOutServer | read-only | current | Identifier of the subscrition dial-out server address. Only applicable to dial-out based subscriptions. |
| 1.3.6.1.4.1.21296.1.2.29.6.1.1.4 | ColumncurrentSubscriptionSessionType | read-only | current | Identifier of the type of subscription session. |
| 1.3.6.1.4.1.21296.1.2.29.6.1.1.5 | ColumncurrentSubscriptionSessionProtocol | read-only | current | Selection of the transport protocol for the telemetry stream. default value :gnmi |
| 1.3.6.1.4.1.21296.1.2.29.6.1.1.6 | ColumncurrentSubscriptionEncoding | read-only | current | Specifies the data encoding scheme to be used for data sent to and from the target device. The encoding may be specified for all data, or optionally on a per-R… |
| 1.3.6.1.4.1.21296.1.2.29.6.1.1.7 | ColumncurrentSubscriptionTransferMode | read-only | current | Specifies the data transfer mode to the target device. default value :stream |
| 1.3.6.1.4.1.21296.1.2.29.6.1.1.8 | ColumncurrentSubscriptionUpdatesOnly | read-only | current | A Boolean flag allowing to only send updates to the current state, when set to true the device will not send the initial current value, rather only changes to … |
| 1.3.6.1.4.1.21296.1.2.29.6.1.1.9 | ColumncurrentSubscriptionUserAccess | read-only | current | Username in order to resolve paths according to user access. |
| 1.3.6.1.4.1.21296.1.2.29.7 | NodesubscriptionPath | |||
| 1.3.6.1.4.1.21296.1.2.29.7.1 | TablesubscriptionPathTable | not-accessible | current | List of single subscriptions paths keyed by subscription-path-name. |
| 1.3.6.1.4.1.21296.1.2.29.7.1.1 | RowsubscriptionPathEntry | not-accessible | current | Entry of subscriptionPathTable |
| 1.3.6.1.4.1.21296.1.2.29.7.1.1.1 | ColumnsubscriptionPathName | read-only | current | Name of the single subscription path in the subscription list. |
| 1.3.6.1.4.1.21296.1.2.29.7.1.1.2 | ColumnsubscriptionPathSubscriptionPath | read-only | current | The reply will be truncated in 128 bytes. Specifies a path in the data model path corresponding to the data in the message |
| 1.3.6.1.4.1.21296.1.2.29.7.1.1.3 | ColumnsubscriptionPathOrigin | read-only | current | Specifies the schema tree in order to disambiguate the path. |
| 1.3.6.1.4.1.21296.1.2.29.7.1.1.4 | ColumnsubscriptionPathMode | read-only | current | Specify how the device should return the values of the subscription-path default value :target-defined |
| 1.3.6.1.4.1.21296.1.2.29.7.1.1.5 | ColumnsubscriptionPathSampleInterval | read-only | current | Time in milliseconds between the device's sample of a telemetry data source. For example, setting this to 2000 would require the local device to collect the te… |
| 1.3.6.1.4.1.21296.1.2.29.7.1.1.6 | ColumnsubscriptionPathHeartbeatInterval | read-only | current | Maximum time interval in milliseconds that may pass between updates from a device to a telemetry collector. If this interval expires, but there is no updated d… |
| 1.3.6.1.4.1.21296.1.2.29.7.1.1.7 | ColumnsubscriptionPathSuppressRedundant | read-only | current | Boolean flag to control suppression of redundant telemetry updates to the collector platform. If this flag is set to TRUE, then the collector will only send an… |
| 1.3.6.1.4.1.21296.1.2.30 | Nodetopology | |||
| 1.3.6.1.4.1.21296.1.2.30.2 | Nodelldp | |||
| 1.3.6.1.4.1.21296.1.2.30.2.1 | ScalarlldpHoldOnTimer | read-only | current | Time to keep neighbor information, in case neighbor does not have an explicit Time-To-Live (TTL) TLV. UNITS:seconds default value :900 |
| 1.3.6.1.4.1.21296.1.2.30.3 | NodelldpNeighbor | |||
| 1.3.6.1.4.1.21296.1.2.30.3.1 | TablelldpNeighborTable | not-accessible | current | LLDP remote system discovered by lldp-port. This information is kept indefinitely, until the port is decomissioned, or the data is manually cleared by user. |
| 1.3.6.1.4.1.21296.1.2.30.3.1.1 | RowlldpNeighborEntry | not-accessible | current | Entry of lldpNeighborTable |
| 1.3.6.1.4.1.21296.1.2.30.3.1.1.1 | ColumnlldpNeighborLldpPort | read-only | current | Local port that is connected to this LLDP neighbor. |
| 1.3.6.1.4.1.21296.1.2.30.3.1.1.2 | ColumnlldpNeighborDirection | read-only | current | Direction in which the neighbor was detected. |
| 1.3.6.1.4.1.21296.1.2.30.3.1.1.3 | ColumnlldpNeighborLastUpdate | read-only | current | Timestamp with the last time this neighbor info was updated. |
| 1.3.6.1.4.1.21296.1.2.30.3.1.1.4 | ColumnlldpNeighborAge | read-only | current | Number of seconds since discovery. UNITS:seconds |
| 1.3.6.1.4.1.21296.1.2.30.3.1.1.5 | ColumnlldpNeighborChassisIdSubtype | read-only | current | This attribute describes the format of the chassis-id string. |
| 1.3.6.1.4.1.21296.1.2.30.3.1.1.6 | ColumnlldpNeighborChassisId | read-only | current | The reply will be truncated in 128 bytes. This attribute identifies the chassis component withing the LLDP remote system.. This value needs to be interpreted a… |
| 1.3.6.1.4.1.21296.1.2.30.3.1.1.7 | ColumnlldpNeighborPortIdSubtype | read-only | current | This attribute describes the format of the port-id string. |
| 1.3.6.1.4.1.21296.1.2.30.3.1.1.8 | ColumnlldpNeighborPortId | read-only | current | The reply will be truncated in 128 bytes. This attribute identifies the port within the LLDP remote system chassis. This value needs to be interpreted accordin… |
| 1.3.6.1.4.1.21296.1.2.30.3.1.1.9 | ColumnlldpNeighborPortDescription | read-only | current | The reply will be truncated in 128 bytes. The string value used to identify the description of the given port associated with the remote system. |
| 1.3.6.1.4.1.21296.1.2.30.3.1.1.10 | ColumnlldpNeighborSystemName | read-only | current | The reply will be truncated in 128 bytes. The string value used to identify the system name of the remote system. |
| 1.3.6.1.4.1.21296.1.2.30.3.1.1.11 | ColumnlldpNeighborSystemDescription | read-only | current | The reply will be truncated in 128 bytes. The string value used to identify the system description of the remote system. |
| 1.3.6.1.4.1.21296.1.2.30.3.1.1.12 | ColumnlldpNeighborSupportedCapabilities | read-only | current | This attribute describes the remote system supported capabilities. |
| 1.3.6.1.4.1.21296.1.2.30.3.1.1.13 | ColumnlldpNeighborEnabledCapabilities | read-only | current | This attribute describes the remote system enabled capabilities. |
| 1.3.6.1.4.1.21296.1.2.30.3.1.1.14 | ColumnlldpNeighborTtl | read-only | current | Remote system info Time-To-Live (TTL); the number of seconds until information expires. If the remote system deosn't provide a ttl value, this parameter is set… |
| 1.3.6.1.4.1.21296.1.2.30.4 | NodemanagementAddress | |||
| 1.3.6.1.4.1.21296.1.2.30.4.1 | TablemanagementAddressTable | not-accessible | current | Management address information about a particular chassis component. There may be multiple management addresses configured on the remote system identified by a… |
| 1.3.6.1.4.1.21296.1.2.30.4.1.1 | RowmanagementAddressEntry | not-accessible | current | Entry of managementAddressTable |
| 1.3.6.1.4.1.21296.1.2.30.4.1.1.1 | ColumnmanagementAddressAddressSubtype | read-only | current | The type of management address identifier encoding used in the associated 'address' attribute. |
| 1.3.6.1.4.1.21296.1.2.30.4.1.1.2 | ColumnmanagementAddressAddress | read-only | current | The string value used to identify the management address component associated with the remote system. The purpose of this address is to contact the management … |
| 1.3.6.1.4.1.21296.1.2.30.4.1.1.3 | ColumnmanagementAddressIfSubtype | read-only | current | This attribute describes the basis of a particular type of interface associated with the management address. |
| 1.3.6.1.4.1.21296.1.2.30.4.1.1.4 | ColumnmanagementAddressIfId | read-only | current | The integer value used to identify the interface number regarding the management address component associated with the remote system. |
| 1.3.6.1.4.1.21296.1.2.30.4.1.1.5 | ColumnmanagementAddressAddressOid | read-only | current | The Object Identifier (OID) value used to identify the type of hardware component or protocol entity associated with the management address advertised by the r… |
| 1.3.6.1.4.1.21296.1.2.30.5 | NodecustomTlv | |||
| 1.3.6.1.4.1.21296.1.2.30.5.1 | TablecustomTlvTable | not-accessible | current | List of Organizational Specific TLVs (Type-Lengh-Value) parameters. |
| 1.3.6.1.4.1.21296.1.2.30.5.1.1 | RowcustomTlvEntry | not-accessible | current | Entry of customTlvTable |
| 1.3.6.1.4.1.21296.1.2.30.5.1.1.1 | ColumncustomTlvOui | read-only | current | The Organization Unique Identifier (OUI) of this TLV. Hexadecimal representation of the 24 bit identier. |
| 1.3.6.1.4.1.21296.1.2.30.5.1.1.2 | ColumncustomTlvSubtype | read-only | current | The sub-type identifier of the TLV in the scope of the OUI. |
| 1.3.6.1.4.1.21296.1.2.30.5.1.1.3 | ColumncustomTlvValue | read-only | current | The reply will be truncated in 128 bytes. The value of the TLV. |
| 1.3.6.1.4.1.21296.1.2.30.6 | NodelldpPortStatistics | |||
| 1.3.6.1.4.1.21296.1.2.30.6.1 | TablelldpPortStatisticsTable | not-accessible | current | LLDP frame reception statistics for a particular port and direction. All counter values in a particular entry shall be maintained on a continuing basis and sha… |
| 1.3.6.1.4.1.21296.1.2.30.6.1.1 | RowlldpPortStatisticsEntry | not-accessible | current | Entry of lldpPortStatisticsTable |
| 1.3.6.1.4.1.21296.1.2.30.6.1.1.1 | ColumnlldpPortStatisticsLldpPort | read-only | current | Local port that is associated with the LLDP agent. |
| 1.3.6.1.4.1.21296.1.2.30.6.1.1.2 | ColumnlldpPortStatisticsDirection | read-only | current | Direction associated with lldp statistics. |
| 1.3.6.1.4.1.21296.1.2.30.6.1.1.3 | ColumnlldpPortStatisticsLastChangeTime | read-only | current | The timestamp associated with the last time this port received LLDP updates. default value :0000-01-01T00:00:00Z |
| 1.3.6.1.4.1.21296.1.2.30.6.1.1.4 | ColumnlldpPortStatisticsLastClearTime | read-only | current | The timestamp associated with the last time this port was cleared. default value :0000-01-01T00:00:00Z |
| 1.3.6.1.4.1.21296.1.2.30.6.1.1.5 | ColumnlldpPortStatisticsTotalAgeouts | read-only | current | A count of the times that a neighbor's information is deleted from the lldp-neighbor list due to TTL timer expiration. |
| 1.3.6.1.4.1.21296.1.2.30.6.1.1.6 | ColumnlldpPortStatisticsTotalDiscardedFrames | read-only | current | A count of all LLDPDUs received and then discarded. |
| 1.3.6.1.4.1.21296.1.2.30.6.1.1.7 | ColumnlldpPortStatisticsErrorFrames | read-only | current | A count of all LLDPDUs received at the port with one or more detectable errors. |
| 1.3.6.1.4.1.21296.1.2.30.6.1.1.8 | ColumnlldpPortStatisticsTotalFramesIn | read-only | current | A count of all LLDP frames received at the port. |
| 1.3.6.1.4.1.21296.1.2.30.6.1.1.9 | ColumnlldpPortStatisticsTotalFramesOut | read-only | current | A count of all LLDP frames transmitted through the port. |
| 1.3.6.1.4.1.21296.1.2.30.6.1.1.10 | ColumnlldpPortStatisticsTotalDiscardedTlvs | read-only | current | A count of all TLVs received at the port and discarded for any reason. |
| 1.3.6.1.4.1.21296.1.2.30.6.1.1.11 | ColumnlldpPortStatisticsTotalUnrecognizedTlvs | read-only | current | This counter provides a count of all TLVs not recognized by the receiving LLDP local agent. |
| 1.3.6.1.4.1.21296.1.2.30.7 | Nodeicdp | |||
| 1.3.6.1.4.1.21296.1.2.30.7.1 | ScalaricdpGlobalSwitch | read-only | current | Global switch for ICDP. If disabled, inhibits further discovery using ICDP; however, existing data will be kept. default value :true |
| 1.3.6.1.4.1.21296.1.2.30.8 | NodecarrierNeighbor | |||
| 1.3.6.1.4.1.21296.1.2.30.8.1 | TablecarrierNeighborTable | not-accessible | current | Neighbor node discovered by the local-carrier via ICDP. This information is kept indefinitely, until the carrier is deleted, or the data is manually cleared by… |
| 1.3.6.1.4.1.21296.1.2.30.8.1.1 | RowcarrierNeighborEntry | not-accessible | current | Entry of carrierNeighborTable |
| 1.3.6.1.4.1.21296.1.2.30.8.1.1.1 | ColumncarrierNeighborLocalCarrier | read-only | current | Local carrier instance that has discovered this neighbor node. Each carrier can discover up to one node. It is possible for multiple collocated carriers to dis… |
| 1.3.6.1.4.1.21296.1.2.30.8.1.1.2 | ColumncarrierNeighborLastUpdate | read-only | current | Timestamp with the last time this neighbor info was updated. |
| 1.3.6.1.4.1.21296.1.2.30.8.1.1.3 | ColumncarrierNeighborAge | read-only | current | Number of seconds since discovery. UNITS:seconds |
| 1.3.6.1.4.1.21296.1.2.30.8.1.1.4 | ColumncarrierNeighborLocalCarrierId | read-only | current | AID of local carrier. |
| 1.3.6.1.4.1.21296.1.2.30.8.1.1.5 | ColumncarrierNeighborNeId | read-only | current | The reply will be truncated in 128 bytes. Id of the remote network element. |
| 1.3.6.1.4.1.21296.1.2.30.8.1.1.6 | ColumncarrierNeighborNeType | read-only | current | Type of the remote network element. |
| 1.3.6.1.4.1.21296.1.2.30.8.1.1.7 | ColumncarrierNeighborRemoteCarrierId | read-only | current | AID of the remote carrier connected to the local carrier. Implies a specific remote port id. |
| 1.3.6.1.4.1.21296.1.2.30.8.1.1.8 | ColumncarrierNeighborIpv4LoopbackAddress | read-only | current | IPv4 loopback address of the neighbor; may be empty if not configured. |
| 1.3.6.1.4.1.21296.1.2.30.8.1.1.9 | ColumncarrierNeighborIpv6LoopbackAddress | read-only | current | IPv6 loopback address of the neighbor; may be empty if not configured. |
| 1.3.6.1.4.1.21296.1.2.30.8.1.1.10 | ColumncarrierNeighborNeName | read-only | current | The reply will be truncated in 128 bytes. Neighbor ne-name. |
| 1.3.6.1.4.1.21296.1.2.30.9 | Nodeinci | |||
| 1.3.6.1.4.1.21296.1.2.30.9.1 | ScalarinciEnabled | read-only | current | This is a NE level switch to control the INCI feature. default value :false |
| 1.3.6.1.4.1.21296.1.2.30.10 | NodeinciNeighbor | |||
| 1.3.6.1.4.1.21296.1.2.30.10.1 | TableinciNeighborTable | not-accessible | current | List of provisioned INCI Neighbors. |
| 1.3.6.1.4.1.21296.1.2.30.10.1.1 | RowinciNeighborEntry | not-accessible | current | Entry of inciNeighborTable |
| 1.3.6.1.4.1.21296.1.2.30.10.1.1.1 | ColumninciNeighborNeighborId | read-only | current | Node-ID of provisioned neighbor. |
| 1.3.6.1.4.1.21296.1.2.30.10.1.1.2 | ColumninciNeighborNeighborAddress | read-only | current | IP address of the provisioned remote neighbor NE. |
| 1.3.6.1.4.1.21296.1.2.30.10.1.1.3 | ColumninciNeighborNeighborPort | read-only | current | Port number used for communication with GX NE. default value :8800 |
| 1.3.6.1.4.1.21296.1.2.30.10.1.1.4 | ColumninciNeighborConnectionStatus | read-only | current | Connection status with this Neighbor. default value :not-connected |
| 1.3.6.1.4.1.21296.1.2.30.10.1.1.5 | ColumninciNeighborConfiguredNodeName | read-only | current | User provisioned name of remote NE. Used to compare against the discovered-node-name. |
| 1.3.6.1.4.1.21296.1.2.30.10.1.1.6 | ColumninciNeighborDiscoveredNodeName | read-only | current | Name of remote NE as sent by the remote NE. |
| 1.3.6.1.4.1.21296.1.2.30.10.1.1.7 | ColumninciNeighborDiscoveredNodeId | read-only | current | Node ID of remote node as received from remote node. |
| 1.3.6.1.4.1.21296.1.2.30.10.1.1.8 | ColumninciNeighborAlarmReportControl | read-only | current | Controls the reporting of alarms for this particular object. default value :allowed |
| 1.3.6.1.4.1.21296.1.2.30.10.1.1.9 | ColumninciNeighborOperState | read-only | current | The operational state of this object. default value :disabled |
| 1.3.6.1.4.1.21296.1.2.30.10.1.1.10 | ColumninciNeighborLabel | read-only | current | The reply will be truncated in 128 bytes. User label. |
| 1.3.6.1.4.1.21296.1.2.30.12 | NodefiberConnection | |||
| 1.3.6.1.4.1.21296.1.2.30.12.1 | TablefiberConnectionTable | not-accessible | current | Fiber Connection list - connecting two ports of L0 cards, or line-port of Transponders/ Muxponders. |
| 1.3.6.1.4.1.21296.1.2.30.12.1.1 | RowfiberConnectionEntry | not-accessible | current | Entry of fiberConnectionTable |
| 1.3.6.1.4.1.21296.1.2.30.12.1.1.1 | ColumnfiberConnectionName | read-only | current | User defined name for the fiber-connection. |
| 1.3.6.1.4.1.21296.1.2.30.12.1.1.2 | ColumnfiberConnectionLabel | read-only | current | The reply will be truncated in 128 bytes. User label. |
| 1.3.6.1.4.1.21296.1.2.30.12.1.1.3 | ColumnfiberConnectionSrcPort | read-only | current | Source Port instance. |
| 1.3.6.1.4.1.21296.1.2.30.12.1.1.4 | ColumnfiberConnectionDstPort | read-only | current | Destination Port instance. |
| 1.3.6.1.4.1.21296.1.2.30.12.1.1.5 | ColumnfiberConnectionType | read-only | current | Type of the fiber connection - one-way or two-way. default value :two-way |
| 1.3.6.1.4.1.21296.1.2.30.13 | NodeexternalFiberConnection | |||
| 1.3.6.1.4.1.21296.1.2.30.13.1 | TableexternalFiberConnectionTable | not-accessible | current | External Fiber Connection name - connecting two ports of L0 cards in different NEs. |
| 1.3.6.1.4.1.21296.1.2.30.13.1.1 | RowexternalFiberConnectionEntry | not-accessible | current | Entry of externalFiberConnectionTable |
| 1.3.6.1.4.1.21296.1.2.30.13.1.1.1 | ColumnexternalFiberConnectionName | read-only | current | User defined name for the fiber-connection. |
| 1.3.6.1.4.1.21296.1.2.30.13.1.1.2 | ColumnexternalFiberConnectionLabel | read-only | current | The reply will be truncated in 128 bytes. User label. |
| 1.3.6.1.4.1.21296.1.2.30.13.1.1.3 | ColumnexternalFiberConnectionSrcNodeId | read-only | current | The reply will be truncated in 128 bytes. Should be logically the same as 'ne-name', although there is no SYSTEM business logic to correct this. |
| 1.3.6.1.4.1.21296.1.2.30.13.1.1.4 | ColumnexternalFiberConnectionSrcCardName | read-only | current | Card identification. |
| 1.3.6.1.4.1.21296.1.2.30.13.1.1.5 | ColumnexternalFiberConnectionSrcPortName | read-only | current | Port identification, as used by managers. |
| 1.3.6.1.4.1.21296.1.2.30.13.1.1.6 | ColumnexternalFiberConnectionDstNodeId | read-only | current | The reply will be truncated in 128 bytes. Should be logically the same as 'ne-name', although there is no SYSTEM business logic to correct this. |
| 1.3.6.1.4.1.21296.1.2.30.13.1.1.7 | ColumnexternalFiberConnectionDstCardName | read-only | current | Card identification. |
| 1.3.6.1.4.1.21296.1.2.30.13.1.1.8 | ColumnexternalFiberConnectionDstPortName | read-only | current | Port identification, as used by managers. |
| 1.3.6.1.4.1.21296.1.2.30.13.1.1.9 | ColumnexternalFiberConnectionFiberConnectionType | read-only | current | Type of the fiber connection - one-way or two-way. default value :two-way |
| 1.3.6.1.4.1.21296.1.2.30.13.1.1.10 | ColumnexternalFiberConnectionScope | read-only | current | Represents the scope of the external-fiber-connection - general-purpose use or extended for use by cable-id functionality default value :general-purpose |
| 1.3.6.1.4.1.21296.1.2.30.14 | NodenctConnection | |||
| 1.3.6.1.4.1.21296.1.2.30.14.1 | TablenctConnectionTable | not-accessible | current | NCT connectivity information, providing existing links between NCT ports in a multi-chassis NE. These links are dynamically filled in by the system, allowing t… |
| 1.3.6.1.4.1.21296.1.2.30.14.1.1 | RownctConnectionEntry | not-accessible | current | Entry of nctConnectionTable |
| 1.3.6.1.4.1.21296.1.2.30.14.1.1.1 | ColumnnctConnectionSrcPort | read-only | current | The source port of the connection. Must be an NCT port. If the port belongs to a commissioned chassis, it will be the AID of the port. If the port belongs to a… |
| 1.3.6.1.4.1.21296.1.2.30.14.1.1.2 | ColumnnctConnectionDstPort | read-only | current | The destination port of the connection. Must be an NCT port. If the port belongs to a commissioned chassis, it will be the AID of the port. If the port belongs… |
| 1.3.6.1.4.1.21296.1.2.30.14.1.1.3 | ColumnnctConnectionSrcChassis | read-only | current | The identifier of the chassis where the source port is located. If it is a commissioned chassis, it will be the AID of the chassis. If it is an unprovisioned c… |
| 1.3.6.1.4.1.21296.1.2.30.14.1.1.4 | ColumnnctConnectionDstChassis | read-only | current | The identifier of the chassis where the destination port is located. If it is a commissioned chassis, it will be the AID of the chassis. If it is an unprovisio… |
| 1.3.6.1.4.1.21296.1.2.30.14.1.1.5 | ColumnnctConnectionSrcChassisState | read-only | current | The state of the src-chassis. |
| 1.3.6.1.4.1.21296.1.2.30.14.1.1.6 | ColumnnctConnectionDstChassisState | read-only | current | The state of the dst-chassis. |
| 1.3.6.1.4.1.21296.1.2.30.15 | Nodesndp | |||
| 1.3.6.1.4.1.21296.1.2.30.15.1 | ScalarsndpEnabled | read-only | current | This is a switch to control the sndp feature. default value :true |
| 1.3.6.1.4.1.21296.1.2.30.16 | NodeinterfaceNeighbor | |||
| 1.3.6.1.4.1.21296.1.2.30.16.1 | TableinterfaceNeighborTable | not-accessible | current | List of provisioned Neighbors. |
| 1.3.6.1.4.1.21296.1.2.30.16.1.1 | RowinterfaceNeighborEntry | not-accessible | current | Entry of interfaceNeighborTable |
| 1.3.6.1.4.1.21296.1.2.30.16.1.1.1 | ColumninterfaceNeighborLocalInterface | read-only | current | Name of the interface neighbor. |
| 1.3.6.1.4.1.21296.1.2.30.16.1.1.2 | ColumninterfaceNeighborAssociatedCommChannel | read-only | current | Associated communication channel of provisioned neighbor. |
| 1.3.6.1.4.1.21296.1.2.30.16.1.1.3 | ColumninterfaceNeighborDiscoveryCycleTime | read-only | current | Periodicity at which sndp discover messages will be sent. UNITS:seconds default value :30 |
| 1.3.6.1.4.1.21296.1.2.30.16.1.1.4 | ColumninterfaceNeighborDiscoveryTimeout | read-only | current | Time after which discovery is considered as failed; when this timeout occurs, neighbor-adjacency state will transition to blackout. UNITS:seconds default value… |
| 1.3.6.1.4.1.21296.1.2.30.16.1.1.5 | ColumninterfaceNeighborDiscoveryEnabled | read-only | current | It is a switch to enable or disable discovery on the local interface. default value :true |
| 1.3.6.1.4.1.21296.1.2.30.16.1.1.6 | ColumninterfaceNeighborNeighborAdjacencyState | read-only | current | Indicates protocol state. default value :unknown |
| 1.3.6.1.4.1.21296.1.2.30.16.1.1.7 | ColumninterfaceNeighborNeighborNeId | read-only | current | The reply will be truncated in 128 bytes. Indicates discovered neighbor ne ID. |
| 1.3.6.1.4.1.21296.1.2.30.16.1.1.8 | ColumninterfaceNeighborNeighborNeName | read-only | current | The reply will be truncated in 128 bytes. Indicates discovered neighbor ne name. |
| 1.3.6.1.4.1.21296.1.2.30.16.1.1.9 | ColumninterfaceNeighborNeighborInterfaceName | read-only | current | Indicates discovered neighbor interface name. |
| 1.3.6.1.4.1.21296.1.2.30.16.1.1.10 | ColumninterfaceNeighborNeighborRouterId | read-only | current | Indicates discovered neighbor router ID. |
| 1.3.6.1.4.1.21296.1.2.30.16.1.1.11 | ColumninterfaceNeighborNeighborIpv4Address | read-only | current | Indicates discovered neighbor ipv4 address. |
| 1.3.6.1.4.1.21296.1.2.30.16.1.1.12 | ColumninterfaceNeighborNeighborIpv6Address | read-only | current | Indicates discoverd neighbor ipv6 address. |
| 1.3.6.1.4.1.21296.1.2.30.16.1.1.13 | ColumninterfaceNeighborLastChangeTime | read-only | current | Provide a timestamp indicating when the interface neighbor information was last updated. |
| 1.3.6.1.4.1.21296.1.2.30.16.1.1.14 | ColumninterfaceNeighborAlarmReportControl | read-only | current | Controls the reporting of alarms for this particular object. default value :allowed |
| 1.3.6.1.4.1.21296.1.2.30.16.1.1.15 | ColumninterfaceNeighborLabel | read-only | current | The reply will be truncated in 128 bytes. User label. |
| 1.3.6.1.4.1.21296.1.2.30.16.1.1.16 | ColumninterfaceNeighborOperState | read-only | current | The operational state of interface-neighbor object. default value :disabled |
| 1.3.6.1.4.1.21296.1.2.30.16.1.1.17 | ColumninterfaceNeighborAID | read-only | current | Resource Access Identifier (AID). Identifies an instance within a specific resource type. |
| 1.3.6.1.4.1.21296.1.2.30.17 | NodelldpLocalInfo | |||
| 1.3.6.1.4.1.21296.1.2.30.17.1 | TablelldpLocalInfoTable | not-accessible | current | LLDP local system information sent on lldp-port. |
| 1.3.6.1.4.1.21296.1.2.30.17.1.1 | RowlldpLocalInfoEntry | not-accessible | current | Entry of lldpLocalInfoTable |
| 1.3.6.1.4.1.21296.1.2.30.17.1.1.1 | ColumnlldpLocalInfoLldpPort | read-only | current | Local port on which lldp is enabled. |
| 1.3.6.1.4.1.21296.1.2.30.17.1.1.2 | ColumnlldpLocalInfoChassisIdSubtype | read-only | current | This attribute describes the format of the chassis-id string. |
| 1.3.6.1.4.1.21296.1.2.30.17.1.1.3 | ColumnlldpLocalInfoChassisId | read-only | current | The reply will be truncated in 128 bytes. This attribute identifies the chassis component withing the LLDP remote system.. This value needs to be interpreted a… |
| 1.3.6.1.4.1.21296.1.2.30.17.1.1.4 | ColumnlldpLocalInfoPortIdSubtype | read-only | current | This attribute describes the format of the port-id string. |
| 1.3.6.1.4.1.21296.1.2.30.17.1.1.5 | ColumnlldpLocalInfoPortId | read-only | current | The reply will be truncated in 128 bytes. This attribute identifies the port within the LLDP remote system chassis. This value needs to be interpreted accordin… |
| 1.3.6.1.4.1.21296.1.2.30.17.1.1.6 | ColumnlldpLocalInfoPortDescription | read-only | current | The reply will be truncated in 128 bytes. The string value used to identify the description of the given port associated with the remote system. |
| 1.3.6.1.4.1.21296.1.2.30.17.1.1.7 | ColumnlldpLocalInfoSystemName | read-only | current | The reply will be truncated in 128 bytes. The string value used to identify the system name of the remote system. |
| 1.3.6.1.4.1.21296.1.2.30.17.1.1.8 | ColumnlldpLocalInfoSystemDescription | read-only | current | The reply will be truncated in 128 bytes. The string value used to identify the system description of the remote system. |
| 1.3.6.1.4.1.21296.1.2.30.17.1.1.9 | ColumnlldpLocalInfoSupportedCapabilities | read-only | current | This attribute describes the remote system supported capabilities. |
| 1.3.6.1.4.1.21296.1.2.30.17.1.1.10 | ColumnlldpLocalInfoEnabledCapabilities | read-only | current | This attribute describes the remote system enabled capabilities. |
| 1.3.6.1.4.1.21296.1.2.30.18 | NodemanagementAddressLocal | |||
| 1.3.6.1.4.1.21296.1.2.30.18.1 | TablemanagementAddressLocalTable | not-accessible | current | Management address information about a particular chassis component. There may be multiple management addresses configured on the remote system identified by a… |
| 1.3.6.1.4.1.21296.1.2.30.18.1.1 | RowmanagementAddressLocalEntry | not-accessible | current | Entry of managementAddressLocalTable |
| 1.3.6.1.4.1.21296.1.2.30.18.1.1.1 | ColumnmanagementAddressLocalAddressSubtype | read-only | current | The type of management address identifier encoding used in the associated 'address' attribute. |
| 1.3.6.1.4.1.21296.1.2.30.18.1.1.2 | ColumnmanagementAddressLocalAddress | read-only | current | The string value used to identify the management address component associated with the remote system. The purpose of this address is to contact the management … |
| 1.3.6.1.4.1.21296.1.2.30.18.1.1.3 | ColumnmanagementAddressLocalIfSubtype | read-only | current | This attribute describes the basis of a particular type of interface associated with the management address. |
| 1.3.6.1.4.1.21296.1.2.30.18.1.1.4 | ColumnmanagementAddressLocalIfId | read-only | current | The integer value used to identify the interface number regarding the management address component associated with the remote system. |
| 1.3.6.1.4.1.21296.1.2.30.18.1.1.5 | ColumnmanagementAddressLocalAddressOid | read-only | current | The Object Identifier (OID) value used to identify the type of hardware component or protocol entity associated with the management address advertised by the r… |
| 1.3.6.1.4.1.21296.1.2.30.20 | NodecableIdStatus | |||
| 1.3.6.1.4.1.21296.1.2.30.20.1 | ScalarcableIdStatusCableIdState | read-only | current | Display the cable-id state. default value :idle |
| 1.3.6.1.4.1.21296.1.2.30.20.2 | ScalarcableIdStatusTestProgress | read-only | current | The reply will be truncated in 128 bytes. Display the cable-id test progress. default value :Not applicable |
| 1.3.6.1.4.1.21296.1.2.30.22 | NodesupportingFiberConnection | |||
| 1.3.6.1.4.1.21296.1.2.30.22.1 | TablesupportingFiberConnectionTable | not-accessible | current | Container for Supported fiber connection path. |
| 1.3.6.1.4.1.21296.1.2.30.22.1.1 | RowsupportingFiberConnectionEntry | not-accessible | current | Entry of supportingFiberConnectionTable |
| 1.3.6.1.4.1.21296.1.2.30.22.1.1.1 | ColumnsupportingFiberConnectionFiberConnectionList | read-only | current | Supported fiber connection path.This is originally a YANG leaf-list, here encoded as a comma separated list of values. |
| 1.3.6.1.4.1.21296.1.2.30.23 | NodesubmarineLink | |||
| 1.3.6.1.4.1.21296.1.2.30.23.1 | TablesubmarineLinkTable | not-accessible | current | Submarine link topology including Branching Units (BU) and subsea link parameters. |
| 1.3.6.1.4.1.21296.1.2.30.23.1.1 | RowsubmarineLinkEntry | not-accessible | current | Entry of submarineLinkTable |
| 1.3.6.1.4.1.21296.1.2.30.23.1.1.1 | ColumnsubmarineLinkName | read-only | current | User defined name for the subsea link topology. |
| 1.3.6.1.4.1.21296.1.2.30.23.1.1.2 | ColumnsubmarineLinkLabel | read-only | current | The reply will be truncated in 128 bytes. User label. |
| 1.3.6.1.4.1.21296.1.2.30.23.1.1.3 | ColumnsubmarineLinkSrcNodeId | read-only | current | The reply will be truncated in 128 bytes. Should be logically the same as 'ne-name', although this is not enforced. Note that in a subsea topology the same src… |
| 1.3.6.1.4.1.21296.1.2.30.23.1.1.4 | ColumnsubmarineLinkSrcCardName | read-only | current | Card identification. |
| 1.3.6.1.4.1.21296.1.2.30.23.1.1.5 | ColumnsubmarineLinkSrcPortName | read-only | current | Port identification, as used by managers. |
| 1.3.6.1.4.1.21296.1.2.30.23.1.1.6 | ColumnsubmarineLinkDstNodeId | read-only | current | The reply will be truncated in 128 bytes. Should be logically the same as 'ne-name', although this is not enforced. |
| 1.3.6.1.4.1.21296.1.2.30.23.1.1.7 | ColumnsubmarineLinkDstCardName | read-only | current | Card identification. |
| 1.3.6.1.4.1.21296.1.2.30.23.1.1.8 | ColumnsubmarineLinkDstPortName | read-only | current | Port identification, as used by managers. |
| 1.3.6.1.4.1.21296.1.2.30.23.1.1.9 | ColumnsubmarineLinkFiberConnectionType | read-only | current | Type of the fiber connection - one-way or two-way. default value :two-way |
| 1.3.6.1.4.1.21296.1.2.30.23.1.1.10 | ColumnsubmarineLinkFiberPairId | read-only | current | The fiber pair identifier associated with the link. |
| 1.3.6.1.4.1.21296.1.2.30.23.1.1.11 | ColumnsubmarineLinkFiberLength | read-only | current | Defines the fiber length of the associated fiber pair ID. This does not include the length of the branch segments. UNITS:km default value :0 |
| 1.3.6.1.4.1.21296.1.2.30.23.1.1.12 | ColumnsubmarineLinkSegmentList | read-only | current | The reply will be truncated in 128 bytes. Defines the list of fiber segments that constitute the link. |
| 1.3.6.1.4.1.21296.1.2.30.23.1.1.13 | ColumnsubmarineLinkBuSegmentIndex | read-only | current | Defines the index of the segment location associated to the BU. |
| 1.3.6.1.4.1.21296.1.2.30.23.1.1.14 | ColumnsubmarineLinkRxFiberType | read-only | current | The Rx fiber type on the DWDM Line for the link. |
| 1.3.6.1.4.1.21296.1.2.30.23.1.1.15 | ColumnsubmarineLinkTxFiberType | read-only | current | The Tx fiber type on the DWDM Line for the link. |
| 1.3.6.1.4.1.21296.1.2.30.23.1.1.16 | ColumnsubmarineLinkGsnr | read-only | current | Expected GSNR for the link. UNITS:dB |
| 1.3.6.1.4.1.21296.1.2.30.23.1.1.17 | ColumnsubmarineLinkDegreeTargetTxPower | read-only | current | The target Tx power for the degree. |
| 1.3.6.1.4.1.21296.1.2.30.23.1.1.18 | ColumnsubmarineLinkDegreeExpectedRxPower | read-only | current | The target Rx power for the degree. |
| 1.3.6.1.4.1.21296.1.2.30.23.1.1.19 | ColumnsubmarineLinkAllocatedSpectrumList | read-only | current | Allocated spectrum blocks for the link configured as a set of start frequency, end frequency pairs.This is originally a YANG leaf-list, here encoded as a comma… |
| 1.3.6.1.4.1.21296.1.2.30.23.1.1.20 | ColumnsubmarineLinkLinkName | read-only | current | The reply will be truncated in 128 bytes. The name of the submarine link. |
| 1.3.6.1.4.1.21296.1.2.30.23.1.1.21 | ColumnsubmarineLinkCommissioningSnrMargin | read-only | current | SNR margin at the time of commissioning. UNITS:dB |
| 1.3.6.1.4.1.21296.1.2.30.23.1.1.22 | ColumnsubmarineLinkLaunchCondition | read-only | current | Defines the launch option for the Tx pre-emphasis. default value :pfib |
| 1.3.6.1.4.1.21296.1.2.30.25 | NodecableIdPath | |||
| 1.3.6.1.4.1.21296.1.2.30.25.1 | TablecableIdPathTable | not-accessible | current | Display cable path status. |
| 1.3.6.1.4.1.21296.1.2.30.25.1.1 | RowcableIdPathEntry | not-accessible | current | Entry of cableIdPathTable |
| 1.3.6.1.4.1.21296.1.2.30.25.1.1.1 | ColumncableIdPathName | read-only | current | The reply will be truncated in 128 bytes. cable-id result name. |
| 1.3.6.1.4.1.21296.1.2.30.25.1.1.2 | ColumncableIdPathCardTypeA | read-only | current | card type of end A |
| 1.3.6.1.4.1.21296.1.2.30.25.1.1.3 | ColumncableIdPathPortA | read-only | current | port instance of end A |
| 1.3.6.1.4.1.21296.1.2.30.25.1.1.4 | ColumncableIdPathCardTypeZ | read-only | current | card type of end Z |
| 1.3.6.1.4.1.21296.1.2.30.25.1.1.5 | ColumncableIdPathPortZ | read-only | current | port instance of end Z |
| 1.3.6.1.4.1.21296.1.2.30.25.1.1.6 | ColumncableIdPathPortAToPortZPathStatus | read-only | current | Display the protection path status for endpoints A-Z. default value :disabled |
| 1.3.6.1.4.1.21296.1.2.30.25.1.1.7 | ColumncableIdPathPortZToPortAPathStatus | read-only | current | Display the protection path status for endpoints A-Z. default value :disabled |
| 1.3.6.1.4.1.21296.1.2.30.25.1.1.8 | ColumncableIdPathPortAToPortZLastTestStatus | read-only | current | Display the cable id test results for endpoints A-Z. |
| 1.3.6.1.4.1.21296.1.2.30.25.1.1.9 | ColumncableIdPathPortZToPortALastTestStatus | read-only | current | Display the cable id test results for endpoints A-Z. |
| 1.3.6.1.4.1.21296.1.2.30.25.1.1.10 | ColumncableIdPathCurrentState | read-only | current | Display the cable-id state. default value :idle |
| 1.3.6.1.4.1.21296.1.2.30.25.1.1.11 | ColumncableIdPathLastTestQualifier | read-only | current | Display last test status. default value :up-to-date |
| 1.3.6.1.4.1.21296.1.2.30.25.1.1.12 | ColumncableIdPathLastTestTimestamp | read-only | current | Timestamp for the last cable-id verification for the port pair. |
| 1.3.6.1.4.1.21296.1.2.30.25.1.1.13 | ColumncableIdPathAdditionalInfo | read-only | current | The reply will be truncated in 128 bytes. Additional information. |
| 1.3.6.1.4.1.21296.1.2.30.27 | NodeautoDNeighbor | |||
| 1.3.6.1.4.1.21296.1.2.30.27.1 | TableautoDNeighborTable | not-accessible | current | List of discovered neighbors. |
| 1.3.6.1.4.1.21296.1.2.30.27.1.1 | RowautoDNeighborEntry | not-accessible | current | Entry of autoDNeighborTable |
| 1.3.6.1.4.1.21296.1.2.30.27.1.1.1 | ColumnautoDNeighborLocalPortId | read-only | current | The local port associated with the discovered neighbor. |
| 1.3.6.1.4.1.21296.1.2.30.27.1.1.2 | ColumnautoDNeighborDiscoveredNeId | read-only | current | The reply will be truncated in 128 bytes. Contains the ne-id parameter of the discovered neighbor. |
| 1.3.6.1.4.1.21296.1.2.30.27.1.1.3 | ColumnautoDNeighborDiscoveredPortId | read-only | current | AID of the line port of the discovered neighbor. |
| 1.3.6.1.4.1.21296.1.2.32 | Nodepm | |||
| 1.3.6.1.4.1.21296.1.2.32.3 | NoderealTimePm | |||
| 1.3.6.1.4.1.21296.1.2.32.3.1 | TablerealTimePmTable | not-accessible | current | Individual real-time-pm record. Contains data updated continuously in real-time. |
| 1.3.6.1.4.1.21296.1.2.32.3.1.1 | RowrealTimePmEntry | not-accessible | current | Entry of realTimePmTable |
| 1.3.6.1.4.1.21296.1.2.32.3.1.1.1 | ColumnrealTimePmResource | read-only | current | Existing system resource. |
| 1.3.6.1.4.1.21296.1.2.32.3.1.1.2 | ColumnrealTimePmResourceType | read-only | current | Type of resource. |
| 1.3.6.1.4.1.21296.1.2.32.3.1.1.3 | ColumnrealTimePmAID | read-only | current | Resource Access Identifier (AID). Identifies an instance within a specific resource type. |
| 1.3.6.1.4.1.21296.1.2.32.3.1.1.4 | ColumnrealTimePmParameter | read-only | current | PM parameter identifier (can be a counter or a gauge). |
| 1.3.6.1.4.1.21296.1.2.32.3.1.1.5 | ColumnrealTimePmDirection | read-only | current | PM parameter direction. |
| 1.3.6.1.4.1.21296.1.2.32.3.1.1.6 | ColumnrealTimePmLocation | read-only | current | PM parameter location. |
| 1.3.6.1.4.1.21296.1.2.32.3.1.1.7 | ColumnrealTimePmPmValue | read-only | current | PM parameter value. Provided for real-time PM and counters. |
| 1.3.6.1.4.1.21296.1.2.32.3.1.1.8 | ColumnrealTimePmPmValueMin | read-only | current | PM parameter minimum value. Provided for gauges. |
| 1.3.6.1.4.1.21296.1.2.32.3.1.1.9 | ColumnrealTimePmPmValueMax | read-only | current | PM parameter maximum value. Provided for gauges. |
| 1.3.6.1.4.1.21296.1.2.32.3.1.1.10 | ColumnrealTimePmPmValueAvg | read-only | current | PM parameter average value. Provided for gauges. |
| 1.3.6.1.4.1.21296.1.2.32.3.1.1.11 | ColumnrealTimePmPmUnit | read-only | current | Unit of the PM parameter value. |
| 1.3.6.1.4.1.21296.1.2.32.5 | NodecurrentPm | |||
| 1.3.6.1.4.1.21296.1.2.32.5.1 | TablecurrentPmTable | not-accessible | current | Individual current-pm record. Contains the current bin being counted (bin zero). |
| 1.3.6.1.4.1.21296.1.2.32.5.1.1 | RowcurrentPmEntry | not-accessible | current | Entry of currentPmTable |
| 1.3.6.1.4.1.21296.1.2.32.5.1.1.1 | ColumncurrentPmPeriod | read-only | current | Time period for PM data. |
| 1.3.6.1.4.1.21296.1.2.32.5.1.1.2 | ColumncurrentPmMonitoringDateTime | read-only | current | Monitoring date and time that this data refers to. For real-time and current PM, it represents the start time of the PM data collection. For history PM, it rep… |
| 1.3.6.1.4.1.21296.1.2.32.5.1.1.3 | ColumncurrentPmResource | read-only | current | Existing system resource. |
| 1.3.6.1.4.1.21296.1.2.32.5.1.1.4 | ColumncurrentPmResourceType | read-only | current | Type of resource. |
| 1.3.6.1.4.1.21296.1.2.32.5.1.1.5 | ColumncurrentPmAID | read-only | current | Resource Access Identifier (AID). Identifies an instance within a specific resource type. |
| 1.3.6.1.4.1.21296.1.2.32.5.1.1.6 | ColumncurrentPmParameter | read-only | current | PM parameter identifier (can be a counter or a gauge). |
| 1.3.6.1.4.1.21296.1.2.32.5.1.1.7 | ColumncurrentPmDirection | read-only | current | PM parameter direction. |
| 1.3.6.1.4.1.21296.1.2.32.5.1.1.8 | ColumncurrentPmLocation | read-only | current | PM parameter location. |
| 1.3.6.1.4.1.21296.1.2.32.5.1.1.9 | ColumncurrentPmPmValue | read-only | current | PM parameter value. Provided for real-time PM and counters. |
| 1.3.6.1.4.1.21296.1.2.32.5.1.1.10 | ColumncurrentPmPmValueMin | read-only | current | PM parameter minimum value. Provided for gauges. |
| 1.3.6.1.4.1.21296.1.2.32.5.1.1.11 | ColumncurrentPmPmValueMax | read-only | current | PM parameter maximum value. Provided for gauges. |
| 1.3.6.1.4.1.21296.1.2.32.5.1.1.12 | ColumncurrentPmPmValueAvg | read-only | current | PM parameter average value. Provided for gauges. |
| 1.3.6.1.4.1.21296.1.2.32.5.1.1.13 | ColumncurrentPmPmUnit | read-only | current | Unit of the PM parameter value. |
| 1.3.6.1.4.1.21296.1.2.32.5.1.1.14 | ColumncurrentPmValidity | read-only | current | PM parameter validity. |
| 1.3.6.1.4.1.21296.1.2.32.7 | NodehistoryPm | |||
| 1.3.6.1.4.1.21296.1.2.32.7.1 | TablehistoryPmTable | not-accessible | current | Individual history-pm record. Contains performance bins (history records) stored in the system. |
| 1.3.6.1.4.1.21296.1.2.32.7.1.1 | RowhistoryPmEntry | not-accessible | current | Entry of historyPmTable |
| 1.3.6.1.4.1.21296.1.2.32.7.1.1.1 | ColumnhistoryPmPeriod | read-only | current | Time period for PM data. |
| 1.3.6.1.4.1.21296.1.2.32.7.1.1.2 | ColumnhistoryPmMonitoringDateTime | read-only | current | Monitoring date and time that this data refers to. For real-time and current PM, it represents the start time of the PM data collection. For history PM, it rep… |
| 1.3.6.1.4.1.21296.1.2.32.7.1.1.3 | ColumnhistoryPmResource | read-only | current | Existing system resource. |
| 1.3.6.1.4.1.21296.1.2.32.7.1.1.4 | ColumnhistoryPmResourceType | read-only | current | Type of resource. |
| 1.3.6.1.4.1.21296.1.2.32.7.1.1.5 | ColumnhistoryPmAID | read-only | current | Resource Access Identifier (AID). Identifies an instance within a specific resource type. |
| 1.3.6.1.4.1.21296.1.2.32.7.1.1.6 | ColumnhistoryPmParameter | read-only | current | PM parameter identifier (can be a counter or a gauge). |
| 1.3.6.1.4.1.21296.1.2.32.7.1.1.7 | ColumnhistoryPmDirection | read-only | current | PM parameter direction. |
| 1.3.6.1.4.1.21296.1.2.32.7.1.1.8 | ColumnhistoryPmLocation | read-only | current | PM parameter location. |
| 1.3.6.1.4.1.21296.1.2.32.7.1.1.9 | ColumnhistoryPmPmValue | read-only | current | PM parameter value. Provided for real-time PM and counters. |
| 1.3.6.1.4.1.21296.1.2.32.7.1.1.10 | ColumnhistoryPmPmValueMin | read-only | current | PM parameter minimum value. Provided for gauges. |
| 1.3.6.1.4.1.21296.1.2.32.7.1.1.11 | ColumnhistoryPmPmValueMax | read-only | current | PM parameter maximum value. Provided for gauges. |
| 1.3.6.1.4.1.21296.1.2.32.7.1.1.12 | ColumnhistoryPmPmValueAvg | read-only | current | PM parameter average value. Provided for gauges. |
| 1.3.6.1.4.1.21296.1.2.32.7.1.1.13 | ColumnhistoryPmPmUnit | read-only | current | Unit of the PM parameter value. |
| 1.3.6.1.4.1.21296.1.2.32.7.1.1.14 | ColumnhistoryPmValidity | read-only | current | PM parameter validity. |
| 1.3.6.1.4.1.21296.1.2.32.7.1.1.15 | ColumnhistoryPmBin | read-only | current | Bin number of history PM. Most recent bins have lowest numbers. |
| 1.3.6.1.4.1.21296.1.2.32.9 | NodepmResource | |||
| 1.3.6.1.4.1.21296.1.2.32.9.1 | TablepmResourceTable | not-accessible | current | PM configuration per resource instance. |
| 1.3.6.1.4.1.21296.1.2.32.9.1.1 | RowpmResourceEntry | not-accessible | current | Entry of pmResourceTable |
| 1.3.6.1.4.1.21296.1.2.32.9.1.1.1 | ColumnpmResourceResource | read-only | current | Existing system resource. |
| 1.3.6.1.4.1.21296.1.2.32.9.1.1.2 | ColumnpmResourceResourceType | read-only | current | Type of resource. |
| 1.3.6.1.4.1.21296.1.2.32.9.1.1.3 | ColumnpmResourceAID | read-only | current | Resource Access Identifier (AID). Identifies an instance within a specific resource type. |
| 1.3.6.1.4.1.21296.1.2.32.9.1.1.4 | ColumnpmResourceRealTimeSupervision | read-only | current | Real-time data supervision for this resource. default value :true |
| 1.3.6.1.4.1.21296.1.2.32.9.1.1.5 | ColumnpmResourceRealTimeDataLastReset | read-only | current | Date and time of the last real time data reset for this resource. If the data was never reset, this is the date and time of this resource's creation. |
| 1.3.6.1.4.1.21296.1.2.32.10 | NodepmControlENTR | |||
| 1.3.6.1.4.1.21296.1.2.32.10.1 | TablepmControlENTRTable | not-accessible | current | PM configuration for one particular resource, for one particular period, direction and location. |
| 1.3.6.1.4.1.21296.1.2.32.10.1.1 | RowpmControlENTREntry | not-accessible | current | Entry of pmControlENTRTable |
| 1.3.6.1.4.1.21296.1.2.32.10.1.1.1 | ColumnpmControlENTRPeriod | read-only | current | Time period for PM data. |
| 1.3.6.1.4.1.21296.1.2.32.10.1.1.2 | ColumnpmControlENTRDirection | read-only | current | PM parameter direction. |
| 1.3.6.1.4.1.21296.1.2.32.10.1.1.3 | ColumnpmControlENTRLocation | read-only | current | PM parameter location. |
| 1.3.6.1.4.1.21296.1.2.32.10.1.1.4 | ColumnpmControlENTRSupportedParameters | read-only | current | List of PM parameters that this resource type supports for this direction/location.This is originally a YANG leaf-list, here encoded as a comma separated list … |
| 1.3.6.1.4.1.21296.1.2.32.10.1.1.5 | ColumnpmControlENTRDataSupervision | read-only | current | PM data supervision for this resource. |
| 1.3.6.1.4.1.21296.1.2.32.10.1.1.6 | ColumnpmControlENTRTcaSupervision | read-only | current | TCA supervision for this resource. |
| 1.3.6.1.4.1.21296.1.2.32.11 | NodepmProfile | |||
| 1.3.6.1.4.1.21296.1.2.32.11.1 | ScalarpmProfileGlobalDataSupervision | read-only | current | This parameter provides a way to globally enable PM data-supervision without having to toggle it individually. default value :manual |
| 1.3.6.1.4.1.21296.1.2.32.12 | NodepmProfileENTR | |||
| 1.3.6.1.4.1.21296.1.2.32.12.1 | TablepmProfileENTRTable | not-accessible | current | PM configuration per resource type. |
| 1.3.6.1.4.1.21296.1.2.32.12.1.1 | RowpmProfileENTREntry | not-accessible | current | Entry of pmProfileENTRTable |
| 1.3.6.1.4.1.21296.1.2.32.12.1.1.1 | ColumnpmProfileENTRResourceType | read-only | current | Type of resource. |
| 1.3.6.1.4.1.21296.1.2.32.12.1.1.2 | ColumnpmProfileENTRPeriod | read-only | current | Time period for PM data. |
| 1.3.6.1.4.1.21296.1.2.32.12.1.1.3 | ColumnpmProfileENTRDirection | read-only | current | PM parameter direction. |
| 1.3.6.1.4.1.21296.1.2.32.12.1.1.4 | ColumnpmProfileENTRLocation | read-only | current | PM parameter location. |
| 1.3.6.1.4.1.21296.1.2.32.12.1.1.5 | ColumnpmProfileENTRDefaultDataSupervision | read-only | current | For newly created resources of this type, whether they have PM data supervision automatically enabled or not. |
| 1.3.6.1.4.1.21296.1.2.32.12.1.1.6 | ColumnpmProfileENTRDefaultTcaSupervision | read-only | current | For newly created resources of this type, whether they have PM threshold crossing supervision automatically enabled or not. Only on relevance for pm threshold … |
| 1.3.6.1.4.1.21296.1.2.32.13 | NodepmThresholdProfile | |||
| 1.3.6.1.4.1.21296.1.2.32.13.1 | TablepmThresholdProfileTable | not-accessible | current | PM configuration per parameter, for this resource type. |
| 1.3.6.1.4.1.21296.1.2.32.13.1.1 | RowpmThresholdProfileEntry | not-accessible | current | Entry of pmThresholdProfileTable |
| 1.3.6.1.4.1.21296.1.2.32.13.1.1.1 | ColumnpmThresholdProfileParameter | read-only | current | PM parameter identifier (can be a counter or a gauge). |
| 1.3.6.1.4.1.21296.1.2.32.13.1.1.2 | ColumnpmThresholdProfileLowThreshold | read-only | current | Configured low threshold value for resources that have this parameter. |
| 1.3.6.1.4.1.21296.1.2.32.13.1.1.3 | ColumnpmThresholdProfileHighThreshold | read-only | current | Configured high threshold value for resources that have this parameter. |
| 1.3.6.1.4.1.21296.1.2.32.13.1.1.4 | ColumnpmThresholdProfileDefaultLowThreshold | read-only | current | System defined default value for low threshold for this parameter. |
| 1.3.6.1.4.1.21296.1.2.32.13.1.1.5 | ColumnpmThresholdProfileDefaultHighThreshold | read-only | current | System defined default value for high threshold for this parameter. |
| 1.3.6.1.4.1.21296.1.2.32.13.1.1.6 | ColumnpmThresholdProfileMinValue | read-only | current | Minimum value for this parameter. |
| 1.3.6.1.4.1.21296.1.2.32.13.1.1.7 | ColumnpmThresholdProfileMaxValue | read-only | current | Maximum value for this parameter. |
| 1.3.6.1.4.1.21296.1.2.32.15 | NodepmParameter | |||
| 1.3.6.1.4.1.21296.1.2.32.15.1 | TablepmParameterTable | not-accessible | current | Catalog information for a single PM parameter. |
| 1.3.6.1.4.1.21296.1.2.32.15.1.1 | RowpmParameterEntry | not-accessible | current | Entry of pmParameterTable |
| 1.3.6.1.4.1.21296.1.2.32.15.1.1.1 | ColumnpmParameterParameter | read-only | current | PM parameter identifier (can be a counter or a gauge). |
| 1.3.6.1.4.1.21296.1.2.32.15.1.1.2 | ColumnpmParameterUnits | read-only | current | Units for this parameter. |
| 1.3.6.1.4.1.21296.1.2.32.15.1.1.3 | ColumnpmParameterType | read-only | current | Type of PM parameter, it can be either a counter or a gauge. |
| 1.3.6.1.4.1.21296.1.2.32.18 | NodepmThreshold | |||
| 1.3.6.1.4.1.21296.1.2.32.18.1 | TablepmThresholdTable | not-accessible | current | Per resource instance/parameter TCA threshold configuration. Needs to be explicitly created by the user, otherwise TCA configuration is done per resource-type … |
| 1.3.6.1.4.1.21296.1.2.32.18.1.1 | RowpmThresholdEntry | not-accessible | current | Entry of pmThresholdTable |
| 1.3.6.1.4.1.21296.1.2.32.18.1.1.1 | ColumnpmThresholdParameter | read-only | current | PM parameter identifier (can be a counter or a gauge). |
| 1.3.6.1.4.1.21296.1.2.32.18.1.1.2 | ColumnpmThresholdLowThreshold | read-only | current | Configured low threshold value for this parameter for this individual resource. |
| 1.3.6.1.4.1.21296.1.2.32.18.1.1.3 | ColumnpmThresholdHighThreshold | read-only | current | Configured high threshold value for this parameter for this individual resource. |
| 1.3.6.1.4.1.21296.1.2.33 | NodelinePtp | |||
| 1.3.6.1.4.1.21296.1.2.33.1 | NodelinePtpInfo | |||
| 1.3.6.1.4.1.21296.1.2.33.1.1 | TablelinePtpTable | not-accessible | current | Basic LinePTP facility. |
| 1.3.6.1.4.1.21296.1.2.33.1.1.1 | RowlinePtpEntry | not-accessible | current | Entry of linePtpTable |
| 1.3.6.1.4.1.21296.1.2.33.1.1.1.1 | ColumnlinePtpName | read-only | current | A generic, configurable name for every facility. |
| 1.3.6.1.4.1.21296.1.2.33.1.1.1.2 | ColumnlinePtpSupportingCard | read-only | current | Card that holds this facility |
| 1.3.6.1.4.1.21296.1.2.33.1.1.1.3 | ColumnlinePtpSupportingPort | read-only | current | Ports that hold this facilityThis is originally a YANG leaf-list, here encoded as a comma separated list of values. |
| 1.3.6.1.4.1.21296.1.2.33.1.1.1.4 | ColumnlinePtpSupportingFacilities | read-only | current | An XPath reference to the parent facilities.This is originally a YANG leaf-list, here encoded as a comma separated list of values. |
| 1.3.6.1.4.1.21296.1.2.33.1.1.1.5 | ColumnlinePtpSupportedFacilities | read-only | current | An XPath reference to the children facilities.This is originally a YANG leaf-list, here encoded as a comma separated list of values. |
| 1.3.6.1.4.1.21296.1.2.33.1.1.1.6 | ColumnlinePtpAID | read-only | current | Resource Access Identifier (AID). Identifies an instance within a specific resource type. |
| 1.3.6.1.4.1.21296.1.2.33.1.1.1.7 | ColumnlinePtpLabel | read-only | current | The reply will be truncated in 128 bytes. User label. |
| 1.3.6.1.4.1.21296.1.2.33.1.1.1.8 | ColumnlinePtpAdminState | read-only | current | The administrative state of the managed object. default value :unlock |
| 1.3.6.1.4.1.21296.1.2.33.1.1.1.9 | ColumnlinePtpOperState | read-only | current | The operational state of this object. default value :disabled |
| 1.3.6.1.4.1.21296.1.2.33.1.1.1.10 | ColumnlinePtpAvailState | read-only | current | Availability state of an entity. |
| 1.3.6.1.4.1.21296.1.2.33.1.1.1.11 | ColumnlinePtpManagedBy | read-only | current | Describes whether this managed entity was system created or not. Only user created entities can be user deleted. default value :system |
| 1.3.6.1.4.1.21296.1.2.33.1.1.1.12 | ColumnlinePtpAutoInServiceEnabled | read-only | current | Auto-in-service switch for this facility. default value :false |
| 1.3.6.1.4.1.21296.1.2.33.1.1.1.13 | ColumnlinePtpValidSignalTime | read-only | current | Configurable time that represents a detection of a valid signal. Used for auto-in-service mechanism. UNITS:minutes default value :480 |
| 1.3.6.1.4.1.21296.1.2.33.1.1.1.14 | ColumnlinePtpRemainingValidSignalTime | read-only | current | Actual remaining time for this facility to be automatically enabled by the auto-in-service mechanism. UNITS:minutes |
| 1.3.6.1.4.1.21296.1.2.33.1.1.1.15 | ColumnlinePtpAlarmReportControl | read-only | current | Controls the reporting of alarms for this particular object. default value :allowed |
| 1.3.6.1.4.1.21296.1.2.33.1.1.1.16 | ColumnlinePtpServiceType | read-only | current | service-type to provison line side service. default value :not-applicable |
| 1.3.6.1.4.1.21296.1.2.33.1.1.1.17 | ColumnlinePtpLineSystemMode | read-only | current | Indicates the specific mode of power control configured on the L1 transponder, and specifically, on this particular Line port within the L1 transponder. The at… |
| 1.3.6.1.4.1.21296.1.2.33.1.1.1.18 | ColumnlinePtpPowerThresholdLow | read-only | current | The default system threshold (known as 'Sensitivity') that triggers the OPR-OORL alarm (i.e., when the optical power received is below this value). Note that t… |
| 1.3.6.1.4.1.21296.1.2.33.1.1.1.19 | ColumnlinePtpPowerThresholdLowOffset | read-only | current | A user configurable attribute that results in the 'effective lower threshold' based on which the system raises the OPR-OORL alarm. The effective threshold will… |
| 1.3.6.1.4.1.21296.1.2.33.1.1.1.20 | ColumnlinePtpPowerThresholdHigh | read-only | current | The default system threshold (known as 'Overload') that triggers the OPR-OORH alarm (i.e., when the optical power received is greater than this value). Note th… |
| 1.3.6.1.4.1.21296.1.2.33.1.1.1.21 | ColumnlinePtpPowerThresholdHighOffset | read-only | current | A user configurable attribute that results in the 'effective upper threshold' based on which the system raises the OPR-OORH alarm. The effective threshold will… |
| 1.3.6.1.4.1.21296.1.2.33.1.1.1.22 | ColumnlinePtpAvailableResources | read-only | current | List of available resources.This is originally a YANG leaf-list, here encoded as a comma separated list of values. |
| 1.3.6.1.4.1.21296.1.2.33.1.1.1.23 | ColumnlinePtpUsedResources | read-only | current | List of used resources.This is originally a YANG leaf-list, here encoded as a comma separated list of values. |
| 1.3.6.1.4.1.21296.1.2.34 | Nodeflexo | |||
| 1.3.6.1.4.1.21296.1.2.34.1 | NodeflexoInfo | |||
| 1.3.6.1.4.1.21296.1.2.34.1.1 | TableflexoTable | not-accessible | current | Facility describing the flexo. Refer to G.709.1 and G.709.3 |
| 1.3.6.1.4.1.21296.1.2.34.1.1.1 | RowflexoEntry | not-accessible | current | Entry of flexoTable |
| 1.3.6.1.4.1.21296.1.2.34.1.1.1.1 | ColumnflexoName | read-only | current | A generic, configurable name for every facility. |
| 1.3.6.1.4.1.21296.1.2.34.1.1.1.2 | ColumnflexoSupportingCard | read-only | current | Card that holds this facility |
| 1.3.6.1.4.1.21296.1.2.34.1.1.1.3 | ColumnflexoSupportingPort | read-only | current | Ports that hold this facilityThis is originally a YANG leaf-list, here encoded as a comma separated list of values. |
| 1.3.6.1.4.1.21296.1.2.34.1.1.1.4 | ColumnflexoSupportingFacilities | read-only | current | An XPath reference to the parent facilities.This is originally a YANG leaf-list, here encoded as a comma separated list of values. |
| 1.3.6.1.4.1.21296.1.2.34.1.1.1.5 | ColumnflexoSupportedFacilities | read-only | current | An XPath reference to the children facilities.This is originally a YANG leaf-list, here encoded as a comma separated list of values. |
| 1.3.6.1.4.1.21296.1.2.34.1.1.1.6 | ColumnflexoAID | read-only | current | Resource Access Identifier (AID). Identifies an instance within a specific resource type. |
| 1.3.6.1.4.1.21296.1.2.34.1.1.1.7 | ColumnflexoLabel | read-only | current | The reply will be truncated in 128 bytes. User label. |
| 1.3.6.1.4.1.21296.1.2.34.1.1.1.8 | ColumnflexoAdminState | read-only | current | The administrative state of the managed object. default value :unlock |
| 1.3.6.1.4.1.21296.1.2.34.1.1.1.9 | ColumnflexoOperState | read-only | current | The operational state of this object. default value :disabled |
| 1.3.6.1.4.1.21296.1.2.34.1.1.1.10 | ColumnflexoAvailState | read-only | current | Availability state of an entity. |
| 1.3.6.1.4.1.21296.1.2.34.1.1.1.11 | ColumnflexoManagedBy | read-only | current | Describes whether this managed entity was system created or not. Only user created entities can be user deleted. default value :system |
| 1.3.6.1.4.1.21296.1.2.34.1.1.1.12 | ColumnflexoAlarmReportControl | read-only | current | Controls the reporting of alarms for this particular object. default value :allowed |
| 1.3.6.1.4.1.21296.1.2.34.1.1.1.13 | ColumnflexoFoicType | read-only | current | FOICx.k lanes means using k parallel lanes to carry a FlexO-x interface, where order x signifies the interface rate in units of 100G. A unique FOICx.k identifi… |
| 1.3.6.1.4.1.21296.1.2.34.1.1.1.14 | ColumnflexoFecType | read-only | current | The FEC type default value :ofec |
| 1.3.6.1.4.1.21296.1.2.34.1.1.1.15 | ColumnflexoIid | read-only | current | Uniquely identify each member of a group and the order of each member in the group. This information is required in the reordering process. Dont need to be seq… |
| 1.3.6.1.4.1.21296.1.2.34.1.1.1.16 | ColumnflexoAcceptedGroupId | read-only | current | The received group instance on the FlexO interface.This is originally a YANG leaf-list, here encoded as a comma separated list of values. |
| 1.3.6.1.4.1.21296.1.2.34.1.1.1.17 | ColumnflexoAcceptedIid | read-only | current | The received iid on the FlexO interface.This is originally a YANG leaf-list, here encoded as a comma separated list of values. |
| 1.3.6.1.4.1.21296.1.2.34.1.1.1.18 | ColumnflexoFddRaiseThreshold | read-only | current | The threshold for FEC Detected Degrade (FDD) alarm raise. default value :0.0155 |
| 1.3.6.1.4.1.21296.1.2.34.1.1.1.19 | ColumnflexoFddClearThreshold | read-only | current | The threshold for FEC Detected Degrade (FDD) alarm clear. default value :0.00924 |
| 1.3.6.1.4.1.21296.1.2.34.1.1.1.20 | ColumnflexoFedRaiseThreshold | read-only | current | The threshold for FEC Excessive Degrade (FED) alarm raise. default value :0.0165 |
| 1.3.6.1.4.1.21296.1.2.34.1.1.1.21 | ColumnflexoFedClearThreshold | read-only | current | The threshold for FEC Excessive Degrade (FED) alarm clear. default value :0.0132 |
| 1.3.6.1.4.1.21296.1.2.34.1.1.1.22 | ColumnflexoResourceMode | read-only | current | Resource mode configuration to support (ADM) add-drop or (XC)add-drop with regen. default value :ADM |
| 1.3.6.1.4.1.21296.1.2.35 | NodeflexoGroup | |||
| 1.3.6.1.4.1.21296.1.2.35.1 | NodeflexoGroupInfo | |||
| 1.3.6.1.4.1.21296.1.2.35.1.1 | TableflexoGroupTable | not-accessible | current | Facility describing the flexo-group. |
| 1.3.6.1.4.1.21296.1.2.35.1.1.1 | RowflexoGroupEntry | not-accessible | current | Entry of flexoGroupTable |
| 1.3.6.1.4.1.21296.1.2.35.1.1.1.1 | ColumnflexoGroupName | read-only | current | A generic, configurable name for every facility. |
| 1.3.6.1.4.1.21296.1.2.35.1.1.1.2 | ColumnflexoGroupSupportingCard | read-only | current | Card that holds this facility |
| 1.3.6.1.4.1.21296.1.2.35.1.1.1.3 | ColumnflexoGroupSupportingPort | read-only | current | Ports that hold this facilityThis is originally a YANG leaf-list, here encoded as a comma separated list of values. |
| 1.3.6.1.4.1.21296.1.2.35.1.1.1.4 | ColumnflexoGroupSupportingFacilities | read-only | current | An XPath reference to the parent facilities.This is originally a YANG leaf-list, here encoded as a comma separated list of values. |
| 1.3.6.1.4.1.21296.1.2.35.1.1.1.5 | ColumnflexoGroupSupportedFacilities | read-only | current | An XPath reference to the children facilities.This is originally a YANG leaf-list, here encoded as a comma separated list of values. |
| 1.3.6.1.4.1.21296.1.2.35.1.1.1.6 | ColumnflexoGroupAID | read-only | current | Resource Access Identifier (AID). Identifies an instance within a specific resource type. |
| 1.3.6.1.4.1.21296.1.2.35.1.1.1.7 | ColumnflexoGroupLabel | read-only | current | The reply will be truncated in 128 bytes. User label. |
| 1.3.6.1.4.1.21296.1.2.35.1.1.1.8 | ColumnflexoGroupAdminState | read-only | current | The administrative state of the managed object. default value :unlock |
| 1.3.6.1.4.1.21296.1.2.35.1.1.1.9 | ColumnflexoGroupOperState | read-only | current | The operational state of this object. default value :disabled |
| 1.3.6.1.4.1.21296.1.2.35.1.1.1.10 | ColumnflexoGroupAvailState | read-only | current | Availability state of an entity. |
| 1.3.6.1.4.1.21296.1.2.35.1.1.1.11 | ColumnflexoGroupManagedBy | read-only | current | Describes whether this managed entity was system created or not. Only user created entities can be user deleted. default value :system |
| 1.3.6.1.4.1.21296.1.2.35.1.1.1.12 | ColumnflexoGroupAlarmReportControl | read-only | current | Controls the reporting of alarms for this particular object. default value :allowed |
| 1.3.6.1.4.1.21296.1.2.35.1.1.1.13 | ColumnflexoGroupCarriers | read-only | current | A list of carriers that are bound to this facilities. Possible values can be any card/resources/supported-carriers.This is originally a YANG leaf-list, here en… |
| 1.3.6.1.4.1.21296.1.2.35.1.1.1.14 | ColumnflexoGroupRate | read-only | current | Carried signal basic rate class |
| 1.3.6.1.4.1.21296.1.2.35.1.1.1.15 | ColumnflexoGroupModulationFormat | read-only | current | Current modulation format |
| 1.3.6.1.4.1.21296.1.2.35.1.1.1.16 | ColumnflexoGroupFecType | read-only | current | The FEC type default value :ofec |
| 1.3.6.1.4.1.21296.1.2.35.1.1.1.17 | ColumnflexoGroupGroupId | read-only | current | 20bits, indicate the interface group instance that the FlexO-x interface is a member of. It will be unique in the NE |
| 1.3.6.1.4.1.21296.1.2.35.1.1.1.18 | ColumnflexoGroupExpectedGid | read-only | current | If the expected-gid > 0 then the system shall compare accepted-gid and expected-gid default value :0 |
| 1.3.6.1.4.1.21296.1.2.35.1.1.1.19 | ColumnflexoGroupFlexoType | read-only | current | The type of standard or proprietary flexo format the facilities conforms to. default value :enh-zr |
| 1.3.6.1.4.1.21296.1.2.35.1.1.1.20 | ColumnflexoGroupTotalTimeSlots | read-only | current | TBD. |
| 1.3.6.1.4.1.21296.1.2.35.1.1.1.21 | ColumnflexoGroupAvailableTimeSlots | read-only | current | The available time slots in the FlexO Group. |
| 1.3.6.1.4.1.21296.1.2.35.1.1.1.22 | ColumnflexoGroupTimeSlotGranularity | read-only | current | TBD. default value :100G |
| 1.3.6.1.4.1.21296.1.2.35.1.1.1.23 | ColumnflexoGroupLoopback | read-only | current | Loopback mode.Useful to debug on the fiber connection. default value :none |
| 1.3.6.1.4.1.21296.1.2.35.1.1.1.24 | ColumnflexoGroupLoopbackMode | read-only | current | Indicates loopback action for facility or terminal. default value :loopback |
| 1.3.6.1.4.1.21296.1.2.36 | NodeethZr | |||
| 1.3.6.1.4.1.21296.1.2.36.1 | NodeethZrInfo | |||
| 1.3.6.1.4.1.21296.1.2.36.1.1 | TableethZrTable | not-accessible | current | Facility describing the Eth-ZR. |
| 1.3.6.1.4.1.21296.1.2.36.1.1.1 | RowethZrEntry | not-accessible | current | Entry of ethZrTable |
| 1.3.6.1.4.1.21296.1.2.36.1.1.1.1 | ColumnethZrName | read-only | current | A generic, configurable name for every facility. |
| 1.3.6.1.4.1.21296.1.2.36.1.1.1.2 | ColumnethZrSupportingCard | read-only | current | Card that holds this facility |
| 1.3.6.1.4.1.21296.1.2.36.1.1.1.3 | ColumnethZrSupportingPort | read-only | current | Ports that hold this facilityThis is originally a YANG leaf-list, here encoded as a comma separated list of values. |
| 1.3.6.1.4.1.21296.1.2.36.1.1.1.4 | ColumnethZrSupportingFacilities | read-only | current | An XPath reference to the parent facilities.This is originally a YANG leaf-list, here encoded as a comma separated list of values. |
| 1.3.6.1.4.1.21296.1.2.36.1.1.1.5 | ColumnethZrSupportedFacilities | read-only | current | An XPath reference to the children facilities.This is originally a YANG leaf-list, here encoded as a comma separated list of values. |
| 1.3.6.1.4.1.21296.1.2.36.1.1.1.6 | ColumnethZrAID | read-only | current | Resource Access Identifier (AID). Identifies an instance within a specific resource type. |
| 1.3.6.1.4.1.21296.1.2.36.1.1.1.7 | ColumnethZrLabel | read-only | current | The reply will be truncated in 128 bytes. User label. |
| 1.3.6.1.4.1.21296.1.2.36.1.1.1.8 | ColumnethZrAdminState | read-only | current | The administrative state of the managed object. default value :unlock |
| 1.3.6.1.4.1.21296.1.2.36.1.1.1.9 | ColumnethZrOperState | read-only | current | The operational state of this object. default value :disabled |
| 1.3.6.1.4.1.21296.1.2.36.1.1.1.10 | ColumnethZrAvailState | read-only | current | Availability state of an entity. |
| 1.3.6.1.4.1.21296.1.2.36.1.1.1.11 | ColumnethZrManagedBy | read-only | current | Describes whether this managed entity was system created or not. Only user created entities can be user deleted. default value :system |
| 1.3.6.1.4.1.21296.1.2.36.1.1.1.12 | ColumnethZrAlarmReportControl | read-only | current | Controls the reporting of alarms for this particular object. default value :allowed |
| 1.3.6.1.4.1.21296.1.2.36.1.1.1.13 | ColumnethZrCarriers | read-only | current | A list of carriers that are bound to this facilities. Possible values can be any card/resources/supported-carriers.This is originally a YANG leaf-list, here en… |
| 1.3.6.1.4.1.21296.1.2.36.1.1.1.14 | ColumnethZrRate | read-only | current | Carried signal basic rate class |
| 1.3.6.1.4.1.21296.1.2.36.1.1.1.15 | ColumnethZrModulationFormat | read-only | current | Current modulation format |
| 1.3.6.1.4.1.21296.1.2.36.1.1.1.16 | ColumnethZrFecType | read-only | current | The FEC type default value :ofec |
| 1.3.6.1.4.1.21296.1.2.36.1.1.1.17 | ColumnethZrTotalTimeSlots | read-only | current | The member of the slots to be supported as times of 100G: rate-class/100. |
| 1.3.6.1.4.1.21296.1.2.36.1.1.1.18 | ColumnethZrAvailableTimeSlots | read-only | current | A list of time-slots that are available for provisioning new services. |
| 1.3.6.1.4.1.21296.1.2.36.1.1.1.19 | ColumnethZrFddThreshold | read-only | current | The threshold for FEC Detected Degrade (FDD) alarm. UNITS:avg BER default value :0.0195 |
| 1.3.6.1.4.1.21296.1.2.36.1.1.1.20 | ColumnethZrFedThreshold | read-only | current | The threshold for FEC Excessive Degrade. UNITS:avg BER default value :0.0206 |
| 1.3.6.1.4.1.21296.1.2.36.1.1.1.21 | ColumnethZrLoopback | read-only | current | Loopback mode.Useful to debug on the fiber connection. default value :none |
| 1.3.6.1.4.1.21296.1.2.36.1.1.1.22 | ColumnethZrInterfaceType | read-only | current | Interface type of ZR tom. default value :400ZR |
| 1.3.6.1.4.1.21296.1.2.36.1.1.1.23 | ColumnethZrFddMonitoring | read-only | current | The configured FEC Detected Degrade (FDD) monitoring mode. default value :disabled |
| 1.3.6.1.4.1.21296.1.2.36.1.1.1.24 | ColumnethZrFddClearThreshold | read-only | current | The threshold for FEC Detected Degrade (FDD) alarm clear. UNITS:avg BER default value :0.01062 |
| 1.3.6.1.4.1.21296.1.2.36.1.1.1.25 | ColumnethZrFedMonitoring | read-only | current | The configured FEC Excessive Degrade (FED) monitoring mode. default value :disabled |
| 1.3.6.1.4.1.21296.1.2.36.1.1.1.26 | ColumnethZrFedClearThreshold | read-only | current | The threshold for FEC Excessive Degrade (FED) alarm clear. UNITS:avg BER default value :0.01125 |
| 1.3.6.1.4.1.21296.1.2.36.1.1.1.27 | ColumnethZrLinkDegradeIndication | read-only | current | The local and remote link degradation status. default value :none |
| 1.3.6.1.4.1.21296.1.2.36.1.1.1.28 | ColumnethZrLoopbackHostInterface | read-only | current | Loopback on host interface. Useful to debug on the fiber connection. default value :none |
| 1.3.6.1.4.1.21296.1.2.36.1.1.1.29 | ColumnethZrLoopbackModemInterface | read-only | current | Loopback on modem interface. Useful to debug on the fiber connection. default value :none |
| 1.3.6.1.4.1.21296.1.2.36.1.1.1.30 | ColumnethZrCircuitId | read-only | current | System configured circuit ID, present in XCONs and associated facilities. For facilities, circuit-id is only filled in if an associated XCON exists. Format of … |
| 1.3.6.1.4.1.21296.1.2.36.1.1.1.31 | ColumnethZrLldpAdminStatus | read-only | current | LLDP operational mode for this port. default value :disabled |
| 1.3.6.1.4.1.21296.1.2.36.1.1.1.32 | ColumnethZrLldpIngressMode | read-only | current | If lldp enabled, define what is the LLDP behavior for this direction. Conditions:../lldp-admin-status != 'disabled' default value :disabled |
| 1.3.6.1.4.1.21296.1.2.36.1.1.1.33 | ColumnethZrLldpEgressMode | read-only | current | If lldp enabled, define what is the LLDP behavior for this direction. Conditions:../lldp-admin-status != 'disabled' default value :disabled |
| 1.3.6.1.4.1.21296.1.2.36.1.1.1.34 | ColumnethZrLldpTransmitInterval | read-only | current | The interval to transmit LLDP Tx TLVs. UNITS:seconds default value :30 |
| 1.3.6.1.4.1.21296.1.2.37 | Nodetdm | |||
| 1.3.6.1.4.1.21296.1.2.37.1 | Nodeoc | |||
| 1.3.6.1.4.1.21296.1.2.37.1.1 | TableocTable | not-accessible | current | Optical Carrier - level M, e.g. M=48, 192. |
| 1.3.6.1.4.1.21296.1.2.37.1.1.1 | RowocEntry | not-accessible | current | Entry of ocTable |
| 1.3.6.1.4.1.21296.1.2.37.1.1.1.1 | ColumnocName | read-only | current | A generic, configurable name for every facility. |
| 1.3.6.1.4.1.21296.1.2.37.1.1.1.2 | ColumnocSupportingCard | read-only | current | Card that holds this facility |
| 1.3.6.1.4.1.21296.1.2.37.1.1.1.3 | ColumnocSupportingPort | read-only | current | Ports that hold this facilityThis is originally a YANG leaf-list, here encoded as a comma separated list of values. |
| 1.3.6.1.4.1.21296.1.2.37.1.1.1.4 | ColumnocSupportingFacilities | read-only | current | An XPath reference to the parent facilities.This is originally a YANG leaf-list, here encoded as a comma separated list of values. |
| 1.3.6.1.4.1.21296.1.2.37.1.1.1.5 | ColumnocSupportedFacilities | read-only | current | An XPath reference to the children facilities.This is originally a YANG leaf-list, here encoded as a comma separated list of values. |
| 1.3.6.1.4.1.21296.1.2.37.1.1.1.6 | ColumnocAID | read-only | current | Resource Access Identifier (AID). Identifies an instance within a specific resource type. |
| 1.3.6.1.4.1.21296.1.2.37.1.1.1.7 | ColumnocLabel | read-only | current | The reply will be truncated in 128 bytes. User label. |
| 1.3.6.1.4.1.21296.1.2.37.1.1.1.8 | ColumnocAdminState | read-only | current | The administrative state of the managed object. default value :unlock |
| 1.3.6.1.4.1.21296.1.2.37.1.1.1.9 | ColumnocOperState | read-only | current | The operational state of this object. default value :disabled |
| 1.3.6.1.4.1.21296.1.2.37.1.1.1.10 | ColumnocAvailState | read-only | current | Availability state of an entity. |
| 1.3.6.1.4.1.21296.1.2.37.1.1.1.11 | ColumnocManagedBy | read-only | current | Describes whether this managed entity was system created or not. Only user created entities can be user deleted. default value :system |
| 1.3.6.1.4.1.21296.1.2.37.1.1.1.12 | ColumnocAlarmReportControl | read-only | current | Controls the reporting of alarms for this particular object. default value :allowed |
| 1.3.6.1.4.1.21296.1.2.37.1.1.1.13 | ColumnocType | read-only | current | Type of SONET signal. Level N of OC-N (Optical Carrier level N). |
| 1.3.6.1.4.1.21296.1.2.37.1.1.1.15 | ColumnocTxMappingMode | read-only | current | The tx mapping mode of client port. The possible values are dependent on the HW and configuration. default value :BMP |
| 1.3.6.1.4.1.21296.1.2.37.1.1.1.16 | ColumnocExpectedMappingMode | read-only | current | The expected mapping mode of client port. The possible values are dependent on the HW and configuration. default value :BMP |
| 1.3.6.1.4.1.21296.1.2.37.1.1.1.17 | ColumnocServiceMode | read-only | current | Service mode for the tdm facility. default value :none |
| 1.3.6.1.4.1.21296.1.2.37.1.1.1.18 | ColumnocServiceModeQualifier | read-only | current | Service mode qualifier for the tdm facility. default value :none |
| 1.3.6.1.4.1.21296.1.2.37.1.1.1.19 | ColumnocTtiStyle | read-only | current | The configured mode of the TTI. default value :1 |
| 1.3.6.1.4.1.21296.1.2.37.1.1.1.20 | ColumnocTimMonitor | read-only | current | The enable switching of tim defect monitor mode. default value :disabled |
| 1.3.6.1.4.1.21296.1.2.37.1.1.1.21 | ColumnocTxTti | read-only | current | Transmit TTI - Sent by this facility to the far-end remote facility. |
| 1.3.6.1.4.1.21296.1.2.37.1.1.1.22 | ColumnocRxTti | read-only | current | Receive TTI - Received by this facility from the far-end remote facility. |
| 1.3.6.1.4.1.21296.1.2.37.1.1.1.23 | ColumnocRxTtiHex | read-only | current | Receive TTI in HEX. |
| 1.3.6.1.4.1.21296.1.2.37.1.1.1.24 | ColumnocExpectedTti | read-only | current | Expected TTI - The TTI this facility expects to receive from the far-end remote facility. default value : |
| 1.3.6.1.4.1.21296.1.2.37.1.1.1.25 | ColumnocLoopback | read-only | current | Loopback mode.Useful to debug on the fiber connection. default value :none |
| 1.3.6.1.4.1.21296.1.2.37.1.1.1.26 | ColumnocLoopbackMode | read-only | current | Indicates loopback action for facility or terminal. default value :loopback |
| 1.3.6.1.4.1.21296.1.2.37.1.1.1.27 | ColumnocTestSignalType | read-only | current | The type of test pattern that is injected. default value :none |
| 1.3.6.1.4.1.21296.1.2.37.1.1.1.28 | ColumnocTestSignalDirection | read-only | current | The direction of the test signal. default value :egress |
| 1.3.6.1.4.1.21296.1.2.37.1.1.1.29 | ColumnocTestSignalMonitoring | read-only | current | Monitor the incoming test signals for diagnostics. default value :false |
| 1.3.6.1.4.1.21296.1.2.37.1.1.1.30 | ColumnocSpeed | read-only | current | The speed of client interface. UNITS:Gbit/s |
| 1.3.6.1.4.1.21296.1.2.37.1.1.1.31 | ColumnocCircuitId | read-only | current | System configured circuit ID, present in XCONs and associated facilities. For facilities, circuit-id is only filled in if an associated XCON exists. Format of … |
| 1.3.6.1.4.1.21296.1.2.37.2 | Nodestm | |||
| 1.3.6.1.4.1.21296.1.2.37.2.1 | TablestmTable | not-accessible | current | Synchronous Transport Module N, e.g. N=16, 64. Reference [ITU-T G.691]. |
| 1.3.6.1.4.1.21296.1.2.37.2.1.1 | RowstmEntry | not-accessible | current | Entry of stmTable |
| 1.3.6.1.4.1.21296.1.2.37.2.1.1.1 | ColumnstmName | read-only | current | A generic, configurable name for every facility. |
| 1.3.6.1.4.1.21296.1.2.37.2.1.1.2 | ColumnstmSupportingCard | read-only | current | Card that holds this facility |
| 1.3.6.1.4.1.21296.1.2.37.2.1.1.3 | ColumnstmSupportingPort | read-only | current | Ports that hold this facilityThis is originally a YANG leaf-list, here encoded as a comma separated list of values. |
| 1.3.6.1.4.1.21296.1.2.37.2.1.1.4 | ColumnstmSupportingFacilities | read-only | current | An XPath reference to the parent facilities.This is originally a YANG leaf-list, here encoded as a comma separated list of values. |
| 1.3.6.1.4.1.21296.1.2.37.2.1.1.5 | ColumnstmSupportedFacilities | read-only | current | An XPath reference to the children facilities.This is originally a YANG leaf-list, here encoded as a comma separated list of values. |
| 1.3.6.1.4.1.21296.1.2.37.2.1.1.6 | ColumnstmAID | read-only | current | Resource Access Identifier (AID). Identifies an instance within a specific resource type. |
| 1.3.6.1.4.1.21296.1.2.37.2.1.1.7 | ColumnstmLabel | read-only | current | The reply will be truncated in 128 bytes. User label. |
| 1.3.6.1.4.1.21296.1.2.37.2.1.1.8 | ColumnstmAdminState | read-only | current | The administrative state of the managed object. default value :unlock |
| 1.3.6.1.4.1.21296.1.2.37.2.1.1.9 | ColumnstmOperState | read-only | current | The operational state of this object. default value :disabled |
| 1.3.6.1.4.1.21296.1.2.37.2.1.1.10 | ColumnstmAvailState | read-only | current | Availability state of an entity. |
| 1.3.6.1.4.1.21296.1.2.37.2.1.1.11 | ColumnstmManagedBy | read-only | current | Describes whether this managed entity was system created or not. Only user created entities can be user deleted. default value :system |
| 1.3.6.1.4.1.21296.1.2.37.2.1.1.12 | ColumnstmAlarmReportControl | read-only | current | Controls the reporting of alarms for this particular object. default value :allowed |
| 1.3.6.1.4.1.21296.1.2.37.2.1.1.13 | ColumnstmType | read-only | current | The type of SDH signal (STM-N). |
| 1.3.6.1.4.1.21296.1.2.37.2.1.1.15 | ColumnstmTxMappingMode | read-only | current | The tx mapping mode of client port. The possible values are dependent on the HW and configuration. default value :BMP |
| 1.3.6.1.4.1.21296.1.2.37.2.1.1.16 | ColumnstmExpectedMappingMode | read-only | current | The expected mapping mode of client port. The possible values are dependent on the HW and configuration. default value :BMP |
| 1.3.6.1.4.1.21296.1.2.37.2.1.1.17 | ColumnstmServiceMode | read-only | current | Service mode for the tdm facility. default value :none |
| 1.3.6.1.4.1.21296.1.2.37.2.1.1.18 | ColumnstmServiceModeQualifier | read-only | current | Service mode qualifier for the tdm facility. default value :none |
| 1.3.6.1.4.1.21296.1.2.37.2.1.1.19 | ColumnstmTtiStyle | read-only | current | The configured mode of the TTI. default value :1 |
| 1.3.6.1.4.1.21296.1.2.37.2.1.1.20 | ColumnstmTimMonitor | read-only | current | The enable switching of tim defect monitor mode. default value :disabled |
| 1.3.6.1.4.1.21296.1.2.37.2.1.1.21 | ColumnstmTxTti | read-only | current | Transmit TTI - Sent by this facility to the far-end remote facility. |
| 1.3.6.1.4.1.21296.1.2.37.2.1.1.22 | ColumnstmRxTti | read-only | current | Receive TTI - Received by this facility from the far-end remote facility. |
| 1.3.6.1.4.1.21296.1.2.37.2.1.1.23 | ColumnstmRxTtiHex | read-only | current | Receive TTI in HEX. |
| 1.3.6.1.4.1.21296.1.2.37.2.1.1.24 | ColumnstmExpectedTti | read-only | current | Expected TTI - The TTI this facility expects to receive from the far-end remote facility. default value : |
| 1.3.6.1.4.1.21296.1.2.37.2.1.1.25 | ColumnstmLoopback | read-only | current | Loopback mode.Useful to debug on the fiber connection. default value :none |
| 1.3.6.1.4.1.21296.1.2.37.2.1.1.26 | ColumnstmLoopbackMode | read-only | current | Indicates loopback action for facility or terminal. default value :loopback |
| 1.3.6.1.4.1.21296.1.2.37.2.1.1.27 | ColumnstmTestSignalType | read-only | current | The type of test pattern that is injected. default value :none |
| 1.3.6.1.4.1.21296.1.2.37.2.1.1.28 | ColumnstmTestSignalDirection | read-only | current | The direction of the test signal. default value :egress |
| 1.3.6.1.4.1.21296.1.2.37.2.1.1.29 | ColumnstmTestSignalMonitoring | read-only | current | Monitor the incoming test signals for diagnostics. default value :false |
| 1.3.6.1.4.1.21296.1.2.37.2.1.1.30 | ColumnstmSpeed | read-only | current | The speed of client interface. UNITS:Gbit/s |
| 1.3.6.1.4.1.21296.1.2.37.2.1.1.31 | ColumnstmCircuitId | read-only | current | System configured circuit ID, present in XCONs and associated facilities. For facilities, circuit-id is only filled in if an associated XCON exists. Format of … |
| 1.3.6.1.4.1.21296.1.2.38 | NodedataPathEncryption | |||
| 1.3.6.1.4.1.21296.1.2.38.2 | NodesecureEntity | |||
| 1.3.6.1.4.1.21296.1.2.38.2.1 | TablesecureEntityTable | not-accessible | current | List of l1 encryption secure entities. |
| 1.3.6.1.4.1.21296.1.2.38.2.1.1 | RowsecureEntityEntry | not-accessible | current | Entry of secureEntityTable |
| 1.3.6.1.4.1.21296.1.2.38.2.1.1.1 | ColumnsecureEntityName | read-only | current | A name for the data path l1 encryption secure entity (SecY). |
| 1.3.6.1.4.1.21296.1.2.38.2.1.1.2 | ColumnsecureEntitySupportingEntityType | read-only | current | Indicates supporting entity type. default value :wavelength-encryption |
| 1.3.6.1.4.1.21296.1.2.38.2.1.1.3 | ColumnsecureEntityEnabled | read-only | current | Indicates whether the SecY are configured and attached to any data path entity. default value :false |
| 1.3.6.1.4.1.21296.1.2.38.2.1.1.4 | ColumnsecureEntitySupportingFacility | read-only | current | The optical-carrier/L-ODU that needs data path encryption. |
| 1.3.6.1.4.1.21296.1.2.38.2.1.1.5 | ColumnsecureEntityRemoteSecureEntity | read-only | current | Refers to the far-end secure entity's supporting facility AID. Required by IKEv2 - This will be used by IKEv2 as a traffic selector. |
| 1.3.6.1.4.1.21296.1.2.38.2.1.1.6 | ColumnsecureEntityAID | read-only | current | A system-generated AID for the SecY. |
| 1.3.6.1.4.1.21296.1.2.38.2.1.1.7 | ColumnsecureEntityOperState | read-only | current | The operational state of this object. default value :disabled |
| 1.3.6.1.4.1.21296.1.2.38.2.1.1.8 | ColumnsecureEntityAlarmReportControl | read-only | current | Controls the reporting of alarms for this particular object. default value :allowed |
| 1.3.6.1.4.1.21296.1.2.38.2.1.1.9 | ColumnsecureEntityLabel | read-only | current | The reply will be truncated in 128 bytes. User label. |
| 1.3.6.1.4.1.21296.1.2.38.2.1.1.10 | ColumnsecureEntityReKeyFrequency | read-only | current | The re-key frequency for the data path encryption service. UNITS:seconds default value :300 |
| 1.3.6.1.4.1.21296.1.2.38.2.1.1.11 | ColumnsecureEntityReKeyFailPolicy | read-only | current | Indicates the NE's policy and consequent action when re-keying the data path security association is unsuccessful. default value :continue-traffic |
| 1.3.6.1.4.1.21296.1.2.38.2.1.1.12 | ColumnsecureEntityTrafficKillOffset | read-only | current | If the re-key fail policy is set to KILL-TRAFFIC, this attribute indicates the amount of time the system waits before killing encrypted data path. Conditions:.… |
| 1.3.6.1.4.1.21296.1.2.38.2.1.1.13 | ColumnsecureEntityEsn | read-only | current | Extended Sequence Number (ESN) support. default value :true |
| 1.3.6.1.4.1.21296.1.2.38.3 | NodesecureEntitySaProposal | |||
| 1.3.6.1.4.1.21296.1.2.38.3.1 | TablesecureEntitySaProposalTable | not-accessible | current | A list of protocol proposals when negotiating the secure entity SA with the far-end secure entity peer. |
| 1.3.6.1.4.1.21296.1.2.38.3.1.1 | RowsecureEntitySaProposalEntry | not-accessible | current | Entry of secureEntitySaProposalTable |
| 1.3.6.1.4.1.21296.1.2.38.3.1.1.1 | ColumnsecureEntitySaProposalNumber | read-only | current | The proposal number for the secure entity SA. |
| 1.3.6.1.4.1.21296.1.2.38.3.1.1.2 | ColumnsecureEntitySaProposalEncryptionAlgorithm | read-only | current | The encryption algorithm for the secure entity SA. |
| 1.3.6.1.4.1.21296.1.2.38.3.1.1.3 | ColumnsecureEntitySaProposalEncryptionKeyLength | read-only | current | The secure entity SA encryption algorithm key length. |
| 1.3.6.1.4.1.21296.1.2.38.3.1.1.4 | ColumnsecureEntitySaProposalIntegrityAlgorithm | read-only | current | Secure entity SA integrity algorithm advertised to the far-end secure entity peer. |
| 1.3.6.1.4.1.21296.1.2.38.3.1.1.5 | ColumnsecureEntitySaProposalDhGroup | read-only | current | Secure entity SA Diffie-Hellman group advertised to the far-end secure entity peer. |
| 1.3.6.1.4.1.21296.1.2.39 | Nodeikev2 | |||
| 1.3.6.1.4.1.21296.1.2.39.1 | Nodeikev2Info | |||
| 1.3.6.1.4.1.21296.1.2.39.1.1 | Scalarikev2DataPathEncryptionSanIkeIdMatch | read-only | current | A global, L1 encryption-specific policy that indicates whether the NE must validate Certificate subject alternate name to match the IKE ID (OPT-IN) or not (OPT… |
| 1.3.6.1.4.1.21296.1.2.39.2 | Nodeikev2LocalInstance | |||
| 1.3.6.1.4.1.21296.1.2.39.2.1 | Tableikev2LocalInstanceTable | not-accessible | current | List of local IKE protocol daemon instance. |
| 1.3.6.1.4.1.21296.1.2.39.2.1.1 | Rowikev2LocalInstanceEntry | not-accessible | current | Entry of ikev2LocalInstanceTable |
| 1.3.6.1.4.1.21296.1.2.39.2.1.1.1 | Columnikev2LocalInstanceName | read-only | current | The name (ID) of the local IKE protocol daemon instance. |
| 1.3.6.1.4.1.21296.1.2.39.2.1.1.2 | Columnikev2LocalInstanceHostCardEncryptionCapability | read-only | current | Indicates whether the card on which this IKEv2 local instance is running, supports the ability to do encryption. Only of relevance for scope data path encrypti… |
| 1.3.6.1.4.1.21296.1.2.39.2.1.1.3 | Columnikev2LocalInstanceScope | read-only | current | The scope of the IKEv2 instance for which security associations (SA) are being negotiated. |
| 1.3.6.1.4.1.21296.1.2.39.2.1.1.4 | Columnikev2LocalInstanceHostCard | read-only | current | The reference to the service card on which this IKEv2 protocol instance is running. |
| 1.3.6.1.4.1.21296.1.2.39.2.1.1.5 | Columnikev2LocalInstanceStartedTime | read-only | current | Local system timestamp when this IKEv2 instance was started. |
| 1.3.6.1.4.1.21296.1.2.39.2.1.1.6 | Columnikev2LocalInstanceAID | read-only | current | Resource Access Identifier (AID). Identifies an instance within a specific resource type. |
| 1.3.6.1.4.1.21296.1.2.39.2.1.1.7 | Columnikev2LocalInstanceLabel | read-only | current | The reply will be truncated in 128 bytes. User label. |
| 1.3.6.1.4.1.21296.1.2.39.2.1.1.8 | Columnikev2LocalInstanceAdminState | read-only | current | The administrative state of the managed object. default value :unlock |
| 1.3.6.1.4.1.21296.1.2.39.2.1.1.9 | Columnikev2LocalInstanceOperState | read-only | current | The operational state of this object. default value :disabled |
| 1.3.6.1.4.1.21296.1.2.39.2.1.1.10 | Columnikev2LocalInstanceAlarmReportControl | read-only | current | Controls the reporting of alarms for this particular object. default value :allowed |
| 1.3.6.1.4.1.21296.1.2.39.2.1.1.11 | Columnikev2LocalInstanceLocalAddressAssignmentMethod | read-only | current | Local IP address assignment method for IKEv2 channel. Only of relevance for scope data path encryption. default value :auto |
| 1.3.6.1.4.1.21296.1.2.39.2.1.1.12 | Columnikev2LocalInstanceLocalAddress | read-only | current | Local IPv4 address for IKEv2 channel with prefix-length 32. default value :0.0.0.0 |
| 1.3.6.1.4.1.21296.1.2.39.3 | NodesupportingInterface | |||
| 1.3.6.1.4.1.21296.1.2.39.3.1 | TablesupportingInterfaceTable | not-accessible | current | List of all local interfaces on which this local IKEv2 instance listens for incoming IKE negotiations. |
| 1.3.6.1.4.1.21296.1.2.39.3.1.1 | RowsupportingInterfaceEntry | not-accessible | current | Entry of supportingInterfaceTable |
| 1.3.6.1.4.1.21296.1.2.39.3.1.1.1 | ColumnsupportingInterfaceInterface | read-only | current | A reference to the IPv4/IPv6 interface. |
| 1.3.6.1.4.1.21296.1.2.39.4 | Nodeipv4Endpoints | |||
| 1.3.6.1.4.1.21296.1.2.39.4.1 | Tableipv4EndpointsTable | not-accessible | current | All local IPv4 end-points on which this IKEv2 instance is listening for incoming IKE negotiations. |
| 1.3.6.1.4.1.21296.1.2.39.4.1.1 | Rowipv4EndpointsEntry | not-accessible | current | Entry of ipv4EndpointsTable |
| 1.3.6.1.4.1.21296.1.2.39.4.1.1.1 | Columnipv4EndpointsIpAddress | read-only | current | NULL |
| 1.3.6.1.4.1.21296.1.2.39.4.1.1.2 | Columnipv4EndpointsPort | read-only | current | The IKEv2 UDP listen port. default value :500 |
| 1.3.6.1.4.1.21296.1.2.39.5 | Nodeipv6Endpoints | |||
| 1.3.6.1.4.1.21296.1.2.39.5.1 | Tableipv6EndpointsTable | not-accessible | current | All local IPv6 end-points on which this IKEv2 instance is listening for incoming IKE negotiations. |
| 1.3.6.1.4.1.21296.1.2.39.5.1.1 | Rowipv6EndpointsEntry | not-accessible | current | Entry of ipv6EndpointsTable |
| 1.3.6.1.4.1.21296.1.2.39.5.1.1.1 | Columnipv6EndpointsIpAddress | read-only | current | NULL |
| 1.3.6.1.4.1.21296.1.2.39.5.1.1.2 | Columnipv6EndpointsPort | read-only | current | The IKEv2 UDP listen port. default value :500 |
| 1.3.6.1.4.1.21296.1.2.39.7 | Nodeikev2Peer | |||
| 1.3.6.1.4.1.21296.1.2.39.7.1 | Tableikev2PeerTable | not-accessible | current | List of remote IKE peers associated with this local IKE instance. |
| 1.3.6.1.4.1.21296.1.2.39.7.1.1 | Rowikev2PeerEntry | not-accessible | current | Entry of ikev2PeerTable |
| 1.3.6.1.4.1.21296.1.2.39.7.1.1.1 | Columnikev2PeerName | read-only | current | A unique identifier for each IKE peer association. |
| 1.3.6.1.4.1.21296.1.2.39.7.1.1.2 | Columnikev2PeerDestination | read-only | current | The IPv4/IPv6 address or the domain name of the far-end IKE peer. Only of relevance for scope management ipsec and name not global. |
| 1.3.6.1.4.1.21296.1.2.39.7.1.1.3 | Columnikev2PeerPort | read-only | current | The UDP port on which the IKE session exists with the far-end IKE peer. Only of relevance for scope management ipsec and name not global. default value :500 |
| 1.3.6.1.4.1.21296.1.2.39.7.1.1.4 | Columnikev2PeerAID | read-only | current | Resource Access Identifier (AID). Identifies an instance within a specific resource type. |
| 1.3.6.1.4.1.21296.1.2.39.7.1.1.5 | Columnikev2PeerLabel | read-only | current | The reply will be truncated in 128 bytes. User label. |
| 1.3.6.1.4.1.21296.1.2.39.7.1.1.6 | Columnikev2PeerAdminState | read-only | current | The administrative state of the managed object. default value :unlock |
| 1.3.6.1.4.1.21296.1.2.39.7.1.1.7 | Columnikev2PeerOperState | read-only | current | The operational state of this object. default value :disabled |
| 1.3.6.1.4.1.21296.1.2.39.7.1.1.8 | Columnikev2PeerAlarmReportControl | read-only | current | Controls the reporting of alarms for this particular object. default value :allowed |
| 1.3.6.1.4.1.21296.1.2.39.7.1.1.9 | Columnikev2PeerLocalIdentityType | read-only | current | Type of local identity. default value :id-key |
| 1.3.6.1.4.1.21296.1.2.39.7.1.1.10 | Columnikev2PeerLocalIdentity | read-only | current | The reply will be truncated in 128 bytes. Identity of local IKE instance. |
| 1.3.6.1.4.1.21296.1.2.39.7.1.1.11 | Columnikev2PeerPeerIdentityType | read-only | current | Type of peer identity. default value :id-key |
| 1.3.6.1.4.1.21296.1.2.39.7.1.1.12 | Columnikev2PeerPeerIdentity | read-only | current | The reply will be truncated in 128 bytes. Identity of remote IKE instance. |
| 1.3.6.1.4.1.21296.1.2.39.7.1.1.13 | Columnikev2PeerAuthenticationScheme | read-only | current | IKEv2 authentication mechanism with the peer. default value :x.509-certificate |
| 1.3.6.1.4.1.21296.1.2.39.7.1.1.14 | Columnikev2PeerPreSharedKeyType | read-only | current | The type of pre-shared key scheme. Mandatory when authentication-scheme is 'pre-shared-key' and post-quantum-preshared-key-scheme is not 'sms'. Automatically s… |
| 1.3.6.1.4.1.21296.1.2.39.7.1.1.15 | Columnikev2PeerPskAscii | read-only | current | Plain-text ASCII value for the PSK. Conditions:../authentication-scheme='pre-shared-key' and ../pre-shared-key-type='ascii' |
| 1.3.6.1.4.1.21296.1.2.39.7.1.1.16 | Columnikev2PeerPskHex | read-write | current | The reply will be truncated in 128 bytes. Binary, hexadecimal value for the PSK. Mandatory when pre-shared-key-type is 'hex' Can be provisioned by SMS when pos… |
| 1.3.6.1.4.1.21296.1.2.39.7.1.1.17 | Columnikev2PeerPskConfiguredTimestamp | read-only | current | Local NE timestamp when the PSK was configured. Conditions:../../../scope='data-path-encryption' and ../authentication-scheme='pre-shared-key' |
| 1.3.6.1.4.1.21296.1.2.39.7.1.1.18 | Columnikev2PeerPskLifetime | read-only | current | Absolute time duration in days after which the PSK will expire. Conditions:../../../scope='data-path-encryption' and ../authentication-scheme='pre-shared-key' … |
| 1.3.6.1.4.1.21296.1.2.39.7.1.1.19 | Columnikev2PeerPskExpirationWarning | read-only | current | An absolute time duration (in days) at which the NE provides a warning when the PSK is about to expire . Conditions:../../../scope='data-path-encryption' and .… |
| 1.3.6.1.4.1.21296.1.2.39.7.1.1.21 | Columnikev2PeerLocalCertificate | read-only | current | The locally installed certificates that the local IKEv2 instance uses with this particular IKE peer for purposes of authentication. Customers can pick one or m… |
| 1.3.6.1.4.1.21296.1.2.39.7.1.1.22 | Columnikev2PeerPeerCertificate | read-only | current | The locally installed list of peer certificates that the instance uses to authenticate the far-end IKE peer. These certificates indicate the identity of this f… |
| 1.3.6.1.4.1.21296.1.2.39.7.1.1.23 | Columnikev2PeerLastUsedLocalCertificate | read-only | current | A reference to the specific local entity leaf certificate that was last used during the IKE authentication with the far-end peer. Conditions:../authentication-… |
| 1.3.6.1.4.1.21296.1.2.39.7.1.1.24 | Columnikev2PeerLastUsedPeerCertificate | read-only | current | A reference to the specific peer leaf certificate that was last used to authenticate the far-end IKE peer. Conditions:../../../scope='data-path-encryption' and… |
| 1.3.6.1.4.1.21296.1.2.39.7.1.1.25 | Columnikev2PeerReKeyFrequency | read-only | current | The re-key frequency for the IKE security association with the far-end IKE peer. Range and default values may be context-specific. UNITS:seconds default value … |
| 1.3.6.1.4.1.21296.1.2.39.7.1.1.26 | Columnikev2PeerReKeyFailPolicy | read-only | current | Indicates the NE's policy and consequent action when re-keying the IKE security association is unsuccessful. Only of release for scope for data path encryption… |
| 1.3.6.1.4.1.21296.1.2.39.7.1.1.27 | Columnikev2PeerReKeyTrafficKillOffset | read-only | current | If the re-key fail policy is set to KILL-TRAFFIC, this attribute indicates the amount of time the system waits before killing all encrypted data security assoc… |
| 1.3.6.1.4.1.21296.1.2.39.7.1.1.28 | Columnikev2PeerReAuthFrequency | read-only | current | The re-authentication frequency for the IKE security association with the far-end IKE peer. Range and default values may be context-specific UNITS:seconds defa… |
| 1.3.6.1.4.1.21296.1.2.39.7.1.1.29 | Columnikev2PeerReAuthFailPolicy | read-only | current | Indicates the NE's policy and consequent action when re-authenticating the far-end IKE peer is unsuccessful. Only of relevance for scope for data path encrypti… |
| 1.3.6.1.4.1.21296.1.2.39.7.1.1.30 | Columnikev2PeerReAuthTrafficKillOffset | read-only | current | If the re-authentication fail policy is set to KILL-TRAFFIC, this attribute indicates the amount of time the system waits before killing all Child SAs that are… |
| 1.3.6.1.4.1.21296.1.2.39.7.1.1.31 | Columnikev2PeerDpdDelay | read-only | current | The interval to check the liveness of a peer actively. Only of relevance for scope management ipsec and name not global. default value :30 |
| 1.3.6.1.4.1.21296.1.2.39.7.1.1.32 | Columnikev2PeerKeyingTries | read-only | current | The number of rekeying attempts once a peer is considered dead. Only of relevance for scope management ipsec and name not global. default value :infinite |
| 1.3.6.1.4.1.21296.1.2.39.7.1.1.33 | Columnikev2PeerInterface | read-only | current | A reference to a supported IPv4/IPv6 interface. Only of relevance for scope management ipsec and name not global. |
| 1.3.6.1.4.1.21296.1.2.39.7.1.1.34 | Columnikev2PeerPskLifetimeEnable | read-only | current | Indicates whether PSK lifetime notification is enabled or disabled Conditions:../../../scope='data-path-encryption' and ../authentication-scheme='pre-shared-ke… |
| 1.3.6.1.4.1.21296.1.2.39.7.1.1.35 | Columnikev2PeerPskHash | read-only | current | HMAC SHA512 'Key Pad for IKEv2' with PSK (IETF RFC 7296). Conditions:../../../scope='data-path-encryption' and ../authentication-scheme='pre-shared-key' and ..… |
| 1.3.6.1.4.1.21296.1.2.39.7.1.1.36 | Columnikev2PeerPostQuantumPresharedKeyScheme | read-only | current | Policy to enable PPK (Post-Quantum Preshared Key) for quantum-resistant security (RFC 8784). PPK is used in IKE_SA_INIT to strengthen key derivation (SKEYSEED)… |
| 1.3.6.1.4.1.21296.1.2.39.7.1.1.37 | Columnikev2PeerPpkRequired | read-only | current | Indicates whether PPK support is mandatory for the IKE peer. When true, peers must support the PPK extension (RFC 8784) for both key derivation in IKE_SA_INIT … |
| 1.3.6.1.4.1.21296.1.2.39.7.1.1.38 | Columnikev2PeerPpkId | read-write | current | Plain text identifier for the PPK used for quantum-resistant security (RFC 8784). Required when post-quantum-preshared-key-scheme is 'manual'. Managed by SMS w… |
| 1.3.6.1.4.1.21296.1.2.39.7.1.1.39 | Columnikev2PeerPpkKey | read-write | current | Binary hexadecimal key value for the PPK (32 bytes = 64 hex chars). Mixed into SKEYSEED during IKE_SA_INIT and into the AUTH payload computation during IKE_AUT… |
| 1.3.6.1.4.1.21296.1.2.39.7.1.1.40 | Columnikev2PeerSmsState | read-only | current | Read-only state tracking the SMS key provisioning progress for this IKE peer. This state is automatically updated by the system as keys are received and config… |
| 1.3.6.1.4.1.21296.1.2.39.7.1.1.41 | Columnikev2PeerSmsOperation | read-write | current | SMS device control operation state machine defining SMS behavior during key provisioning and IKE session lifecycle management. operations track the SMS-side ac… |
| 1.3.6.1.4.1.21296.1.2.39.8 | NodeikeSaProposal | |||
| 1.3.6.1.4.1.21296.1.2.39.8.1 | TableikeSaProposalTable | not-accessible | current | A list of protocol proposals when negotiating the IKE SA with the far-end IKE peer. |
| 1.3.6.1.4.1.21296.1.2.39.8.1.1 | RowikeSaProposalEntry | not-accessible | current | Entry of ikeSaProposalTable |
| 1.3.6.1.4.1.21296.1.2.39.8.1.1.1 | ColumnikeSaProposalNumber | read-only | current | The proposal number for the IKE SA. |
| 1.3.6.1.4.1.21296.1.2.39.8.1.1.2 | ColumnikeSaProposalProtocolId | read-only | current | The protocol ID (type) for which the IKE proposal applies to. default value :IKE |
| 1.3.6.1.4.1.21296.1.2.39.8.1.1.3 | ColumnikeSaProposalIntegrityAlgorithm | read-only | current | A list of IPsec SA integrity algorithms advertised to the far-end IKE peer.This is originally a YANG leaf-list, here encoded as a comma separated list of value… |
| 1.3.6.1.4.1.21296.1.2.39.8.1.1.4 | ColumnikeSaProposalDhGroup | read-only | current | A list of IKE SA Diffie-Hellman groups advertised to the far-end IKE peer.This is originally a YANG leaf-list, here encoded as a comma separated list of values. |
| 1.3.6.1.4.1.21296.1.2.39.8.1.1.5 | ColumnikeSaProposalPrf | read-only | current | A list of IKE SA pseudo-random functions advertised to the far-end IKE peer.This is originally a YANG leaf-list, here encoded as a comma separated list of valu… |
| 1.3.6.1.4.1.21296.1.2.39.9 | NodeencryptionAlgorithm | |||
| 1.3.6.1.4.1.21296.1.2.39.9.1 | TableencryptionAlgorithmTable | not-accessible | current | A list of IKE SA encryption algorithms advertised to the far-end IKE peer. |
| 1.3.6.1.4.1.21296.1.2.39.9.1.1 | RowencryptionAlgorithmEntry | not-accessible | current | Entry of encryptionAlgorithmTable |
| 1.3.6.1.4.1.21296.1.2.39.9.1.1.1 | ColumnencryptionAlgorithmAlgorithm | read-only | current | The encryption algorithm for the IKE SA. |
| 1.3.6.1.4.1.21296.1.2.39.9.1.1.2 | ColumnencryptionAlgorithmKeyLength | read-only | current | The IKE SA encryption algorithm key length. |
| 1.3.6.1.4.1.21296.1.2.39.10 | NodesecurityPolicyDatabase | |||
| 1.3.6.1.4.1.21296.1.2.39.10.1 | TablesecurityPolicyDatabaseTable | not-accessible | current | Represents the Security Policy Database (SPD) that specifies what services are to be offered to IP datagrams (in case of management IPsec) or to data path encr… |
| 1.3.6.1.4.1.21296.1.2.39.10.1.1 | RowsecurityPolicyDatabaseEntry | not-accessible | current | Entry of securityPolicyDatabaseTable |
| 1.3.6.1.4.1.21296.1.2.39.10.1.1.1 | ColumnsecurityPolicyDatabaseAssociatedSecureEntity | read-only | current | List of all SPD entries associated with with this far-end peer for which IKE negotiates security associations (keys). The SAs can either be for data path encry… |
| 1.3.6.1.4.1.21296.1.2.39.11 | NodeipsecSpdENTR | |||
| 1.3.6.1.4.1.21296.1.2.39.11.1 | TableipsecSpdENTRTable | not-accessible | current | A list of SPD entries associated with an IPSec IKEv2 peer. |
| 1.3.6.1.4.1.21296.1.2.39.11.1.1 | RowipsecSpdENTREntry | not-accessible | current | Entry of ipsecSpdENTRTable |
| 1.3.6.1.4.1.21296.1.2.39.11.1.1.1 | ColumnipsecSpdENTRName | read-only | current | A unique name to identify this SPD entry. |
| 1.3.6.1.4.1.21296.1.2.39.11.1.1.2 | ColumnipsecSpdENTRAID | read-only | current | A system-populated access identifier for this SPD entry. |
| 1.3.6.1.4.1.21296.1.2.39.11.1.1.3 | ColumnipsecSpdENTRPriority | read-only | current | A priority value for each SPD entry. This is used to give precedence to the SPD entries. |
| 1.3.6.1.4.1.21296.1.2.39.11.1.1.4 | ColumnipsecSpdENTRDescription | read-only | current | User configurable label/description. |
| 1.3.6.1.4.1.21296.1.2.39.11.1.1.5 | ColumnipsecSpdENTRAction | read-only | current | Indicates the IPsec treatment given to the IP datagrams. default value :protect |
| 1.3.6.1.4.1.21296.1.2.39.11.1.1.6 | ColumnipsecSpdENTRIpsecProtocol | read-only | current | Indicates the use of ESP or AH IPsec protocols. Conditions:../action = 'protect' default value :ESP |
| 1.3.6.1.4.1.21296.1.2.39.11.1.1.7 | ColumnipsecSpdENTRMode | read-only | current | Indicates if the IPsec session should operate in transport or tunnel mode. Conditions:../action = 'protect' default value :tunnel |
| 1.3.6.1.4.1.21296.1.2.39.11.1.1.8 | ColumnipsecSpdENTRAlarmReportControl | read-only | current | Controls the reporting of alarms for this particular object. default value :allowed |
| 1.3.6.1.4.1.21296.1.2.39.11.1.1.9 | ColumnipsecSpdENTRAntiReplayWindow | read-only | current | Indicates the replay window size tolerance. Conditions:../action = 'protect' default value :64 |
| 1.3.6.1.4.1.21296.1.2.39.11.1.1.10 | ColumnipsecSpdENTROperState | read-only | current | The operational state of this object. default value :disabled |
| 1.3.6.1.4.1.21296.1.2.39.11.1.1.11 | ColumnipsecSpdENTRDynamicTs | read-only | current | Indicates whether dynamic traffic selector is enabled in this SPD entry. default value :disabled |
| 1.3.6.1.4.1.21296.1.2.39.11.1.1.12 | ColumnipsecSpdENTREsn | read-only | current | Extended Sequence Number (ESN) support. default value :true |
| 1.3.6.1.4.1.21296.1.2.39.12 | NodeipsecTrafficSelector | |||
| 1.3.6.1.4.1.21296.1.2.39.12.1 | TableipsecTrafficSelectorTable | not-accessible | current | A list of traffic selectors associated with an IPSec SPD entry. |
| 1.3.6.1.4.1.21296.1.2.39.12.1.1 | RowipsecTrafficSelectorEntry | not-accessible | current | Entry of ipsecTrafficSelectorTable |
| 1.3.6.1.4.1.21296.1.2.39.12.1.1.1 | ColumnipsecTrafficSelectorName | read-only | current | A unique name to identify this IPsec traffic selector entry. |
| 1.3.6.1.4.1.21296.1.2.39.12.1.1.2 | ColumnipsecTrafficSelectorAID | read-only | current | A system-populated access identifier for this traffic selector entry. |
| 1.3.6.1.4.1.21296.1.2.39.12.1.1.3 | ColumnipsecTrafficSelectorNextLayerProtocol | read-only | current | Indicates the inner protocol (upper layer), obtained from the IPv4 protocol or the IPv6 next header field. default value :any |
| 1.3.6.1.4.1.21296.1.2.39.13 | NodelocalSubnet | |||
| 1.3.6.1.4.1.21296.1.2.39.13.1 | TablelocalSubnetTable | not-accessible | current | This is a list of ranges of IPv4/IPv6 addresses (unicast, broadcast (IPv4 only)). |
| 1.3.6.1.4.1.21296.1.2.39.13.1.1 | RowlocalSubnetEntry | not-accessible | current | Entry of localSubnetTable |
| 1.3.6.1.4.1.21296.1.2.39.13.1.1.1 | ColumnlocalSubnetPrefix | read-only | current | NULL |
| 1.3.6.1.4.1.21296.1.2.39.14 | NoderemoteSubnet | |||
| 1.3.6.1.4.1.21296.1.2.39.14.1 | TableremoteSubnetTable | not-accessible | current | This is a list of ranges of IPv4/IPv6 addresses (unicast, broadcast (IPv4 only)). |
| 1.3.6.1.4.1.21296.1.2.39.14.1.1 | RowremoteSubnetEntry | not-accessible | current | Entry of remoteSubnetTable |
| 1.3.6.1.4.1.21296.1.2.39.14.1.1.1 | ColumnremoteSubnetPrefix | read-only | current | NULL |
| 1.3.6.1.4.1.21296.1.2.39.15 | NodelocalPorts | |||
| 1.3.6.1.4.1.21296.1.2.39.15.1 | TablelocalPortsTable | not-accessible | current | A list of local ports ranges associated with this traffic selector. |
| 1.3.6.1.4.1.21296.1.2.39.15.1.1 | RowlocalPortsEntry | not-accessible | current | Entry of localPortsTable |
| 1.3.6.1.4.1.21296.1.2.39.15.1.1.1 | ColumnlocalPortsStart | read-only | current | The port number where the range starts or a predefined value (all, opaque). |
| 1.3.6.1.4.1.21296.1.2.39.15.1.1.2 | ColumnlocalPortsStop | read-only | current | The port number where the range ends. |
| 1.3.6.1.4.1.21296.1.2.39.16 | NoderemotePorts | |||
| 1.3.6.1.4.1.21296.1.2.39.16.1 | TableremotePortsTable | not-accessible | current | A list of remote ports ranges associated with this traffic selector. |
| 1.3.6.1.4.1.21296.1.2.39.16.1.1 | RowremotePortsEntry | not-accessible | current | Entry of remotePortsTable |
| 1.3.6.1.4.1.21296.1.2.39.16.1.1.1 | ColumnremotePortsStart | read-only | current | The port number where the range starts or a predefined value (all, opaque). |
| 1.3.6.1.4.1.21296.1.2.39.16.1.1.2 | ColumnremotePortsStop | read-only | current | The port number where the range ends |
| 1.3.6.1.4.1.21296.1.2.39.17 | NodeipsecSaProposal | |||
| 1.3.6.1.4.1.21296.1.2.39.17.1 | TableipsecSaProposalTable | not-accessible | current | A list of protocol proposals when negotiating the IPsec SA for this SPD entry with the far-end IKE peer. |
| 1.3.6.1.4.1.21296.1.2.39.17.1.1 | RowipsecSaProposalEntry | not-accessible | current | Entry of ipsecSaProposalTable |
| 1.3.6.1.4.1.21296.1.2.39.17.1.1.1 | ColumnipsecSaProposalNumber | read-only | current | The proposal number for the IPsec SA. |
| 1.3.6.1.4.1.21296.1.2.39.17.1.1.2 | ColumnipsecSaProposalProtocolId | read-only | current | The protocol ID (type) for which the IPsec Child SA proposal applies to. default value :ESP |
| 1.3.6.1.4.1.21296.1.2.39.17.1.1.3 | ColumnipsecSaProposalIntegrityAlgorithm | read-only | current | A list of IPsec SA integrity algorithms advertised to the far-end IKE peer.This is originally a YANG leaf-list, here encoded as a comma separated list of value… |
| 1.3.6.1.4.1.21296.1.2.39.17.1.1.4 | ColumnipsecSaProposalDhGroup | read-only | current | A list of IPsec SA Diffie-Hellman groups advertised to the far-end IKE peer. NOTE: The 'min-elements' is 1, which means perfect forward secrecy (PFS) for IPsec… |
| 1.3.6.1.4.1.21296.1.2.39.18 | NodeadditionalKeyExchange | |||
| 1.3.6.1.4.1.21296.1.2.39.18.1 | TableadditionalKeyExchangeTable | not-accessible | current | A list of additional Key Exchange (KE) methods used to perform hybrid key agreement which follows initial classical key exchange. |
| 1.3.6.1.4.1.21296.1.2.39.18.1.1 | RowadditionalKeyExchangeEntry | not-accessible | current | Entry of additionalKeyExchangeTable |
| 1.3.6.1.4.1.21296.1.2.39.18.1.1.1 | ColumnadditionalKeyExchangeId | read-only | current | The identifier for the additional key exchange group. |
| 1.3.6.1.4.1.21296.1.2.39.18.1.1.2 | ColumnadditionalKeyExchangeDhGroup | read-only | current | List of Key Exchange Methods (KEMs) for the additional key exchange.This is originally a YANG leaf-list, here encoded as a comma separated list of values. |
| 1.3.6.1.4.1.21296.1.2.40 | Nodeipsec | |||
| 1.3.6.1.4.1.21296.1.2.40.1 | NodeipsecSaReKey | |||
| 1.3.6.1.4.1.21296.1.2.40.1.1 | TableipsecSaReKeyTable | not-accessible | current | Contains the rekeying configurations of an IPSec SPD entry. |
| 1.3.6.1.4.1.21296.1.2.40.1.1.1 | RowipsecSaReKeyEntry | not-accessible | current | Entry of ipsecSaReKeyTable |
| 1.3.6.1.4.1.21296.1.2.40.1.1.1.1 | ColumnipsecSaReKeyFrequency | read-only | current | The rekeying frequency for the IPsec child security association with the far-end peer. UNITS:seconds default value :14400 |
| 1.3.6.1.4.1.21296.1.2.40.1.1.1.2 | ColumnipsecSaReKeyBytes | read-only | current | The rekeying frequency for the IPsec child security association with the far-end peer based on amount of bytes transmitted. UNITS:bytes default value :10737418… |
| 1.3.6.1.4.1.21296.1.2.40.1.1.1.3 | ColumnipsecSaReKeyPackets | read-only | current | The rekeying frequency for the IPsec child security association with the far-end peer based on amount of packets transmitted. UNITS:packets default value :disa… |
| 1.3.6.1.4.1.21296.1.2.41 | NodeprotectionGroup | |||
| 1.3.6.1.4.1.21296.1.2.41.2 | NodeprotectionGroupInfo | |||
| 1.3.6.1.4.1.21296.1.2.41.2.1 | TableprotectionGroupTable | not-accessible | current | Protection Group associates two Protection Units that are redundant to each other, one said Working, the other Protection Unit. Each Protection Group entity fo… |
| 1.3.6.1.4.1.21296.1.2.41.2.1.1 | RowprotectionGroupEntry | not-accessible | current | Entry of protectionGroupTable |
| 1.3.6.1.4.1.21296.1.2.41.2.1.1.1 | ColumnprotectionGroupName | read-only | current | A user configured name for the protection group. |
| 1.3.6.1.4.1.21296.1.2.41.2.1.1.2 | ColumnprotectionGroupAID | read-only | current | Resource Access Identifier (AID). Identifies an instance within a specific resource type. |
| 1.3.6.1.4.1.21296.1.2.41.2.1.1.3 | ColumnprotectionGroupLabel | read-only | current | The reply will be truncated in 128 bytes. User label. |
| 1.3.6.1.4.1.21296.1.2.41.2.1.1.4 | ColumnprotectionGroupProtectionType | read-only | current | Represents the protection type this PG has. |
| 1.3.6.1.4.1.21296.1.2.41.2.1.1.5 | ColumnprotectionGroupPgState | read-only | current | Protection group state default value :unavailable |
| 1.3.6.1.4.1.21296.1.2.41.2.1.1.6 | ColumnprotectionGroupPgRequest | read-only | current | The management of protection switching action. default value :clear |
| 1.3.6.1.4.1.21296.1.2.41.2.1.1.7 | ColumnprotectionGroupSwitchingMode | read-only | current | Protection switching mode. default value :unidirectional |
| 1.3.6.1.4.1.21296.1.2.41.2.1.1.8 | ColumnprotectionGroupReversionMode | read-only | current | Enable or disable automatic reversion protection status after wtr-time delay. default value :non-revertive |
| 1.3.6.1.4.1.21296.1.2.41.2.1.1.9 | ColumnprotectionGroupHoldOffTimer | read-only | current | Switching trigger soaking time before switching, measured and set in 1-millisecond steps. UNITS:milliseconds default value :0 |
| 1.3.6.1.4.1.21296.1.2.41.2.1.1.10 | ColumnprotectionGroupWtrTimer | read-only | current | Trigger clearance soaking time before reverting to the working protection unit, measured and set in 1-second steps. Only applicable in revertive mode. Conditio… |
| 1.3.6.1.4.1.21296.1.2.41.2.1.1.11 | ColumnprotectionGroupRemainingWtr | read-only | current | The remaining time in the WTR timer, in seconds. Only applicable in Revertive mode. Conditions:../reversion-mode = 'revertive' UNITS:seconds |
| 1.3.6.1.4.1.21296.1.2.41.2.1.1.12 | ColumnprotectionGroupLastSwitchTrigger | read-only | current | Last switch trigger. default value :clear |
| 1.3.6.1.4.1.21296.1.2.41.2.1.1.13 | ColumnprotectionGroupWorkingPu | read-only | current | The working unit associated with the protection group. |
| 1.3.6.1.4.1.21296.1.2.41.2.1.1.14 | ColumnprotectionGroupProtectionPu | read-only | current | The protection unit associated with the protection group. |
| 1.3.6.1.4.1.21296.1.2.41.2.1.1.15 | ColumnprotectionGroupClientSideOlosTrigger | read-only | current | Considers a local client-side RX OLOS defect as a trigger for switch-over. Only of relevance for protection type y-cable. default value :disabled |
| 1.3.6.1.4.1.21296.1.2.41.2.1.1.16 | ColumnprotectionGroupClientSideSdTrigger | read-only | current | Considers a local client-side RX SD defect as a trigger for switch-over. Only of relevance for protection type y-cable. default value :disabled |
| 1.3.6.1.4.1.21296.1.2.41.2.1.1.17 | ColumnprotectionGroupNetworkSideCsfTrigger | read-only | current | Considers a network-side ingress CSF defect as a trigger for switch-over. default value :disabled |
| 1.3.6.1.4.1.21296.1.2.41.2.1.1.18 | ColumnprotectionGroupAlarmReportControl | read-only | current | Controls the reporting of alarms for this particular object. default value :allowed |
| 1.3.6.1.4.1.21296.1.2.41.2.1.1.19 | ColumnprotectionGroupPgControlRequest | read-only | current | local command of protection. default value :clear-freeze |
| 1.3.6.1.4.1.21296.1.2.41.2.1.1.20 | ColumnprotectionGroupReliableCp | read-only | current | The reliable connection point associated with the protection group. Only of relevance for protection type snc-n. |
| 1.3.6.1.4.1.21296.1.2.41.2.1.1.21 | ColumnprotectionGroupNetworkSideSdTrigger | read-only | current | Considers a network-side ingress SD defect as a trigger for switch-over. Only of relevance for protection type snc-n. default value :disabled |
| 1.3.6.1.4.1.21296.1.2.41.2.1.1.22 | ColumnprotectionGroupSwitchFailureReason | read-only | current | switch failure reason. default value :none |
| 1.3.6.1.4.1.21296.1.2.41.3 | NodeprotectionUnit | |||
| 1.3.6.1.4.1.21296.1.2.41.3.1 | TableprotectionUnitTable | not-accessible | current | Protection unit that identifier protection entitiy |
| 1.3.6.1.4.1.21296.1.2.41.3.1.1 | RowprotectionUnitEntry | not-accessible | current | Entry of protectionUnitTable |
| 1.3.6.1.4.1.21296.1.2.41.3.1.1.1 | ColumnprotectionUnitName | read-only | current | Protection unit name |
| 1.3.6.1.4.1.21296.1.2.41.3.1.1.2 | ColumnprotectionUnitAID | read-only | current | Resource Access Identifier (AID). Identifies an instance within a specific resource type. |
| 1.3.6.1.4.1.21296.1.2.41.3.1.1.3 | ColumnprotectionUnitTransportEntity | read-only | current | The transport entity associated with this protection unit. |
| 1.3.6.1.4.1.21296.1.2.41.3.1.1.4 | ColumnprotectionUnitState | read-only | current | Protection unit state default value :unknown |
| 1.3.6.1.4.1.21296.1.2.41.3.1.1.5 | ColumnprotectionUnitRole | read-only | current | Protection unit role |
| 1.3.6.1.4.1.21296.1.2.41.3.1.1.6 | ColumnprotectionUnitAlarmReportControl | read-only | current | Controls the reporting of alarms for this particular object. default value :allowed |
| 1.3.6.1.4.1.21296.1.2.41.3.1.1.7 | ColumnprotectionUnitLabel | read-only | current | The reply will be truncated in 128 bytes. User label. |
| 1.3.6.1.4.1.21296.1.2.41.4 | NodeopticalSwitch | |||
| 1.3.6.1.4.1.21296.1.2.41.4.1 | TableopticalSwitchTable | not-accessible | current | optical-switch 'Protection Group' (PG) |
| 1.3.6.1.4.1.21296.1.2.41.4.1.1 | RowopticalSwitchEntry | not-accessible | current | Entry of opticalSwitchTable |
| 1.3.6.1.4.1.21296.1.2.41.4.1.1.1 | ColumnopticalSwitchName | read-only | current | Fixed name, this is autonomously created by the system. |
| 1.3.6.1.4.1.21296.1.2.41.4.1.1.2 | ColumnopticalSwitchAID | read-only | current | Resource Access Identifier (AID). Identifies an instance within a specific resource type. |
| 1.3.6.1.4.1.21296.1.2.41.4.1.1.3 | ColumnopticalSwitchLabel | read-only | current | The reply will be truncated in 128 bytes. User label. |
| 1.3.6.1.4.1.21296.1.2.41.4.1.1.4 | ColumnopticalSwitchAlarmReportControl | read-only | current | Controls the reporting of alarms for this particular object. default value :allowed |
| 1.3.6.1.4.1.21296.1.2.41.4.1.1.5 | ColumnopticalSwitchSupportingCard | read-only | current | Protection card. |
| 1.3.6.1.4.1.21296.1.2.41.4.1.1.7 | ColumnopticalSwitchSupportingProtectionPort | read-only | current | Protection port. |
| 1.3.6.1.4.1.21296.1.2.41.4.1.1.8 | ColumnopticalSwitchProtectionType | read-only | current | Represents the protection type of this PG. |
| 1.3.6.1.4.1.21296.1.2.41.4.1.1.9 | ColumnopticalSwitchPgState | read-only | current | Protection group state default value :no-request |
| 1.3.6.1.4.1.21296.1.2.41.4.1.1.10 | ColumnopticalSwitchActivePath | read-only | current | Protection active path (working/ protection). default value :working |
| 1.3.6.1.4.1.21296.1.2.41.4.1.1.11 | ColumnopticalSwitchSwitchingMode | read-only | current | Protection switching mode. default value :unidirectional |
| 1.3.6.1.4.1.21296.1.2.41.4.1.1.12 | ColumnopticalSwitchReversionMode | read-only | current | Enable or disable automatic reversion protection status after wtr-time delay. default value :non-revertive |
| 1.3.6.1.4.1.21296.1.2.41.4.1.1.13 | ColumnopticalSwitchHoldOffTimer | read-only | current | Switching trigger soaking time before switching, measured and set in 1-millisecond steps. UNITS:milliseconds default value :0 |
| 1.3.6.1.4.1.21296.1.2.41.4.1.1.14 | ColumnopticalSwitchWtrTimer | read-only | current | Wait to Restore Timer: clearance soaking time before reverting to the working leg. Only applicable in revertive mode. Conditions:../reversion-mode = 'revertive… |
| 1.3.6.1.4.1.21296.1.2.41.4.1.1.15 | ColumnopticalSwitchLastRequest | read-only | current | Last user request. default value :not-applicable |
| 1.3.6.1.4.1.21296.1.2.41.4.1.1.16 | ColumnopticalSwitchLastSwitchTrigger | read-only | current | Last switch trigger. default value :not-applicable |
| 1.3.6.1.4.1.21296.1.2.41.4.1.1.19 | ColumnopticalSwitchWorkingSwitchThreshold | read-only | current | The switching threshold of the working port which indicates the optical power threshold of signal degrade. default value :-18.0 |
| 1.3.6.1.4.1.21296.1.2.41.4.1.1.20 | ColumnopticalSwitchProtectionSwitchThreshold | read-only | current | The switching threshold of the protection port which indicates the optical power threshold of signal degrade. default value :-18.0 |
| 1.3.6.1.4.1.21296.1.2.41.4.1.1.21 | ColumnopticalSwitchWorkingLosThreshold | read-only | current | The switching threshold of the working port, power level below it will lead to loss of signal. default value :-23.0 |
| 1.3.6.1.4.1.21296.1.2.41.4.1.1.22 | ColumnopticalSwitchProtectionLosThreshold | read-only | current | The switching threshold of the protection port, power level below it will lead to loss of signal. default value :-23.0 |
| 1.3.6.1.4.1.21296.1.2.41.4.1.1.26 | ColumnopticalSwitchSupportingWorkingPort | read-only | current | Working port. |
| 1.3.6.1.4.1.21296.1.2.41.4.1.1.28 | ColumnopticalSwitchOchCenterFrequency | read-only | current | The frequency of Optical Protection switch, which will decide the pilot tone modulated on the channel. Conditions:../protection-type = 'och-ls' UNITS:MHz defau… |
| 1.3.6.1.4.1.21296.1.2.41.4.1.1.29 | ColumnopticalSwitchWorkingPathDegree | read-only | current | The degree number of the working path degree. The value of zero denotes that the working path degree is not associated yet. default value :0 |
| 1.3.6.1.4.1.21296.1.2.41.4.1.1.30 | ColumnopticalSwitchProtectionPathDegree | read-only | current | The degree number of the protection path degree. default value :0 |
| 1.3.6.1.4.1.21296.1.2.41.4.1.1.31 | ColumnopticalSwitchSwitchThresholdEnable | read-only | current | Enables protection switching based on SD threshold configured for Working and Protection Paths. default value :disabled |
| 1.3.6.1.4.1.21296.1.2.41.4.1.1.32 | ColumnopticalSwitchWavelengthBand | read-only | current | Wavelength band o-band(1310), c-band(1550) are used for internal PD calibration and IL test. Conditions:../protection-type = 'och-cs' default value :c-band |
| 1.3.6.1.4.1.21296.1.2.41.4.1.1.33 | ColumnopticalSwitchSwitchRole | read-only | current | Indication for the cascading/ non-cascading OPSM switch role of the optical-switch. default value :standalone |
| 1.3.6.1.4.1.21296.1.2.41.4.1.1.34 | ColumnopticalSwitchOperState | read-only | current | The operational state of this object. default value :disabled |
| 1.3.6.1.4.1.21296.1.2.41.4.1.1.35 | ColumnopticalSwitchAvailState | read-only | current | Availability state of an entity. |
| 1.3.6.1.4.1.21296.1.2.41.4.1.1.36 | ColumnopticalSwitchFacilityLosThreshold | read-only | current | The threshold of the facility port, power level below it will lead to loss of signal. default value :-30.0 |
| 1.3.6.1.4.1.21296.1.2.41.4.1.1.37 | ColumnopticalSwitchLosThresholdHysteresis | read-only | current | SF/SD hysteresis for OPSM. UNITS:dB default value :3.0 |
| 1.3.6.1.4.1.21296.1.2.41.4.1.1.38 | ColumnopticalSwitchSwitchThresholdHysteresis | read-only | current | SF/SD hysteresis for OPSM. UNITS:dB default value :2.0 |
| 1.3.6.1.4.1.21296.1.2.41.4.1.1.39 | ColumnopticalSwitchProtectionModel | read-only | current | Represents the protection model of this PG. default value :one-plus-one |
| 1.3.6.1.4.1.21296.1.2.41.4.1.1.40 | ColumnopticalSwitchBandProtectionPolicy | read-only | current | Band protection policy indicates how the band failures should be handled for switching. Conditions:../protection-type = 'oms-cl' default value :single-band-fail |
| 1.3.6.1.4.1.21296.1.2.41.4.1.1.41 | ColumnopticalSwitchPreferredProtectPaths | read-only | current | The order in which protect paths should be considered on a protection switch.This is originally a YANG leaf-list, here encoded as a comma separated list of val… |
| 1.3.6.1.4.1.21296.1.2.41.4.1.1.42 | ColumnopticalSwitchHotStandbyPaths | read-only | current | The list of healthy paths that are ready to takeover on a protection switch.This is originally a YANG leaf-list, here encoded as a comma separated list of valu… |
| 1.3.6.1.4.1.21296.1.2.41.5 | NodeopticalSwitchPath | |||
| 1.3.6.1.4.1.21296.1.2.41.5.1 | TableopticalSwitchPathTable | not-accessible | current | Optical Switch Path (working/protect) level configuration. |
| 1.3.6.1.4.1.21296.1.2.41.5.1.1 | RowopticalSwitchPathEntry | not-accessible | current | Entry of opticalSwitchPathTable |
| 1.3.6.1.4.1.21296.1.2.41.5.1.1.1 | ColumnopticalSwitchPathName | read-only | current | The name of the optical-switch path - identified by port name. |
| 1.3.6.1.4.1.21296.1.2.41.5.1.1.2 | ColumnopticalSwitchPathSupportingPort | read-only | current | Supporting OPSM port. |
| 1.3.6.1.4.1.21296.1.2.41.5.1.1.3 | ColumnopticalSwitchPathCbandLosThreshold | read-only | current | The LOS threshold of the C-Band signal on the path, power level below it will lead to LOS (SF). Conditions:../../protection-type = 'oms-c' or ../../protection-… |
| 1.3.6.1.4.1.21296.1.2.41.5.1.1.4 | ColumnopticalSwitchPathLbandLosThreshold | read-only | current | The LOS threshold of the L-Band signal on the path, power level below it will lead to LOS (SF). Conditions:../../protection-type = 'oms-l' or ../../protection-… |
| 1.3.6.1.4.1.21296.1.2.41.5.1.1.5 | ColumnopticalSwitchPathCbandSwitchThreshold | read-only | current | The Switch threshold of the C-Band signal on the path, power level below it will lead to SD. Conditions:../../protection-type = 'oms-c' or ../../protection-typ… |
| 1.3.6.1.4.1.21296.1.2.41.5.1.1.6 | ColumnopticalSwitchPathLbandSwitchThreshold | read-only | current | The Switch threshold of the L-Band signal on the path, power level below it will lead to SD. Conditions:../../protection-type = 'oms-l' or ../../protection-typ… |
| 1.3.6.1.4.1.21296.1.2.42 | Nodeots | |||
| 1.3.6.1.4.1.21296.1.2.42.1 | NodeotsInfo | |||
| 1.3.6.1.4.1.21296.1.2.42.1.1 | TableotsTable | not-accessible | current | OTS: Optical Transmission Section facility. |
| 1.3.6.1.4.1.21296.1.2.42.1.1.1 | RowotsEntry | not-accessible | current | Entry of otsTable |
| 1.3.6.1.4.1.21296.1.2.42.1.1.1.1 | ColumnotsName | read-only | current | A generic, configurable name for every facility. |
| 1.3.6.1.4.1.21296.1.2.42.1.1.1.2 | ColumnotsSupportingCard | read-only | current | Card that holds this facility |
| 1.3.6.1.4.1.21296.1.2.42.1.1.1.3 | ColumnotsSupportingPort | read-only | current | Ports that hold this facilityThis is originally a YANG leaf-list, here encoded as a comma separated list of values. |
| 1.3.6.1.4.1.21296.1.2.42.1.1.1.4 | ColumnotsSupportingFacilities | read-only | current | An XPath reference to the parent facilities.This is originally a YANG leaf-list, here encoded as a comma separated list of values. |
| 1.3.6.1.4.1.21296.1.2.42.1.1.1.5 | ColumnotsSupportedFacilities | read-only | current | An XPath reference to the children facilities.This is originally a YANG leaf-list, here encoded as a comma separated list of values. |
| 1.3.6.1.4.1.21296.1.2.42.1.1.1.6 | ColumnotsAID | read-only | current | Resource Access Identifier (AID). Identifies an instance within a specific resource type. |
| 1.3.6.1.4.1.21296.1.2.42.1.1.1.7 | ColumnotsLabel | read-only | current | The reply will be truncated in 128 bytes. User label. |
| 1.3.6.1.4.1.21296.1.2.42.1.1.1.8 | ColumnotsAdminState | read-only | current | The administrative state of the managed object. default value :unlock |
| 1.3.6.1.4.1.21296.1.2.42.1.1.1.9 | ColumnotsOperState | read-only | current | The operational state of this object. default value :disabled |
| 1.3.6.1.4.1.21296.1.2.42.1.1.1.10 | ColumnotsAvailState | read-only | current | Availability state of an entity. |
| 1.3.6.1.4.1.21296.1.2.42.1.1.1.11 | ColumnotsManagedBy | read-only | current | Describes whether this managed entity was system created or not. Only user created entities can be user deleted. default value :system |
| 1.3.6.1.4.1.21296.1.2.42.1.1.1.12 | ColumnotsAlarmReportControl | read-only | current | Controls the reporting of alarms for this particular object. default value :allowed |
| 1.3.6.1.4.1.21296.1.2.42.1.1.1.13 | ColumnotsOscLess | read-only | current | OSC-less mode is required to provide interworking with systems with no compatible OSC or spans with losses not compatible with the OSC budget. default value :d… |
| 1.3.6.1.4.1.21296.1.2.42.1.1.1.14 | ColumnotsFiberTypeRx | read-only | current | Fiber Type (OTS receiver) allows PCL to know the 'intercept' and 'slope'. default value :SSMF |
| 1.3.6.1.4.1.21296.1.2.42.1.1.1.15 | ColumnotsFiberTypeTx | read-only | current | Fiber Type (OTS transmitter) allows PCL to know the 'intercept' and 'slope'. default value :SSMF |
| 1.3.6.1.4.1.21296.1.2.42.1.1.1.16 | ColumnotsFiberLengthTx | read-only | current | Transmitting Fiber Length default value :auto |
| 1.3.6.1.4.1.21296.1.2.42.1.1.1.17 | ColumnotsFiberLengthRx | read-only | current | Receiving Fiber Length. default value :auto |
| 1.3.6.1.4.1.21296.1.2.42.1.1.1.18 | ColumnotsFiberLengthDerivedRx | read-only | current | Estimated fiber length, calculated from the configured fiber-type and span loss measured via OSC powers. |
| 1.3.6.1.4.1.21296.1.2.42.1.1.1.19 | ColumnotsFiberSpectralAttenuationTiltTx | read-only | current | Since different transmission bands are supported, it is simpler to enter this parameter independent of the transmission bandwidth, hence per Terahertz. default… |
| 1.3.6.1.4.1.21296.1.2.42.1.1.1.20 | ColumnotsFiberSpectralAttenuationTiltRx | read-only | current | Since different transmission bands are supported, it is simpler to enter this parameter independent of the transmission bandwidth, hence per Terahertz. default… |
| 1.3.6.1.4.1.21296.1.2.42.1.1.1.21 | ColumnotsRamanCoefficientTx | read-only | current | Raman coefficient per Terahertz. Since different transmission bands are supported, it is simpler to enter this parameter independent of the transmission bandwi… |
| 1.3.6.1.4.1.21296.1.2.42.1.1.1.22 | ColumnotsRamanCoefficientRx | read-only | current | Raman coefficient per Terahertz. Since different transmission bands are supported, it is simpler to enter this parameter independent of the transmission bandwi… |
| 1.3.6.1.4.1.21296.1.2.42.1.1.1.23 | ColumnotsSpanLossTransmit | read-only | current | Fiber loss on the transmitter side (OTS-so). This is only the loss of the fiber. Additional loss such as coming from patch panel is entered via the external-at… |
| 1.3.6.1.4.1.21296.1.2.42.1.1.1.24 | ColumnotsSpanLossReceive | read-only | current | Fiber loss on the receiver side. (OTS-sk) This is only the loss of the fiber. |
| 1.3.6.1.4.1.21296.1.2.42.1.1.1.25 | ColumnotsSpanLossDerivedRx | read-only | current | Measured span loss (based on OSC). The value includes the losses external to the fiber. Conditions:../osc-less = 'disabled' default value :0 |
| 1.3.6.1.4.1.21296.1.2.42.1.1.1.26 | ColumnotsExternalAttenuationTx | read-only | current | External padding attenuation at transmitting direction. Required for tilt control. |
| 1.3.6.1.4.1.21296.1.2.42.1.1.1.27 | ColumnotsExternalAttenuationRx | read-only | current | External padding attenuation at receiving direction, for example, a patch-panel. |
| 1.3.6.1.4.1.21296.1.2.42.1.1.1.28 | ColumnotsSpanLossAgingMarginRx | read-only | current | Used by system for defining value of span loss high alarm. UNITS:dB default value :1.0 |
| 1.3.6.1.4.1.21296.1.2.42.1.1.1.29 | ColumnotsTargetPowerSetting | read-only | current | Allows automatic configuration of target values for oxcon. default value :auto |
| 1.3.6.1.4.1.21296.1.2.42.1.1.1.30 | ColumnotsLaserSafetyMode | read-only | current | Laser Safety Mode of the OTS instance. default value :OPLM |
| 1.3.6.1.4.1.21296.1.2.42.1.1.1.31 | ColumnotsOscCompatibility | read-only | current | Informs the system about the connected 7100 compatibility required. default value :osc-g30 |
| 1.3.6.1.4.1.21296.1.2.42.1.1.1.32 | ColumnotsOscLessSupport | read-only | current | 'true' if OTS port supports OSC-less operation. default value :true |
| 1.3.6.1.4.1.21296.1.2.42.1.1.1.33 | ColumnotsSpanLossReference | read-only | current | Configures span-loss source intended to be used by the system to calculate automatic target powers. default value :measured |
| 1.3.6.1.4.1.21296.1.2.42.1.1.1.34 | ColumnotsSpanLossAlarmThreshold | read-only | current | Configures the threshold for the SPAN-LOSS-HIGH alarm. Conditions:/ne/l0-mode-op != 'hsc-ols' and ../osc-less = 'disabled' default value :99 |
| 1.3.6.1.4.1.21296.1.2.42.1.1.1.35 | ColumnotsSpanLossDerivedTx | read-only | current | Measured span loss transmit. Conditions:../osc-less = 'disabled' default value :0 |
| 1.3.6.1.4.1.21296.1.2.42.1.1.1.36 | ColumnotsFiberLengthDerivedTx | read-only | current | Estimated fiber length, calculated from the configured fiber-type and span loss measured via OSC powers. |
| 1.3.6.1.4.1.21296.1.2.42.1.1.1.37 | ColumnotsEnableDcnInterworking | read-only | current | Controls whether DCN interworking with 7100 is required. Conditions:../osc-compatibility = 'osc-7100' default value :false |
| 1.3.6.1.4.1.21296.1.2.42.1.1.1.38 | ColumnotsLoadingPolicy | read-only | current | This is to indicate which policy to be used for a degree internally by Loading Manager for filtering loading requests. |
| 1.3.6.1.4.1.21296.1.2.42.1.1.1.39 | ColumnotsTargetPowerAdjustCband | read-only | current | User-defined C-band power offset. UNITS:dB default value :0.00 |
| 1.3.6.1.4.1.21296.1.2.42.1.1.1.40 | ColumnotsTargetPowerAdjustLband | read-only | current | User-defined L-band power offset. Only applicable for sleds supporting L-band. UNITS:dB default value :0.00 |
| 1.3.6.1.4.1.21296.1.2.42.1.1.1.41 | ColumnotsSpanLossBaselineRx | read-only | current | The Rx span loss baseline. Conditions:/ne/l0-mode-op ='hsc-ols' default value :99 |
| 1.3.6.1.4.1.21296.1.2.42.1.1.1.42 | ColumnotsSpanLossBaselineTx | read-only | current | The Tx span loss baseline. Conditions:/ne/l0-mode-op ='hsc-ols' default value :99 |
| 1.3.6.1.4.1.21296.1.2.42.2 | NodeotsDiagnostics | |||
| 1.3.6.1.4.1.21296.1.2.42.2.1 | TableotsDiagnosticsTable | not-accessible | current | OTS diagnostics |
| 1.3.6.1.4.1.21296.1.2.42.2.1.1 | RowotsDiagnosticsEntry | not-accessible | current | Entry of otsDiagnosticsTable |
| 1.3.6.1.4.1.21296.1.2.42.2.1.1.1 | ColumnotsDiagnosticsTtiStyle | read-only | current | TTI Style is set by application based on l0 mode operation, not configurable by user. default value :ITU-T-G709 |
| 1.3.6.1.4.1.21296.1.2.42.2.1.1.2 | ColumnotsDiagnosticsNmoperAlarmReporting | read-only | current | Indicates if a Neighbor Mismatch TTI Operator-Specific field based (NMOPER) alarm is reported or not. default value :disabled |
| 1.3.6.1.4.1.21296.1.2.42.2.1.1.3 | ColumnotsDiagnosticsExpectedOperator | read-only | current | The expected operator specific bytes. default value : |
| 1.3.6.1.4.1.21296.1.2.42.2.1.1.4 | ColumnotsDiagnosticsTxOperator | read-only | current | Filled by the System. Cannot be written by the user. |
| 1.3.6.1.4.1.21296.1.2.42.2.1.1.5 | ColumnotsDiagnosticsRxOperator | read-only | current | The received operation specific bytes as an ASCII string; will not be available if bytes cannot be encoded as a printable string. |
| 1.3.6.1.4.1.21296.1.2.42.2.1.1.6 | ColumnotsDiagnosticsTtiPortId | read-only | current | port-id in OTS tti is the AID of the port but limited to 32 printable characters. Conditions:../tti-style = 'proprietary' |
| 1.3.6.1.4.1.21296.1.2.42.3 | NodeotsLocal | |||
| 1.3.6.1.4.1.21296.1.2.42.3.1 | TableotsLocalTable | not-accessible | current | Local OTS facility: common facility attributes, external attenuation, and OTS diagnostics (e.g. port-scoped line OTS for ILA / reduced topology). |
| 1.3.6.1.4.1.21296.1.2.42.3.1.1 | RowotsLocalEntry | not-accessible | current | Entry of otsLocalTable |
| 1.3.6.1.4.1.21296.1.2.42.3.1.1.1 | ColumnotsLocalName | read-only | current | A generic, configurable name for every facility. |
| 1.3.6.1.4.1.21296.1.2.42.3.1.1.2 | ColumnotsLocalSupportingCard | read-only | current | Card that holds this facility |
| 1.3.6.1.4.1.21296.1.2.42.3.1.1.3 | ColumnotsLocalSupportingPort | read-only | current | Ports that hold this facilityThis is originally a YANG leaf-list, here encoded as a comma separated list of values. |
| 1.3.6.1.4.1.21296.1.2.42.3.1.1.4 | ColumnotsLocalSupportingFacilities | read-only | current | An XPath reference to the parent facilities.This is originally a YANG leaf-list, here encoded as a comma separated list of values. |
| 1.3.6.1.4.1.21296.1.2.42.3.1.1.5 | ColumnotsLocalSupportedFacilities | read-only | current | An XPath reference to the children facilities.This is originally a YANG leaf-list, here encoded as a comma separated list of values. |
| 1.3.6.1.4.1.21296.1.2.42.3.1.1.6 | ColumnotsLocalAID | read-only | current | Resource Access Identifier (AID). Identifies an instance within a specific resource type. |
| 1.3.6.1.4.1.21296.1.2.42.3.1.1.7 | ColumnotsLocalLabel | read-only | current | The reply will be truncated in 128 bytes. User label. |
| 1.3.6.1.4.1.21296.1.2.42.3.1.1.8 | ColumnotsLocalAdminState | read-only | current | The administrative state of the managed object. default value :unlock |
| 1.3.6.1.4.1.21296.1.2.42.3.1.1.9 | ColumnotsLocalOperState | read-only | current | The operational state of this object. default value :disabled |
| 1.3.6.1.4.1.21296.1.2.42.3.1.1.10 | ColumnotsLocalAvailState | read-only | current | Availability state of an entity. |
| 1.3.6.1.4.1.21296.1.2.42.3.1.1.11 | ColumnotsLocalManagedBy | read-only | current | Describes whether this managed entity was system created or not. Only user created entities can be user deleted. default value :system |
| 1.3.6.1.4.1.21296.1.2.42.3.1.1.12 | ColumnotsLocalAlarmReportControl | read-only | current | Controls the reporting of alarms for this particular object. default value :allowed |
| 1.3.6.1.4.1.21296.1.2.42.3.1.1.13 | ColumnotsLocalExternalAttenuationTx | read-only | current | External padding attenuation at transmitting direction. Required for tilt control where applicable. |
| 1.3.6.1.4.1.21296.1.2.42.3.1.1.14 | ColumnotsLocalExternalAttenuationRx | read-only | current | External padding attenuation at receiving direction, for example, a patch-panel. |
| 1.3.6.1.4.1.21296.1.2.42.4 | NodeotsAutoOtdr | |||
| 1.3.6.1.4.1.21296.1.2.42.4.1 | TableotsAutoOtdrTable | not-accessible | current | Automatic OTDR configuration and measurement results for this OTS facility. Enables automatic fiber-cut detection and fiber-recovery verification via periodic … |
| 1.3.6.1.4.1.21296.1.2.42.4.1.1 | RowotsAutoOtdrEntry | not-accessible | current | Entry of otsAutoOtdrTable |
| 1.3.6.1.4.1.21296.1.2.42.4.1.1.1 | ColumnotsAutoOtdrAutomaticOtdr | read-only | current | Enables or disables automatic OTDR scan triggering on this OTS span. When enabled, the system automatically initiates OTDR scans on fiber-cut or fiber-recovery… |
| 1.3.6.1.4.1.21296.1.2.42.4.1.1.2 | ColumnotsAutoOtdrAutomaticBaseline | read-only | current | When enabled, OTDR scan results that meet quality criteria are automatically designated as baseline measurements. A maximum of 3 baseline results are retained … |
| 1.3.6.1.4.1.21296.1.2.42.4.1.1.3 | ColumnotsAutoOtdrExternalAttenuationRxMeasured | read-only | current | Exponentially weighted moving average (EWMA, alpha=0.2) of the external attenuation at the receiving direction of this OTS span, measured by the automatic OTDR… |
| 1.3.6.1.4.1.21296.1.2.42.4.1.1.4 | ColumnotsAutoOtdrExternalAttenuationTxMeasured | read-only | current | Exponentially weighted moving average (EWMA, alpha=0.2) of the external attenuation at the transmitting direction of this OTS span, measured by the automatic O… |
| 1.3.6.1.4.1.21296.1.2.43 | NodeotsR | |||
| 1.3.6.1.4.1.21296.1.2.43.1 | NodeotsRInfo | |||
| 1.3.6.1.4.1.21296.1.2.43.1.1 | TableotsRTable | not-accessible | current | OTS: Optical Transmission Section facility. |
| 1.3.6.1.4.1.21296.1.2.43.1.1.1 | RowotsREntry | not-accessible | current | Entry of otsRTable |
| 1.3.6.1.4.1.21296.1.2.43.1.1.1.1 | ColumnotsRName | read-only | current | A generic, configurable name for every facility. |
| 1.3.6.1.4.1.21296.1.2.43.1.1.1.2 | ColumnotsRSupportingCard | read-only | current | Card that holds this facility |
| 1.3.6.1.4.1.21296.1.2.43.1.1.1.3 | ColumnotsRSupportingPort | read-only | current | Ports that hold this facilityThis is originally a YANG leaf-list, here encoded as a comma separated list of values. |
| 1.3.6.1.4.1.21296.1.2.43.1.1.1.4 | ColumnotsRSupportingFacilities | read-only | current | An XPath reference to the parent facilities.This is originally a YANG leaf-list, here encoded as a comma separated list of values. |
| 1.3.6.1.4.1.21296.1.2.43.1.1.1.5 | ColumnotsRSupportedFacilities | read-only | current | An XPath reference to the children facilities.This is originally a YANG leaf-list, here encoded as a comma separated list of values. |
| 1.3.6.1.4.1.21296.1.2.43.1.1.1.6 | ColumnotsRAID | read-only | current | Resource Access Identifier (AID). Identifies an instance within a specific resource type. |
| 1.3.6.1.4.1.21296.1.2.43.1.1.1.7 | ColumnotsRLabel | read-only | current | The reply will be truncated in 128 bytes. User label. |
| 1.3.6.1.4.1.21296.1.2.43.1.1.1.8 | ColumnotsRAdminState | read-only | current | The administrative state of the managed object. default value :unlock |
| 1.3.6.1.4.1.21296.1.2.43.1.1.1.9 | ColumnotsROperState | read-only | current | The operational state of this object. default value :disabled |
| 1.3.6.1.4.1.21296.1.2.43.1.1.1.10 | ColumnotsRAvailState | read-only | current | Availability state of an entity. |
| 1.3.6.1.4.1.21296.1.2.43.1.1.1.11 | ColumnotsRManagedBy | read-only | current | Describes whether this managed entity was system created or not. Only user created entities can be user deleted. default value :system |
| 1.3.6.1.4.1.21296.1.2.43.1.1.1.12 | ColumnotsRAlarmReportControl | read-only | current | Controls the reporting of alarms for this particular object. default value :allowed |
| 1.3.6.1.4.1.21296.1.2.43.1.1.1.13 | ColumnotsRRequiredFiberTypeRx | read-only | current | The required Fiber Type on the DWDM Line, with reference for the Rx fiber. Only of relevance if control-mode = auto. And: when there is no fiber-connection. de… |
| 1.3.6.1.4.1.21296.1.2.43.1.1.1.14 | ColumnotsRConfiguredFiberTypeRx | read-only | current | The configured fiber-type-rx on EDFA. If control-mode = auto, it is simply the rx.required-fiber-type. |
| 1.3.6.1.4.1.21296.1.2.43.1.1.1.15 | ColumnotsRFiberLengthRx | read-only | current | Receiving Fiber Length UNITS:km default value :unspecified |
| 1.3.6.1.4.1.21296.1.2.43.1.1.1.16 | ColumnotsRConfiguredFiberLengthRx | read-only | current | The configured (receiving) fiber-length-rx on the amplifier. |
| 1.3.6.1.4.1.21296.1.2.43.1.1.1.17 | ColumnotsRSpanLossReceive | read-only | current | The Span Loss at the receiving dwdm-line. default value :99 |
| 1.3.6.1.4.1.21296.1.2.43.1.1.1.18 | ColumnotsRSpanLossAtAmplifier | read-only | current | The Span Loss detected at amplifier, when there is a fiber-connection from/ RPB to the amplifier. default value :99 |
| 1.3.6.1.4.1.21296.1.2.43.1.1.1.19 | ColumnotsRExternalAttenuationRx | read-only | current | Loss between Patch panel and the Raman dwdm-line Rx. |
| 1.3.6.1.4.1.21296.1.2.43.1.1.1.22 | ColumnotsRDeltaPointloss | read-only | current | Delta Pointloss (Rx) Additional attenuation that can be determined after turning up pumps. This is the fiber contribution for the pointloss: to be fine tuned i… |
| 1.3.6.1.4.1.21296.1.2.43.1.1.1.23 | ColumnotsRPowerActualRx | read-only | current | Optical power received, where applicable. |
| 1.3.6.1.4.1.21296.1.2.43.1.1.1.24 | ColumnotsRConnectedReference | read-only | current | Indicates the degree or direction reference the Raman is connected to. If connected to cards with ILA functionality, indicates the direction reference the Rama… |
| 1.3.6.1.4.1.21296.1.2.43.2 | NodeotsRAutoOtdr | |||
| 1.3.6.1.4.1.21296.1.2.43.2.1 | TableotsRAutoOtdrTable | not-accessible | current | OTS: Optical Transmission Section automatic otdr |
| 1.3.6.1.4.1.21296.1.2.43.2.1.1 | RowotsRAutoOtdrEntry | not-accessible | current | Entry of otsRAutoOtdrTable |
| 1.3.6.1.4.1.21296.1.2.43.2.1.1.1 | ColumnotsRAutoOtdrExternalAttenuationRxMeasured | read-only | current | The attribute holds the attenuation (point losses) value between the span fiber and DWDM Line-In port of the Raman card, that is measured by the automatic OTDR… |
| 1.3.6.1.4.1.21296.1.2.43.2.1.1.3 | ColumnotsRAutoOtdrTotalReflectanceRxMeasured | read-only | current | The attribute holds the total reflectance value between the span fiber and DWDM Line-In port of the Raman card, that is measured by the automatic OTDR Raman pr… |
| 1.3.6.1.4.1.21296.1.2.43.2.1.1.4 | ColumnotsRAutoOtdrLossCalibrationByOtdr | read-only | current | The attribute is user configurable to specify if external-attenuation values used in PCL should come from user-configured attributes or automatically measured … |
| 1.3.6.1.4.1.21296.1.2.43.2.1.1.5 | ColumnotsRAutoOtdrAutomaticOtdr | read-only | current | The attribute can enable/disable OTDR based automatic fiber check; on disabling, it terminates an ongoing automatic OTDR test. default value :disabled |
| 1.3.6.1.4.1.21296.1.2.43.2.1.1.6 | ColumnotsRAutoOtdrAutoOtdrState | read-only | current | This user-visible attribute is used by the system to keep a flag for the status of the automatic OTDR feature execution for the corresponding facility (ots or … |
| 1.3.6.1.4.1.21296.1.2.44 | Nodeosc | |||
| 1.3.6.1.4.1.21296.1.2.44.1 | NodeoscInfo | |||
| 1.3.6.1.4.1.21296.1.2.44.1.1 | TableoscTable | not-accessible | current | Represents the Optical Supervision Channel (OSC) facility. |
| 1.3.6.1.4.1.21296.1.2.44.1.1.1 | RowoscEntry | not-accessible | current | Entry of oscTable |
| 1.3.6.1.4.1.21296.1.2.44.1.1.1.1 | ColumnoscName | read-only | current | A generic, configurable name for every facility. |
| 1.3.6.1.4.1.21296.1.2.44.1.1.1.2 | ColumnoscSupportingCard | read-only | current | Card that holds this facility |
| 1.3.6.1.4.1.21296.1.2.44.1.1.1.3 | ColumnoscSupportingPort | read-only | current | Ports that hold this facilityThis is originally a YANG leaf-list, here encoded as a comma separated list of values. |
| 1.3.6.1.4.1.21296.1.2.44.1.1.1.4 | ColumnoscSupportingFacilities | read-only | current | An XPath reference to the parent facilities.This is originally a YANG leaf-list, here encoded as a comma separated list of values. |
| 1.3.6.1.4.1.21296.1.2.44.1.1.1.5 | ColumnoscSupportedFacilities | read-only | current | An XPath reference to the children facilities.This is originally a YANG leaf-list, here encoded as a comma separated list of values. |
| 1.3.6.1.4.1.21296.1.2.44.1.1.1.6 | ColumnoscAID | read-only | current | Resource Access Identifier (AID). Identifies an instance within a specific resource type. |
| 1.3.6.1.4.1.21296.1.2.44.1.1.1.7 | ColumnoscLabel | read-only | current | The reply will be truncated in 128 bytes. User label. |
| 1.3.6.1.4.1.21296.1.2.44.1.1.1.8 | ColumnoscAdminState | read-only | current | The administrative state of the managed object. default value :unlock |
| 1.3.6.1.4.1.21296.1.2.44.1.1.1.9 | ColumnoscOperState | read-only | current | The operational state of this object. default value :disabled |
| 1.3.6.1.4.1.21296.1.2.44.1.1.1.10 | ColumnoscAvailState | read-only | current | Availability state of an entity. |
| 1.3.6.1.4.1.21296.1.2.44.1.1.1.11 | ColumnoscManagedBy | read-only | current | Describes whether this managed entity was system created or not. Only user created entities can be user deleted. default value :system |
| 1.3.6.1.4.1.21296.1.2.44.1.1.1.12 | ColumnoscAlarmReportControl | read-only | current | Controls the reporting of alarms for this particular object. default value :allowed |
| 1.3.6.1.4.1.21296.1.2.44.1.1.1.13 | ColumnoscMonitoringMode | read-only | current | The monitoring mode on the OSC TP. default value :intrusive |
| 1.3.6.1.4.1.21296.1.2.44.1.1.1.14 | ColumnoscMode | read-only | current | OC-3 OSC format. Conditions:../monitoring-mode='intrusive' default value :OC3 |
| 1.3.6.1.4.1.21296.1.2.44.1.1.1.15 | ColumnoscWavelength | read-only | current | Indicates the wavelength of the OSC channel transmitted Conditions:../monitoring-mode='intrusive' UNITS:nm default value :0.0 |
| 1.3.6.1.4.1.21296.1.2.44.1.1.1.16 | ColumnoscControl | read-only | current | OSC control configuration. default value :auto |
| 1.3.6.1.4.1.21296.1.2.44.1.1.1.17 | ColumnoscTargetOutputPower | read-only | current | Transmit OSC power. UNITS:dBm default value :na |
| 1.3.6.1.4.1.21296.1.2.44.1.1.1.18 | ColumnoscVoaAttenuationTargetRx | read-only | current | Target Rx VOA value in case of manual control mode. default value :10 |
| 1.3.6.1.4.1.21296.1.2.44.1.1.1.19 | ColumnoscVoaAttenuationActualRx | read-only | current | Reports the actual VOA value as configured. System returns not-applicable when card or SFP is not actually equipped. Conditions:../monitoring-mode='intrusive' |
| 1.3.6.1.4.1.21296.1.2.44.1.1.1.20 | ColumnoscPowerActualRx | read-only | current | Optical Power Received, actual measurement. |
| 1.3.6.1.4.1.21296.1.2.44.1.1.1.21 | ColumnoscPowerActualTx | read-only | current | Optical Power Transmitted, actual measurement. |
| 1.3.6.1.4.1.21296.1.2.44.1.1.1.22 | ColumnoscTxPowerAdjustment | read-only | current | Adjustment to the automatically calculated Tx power target. UNITS:dB default value :0 |
| 1.3.6.1.4.1.21296.1.2.44.1.1.1.23 | ColumnosccSupport | read-only | current | OSC Control support. default value :true |
| 1.3.6.1.4.1.21296.1.2.44.1.1.1.24 | ColumnoscL0CommInterfaceType | read-only | current | OSC IETF ip-version (IPv4/ IPv6) default value :ipv4 |
| 1.3.6.1.4.1.21296.1.2.44.1.1.1.25 | ColumnoscLofSoakTimer | read-only | current | LOF soak timer configuration. default value :short |
| 1.3.6.1.4.1.21296.1.2.45 | Nodeops | |||
| 1.3.6.1.4.1.21296.1.2.45.1 | NodeopsInfo | |||
| 1.3.6.1.4.1.21296.1.2.45.1.1 | TableopsTable | not-accessible | current | OPS: Optical Physical Section facility. |
| 1.3.6.1.4.1.21296.1.2.45.1.1.1 | RowopsEntry | not-accessible | current | Entry of opsTable |
| 1.3.6.1.4.1.21296.1.2.45.1.1.1.1 | ColumnopsName | read-only | current | A generic, configurable name for every facility. |
| 1.3.6.1.4.1.21296.1.2.45.1.1.1.2 | ColumnopsSupportingCard | read-only | current | Card that holds this facility |
| 1.3.6.1.4.1.21296.1.2.45.1.1.1.3 | ColumnopsSupportingPort | read-only | current | Ports that hold this facilityThis is originally a YANG leaf-list, here encoded as a comma separated list of values. |
| 1.3.6.1.4.1.21296.1.2.45.1.1.1.4 | ColumnopsSupportingFacilities | read-only | current | An XPath reference to the parent facilities.This is originally a YANG leaf-list, here encoded as a comma separated list of values. |
| 1.3.6.1.4.1.21296.1.2.45.1.1.1.5 | ColumnopsSupportedFacilities | read-only | current | An XPath reference to the children facilities.This is originally a YANG leaf-list, here encoded as a comma separated list of values. |
| 1.3.6.1.4.1.21296.1.2.45.1.1.1.6 | ColumnopsAID | read-only | current | Resource Access Identifier (AID). Identifies an instance within a specific resource type. |
| 1.3.6.1.4.1.21296.1.2.45.1.1.1.7 | ColumnopsLabel | read-only | current | The reply will be truncated in 128 bytes. User label. |
| 1.3.6.1.4.1.21296.1.2.45.1.1.1.8 | ColumnopsAdminState | read-only | current | The administrative state of the managed object. default value :unlock |
| 1.3.6.1.4.1.21296.1.2.45.1.1.1.9 | ColumnopsOperState | read-only | current | The operational state of this object. default value :disabled |
| 1.3.6.1.4.1.21296.1.2.45.1.1.1.10 | ColumnopsAvailState | read-only | current | Availability state of an entity. |
| 1.3.6.1.4.1.21296.1.2.45.1.1.1.11 | ColumnopsManagedBy | read-only | current | Describes whether this managed entity was system created or not. Only user created entities can be user deleted. default value :system |
| 1.3.6.1.4.1.21296.1.2.45.1.1.1.12 | ColumnopsAlarmReportControl | read-only | current | Controls the reporting of alarms for this particular object. default value :allowed |
| 1.3.6.1.4.1.21296.1.2.45.1.1.1.13 | ColumnopsRole | read-only | current | Allows the user to configure the port role. default value :general-purpose |
| 1.3.6.1.4.1.21296.1.2.45.1.1.1.14 | ColumnopsSupportedRoles | read-only | current | The SYSTEM exposes what configurations are possible, for the purpose of managers being able to offer the appropriate options for the configuration of OPS role.… |
| 1.3.6.1.4.1.21296.1.2.45.1.1.1.15 | ColumnopsLocallyReserved | read-only | current | Exposes to the user whether the particular port (e.g. of an RD ADE port) is reserved for ASE Idler traffic. Conditions:/ne/l0-mode-op = 'slte' default value :f… |
| 1.3.6.1.4.1.21296.1.2.45.1.1.1.16 | ColumnopsInputPsdProfile | read-only | current | nominal expected tributary channel power density. UNITS:dBm/12.5GHz default value :-6 |
| 1.3.6.1.4.1.21296.1.2.45.1.1.1.17 | ColumnopsPortExpansion | read-only | current | Allows the user to configure the port expansion. default value :no |
| 1.3.6.1.4.1.21296.1.2.46 | Nodeoms | |||
| 1.3.6.1.4.1.21296.1.2.46.1 | NodeomsInfo | |||
| 1.3.6.1.4.1.21296.1.2.46.1.1 | TableomsTable | not-accessible | current | OMS: Optical Multiplex Section facility. |
| 1.3.6.1.4.1.21296.1.2.46.1.1.1 | RowomsEntry | not-accessible | current | Entry of omsTable |
| 1.3.6.1.4.1.21296.1.2.46.1.1.1.1 | ColumnomsName | read-only | current | A generic, configurable name for every facility. |
| 1.3.6.1.4.1.21296.1.2.46.1.1.1.2 | ColumnomsSupportingCard | read-only | current | Card that holds this facility |
| 1.3.6.1.4.1.21296.1.2.46.1.1.1.3 | ColumnomsSupportingPort | read-only | current | Ports that hold this facilityThis is originally a YANG leaf-list, here encoded as a comma separated list of values. |
| 1.3.6.1.4.1.21296.1.2.46.1.1.1.4 | ColumnomsSupportingFacilities | read-only | current | An XPath reference to the parent facilities.This is originally a YANG leaf-list, here encoded as a comma separated list of values. |
| 1.3.6.1.4.1.21296.1.2.46.1.1.1.5 | ColumnomsSupportedFacilities | read-only | current | An XPath reference to the children facilities.This is originally a YANG leaf-list, here encoded as a comma separated list of values. |
| 1.3.6.1.4.1.21296.1.2.46.1.1.1.6 | ColumnomsAID | read-only | current | Resource Access Identifier (AID). Identifies an instance within a specific resource type. |
| 1.3.6.1.4.1.21296.1.2.46.1.1.1.7 | ColumnomsLabel | read-only | current | The reply will be truncated in 128 bytes. User label. |
| 1.3.6.1.4.1.21296.1.2.46.1.1.1.8 | ColumnomsAdminState | read-only | current | The administrative state of the managed object. default value :unlock |
| 1.3.6.1.4.1.21296.1.2.46.1.1.1.9 | ColumnomsOperState | read-only | current | The operational state of this object. default value :disabled |
| 1.3.6.1.4.1.21296.1.2.46.1.1.1.10 | ColumnomsAvailState | read-only | current | Availability state of an entity. |
| 1.3.6.1.4.1.21296.1.2.46.1.1.1.11 | ColumnomsManagedBy | read-only | current | Describes whether this managed entity was system created or not. Only user created entities can be user deleted. default value :system |
| 1.3.6.1.4.1.21296.1.2.46.1.1.1.12 | ColumnomsAlarmReportControl | read-only | current | Controls the reporting of alarms for this particular object. default value :allowed |
| 1.3.6.1.4.1.21296.1.2.46.1.1.1.13 | ColumnomsMonitoringMode | read-only | current | OMS monitoring mode default value :intrusive |
| 1.3.6.1.4.1.21296.1.2.46.1.1.1.14 | ColumnomsPowerActualRx | read-only | current | Optical Power Received, actual measurement. |
| 1.3.6.1.4.1.21296.1.2.46.1.1.1.15 | ColumnomsPowerActualTx | read-only | current | Optical Power Transmitted, actual measurement. |
| 1.3.6.1.4.1.21296.1.2.46.1.1.1.16 | ColumnomsGridMode | read-only | current | Indicates Grid type of the OMS layer. - flexible: allows user to create/ delete of MC with different widths; - otherwise, allows user to create MC with specifi… |
| 1.3.6.1.4.1.21296.1.2.46.1.1.1.17 | ColumnomsAttenuationControlModeRx | read-only | current | Attenuation control mode Rx (input) of the channel applicable to all channels of the OMS. Conditions:../monitoring-mode = 'intrusive' or ../monitoring-mode = '… |
| 1.3.6.1.4.1.21296.1.2.46.1.1.1.18 | ColumnomsAttenuationControlModeTx | read-only | current | Attenuation control mode Tx (output) of the channel applicable to all channels of the OMS. Conditions:../monitoring-mode = 'intrusive' default value :auto |
| 1.3.6.1.4.1.21296.1.2.46.1.1.1.19 | ColumnomsWssLess | read-only | current | True if there is no WSS component in the Degree. default value :false |
| 1.3.6.1.4.1.21296.1.2.46.1.1.1.20 | ColumnomsAssignedDegree | read-only | current | Display degree number when card is added in modules-degree. default value :0 |
| 1.3.6.1.4.1.21296.1.2.46.1.1.1.21 | ColumnomsGridModeSupport | read-only | current | Which C-band is supported, for the purpose of grid-mode configuration. default value :general-c-band |
| 1.3.6.1.4.1.21296.1.2.46.1.1.1.22 | ColumnomsBandsSupportedLink | read-only | current | The evaluated link capability, based on OSC information. default value :standardC-band-only |
| 1.3.6.1.4.1.21296.1.2.46.1.1.1.23 | ColumnomsBandAllowed | read-only | current | The allowed band for Rx / Tx at this OMS facility. |
| 1.3.6.1.4.1.21296.1.2.46.1.1.1.24 | ColumnomsBandActual | read-only | current | Actual band negotiated at the link. |
| 1.3.6.1.4.1.21296.1.2.46.1.1.1.25 | ColumnomsBandTarget | read-only | current | Derived band at ILA amplifier, or received band from OSC. default value :not-applicable |
| 1.3.6.1.4.1.21296.1.2.46.1.1.1.26 | ColumnomsLowerFrequency | read-only | current | The lowest frequency an mc/ nmc can be using. Default is 191.3 THz (standardC-band lowest frequency). default value :191300000 |
| 1.3.6.1.4.1.21296.1.2.46.1.1.1.27 | ColumnomsUpperFrequency | read-only | current | The highest frequency an mc/ nmc can be using. Default is 196.15 THz (standardC-band highest frequency). default value :196150000 |
| 1.3.6.1.4.1.21296.1.2.46.1.1.1.28 | ColumnomsTargetOutputPower | read-only | current | OMS Target Output Power Conditions:/ne/l0-mode-op ='slte' default value :5 |
| 1.3.6.1.4.1.21296.1.2.46.1.1.1.29 | ColumnomsConfiguredSpectrum | read-only | current | List of lower and upper frequency values of the usable spectrum configured for SLTE deployments.This is originally a YANG leaf-list, here encoded as a comma se… |
| 1.3.6.1.4.1.21296.1.2.46.1.1.1.30 | ColumnomsMonitoringState | read-only | current | System reports this attribute to indicate whether the oms is intended to be in use (instead of simply being pre-provisioned); when oms is created the monitorin… |
| 1.3.6.1.4.1.21296.1.2.46.1.1.1.31 | ColumnomsMinWssBiasTx | read-only | current | Min mux wss attenuation bias that must be maintained when oms.attenuation-control-mode=auto and amplifier.control-mode=auto for card-mode=slte and slte-backhau… |
| 1.3.6.1.4.1.21296.1.2.46.1.1.1.32 | ColumnomsAttenuationControlStateTx | read-only | current | Attenuation control state Tx (output) of the channel. |
| 1.3.6.1.4.1.21296.1.2.46.1.1.1.33 | ColumnomsAttenuationControlStateRx | read-only | current | Attenuation control state Rx (input) of the channel. |
| 1.3.6.1.4.1.21296.1.2.46.1.1.1.34 | ColumnomsControlSpeedFactor | read-only | current | Control speed factor for OMS. Used in DGE power control. Conditions:../monitoring-mode = 'ila-with-equalization' and /ne/l0-mode-op = 'standard' default value … |
| 1.3.6.1.4.1.21296.1.2.46.2 | Nodespectrum | |||
| 1.3.6.1.4.1.21296.1.2.46.2.1 | TablespectrumTable | not-accessible | current | OMS specific equalization within interstage access; and monitoring. |
| 1.3.6.1.4.1.21296.1.2.46.2.1.1 | RowspectrumEntry | not-accessible | current | Entry of spectrumTable |
| 1.3.6.1.4.1.21296.1.2.46.2.1.1.1 | ColumnspectrumName | read-only | current | A generic, configurable name for every facility. |
| 1.3.6.1.4.1.21296.1.2.46.2.1.1.2 | ColumnspectrumSupportingCard | read-only | current | Card that holds this facility |
| 1.3.6.1.4.1.21296.1.2.46.2.1.1.3 | ColumnspectrumSupportingPort | read-only | current | Ports that hold this facilityThis is originally a YANG leaf-list, here encoded as a comma separated list of values. |
| 1.3.6.1.4.1.21296.1.2.46.2.1.1.4 | ColumnspectrumSupportingFacilities | read-only | current | An XPath reference to the parent facilities.This is originally a YANG leaf-list, here encoded as a comma separated list of values. |
| 1.3.6.1.4.1.21296.1.2.46.2.1.1.5 | ColumnspectrumSupportedFacilities | read-only | current | An XPath reference to the children facilities.This is originally a YANG leaf-list, here encoded as a comma separated list of values. |
| 1.3.6.1.4.1.21296.1.2.46.2.1.1.6 | ColumnspectrumAID | read-only | current | Resource Access Identifier (AID). Identifies an instance within a specific resource type. |
| 1.3.6.1.4.1.21296.1.2.46.2.1.1.7 | ColumnspectrumLabel | read-only | current | The reply will be truncated in 128 bytes. User label. |
| 1.3.6.1.4.1.21296.1.2.46.2.1.1.8 | ColumnspectrumAdminState | read-only | current | The administrative state of the managed object. default value :unlock |
| 1.3.6.1.4.1.21296.1.2.46.2.1.1.9 | ColumnspectrumOperState | read-only | current | The operational state of this object. default value :disabled |
| 1.3.6.1.4.1.21296.1.2.46.2.1.1.10 | ColumnspectrumAvailState | read-only | current | Availability state of an entity. |
| 1.3.6.1.4.1.21296.1.2.46.2.1.1.11 | ColumnspectrumManagedBy | read-only | current | Describes whether this managed entity was system created or not. Only user created entities can be user deleted. default value :system |
| 1.3.6.1.4.1.21296.1.2.46.2.1.1.12 | ColumnspectrumAlarmReportControl | read-only | current | Controls the reporting of alarms for this particular object. default value :allowed |
| 1.3.6.1.4.1.21296.1.2.46.2.1.1.13 | ColumnspectrumDgeInUse | read-only | current | Reports true if corresponding OMS monitoring-mode is ila-with-equalization |
| 1.3.6.1.4.1.21296.1.2.46.2.1.1.14 | ColumnspectrumAttenuationSetting | read-only | current | Entire spectrum attenuation default value :0 |
| 1.3.6.1.4.1.21296.1.2.46.3 | NodespectrumControl | |||
| 1.3.6.1.4.1.21296.1.2.46.3.1 | TablespectrumControlTable | not-accessible | current | DGE optical attenuation |
| 1.3.6.1.4.1.21296.1.2.46.3.1.1 | RowspectrumControlEntry | not-accessible | current | Entry of spectrumControlTable |
| 1.3.6.1.4.1.21296.1.2.46.3.1.1.1 | ColumnspectrumControlDirection | read-only | current | Ingress or Egress direction |
| 1.3.6.1.4.1.21296.1.2.46.3.1.1.2 | ColumnspectrumControlCenterFrequency | read-only | current | Band slice center-frequency |
| 1.3.6.1.4.1.21296.1.2.46.3.1.1.3 | ColumnspectrumControlWidth | read-only | current | Detected width from spectrum-monitoring. 0 means unmatched. default value :0 |
| 1.3.6.1.4.1.21296.1.2.46.3.1.1.4 | ColumnspectrumControlAttenuationActual | read-only | current | Actual calculated attenuation. default value :0 |
| 1.3.6.1.4.1.21296.1.2.46.3.1.1.5 | ColumnspectrumControlAttenuationTarget | read-only | current | User configuration for the intended attenuation. |
| 1.3.6.1.4.1.21296.1.2.46.3.1.1.6 | ColumnspectrumControlTargetOutputPower | read-only | current | The intended target output power for the spectra. |
| 1.3.6.1.4.1.21296.1.2.46.4 | NodespectrumMonitoring | |||
| 1.3.6.1.4.1.21296.1.2.46.4.1 | TablespectrumMonitoringTable | not-accessible | current | DGE optical attenuation |
| 1.3.6.1.4.1.21296.1.2.46.4.1.1 | RowspectrumMonitoringEntry | not-accessible | current | Entry of spectrumMonitoringTable |
| 1.3.6.1.4.1.21296.1.2.46.4.1.1.1 | ColumnspectrumMonitoringDirection | read-only | current | Ingress or Egress direction |
| 1.3.6.1.4.1.21296.1.2.46.4.1.1.2 | ColumnspectrumMonitoringCenterFrequency | read-only | current | Band slice center-frequency |
| 1.3.6.1.4.1.21296.1.2.46.4.1.1.3 | ColumnspectrumMonitoringWidth | read-only | current | Received nmc width default value :50000 |
| 1.3.6.1.4.1.21296.1.2.46.4.1.1.4 | ColumnspectrumMonitoringLowerFrequency | read-only | current | Lower Frequency of a Media Channel. |
| 1.3.6.1.4.1.21296.1.2.46.4.1.1.5 | ColumnspectrumMonitoringUpperFrequency | read-only | current | Upper Frequency of a Media Channel. |
| 1.3.6.1.4.1.21296.1.2.46.4.1.1.6 | ColumnspectrumMonitoringTargetActualPower | read-only | current | Value: as calculated by Power Control if target-power-setting = auto. |
| 1.3.6.1.4.1.21296.1.2.46.4.1.1.7 | ColumnspectrumMonitoringPowerActual | read-only | current | Currently received power (-99: no power). default value :-99 |
| 1.3.6.1.4.1.21296.1.2.46.4.1.1.8 | ColumnspectrumMonitoringPsdActual | read-only | current | Currently calculated PSD. The Power Spectral Density does not depend on the spectra width. default value :not-applicable |
| 1.3.6.1.4.1.21296.1.2.46.5 | Nodeochm | |||
| 1.3.6.1.4.1.21296.1.2.46.5.1 | TableochmTable | not-accessible | current | ochm: Optical Channel non-intrusive monitoring. ECDP within OMS-nim. |
| 1.3.6.1.4.1.21296.1.2.46.5.1.1 | RowochmEntry | not-accessible | current | Entry of ochmTable |
| 1.3.6.1.4.1.21296.1.2.46.5.1.1.1 | ColumnochmName | read-only | current | A generic, configurable name for every facility. |
| 1.3.6.1.4.1.21296.1.2.46.5.1.1.2 | ColumnochmSupportingCard | read-only | current | Card that holds this facility |
| 1.3.6.1.4.1.21296.1.2.46.5.1.1.3 | ColumnochmSupportingPort | read-only | current | Ports that hold this facilityThis is originally a YANG leaf-list, here encoded as a comma separated list of values. |
| 1.3.6.1.4.1.21296.1.2.46.5.1.1.4 | ColumnochmSupportingFacilities | read-only | current | An XPath reference to the parent facilities.This is originally a YANG leaf-list, here encoded as a comma separated list of values. |
| 1.3.6.1.4.1.21296.1.2.46.5.1.1.5 | ColumnochmSupportedFacilities | read-only | current | An XPath reference to the children facilities.This is originally a YANG leaf-list, here encoded as a comma separated list of values. |
| 1.3.6.1.4.1.21296.1.2.46.5.1.1.6 | ColumnochmAID | read-only | current | Resource Access Identifier (AID). Identifies an instance within a specific resource type. |
| 1.3.6.1.4.1.21296.1.2.46.5.1.1.7 | ColumnochmLabel | read-only | current | The reply will be truncated in 128 bytes. User label. |
| 1.3.6.1.4.1.21296.1.2.46.5.1.1.8 | ColumnochmAdminState | read-only | current | The administrative state of the managed object. default value :unlock |
| 1.3.6.1.4.1.21296.1.2.46.5.1.1.9 | ColumnochmOperState | read-only | current | The operational state of this object. default value :disabled |
| 1.3.6.1.4.1.21296.1.2.46.5.1.1.10 | ColumnochmAvailState | read-only | current | Availability state of an entity. |
| 1.3.6.1.4.1.21296.1.2.46.5.1.1.11 | ColumnochmManagedBy | read-only | current | Describes whether this managed entity was system created or not. Only user created entities can be user deleted. default value :system |
| 1.3.6.1.4.1.21296.1.2.46.5.1.1.12 | ColumnochmAlarmReportControl | read-only | current | Controls the reporting of alarms for this particular object. default value :allowed |
| 1.3.6.1.4.1.21296.1.2.46.5.1.1.13 | ColumnochmDirection | read-only | current | Ingress or Egress direction |
| 1.3.6.1.4.1.21296.1.2.46.5.1.1.14 | ColumnochmPowerActual | read-only | current | Optical Power measurement upon last OCM scan. default value :-99 |
| 1.3.6.1.4.1.21296.1.2.46.5.1.1.15 | ColumnochmTargetActualPower | read-only | current | Actual Power Value: as calculated by Power Control. default value :-99 |
| 1.3.6.1.4.1.21296.1.2.46.5.1.1.16 | ColumnochmAttenuationActual | read-only | current | Actual attentuation. default value :not-applicable |
| 1.3.6.1.4.1.21296.1.2.46.6 | NodeomsMon | |||
| 1.3.6.1.4.1.21296.1.2.46.6.1 | TableomsMonTable | not-accessible | current | OMS Monitoring facility, with optical-ptp as supporting-facility. |
| 1.3.6.1.4.1.21296.1.2.46.6.1.1 | RowomsMonEntry | not-accessible | current | Entry of omsMonTable |
| 1.3.6.1.4.1.21296.1.2.46.6.1.1.1 | ColumnomsMonName | read-only | current | A generic, configurable name for every facility. |
| 1.3.6.1.4.1.21296.1.2.46.6.1.1.2 | ColumnomsMonSupportingCard | read-only | current | Card that holds this facility |
| 1.3.6.1.4.1.21296.1.2.46.6.1.1.3 | ColumnomsMonSupportingPort | read-only | current | Ports that hold this facilityThis is originally a YANG leaf-list, here encoded as a comma separated list of values. |
| 1.3.6.1.4.1.21296.1.2.46.6.1.1.4 | ColumnomsMonSupportingFacilities | read-only | current | An XPath reference to the parent facilities.This is originally a YANG leaf-list, here encoded as a comma separated list of values. |
| 1.3.6.1.4.1.21296.1.2.46.6.1.1.5 | ColumnomsMonSupportedFacilities | read-only | current | An XPath reference to the children facilities.This is originally a YANG leaf-list, here encoded as a comma separated list of values. |
| 1.3.6.1.4.1.21296.1.2.46.6.1.1.6 | ColumnomsMonAID | read-only | current | Resource Access Identifier (AID). Identifies an instance within a specific resource type. |
| 1.3.6.1.4.1.21296.1.2.46.6.1.1.7 | ColumnomsMonLabel | read-only | current | The reply will be truncated in 128 bytes. User label. |
| 1.3.6.1.4.1.21296.1.2.46.6.1.1.8 | ColumnomsMonAdminState | read-only | current | The administrative state of the managed object. default value :unlock |
| 1.3.6.1.4.1.21296.1.2.46.6.1.1.9 | ColumnomsMonOperState | read-only | current | The operational state of this object. default value :disabled |
| 1.3.6.1.4.1.21296.1.2.46.6.1.1.10 | ColumnomsMonAvailState | read-only | current | Availability state of an entity. |
| 1.3.6.1.4.1.21296.1.2.46.6.1.1.11 | ColumnomsMonManagedBy | read-only | current | Describes whether this managed entity was system created or not. Only user created entities can be user deleted. default value :system |
| 1.3.6.1.4.1.21296.1.2.46.6.1.1.12 | ColumnomsMonAlarmReportControl | read-only | current | Controls the reporting of alarms for this particular object. default value :allowed |
| 1.3.6.1.4.1.21296.1.2.46.6.1.1.13 | ColumnomsMonBand | read-only | current | System reports this attribute to indicate to which optical wavelength band this object relates to. default value :c-band |
| 1.3.6.1.4.1.21296.1.2.46.6.1.1.14 | ColumnomsMonMonitoringState | read-only | current | System reports this attribute, to indicate whether the oms-mon is of relevance. default value :disabled |
| 1.3.6.1.4.1.21296.1.2.46.6.1.1.15 | ColumnomsMonPowerActualRx | read-only | current | Optical Power Received, actual measurement. |
| 1.3.6.1.4.1.21296.1.2.47 | Nodemc | |||
| 1.3.6.1.4.1.21296.1.2.47.1 | NodemcInfo | |||
| 1.3.6.1.4.1.21296.1.2.47.1.1 | TablemcTable | not-accessible | current | MC: Media Channel. A media association that represents both the topology (i.e., the path throughthe media) and the resource (i.e., frequency slot or effective … |
| 1.3.6.1.4.1.21296.1.2.47.1.1.1 | RowmcEntry | not-accessible | current | Entry of mcTable |
| 1.3.6.1.4.1.21296.1.2.47.1.1.1.1 | ColumnmcName | read-only | current | A generic, configurable name for every facility. |
| 1.3.6.1.4.1.21296.1.2.47.1.1.1.2 | ColumnmcSupportingCard | read-only | current | Card that holds this facility |
| 1.3.6.1.4.1.21296.1.2.47.1.1.1.3 | ColumnmcSupportingPort | read-only | current | Ports that hold this facilityThis is originally a YANG leaf-list, here encoded as a comma separated list of values. |
| 1.3.6.1.4.1.21296.1.2.47.1.1.1.4 | ColumnmcSupportingFacilities | read-only | current | An XPath reference to the parent facilities.This is originally a YANG leaf-list, here encoded as a comma separated list of values. |
| 1.3.6.1.4.1.21296.1.2.47.1.1.1.5 | ColumnmcSupportedFacilities | read-only | current | An XPath reference to the children facilities.This is originally a YANG leaf-list, here encoded as a comma separated list of values. |
| 1.3.6.1.4.1.21296.1.2.47.1.1.1.6 | ColumnmcAID | read-only | current | Resource Access Identifier (AID). Identifies an instance within a specific resource type. |
| 1.3.6.1.4.1.21296.1.2.47.1.1.1.7 | ColumnmcLabel | read-only | current | The reply will be truncated in 128 bytes. User label. |
| 1.3.6.1.4.1.21296.1.2.47.1.1.1.8 | ColumnmcAdminState | read-only | current | The administrative state of the managed object. default value :unlock |
| 1.3.6.1.4.1.21296.1.2.47.1.1.1.9 | ColumnmcOperState | read-only | current | The operational state of this object. default value :disabled |
| 1.3.6.1.4.1.21296.1.2.47.1.1.1.10 | ColumnmcAvailState | read-only | current | Availability state of an entity. |
| 1.3.6.1.4.1.21296.1.2.47.1.1.1.11 | ColumnmcManagedBy | read-only | current | Describes whether this managed entity was system created or not. Only user created entities can be user deleted. default value :system |
| 1.3.6.1.4.1.21296.1.2.47.1.1.1.12 | ColumnmcAlarmReportControl | read-only | current | Controls the reporting of alarms for this particular object. default value :allowed |
| 1.3.6.1.4.1.21296.1.2.47.1.1.1.13 | ColumnmcParentOms | read-only | current | Parent Media Channel. Only set by creation. The referenced supporting-card must be part of a Degree (cannot be in an ADG). |
| 1.3.6.1.4.1.21296.1.2.47.1.1.1.14 | ColumnmcCenterFrequency | read-only | current | Center Frequency of the MC, determined by the SYSTEM. |
| 1.3.6.1.4.1.21296.1.2.47.1.1.1.15 | ColumnmcLowerFrequency | read-only | current | Lower Frequency of a Media Channel. |
| 1.3.6.1.4.1.21296.1.2.47.1.1.1.16 | ColumnmcUpperFrequency | read-only | current | Upper Frequency of a Media Channel. |
| 1.3.6.1.4.1.21296.1.2.47.1.1.1.17 | ColumnmcSlotWidth | read-only | current | Slot width, as calculated by the system, from upper-frequency - lower-frequency. |
| 1.3.6.1.4.1.21296.1.2.47.1.1.1.18 | ColumnmcAutoDelete | read-only | current | When enabled, the system may auto-delete this MC once it has no associated NMC; When disabled, the MC stays until explicitly deleted. default value :disabled |
| 1.3.6.1.4.1.21296.1.2.48 | Nodenmc | |||
| 1.3.6.1.4.1.21296.1.2.48.1 | NodenmcInfo | |||
| 1.3.6.1.4.1.21296.1.2.48.1.1 | TablenmcTable | not-accessible | current | NMC: Network Media Channel facility. A network media channel is a logical entity representing the optical signal carrying the service. The optical signal is al… |
| 1.3.6.1.4.1.21296.1.2.48.1.1.1 | RownmcEntry | not-accessible | current | Entry of nmcTable |
| 1.3.6.1.4.1.21296.1.2.48.1.1.1.1 | ColumnnmcName | read-only | current | A generic, configurable name for every facility. |
| 1.3.6.1.4.1.21296.1.2.48.1.1.1.2 | ColumnnmcSupportingCard | read-only | current | Card that holds this facility |
| 1.3.6.1.4.1.21296.1.2.48.1.1.1.3 | ColumnnmcSupportingPort | read-only | current | Ports that hold this facilityThis is originally a YANG leaf-list, here encoded as a comma separated list of values. |
| 1.3.6.1.4.1.21296.1.2.48.1.1.1.4 | ColumnnmcSupportingFacilities | read-only | current | An XPath reference to the parent facilities.This is originally a YANG leaf-list, here encoded as a comma separated list of values. |
| 1.3.6.1.4.1.21296.1.2.48.1.1.1.5 | ColumnnmcSupportedFacilities | read-only | current | An XPath reference to the children facilities.This is originally a YANG leaf-list, here encoded as a comma separated list of values. |
| 1.3.6.1.4.1.21296.1.2.48.1.1.1.6 | ColumnnmcAID | read-only | current | Resource Access Identifier (AID). Identifies an instance within a specific resource type. |
| 1.3.6.1.4.1.21296.1.2.48.1.1.1.7 | ColumnnmcLabel | read-only | current | The reply will be truncated in 128 bytes. User label. |
| 1.3.6.1.4.1.21296.1.2.48.1.1.1.8 | ColumnnmcAdminState | read-only | current | The administrative state of the managed object. default value :unlock |
| 1.3.6.1.4.1.21296.1.2.48.1.1.1.9 | ColumnnmcOperState | read-only | current | The operational state of this object. default value :disabled |
| 1.3.6.1.4.1.21296.1.2.48.1.1.1.10 | ColumnnmcAvailState | read-only | current | Availability state of an entity. |
| 1.3.6.1.4.1.21296.1.2.48.1.1.1.11 | ColumnnmcManagedBy | read-only | current | Describes whether this managed entity was system created or not. Only user created entities can be user deleted. default value :system |
| 1.3.6.1.4.1.21296.1.2.48.1.1.1.12 | ColumnnmcAlarmReportControl | read-only | current | Controls the reporting of alarms for this particular object. default value :allowed |
| 1.3.6.1.4.1.21296.1.2.48.1.1.1.13 | ColumnnmcParentFacility | read-only | current | Parent facility: can be either a Media Channel or an OMS. Only set on creation. |
| 1.3.6.1.4.1.21296.1.2.48.1.1.1.14 | ColumnnmcMonitoringState | read-only | current | System reports this attribute, to indicate whether the NMC is intended to be in use (instead of simply being pre-provisioned); enabled if NMC is a member of an… |
| 1.3.6.1.4.1.21296.1.2.48.1.1.1.15 | ColumnnmcCenterFrequency | read-only | current | Nominal Center Frequency of the NMC |
| 1.3.6.1.4.1.21296.1.2.48.1.1.1.16 | ColumnnmcWidth | read-only | current | Network Media Channel frequency width; unit is MHz. The value in GHz should be equivalent to the baud rate (GBd) configured on the connected transponder line i… |
| 1.3.6.1.4.1.21296.1.2.48.1.1.1.17 | ColumnnmcInputPowerMin | read-only | current | Minimum Input Power. |
| 1.3.6.1.4.1.21296.1.2.48.1.1.1.18 | ColumnnmcInputPowerMax | read-only | current | Maximum Input Power. |
| 1.3.6.1.4.1.21296.1.2.48.1.1.1.19 | ColumnnmcInputPowerTypical | read-only | current | Typical Input Power. |
| 1.3.6.1.4.1.21296.1.2.48.1.1.1.20 | ColumnnmcInputPowerMinOffset | read-only | current | Minimum Input Power offset, of relevance for NMCs within MCs. UNITS:dB default value :0 |
| 1.3.6.1.4.1.21296.1.2.48.1.1.1.21 | ColumnnmcInputPsdMin | read-only | current | Calculated by the SYSTEM from input-power-min. |
| 1.3.6.1.4.1.21296.1.2.48.1.1.1.22 | ColumnnmcInputPsdMax | read-only | current | Calculated by the SYSTEM from input-power-max. |
| 1.3.6.1.4.1.21296.1.2.48.1.1.1.23 | ColumnnmcInputPsdTypical | read-only | current | Calculated by the SYSTEM from input-power-typ. |
| 1.3.6.1.4.1.21296.1.2.48.1.1.1.24 | ColumnnmcInputAttenuationActual | read-only | current | Actual input attentuation. |
| 1.3.6.1.4.1.21296.1.2.48.1.1.1.25 | ColumnnmcInputAttenuationTarget | read-only | current | Configurable target input attentuation. |
| 1.3.6.1.4.1.21296.1.2.48.1.1.1.26 | ColumnnmcOutputAttenuationActual | read-only | current | Actual output attentuation. |
| 1.3.6.1.4.1.21296.1.2.48.1.1.1.27 | ColumnnmcOutputAttenuationTarget | read-only | current | Configurable target output attentuation. |
| 1.3.6.1.4.1.21296.1.2.48.1.1.1.28 | ColumnnmcPowerActualRx | read-only | current | Optical Power Received, actual measurement. |
| 1.3.6.1.4.1.21296.1.2.48.1.1.1.29 | ColumnnmcPowerActualTx | read-only | current | Optical Power Transmitted, actual measurement. |
| 1.3.6.1.4.1.21296.1.2.48.1.1.1.30 | ColumnnmcPsdActualRx | read-only | current | Calculated by the SYSTEM from power-actual-rx (i.e. dependent on spectrum width). |
| 1.3.6.1.4.1.21296.1.2.48.1.1.1.31 | ColumnnmcPsdActualTx | read-only | current | Calculated by the SYSTEM from power-actual-tx (i.e. dependent on spectrum width). |
| 1.3.6.1.4.1.21296.1.2.48.1.1.1.32 | ColumnnmcOchConnection | read-only | current | NMC redux - optical channel connection. default value :false |
| 1.3.6.1.4.1.21296.1.2.48.1.1.1.33 | ColumnnmcOutputAttenuationOffset | read-only | current | Configurable target output attenuation offset. default value :0 |
| 1.3.6.1.4.1.21296.1.2.48.1.1.1.34 | ColumnnmcInputAttenuationOffset | read-only | current | Configurable target input attenuation offset. default value :0 |
| 1.3.6.1.4.1.21296.1.2.48.1.1.1.35 | ColumnnmcAsePowerActualTx | read-only | current | ASE power of the protection ASE. |
| 1.3.6.1.4.1.21296.1.2.48.1.1.1.36 | ColumnnmcAseActivationState | read-only | current | Activation state of the protection ASE. |
| 1.3.6.1.4.1.21296.1.2.48.1.1.1.37 | ColumnnmcAseInsertionEnable | read-only | current | Indicates if the ASE Idler insertion on NMC failure is enabled. default value :disabled |
| 1.3.6.1.4.1.21296.1.2.48.1.1.1.38 | ColumnnmcAseInsertionSoakTimer | read-only | current | The duration for which NMC failure should be soaked before proceeding with ASE Idler injection if ASE insertion is enabled. UNITS:seconds default value :5 |
| 1.3.6.1.4.1.21296.1.2.48.1.1.1.39 | ColumnnmcAseInsertionControl | read-only | current | Indicates the criteria for ASE Insertion. This is applicable only when ASE insertion is enabled. default value :adg-input-delta |
| 1.3.6.1.4.1.21296.1.2.48.1.1.1.40 | ColumnnmcAseInsertionDelta | read-only | current | This is the amount by which the signal power must drop below the reference power for the NMC to initiate a replacement of the NMC with ASE (NMC-P). UNITS:dB de… |
| 1.3.6.1.4.1.21296.1.2.48.1.1.1.41 | ColumnnmcLoopbackState | read-only | current | NULL default value :unknown |
| 1.3.6.1.4.1.21296.1.2.48.1.1.1.42 | ColumnnmcTargetPowerAse | read-only | current | Target output power of parent NMC. |
| 1.3.6.1.4.1.21296.1.2.48.1.1.1.43 | ColumnnmcAttenuationActualAse | read-only | current | Output attenuation of parent NMC. |
| 1.3.6.1.4.1.21296.1.2.48.1.1.1.44 | ColumnnmcAcrdReference | read-only | current | Automatic Channel Recovery Detection reference trace acquisition. default value :manual-acquisition-mode |
| 1.3.6.1.4.1.21296.1.2.48.1.1.1.48 | ColumnnmcOutputAttenuationCompensationActual | read-only | current | Network Media Channel attenuation adjustment applied by auto-controls to do power targeting in mux direction. |
| 1.3.6.1.4.1.21296.1.2.48.1.1.1.49 | ColumnnmcAseAttenuationCompensationActual | read-only | current | Network Media Channel attenuation adjustment applied by auto-controls to NMC-P level to do power targeting. |
| 1.3.6.1.4.1.21296.1.2.48.1.1.1.50 | ColumnnmcInputAttenuationCompensationActual | read-only | current | Network Media Channel attenuation adjustment applied by auto-controls to do power targeting in demux direction. |
| 1.3.6.1.4.1.21296.1.2.48.1.1.1.51 | ColumnnmcAutoDelete | read-only | current | When enabled, the system may auto-delete this NMC once it has no associated OXCON. When disabled, the NMC stays until explicitly deleted. default value :disabl… |
| 1.3.6.1.4.1.21296.1.2.49 | Nodersc | |||
| 1.3.6.1.4.1.21296.1.2.49.1 | NoderscInfo | |||
| 1.3.6.1.4.1.21296.1.2.49.1.1 | TablerscTable | not-accessible | current | Raman Supervisory Channel: Raman card Pilot Tone facility. |
| 1.3.6.1.4.1.21296.1.2.49.1.1.1 | RowrscEntry | not-accessible | current | Entry of rscTable |
| 1.3.6.1.4.1.21296.1.2.49.1.1.1.1 | ColumnrscName | read-only | current | A generic, configurable name for every facility. |
| 1.3.6.1.4.1.21296.1.2.49.1.1.1.2 | ColumnrscSupportingCard | read-only | current | Card that holds this facility |
| 1.3.6.1.4.1.21296.1.2.49.1.1.1.3 | ColumnrscSupportingPort | read-only | current | Ports that hold this facilityThis is originally a YANG leaf-list, here encoded as a comma separated list of values. |
| 1.3.6.1.4.1.21296.1.2.49.1.1.1.4 | ColumnrscSupportingFacilities | read-only | current | An XPath reference to the parent facilities.This is originally a YANG leaf-list, here encoded as a comma separated list of values. |
| 1.3.6.1.4.1.21296.1.2.49.1.1.1.5 | ColumnrscSupportedFacilities | read-only | current | An XPath reference to the children facilities.This is originally a YANG leaf-list, here encoded as a comma separated list of values. |
| 1.3.6.1.4.1.21296.1.2.49.1.1.1.6 | ColumnrscAID | read-only | current | Resource Access Identifier (AID). Identifies an instance within a specific resource type. |
| 1.3.6.1.4.1.21296.1.2.49.1.1.1.7 | ColumnrscLabel | read-only | current | The reply will be truncated in 128 bytes. User label. |
| 1.3.6.1.4.1.21296.1.2.49.1.1.1.8 | ColumnrscAdminState | read-only | current | The administrative state of the managed object. default value :unlock |
| 1.3.6.1.4.1.21296.1.2.49.1.1.1.9 | ColumnrscOperState | read-only | current | The operational state of this object. default value :disabled |
| 1.3.6.1.4.1.21296.1.2.49.1.1.1.10 | ColumnrscAvailState | read-only | current | Availability state of an entity. |
| 1.3.6.1.4.1.21296.1.2.49.1.1.1.11 | ColumnrscManagedBy | read-only | current | Describes whether this managed entity was system created or not. Only user created entities can be user deleted. default value :system |
| 1.3.6.1.4.1.21296.1.2.49.1.1.1.12 | ColumnrscAlarmReportControl | read-only | current | Controls the reporting of alarms for this particular object. default value :allowed |
| 1.3.6.1.4.1.21296.1.2.49.1.1.1.13 | ColumnrscPowerRx | read-only | current | The received Pilot Tone integrated power. default value :-99 |
| 1.3.6.1.4.1.21296.1.2.49.1.1.1.14 | ColumnrscPowerTx | read-only | current | The transmitted Pilot Tone integrated power. default value :-99 |
| 1.3.6.1.4.1.21296.1.2.49.2 | Nodepump | |||
| 1.3.6.1.4.1.21296.1.2.49.2.1 | TablepumpTable | not-accessible | current | Raman Pump individual monitoring. |
| 1.3.6.1.4.1.21296.1.2.49.2.1.1 | RowpumpEntry | not-accessible | current | Entry of pumpTable |
| 1.3.6.1.4.1.21296.1.2.49.2.1.1.1 | ColumnpumpName | read-only | current | A generic, configurable name for every facility. |
| 1.3.6.1.4.1.21296.1.2.49.2.1.1.2 | ColumnpumpSupportingCard | read-only | current | Card that holds this facility |
| 1.3.6.1.4.1.21296.1.2.49.2.1.1.3 | ColumnpumpSupportingPort | read-only | current | Ports that hold this facilityThis is originally a YANG leaf-list, here encoded as a comma separated list of values. |
| 1.3.6.1.4.1.21296.1.2.49.2.1.1.4 | ColumnpumpSupportingFacilities | read-only | current | An XPath reference to the parent facilities.This is originally a YANG leaf-list, here encoded as a comma separated list of values. |
| 1.3.6.1.4.1.21296.1.2.49.2.1.1.5 | ColumnpumpSupportedFacilities | read-only | current | An XPath reference to the children facilities.This is originally a YANG leaf-list, here encoded as a comma separated list of values. |
| 1.3.6.1.4.1.21296.1.2.49.2.1.1.6 | ColumnpumpAID | read-only | current | Resource Access Identifier (AID). Identifies an instance within a specific resource type. |
| 1.3.6.1.4.1.21296.1.2.49.2.1.1.7 | ColumnpumpLabel | read-only | current | The reply will be truncated in 128 bytes. User label. |
| 1.3.6.1.4.1.21296.1.2.49.2.1.1.8 | ColumnpumpAdminState | read-only | current | The administrative state of the managed object. default value :unlock |
| 1.3.6.1.4.1.21296.1.2.49.2.1.1.9 | ColumnpumpOperState | read-only | current | The operational state of this object. default value :disabled |
| 1.3.6.1.4.1.21296.1.2.49.2.1.1.10 | ColumnpumpAvailState | read-only | current | Availability state of an entity. |
| 1.3.6.1.4.1.21296.1.2.49.2.1.1.11 | ColumnpumpManagedBy | read-only | current | Describes whether this managed entity was system created or not. Only user created entities can be user deleted. default value :system |
| 1.3.6.1.4.1.21296.1.2.49.2.1.1.12 | ColumnpumpAlarmReportControl | read-only | current | Controls the reporting of alarms for this particular object. default value :allowed |
| 1.3.6.1.4.1.21296.1.2.49.2.1.1.13 | ColumnpumpType | read-only | current | Type of Pump. |
| 1.3.6.1.4.1.21296.1.2.50 | NodeopticalPtp | |||
| 1.3.6.1.4.1.21296.1.2.50.1 | NodeopticalPtpInfo | |||
| 1.3.6.1.4.1.21296.1.2.50.1.1 | TableopticalPtpTable | not-accessible | current | List of Optical PTP facilities. |
| 1.3.6.1.4.1.21296.1.2.50.1.1.1 | RowopticalPtpEntry | not-accessible | current | Entry of opticalPtpTable |
| 1.3.6.1.4.1.21296.1.2.50.1.1.1.1 | ColumnopticalPtpName | read-only | current | A generic, configurable name for every facility. |
| 1.3.6.1.4.1.21296.1.2.50.1.1.1.2 | ColumnopticalPtpSupportingCard | read-only | current | Card that holds this facility |
| 1.3.6.1.4.1.21296.1.2.50.1.1.1.3 | ColumnopticalPtpSupportingPort | read-only | current | Ports that hold this facilityThis is originally a YANG leaf-list, here encoded as a comma separated list of values. |
| 1.3.6.1.4.1.21296.1.2.50.1.1.1.4 | ColumnopticalPtpSupportingFacilities | read-only | current | An XPath reference to the parent facilities.This is originally a YANG leaf-list, here encoded as a comma separated list of values. |
| 1.3.6.1.4.1.21296.1.2.50.1.1.1.5 | ColumnopticalPtpSupportedFacilities | read-only | current | An XPath reference to the children facilities.This is originally a YANG leaf-list, here encoded as a comma separated list of values. |
| 1.3.6.1.4.1.21296.1.2.50.1.1.1.6 | ColumnopticalPtpAID | read-only | current | Resource Access Identifier (AID). Identifies an instance within a specific resource type. |
| 1.3.6.1.4.1.21296.1.2.50.1.1.1.7 | ColumnopticalPtpLabel | read-only | current | The reply will be truncated in 128 bytes. User label. |
| 1.3.6.1.4.1.21296.1.2.50.1.1.1.8 | ColumnopticalPtpAdminState | read-only | current | The administrative state of the managed object. default value :unlock |
| 1.3.6.1.4.1.21296.1.2.50.1.1.1.9 | ColumnopticalPtpOperState | read-only | current | The operational state of this object. default value :disabled |
| 1.3.6.1.4.1.21296.1.2.50.1.1.1.10 | ColumnopticalPtpAvailState | read-only | current | Availability state of an entity. |
| 1.3.6.1.4.1.21296.1.2.50.1.1.1.11 | ColumnopticalPtpManagedBy | read-only | current | Describes whether this managed entity was system created or not. Only user created entities can be user deleted. default value :system |
| 1.3.6.1.4.1.21296.1.2.50.1.1.1.12 | ColumnopticalPtpAlarmReportControl | read-only | current | Controls the reporting of alarms for this particular object. default value :allowed |
| 1.3.6.1.4.1.21296.1.2.50.1.1.1.13 | ColumnopticalPtpPtpType | read-only | current | Type of Optical PTP. |
| 1.3.6.1.4.1.21296.1.2.50.1.1.1.14 | ColumnopticalPtpPortDirectionConvention | read-only | current | IOA port (PTP) direction convention. |
| 1.3.6.1.4.1.21296.1.2.50.1.1.1.15 | ColumnopticalPtpLaserState | read-only | current | The emitting pump (e.g. booster) laser state. RD amplifiers: source (Tx) pump disabled. RPB: Pump Laser, and actual traffic emitted from dwdm-line port: sink o… |
| 1.3.6.1.4.1.21296.1.2.50.1.1.1.16 | ColumnopticalPtpPowerActualRx | read-only | current | Optical power received, where applicable. |
| 1.3.6.1.4.1.21296.1.2.50.1.1.1.17 | ColumnopticalPtpPowerActualTx | read-only | current | Optical power transmitted, where applicable. |
| 1.3.6.1.4.1.21296.1.2.50.1.1.1.18 | ColumnopticalPtpFixRxAttenuation | read-only | current | Fixed Attenuator before port Rx. 0 (dB) is equivalent to no fixed attenuator. |
| 1.3.6.1.4.1.21296.1.2.50.1.1.1.19 | ColumnopticalPtpMonitoringState | read-only | current | System reports this attribute to indicate whether the optical-ptp is intended to be in use (instead of simply being pre-provisioned); when optical-ptp is creat… |
| 1.3.6.1.4.1.21296.1.2.50.1.1.1.20 | ColumnopticalPtpActualPowerSupport | read-only | current | Port power monitoring support. default value :not-applicable |
| 1.3.6.1.4.1.21296.1.2.50.1.1.1.21 | ColumnopticalPtpBandRequired | read-only | current | Required Transmission Band(s) for the DWDM-line port. |
| 1.3.6.1.4.1.21296.1.2.50.1.1.1.22 | ColumnopticalPtpBandsSupported | read-only | current | List of bands supported by a card's port.This is originally a YANG leaf-list, here encoded as a comma separated list of values. Conditions:../ptp-type = 'dwdm-… |
| 1.3.6.1.4.1.21296.1.2.50.1.1.1.24 | ColumnopticalPtpAseSourceConnected | read-only | current | Whether PTP is connected from an ASE Idler (connection from 'Out') or not. default value :false |
| 1.3.6.1.4.1.21296.1.2.50.1.1.1.25 | ColumnopticalPtpTargetPowerSetting | read-only | current | How the target power of the drop oxcon is determined, at RD drop side. default value :auto-max |
| 1.3.6.1.4.1.21296.1.2.50.1.1.1.26 | ColumnopticalPtpFiberLengthOffset | read-only | current | Fiber patch cord length between the Raman DWDM port and the base card DWDM line port. default value :not-applicable |
| 1.3.6.1.4.1.21296.1.2.50.1.1.1.27 | ColumnopticalPtpFixTxAttenuation | read-only | current | Fixed Attenuator after port Tx. 0 (dB) is equivalent to no fixed attenuator. |
| 1.3.6.1.4.1.21296.1.2.51 | Nodefc | |||
| 1.3.6.1.4.1.21296.1.2.51.1 | NodefcInfo | |||
| 1.3.6.1.4.1.21296.1.2.51.1.1 | TablefcTable | not-accessible | current | FC facility. |
| 1.3.6.1.4.1.21296.1.2.51.1.1.1 | RowfcEntry | not-accessible | current | Entry of fcTable |
| 1.3.6.1.4.1.21296.1.2.51.1.1.1.1 | ColumnfcName | read-only | current | A generic, configurable name for every facility. |
| 1.3.6.1.4.1.21296.1.2.51.1.1.1.2 | ColumnfcSupportingCard | read-only | current | Card that holds this facility |
| 1.3.6.1.4.1.21296.1.2.51.1.1.1.3 | ColumnfcSupportingPort | read-only | current | Ports that hold this facilityThis is originally a YANG leaf-list, here encoded as a comma separated list of values. |
| 1.3.6.1.4.1.21296.1.2.51.1.1.1.4 | ColumnfcSupportingFacilities | read-only | current | An XPath reference to the parent facilities.This is originally a YANG leaf-list, here encoded as a comma separated list of values. |
| 1.3.6.1.4.1.21296.1.2.51.1.1.1.5 | ColumnfcSupportedFacilities | read-only | current | An XPath reference to the children facilities.This is originally a YANG leaf-list, here encoded as a comma separated list of values. |
| 1.3.6.1.4.1.21296.1.2.51.1.1.1.6 | ColumnfcAID | read-only | current | Resource Access Identifier (AID). Identifies an instance within a specific resource type. |
| 1.3.6.1.4.1.21296.1.2.51.1.1.1.7 | ColumnfcLabel | read-only | current | The reply will be truncated in 128 bytes. User label. |
| 1.3.6.1.4.1.21296.1.2.51.1.1.1.8 | ColumnfcAdminState | read-only | current | The administrative state of the managed object. default value :unlock |
| 1.3.6.1.4.1.21296.1.2.51.1.1.1.9 | ColumnfcOperState | read-only | current | The operational state of this object. default value :disabled |
| 1.3.6.1.4.1.21296.1.2.51.1.1.1.10 | ColumnfcAvailState | read-only | current | Availability state of an entity. |
| 1.3.6.1.4.1.21296.1.2.51.1.1.1.11 | ColumnfcManagedBy | read-only | current | Describes whether this managed entity was system created or not. Only user created entities can be user deleted. default value :system |
| 1.3.6.1.4.1.21296.1.2.51.1.1.1.12 | ColumnfcAlarmReportControl | read-only | current | Controls the reporting of alarms for this particular object. default value :allowed |
| 1.3.6.1.4.1.21296.1.2.51.1.1.1.13 | ColumnfcType | read-only | current | The type of fc signal. |
| 1.3.6.1.4.1.21296.1.2.51.1.1.1.14 | ColumnfcServiceMode | read-only | current | Service mode for the fc facility. default value :transport |
| 1.3.6.1.4.1.21296.1.2.51.1.1.1.15 | ColumnfcServiceModeQualifier | read-only | current | Service mode qualifier for the fc facility. default value :none |
| 1.3.6.1.4.1.21296.1.2.51.1.1.1.16 | ColumnfcSpeed | read-only | current | The speed/rate of the fc client interfaces. UNITS:Gbit/s |
| 1.3.6.1.4.1.21296.1.2.51.1.1.1.17 | ColumnfcTxMappingMode | read-only | current | The tx mapping mode of client port. The possible values are dependent on the HW and configuration. |
| 1.3.6.1.4.1.21296.1.2.51.1.1.1.18 | ColumnfcExpectedMappingMode | read-only | current | The expected mapping mode of client port. The possible values are dependent on the HW and configuration. |
| 1.3.6.1.4.1.21296.1.2.51.1.1.1.19 | ColumnfcLoopback | read-only | current | Loopback mode.Useful to debug on the fiber connection. default value :none |
| 1.3.6.1.4.1.21296.1.2.51.1.1.1.20 | ColumnfcLoopbackMode | read-only | current | Indicates loopback action for facility or terminal. default value :loopback |
| 1.3.6.1.4.1.21296.1.2.51.1.1.1.21 | ColumnfcTestSignalType | read-only | current | The type of test pattern that is injected. default value :none |
| 1.3.6.1.4.1.21296.1.2.51.1.1.1.22 | ColumnfcTestSignalDirection | read-only | current | The direction of the test signal. default value :ingress |
| 1.3.6.1.4.1.21296.1.2.51.1.1.1.23 | ColumnfcTestSignalMonitoring | read-only | current | Monitor the incoming test signals for diagnostics. default value :false |
| 1.3.6.1.4.1.21296.1.2.51.1.1.1.24 | ColumnfcCircuitId | read-only | current | System configured circuit ID, present in XCONs and associated facilities. For facilities, circuit-id is only filled in if an associated XCON exists. Format of … |
| 1.3.6.1.4.1.21296.1.2.51.1.1.1.25 | ColumnfcTts | read-only | current | Enable/Disable the Transmitter Training Signal (TTS) support for 32GFC client. default value :enabled |
| 1.3.6.1.4.1.21296.1.2.51.1.1.1.26 | ColumnfcLaserTogglingForTts | read-only | current | Enable/Disable the laser-toggling-for-tts when tts is enabled/disabled for 32GFC client. default value :disabled |
| 1.3.6.1.4.1.21296.1.2.53 | Nodeamp | |||
| 1.3.6.1.4.1.21296.1.2.53.1 | Nodeamplifier | |||
| 1.3.6.1.4.1.21296.1.2.53.1.1 | TableamplifierTable | not-accessible | current | Amplifier container. |
| 1.3.6.1.4.1.21296.1.2.53.1.1.1 | RowamplifierEntry | not-accessible | current | Entry of amplifierTable |
| 1.3.6.1.4.1.21296.1.2.53.1.1.1.1 | ColumnamplifierName | read-only | current | Non-configurable name: derived from chass/slot and degree. |
| 1.3.6.1.4.1.21296.1.2.53.1.1.1.2 | ColumnamplifierSupportingCard | read-only | current | Card that holds this |
| 1.3.6.1.4.1.21296.1.2.53.1.1.1.3 | ColumnamplifierSupportingInputPort | read-only | current | Rx (input) Port that hold this objectThis is originally a YANG leaf-list, here encoded as a comma separated list of values. |
| 1.3.6.1.4.1.21296.1.2.53.1.1.1.4 | ColumnamplifierSupportingOutputPort | read-only | current | Tx (output) Port that hold this objectThis is originally a YANG leaf-list, here encoded as a comma separated list of values. |
| 1.3.6.1.4.1.21296.1.2.53.1.1.1.5 | ColumnamplifierAID | read-only | current | Resource Access Identifier (AID). Identifies an instance within a specific resource type. |
| 1.3.6.1.4.1.21296.1.2.53.1.1.1.6 | ColumnamplifierAdminState | read-only | current | The administrative state of the managed object. default value :unlock |
| 1.3.6.1.4.1.21296.1.2.53.1.1.1.7 | ColumnamplifierOperState | read-only | current | The operational state of this object. default value :disabled |
| 1.3.6.1.4.1.21296.1.2.53.1.1.1.8 | ColumnamplifierAvailState | read-only | current | Availability state of an entity. |
| 1.3.6.1.4.1.21296.1.2.53.1.1.1.9 | ColumnamplifierLabel | read-only | current | The reply will be truncated in 128 bytes. User label. |
| 1.3.6.1.4.1.21296.1.2.53.1.1.1.10 | ColumnamplifierFunction | read-only | current | Which NE function the ne-function object works as. |
| 1.3.6.1.4.1.21296.1.2.53.1.1.1.11 | ColumnamplifierAlarmReportControl | read-only | current | Controls the reporting of alarms for this particular object. default value :allowed |
| 1.3.6.1.4.1.21296.1.2.53.1.1.1.12 | ColumnamplifierEnable | read-only | current | The enable switch of amplifier(s) In cards with dual-band, this attribute is relevant at the C-band related amplifier. |
| 1.3.6.1.4.1.21296.1.2.53.1.1.1.13 | ColumnamplifierControlMode | read-only | current | Type of control-mode. default value :auto-max-pw |
| 1.3.6.1.4.1.21296.1.2.53.1.1.1.14 | ColumnamplifierMode | read-only | current | The amplifier operating mode of the amplifier (gain or power control). default value :constant-gain |
| 1.3.6.1.4.1.21296.1.2.53.1.1.1.15 | ColumnamplifierPumpState | read-only | current | The state of the pump. default value :disabled |
| 1.3.6.1.4.1.21296.1.2.53.1.1.1.16 | ColumnamplifierGainRangeControl | read-only | current | Automatic or Manual Gain Range configuration. default value :auto |
| 1.3.6.1.4.1.21296.1.2.53.1.1.1.17 | ColumnamplifierSpanLossControl | read-only | current | Span Loss Control configuration. Only of relevance for inline amplifier(s) and preamp(s). default value :enabled |
| 1.3.6.1.4.1.21296.1.2.53.1.1.1.18 | ColumnamplifierGainRangeTarget | read-only | current | Gain Range Target Conditions:../gain-range-control = 'manual' default value :standard |
| 1.3.6.1.4.1.21296.1.2.53.1.1.1.19 | ColumnamplifierGainRangeActual | read-only | current | Actual Gain Range |
| 1.3.6.1.4.1.21296.1.2.53.1.1.1.20 | ColumnamplifierGainTarget | read-only | current | For manual control mode: setting gain to the amplifier for constant-gain mode. default value :0.0 |
| 1.3.6.1.4.1.21296.1.2.53.1.1.1.21 | ColumnamplifierGainOperating | read-only | current | Operating gain of the amplifier that is the actually configured gain on the amplifier. When card is plugged out, or EDFA disabled, gain-operating is 0.0. defau… |
| 1.3.6.1.4.1.21296.1.2.53.1.1.1.22 | ColumnamplifierOptimumEdfaGain | read-only | current | System reports the optimum EDFA gain the required equipped EDFA has. By convention system reports 0 dB when card is not required equipped. UNITS:dB default val… |
| 1.3.6.1.4.1.21296.1.2.53.1.1.1.23 | ColumnamplifierGainAdjustment | read-only | current | Gain range adjustment: For auto control mode: gain offset defined by the user. The value is used for adjustment of gain when the amplifier is in automatic cont… |
| 1.3.6.1.4.1.21296.1.2.53.1.1.1.24 | ColumnamplifierType | read-only | current | Type of the amplifier HW. |
| 1.3.6.1.4.1.21296.1.2.53.1.1.1.25 | ColumnamplifierOutputPowerMon | read-only | current | Monitored aggregate signal output power. |
| 1.3.6.1.4.1.21296.1.2.53.1.1.1.26 | ColumnamplifierOutputPowerMonWithAse | read-only | current | Monitored aggregate total output power including both signal and ASE. |
| 1.3.6.1.4.1.21296.1.2.53.1.1.1.27 | ColumnamplifierInputPowerMon | read-only | current | Monitored aggregate input power. |
| 1.3.6.1.4.1.21296.1.2.53.1.1.1.28 | ColumnamplifierOutputVoaAttenuation | read-only | current | For control-mode = 'manual': target VOA attenuation at output of the amplifier (line padding VOA). default value :0 |
| 1.3.6.1.4.1.21296.1.2.53.1.1.1.29 | ColumnamplifierOutputVoaActual | read-only | current | Actual VOA output. default value :not-applicable |
| 1.3.6.1.4.1.21296.1.2.53.1.1.1.30 | ColumnamplifierPowerBeforeOutputVoa | read-only | current | Measured optical power before output VOA. |
| 1.3.6.1.4.1.21296.1.2.53.1.1.1.31 | ColumnamplifierInterstageLoss | read-only | current | Amplifier interstage loss. Only of relevance when amplifier has an interstage port. UNITS:dB default value :0 |
| 1.3.6.1.4.1.21296.1.2.53.1.1.1.32 | ColumnamplifierTiltControlMode | read-only | current | Specify the tilt control mode. Defines whether amplifier tilt is automatically set by system or configured manually by the user default value :auto |
| 1.3.6.1.4.1.21296.1.2.53.1.1.1.33 | ColumnamplifierTiltTarget | read-only | current | For manual control mode: target tilt, to be configured on the amplifier. Conditions:../tilt-control-mode = 'manual' UNITS:dB default value :0 |
| 1.3.6.1.4.1.21296.1.2.53.1.1.1.34 | ColumnamplifierTiltAdjustment | read-only | current | Used to offset the target tilt when tilt-control-mode = 'auto' / 'auto-planned' Conditions:../tilt-control-mode != 'manual' UNITS:dB default value :0 |
| 1.3.6.1.4.1.21296.1.2.53.1.1.1.35 | ColumnamplifierTiltActual | read-only | current | Actual setting of tilt on the amplifier. Spectrum Tilt (measured by the EDFA): 0 means both no tilt, or amplifier not available. UNITS:dB default value :0 |
| 1.3.6.1.4.1.21296.1.2.53.1.1.1.36 | ColumnamplifierRamanSignalGain | read-only | current | Raman Gain of C-Band (signal) - if there is a fiber-connection from/to Raman, the API raman-signal-gain at amplifier needs to be appropriately configured auton… |
| 1.3.6.1.4.1.21296.1.2.53.1.1.1.37 | ColumnamplifierRamanOscGain | read-only | current | Raman Gain OSC (see raman-signal-gain). |
| 1.3.6.1.4.1.21296.1.2.53.1.1.1.38 | ColumnamplifierPartnerAmplifier | read-only | current | The partner amplifier for PAx/ BAX instalments. At cards with dual-band, by convention, this is always not-applicable. default value :not-applicable |
| 1.3.6.1.4.1.21296.1.2.53.1.1.1.39 | ColumnamplifierAmpControlSupport | read-only | current | Whether 'control-mode' can be configured as 'auto-max-pw' or not. default value :auto |
| 1.3.6.1.4.1.21296.1.2.53.1.1.1.40 | ColumnamplifierActualTransmissionBand | read-only | current | Currently assigned transmission band. If amplifier is not at a degree, it will be 4.85 THz by convention. default value :c-band-4.85THz |
| 1.3.6.1.4.1.21296.1.2.53.1.1.1.41 | ColumnamplifierInterstageSupport | read-only | current | 'true' if interstage port is supported in this amplifier. default value :false |
| 1.3.6.1.4.1.21296.1.2.53.1.1.1.42 | ColumnamplifierVoaControlMode | read-only | current | Type of voa-control-mode. default value :constant-power |
| 1.3.6.1.4.1.21296.1.2.53.1.1.1.43 | ColumnamplifierOlosShutdownSoakTimer | read-only | current | On input OLOS, system will soak for the specified time (in msecs) and if the fault still persists, it will go on to do the consequent action (shutdown). UNITS:… |
| 1.3.6.1.4.1.21296.1.2.53.1.1.1.44 | ColumnamplifierOlosShutdownDisable | read-only | current | If it is set to be true, on input OLOS, it will not do the consequent action (shutdown). default value :false |
| 1.3.6.1.4.1.21296.1.2.53.1.1.1.45 | ColumnamplifierForcedShutdown | read-only | current | For cards with dual-band, one amplifier be forced to be shutdown by setting this attribute to 'yes'. default value :false |
| 1.3.6.1.4.1.21296.1.2.53.1.1.1.46 | ColumnamplifierTurnOnDelay | read-only | current | Allows the user to configure the timer value for the pre-amplifier of RD cards. UNITS:minutes default value :0 |
| 1.3.6.1.4.1.21296.1.2.53.1.1.1.47 | ColumnamplifierTurnOnRemain | read-only | current | Display the remaining time of the amplifier-turn-on-delay timer. UNITS:minutes default value :0 |
| 1.3.6.1.4.1.21296.1.2.53.1.1.1.48 | ColumnamplifierControlState | read-only | current | Indicates the current state of the power control adjustment for the preamplifier. |
| 1.3.6.1.4.1.21296.1.2.53.1.1.1.49 | ColumnamplifierControlSpeedFactor | read-only | current | Control speed factor for the DGE power control algorithm. Value is conveyed to PCL on the EDFA object. default value :1.00 |
| 1.3.6.1.4.1.21296.1.2.53.2 | NodesupportedGainRange | |||
| 1.3.6.1.4.1.21296.1.2.53.2.1 | TablesupportedGainRangeTable | not-accessible | current | Supported gain range(s), min. and max. gain |
| 1.3.6.1.4.1.21296.1.2.53.2.1.1 | RowsupportedGainRangeEntry | not-accessible | current | Entry of supportedGainRangeTable |
| 1.3.6.1.4.1.21296.1.2.53.2.1.1.1 | ColumnsupportedGainRangeGainRangeType | read-only | current | Type of Gain Range |
| 1.3.6.1.4.1.21296.1.2.53.2.1.1.2 | ColumnsupportedGainRangeGainRangeMin | read-only | current | The minimum settable gain-target for this type of range ('standard'/ 'low'/ 'high'). |
| 1.3.6.1.4.1.21296.1.2.53.2.1.1.3 | ColumnsupportedGainRangeGainRangeMax | read-only | current | The maximum settable gain-target for this type of range ('standard'/ 'low'/ 'high'). |
| 1.3.6.1.4.1.21296.1.2.53.5 | NodeaseIdlerSource | |||
| 1.3.6.1.4.1.21296.1.2.53.5.1 | TableaseIdlerSourceTable | not-accessible | current | Amplifier ASE container. |
| 1.3.6.1.4.1.21296.1.2.53.5.1.1 | RowaseIdlerSourceEntry | not-accessible | current | Entry of aseIdlerSourceTable |
| 1.3.6.1.4.1.21296.1.2.53.5.1.1.1 | ColumnaseIdlerSourceName | read-only | current | Non-configurable name: derived from chass/slot and degree. |
| 1.3.6.1.4.1.21296.1.2.53.5.1.1.2 | ColumnaseIdlerSourceSupportingCard | read-only | current | Card that holds this |
| 1.3.6.1.4.1.21296.1.2.53.5.1.1.3 | ColumnaseIdlerSourceSupportingInputPort | read-only | current | Rx (input) Port that hold this objectThis is originally a YANG leaf-list, here encoded as a comma separated list of values. |
| 1.3.6.1.4.1.21296.1.2.53.5.1.1.4 | ColumnaseIdlerSourceSupportingOutputPort | read-only | current | Tx (output) Port that hold this objectThis is originally a YANG leaf-list, here encoded as a comma separated list of values. |
| 1.3.6.1.4.1.21296.1.2.53.5.1.1.5 | ColumnaseIdlerSourceAID | read-only | current | Resource Access Identifier (AID). Identifies an instance within a specific resource type. |
| 1.3.6.1.4.1.21296.1.2.53.5.1.1.6 | ColumnaseIdlerSourceAdminState | read-only | current | The administrative state of the managed object. default value :unlock |
| 1.3.6.1.4.1.21296.1.2.53.5.1.1.7 | ColumnaseIdlerSourceOperState | read-only | current | The operational state of this object. default value :disabled |
| 1.3.6.1.4.1.21296.1.2.53.5.1.1.8 | ColumnaseIdlerSourceAvailState | read-only | current | Availability state of an entity. |
| 1.3.6.1.4.1.21296.1.2.53.5.1.1.9 | ColumnaseIdlerSourceLabel | read-only | current | The reply will be truncated in 128 bytes. User label. |
| 1.3.6.1.4.1.21296.1.2.53.5.1.1.10 | ColumnaseIdlerSourceFunction | read-only | current | Which NE function the ne-function object works as. |
| 1.3.6.1.4.1.21296.1.2.53.5.1.1.11 | ColumnaseIdlerSourceAlarmReportControl | read-only | current | Controls the reporting of alarms for this particular object. default value :allowed |
| 1.3.6.1.4.1.21296.1.2.53.5.1.1.12 | ColumnaseIdlerSourcePumpEnable | read-only | current | ASE Idler source enabling. default value :disabled |
| 1.3.6.1.4.1.21296.1.2.53.5.1.1.13 | ColumnaseIdlerSourcePumpState | read-only | current | The state of the ASE Idler pump. default value :disabled |
| 1.3.6.1.4.1.21296.1.2.53.5.1.1.14 | ColumnaseIdlerSourceTargetOutputPower | read-only | current | ASE pump output power required (if manually configured). default value :13 |
| 1.3.6.1.4.1.21296.1.2.54 | NodeampRaman | |||
| 1.3.6.1.4.1.21296.1.2.54.1 | NodeamplifierRaman | |||
| 1.3.6.1.4.1.21296.1.2.54.1.1 | TableamplifierRamanTable | not-accessible | current | Amplifier Raman container. |
| 1.3.6.1.4.1.21296.1.2.54.1.1.1 | RowamplifierRamanEntry | not-accessible | current | Entry of amplifierRamanTable |
| 1.3.6.1.4.1.21296.1.2.54.1.1.1.1 | ColumnamplifierRamanName | read-only | current | Non-configurable name: derived from chass/slot and degree. |
| 1.3.6.1.4.1.21296.1.2.54.1.1.1.2 | ColumnamplifierRamanSupportingCard | read-only | current | Card that holds this |
| 1.3.6.1.4.1.21296.1.2.54.1.1.1.3 | ColumnamplifierRamanSupportingInputPort | read-only | current | Rx (input) Port that hold this objectThis is originally a YANG leaf-list, here encoded as a comma separated list of values. |
| 1.3.6.1.4.1.21296.1.2.54.1.1.1.4 | ColumnamplifierRamanSupportingOutputPort | read-only | current | Tx (output) Port that hold this objectThis is originally a YANG leaf-list, here encoded as a comma separated list of values. |
| 1.3.6.1.4.1.21296.1.2.54.1.1.1.5 | ColumnamplifierRamanAID | read-only | current | Resource Access Identifier (AID). Identifies an instance within a specific resource type. |
| 1.3.6.1.4.1.21296.1.2.54.1.1.1.6 | ColumnamplifierRamanAdminState | read-only | current | The administrative state of the managed object. default value :unlock |
| 1.3.6.1.4.1.21296.1.2.54.1.1.1.7 | ColumnamplifierRamanOperState | read-only | current | The operational state of this object. default value :disabled |
| 1.3.6.1.4.1.21296.1.2.54.1.1.1.8 | ColumnamplifierRamanAvailState | read-only | current | Availability state of an entity. |
| 1.3.6.1.4.1.21296.1.2.54.1.1.1.9 | ColumnamplifierRamanLabel | read-only | current | The reply will be truncated in 128 bytes. User label. |
| 1.3.6.1.4.1.21296.1.2.54.1.1.1.10 | ColumnamplifierRamanFunction | read-only | current | Which NE function the ne-function object works as. |
| 1.3.6.1.4.1.21296.1.2.54.1.1.1.11 | ColumnamplifierRamanAlarmReportControl | read-only | current | Controls the reporting of alarms for this particular object. default value :allowed |
| 1.3.6.1.4.1.21296.1.2.54.1.1.1.12 | ColumnamplifierRamanControlMode | read-only | current | Control Mode for this Raman Amplifier. default value :auto |
| 1.3.6.1.4.1.21296.1.2.54.1.1.1.13 | ColumnamplifierRamanRamanState | read-only | current | The state of the Raman Pump. default value :disabled |
| 1.3.6.1.4.1.21296.1.2.54.1.1.1.14 | ColumnamplifierRamanAmplifierEnable | read-only | current | Enable switch for this Raman. User configuration of Local Raman, and optionally control remote Raman card. default value :disable-local-and-remote |
| 1.3.6.1.4.1.21296.1.2.54.1.1.1.15 | ColumnamplifierRamanConnectedAmplifier | read-only | current | SYSTEM reports the degree that corresponds to the amplifier where Raman is fiber connected to. If Raman is not fiber connected, then SYSTEM returns 'not-specif… |
| 1.3.6.1.4.1.21296.1.2.54.1.1.1.16 | ColumnamplifierRamanConnectedAmpEdfaOptimumGain | read-only | current | Connected EDFA Optimum Gain; 0 means no known optimum gain, in case of disaggregated Raman. UNITS:dB default value :0 |
| 1.3.6.1.4.1.21296.1.2.54.1.1.1.17 | ColumnamplifierRamanTotalPumpPower | read-only | current | Operating Total Pump Power. |
| 1.3.6.1.4.1.21296.1.2.54.1.1.1.18 | ColumnamplifierRamanTargetRamanGain | read-only | current | Target Raman Gain, configurable in case control-mode = manual. In case control-mode = auto, this is then ignored. |
| 1.3.6.1.4.1.21296.1.2.54.1.1.1.19 | ColumnamplifierRamanActualRamanSignalGain | read-only | current | PCL output to express the gain for the raman signal Conditions:/ne/l0-mode-op != 'hsc-ols' |
| 1.3.6.1.4.1.21296.1.2.54.1.1.1.20 | ColumnamplifierRamanActualRamanOscGain | read-only | current | PCL output to express the gain for the raman OSC Conditions:/ne/l0-mode-op != 'hsc-ols' |
| 1.3.6.1.4.1.21296.1.2.54.1.1.1.21 | ColumnamplifierRamanNumberOfPumps | read-only | current | Number of pumps for the required-equipped card. |
| 1.3.6.1.4.1.21296.1.2.54.1.1.1.23 | ColumnamplifierRamanControlState | read-only | current | Indicates the current state of the power control adjustment for the ramam amplifier. |
| 1.3.6.1.4.1.21296.1.2.54.2 | NodepumpPower | |||
| 1.3.6.1.4.1.21296.1.2.54.2.1 | TablepumpPowerTable | not-accessible | current | Target Pump Power, as configured by the user, for each pump. If control-mode = auto, value(s) configured are irrelevant. |
| 1.3.6.1.4.1.21296.1.2.54.2.1.1 | RowpumpPowerEntry | not-accessible | current | Entry of pumpPowerTable |
| 1.3.6.1.4.1.21296.1.2.54.2.1.1.1 | ColumnpumpPowerPumpId | read-only | current | 'pump-id' is an integer identifying the number of the pump. |
| 1.3.6.1.4.1.21296.1.2.54.2.1.1.2 | ColumnpumpPowerTargetPumpPower | read-only | current | Raman Pump Power required. Conditions:../../control-mode = 'manual' |
| 1.3.6.1.4.1.21296.1.2.54.2.1.1.3 | ColumnpumpPowerConfiguredPumpPower | read-only | current | The pump power configured in the hardware. Value can be derived automatically, if control-mode is auto, or otherwise via the target-pump-power. |
| 1.3.6.1.4.1.21296.1.2.54.2.1.1.4 | ColumnpumpPowerActualPumpPower | read-only | current | The actual values which are currently measured in each pump. default value :-99 |
| 1.3.6.1.4.1.21296.1.2.54.2.1.1.5 | ColumnpumpPowerMinTargetPumpPower | read-only | current | Minimum target pump power. |
| 1.3.6.1.4.1.21296.1.2.54.2.1.1.6 | ColumnpumpPowerMaxTargetPumpPower | read-only | current | Maximum target pump power. |
| 1.3.6.1.4.1.21296.1.2.55 | Nodeotdr | |||
| 1.3.6.1.4.1.21296.1.2.55.1 | NodeotdrPtp | |||
| 1.3.6.1.4.1.21296.1.2.55.1.1 | TableotdrPtpTable | not-accessible | current | Otdr-ptp container containing attrbutes suppoting OTDR ptp per port. |
| 1.3.6.1.4.1.21296.1.2.55.1.1.1 | RowotdrPtpEntry | not-accessible | current | Entry of otdrPtpTable |
| 1.3.6.1.4.1.21296.1.2.55.1.1.1.1 | ColumnotdrPtpName | read-only | current | A generic, configurable name for every facility. |
| 1.3.6.1.4.1.21296.1.2.55.1.1.1.2 | ColumnotdrPtpSupportingCard | read-only | current | Card that holds this facility |
| 1.3.6.1.4.1.21296.1.2.55.1.1.1.3 | ColumnotdrPtpSupportingPort | read-only | current | Ports that hold this facilityThis is originally a YANG leaf-list, here encoded as a comma separated list of values. |
| 1.3.6.1.4.1.21296.1.2.55.1.1.1.4 | ColumnotdrPtpSupportingFacilities | read-only | current | An XPath reference to the parent facilities.This is originally a YANG leaf-list, here encoded as a comma separated list of values. |
| 1.3.6.1.4.1.21296.1.2.55.1.1.1.5 | ColumnotdrPtpSupportedFacilities | read-only | current | An XPath reference to the children facilities.This is originally a YANG leaf-list, here encoded as a comma separated list of values. |
| 1.3.6.1.4.1.21296.1.2.55.1.1.1.6 | ColumnotdrPtpAID | read-only | current | Resource Access Identifier (AID). Identifies an instance within a specific resource type. |
| 1.3.6.1.4.1.21296.1.2.55.1.1.1.7 | ColumnotdrPtpLabel | read-only | current | The reply will be truncated in 128 bytes. User label. |
| 1.3.6.1.4.1.21296.1.2.55.1.1.1.8 | ColumnotdrPtpAdminState | read-only | current | The administrative state of the managed object. default value :unlock |
| 1.3.6.1.4.1.21296.1.2.55.1.1.1.9 | ColumnotdrPtpOperState | read-only | current | The operational state of this object. default value :disabled |
| 1.3.6.1.4.1.21296.1.2.55.1.1.1.10 | ColumnotdrPtpAvailState | read-only | current | Availability state of an entity. |
| 1.3.6.1.4.1.21296.1.2.55.1.1.1.11 | ColumnotdrPtpManagedBy | read-only | current | Describes whether this managed entity was system created or not. Only user created entities can be user deleted. default value :system |
| 1.3.6.1.4.1.21296.1.2.55.1.1.1.12 | ColumnotdrPtpOtdrRange | read-only | current | Specifies the distance range as a basis to calculate the measurement repetition period . UNITS:km default value :auto |
| 1.3.6.1.4.1.21296.1.2.55.1.1.1.13 | ColumnotdrPtpOtdrPulseWidth | read-only | current | Specifies the OTDR pulse width. Pulse-width will decide dynamic range together with other OTDR measurement parameters. UNITS:nano-second default value :auto |
| 1.3.6.1.4.1.21296.1.2.55.1.1.1.14 | ColumnotdrPtpOtdrMeasurementSpeed | read-only | current | This parameter influences the acquisition time, by varying the number of single pulse measurements that are used to calculate an average measurement result. de… |
| 1.3.6.1.4.1.21296.1.2.55.1.1.1.15 | ColumnotdrPtpOtdrIor | read-only | current | Specifies the group index of refraction (IOR) of the fiber to be measured by OTDR. default value :auto |
| 1.3.6.1.4.1.21296.1.2.55.1.1.1.16 | ColumnotdrPtpOtdrFiberType | read-only | current | Specifies the fiber type of the fiber to be measured by OTDR.In case the value is unknown,the evaluation software shall behave identical as for the value SSMF.… |
| 1.3.6.1.4.1.21296.1.2.55.1.1.1.17 | ColumnotdrPtpOtdrResolution | read-only | current | Specifies the OTDR data sampling resolution. default value :auto |
| 1.3.6.1.4.1.21296.1.2.55.1.1.1.18 | ColumnotdrPtpOtdrLastMeasurement | read-only | current | otdr-last-measurement in a date-time format (YYYY-MM-DDThh:mm:ssZ). default value :0000-01-01T00:00:00.00Z |
| 1.3.6.1.4.1.21296.1.2.55.1.1.1.19 | ColumnotdrPtpOtdrLastMeasurementFile | read-only | current | File name will display when the measurement ends with success. |
| 1.3.6.1.4.1.21296.1.2.55.1.1.1.20 | ColumnotdrPtpOtdrFiberBreakDistance | read-only | current | In case the OTDR has clearly identified a fiber break in the last measurement, this attribute shall contain the distance of the fiber break. UNITS:km default v… |
| 1.3.6.1.4.1.21296.1.2.55.1.1.1.21 | ColumnotdrPtpLaunchingFiberLength | read-only | current | Launching fibre length. UNITS:m default value :0 |
| 1.3.6.1.4.1.21296.1.2.55.1.1.1.22 | ColumnotdrPtpOtdrDirectionMode | read-only | current | Specifies the OTDR measurement direction & also indicates if it is in-service or out-of-service measurement. default value :counter-prop-in-service |
| 1.3.6.1.4.1.21296.1.2.55.1.1.1.23 | ColumnotdrPtpPeakPower | read-only | current | Specifies the OTDR peak power. UNITS:dBm default value :auto |
| 1.3.6.1.4.1.21296.1.2.55.2 | NodeotdrInfo | |||
| 1.3.6.1.4.1.21296.1.2.55.2.1 | TableotdrTable | not-accessible | current | Otdr-eqpt container containing attrbutes suppoting OTDR eqpt per card. |
| 1.3.6.1.4.1.21296.1.2.55.2.1.1 | RowotdrEntry | not-accessible | current | Entry of otdrTable |
| 1.3.6.1.4.1.21296.1.2.55.2.1.1.1 | ColumnotdrName | read-only | current | Non-configurable name: derived from chass/slot and degree. |
| 1.3.6.1.4.1.21296.1.2.55.2.1.1.2 | ColumnotdrSupportingCard | read-only | current | Card that holds this |
| 1.3.6.1.4.1.21296.1.2.55.2.1.1.3 | ColumnotdrSupportingInputPort | read-only | current | Rx (input) Port that hold this objectThis is originally a YANG leaf-list, here encoded as a comma separated list of values. |
| 1.3.6.1.4.1.21296.1.2.55.2.1.1.4 | ColumnotdrSupportingOutputPort | read-only | current | Tx (output) Port that hold this objectThis is originally a YANG leaf-list, here encoded as a comma separated list of values. |
| 1.3.6.1.4.1.21296.1.2.55.2.1.1.5 | ColumnotdrAID | read-only | current | Resource Access Identifier (AID). Identifies an instance within a specific resource type. |
| 1.3.6.1.4.1.21296.1.2.55.2.1.1.6 | ColumnotdrAdminState | read-only | current | The administrative state of the managed object. default value :unlock |
| 1.3.6.1.4.1.21296.1.2.55.2.1.1.7 | ColumnotdrOperState | read-only | current | The operational state of this object. default value :disabled |
| 1.3.6.1.4.1.21296.1.2.55.2.1.1.8 | ColumnotdrAvailState | read-only | current | Availability state of an entity. |
| 1.3.6.1.4.1.21296.1.2.55.2.1.1.9 | ColumnotdrLabel | read-only | current | The reply will be truncated in 128 bytes. User label. |
| 1.3.6.1.4.1.21296.1.2.55.2.1.1.10 | ColumnotdrState | read-only | current | Indicating the current status of the OTDR.This status change shall trigger change notification. default value :not-available |
| 1.3.6.1.4.1.21296.1.2.55.2.1.1.11 | ColumnotdrMeasurementTime | read-only | current | Indicating the time remaining in current measurement running. UNITS:second default value :0 |
| 1.3.6.1.4.1.21296.1.2.55.2.1.1.12 | ColumnotdrError | read-only | current | Error message produced when the measurement ends with error. |
| 1.3.6.1.4.1.21296.1.2.55.2.1.1.13 | ColumnotdrLaserState | read-only | current | Indicating the current status of the OTDR laser. default value :not-available |
| 1.3.6.1.4.1.21296.1.2.55.2.1.1.14 | ColumnotdrMeasurementPort | read-only | current | 0 indicates that the card is not measuring any port and non-zero indicates the OTDR port number where a measurement is currently taking place. default value :0 |
| 1.3.6.1.4.1.21296.1.2.55.2.1.1.15 | ColumnotdrAlarmReportControl | read-only | current | Controls the reporting of alarms for this particular object. default value :allowed |
| 1.3.6.1.4.1.21296.1.2.55.2.1.1.16 | ColumnotdrMeasurementDirection | read-only | current | Indicates the Scan direction. default value :not-available |
| 1.3.6.1.4.1.21296.1.2.55.2.1.1.17 | ColumnotdrOngoingMeasurementProfile | read-only | current | Shows which pre-defined OTDR measurement profile is in progress. . default value :none |
| 1.3.6.1.4.1.21296.1.2.55.2.1.1.18 | ColumnotdrFilePrefixRequested | read-only | current | The reply will be truncated in 128 bytes. Indicating the requested file name prefix for RD66 and D2ILA OTDR test results. Synced from otdr-file-prefix. Only ap… |
| 1.3.6.1.4.1.21296.1.2.56 | Nodedsc | |||
| 1.3.6.1.4.1.21296.1.2.56.1 | NodedscInfo | |||
| 1.3.6.1.4.1.21296.1.2.56.1.1 | TabledscTable | not-accessible | current | Facility describing the dsc. Refer to G.709.1 and G.709.3 |
| 1.3.6.1.4.1.21296.1.2.56.1.1.1 | RowdscEntry | not-accessible | current | Entry of dscTable |
| 1.3.6.1.4.1.21296.1.2.56.1.1.1.1 | ColumndscName | read-only | current | A generic, configurable name for every facility. |
| 1.3.6.1.4.1.21296.1.2.56.1.1.1.2 | ColumndscSupportingCard | read-only | current | Card that holds this facility |
| 1.3.6.1.4.1.21296.1.2.56.1.1.1.3 | ColumndscSupportingPort | read-only | current | Ports that hold this facilityThis is originally a YANG leaf-list, here encoded as a comma separated list of values. |
| 1.3.6.1.4.1.21296.1.2.56.1.1.1.4 | ColumndscSupportingFacilities | read-only | current | An XPath reference to the parent facilities.This is originally a YANG leaf-list, here encoded as a comma separated list of values. |
| 1.3.6.1.4.1.21296.1.2.56.1.1.1.5 | ColumndscSupportedFacilities | read-only | current | An XPath reference to the children facilities.This is originally a YANG leaf-list, here encoded as a comma separated list of values. |
| 1.3.6.1.4.1.21296.1.2.56.1.1.1.6 | ColumndscAID | read-only | current | Resource Access Identifier (AID). Identifies an instance within a specific resource type. |
| 1.3.6.1.4.1.21296.1.2.56.1.1.1.7 | ColumndscLabel | read-only | current | The reply will be truncated in 128 bytes. User label. |
| 1.3.6.1.4.1.21296.1.2.56.1.1.1.8 | ColumndscAdminState | read-only | current | The administrative state of the managed object. default value :unlock |
| 1.3.6.1.4.1.21296.1.2.56.1.1.1.9 | ColumndscOperState | read-only | current | The operational state of this object. default value :disabled |
| 1.3.6.1.4.1.21296.1.2.56.1.1.1.10 | ColumndscAvailState | read-only | current | Availability state of an entity. |
| 1.3.6.1.4.1.21296.1.2.56.1.1.1.11 | ColumndscManagedBy | read-only | current | Describes whether this managed entity was system created or not. Only user created entities can be user deleted. default value :system |
| 1.3.6.1.4.1.21296.1.2.56.1.1.1.12 | ColumndscAlarmReportControl | read-only | current | Controls the reporting of alarms for this particular object. default value :allowed |
| 1.3.6.1.4.1.21296.1.2.57 | NodedscGroup | |||
| 1.3.6.1.4.1.21296.1.2.57.1 | NodedscGroupInfo | |||
| 1.3.6.1.4.1.21296.1.2.57.1.1 | TabledscGroupTable | not-accessible | current | Facility describing the dsc-group. |
| 1.3.6.1.4.1.21296.1.2.57.1.1.1 | RowdscGroupEntry | not-accessible | current | Entry of dscGroupTable |
| 1.3.6.1.4.1.21296.1.2.57.1.1.1.1 | ColumndscGroupName | read-only | current | A generic, configurable name for every facility. |
| 1.3.6.1.4.1.21296.1.2.57.1.1.1.2 | ColumndscGroupSupportingCard | read-only | current | Card that holds this facility |
| 1.3.6.1.4.1.21296.1.2.57.1.1.1.3 | ColumndscGroupSupportingPort | read-only | current | Ports that hold this facilityThis is originally a YANG leaf-list, here encoded as a comma separated list of values. |
| 1.3.6.1.4.1.21296.1.2.57.1.1.1.4 | ColumndscGroupSupportingFacilities | read-only | current | An XPath reference to the parent facilities.This is originally a YANG leaf-list, here encoded as a comma separated list of values. |
| 1.3.6.1.4.1.21296.1.2.57.1.1.1.5 | ColumndscGroupSupportedFacilities | read-only | current | An XPath reference to the children facilities.This is originally a YANG leaf-list, here encoded as a comma separated list of values. |
| 1.3.6.1.4.1.21296.1.2.57.1.1.1.6 | ColumndscGroupAID | read-only | current | Resource Access Identifier (AID). Identifies an instance within a specific resource type. |
| 1.3.6.1.4.1.21296.1.2.57.1.1.1.7 | ColumndscGroupLabel | read-only | current | The reply will be truncated in 128 bytes. User label. |
| 1.3.6.1.4.1.21296.1.2.57.1.1.1.8 | ColumndscGroupAdminState | read-only | current | The administrative state of the managed object. default value :unlock |
| 1.3.6.1.4.1.21296.1.2.57.1.1.1.9 | ColumndscGroupOperState | read-only | current | The operational state of this object. default value :disabled |
| 1.3.6.1.4.1.21296.1.2.57.1.1.1.10 | ColumndscGroupAvailState | read-only | current | Availability state of an entity. |
| 1.3.6.1.4.1.21296.1.2.57.1.1.1.11 | ColumndscGroupManagedBy | read-only | current | Describes whether this managed entity was system created or not. Only user created entities can be user deleted. default value :system |
| 1.3.6.1.4.1.21296.1.2.57.1.1.1.12 | ColumndscGroupAlarmReportControl | read-only | current | Controls the reporting of alarms for this particular object. default value :allowed |
| 1.3.6.1.4.1.21296.1.2.57.1.1.1.13 | ColumndscGroupCarriers | read-only | current | The carrier associated to this facility. Possible values can be any card/resources/supported-carriers. |
| 1.3.6.1.4.1.21296.1.2.57.1.1.1.14 | ColumndscGroupRate | read-only | current | Carried signal basic rate class |
| 1.3.6.1.4.1.21296.1.2.57.1.1.1.15 | ColumndscGroupInstanceId | read-only | current | For identifying the dsc-group logic number, is added to the dsc-group model for creation. The attribute is optional and will be automatically created if not sp… |
| 1.3.6.1.4.1.21296.1.2.57.1.1.1.16 | ColumndscGroupGroupId | read-only | current | Optional parameter on dsc-group creation, specifies the dsc-group group number that the dsc is a member of for a given optical-carrier. If not provided, it is … |
| 1.3.6.1.4.1.21296.1.2.57.1.1.1.17 | ColumndscGroupPreFecQSigDegThreshold | read-only | current | The threshold based on which the PRE-FEC-Q-SIGNAL-DEGRADE alarm is raised. 0 implies threshold crossing alarming disabled. Specific sub-range is per carrier us… |
| 1.3.6.1.4.1.21296.1.2.57.1.1.1.18 | ColumndscGroupPreFecQSigDegHysteresis | read-only | current | Hysteresis to account for raising of the PRE-FEC-Q-SIGNAL-DEGRADE alarm. UNITS:dB default value :0.5 |
| 1.3.6.1.4.1.21296.1.2.57.1.1.1.19 | ColumndscGroupPostFecQSigDegThreshold | read-only | current | The threshold based on which the POST-FEC-Q-SIGNAL-DEGRADE alarm is raised. UNITS:dB default value :18.0 |
| 1.3.6.1.4.1.21296.1.2.57.1.1.1.20 | ColumndscGroupPostFecQSigDegHysteresis | read-only | current | Hysteresis to account for raising of the POST-FEC-Q-SIGNAL-DEGRADE alarm. UNITS:dB default value :0.5 |
| 1.3.6.1.4.1.21296.1.2.57.1.1.1.21 | ColumndscGroupDgdHighThreshold | read-only | current | The threshold to raise the DGD-OORH alarm. UNITS:ps default value :100 |
| 1.3.6.1.4.1.21296.1.2.58 | Nodeinterlaken | |||
| 1.3.6.1.4.1.21296.1.2.58.1 | NodeinterlakenInfo | |||
| 1.3.6.1.4.1.21296.1.2.58.1.1 | TableinterlakenTable | not-accessible | current | IOA YANG model describing the interlaken interface, which is used to monitor the interlaken connection between the paired slot on G30 via front DAC cable (not … |
| 1.3.6.1.4.1.21296.1.2.58.1.1.1 | RowinterlakenEntry | not-accessible | current | Entry of interlakenTable |
| 1.3.6.1.4.1.21296.1.2.58.1.1.1.1 | ColumninterlakenName | read-only | current | A generic, configurable name for every facility. |
| 1.3.6.1.4.1.21296.1.2.58.1.1.1.2 | ColumninterlakenSupportingCard | read-only | current | Card that holds this facility |
| 1.3.6.1.4.1.21296.1.2.58.1.1.1.3 | ColumninterlakenSupportingPort | read-only | current | Ports that hold this facilityThis is originally a YANG leaf-list, here encoded as a comma separated list of values. |
| 1.3.6.1.4.1.21296.1.2.58.1.1.1.4 | ColumninterlakenSupportingFacilities | read-only | current | An XPath reference to the parent facilities.This is originally a YANG leaf-list, here encoded as a comma separated list of values. |
| 1.3.6.1.4.1.21296.1.2.58.1.1.1.5 | ColumninterlakenSupportedFacilities | read-only | current | An XPath reference to the children facilities.This is originally a YANG leaf-list, here encoded as a comma separated list of values. |
| 1.3.6.1.4.1.21296.1.2.58.1.1.1.6 | ColumninterlakenAID | read-only | current | Resource Access Identifier (AID). Identifies an instance within a specific resource type. |
| 1.3.6.1.4.1.21296.1.2.58.1.1.1.7 | ColumninterlakenLabel | read-only | current | The reply will be truncated in 128 bytes. User label. |
| 1.3.6.1.4.1.21296.1.2.58.1.1.1.8 | ColumninterlakenAdminState | read-only | current | The administrative state of the managed object. default value :unlock |
| 1.3.6.1.4.1.21296.1.2.58.1.1.1.9 | ColumninterlakenOperState | read-only | current | The operational state of this object. default value :disabled |
| 1.3.6.1.4.1.21296.1.2.58.1.1.1.10 | ColumninterlakenAvailState | read-only | current | Availability state of an entity. |
| 1.3.6.1.4.1.21296.1.2.58.1.1.1.11 | ColumninterlakenManagedBy | read-only | current | Describes whether this managed entity was system created or not. Only user created entities can be user deleted. default value :system |
| 1.3.6.1.4.1.21296.1.2.58.1.1.1.12 | ColumninterlakenAlarmReportControl | read-only | current | Controls the reporting of alarms for this particular object. default value :allowed |
| 1.3.6.1.4.1.21296.1.2.58.1.1.1.13 | ColumninterlakenCapacity | read-only | current | Total capacity for interlaken interface. |
| 1.3.6.1.4.1.21296.1.2.58.1.1.1.14 | ColumninterlakenLoopback | read-only | current | Loopback mode.Useful to debug on the fiber connection. default value :none |
| 1.3.6.1.4.1.21296.1.2.59 | Nodefips | |||
| 1.3.6.1.4.1.21296.1.2.59.1 | NodefipsInfo | |||
| 1.3.6.1.4.1.21296.1.2.59.1.1 | ScalarfipsMode | read-only | current | User set mode of FIPS. This flag is set via fips RPC. default value :disabled |
| 1.3.6.1.4.1.21296.1.2.59.1.2 | ScalarfipsState | read-only | current | Current state of FIPS service. Conditions:../fips-mode = 'enabled' default value :fips-pre-operational-self-test |
| 1.3.6.1.4.1.21296.1.2.59.1.3 | ScalarfipsErrorReason | read-only | current | Each entry having reason for fips error per card; if no failures exist, no entries will be seen.This is originally a YANG leaf-list, here encoded as a comma se… |
| 1.3.6.1.4.1.21296.1.2.60 | NodeampTof | |||
| 1.3.6.1.4.1.21296.1.2.60.1 | NodeamplifierTof | |||
| 1.3.6.1.4.1.21296.1.2.60.1.1 | TableamplifierTofTable | not-accessible | current | Amplifier/Tunable Optical Filter container. |
| 1.3.6.1.4.1.21296.1.2.60.1.1.1 | RowamplifierTofEntry | not-accessible | current | Entry of amplifierTofTable |
| 1.3.6.1.4.1.21296.1.2.60.1.1.1.1 | ColumnamplifierTofName | read-only | current | Non-configurable name: derived from chass/slot and degree. |
| 1.3.6.1.4.1.21296.1.2.60.1.1.1.2 | ColumnamplifierTofSupportingCard | read-only | current | Card that holds this |
| 1.3.6.1.4.1.21296.1.2.60.1.1.1.3 | ColumnamplifierTofSupportingInputPort | read-only | current | Rx (input) Port that hold this objectThis is originally a YANG leaf-list, here encoded as a comma separated list of values. |
| 1.3.6.1.4.1.21296.1.2.60.1.1.1.4 | ColumnamplifierTofSupportingOutputPort | read-only | current | Tx (output) Port that hold this objectThis is originally a YANG leaf-list, here encoded as a comma separated list of values. |
| 1.3.6.1.4.1.21296.1.2.60.1.1.1.5 | ColumnamplifierTofAID | read-only | current | Resource Access Identifier (AID). Identifies an instance within a specific resource type. |
| 1.3.6.1.4.1.21296.1.2.60.1.1.1.6 | ColumnamplifierTofAdminState | read-only | current | The administrative state of the managed object. default value :unlock |
| 1.3.6.1.4.1.21296.1.2.60.1.1.1.7 | ColumnamplifierTofOperState | read-only | current | The operational state of this object. default value :disabled |
| 1.3.6.1.4.1.21296.1.2.60.1.1.1.8 | ColumnamplifierTofAvailState | read-only | current | Availability state of an entity. |
| 1.3.6.1.4.1.21296.1.2.60.1.1.1.9 | ColumnamplifierTofLabel | read-only | current | The reply will be truncated in 128 bytes. User label. |
| 1.3.6.1.4.1.21296.1.2.60.1.1.1.10 | ColumnamplifierTofFunction | read-only | current | Which NE function the ne-function object works as. |
| 1.3.6.1.4.1.21296.1.2.60.1.1.1.11 | ColumnamplifierTofAlarmReportControl | read-only | current | Controls the reporting of alarms for this particular object. default value :allowed |
| 1.3.6.1.4.1.21296.1.2.60.1.1.1.12 | ColumnamplifierTofFrequency | read-only | current | The laser frequency for amplifier-tof. UNITS:MHz |
| 1.3.6.1.4.1.21296.1.2.60.1.1.1.13 | ColumnamplifierTofAmplifierEnable | read-only | current | Enable switch for this amplifier-tof. default value :disabled |
| 1.3.6.1.4.1.21296.1.2.60.1.1.1.14 | ColumnamplifierTofAmplifierMode | read-only | current | The operating mode of the amplifier-tof. default value :constant-power |
| 1.3.6.1.4.1.21296.1.2.61 | NodeocmPtp | |||
| 1.3.6.1.4.1.21296.1.2.61.1 | NodeocmPtpInfo | |||
| 1.3.6.1.4.1.21296.1.2.61.1.1 | TableocmPtpTable | not-accessible | current | List of OCM PTPs. |
| 1.3.6.1.4.1.21296.1.2.61.1.1.1 | RowocmPtpEntry | not-accessible | current | Entry of ocmPtpTable |
| 1.3.6.1.4.1.21296.1.2.61.1.1.1.1 | ColumnocmPtpName | read-only | current | A generic, configurable name for every facility. |
| 1.3.6.1.4.1.21296.1.2.61.1.1.1.2 | ColumnocmPtpSupportingCard | read-only | current | Card that holds this facility |
| 1.3.6.1.4.1.21296.1.2.61.1.1.1.3 | ColumnocmPtpSupportingPort | read-only | current | Ports that hold this facilityThis is originally a YANG leaf-list, here encoded as a comma separated list of values. |
| 1.3.6.1.4.1.21296.1.2.61.1.1.1.4 | ColumnocmPtpSupportingFacilities | read-only | current | An XPath reference to the parent facilities.This is originally a YANG leaf-list, here encoded as a comma separated list of values. |
| 1.3.6.1.4.1.21296.1.2.61.1.1.1.5 | ColumnocmPtpSupportedFacilities | read-only | current | An XPath reference to the children facilities.This is originally a YANG leaf-list, here encoded as a comma separated list of values. |
| 1.3.6.1.4.1.21296.1.2.61.1.1.1.6 | ColumnocmPtpAID | read-only | current | Resource Access Identifier (AID). Identifies an instance within a specific resource type. |
| 1.3.6.1.4.1.21296.1.2.61.1.1.1.7 | ColumnocmPtpLabel | read-only | current | The reply will be truncated in 128 bytes. User label. |
| 1.3.6.1.4.1.21296.1.2.61.1.1.1.8 | ColumnocmPtpAdminState | read-only | current | The administrative state of the managed object. default value :unlock |
| 1.3.6.1.4.1.21296.1.2.61.1.1.1.9 | ColumnocmPtpOperState | read-only | current | The operational state of this object. default value :disabled |
| 1.3.6.1.4.1.21296.1.2.61.1.1.1.10 | ColumnocmPtpAvailState | read-only | current | Availability state of an entity. |
| 1.3.6.1.4.1.21296.1.2.61.1.1.1.11 | ColumnocmPtpManagedBy | read-only | current | Describes whether this managed entity was system created or not. Only user created entities can be user deleted. default value :system |
| 1.3.6.1.4.1.21296.1.2.61.1.1.1.12 | ColumnocmPtpOcmEnable | read-only | current | Enables regular power monitoring. default value :disabled |
| 1.3.6.1.4.1.21296.1.2.61.1.1.1.13 | ColumnocmPtpAdDirection | read-only | current | Reference to the AD (coupler/ splitter) DWDM port. default value :ingress |
| 1.3.6.1.4.1.21296.1.2.61.1.1.1.14 | ColumnocmPtpLastMeasurement | read-only | current | Last OCM scan measurement. default value :never |
| 1.3.6.1.4.1.21296.1.2.61.1.1.1.15 | ColumnocmPtpAdgNumber | read-only | current | ADG reference. default value :0 |
| 1.3.6.1.4.1.21296.1.2.61.1.1.1.16 | ColumnocmPtpMonitoringState | read-only | current | System reports 'enabled' when complete connectivity at AD is established, and OCM measurement is possible. default value :disabled |
| 1.3.6.1.4.1.21296.1.2.61.2 | NodemonitoredChannel | |||
| 1.3.6.1.4.1.21296.1.2.61.2.1 | TablemonitoredChannelTable | not-accessible | current | List of detected carriers within the configured oxcon(s). |
| 1.3.6.1.4.1.21296.1.2.61.2.1.1 | RowmonitoredChannelEntry | not-accessible | current | Entry of monitoredChannelTable |
| 1.3.6.1.4.1.21296.1.2.61.2.1.1.1 | ColumnmonitoredChannelFrequency | read-only | current | Nominal Center Frequency of the carrier (channel). |
| 1.3.6.1.4.1.21296.1.2.61.2.1.1.2 | ColumnmonitoredChannelMonitoredOpticalPower | read-only | current | Measured power for the corresponding carrier (channel). default value :-99 |
| 1.3.6.1.4.1.21296.1.2.61.2.1.1.3 | ColumnmonitoredChannelMonitoredWidth | read-only | current | Carrier (channel) width configured at the NMC within the oxcon source/destination; 0 stands for no valid carrier now. default value :0 |
| 1.3.6.1.4.1.21296.1.2.61.3 | NodeocmMp | |||
| 1.3.6.1.4.1.21296.1.2.61.3.1 | TableocmMpTable | not-accessible | current | List of OCM Monitoring Points - monitored channels OPM Powers. |
| 1.3.6.1.4.1.21296.1.2.61.3.1.1 | RowocmMpEntry | not-accessible | current | Entry of ocmMpTable |
| 1.3.6.1.4.1.21296.1.2.61.3.1.1.1 | ColumnocmMpName | read-only | current | A generic, configurable name for every facility. |
| 1.3.6.1.4.1.21296.1.2.61.3.1.1.2 | ColumnocmMpSupportingCard | read-only | current | Card that holds this facility |
| 1.3.6.1.4.1.21296.1.2.61.3.1.1.3 | ColumnocmMpSupportingPort | read-only | current | Ports that hold this facilityThis is originally a YANG leaf-list, here encoded as a comma separated list of values. |
| 1.3.6.1.4.1.21296.1.2.61.3.1.1.4 | ColumnocmMpSupportingFacilities | read-only | current | An XPath reference to the parent facilities.This is originally a YANG leaf-list, here encoded as a comma separated list of values. |
| 1.3.6.1.4.1.21296.1.2.61.3.1.1.5 | ColumnocmMpSupportedFacilities | read-only | current | An XPath reference to the children facilities.This is originally a YANG leaf-list, here encoded as a comma separated list of values. |
| 1.3.6.1.4.1.21296.1.2.61.3.1.1.6 | ColumnocmMpAID | read-only | current | Resource Access Identifier (AID). Identifies an instance within a specific resource type. |
| 1.3.6.1.4.1.21296.1.2.61.3.1.1.7 | ColumnocmMpLabel | read-only | current | The reply will be truncated in 128 bytes. User label. |
| 1.3.6.1.4.1.21296.1.2.61.3.1.1.8 | ColumnocmMpAdminState | read-only | current | The administrative state of the managed object. default value :unlock |
| 1.3.6.1.4.1.21296.1.2.61.3.1.1.9 | ColumnocmMpOperState | read-only | current | The operational state of this object. default value :disabled |
| 1.3.6.1.4.1.21296.1.2.61.3.1.1.10 | ColumnocmMpAvailState | read-only | current | Availability state of an entity. |
| 1.3.6.1.4.1.21296.1.2.61.3.1.1.11 | ColumnocmMpManagedBy | read-only | current | Describes whether this managed entity was system created or not. Only user created entities can be user deleted. default value :system |
| 1.3.6.1.4.1.21296.1.2.61.3.1.1.12 | ColumnocmMpOcmEnable | read-only | current | Enables regular power monitoring. default value :enabled |
| 1.3.6.1.4.1.21296.1.2.61.3.1.1.13 | ColumnocmMpMonitoredPort | read-only | current | The port that is being monitored. Can be different of supporting-port for a non-integrated OCM. default value :not-applicable |
| 1.3.6.1.4.1.21296.1.2.61.3.1.1.14 | ColumnocmMpAdDirection | read-only | current | Reference to the AD (coupler/ splitter) DWDM port. default value :ingress |
| 1.3.6.1.4.1.21296.1.2.61.3.1.1.15 | ColumnocmMpMonitoringState | read-only | current | System reports 'enabled' when OMS reference exists. default value :enabled |
| 1.3.6.1.4.1.21296.1.2.61.5 | NodeocmChannel | |||
| 1.3.6.1.4.1.21296.1.2.61.5.1 | TableocmChannelTable | not-accessible | current | List of detected carriers within the configured oxcon(s). |
| 1.3.6.1.4.1.21296.1.2.61.5.1.1 | RowocmChannelEntry | not-accessible | current | Entry of ocmChannelTable |
| 1.3.6.1.4.1.21296.1.2.61.5.1.1.1 | ColumnocmChannelLowerFrequency | read-only | current | Lower frequency of the corresponding spectrum power (OPM-pwr point). |
| 1.3.6.1.4.1.21296.1.2.61.5.1.1.2 | ColumnocmChannelUpperFrequency | read-only | current | Upper frequency of the corresponding spectrum power (OPM-pwr point). |
| 1.3.6.1.4.1.21296.1.2.61.5.1.1.3 | ColumnocmChannelOpmPwr | read-only | current | Optical Parameter Monitor - power. default value :-99 |
| 1.3.6.1.4.1.21296.1.2.61.5.1.1.4 | ColumnocmChannelConnected | read-only | current | Yields 'true' if the channel is configured (involved in an oxcon). default value :false |
| 1.3.6.1.4.1.21296.1.2.62 | Nodetemplates | |||
| 1.3.6.1.4.1.21296.1.2.62.2 | NodetemplateGroup | |||
| 1.3.6.1.4.1.21296.1.2.62.2.1 | TabletemplateGroupTable | not-accessible | current | Represents a configuration template-group, containing a list of template entries. Using this feature, a user can configure what are the default values for conf… |
| 1.3.6.1.4.1.21296.1.2.62.2.1.1 | RowtemplateGroupEntry | not-accessible | current | Entry of templateGroupTable |
| 1.3.6.1.4.1.21296.1.2.62.2.1.1.1 | ColumntemplateGroupName | read-only | current | The name of the template-group. |
| 1.3.6.1.4.1.21296.1.2.62.2.1.1.2 | ColumntemplateGroupEnabled | read-only | current | Whether this template-group is enabled or not. Note: only one template-group can be enabled at a time. Default is 'true' if there is no other template-group en… |
| 1.3.6.1.4.1.21296.1.2.62.2.1.1.3 | ColumntemplateGroupLabel | read-only | current | The reply will be truncated in 128 bytes. User label. |
| 1.3.6.1.4.1.21296.1.2.62.3 | Nodetemplate | |||
| 1.3.6.1.4.1.21296.1.2.62.3.1 | TabletemplateTable | not-accessible | current | A single template entry, allowing an individual rule for defining a default value for a given IOA attribute. A template entry is defined by an object+attribute… |
| 1.3.6.1.4.1.21296.1.2.62.3.1.1 | RowtemplateEntry | not-accessible | current | Entry of templateTable |
| 1.3.6.1.4.1.21296.1.2.62.3.1.1.1 | ColumntemplateName | read-only | current | The name of the template entry within the template-group. |
| 1.3.6.1.4.1.21296.1.2.62.3.1.1.2 | ColumntemplateSequenceId | read-only | current | The id of this template entry, used to define the order in which templates are processed. Lower number ids are processed first. Id can change over the lifetime… |
| 1.3.6.1.4.1.21296.1.2.62.3.1.1.3 | ColumntemplateObject | read-only | current | Object name that this template entry applies to. Needs to match an existing config true IOA object name (representing a container or a list). Alternatively, a … |
| 1.3.6.1.4.1.21296.1.2.62.3.1.1.4 | ColumntemplateAttribute | read-only | current | Attribute name that this template entry applies to. Needs to match a config true attribute in the provided object. |
| 1.3.6.1.4.1.21296.1.2.62.3.1.1.5 | ColumntemplateValue | read-only | current | Attribute value to be used by this template entry. Needs to match a valid value of the selected attribute. Note: even though the value is provided as a string,… |
| 1.3.6.1.4.1.21296.1.2.62.3.1.1.6 | ColumntemplateLabel | read-only | current | The reply will be truncated in 128 bytes. User label. |
| 1.3.6.1.4.1.21296.1.2.62.3.1.1.7 | ColumntemplateCondition | read-only | current | Optional criteria for this template entry to be applied. Template is applied if object+attribute match, and the condition is obeyed. Condition matches the form… |
| 1.3.6.1.4.1.21296.1.2.63 | NodemcF | |||
| 1.3.6.1.4.1.21296.1.2.63.1 | NodemcFInfo | |||
| 1.3.6.1.4.1.21296.1.2.63.1.1 | TablemcFTable | not-accessible | current | MC-F: Media Channel Filler. |
| 1.3.6.1.4.1.21296.1.2.63.1.1.1 | RowmcFEntry | not-accessible | current | Entry of mcFTable |
| 1.3.6.1.4.1.21296.1.2.63.1.1.1.1 | ColumnmcFName | read-only | current | A generic, Assigned name for every facility. |
| 1.3.6.1.4.1.21296.1.2.63.1.1.1.2 | ColumnmcFSupportingFacilities | read-only | current | An XPath reference to the parent facilities.This is originally a YANG leaf-list, here encoded as a comma separated list of values. |
| 1.3.6.1.4.1.21296.1.2.63.1.1.1.3 | ColumnmcFSupportedFacilities | read-only | current | An XPath reference to the children facilities.This is originally a YANG leaf-list, here encoded as a comma separated list of values. |
| 1.3.6.1.4.1.21296.1.2.63.1.1.1.4 | ColumnmcFSupportingCard | read-only | current | Card that holds this facility |
| 1.3.6.1.4.1.21296.1.2.63.1.1.1.5 | ColumnmcFSupportingPort | read-only | current | Ports that hold this facilityThis is originally a YANG leaf-list, here encoded as a comma separated list of values. |
| 1.3.6.1.4.1.21296.1.2.63.1.1.1.8 | ColumnmcFAID | read-only | current | Resource Access Identifier (AID). Identifies an instance within a specific resource type. |
| 1.3.6.1.4.1.21296.1.2.63.1.1.1.9 | ColumnmcFLowerFrequency | read-only | current | Lower Frequency of a Media Channel. |
| 1.3.6.1.4.1.21296.1.2.63.1.1.1.10 | ColumnmcFUpperFrequency | read-only | current | Upper Frequency of a Media Channel. |
| 1.3.6.1.4.1.21296.1.2.63.1.1.1.11 | ColumnmcFSlotWidth | read-only | current | Slot width, as calculated by the system, from upper-frequency - lower-frequency. |
| 1.3.6.1.4.1.21296.1.2.64 | NodenmcF | |||
| 1.3.6.1.4.1.21296.1.2.64.1 | NodenmcFInfo | |||
| 1.3.6.1.4.1.21296.1.2.64.1.1 | TablenmcFTable | not-accessible | current | NMC: Network Media Channel Filler (ASE) facility. A network media channel is a logical entity representing the optical signal carrying the service. The optical… |
| 1.3.6.1.4.1.21296.1.2.64.1.1.1 | RownmcFEntry | not-accessible | current | Entry of nmcFTable |
| 1.3.6.1.4.1.21296.1.2.64.1.1.1.1 | ColumnnmcFName | read-only | current | A generic, assigned name for every facility. |
| 1.3.6.1.4.1.21296.1.2.64.1.1.1.2 | ColumnnmcFSupportingFacilities | read-only | current | An XPath reference to the parent facilities.This is originally a YANG leaf-list, here encoded as a comma separated list of values. |
| 1.3.6.1.4.1.21296.1.2.64.1.1.1.3 | ColumnnmcFSupportedFacilities | read-only | current | An XPath reference to the children facilities.This is originally a YANG leaf-list, here encoded as a comma separated list of values. |
| 1.3.6.1.4.1.21296.1.2.64.1.1.1.4 | ColumnnmcFSupportingCard | read-only | current | Card that holds this facility |
| 1.3.6.1.4.1.21296.1.2.64.1.1.1.5 | ColumnnmcFSupportingPort | read-only | current | Ports that hold this facilityThis is originally a YANG leaf-list, here encoded as a comma separated list of values. |
| 1.3.6.1.4.1.21296.1.2.64.1.1.1.7 | ColumnnmcFAID | read-only | current | Resource Access Identifier (AID). Identifies an instance within a specific resource type. |
| 1.3.6.1.4.1.21296.1.2.64.1.1.1.10 | ColumnnmcFAllocLowerFrequency | read-only | current | Allocated Lower Frequency of the NMC Filler |
| 1.3.6.1.4.1.21296.1.2.64.1.1.1.11 | ColumnnmcFAllocUpperFrequency | read-only | current | Allocated Upper Frequency of the NMC Filler |
| 1.3.6.1.4.1.21296.1.2.64.1.1.1.12 | ColumnnmcFAllocBandwidth | read-only | current | Allocated BandWdith of the NMC Filler default value :75000 |
| 1.3.6.1.4.1.21296.1.2.64.1.1.1.13 | ColumnnmcFActualLowerFrequency | read-only | current | Actual lower Frequency of the NMC Filler |
| 1.3.6.1.4.1.21296.1.2.64.1.1.1.14 | ColumnnmcFActualUpperFrequency | read-only | current | Actual Upper Frequency of the NMC Filler |
| 1.3.6.1.4.1.21296.1.2.64.1.1.1.15 | ColumnnmcFActualBandwidth | read-only | current | Actual BandWdith of the NMC Filler default value :0 |
| 1.3.6.1.4.1.21296.1.2.64.1.1.1.16 | ColumnnmcFPowerActualTx | read-only | current | Optical Power Transmitted, actual measurement. |
| 1.3.6.1.4.1.21296.1.2.64.1.1.1.17 | ColumnnmcFPowerActualRx | read-only | current | Optical Power Received, actual measurement. |
| 1.3.6.1.4.1.21296.1.2.64.1.1.1.18 | ColumnnmcFOutputAttenuationCompensationActual | read-only | current | Network Media Channel attenuation adjustment applied by auto-controls to do power targeting in mux direction. |
| 1.3.6.1.4.1.21296.1.2.64.1.1.1.19 | ColumnnmcFAdminState | read-only | current | The administrative state of the managed object. default value :unlock |
| 1.3.6.1.4.1.21296.1.2.64.1.1.1.20 | ColumnnmcFAlarmReportControl | read-only | current | Controls the reporting of alarms for this particular object. default value :allowed |
| 1.3.6.1.4.1.21296.1.2.64.1.1.1.21 | ColumnnmcFMonitoringState | read-only | current | System reports this attribute, to indicate whether the NMC is intended to be in used. As this is system created attribute it is enabled by default. default val… |
| 1.3.6.1.4.1.21296.1.2.65 | NodeioaCidPtp | |||
| 1.3.6.1.4.1.21296.1.2.65.1 | NodecidPtp | |||
| 1.3.6.1.4.1.21296.1.2.65.1.1 | TablecidPtpTable | not-accessible | current | List of CableID facilities. |
| 1.3.6.1.4.1.21296.1.2.65.1.1.1 | RowcidPtpEntry | not-accessible | current | Entry of cidPtpTable |
| 1.3.6.1.4.1.21296.1.2.65.1.1.1.1 | ColumncidPtpName | read-only | current | A generic, configurable name for every facility. |
| 1.3.6.1.4.1.21296.1.2.65.1.1.1.2 | ColumncidPtpSupportingCard | read-only | current | Card that holds this facility |
| 1.3.6.1.4.1.21296.1.2.65.1.1.1.3 | ColumncidPtpSupportingPort | read-only | current | Ports that hold this facilityThis is originally a YANG leaf-list, here encoded as a comma separated list of values. |
| 1.3.6.1.4.1.21296.1.2.65.1.1.1.4 | ColumncidPtpSupportingFacilities | read-only | current | An XPath reference to the parent facilities.This is originally a YANG leaf-list, here encoded as a comma separated list of values. |
| 1.3.6.1.4.1.21296.1.2.65.1.1.1.5 | ColumncidPtpSupportedFacilities | read-only | current | An XPath reference to the children facilities.This is originally a YANG leaf-list, here encoded as a comma separated list of values. |
| 1.3.6.1.4.1.21296.1.2.65.1.1.1.6 | ColumncidPtpAID | read-only | current | Resource Access Identifier (AID). Identifies an instance within a specific resource type. |
| 1.3.6.1.4.1.21296.1.2.65.1.1.1.7 | ColumncidPtpLabel | read-only | current | The reply will be truncated in 128 bytes. User label. |
| 1.3.6.1.4.1.21296.1.2.65.1.1.1.8 | ColumncidPtpAdminState | read-only | current | The administrative state of the managed object. default value :unlock |
| 1.3.6.1.4.1.21296.1.2.65.1.1.1.9 | ColumncidPtpOperState | read-only | current | The operational state of this object. default value :disabled |
| 1.3.6.1.4.1.21296.1.2.65.1.1.1.10 | ColumncidPtpAvailState | read-only | current | Availability state of an entity. |
| 1.3.6.1.4.1.21296.1.2.65.1.1.1.11 | ColumncidPtpManagedBy | read-only | current | Describes whether this managed entity was system created or not. Only user created entities can be user deleted. default value :system |
| 1.3.6.1.4.1.21296.1.2.65.1.1.1.12 | ColumncidPtpUsed | read-only | current | It is true when CableID functionality is supported. default value :false |
| 1.3.6.1.4.1.21296.1.2.66 | NoderamanCalibration | |||
| 1.3.6.1.4.1.21296.1.2.66.1 | NoderamanCalibrationInfo | |||
| 1.3.6.1.4.1.21296.1.2.66.1.1 | TableramanCalibrationTable | not-accessible | current | list contains the calibration results of Automatic raman gain calibration. |
| 1.3.6.1.4.1.21296.1.2.66.1.1.1 | RowramanCalibrationEntry | not-accessible | current | Entry of ramanCalibrationTable |
| 1.3.6.1.4.1.21296.1.2.66.1.1.1.1 | ColumnramanCalibrationName | read-only | current | Name of the group. |
| 1.3.6.1.4.1.21296.1.2.66.1.1.1.2 | ColumnramanCalibrationCalibrationState | read-only | current | Represents the state of the automatic Raman gain calibration process. default value :not-available |
| 1.3.6.1.4.1.21296.1.2.66.1.1.1.3 | ColumnramanCalibrationIntermediateResults | read-only | current | The reply will be truncated in 128 bytes. Indicates the intermediate raman calibration results. default value : |
| 1.3.6.1.4.1.21296.1.2.66.1.1.1.4 | ColumnramanCalibrationGainCalibrationError | read-only | current | Represents the residual gain error after each iteration. UNITS:dB default value :not-available |
| 1.3.6.1.4.1.21296.1.2.66.1.1.1.5 | ColumnramanCalibrationCalibratedDeltaPointloss | read-only | current | The attribute represents the suggested delta-pointloss at the end of each iteration of the automatic Raman gain calibration. UNITS:dB default value :not-availa… |
| 1.3.6.1.4.1.21296.1.2.66.1.1.1.6 | ColumnramanCalibrationLastCalibrationTimestamp | read-only | current | Time when the last time the automatic Raman gain calibration rpc was completed with or without errors. default value :never |
| 1.3.6.1.4.1.21296.1.2.66.1.1.1.7 | ColumnramanCalibrationAdditionalInfo | read-only | current | The reply will be truncated in 128 bytes. indicates any information for troubleshooting when the calibration-state is fail or out-dated. default value : |
| 1.3.6.1.4.1.21296.1.2.66.1.1.1.8 | ColumnramanCalibrationSupportingCard | read-only | current | Card that holds this |
| 1.3.6.1.4.1.21296.1.2.66.1.1.1.9 | ColumnramanCalibrationSupportingInputPort | read-only | current | Rx (input) Port that hold this object |
| 1.3.6.1.4.1.21296.1.2.66.1.1.1.10 | ColumnramanCalibrationAID | read-only | current | Resource Access Identifier (AID). Identifies an instance within a specific resource type. |
| 1.3.6.1.4.1.21296.1.2.66.1.1.1.11 | ColumnramanCalibrationLabel | read-only | current | The reply will be truncated in 128 bytes. User label. |
| 1.3.6.1.4.1.21296.1.2.66.1.1.1.12 | ColumnramanCalibrationFunction | read-only | current | Which NE function the ne-function object works as. |
| 1.3.6.1.4.1.21296.1.2.67 | Nodemacsec | |||
| 1.3.6.1.4.1.21296.1.2.67.1 | NodemacsecEntity | |||
| 1.3.6.1.4.1.21296.1.2.67.1.1 | TablemacsecEntityTable | not-accessible | current | Holds encryption-related configuration and state data for ethernet. |
| 1.3.6.1.4.1.21296.1.2.67.1.1.1 | RowmacsecEntityEntry | not-accessible | current | Entry of macsecEntityTable |
| 1.3.6.1.4.1.21296.1.2.67.1.1.1.1 | ColumnmacsecEntityName | read-only | current | A name for the data path encryption macsec entity (SecY). |
| 1.3.6.1.4.1.21296.1.2.67.1.1.1.2 | ColumnmacsecEntitySupportingFacility | read-only | current | The ethernet that needs data path encryption. |
| 1.3.6.1.4.1.21296.1.2.67.1.1.1.3 | ColumnmacsecEntityEnabled | read-only | current | Indicates whether this SecY is configured and attached to any data path entity. default value :false |
| 1.3.6.1.4.1.21296.1.2.67.1.1.1.4 | ColumnmacsecEntityAID | read-only | current | A system-generated AID for this SecY. |
| 1.3.6.1.4.1.21296.1.2.67.1.1.1.5 | ColumnmacsecEntityOperState | read-only | current | The operational state of this object. default value :disabled |
| 1.3.6.1.4.1.21296.1.2.67.1.1.1.6 | ColumnmacsecEntityAlarmReportControl | read-only | current | Controls the reporting of alarms for this particular object. default value :allowed |
| 1.3.6.1.4.1.21296.1.2.67.1.1.1.8 | ColumnmacsecEntityLinkSecurityControl | read-only | current | Controls the link security policy, to handle data packets when MACsec connection is not available. default value :must-secure |
| 1.3.6.1.4.1.21296.1.2.67.1.1.1.9 | ColumnmacsecEntityNegotiatedCipherSuite | read-only | current | Cipher suite used by this MACsec entity after the MKA negotiation. default value :not-applicable |
| 1.3.6.1.4.1.21296.1.2.67.1.1.1.10 | ColumnmacsecEntityReplayProtection | read-only | current | Replay protection enable/disable. default value :true |
| 1.3.6.1.4.1.21296.1.2.67.1.1.1.11 | ColumnmacsecEntityReplayProtectionWindow | read-only | current | Number of packets to consider for replay protection window. UNITS:packets default value :0 |
| 1.3.6.1.4.1.21296.1.2.67.1.1.1.12 | ColumnmacsecEntityLabel | read-only | current | The reply will be truncated in 128 bytes. User label. |
| 1.3.6.1.4.1.21296.1.2.67.2 | NodescTx | |||
| 1.3.6.1.4.1.21296.1.2.67.2.1 | TablescTxTable | not-accessible | current | Transmitting Secure Channel parameters. |
| 1.3.6.1.4.1.21296.1.2.67.2.1.1 | RowscTxEntry | not-accessible | current | Entry of scTxTable |
| 1.3.6.1.4.1.21296.1.2.67.2.1.1.1 | ColumnscTxIndex | read-only | current | Transmitting Secure Channel Index. |
| 1.3.6.1.4.1.21296.1.2.67.2.1.1.2 | ColumnscTxSciTx | read-only | current | Transmitting Secure Channel Identifier hex string. |
| 1.3.6.1.4.1.21296.1.2.67.2.1.1.3 | ColumnscTxState | read-only | current | State of the secure channel returned by MKA stack. |
| 1.3.6.1.4.1.21296.1.2.67.2.1.1.4 | ColumnscTxAssociationNumber | read-only | current | The association number (AN) for the SA. |
| 1.3.6.1.4.1.21296.1.2.67.2.1.1.5 | ColumnscTxKeyIdentifier | read-only | current | The key identifier (KI=MI+KN) for the SAK for the SA, MI(96MSB) is Member Identifier and KN(32LSB) is Key Number. |
| 1.3.6.1.4.1.21296.1.2.67.2.1.1.6 | ColumnscTxNextPacketNumber | read-only | current | The next packet number (PN) for the SA. |
| 1.3.6.1.4.1.21296.1.2.67.3 | NodescRx | |||
| 1.3.6.1.4.1.21296.1.2.67.3.1 | TablescRxTable | not-accessible | current | Receiving Secure Channel parameters. |
| 1.3.6.1.4.1.21296.1.2.67.3.1.1 | RowscRxEntry | not-accessible | current | Entry of scRxTable |
| 1.3.6.1.4.1.21296.1.2.67.3.1.1.1 | ColumnscRxIndex | read-only | current | Receiving Secure Channel Index. |
| 1.3.6.1.4.1.21296.1.2.67.3.1.1.2 | ColumnscRxSciRx | read-only | current | Receiving Secure Channel Identifier hex string. |
| 1.3.6.1.4.1.21296.1.2.67.3.1.1.3 | ColumnscRxState | read-only | current | State of the secure channel returned by MKA stack. |
| 1.3.6.1.4.1.21296.1.2.67.3.1.1.4 | ColumnscRxAssociationNumber | read-only | current | The association number (AN) for the SA. |
| 1.3.6.1.4.1.21296.1.2.67.3.1.1.5 | ColumnscRxKeyIdentifier | read-only | current | The key identifier (KI=MI+KN) for the SAK for the SA, MI(96MSB) is Member Identifier and KN(32LSB) is Key Number. |
| 1.3.6.1.4.1.21296.1.2.67.3.1.1.6 | ColumnscRxNextPacketNumber | read-only | current | The next packet number (PN) for the SA. |
| 1.3.6.1.4.1.21296.1.2.67.4 | NodemacsecMka | |||
| 1.3.6.1.4.1.21296.1.2.67.4.1 | TablemacsecMkaTable | not-accessible | current | Container for mka attributes used by the macsec entity. |
| 1.3.6.1.4.1.21296.1.2.67.4.1.1 | RowmacsecMkaEntry | not-accessible | current | Entry of macsecMkaTable |
| 1.3.6.1.4.1.21296.1.2.67.4.1.1.1 | ColumnmacsecMkaMkaPolicy | read-only | current | MKA policy name to use. |
| 1.3.6.1.4.1.21296.1.2.67.4.1.1.2 | ColumnmacsecMkaIsKeyServer | read-only | current | Identify if local end is key server. |
| 1.3.6.1.4.1.21296.1.2.67.4.1.1.4 | ColumnmacsecMkaConnectivityAssociationKey | read-only | current | Pre-shared Connectivity Association Key. |
| 1.3.6.1.4.1.21296.1.2.67.4.1.1.5 | ColumnmacsecMkaConnectivityAssociationKeyName | read-only | current | Pre-shared Connectivity Association Key Name. |
| 1.3.6.1.4.1.21296.1.2.67.4.1.1.6 | ColumnmacsecMkaPskConfiguredTimestamp | read-only | current | Local NE timestamp when the PSK was configured. |
| 1.3.6.1.4.1.21296.1.2.67.4.1.1.7 | ColumnmacsecMkaPskLifetime | read-only | current | Absolute time duration in days after which the PSK will expire. Conditions:../psk-lifetime-enable = 'true' UNITS:days default value :90 |
| 1.3.6.1.4.1.21296.1.2.67.4.1.1.8 | ColumnmacsecMkaPskExpirationWarning | read-only | current | An absolute time duration (in days) at which the NE provides a warning when the PSK is about to expire. Conditions:../psk-lifetime-enable = 'true' UNITS:days d… |
| 1.3.6.1.4.1.21296.1.2.67.4.1.1.9 | ColumnmacsecMkaPskLifetimeEnable | read-only | current | Indicates whether PSK lifetime notification is enabled or disabled. default value :true |
| 1.3.6.1.4.1.21296.1.2.67.4.1.1.10 | ColumnmacsecMkaAID | read-only | current | A system-generated AID for the MKA object. |
| 1.3.6.1.4.1.21296.1.2.67.4.1.1.11 | ColumnmacsecMkaAlarmReportControl | read-only | current | Controls the reporting of alarms for this particular object. default value :allowed |
| 1.3.6.1.4.1.21296.1.2.67.4.1.1.12 | ColumnmacsecMkaLabel | read-only | current | The reply will be truncated in 128 bytes. User label. |
| 1.3.6.1.4.1.21296.1.2.67.6 | NodemkaPolicy | |||
| 1.3.6.1.4.1.21296.1.2.67.6.1 | TablemkaPolicyTable | not-accessible | current | MACsec Key Agreement(MKA) policy referenced by the macsec entity related to ethernet facility. |
| 1.3.6.1.4.1.21296.1.2.67.6.1.1 | RowmkaPolicyEntry | not-accessible | current | Entry of mkaPolicyTable |
| 1.3.6.1.4.1.21296.1.2.67.6.1.1.1 | ColumnmkaPolicyName | read-only | current | Specify the name of mka policy. |
| 1.3.6.1.4.1.21296.1.2.67.6.1.1.2 | ColumnmkaPolicyKeyServerPriority | read-only | current | Key server priority used by MKA protocol to select key-server. default value :16 |
| 1.3.6.1.4.1.21296.1.2.67.6.1.1.3 | ColumnmkaPolicyMacsecCipherSuite | read-only | current | Cipher suites for Secure Association Key(SAK) derivation.This is originally a YANG leaf-list, here encoded as a comma separated list of values. |
| 1.3.6.1.4.1.21296.1.2.67.6.1.1.4 | ColumnmkaPolicyConfidentialityOffset | read-only | current | The confidentiality offset specifies a number of octets in an Ethernet frame that are sent in unencrypted plain-text. default value :0_BYTES |
| 1.3.6.1.4.1.21296.1.2.67.6.1.1.5 | ColumnmkaPolicySakRekeyInterval | read-only | current | Secure Association Key(SAK) rekey interval in seconds. UNITS:seconds default value :30 |
| 1.3.6.1.4.1.21296.1.2.68 | Nodevlan | |||
| 1.3.6.1.4.1.21296.1.2.68.1 | NodevlanInfo | |||
| 1.3.6.1.4.1.21296.1.2.68.1.1 | TablevlanTable | not-accessible | current | VLAN facility. |
| 1.3.6.1.4.1.21296.1.2.68.1.1.1 | RowvlanEntry | not-accessible | current | Entry of vlanTable |
| 1.3.6.1.4.1.21296.1.2.68.1.1.1.1 | ColumnvlanName | read-only | current | A generic, configurable name for every facility. |
| 1.3.6.1.4.1.21296.1.2.68.1.1.1.2 | ColumnvlanSupportingCard | read-only | current | Card that holds this facility |
| 1.3.6.1.4.1.21296.1.2.68.1.1.1.3 | ColumnvlanSupportingPort | read-only | current | Ports that hold this facilityThis is originally a YANG leaf-list, here encoded as a comma separated list of values. |
| 1.3.6.1.4.1.21296.1.2.68.1.1.1.4 | ColumnvlanSupportingFacilities | read-only | current | An XPath reference to the parent facilities.This is originally a YANG leaf-list, here encoded as a comma separated list of values. |
| 1.3.6.1.4.1.21296.1.2.68.1.1.1.5 | ColumnvlanSupportedFacilities | read-only | current | An XPath reference to the children facilities.This is originally a YANG leaf-list, here encoded as a comma separated list of values. |
| 1.3.6.1.4.1.21296.1.2.68.1.1.1.6 | ColumnvlanAID | read-only | current | Resource Access Identifier (AID). Identifies an instance within a specific resource type. |
| 1.3.6.1.4.1.21296.1.2.68.1.1.1.7 | ColumnvlanLabel | read-only | current | The reply will be truncated in 128 bytes. User label. |
| 1.3.6.1.4.1.21296.1.2.68.1.1.1.8 | ColumnvlanAdminState | read-only | current | The administrative state of the managed object. default value :unlock |
| 1.3.6.1.4.1.21296.1.2.68.1.1.1.9 | ColumnvlanOperState | read-only | current | The operational state of this object. default value :disabled |
| 1.3.6.1.4.1.21296.1.2.68.1.1.1.10 | ColumnvlanAvailState | read-only | current | Availability state of an entity. |
| 1.3.6.1.4.1.21296.1.2.68.1.1.1.11 | ColumnvlanManagedBy | read-only | current | Describes whether this managed entity was system created or not. Only user created entities can be user deleted. default value :user |
| 1.3.6.1.4.1.21296.1.2.68.1.1.1.12 | ColumnvlanAlarmReportControl | read-only | current | Controls the reporting of alarms for this particular object. default value :allowed |
| 1.3.6.1.4.1.21296.1.2.68.1.1.1.13 | ColumnvlanParent | read-only | current | Parent facility that this VLAN is associated with. |
| 1.3.6.1.4.1.21296.1.2.68.1.1.1.14 | ColumnvlanTagType | read-only | current | The VLAN tagging type. default value :single-tagged |
| 1.3.6.1.4.1.21296.1.2.68.1.1.1.15 | ColumnvlanId | read-only | current | VLAN id as per IEEE 802.1Q standard. |
| 1.3.6.1.4.1.21296.1.2.69 | Nodempls | |||
| 1.3.6.1.4.1.21296.1.2.69.1 | NodemplsInfo | |||
| 1.3.6.1.4.1.21296.1.2.69.1.1 | TablemplsTable | not-accessible | current | MPLS facility. |
| 1.3.6.1.4.1.21296.1.2.69.1.1.1 | RowmplsEntry | not-accessible | current | Entry of mplsTable |
| 1.3.6.1.4.1.21296.1.2.69.1.1.1.1 | ColumnmplsName | read-only | current | A generic, configurable name for every facility. |
| 1.3.6.1.4.1.21296.1.2.69.1.1.1.2 | ColumnmplsSupportingCard | read-only | current | Card that holds this facility |
| 1.3.6.1.4.1.21296.1.2.69.1.1.1.3 | ColumnmplsSupportingPort | read-only | current | Ports that hold this facilityThis is originally a YANG leaf-list, here encoded as a comma separated list of values. |
| 1.3.6.1.4.1.21296.1.2.69.1.1.1.4 | ColumnmplsSupportingFacilities | read-only | current | An XPath reference to the parent facilities.This is originally a YANG leaf-list, here encoded as a comma separated list of values. |
| 1.3.6.1.4.1.21296.1.2.69.1.1.1.5 | ColumnmplsSupportedFacilities | read-only | current | An XPath reference to the children facilities.This is originally a YANG leaf-list, here encoded as a comma separated list of values. |
| 1.3.6.1.4.1.21296.1.2.69.1.1.1.6 | ColumnmplsAID | read-only | current | Resource Access Identifier (AID). Identifies an instance within a specific resource type. |
| 1.3.6.1.4.1.21296.1.2.69.1.1.1.7 | ColumnmplsLabel | read-only | current | The reply will be truncated in 128 bytes. User label. |
| 1.3.6.1.4.1.21296.1.2.69.1.1.1.8 | ColumnmplsAdminState | read-only | current | The administrative state of the managed object. default value :unlock |
| 1.3.6.1.4.1.21296.1.2.69.1.1.1.9 | ColumnmplsOperState | read-only | current | The operational state of this object. default value :disabled |
| 1.3.6.1.4.1.21296.1.2.69.1.1.1.10 | ColumnmplsAvailState | read-only | current | Availability state of an entity. |
| 1.3.6.1.4.1.21296.1.2.69.1.1.1.11 | ColumnmplsManagedBy | read-only | current | Describes whether this managed entity was system created or not. Only user created entities can be user deleted. default value :user |
| 1.3.6.1.4.1.21296.1.2.69.1.1.1.12 | ColumnmplsAlarmReportControl | read-only | current | Controls the reporting of alarms for this particular object. default value :allowed |
| 1.3.6.1.4.1.21296.1.2.69.1.1.1.13 | ColumnmplsOutIf | read-only | current | Output interface for MPLS facility. |
| 1.3.6.1.4.1.21296.1.2.69.1.1.1.14 | ColumnmplsType | read-only | current | MPLS facility type. default value :pseudowire |
| 1.3.6.1.4.1.21296.1.2.69.1.1.1.15 | ColumnmplsTtl | read-only | current | Time-to-live value for MPLS packets. default value :255 |
| 1.3.6.1.4.1.21296.1.2.69.1.1.1.16 | ColumnmplsClassOfService | read-only | current | Class of service for MPLS packets. default value :ef-expedited-forwarding |
| 1.3.6.1.4.1.21296.1.2.69.1.1.1.17 | ColumnmplsIncomingPwLabel | read-only | current | Incoming pseudowire label. |
| 1.3.6.1.4.1.21296.1.2.69.1.1.1.18 | ColumnmplsOutgoingPwLabel | read-only | current | Outgoing pseudowire label. |
| 1.3.6.1.4.1.21296.1.2.69.1.1.1.19 | ColumnmplsMacNexthopAddr | read-only | current | MAC address of the next hop for MPLS packets. default value :00:00:00:00:00:00 |
| 1.3.6.1.4.1.21296.1.2.69.1.1.1.20 | ColumnmplsRxControlWordFlags | read-only | current | Received pseudowire control word flags bits. |
| 1.3.6.1.4.1.21296.1.2.69.1.1.1.21 | ColumnmplsPwCacL1Bandwidth | read-only | current | Pseudowire CAC (Connection Admission Control) Layer 1 bandwidth. |
| 1.3.6.1.4.1.21296.1.2.69.1.1.1.22 | ColumnmplsCircuitId | read-only | current | System configured circuit ID, present in XCONs and associated facilities. For facilities, circuit-id is only filled in if an associated XCON exists. Format of … |
| 1.3.6.1.4.1.21296.1.2.70 | Nodepleiw | |||
| 1.3.6.1.4.1.21296.1.2.70.1 | NodepleiwInfo | |||
| 1.3.6.1.4.1.21296.1.2.70.1.1 | TablepleiwTable | not-accessible | current | PLEIW facility. |
| 1.3.6.1.4.1.21296.1.2.70.1.1.1 | RowpleiwEntry | not-accessible | current | Entry of pleiwTable |
| 1.3.6.1.4.1.21296.1.2.70.1.1.1.1 | ColumnpleiwName | read-only | current | A generic, configurable name for every facility. |
| 1.3.6.1.4.1.21296.1.2.70.1.1.1.2 | ColumnpleiwSupportingCard | read-only | current | Card that holds this facility |
| 1.3.6.1.4.1.21296.1.2.70.1.1.1.3 | ColumnpleiwSupportingPort | read-only | current | Ports that hold this facilityThis is originally a YANG leaf-list, here encoded as a comma separated list of values. |
| 1.3.6.1.4.1.21296.1.2.70.1.1.1.4 | ColumnpleiwSupportingFacilities | read-only | current | An XPath reference to the parent facilities.This is originally a YANG leaf-list, here encoded as a comma separated list of values. |
| 1.3.6.1.4.1.21296.1.2.70.1.1.1.5 | ColumnpleiwSupportedFacilities | read-only | current | An XPath reference to the children facilities.This is originally a YANG leaf-list, here encoded as a comma separated list of values. |
| 1.3.6.1.4.1.21296.1.2.70.1.1.1.6 | ColumnpleiwAID | read-only | current | Resource Access Identifier (AID). Identifies an instance within a specific resource type. |
| 1.3.6.1.4.1.21296.1.2.70.1.1.1.7 | ColumnpleiwLabel | read-only | current | The reply will be truncated in 128 bytes. User label. |
| 1.3.6.1.4.1.21296.1.2.70.1.1.1.8 | ColumnpleiwAdminState | read-only | current | The administrative state of the managed object. default value :unlock |
| 1.3.6.1.4.1.21296.1.2.70.1.1.1.9 | ColumnpleiwOperState | read-only | current | The operational state of this object. default value :disabled |
| 1.3.6.1.4.1.21296.1.2.70.1.1.1.10 | ColumnpleiwAvailState | read-only | current | Availability state of an entity. |
| 1.3.6.1.4.1.21296.1.2.70.1.1.1.11 | ColumnpleiwManagedBy | read-only | current | Describes whether this managed entity was system created or not. Only user created entities can be user deleted. default value :user |
| 1.3.6.1.4.1.21296.1.2.70.1.1.1.12 | ColumnpleiwAlarmReportControl | read-only | current | Controls the reporting of alarms for this particular object. default value :allowed |
| 1.3.6.1.4.1.21296.1.2.70.1.1.1.13 | ColumnpleiwPrimaryPw | read-only | current | Primary pseudowire reference. |
| 1.3.6.1.4.1.21296.1.2.70.1.1.1.14 | ColumnpleiwType | read-only | current | PLEIW facility type. default value :static |
| 1.3.6.1.4.1.21296.1.2.70.1.1.1.15 | ColumnpleiwBitRate | read-only | current | Bit rate in kilobits per second. UNITS:kbps |
| 1.3.6.1.4.1.21296.1.2.70.1.1.1.16 | ColumnpleiwDejitterBufferSize | read-only | current | Dejitter buffer size in microseconds. UNITS:us default value :360 |
| 1.3.6.1.4.1.21296.1.2.70.1.1.1.17 | ColumnpleiwDejitterBufferInitfill | read-only | current | Dejitter buffer initial fill level in microseconds or as a percentage. UNITS:us default value :50% |
| 1.3.6.1.4.1.21296.1.2.70.1.1.1.18 | ColumnpleiwDejitterBufferLowWatermark | read-only | current | Dejitter buffer low watermark in microseconds or as a percentage. UNITS:us default value :25% |
| 1.3.6.1.4.1.21296.1.2.70.1.1.1.19 | ColumnpleiwDejitterBufferHighWatermark | read-only | current | Dejitter buffer high watermark in microseconds or as a percentage. UNITS:us default value :75% |
| 1.3.6.1.4.1.21296.1.2.70.1.1.1.20 | ColumnpleiwWatermarkAdjustmentPeriod | read-only | current | Watermark adjustment period in parts per billion. UNITS:ppb default value :1000 |
| 1.3.6.1.4.1.21296.1.2.70.1.1.1.21 | ColumnpleiwWatermarkAction | read-only | current | Action to take when watermark threshold is reached. default value :alarm |
| 1.3.6.1.4.1.21296.1.2.70.1.1.1.22 | ColumnpleiwSequenceLossLimit | read-only | current | Sequence loss limit threshold. default value :100 |
| 1.3.6.1.4.1.21296.1.2.70.1.1.1.23 | ColumnpleiwCircuitId | read-only | current | System configured circuit ID, present in XCONs and associated facilities. For facilities, circuit-id is only filled in if an associated XCON exists. Format of … |
| 1.3.6.1.5.1 | NodesecurityInfo | |||
| 1.3.6.1.5.1.1 | ScalarsecurityAlarmReportControl | read-only | current | Controls the reporting of alarms for this particular object. default value :allowed |
| 1.3.6.1.5.2 | NodesecurityPolicies | |||
| 1.3.6.1.5.2.1 | ScalarsecurityPoliciesSecureMode | read-only | current | If enabled, non-secure protocols are not supported. If disabled, non-secure protocols can be used, including: - HTTP protocol for file transfer, REST API, or a… |
| 1.3.6.1.5.2.2 | ScalarsecurityPoliciesStrictPasswordCheck | read-only | current | If enabled, ensures the strict password complexity rules. Including: - minimum length of 8 characters (by default, configurable via the minimum-password-length… |
| 1.3.6.1.5.2.3 | ScalarsecurityPoliciesDefaultUserGroup | read-only | current | Default roles for users access.This is originally a YANG leaf-list, here encoded as a comma separated list of values. |
| 1.3.6.1.5.2.4 | ScalarsecurityPoliciesEnforcePasswordHistoryCheck | read-only | current | When true, a user's newly created password must not match any of their previous N passwords, where N is set by the password-history-size attribute. Only passwo… |
| 1.3.6.1.5.2.5 | ScalarsecurityPoliciesAaaAuthenticationMethod | read-only | current | Specify authentication method for the user login to the NE. default value :local-only |
| 1.3.6.1.5.2.6 | ScalarsecurityPoliciesAaaAuthorizationMethod | read-only | current | Specify authorization policy for the logged user. If the user changes this parameter, it should logout and login again to apply the rules. default value :local… |
| 1.3.6.1.5.2.7 | ScalarsecurityPoliciesSshStrictHostKeyChecking | read-only | current | Specify the strictness of remote ssh/sftp/scp host identity checking. default value :relaxed |
| 1.3.6.1.5.2.8 | ScalarsecurityPoliciesRootPassword | read-only | current | The password of the root user. Note: this attribute is obsolete and has no impact in the system - this is kept for temporary backward compatibility. |
| 1.3.6.1.5.2.9 | ScalarsecurityPoliciesConsoleUserPassword | read-only | current | The password of the console-user. Can be provided as an alternative to the console-user-password-hashed. |
| 1.3.6.1.5.2.10 | ScalarsecurityPoliciesCspSymmetricalKey | read-only | current | Critical Security Parameters symmetrical key. |
| 1.3.6.1.5.2.11 | ScalarsecurityPoliciesMaxSystemSessions | read-only | current | The maximum number of management sessions that the system supports. Note: session via serial console does not count against this maximum. |
| 1.3.6.1.5.2.12 | ScalarsecurityPoliciesMaxLocalUsers | read-only | current | The maximum number of local users that can be configured in the system. |
| 1.3.6.1.5.2.13 | ScalarsecurityPoliciesDbPassphrase | read-only | current | Passphrase used for encrypting and decrypting DB snapshots. For each command associated with DB snapshots (backup, restore, etc), this db-passphrase will be us… |
| 1.3.6.1.5.2.14 | ScalarsecurityPoliciesSshAuthenticationMethod | read-only | current | The method used to authenticate user for SSH access. Note: For two-factor authentication, use public-key method and employ PIN/password-protected hardware devi… |
| 1.3.6.1.5.2.15 | ScalarsecurityPoliciesSshCiphers | read-only | current | Allowed symmetric ciphers for SSH.This is originally a YANG leaf-list, here encoded as a comma separated list of values. |
| 1.3.6.1.5.2.16 | ScalarsecurityPoliciesSshMacs | read-only | current | Allowed message authentication code algorithms for SSH.This is originally a YANG leaf-list, here encoded as a comma separated list of values. |
| 1.3.6.1.5.2.17 | ScalarsecurityPoliciesSshKeyExchanges | read-only | current | Allowed key exchange algorithms for SSH.This is originally a YANG leaf-list, here encoded as a comma separated list of values. |
| 1.3.6.1.5.2.18 | ScalarsecurityPoliciesSshHostKeyAlgorithms | read-only | current | Allowed host key algorithms for SSH.This is originally a YANG leaf-list, here encoded as a comma separated list of values. |
| 1.3.6.1.5.2.19 | ScalarsecurityPoliciesSshPublicKeyAlgorithms | read-only | current | Allowed public key algorithms for SSH.This is originally a YANG leaf-list, here encoded as a comma separated list of values. |
| 1.3.6.1.5.2.20 | ScalarsecurityPoliciesMinimumPasswordLength | read-only | current | Configurable minimum length for user passwords. When a password is changed, the password length will be verified according with this policy. Note that changing… |
| 1.3.6.1.5.2.21 | ScalarsecurityPoliciesConsoleUserEnabled | read-only | current | A switch to enable/disable console-user. The console-user account is an emergency account that is only usable through the serial console. Disabling this accoun… |
| 1.3.6.1.5.2.22 | ScalarsecurityPoliciesDisableUserLockout | read-only | current | This policy allows to enable/disable user lockout when multiple invalid logins are detected. The number of invalid logins that trigger the lockout is configura… |
| 1.3.6.1.5.2.23 | ScalarsecurityPoliciesSupportedTlsVersion | read-only | current | Transport Layer Security (TLS) supported version(s). Changing this attribute will only affect new connections. default value :1.2-only |
| 1.3.6.1.5.2.24 | ScalarsecurityPoliciesTls12CipherSuites | read-only | current | Supported TLS 1.2 cipher suites. Changing this attribute will only affect new connections.This is originally a YANG leaf-list, here encoded as a comma separate… |
| 1.3.6.1.5.2.25 | ScalarsecurityPoliciesTls13CipherSuites | read-only | current | Supported TLS 1.3 cipher suites. Changing this attribute will only affect new connections. TLS_CHACHA20_POLY1305_SHA256 note: If present and requested by the c… |
| 1.3.6.1.5.2.26 | ScalarsecurityPoliciesTlsCurves | read-only | current | Supported elliptic curve, post-quantum, and hybrid key exchange groups for TLS key exchange. The tls-curves algorithms affect both key-exchange and authenticat… |
| 1.3.6.1.5.2.28 | ScalarsecurityPoliciesCrlBasedRevocation | read-only | current | This policy allows to enable/disable CRL-based certificate revocation. default value :false |
| 1.3.6.1.5.2.29 | ScalarsecurityPoliciesCrlDownloadTimeout | read-only | current | Specifies the maximum time to wait (in seconds) for automatic CRL downloads. Note: This timeout does not apply to manual CRL downloads. UNITS:seconds default v… |
| 1.3.6.1.5.2.30 | ScalarsecurityPoliciesOcspBasedRevocation | read-only | current | This policy defines whether OCSP responders can be consulted for certificate revocation checking. default value :false |
| 1.3.6.1.5.2.31 | ScalarsecurityPoliciesPasswordHistorySize | read-only | current | The number of passwords to store for password reuse checking. default value :5 |
| 1.3.6.1.5.2.32 | ScalarsecurityPoliciesSshKeyAgingInterval | read-only | current | This policy defines the ssh-authorized-keys aging interval. Setting the value to 0 disables ssh-authorized-keys aging. This affects the expiration date of all … |
| 1.3.6.1.5.2.33 | ScalarsecurityPoliciesSupportedSignatureHashAlgorithms | read-only | current | Supported hash algorithms for digital signatures for certificates. This applies to locally-managed certificates as well as certificates received from a remote … |
| 1.3.6.1.5.2.34 | ScalarsecurityPoliciesConsoleUserPasswordHashed | read-only | current | Hashed password of the console-user. Can be provided as an alternative to the plaintext console-user-password field. It is made of three mandatory fields, wher… |
| 1.3.6.1.5.2.35 | ScalarsecurityPoliciesCspRetrievalEncoding | read-only | current | Support to retrieve CSPs in the given encoding. default value :disabled |
| 1.3.6.1.5.2.36 | ScalarsecurityPoliciesMtlsAuthenticationMethod | read-only | current | The method used to authenticate user for access to TLS-based applications. This applies only to secure-applications configured for mTLS operation (verify-clien… |
| 1.3.6.1.5.2.37 | ScalarsecurityPoliciesCertExpiringWarning | read-only | current | Threshold for raising CERTIFICATE-EXPIRING alarm, expressed as days before expiration or as a percentage of the certificate lifetime ('not after date' - 'not b… |
| 1.3.6.1.5.3 | NodeuserGroup | |||
| 1.3.6.1.5.3.1 | TableuserGroupTable | not-accessible | current | List of user groups, each one with its own access permissions. Each user will be associated with a list of groups, and will derive its permissions from them. |
| 1.3.6.1.5.3.1.1 | RowuserGroupEntry | not-accessible | current | Entry of userGroupTable |
| 1.3.6.1.5.3.1.1.1 | ColumnuserGroupName | read-only | current | Name of the group. |
| 1.3.6.1.5.3.1.1.2 | ColumnuserGroupDescription | read-only | current | Long description of the user group. |
| 1.3.6.1.5.4 | NodeaaaServer | |||
| 1.3.6.1.5.4.1 | TableaaaServerTable | not-accessible | current | Configuration of AAA servers - RADIUS or TACACS+. |
| 1.3.6.1.5.4.1.1 | RowaaaServerEntry | not-accessible | current | Entry of aaaServerTable |
| 1.3.6.1.5.4.1.1.1 | ColumnaaaServerServerName | read-only | current | specify the name of aaa server. |
| 1.3.6.1.5.4.1.1.2 | ColumnaaaServerServerPriority | read-only | current | This is used to sort the servers in the order of precedence. If not provided, the priority will be set to the lowest precedence (highest number) already existi… |
| 1.3.6.1.5.4.1.1.3 | ColumnaaaServerProtocolSupported | read-only | current | specify the protocol used for AAA. |
| 1.3.6.1.5.4.1.1.4 | ColumnaaaServerServerAddress | read-only | current | The IP address of AAA server. |
| 1.3.6.1.5.4.1.1.5 | ColumnaaaServerServerPort | read-only | current | AAA server port number. Default value will depend on protocol: 49 for TACACS, 2083 for RADIUS/TLS. Not applicable for RADIUS/UDP. |
| 1.3.6.1.5.4.1.1.6 | ColumnaaaServerServerPortAuthentication | read-only | current | AAA server authentication port number. Only of relevance for protocol-supported RADIUS. default value :1812 |
| 1.3.6.1.5.4.1.1.7 | ColumnaaaServerServerPortAccounting | read-only | current | AAA server accounting port number. Only of relevance for protocol-supported RADIUS. default value :1813 |
| 1.3.6.1.5.4.1.1.8 | ColumnaaaServerSharedSecret | read-only | current | The shared secret of the aaa server. The shared secret will be displayed as *. default value :sharedkey |
| 1.3.6.1.5.4.1.1.9 | ColumnaaaServerRoleSupported | read-only | current | The configured roles for the AAA server. default value :authentication authorization accounting |
| 1.3.6.1.5.4.1.1.10 | ColumnaaaServerEnabled | read-only | current | Enable switch for this aaa-server. default value :true |
| 1.3.6.1.5.4.1.1.11 | ColumnaaaServerTimeout | read-only | current | Specifies the response timeout of Access-Request messages sent to a AAA server in seconds. UNITS:seconds default value :5 |
| 1.3.6.1.5.4.1.1.12 | ColumnaaaServerRetry | read-only | current | Specifies the number of attempted Access-Request messages to a single AAA server before failing authentication. default value :3 |
| 1.3.6.1.5.4.1.1.13 | ColumnaaaServerSourceIp | read-only | current | Source IP address used for RADIUS communications. Only of relevance for protocol-supported RADIUS. default value :auto |
| 1.3.6.1.5.4.1.1.14 | ColumnaaaServerCommonPassword | read-only | current | Password used for RADIUS authorization after SSH public key authentication. If blank, username is reused as password for RADIUS authorization. Only of relevanc… |
| 1.3.6.1.5.4.1.1.16 | ColumnaaaServerAuthProtocol | read-only | current | The list of supported authentication protocols to use. If more than one is selected, system will try one at a time in a best-effort way using the following pri… |
| 1.3.6.1.5.4.1.1.17 | ColumnaaaServerOperState | read-only | current | The operational state of this object. default value :disabled |
| 1.3.6.1.5.4.1.1.18 | ColumnaaaServerRadiusOptions | read-only | current | Extra configuration options for each radius server. |
| 1.3.6.1.5.4.1.1.19 | ColumnaaaServerTransport | read-only | current | The transport protocol used for AAA server communication. |
| 1.3.6.1.5.6 | Nodeauthorization | |||
| 1.3.6.1.5.6.1 | ScalarauthorizationMode | read-only | current | System global authorization mode - selects which kind of authorization rules are used. default value :static+rules |
| 1.3.6.1.5.6.2 | ScalarauthorizationReadDefault | read-only | current | In case only user configured access-rules are used, this policy defines what is the action to use if a given read operation does not match any rule. Read acces… |
| 1.3.6.1.5.6.3 | ScalarauthorizationWriteDefault | read-only | current | In case only user configured access-rules are used, this policy defines what is the action to use if a given write operation does not match any rule. Write acc… |
| 1.3.6.1.5.6.4 | ScalarauthorizationExecDefault | read-only | current | In case only user configured access-rules are used, this policy defines what is the action to use if a given exec operation does not match any rule. Exec acces… |
| 1.3.6.1.5.6.5 | ScalarauthorizationDeniedOperations | read-only | current | Number of times since the system last restarted that an Exec request was denied. |
| 1.3.6.1.5.6.6 | ScalarauthorizationDeniedDataWrites | read-only | current | Number of times since the system last restarted that a Write operation request was denied. |
| 1.3.6.1.5.6.7 | ScalarauthorizationDeniedNotifications | read-only | current | Number of times since the system last restarted that that a notification was dropped for a subscription because access to the event type was denied. |
| 1.3.6.1.5.7 | NodeaccessRuleList | |||
| 1.3.6.1.5.7.1 | TableaccessRuleListTable | not-accessible | current | Group of access-rules, organized by which user-groups the rules apply to. Access-rule-list are processed in order, as given by the sequence-id parameter. |
| 1.3.6.1.5.7.1.1 | RowaccessRuleListEntry | not-accessible | current | Entry of accessRuleListTable |
| 1.3.6.1.5.7.1.1.1 | ColumnaccessRuleListName | read-only | current | The name of the access-rule-list. |
| 1.3.6.1.5.7.1.1.2 | ColumnaccessRuleListUserGroup | read-only | current | List of user-groups that this access-rule-list applies to. The default value '*' is used as a match-all representation, meaning this access-rule-list applies t… |
| 1.3.6.1.5.7.1.1.3 | ColumnaccessRuleListSequenceId | read-only | current | The id of this access-rule-lists, used for processing all lists. Lower number ids are processed first. Id can change over the lifetime of the access-rule-list … |
| 1.3.6.1.5.7.1.1.4 | ColumnaccessRuleListDescription | read-only | current | The reply will be truncated in 128 bytes. A generic description of this access-rule-list. |
| 1.3.6.1.5.8 | NodeaccessRule | |||
| 1.3.6.1.5.8.1 | TableaccessRuleTable | not-accessible | current | Represents a single access-rule, defining access to a particular target path. The rule can also consider multiple filters, including: - just a particular path … |
| 1.3.6.1.5.8.1.1 | RowaccessRuleEntry | not-accessible | current | Entry of accessRuleTable |
| 1.3.6.1.5.8.1.1.1 | ColumnaccessRuleName | read-only | current | The name of the access-rule-list. |
| 1.3.6.1.5.8.1.1.2 | ColumnaccessRuleSequenceId | read-only | current | The id of this access-rule within the current list, used for processing all rules. Lower number ids are processed first. Id can change over the lifetime of the… |
| 1.3.6.1.5.8.1.1.3 | ColumnaccessRuleModuleName | read-only | current | YANG Module to consider when considering this rule; needs to match an available data-model file. By default value '*' is used to represent 'any module name'. N… |
| 1.3.6.1.5.8.1.1.4 | ColumnaccessRulePath | read-only | current | The reply will be truncated in 128 bytes. The target object of the access rule. May be: - XPath of a YANG data node - XPath of a YANG notification - XPath of a… |
| 1.3.6.1.5.8.1.1.5 | ColumnaccessRuleAttribute | read-only | current | Attribute name to which this rule applies to. If not provided, the rule will apply to all attributes in the provided path. If multiple attributes are specified… |
| 1.3.6.1.5.8.1.1.6 | ColumnaccessRuleAttributeValue | read-only | current | Attribute value to which this rule applies to. If not provided, it means the rule applies independently on the attribute value. Can only be provided if a singl… |
| 1.3.6.1.5.8.1.1.7 | ColumnaccessRuleOperation | read-only | current | The list of operations that the rule applies to. The '*' value represents all operations, and is the default value. |
| 1.3.6.1.5.8.1.1.8 | ColumnaccessRuleAction | read-only | current | The permit/deny action associated with this rule. This field needs to be provided whenever an access rule is created. |
| 1.3.6.1.5.8.1.1.9 | ColumnaccessRuleDescription | read-only | current | The reply will be truncated in 128 bytes. A user-configurable description about this access rule. |
| 1.3.6.1.5.9 | Nodeniap | |||
| 1.3.6.1.5.9.1 | ScalarniapExpectedNiapCompliance | read-only | current | The user configurable expected NIAP compliance status. If set to true and the actual niap-compliance is false, the NIAP-COMPLIANCE-MISMATCH alarm will be raise… |
| 1.3.6.1.5.9.2 | ScalarniapCompliance | read-only | current | The current system NIAP compliance status. |
| 1.3.6.1.5.9.3 | ScalarniapNonComplianceReason | read-only | current | Provides the first 10 reasons why the system is not NIAP compliant. List is empty if system is NIAP compliant.This is originally a YANG leaf-list, here encoded… |
| 1.3.6.1.5.10 | NodedbProtectionScheme | |||
| 1.3.6.1.5.10.1 | ScalardbProtectionSchemeEncryptionAlgorithm | read-only | current | Encryption algorithm used for database encryption. |
| 1.3.6.1.5.10.2 | ScalardbProtectionSchemeIntegrityAlgorithm | read-only | current | Type of integrity algorithm used for DB. |
| 1.3.6.1.5.10.3 | ScalardbProtectionSchemeIntegrityStatus | read-only | current | Status of integrity check. |
| 1.3.6.1.5.10.4 | ScalardbProtectionSchemeMode | read-only | current | Current Protection Scheme of DB. Can be changed via 'db-migrate' RPC. |
| 1.3.6.1.5.11 | NodeestCa | |||
| 1.3.6.1.5.11.1 | TableestCaTable | not-accessible | current | Represents a Certificate Authority (CA) which is set for Enrollment over Secure Transport (EST). |
| 1.3.6.1.5.11.1.1 | RowestCaEntry | not-accessible | current | Entry of estCaTable |
| 1.3.6.1.5.11.1.1.1 | ColumnestCaName | read-only | current | Name of Certificate Authority (CA) which is set for Enrollment over Secure Transport (EST). |
| 1.3.6.1.5.11.1.1.2 | ColumnestCaExplicitCaRoot | read-only | current | Indicates the trusted root certificate for this EST CA. default value :none |
| 1.3.6.1.5.11.1.1.3 | ColumnestCaRootFingerprint | read-only | current | The cryptographic SHA-256 or SHA-512 fingerprint of the trusted Root CA certificate, used to securely bootstrap EST certificate enrollment. The fingerprint can… |
| 1.3.6.1.5.11.1.1.4 | ColumnestCaLabel | read-only | current | The reply will be truncated in 128 bytes. User label. |
| 1.3.6.1.5.11.1.1.5 | ColumnestCaAutoReEnrollment | read-only | current | The number of days before expiration at which re-enrollment will be performed for all leaf certificates issued by this EST CA. This number can also be specifie… |
| 1.3.6.1.5.12 | NodeestServer | |||
| 1.3.6.1.5.12.1 | TableestServerTable | not-accessible | current | Configuration of Enrollment over Secure Transport (EST) servers. |
| 1.3.6.1.5.12.1.1 | RowestServerEntry | not-accessible | current | Entry of estServerTable |
| 1.3.6.1.5.12.1.1.1 | ColumnestServerServerName | read-only | current | Specify the name of EST server. |
| 1.3.6.1.5.12.1.1.2 | ColumnestServerServerAddress | read-only | current | The IP address of EST server. |
| 1.3.6.1.5.12.1.1.3 | ColumnestServerServerPort | read-only | current | EST server port number. default value :443 |
| 1.3.6.1.5.12.1.1.4 | ColumnestServerPriority | read-only | current | This is used to sort the servers in order of precedence. If not provided, the priority will be set to the lowest precedence (highest number) already existing i… |
| 1.3.6.1.5.12.1.1.5 | ColumnestServerEnabled | read-only | current | Enable switch for the EST server. default value :true |
| 1.3.6.1.5.12.1.1.6 | ColumnestServerPathSegment | read-only | current | Optional label added to the EST base URL. Example: 'arbitraryLabel1' would result in a full URIs such as 'https://www.example.com/.well-known/est/arbitraryLabe… |
| 1.3.6.1.5.13 | NodeaaaStatistics | |||
| 1.3.6.1.5.13.1 | TableaaaStatisticsTable | not-accessible | current | Set of relevant statistic values for AAA operations. Please note that these values are not persistent. |
| 1.3.6.1.5.13.1.1 | RowaaaStatisticsEntry | not-accessible | current | Entry of aaaStatisticsTable |
| 1.3.6.1.5.13.1.1.1 | ColumnaaaStatisticsConnectionFailures | read-only | current | Registers the number of connection failures. Includes failures due to unavailable servers and timeouts. |
| 1.3.6.1.5.13.1.1.2 | ColumnaaaStatisticsAuthenticationRequests | read-only | current | Registers the number of authentication requests. |
| 1.3.6.1.5.13.1.1.3 | ColumnaaaStatisticsAuthenticationRejects | read-only | current | Registers the number of authentication rejects. |
| 1.3.6.1.5.13.1.1.4 | ColumnaaaStatisticsAuthorizationRequests | read-only | current | Registers the number of authorization requests. |
| 1.3.6.1.5.13.1.1.5 | ColumnaaaStatisticsAuthorizationRejects | read-only | current | Registers the number of authorization rejects. |
| 1.3.6.1.5.13.1.1.6 | ColumnaaaStatisticsAccountingRequests | read-only | current | Registers the number of accounting requests. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| IoaAclAclIpPrefix | OCTET STRING | current | A re-usable type that is used to match both source and destination fields of an IP packet in an ACL. |
| IoaAlarmAlarmCategory | INTEGER { communication (1), facility (2), equipment (3), environmental (4), processingError (5), software (6), qualityOfService (7), security (8) } | current | Category of the alarm type. |
| IoaAlarmDirection | INTEGER { na (0), ingress (1), egress (2) } | current | Direction related with the alarm. |
| IoaAlarmLocation | INTEGER { na (0), nearEnd (1), farEnd (2) } | current | Location of the alarm. |
| IoaAlarmOperatorState | INTEGER { none (1), ack (2), closed (3) } | current | Possible operator states for alarms. |
| IoaAlarmServiceAffecting | INTEGER { indeterminate (0), sa (1), nsa (2), saNsa (3) } | current | Possible alarm service affecting category |
| IoaAlarmSeverity | INTEGER { indeterminate (0), critical (1), major (2), minor (3), warning (4), notReported (5), event (6), cleared (7) } | current | Possible alarm severities, with 'clear'. |
| IoaAlarmUserSeverity | INTEGER { critical (1), major (2), minor (3), warning (4), notReported (5), event (6) } | current | Possible alarm severities configurable by the user. |
| IoaAmpDgeModeType | INTEGER { none (0), dgeMode (1) } | current | NULL |
| IoaAmpGainAdjustableValue | OCTET STRING | current | The adjustable gain value at the EDFA/Raman. UNITS:dB |
| IoaAmpGainRangeType | INTEGER { standard (1), low (2), high (3) } | current | Type of gain-range. |
| IoaAmpGainValue | OCTET STRING | current | A type representing an amplifier gain. 0 dB means no gain (e.g. amplifier not in operation) UNITS:dB |
| IoaCarrierTypesApplicationIdType | OCTET STRING (SIZE (1..15)) | current | Appication ID is a string. |
| IoaCertificateAllowedKeyLengths | INTEGER { rsa2048 (1), rsa3072 (2), rsa4096 (3), ecdsa256 (4), ecdsa384 (5), ecdsa521 (6), ecdsa128 (7), ed25519 (8) } | current | Public/private key length(only for allowed key types). |
| IoaCertificateCertSubjectName | OCTET STRING (SIZE (1..1024)) | current | A custom type to represent X.500 distinguished names (DN). |
| IoaCertificateCsrMetadataTemplateType | INTEGER { fromExistingCertificate (1), fromOpensslCnf (2), generic (3), genericTlsServer (4), genericTlsClient (5), genericIkev2Identity (6) } | current | Source of default certificate metadata for CSR generation. |
| IoaCertificateExtendedKeyUsageType | INTEGER { serverauth (1), clientauth (2), codesigning (3), emailprotection (4), timestamping (5), ocspsigning (6) } | current | This extension consists of a list of values indicating purposes for which the certificate public key can be used. |
| IoaCertificateKeyAlgorithmType | INTEGER { rsa4096 (1), rsa3072 (2), rsa2048 (3), eccp256 (5), eccp384 (6), eccp521 (7), ed25519 (8) } | current | Cryptographic algorithm and size for asymmetric key pair generation. |
| IoaCertificateKeyUsageType | INTEGER { digitalsignature (1), nonrepudiation (2), keyencipherment (3), dataencipherment (4), keyagreement (5), keycertsign (6), crlsign (7), encipheronly (8), decipheronly (9) } | current | Key usage is a multi-valued extension consisting of a list of names of the permitted key usages. |
| IoaCertificatePublicKeyTypes | INTEGER { rsa (1), ecdsa (2), ed25519 (3), ed25519Sk (4) } | current | Public/private key type for X509v3 certificate and SSHv2 host key. |
| IoaCertificateSignatureHashAlgorithmType | INTEGER { sha256 (1), sha384 (2), sha512 (3), sha1 (4) } | current | Hash algorithms used for digital signatures for certificates/CRLs. |
| IoaCommonCertificateName | OCTET STRING (SIZE (1..128)) | current | A custom type for certificate name. |
| IoaCommonClientModeType | INTEGER { ethernet (10), ethernetOtn (20), otn (30), unknown (40) } | current | This indicates the digital client mode of the signal that is mapped into, and transported by, the carriers. |
| IoaCommonCspSalt | Unsigned32 | current | Represents the salt of a csp. Default 255 represents 'unset'. |
| IoaCommonDateTimeNa | OCTET STRING | current | Typedef for a timestamp 'date+time' or the keyword 'na'. |
| IoaCommonDateTimeNever | OCTET STRING | current | Typedef for a timestamp 'date+time' or the keyword 'never'. |
| IoaCommonDateTimeOrTimeOnly | OCTET STRING | current | Typedef for a timestamp 'date+time' or 'time' only. |
| IoaCommonDateTimeOrTimeOnlyOrNever | OCTET STRING | current | Typedef for a timestamp 'date+time' or 'time' only or the keyword 'never'. |
| IoaCommonDbPassphrase | OCTET STRING | current | Generic type definition for a db-passphrase attribute. |
| IoaCommonDecimalList | OCTET STRING (SIZE (0..500)) | current | List of numbers using ',' as separator and '..' to represent ranges. Examples: '1.2' , '1.1..1.4' , '1.1,1.5,1.10..1..12,1..20' |
| IoaCommonEnableSwitch | INTEGER { disabled (0), enabled (1) } | current | Generic enabled switch. |
| IoaCommonEnableSwitchLocalAndRemote | INTEGER { disableLocalAndRemote (1), disableLocal (2), enabled (3) } | current | Enable switch for simultaneous control of local and remote resources. |
| IoaCommonEnableSwitchState | INTEGER { unknown (0), disabled (1), enabled (2) } | current | Generic enabled switch state. |
| IoaCommonHost | OCTET STRING | current | Generic address, may be an IPv4, IPv6 or a hostname for DNS resolution. |
| IoaCommonHourMinutesSeconds | OCTET STRING (SIZE (5..8)) | current | Timestamp with hours-minutes and optionally seconds. Leading zero is required (04:00 instead of 4:00). Examples: 23:00 (same as 23:00:00) 01:43:30 |
| IoaCommonNodeType | INTEGER { xpdr (1), ila (10), oadm (20) } | current | Main function NE agent operates. |
| IoaCommonNumberList | OCTET STRING (SIZE (0..255)) | current | List of numbers using ',' as separator and '..' to represent ranges. Examples: '12' , '1..4' , '1,5,10..12,20' |
| IoaCommonObjectName | OCTET STRING (SIZE (1..64)) | current | A custom type for entity (managed object) name |
| IoaCommonOptionalBoolean | OCTET STRING | current | Typedef for a optional boolean type. |
| IoaCommonPassword | OCTET STRING (SIZE (0..200)) | current | Generic type definition for a password attribute. Password characters may only include spaces, numbers, letters and ASCII symbols. Minimum length and password complexity rules are defined via security policy. |
| IoaCommonPercent | Unsigned32 (0 .. 100) | current | Percentage UNITS:percent |
| IoaCommonPercentEnum | INTEGER { t0 (0), t10 (1), t20 (2), t30 (3), t40 (4), t50 (5), t60 (6), t70 (7), t80 (8), t90 (9), t100 (10) } | current | NULL |
| IoaCommonPercentEnum5step | INTEGER { t0 (0), t5 (1), t10 (2), t15 (3), t20 (4), t25 (5), t30 (6), t35 (7), t40 (8), t45 (9), t50 (10), t55 (11), t60 (12), t65 (13), t70 (14), t75 (15), t80 (16), t85 (17), t90 (18), t95 (19), t100 (20) } | current | NULL |
| IoaCommonPortNumber | Unsigned32 (1..65535) | current | Port number. |
| IoaCommonPowerWatt | OCTET STRING | current | Power in watt; used for power draw related attributes. UNITS:W |
| IoaCommonProtectionType | INTEGER { yCable (10), sncN (20), sncI (30), unprotected (40) } | current | Represents the protection type this PG has. |
| IoaCommonRate | OCTET STRING | current | Rate of facilities in GBit/s. UNITS:Gbit/s |
| IoaCommonServerLayerAdaptation | OCTET STRING | current | Indicates services endpoint hierarchy. |
| IoaCommonSessionProtocol | INTEGER { none (0), telnet (1), telnetRaw (2), serial (3), ssh (4), sshRaw (5), https (6), http (7), tls (8) } | current | Protocol used for session establishment. |
| IoaCommonSessionType | INTEGER { none (0), cli (1), snmp (2), netconf (3), restconf (4), webgui (5), gnmi (6), tl1 (7), gnmiGnoi (8), netconfPss (9) } | current | Session type. |
| IoaCommonStorageSize | Unsigned32 | current | A generic storage or file size, in megabytes. UNITS:MB |
| IoaCommonTimeInterval | OCTET STRING (SIZE (0..32)) | current | Time interval using the following syntax: '[xw] [xd] [xh] [xm] [xs]' where: w(eeks), d(ays), h(ours), m(inutes), s(seconds). Examples: 2w - two weeks 5d 12h - 5 days and 12 hours 1h 7m 30s - 1 hour and 7 minutes and 30 … |
| IoaCommonTypeOfFiberLength | OCTET STRING | current | This indicates the fiber patch cord length between Raman DWDM port and base card DWDM Line port. UNITS:m |
| IoaCommonUserName | OCTET STRING (SIZE (1..64)) | current | Generic type definition for a user-name attribute. |
| IoaCommonZ85CharSet | OCTET STRING | current | A format for representing binary data as printable text. https://rfc.zeromq.org/spec/32/ |
| IoaEquipmentConsoleBaudRate | INTEGER { unknown (0), t9600 (6), t19200 (7), t38400 (8), t57600 (11), t115200 (12) } | current | Possible baud-rates for a serial console port. UNITS:baud |
| IoaEquipmentDuplexMode | INTEGER { unknown (0), full (1), half (2) } | current | The configured, negotiated, or actual duplex mode. |
| IoaEquipmentEthernetRate | INTEGER { unknown (0), t1 (1), t10 (10), t100 (100), t1000 (1000), t10000 (10000), maximum (2147483647) } | current | The configured, negotiated, or actual speed. UNITS:Mbit/s |
| IoaEquipmentFlowControl | INTEGER { unknown (0), disabled (1), biDirectional (2), egressOnly (3), ingressOnly (4) } | current | The configured, negotiated, or actual flow-control mode. |
| IoaEquipmentFwStatus | INTEGER { notApplicable (0), current (1), notCurrent (2), unavailable (3), compatible (4), notCurrentColdbootRequired (5), notCurrentWarmbootRequired (6), installInProgress (7) } | current | NULL |
| IoaEquipmentPhyMode | INTEGER { passive (0), t100ge (1), t200ge (2), t400ge (3), t4x100ge (4), t100g (5), t4x10g (6), t4x10ge (7), t1ge (8), t2g5 (9), t10g (10), t10ge (11), t2g5e (12), t40ge (13), t40g (14), t4x100g (15), t200g (16), t155m (17), t2x100ge (18), t1g (19), t4g (20), t400g (21), t2g (22), t8g (23), t16g (24), t32g (25), t622m (26), t4x16g (27), t4x8g (28), t2x32g (29), ampTof (30), t800ge (31), t2xotu4 (32), t2x400ge (33), t800g (34), t8x100ge (35), t4xotu4 (36), t10x10ge (37), amp (38) } | current | Phy mode of a TOM. |
| IoaFacilitiesCommonAinsSignalTimeInterval | Unsigned32 (0..7200) | current | A custom data type that indicates the AINS valid signal time interval type. UNITS:minutes |
| IoaFacilitiesCommonDirection | INTEGER { ingress (1), egress (2) } | current | Direction related with test signal and diagnostics. |
| IoaFacilitiesCommonDisableAction | INTEGER { laserShutOff (10), sendIdles (20), sendLf (30), sendAisL (40), oduAis (50), none (60), sendGais (70), sendMsAis (80), eCode (90), sendNos (100) } | current | Disable Action indicates what action the NE performs towards the client equipment. |
| IoaFacilitiesCommonFecType | INTEGER { cfec (1), ofec (2), g709 (3), nofec (4), i4 (5), i7 (6), sdfec15 (7), sdfec15nd (8), staircase7 (9), ufec7 (10), sdfec20 (11), rs528514 (12), rs544514 (13), sdfec15nd2 (14), sdfec27nd (15), ldpc (16), ldpc2 (17), ofecdiff (18) } | current | The FEC type |
| IoaFacilitiesCommonLoopbackType | INTEGER { none (10), facility (20), terminal (30) } | current | Loopback type. Useful to debug on the fiber connection. |
| IoaFacilitiesCommonMappingMode | INTEGER { gmp (1), bmp (2), openzrplus (3), flexe4x100g (4), gfpF (5), gfpFExtopu2 (6), amp (7), igmp (8), none (9), zr (10), flexoXe (11), ethSplit (12), gmpSplit (13), splitBmpOduflex (14), mlg (15) } | current | The tx mapping mode of client port. The possible values are dependent on the HW and configuration. |
| IoaFacilitiesCommonModulationFormat | INTEGER { notApplicable (0), dpQpsk (1), dp16qam (2), dp8qam (3), bpsk (4), dp16qamE (5), dp16qamPs (6), dpSpqpsk (7), dpSpqpskQpsk (8), dpSp16qam (9), dp32qam (10), dpSp16qam16qam (11), dpQpskSp16qam (12), dp64qam (13), dp16qam32qam (14), dp32qam64qam (15), dp16qamPcs (16), dpQpskPcs (17) } | current | Current modulation format |
| IoaFacilitiesCommonPrbsDirection | INTEGER { ingress (1), egress (2), both (3) } | current | Direction related with Ethernet test signal. |
| IoaFacilitiesCommonServiceMode | INTEGER { none (10), networkWrapper (20), adaptation (30), switching (40), transport (50) } | current | A custom type for legacy SM attribute. |
| IoaFacilitiesCommonServiceModeQualifier | OCTET STRING | current | A custom type for legacy SMQ attribute; string here represents the upper-layer protocol (e.g. ODUC4i). |
| IoaFacilitiesCommonSignalType | INTEGER { none (0), prbs31q (10), prbs13q (20), scrambledIdles (30), prbs9 (40), prbs31 (50), prbs31Noninv (60) } | current | The type of test pattern that is injected or monitored. |
| IoaFacilitiesCommonTrailTraceIdentifierAscii | OCTET STRING | current | Restrict this to printable ASCII characters. |
| IoaFacilitiesCommonTrailTraceIdentifierHex | OCTET STRING | current | Hex string with '0x' prefix. |
| IoaFacilitiesCommonTti15 | OCTET STRING | current | Hex string starting with '0x' or printable ASCII string with size 15. |
| IoaFacilitiesCommonTti32 | OCTET STRING | current | Hex string starting with '0x' or printable ASCII string with size 32. |
| IoaFacilitiesCommonTti64 | OCTET STRING | current | Hex string starting with '0x' or printable ASCII string with size 64. |
| IoaIkev2IkeIdentityType | INTEGER { ipv4Address (1), ipv6Address (2), fqdn (3), dnx509 (5), idKey (6) } | current | NULL |
| IoaIpsecChildSaDhGroup | INTEGER { dhe2048 (1), dhe3072 (2), dhe4096 (3), dhe6144 (4), dhe8192 (5), ecp256 (6), ecp384 (7), ecp521 (8), curve25519 (9), curve448 (10), mlKem512 (11) } | current | All Diffie-Hellman groups used with the Child SA. |
| IoaIpsecEncryptionAlgorithm | INTEGER { null (1), aesGcm8 (2), aesGcm12 (3), aesGcm16 (4), aesCtr (5), aesCbc (6), aesCcm8 (7), aesCcm12 (8), aesCcm16 (9), chacha20Poly1305 (10) } | current | All encryption algorithms used with the Child SA and the IKE SA. |
| IoaIpsecEncryptionKeyLength | INTEGER { none (0), keyLength128 (128), keyLength192 (192), keyLength256 (256) } | current | The key length (in bits) for the encryption algorithm. UNITS:bits |
| IoaIpsecIkeSaDhGroup | INTEGER { dhe2048 (1), dhe3072 (2), dhe4096 (3), dhe6144 (4), dhe8192 (5), ecp256 (6), ecp384 (7), ecp521 (8), curve25519 (9), curve448 (10), mlKem512 (11), mlKem768 (12), mlKem1024 (13), none (14) } | current | All Diffie-Hellman groups used with the IKE SA. |
| IoaIpsecIkeSaPrf | INTEGER { hmacSha2256 (1), hmacSha2384 (2), hmacSha2512 (3), hmacSha1 (4) } | current | All pseudo random functions used with the IKE SA. |
| IoaIpsecIntegrityAlgorithm | INTEGER { none (0), hmacSha2256128 (1), hmacSha2384192 (2), hmacSha2512256 (3), hmacSha1160 (4), hmacSha196 (5) } | current | All Integrity algorithms used with the Child SA and the IKE SA. |
| IoaIpsecProtocolId | INTEGER { ike (1), esp (3) } | current | The protocol ID used in the IKE SA and IPsec SA protocol proposals. |
| IoaIpsecStartPort | OCTET STRING | current | The values for the starting port |
| IoaL0ActualPsd | OCTET STRING | current | The actual Power Spectral Density. UNITS:nW/GHz |
| IoaL0AttenuationMon | OCTET STRING | current | Attenuation monitoring UNITS:dB |
| IoaL0BandOfTransmission | INTEGER { cBand485thz (2), cBand61thz (3), lBand485thz (4) } | current | Transmission band. |
| IoaL0ControlState | INTEGER { unknown (0), notApplicable (1), stopped (2), converged (3), fineTuning (4), adjusting (5) } | current | Control state for power/attenuation control loops. |
| IoaL0DeltaAseInsertion | OCTET STRING | current | Delta criteria for ASE Insertion; 99.9 means no ASE Insertion. UNITS:dB |
| IoaL0FiberType | INTEGER { notApplicable (0), auto (1), ssmf (2), leaf (3), twrs (4), twc (5), allwave (6), dsf (7), ls (8), puresilica (9), twreach (10), vistacor (11), teralight (12), drakall (13), twplus (14), twminus (15), pslc (16), ull (17), smfUll (18), notConfigured (99) } | current | Fiber Type OTS: It uniquely identifies the fiber-type OTDR: allows determination of attenuation (dB/ km) for calculation. |
| IoaL0FrequencyMHz | Unsigned32 | current | Frequency value in MHz. UNITS:MHz |
| IoaL0NmcAttenuationCompensation | OCTET STRING | current | Network Media Channel attenuation adjustment applied by auto-controls to do power targetting. UNITS:dB |
| IoaL0OpticalPowerActual | OCTET STRING | current | A custom data type that can be used for optical Tx/Rx power attributes. -99.00 means no power. UNITS:dBm |
| IoaL0OpticalPowerConfig | OCTET STRING | current | A custom data type that can be used for configuring optical Tx/Rx power attributes. UNITS:dBm |
| IoaL0OpticalPowerRaman | OCTET STRING | current | A custom data type that can be used for configuring optical Tx/Rx power attributes; This is higher than the usual optical-power-config range (-55 .. 55 dBm). UNITS:dBm |
| IoaL0OpticalWavelengthBand | INTEGER { notApplicable (0), cBand (1), lBand (2) } | current | NULL |
| IoaL0PowerAdjustStage | INTEGER { notApplicable (0), init (1), disabled (2), manual (3), frozen (4), waitUpgrade (5), upgrading (6), cpa (7), losing (8), rcdLost (9), upstreamLost (10), localLost (11), notConfigured (99) } | current | Define enumeration for L0 power adjustment stage. |
| IoaL0SpanLoss | OCTET STRING | current | Span Loss. UNITS:dB |
| IoaL0SpanLossInfo | OCTET STRING | current | Span Loss information; 99 dB indicates OSC LOS. UNITS:dB |
| IoaL0StateOfAseIdlerService | INTEGER { aseEnabled (0), asePartiallyEnabled (1), aseFaulted (2), aseDisabled (3) } | current | Type definition for the ASE Idler service state(s). |
| IoaL0TargetPowerType | OCTET STRING | current | A custom data type that can be used for configuring optical Tx/Rx power attributes. UNITS:dBm |
| IoaL0TransmissionBand | INTEGER { notApplicable (0), standardcBand (1), supercBand (2), standardlBand (3), standardcStandardlBand (4) } | current | Transmission band. |
| IoaL0TypeOfAcquisitionMode | INTEGER { manualAcquisitionMode (1), automaticAcquisitionMode (2) } | current | Automatic Channel Recovery Detection, reference trace acquisition type. |
| IoaL0TypeOfAttenuation | OCTET STRING | current | Attenuation. UNITS:dB |
| IoaMgmtProtocolsSnmpString | OCTET STRING (SIZE (1..32)) | current | NULL |
| IoaNeFunctionRailOperatingMode | INTEGER { omsProtectionTerminal (1), ila (2) } | current | Rail operational mode. |
| IoaNetworkingIpAddressConfigMode | INTEGER { static (1), dhcp (2) } | current | IP address assignment method. |
| IoaNetworkingProtectionMode | INTEGER { unknown (0), protected (1), unprotected (2) } | current | Protection-mode/state of interface. |
| IoaNmcNmcAttenuationActual | OCTET STRING | current | Network Media Channel current attenuation UNITS:dB |
| IoaNmcNmcAttenuationOffset | OCTET STRING | current | Network Media Channel target attenuation. UNITS:dB |
| IoaNmcNmcAttenuationTarget | OCTET STRING | current | Network Media Channel target attenuation. UNITS:dB |
| IoaOmsAttControlMode | INTEGER { notApplicable (0), auto (1), manual (2) } | current | Attenuation control mode. |
| IoaOmsGridType | INTEGER { fixed50g96ch (1), fixed100g48ch (2), fixed75g64ch (3), flexible (4), fixed75g64chOif (5), fixed50g7100 (6), fixed150g40ch (7) } | current | Type of channel grid. |
| IoaOmsSupportedBandAndGrid | INTEGER { notApplicable (0), flexibleCBandOnly (1), generalCBand (2), generalFixedCBand (3), generalLBand (4), flexibleBand (5) } | current | Supported grid modes. |
| IoaOmsTypeOfOmsMonitoringMode | INTEGER { intrusive (1), notMonitored (2), nonIntrusive (3), dgeFixedAttenuation (4), ilaWithEqualization (5), terminal (6), integratedEqualization (7) } | current | OMS monitoring mode (specific typedef). |
| IoaOpticalCommonOpticalFrequency | OCTET STRING | current | A super set for line and client side carrier frequency, specific sub-range is depend on application. 0 represents a non-initialized frequency. UNITS:MHz |
| IoaOpticalCommonOpticalFrequencyConfig | OCTET STRING | current | The center frequency this carrier is tuned to. |
| IoaOpticalCommonOpticalPower | OCTET STRING | current | A custom data type that can be used for optical Tx/Rx power attributes. UNITS:dBm |
| IoaOpticalCommonOpticalWavelength | OCTET STRING | current | A custom data type for optical wavelength. The data type allows specific range of values for optical carriers in C-Band and L-Band regions. UNITS:nm |
| IoaOpticalCommonPowerOffset | OCTET STRING | current | Offset from a standard optical-power value. UNITS:dB |
| IoaOscTypeOfOscMonitoringMode | INTEGER { intrusive (20), nonIntrusive (30) } | current | OSC monitoring mode (specific typedef). |
| IoaOtnCommonMonitoringMode | INTEGER { unused (10), intrusive (20), nonIntrusive (30), limitedNonIntrusive (40) } | current | Possible modes for monitoring in OTN entities. |
| IoaOtnCommonOduType | INTEGER { oducn (1), oducni (2), oducniM (3), odu4 (4), odu4i (5), oduflexi (6), oduflex (7), odu0 (8), odu1 (9), odu2 (10), odu2e (11) } | current | A custom data type for ODUk/ODUCn clients. |
| IoaOtnCommonOtuType | INTEGER { otucn (1), otucni (2), otucniM (3), otu4 (4), otu2 (5), otu2e (6), otuflex (7) } | current | The protocol type of the OTUk/OTUCn client. |
| IoaOtnCommonPayloadType | OCTET STRING | current | Hex string with '0x' prefix. |
| IoaOtsFiberLengthAuto | OCTET STRING | current | Fiber Length configuration for OTS. UNITS:km |
| IoaOtsRamanCoefficient | OCTET STRING | current | Raman coefficient. UNITS:dB/THz/W |
| IoaOtsTiltFsatType | OCTET STRING | current | Spectrum Tilt. UNITS:dB/THz |
| IoaOtsTypeOfFiberLength | OCTET STRING | current | Fiber Length configuration or detection. UNITS:km |
| IoaPleiwMicrosecondsOrPercentage | OCTET STRING | current | An interval of time in microseconds or a percentage. |
| IoaPmDataType | INTEGER { current (1), history (2), realTime (3) } | current | Type of PM data to retrieve. |
| IoaPmPmDataType | INTEGER { na (0), uint (1), int (2), decimal2 (3), decimal4 (4), decimal7 (5), decimal18 (6), decimal12 (7) } | current | Data type of the PM parameter. |
| IoaPmPmUnitType | INTEGER { na (0), dbm (1), ms (2), ps (3), psNm (4), db (5), seconds (6), packets (7), events (8), octets (9), bits (10), blocks (11), times (12), percent (13), bitRatio (14), c (15), frames (16), w (17), v (18), a (19), rpm (20), ps2 (21), ma (22), words (23), cw (24), nm (25), bytes (26), errors (27), mhz (28), kib (29), degrees (30), radsS (31) } | current | Unit of the PM parameter. |
| IoaPmPmValueType | OCTET STRING | current | Data type that is used for all PM parameters. |
| IoaProtectionOpticalDB | OCTET STRING | current | Optical Attribute value with Unit dB, 1 fraction digit. UNITS:dB |
| IoaProtectionStateOfPg | INTEGER { noRequest (10), doNotRevert (20), manualToWorking (30), manualToProtection (40), forcedToWorking (50), forcedToProtection (60), protectionLockout (70), sfOnWorking (80), sfOnProtection (90), sdOnWorking (100), sdOnProtection (110), waitToRestore (120), frozen (130), unavailable (140), manualToWorkingRemote (150), manualToProtectionRemote (160), forcedToWorkingRemote (170), forcedToProtectionRemote (180), protectionLockoutRemote (190), sfOnWorkingRemote (200), sfOnProtectionRemote (210), sdOnWorkingRemote (220), sdOnProtectionRemote (230), waitToRestoreRemote (240), exercise (250), exerciseRemote (260) } | current | State of Protection Group |
| IoaProtectionWorkingOrProtectingLeg | INTEGER { working (1), protection (2), protection1 (3), protection2 (4), protection3 (5) } | current | Active Path |
| IoaRpcDbInstanceType | INTEGER { active (1), onehour (2), oneday (3), oneweek (4), temp (5), manual (6), rollback (7) } | current | NULL |
| IoaRpcFilePath | OCTET STRING (SIZE (0..255)) | current | File path using a restricted character set suitable for shell interpolation (no spaces, dollar signs, quotes, backticks, or command separators). |
| IoaSecurityActionType | INTEGER { permit (0), deny (1) } | current | Generic data type to represent a permit/deny action. |
| IoaSecurityDaysOrPercentage | OCTET STRING | current | An interval of time before something happens, represented in days or in a percentage of the total lifetime. |
| IoaSecurityMatchAll | OCTET STRING (SIZE (1)) | current | The string containing a single asterisk '*' is used to conceptually represent all possible values for the particular leaf using this data type (e.g. wildcard). |
| IoaSecurityShaFingerprint | OCTET STRING (SIZE (0|95|191)) | current | A certificate/key fingerprint that is either SHA-256 (32 octets) or SHA-512 (64 octets) in colon-separated hexadecimal form, e.g., 'Ab:Cd:Ef:01:23:45:...:89'. Hexadecimal characters are case-insensitive. |
| IoaServicesActivationRequestType | INTEGER { noRequest (0), activate (1), deactivate (2) } | current | Service activation request type. |
| IoaServicesActivationStateType | INTEGER { notApplicable (0), activated (1), partiallyActivated (2), faulted (3), deactivated (4) } | current | Service activation state type. |
| IoaServicesNetworkMappingType | INTEGER { na (0), oducn (1), oducni (2), oducniM (3), odu4 (4), odu4i (5), oduflexi (6), oduflex (7), odu0 (8), odu1 (9), odu2 (10), odu2e (11), odu2Amp (12), odu2Bmp (13) } | current | Network mapping extra values. |
| IoaSyslogSensitiveDataOptions | INTEGER { none (0), both (1), only (2) } | current | NULL |
| IoaSyslogSyslogFacility | INTEGER { kernel (0), userLevel (1), mailSystem (2), systemDaemons (3), authentication (4), syslogInternal (5), linePrinter (6), networkNews (7), uucp (8), clockDaemon9 (9), security (10), ftpDaemon (11), ntp (12), logAudit (13), logAlert (14), clockDaemon15 (15), local0 (16), local1 (17), local2 (18), local3 (19), local4 (20), local5 (21), local6 (22), local7 (23), all (100) } | current | List of syslog facilities. |
| IoaTimeMillisec | OCTET STRING | current | NULL UNITS:ms |
| IoaTopologyCableIdTestResult | INTEGER { notVerified (1), pass (2), fail (3), suspected (4) } | current | Cable ID verification result |
| IoaTopologyFiberConnectionType | INTEGER { twoWay (1), oneWay (2) } | current | Generic Link Directionality |
| IoaTopologyLldpMode | INTEGER { disabled (0), snoop (1), drop (2), snoopAndDrop (3) } | current | Mode in which LLDP is working. |
| IoaTopologyLldpSysCap | BITS { other (0), repeater (1), bridge (2), wlanAccessPoint (3), router (4), telephone (5), docsisCableDevice (6), stationOnly (7), cVlanComponent (8), sVlanComponent (9), twoPortMacRelay (10) } | current | LLDP remote system capabilities bit set. |
| IoaTransferFtsFiletype | INTEGER { database (1), swimage (2), krp (3), script (5), debugLog (6), pmLogs (7), localCertificate (8), trustedCertificate (9), fdrLog (10), logs (11), file (12), peerCertificate (13), crl (14), otdrResult (15) } | current | Global list of file-types supported in the system for both upload and download. Note that not all file-types support both upload and download operations, some support only one of them. |