MIB Viewer

IPE-DOT3OAM-MIB

115 objects
No module-level DESCRIPTION found.
Imported Objects
IF-MIBDefinitions ----------------------------------------------- IMPORTS InterfaceIndex InterfaceIndexOrZero
SNMPv2-SMICounter32 enterprises Integer32 IpAddress NOTIFICATION-TYPE OBJECT-TYPE Opaque Unsigned32
SNMPv2-TCDateAndTime MacAddress TEXTUAL-CONVENTION
OIDNameAccessStatusDescription
1.3.6.1.4.1.119Nodenec
1.3.6.1.4.1.119.2Nodenec-mib
1.3.6.1.4.1.119.2.3NodenecProductDepend
1.3.6.1.4.1.119.2.3.69NoderadioEquipment
1.3.6.1.4.1.119.2.3.69.501NodepasoNeoIpe-common
1.3.6.1.4.1.119.2.3.69.501.3NodealarmStatusGroup
1.3.6.1.4.1.119.2.3.69.501.3.46NodeasDot3OamGroup
1.3.6.1.4.1.119.2.3.69.501.3.46.1TableasDot3OamPortTablenot-accessiblecurrentThis table contains status of the OAM capabilities of the interface.
1.3.6.1.4.1.119.2.3.69.501.3.46.1.1RowasDot3OamPortEntrynot-accessiblecurrentEntries in the table are created automatically.
1.3.6.1.4.1.119.2.3.69.501.3.46.1.1.1ColumnasDot3OamPortIfIndexnot-accessiblecurrentIndex of this table.
1.3.6.1.4.1.119.2.3.69.501.3.46.1.1.2ColumnasDot3OamPortNEAddressnot-accessiblecurrentreserved.
1.3.6.1.4.1.119.2.3.69.501.3.46.1.1.3ColumnasDot3OamPortOperStatusread-onlycurrentThis value is always disabled(1) if OAM is disabled on the interface via the provDot3OamPortEnabled. If the link has detected a fault and is transmitting OAMPD…
1.3.6.1.4.1.119.2.3.69.501.3.46.1.1.4ColumnasDot3OamPortMaxOamPduSizeread-onlycurrentThe largest OAMPDU that the OAM entity supports. OA entities exchange maximum OAMPDU sizes and negotiate to use the smaller of the two maximum OAMPDU sizes bet…
1.3.6.1.4.1.119.2.3.69.501.3.46.1.1.5ColumnasDot3OamPortConfigRevisionread-onlycurrentThe configuration revision of the OAM entity as reflected in the latest OAMPDU sent by the OAM entity. The config revision is used by OAM entities to indicate …
1.3.6.1.4.1.119.2.3.69.501.3.46.1.1.6ColumnasDot3OamPortFunctionsSupportedread-onlycurrentThe OAM functions supported on this interface. OAM consists of separate functional sets beyond the basic discovery process that is always required. These funct…
1.3.6.1.4.1.119.2.3.69.501.3.46.2TableasDot3OamPeerTablenot-accessiblecurrentThis table contains information about the OAM peer for a particular interface. OAM entities communicates with a single OAM peer entity on Ethernet links.
1.3.6.1.4.1.119.2.3.69.501.3.46.2.1RowasDot3OamPeerEntrynot-accessiblecurrentAn entry in the table containing information on the peer entity for a single interface. Note that there is at most on OAM peer for each interface. Peer informa…
1.3.6.1.4.1.119.2.3.69.501.3.46.2.1.1ColumnasDot3OamPeerIfIndexnot-accessiblecurrentIndex of this table.
1.3.6.1.4.1.119.2.3.69.501.3.46.2.1.2ColumnasDot3OamPeerNEAddressnot-accessiblecurrentreserved.
1.3.6.1.4.1.119.2.3.69.501.3.46.2.1.3ColumnasDot3OamPeerMacAddressread-onlycurrentThe MAC address of the peer OAM entity. The MAC address is derived from the most recently received OAMPDU.
1.3.6.1.4.1.119.2.3.69.501.3.46.2.1.4ColumnasDot3OamPeerVendorOuiread-onlycurrentThe OUI of the OAM peer as reflected in the latest Information OAMPDU received with a Local Information TLV. The OUI can be used to identify the vendor of the …
1.3.6.1.4.1.119.2.3.69.501.3.46.2.1.5ColumnasDot3OamPeerVendorInforead-onlycurrentThe Vendor Info of the OAM peer as reflected in the latest Information OAMPDU received with a Local Information TLV. The semantics of the Vendor Information fi…
1.3.6.1.4.1.119.2.3.69.501.3.46.2.1.6ColumnasDot3OamPeerModeread-onlycurrentThe mode of the OAM peer as reflected in the latest Information OAMPDU received with a Local Information TLV. The mode of the peer can be determined from the C…
1.3.6.1.4.1.119.2.3.69.501.3.46.2.1.7ColumnasDot3OamPeerMaxOamPduSizeread-onlycurrentThe maximum size of OAMPDU supported by the peer as reflected in the latest Information OAMPDU received with a Local Information TLV. Ethernet OAM on this inte…
1.3.6.1.4.1.119.2.3.69.501.3.46.2.1.8ColumnasDot3OamPeerConfigRevisionread-onlycurrentThe configuration revision of the OAM peer as reflected in the latest OAMPDU. This attribute is changed by the peer whenever it has a local configuration chang…
1.3.6.1.4.1.119.2.3.69.501.3.46.2.1.9ColumnasDot3OamPeerFunctionsSupportedread-onlycurrentThe OAM functions supported on the interface. OAM consists of separate functionality sets above the basic discovery process. This value indicates the capabilit…
1.3.6.1.4.1.119.2.3.69.501.3.46.3TableasDot3OamPortStatsTablenot-accessiblecurrentThis table contains statistics for the OAM function on a particular interface. There is an entry in the table for every asDot3OamPortTable.
1.3.6.1.4.1.119.2.3.69.501.3.46.3.1RowasDot3OamPortStatsEntrynot-accessiblecurrentAn entry in the table containing statistics information on the Ethernet OAM function for a single interface. Entries are automatically created for every entry …
1.3.6.1.4.1.119.2.3.69.501.3.46.3.1.1ColumnasDot3OamPortStatsIfIndexnot-accessiblecurrentIndex of this table.
1.3.6.1.4.1.119.2.3.69.501.3.46.3.1.2ColumnasDot3OamPortStatsNEAddressnot-accessiblecurrentreserved.
1.3.6.1.4.1.119.2.3.69.501.3.46.3.1.3ColumnasDot3OamInformationTxread-onlycurrentA count of the number of Information OAMPDUs transmitted on the interface.
1.3.6.1.4.1.119.2.3.69.501.3.46.3.1.4ColumnasDot3OamInformationRxread-onlycurrentA count of the number of Information OAMPDUs received on the interface.
1.3.6.1.4.1.119.2.3.69.501.3.46.3.1.5ColumnasDot3OamUniqueEventNotifTxread-onlycurrentA count of the number of unique Event OAMPDUs transmitted on the interface. Event Notifications may be sent in duplicate to increase the probability of success…
1.3.6.1.4.1.119.2.3.69.501.3.46.3.1.6ColumnasDot3OamUniqueEventNotifRxread-onlycurrentA count of the number of unique Event OAMPDUs received on the interface. Event Notifications may be sent in duplicate to increase the probability of successful…
1.3.6.1.4.1.119.2.3.69.501.3.46.3.1.7ColumnasDot3OamDuplicateEventNotifTxread-onlycurrentA count of the number of duplicate Event OAMPDUs transmitted on the interface. Event Notification OAMPDUs may be sent in duplicate to increase the probability …
1.3.6.1.4.1.119.2.3.69.501.3.46.3.1.8ColumnasDot3OamDuplicateEventNotifRxread-onlycurrentA count of the number of duplicate Event OAMPDUs received on the interface. Event Notification OAMPDUs may be sent in duplicate to increase the probability of …
1.3.6.1.4.1.119.2.3.69.501.3.46.3.1.9ColumnasDot3OamLoopbackControlTxread-onlycurrentA count of the number of Loopback Control OAMPDUs transmitted on the interface.
1.3.6.1.4.1.119.2.3.69.501.3.46.3.1.10ColumnasDot3OamLoopbackControlRxread-onlycurrentA count of the number of Loopback Control OAMPDUs received on the interface.
1.3.6.1.4.1.119.2.3.69.501.3.46.3.1.11ColumnasDot3OamVariableRequestTxread-onlycurrentA count of the number of Variable Request OAMPDUs transmitted on the interface.
1.3.6.1.4.1.119.2.3.69.501.3.46.3.1.12ColumnasDot3OamVariableRequestRxread-onlycurrentA count of the number of Variable Request OAMPDUs received on the interface.
1.3.6.1.4.1.119.2.3.69.501.3.46.3.1.13ColumnasDot3OamVariableResponseTxread-onlycurrentA count of the number of Variable Response OAMPDUs transmitted on the interface.
1.3.6.1.4.1.119.2.3.69.501.3.46.3.1.14ColumnasDot3OamVariableResponseRxread-onlycurrentA count of the number of Variable Response OAMPDUs received on the interface.
1.3.6.1.4.1.119.2.3.69.501.3.46.3.1.15ColumnasDot3OamOrgSpecificTxread-onlycurrentA count of the number of Organization Specific OAMPDUs transmitted on the interface.
1.3.6.1.4.1.119.2.3.69.501.3.46.3.1.16ColumnasDot3OamOrgSpecificRxread-onlycurrentA count of the number of Organization Specific OAMPDUs received on the interface.
1.3.6.1.4.1.119.2.3.69.501.3.46.3.1.17ColumnasDot3OamUnsupportedCodesTxread-onlycurrentA count of the number of OAMPDUs transmitted on the interface with an unsupported op-code.
1.3.6.1.4.1.119.2.3.69.501.3.46.3.1.18ColumnasDot3OamUnsupportedCodesRxread-onlycurrentA count of the number of OAMPDUs received on the interface with an unsupported op-code.
1.3.6.1.4.1.119.2.3.69.501.3.46.3.1.19ColumnasDot3OamFramesLostDueToOamread-onlycurrentA count of the number of frames that were dropped by the OA multiplexer. Since the OAM multiplexer has multiple inputs and a single output, there may be cases …
1.3.6.1.4.1.119.2.3.69.501.3.46.4TableasDot3OamPortAlarmTablenot-accessiblecurrentThis table contains alarm & status information of the interface.
1.3.6.1.4.1.119.2.3.69.501.3.46.4.1RowasDot3OamPortAlarmEntrynot-accessiblecurrentAn entry in the table containing alarm & status information on the Ethernet OAM function for a single interface. Entries are automatically created for enery en…
1.3.6.1.4.1.119.2.3.69.501.3.46.4.1.1ColumnasDot3OamPortAlarmIfIndexnot-accessiblecurrentIndex of this table.
1.3.6.1.4.1.119.2.3.69.501.3.46.4.1.2ColumnasDot3OamPortAlarmNEAddressnot-accessiblecurrentreserved.
1.3.6.1.4.1.119.2.3.69.501.3.46.4.1.3ColumnasDot3OamPortLinkOamDownread-onlycurrentThe alarm status of the OAM function status. When the Discovery State of the interface is not in SEND_ANY, the object becomes alarm state.
1.3.6.1.4.1.119.2.3.69.501.3.46.4.1.4ColumnasDot3OamPortLocalDyingGaspread-onlycurrentGenerating Dying Gasp OAMPDU status. If the OAM entity sends the DyingGasp OAMPDUs, the object will return the value 'generated'.
1.3.6.1.4.1.119.2.3.69.501.3.46.4.1.5ColumnasDot3OamPortLocalCriticalEventread-onlycurrentGenerating Critical Event OAMPDU status. If the OAM entity sends the CriticalEvent OAMPDUs, the object will return the value 'generated'.
1.3.6.1.4.1.119.2.3.69.501.3.46.4.1.6ColumnasDot3OamPortRemoteErroredSymbolEventread-onlycurrentReceiving Errored Symbol Event OAMPDU status. If the OAM entity receives the ErroredSymbolEvent OAMPDUs from peer, the object will show the value 'received'.
1.3.6.1.4.1.119.2.3.69.501.3.46.4.1.7ColumnasDot3OamPortRemoteErroredFramePeriodEventread-onlycurrentReceiving Errored Frame Period Event OAMPDU status. If the OAM entity receives the ErroredFramePeriodEvent OAMPDUs from peer, the object will show the value 'r…
1.3.6.1.4.1.119.2.3.69.501.3.46.4.1.8ColumnasDot3OamPortRemoteErroredFrameEventread-onlycurrentReceiving Errored Frame Event OAMPDU status. If the OAM entity receives the ErroredFrameEvent OAMPDUs from peer, the object will show the value 'received'.
1.3.6.1.4.1.119.2.3.69.501.3.46.4.1.9ColumnasDot3OamPortRemoteErroredFrameSecondEventread-onlycurrentReceiving Errored Frame Second Event OAMPDU status. If the OAM entity receives the ErroredFrameSecondEvent OAMPDUs from peer, the object will show the value 'r…
1.3.6.1.4.1.119.2.3.69.501.3.46.4.1.10ColumnasDot3OamPortRemoteLinkFaultread-onlycurrentReceiving Link Fault OAMPDU. If the OAM entity receives the LinkFault OAMPDUs from peer, the object will report Link Fault Alarm of the interface.
1.3.6.1.4.1.119.2.3.69.501.3.46.4.1.11ColumnasDot3OamPortRemoteDyingGaspread-onlycurrentReceiving DyingGasp OAMPDU. If the OAM entity receives the DyingGasp OAMPDUs from peer, the object will report DyingGasp Alarm of the interface.
1.3.6.1.4.1.119.2.3.69.501.3.46.4.1.12ColumnasDot3OamPortRemoteCriticalEventread-onlycurrentReceiving Critial Event OAMPDU. If the OAM entity receives the CriticalEvent OAMPDUs from peer, the object will report CriticalEvent Alarm of the interface.
1.3.6.1.4.1.119.2.3.69.501.5NodeprovisioningGroup
1.3.6.1.4.1.119.2.3.69.501.5.46NodeprovDot3OamGroup
1.3.6.1.4.1.119.2.3.69.501.5.46.1TableprovDot3OamPortTablenot-accessiblecurrentThis table contains provisioning objects for the OAM function on a particular interface.
1.3.6.1.4.1.119.2.3.69.501.5.46.1.1RowprovDot3OamPortEntrynot-accessiblecurrentAn entry in the table that contains configuration on the Ethernet OAM function for sngle interface. Entries in the table are created automatically for each int…
1.3.6.1.4.1.119.2.3.69.501.5.46.1.1.1ColumnprovDot3OamPortIfIndexnot-accessiblecurrentIndex of this table.
1.3.6.1.4.1.119.2.3.69.501.5.46.1.1.2ColumnprovDot3OamPortNEAddressnot-accessiblecurrentreserved.
1.3.6.1.4.1.119.2.3.69.501.5.46.1.1.3ColumnprovDot3OamPortEnabledread-writecurrentThis object is used to provision the default administrative OAM mode for the interface. This object represents the desired state of OAM for this interface. Thi…
1.3.6.1.4.1.119.2.3.69.501.5.46.1.1.4ColumnprovDot3OamPortModeread-writecurrentThis object configures the mode of OAM operation for this interface. OAM on Ethernet interfaces may be in 'active' mode or 'passive' mode. These two modes diff…
1.3.6.1.4.1.119.2.3.69.501.5.46.1.1.5ColumnprovDot3OamTxPduRepetitionTimesread-writecurrentThis object configures the number of notification OAMPDUs when the critical event occurs.
1.3.6.1.4.1.119.2.3.69.501.5.46.1.1.6ColumnprovDot3OamLocalLinkLostTimerread-writecurrentThis object configures the detection time of losing the OAM Link state.
1.3.6.1.4.1.119.2.3.69.501.5.46.1.1.7ColumnprovDot3OamTxPduCountsread-writecurrentThis object configures the maximum transmission counts of slow protocol PDUs excluding DyingGasp and Critical Event PDUs.
1.3.6.1.4.1.119.2.3.69.501.5.46.1.1.8ColumnprovDot3OamLoopbackIgnoreRxread-writecurrentIf ignore(1) is set, the OAM entity ignores Loopback Request OAMPDUs from peer OAM entity, and the OAM entity can only initiate loopback locally. It is necessa…
1.3.6.1.4.1.119.2.3.69.501.5.46.1.1.9ColumnprovDot3OamLlfCriticalEventread-writecurrentIf enable is set, the OAM entity sends OAMPDUs with Critical Event flag when the LLF control is notified.
1.3.6.1.4.1.119.2.3.69.501.5.46.3TableprovDot3OamEventTablenot-accessiblecurrentEthernet OAM includes the ability to generate and receive Event Notification OAMPDUs to indicate various link problems. This table contains the mechanisms to e…
1.3.6.1.4.1.119.2.3.69.501.5.46.3.1RowprovDot3OamEventEntrynot-accessiblecurrentEntries are automatically created and deleted from this table, and exists whenever the OAM entity supports Ethernet OA events. Event configuration controls whe…
1.3.6.1.4.1.119.2.3.69.501.5.46.3.1.1ColumnprovDot3OamEventIfIndexnot-accessiblecurrentIndex of this table.
1.3.6.1.4.1.119.2.3.69.501.5.46.3.1.2ColumnprovDot3OamEventNEAddressnot-accessiblecurrentreserved.
1.3.6.1.4.1.119.2.3.69.501.5.46.3.1.3ColumnprovDot3OamErrSymPeriodEvNotifEnableread-writecurrentIf enable, the OAM entity should send an Event Notification OAMPDU when an Errored Symbol Period Event occurs.
1.3.6.1.4.1.119.2.3.69.501.5.46.3.1.4ColumnprovDot3OamErrFramePeriodEvNotifEnableread-writecurrentIf enable, the OAM entity should send an Event Notification OAMPDU when an Errored Frame Period Event occurs.
1.3.6.1.4.1.119.2.3.69.501.5.46.3.1.5ColumnprovDot3OamErrFrameEvNotifEnableread-writecurrentIf enable, the OAM entity should send an Event Notification OAMPDU when an Errored Frame Event occurs.
1.3.6.1.4.1.119.2.3.69.501.5.46.3.1.6ColumnprovDot3OamErrFrameSecsEvNotifEnableread-writecurrentIf enable, the local OAM entity should send an Event Notification OAMPDU when an Errored Frame Seconds Event occurs.
1.3.6.1.4.1.119.2.3.69.501.5.46.3.1.7ColumnprovDot3OamDyingGaspEnableread-writecurrentIf enable, the local OAM entity should attempt to indicate a dying gasp via the OAMPDU flags to its peer OAM entity when a dying gasp event occurs.
1.3.6.1.4.1.119.2.3.69.501.5.46.3.1.8ColumnprovDot3OamCriticalEventEnableread-writecurrentIf enable, the local OAM entity should attempt to indicate a critical event via the OAMPDU flags to its peer OAM entity when a critical event occurs.
1.3.6.1.4.1.119.2.3.69.501.6NodemaintenanceGroup
1.3.6.1.4.1.119.2.3.69.501.6.46NodemaintDot3OamGroup
1.3.6.1.4.1.119.2.3.69.501.6.46.1TablemaintDot3OamLoopbackTablenot-accessiblecurrentThis table contains the On-demand Loopback control objects for Ethernet OAM functions.
1.3.6.1.4.1.119.2.3.69.501.6.46.1.1RowmaintDot3OamLoopbackEntrynot-accessiblecurrentThe system can execute up to 5 loopback functions simultaneously, so 5 entries are automatically created when agent boots.
1.3.6.1.4.1.119.2.3.69.501.6.46.1.1.1ColumnmaintDot3OamLoopbackIndexnot-accessiblecurrentIndex of this table.
1.3.6.1.4.1.119.2.3.69.501.6.46.1.1.2ColumnmaintDot3OamLoopbackNEAddressnot-accessiblecurrentreserved.
1.3.6.1.4.1.119.2.3.69.501.6.46.1.1.3ColumnmaintDot3OamLoopbackIfIndexread-writecurrentSet Index of target interface. The default value of this object is '0', and the value is necessary for executing loopback function.
1.3.6.1.4.1.119.2.3.69.501.6.46.1.1.4ColumnmaintDot3OamLoopbackExecuteread-writecurrentThe object is used to execute loopback function. Setting to 'execute' to start loopback testing.
1.3.6.1.4.1.119.2.3.69.501.6.46.1.1.5ColumnmaintDot3OamLoopbackFramesread-writecurrentThe object is used to configure the number of transmit loopback frames.
1.3.6.1.4.1.119.2.3.69.501.6.46.1.1.6ColumnmaintDot3OamLoopbackPDULengthread-writecurrentThe length of Loopback OAMPDU.
1.3.6.1.4.1.119.2.3.69.501.6.46.1.1.7ColumnmaintDot3OamLoopbackTxCountsread-writecurrentThe object is used to configure the number of transmit frames per second.
1.3.6.1.4.1.119.2.3.69.501.6.46.1.1.8ColumnmaintDot3OamLoopbackTimeoutread-writecurrentThe object is used to configure the time of detecting timeout of loopback testing.
1.3.6.1.4.1.119.2.3.69.501.6.46.2TablemaintDot3OamLoopbackResultTablenot-accessiblecurrentThis table contains the results of loopback testing. The results will be updated when the loopback testing is completed.
1.3.6.1.4.1.119.2.3.69.501.6.46.2.1RowmaintDot3OamLoopbackResultEntrynot-accessiblecurrentThe entries are automatically created when the agent boots. And the index of the entry is identical to the 'maintDot3OamLoopbackIndex'.
1.3.6.1.4.1.119.2.3.69.501.6.46.2.1.1ColumnmaintDot3OamLoopbackResultIndexnot-accessiblecurrentIndex of this table.
1.3.6.1.4.1.119.2.3.69.501.6.46.2.1.2ColumnmaintDot3OamLoopbackResultNEAddressnot-accessiblecurrentreserved.
1.3.6.1.4.1.119.2.3.69.501.6.46.2.1.3ColumnmaintDot3OamLoopbackResultTxFramesread-onlycurrentThe number of transmitted loopback OAMPDUs.
1.3.6.1.4.1.119.2.3.69.501.6.46.2.1.4ColumnmaintDot3OamLoopbackResultTxFrameOctetsread-onlycurrentThe total octets of transmitted loopback OAMPDUs.
1.3.6.1.4.1.119.2.3.69.501.6.46.2.1.5ColumnmaintDot3OamLoopbackResultRxFramesread-onlycurrentThe number of received loopback OAMPDUs.
1.3.6.1.4.1.119.2.3.69.501.6.46.2.1.6ColumnmaintDot3OamLoopbackResultRxFrameOctetsread-onlycurrentThe total octets of received loopback OAMPDUs.
1.3.6.1.4.1.119.2.3.69.501.6.46.2.1.7ColumnmaintDot3OamLoopbackResultRxErroredFramesread-onlycurrentThe number of received errored OAMPDUs.
1.3.6.1.4.1.119.2.3.69.501.6.46.2.1.8ColumnmaintDot3OamLoopbackResultExecStatusread-onlycurrentThe status of loopback test result. 'noLoopback' means no loopback test is executing. 'executing' represents the loopback test is in progress, and the new loop…
1.3.6.1.4.1.119.2.3.69.501.6.46.2.1.9ColumnmaintDot3OamLoopbackResultLastExecuteread-onlycurrentThe date and time of executing loopback test.
1.3.6.1.4.1.119.2.3.69.501.6.46.3TablemaintDot3OamLoopbackPortTablenot-accessiblecurrentThis table contains control objects for loopback which was triggered by peer node.
1.3.6.1.4.1.119.2.3.69.501.6.46.3.1RowmaintDot3OamLoopbackPortEntrynot-accessiblecurrent
1.3.6.1.4.1.119.2.3.69.501.6.46.3.1.1ColumnmaintDot3OamLoopbackPortIfIndexnot-accessiblecurrentIndex of this table.
1.3.6.1.4.1.119.2.3.69.501.6.46.3.1.2ColumnmaintDot3OamLoopbackPortNEAddressnot-accessiblecurrentreserved.
1.3.6.1.4.1.119.2.3.69.501.6.46.3.1.3ColumnmaintDot3OamLoopbackPortControlread-writecurrentThis object controls the loopback function. Writing the value 'initiateLoopback' causes the local OAM entity to start the loopback process with its peer. This …
1.3.6.1.4.1.119.2.3.69.501.6.46.3.1.4ColumnmaintDot3OamLoopbackPortStatusread-onlycurrentThe loopback status of the local OAM entity. This object returns the loopback point. This means that the value 'remoteLoopback' represents the local OAM entity…
Type Definitions
NameSyntaxStatusDescription
EnableDisableValueINTEGER { invalid(0), disable(1), enable(2) }currentEnable/Disable Type
SeverityValueINTEGER { cleared(1), indetermine(2), critical(3), major(4), minor(5), warning(6) }currentSeverity (CCITT Rec. X.733)
MIB Viewer