MIB Viewer

IPE-LAG-MIB

79 objects
No module-level DESCRIPTION found.
Imported Objects
IF-MIBDefinitions ----------------------------------------------- IMPORTS InterfaceIndex InterfaceIndexOrZero
SNMPv2-SMICounter32 enterprises Integer32 IpAddress NOTIFICATION-TYPE OBJECT-TYPE Opaque
SNMPv2-TCDisplayString RowStatus TEXTUAL-CONVENTION
OIDNameAccessStatusDescription
1.3.6.1.4.1.119Nodenec
1.3.6.1.4.1.119.2Nodenec-mib
1.3.6.1.4.1.119.2.3NodenecProductDepend
1.3.6.1.4.1.119.2.3.69NoderadioEquipment
1.3.6.1.4.1.119.2.3.69.501NodepasoNeoIpe-common
1.3.6.1.4.1.119.2.3.69.501.3NodealarmStatusGroup
1.3.6.1.4.1.119.2.3.69.501.3.38NodeasLinkAggrGroup
1.3.6.1.4.1.119.2.3.69.501.3.38.1TableasLinkAggrGroupTablenot-accessiblecurrentAlarm/Status for Link Aggregation Group. This table is created automatically when the Link Aggregation Group is defined.
1.3.6.1.4.1.119.2.3.69.501.3.38.1.1RowasLinkAggrGroupEntrynot-accessiblecurrent
1.3.6.1.4.1.119.2.3.69.501.3.38.1.1.1ColumnasLinkAggrGroupIfIndexnot-accessiblecurrentIndex of this table.
1.3.6.1.4.1.119.2.3.69.501.3.38.1.1.2ColumnasLinkAggrGroupNEAddressnot-accessiblecurrentreserved.
1.3.6.1.4.1.119.2.3.69.501.3.38.1.1.3ColumnasLinkAggrGroupLinkStatusread-onlycurrentLink Status for Link Aggregation Group. The all member ports become link down, this state becomes alarm state. But the lower layer is in alarm state, the link …
1.3.6.1.4.1.119.2.3.69.501.3.38.1.1.4ColumnasLinkAggrGroupLLFStatusread-onlycurrentThe status for link loss forwarding. 'force' means the interface is shutting down by the link loss forwarding.
1.3.6.1.4.1.119.2.3.69.501.3.38.1.1.5ColumnasLinkAggrGroupOperStatusread-onlycurrentLink Status for Link Aggregation Group. This object keeps linkDown state, when the lower layer is in alarm state.
1.3.6.1.4.1.119.2.3.69.501.3.38.2TableasLinkAggrPortTablenot-accessiblecurrentThe Link Aggregation Member Port Status. This table is created automatically when a link aggregation group is defined. This table is created per each member po…
1.3.6.1.4.1.119.2.3.69.501.3.38.2.1RowasLinkAggrPortEntrynot-accessiblecurrent
1.3.6.1.4.1.119.2.3.69.501.3.38.2.1.1ColumnasLinkAggrPortGroupIfIndexnot-accessiblecurrentIndex of this table.
1.3.6.1.4.1.119.2.3.69.501.3.38.2.1.2ColumnasLinkAggrPortIfIndexnot-accessiblecurrentIndex of this table.
1.3.6.1.4.1.119.2.3.69.501.3.38.2.1.3ColumnasLinkAggrPortNEAddressnot-accessiblecurrentreserved.
1.3.6.1.4.1.119.2.3.69.501.3.38.2.1.4ColumnasLinkAggrPortStatusread-onlycurrentThe port role of the member port. 'active' means the port forwards/receives the packets on the interface.
1.3.6.1.4.1.119.2.3.69.501.3.38.2.1.5ColumnasLinkAggrPortActorLacpStatusread-onlycurrentA string of 8 bits, corresponding to the current operational values of Actor_State as transmitted by the Actor in LACPDUs.
1.3.6.1.4.1.119.2.3.69.501.3.38.2.1.6ColumnasLinkAggrPortPartnerLacpStatusread-onlycurrentA string of 8 bits, corresponding to the current values of Actor_State in the most recently received LACPDU transmitted by the protocol Partner.
1.3.6.1.4.1.119.2.3.69.501.3.38.2.1.7ColumnasLinkAggrPortLoopDetectread-onlycurrentLACP Control frames loop detect status for that port. This status will be cleared when the condition is not detected for a fixed time.
1.3.6.1.4.1.119.2.3.69.501.3.38.3TableasLinkAggrPortStatsTablenot-accessiblecurrentLink Aggregation Statistics.
1.3.6.1.4.1.119.2.3.69.501.3.38.3.1RowasLinkAggrPortStatsEntrynot-accessiblecurrent
1.3.6.1.4.1.119.2.3.69.501.3.38.3.1.1ColumnasLinkAggrPortStatsIfIndexnot-accessiblecurrentIndex of this table.
1.3.6.1.4.1.119.2.3.69.501.3.38.3.1.2ColumnasLinkAggrPortStatsNEAddressnot-accessiblecurrentreserved.
1.3.6.1.4.1.119.2.3.69.501.3.38.3.1.3ColumnasLinkAggrPortStatsLACPDUsRxread-onlycurrentThe number of valid LACPDUs received on this Aggregation Port.
1.3.6.1.4.1.119.2.3.69.501.3.38.3.1.4ColumnasLinkAggrPortStatsLACPDUsTxread-onlycurrentThe number of LACPDUs transmitted on this Aggregation Port.
1.3.6.1.4.1.119.2.3.69.501.3.38.3.1.5ColumnasLinkAggrPortStatsMarkerPDUsRxread-onlycurrentThe number of valid Marker PDUs received on this Aggregation Port.
1.3.6.1.4.1.119.2.3.69.501.3.38.3.1.6ColumnasLinkAggrPortStatsMarkerRespPDUsRxread-onlycurrentThe number of valid Marker Response PDUs received on this Aggregation Port.
1.3.6.1.4.1.119.2.3.69.501.3.38.3.1.7ColumnasLinkAggrPortStatsMarkerPDUsTxread-onlycurrentThe number of Marker PDUs transmitted on this Aggregation Port.
1.3.6.1.4.1.119.2.3.69.501.3.38.3.1.8ColumnasLinkAggrPortStatsMarkerRespPDUsTxread-onlycurrentThe number of Marker Response PDUs transmitted on this Aggregation Port.
1.3.6.1.4.1.119.2.3.69.501.5NodeprovisioningGroup
1.3.6.1.4.1.119.2.3.69.501.5.38NodeprovLinkAggrGroup
1.3.6.1.4.1.119.2.3.69.501.5.38.1TableprovLinkAggrGroupTablenot-accessiblecurrentLink Aggregation Table. This table controls creation and deletion of link aggregation group.
1.3.6.1.4.1.119.2.3.69.501.5.38.1.1RowprovLinkAggrGroupEntrynot-accessiblecurrent
1.3.6.1.4.1.119.2.3.69.501.5.38.1.1.1ColumnprovLinkAggrGroupIfIndexnot-accessiblecurrentIndex of this table.
1.3.6.1.4.1.119.2.3.69.501.5.38.1.1.2ColumnprovLinkAggrGroupNEAddressnot-accessiblecurrentreserved.
1.3.6.1.4.1.119.2.3.69.501.5.38.1.1.3ColumnprovLinkAggrGroupModeread-createcurrentLink Aggregation Group Mode configuration. When the 'active' is configured, LACPDUs are always sent along with configured links. On the other hand, LACPDUs are…
1.3.6.1.4.1.119.2.3.69.501.5.38.1.1.4ColumnprovLinkAggrGrLacpTxIntervalread-createcurrentThe sending interval of LACPDUs.'short' mode sends LACPDUs in every 1 second. 'long' mode sends LACPDUs in every 30 seconds.
1.3.6.1.4.1.119.2.3.69.501.5.38.1.1.5ColumnprovLinkAggrGroupRevertiveread-createcurrentIndicates the revertive method(When Static mode is enabled)
1.3.6.1.4.1.119.2.3.69.501.5.38.1.1.6ColumnprovLinkAggrGroupTxTyperead-createcurrentA rule of frame transmission among the multiple member ports.
1.3.6.1.4.1.119.2.3.69.501.5.38.1.1.7ColumnprovLinkAggrGroupNameread-createcurrentIndicates the name of Link Aggregation Group
1.3.6.1.4.1.119.2.3.69.501.5.38.1.1.8ColumnprovLinkAggrGroupRowStatusread-createcurrentThis object is used to create and remove the Link Aggregation Group. When creating new Link Aggregation Group, it is necessary to configure at least one member…
1.3.6.1.4.1.119.2.3.69.501.5.38.1.1.9ColumnprovLinkAggrGroupMemberPort1read-createcurrentLink Aggregation Group member Port1
1.3.6.1.4.1.119.2.3.69.501.5.38.1.1.10ColumnprovLinkAggrGroupMemberPort2read-createcurrentLink Aggregation Group member Port2
1.3.6.1.4.1.119.2.3.69.501.5.38.1.1.11ColumnprovLinkAggrGroupMemberPort3read-createcurrentLink Aggregation Group member Port3
1.3.6.1.4.1.119.2.3.69.501.5.38.1.1.12ColumnprovLinkAggrGroupMemberPort4read-createcurrentLink Aggregation Group member Port4
1.3.6.1.4.1.119.2.3.69.501.5.38.1.1.13ColumnprovLinkAggrGroupMemberPort5read-createcurrentLink Aggregation Group member Port5
1.3.6.1.4.1.119.2.3.69.501.5.38.1.1.14ColumnprovLinkAggrGroupMemberPort6read-createcurrentLink Aggregation Group member Port6
1.3.6.1.4.1.119.2.3.69.501.5.38.1.1.15ColumnprovLinkAggrGroupMemberPort7read-createcurrentLink Aggregation Group member Port7
1.3.6.1.4.1.119.2.3.69.501.5.38.1.1.16ColumnprovLinkAggrGroupMemberPort8read-createcurrentLink Aggregation Group member Port8
1.3.6.1.4.1.119.2.3.69.501.5.38.2TableprovLinkAggrPortTablenot-accessiblecurrentThe table configures the link aggregation member port. This table is created automatically by setting interface index to provLinkAggrGroupMemberPort.
1.3.6.1.4.1.119.2.3.69.501.5.38.2.1RowprovLinkAggrPortEntrynot-accessiblecurrent
1.3.6.1.4.1.119.2.3.69.501.5.38.2.1.1ColumnprovLinkAggrPortGroupIfIndexnot-accessiblecurrentIndex of this table.
1.3.6.1.4.1.119.2.3.69.501.5.38.2.1.2ColumnprovLinkAggrPortIfIndexnot-accessiblecurrentIndex of this table.
1.3.6.1.4.1.119.2.3.69.501.5.38.2.1.3ColumnprovLinkAggrPortNEAddressnot-accessiblecurrentreserved.
1.3.6.1.4.1.119.2.3.69.501.5.38.2.1.4ColumnprovLinkAggrPortRoleread-writecurrentPort role configuration. When the Link Aggregation Group operates in static mode, port status is decided by this object. In other operating mode, the configura…
1.3.6.1.4.1.119.2.3.69.501.5.38.3TableprovLinkAggrPortExtTablenot-accessiblecurrentThis table configures the Port priority and is used for internal use only.
1.3.6.1.4.1.119.2.3.69.501.5.38.3.1RowprovLinkAggrPortExtEntrynot-accessiblecurrent
1.3.6.1.4.1.119.2.3.69.501.5.38.3.1.1ColumnprovLinkAggrPortExtGroupIfIndexnot-accessiblecurrentIndex of this table.
1.3.6.1.4.1.119.2.3.69.501.5.38.3.1.2ColumnprovLinkAggrPortExtIfIndexnot-accessiblecurrentIndex of this table.
1.3.6.1.4.1.119.2.3.69.501.5.38.3.1.3ColumnprovLinkAggrPortExtNEAddressnot-accessiblecurrentreserved.
1.3.6.1.4.1.119.2.3.69.501.5.38.3.1.4ColumnprovLinkAggrPortExtPriorityread-writecurrentPort Priority Setting. This object is defined for internal use only. The port priority is configured automatically by its port status.
1.3.6.1.4.1.119.2.3.69.501.5.38.4TableprovLinkAggrEquipmentTablenot-accessiblecurrentThis table configures system parameter for link aggregation function. The table is created when the agent boots up.
1.3.6.1.4.1.119.2.3.69.501.5.38.4.1RowprovLinkAggrEquipmentEntrynot-accessiblecurrent
1.3.6.1.4.1.119.2.3.69.501.5.38.4.1.1ColumnprovLinkAggrEquipmentIndexnot-accessiblecurrentIndex of this table.
1.3.6.1.4.1.119.2.3.69.501.5.38.4.1.2ColumnprovLinkAggrEquipmentNEAddressnot-accessiblecurrentreserved.
1.3.6.1.4.1.119.2.3.69.501.5.38.4.1.3ColumnprovLinkAggrEquipmentSysPriorityread-writecurrentIndicates system Priority
1.3.6.1.4.1.119.2.3.69.501.6NodemaintenanceGroup
1.3.6.1.4.1.119.2.3.69.501.6.38NodemaintLinkAggrGroup
1.3.6.1.4.1.119.2.3.69.501.6.38.1TablemaintLinkAggrGroupTablenot-accessiblecurrentThis table provides revert function per link aggregation group. The function performs re-initialize the lacp port status machine.
1.3.6.1.4.1.119.2.3.69.501.6.38.1.1RowmaintLinkAggrGroupEntrynot-accessiblecurrent
1.3.6.1.4.1.119.2.3.69.501.6.38.1.1.1ColumnmaintLinkAggrGroupIfIndexnot-accessiblecurrentIndex of this table.
1.3.6.1.4.1.119.2.3.69.501.6.38.1.1.2ColumnmaintLinkAggrGroupNEAddressnot-accessiblecurrentreserved.
1.3.6.1.4.1.119.2.3.69.501.6.38.1.1.3ColumnmaintLinkAggrGroupRevertread-writecurrentMaintenance operation for the revertive control
Type Definitions
NameSyntaxStatusDescription
IpeEnableDisableValueINTEGER { invalid(0), disabled(1), enabled(2) }current
SeverityValueINTEGER { cleared(1), indetermine(2), critical(3), major(4), minor(5), warning(6) }currentSeverity (CCITT Rec. X.733)
MIB Viewer