MIB Viewer

IPE-SYSTEM-MIB

545 objects
No module-level DESCRIPTION found.
Imported Objects
BRIDGE-MIBDefinitions ----------------------------------------------- IMPORTS BridgeId Timeout
IF-MIBInterfaceIndex
SNMPv2-SMICounter32 enterprises Integer32 IpAddress NOTIFICATION-TYPE OBJECT-TYPE Opaque
SNMPv2-TCDateAndTime DisplayString MacAddress RowStatus TEXTUAL-CONVENTION
OIDNameAccessStatusDescription
1.3.6.1.4.1.119Nodenec
1.3.6.1.4.1.119.2Nodenec-mib
1.3.6.1.4.1.119.2.3NodenecProductDepend
1.3.6.1.4.1.119.2.3.69NoderadioEquipment
1.3.6.1.4.1.119.2.3.69.1Nodesystem1
1.3.6.1.4.1.119.2.3.69.1.1NodepmSystem
1.3.6.1.4.1.119.2.3.69.1.1.3ScalarsysPmTyperead-onlycurrentPM TYPE SETTING.
1.3.6.1.4.1.119.2.3.69.1.1.5ScalarsysPrimaryIpAddressread-onlycurrentPRIMARY IP ADDRESS.
1.3.6.1.4.1.119.2.3.69.1.1.9ScalarsysOppositeIpAddressread-onlycurrentIP address of the destination.
1.3.6.1.4.1.119.2.3.69.1.1.13ScalarsysEquipmentTyperead-onlycurrentEquipment Type.
1.3.6.1.4.1.119.2.3.69.1.1.14ScalarsysEquipmentConfigread-onlycurrentEquipment Config.
1.3.6.1.4.1.119.2.3.69.5Nodesystem5
1.3.6.1.4.1.119.2.3.69.5.1NodeipeSystemGroup
1.3.6.1.4.1.119.2.3.69.5.1.1TableipeSysInfoTablenot-accessiblecurrentTable of System Information.
1.3.6.1.4.1.119.2.3.69.5.1.1.1RowipeSysInfoEntrynot-accessiblecurrentEntry of System Information.
1.3.6.1.4.1.119.2.3.69.5.1.1.1.1ColumnipeSysInfoIndexnot-accessiblecurrentIndex of this table.
1.3.6.1.4.1.119.2.3.69.5.1.1.1.2ColumnipeSysInfoNEAddressnot-accessiblecurrentreserved.
1.3.6.1.4.1.119.2.3.69.5.1.1.1.3ColumnipeSysNeNameread-onlycurrentEquipment name (for display).
1.3.6.1.4.1.119.2.3.69.5.1.1.1.4ColumnipeSysAreaNameread-onlycurrentArea name (for display).
1.3.6.1.4.1.119.2.3.69.5.1.1.1.5ColumnipeSysNoteread-onlycurrentMemorandum (for display).
1.3.6.1.4.1.119.2.3.69.5.1.1.1.6ColumnipeSysPrimaryIpAddressread-writecurrentPrimary IP Address (for display and setting).
1.3.6.1.4.1.119.2.3.69.5.1.1.1.7ColumnipeSysSubnetMaskread-onlycurrentSubnet mask (for display).
1.3.6.1.4.1.119.2.3.69.5.1.1.1.8ColumnipeSysDefaultGatewayread-onlycurrentDefault gateway (for display).
1.3.6.1.4.1.119.2.3.69.5.1.1.1.9ColumnipeSysMacAddressread-onlycurrentMAC address (for display).
1.3.6.1.4.1.119.2.3.69.5.1.1.1.10ColumnipeSysMibVersionread-onlycurrentMIB version.
1.3.6.1.4.1.119.2.3.69.5.1.1.1.11ColumnipeSysEquipmentTyperead-onlycurrentEquipment type.
1.3.6.1.4.1.119.2.3.69.5.1.1.1.12ColumnipeSysPmTyperead-writecurrentNumber of Branch. 1=normalNE mode. 1!=branchNE mode (2<= ipeSysPmType <= 20).
1.3.6.1.4.1.119.2.3.69.5.1.2TableipeSysInventoryInfoTablenot-accessiblecurrentTable of system basic information.
1.3.6.1.4.1.119.2.3.69.5.1.2.1RowipeSysInventoryInfoEntrynot-accessiblecurrentEntry of system basic information.
1.3.6.1.4.1.119.2.3.69.5.1.2.1.1ColumnipeSysInventoryInfoIndexnot-accessiblecurrentIndex of this table.
1.3.6.1.4.1.119.2.3.69.5.1.2.1.2ColumnipeSysInventoryInfoNEAddressnot-accessiblecurrentreserved.
1.3.6.1.4.1.119.2.3.69.5.1.2.1.3ColumnipeSysInvSoftwareVersionread-onlycurrentSoftware version.
1.3.6.1.4.1.119.2.3.69.5.1.2.1.4ColumnipeSysInvSoftwareReleaseDateread-onlycurrentSoftware update date and time.
1.3.6.1.4.1.119.2.3.69.5.1.2.1.5ColumnipeSysInvDlSoftwareVersionread-onlycurrentDownload control.
1.3.6.1.4.1.119.2.3.69.5.1.2.1.6ColumnipeSysInvOperationSideread-onlycurrentActive side information.
1.3.6.1.4.1.119.2.3.69.5.1.2.1.7ColumnipeSysInvStandbySoftwareVersionread-onlycurrentFirmware version of inactive side.
1.3.6.1.4.1.119.2.3.69.5.1.3NodeipeSysOperationGroup
1.3.6.1.4.1.119.2.3.69.5.1.3.1TableipeSysOpTimeTablenot-accessiblecurrentTable of date and time.
1.3.6.1.4.1.119.2.3.69.5.1.3.1.1RowipeSysOpTimeEntrynot-accessiblecurrentEntry of date and time.
1.3.6.1.4.1.119.2.3.69.5.1.3.1.1.1ColumnipeSysOpTimeIndexnot-accessiblecurrentIndex of this table.
1.3.6.1.4.1.119.2.3.69.5.1.3.1.1.2ColumnipeSysOpTimeNEAddressnot-accessiblecurrentreserved.
1.3.6.1.4.1.119.2.3.69.5.1.3.1.1.3ColumnipeSysOpCurrentTimeread-writecurrentCurrent time.
1.3.6.1.4.1.119.2.3.69.5.1.3.1.1.4ColumnipeSysOpStartTimeread-onlycurrentOS started time.
1.3.6.1.4.1.119.2.3.69.5.1.3.1.1.5ColumnipeSysOpUpTimeread-onlycurrentDuration after OS started (second).
1.3.6.1.4.1.119.2.3.69.5.1.3.2TableipeSysOpFileDownloadTablenot-accessiblecurrentTable of file download.
1.3.6.1.4.1.119.2.3.69.5.1.3.2.1RowipeSysOpFileDownloadEntrynot-accessiblecurrentEntry of file download.
1.3.6.1.4.1.119.2.3.69.5.1.3.2.1.1ColumnipeSysOpFileDownloadIndexnot-accessiblecurrentIndex of this table.
1.3.6.1.4.1.119.2.3.69.5.1.3.2.1.2ColumnipeSysOpFileDownloadNEAddressnot-accessiblecurrentreserved.
1.3.6.1.4.1.119.2.3.69.5.1.3.2.1.3ColumnipeSysOpFileDownloadModuleread-onlycurrentProgram type. *'0:Invalidity' is used as an initial state.
1.3.6.1.4.1.119.2.3.69.5.1.3.2.1.4ColumnipeSysOpFileDownloadCpuResetDetailread-writecurrentCPU reset control. 0:Invalidity 1:revert reset 2:normal reset( without revert ) *'0:Invalidity' is used as an initial state.
1.3.6.1.4.1.119.2.3.69.5.1.3.2.1.5ColumnipeSysOpFileDownloadStatusread-onlycurrentDownload result. 0:Invalidity 1:Completed 2:Failed 3:Executing 4:Suspending *'0:Invalidity' is used as an initial state. *A change state is the following three…
1.3.6.1.4.1.119.2.3.69.5.1.3.2.1.6ColumnipeSysOpFileDownloadCtrlread-writecurrentDownload control. 0:Invalidity 1:Download start 2:Download suspend 3:Upload start 4:Upload end 5:Download reset *'0:Invalidity' is used as an initial state. *'…
1.3.6.1.4.1.119.2.3.69.5.1.3.2.1.7ColumnipeSysOpFileDownloadProtocolTyperead-writecurrentKind of protocol, *'0:Invalidity' is used as an initial state. *Pertinent details: ipeSysOpFileDownloadCtrl
1.3.6.1.4.1.119.2.3.69.5.1.3.3TableipeSysOpProgramPmonRmonClearTablenot-accessiblecurrent
1.3.6.1.4.1.119.2.3.69.5.1.3.3.1RowipeSysOpProgramPmonRmonClearEntrynot-accessiblecurrent
1.3.6.1.4.1.119.2.3.69.5.1.3.3.1.1ColumnipeSysOpProgramPmonRmonClearIndexnot-accessiblecurrentIndex of this table.
1.3.6.1.4.1.119.2.3.69.5.1.3.3.1.2ColumnipeSysOpProgramPmonRmonClearNEAddressnot-accessiblecurrentreserved.
1.3.6.1.4.1.119.2.3.69.5.1.3.3.1.3ColumnipeSysOpProgramPmonRmonClearread-writecurrentPMON data clear control 0:FIXED VALUE 1:REQUEST
1.3.6.1.4.1.119.2.3.69.5.1.3.3.1.4ColumnipeSysOpProgramPmonRmonClearResultread-onlycurrentPMON data clear control response 1:COMPLETED 2:FAILED 3:EXECUTING
1.3.6.1.4.1.119.2.3.69.5.2NodeipeFileSystemGroup
1.3.6.1.4.1.119.2.3.69.5.2.1TableipeFsFileInfoTablenot-accessiblecurrentTable of file information.
1.3.6.1.4.1.119.2.3.69.5.2.1.1RowipeFsFileInfoEntrynot-accessiblecurrentEntry of file information.
1.3.6.1.4.1.119.2.3.69.5.2.1.1.1ColumnipeFsFileInfoIndexnot-accessiblecurrentIndex of this table.
1.3.6.1.4.1.119.2.3.69.5.2.1.1.2ColumnipeFsFileInfoNEAddressnot-accessiblecurrentreserved.
1.3.6.1.4.1.119.2.3.69.5.2.1.1.3ColumnipeFsFileListTyperead-writecurrentType for acquisition 0:Invalidity 1: IDU 2: ODU 3: MODEM Parameter 4: FPGA(Other slot) 5: FPGA(Ctrl) 6: MSE 7: Software Key License 8: Network Config 9: Equipm…
1.3.6.1.4.1.119.2.3.69.5.2.1.1.4ColumnipeFsFileListCurrentread-onlycurrentCurrent file list (Flash-ROM). The list of the type set to ipeFsFileListType is acquired. Form of file list: It's 1 item by 'file name (It included in a path),…
1.3.6.1.4.1.119.2.3.69.5.2.1.1.5ColumnipeFsFileListTempread-onlycurrentTemporary file list (DRAM). The list of the type set to ipeFsFileListType is acquired. Form of file list: It's 1 item by 'file name (It isn't included in a pas…
1.3.6.1.4.1.119.2.3.69.5.2.1.1.6ColumnipeFsUpdateFileDetailread-writecurrentFile update control. Thing to specify object file after it downloads it by 'ipeSysOpFileDownloadCtrl','ipeFsUsbCommand' and to demand file update. Ex) Filename…
1.3.6.1.4.1.119.2.3.69.5.2.1.1.7ColumnipeFsUpdateFileStatusread-onlycurrentUpdate result. 0:Invalidity 1:Success 2:Failed 3:Executing 4:Checking 5:Success but some restricted UserName(s) are ignored *'0:Invalidity' is used as an initi…
1.3.6.1.4.1.119.2.3.69.5.2.1.1.8ColumnipeFsUpdateFileStatusDetailread-onlycurrentUpdate result is detailed. OCT: Update result of each slot 1: Completed 2: Failed The slot for which the current state is used becomes the following. OCT[0] : …
1.3.6.1.4.1.119.2.3.69.5.2.1.1.9ColumnipeFsUpdateFileProgressBaseread-onlycurrentProgress of update (denominator). *Pertinent details: ipeSysOpFileDownloadModule *Pertinent details: ipeFsUpdateFileStatus
1.3.6.1.4.1.119.2.3.69.5.2.1.1.10ColumnipeFsUpdateFileProgressread-onlycurrentProgress of update (molecule). *Pertinent details: ipeSysOpFileDownloadModule *Pertinent details: ipeFsUpdateFileStatus
1.3.6.1.4.1.119.2.3.69.5.2.1.1.11ColumnipeFsUpdateFileUpdateListread-writecurrentDefinition of update slot number. Form of file list: When downloading it to ODU/FPGA/MDPRM, the forwarding site slot number is enumerated by a comma end. Ex) 0…
1.3.6.1.4.1.119.2.3.69.5.2.1.1.12ColumnipeFsUpdateFileConfigPartialread-writecurrentSpecify Equipment Configuration Partial Download pattern. If this object is set with ipeFsUpdateFileDetail, the system will perform the partial download, other…
1.3.6.1.4.1.119.2.3.69.5.2.2TableipeFsUsbInfoTablenot-accessiblecurrentTable of USB memory information.
1.3.6.1.4.1.119.2.3.69.5.2.2.1RowipeFsUsbInfoEntrynot-accessiblecurrentEntry of USB mamory information.
1.3.6.1.4.1.119.2.3.69.5.2.2.1.1ColumnipeFsUsbInfoIndexnot-accessiblecurrentIndex of this table.
1.3.6.1.4.1.119.2.3.69.5.2.2.1.2ColumnipeFsUsbInfoNEAddressnot-accessiblecurrentreserved.
1.3.6.1.4.1.119.2.3.69.5.2.2.1.3ColumnipeFsUsbCommandread-writecurrentUSB control mode/USB file path/Program type specification. [Mode],[Arg1],[Type] Mode:USB control mode 0:DL, 1:UL Arg1:object file path -1 (original file path (…
1.3.6.1.4.1.119.2.3.69.5.2.2.1.4ColumnipeFsUsbProcStatusread-onlycurrentStatus of USB memory control result. The classification of a setting value and the meaning are as follows. 0:Invalidity 1:NORMAL:Normal end 2:NORMAL:Executing …
1.3.6.1.4.1.119.2.3.69.5.2.2.1.5ColumnipeFsUsbListread-onlycurrentFile list format. Form of file list: It's 1 item by 'file name (path from a chroot subordinate),file size,CRC'. Each item is divided at space. *CRC is fixed '0…
1.3.6.1.4.1.119.2.3.69.5.2.2.1.6ColumnipeFsUsbConnectStatusread-onlycurrentStatus of connection USB memory. 1:Connect 2:Not connect
1.3.6.1.4.1.119.2.3.69.5.3NodeipeConfigurationGroup
1.3.6.1.4.1.119.2.3.69.5.3.1TableipeCfgSystemTablenot-accessiblecurrentTable of System Item Information.
1.3.6.1.4.1.119.2.3.69.5.3.1.1RowipeCfgSystemEntrynot-accessiblecurrentEntry of System Item Information.
1.3.6.1.4.1.119.2.3.69.5.3.1.1.1ColumnipeCfgSystemIndexnot-accessiblecurrentIndex of this table.
1.3.6.1.4.1.119.2.3.69.5.3.1.1.2ColumnipeCfgSystemNEAddressnot-accessiblecurrentreserved.
1.3.6.1.4.1.119.2.3.69.5.3.1.1.3ColumnipeCfgNeNameread-writecurrentPASOLINK unit name. White space characters are not allowed for head or tail of characters.
1.3.6.1.4.1.119.2.3.69.5.3.1.1.4ColumnipeCfgAreaNameread-writecurrentArea name. White space characters are not allowed for head or tail of characters.
1.3.6.1.4.1.119.2.3.69.5.3.1.1.5ColumnipeCfgMemoread-writecurrentMemorandum. White space characters are not allowed for head or tail of characters.
1.3.6.1.4.1.119.2.3.69.5.3.2TableipeCfgOemTablenot-accessiblecurrentTable of Equipment Item Information.
1.3.6.1.4.1.119.2.3.69.5.3.2.1RowipeCfgOemEntrynot-accessiblecurrentEntry of Equipment Item Information.
1.3.6.1.4.1.119.2.3.69.5.3.2.1.1ColumnipeCfgOemIndexnot-accessiblecurrentIndex of this table.
1.3.6.1.4.1.119.2.3.69.5.3.2.1.2ColumnipeCfgOemNEAddressnot-accessiblecurrentreserved.
1.3.6.1.4.1.119.2.3.69.5.3.2.1.3ColumnipeCfgOemSysDescrread-writecurrentSystem Description. The space of the begininng and end dose not permit it.
1.3.6.1.4.1.119.2.3.69.5.3.2.1.4ColumnipeCfgOemSysContactread-writecurrentSystem contact. The space of the begininng and end dose not permit it.
1.3.6.1.4.1.119.2.3.69.5.3.2.1.5ColumnipeCfgOemSysNameread-writecurrentSystem name. The space of the begininng and end dose not permit it.
1.3.6.1.4.1.119.2.3.69.5.3.2.1.6ColumnipeCfgOemSysLocationread-writecurrentSystem location. The space of the begininng and end dose not permit it.
1.3.6.1.4.1.119.2.3.69.5.3.3NodeipeCfgAux
1.3.6.1.4.1.119.2.3.69.5.3.3.1TableipeCfgAuxInTablenot-accessiblecurrentAux Input Table
1.3.6.1.4.1.119.2.3.69.5.3.3.1.1RowipeCfgAuxInEntrynot-accessiblecurrent
1.3.6.1.4.1.119.2.3.69.5.3.3.1.1.1ColumnipeCfgAuxInIndexnot-accessiblecurrentIndex of this table.
1.3.6.1.4.1.119.2.3.69.5.3.3.1.1.2ColumnipeCfgAuxInNEAddressnot-accessiblecurrentreserved.
1.3.6.1.4.1.119.2.3.69.5.3.3.1.1.3ColumnipeCfgAuxInItemNameread-writecurrentItem Name
1.3.6.1.4.1.119.2.3.69.5.3.3.1.1.4ColumnipeCfgAuxInItemTyperead-writecurrentItem Type
1.3.6.1.4.1.119.2.3.69.5.3.3.1.1.5ColumnipeCfgAuxInOpenStateread-writecurrentStatus Strings (Event Off (Open))
1.3.6.1.4.1.119.2.3.69.5.3.3.1.1.6ColumnipeCfgAuxInCloseStateread-writecurrentStatus Strings (Event On (Close))
1.3.6.1.4.1.119.2.3.69.5.3.3.1.1.7ColumnipeCfgAuxInSeverityread-writecurrentSeverity (X.733)
1.3.6.1.4.1.119.2.3.69.5.3.3.1.1.8ColumnipeCfgAuxInAlarmTyperead-writecurrentAlarm Type (X.733)
1.3.6.1.4.1.119.2.3.69.5.3.3.1.1.9ColumnipeCfgAuxInProbableCauseread-writecurrentProbable Cause (X.733)
1.3.6.1.4.1.119.2.3.69.5.3.3.2TableipeCfgAuxOutTablenot-accessiblecurrentAUX Output Table
1.3.6.1.4.1.119.2.3.69.5.3.3.2.1RowipeCfgAuxOutEntrynot-accessiblecurrent
1.3.6.1.4.1.119.2.3.69.5.3.3.2.1.1ColumnipeCfgAuxOutIndexnot-accessiblecurrentIndex of this table.
1.3.6.1.4.1.119.2.3.69.5.3.3.2.1.2ColumnipeCfgAuxOutNEAddressnot-accessiblecurrentreserved.
1.3.6.1.4.1.119.2.3.69.5.3.3.2.1.3ColumnipeCfgAuxOutItemNameread-writecurrentItem Name
1.3.6.1.4.1.119.2.3.69.5.3.3.2.1.4ColumnipeCfgAuxOutOpenStateread-writecurrentStatus Strings (Event Off (Open))
1.3.6.1.4.1.119.2.3.69.5.3.3.2.1.5ColumnipeCfgAuxOutCloseStateread-writecurrentStatus Strings (Event On (Close))
1.3.6.1.4.1.119.2.3.69.5.3.4NodeipeCfgNtp
1.3.6.1.4.1.119.2.3.69.5.3.4.1TableipeCfgNtpServiceTablenot-accessiblecurrentTable of NTP configuration information.
1.3.6.1.4.1.119.2.3.69.5.3.4.1.1RowipeCfgNtpServiceEntrynot-accessiblecurrentEntry of NTP configuration information.
1.3.6.1.4.1.119.2.3.69.5.3.4.1.1.1ColumnipeCfgNtpServiceIndexnot-accessiblecurrentIndex of this table.
1.3.6.1.4.1.119.2.3.69.5.3.4.1.1.2ColumnipeCfgNtpServiceNEAddressnot-accessiblecurrentreserved.
1.3.6.1.4.1.119.2.3.69.5.3.4.1.1.3ColumnipeCfgNtpServiceEnableread-writecurrentNTP control enable.
1.3.6.1.4.1.119.2.3.69.5.3.4.1.1.4ColumnipeCfgNtpServerModeread-writecurrentNTP server mode.
1.3.6.1.4.1.119.2.3.69.5.3.4.1.1.5ColumnipeCfgNtpClientModeread-writecurrentNTP client mode.
1.3.6.1.4.1.119.2.3.69.5.3.4.1.1.6ColumnipeCfgNtpServerStratumread-writecurrentNTP Stratum.
1.3.6.1.4.1.119.2.3.69.5.3.4.1.1.7ColumnipeCfgNtpServerMulticastPortread-writecurrentNTP server multicast port.
1.3.6.1.4.1.119.2.3.69.5.3.4.1.1.8ColumnipeCfgNtpServerMulticastIntervalTimeread-writecurrentValue of NTP multicast polling time.
1.3.6.1.4.1.119.2.3.69.5.3.4.2TableipeCfgNtpServerTablenot-accessiblecurrentTable of NTP server information.
1.3.6.1.4.1.119.2.3.69.5.3.4.2.1RowipeCfgNtpServerEntrynot-accessiblecurrentEntry of NTP server information.
1.3.6.1.4.1.119.2.3.69.5.3.4.2.1.1ColumnipeCfgNtpServerIndexnot-accessiblecurrentIndex of this table.
1.3.6.1.4.1.119.2.3.69.5.3.4.2.1.2ColumnipeCfgNtpServerNEAddressnot-accessiblecurrentreserved.
1.3.6.1.4.1.119.2.3.69.5.3.4.2.1.3ColumnipeCfgNtpServerAddressread-writecurrentIP Address of NTP server.
1.3.6.1.4.1.119.2.3.69.5.3.4.2.1.4ColumnipeCfgNtpVersionread-writecurrentVersion of supported NTP message.
1.3.6.1.4.1.119.2.3.69.5.3.4.2.1.5ColumnipeCfgNtpPollTimeread-writecurrentNTP Polling Time, in seconds as a power of two. For instance, a value of six indicates a interval of 64 seconds. Note) The value less than 6 is rejected by the…
1.3.6.1.4.1.119.2.3.69.5.3.7NodeipeCfgFtp
1.3.6.1.4.1.119.2.3.69.5.3.7.1TableipeCfgFtpServerTablenot-accessiblecurrentTable of FTP server configuration information.
1.3.6.1.4.1.119.2.3.69.5.3.7.1.1RowipeCfgFtpServerEntrynot-accessiblecurrentEntry of FTP server configuration information.
1.3.6.1.4.1.119.2.3.69.5.3.7.1.1.1ColumnipeCfgFtpServerIndexnot-accessiblecurrentIndex of this table.
1.3.6.1.4.1.119.2.3.69.5.3.7.1.1.2ColumnipeCfgFtpServerNEAddressnot-accessiblecurrentreserved.
1.3.6.1.4.1.119.2.3.69.5.3.7.1.1.3ColumnipeCfgFtpServerEnableread-writecurrentFTP control enable.
1.3.6.1.4.1.119.2.3.69.5.3.7.1.1.4ColumnipeCfgFtpServerCommandTcpPortread-writecurrentPort number of FTP command.
1.3.6.1.4.1.119.2.3.69.5.3.7.1.1.5ColumnipeCfgFtpServerDataTcpPortread-writecurrentPort number of FTP data transfer.
1.3.6.1.4.1.119.2.3.69.5.3.7.1.1.6ColumnipeCfgFtpServerMaxSessionread-writecurrentNumber of max connections.
1.3.6.1.4.1.119.2.3.69.5.3.7.1.1.7ColumnipeCfgFtpServerAutoDisableread-writecurrentFTP automatic stop control enable.
1.3.6.1.4.1.119.2.3.69.5.3.8NodeipeCfgSftp
1.3.6.1.4.1.119.2.3.69.5.3.8.1TableipeCfgSftpServerTablenot-accessiblecurrentTable of SFTP server configuration information.
1.3.6.1.4.1.119.2.3.69.5.3.8.1.1RowipeCfgSftpServerEntrynot-accessiblecurrentEntry of SFTP server configuration information.
1.3.6.1.4.1.119.2.3.69.5.3.8.1.1.1ColumnipeCfgSftpServerIndexnot-accessiblecurrentIndex of this table.
1.3.6.1.4.1.119.2.3.69.5.3.8.1.1.2ColumnipeCfgSftpServerNEAddressnot-accessiblecurrentreserved.
1.3.6.1.4.1.119.2.3.69.5.3.8.1.1.3ColumnipeCfgSftpServerEnableread-writecurrentSFTP control enable.
1.3.6.1.4.1.119.2.3.69.5.3.8.1.1.4ColumnipeCfgSftpServerAutoDisableread-writecurrentSFTP automatic stop control enable.
1.3.6.1.4.1.119.2.3.69.5.3.9NodeipeCfgHttp
1.3.6.1.4.1.119.2.3.69.5.3.9.1TableipeCfgHttpServerTablenot-accessiblecurrentTable of HTTP configuration information.
1.3.6.1.4.1.119.2.3.69.5.3.9.1.1RowipeCfgHttpServerEntrynot-accessiblecurrentEntry of HTTP configuration information.
1.3.6.1.4.1.119.2.3.69.5.3.9.1.1.1ColumnipeCfgHttpServerIndexnot-accessiblecurrentIndex of this table.
1.3.6.1.4.1.119.2.3.69.5.3.9.1.1.2ColumnipeCfgHttpServerNEAddressnot-accessiblecurrentreserved.
1.3.6.1.4.1.119.2.3.69.5.3.9.1.1.3ColumnipeCfgHttpServerEnableread-writecurrentHTTP control enable.
1.3.6.1.4.1.119.2.3.69.5.3.9.1.1.4ColumnipeCfgHttpServerTcpPortread-writecurrentPort number of HTTP.
1.3.6.1.4.1.119.2.3.69.5.3.10NodeipeCfgHttps
1.3.6.1.4.1.119.2.3.69.5.3.10.1TableipeCfgHttpsServerTablenot-accessiblecurrentTable of HTTPS configuration information.
1.3.6.1.4.1.119.2.3.69.5.3.10.1.1RowipeCfgHttpsServerEntrynot-accessiblecurrentEntry of HTTPS configuration information.
1.3.6.1.4.1.119.2.3.69.5.3.10.1.1.1ColumnipeCfgHttpsServerIndexnot-accessiblecurrentIndex of this table.
1.3.6.1.4.1.119.2.3.69.5.3.10.1.1.2ColumnipeCfgHttpsServerNEAddressnot-accessiblecurrentreserved.
1.3.6.1.4.1.119.2.3.69.5.3.10.1.1.3ColumnipeCfgHttpsServerEnableread-writecurrentHTTPS control enable.
1.3.6.1.4.1.119.2.3.69.5.3.10.1.1.4ColumnipeCfgHttpsServerTcpPortread-writecurrentTCP port number of HTTPS.
1.3.6.1.4.1.119.2.3.69.5.3.11NodeipeCfgSnmp
1.3.6.1.4.1.119.2.3.69.5.3.11.1TableipeCfgSnmpServerTablenot-accessiblecurrentA table of SNMP configuration information.
1.3.6.1.4.1.119.2.3.69.5.3.11.1.1RowipeCfgSnmpServerEntrynot-accessiblecurrentA set of SNMP configuration information.
1.3.6.1.4.1.119.2.3.69.5.3.11.1.1.1ColumnipeCfgSnmpServerIndexnot-accessiblecurrentIndex of this table.
1.3.6.1.4.1.119.2.3.69.5.3.11.1.1.2ColumnipeCfgSnmpServerNEAddressnot-accessiblecurrentreserved.
1.3.6.1.4.1.119.2.3.69.5.3.11.1.1.3ColumnipeCfgSnmpV1V2cEnableread-writecurrentIndicates the SNMP entity is permitted to receive & process SNMPv1/v2c PDU or is not permitted to do. Even if it is disabled, SNMPv1/v2c Traps is sent.
1.3.6.1.4.1.119.2.3.69.5.3.11.1.1.4ColumnipeCfgSnmpV3Enableread-writecurrentIndicates the SNMP entity is permitted to receive & process SNMPv3 PDU or is not permitted to do. Even if it is disabled, SNMPv3 Traps is sent.
1.3.6.1.4.1.119.2.3.69.5.3.11.1.1.5ColumnipeCfgSnmpServerPortread-writecurrentA UDP port number to receive all SNMP Request-PDU. The reboot of the system is necessary to reflect setting.
1.3.6.1.4.1.119.2.3.69.5.3.11.2TableipeCfgSnmpCommunityTablenot-accessiblecurrentA table of SNMP community information.
1.3.6.1.4.1.119.2.3.69.5.3.11.2.1RowipeCfgSnmpCommunityEntrynot-accessiblecurrentA set of SNMP community information.
1.3.6.1.4.1.119.2.3.69.5.3.11.2.1.1ColumnipeCfgSnmpCommunityIndexnot-accessiblecurrentIndex of this table.
1.3.6.1.4.1.119.2.3.69.5.3.11.2.1.2ColumnipeCfgSnmpCommunityNEAddressnot-accessiblecurrentreserved.
1.3.6.1.4.1.119.2.3.69.5.3.11.2.1.3ColumnipeCfgSnmpCommunityNameread-createcurrentThis entity's community name. Please use ASCII code. The characters which can be used are '-', '_','0'-'9', 'a'-'z' and 'A'-'Z'.
1.3.6.1.4.1.119.2.3.69.5.3.11.2.1.4ColumnipeCfgSnmpCommunityAccessLevelread-createcurrentA access level of a connection using this entry's community name.
1.3.6.1.4.1.119.2.3.69.5.3.11.2.1.5ColumnipeCfgSnmpCommunityAccessAddressread-createcurrentAn address which is permitted to use this entry's community name. When masking in ipeCfgSnmpCommunityAccessPrefixLength, the host address part has to be a zero…
1.3.6.1.4.1.119.2.3.69.5.3.11.2.1.6ColumnipeCfgSnmpCommunityAccessPrefixLengthread-createcurrentA prefix length of ipeCfgSnmpCommunityAccessAddress.
1.3.6.1.4.1.119.2.3.69.5.3.11.2.1.7ColumnipeCfgSnmpCommunityRowStatusread-createcurrentThis RowStatus has a status only active(1). You can SET only createAndGo(4) or Destroy(6). 1) how to create To create a new row, you must SET objects indicated…
1.3.6.1.4.1.119.2.3.69.5.3.11.3TableipeCfgSnmpTrapTablenot-accessiblecurrentA table of notification information.
1.3.6.1.4.1.119.2.3.69.5.3.11.3.1RowipeCfgSnmpTrapEntrynot-accessiblecurrentA set of notification information.
1.3.6.1.4.1.119.2.3.69.5.3.11.3.1.1ColumnipeCfgSnmpTrapEntryIndexnot-accessiblecurrentIndex of this table.
1.3.6.1.4.1.119.2.3.69.5.3.11.3.1.2ColumnipeCfgSnmpTrapEntryNEAddressnot-accessiblecurrentreserved.
1.3.6.1.4.1.119.2.3.69.5.3.11.3.1.3ColumnipeCfgSnmpTrapVersionread-createcurrentA version of this entry's notification.
1.3.6.1.4.1.119.2.3.69.5.3.11.3.1.4ColumnipeCfgSnmpTrapNotifyTyperead-createcurrentA notification type of this entry's notification.
1.3.6.1.4.1.119.2.3.69.5.3.11.3.1.5ColumnipeCfgSnmpTrapTargetAddressread-createcurrentDestination IP address of this entry's notification. The following address can't be used. 127.0.0.0/8 Loopback 0.0.0.0/0 Current network 224.0.0.0/4 Multicasts…
1.3.6.1.4.1.119.2.3.69.5.3.11.3.1.6ColumnipeCfgSnmpTrapTargetPortread-createcurrentDestination UDP port this entry's notification.
1.3.6.1.4.1.119.2.3.69.5.3.11.3.1.7ColumnipeCfgSnmpTrapSecurityNameread-createcurrentA security name. The meaning is different depending on ipeCfgSnmpTrapVersion. v1/v2c : It's meaning a community name. v3 : It's meaning a user name. Please use…
1.3.6.1.4.1.119.2.3.69.5.3.11.3.1.8ColumnipeCfgSnmpTrapSecurityLevelread-createcurrentA security level of this entry's notification. When ipeCfgSnmpTrapVersion is v1(1) or v2c(2), you have to SET noAuthNoPriv(1).
1.3.6.1.4.1.119.2.3.69.5.3.11.3.1.9ColumnipeCfgSnmpTrapEngineIdread-createcurrentA snmpEngineID which this entry's notification uses.(5-32 octet) ipeCfgSnmpTrapNotifyType is effective only at the time of inform(2). A snmpEngineID of a desti…
1.3.6.1.4.1.119.2.3.69.5.3.11.3.1.10ColumnipeCfgSnmpTrapAuthAlgorithmread-createcurrentAuthentication protocol. ipeCfgSnmpTrapNotifyType is effective for the SET only at the time of inform(2). Even if it is done SET in the case of trap(1), I am i…
1.3.6.1.4.1.119.2.3.69.5.3.11.3.1.11ColumnipeCfgSnmpTrapAuthKeyread-createcurrentAuthenticate password for SNMP inform PDU. This object expects encrypted password by blowfish, not original password. Therefore, the size of this object is not…
1.3.6.1.4.1.119.2.3.69.5.3.11.3.1.12ColumnipeCfgSnmpTrapPrivAlgorithmread-createcurrentprivacy protocol. ipeCfgSnmpTrapNotifyType is effective for the SET only at the time of inform(2). Even if it is done SET in the case of trap(1), I am ignored.…
1.3.6.1.4.1.119.2.3.69.5.3.11.3.1.13ColumnipeCfgSnmpTrapPrivKeyread-createcurrentPrivacy password for SNMP inform PDU. This object expects encrypted password by blowfish, not original password. Therefore, the size of this object is not same…
1.3.6.1.4.1.119.2.3.69.5.3.11.3.1.14ColumnipeCfgSnmpTrapRowStatusread-createcurrentThis RowStatus has a status only active(1). You can SET only createAndGo(4) or destroy(6). 1) how to create 1.1) SNMPv1/v2c To create a new row, you must SET o…
1.3.6.1.4.1.119.2.3.69.5.3.12NodeipeCfgAccount
1.3.6.1.4.1.119.2.3.69.5.3.12.1TableipeCfgAccountUserInfoTablenot-accessiblecurrentTable of user Information.
1.3.6.1.4.1.119.2.3.69.5.3.12.1.1RowipeCfgAccountUserInfoEntrynot-accessiblecurrentEntry of user information.
1.3.6.1.4.1.119.2.3.69.5.3.12.1.1.1ColumnipeCfgAccountUserIndexnot-accessiblecurrentIndex of this table.
1.3.6.1.4.1.119.2.3.69.5.3.12.1.1.2ColumnipeCfgAccountUserNEAddressnot-accessiblecurrentreserved.
1.3.6.1.4.1.119.2.3.69.5.3.12.1.1.3ColumnipeCfgAccountUserNameread-createcurrentUser Name. An overlap of a user name isn't permitted. Please use ASCII code. The characters which can be used are '-', '_','0'-'9', 'a'-'z' and 'A'-'Z'.
1.3.6.1.4.1.119.2.3.69.5.3.12.1.1.4ColumnipeCfgAccountUserKeyread-createcurrentUser password encrypted by blowfish. Acceptable characters for this object is shown below. '-', '_','0'-'9', 'a'-'z' and 'A'-'Z'.
1.3.6.1.4.1.119.2.3.69.5.3.12.1.1.5ColumnipeCfgAccountUserGroupread-createcurrentThis object defines the privilege for the user. Acceptable characters for this object is shown below. '-', '_','0'-'9', 'a'-'z' and 'A'-'Z'.
1.3.6.1.4.1.119.2.3.69.5.3.12.1.1.6ColumnipeCfgAccountUserSnmpV3SecurityLevelread-createcurrentSNMPv3 security level. Setting for SET/GET/TRAP at the time of the SNMPv3 use(INFORM is inapplicable)
1.3.6.1.4.1.119.2.3.69.5.3.12.1.1.7ColumnipeCfgAccountUserSnmpV3AuthAlgorithmread-createcurrentHash calculate algorithm of authenticate password. Setting for SET/GET/TRAP at the time of the SNMPv3 use(INFORM is inapplicable)
1.3.6.1.4.1.119.2.3.69.5.3.12.1.1.8ColumnipeCfgAccountUserSnmpV3AuthKeyread-createcurrentAuthenticate password for SNMP SET/GET/TRAP PDU. This object expects encrypted password by blowfish, not original password. Therefore, the size of this object …
1.3.6.1.4.1.119.2.3.69.5.3.12.1.1.9ColumnipeCfgAccountUserSnmpV3PrivAlgorithmread-createcurrentCipher algorithm. Setting for SET/GET/TRAP at the time of the SNMPv3 use(INFORM is inapplicable)
1.3.6.1.4.1.119.2.3.69.5.3.12.1.1.10ColumnipeCfgAccountUserSnmpV3PrivKeyread-createcurrentPrivacy password for SNMP SET/GET/TRAP PDU. This object expects encrypted password by blowfish, not original password. Therefore, the size of this object is no…
1.3.6.1.4.1.119.2.3.69.5.3.12.1.1.11ColumnipeCfgAccountUserRowStatusread-createcurrentThis RowStatus has a status only active(1). 1) creating a entry When you make a new entry, you must SET objects indicated below. ipeCfgAccountUserIndex ipeCfgA…
1.3.6.1.4.1.119.2.3.69.5.3.12.2TableipeCfgAccountGroupInfoTablenot-accessiblecurrentTable of Group Information.
1.3.6.1.4.1.119.2.3.69.5.3.12.2.1RowipeCfgAccountGroupInfoEntrynot-accessiblecurrentEntry of Group Information.
1.3.6.1.4.1.119.2.3.69.5.3.12.2.1.1ColumnipeCfgAccountGroupIndexnot-accessiblecurrentIndex of this table.
1.3.6.1.4.1.119.2.3.69.5.3.12.2.1.2ColumnipeCfgAccountGroupNEAddressnot-accessiblecurrentreserved.
1.3.6.1.4.1.119.2.3.69.5.3.12.2.1.3ColumnipeCfgAccountGroupNameread-createcurrentGroup name. An overlap of a group name isn't permitted. Please use ASCII code. The characters which can be used are '-', '_','0'-'9', 'a'-'z' and 'A'-'Z'.
1.3.6.1.4.1.119.2.3.69.5.3.12.2.1.4ColumnipeCfgAccountGroupTelnetread-createcurrentTELNET enable.
1.3.6.1.4.1.119.2.3.69.5.3.12.2.1.5ColumnipeCfgAccountGroupSshread-createcurrentSSH enable.
1.3.6.1.4.1.119.2.3.69.5.3.12.2.1.6ColumnipeCfgAccountGroupFtpread-createcurrentFTP enable.
1.3.6.1.4.1.119.2.3.69.5.3.12.2.1.7ColumnipeCfgAccountGroupSftpread-createcurrentSFTP enable.
1.3.6.1.4.1.119.2.3.69.5.3.12.2.1.8ColumnipeCfgAccountGroupHttpread-createcurrentHTTP enable.
1.3.6.1.4.1.119.2.3.69.5.3.12.2.1.9ColumnipeCfgAccountGroupHttpsread-createcurrentHTTPS enable.
1.3.6.1.4.1.119.2.3.69.5.3.12.2.1.10ColumnipeCfgAccountGroupSnmpread-createcurrentSNMP enable.
1.3.6.1.4.1.119.2.3.69.5.3.12.2.1.11ColumnipeCfgAccountGroupAccessLevelread-createcurrentAccess level.
1.3.6.1.4.1.119.2.3.69.5.3.12.2.1.12ColumnipeCfgAccountGroupRowStatusread-createcurrentThis RowStatus has a status only 'active(1)'. 1) creating a entry. When you make a new entry, you must SET objects indicated below. ipeCfgAccountGroupName ipeC…
1.3.6.1.4.1.119.2.3.69.5.3.12.4TableipeCfgUserAccountAuthTablenot-accessiblecurrentConfigure user authentication method about Web LCT.
1.3.6.1.4.1.119.2.3.69.5.3.12.4.1RowipeCfgUserAccountAuthEntrynot-accessiblecurrent...
1.3.6.1.4.1.119.2.3.69.5.3.12.4.1.1ColumnipeCfgUserAccountAuthIndexnot-accessiblecurrentIndex of this table.
1.3.6.1.4.1.119.2.3.69.5.3.12.4.1.2ColumnipeCfgUserAccountAuthNEAddressnot-accessiblecurrentReserved object for northbound interface.
1.3.6.1.4.1.119.2.3.69.5.3.12.4.1.3ColumnipeCfgUserAccountAuthModeread-writecurrentIndicate the user authentication mode. mode1 : local authentication only. mode2 : local and LDAP authentication. (NOT SUPPORTED) mode3 : local and RADIUS authe…
1.3.6.1.4.1.119.2.3.69.5.3.12.4.1.4ColumnipeCfgUserAccountAuthOrderread-writecurrentIndicate the user authentication order. This object is effective only if ipeCfgUserAccountAuthMode is set to mode2 or mode3. External authentication means auth…
1.3.6.1.4.1.119.2.3.69.5.3.12.4.1.5ColumnipeCfgUserAccountAuthTrapEnableread-writecurrentEnable or disable user login trap. In case this object is set to enable, the system sends trap when user attempt to login to Web LCT.
1.3.6.1.4.1.119.2.3.69.5.3.12.4.1.6ColumnipeCfgUserAccountAuthTrapLocalread-onlycurrentIndicate authentication result of local authentication. This object is dedicated for login control trap. If you read this object, the system returns invalid(0).
1.3.6.1.4.1.119.2.3.69.5.3.12.4.1.7ColumnipeCfgUserAccountAuthTrapExternalread-onlycurrentIndicate authentication result of externel authentication. This object is dedicated for login control trap. If you read this object, the system returns invalid…
1.3.6.1.4.1.119.2.3.69.5.3.13NodeipeCfgDhcpGroup
1.3.6.1.4.1.119.2.3.69.5.3.13.1TableipeCfgDhcpServerTablenot-accessiblecurrentDHCPserver table.
1.3.6.1.4.1.119.2.3.69.5.3.13.1.1RowipeCfgDhcpServerEntrynot-accessiblecurrententry of DHCPserver table.
1.3.6.1.4.1.119.2.3.69.5.3.13.1.1.1ColumnipeCfgDhcpServerIndexnot-accessiblecurrentIndex of this table.
1.3.6.1.4.1.119.2.3.69.5.3.13.1.1.2ColumnipeCfgDhcpServerNEAddressnot-accessiblecurrentreserved.
1.3.6.1.4.1.119.2.3.69.5.3.13.1.1.3ColumnipeCfgDhcpServerEnableread-writecurrentEffective/invalid setting of DHCP. value range:start(1) stop(2) restart(3) DHCPD has already started. When the start is specified, DHCPD restart.
1.3.6.1.4.1.119.2.3.69.5.3.13.1.1.4ColumnipeCfgDhcpLeaseAddrRangeBeginread-writecurrentBeginning IPaddress within the range of lease address. value range:Dotted decimal notation denial value:0.0.0.0 , 127.0.0.1 , 255.255.255.255 ipeCfgDhcpLeaseAd…
1.3.6.1.4.1.119.2.3.69.5.3.13.1.1.5ColumnipeCfgDhcpLeaseAddrRangeEndread-writecurrentEnd IPaddress within the range of lease address. value range:Dotted decimal notation denial value:0.0.0.0 , 127.0.0.1 , 255.255.255.255 ipeCfgDhcpLeaseAddrRang…
1.3.6.1.4.1.119.2.3.69.5.3.14NodeipeCfgStpGroup
1.3.6.1.4.1.119.2.3.69.5.3.14.1TableipeCfgStpBridgeTablenot-accessiblecurrentSTP state setting table.
1.3.6.1.4.1.119.2.3.69.5.3.14.1.1RowipeCfgStpBridgeEntrynot-accessiblecurrententry of STP state setting table.
1.3.6.1.4.1.119.2.3.69.5.3.14.1.1.1ColumnipeCfgStpBridgeIndexnot-accessiblecurrentIndex of this table.
1.3.6.1.4.1.119.2.3.69.5.3.14.1.1.2ColumnipeCfgStpBridgeNEAddressnot-accessiblecurrentreserved.
1.3.6.1.4.1.119.2.3.69.5.3.14.1.1.3ColumnipeCfgStpEnableread-writecurrentEffective/invalid setting of STP. value :enabled disabled
1.3.6.1.4.1.119.2.3.69.5.3.14.1.1.4ColumnipeCfgStpPriorityread-writecurrentBridge priority. value range:0 to 65535
1.3.6.1.4.1.119.2.3.69.5.3.14.1.1.5ColumnipeCfgStpBridgeMaxAgeread-writecurrentMaxAge (in units of hundredths of a second). value range:600 to 4000 rule: 2 * (ipeCfgStpBridgeForwardDelay - 1) => ipeCfgStpBridgeMaxAge ipeCfgStpBridgeMaxAge…
1.3.6.1.4.1.119.2.3.69.5.3.14.1.1.6ColumnipeCfgStpBridgeHelloTimeread-writecurrentHelloTime (in units of hundredths of a second). value range:100 to 1000 rule:ipeCfgStpBridgeMaxAge >= 2x(ipeCfgStpBridgeHelloTime + 1)
1.3.6.1.4.1.119.2.3.69.5.3.14.1.1.7ColumnipeCfgStpBridgeForwardDelayread-writecurrentForwardDelay (in units of hundredths of a second). value range:400 to 3000 rule: 2 * (ipeCfgStpBridgeForwardDelay - 1) >= ipeCfgStpBridgeMaxAge
1.3.6.1.4.1.119.2.3.69.5.3.14.2TableipeCfgStpPortTablenot-accessiblecurrentSTP port information table.
1.3.6.1.4.1.119.2.3.69.5.3.14.2.1RowipeCfgStpPortEntrynot-accessiblecurrententry of STP port information table.
1.3.6.1.4.1.119.2.3.69.5.3.14.2.1.1ColumnipeCfgStpPortIfIndexnot-accessiblecurrentIndex of this table.
1.3.6.1.4.1.119.2.3.69.5.3.14.2.1.2ColumnipeCfgStpPortNEAddressnot-accessiblecurrentreserved.
1.3.6.1.4.1.119.2.3.69.5.3.14.2.1.3ColumnipeCfgStpPortPriorityread-writecurrentPort priority. value range:0 to 63
1.3.6.1.4.1.119.2.3.69.5.3.14.2.1.4ColumnipeCfgStpPortPathCostread-writecurrentPathcost. value range:1 to 65535
1.3.6.1.4.1.119.2.3.69.5.3.14.2.1.5ColumnipeCfgStpPortEdgeEnableread-writecurrentEffective/invalid setting of BPDU. value range:enabled(1) disabled(2)
1.3.6.1.4.1.119.2.3.69.5.3.15NodeipeCfgPortGroup
1.3.6.1.4.1.119.2.3.69.5.3.15.1TableipeCfgPortModemTablenot-accessiblecurrentMODEM port set up information table.
1.3.6.1.4.1.119.2.3.69.5.3.15.1.1RowipeCfgPortModemEntrynot-accessiblecurrententry of MODEM port set up information table.
1.3.6.1.4.1.119.2.3.69.5.3.15.1.1.1ColumnipeCfgPortModemIfIndexnot-accessiblecurrentIndex of this table.
1.3.6.1.4.1.119.2.3.69.5.3.15.1.1.2ColumnipeCfgPortModemNEAddressnot-accessiblecurrentreserved.
1.3.6.1.4.1.119.2.3.69.5.3.15.1.1.3ColumnipeCfgPortModemEnableread-writecurrentEffective/invalid setting of MODEM port. value range: enabled(1) disabled(2)
1.3.6.1.4.1.119.2.3.69.5.3.15.2TableipeCfgPortLctTablenot-accessiblecurrentLCT port set up information table.
1.3.6.1.4.1.119.2.3.69.5.3.15.2.1RowipeCfgPortLctEntrynot-accessiblecurrententry of LCT port set up information table.
1.3.6.1.4.1.119.2.3.69.5.3.15.2.1.1ColumnipeCfgPortLctIfIndexnot-accessiblecurrentIndex of this table.
1.3.6.1.4.1.119.2.3.69.5.3.15.2.1.2ColumnipeCfgPortLctNEAddressnot-accessiblecurrentreserved.
1.3.6.1.4.1.119.2.3.69.5.3.15.2.1.3ColumnipeCfgPortLctIpAddressread-writecurrentIPaddress of LCT port. It makes an error of the Internet Protocol address setting that overlaps in the port in the device. The object port and the range of the…
1.3.6.1.4.1.119.2.3.69.5.3.15.2.1.4ColumnipeCfgPortLctNetMaskread-writecurrentSubnet mask of LCT port. When it isn't proper as subnetmask, it'll be an error. Value range:0x00000000-0xfffffffc(0-30bit)
1.3.6.1.4.1.119.2.3.69.5.3.15.2.1.5ColumnipeCfgPortLctEnableread-writecurrentEffective/invalid setting of LCT port. value range: enabled disabled
1.3.6.1.4.1.119.2.3.69.5.3.15.2.1.6ColumnipeCfgPortLctMturead-writecurrentMTU value of LCT. value range:256 to 1500
1.3.6.1.4.1.119.2.3.69.5.3.15.2.1.7ColumnipeCfgPortLctAutoNegread-writecurrentEffective/invalid setting of LCT AUTO NEGOTIATION. value range: enabled disabled
1.3.6.1.4.1.119.2.3.69.5.3.15.3TableipeCfgPortEtherTablenot-accessiblecurrentNMS/NE1 port set up information table.
1.3.6.1.4.1.119.2.3.69.5.3.15.3.1RowipeCfgPortEtherEntrynot-accessiblecurrententry of NMS/NE1 port set up information table.
1.3.6.1.4.1.119.2.3.69.5.3.15.3.1.1ColumnipeCfgPortEtherIfIndexnot-accessiblecurrentIndex of this table.
1.3.6.1.4.1.119.2.3.69.5.3.15.3.1.2ColumnipeCfgPortEtherNEAddressnot-accessiblecurrentreserved.
1.3.6.1.4.1.119.2.3.69.5.3.15.3.1.3ColumnipeCfgPortEtherEnableread-writecurrentEffective/invalid setting of NMS/NE1 port. value range: enabled(1) disabled(2)
1.3.6.1.4.1.119.2.3.69.5.3.15.3.1.4ColumnipeCfgPortEtherAutoNegread-writecurrentAuto negotiation invalid effective/setting of NMS/NE1 port. value range: enabled(1) disabled(2)
1.3.6.1.4.1.119.2.3.69.5.3.15.3.1.5ColumnipeCfgPortEtherSpecialFilterread-writecurrentSetting of whether a special broadcast packet is blocked.
1.3.6.1.4.1.119.2.3.69.5.3.15.3.1.6ColumnipeCfgPortEtherLldpModeread-writecurrentSwitch to select MAC address of LLDP Frame. standardMode : MAC address of LLDP Frame is 01-80-C2-00-00-0E. proprietaryMode : MAC address of LLDP Frame is confi…
1.3.6.1.4.1.119.2.3.69.5.3.15.4TableipeCfgPortNe2Tablenot-accessiblecurrentNE2 port set up information table.
1.3.6.1.4.1.119.2.3.69.5.3.15.4.1RowipeCfgPortNe2Entrynot-accessiblecurrententry of NE2 port set up information table.
1.3.6.1.4.1.119.2.3.69.5.3.15.4.1.1ColumnipeCfgPortNe2IfIndexnot-accessiblecurrentIndex of this table.
1.3.6.1.4.1.119.2.3.69.5.3.15.4.1.2ColumnipeCfgPortNe2NEAddressnot-accessiblecurrentreserved.
1.3.6.1.4.1.119.2.3.69.5.3.15.4.1.3ColumnipeCfgPortNe2IpAddressread-writecurrentNE2 port IP Address. value range:0x00000000 - 0xdfffffff(0.0.0.0 - 223.255.255.255) The ppp function is restarted when setting it.
1.3.6.1.4.1.119.2.3.69.5.3.15.4.1.4ColumnipeCfgPortNe2Enableread-writecurrentNE2 port enable. value range:enabled(1) disabled(2)
1.3.6.1.4.1.119.2.3.69.5.3.15.4.1.5ColumnipeCfgPortNe2Speedread-writecurrentNE2 port baud rate. value range:9600bps(9600) 19200bps(19200) The ppp function is restarted when setting it.
1.3.6.1.4.1.119.2.3.69.5.3.15.4.1.6ColumnipeCfgPortNe2NeighborMibEnableread-writecurrentNE2 port neighbor detection enable. value range:enabled(1) disabled(2) The ppp function is restarted when setting it.
1.3.6.1.4.1.119.2.3.69.5.3.15.5TableipeCfgPortE1Tablenot-accessiblecurrentE1 port set up information table.
1.3.6.1.4.1.119.2.3.69.5.3.15.5.1RowipeCfgPortE1Entrynot-accessiblecurrententry of E1 port set up information table.
1.3.6.1.4.1.119.2.3.69.5.3.15.5.1.1ColumnipeCfgPortE1IfIndexnot-accessiblecurrentIndex of this table.
1.3.6.1.4.1.119.2.3.69.5.3.15.5.1.2ColumnipeCfgPortE1NEAddressnot-accessiblecurrentreserved.
1.3.6.1.4.1.119.2.3.69.5.3.15.5.1.3ColumnipeCfgPortE1Enableread-writecurrentEffective/invalid setting of E1 port. value range: enabled(1) disabled(2)
1.3.6.1.4.1.119.2.3.69.5.3.15.5.1.4ColumnipeCfgPortE1ChannelNumberread-writecurrentUse channel of E1 port. value range:1 to 16
1.3.6.1.4.1.119.2.3.69.5.3.15.6TableipeCfgPortInbandTablenot-accessiblecurrentInBand Management VLAN port set up information table.
1.3.6.1.4.1.119.2.3.69.5.3.15.6.1RowipeCfgPortInbandEntrynot-accessiblecurrententry of INBAND Management VLAN port set up information table.
1.3.6.1.4.1.119.2.3.69.5.3.15.6.1.1ColumnipeCfgPortInbandIfIndexnot-accessiblecurrentIndex of this table.
1.3.6.1.4.1.119.2.3.69.5.3.15.6.1.2ColumnipeCfgPortInbandNEAddressnot-accessiblecurrentreserved.
1.3.6.1.4.1.119.2.3.69.5.3.15.6.1.3ColumnipeCfgPortInbandIpAddressread-writeobsoleteIPaddress of INBAND Management VLAN port. It makes an error of the Internet Protocol address setting that overlaps in the port in the device. The object port a…
1.3.6.1.4.1.119.2.3.69.5.3.15.6.1.4ColumnipeCfgPortInbandNetMaskread-writeobsoleteSubnet mask of INBAND Management VLAN port. When it isn't proper as subnetmask, it'll be an error. Value range:0x00000000 - 0xfffffffc(0 - 30bit)
1.3.6.1.4.1.119.2.3.69.5.3.15.6.1.5ColumnipeCfgPortInbandEnableread-writecurrentEffective/invalid setting of INBAND Management VLAN port. value range: enabled(1) disabled(2)
1.3.6.1.4.1.119.2.3.69.5.3.15.6.1.6ColumnipeCfgPortInbandVlanIdread-writecurrentVLAN ID of INBAND Management VLAN port. value range:1 to 4094
1.3.6.1.4.1.119.2.3.69.5.3.15.6.1.7ColumnipeCfgPortInbandMturead-writeobsoleteMTU value of INBAND Management VLAN port. value range:256 to 1500
1.3.6.1.4.1.119.2.3.69.5.3.15.6.1.8ColumnipeCfgPortInbandCosread-writecurrentCoS value of INBAND Management VLAN port
1.3.6.1.4.1.119.2.3.69.5.3.15.7TableipeCfgPortMainEtherTablenot-accessiblecurrentMain traffic ether port set up information table.
1.3.6.1.4.1.119.2.3.69.5.3.15.7.1RowipeCfgPortMainEtherEntrynot-accessiblecurrententry of main traffic ether port set up information table.
1.3.6.1.4.1.119.2.3.69.5.3.15.7.1.1ColumnipeCfgPortMainEtherIfIndexnot-accessiblecurrentIndex of this table.
1.3.6.1.4.1.119.2.3.69.5.3.15.7.1.2ColumnipeCfgPortMainEtherNEAddressnot-accessiblecurrentreserved.
1.3.6.1.4.1.119.2.3.69.5.3.15.7.1.3ColumnipeCfgPortMainEtherLldpModeread-writecurrentSwitch to select MAC address of LLDP Frame. standardMode : MAC address of LLDP Frame is 01-80-C2-00-00-0E. proprietaryMode : MAC address of LLDP Frame is confi…
1.3.6.1.4.1.119.2.3.69.5.3.16NodeipeCfgBridgeGroup
1.3.6.1.4.1.119.2.3.69.5.3.16.1TableipeCfgBridgeTablenot-accessiblecurrentBridge set up information table.
1.3.6.1.4.1.119.2.3.69.5.3.16.1.1RowipeCfgBridgeEntrynot-accessiblecurrententry of Bridge set up information table.
1.3.6.1.4.1.119.2.3.69.5.3.16.1.1.1ColumnipeCfgBridgeIndexnot-accessiblecurrentIndex of this table.
1.3.6.1.4.1.119.2.3.69.5.3.16.1.1.2ColumnipeCfgBridgeNEAddressnot-accessiblecurrentreserved.
1.3.6.1.4.1.119.2.3.69.5.3.16.1.1.3ColumnipeCfgBridgeIpAddressread-writecurrentIPAddress set to bridge. Value range:0x00000000 - 0xdfffffff(0.0.0.0 - 223.255.255.255) It makes an error of the Internet Protocol address setting that overlap…
1.3.6.1.4.1.119.2.3.69.5.3.16.1.1.4ColumnipeCfgBridgeNetMaskread-writecurrentNetmask set to bridge. When it isn't proper as subnetmask, it'll be an error. Value range:0x00000000 - 0xfffffffc(0 - 30bit) There can not be relation and it s…
1.3.6.1.4.1.119.2.3.69.5.3.16.1.1.5ColumnipeCfgBridgeMturead-writecurrentMTU value of bridge. value range:256 to 1500 There can not be relation and it sets, and it refer the number of branch.
1.3.6.1.4.1.119.2.3.69.5.3.16.2TableipeCfgBridgePortTablenot-accessiblecurrentBridge set up information table.
1.3.6.1.4.1.119.2.3.69.5.3.16.2.1RowipeCfgBridgePortEntrynot-accessiblecurrententry of Bridge set up information table.
1.3.6.1.4.1.119.2.3.69.5.3.16.2.1.1ColumnipeCfgBridgePortIfIndexnot-accessiblecurrentIndex of this table.
1.3.6.1.4.1.119.2.3.69.5.3.16.2.1.2ColumnipeCfgBridgePortNEAddressnot-accessiblecurrentreserved.
1.3.6.1.4.1.119.2.3.69.5.3.16.2.1.3ColumnipeCfgBridgePortBridgeIndexread-writecurrentIndex value of bridge.
1.3.6.1.4.1.119.2.3.69.5.3.17NodeipeCfgPripGroup
1.3.6.1.4.1.119.2.3.69.5.3.17.1TableipeCfgPripTablenot-accessiblecurrentPRIP set up information table.
1.3.6.1.4.1.119.2.3.69.5.3.17.1.1RowipeCfgPripEntrynot-accessiblecurrententry of PRIP set up information table.
1.3.6.1.4.1.119.2.3.69.5.3.17.1.1.1ColumnipeCfgPripIndexnot-accessiblecurrentIndex of this table.
1.3.6.1.4.1.119.2.3.69.5.3.17.1.1.2ColumnipeCfgPripNEAddressnot-accessiblecurrentreserved.
1.3.6.1.4.1.119.2.3.69.5.3.17.1.1.3ColumnipeCfgPripRouteEnableread-writecurrentEnable or disables PRIP. enabled(1):PRIP is enabled. disabled(2):PRIP is disabled.
1.3.6.1.4.1.119.2.3.69.5.3.17.1.1.4ColumnipeCfgPripUdpPortread-writecurrentSetting of UDP port number used with PRIP. Either of 8520 or 520 is set. This setting is valid since PRIP will start next time.
1.3.6.1.4.1.119.2.3.69.5.3.17.2TableipeCfgPripPortTablenot-accessiblecurrentPRIP set up information table.(per port)
1.3.6.1.4.1.119.2.3.69.5.3.17.2.1RowipeCfgPripPortEntrynot-accessiblecurrententry of PRIP set up information table.(per port)
1.3.6.1.4.1.119.2.3.69.5.3.17.2.1.1ColumnipeCfgPripPortIfIndexnot-accessiblecurrentIndex of this table.
1.3.6.1.4.1.119.2.3.69.5.3.17.2.1.2ColumnipeCfgPripPortNEAddressnot-accessiblecurrentreserved.
1.3.6.1.4.1.119.2.3.69.5.3.17.2.1.3ColumnipeCfgPripPortEnableread-writecurrentSetting of some port when PRIP will be enabled. enabled(1) : this port is enabled. disabled(2) : this port is disable.
1.3.6.1.4.1.119.2.3.69.5.3.17.2.1.4ColumnipeCfgPripPortPropagateNetEnableread-writecurrentPropagate setting for neighbor NE. enabled(1) : this port is propagated. disabled(2) : this port is not propagated. (Do not register in the RIP route.)
1.3.6.1.4.1.119.2.3.69.5.3.18NodeipeCfgNaptGroup
1.3.6.1.4.1.119.2.3.69.5.3.18.1TableipeCfgNaptTablenot-accessiblecurrentNAPT set up information table.
1.3.6.1.4.1.119.2.3.69.5.3.18.1.1RowipeCfgNaptEntrynot-accessiblecurrententry of NAPT set up information table.
1.3.6.1.4.1.119.2.3.69.5.3.18.1.1.1ColumnipeCfgNaptIndexnot-accessiblecurrentIndex of this table.
1.3.6.1.4.1.119.2.3.69.5.3.18.1.1.2ColumnipeCfgNaptNEAddressnot-accessiblecurrentreserved.
1.3.6.1.4.1.119.2.3.69.5.3.18.1.1.3ColumnipeCfgNaptEnableread-writecurrentAddress translation invalid effective/setting by NAPT. value range: enabled disabled
1.3.6.1.4.1.119.2.3.69.5.3.19NodeipeCfgStaticRouteGroup
1.3.6.1.4.1.119.2.3.69.5.3.19.1TableipeCfgStaticRouteTablenot-accessiblecurrentStatic Routing set up information table.
1.3.6.1.4.1.119.2.3.69.5.3.19.1.1RowipeCfgStaticRouteEntrynot-accessiblecurrententry of Static Routing set up information table.
1.3.6.1.4.1.119.2.3.69.5.3.19.1.1.1ColumnipeCfgRouteIndexnot-accessiblecurrentIndex of this table.
1.3.6.1.4.1.119.2.3.69.5.3.19.1.1.2ColumnipeCfgRouteNEAddressnot-accessiblecurrentreserved.
1.3.6.1.4.1.119.2.3.69.5.3.19.1.1.3ColumnipeCfgRouteDestread-createcurrentStatic routing object destination address. When masking in ipeCfgRouteMask, the host address part has to be a zero, if any. Value range:0x00000000-0xdfffffff(0…
1.3.6.1.4.1.119.2.3.69.5.3.19.1.1.4ColumnipeCfgRouteMaskread-createcurrentStatic routing object subnet mask. When it isn't proper as subnetmask, it'll be an error. Value range:0x00000000-0xffffffff(0-32bit) Only when ipeCfgRouteDest …
1.3.6.1.4.1.119.2.3.69.5.3.19.1.1.5ColumnipeCfgRouteNextHopread-createcurrentStatic routing object gateway address. Value range:0x00000001 - 0xdfffffff(0.0.0.1 - 223.255.255.255) The value acquisition when unsetting it returns NoSuchObj…
1.3.6.1.4.1.119.2.3.69.5.3.19.1.1.6ColumnipeCfgRouteRowStatusread-createcurrentThis RowStatus has a status only 'active(1)'. 1) creating a entry When you make a new entry, you must SET objects indicated below. * ipeCfgRouteDest * ipeCfgRo…
1.3.6.1.4.1.119.2.3.69.5.3.21NodeipeCfgAccessListGroup
1.3.6.1.4.1.119.2.3.69.5.3.21.1TableipeCfgAccessListRuleTablenot-accessiblecurrentTable of Access List(Rule).
1.3.6.1.4.1.119.2.3.69.5.3.21.1.1RowipeCfgAccessListRuleEntrynot-accessiblecurrentEntry of Access List(Rule).
1.3.6.1.4.1.119.2.3.69.5.3.21.1.1.1ColumnipeCfgAccessListRuleEnableIndexnot-accessiblecurrentIndex of this table.
1.3.6.1.4.1.119.2.3.69.5.3.21.1.1.2ColumnipeCfgAccessListRuleNEAddressnot-accessiblecurrentreserved.
1.3.6.1.4.1.119.2.3.69.5.3.21.1.1.3ColumnipeCfgAccessListInputRuleEnableread-writecurrentIP Access Control Input Filter Rule
1.3.6.1.4.1.119.2.3.69.5.3.21.1.1.4ColumnipeCfgAccessListForwardRuleEnableread-writecurrentIP Access Control Forwarding Filter Rule
1.3.6.1.4.1.119.2.3.69.5.3.21.1.1.5ColumnipeCfgAccessListInputDefaultActionread-writecurrentIP Access Control Input Default Action.
1.3.6.1.4.1.119.2.3.69.5.3.21.1.1.6ColumnipeCfgAccessListForwardDefaultActionread-writecurrentIP Access Control Forwarding Default Action
1.3.6.1.4.1.119.2.3.69.5.3.21.2TableipeCfgAccessListInputTablenot-accessiblecurrentTable of Access List(Input Direction).
1.3.6.1.4.1.119.2.3.69.5.3.21.2.1RowipeCfgAccessListInputEntrynot-accessiblecurrentEntry of Access List(Input Direction).
1.3.6.1.4.1.119.2.3.69.5.3.21.2.1.1ColumnipeCfgAccessListInputOrderNumnot-accessiblecurrentIndex of table(1-50).
1.3.6.1.4.1.119.2.3.69.5.3.21.2.1.2ColumnipeCfgAccessListInputNEAddressnot-accessiblecurrentreserved.
1.3.6.1.4.1.119.2.3.69.5.3.21.2.1.3ColumnipeCfgAccessListInputInIfIndexread-createcurrentIP Access Control Input Filter Interface. The value 'inband' is not supported.
1.3.6.1.4.1.119.2.3.69.5.3.21.2.1.4ColumnipeCfgAccessListInputSrcIpAddressread-createcurrentIP Access Control Input Filter Source IP Address
1.3.6.1.4.1.119.2.3.69.5.3.21.2.1.5ColumnipeCfgAccessListInputSrcNetMaskread-createcurrentIP Access Control Input Filter Source Subnet Mask. '0.0.0.0' matches all IP addresses. i.e. '0.0.0.0' acts as 'Any'.
1.3.6.1.4.1.119.2.3.69.5.3.21.2.1.6ColumnipeCfgAccessListInputProtocolread-createcurrentIP Access Control Input Filter Protocol. '-1' acts as 'Any'.
1.3.6.1.4.1.119.2.3.69.5.3.21.2.1.7ColumnipeCfgAccessListInputDstPortNumread-createcurrentIP Access Control Input Filter Port Number. '-1' acts as 'Any'.
1.3.6.1.4.1.119.2.3.69.5.3.21.2.1.8ColumnipeCfgAccessListInputActionread-createcurrentIP Access Control Input Filter Action.
1.3.6.1.4.1.119.2.3.69.5.3.21.2.1.9ColumnipeCfgAccessListInputRowStatusread-createcurrentThis RowStatus has a status only 'active(1)'. 1) creating a entry When you make a new entry, you must SET objects indicated below. ipeCfgAccessListInputAction …
1.3.6.1.4.1.119.2.3.69.5.3.21.3TableipeCfgAccessListForwardTablenot-accessiblecurrentTable of Access List(Forward Direction).
1.3.6.1.4.1.119.2.3.69.5.3.21.3.1RowipeCfgAccessListForwardEntrynot-accessiblecurrentEntry of Access List(Forward Direction).
1.3.6.1.4.1.119.2.3.69.5.3.21.3.1.1ColumnipeCfgAccessListForwardOrderNumnot-accessiblecurrentIndex of table(1-50).
1.3.6.1.4.1.119.2.3.69.5.3.21.3.1.2ColumnipeCfgAccessListForwardNEAddressnot-accessiblecurrentreserved.
1.3.6.1.4.1.119.2.3.69.5.3.21.3.1.3ColumnipeCfgAccessListForwardInIfIndexread-createcurrentIP Access Control Forward Filter Input
1.3.6.1.4.1.119.2.3.69.5.3.21.3.1.4ColumnipeCfgAccessListForwardOutIfIndexread-createcurrentIP Access Control Forward Filter Output Interface. The value 'inband' is not supporte
1.3.6.1.4.1.119.2.3.69.5.3.21.3.1.5ColumnipeCfgAccessListForwardSrcIpAddressread-createcurrentIP Access Control Forward Filter Source IP Address.
1.3.6.1.4.1.119.2.3.69.5.3.21.3.1.6ColumnipeCfgAccessListForwardSrcNetMaskread-createcurrentIP Access Control Forward Filter Source Subnet Mask. '0.0.0.0' matches all IP addresses. i.e. '0.0.0.0' acts as 'Any'
1.3.6.1.4.1.119.2.3.69.5.3.21.3.1.7ColumnipeCfgAccessListForwardDstIpAddressread-createcurrentIP Access Control Forward Filter Destination IP Address.
1.3.6.1.4.1.119.2.3.69.5.3.21.3.1.8ColumnipeCfgAccessListForwardDstNetMaskread-createcurrentIP Access Control Forward Filter Destination Subnet Mask. '0.0.0.0' matches all IP addresses. i.e. '0.0.0.0' acts as 'Any'.
1.3.6.1.4.1.119.2.3.69.5.3.21.3.1.9ColumnipeCfgAccessListForwardProtocolread-createcurrentIP Access Control Forward Filter Protocol. '-1' acts as 'Any'.
1.3.6.1.4.1.119.2.3.69.5.3.21.3.1.10ColumnipeCfgAccessListForwardSrcPortNumread-createcurrentIP Access Control Forward Filter Source Port Number. '-1' acts as 'Any'.
1.3.6.1.4.1.119.2.3.69.5.3.21.3.1.11ColumnipeCfgAccessListForwardDstPortNumread-createcurrentIP Access Control Forward Filter Destination Port Number. '-1' acts as 'Any'.
1.3.6.1.4.1.119.2.3.69.5.3.21.3.1.12ColumnipeCfgAccessListForwardActionread-createcurrentIP Access Control Forward Filter Action.
1.3.6.1.4.1.119.2.3.69.5.3.21.3.1.13ColumnipeCfgAccessListForwardRowStatusread-createcurrentThis RowStatus has a status only 'active(1)'. 1) creating a entry When you make a new entry, you must SET objects indicated below. ipeCfgAccessListForwardActio…
1.3.6.1.4.1.119.2.3.69.5.3.22NodeipeCfgAutoIpGroup
1.3.6.1.4.1.119.2.3.69.5.3.22.1TableipeCfgAutoIpTablenot-accessiblecurrentTable of AutoIP configuration information.
1.3.6.1.4.1.119.2.3.69.5.3.22.1.1RowipeCfgAutoIpEntrynot-accessiblecurrentEntry of AutoIP configuration information.
1.3.6.1.4.1.119.2.3.69.5.3.22.1.1.1ColumnipeCfgAutoIpIndexnot-accessiblecurrentIndex of this table.
1.3.6.1.4.1.119.2.3.69.5.3.22.1.1.2ColumnipeCfgAutoIpNEAddressnot-accessiblecurrentreserved.
1.3.6.1.4.1.119.2.3.69.5.3.22.1.1.3ColumnipeCfgAutoIpNetworkAddressread-writecurrentAggregation Net of AutoIP. A set value becomes a binary. Value range:0x00000000-0xdfffffff(0.0.0.0-223.255.255.255) If this value is changed in state of 'now s…
1.3.6.1.4.1.119.2.3.69.5.3.22.1.1.4ColumnipeCfgAutoIpNetMaskread-writecurrentAggregation NetMask of AutoIp. A set value becomes a binary. Value range:0x80000000-0xfffffffc(1-30bit) If this value is changed in state of 'now setting' or '…
1.3.6.1.4.1.119.2.3.69.5.3.25TableipeCfgSysNE1PortTablenot-accessiblecurrentNE1 Port Mode Configuration Table.
1.3.6.1.4.1.119.2.3.69.5.3.25.1RowipeCfgSysNE1PortEntrynot-accessiblecurrent
1.3.6.1.4.1.119.2.3.69.5.3.25.1.1ColumnipeCfgSysNE1PortIndexnot-accessiblecurrentIndex of this table.
1.3.6.1.4.1.119.2.3.69.5.3.25.1.2ColumnipeCfgSysNE1PortNEAddressnot-accessiblecurrentreserved.
1.3.6.1.4.1.119.2.3.69.5.3.25.1.3ColumnipeCfgSysNE1PortModeread-writecurrentNE1 Port Mode Configuration
1.3.6.1.4.1.119.2.3.69.5.3.27NodeipeCfgRadiusGroup
1.3.6.1.4.1.119.2.3.69.5.3.27.1TableipeCfgRadiusGeneralTablenot-accessiblecurrentConfigure RADIUS parameters.
1.3.6.1.4.1.119.2.3.69.5.3.27.1.1RowipeCfgRadiusGeneralEntrynot-accessiblecurrent...
1.3.6.1.4.1.119.2.3.69.5.3.27.1.1.1ColumnipeCfgRadiusGeneralIndexnot-accessiblecurrentIndex of this table.
1.3.6.1.4.1.119.2.3.69.5.3.27.1.1.2ColumnipeCfgRadiusGeneralNEAddressnot-accessiblecurrentReserved object for northbound interface.
1.3.6.1.4.1.119.2.3.69.5.3.27.1.1.3ColumnipeCfgRadiusGeneralAuthClientRetransmitread-writecurrentIndicate maximum retransmit number of Access-Request message. The system retransmits Access-Request message to server according to this configuration.
1.3.6.1.4.1.119.2.3.69.5.3.27.1.1.4ColumnipeCfgRadiusGeneralAuthClientTimeoutread-writecurrentIndicate timeout period for response to Access-Request message. In case response (Access-Accept message) is not received in this period, the system will retran…
1.3.6.1.4.1.119.2.3.69.5.3.27.2TableipeCfgRadiusAuthServerExtTablenot-accessiblecurrentConfigure RADIUS authentication server parameters.
1.3.6.1.4.1.119.2.3.69.5.3.27.2.1RowipeCfgRadiusAuthServerExtEntrynot-accessiblecurrent...
1.3.6.1.4.1.119.2.3.69.5.3.27.2.1.1ColumnipeCfgRadiusAuthServerExtIndexnot-accessiblecurrentIndex of this table.
1.3.6.1.4.1.119.2.3.69.5.3.27.2.1.2ColumnipeCfgRadiusAuthServerNEAddressnot-accessiblecurrentReserved object for northbound interface.
1.3.6.1.4.1.119.2.3.69.5.3.27.2.1.3ColumnipeCfgRadiusAuthServerAddressTyperead-createcurrentIndicate IP address type of this server. ipv4 : server has IPv4 address. ipv6 : server has IPv6 address. (NOT SUPPORTED) ipv6 will be supprted in future versio…
1.3.6.1.4.1.119.2.3.69.5.3.27.2.1.4ColumnipeCfgRadiusAuthServerAddressread-createcurrentIndicate IP address of this server.
1.3.6.1.4.1.119.2.3.69.5.3.27.2.1.5ColumnipeCfgRadiusAuthClientServerPortNumberread-createcurrentIndicate port number of RADIUS authentication protocol on this server.
1.3.6.1.4.1.119.2.3.69.5.3.27.2.1.6ColumnipeCfgRadiusAuthClientPasswordTyperead-createcurrentIndicate password authentication type. The system select password attribute on Access-Request message. user : use User-Password attribute. chap : use CHAP-Pass…
1.3.6.1.4.1.119.2.3.69.5.3.27.2.1.7ColumnipeCfgRadiusAuthClientSecretKeyread-createcurrentIndicate RADIUS shared secret encrypted by blowfish. This object is used to confirm received RADIUS message is sent from authenticated server. This object is a…
1.3.6.1.4.1.119.2.3.69.5.3.27.2.1.8ColumnipeCfgRadiusAuthServerExtRowStatusread-createcurrentThe row status of this table.
1.3.6.1.4.1.119.2.3.69.5.3.27.3TableipeCfgRadiusPrivLevelGeneralTablenot-accessiblecurrentConfigure general privilege level for RADIUS authetication.
1.3.6.1.4.1.119.2.3.69.5.3.27.3.1RowipeCfgRadiusPrivLevelGeneralEntrynot-accessiblecurrent...
1.3.6.1.4.1.119.2.3.69.5.3.27.3.1.1ColumnipeCfgRadiusPrivLevelGeneralIndexnot-accessiblecurrentIndex of this table.
1.3.6.1.4.1.119.2.3.69.5.3.27.3.1.2ColumnipeCfgRadiusPrivLevelGeneralNEAddressnot-accessiblecurrentReserved object for northbound interface.
1.3.6.1.4.1.119.2.3.69.5.3.27.3.1.3ColumnipeCfgRadiusPrivLevelGeneralDefaultActionread-writecurrentIndicate system default action in case privilege level is not specified on Access-Accept message or received privilege level is set to disable in ipeCfgRadiusG…
1.3.6.1.4.1.119.2.3.69.5.3.27.3.1.4ColumnipeCfgRadiusPrivLevelGeneralDefaultGroupread-writecurrentIndicate default group in case privilege level is not specified. This object is effective only if ipeCfgRadiusPrivLevelGeneralDefaultAction is useDefaultGroup.…
1.3.6.1.4.1.119.2.3.69.5.3.27.4TableipeCfgRadiusGroupPrivLevelMappingTablenot-accessiblecurrentConfigure privilege level mapping for RADIUS authentication.
1.3.6.1.4.1.119.2.3.69.5.3.27.4.1RowipeCfgRadiusGroupPrivLevelMappingEntrynot-accessiblecurrent...
1.3.6.1.4.1.119.2.3.69.5.3.27.4.1.1ColumnipeCfgRadiusGroupPrivLevelMappingPrivLevelnot-accessiblecurrentThe index of this table. The value corresponds to received privilege level on Access-Accept message.
1.3.6.1.4.1.119.2.3.69.5.3.27.4.1.2ColumnipeCfgRadiusGroupPrivLevelMappingNEAddressnot-accessiblecurrentReserved object for northbound interface.
1.3.6.1.4.1.119.2.3.69.5.3.27.4.1.3ColumnipeCfgRadiusGroupPrivLevelMappingEnableread-writecurrentEnable or disable privilege level mapping on this privilege level. disable : privilege level mapping is disabled. enable : privilege level mapping is enabled. …
1.3.6.1.4.1.119.2.3.69.5.3.27.4.1.4ColumnipeCfgRadiusGroupPrivLevelMappingGroupread-writecurrentIndicate group name correspond to privilege level. This object is effective only if ipeCfgRadiusGroupPrivLevelMappingEnable is enable. When the system received…
1.3.6.1.4.1.119.2.3.69.5.3.28NodeipeCfgLldpGroup
1.3.6.1.4.1.119.2.3.69.5.3.28.1TableipeCfgLldpTablenot-accessiblecurrentLLDP set up information table.
1.3.6.1.4.1.119.2.3.69.5.3.28.1.1RowipeCfgLldpEntrynot-accessiblecurrententry of LLDP set up information table.
1.3.6.1.4.1.119.2.3.69.5.3.28.1.1.1ColumnipeCfgLldpIndexnot-accessiblecurrentIndex of this table.
1.3.6.1.4.1.119.2.3.69.5.3.28.1.1.2ColumnipeCfgLldpNEAddressnot-accessiblecurrentreserved.
1.3.6.1.4.1.119.2.3.69.5.3.28.1.1.3ColumnipeCfgLldpProprietaryModeMacAddressread-writecurrentMAC address of LLDP Frame in NEC mode. This object is effective only if ipeCfgPortXXXXXLldpMode is set to proprietaryMode.
1.3.6.1.4.1.119.2.3.69.5.4NodeipeCommunicationsGroup
1.3.6.1.4.1.119.2.3.69.5.4.1TableipeNeighborInfoTablenot-accessiblecurrentNeighbor NE table.
1.3.6.1.4.1.119.2.3.69.5.4.1.1RowipeNeighborInfoEntrynot-accessiblecurrentNeighbor NE entry.
1.3.6.1.4.1.119.2.3.69.5.4.1.1.1ColumnipeNeighborInfoIndexnot-accessiblecurrentIndex of this table.
1.3.6.1.4.1.119.2.3.69.5.4.1.1.2ColumnipeNeighborInfoNEAddressnot-accessiblecurrentreserved.
1.3.6.1.4.1.119.2.3.69.5.4.1.1.3ColumnipeNeighborIpAddressread-onlycurrent[iPASOLINK200/400/1000series/EX/iX] Neighbor NE is displayed as unit of registration every eight bytes of Internet Protocol address (4byte) + Node TYPE(4byte).…
1.3.6.1.4.1.119.2.3.69.5.6NodeipeStatusGroup
1.3.6.1.4.1.119.2.3.69.5.6.1NodeipeStsNtp
1.3.6.1.4.1.119.2.3.69.5.6.1.1TableipeStsNtpStatisticsTablenot-accessiblecurrentTable of NTP statistics.
1.3.6.1.4.1.119.2.3.69.5.6.1.1.1RowipeStsNtpStatisticsEntrynot-accessiblecurrentEntry of NTP statistics.
1.3.6.1.4.1.119.2.3.69.5.6.1.1.1.1ColumnipeStsNtpStatisticsIndexnot-accessiblecurrentIndex of this table.
1.3.6.1.4.1.119.2.3.69.5.6.1.1.1.2ColumnipeStsNtpStatisticsNEAddressnot-accessiblecurrentreserved.
1.3.6.1.4.1.119.2.3.69.5.6.1.1.1.3ColumnipeStsNtpSyncStatusInforead-onlycurrentSynchronous state information.
1.3.6.1.4.1.119.2.3.69.5.6.1.1.1.4ColumnipeStsNtpSetTimeread-onlycurrentPresence of time manual setting.
1.3.6.1.4.1.119.2.3.69.5.6.2NodeipeStsFtp
1.3.6.1.4.1.119.2.3.69.5.6.2.1TableipeStsFtpStatusTablenot-accessiblecurrentTable of FTP status.
1.3.6.1.4.1.119.2.3.69.5.6.2.1.1RowipeStsFtpStatusEntrynot-accessiblecurrentEntry of FTP status.
1.3.6.1.4.1.119.2.3.69.5.6.2.1.1.1ColumnipeStsFtpStatusIndexnot-accessiblecurrentIndex of this table.
1.3.6.1.4.1.119.2.3.69.5.6.2.1.1.2ColumnipeStsFtpStatusNEAddressnot-accessiblecurrentreserved.
1.3.6.1.4.1.119.2.3.69.5.6.2.1.1.3ColumnipeStsFtpStatusLoginUserread-onlycurrentName of Connected user.
1.3.6.1.4.1.119.2.3.69.5.6.2.1.1.4ColumnipeStsFtpStatusLoginIpAddressread-onlycurrentIP Address of Connected user .
1.3.6.1.4.1.119.2.3.69.5.6.2.1.1.5ColumnipeStsFtpStatusSessionIdread-onlycurrentSession information of Connected User.
1.3.6.1.4.1.119.2.3.69.5.6.3NodeipeStsSftp
1.3.6.1.4.1.119.2.3.69.5.6.3.1TableipeStsSftpStatusTablenot-accessiblecurrentTable of SFTP status .
1.3.6.1.4.1.119.2.3.69.5.6.3.1.1RowipeStsSftpStatusEntrynot-accessiblecurrentEntry of SFTP status .
1.3.6.1.4.1.119.2.3.69.5.6.3.1.1.1ColumnipeStsSftpStatusIndexnot-accessiblecurrentIndex of this table.
1.3.6.1.4.1.119.2.3.69.5.6.3.1.1.2ColumnipeStsSftpStatusNEAddressnot-accessiblecurrentreserved.
1.3.6.1.4.1.119.2.3.69.5.6.3.1.1.3ColumnipeStsSftpStatusLoginUserread-onlycurrentName of Connected user.
1.3.6.1.4.1.119.2.3.69.5.6.3.1.1.4ColumnipeStsSftpStatusLoginIpAddressread-onlycurrentIP Address of Connected user .
1.3.6.1.4.1.119.2.3.69.5.6.3.1.1.5ColumnipeStsSftpStatusSessionIdread-onlycurrentSession information of Connected User.
1.3.6.1.4.1.119.2.3.69.5.6.4NodeipeStsHttp
1.3.6.1.4.1.119.2.3.69.5.6.4.1TableipeStsHttpStatusTablenot-accessiblecurrentTable of HTTP status.
1.3.6.1.4.1.119.2.3.69.5.6.4.1.1RowipeStsHttpStatusEntrynot-accessiblecurrentEntry of HTTP status.
1.3.6.1.4.1.119.2.3.69.5.6.4.1.1.1ColumnipeStsHttpStatusIndexnot-accessiblecurrentIndex of this table.
1.3.6.1.4.1.119.2.3.69.5.6.4.1.1.2ColumnipeStsHttpStatusNEAddressnot-accessiblecurrentreserved.
1.3.6.1.4.1.119.2.3.69.5.6.4.1.1.3ColumnipeStsHttpStatusLoginUserread-onlycurrentName of Connected user.
1.3.6.1.4.1.119.2.3.69.5.6.4.1.1.4ColumnipeStsHttpStatusLoginIpAddressread-onlycurrentIP Address of Connected user .
1.3.6.1.4.1.119.2.3.69.5.6.4.1.1.5ColumnipeStsHttpStatusSessionIdread-onlycurrentSession information of Connected User.
1.3.6.1.4.1.119.2.3.69.5.6.5NodeipeStsHttps
1.3.6.1.4.1.119.2.3.69.5.6.5.1TableipeStsHttpsStatusTablenot-accessiblecurrentTable of HTTPS status.
1.3.6.1.4.1.119.2.3.69.5.6.5.1.1RowipeStsHttpsStatusEntrynot-accessiblecurrentEntry of HTTPS status.
1.3.6.1.4.1.119.2.3.69.5.6.5.1.1.1ColumnipeStsHttpsStatusIndexnot-accessiblecurrentIndex of this table.
1.3.6.1.4.1.119.2.3.69.5.6.5.1.1.2ColumnipeStsHttpsStatusNEAddressnot-accessiblecurrentreserved.
1.3.6.1.4.1.119.2.3.69.5.6.5.1.1.3ColumnipeStsHttpsStatusLoginUserread-onlycurrentName of Connected user.
1.3.6.1.4.1.119.2.3.69.5.6.5.1.1.4ColumnipeStsHttpsStatusLoginIpAddressread-onlycurrentIP Address of Connected user.
1.3.6.1.4.1.119.2.3.69.5.6.5.1.1.5ColumnipeStsHttpsStatusSessionIdread-onlycurrentSession information of Connected User.
1.3.6.1.4.1.119.2.3.69.5.6.6NodeipeStsStp
1.3.6.1.4.1.119.2.3.69.5.6.6.1TableipeStsStpBridgeTablenot-accessiblecurrentTable of STP status.
1.3.6.1.4.1.119.2.3.69.5.6.6.1.1RowipeStsStpBridgeEntrynot-accessiblecurrententry of STP status.
1.3.6.1.4.1.119.2.3.69.5.6.6.1.1.1ColumnipeStsStpBridgeIndexnot-accessiblecurrentIndex of this table.
1.3.6.1.4.1.119.2.3.69.5.6.6.1.1.2ColumnipeStsStpBridgeNEAddressnot-accessiblecurrentreserved.
1.3.6.1.4.1.119.2.3.69.5.6.6.1.1.3ColumnipeStsStpBridgeProtocolSpecificationread-onlycurrentAn indication of what version of the Spanning Tree Protocol is being run. The value 'decLb100(2)' indicates the DEC LANbridge 100 Spanning Tree protocol. IEEE …
1.3.6.1.4.1.119.2.3.69.5.6.6.1.1.4ColumnipeStsStpBridgeDesignatedRootread-onlycurrentThe bridge identifier of the root of the spanning tree as determined by the Spanning Tree Protocol as executed by this node. This value is used as the Root Ide…
1.3.6.1.4.1.119.2.3.69.5.6.6.1.1.5ColumnipeStsStpBridgeRootCostread-onlycurrentThe cost of the path to the root as seen from this bridge.
1.3.6.1.4.1.119.2.3.69.5.6.6.1.1.6ColumnipeStsStpBridgeRootPortread-onlycurrentThe port number of the port which offers the lowest cost path from this bridge to the root bridge.
1.3.6.1.4.1.119.2.3.69.5.6.6.1.1.7ColumnipeStsStpBridgeMaxAgeread-onlycurrentThe maximum age of Spanning Tree Protocol information learned from the network on any port before it is discarded, in units of hundredths of a second. This is …
1.3.6.1.4.1.119.2.3.69.5.6.6.1.1.8ColumnipeStsStpBridgeHelloTimeread-onlycurrentThe amount of time between the transmission of Configuration bridge PDUs by this node on any port when it is the root of the spanning tree or trying to become …
1.3.6.1.4.1.119.2.3.69.5.6.6.1.1.9ColumnipeStsStpBridgeForwardDelayread-onlycurrentThis time value, measured in units of hundredths of a second, controls how fast a port changes its spanning state when moving towards the Forwarding state. The…
1.3.6.1.4.1.119.2.3.69.5.6.6.2TableipeStsStpPortTablenot-accessiblecurrenttable of STP port status. When the system is running on the mplsTp mode, this table may return wrong value. (must not use this table on mplsTp mode).
1.3.6.1.4.1.119.2.3.69.5.6.6.2.1RowipeStsStpPortEntrynot-accessiblecurrententry of STP port status table.
1.3.6.1.4.1.119.2.3.69.5.6.6.2.1.1ColumnipeStsStpPortIfIndexnot-accessiblecurrentIndex of this table.
1.3.6.1.4.1.119.2.3.69.5.6.6.2.1.2ColumnipeStsStpPortBridgeIndexnot-accessiblecurrentIndex of this table.
1.3.6.1.4.1.119.2.3.69.5.6.6.2.1.3ColumnipeStsStpPortNEAddressnot-accessiblecurrentreserved.
1.3.6.1.4.1.119.2.3.69.5.6.6.2.1.4ColumnipeStsStpPortPortStateread-onlycurrentThe port's current state as defined by application of the Spanning Tree Protocol.
1.3.6.1.4.1.119.2.3.69.5.6.6.2.1.5ColumnipeStsStpPortDesignatedRootread-onlycurrentThe unique Bridge Identifier of the Bridge recorded as the Root in the Configuration BPDUs transmitted by the Designated Bridge for the segment to which the po…
1.3.6.1.4.1.119.2.3.69.5.6.6.2.1.6ColumnipeStsStpPortDesignatedCostread-onlycurrentThe path cost of the Designated Port of the segment connected to this port. This value is compared to the Root Path Cost field in received bridge PDUs.
1.3.6.1.4.1.119.2.3.69.5.6.6.2.1.7ColumnipeStsStpPortDesignatedBridgeread-onlycurrentThe Bridge Identifier of the bridge which this port considers to be the Designated Bridge for this port's segment.
1.3.6.1.4.1.119.2.3.69.5.6.6.2.1.8ColumnipeStsStpPortDesignatedPortread-onlycurrentThe Port Identifier of the port on the Designated Bridge for this port's segment.
1.3.6.1.4.1.119.2.3.69.5.6.7NodeipeStsPort
1.3.6.1.4.1.119.2.3.69.5.6.7.1TableipeStsPortEtherTablenot-accessiblecurrentTable of port status.
1.3.6.1.4.1.119.2.3.69.5.6.7.1.1RowipeStsPortEtherEntrynot-accessiblecurrententry of port status table.
1.3.6.1.4.1.119.2.3.69.5.6.7.1.1.1ColumnipeStsPortEtherIfIndexnot-accessiblecurrentIndex of this table.
1.3.6.1.4.1.119.2.3.69.5.6.7.1.1.2ColumnipeStsPortEtherNEAddressnot-accessiblecurrentreserved.
1.3.6.1.4.1.119.2.3.69.5.6.7.1.1.3ColumnipeStsPortEtherLinkUpread-onlycurrentLink Up/Down of I/F. value range:1 LinkUp 2 LinkDown
1.3.6.1.4.1.119.2.3.69.5.6.7.1.1.4ColumnipeStsPortEtherSpeedread-onlycurrentSpeedI of I/F. value range:10 10Mb/s 100 100Mb/s 1000 1000Mb/s
1.3.6.1.4.1.119.2.3.69.5.6.7.1.1.5ColumnipeStsPortEtherDuplexread-onlycurrentDuplex of I/F. value range:1 half duplex 2 full duplex
1.3.6.1.4.1.119.2.3.69.5.6.7.1.1.6ColumnipeStsPortEtherFlowControlread-onlycurrentFlowControl of I/F. value range:0 flowctl none 1 receive only 2 transfer only 3 receive and transfer
1.3.6.1.4.1.119.2.3.69.5.6.7.2TableipeStsPortNe2Tablenot-accessiblecurrentTable of NE2 port status table.
1.3.6.1.4.1.119.2.3.69.5.6.7.2.1RowipeStsPortNe2Entrynot-accessiblecurrententry of NE2 port status entry.
1.3.6.1.4.1.119.2.3.69.5.6.7.2.1.1ColumnipeStsPortNe2IfIndexnot-accessiblecurrentIndex of this table.
1.3.6.1.4.1.119.2.3.69.5.6.7.2.1.2ColumnipeStsPortNe2NEAddressnot-accessiblecurrentreserved.
1.3.6.1.4.1.119.2.3.69.5.6.7.2.1.3ColumnipeStsPortNe2LinkUpread-onlycurrentLink Up/Down of I/F.
1.3.6.1.4.1.119.2.3.69.5.6.8NodeipeStsBridge
1.3.6.1.4.1.119.2.3.69.5.6.8.1TableipeStsBridgeFdbTablenot-accessibleobsoleteLearning MAC table of bridge.
1.3.6.1.4.1.119.2.3.69.5.6.8.1.1RowipeStsBridgeFdbEntrynot-accessibleobsoleteLearning MAC table entry of bridge.
1.3.6.1.4.1.119.2.3.69.5.6.8.1.1.1ColumnipeStsBridgeFdbBridgeIndexnot-accessibleobsoleteIndex of this table.
1.3.6.1.4.1.119.2.3.69.5.6.8.1.1.2ColumnipeStsBridgeFdbIfIndexnot-accessibleobsoleteIndex of this table.
1.3.6.1.4.1.119.2.3.69.5.6.8.1.1.3ColumnipeStsBridgeFdbIndexnot-accessibleobsoleteIndex of this table.
1.3.6.1.4.1.119.2.3.69.5.6.8.1.1.4ColumnipeStsBridgeFdbNEAddressnot-accessibleobsoletereserved.
1.3.6.1.4.1.119.2.3.69.5.6.8.1.1.5ColumnipeStsBridgeFdbAddressread-onlyobsoleteLearning MAC address of bridge. When Snmpwalk is done, it becomes operation like ReadCreate.
1.3.6.1.4.1.119.2.3.69.5.6.9NodeipeStsAutoIp
1.3.6.1.4.1.119.2.3.69.5.6.9.1TableipeStsAutoIpTablenot-accessiblecurrentTable of AutoIP status.
1.3.6.1.4.1.119.2.3.69.5.6.9.1.1RowipeStsAutoIpEntrynot-accessiblecurrententry of AutoIP status table.
1.3.6.1.4.1.119.2.3.69.5.6.9.1.1.1ColumnipeStsAutoIpIndexnot-accessiblecurrentIndex of this table.
1.3.6.1.4.1.119.2.3.69.5.6.9.1.1.2ColumnipeStsAutoIpNEAddressnot-accessiblecurrentreserved.
1.3.6.1.4.1.119.2.3.69.5.6.9.1.1.3ColumnipeStsAutoIpStateread-onlycurrentAutoIP state information. Valid Value (1:before setting<initial value>,2:now setting, 3:automatic setting,4:manual setting).
1.3.6.1.4.1.119.2.3.69.5.6.9.1.1.4ColumnipeStsAutoIpTempAddressread-onlycurrentTemporary IP Address of AutoIP setting. initial value = 0.0.0.0 other value = Temporary IP Address If AutoIP state information is 3, Temporary IP Address is va…
1.3.6.1.4.1.119.2.3.69.5.7NodeipeAccessGroup
1.3.6.1.4.1.119.2.3.69.5.7.1TableipeAccessTablenot-accessiblecurrentA table of SNMP access information.
1.3.6.1.4.1.119.2.3.69.5.7.1.1RowipeAccessEntrynot-accessiblecurrentA set of SNMP access information. All OID don't check that a set value is valid or invalid.
1.3.6.1.4.1.119.2.3.69.5.7.1.1.1ColumnipeAccessIndexnot-accessiblecurrentIndex of this table.
1.3.6.1.4.1.119.2.3.69.5.7.1.1.2ColumnipeAccessNEAddressnot-accessiblecurrentreserved.
1.3.6.1.4.1.119.2.3.69.5.7.1.1.3ColumnipeAccessUserNameread-writecurrentA user name which is used for CTRL-TRAP and logging. When you send SET-Request, it is necessary to SET this OID to first 'variable-bindings' of the SET-Request…
1.3.6.1.4.1.119.2.3.69.5.7.1.1.4ColumnipeAccessFromAddressread-writecurrentA source IP address which is used for CTRL-TRAP and logging. The use is optional. When this OID is read, 0.0.0.0 is returned.
1.3.6.1.4.1.119.2.3.69.5.7.1.1.5ColumnipeAccessTyperead-writecurrentA type of connection origin. The use is optional. Whne this OID is read, invalid(0) is returned.
1.3.6.1.4.1.119.2.3.69.5.7.1.1.6ColumnipeAccessSessionIdread-writecurrentA session ID. The use is optional. When this OID is read, 0 is returned.
1.3.6.1.4.1.119.2.3.69.5.7.1.1.7ColumnipeAccessErrorCoderead-writecurrentError Code.
Type Definitions
NameSyntaxStatusDescription
AlarmTypeValueINTEGER { invalid(0), communicationsAlarm(1), qualityOfServiceAlarm(2), processingErrorAlarm(3), equipmentAlarm(4), environmentalAlarm(5), integrityViolationAlarm(6), operationalViolationAlarm(7), physicalViolationAlarm(8), securityViolationAlarm(9), timeDomainViolationAlarm(10) }currentAlarm Type (CCITT Rec. X.733)
ProbableCauseValueINTEGER { invalid(0), aIS(1), callSetUpFailure(2), degradedSignal(3), farEndReceiverFailure(4), framingError(5), lossOfFrame(6), lossOfPointer(7), lossOfSignal(8), payloadTypeMismatch(9), transmissionError(10), remoteAlarmInterface(11), excessiveBER(12), pathTraceMismatch(13), unavailable(14), signalLabelMismatch(15), lossOfMultiFrame(16), receiveFailure(17), transmitFailure(18), modulationFailure(19), demodulationFailure(20), broadcastChannelFailure(21), connectionEstablishmentError(22), invalidMessageReceived(23), localNodeTransmissionError(24), remoteNodeTransmissionError(25), routingFailure(26), backplaneFailure(51), dataSetProblem(52), equipmentIdentifierDuplication(53), externalIFDeviceProblem(54), lineCardProblem(55), multiplexerProblem(56), nEIdentifierDuplication(57), powerProblem(58), processorProblem(59), protectionPathFailure(60), receiverFailure(61), replaceableUnitMissing(62), replaceableUnitTypeMismatch(63), synchronizationSourceMismatch(64), terminalProblem(65), timingProblem(66), transmitterFailure(67), trunkCardProblem(68), replaceableUnitProblem(69), realTimeClockFailure(70), antennaFailure(71), batteryChargingFailure(72), diskFailure(73), frequencyHoppingFailure(74), iODeviceError(75), lossOfSynchronisation(76), lossOfRedundancy(77), powerSupplyFailure(78), signalQualityEvaluationFailure(79), tranceiverFailure(80), protectionMechanismFailure(81), protectingResourceFailure(82), airCompressorFailure(101), airConditioningFailure(102), airDryerFailure(103), batteryDischarging(104), batteryFailure(105), commercialPowerFailure(106), coolingFanFailure(107), engineFailure(108), fireDetectorFailure(109), fuseFailure(110), generatorFailure(111), lowBatteryThreshold(112), pumpFailure(113), rectifierFailure(114), rectifierHighVoltage(115), rectifierLowFVoltage(116), ventilationsSystemFailure(117), enclosureDoorOpen(118), explosiveGas(119), fire(120), flood(121), highHumidity(122), highTemperature(123), highWind(124), iceBuildUp(125), intrusionDetection(126), lowFuel(127), lowHumidity(128), lowCablePressure(129), lowTemperatue(130), lowWater(131), smoke(132), toxicGas(133), coolingSystemFailure(134), externalEquipmentFailure(135), externalPointFailure(136), storageCapacityProblem(151), memoryMismatch(152), corruptData(153), outOfCPUCycles(154), sfwrEnvironmentProblem(155), sfwrDownloadFailure(156), lossOfRealTimel(157), applicationSubsystemFailure(158), configurationOrCustomisationError(159), databaseInconsistency(160), fileError(161), outOfMemory(162), softwareError(163), timeoutExpired(164), underlayingResourceUnavailable(165), versionMismatch(166), bandwidthReduced(201), congestion(202), excessiveErrorRate(203), excessiveResponseTime(204), excessiveRetransmissionRate(205), reducedLoggingCapability(206), systemResourcesOverload(207), adapterError(500), applicationSubsystemFailture(501), bandwidthReducedX733(502), callEstablishmentError(503), communicationsProtocolError(504), communicationsSubsystemFailure(505), configurationOrCustomizationError(506), congestionX733(507), coruptData(508), cpuCyclesLimitExceeded(509), dataSetOrModemError(510), degradedSignalX733(511), dteDceInterfaceError(512), enclosureDoorOpenX733(513), equipmentMalfunction(514), excessiveVibration(515), fileErrorX733(516), fireDetected(517), framingErrorX733(518), heatingVentCoolingSystemProblem(519), humidityUnacceptable(520), inputOutputDeviceError(521), inputDeviceError(522), lanError(523), leakDetected(524), localNodeTransmissionErrorX733(525), lossOfFrameX733(526), lossOfSignalX733(527), materialSupplyExhausted(528), multiplexerProblemX733(529), outOfMemoryX733(530), ouputDeviceError(531), performanceDegraded(532), powerProblems(533), pressureUnacceptable(534), processorProblems(535), pumpFailureX733(536), queueSizeExceeded(537), receiveFailureX733(538), receiverFailureX733(539), remoteNodeTransmissionErrorX733(540), resourceAtOrNearingCapacity(541), responseTimeExecessive(542), retransmissionRateExcessive(543), softwareErrorX733(544), softwareProgramAbnormallyTerminated(545), softwareProgramError(546), storageCapacityProblemX733(547), temperatureUnacceptable(548), thresholdCrossed(549), timingProblemX733(550), toxicLeakDetected(551), transmitFailureX733(552), transmiterFailure(553), underlyingResourceUnavailable(554), versionMismatchX733(555), authenticationFailure(600), breachOfConfidentiality(601), cableTamper(602), delayedInformation(603), denialOfService(604), duplicateInformation(605), informationMissing(606), informationModificationDetected(607), informationOutOfSequence(608), keyExpired(609), nonRepudiationFailure(610), outOfHoursActivity(611), outOfService(612), proceduralError(613), unauthorizedAccessAttempt(614), unexpectedInformation(615), other(1024) }currentProbable Cause (CCITT Rec. X.733)
MIB Viewer