IPI-CUSTOMIF-LOGICAL-MIB
24 objects
No module-level DESCRIPTION found.
Imported Objects
| IANAifType-MIB | IANAifType |
| IPI-CUSTOMIF-STATS-MIB | ifCustomMib |
| IPI-MODULE-MIB | ipi |
| SNMPv2-CONF | MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-MIB | snmpTraps |
| SNMPv2-SMI | Counter32 Counter64 Gauge32 Integer32 mib-2 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE TimeTicks |
| SNMPv2-TC | AutonomousType DisplayString PhysAddress RowStatus TestAndIncr TEXTUAL-CONVENTION TimeStamp TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.36673.103.5.2 | TableifLogicalTable | not-accessible | current | A list of interface entries. The number of entries is given by the value of ifLogicalNumber. |
| 1.3.6.1.4.1.36673.103.5.2.1 | RowifLogicalEntry | not-accessible | current | An entry containing management information applicable to a particular interface. |
| 1.3.6.1.4.1.36673.103.5.2.1.1 | ColumnifIndex | read-only | current | A unique value, greater than zero, for each interface. It is recommended that values are assigned contiguously starting from 1. The value for each interface su… |
| 1.3.6.1.4.1.36673.103.5.2.1.2 | ColumnifDescr | read-only | current | A textual string containing information about the interface. This string should include the name of the manufacturer, the product name and the version of the i… |
| 1.3.6.1.4.1.36673.103.5.2.1.3 | ColumnifType | read-only | current | The type of interface. Additional values for ifType are assigned by the Internet Assigned Numbers Authority (IANA), through updating the syntax of the IANAifTy… |
| 1.3.6.1.4.1.36673.103.5.2.1.4 | ColumnifMtu | read-only | current | The size of the largest packet which can be sent/received on the interface, specified in octets. For interfaces that are used for transmitting network datagram… |
| 1.3.6.1.4.1.36673.103.5.2.1.5 | ColumnifSpeed | read-only | current | An estimate of the interface's current bandwidth in bits per second. For interfaces which do not vary in bandwidth or for those where no accurate estimation ca… |
| 1.3.6.1.4.1.36673.103.5.2.1.6 | ColumnifPhysAddress | read-only | current | The interface's address at its protocol sub-layer. For example, for an 802.x interface, this object normally contains a MAC address. The interface's media-spec… |
| 1.3.6.1.4.1.36673.103.5.2.1.7 | ColumnifAdminStatus | read-write | current | The desired state of the interface. The testing(3) state indicates that no operational packets can be passed. When a managed system initializes, all interfaces… |
| 1.3.6.1.4.1.36673.103.5.2.1.8 | ColumnifOperStatus | read-only | current | The current operational state of the interface. The testing(3) state indicates that no operational packets can be passed. If ifAdminStatus is down(2) then ifOp… |
| 1.3.6.1.4.1.36673.103.5.2.1.9 | ColumnifLastChange | read-only | current | The value of sysUpTime at the time the interface entered its current operational state. If the current state was entered prior to the last re-initialization of… |
| 1.3.6.1.4.1.36673.103.5.2.1.10 | ColumnifInOctets | read-only | current | The total number of octets received on the interface, including framing characters. Discontinuities in the value of this counter can occur at re-initialization… |
| 1.3.6.1.4.1.36673.103.5.2.1.11 | ColumnifInUcastPkts | read-only | current | The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were not addressed to a multicast or broadcast address at this sub-layer. Dis… |
| 1.3.6.1.4.1.36673.103.5.2.1.12 | ColumnifInNUcastPkts | read-only | deprecated | The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were addressed to a multicast or broadcast address at this sub-layer. Discont… |
| 1.3.6.1.4.1.36673.103.5.2.1.13 | ColumnifInDiscards | read-only | current | The number of inbound packets which were chosen to be discarded even though no errors had been detected to prevent their being deliverable to a higher-layer pr… |
| 1.3.6.1.4.1.36673.103.5.2.1.14 | ColumnifInErrors | read-only | current | For packet-oriented interfaces, the number of inbound packets that contained errors preventing them from being deliverable to a higher-layer protocol. For char… |
| 1.3.6.1.4.1.36673.103.5.2.1.15 | ColumnifInUnknownProtos | read-only | current | For packet-oriented interfaces, the number of packets received via the interface which were discarded because of an unknown or unsupported protocol. For charac… |
| 1.3.6.1.4.1.36673.103.5.2.1.16 | ColumnifOutOctets | read-only | current | The total number of octets transmitted out of the interface, including framing characters. Discontinuities in the value of this counter can occur at re-initial… |
| 1.3.6.1.4.1.36673.103.5.2.1.17 | ColumnifOutUcastPkts | read-only | current | The total number of packets that higher-level protocols requested be transmitted, and which were not addressed to a multicast or broadcast address at this sub-… |
| 1.3.6.1.4.1.36673.103.5.2.1.18 | ColumnifOutNUcastPkts | read-only | deprecated | The total number of packets that higher-level protocols requested be transmitted, and which were addressed to a multicast or broadcast address at this sub-laye… |
| 1.3.6.1.4.1.36673.103.5.2.1.19 | ColumnifOutDiscards | read-only | current | The number of outbound packets which were chosen to be discarded even though no errors had been detected to prevent their being transmitted. One possible reaso… |
| 1.3.6.1.4.1.36673.103.5.2.1.20 | ColumnifOutErrors | read-only | current | For packet-oriented interfaces, the number of outbound packets that could not be transmitted because of errors. For character-oriented or fixed-length interfac… |
| 1.3.6.1.4.1.36673.103.5.2.1.21 | ColumnifOutQLen | read-only | deprecated | The length of the output packet queue (in packets). |
| 1.3.6.1.4.1.36673.103.5.2.1.22 | ColumnifSpecific | read-only | deprecated | A reference to MIB definitions specific to the particular media being used to realize the interface. It is recommended that this value point to an instance of … |