IPI-IP-SLA-MIB
31 objects
This MIB module is for managing Datamodel for ipsla definations
Imported Objects
| IPI-MODULE-MIB | ipi |
| IPV6-TC | Ipv6Address |
| SNMPv2-CONF | MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-MIB | snmpTraps |
| SNMPv2-SMI | Counter32 Counter64 enterprises Gauge32 Integer32 IpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-IDENTITY OBJECT-TYPE TimeTicks Unsigned32 |
| SNMPv2-TC | DateAndTime DisplayString PhysAddress RowStatus TEXTUAL-CONVENTION |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.36673.130 | Identityipi-ip-sla | This MIB module is for managing Datamodel for ipsla definations | ||
| 1.3.6.1.4.1.36673.130.0 | NodeipiCMLSEPipCMLSEPslaNotificationsPrefix | |||
| 1.3.6.1.4.1.36673.130.0.1 | Notificationicmpechothreshold | current | icmp-echo-threshold event is generated when packet level RTT value is greater than the threshold value or within the threshold time response is not received | |
| 1.3.6.1.4.1.36673.130.0.2 | Notificationicmpechotimeout | current | icmp-echo-timeout is generated when echo packet response is not received for any of the sent packets within the configured timeout value | |
| 1.3.6.1.4.1.36673.130.0.3 | Notificationicmpechodisconnect | current | icmp-echo-disconnect is generated when timeout is observed for any of the packet in sla measurement operation | |
| 1.3.6.1.4.1.36673.130.1 | TableipiIpSlaProcessesprocessTable | not-accessible | current | This table provides information for List of IP SLA processes |
| 1.3.6.1.4.1.36673.130.1.1 | RowipiIpSlaProcessesprocessEntry | not-accessible | current | An entry containing information for List of IP SLA processes |
| 1.3.6.1.4.1.36673.130.1.1.1 | ColumnipiIpSlaProcessIdentifier | read-only | current | Use this attribute to set the IPSLA. |
| 1.3.6.1.4.1.36673.130.1.1.2 | ColumnipiIpSlaIpSlaStatisticsDestination | read-only | current | Destination IP or host name for ICMP Echo for this SLA session |
| 1.3.6.1.4.1.36673.130.1.1.3 | ColumnipiIpSlaIpSlaStatisticsStartTime | read-only | current | Time at which ip sla measurement started |
| 1.3.6.1.4.1.36673.130.1.1.4 | ColumnipiIpSlaIpSlaStatisticsElapsedTime | read-only | current | Time elapsed since the ip sla measurement started. In milliseconds |
| 1.3.6.1.4.1.36673.130.1.1.5 | ColumnipiIpSlaIpSlaStatisticsPacketsSent | read-only | current | Number of test packets sent |
| 1.3.6.1.4.1.36673.130.1.1.6 | ColumnipiIpSlaIpSlaStatisticsPacketsReceived | read-only | current | Number of test packets received |
| 1.3.6.1.4.1.36673.130.1.1.7 | ColumnipiIpSlaIpSlaStatisticsPacketsLost | read-only | current | Packet loss percentage |
| 1.3.6.1.4.1.36673.130.1.1.8 | ColumnipiIpSlaIpSlaStatisticsInvalidTests | read-only | current | Number of Invalid tests |
| 1.3.6.1.4.1.36673.130.1.1.9 | ColumnipiIpSlaIpSlaStatisticsMinimumRoundTripDelay | read-only | current | Minimum Round trip delay time |
| 1.3.6.1.4.1.36673.130.1.1.10 | ColumnipiIpSlaIpSlaStatisticsMaximumRoundTripDelay | read-only | current | Maximum Round Trip delay time |
| 1.3.6.1.4.1.36673.130.1.1.11 | ColumnipiIpSlaIpSlaStatisticsAverageRoundTripDelay | read-only | current | Average Round Trip delay time |
| 1.3.6.1.4.1.36673.130.2 | TableipiIpSlaIcmpEchoProcessTable | not-accessible | current | This table provides information for List of ICMP Echo process |
| 1.3.6.1.4.1.36673.130.2.1 | RowipiIpSlaIcmpEchoProcessEntry | not-accessible | current | An entry containing information for List of ICMP Echo process |
| 1.3.6.1.4.1.36673.130.2.1.1 | ColumnipiIpSlaIcmpEchoProcessHost | read-only | current | Use this attribute to set the ICMP Echo host name or IP address. |
| 1.3.6.1.4.1.36673.130.2.1.2 | ColumnipiIpSlaIcmpEchoProcessSourceInterface | read-only | current | Source Interface name |
| 1.3.6.1.4.1.36673.130.2.1.3 | ColumnipiIpSlaIcmpEchoProcessSourceIp | read-only | current | Source IP Interface name |
| 1.3.6.1.4.1.36673.130.2.1.4 | ColumnipiIpSlaIcmpEchoProcessFrequency | read-only | current | The frequency (interval) correlates to how often the ICMP packet is sent. The unit of this parameter is in seconds. |
| 1.3.6.1.4.1.36673.130.2.1.5 | ColumnipiIpSlaIcmpEchoProcessTimeout | read-only | current | The timeout value correlates to how long the Ping application will wait for the response after sending packets ICMP Echo packets. |
| 1.3.6.1.4.1.36673.130.2.1.6 | ColumnipiIpSlaIcmpEchoProcessThreshold | read-only | current | The threshold value correlates to the limit the administrator sets as what would be a successful test. Threshold can be configured in milli-seconds. |
| 1.3.6.1.4.1.36673.130.3 | TableipiIpSlaScheduledProcessTable | not-accessible | current | This table provides information for IP SLA Schedule process |
| 1.3.6.1.4.1.36673.130.3.1 | RowipiIpSlaScheduledProcessEntry | not-accessible | current | An entry containing information for IP SLA Schedule process |
| 1.3.6.1.4.1.36673.130.3.1.1 | ColumnipiIpSlaScheduledProcessScheduledPid | read-only | current | Use this attribute to schedule the IPSLA measurement operation. |
| 1.3.6.1.4.1.36673.130.3.1.2 | ColumnipiIpSlaScheduledProcessTimeRangeName | read-only | current | Time range object name to schedule this SLA operation. |
| 1.3.6.1.4.1.36673.130.3.1.3 | ColumnipiIpSlaScheduledProcessVrfName | read-only | current | VRF name |