IPV6-MIB
91 objects
The MIB module for entities implementing the IPv6 protocol.
Imported Objects
| IPV6-TC | Ipv6Address Ipv6AddressIfIdentifier Ipv6AddressPrefix Ipv6IfIndex Ipv6IfIndexOrZero |
| SNMPv2-CONF | MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-SMI | Counter32 Gauge32 Integer32 mib-2 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | DisplayString PhysAddress RowPointer TimeStamp TruthValue VariablePointer |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.2.1.55 | Identityipv6MIB | The MIB module for entities implementing the IPv6 protocol. | ||
| 1.3.6.1.2.1.55.1 | Nodeipv6MIBObjects | |||
| 1.3.6.1.2.1.55.1.1 | Scalaripv6Forwarding | read-write | current | The indication of whether this entity is acting as an IPv6 router in respect to the forwarding of datagrams received by, but not addressed to, this entity. IPv… |
| 1.3.6.1.2.1.55.1.2 | Scalaripv6DefaultHopLimit | read-write | current | The default value inserted into the Hop Limit field of the IPv6 header of datagrams originated at this entity, whenever a Hop Limit value is not supplied by th… |
| 1.3.6.1.2.1.55.1.3 | Scalaripv6Interfaces | read-only | current | The number of IPv6 interfaces (regardless of their current state) present on this system. |
| 1.3.6.1.2.1.55.1.4 | Scalaripv6IfTableLastChange | read-only | current | The value of sysUpTime at the time of the last insertion or removal of an entry in the ipv6IfTable. If the number of entries has been unchanged since the last … |
| 1.3.6.1.2.1.55.1.5 | Tableipv6IfTable | not-accessible | current | The IPv6 Interfaces table contains information on the entity's internetwork-layer interfaces. An IPv6 interface constitutes a logical network layer attachment … |
| 1.3.6.1.2.1.55.1.5.1 | Rowipv6IfEntry | not-accessible | current | An interface entry containing objects about a particular IPv6 interface. |
| 1.3.6.1.2.1.55.1.5.1.1 | Columnipv6IfIndex | not-accessible | current | A unique non-zero value identifying the particular IPv6 interface. |
| 1.3.6.1.2.1.55.1.5.1.2 | Columnipv6IfDescr | read-write | current | A textual string containing information about the interface. This string may be set by the network management system. |
| 1.3.6.1.2.1.55.1.5.1.3 | Columnipv6IfLowerLayer | read-only | current | This object identifies the protocol layer over which this network interface operates. If this network interface operates over the data-link layer, then the val… |
| 1.3.6.1.2.1.55.1.5.1.4 | Columnipv6IfEffectiveMtu | read-only | current | The size of the largest IPv6 packet which can be sent/received on the interface, specified in octets. |
| 1.3.6.1.2.1.55.1.5.1.5 | Columnipv6IfReasmMaxSize | read-only | current | The size of the largest IPv6 datagram which this entity can re-assemble from incoming IPv6 fragmented datagrams received on this interface. |
| 1.3.6.1.2.1.55.1.5.1.6 | Columnipv6IfIdentifier | read-write | current | The Interface Identifier for this interface that is (at least) unique on the link this interface is attached to. The Interface Identifier is combined with an a… |
| 1.3.6.1.2.1.55.1.5.1.7 | Columnipv6IfIdentifierLength | read-write | current | The length of the Interface Identifier in bits. |
| 1.3.6.1.2.1.55.1.5.1.8 | Columnipv6IfPhysicalAddress | read-only | current | The interface's physical address. For example, for an IPv6 interface attached to an 802.x link, this object normally contains a MAC address. Note that in some … |
| 1.3.6.1.2.1.55.1.5.1.9 | Columnipv6IfAdminStatus | read-write | current | The desired state of the interface. When a managed system initializes, all IPv6 interfaces start with ipv6IfAdminStatus in the down(2) state. As a result of ei… |
| 1.3.6.1.2.1.55.1.5.1.10 | Columnipv6IfOperStatus | read-only | current | The current operational state of the interface. The noIfIdentifier(3) state indicates that no valid Interface Identifier is assigned to the interface. This sta… |
| 1.3.6.1.2.1.55.1.5.1.11 | Columnipv6IfLastChange | read-only | current | The value of sysUpTime at the time the interface entered its current operational state. If the current state was entered prior to the last re-initialization of… |
| 1.3.6.1.2.1.55.1.6 | Tableipv6IfStatsTable | not-accessible | current | IPv6 interface traffic statistics. |
| 1.3.6.1.2.1.55.1.6.1 | Rowipv6IfStatsEntry | not-accessible | current | An interface statistics entry containing objects at a particular IPv6 interface. |
| 1.3.6.1.2.1.55.1.6.1.1 | Columnipv6IfStatsInReceives | read-only | current | The total number of input datagrams received by the interface, including those received in error. |
| 1.3.6.1.2.1.55.1.6.1.2 | Columnipv6IfStatsInHdrErrors | read-only | current | The number of input datagrams discarded due to errors in their IPv6 headers, including version number mismatch, other format errors, hop count exceeded, errors… |
| 1.3.6.1.2.1.55.1.6.1.3 | Columnipv6IfStatsInTooBigErrors | read-only | current | The number of input datagrams that could not be forwarded because their size exceeded the link MTU of outgoing interface. |
| 1.3.6.1.2.1.55.1.6.1.4 | Columnipv6IfStatsInNoRoutes | read-only | current | The number of input datagrams discarded because no route could be found to transmit them to their destination. |
| 1.3.6.1.2.1.55.1.6.1.5 | Columnipv6IfStatsInAddrErrors | read-only | current | The number of input datagrams discarded because the IPv6 address in their IPv6 header's destination field was not a valid address to be received at this entity… |
| 1.3.6.1.2.1.55.1.6.1.6 | Columnipv6IfStatsInUnknownProtos | read-only | current | The number of locally-addressed datagrams received successfully but discarded because of an unknown or unsupported protocol. This counter is incremented at the… |
| 1.3.6.1.2.1.55.1.6.1.7 | Columnipv6IfStatsInTruncatedPkts | read-only | current | The number of input datagrams discarded because datagram frame didn't carry enough data. |
| 1.3.6.1.2.1.55.1.6.1.8 | Columnipv6IfStatsInDiscards | read-only | current | The number of input IPv6 datagrams for which no problems were encountered to prevent their continued processing, but which were discarded (e.g., for lack of bu… |
| 1.3.6.1.2.1.55.1.6.1.9 | Columnipv6IfStatsInDelivers | read-only | current | The total number of datagrams successfully delivered to IPv6 user-protocols (including ICMP). This counter is incremented at the interface to which these datag… |
| 1.3.6.1.2.1.55.1.6.1.10 | Columnipv6IfStatsOutForwDatagrams | read-only | current | The number of output datagrams which this entity received and forwarded to their final destinations. In entities which do not act as IPv6 routers, this counter… |
| 1.3.6.1.2.1.55.1.6.1.11 | Columnipv6IfStatsOutRequests | read-only | current | The total number of IPv6 datagrams which local IPv6 user-protocols (including ICMP) supplied to IPv6 in requests for transmission. Note that this counter does … |
| 1.3.6.1.2.1.55.1.6.1.12 | Columnipv6IfStatsOutDiscards | read-only | current | The number of output IPv6 datagrams for which no problem was encountered to prevent their transmission to their destination, but which were discarded (e.g., fo… |
| 1.3.6.1.2.1.55.1.6.1.13 | Columnipv6IfStatsOutFragOKs | read-only | current | The number of IPv6 datagrams that have been successfully fragmented at this output interface. |
| 1.3.6.1.2.1.55.1.6.1.14 | Columnipv6IfStatsOutFragFails | read-only | current | The number of IPv6 datagrams that have been discarded because they needed to be fragmented at this output interface but could not be. |
| 1.3.6.1.2.1.55.1.6.1.15 | Columnipv6IfStatsOutFragCreates | read-only | current | The number of output datagram fragments that have been generated as a result of fragmentation at this output interface. |
| 1.3.6.1.2.1.55.1.6.1.16 | Columnipv6IfStatsReasmReqds | read-only | current | The number of IPv6 fragments received which needed to be reassembled at this interface. Note that this counter is incremented at the interface to which these f… |
| 1.3.6.1.2.1.55.1.6.1.17 | Columnipv6IfStatsReasmOKs | read-only | current | The number of IPv6 datagrams successfully reassembled. Note that this counter is incremented at the interface to which these datagrams were addressed which mig… |
| 1.3.6.1.2.1.55.1.6.1.18 | Columnipv6IfStatsReasmFails | read-only | current | The number of failures detected by the IPv6 re- assembly algorithm (for whatever reason: timed out, errors, etc.). Note that this is not necessarily a count of… |
| 1.3.6.1.2.1.55.1.6.1.19 | Columnipv6IfStatsInMcastPkts | read-only | current | The number of multicast packets received by the interface |
| 1.3.6.1.2.1.55.1.6.1.20 | Columnipv6IfStatsOutMcastPkts | read-only | current | The number of multicast packets transmitted by the interface |
| 1.3.6.1.2.1.55.1.7 | Tableipv6AddrPrefixTable | not-accessible | current | The list of IPv6 address prefixes of IPv6 interfaces. |
| 1.3.6.1.2.1.55.1.7.1 | Rowipv6AddrPrefixEntry | not-accessible | current | An interface entry containing objects of a particular IPv6 address prefix. |
| 1.3.6.1.2.1.55.1.7.1.1 | Columnipv6AddrPrefix | not-accessible | current | The prefix associated with the this interface. |
| 1.3.6.1.2.1.55.1.7.1.2 | Columnipv6AddrPrefixLength | not-accessible | current | The length of the prefix (in bits). |
| 1.3.6.1.2.1.55.1.7.1.3 | Columnipv6AddrPrefixOnLinkFlag | read-only | current | This object has the value 'true(1)', if this prefix can be used for on-link determination and the value 'false(2)' otherwise. |
| 1.3.6.1.2.1.55.1.7.1.4 | Columnipv6AddrPrefixAutonomousFlag | read-only | current | Autonomous address configuration flag. When true(1), indicates that this prefix can be used for autonomous address configuration (i.e. can be used to form a lo… |
| 1.3.6.1.2.1.55.1.7.1.5 | Columnipv6AddrPrefixAdvPreferredLifetime | read-only | current | It is the length of time in seconds that this prefix will remain preferred, i.e. time until deprecation. A value of 4,294,967,295 represents infinity. The addr… |
| 1.3.6.1.2.1.55.1.7.1.6 | Columnipv6AddrPrefixAdvValidLifetime | read-only | current | It is the length of time in seconds that this prefix will remain valid, i.e. time until invalidation. A value of 4,294,967,295 represents infinity. The address… |
| 1.3.6.1.2.1.55.1.8 | Tableipv6AddrTable | not-accessible | current | The table of addressing information relevant to this node's interface addresses. |
| 1.3.6.1.2.1.55.1.8.1 | Rowipv6AddrEntry | not-accessible | current | The addressing information for one of this node's interface addresses. |
| 1.3.6.1.2.1.55.1.8.1.1 | Columnipv6AddrAddress | not-accessible | current | The IPv6 address to which this entry's addressing information pertains. |
| 1.3.6.1.2.1.55.1.8.1.2 | Columnipv6AddrPfxLength | read-only | current | The length of the prefix (in bits) associated with the IPv6 address of this entry. |
| 1.3.6.1.2.1.55.1.8.1.3 | Columnipv6AddrType | read-only | current | The type of address. Note that 'stateless(1)' refers to an address that was statelessly autoconfigured; 'stateful(2)' refers to a address which was acquired by… |
| 1.3.6.1.2.1.55.1.8.1.4 | Columnipv6AddrAnycastFlag | read-only | current | This object has the value 'true(1)', if this address is an anycast address and the value 'false(2)' otherwise. |
| 1.3.6.1.2.1.55.1.8.1.5 | Columnipv6AddrStatus | read-only | current | Address status. The preferred(1) state indicates that this is a valid address that can appear as the destination or source address of a packet. The deprecated(… |
| 1.3.6.1.2.1.55.1.9 | Scalaripv6RouteNumber | read-only | current | The number of current ipv6RouteTable entries. This is primarily to avoid having to read the table in order to determine this number. |
| 1.3.6.1.2.1.55.1.10 | Scalaripv6DiscardedRoutes | read-only | current | The number of routing entries which were chosen to be discarded even though they are valid. One possible reason for discarding such an entry could be to free-u… |
| 1.3.6.1.2.1.55.1.11 | Tableipv6RouteTable | not-accessible | current | IPv6 Routing table. This table contains an entry for each valid IPv6 unicast route that can be used for packet forwarding determination. |
| 1.3.6.1.2.1.55.1.11.1 | Rowipv6RouteEntry | not-accessible | current | A routing entry. |
| 1.3.6.1.2.1.55.1.11.1.1 | Columnipv6RouteDest | not-accessible | current | The destination IPv6 address of this route. This object may not take a Multicast address value. |
| 1.3.6.1.2.1.55.1.11.1.2 | Columnipv6RoutePfxLength | not-accessible | current | Indicates the prefix length of the destination address. |
| 1.3.6.1.2.1.55.1.11.1.3 | Columnipv6RouteIndex | not-accessible | current | The value which uniquely identifies the route among the routes to the same network layer destination. The way this value is chosen is implementation specific b… |
| 1.3.6.1.2.1.55.1.11.1.4 | Columnipv6RouteIfIndex | read-only | current | The index value which uniquely identifies the local interface through which the next hop of this route should be reached. The interface identified by a particu… |
| 1.3.6.1.2.1.55.1.11.1.5 | Columnipv6RouteNextHop | read-only | current | On remote routes, the address of the next system en route; otherwise, ::0 ('00000000000000000000000000000000'H in ASN.1 string representation). |
| 1.3.6.1.2.1.55.1.11.1.6 | Columnipv6RouteType | read-only | current | The type of route. Note that 'local(3)' refers to a route for which the next hop is the final destination; 'remote(4)' refers to a route for which the next hop… |
| 1.3.6.1.2.1.55.1.11.1.7 | Columnipv6RouteProtocol | read-only | current | The routing mechanism via which this route was learned. |
| 1.3.6.1.2.1.55.1.11.1.8 | Columnipv6RoutePolicy | read-only | current | The general set of conditions that would cause the selection of one multipath route (set of next hops for a given destination) is referred to as 'policy'. Unle… |
| 1.3.6.1.2.1.55.1.11.1.9 | Columnipv6RouteAge | read-only | current | The number of seconds since this route was last updated or otherwise determined to be correct. Note that no semantics of `too old' can be implied except throug… |
| 1.3.6.1.2.1.55.1.11.1.10 | Columnipv6RouteNextHopRDI | read-only | current | The Routing Domain ID of the Next Hop. The semantics of this object are determined by the routing-protocol specified in the route's ipv6RouteProtocol value. Wh… |
| 1.3.6.1.2.1.55.1.11.1.11 | Columnipv6RouteMetric | read-only | current | The routing metric for this route. The semantics of this metric are determined by the routing protocol specified in the route's ipv6RouteProtocol value. When t… |
| 1.3.6.1.2.1.55.1.11.1.12 | Columnipv6RouteWeight | read-only | current | The system internal weight value for this route. The semantics of this value are determined by the implementation specific rules. Generally, within routes with… |
| 1.3.6.1.2.1.55.1.11.1.13 | Columnipv6RouteInfo | read-only | current | A reference to MIB definitions specific to the particular routing protocol which is responsible for this route, as determined by the value specified in the rou… |
| 1.3.6.1.2.1.55.1.11.1.14 | Columnipv6RouteValid | read-write | current | Setting this object to the value 'false(2)' has the effect of invalidating the corresponding entry in the ipv6RouteTable object. That is, it effectively disass… |
| 1.3.6.1.2.1.55.1.12 | Tableipv6NetToMediaTable | not-accessible | current | The IPv6 Address Translation table used for mapping from IPv6 addresses to physical addresses. The IPv6 address translation table contain the Ipv6Address to `p… |
| 1.3.6.1.2.1.55.1.12.1 | Rowipv6NetToMediaEntry | not-accessible | current | Each entry contains one IPv6 address to `physical' address equivalence. |
| 1.3.6.1.2.1.55.1.12.1.1 | Columnipv6NetToMediaNetAddress | not-accessible | current | The IPv6 Address corresponding to the media-dependent `physical' address. |
| 1.3.6.1.2.1.55.1.12.1.2 | Columnipv6NetToMediaPhysAddress | read-only | current | The media-dependent `physical' address. |
| 1.3.6.1.2.1.55.1.12.1.3 | Columnipv6NetToMediaType | read-only | current | The type of the mapping. The 'dynamic(2)' type indicates that the IPv6 address to physical addresses mapping has been dynamically resolved using the IPv6 Neigh… |
| 1.3.6.1.2.1.55.1.12.1.4 | Columnipv6IfNetToMediaState | read-only | current | The Neighbor Unreachability Detection [8] state for the interface when the address mapping in this entry is used. |
| 1.3.6.1.2.1.55.1.12.1.5 | Columnipv6IfNetToMediaLastUpdated | read-only | current | The value of sysUpTime at the time this entry was last updated. If this entry was updated prior to the last re-initialization of the local network management s… |
| 1.3.6.1.2.1.55.1.12.1.6 | Columnipv6NetToMediaValid | read-write | current | Setting this object to the value 'false(2)' has the effect of invalidating the corresponding entry in the ipv6NetToMediaTable. That is, it effectively disassoc… |
| 1.3.6.1.2.1.55.2 | Nodeipv6Notifications | |||
| 1.3.6.1.2.1.55.2.0 | Nodeipv6NotificationPrefix | |||
| 1.3.6.1.2.1.55.2.0.1 | Notificationipv6IfStateChange | current | An ipv6IfStateChange notification signifies that there has been a change in the state of an ipv6 interface. This notification should be generated when the inte… | |
| 1.3.6.1.2.1.55.3 | Nodeipv6Conformance | |||
| 1.3.6.1.2.1.55.3.1 | Nodeipv6Compliances | |||
| 1.3.6.1.2.1.55.3.1.1 | Complianceipv6Compliance | read-only | current | The compliance statement for SNMPv2 entities which implement ipv6 MIB. |
| 1.3.6.1.2.1.55.3.2 | Nodeipv6Groups | |||
| 1.3.6.1.2.1.55.3.2.1 | Groupipv6GeneralGroup | current | The IPv6 group of objects providing for basic management of IPv6 entities. | |
| 1.3.6.1.2.1.55.3.2.2 | Groupipv6NotificationGroup | current | The notification that an IPv6 entity is required to implement. |