IPV6-TUNNEL-MIB
17 objects
The Quanta Private MIB for IPV6 Tunnel
Imported Objects
| INET-ADDRESS-MIB | InetAddressIPv4 InetAddressPrefixLength |
| IPV6-TC | Ipv6Address Ipv6AddressPrefix Ipv6IfIndex |
| QUANTA-SWITCH-MIB | switch |
| RFC1213-MIB | DisplayString PhysAddress |
| SNMPv2-CONF | MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-SMI | Integer32 mib-2 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | RowStatus |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.7244.2.27 | Identityipv6Tunnel | The Quanta Private MIB for IPV6 Tunnel | ||
| 1.3.6.1.4.1.7244.2.27.1 | NodeagentTunnelIPV6Group | |||
| 1.3.6.1.4.1.7244.2.27.1.1 | TableagentTunnelIPV6Table | not-accessible | current | A summary table of the IPV6 tunnel instances |
| 1.3.6.1.4.1.7244.2.27.1.1.1 | RowagentTunnelIPV6Entry | not-accessible | current | |
| 1.3.6.1.4.1.7244.2.27.1.1.1.1 | ColumnagentTunnelID | not-accessible | current | The tunnel ID is associated with Internal Interface number which is generated when we create a tunnel, and is used to configure the tunnel. |
| 1.3.6.1.4.1.7244.2.27.1.1.1.2 | ColumnagentTunnelIfIndex | read-only | current | The external interface of the tunnel is associted with internal interface. The tunnel ID associated with Internal Interface number is generated when we create … |
| 1.3.6.1.4.1.7244.2.27.1.1.1.3 | ColumnagentTunnelMode | read-create | current | Specifies the type of Tunnel either undefined, 6over4 or 6to4. The default value is undefined. It supports 6over4 which supports an assigned IPV6 address, an I… |
| 1.3.6.1.4.1.7244.2.27.1.1.1.4 | ColumnagentTunnelLocalIP4Addr | read-write | current | The address of the Local endpoint of the tunnel i.e. the source address used in the outer IP header. It is 0.0.0.0 if unknown or the tunnel is over IPv6. |
| 1.3.6.1.4.1.7244.2.27.1.1.1.5 | ColumnagentTunnelRemoteIP4Addr | read-write | current | The address of the Remote endpoint of the tunnel i.e. the destination address used in the outer IP header. It is 0.0.0.0 if the tunnel is unknown or IPv6 addre… |
| 1.3.6.1.4.1.7244.2.27.1.1.1.6 | ColumnagentTunnelLocalIfIndex | read-write | current | Specifies the interface for IPv6 Tunnel Source |
| 1.3.6.1.4.1.7244.2.27.1.1.1.7 | ColumnagentTunnelStatus | read-create | current | Status of this instance.Row can be added or deleted by setting the value to createAndGo/destroy active(1) - this Tunnel instance is active createAndGo(4) - set… |
| 1.3.6.1.4.1.7244.2.27.1.1.1.8 | ColumnagentTunnelIcmpUnreachableMode | read-create | current | Specifies the Mode of Sending ICMPv6 Unreachable messages on this tunnel interface. |
| 1.3.6.1.4.1.7244.2.27.1.2 | TableagentTunnelIPV6PrefixTable | not-accessible | current | A table of the IPV6 prefixes associated with tunnel instances |
| 1.3.6.1.4.1.7244.2.27.1.2.1 | RowagentTunnelIPV6PrefixEntry | not-accessible | current | |
| 1.3.6.1.4.1.7244.2.27.1.2.1.1 | ColumnagentTunnelIPV6PrefixPrefix | not-accessible | current | The prefix associated with the tunnel interface. The data type is used to model the IPV6 address. It is a binary string of 16 octects in network byte-order. It… |
| 1.3.6.1.4.1.7244.2.27.1.2.1.2 | ColumnagentTunnelIPV6PrefixPrefixLen | not-accessible | current | The length of the prefix (in bits). |
| 1.3.6.1.4.1.7244.2.27.1.2.1.3 | ColumnagentTunnelIPV6PrefixStatus | read-create | current | Status of this instance.Row can be added or deleted by setting the value to createAndGo/destroy active(1) - this Tunnel instance is active createAndGo(4) - set… |